threads, indows, iber? [a] a Using handcoded assembler implementation *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Generating a Unix-style Makefile Writing Makefile for Coro::State Generating a Unix-style Makefile Writing Makefile for Coro::Event Generating a Unix-style Makefile Writing Makefile for Coro::EV Generating a Unix-style Makefile Writing Makefile for Coro + : running make + '[' -n '' ']' + NPROCS=8 + make -j8 'OPTIMIZE=-pipe -Wall -g -O2' 'CP=/bin/cp -p' make: Entering directory `/usr/src/RPM/BUILD/Coro-6.49' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' Running Mkbootstrap for Coro::State () "/usr/bin/perl" "/usr/share/perl5/ExtUtils/xsubpp" -typemap "/usr/share/perl5/ExtUtils/typemap" -typemap "typemap" State.xs > State.xsc && mv State.xsc State.c cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro.pm blib/lib/Coro.pm cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm chmod 644 "State.bs" Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3843 gcc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Wall -g -O2 -DVERSION=\"6.49\" -DXS_VERSION=\"6.49\" -fPIC "-I/usr/lib64/perl5/CORE" -DCORO_ASM -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c State.xs: In function 'coro_cv_free': State.xs:630:12: warning: unused variable 'padlist' [-Wunused-variable] PADLIST *padlist; ^ State.xs: At top level: State.xs:1502:1: warning: "/*" within comment [-Wcomment] /* that are not, uhm, essential */ ^ In file included from libcoro/coro.c:41:0, from State.xs:6: State.xs: In function 'cctx_destroy': libcoro/coro.h:381:28: warning: statement with no effect [-Wunused-value] # define coro_destroy(ctx) (void *)(ctx) ^ State.xs:1608:3: note: in expansion of macro 'coro_destroy' coro_destroy (&cctx->cctx); ^ State.xs: In function 'transfer': State.xs:99:26: warning: unused variable 'stacklevel_dummy' [-Wunused-variable] # define dSTACKLEVEL int stacklevel_dummy ^ State.xs:1682:3: note: in expansion of macro 'dSTACKLEVEL' dSTACKLEVEL; ^ State.xs: In function 'api_execute_slf': State.xs:2839:36: warning: "/*" within comment [-Wcomment] /*PL_op->op_type = OP_CUSTOM; /* we do behave like entersub still */ ^ In file included from State.xs:13:0: State.xs: In function 'coro_aio_req_xs': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.xs:3475:3: note: in expansion of macro 'dXSARGS' dXSARGS; ^ State.xs: In function 'jit_init': State.xs:3576:7: warning: variable 'count' set but not used [-Wunused-but-set-variable] int count; ^ State.c: In function 'XS_Coro__State_new': State.c:3777:7: warning: unused variable 'klass' [-Wunused-variable] SV * klass = ST(0) ^ In file included from State.xs:13:0: State.c: In function 'XS_Coro__State_transfer': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:3792:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro__State_clone': State.c:3811:14: warning: unused variable 'coro' [-Wunused-variable] Coro__State coro = SvSTATE (ST(0)) ^ In file included from State.xs:13:0: State.c: In function 'XS_Coro_join': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4385:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_terminate': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4399:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_cancel': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4413:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_schedule': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4446:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_schedule_to': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4460:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_cede_to': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4474:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_cede': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4488:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_cede_notself': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4502:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_nready': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4624:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro__pool_handler': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4675:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro_async_pool': State.c:4695:7: warning: unused variable 'cv' [-Wunused-variable] SV * cv = ST(0) ^ State.c: In function 'XS_Coro__Semaphore_new': State.c:4816:7: warning: unused variable 'klass' [-Wunused-variable] SV * klass = ST(0) ^ In file included from State.xs:13:0: State.c: In function 'XS_Coro__Semaphore_down': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4920:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro__Semaphore_wait': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:4934:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro__Signal_new': State.c:5052:7: warning: unused variable 'klass' [-Wunused-variable] SV * klass = ST(0) ^ In file included from State.xs:13:0: State.c: In function 'XS_Coro__Signal_wait': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:5070:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro__AnyEvent__schedule': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ State.c:5148:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ State.c: In function 'XS_Coro__Util_gettimeofday': /usr/lib64/perl5/CORE/XSUB.h:193:28: warning: unused variable 'targ' [-Wunused-variable] #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \ ^ State.c:5288:2: note: in expansion of macro 'dXSTARG' dXSTARG; ^ State.c:5287:5: warning: unused variable 'RETVAL' [-Wunused-variable] NV RETVAL; ^ In file included from /usr/lib64/perl5/CORE/perl.h:3735:0, from State.xs:12: State.xs: In function 'boot_Coro__State': /usr/lib64/perl5/CORE/gv.h:104:20: warning: value computed is not used [-Wunused-value] #define GvSVn(gv) (*(GvGP(gv)->gp_sv ? \ ^ /usr/lib64/perl5/CORE/perl.h:1306:16: note: in expansion of macro 'GvSVn' # define DEFSV GvSVn(PL_defgv) ^ State.xs:3630:9: note: in expansion of macro 'DEFSV' DEFSV; ^ /usr/lib64/perl5/CORE/gv.h:104:20: warning: value computed is not used [-Wunused-value] #define GvSVn(gv) (*(GvGP(gv)->gp_sv ? \ ^ /usr/lib64/perl5/CORE/perl.h:1272:15: note: in expansion of macro 'GvSVn' #define ERRSV GvSVn(PL_errgv) ^ State.xs:3631:9: note: in expansion of macro 'ERRSV' ERRSV; ^ In file included from State.xs:16:0: State.c: At top level: schmorp.h:112:1: warning: 's_signum_croak' defined but not used [-Wunused-function] s_signum_croak (SV *sig) ^ schmorp.h:147:1: warning: 's_fileno_croak' defined but not used [-Wunused-function] s_fileno_croak (SV *fh, int wr) ^ schmorp.h:390:1: warning: 's_epipe_destroy' defined but not used [-Wunused-function] s_epipe_destroy (s_epipe *epp) ^ schmorp.h:403:1: warning: 's_epipe_signal' defined but not used [-Wunused-function] s_epipe_signal (s_epipe *epp) ^ schmorp.h:428:1: warning: 's_epipe_drain' defined but not used [-Wunused-function] s_epipe_drain (s_epipe *epp) ^ schmorp.h:442:1: warning: 's_epipe_renew' defined but not used [-Wunused-function] s_epipe_renew (s_epipe *epp) ^ schmorp.h:474:1: warning: 's_epipe_wait' defined but not used [-Wunused-function] s_epipe_wait (s_epipe *epp) ^ In file included from State.xs:108:0: CoroAPI.h:83:24: warning: 'GCoroAPI' defined but not used [-Wunused-variable] static struct CoroAPI *GCoroAPI; ^ State.xs:149:12: warning: 'rv_diehook' defined but not used [-Wunused-variable] static SV *rv_diehook; ^ State.xs:150:12: warning: 'rv_warnhook' defined but not used [-Wunused-variable] static SV *rv_warnhook; ^ State.xs:1833:15: warning: 'coro_sigelem_vtbl' defined but not used [-Wunused-variable] static MGVTBL coro_sigelem_vtbl = { ^ In file included from /usr/lib64/perl5/CORE/perl.h:5550:0, from State.xs:12: State.c: In function 'XS_Coro__State_rss': /usr/lib64/perl5/CORE/embed.h:673:24: warning: 'RETVAL' may be used uninitialized in this function [-Wmaybe-uninitialized] #define sv_setuv(a,b) Perl_sv_setuv(aTHX_ a,b) ^ State.c:4146:5: note: 'RETVAL' was declared here UV RETVAL; ^ rm -f ../blib/arch/auto/Coro/State/State.so gcc -shared -pipe -Wall -g -O2 -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ -L/usr/lib64/perl5/CORE -lperl -lpthread chmod 755 ../blib/arch/auto/Coro/State/State.so "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Event' "/usr/bin/perl" "/usr/share/perl5/ExtUtils/xsubpp" -typemap "/usr/share/perl5/ExtUtils/typemap" Event.xs > Event.xsc && mv Event.xsc Event.c Running Mkbootstrap for Coro::Event () chmod 644 "Event.bs" cp Event.pm ../blib/lib/Coro/Event.pm gcc -c -I/usr/lib64/perl5/Event -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Wall -g -O2 -DVERSION=\"6.49\" -DXS_VERSION=\"6.49\" -fPIC "-I/usr/lib64/perl5/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so gcc -shared -pipe -Wall -g -O2 -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ -L/usr/lib64/perl5/CORE -lperl -lpthread chmod 755 ../blib/arch/auto/Coro/Event/Event.so "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Event' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/EV' "/usr/bin/perl" "/usr/share/perl5/ExtUtils/xsubpp" -typemap "/usr/share/perl5/ExtUtils/typemap" EV.xs > EV.xsc && mv EV.xsc EV.c Running Mkbootstrap for Coro::EV () chmod 644 "EV.bs" gcc -c -I/usr/lib64/perl5/EV -I/usr/lib64/perl5 -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Wall -g -O2 -DVERSION=\"6.49\" -DXS_VERSION=\"6.49\" -fPIC "-I/usr/lib64/perl5/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c cp EV.pm ../blib/lib/Coro/EV.pm In file included from EV.xs:3:0: EV.c: In function 'XS_Coro__EV_timed_io_once': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ EV.c:495:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ EV.c: In function 'XS_Coro__EV_timer_once': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ EV.c:509:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ EV.c: In function 'XS_Coro__EV__poll': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ EV.c:523:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ EV.c: In function 'XS_Coro__EV__readable_ev': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: variable 'items' set but not used [-Wunused-but-set-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ EV.c:537:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ EV.c: In function 'XS_Coro__EV__writable_ev': /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: variable 'items' set but not used [-Wunused-but-set-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' dSP; dAXMARK; dITEMS ^ EV.c:552:11: note: in expansion of macro 'dXSARGS' dVAR; dXSARGS; ^ In file included from EV.xs:9:0: EV.xs: In function 'boot_Coro__EV': /usr/lib64/perl5/EV/EVAPI.h:118:36: warning: statement with no effect [-Wunused-value] # define EV_DEFAULT GEVAPI->default_loop ^ EV.xs:303:9: note: in expansion of macro 'EV_DEFAULT' EV_DEFAULT; /* make sure it is initialised */ ^ rm -f ../blib/arch/auto/Coro/EV/EV.so gcc -shared -pipe -Wall -g -O2 -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ -L/usr/lib64/perl5/CORE -lperl -lpthread chmod 755 ../blib/arch/auto/Coro/EV/EV.so "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/EV' make: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49' + : running tests + LD_BIND_NOW=1 + PERL_DL_NONLAZY=1 + /usr/bin/make test 'CP=/bin/cp -p' make: Entering directory `/usr/src/RPM/BUILD/Coro-6.49' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' Running Mkbootstrap for Coro::State () chmod 644 "State.bs" make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Event' Running Mkbootstrap for Coro::Event () chmod 644 "Event.bs" make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Event' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/EV' Running Mkbootstrap for Coro::EV () chmod 644 "EV.bs" make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... ok t/01_process.t ........ ok t/02_channel.t ........ ok t/03_channel.t ........ ok t/04_rwlock.t ......... ok t/05_specific.t ....... ok t/06_prio.t ........... ok t/07_eval.t ........... ok t/08_join.t ........... ok t/10_bugs.t ........... ok t/11_deadlock.t ....... ok t/12_exit.t ........... ok t/13_diewarn.t ........ skipped: (no reason given) t/14_load.t ........... ok t/15_semaphore.t ...... ok t/16_signal.t ......... ok t/17_rouse.t .......... ok t/18_winder.t ......... ok t/19_handle.t ......... ok t/20_mutual_cancel.t .. ok All tests successful. Files=20, Tests=189, 0 wallclock secs ( 0.06 usr 0.02 sys + 0.32 cusr 0.04 csys = 0.44 CPU) Result: PASS make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' No tests defined for Coro::State extension. make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Event' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... ok t/01_unblock.t .. ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr 0.01 csys = 0.10 CPU) Result: PASS make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Event' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... ok t/01_unblock.t .. ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.08 cusr 0.02 csys = 0.13 CPU) Result: PASS make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/EV' make: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49' + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.53496 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/perl-Coro-buildroot + : + /bin/rm -rf -- /usr/src/tmp/perl-Coro-buildroot + cd Coro-6.49 + perl_vendor_install + /bin/grep -qs -Ew Build_PL Build.PL + /bin/grep -qs -Ew '(dist|module)_name' Build.PL + _perl_vendor_MM_install + : installing + make 'INSTALL=/bin/install -p' 'CP=/bin/cp -p' DESTDIR=/usr/src/tmp/perl-Coro-buildroot PREFIX=/usr INSTALLDIRS=vendor pure_install make: Entering directory `/usr/src/RPM/BUILD/Coro-6.49' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Coro' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/Event' make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/Event' make[1]: Entering directory `/usr/src/RPM/BUILD/Coro-6.49/EV' make[1]: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49/EV' Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/auto/Coro/EV/EV.so Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/auto/Coro/Event/Event.so Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/auto/Coro/State/State.so Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/EV.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Event.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Intro.pod Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/BDB.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Handle.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/LWP.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Specific.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/AIO.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Signal.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/State.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Debug.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/jit-amd64-unix.pl Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Semaphore.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Channel.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/jit-x86-unix.pl Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Select.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Storable.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/MakeMaker.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Util.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/SemaphoreSet.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/CoroAPI.h Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Timer.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/RWLock.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Socket.pm Installing /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/AnyEvent.pm make: Leaving directory `/usr/src/RPM/BUILD/Coro-6.49' + _perl_vendor_check_buildroot + : prompting for files that contain /usr/local + find /usr/src/tmp/perl-Coro-buildroot -type f -exec /bin/grep -FH /usr/local '{}' ';' + : prompting for files that contain /tmp + find /usr/src/tmp/perl-Coro-buildroot -type f -not -name .packlist -exec /bin/grep -FH /tmp '{}' ';' /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Socket.pm: Local => "/tmp/socket", /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Util.pm: my $alphachannel = do_it "/tmp/img.png"; /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Debug.pm: our $server = new_unix_server Coro::Debug "/tmp/socketpath"; /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Debug.pm: $ socat readline unix:/tmp/socketpath /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Debug.pm: our $server = new_unix_server Coro::Debug "/tmp/somepath"; /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Debug.pm: socat readline:history=/tmp/hist.corodebug /path/to/socket /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Intro.pod: my $shell = new_unix_server Coro::Debug "/tmp/myshell"; /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Intro.pod:socket in F. You can use the F program to access it: /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Intro.pod: # socat readline /tmp/myshell + _perl_vendor_save_prereq + /bin/grep -F 'perl(' .perl.req perl(AnyEvent)>=5 perl(Guard)>=0.5 perl(Scalar::Util)>=0 perl(Storable)>=2.15 perl(common::sense)>=0 + /bin/grep -F 'perl(' .perl.req + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/perl-Coro-buildroot (auto) removed './usr/lib64/perl5/auto/Coro/.packlist' mode of './usr/lib64/perl5/auto/Coro/State/State.so' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--) mode of './usr/lib64/perl5/auto/Coro/Event/Event.so' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--) mode of './usr/lib64/perl5/auto/Coro/EV/EV.so' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--) Verifying and fixing files in /usr/src/tmp/perl-Coro-buildroot (binconfig,pkgconfig,libtool,desktop) Compressing files in /usr/src/tmp/perl-Coro-buildroot (auto) Adjusting library links in /usr/src/tmp/perl-Coro-buildroot ./usr/lib64: Verifying ELF objects in /usr/src/tmp/perl-Coro-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=normal) Hardlinking identical .pyc and .pyo files Processing files: perl-Coro-6.49-alt2.1 Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.41099 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd Coro-6.49 + DOCDIR=/usr/src/tmp/perl-Coro-buildroot/usr/share/doc/perl-Coro-6.49 + export DOCDIR + rm -rf /usr/src/tmp/perl-Coro-buildroot/usr/share/doc/perl-Coro-6.49 + /bin/mkdir -p /usr/src/tmp/perl-Coro-buildroot/usr/share/doc/perl-Coro-6.49 + cp -prL Changes COPYING LICENSE.libcoro README /usr/src/tmp/perl-Coro-buildroot/usr/share/doc/perl-Coro-6.49 + chmod -R go-w /usr/src/tmp/perl-Coro-buildroot/usr/share/doc/perl-Coro-6.49 + chmod -R a+rX /usr/src/tmp/perl-Coro-buildroot/usr/share/doc/perl-Coro-6.49 + exit 0 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.6djToa find-provides: running scripts (alternatives,debuginfo,lib,pam,perl,pkgconfig,python,ruby,shell) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.iUL8H6 find-requires: running scripts (cpp,debuginfo,files,lib,pam,perl,pkgconfig,pkgconfiglib,python,rpmlib,ruby,shebang,shell,static,symlinks) /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/CoroAPI.h:4:20: fatal error: EXTERN.h: No such file or directory compilation terminated. cpp.req: /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/CoroAPI.h: cpp failed, trying c++ mode x86_64-alt-linux-cpp: error trying to exec 'cc1plus': execvp: No such file or directory cpp.req: WARNING: /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/CoroAPI.h: cpp failed /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/AIO.pm syntax OK # perl(Coro/EV.pm) at line 187 (depth 8) inside eval SKIP # perl(Coro/Event.pm) at line 213 (depth 11) inside eval SKIP /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/AnyEvent.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/BDB.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Channel.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Debug.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/EV.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Event.pm syntax OK # perl(Coro/Event.pm) at line 434 (depth 8) inside eval SKIP # perl(Coro/EV.pm) at line 444 (depth 11) inside eval SKIP /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Handle.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/LWP.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/MakeMaker.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/RWLock.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Select.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Semaphore.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/SemaphoreSet.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Signal.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Socket.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Specific.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/State.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Storable.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Timer.pm syntax OK # perl(PerlIO.pm) at line 200 (depth 11) inside eval SKIP # perl(PerlIO/scalar.pm) at line 200 (depth 11) inside eval SKIP /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/Util.pm syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/jit-amd64-unix.pl syntax OK /usr/src/tmp/perl-Coro-buildroot/usr/lib64/perl5/Coro/jit-x86-unix.pl syntax OK Provides: perl(Coro.pm) = 6.490, perl(Coro/AIO.pm) = 6.490, perl(Coro/AnyEvent.pm) = 6.490, perl(Coro/BDB.pm) = 6.490, perl(Coro/Channel.pm) = 6.490, perl(Coro/Debug.pm) = 6.490, perl(Coro/EV.pm) = 6.490, perl(Coro/Event.pm) = 6.490, perl(Coro/Handle.pm) = 6.490, perl(Coro/LWP.pm) = 6.490, perl(Coro/MakeMaker.pm) = 6.490, perl(Coro/RWLock.pm) = 6.490, perl(Coro/Select.pm) = 6.490, perl(Coro/Semaphore.pm) = 6.490, perl(Coro/SemaphoreSet.pm) = 6.490, perl(Coro/Signal.pm) = 6.490, perl(Coro/Socket.pm) = 6.490, perl(Coro/Specific.pm) = 6.490, perl(Coro/State.pm) = 6.490, perl(Coro/Storable.pm) = 6.490, perl(Coro/Timer.pm) = 6.490, perl(Coro/Util.pm) = 6.490, perl(Coro/jit-amd64-unix.pl), perl(Coro/jit-x86-unix.pl) Requires: /usr/bin/perl, /usr/lib64/perl5, libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.4)(64bit), libperl-5.22.so()(64bit) >= set:ohx0rC4OZ4P7Zr6YwW9fO5qoxeKqZs2cm2QlTfhkCTL5US8kSVOxV4HWtAiMAIzeZo4uIW0Zv6zd8yxvjkA6RjOT8BLJmPukN2Z8hqR57zVZHjbUuRJoM230Ni4I8w6oRpvzGCM4eZnheC4lCwhBtf4OjbZvD2vlQgZhZ7Cd0VGVRIZ73H3jxcuDJZu0LjejHCZK6HOkwpL9IbSHQJwZC3wyPT66hvP0GXC7CA4gHWf1qYqqxiZwZmFpDxWZs77oGBmFiFjr5kt98ZoCQ9HdbP1wHvKbbeYkoczL7JCM2tAZj860Fs3, libpthread.so.0(GLIBC_2.2.5)(64bit), perl(AnyEvent.pm) >= 5.0, perl(AnyEvent/AIO.pm), perl(AnyEvent/BDB.pm), perl(AnyEvent/DNS.pm), perl(AnyEvent/Socket.pm), perl(AnyEvent/Util.pm), perl(BDB.pm), perl(Config.pm), perl(EV.pm), perl(Errno.pm), perl(Event.pm), perl(Guard.pm) >= 0.500, perl(IO/AIO.pm) >= 3.100, perl(IO/Socket/INET.pm), perl(Net/Config.pm), perl(Net/FTP.pm), perl(Net/HTTP.pm), perl(Net/NNTP.pm), perl(PerlIO.pm), perl(PerlIO/scalar.pm), perl(Scalar/Util.pm), perl(Socket.pm), perl(Storable.pm) >= 2.150, perl(XSLoader.pm), perl(base.pm), perl(common/sense.pm), perl(overload.pm), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.q06PFe Creating perl-Coro-debuginfo package Processing files: perl-Coro-debuginfo-6.49-alt2.1 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.mQIdwq find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.O4y0PF find-requires: running scripts (debuginfo) Requires: perl-Coro = 6.49-alt2.1, debug64(libc.so.6), debug64(libperl-5.22.so), debug64(libpthread.so.0) Wrote: /usr/src/RPM/RPMS/x86_64/perl-Coro-6.49-alt2.1.x86_64.rpm Wrote: /usr/src/RPM/RPMS/x86_64/perl-Coro-debuginfo-6.49-alt2.1.x86_64.rpm 9.90user 1.71system 0:17.75elapsed 65%CPU (0avgtext+0avgdata 80752maxresident)k 0inputs+0outputs (0major+504671minor)pagefaults 0swaps 15.52user 4.55system 0:26.99elapsed 74%CPU (0avgtext+0avgdata 122204maxresident)k 0inputs+0outputs (0major+761996minor)pagefaults 0swaps