<86>Apr 13 08:11:09 userdel[73597]: delete user 'rooter' <86>Apr 13 08:11:09 userdel[73597]: removed group 'rooter' owned by 'rooter' <86>Apr 13 08:11:09 groupadd[73604]: group added to /etc/group: name=rooter, GID=1796 <86>Apr 13 08:11:09 groupadd[73604]: group added to /etc/gshadow: name=rooter <86>Apr 13 08:11:09 groupadd[73604]: new group: name=rooter, GID=1796 <86>Apr 13 08:11:09 useradd[73610]: new user: name=rooter, UID=1796, GID=1796, home=/root, shell=/bin/bash, from=none <86>Apr 13 08:11:09 userdel[73620]: delete user 'builder' <86>Apr 13 08:11:09 userdel[73620]: removed group 'builder' owned by 'builder' <86>Apr 13 08:11:09 userdel[73620]: removed shadow group 'builder' owned by 'builder' <86>Apr 13 08:11:09 groupadd[73627]: group added to /etc/group: name=builder, GID=1797 <86>Apr 13 08:11:09 groupadd[73627]: group added to /etc/gshadow: name=builder <86>Apr 13 08:11:09 groupadd[73627]: new group: name=builder, GID=1797 <86>Apr 13 08:11:09 useradd[73633]: new user: name=builder, UID=1797, GID=1797, home=/usr/src, shell=/bin/bash, from=none <13>Apr 13 08:11:16 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432033 installed <13>Apr 13 08:11:16 rpmi: libgdbm-1.8.3-alt10 sisyphus+278100.1600.1.1 1626059138 installed <13>Apr 13 08:11:16 rpmi: libexpat-2.5.0-alt1 sisyphus+309227.100.1.1 1667075766 installed <13>Apr 13 08:11:16 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962878 installed <13>Apr 13 08:11:16 rpmi: libp11-kit-1:0.25.3-alt2 sisyphus+336533.100.1.1 1702645575 installed <13>Apr 13 08:11:16 rpmi: libtasn1-4.19.0-alt3 sisyphus+327816.100.1.1 1692802618 installed <13>Apr 13 08:11:16 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Apr 13 08:11:16 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Apr 13 08:11:16 rpmi: ca-certificates-2024.02.24-alt1 sisyphus+341362.100.1.1 1708791001 installed <13>Apr 13 08:11:16 rpmi: ca-trust-0.2.0-alt1 sisyphus+344843.100.1.1 1712743326 installed <13>Apr 13 08:11:16 rpmi: p11-kit-trust-1:0.25.3-alt2 sisyphus+336533.100.1.1 1702645575 installed <13>Apr 13 08:11:16 rpmi: libcrypto3-3.1.5-alt2 sisyphus+343320.140.3.1 1711982452 installed <13>Apr 13 08:11:16 rpmi: libssl3-3.1.5-alt2 sisyphus+343320.140.3.1 1711982452 installed <13>Apr 13 08:11:16 rpmi: python3-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Apr 13 08:11:17 rpmi: python3-base-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Apr 13 08:11:17 rpmi: python3-module-py3dephell-0.1.0-alt2 sisyphus+328191.600.5.1 1693609196 installed <13>Apr 13 08:11:17 rpmi: tests-for-installed-python3-pkgs-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>Apr 13 08:11:17 rpmi: rpm-build-python3-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>Apr 13 08:11:17 rpmi: rpm-build-tcl-0.6.2-alt1 sisyphus+299320.100.1.1 1651401392 installed <13>Apr 13 08:11:20 rpmi: xorg-proto-devel-2024.1-alt1 sisyphus+343583.40.1.1 1711440649 installed <13>Apr 13 08:11:21 rpmi: libjpeg-2:3.0.2-alt2.1 sisyphus+340135.100.1.1 1707449053 installed <13>Apr 13 08:11:21 rpmi: libpng16-1.6.42-alt2 sisyphus+339555.100.1.1 1706781690 installed <13>Apr 13 08:11:21 rpmi: libwayland-client-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Apr 13 08:11:21 rpmi: gobject-introspection-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Apr 13 08:11:21 rpmi: libatk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Apr 13 08:11:21 rpmi: libglvnd-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Apr 13 08:11:21 rpmi: libboost_system1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:21 rpmi: xml-utils-1:2.12.5-alt1 sisyphus+342268.100.2.1 1710156418 installed <13>Apr 13 08:11:21 rpmi: liblcms2-2.16-alt1 sisyphus+335676.100.1.1 1701682605 installed <13>Apr 13 08:11:21 rpmi: gobject-introspection-x11-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Apr 13 08:11:21 rpmi: perl-HTTP-Date-6.06-alt1 sisyphus+324527.100.1.1 1688834564 installed <13>Apr 13 08:11:21 rpmi: perl-XML-NamespaceSupport-1.12-alt1 1491296348 installed <13>Apr 13 08:11:21 rpmi: zlib-devel-1.3.1-alt1 sisyphus+342532.100.1.1 1710232285 installed <13>Apr 13 08:11:21 rpmi: libtcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Apr 13 08:11:21 rpmi: tcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Apr 13 08:11:21 rpmi: libkmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Apr 13 08:11:21 rpmi: libwebp7-1.3.2-alt1 sisyphus+329541.100.1.1 1694676226 installed <13>Apr 13 08:11:21 rpmi: libICE-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Apr 13 08:11:21 rpmi: libfribidi-1.0.13-alt1 sisyphus+320646.100.1.1 1684307083 installed <13>Apr 13 08:11:21 rpmi: libSM-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Apr 13 08:11:21 rpmi: rpm-build-gir-0.7.3-alt3.1 sisyphus+319393.100.1.1 1682538783 installed <13>Apr 13 08:11:21 rpmi: libatk-gir-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Apr 13 08:11:21 rpmi: libepoxy-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Apr 13 08:11:21 rpmi: libusb-1.0.26-alt3 sisyphus+340691.100.3.1 1708466436 installed <13>Apr 13 08:11:21 rpmi: libopenblas-0.3.26-alt1 sisyphus+339579.140.3.1 1706872442 installed <13>Apr 13 08:11:21 rpmi: libwayland-server-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Apr 13 08:11:21 rpmi: perl-LWP-MediaTypes-6.04-alt1 sisyphus+225468.100.1.1 1553186684 installed <13>Apr 13 08:11:21 rpmi: perl-Compress-Raw-Zlib-2.206-alt1 sisyphus+335067.600.1.1 1700901614 installed <13>Apr 13 08:11:21 rpmi: perl-libnet-1:3.15-alt1 sisyphus+317310.100.1.1 1679580208 installed <13>Apr 13 08:11:21 rpmi: perl-XML-SAX-Base-1.09-alt1 1494364363 installed <13>Apr 13 08:11:21 rpmi: gtk-builder-convert-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Apr 13 08:11:21 rpmi: libgirepository1.0-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Apr 13 08:11:21 rpmi: python3-module-Pygments-2.17.2-alt1 sisyphus+334864.100.2.1 1701773787 installed <13>Apr 13 08:11:21 rpmi: libsqlite3-3.44.2-alt1 sisyphus+335409.100.3.3 1701347861 installed <13>Apr 13 08:11:21 rpmi: libnspr-1:4.35-alt1 sisyphus+308164.100.1.1 1665397042 installed <13>Apr 13 08:11:21 rpmi: python3-module-pkg_resources-1:69.2.0-alt1 sisyphus+342809.100.1.1 1710522388 installed <13>Apr 13 08:11:22 rpmi: libicu74-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>Apr 13 08:11:22 rpmi: libquadmath0-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Apr 13 08:11:22 rpmi: libgomp1-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Apr 13 08:11:22 rpmi: libltdl7-2.4.7-alt5 sisyphus+341963.200.3.1 1711659248 installed <13>Apr 13 08:11:22 rpmi: libopenjpeg2.0-2.5.2-alt1 sisyphus+341637.100.1.1 1709150019 installed <13>Apr 13 08:11:22 rpmi: libverto-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Apr 13 08:11:22 rpmi: libcom_err-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Apr 13 08:11:22 rpmi: libbrotlicommon-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Apr 13 08:11:22 rpmi: libbrotlidec-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Apr 13 08:11:22 rpmi: libgraphite2-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Apr 13 08:11:22 rpmi: libharfbuzz-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>Apr 13 08:11:22 rpmi: libfreetype-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Apr 13 08:11:22 rpmi: libfontconfig1-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Apr 13 08:11:22 rpmi: libharfbuzz-gobject-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>Apr 13 08:11:22 rpmi: libharfbuzz-gir-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>Apr 13 08:11:22 rpmi: libXau-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Apr 13 08:11:22 rpmi: libXau-devel-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Apr 13 08:11:22 rpmi: fontconfig-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed Updating fonts cache: <29>Apr 13 08:11:23 fontconfig: Updating fonts cache: succeeded [ DONE ] <13>Apr 13 08:11:23 rpmi: libraqm-0.7.1-alt1 sisyphus+279320.100.1.2 1626503405 installed <13>Apr 13 08:11:23 rpmi: libharfbuzz-icu-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>Apr 13 08:11:23 rpmi: libgraphite2-devel-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Apr 13 08:11:23 rpmi: libbrotlienc-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Apr 13 08:11:23 rpmi: libcom_err-devel-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Apr 13 08:11:23 rpmi: libverto-devel-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Apr 13 08:11:23 rpmi: libraw-0.21.2-alt1 sisyphus+336806.100.1.1 1703007433 installed <13>Apr 13 08:11:23 rpmi: libquadmath13-devel-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Apr 13 08:11:23 rpmi: libquadmath-devel-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Apr 13 08:11:23 rpmi: libgfortran5-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Apr 13 08:11:23 rpmi: icu-utils-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>Apr 13 08:11:23 rpmi: libicu-devel-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>Apr 13 08:11:23 rpmi: libnss-3.99-alt1 sisyphus+344230.420.10.1 1712506109 installed <13>Apr 13 08:11:23 rpmi: python3-module-nss-1.0.1-alt7 sisyphus+333513.61400.73.1 1704655181 installed <13>Apr 13 08:11:23 rpmi: libICE-devel-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Apr 13 08:11:23 rpmi: libSM-devel-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Apr 13 08:11:23 rpmi: kmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Apr 13 08:11:23 rpmi: tcl-devel-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Apr 13 08:11:23 rpmi: libpng-devel-1.6.42-alt2 sisyphus+339555.100.1.1 1706781690 installed <13>Apr 13 08:11:23 rpmi: perl-File-Listing-6.16-alt1 sisyphus+325783.100.1.1 1690559356 installed <13>Apr 13 08:11:23 rpmi: libboost_atomic1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:23 rpmi: libboost_contract1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:23 rpmi: libboost_chrono1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:23 rpmi: libboost_timer1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:23 rpmi: libboost_thread1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:23 rpmi: libboost_type_erasure1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:23 rpmi: libOpenGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Apr 13 08:11:23 rpmi: libGLES-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Apr 13 08:11:23 rpmi: libwayland-cursor-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Apr 13 08:11:23 rpmi: libwayland-egl-4:18.1.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Apr 13 08:11:23 rpmi: groff-base-1.22.3-alt2 sisyphus+275306.100.2.1 1624538359 installed <13>Apr 13 08:11:23 rpmi: libpipeline-1.5.7-alt1_1 sisyphus+312433.100.1.1 1671879776 installed <13>Apr 13 08:11:23 rpmi: libmodbus-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Apr 13 08:11:23 rpmi: openldap-common-2.6.7-alt1 sisyphus+343335.200.1.1 1711113916 installed <13>Apr 13 08:11:23 rpmi: wayland-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Apr 13 08:11:23 rpmi: libwayland-client-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Apr 13 08:11:23 rpmi: libxkbcommon-1.7.0-alt1.1 sisyphus+343672.100.1.1 1711490815 installed <13>Apr 13 08:11:23 rpmi: libgudev-1:238-alt1 sisyphus+324364.100.1.1 1688646145 installed <13>Apr 13 08:11:23 rpmi: libboost_python3-1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:23 rpmi: libxblas-1.0.248-alt2 sisyphus+285045.40.2.1 1631388462 installed <13>Apr 13 08:11:24 rpmi: liblapack-1:3.8.0-alt7 sisyphus+340675.300.1.1 1707908362 installed <13>Apr 13 08:11:24 rpmi: python3-module-numpy-1:1.26.4-alt1 sisyphus+341164.200.2.1 1708505996 installed <13>Apr 13 08:11:24 rpmi: libboost_numpy3-1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:24 rpmi: libxshmfence-1.3.2-alt1 sisyphus+311428.400.1.1 1670577529 installed <13>Apr 13 08:11:24 rpmi: libpciaccess-1:0.18.1-alt1 sisyphus+343583.300.1.1 1711440792 installed <13>Apr 13 08:11:24 rpmi: libdrm-1:2.4.120-alt1 sisyphus+338137.100.1.2 1705653180 installed <13>Apr 13 08:11:24 rpmi: less-633-alt1 sisyphus+328181.300.2.1 1693321749 installed <13>Apr 13 08:11:24 rpmi: perl-Try-Tiny-0.31-alt1 sisyphus+290597.100.1.1 1637915507 installed <13>Apr 13 08:11:24 rpmi: perl-IO-Socket-IP-0.42-alt1 sisyphus+325815.100.1.2 1690571193 installed <13>Apr 13 08:11:24 rpmi: perl-Module-Load-0.36-alt1 sisyphus+258992.100.1.1 1601543407 installed <13>Apr 13 08:11:24 rpmi: perl-Compress-Raw-Bzip2-2.210-alt1 sisyphus+343108.100.1.3 1710881036 installed <13>Apr 13 08:11:24 rpmi: perl-IO-Compress-Brotli-2:0.004001-alt3 sisyphus+335067.1200.1.1 1700901700 installed <13>Apr 13 08:11:24 rpmi: perl-Clone-0.46-alt1 sisyphus+335067.1100.1.1 1700901674 installed <13>Apr 13 08:11:24 rpmi: perl-HTML-Tagset-3.24-alt1 sisyphus+343117.100.1.3 1710883587 installed <13>Apr 13 08:11:24 rpmi: perl-Term-ANSIColor-5.01-alt1 sisyphus+244783.100.1.2 1579747505 installed <13>Apr 13 08:11:24 rpmi: perl-Data-Dump-1.25-alt1 sisyphus+276551.100.1.1 1625126880 installed <13>Apr 13 08:11:24 rpmi: perl-Filter-1.64-alt1 sisyphus+335067.400.1.1 1700901530 installed <13>Apr 13 08:11:24 rpmi: perl-Encode-3.21-alt1 sisyphus+343095.100.1.1 1710875480 installed <13>Apr 13 08:11:24 rpmi: perl-URI-5.27-alt1 sisyphus+340901.100.1.1 1708180683 installed <13>Apr 13 08:11:24 rpmi: perl-IO-Compress-2.206-alt1 sisyphus+325819.100.1.1 1690563199 installed <13>Apr 13 08:11:24 rpmi: perl-Net-HTTP-6.23-alt1 sisyphus+323470.100.1.1 1687422469 installed <13>Apr 13 08:11:24 rpmi: perl-HTML-Parser-3.82-alt1 sisyphus+343116.100.1.3 1710883258 installed <13>Apr 13 08:11:24 rpmi: perl-WWW-RobotRules-6.02-alt1 1329756211 installed <13>Apr 13 08:11:24 rpmi: perl-Encode-Locale-1.05-alt1 1444608613 installed <13>Apr 13 08:11:24 rpmi: perl-IO-HTML-1.004-alt1 sisyphus+258983.100.1.1 1601542619 installed <13>Apr 13 08:11:24 rpmi: perl-HTTP-Message-6.45-alt1 sisyphus+330728.100.1.1 1696162276 installed <13>Apr 13 08:11:24 rpmi: perl-HTTP-Negotiate-6.01-alt1 1329760563 installed <13>Apr 13 08:11:24 rpmi: perl-libwww-6.77-alt1 sisyphus+343120.100.1.2 1710884405 installed <13>Apr 13 08:11:24 rpmi: perl-XML-LibXML-2.0210-alt4 sisyphus+342491.100.1.1 1710160239 installed <13>Apr 13 08:11:24 rpmi: perl-XML-SAX-1.02-alt1 sisyphus+232322.100.1.1 1560758406 installed <13>Apr 13 08:11:24 rpmi: perl-XML-Simple-2.25-alt2 sisyphus+257498.100.1.1 1599324034 installed <13>Apr 13 08:11:24 rpmi: icon-naming-utils-0.8.90-alt1 sisyphus+276851.100.1.1 1625243947 installed <13>Apr 13 08:11:24 rpmi: icon-theme-adwaita-46.0-alt1 sisyphus+343025.200.4.2 1710847162 installed <13>Apr 13 08:11:24 rpmi: perl-XML-Parser-2.47-alt1 sisyphus+337612.100.1.1 1704201438 installed <13>Apr 13 08:11:24 rpmi: usbids-20240206-alt1 sisyphus+339943.100.1.1 1707270512 installed <13>Apr 13 08:11:24 rpmi: pciids-20240408-alt1 sisyphus+344669.100.1.1 1712583815 installed <13>Apr 13 08:11:24 rpmi: hwdata-0.374-alt1 sisyphus+329322.100.1.1 1694450297 installed <13>Apr 13 08:11:24 rpmi: gtk+3-themes-incompatible-3.20-alt3 1461944560 installed <13>Apr 13 08:11:24 rpmi: libffi-devel-1:3.4.6-alt1 sisyphus+341904.100.1.1 1709474536 installed <13>Apr 13 08:11:24 rpmi: python3-module-zipp-3.18.1-alt1 sisyphus+342979.100.2.1 1710837966 installed <13>Apr 13 08:11:24 rpmi: python3-module-importlib-metadata-7.1.0-alt1 sisyphus+343253.100.1.1 1711017097 installed <13>Apr 13 08:11:24 rpmi: python3-module-markdown-3.6-alt1 sisyphus+342748.100.1.1 1710451241 installed <13>Apr 13 08:11:24 rpmi: python3-module-polib-1.1.1-alt1 sisyphus+282657.100.1.1 1628954165 installed <13>Apr 13 08:11:24 rpmi: python3-module-click-8.1.7-alt1 sisyphus+327424.100.2.1 1695395098 installed <13>Apr 13 08:11:24 rpmi: python3-module-chameleon.core-4.5.2-alt1 sisyphus+339420.100.1.1 1706650227 installed <13>Apr 13 08:11:24 rpmi: python3-module-lingua-4.15.0-alt3 sisyphus+339340.100.1.1 1706573397 installed <13>Apr 13 08:11:25 rpmi: python3-module-babel-1:2.14.0-alt1.1 sisyphus+342546.1400.3.1 1710867888 installed <13>Apr 13 08:11:25 rpmi: python3-module-markupsafe-1:2.1.5-alt1 sisyphus+339663.100.1.1 1706899589 installed <13>Apr 13 08:11:25 rpmi: python3-module-pycparser-2.21-alt1.1 sisyphus+309935.7300.4.1 1668527005 installed <13>Apr 13 08:11:25 rpmi: python3-module-cffi-1.16.0-alt1 sisyphus+333513.10400.71.1 1704540321 installed <13>Apr 13 08:11:25 rpmi: python3-module-cryptography-42.0.5-alt1 sisyphus+341498.100.1.1 1709027854 installed <13>Apr 13 08:11:25 rpmi: python3-module-beaker-1.12.1-alt1 sisyphus+319143.100.1.1 1682256768 installed <13>Apr 13 08:11:25 rpmi: python3-module-mako-1.3.3-alt1 sisyphus+344943.100.1.1 1712847267 installed <13>Apr 13 08:11:25 rpmi: libpython3-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Apr 13 08:11:25 rpmi: libncurses6-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>Apr 13 08:11:25 rpmi: libtinfo-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>Apr 13 08:11:25 rpmi: libncurses-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>Apr 13 08:11:26 rpmi: python3-dev-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Apr 13 08:11:26 rpmi: python3-module-setuptools-1:69.2.0-alt1 sisyphus+342809.100.1.1 1710522388 installed <13>Apr 13 08:11:26 rpmi: gcc-c++-common-1.4.27-alt1 sisyphus+278099.1300.1.1 1626028636 installed <13>Apr 13 08:11:26 rpmi: libstdc++13-devel-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Apr 13 08:11:27 rpmi: gcc13-c++-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Apr 13 08:11:27 rpmi: python3-module-packaging-24.0-alt1 sisyphus+342487.100.2.1 1710407438 installed <13>Apr 13 08:11:27 rpmi: libdevmapper-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>Apr 13 08:11:27 rpmi: mount-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Apr 13 08:11:27 rpmi: losetup-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Apr 13 08:11:27 rpmi: lsblk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Apr 13 08:11:27 rpmi: dmsetup-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <86>Apr 13 08:11:27 groupadd[92418]: group added to /etc/group: name=tape, GID=999 <86>Apr 13 08:11:27 groupadd[92418]: group added to /etc/gshadow: name=tape <86>Apr 13 08:11:27 groupadd[92418]: new group: name=tape, GID=999 <86>Apr 13 08:11:27 groupadd[92428]: group added to /etc/group: name=dialout, GID=998 <86>Apr 13 08:11:27 groupadd[92428]: group added to /etc/gshadow: name=dialout <86>Apr 13 08:11:27 groupadd[92428]: new group: name=dialout, GID=998 <86>Apr 13 08:11:27 groupadd[92438]: group added to /etc/group: name=input, GID=997 <86>Apr 13 08:11:27 groupadd[92438]: group added to /etc/gshadow: name=input <86>Apr 13 08:11:27 groupadd[92438]: new group: name=input, GID=997 <86>Apr 13 08:11:27 groupadd[92452]: group added to /etc/group: name=video, GID=996 <86>Apr 13 08:11:27 groupadd[92452]: group added to /etc/gshadow: name=video <86>Apr 13 08:11:27 groupadd[92452]: new group: name=video, GID=996 <86>Apr 13 08:11:27 groupadd[92464]: group added to /etc/group: name=render, GID=995 <86>Apr 13 08:11:27 groupadd[92464]: group added to /etc/gshadow: name=render <86>Apr 13 08:11:27 groupadd[92464]: new group: name=render, GID=995 <86>Apr 13 08:11:27 groupadd[92475]: group added to /etc/group: name=sgx, GID=994 <86>Apr 13 08:11:27 groupadd[92475]: group added to /etc/gshadow: name=sgx <86>Apr 13 08:11:27 groupadd[92475]: new group: name=sgx, GID=994 <13>Apr 13 08:11:27 rpmi: udev-1:254.10-alt1 sisyphus+343748.100.3.1 1711611802 installed <13>Apr 13 08:11:28 rpmi: dconf-profile-0.1-alt1 sisyphus+325633.340.3.1 1690415358 installed <13>Apr 13 08:11:28 rpmi: boost-python-headers-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_context1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_fiber1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_stacktrace1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_nowide1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_url1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_test1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_serialization1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_random1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_iostreams1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_json1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_regex1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_graph1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_date_time1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:28 rpmi: libboost_container1.84.0-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:29 rpmi: boost-devel-headers-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802659 installed <13>Apr 13 08:11:29 rpmi: boost-devel-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:29 rpmi: systemd-modules-common-1:254.10-alt1 sisyphus+343748.100.3.1 1711611773 installed <13>Apr 13 08:11:29 rpmi: systemd-sysctl-common-1:254.10-alt1 sisyphus+343748.100.3.1 1711611802 installed <13>Apr 13 08:11:29 rpmi: systemd-tmpfiles-common-1:254.10-alt1 sisyphus+343748.100.3.1 1711611773 installed <13>Apr 13 08:11:29 rpmi: systemd-utils-filetriggers-1:254.10-alt1 sisyphus+343748.100.3.1 1711611773 installed <13>Apr 13 08:11:29 rpmi: libfdisk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Apr 13 08:11:29 rpmi: systemd-utils-standalone-1:254.10-alt1 sisyphus+343748.100.3.1 1711611802 installed <13>Apr 13 08:11:29 rpmi: libgc-8.2.6-alt1 sisyphus+340965.100.1.1 1708275751 installed <13>Apr 13 08:11:29 rpmi: libmaa-1.4.7-alt6 sisyphus+340364.100.1.1 1707550842 installed <13>Apr 13 08:11:29 rpmi: dict-1:1.13.1-alt2 sisyphus+340952.100.1.1 1708270449 installed <13>Apr 13 08:11:29 rpmi: w3m-0.5.3-alt4.git20200502 sisyphus+328124.5000.1.1 1693253320 installed <13>Apr 13 08:11:29 rpmi: sgml-common-0.6.3-alt15 sisyphus+276099.100.1.1 1624817971 installed <13>Apr 13 08:11:29 rpmi: docbook-dtds-4.5-alt1 sisyphus+276837.100.1.1 1625242123 installed <13>Apr 13 08:11:30 rpmi: docbook-style-xsl-1.79.1-alt4 sisyphus+232871.100.1.1 1561238010 installed <13>Apr 13 08:11:30 rpmi: libxslt-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Apr 13 08:11:30 rpmi: xsltproc-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Apr 13 08:11:30 rpmi: asciidoc-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>Apr 13 08:11:30 rpmi: libImageMagick7-common-7.1.1.27-alt1 sisyphus+339623.200.2.1 1707114139 installed <13>Apr 13 08:11:30 rpmi: libwmflite-0.2.8.4-alt13 sisyphus+275127.100.1.1 1624406848 installed <13>Apr 13 08:11:30 rpmi: liblqr-0.4.2-alt1 sisyphus+276247.100.1.2 1624927462 installed <13>Apr 13 08:11:30 rpmi: highway-libs-1.1.0-alt1 sisyphus+341019.100.4.1 1708516183 installed <13>Apr 13 08:11:30 rpmi: libjxl0.8-0.8.2-alt2 sisyphus+341019.1700.6.1 1708602427 installed <13>Apr 13 08:11:30 rpmi: libjbig2.1-2.1-alt2 sisyphus+326386.40.6.1 1691148232 installed <13>Apr 13 08:11:30 rpmi: djvu-common-3.5.28-alt2 sisyphus+297715.100.1.1 1648887081 installed <13>Apr 13 08:11:30 rpmi: libdjvu-3.5.28-alt2 sisyphus+297715.100.1.1 1648887083 installed <13>Apr 13 08:11:30 rpmi: libgts-0.7.6-alt2.drc20130205.1 sisyphus+275722.100.1.1 1624749871 installed <13>Apr 13 08:11:30 rpmi: libpaper2-2:2.1.3-alt1 sisyphus+340967.100.1.1 1708276734 installed <13>Apr 13 08:11:30 rpmi: liblmdb-0.9.32-alt1 sisyphus+342426.100.1.1 1710124284 installed <13>Apr 13 08:11:30 rpmi: libkeyutils-1.6.3-alt1 sisyphus+266061.100.1.1 1612919567 installed <86>Apr 13 08:11:30 groupadd[94784]: group added to /etc/group: name=_keytab, GID=993 <86>Apr 13 08:11:30 groupadd[94784]: group added to /etc/gshadow: name=_keytab <86>Apr 13 08:11:30 groupadd[94784]: new group: name=_keytab, GID=993 <13>Apr 13 08:11:30 rpmi: libkrb5-1.21.2-alt2 sisyphus+338902.100.2.1 1706700985 installed <86>Apr 13 08:11:30 groupadd[94814]: group added to /etc/group: name=sasl, GID=992 <86>Apr 13 08:11:30 groupadd[94814]: group added to /etc/gshadow: name=sasl <86>Apr 13 08:11:30 groupadd[94814]: new group: name=sasl, GID=992 <13>Apr 13 08:11:30 rpmi: libsasl2-3-2.1.28-alt2 sisyphus+343335.100.1.1 1711112524 installed <13>Apr 13 08:11:30 rpmi: libldap2-2.6.7-alt1 sisyphus+343335.200.1.1 1711113906 installed <13>Apr 13 08:11:30 rpmi: libkrb5-ldap-1.21.2-alt2 sisyphus+338902.100.2.1 1706700985 installed <13>Apr 13 08:11:30 rpmi: libkrb5-devel-1.21.2-alt2 sisyphus+338902.100.2.1 1706700985 installed <13>Apr 13 08:11:30 rpmi: libtirpc-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Apr 13 08:11:30 rpmi: liblz4-1:1.9.4-alt1 sisyphus+309416.100.1.1 1667413000 installed <13>Apr 13 08:11:30 rpmi: libsystemd-1:254.10-alt1 sisyphus+343748.100.3.1 1711611802 installed <13>Apr 13 08:11:30 rpmi: libdbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>Apr 13 08:11:30 rpmi: libavahi-0.8-alt4 sisyphus+344258.100.1.1 1712133862 installed <13>Apr 13 08:11:30 rpmi: libcups-2.4.7-alt2 sisyphus+333092.100.1.1 1698654164 installed <13>Apr 13 08:11:30 rpmi: dbus-tools-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <86>Apr 13 08:11:30 groupadd[94855]: group added to /etc/group: name=messagebus, GID=991 <86>Apr 13 08:11:30 groupadd[94855]: new group: name=messagebus, GID=991 <86>Apr 13 08:11:30 useradd[94864]: new user: name=messagebus, UID=999, GID=991, home=/run/dbus, shell=/dev/null, from=none <13>Apr 13 08:11:30 rpmi: dbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>Apr 13 08:11:30 rpmi: icon-theme-hicolor-0.17-alt2 sisyphus+248343.100.1.1 1584979043 installed <13>Apr 13 08:11:30 rpmi: libgtk+2-locales-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Apr 13 08:11:30 rpmi: libnuma-2.0.14-alt2 sisyphus+278485.100.1.1 1626104243 installed <13>Apr 13 08:11:30 rpmi: libx265-199-3.5-alt1.1 sisyphus+277560.100.1.1 1625696944 installed <13>Apr 13 08:11:30 rpmi: libdeflate-1.20-alt1 sisyphus+343488.100.1.1 1711323986 installed <13>Apr 13 08:11:30 rpmi: libtiff5-4.4.0-alt4 sisyphus+322581.100.1.2 1686180093 installed <13>Apr 13 08:11:31 rpmi: libgs-10.01.1-alt2 sisyphus+337968.300.3.1 1705654987 installed <13>Apr 13 08:11:31 rpmi: libgdk-pixbuf-locales-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Apr 13 08:11:31 rpmi: libde265-1.0.15-alt1 sisyphus+337190.100.1.1 1703502097 installed <13>Apr 13 08:11:32 rpmi: libaom3-3.5.0-alt2 sisyphus+335780.100.1.1 1701761523 installed <13>Apr 13 08:11:32 rpmi: libdatrie-0.2.13-alt1_7 sisyphus+328221.100.1.1 1693336967 installed <13>Apr 13 08:11:32 rpmi: libthai-0.1.29-alt1_6 sisyphus+328230.100.1.2 1693348044 installed <13>Apr 13 08:11:32 rpmi: desktop-file-utils-0.26-alt6 sisyphus+331944.100.1.3 1697550035 installed <13>Apr 13 08:11:32 rpmi: shared-mime-info-2.4-alt1 sisyphus+334259.100.1.1 1699787317 installed <13>Apr 13 08:11:32 rpmi: gsettings-desktop-schemas-data-46.0-alt1 sisyphus+343025.100.4.2 1710847127 installed <13>Apr 13 08:11:32 rpmi: libgio-2.80.0-alt2.1 sisyphus+343856.100.1.1 1711642825 installed <13>Apr 13 08:11:32 rpmi: gsettings-desktop-schemas-46.0-alt1 sisyphus+343025.100.4.2 1710847126 installed <13>Apr 13 08:11:32 rpmi: glib2-devel-2.80.0-alt2.1 sisyphus+343856.100.1.1 1711642825 installed <13>Apr 13 08:11:32 rpmi: libgdk-pixbuf-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Apr 13 08:11:32 rpmi: libgio-devel-2.80.0-alt2.1 sisyphus+343856.100.1.1 1711642825 installed <13>Apr 13 08:11:32 rpmi: libgdk-pixbuf-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Apr 13 08:11:32 rpmi: libatk-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Apr 13 08:11:32 rpmi: libheif-1.17.6-alt1 sisyphus+337190.200.1.1 1703502143 installed <13>Apr 13 08:11:32 rpmi: gtk4-update-icon-cache-4.14.2-alt1 sisyphus+344316.100.1.1 1712176520 installed <13>Apr 13 08:11:32 rpmi: libgdk-pixbuf-gir-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Apr 13 08:11:32 rpmi: libgdk-pixbuf-gir-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Apr 13 08:11:32 rpmi: libatk-gir-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Apr 13 08:11:32 rpmi: libgirepository1.0-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Apr 13 08:11:32 rpmi: gobject-introspection-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Apr 13 08:11:32 rpmi: libdconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Apr 13 08:11:32 rpmi: dconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Apr 13 08:11:32 rpmi: libgtk+3-schemas-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365587 installed <13>Apr 13 08:11:32 rpmi: libjson-glib-1.8.0-alt1 sisyphus+325066.600.6.2 1695204016 installed <13>Apr 13 08:11:32 rpmi: libgusb-0.4.8-alt1 sisyphus+333854.100.1.1 1699389324 installed <13>Apr 13 08:11:32 rpmi: libcolord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039037 installed <13>Apr 13 08:11:32 rpmi: libpolkit-124-alt1 sisyphus+340067.100.1.1 1707374992 installed <86>Apr 13 08:11:32 groupadd[95957]: group added to /etc/group: name=colord, GID=990 <86>Apr 13 08:11:32 groupadd[95957]: group added to /etc/gshadow: name=colord <86>Apr 13 08:11:32 groupadd[95957]: new group: name=colord, GID=990 <86>Apr 13 08:11:32 useradd[95963]: new user: name=colord, UID=998, GID=990, home=/var/colord, shell=/dev/null, from=none <13>Apr 13 08:11:32 rpmi: colord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039037 installed <13>Apr 13 08:11:32 rpmi: libpixman-3:0.43.4-alt2 sisyphus+344164.100.1.1 1711987947 installed <13>Apr 13 08:11:32 rpmi: libX11-locales-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440719 installed <13>Apr 13 08:11:32 rpmi: libXdmcp-1.1.5-alt1 sisyphus+343583.700.1.1 1711441073 installed <13>Apr 13 08:11:32 rpmi: libxcb-1.16.1-alt1 sisyphus+343583.500.1.1 1711440989 installed <13>Apr 13 08:11:32 rpmi: libX11-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440722 installed <13>Apr 13 08:11:32 rpmi: libXext-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441114 installed <13>Apr 13 08:11:32 rpmi: libXrender-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Apr 13 08:11:32 rpmi: libcairo-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Apr 13 08:11:32 rpmi: libcairo-gobject-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Apr 13 08:11:32 rpmi: libXt-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Apr 13 08:11:32 rpmi: libXfixes-6.0.1-alt1 sisyphus+331490.300.1.1 1697023235 installed <13>Apr 13 08:11:32 rpmi: libXft-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Apr 13 08:11:32 rpmi: libpango-1.52.2-alt1 sisyphus+344075.100.1.1 1711911780 installed <13>Apr 13 08:11:32 rpmi: libXi-1.8-alt1 sisyphus+285490.200.1.1 1632124180 installed <13>Apr 13 08:11:32 rpmi: libXinerama-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Apr 13 08:11:32 rpmi: libat-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Apr 13 08:11:32 rpmi: librsvg-1:2.58.0-alt1 sisyphus+342941.200.1.1 1710698850 installed <13>Apr 13 08:11:32 rpmi: libpango-gir-1.52.2-alt1 sisyphus+344075.100.1.1 1711911780 installed <13>Apr 13 08:11:32 rpmi: libtk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Apr 13 08:11:32 rpmi: tk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Apr 13 08:11:32 rpmi: libXcursor-1.2.2-alt1 sisyphus+343583.600.1.1 1711441036 installed <13>Apr 13 08:11:32 rpmi: libXpm-3.5.17-alt1 sisyphus+330921.100.1.1 1696400258 installed <13>Apr 13 08:11:32 rpmi: libXmu-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441186 installed <13>Apr 13 08:11:32 rpmi: libXrandr-1.5.4-alt1 sisyphus+330992.100.1.1 1696485401 installed <13>Apr 13 08:11:32 rpmi: libXcomposite-0.4.6-alt1 sisyphus+311188.200.1.1 1670233684 installed <13>Apr 13 08:11:32 rpmi: libXdamage-1.1.6-alt1 sisyphus+311188.300.1.1 1670233713 installed <13>Apr 13 08:11:33 rpmi: libgtk+2-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Apr 13 08:11:34 rpmi: libxcb-devel-1.16.1-alt1 sisyphus+343583.500.1.1 1711440989 installed <13>Apr 13 08:11:34 rpmi: libX11-devel-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440722 installed <13>Apr 13 08:11:34 rpmi: libXrender-devel-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Apr 13 08:11:34 rpmi: libXt-devel-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Apr 13 08:11:34 rpmi: libXmu-devel-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441186 installed <13>Apr 13 08:11:34 rpmi: libXext-devel-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441114 installed <13>Apr 13 08:11:34 rpmi: libXaw-1.0.16-alt1 sisyphus+343583.400.1.1 1711440837 installed <13>Apr 13 08:11:34 rpmi: libgd3-2.3.3-alt2 sisyphus+335387.100.1.1 1701278647 installed <13>Apr 13 08:11:34 rpmi: tcl-tix-8.4.3-alt4 sisyphus+277292.300.2.1 1625442551 installed <13>Apr 13 08:11:34 rpmi: at-spi2-atk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Apr 13 08:11:34 rpmi: liblasi-1.1.3-alt3 sisyphus+286812.100.2.1 1633968134 installed <13>Apr 13 08:11:34 rpmi: libgraphviz-10.0.1-alt1 sisyphus+342592.40.4.1 1710427363 installed <13>Apr 13 08:11:34 rpmi: libharfbuzz-cairo-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>Apr 13 08:11:34 rpmi: fontconfig-devel-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Apr 13 08:11:34 rpmi: libfreetype-devel-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Apr 13 08:11:34 rpmi: libcairo-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Apr 13 08:11:34 rpmi: libharfbuzz-devel-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>Apr 13 08:11:34 rpmi: libharfbuzz-gir-devel-8.4.0-alt1 sisyphus+344161.100.1.1 1711987962 installed <13>Apr 13 08:11:34 rpmi: libpango-gir-devel-1.52.2-alt1 sisyphus+344075.100.1.1 1711911777 installed <13>Apr 13 08:11:34 rpmi: libcairo-gobject-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Apr 13 08:11:34 rpmi: libXft-devel-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Apr 13 08:11:34 rpmi: libpango-devel-1.52.2-alt1 sisyphus+344075.100.1.1 1711911780 installed <13>Apr 13 08:11:34 rpmi: libXtst-1.2.4-alt1 sisyphus+308663.1300.1.1 1666168504 installed <13>Apr 13 08:11:34 rpmi: libXxf86vm-1.1.5-alt1 sisyphus+308663.1400.1.1 1666168534 installed <13>Apr 13 08:11:34 rpmi: libGLX-mesa-4:24.0.5-alt1 sisyphus+344984.100.1.1 1712917237 installed <13>Apr 13 08:11:34 rpmi: libGLX-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Apr 13 08:11:34 rpmi: libGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Apr 13 08:11:34 rpmi: libGLU-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Apr 13 08:11:34 rpmi: dbus-tools-gui-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>Apr 13 08:11:34 rpmi: xprop-1.2.5-alt1 sisyphus+279025.100.1.1 1626354193 installed <13>Apr 13 08:11:34 rpmi: at-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Apr 13 08:11:35 rpmi: libgtk+3-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365614 installed <13>Apr 13 08:11:35 rpmi: libgtk+3-gir-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365614 installed <13>Apr 13 08:11:35 rpmi: libgtk+3-devel-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365614 installed <13>Apr 13 08:11:35 rpmi: libgbm-4:24.0.5-alt1 sisyphus+344984.100.1.1 1712917237 installed <13>Apr 13 08:11:35 rpmi: libEGL-mesa-4:24.0.5-alt1 sisyphus+344984.100.1.1 1712917237 installed <13>Apr 13 08:11:35 rpmi: libEGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Apr 13 08:11:35 rpmi: libglvnd-devel-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Apr 13 08:11:35 rpmi: libiex30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Apr 13 08:11:35 rpmi: libilmthread30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Apr 13 08:11:35 rpmi: libimath29-3.1.6-alt4 sisyphus+340273.100.1.2 1707542785 installed <13>Apr 13 08:11:35 rpmi: libopenexr30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Apr 13 08:11:35 rpmi: libImageMagick7.10-7.1.1.27-alt1 sisyphus+339623.200.2.1 1707114139 installed <13>Apr 13 08:11:35 rpmi: ImageMagick-tools-7.1.1.27-alt1 sisyphus+339623.200.2.1 1707114139 installed <13>Apr 13 08:11:35 rpmi: libGL-devel-4:24.0.5-alt1 sisyphus+344984.100.1.1 1712917237 installed <13>Apr 13 08:11:35 rpmi: libGLU-devel-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Apr 13 08:11:35 rpmi: libepoxy-devel-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Apr 13 08:11:35 rpmi: libgtk+3-gir-devel-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365587 installed <13>Apr 13 08:11:35 rpmi: python3-module-pygobject3-3.48.2-alt1 sisyphus+344585.100.1.1 1712400549 installed <13>Apr 13 08:11:35 rpmi: libgtk+2-devel-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Apr 13 08:11:36 rpmi: python3-modules-tkinter-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Apr 13 08:11:36 rpmi: libXaw-devel-1.0.16-alt1 sisyphus+343583.400.1.1 1711440837 installed <13>Apr 13 08:11:36 rpmi: libXinerama-devel-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Apr 13 08:11:36 rpmi: tk-devel-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Apr 13 08:11:36 rpmi: bwidget-1.9.1-alt1 1314273552 installed <13>Apr 13 08:11:36 rpmi: tcl-img-1.4.14-alt1 sisyphus+316986.300.2.1 1679243176 installed <13>Apr 13 08:11:36 rpmi: libtirpc-devel-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Apr 13 08:11:36 rpmi: asciidoc-a2x-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>Apr 13 08:11:36 rpmi: boost-lockfree-devel-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802659 installed <13>Apr 13 08:11:36 rpmi: boost-python3-devel-1:1.84.0-alt3 sisyphus+340550.100.1.1 1707802751 installed <13>Apr 13 08:11:36 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Apr 13 08:11:36 rpmi: intltool-0.51.0-alt2 1513698802 installed <13>Apr 13 08:11:36 rpmi: man-db-2.12.0-alt1 sisyphus+336930.2100.1.1 1703107336 installed <13>Apr 13 08:11:36 rpmi: libmodbus-devel-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Apr 13 08:11:36 rpmi: libusb-devel-1.0.26-alt3 sisyphus+340691.100.3.1 1708466436 installed <13>Apr 13 08:11:36 rpmi: tclx-1:8.4.4-alt1 sisyphus+251935.100.1.1 1589842635 installed <13>Apr 13 08:11:36 rpmi: xorg-cf-files-1.0.7-alt3 sisyphus+299066.100.1.1 1650986802 installed <13>Apr 13 08:11:36 rpmi: python3-module-yapps2-2.2.0-alt2 sisyphus+281199.100.1.1 1627462968 installed <13>Apr 13 08:11:36 rpmi: libudev-devel-1:254.10-alt1 sisyphus+343748.100.3.1 1711611802 installed <13>Apr 13 08:11:36 rpmi: libreadline-devel-8.2.10-alt1 sisyphus+338911.100.4.1 1706717069 installed <13>Apr 13 08:11:36 rpmi: dos2unix-7.5.2-alt1 sisyphus+339342.100.1.1 1706585516 installed Building target platforms: i586 Building for target i586 Wrote: /usr/src/in/nosrpm/linuxcnc-2.9.2-alt3.20240203.nosrc.rpm (w1.gzdio) Installing linuxcnc-2.9.2-alt3.20240203.src.rpm Building target platforms: i586 Building for target i586 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.94926 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf linuxcnc-2.9.2 + echo 'Source #0 (linuxcnc-2.9.2.tar):' Source #0 (linuxcnc-2.9.2.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/linuxcnc-2.9.2.tar + cd linuxcnc-2.9.2 + /bin/chmod -c -Rf u+rwX,go-w . + echo 'Patch #0 (linuxcnc-2.9.2-alt3.20240203.patch):' Patch #0 (linuxcnc-2.9.2-alt3.20240203.patch): + /usr/bin/patch -p1 patching file .gear/rules patching file .gear/tags/list patching file .gear/upstream/remotes patching file lib/python/qtvcp/lib/virtual_keyboard.py patching file linuxcnc-documentation.desktop patching file linuxcnc.spec patching file scripts/linuxcnc_info.in patching file share/qtvcp/panels/test_panel/test_panel_handler.py patching file src/Makefile patching file src/Makefile.inc.in patching file src/configure.ac patching file src/m4/ax_boost_base.m4 patching file src/m4/ax_python.m4 + sed -i 's|lib/tcltk/linuxcnc|lib/tcl/linuxcnc|' lib/python/rs274/options.py + sed -i 's|INCLUDES := .|INCLUDES := . /usr/include/tirpc|' src/Makefile + sed -i 's|LDFLAGS := |LDFLAGS := -ltirpc |' src/Makefile + sed 's/ -o root//g' -i src/Makefile + find . -name '*.py' -exec dos2unix '{}' ';' dos2unix: converting file ./tests/trajectory-planner/circular-arcs/test-reverse.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/run_all_tests.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/machine_setup.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/linuxcnc_control.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/m61/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-with-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-no-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/tlo/test-ui.py to Unix format... dos2unix: converting file ./tests/statbuffer-g5x-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/startup-state/test-ui.py to Unix format... dos2unix: converting file ./tests/single-step/test-ui.py to Unix format... dos2unix: converting file ./tests/rs274ngc-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/subs.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/remap.py to Unix format... dos2unix: converting file ./tests/remap/spindle/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/spindle/remap.py to Unix format... dos2unix: converting file ./tests/remap/sequencing/permute.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/remap.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/remap.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/subs.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/namedparams.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/subs.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/oword.py to Unix format... dos2unix: converting file ./tests/remap/introspect/subs.py to Unix format... dos2unix: converting file ./tests/remap/introspect/oword.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/remap.py to Unix format... dos2unix: converting file ./tests/mqtt/display.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-joint/test-ui.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-axis/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/startup-gcode-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/mountaindew/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/basic/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/toplevel.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/remap.py to Unix format... dos2unix: converting file ./tests/mdi-queue-length/test-ui.py to Unix format... dos2unix: converting file ./tests/lathe/test-ui.py to Unix format... dos2unix: converting file ./tests/io-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/subs.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/oword.py to Unix format... dos2unix: converting file ./tests/interp/subroutine-return/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/python/error/canon.py to Unix format... dos2unix: converting file ./tests/interp/python-self/subs.py to Unix format... dos2unix: converting file ./tests/interp/python-self/oword.py to Unix format... dos2unix: converting file ./tests/interp/pymove/subs.py to Unix format... dos2unix: converting file ./tests/interp/pymove/oword.py to Unix format... dos2unix: converting file ./tests/interp/oword-mdi-sub-update/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/mdi-oword-m66/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/m98m99/12-M99-endless-main-program/test-ui.py to Unix format... dos2unix: converting file ./tests/hm2-idrom/check-dmesg.py to Unix format... dos2unix: converting file ./tests/hard-limits/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/mdi/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/jogging/test-ui.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_writer.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_test.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_reader.py to Unix format... dos2unix: converting file ./tests/halmodule.0/test.py to Unix format... dos2unix: converting file ./tests/hal-link-unlink/hallink.py to Unix format... dos2unix: converting file ./tests/ccomp/early-exit/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/stop-button-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/on_abort_command-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/g64/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/feed-rate/test-ui.py to Unix format... dos2unix: converting file ./src/po/fixpaths.py to Unix format... dos2unix: converting file ./src/modsilent.py to Unix format... dos2unix: converting file ./src/hal/utils/elbpcom.py to Unix format... dos2unix: converting file ./src/hal/user_comps/z_level_compensation.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzbc-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzac-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzab-tdr-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/scaragui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/rotarydelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/pumagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/puma560gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/millturngui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/melfagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/max5gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/maho600gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/lineardelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hexagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hbmgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/5axisgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/sim-torch.py to Unix format... dos2unix: converting file ./src/hal/user_comps/scorbot-er-3.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pyvcp.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pmx485.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mqtt-publisher.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mitsub_vfd.py to Unix format... dos2unix: converting file ./src/hal/user_comps/hal_input.py to Unix format... dos2unix: converting file ./src/hal/user_comps/gladevcp.py to Unix format... dos2unix: converting file ./src/hal/drivers/rbf2h.py to Unix format... dos2unix: converting file ./src/hal/drivers/mesa-hostmot2/modbus/modcompile.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/touchy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/listing.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/hal_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/filechooser.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/stepconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/import_mach.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtvcp/qtvcp.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac_gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-plasmac2qt.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-materials.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-cfg2prefs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/pmx485-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/pyui.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_validate.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_handler.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/master.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/commands.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/tests.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/private_data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pncconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/mdro/mdro.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/keybindings.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/gscreen.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/qt5_graphics.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/gremlin.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/player.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/notification.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/icon_theme_helper.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/gmoccapy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/getiniinfo.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/dialogs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/tracking-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/teach-in.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/linuxcnctop.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/lintini.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/image-to-gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/haltest.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/debuglevel.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis-remote.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/makeicon.py to Unix format... dos2unix: converting file ./src/emc/ini/update_ini.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/x1mill/x1mill_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/woodpecker/woodpecker_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qttouchy/qttouchy_handler.py to Unix format... dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py. dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py. dos2unix: converting file ./share/qtvcp/screens/qtplasmac/qtplasmac_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtplasmac/languages/qtplasmac.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtlathe/qtlathe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon/qtdragon_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtaxis/qtaxis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc/qt_cnc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/blender/blender_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_scara/vismach_scara_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/versaprobe/versaprobe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/tool_dialog/tool_dialog_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_probe/test_probe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_panel/test_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_led/test_led_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_dial/test_dial_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_button/test_button_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/spindle_belts/spindle_belts_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/sim_panel/sim_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/copy/copy_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/cam_align/cam_align_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/spartan/spartan_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/silverdragon/silverdragon_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/industrial/industrial_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis/gaxis_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/9_axis/9_axis_handler.py to Unix format... dos2unix: converting file ./scripts/torture.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/stdglue.py to Unix format... dos2unix: Skipping symbolic link ./nc_files/remap_lib/python-stdglue/python/stdglue.py. dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/toplevel.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/remap.py to Unix format... dos2unix: converting file ./nc_files/involute.py to Unix format... dos2unix: converting file ./nc_files/holecircle.py to Unix format... dos2unix: converting file ./nc_files/flowsnake.py to Unix format... dos2unix: converting file ./nc_files/filtertest.py to Unix format... dos2unix: converting file ./nc_files/filtertest-gui.py to Unix format... dos2unix: converting file ./lib/python/vismach.py to Unix format... dos2unix: converting file ./lib/python/vcpparse.py to Unix format... dos2unix: converting file ./lib/python/tooldb.py to Unix format... dos2unix: converting file ./lib/python/rs274/options.py to Unix format... dos2unix: converting file ./lib/python/rs274/interpret.py to Unix format... dos2unix: converting file ./lib/python/rs274/glcanon.py to Unix format... dos2unix: converting file ./lib/python/rs274/author.py to Unix format... dos2unix: converting file ./lib/python/rs274/__init__.py to Unix format... dos2unix: converting file ./lib/python/rs274/OpenGLTk.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_baseclass.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/web_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/virtualkeyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/versa_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/touchEntry.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tool_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tab_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/system_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/stylesheeteditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_stacked.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_slider.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_led.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/simple_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/screen_options.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/runFromLine_dialog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_progress.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_gauge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/richtext_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/radio_axis_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/qtvcp_icons.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_subprog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_routines.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/overlay_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/origin_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/offset_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/nurbs_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_touchy.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_history.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/led_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/joypad.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/jog_increments.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/image_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_selectionbox.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_output.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_input.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/geditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_graphics.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/file_manager.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/fake_status.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/entry_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialog_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialogMixin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/detach_tabs.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/container_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/camview_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/calculator.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/basic_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/axis_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/adjustment_bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button_round.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qtvcp_handler.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_tstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_pstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makepins.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makegui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_istat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_action.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/widgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/web_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/virtualkeyboard_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/versa_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/toolbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/tab_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_slider_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/simplewidgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/screenoptions_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_progress_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_gauge_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/qtvcp_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/overlay_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/nurbs_editor_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/joypad_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/jogincrements_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/hal_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/graphics_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/dialog_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/detach_tabs_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/container_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/camview_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/basic_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/actionbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/logger.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/virtual_keyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/writer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/wordcount.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/table.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/find.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/datetime.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/touchoff_subprogram.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/toolbar_actions.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/sys_notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/ripper/gcode_ripper.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/updater.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/tooltips.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/set_offsets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conversational.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_triangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_star.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_slot.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_settings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_sector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_polygon.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_gusset.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_bolt.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_block.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/scara.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/qt_vismach.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/primitives.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/millturn.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/mill_xyz.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_pdf/PDFViewer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/preferences.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/message.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/mdi_text.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/keybindings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcodes.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/facing.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/colored_formatter.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/aux_program_loader.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/auto_height/auto_height.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/audio_player.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/core.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/pyvcp_widgets.py to Unix format... dos2unix: converting file ./lib/python/pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/pyhal.py to Unix format... dos2unix: converting file ./lib/python/propertywindow.py to Unix format... dos2unix: converting file ./lib/python/popupkeyboard.py to Unix format... dos2unix: converting file ./lib/python/plasmac/triangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/star.py to Unix format... dos2unix: converting file ./lib/python/plasmac/slot.py to Unix format... dos2unix: converting file ./lib/python/plasmac/sector.py to Unix format... dos2unix: converting file ./lib/python/plasmac/run_from_line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/rectangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/polygon.py to Unix format... dos2unix: converting file ./lib/python/plasmac/line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/gusset.py to Unix format... dos2unix: converting file ./lib/python/plasmac/ellipse.py to Unix format... dos2unix: converting file ./lib/python/plasmac/circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/bolt_circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/block.py to Unix format... dos2unix: converting file ./lib/python/multifilebuilder.py to Unix format... dos2unix: converting file ./lib/python/linuxcnc_util.py to Unix format... dos2unix: converting file ./lib/python/linux_event.py to Unix format... dos2unix: converting file ./lib/python/hershey.py to Unix format... dos2unix: converting file ./lib/python/hal_glib.py to Unix format... dos2unix: converting file ./lib/python/hal.py to Unix format... dos2unix: converting file ./lib/python/gremlin_view.py to Unix format... dos2unix: converting file ./lib/python/glnav.py to Unix format... dos2unix: converting file ./lib/python/gladevcp_makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/xembed.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/tooledit_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/status_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/state_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/speedcontrol.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/persistence.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/overridewidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetpage_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/led.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/jogwheel.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/iconview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_widgets.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_sourceview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pythonplugin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_meter.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_mdihistory.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_lightbutton.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin_plus.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_graph.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_filechooser.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_dial.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_bar.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_actions.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gtk_action.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gladebuilder.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/drowidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/core.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/combi_dro.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/calculatorwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/bwidget.py to Unix format... dos2unix: converting file ./lib/python/bitfile.py to Unix format... dos2unix: converting file ./docs/src/mkpre.py to Unix format... dos2unix: converting file ./docs/src/links_db_gen.py to Unix format... dos2unix: converting file ./docs/src/links.py to Unix format... dos2unix: converting file ./docs/src/gui/panelui_handler.py to Unix format... dos2unix: converting file ./docs/src/gen_complist.py to Unix format... dos2unix: converting file ./docs/src/checklinks.py to Unix format... dos2unix: converting file ./debian/tests/linuxcnc-test-ui.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/zlevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/woodpecker_/woodpecker_handler.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/numstr.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/compensate.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/touchy/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/qtplasmac/custom_filter.py to Unix format... dos2unix: converting file ./configs/sim/hitcounter.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/signals.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/plasma.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/lathe_configs/lathehandler.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/blockdelete.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/util.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/panelui-demo/panelui_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/plugins.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/embedding.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/fullscreen.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/axis_resize.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/remap.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/axis/gladevcp/test_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/probe.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/meter_scale.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_ran.py. dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_nonran.py. dos2unix: converting file ./configs/sim/axis/db_demo/db.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/functionhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler_persistent.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/simple-callback/simplecallback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/complex/complex.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/colored-label/coloredlabel.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/class-callback/class_callback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/spinbutton.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/sourceview.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/radio.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox_manual_list.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/animated-backdrop/cairodraw.py to Unix format... + sed -i 's/GROUP="plugdev"/GROUP="uucp"/g' debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.6016 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd linuxcnc-2.9.2 + pushd src ~/RPM/BUILD/linuxcnc-2.9.2/src ~/RPM/BUILD/linuxcnc-2.9.2 + ./autogen.sh + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CFLAGS + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CXXFLAGS + FFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FFLAGS + FCFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FCFLAGS + '[' -n '' ']' ++ printf %s '-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' ++ sed -r 's/(^|[[:space:]]+)-[^m][^[:space:]]*//g' + ASFLAGS=' -march=i586 -mtune=generic' + export ASFLAGS + export lt_cv_deplibs_check_method=pass_all + lt_cv_deplibs_check_method=pass_all + readlink -e -- ./configure + xargs -ri dirname -- '{}' + xargs -ri find '{}' -type f '(' -name config.sub -or -name config.guess ')' -printf '%h/\n' + sort -u + xargs -rn1 install -pm755 -- /usr/share/gnu-config/config.sub /usr/share/gnu-config/config.guess + configure_runstatedir_flags= + grep -qF runstatedir=DIR ./configure + configure_runstatedir_flags=--runstatedir=/var/run + ./configure --build=i586-alt-linux --host=i586-alt-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var/lib --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --disable-silent-rules --runstatedir=/var/run --without-included-gettext --enable-non-distributable=yes --with-realtime=uspace configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext checking for i586-alt-linux-c++... no checking for i586-alt-linux-clang++... no checking for c++... c++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking for a BSD-compatible install... /bin/install -c checking whether c++ supports C++17 features with -std=gnu++17... yes checking build toplevel... /usr/src/RPM/BUILD/linuxcnc-2.9.2 checking installation prefix... /usr checking for grep... /bin/grep checking for egrep... /usr/bin/egrep checking for pkg-config... /usr/bin/pkg-config checking for i586-alt-linux-gcc... i586-alt-linux-gcc checking whether the compiler supports GNU C... yes checking whether i586-alt-linux-gcc accepts -g... yes checking for i586-alt-linux-gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for rpc/rpc.h... no checking for get_myaddress in -ltirpc... yes checking for rpc/rpc.h... yes checking for rtai-config... none checking for xeno-config... none checking for realtime API(s) to use... uspace checking whether to enable userspace PCI access... yes checking for libudev... yes - version 254 checking for cc version... not specified checking for i586-alt-linux-gcc... (cached) i586-alt-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i586-alt-linux-gcc accepts -g... (cached) yes checking for i586-alt-linux-gcc option to enable C11 features... (cached) none needed checking how to run the C preprocessor... i586-alt-linux-gcc -E checking for usability of linux/hidraw.h... yes checking for usability of rpc/rpc.h... yes checking for libmodbus3... yes - version 3.1.10 checking for libusb-1.0... yes checking for libgpiod... checking for main in -lgpiod... no configure: WARNING: Could not find libgpiod, not building hal_gpio checking for module installation directory... /usr/lib/linuxcnc/modules checking for glib... yes - 2.80.0 checking for GTK 3.22.4 or above... yes - 3.24.41 checking for GTK 2.4.0 or above... yes - 2.24.33 checking for libgnomeprintui-2.2... no -- printing from classicladder will not be possible checking whether make sets $(MAKE)... yes checking for i586-alt-linux-ranlib... no checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for install... /bin/install -c checking for sed... /bin/sed checking for ps... /bin/ps checking for kill... /bin/kill checking for whoami... /usr/bin/whoami checking for awk... /bin/awk checking for pidof... /bin/pidof checking for ipcs... /usr/bin/ipcs checking for fuser... /usr/bin/fuser checking for yapps... no checking for yapps2... /usr/bin/yapps2 checking for mandb... /usr/bin/mandb checking for intltool-extract... /usr/bin/intltool-extract checking for yapps... (cached) /usr/bin/yapps2 checking build system type... i586-alt-linux-gnu checking host system type... i586-alt-linux-gnu checking for boostlib >= (102000)... yes checking for python build information... checking for python3.12... python3.12 checking for main in -lpython3.12... yes results of the Python check: Binary: python3.12 Library: python3.12 Include Dir: /usr/include/python3.12 checking for python3.12... /usr/bin/python3.12 checking for python... (cached) /usr/bin/python3.12 checking for a version of Python >= '2.1.0'... yes checking for the sysconfig Python package... yes checking for Python include path... -I/usr/include/python3.12 checking for Python library path... -L/usr/lib -lpython3.12 checking for Python site-packages path... /usr/lib/python3/site-packages checking for Python platform specific site-packages path... checking python extra libraries... -ldl -lm checking python extra linking flags... -Xlinker -export-dynamic checking consistency of all components of python development environment... yes checking whether the Boost::Python library is available... yes checking whether boost_python is the correct library... no checking whether boost_python312-mt is the correct library... yes checking whether to build documentation... no checking for sys/io.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for semtimedop... yes checking for optreset... no checking for library containing dlopen... none required checking for library containing clock_nanosleep... none required checking for tcl... find: '/usr/lib/chkpwd': Permission denied /usr/lib/tclConfig.sh found checking for tk... /usr/lib/tkConfig.sh found checking whether to check for runtime dependencies... yes checking for BWidget using /usr/bin/tclsh8.6... found checking for BLT using /usr/bin/tclsh8.6... not found checking for tclX using /usr/bin/tclsh8.6... found checking for python pango module... found checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X11/extensions/Xinerama.h... yes checking for XineramaQueryExtension in -lXinerama... yes checking for readline/readline.h... yes checking for readline/history.h... yes Trying readline without -ltermcap checking for readline in -lreadline... yes Trying readline with -ltermcap checking for readline in -lreadline... no Readline does not require -ltermcap checking whether readline license is compatible with GPL-2... no configure: WARNING: The LinuxCNC binary you are building may not be distributable due to a license incompatibility with LinuxCNC (some portions GPL-2 only) and Readline version 6 and greater (GPL-3 or later). configure: WARNING: User requested to enable non-distributable builds. Continuing. checking for locale.h... yes checking for setlocale... yes checking for libintl.h... yes checking for gettext in -lintl... no checking for xgettext... /usr/bin/xgettext checking for msgfmt... /usr/bin/msgfmt checking python version... OK checking match between tk and Tkinter versions... 8.6 checking for site-package location... /usr/lib/python3/site-packages checking for working GLU quadrics... yes checking for Xmu headers... checking for X11/Xmu/Xmu.h... yes configure: creating ./config.status config.status: creating ../scripts/rtapi.conf config.status: creating ../scripts/linuxcnc config.status: creating ../scripts/linuxcnc_info config.status: creating ../scripts/halrun config.status: creating ../scripts/rip-environment config.status: creating ../scripts/haltcl config.status: creating ../scripts/halcmd_twopass config.status: creating ../scripts/realtime config.status: creating ../scripts/runtests config.status: creating ../scripts/linuxcnc_var config.status: creating ../scripts/linuxcnc-checklink config.status: creating Makefile.inc config.status: creating Makefile.modinc config.status: creating ../tcl/linuxcnc.tcl config.status: creating ../lib/python/nf.py config.status: creating ../scripts/linuxcncmkdesktop config.status: creating ../share/applications/linuxcnc-latency.desktop config.status: creating ../share/applications/linuxcnc-latency-histogram.desktop config.status: creating ../share/applications/linuxcnc-pncconf.desktop config.status: creating ../share/applications/linuxcnc-stepconf.desktop config.status: creating ../share/applications/linuxcnc.desktop config.status: creating ../share/desktop-directories/linuxcnc-cnc.directory config.status: creating ../share/desktop-directories/linuxcnc-ref.directory config.status: creating ../share/desktop-directories/linuxcnc-doc.directory config.status: creating ../share/menus/CNC.menu config.status: creating config.h configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext ###################################################################### # LinuxCNC - Enhanced Machine Controller # ###################################################################### # # # LinuxCNC is a software system for computer control of machine # # tools such as milling machines. LinuxCNC is released under the # # GPL. Check out http://www.linuxcnc.org/ for more details. # # # # # # It seems that ./configure completed successfully. # # This means that RT is properly installed # # If things don't work check config.log for errors & warnings # # # # warning: If you already have an installed linuxcnc, this will # # replace an existing installation. If you have installed # # a linuxcnc package, this will damage the package. # # hint: To test a self-built version of linuxcnc without damaging # # the package version, don't specify a --prefix # # # # Next compile by typing # # make # # then install it by typing # # sudo make install # # # # To run the software type # # linuxcnc # # # ###################################################################### + make -j16 make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/115 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating abs.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating and2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating abs_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating anglejog.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating axistest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bin2gray.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating biquad.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bitslice.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bitwise.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bldc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating carousel.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating blend.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating charge_pump.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarke2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarke3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarkeinv.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating comp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating constant.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating corexy_by_hal.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating dbounce.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ddt.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating deadzone.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating demux.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating differential.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating div2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating edge.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating eoffset_per_angle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating estop_latch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating feedcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating filter_kalman.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating flipflop.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gantry.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gearchange.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gray2bin.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating histobins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating homecomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating hypot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ilowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating integ.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating invert.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating joyhandle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating knob2float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating latencybins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit1.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit_axis.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lincurve.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating logic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lut5.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating maj3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating match8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating max31855.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_pktgyro_test.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating message.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating millturn.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating minmax.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating moveoff.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mult2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating multiswitch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating multiclick.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux16.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux4.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating near.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating not.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating offset.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ohmic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating oneshot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating or2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating orient.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating plasmac.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sample_hold.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating scale.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating scaled_s32_sums.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating select8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_axis_hardware.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_home_switch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_matrix_kb.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_parport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating simple_tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sphereprobe.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating spindle_monitor.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating steptest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sum2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating thc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating thcud.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating threadtest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating time.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating timedelay.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating timedelta.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tof.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating toggle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating toggle2nist.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ton.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tristate_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating updown.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tristate_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating userkins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating wcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xhc_hb04_util.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xor2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xyzab_tdr_kins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating serport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_7i65.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_uart.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_float_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_float_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/237 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' sed hal/drivers/mesa_uart.comp -e "1 s/mesa_uart/mesa_uart_test/" > ../tests/halcompile/serial-out-of-tree/mesa_uart_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' sed ../docs/src/hal/rand.comp -e "1 s/rand/rand_test/" > ../tests/halcompile/userspace/rand_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp ../scripts/rtapi.conf ../tests/uspace/spawnv-root/rtapi.conf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_timer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/shm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_shm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/sem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/phantom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/rcs/rcs_exit.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/posemath.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/memsem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/timer.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_sem.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/locmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/rcs/rcs_print.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/recvn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/sendn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/physmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_pm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/shmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_up.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_in.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/tcp_opts.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_aup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/cmd_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_dup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_oi.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_cfg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nmlmsg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_xup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nmldiag.cc libnml/nml/nmldiag.cc: In function 'int nml_print_diag_list()': libnml/nml/nmldiag.cc:134:26: warning: the address of 'CMS::BufferName' will never be NULL [-Waddress] 134 | if (NULL != nml->cms->BufferName) { | ^ In file included from libnml/cms/cmsdiag.hh:18, from libnml/nml/nmldiag.hh:18, from libnml/nml/nmldiag.cc:16: libnml/cms/cms.hh:354:10: note: 'CMS::BufferName' declared here 354 | char BufferName[LINELEN]; | ^~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/stat_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/linklist/linklist.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_ulapi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_string.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cmsdiag.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/tcp_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' :1: SyntaxWarning: invalid escape sequence '\.' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in config.status: creating ../docs/man/man1/linuxcnc.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/tcpmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_parport.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/rtapi_pci.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/streamer_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/halstreamer.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/halstreamer.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml" Note: Writing halstreamer.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/sampler_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/mqtt-publisher.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/mqtt-publisher.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml" Note: Writing mqtt-publisher.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/emccalib.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/emccalib.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml" Note: Writing emccalib.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/inifile/inivar.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/sendkeys.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/sendkeys.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml" Note: Writing sendkeys.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/svd-ps_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/svd-ps_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml" Note: Writing svd-ps_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/hy_gt_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/hy_gt_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml" Note: Writing hy_gt_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_modbus.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man3/hm2_pktuart.3` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man3', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man3/hm2_pktuart.3.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml" Note: Writing hm2_pktuart.3 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/panelui.c hal/components/panelui.c: In function 'main': hal/components/panelui.c:211:5: warning: 'Py_SetProgramName' is deprecated [-Wdeprecated-declarations] 211 | Py_SetProgramName(wname); | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from hal/components/panelui.c:73: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_init.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/streamer.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/streamer.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml" Note: Writing streamer.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/inifile/inifile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/enum.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/enum.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml" Note: Writing enum.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/gs2_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/hy_gt_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/shuttle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/svd-ps_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/sendkeys.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/vfs11_vfd/vfs11_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_mod.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/config.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/xhc-whb04b-6.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/xhc-whb04b-6.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml" Note: Writing xhc-whb04b-6.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/emc_mods.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files_project.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/protocol_modbus_slave.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/protocol_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/serial_linux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/classicladder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/socket_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/socket_server.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/drawing_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/classicladder_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/drawing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/config_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/editproperties_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/vars_names.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halsh.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_main.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_completion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/manager_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script elbpcom Copying python script elbpcom make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_app.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script modcompile Copying python script modcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying Modbus template mesa_modbus.c.tmpl make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halrmt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/spy_vars_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/symbols_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/huanyang-vfd/hy_comm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-hb04.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/vfdb_vfd/vfdb_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/huanyang-vfd/hy_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/miscgtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/meter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_horiz.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_commands.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_vert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_trig.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_disp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/pendant-types.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcargs.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/modal_state.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/canon_position.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcops.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/usb.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/xhc-whb04b6.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/hal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/sockets.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/main.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inihal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/interpl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/emcIniFile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/shcom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/emcmotglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/iniaxis.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inijoint.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/pendant.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_mmap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inispindle.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_db.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_common.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/initraj.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/backtrace.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/schedrmt.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcrsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emclcd.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcsched.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emccanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_base.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/halui.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emcsvr.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_arc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/usrmotintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_array.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_check.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emctaskmain.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_queue.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_cycles.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_find.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_execute.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_inverse.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emctask.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_internal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/nurbs_additional_functions.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_write.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_convert.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_read.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_o_word.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_g7x.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_inspection.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_python.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/ugenserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_setup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_namedparams.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_remap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/canterp/canterp.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion-logger/motion-logger.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/iotask/ioControl.cc emc/iotask/ioControl.cc: In function 'int main(int, char**)': emc/iotask/ioControl.cc:694:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 694 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:695:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 695 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:696:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 696 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/cs/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling module_helper/module_helper.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/iotask/ioControl_v2.cc emc/iotask/ioControl_v2.cc: In function 'int main(int, char**)': emc/iotask/ioControl_v2.cc:791:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 791 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:792:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 792 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:793:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 793 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/da/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/de/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/es/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyparamclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/fi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/saicanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/dummyemcstat.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/fr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/hu/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/it/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ja/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/pl/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/nb/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ro/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ru/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sk/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sv/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/cs/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/vi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/da/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/de/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/es/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/fr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/it/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/hu/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/nb/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/pl/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/sk/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/sr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/linuxcnc.h ../include/linuxcnc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyblock.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/vi/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/emcIniFile.hh ../include/emcIniFile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/iniaxis.hh ../include/iniaxis.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inijoint.hh ../include/inijoint.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inispindle.hh ../include/inispindle.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/initraj.hh ../include/initraj.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inihal.hh ../include/inihal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/cubic.h ../include/cubic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/kinematics.h ../include/kinematics.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/switchkins.h ../include/switchkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/genhexkins.h ../include/genhexkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/genserkins.h ../include/genserkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/pentakins.h ../include/pentakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/pumakins.h ../include/pumakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tc.h ../include/tc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tc_types.h ../include/tc_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tcq.h ../include/tcq.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tp.h ../include/tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tp_types.h ../include/tp_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/spherical_arc.h ../include/spherical_arc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/blendmath.h ../include/blendmath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/emcmotcfg.h ../include/emcmotcfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/motion.h ../include/motion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/homing.h ../include/homing.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/simple_tp.h ../include/simple_tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/state_tag.h ../include/state_tag.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/usrmotintf.h ../include/usrmotintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/axis.h ../include/axis.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/canon.hh ../include/canon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/canon_position.hh ../include/canon_position.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emctool.h ../include/emctool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emc.hh ../include/emc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emc_nml.hh ../include/emc_nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emccfg.h ../include/emccfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcglb.h ../include/emcglb.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcpos.h ../include/emcpos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcpose.h ../include/emcpose.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/interp_return.hh ../include/interp_return.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/interpl.hh ../include/interpl.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/motion_types.h ../include/motion_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/debugflags.h ../include/debugflags.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/rs274ngc_pre.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_internal.hh ../include/interp_internal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_fwd.hh ../include/interp_fwd.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_base.hh ../include/interp_base.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/modal_state.hh ../include/modal_state.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/rs274ngc.hh ../include/rs274ngc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/sai/saicanon.hh ../include/saicanon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/hal.h ../include/hal.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/hal_parport.h ../include/hal_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/drivers/mesa-hostmot2/hostmot2-serial.h ../include/hostmot2-serial.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/locmem.hh ../include/locmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/memsem.hh ../include/memsem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/physmem.hh ../include/physmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/phantom.hh ../include/phantom.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/recvn.h ../include/recvn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/rem_msg.hh ../include/rem_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/sendn.h ../include/sendn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/shmem.hh ../include/shmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/tcpmem.hh ../include/tcpmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms.hh ../include/cms.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_aup.hh ../include/cms_aup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_dup.hh ../include/cms_dup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_cfg.hh ../include/cms_cfg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_srv.hh ../include/cms_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_up.hh ../include/cms_up.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_user.hh ../include/cms_user.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_xup.hh ../include/cms_xup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cmsdiag.hh ../include/cmsdiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/tcp_opts.hh ../include/tcp_opts.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/tcp_srv.hh ../include/tcp_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/inifile/inifile.h ../include/inifile.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/inifile/inifile.hh ../include/inifile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/linklist/linklist.hh ../include/linklist.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/cmd_msg.hh ../include/cmd_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml.hh ../include/nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_mod.hh ../include/nml_mod.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_srv.hh ../include/nml_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_oi.hh ../include/nml_oi.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_type.hh ../include/nml_type.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nmldiag.hh ../include/nmldiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nmlmsg.hh ../include/nmlmsg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/stat_msg.hh ../include/stat_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_sem.h ../include/_sem.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/sem.hh ../include/sem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_shm.h ../include/_shm.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/shm.hh ../include/shm.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_timer.h ../include/_timer.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/timer.hh ../include/timer.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/posemath.h ../include/posemath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/gomath.h ../include/gomath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/gotypes.h ../include/gotypes.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/sincos.h ../include/sincos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs.hh ../include/rcs.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs_exit.hh ../include/rcs_exit.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs_print.hh ../include/rcs_print.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcsversion.h ../include/rcsversion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi.h ../include/rtapi.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_atomic.h ../include/rtapi_atomic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_app.h ../include/rtapi_app.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_bitops.h ../include/rtapi_bitops.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_byteorder.h ../include/rtapi_byteorder.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_bool.h ../include/rtapi_bool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_device.h ../include/rtapi_device.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_firmware.h ../include/rtapi_firmware.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_io.h ../include/rtapi_io.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_gfp.h ../include/rtapi_gfp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_limits.h ../include/rtapi_limits.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_list.h ../include/rtapi_list.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math.h ../include/rtapi_math.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math_i386.h ../include/rtapi_math_i386.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math64.h ../include/rtapi_math64.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_mutex.h ../include/rtapi_mutex.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_parport.h ../include/rtapi_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_pci.h ../include/rtapi_pci.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_slab.h ../include/rtapi_slab.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_stdint.h ../include/rtapi_stdint.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_ctype.h ../include/rtapi_ctype.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_errno.h ../include/rtapi_errno.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_string.h ../include/rtapi_string.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_vsnprintf.h ../include/rtapi_vsnprintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/driver.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/da.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/cs.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/fi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/hu.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/de.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/es.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/fr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ja.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/it.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/nb.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/pl.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/pt_BR.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ro.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sk.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ru.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sv.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/vi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyemctypes.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_CN.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_HK.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_TW.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/pythonplugin/python_plugin.cc emc/pythonplugin/python_plugin.cc: In constructor 'PythonPlugin::PythonPlugin(_inittab*)': emc/pythonplugin/python_plugin.cc:298:22: warning: 'void Py_SetProgramName(const wchar_t*)' is deprecated [-Wdeprecated-declarations] 298 | Py_SetProgramName(program); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from /usr/include/boost/python/detail/wrap_python.hpp:178, from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/ssize_t.hpp:9, from /usr/include/boost/python/object.hpp:8, from emc/pythonplugin/python_plugin.hh:25, from emc/pythonplugin/python_plugin.cc:19: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ emc/pythonplugin/python_plugin.cc:326:3: warning: 'Py_UnbufferedStdioFlag' is deprecated [-Wdeprecated-declarations] 326 | Py_UnbufferedStdioFlag = 1; | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:48: /usr/include/python3.12/cpython/pydebug.h:20:37: note: declared here 20 | Py_DEPRECATED(3.12) PyAPI_DATA(int) Py_UnbufferedStdioFlag; | ^~~~~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pyvcp Copying python script pyvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/canonmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_input Copying python script hal_input make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script scorbot-er-3 Copying python script scorbot-er-3 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gladevcp Copying python script gladevcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mitsub_vfd Copying python script mitsub_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pmx485 Copying python script pmx485 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script sim-torch Copying python script sim-torch make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script z_level_compensation Copying python script z_level_compensation make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mqtt-publisher Copying python script mqtt-publisher make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pumagui Copying python script pumagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script puma560gui Copying python script puma560gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script lineardelta Copying python script lineardelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script scaragui Copying python script scaragui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script 5axisgui Copying python script 5axisgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hexagui Copying python script hexagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script max5gui Copying python script max5gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script maho600gui Copying python script maho600gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hbmgui Copying python script hbmgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script rotarydelta Copying python script rotarydelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script melfagui Copying python script melfagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script millturngui Copying python script millturngui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzbc-trt-gui Copying python script xyzbc-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzab-tdr-gui Copying python script xyzab-tdr-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzac-trt-gui Copying python script xyzac-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script axis-remote Copying python script axis-remote make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script linuxcnctop Copying python script linuxcnctop make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_manualtoolchange Copying python script hal_manualtoolchange make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi Copying python script mdi make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script lintini Copying python script lintini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script debuglevel Copying python script debuglevel make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script axis Copying python script axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script teach-in Copying python script teach-in make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script image-to-gcode emc/usr_intf/axis/scripts/image-to-gcode.py:550: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {![regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" emc/usr_intf/axis/scripts/image-to-gcode.py:552: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {![regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" Copying python script image-to-gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file touchy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script tracking-test Copying python script tracking-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script touchy Copying python script touchy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_interface.py Copying python script hal_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script filechooser.py Copying python script filechooser.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script listing.py Copying python script listing.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying linuxcnc-wizard.gif make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file spindle.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file halui_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisx.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script stepconf emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script stepconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisz.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisu.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script import_mach.py Copying python script import_mach.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisv.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisa.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file help.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file mesa0.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file mesa1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file external.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script data.py emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file screen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file vcp.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script tests.py Copying python script tests.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file x_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file x_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script private_data.py Copying python script private_data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file y_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file y_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file z_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file z_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file a_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file a_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file s_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pncconf Copying python script pncconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file realtime.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/axis/extensions/_toglmodule.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file dialogs.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gscreen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gscreen2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gremlin Copying python script gremlin make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gremlin.py Copying python script gremlin.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qt5_graphics.py Copying python script qt5_graphics.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script keybindings.py Copying python script keybindings.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying INI script panelui_spec.ini cp emc/usr_intf/pyui/panelui_spec.ini ../lib/python/pyui/panelui_spec.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying INI script _panelui.ini cp emc/usr_intf/pyui/_panelui.ini ../lib/python/pyui/_panelui.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pyui Copying python script pyui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gscreen Copying python script gscreen make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script __init__.py Copying python script __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script master.py Copying python script master.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script panelui_validate.py Copying python script panelui_validate.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script commands.py Copying python script commands.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtvcp Copying python script qtvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gmoccapy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyarrays.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script getiniinfo.py Copying python script getiniinfo.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script dialogs.py Copying python script dialogs.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script notification.py Copying python script notification.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script player.py Copying python script player.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script icon_theme_helper.py Copying python script icon_theme_helper.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interpmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gmoccapy Copying python script gmoccapy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-materials emc/usr_intf/qtplasmac/qtplasmac-materials.py:288: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Tool\ number'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:294: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Kerf\ width'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:298: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:302: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ delay'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:305: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:309: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Feed\ rate'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:319: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pause\ at\ end\ of\ cut'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): Copying python script qtplasmac-materials make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-plasmac2qt Copying python script qtplasmac-plasmac2qt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-cfg2prefs Copying python script qtplasmac-cfg2prefs make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script M190 Copying python script M190 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pmx485-test Copying python script pmx485-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac_gcode Copying python script qtplasmac_gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdro Copying python script mdro make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script update_ini emc/ini/update_ini.py:17: SyntaxWarning: invalid escape sequence '\s' regex = "^\s*\[%s\](.+?)(?:^\s*\[|\Z)" % block emc/ini/update_ini.py:181: SyntaxWarning: invalid escape sequence '\s' all_sections = re.findall("^\s*\[(.+)\]", inistring, re.MULTILINE) emc/ini/update_ini.py:193: SyntaxWarning: invalid escape sequence '\[' section = re.match("(.*?)^\[", inistring, re.DOTALL | re.MULTILINE) emc/ini/update_ini.py:199: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:218: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[RS274NGC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:236: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMCMOT\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:267: SyntaxWarning: invalid escape sequence '\w' match = re.match('(?:#autoconverted|loadrt) +(\w+kins)', line) emc/ini/update_ini.py:270: SyntaxWarning: invalid escape sequence '\w' match = re.search('coordinates *= *(\w+)', line) emc/ini/update_ini.py:274: SyntaxWarning: invalid escape sequence '\w' match = re.search('kinstype *= *(\w+)', line) emc/ini/update_ini.py:289: SyntaxWarning: invalid escape sequence '\d' match = re.match('setp +gantrykins.joint-(\d) +(\d)', line) emc/ini/update_ini.py:301: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[TRAJ\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:309: SyntaxWarning: invalid escape sequence '\s' mv = re.findall("MAX_VELOCITY[\s=]+(\d*(\.\d+)?)", inistring, re.MULTILINE) emc/ini/update_ini.py:341: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[JOINT_%i\])"%j, inistring, re.MULTILINE): emc/ini/update_ini.py:342: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[AXIS_%s\])" % "XYZABCUVW"[j], inistring, re.MULTILINE): emc/ini/update_ini.py:388: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % J, inistring, re.DOTALL) emc/ini/update_ini.py:390: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % "XYZABCUVW".index(coordinates[J]), inistring, re.DOTALL) emc/ini/update_ini.py:394: SyntaxWarning: invalid escape sequence '\[' if not '\[AXIS_%i\]' % axisnum in subs: emc/ini/update_ini.py:395: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % axisnum : '[JOINT_%i]' % J}) emc/ini/update_ini.py:396: SyntaxWarning: invalid escape sequence '\.' subs2.update({'joint\.%i\.' % axisnum : 'joint.%i.' % J}) emc/ini/update_ini.py:398: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % J : '[JOINT_%i]' % J}) emc/ini/update_ini.py:487: SyntaxWarning: invalid escape sequence '\[' 'num_joints=\[TRAJ\]AXES': 'num_joints=[KINS]JOINTS', emc/ini/update_ini.py:498: SyntaxWarning: invalid escape sequence '\s' '^\s*setp\s+(joint\S+)\s+(axis\S+)\s+(\S+)\s*$': Copying python script update_ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/counter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/debounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/encoder_ratio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/enum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/halmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/boss_plc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/threads.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/mux_generic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/siggen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/supply.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/sim_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/weighted_sum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/lcd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/pid.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/modmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_speaker.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/sampler.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/streamer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/cpuinfo.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_pi_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_bb_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/bitfile.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/dpll.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/bspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/abs_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/axis/extensions/emcmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/led.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/inm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/inmux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hostmot2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/ioport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/gcodemodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_ppmc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/raw.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/rcpwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/ssr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_gm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/resolver.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/outm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pktuart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/tram.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/tp_pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_pci.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i90.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i43.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/module_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_spi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/xy2mod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/setsserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyinterp1.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/utils/scope_rt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/trivkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/maxkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rotatekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/tripodkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/corexykins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/kins_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_rpspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/lineardeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rosekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/userkfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/scorbot-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_eth.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rotarydeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/switchkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/xyzac-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/pentakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/xyzbc-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/sserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/scarakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/cubic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genhexkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/5axiskins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/trtfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/pumakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/homemod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tpmod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tcq.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/spherical_arc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' config.status: creating ../scripts/setup_designer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking liblinuxcnc.a make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/motion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script halcompile Copying python script halcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/homing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/command.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing abs.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing abs_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/blendmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/lineardeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnc_module_helper make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/rotarydeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing and2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing anglejog.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/control.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing axistest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing biquad.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bin2gray.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bitwise.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing blend.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bldc.comp :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing carousel.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing charge_pump.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarke2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarke3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarkeinv.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing constant.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing comp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library liblinuxcncini.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' tooldata: depends: objects/emc/tooldata/tooldata_mmap.o objects/emc/tooldata/tooldata_common.o objects/emc/tooldata/tooldata_db.o tooldata: Linking: libtooldata.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module _togl.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing corexy_by_hal.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing dbounce.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ddt.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing deadzone.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing demux.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing differential.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing div2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing edge.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing eoffset_per_angle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing estop_latch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing feedcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing filter_kalman.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing flipflop.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gantry.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gearchange.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gray2bin.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing homecomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing histobins.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing hypot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ilowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing integ.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing invert.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing joyhandle.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing knob2float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing latencybins.comp :1: SyntaxWarning: invalid escape sequence '\(' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit1.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit_axis.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lut5.comp :1: SyntaxWarning: invalid escape sequence '\*' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing maj3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing match8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing max31855.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_pktgyro_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing message.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing millturn.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library liblinuxcnchal.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing minmax.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing moveoff.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mult2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux16.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing multiswitch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing multiclick.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux4.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing near.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing not.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing offset.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ohmic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing oneshot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing or2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing orient.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sample_hold.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing scale.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing scaled_s32_sums.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing select8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_home_switch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_axis_hardware.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_matrix_kb.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing plasmac.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing simple_tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_parport.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sphereprobe.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing spindle_monitor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sum2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing steptest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thcud.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing threadtest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing time.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing timedelay.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing timedelta.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tof.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing toggle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing toggle2nist.comp :1: SyntaxWarning: invalid escape sequence '\[' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ton.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tristate_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tristate_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing updown.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing userkins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing wcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xhc_hb04_util.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xor2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xyzab_tdr_kins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing serport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_7i65.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library libposemath.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_uart.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/abs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/and2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/abs_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bin2gray.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/axistest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bitwise.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bitslice.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/charge_pump.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/blend.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarke2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarke3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/biquad.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/anglejog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/comp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/constant.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarkeinv.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_float_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_float_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/corexy_by_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/dbounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ddt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/deadzone.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/demux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/differential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/carousel.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/edge.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/estop_latch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/feedcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/div2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gray2bin.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gearchange.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/flipflop.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/filter_kalman.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/eoffset_per_angle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bldc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gantry.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/homecomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/integ.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/histobins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/hypot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ilowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/knob2float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/invert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit1.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/latencybins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/joyhandle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lincurve.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lut5.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/logic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/maj3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit_axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/match8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/message.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/minmax.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mult2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mesa_pktgyro_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/multiswitch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/millturn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/max31855.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux16.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/multiclick.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux4.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/not.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/offset.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/near.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking rtapi_app make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/or2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sample_hold.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/scale.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/scaled_s32_sums.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/select8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ohmic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_home_switch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/orient.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/moveoff.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sphereprobe.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sum2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/spindle_monitor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/steptest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/threadtest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/thcud.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/thc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/timedelay.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/time.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/timedelta.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tof.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/toggle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/toggle2nist.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ton.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tristate_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tristate_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_axis_hardware.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/updown.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/wcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xor2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/debounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/enum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/userkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/boss_plc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/serport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/mesa_uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/counter.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xhc_hb04_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/encoder_ratio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/stepgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xyzab_tdr_kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lcd.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/mesa_7i65.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/siggen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux_generic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pid.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pwmgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/supply.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/threads.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/weighted_sum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/modmath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/watchdog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/streamer.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sampler.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_speaker.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_ppmc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_bb_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_gm.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_pi_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_pci.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/setsserial.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_eth.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_7i43.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_spi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_rpspi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_7i90.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hostmot2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/classicladder_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/maxkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_lib.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/trivkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rotatekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scope_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tripodkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lineardeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rosekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pentakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/corexykins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scorbot-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf liblinuxcncini.so.0 ../lib/liblinuxcncini.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libposemath.so.0 ../lib/libposemath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rotarydeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/genhexkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf liblinuxcnchal.so.0 ../lib/liblinuxcnchal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/genserkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzac-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzbc-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scarakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pumakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/5axiskins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/motmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/homemod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage abs_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage abs.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tpmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage and2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage anglejog.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage axistest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage biquad.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bin2gray.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bitslice.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bitwise.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage blend.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage carousel.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage charge_pump.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bldc.9 :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarke2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarke3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarkeinv.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage comp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage constant.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_float_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking inivar make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_float_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage corexy_by_hal.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage dbounce.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage deadzone.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage demux.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage differential.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage div2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ddt.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage estop_latch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage edge.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage eoffset_per_angle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage feedcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage filter_kalman.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage flipflop.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gantry.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gearchange.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gray2bin.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage homecomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage hypot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage histobins.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ilowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage integ.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage invert.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage joyhandle.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage knob2float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit1.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage latencybins.9 :1: SyntaxWarning: invalid escape sequence '\(' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lincurve.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit_axis.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage logic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage maj3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lut5.9 :1: SyntaxWarning: invalid escape sequence '\*' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage match8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage max31855.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_pktgyro_test.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage message.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage millturn.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage minmax.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mult2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage moveoff.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage multiclick.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage multiswitch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux4.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux16.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage near.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage not.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage offset.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ohmic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage or2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage oneshot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage orient.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sample_hold.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage scale.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage scaled_s32_sums.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage select8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_home_switch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_matrix_kb.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage plasmac.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_axis_hardware.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage simple_tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_parport.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sphereprobe.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage steptest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage spindle_monitor.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sum2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thcud.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage threadtest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage time.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage timedelay.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage timedelta.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/plasmac.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tof.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage toggle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage toggle2nist.9 :1: SyntaxWarning: invalid escape sequence '\[' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ton.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tristate_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tristate_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage updown.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage userkins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage wcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xhc_hb04_util.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xor2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xyzab_tdr_kins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tpcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage serport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_uart.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_7i65.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thermistor.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thermistor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halstreamer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halsampler make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking panelui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking shuttle make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking sendkeys make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hy_gt_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking svd-ps_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing wj200_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing pi500_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking gs2_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking vfs11_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking vfdb_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libtooldata.so.0 ../lib/libtooldata.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking xhc-hb04 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halmeter make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hy_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking mb2hal make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' emc/Submakefile:Linking genserkins make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/abs_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/abs.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/and2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/anglejog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/axistest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bin2gray.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bitslice.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module rotarydeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/rotarydeltakins.so objects/emc/kinematics/rotarydeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module lineardeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/lineardeltakins.so objects/emc/kinematics/lineardeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/biquad.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bitwise.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/blend.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bldc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/carousel.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarke2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/charge_pump.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarke3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarkeinv.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/comp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/constant.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_float_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_float_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/corexy_by_hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ddt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module _hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/dbounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/deadzone.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/demux.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/differential.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/div2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/edge.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/eoffset_per_angle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/estop_latch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/feedcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/filter_kalman.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/flipflop.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gantry.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gearchange.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/histobins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gray2bin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/homecomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hypot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ilowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/integ.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/invert.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/joyhandle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/knob2float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/latencybins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit1.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lincurve.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit_axis.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/logic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/maj3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lut5.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/match8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/max31855.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_pktgyro_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/message.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/millturn.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/minmax.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/moveoff.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mult2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/multiclick.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/multiswitch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux16.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux4.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halscope make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/near.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/not.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/offset.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ohmic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/oneshot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/or2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/orient.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sample_hold.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/plasmac.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scaled_s32_sums.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scale.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/select8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_axis_hardware.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_home_switch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halcmd hal/utils/../hal_priv.h:135:27: warning: type of 'hal_data' does not match original declaration [-Wlto-type-mismatch] 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:246:16: note: type 'struct hal_data_t' should match type 'struct hal_data_t' 246 | typedef struct hal_data_t { | ^ hal/utils/../hal_priv.h:135:27: note: 'hal_data' was previously declared here 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:135:27: note: code may be misoptimized unless '-fno-strict-aliasing' is used make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/simple_tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sphereprobe.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/spindle_monitor.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/steptest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sum2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/threadtest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/thc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/timedelay.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/time.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/thcud.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/timedelta.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tof.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/toggle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/toggle2nist.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ton.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tristate_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tristate_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking libpyplugin.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,libpyplugin.so.0 -shared -o ../lib/libpyplugin.so.0 objects/emc/pythonplugin/python_plugin.o ../lib/liblinuxcncini.so -lstdc++ -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/userkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/wcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/updown.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xhc_hb04_util.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libpyplugin.so.0 ../lib/libpyplugin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xor2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzab_tdr_kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_uart.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking classicladder make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/serport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_7i65.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling objects/hal/user_comps/thermistor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/wj200_vfd/wj200_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/pi500_vfd/pi500_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking thermistor make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking xhc-whb04b-6 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking wj200_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking pi500_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library libnml.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libnml.so.0 ../lib/libnml.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking motion-logger make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcncsvr make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnclcd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking io make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking schedrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' emc/tooldata/tool_watch.cc: In function 'int main(int, char**)': emc/tooldata/tool_watch.cc:56:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 56 | fprintf(stderr,"%8ld EMC_STAT\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:57:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 57 | fprintf(stderr,"%8ld EMC_IO_STAT\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:58:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 58 | fprintf(stderr,"%8ld EMC_TOOL_STAT\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:59:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 59 | fprintf(stderr,"%8ld EMC_COOLANT_STAT\n",sizeof(EMC_COOLANT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:60:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 60 | fprintf(stderr,"%8ld EMC_AUX_STAT\n",sizeof(EMC_AUX_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:61:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 61 | fprintf(stderr,"%8ld EMC_LUBE_STAT\n",sizeof(EMC_LUBE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:62:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 62 | fprintf(stderr,"%8ld EMC_TASK_STAT\n",sizeof(EMC_TASK_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:63:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 63 | fprintf(stderr,"%8ld EMC_MOTION_STAT\n",sizeof(EMC_MOTION_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:64:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 64 | fprintf(stderr,"%8ld EMC_TRAJ_STAT\n",sizeof(EMC_TRAJ_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:65:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 65 | fprintf(stderr,"%8ld EMC_JOINT_STAT\n",sizeof(EMC_JOINT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:66:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 66 | fprintf(stderr,"%8ld EMC_AXIS_STAT\n",sizeof(EMC_AXIS_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:67:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 67 | fprintf(stderr,"%8ld EMC_SPINDLE_STAT\n",sizeof(EMC_SPINDLE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking librs274.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,librs274.so.0 -shared -o ../lib/librs274.so.0 objects/emc/rs274ngc/interp_arc.o objects/emc/rs274ngc/interp_array.o objects/emc/rs274ngc/interp_base.o objects/emc/rs274ngc/interp_check.o objects/emc/rs274ngc/interp_convert.o objects/emc/rs274ngc/interp_queue.o objects/emc/rs274ngc/interp_cycles.o objects/emc/rs274ngc/interp_execute.o objects/emc/rs274ngc/interp_find.o objects/emc/rs274ngc/interp_internal.o objects/emc/rs274ngc/interp_inverse.o objects/emc/rs274ngc/interp_read.o objects/emc/rs274ngc/interp_write.o objects/emc/rs274ngc/interp_o_word.o objects/emc/rs274ngc/interp_g7x.o objects/emc/rs274ngc/modal_state.o objects/emc/rs274ngc/nurbs_additional_functions.o objects/emc/rs274ngc/interp_namedparams.o objects/emc/rs274ngc/interp_python.o objects/emc/rs274ngc/interp_remap.o objects/emc/rs274ngc/interp_setup.o objects/emc/rs274ngc/canonmodule.o objects/emc/rs274ngc/pyparamclass.o objects/emc/rs274ngc/pyemctypes.o objects/emc/rs274ngc/pyinterp1.o objects/emc/rs274ngc/pyblock.o objects/emc/rs274ngc/pyarrays.o objects/emc/rs274ngc/interpmodule.o objects/emc/rs274ngc/rs274ngc_pre.o objects/emc/rs274ngc/interp_inspection.o ../lib/liblinuxcncini.so ../lib/libpyplugin.so ../lib/liblinuxcnchal.so.0 ../lib/libtooldata.so.0 -lstdc++ -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf librs274.so.0 ../lib/librs274.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking iov2 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking canterp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcncrsh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module gcode.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/gcode.so objects/emc/rs274ngc/gcodemodule.o ../lib/librs274.so.0 -lstdc++ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking rs274 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking milltask c++ -std=gnu++17 -o ../bin/milltask objects/emc/motion/emcmotglb.o objects/emc/task/emctask.o objects/emc/task/emccanon.o objects/emc/task/emctaskmain.o objects/emc/motion/usrmotintf.o objects/emc/motion/emcmotutil.o objects/emc/task/taskintf.o objects/emc/motion/dbuf.o objects/emc/motion/stashf.o objects/emc/task/taskmodule.o objects/emc/task/taskclass.o objects/emc/task/backtrace.o ../lib/librs274.so.0 ../lib/liblinuxcnc.a ../lib/libnml.so.0 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/liblinuxcnchal.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' + popd ~/RPM/BUILD/linuxcnc-2.9.2 + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.14095 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/linuxcnc-buildroot + : + /bin/rm -rf -- /usr/src/tmp/linuxcnc-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/games + cd linuxcnc-2.9.2 + pushd src ~/RPM/BUILD/linuxcnc-2.9.2/src ~/RPM/BUILD/linuxcnc-2.9.2 + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/linuxcnc-buildroot make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/bin \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../rtlib/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules /usr/libexec/rpm-build/install -p -m 4755 ../bin/linuxcnc_module_helper /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 4755 ../bin/rtapi_app /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../scripts/rtapi.conf /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/src/tmp/linuxcnc-buildroot/usr/lib \ /usr/src/tmp/linuxcnc-buildroot/lib/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles \ /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/*.py ../lib/python/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/rs274/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/touchy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gscreen/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/*.{py,ui,txt} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/designer/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/widget_icons/*.{png,gif} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/plugins/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins cp -dR ../lib/python/qtvcp/lib/* /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gmoccapy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/*.{py,png,glade} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/stepconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pncconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pyui/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/plasmac/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0755 ../bin/stepconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pncconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_input /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mitsub_vfd /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mqtt-publisher /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/z_level_compensation /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pmx485 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/sim-torch /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gladevcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis-remote /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/debuglevel /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/linuxcnctop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mdi /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_manualtoolchange /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/image-to-gcode /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/touchy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gscreen /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../lib/python/qtvcp/designer/install_script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -m 0755 ../bin/gmoccapy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/teach-in /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/scorbot-er-3 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pumagui ../bin/puma560gui ../bin/lineardelta ../bin/scaragui ../bin/hexagui ../bin/5axisgui ../bin/max5gui ../bin/maho600gui ../bin/hbmgui ../bin/rotarydelta ../bin/melfagui ../bin/millturngui ../bin/xyzac-trt-gui ../bin/xyzbc-trt-gui ../bin/xyzab-tdr-gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtplasmac-materials ../bin/qtplasmac-plasmac2qt ../bin/qtplasmac-cfg2prefs ../bin/qtplasmac_gcode ../bin/pmx485-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/linuxcnc-wizard.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/images/*.{png,gif,xbm,ngc} /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/tcl/*.tcl /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl /usr/libexec/rpm-build/install -p -m 0644 ../share/gscreen/images/*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images cp -dR ../share/gscreen/skins/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins cp -dR ../share/qtvcp/images/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images cp -dR ../share/qtvcp/screens/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens cp -dR ../share/qtvcp/panels/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels cp -dR ../share/qtvcp/widgets_ui/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui cp -dR ../share/gmoccapy/icons/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man1/*.1 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/hal_add_funct_to_thread.3hal ../docs/man/man3/hal_bit_t.3hal ../docs/man/man3/hal_bool.3hal ../docs/man/man3/hal_create_thread.3hal ../docs/man/man3/hal_del_funct_from_thread.3hal ../docs/man/man3/hal_exit.3hal ../docs/man/man3/hal_export_funct.3hal ../docs/man/man3/hal_float_t.3hal ../docs/man/man3/hal_get_lock.3hal ../docs/man/man3/hal_init.3hal ../docs/man/man3/hal_link.3hal ../docs/man/man3/hal_malloc.3hal ../docs/man/man3/hal_param_alias.3hal ../docs/man/man3/hal_param_bit_new.3hal ../docs/man/man3/hal_param_bit_newf.3hal ../docs/man/man3/hal_param_float_new.3hal ../docs/man/man3/hal_param_float_newf.3hal ../docs/man/man3/hal_param_new.3hal ../docs/man/man3/hal_param_s32_new.3hal ../docs/man/man3/hal_param_s32_newf.3hal ../docs/man/man3/hal_param_u32_new.3hal ../docs/man/man3/hal_param_u32_newf.3hal ../docs/man/man3/hal_parport.3hal ../docs/man/man3/hal_pin_alias.3hal ../docs/man/man3/hal_pin_bit_new.3hal ../docs/man/man3/hal_pin_bit_newf.3hal ../docs/man/man3/hal_pin_float_new.3hal ../docs/man/man3/hal_pin_float_newf.3hal ../docs/man/man3/hal_pin_new.3hal ../docs/man/man3/hal_pin_port_new.3hal ../docs/man/man3/hal_pin_port_newf.3hal ../docs/man/man3/hal_pin_s32_new.3hal ../docs/man/man3/hal_pin_s32_newf.3hal ../docs/man/man3/hal_pin_u32_new.3hal ../docs/man/man3/hal_pin_u32_newf.3hal ../docs/man/man3/hal_port.3hal ../docs/man/man3/hal_ready.3hal ../docs/man/man3/hal_s32_t.3hal ../docs/man/man3/hal_set_constructor.3hal ../docs/man/man3/hal_set_lock.3hal ../docs/man/man3/hal_signal_delete.3hal ../docs/man/man3/hal_signal_new.3hal ../docs/man/man3/hal_start_threads.3hal ../docs/man/man3/hal_stream.3hal ../docs/man/man3/hal_type_t.3hal ../docs/man/man3/hal_u32_t.3hal ../docs/man/man3/hal_unlink.3hal ../docs/man/man3/intro.3hal ../docs/man/man3/undocumented.3hal /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/EXPORT_FUNCTION.3rtapi ../docs/man/man3/MODULE_AUTHOR.3rtapi ../docs/man/man3/MODULE_DESCRIPTION.3rtapi ../docs/man/man3/MODULE_LICENSE.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi ../docs/man/man3/RTAPI_MP_INT.3rtapi ../docs/man/man3/RTAPI_MP_LONG.3rtapi ../docs/man/man3/RTAPI_MP_STRING.3rtapi ../docs/man/man3/intro.3rtapi ../docs/man/man3/rtapi_app_exit.3rtapi ../docs/man/man3/rtapi_app_main.3rtapi ../docs/man/man3/rtapi_atomic.3rtapi ../docs/man/man3/rtapi_bool.3rtapi ../docs/man/man3/rtapi_byteorder.3rtapi ../docs/man/man3/rtapi_clock_set_period.3rtapi ../docs/man/man3/rtapi_delay.3rtapi ../docs/man/man3/rtapi_delay_max.3rtapi ../docs/man/man3/rtapi_device.3rtapi ../docs/man/man3/rtapi_div_u64.3rtapi ../docs/man/man3/rtapi_div_u64_rem.3rtapi ../docs/man/man3/rtapi_exit.3rtapi ../docs/man/man3/rtapi_firmware.3rtapi ../docs/man/man3/rtapi_get_clocks.3rtapi ../docs/man/man3/rtapi_get_msg_level.3rtapi ../docs/man/man3/rtapi_get_time.3rtapi ../docs/man/man3/rtapi_gfp.3rtapi ../docs/man/man3/rtapi_inb.3rtapi ../docs/man/man3/rtapi_init.3rtapi ../docs/man/man3/rtapi_io.3rtapi ../docs/man/man3/rtapi_is.3rtapi ../docs/man/man3/rtapi_list.3rtapi ../docs/man/man3/rtapi_module_param.3rtapi ../docs/man/man3/rtapi_mutex.3rtapi ../docs/man/man3/rtapi_open_as_root.3rtapi ../docs/man/man3/rtapi_outb.3rtapi ../docs/man/man3/rtapi_parport.3rtapi ../docs/man/man3/rtapi_pci.3rtapi ../docs/man/man3/rtapi_print.3rtapi ../docs/man/man3/rtapi_prio.3rtapi ../docs/man/man3/rtapi_prio_highest.3rtapi ../docs/man/man3/rtapi_prio_lowest.3rtapi ../docs/man/man3/rtapi_prio_next_higher.3rtapi ../docs/man/man3/rtapi_prio_next_lower.3rtapi ../docs/man/man3/rtapi_region.3rtapi ../docs/man/man3/rtapi_release_region.3rtapi ../docs/man/man3/rtapi_request_region.3rtapi ../docs/man/man3/rtapi_set_msg_level.3rtapi ../docs/man/man3/rtapi_shmem.3rtapi ../docs/man/man3/rtapi_shmem_delete.3rtapi ../docs/man/man3/rtapi_shmem_getptr.3rtapi ../docs/man/man3/rtapi_shmem_new.3rtapi ../docs/man/man3/rtapi_slab.3rtapi ../docs/man/man3/rtapi_snprintf.3rtapi ../docs/man/man3/rtapi_stdint.3rtapi ../docs/man/man3/rtapi_string.3rtapi ../docs/man/man3/rtapi_strlcpy.3rtapi ../docs/man/man3/rtapi_task_delete.3rtapi ../docs/man/man3/rtapi_task_new.3rtapi ../docs/man/man3/rtapi_task_pause.3rtapi ../docs/man/man3/rtapi_task_resume.3rtapi ../docs/man/man3/rtapi_task_self.3rtapi ../docs/man/man3/rtapi_task_start.3rtapi ../docs/man/man3/rtapi_task_wait.3rtapi ../docs/man/man3/undocumented.3rtapi /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man9/abs.9 ../docs/man/man9/abs_s32.9 ../docs/man/man9/and2.9 ../docs/man/man9/anglejog.9 ../docs/man/man9/at_pid.9 ../docs/man/man9/axis.9 ../docs/man/man9/axistest.9 ../docs/man/man9/bin2gray.9 ../docs/man/man9/biquad.9 ../docs/man/man9/bitslice.9 ../docs/man/man9/bitwise.9 ../docs/man/man9/bldc.9 ../docs/man/man9/blend.9 ../docs/man/man9/carousel.9 ../docs/man/man9/charge_pump.9 ../docs/man/man9/clarke2.9 ../docs/man/man9/clarke3.9 ../docs/man/man9/clarkeinv.9 ../docs/man/man9/classicladder.9 ../docs/man/man9/comp.9 ../docs/man/man9/constant.9 ../docs/man/man9/conv_bit_float.9 ../docs/man/man9/conv_bit_s32.9 ../docs/man/man9/conv_bit_u32.9 ../docs/man/man9/conv_float_s32.9 ../docs/man/man9/conv_float_u32.9 ../docs/man/man9/conv_s32_bit.9 ../docs/man/man9/conv_s32_float.9 ../docs/man/man9/conv_s32_u32.9 ../docs/man/man9/conv_u32_bit.9 ../docs/man/man9/conv_u32_float.9 ../docs/man/man9/conv_u32_s32.9 ../docs/man/man9/corexy_by_hal.9 ../docs/man/man9/counter.9 ../docs/man/man9/dbounce.9 ../docs/man/man9/ddt.9 ../docs/man/man9/deadzone.9 ../docs/man/man9/debounce.9 ../docs/man/man9/demux.9 ../docs/man/man9/differential.9 ../docs/man/man9/div2.9 ../docs/man/man9/edge.9 ../docs/man/man9/encoder.9 ../docs/man/man9/encoder_ratio.9 ../docs/man/man9/enum.9 ../docs/man/man9/eoffset_per_angle.9 ../docs/man/man9/estop_latch.9 ../docs/man/man9/feedcomp.9 ../docs/man/man9/filter_kalman.9 ../docs/man/man9/flipflop.9 ../docs/man/man9/gantry.9 ../docs/man/man9/gantrykins.9 ../docs/man/man9/gearchange.9 ../docs/man/man9/genhexkins.9 ../docs/man/man9/genserkins.9 ../docs/man/man9/gentrivkins.9 ../docs/man/man9/gladevcp.9 ../docs/man/man9/gray2bin.9 ../docs/man/man9/hal_bb_gpio.9 ../docs/man/man9/hal_parport.9 ../docs/man/man9/histobins.9 ../docs/man/man9/hm2_7i43.9 ../docs/man/man9/hm2_7i90.9 ../docs/man/man9/hm2_eth.9 ../docs/man/man9/hm2_pci.9 ../docs/man/man9/hm2_rpspi.9 ../docs/man/man9/hm2_spi.9 ../docs/man/man9/homecomp.9 ../docs/man/man9/hostmot2.9 ../docs/man/man9/hypot.9 ../docs/man/man9/ilowpass.9 ../docs/man/man9/integ.9 ../docs/man/man9/invert.9 ../docs/man/man9/joyhandle.9 ../docs/man/man9/kins.9 ../docs/man/man9/knob2float.9 ../docs/man/man9/latencybins.9 ../docs/man/man9/lcd.9 ../docs/man/man9/limit1.9 ../docs/man/man9/limit2.9 ../docs/man/man9/limit3.9 ../docs/man/man9/limit_axis.9 ../docs/man/man9/lincurve.9 ../docs/man/man9/lineardeltakins.9 ../docs/man/man9/logic.9 ../docs/man/man9/lowpass.9 ../docs/man/man9/lut5.9 ../docs/man/man9/maj3.9 ../docs/man/man9/match8.9 ../docs/man/man9/matrix_kb.9 ../docs/man/man9/max31855.9 ../docs/man/man9/maxkins.9 ../docs/man/man9/mesa_7i65.9 ../docs/man/man9/mesa_pktgyro_test.9 ../docs/man/man9/mesa_uart.9 ../docs/man/man9/message.9 ../docs/man/man9/millturn.9 ../docs/man/man9/minmax.9 ../docs/man/man9/motion.9 ../docs/man/man9/moveoff.9 ../docs/man/man9/mult2.9 ../docs/man/man9/multiclick.9 ../docs/man/man9/multiswitch.9 ../docs/man/man9/mux16.9 ../docs/man/man9/mux2.9 ../docs/man/man9/mux4.9 ../docs/man/man9/mux8.9 ../docs/man/man9/mux_generic.9 ../docs/man/man9/near.9 ../docs/man/man9/not.9 ../docs/man/man9/offset.9 ../docs/man/man9/ohmic.9 ../docs/man/man9/oneshot.9 ../docs/man/man9/opto_ac5.9 ../docs/man/man9/or2.9 ../docs/man/man9/orient.9 ../docs/man/man9/pentakins.9 ../docs/man/man9/pid.9 ../docs/man/man9/plasmac.9 ../docs/man/man9/pumakins.9 ../docs/man/man9/pwmgen.9 ../docs/man/man9/rosekins.9 ../docs/man/man9/rotatekins.9 ../docs/man/man9/sample_hold.9 ../docs/man/man9/sampler.9 ../docs/man/man9/scale.9 ../docs/man/man9/scaled_s32_sums.9 ../docs/man/man9/scarakins.9 ../docs/man/man9/select8.9 ../docs/man/man9/serport.9 ../docs/man/man9/setsserial.9 ../docs/man/man9/siggen.9 ../docs/man/man9/sim_axis_hardware.9 ../docs/man/man9/sim_encoder.9 ../docs/man/man9/sim_home_switch.9 ../docs/man/man9/sim_matrix_kb.9 ../docs/man/man9/sim_parport.9 ../docs/man/man9/sim_spindle.9 ../docs/man/man9/simple_tp.9 ../docs/man/man9/sphereprobe.9 ../docs/man/man9/spindle.9 ../docs/man/man9/spindle_monitor.9 ../docs/man/man9/sserial.9 ../docs/man/man9/stepgen.9 ../docs/man/man9/steptest.9 ../docs/man/man9/streamer.9 ../docs/man/man9/sum2.9 ../docs/man/man9/supply.9 ../docs/man/man9/thc.9 ../docs/man/man9/thcud.9 ../docs/man/man9/threads.9 ../docs/man/man9/threadtest.9 ../docs/man/man9/time.9 ../docs/man/man9/timedelay.9 ../docs/man/man9/timedelta.9 ../docs/man/man9/tof.9 ../docs/man/man9/toggle.9 ../docs/man/man9/toggle2nist.9 ../docs/man/man9/ton.9 ../docs/man/man9/tp.9 ../docs/man/man9/tpcomp.9 ../docs/man/man9/tripodkins.9 ../docs/man/man9/tristate_bit.9 ../docs/man/man9/tristate_float.9 ../docs/man/man9/trivkins.9 ../docs/man/man9/updown.9 ../docs/man/man9/userkins.9 ../docs/man/man9/watchdog.9 ../docs/man/man9/wcomp.9 ../docs/man/man9/weighted_sum.9 ../docs/man/man9/xhc_hb04_util.9 ../docs/man/man9/xor2.9 ../docs/man/man9/xyzab_tdr_kins.9 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 /usr/libexec/rpm-build/install -p -m 0644 objects/*.msg /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs /usr/libexec/rpm-build/install -p -m 0755 ../scripts/realtime /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halrun /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halcmd_twopass /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/haltcl /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/simulate_probe /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/sim_pin /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../*.png ../*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../lib/hallib/* /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -m 0644 ../tcl/*.png /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc # install all the sample configs, including subdirs (tar is required on debian systems, and common on others) /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs ((cd ../configs && tar --exclude CVS --exclude .cvsignore --exclude .gitignore -cf - .) | (cd /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs && tar -xf -)) /usr/libexec/rpm-build/install -p -m 0755 ../bin/inivar ../bin/halstreamer ../bin/halsampler ../bin/panelui ../bin/mb2hal ../bin/gs2_vfd ../bin/hy_gt_vfd ../bin/svd-ps_vfd ../bin/shuttle ../bin/xhc-hb04 ../bin/sendkeys ../bin/thermistor ../bin/vfs11_vfd ../bin/classicladder ../bin/halcmd ../bin/halrmt ../bin/halmeter ../bin/halscope ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../bin/vfdb_vfd ../bin/wj200_vfd ../bin/pi500_vfd ../bin/hy_vfd ../bin/xhc-whb04b-6 ../bin/linuxcncrsh ../bin/schedrmt ../bin/linuxcnclcd ../bin/halui ../bin/linuxcncsvr ../bin/milltask ../bin/io ../bin/iov2 ../bin/genserkins ../bin/rs274 ../bin/motion-logger ../bin/tool_mmap_read ../bin/tool_watch ../bin/tooledit ../bin/ngcgui ../bin/pyngcgui ../bin/gremlin_view ../bin/halshow /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_info /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/setup_designer /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_var /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/monitor-xhc-hb04 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-plot /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/moveoff_gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/hal-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/xhc-hb04-accels /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/pyvcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/gladevcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcncmkdesktop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/update_ini /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halreport /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/libnml.so.0 ../lib/liblinuxcnchal.so.0 ../lib/liblinuxcnc.a ../lib/librs274.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 /usr/src/tmp/linuxcnc-buildroot/usr/lib cp --no-dereference ../lib/liblinuxcnchal.so ../lib/liblinuxcncini.so ../lib/libnml.so ../lib/libposemath.so ../lib/libpyplugin.so ../lib/librs274.so ../lib/libtooldata.so /usr/src/tmp/linuxcnc-buildroot/usr/lib ldconfig /usr/src/tmp/linuxcnc-buildroot/usr/lib /bin/bash: line 1: ldconfig: command not found make: [Makefile:734: install-kernel-indep] Error 127 (ignored) /usr/libexec/rpm-build/install -p -m 0644 ../lib/linuxcnc/canterp.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../include/linuxcnc.h ../include/emcIniFile.hh ../include/iniaxis.hh ../include/inijoint.hh ../include/inispindle.hh ../include/initraj.hh ../include/inihal.hh ../include/cubic.h ../include/kinematics.h ../include/switchkins.h ../include/genhexkins.h ../include/genserkins.h ../include/pentakins.h ../include/pumakins.h ../include/tc.h ../include/tc_types.h ../include/tcq.h ../include/tp.h ../include/tp_types.h ../include/spherical_arc.h ../include/blendmath.h ../include/emcmotcfg.h ../include/motion.h ../include/homing.h ../include/simple_tp.h ../include/state_tag.h ../include/usrmotintf.h ../include/axis.h ../include/canon.hh ../include/canon_position.hh ../include/emctool.h ../include/emc.hh ../include/emc_nml.hh ../include/emccfg.h ../include/emcglb.h ../include/emcpos.h ../include/emcpose.h ../include/interp_return.hh ../include/interpl.hh ../include/motion_types.h ../include/debugflags.h ../include/interp_internal.hh ../include/interp_fwd.hh ../include/interp_base.hh ../include/modal_state.hh ../include/rs274ngc.hh ../include/saicanon.hh ../include/hal.h ../include/hal_parport.h ../include/hostmot2-serial.h ../include/locmem.hh ../include/memsem.hh ../include/phantom.hh ../include/physmem.hh ../include/recvn.h ../include/rem_msg.hh ../include/sendn.h ../include/shmem.hh ../include/tcpmem.hh ../include/cms.hh ../include/cms_aup.hh ../include/cms_cfg.hh ../include/cms_dup.hh ../include/cms_srv.hh ../include/cms_up.hh ../include/cms_user.hh ../include/cms_xup.hh ../include/cmsdiag.hh ../include/tcp_opts.hh ../include/tcp_srv.hh ../include/inifile.h ../include/inifile.hh ../include/linklist.hh ../include/cmd_msg.hh ../include/nml.hh ../include/nml_mod.hh ../include/nml_oi.hh ../include/nml_srv.hh ../include/nml_type.hh ../include/nmldiag.hh ../include/nmlmsg.hh ../include/stat_msg.hh ../include/_sem.h ../include/sem.hh ../include/_shm.h ../include/shm.hh ../include/_timer.h ../include/timer.hh ../include/posemath.h ../include/gotypes.h ../include/gomath.h ../include/sincos.h ../include/rcs.hh ../include/rcs_exit.hh ../include/rcs_print.hh ../include/rcsversion.h ../include/rtapi.h ../include/rtapi_app.h ../include/rtapi_atomic.h ../include/rtapi_bitops.h ../include/rtapi_bool.h ../include/rtapi_byteorder.h ../include/rtapi_device.h ../include/rtapi_firmware.h ../include/rtapi_gfp.h ../include/rtapi_io.h ../include/rtapi_limits.h ../include/rtapi_list.h ../include/rtapi_math.h ../include/rtapi_math_i386.h ../include/rtapi_math64.h ../include/rtapi_mutex.h ../include/rtapi_parport.h ../include/rtapi_pci.h ../include/rtapi_slab.h ../include/rtapi_stdint.h ../include/rtapi_ctype.h ../include/rtapi_errno.h ../include/rtapi_string.h ../include/rtapi_vsnprintf.h /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/ cp -dR ../nc_files/3D_Chips.html ../nc_files/3D_Chips.ngc ../nc_files/3D_Chips.pdf ../nc_files/3dtest.ngc ../nc_files/M101 ../nc_files/M102.c ../nc_files/arcspiral.ngc ../nc_files/b-index.ngc ../nc_files/cds.ngc ../nc_files/comp-g1.ngc ../nc_files/comp.ngc ../nc_files/comp311.ngc ../nc_files/comp311_2.ngc ../nc_files/cone.ngc ../nc_files/daisy.ngc ../nc_files/factorial.ngc ../nc_files/filtertest-gui.py ../nc_files/filtertest.py ../nc_files/flowsnake.ngc ../nc_files/flowsnake.py ../nc_files/g20sub.ngc ../nc_files/g76.ngc ../nc_files/g881.ngc ../nc_files/g881min.ngc ../nc_files/g882.ngc ../nc_files/gcmc_lib ../nc_files/gladevcp_lib ../nc_files/gmoccapy_2_tools_with_cutter_radius_compensation.ngc ../nc_files/gridprobe.ngc ../nc_files/hole-circle.ngc ../nc_files/holecircle.py ../nc_files/increment.ngc ../nc_files/involute.py ../nc_files/lathe-g76.ngc ../nc_files/lathe_g70_71_demo.ngc ../nc_files/lathe_g7x_face_boring.ngc ../nc_files/lathe_g7x_quadrants.ngc ../nc_files/lathe_pawn.ngc ../nc_files/lathecomp.ngc ../nc_files/m250.ngc ../nc_files/m61demo.ngc ../nc_files/m6demo.ngc ../nc_files/m6remap.ngc ../nc_files/m70m72-demo.ngc ../nc_files/m73-demo.ngc ../nc_files/m75.ngc ../nc_files/m76.ngc ../nc_files/macros ../nc_files/mmount.ngc ../nc_files/nestedcall.ngc ../nc_files/ngcgui_lib ../nc_files/offsets.ngc ../nc_files/orphans ../nc_files/plasmac ../nc_files/plasmatest.ngc ../nc_files/polar.ngc ../nc_files/probe ../nc_files/probe-hole.ngc ../nc_files/remap-subroutines ../nc_files/remap_lib ../nc_files/retval.ngc ../nc_files/roparams.ngc ../nc_files/skeleton.ngc ../nc_files/smartprobe.ngc ../nc_files/spiral.ngc ../nc_files/systems.ngc ../nc_files/testm6fail.ngc ../nc_files/threading.ngc ../nc_files/tool-length-probe.ngc ../nc_files/toplevel.ngc ../nc_files/tort.ngc ../nc_files/torus.png ../nc_files/touchoff.ngc ../nc_files/useful-subroutines.ngc ../nc_files/x-trim.ngc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0755 ../nc_files/M101 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0644 ../tcl/TkLinuxCNC /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/libexec/rpm-build/install -p -m 0644 Makefile.modinc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/linuxcnc.tcl ../tcl/ngcgui.tcl ../tcl/ngcgui_app.tcl ../tcl/ngcgui_ttt.tcl ../tcl/pkgIndex.tcl ../tcl/show_errors.tcl ../tcl/tklinuxcnc.tcl ../tcl/tooledit.tcl ../tcl/twopass.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/hal.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/linuxcnc.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/pkgIndex.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/bin/cbutton.tcl ../tcl/bin/emccalib.tcl ../tcl/bin/emcdebug.tcl ../tcl/bin/emctesting.tcl ../tcl/bin/emctuning.tcl ../tcl/bin/genedit.tcl ../tcl/bin/halconfig.tcl ../tcl/bin/halshow.tcl ../tcl/bin/pickconfig.tcl ../tcl/bin/tkbackplot.tcl ../tcl/bin/popimage /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin /usr/libexec/rpm-build/install -p -m 0644 ../tcl/scripts/balloon.tcl ../tcl/scripts/emchelp.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0755 ../tcl/scripts/Set_Coordinates.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/stepconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/touchy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen2.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/gmoccapy/gmoccapy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/pncconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gremlin_view.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/popupkeyboard.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc_big.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/hal_python.xml /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs/ /usr/libexec/rpm-build/install -p -m 0644 ../share/glade/pixmaps/hicolor/22x22/actions/widget*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions/ /usr/libexec/rpm-build/install -p -m 0644 ../share/gtksourceview-2.0/language-specs/*.lang /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs/ /usr/libexec/rpm-build/install -p -m 0644 ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ for d in ../share/applications/linuxcnc.desktop ../share/applications/linuxcnc-latency.desktop ../share/applications/linuxcnc-latency-histogram.desktop ../share/applications/linuxcnc-pncconf.desktop ../share/applications/linuxcnc-stepconf.desktop ; do \ /usr/libexec/rpm-build/install -p -m 0644 $d /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ ; \ done /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/README.adoc ../docs/INSTALL.adoc ../docs/AUTHORS /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/help/asciidoc-markup_es.adoc ../docs/help/rtfaults.adoc ../docs/help/rtfaults_es.adoc ../docs/help/tklinuxcnc.adoc /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/etc/axis_light_background /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/README /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/README.axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' + popd ~/RPM/BUILD/linuxcnc-2.9.2 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + cp debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + desktop-file-install --dir /usr/src/tmp/linuxcnc-buildroot/usr/share/applications --remove-key=Version --remove-category=X-CNC --remove-category=Utility /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc.desktop + cat + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps + convert linuxcncicon.png -resize 16x16 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps + convert linuxcncicon.png -resize 32x32 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps + convert linuxcncicon.png -resize 48x48 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps/linuxcncicon.png + pushd /usr/src/tmp/linuxcnc-buildroot/usr/share/man ~/tmp/linuxcnc-buildroot/usr/share/man ~/RPM/BUILD/linuxcnc-2.9.2 ++ find -name '*.?' + xz ./man9/xyzab_tdr_kins.9 ./man9/xor2.9 ./man9/xhc_hb04_util.9 ./man9/weighted_sum.9 ./man9/wcomp.9 ./man9/watchdog.9 ./man9/userkins.9 ./man9/updown.9 ./man9/trivkins.9 ./man9/tristate_float.9 ./man9/tristate_bit.9 ./man9/tripodkins.9 ./man9/tpcomp.9 ./man9/tp.9 ./man9/ton.9 ./man9/toggle2nist.9 ./man9/toggle.9 ./man9/tof.9 ./man9/timedelta.9 ./man9/timedelay.9 ./man9/time.9 ./man9/threadtest.9 ./man9/threads.9 ./man9/thcud.9 ./man9/thc.9 ./man9/supply.9 ./man9/sum2.9 ./man9/streamer.9 ./man9/steptest.9 ./man9/stepgen.9 ./man9/sserial.9 ./man9/spindle_monitor.9 ./man9/spindle.9 ./man9/sphereprobe.9 ./man9/simple_tp.9 ./man9/sim_spindle.9 ./man9/sim_parport.9 ./man9/sim_matrix_kb.9 ./man9/sim_home_switch.9 ./man9/sim_encoder.9 ./man9/sim_axis_hardware.9 ./man9/siggen.9 ./man9/setsserial.9 ./man9/serport.9 ./man9/select8.9 ./man9/scarakins.9 ./man9/scaled_s32_sums.9 ./man9/scale.9 ./man9/sampler.9 ./man9/sample_hold.9 ./man9/rotatekins.9 ./man9/rosekins.9 ./man9/pwmgen.9 ./man9/pumakins.9 ./man9/plasmac.9 ./man9/pid.9 ./man9/pentakins.9 ./man9/orient.9 ./man9/or2.9 ./man9/opto_ac5.9 ./man9/oneshot.9 ./man9/ohmic.9 ./man9/offset.9 ./man9/not.9 ./man9/near.9 ./man9/mux_generic.9 ./man9/mux8.9 ./man9/mux4.9 ./man9/mux2.9 ./man9/mux16.9 ./man9/multiswitch.9 ./man9/multiclick.9 ./man9/mult2.9 ./man9/moveoff.9 ./man9/motion.9 ./man9/minmax.9 ./man9/millturn.9 ./man9/message.9 ./man9/mesa_uart.9 ./man9/mesa_pktgyro_test.9 ./man9/mesa_7i65.9 ./man9/maxkins.9 ./man9/max31855.9 ./man9/matrix_kb.9 ./man9/match8.9 ./man9/maj3.9 ./man9/lut5.9 ./man9/lowpass.9 ./man9/logic.9 ./man9/lineardeltakins.9 ./man9/lincurve.9 ./man9/limit_axis.9 ./man9/limit3.9 ./man9/limit2.9 ./man9/limit1.9 ./man9/lcd.9 ./man9/latencybins.9 ./man9/knob2float.9 ./man9/kins.9 ./man9/joyhandle.9 ./man9/invert.9 ./man9/integ.9 ./man9/ilowpass.9 ./man9/hypot.9 ./man9/hostmot2.9 ./man9/homecomp.9 ./man9/hm2_spi.9 ./man9/hm2_rpspi.9 ./man9/hm2_pci.9 ./man9/hm2_eth.9 ./man9/hm2_7i90.9 ./man9/hm2_7i43.9 ./man9/histobins.9 ./man9/hal_parport.9 ./man9/hal_bb_gpio.9 ./man9/gray2bin.9 ./man9/gladevcp.9 ./man9/gentrivkins.9 ./man9/genserkins.9 ./man9/genhexkins.9 ./man9/gearchange.9 ./man9/gantrykins.9 ./man9/gantry.9 ./man9/flipflop.9 ./man9/filter_kalman.9 ./man9/feedcomp.9 ./man9/estop_latch.9 ./man9/eoffset_per_angle.9 ./man9/enum.9 ./man9/encoder_ratio.9 ./man9/encoder.9 ./man9/edge.9 ./man9/div2.9 ./man9/differential.9 ./man9/demux.9 ./man9/debounce.9 ./man9/deadzone.9 ./man9/ddt.9 ./man9/dbounce.9 ./man9/counter.9 ./man9/corexy_by_hal.9 ./man9/conv_u32_s32.9 ./man9/conv_u32_float.9 ./man9/conv_u32_bit.9 ./man9/conv_s32_u32.9 ./man9/conv_s32_float.9 ./man9/conv_s32_bit.9 ./man9/conv_float_u32.9 ./man9/conv_float_s32.9 ./man9/conv_bit_u32.9 ./man9/conv_bit_s32.9 ./man9/conv_bit_float.9 ./man9/constant.9 ./man9/comp.9 ./man9/classicladder.9 ./man9/clarkeinv.9 ./man9/clarke3.9 ./man9/clarke2.9 ./man9/charge_pump.9 ./man9/carousel.9 ./man9/blend.9 ./man9/bldc.9 ./man9/bitwise.9 ./man9/bitslice.9 ./man9/biquad.9 ./man9/bin2gray.9 ./man9/axistest.9 ./man9/axis.9 ./man9/at_pid.9 ./man9/anglejog.9 ./man9/and2.9 ./man9/abs_s32.9 ./man9/abs.9 ./man1/xyzbc-trt-gui.1 ./man1/xyzac-trt-gui.1 ./man1/xhc-whb04b-6.1 ./man1/xhc-hb04.1 ./man1/xhc-hb04-accels.1 ./man1/wj200_vfd.1 ./man1/vfs11_vfd.1 ./man1/vfdb_vfd.1 ./man1/update_ini.1 ./man1/touchy.1 ./man1/tooledit.1 ./man1/thermistor.1 ./man1/teach-in.1 ./man1/svd-ps_vfd.1 ./man1/stepconf.1 ./man1/simulate_probe.1 ./man1/sim_pin.1 ./man1/sim-torch.1 ./man1/shuttle.1 ./man1/sendkeys.1 ./man1/scorbot-er-3.1 ./man1/schedrmt.1 ./man1/scaragui.1 ./man1/rtapi_app.1 ./man1/rs274.1 ./man1/rotarydelta.1 ./man1/qtvcp.1 ./man1/qtplasmac-setup.1 ./man1/qtplasmac-plasmac2qt.1 ./man1/qtplasmac-materials.1 ./man1/qtplasmac-cfg2prefs.1 ./man1/pyvcp_demo.1 ./man1/pyvcp.1 ./man1/pyui.1 ./man1/pyngcgui.1 ./man1/pumagui.1 ./man1/puma560gui.1 ./man1/pncconf.1 ./man1/pmx485.1 ./man1/pmx485-test.1 ./man1/pi500_vfd.1 ./man1/panelui.1 ./man1/ngcgui.1 ./man1/mqtt-publisher.1 ./man1/moveoff_gui.1 ./man1/motion-logger.1 ./man1/monitor-xhc-hb04.1 ./man1/mitsub_vfd.1 ./man1/milltask.1 ./man1/mdro.1 ./man1/mdi.1 ./man1/mb2hal.1 ./man1/max5gui.1 ./man1/maho600gui.1 ./man1/linuxcnctop.1 ./man1/linuxcncsvr.1 ./man1/linuxcncrsh.1 ./man1/linuxcncmkdesktop.1 ./man1/linuxcnclcd.1 ./man1/linuxcnc_var.1 ./man1/linuxcnc_module_helper.1 ./man1/linuxcnc_info.1 ./man1/linuxcnc.1 ./man1/lineardelta.1 ./man1/latency-test.1 ./man1/latency-plot.1 ./man1/latency-histogram.1 ./man1/iov2.1 ./man1/iocontrol.1 ./man1/io.1 ./man1/inivar.1 ./man1/image-to-gcode.1 ./man1/hy_vfd.1 ./man1/hy_gt_vfd.1 ./man1/hexagui.1 ./man1/hbmgui.1 ./man1/halui.1 ./man1/haltcl.1 ./man1/halstreamer.1 ./man1/halshow.1 ./man1/halscope.1 ./man1/halsampler.1 ./man1/halrun.1 ./man1/halrmt.1 ./man1/halreport.1 ./man1/halmeter.1 ./man1/halcompile.1 ./man1/halcmd_twopass.1 ./man1/halcmd.1 ./man1/hal_manualtoolchange.1 ./man1/hal_input.1 ./man1/hal-histogram.1 ./man1/gscreen.1 ./man1/gs2_vfd.1 ./man1/gremlin_view.1 ./man1/gmoccapy.1 ./man1/gladevcp_demo.1 ./man1/gladevcp.1 ./man1/emccalib.1 ./man1/elbpcom.1 ./man1/debuglevel.1 ./man1/axis.1 ./man1/axis-remote.1 ./man1/5axisgui.1 + popd ~/RPM/BUILD/linuxcnc-2.9.2 + rm /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnc.a + /usr/lib/rpm/find-lang linuxcnc gmoccapy --output=linuxcnc.lang + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/linuxcnc-buildroot (auto) mode of './usr/bin/rtapi_app' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) mode of './usr/bin/linuxcnc_module_helper' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) Verifying and fixing files in /usr/src/tmp/linuxcnc-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) Checking contents of files in /usr/src/tmp/linuxcnc-buildroot/ (default) Compressing files in /usr/src/tmp/linuxcnc-buildroot (auto) removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' Adjusting library links in /usr/src/tmp/linuxcnc-buildroot ./lib: (from :0) ./usr/lib: (from :0) liblinuxcncini.so.0 -> liblinuxcncini.so.0 libposemath.so.0 -> libposemath.so.0 libnml.so.0 -> libnml.so.0 liblinuxcnchal.so.0 -> liblinuxcnchal.so.0 librs274.so.0 -> librs274.so.0 libpyplugin.so.0 -> libpyplugin.so.0 libtooldata.so.0 -> libtooldata.so.0 ./usr/lib/python3/site-packages/qtvcp/lib: (from :0) Verifying ELF objects in /usr/src/tmp/linuxcnc-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=relaxed) verify-elf: WARNING: ./usr/bin/motion-logger: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/rs274: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/milltask: uses non-LFS functions: fopen freopen stat verify-elf: WARNING: ./usr/bin/linuxcnclcd: uses non-LFS functions: fcntl lstat readdir verify-elf: WARNING: ./usr/bin/hy_vfd: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/vfdb_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halscope: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halrmt: uses non-LFS functions: fcntl fopen stat verify-elf: WARNING: ./usr/bin/halcmd: uses non-LFS functions: fcntl fopen readdir verify-elf: WARNING: ./usr/bin/classicladder: uses non-LFS functions: fcntl fopen open readdir verify-elf: WARNING: ./usr/bin/vfs11_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/sendkeys: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/xhc-hb04: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/shuttle: uses non-LFS functions: glob open verify-elf: WARNING: ./usr/bin/mb2hal: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halsampler: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/halstreamer: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/rtapi_app: uses non-LFS functions: __open_2 fopen mmap open setrlimit stat verify-elf: WARNING: ./usr/bin/linuxcnc_module_helper: uses non-LFS functions: readdir verify-elf: WARNING: ./usr/lib/libtooldata.so.0: uses non-LFS functions: fopen lseek mmap open verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_XOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_BOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_UOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_PROBE_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_MOTION_CONTROL_MODEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_SPEEDi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_BLOCK_DELETEb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16GET_BLOCK_DELETEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14IO_PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SPINDLE_RETRACTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_PLANEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10NURBS_FEEDiSt6vectorI13CONTROL_POINTSaIS0_EEj verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21GET_EXTERNAL_TC_FAULTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10UPDATE_TAG8StateTag verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15RELOAD_TOOLDATAv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23CLEAR_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10CLAMP_AXIS10CANON_AXIS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11LOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_PARAMETER_FILE_NAMEPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z4WAITiiid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_VOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12START_CHANGEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_COFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_TRAVERSE_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25SET_OPTIONAL_PROGRAM_STOPb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17GET_EXTERNAL_MISTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24SPINDLE_RETRACT_TRAVERSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z3LOGPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_ANALOG_INPUTid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z27GET_EXTERNAL_OFFSET_APPLIEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_FEED_HOLD_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PARAMETER_FILE_NAMEPci verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_OFFSETSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22SET_NAIVECAM_TOLERANCEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_LENGTH_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9RIGID_TAPidddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31STOP_CUTTER_RADIUS_COMPENSATIONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8LOGCLOSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_MODEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_FEED_OVERRIDE_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20CLEAR_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_AXIS_MASKv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13UNLOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G5X_OFFSETiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z6FINISHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_FEED_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_FLOODv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ON_RESETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_TRAVERSE_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G92_OFFSETddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31GET_EXTERNAL_SELECTED_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_DIGITAL_INPUTii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_SPINDLE_MODEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SET_XY_ROTATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7LOGOPENPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_ANGLE_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z46GET_EXTERNAL_MOTION_CONTROL_NAIVECAM_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_SPINDLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z36GET_EXTERNAL_SPINDLE_OVERRIDE_ENABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32START_CUTTER_RADIUS_COMPENSATIONi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_YOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30SET_CUTTER_RADIUS_COMPENSATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_WOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9LOGAPPENDPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17DISABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: USER_DEFINED_FUNCTION verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _task verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_AUX_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_AOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_QUEUE_EMPTYv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PROBE_TRIPPED_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: builtin_modules verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18CHANGE_TOOL_NUMBERi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_TOOL_TABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22USE_TOOL_LENGTH_OFFSET7EmcPose verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_ZOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21SET_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16ENABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_TOOL_TABLE_ENTRYii7EmcPosedddi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z37GET_EXTERNAL_MOTION_CONTROL_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_ADAPTIVE_FEED_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20USE_NO_SPINDLE_FORCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CANON_ERRORPKcz verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z28WAIT_SPINDLE_ORIENT_COMPLETEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TC_REASONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_LENGTH_UNIT_TYPEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/liblinuxcnchal.so.0: uses non-LFS functions: fopen stat verify-elf: WARNING: ./usr/lib/libnml.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/liblinuxcncini.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXDestroyContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryServerString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDeleteLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDrawBuffer verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryExtension verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXMakeCurrent verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glFlush verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGetString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXCreateContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXUseXFont verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGenLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXChooseVisual verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXGetConfig verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glViewport verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXSwapBuffers verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/linuxcnc.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/hal.so: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_destroy verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hm2_get_sserial verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_shmem_base verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_del_funct_from_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_detach verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_writable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_write verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_maxdepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitch verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_stop_threads verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpRunCycle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_allhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetMotionType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetCycleTime verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetTermCond verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsForward verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_index_enable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetRunDir verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: write_homing_out_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_sequence verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpActiveDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotData verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetSpindleSync verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_synchronized verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_cancel_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsInverse verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitchable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecTag verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_needs_unlock_first verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_is_active verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVlimit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddCircle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetDout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpIsDone verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpPause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpCreate verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddRigidTap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpResume verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homeMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_unhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tcqFull verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_idle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAbort verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_home_joint verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: read_homing_in_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpQueueDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddLine verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_at_index_search_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homing_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpClear verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_get_pktuart verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_tram_add_bspi_frame verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_allocate_bspi_tram verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_clear_fifo verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_setup_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_write_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_set_read_function verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_free verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_alias verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: uses non-LFS functions: open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: uses non-LFS functions: fopen mmap stat verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_task_self verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: uses non-LFS functions: fopen mmap open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_next_lower verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_vsnprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_pause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_start verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_clock_set_period verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_highest verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: uses non-LFS functions: mmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print Splitting links to aliased files under /{,s}bin in /usr/src/tmp/linuxcnc-buildroot Bytecompiling python3 modules in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py Bytecompiling python3 modules with optimization in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -O /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Bytecompiling python3 modules with optimization-2 in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -OO /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py Hardlinking identical .pyc and .opt-?.pyc files './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/glnav.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/glnav.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hal.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/vismach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vismach.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' Processing files: linuxcnc-2.9.2-alt3.20240203 warning: File listed twice: /usr/lib/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/canterp.so warning: File listed twice: /usr/lib/linuxcnc/modules warning: File listed twice: /usr/lib/linuxcnc/modules/5axiskins.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/and2.so warning: File listed twice: /usr/lib/linuxcnc/modules/anglejog.so warning: File listed twice: /usr/lib/linuxcnc/modules/axistest.so warning: File listed twice: /usr/lib/linuxcnc/modules/bin2gray.so warning: File listed twice: /usr/lib/linuxcnc/modules/biquad.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitslice.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitwise.so warning: File listed twice: /usr/lib/linuxcnc/modules/bldc.so warning: File listed twice: /usr/lib/linuxcnc/modules/blend.so warning: File listed twice: /usr/lib/linuxcnc/modules/boss_plc.so warning: File listed twice: /usr/lib/linuxcnc/modules/carousel.so warning: File listed twice: /usr/lib/linuxcnc/modules/charge_pump.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke2.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke3.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarkeinv.so warning: File listed twice: /usr/lib/linuxcnc/modules/classicladder_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/comp.so warning: File listed twice: /usr/lib/linuxcnc/modules/constant.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexy_by_hal.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexykins.so warning: File listed twice: /usr/lib/linuxcnc/modules/counter.so warning: File listed twice: /usr/lib/linuxcnc/modules/dbounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/ddt.so warning: File listed twice: /usr/lib/linuxcnc/modules/deadzone.so warning: File listed twice: /usr/lib/linuxcnc/modules/debounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/demux.so warning: File listed twice: /usr/lib/linuxcnc/modules/differential.so warning: File listed twice: /usr/lib/linuxcnc/modules/div2.so warning: File listed twice: /usr/lib/linuxcnc/modules/edge.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder_ratio.so warning: File listed twice: /usr/lib/linuxcnc/modules/enum.so warning: File listed twice: /usr/lib/linuxcnc/modules/eoffset_per_angle.so warning: File listed twice: /usr/lib/linuxcnc/modules/estop_latch.so warning: File listed twice: /usr/lib/linuxcnc/modules/feedcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/filter_kalman.so warning: File listed twice: /usr/lib/linuxcnc/modules/flipflop.so warning: File listed twice: /usr/lib/linuxcnc/modules/gantry.so warning: File listed twice: /usr/lib/linuxcnc/modules/gearchange.so warning: File listed twice: /usr/lib/linuxcnc/modules/genhexkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/genserkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/gray2bin.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_bb_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_gm.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_lib.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_pi_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_ppmc.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_speaker.so warning: File listed twice: /usr/lib/linuxcnc/modules/histobins.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i43.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i90.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_eth.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_pci.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_rpspi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_spi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/homecomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/homemod.so warning: File listed twice: /usr/lib/linuxcnc/modules/hostmot2.so warning: File listed twice: /usr/lib/linuxcnc/modules/hypot.so warning: File listed twice: /usr/lib/linuxcnc/modules/ilowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/integ.so warning: File listed twice: /usr/lib/linuxcnc/modules/invert.so warning: File listed twice: /usr/lib/linuxcnc/modules/joyhandle.so warning: File listed twice: /usr/lib/linuxcnc/modules/knob2float.so warning: File listed twice: /usr/lib/linuxcnc/modules/latencybins.so warning: File listed twice: /usr/lib/linuxcnc/modules/lcd.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit1.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit2.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit3.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit_axis.so warning: File listed twice: /usr/lib/linuxcnc/modules/lincurve.so warning: File listed twice: /usr/lib/linuxcnc/modules/lineardeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/modules/logic.so warning: File listed twice: /usr/lib/linuxcnc/modules/lowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/lut5.so warning: File listed twice: /usr/lib/linuxcnc/modules/maj3.so warning: File listed twice: /usr/lib/linuxcnc/modules/match8.so warning: File listed twice: /usr/lib/linuxcnc/modules/matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/max31855.so warning: File listed twice: /usr/lib/linuxcnc/modules/maxkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_7i65.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_uart.so warning: File listed twice: /usr/lib/linuxcnc/modules/message.so warning: File listed twice: /usr/lib/linuxcnc/modules/millturn.so warning: File listed twice: /usr/lib/linuxcnc/modules/minmax.so warning: File listed twice: /usr/lib/linuxcnc/modules/modmath.so warning: File listed twice: /usr/lib/linuxcnc/modules/motmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/moveoff.so warning: File listed twice: /usr/lib/linuxcnc/modules/mult2.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiclick.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiswitch.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux16.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux2.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux4.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux8.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux_generic.so warning: File listed twice: /usr/lib/linuxcnc/modules/near.so warning: File listed twice: /usr/lib/linuxcnc/modules/not.so warning: File listed twice: /usr/lib/linuxcnc/modules/offset.so warning: File listed twice: /usr/lib/linuxcnc/modules/ohmic.so warning: File listed twice: /usr/lib/linuxcnc/modules/oneshot.so warning: File listed twice: /usr/lib/linuxcnc/modules/or2.so warning: File listed twice: /usr/lib/linuxcnc/modules/orient.so warning: File listed twice: /usr/lib/linuxcnc/modules/pentakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pid.so warning: File listed twice: /usr/lib/linuxcnc/modules/plasmac.so warning: File listed twice: /usr/lib/linuxcnc/modules/pumakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pwmgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/rosekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotarydeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotatekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/sample_hold.so warning: File listed twice: /usr/lib/linuxcnc/modules/sampler.so warning: File listed twice: /usr/lib/linuxcnc/modules/scale.so warning: File listed twice: /usr/lib/linuxcnc/modules/scaled_s32_sums.so warning: File listed twice: /usr/lib/linuxcnc/modules/scarakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/scope_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/scorbot-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/select8.so warning: File listed twice: /usr/lib/linuxcnc/modules/serport.so warning: File listed twice: /usr/lib/linuxcnc/modules/setsserial.so warning: File listed twice: /usr/lib/linuxcnc/modules/siggen.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_axis_hardware.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_home_switch.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/simple_tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/sphereprobe.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle_monitor.so warning: File listed twice: /usr/lib/linuxcnc/modules/stepgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/steptest.so warning: File listed twice: /usr/lib/linuxcnc/modules/streamer.so warning: File listed twice: /usr/lib/linuxcnc/modules/sum2.so warning: File listed twice: /usr/lib/linuxcnc/modules/supply.so warning: File listed twice: /usr/lib/linuxcnc/modules/thc.so warning: File listed twice: /usr/lib/linuxcnc/modules/thcud.so warning: File listed twice: /usr/lib/linuxcnc/modules/threads.so warning: File listed twice: /usr/lib/linuxcnc/modules/threadtest.so warning: File listed twice: /usr/lib/linuxcnc/modules/time.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelay.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelta.so warning: File listed twice: /usr/lib/linuxcnc/modules/tof.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle2nist.so warning: File listed twice: /usr/lib/linuxcnc/modules/ton.so warning: File listed twice: /usr/lib/linuxcnc/modules/tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/tpmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/tripodkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/trivkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/updown.so warning: File listed twice: /usr/lib/linuxcnc/modules/userkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/watchdog.so warning: File listed twice: /usr/lib/linuxcnc/modules/wcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/weighted_sum.so warning: File listed twice: /usr/lib/linuxcnc/modules/xhc_hb04_util.so warning: File listed twice: /usr/lib/linuxcnc/modules/xor2.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/realtime Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.SNnGKN find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py provides python3(involute)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py provides python3(holecircle)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py provides python3(flowsnake)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py provides python3(filtertest)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py provides python3(screens.x1mill.x1mill_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py provides python3(screens.woodpecker.woodpecker_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py provides python3(screens.tester.tester_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py provides python3(screens.qttouchy.qttouchy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py provides python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py provides python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py provides python3(screens.qtplasmac.qtplasmac_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py provides python3(screens.qtplasmac.languages.qtplasmac)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py provides python3(screens.qtlathe.qtlathe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py provides python3(screens.qtdragon_hd.qtdragon_hd_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py provides python3(screens.qtdragon.qtdragon_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py provides python3(screens.qtaxis.qtaxis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py provides python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py provides python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py provides python3(screens.qt_cnc.qt_cnc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py provides python3(screens.blender.blender_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py provides python3(panels.vismach_scara.vismach_scara_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py provides python3(panels.vismach_router_atc.vismach_router_atc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py provides python3(panels.vismach_millturn.vismach_millturn_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py provides python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py provides python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py provides python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py provides python3(panels.versaprobe.versaprobe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py provides python3(panels.tool_dialog.tool_dialog_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py provides python3(panels.test_probe.test_probe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py provides python3(panels.test_panel.test_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py provides python3(panels.test_led.test_led_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py provides python3(panels.test_dial.test_dial_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py provides python3(panels.test_button.test_button_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py provides python3(panels.spindle_belts.spindle_belts_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py provides python3(panels.sim_panel.sim_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py provides python3(panels.qtplasmac_sim.qtplasmac_sim_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py provides python3(panels.copy.copy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py provides python3(panels.cam_align.cam_align_handler)(under non-std path /usr/share/qtvcp) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.SORUCz find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gcode.so: underlinked libraries: /usr/lib/libpython3.12.so.1.0 lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/linuxcnc.so: underlinked libraries: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0 python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so :550: SyntaxWarning: invalid escape sequence '\.' :552: SyntaxWarning: invalid escape sequence '\.' :289: SyntaxWarning: invalid escape sequence '\ ' :295: SyntaxWarning: invalid escape sequence '\ ' :299: SyntaxWarning: invalid escape sequence '\ ' :303: SyntaxWarning: invalid escape sequence '\ ' :306: SyntaxWarning: invalid escape sequence '\ ' :310: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :320: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\P' :446: SyntaxWarning: invalid escape sequence '\M' :17: SyntaxWarning: invalid escape sequence '\s' :181: SyntaxWarning: invalid escape sequence '\s' :193: SyntaxWarning: invalid escape sequence '\[' :199: SyntaxWarning: invalid escape sequence '\[' :218: SyntaxWarning: invalid escape sequence '\[' :236: SyntaxWarning: invalid escape sequence '\[' :267: SyntaxWarning: invalid escape sequence '\w' :270: SyntaxWarning: invalid escape sequence '\w' :274: SyntaxWarning: invalid escape sequence '\w' :289: SyntaxWarning: invalid escape sequence '\d' :301: SyntaxWarning: invalid escape sequence '\[' :309: SyntaxWarning: invalid escape sequence '\s' :341: SyntaxWarning: invalid escape sequence '\[' :342: SyntaxWarning: invalid escape sequence '\[' :388: SyntaxWarning: invalid escape sequence '\[' :390: SyntaxWarning: invalid escape sequence '\[' :394: SyntaxWarning: invalid escape sequence '\[' :395: SyntaxWarning: invalid escape sequence '\[' :396: SyntaxWarning: invalid escape sequence '\.' :398: SyntaxWarning: invalid escape sequence '\[' :487: SyntaxWarning: invalid escape sequence '\[' :498: SyntaxWarning: invalid escape sequence '\s' :769: SyntaxWarning: invalid escape sequence '\d' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\P' :319: SyntaxWarning: invalid escape sequence '\M' :2207: SyntaxWarning: invalid escape sequence '\(' :2208: SyntaxWarning: invalid escape sequence '\(' :2209: SyntaxWarning: invalid escape sequence '\(' :170: SyntaxWarning: invalid escape sequence '\d' :171: SyntaxWarning: invalid escape sequence '\d' :174: SyntaxWarning: invalid escape sequence '\d' :175: SyntaxWarning: invalid escape sequence '\d' :176: SyntaxWarning: invalid escape sequence '\d' :178: SyntaxWarning: invalid escape sequence '\d' :181: SyntaxWarning: invalid escape sequence '\d' :154: SyntaxWarning: invalid escape sequence '\d' :6109: SyntaxWarning: invalid escape sequence '\[' :49: SyntaxWarning: invalid escape sequence '\d' :51: SyntaxWarning: invalid escape sequence '\d' :57: SyntaxWarning: invalid escape sequence '\d' :59: SyntaxWarning: invalid escape sequence '\d' :30: SyntaxWarning: invalid escape sequence '\.' :32: SyntaxWarning: invalid escape sequence '\.' py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "atexit" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "errno" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "_thread" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "gcode" lines:[59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.OpenGLTk" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.interpret" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hershey" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "propertywindow" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.options" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "nf" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "bwidget" lines:[69] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "linuxcnc" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "glnav" lines:[72] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hal" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "subprocess" lines:[[1113], [[3962]], [4034]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "webbrowser" lines:[[[2089]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "vcpparse" lines:[[[3926]], [[[4049]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "_thread" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "linuxcnc" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "time" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "rs274.options" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: skipping "sys" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "hal" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.makepins" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.gladebuilder" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.core" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal_glib" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "sys" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "atexit" lines:[42] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "linuxcnc" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "time" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "qtvcp" lines:[[5801]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.makepins" lines:[[5823]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.combi_dro" lines:[[5824]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gmoccapy" lines:[[5825, 5826, 5827, 5828, 5829, 5830], [[5832]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gremlin_view: "gremlin_view" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "qtvcp" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal" lines:[92] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "errno" lines:[93] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gladevcp.makepins" lines:[94] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "atexit" lines:[96] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "time" lines:[97, 98] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal_glib" lines:[99] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "linuxcnc" lines:[197] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gscreen" lines:[198, 199, 200, 201] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gi.repository" lines:[[119], [131], [141]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "distro" lines:[[[165]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "inspect" lines:[[[889]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "collections" lines:[[[890]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "subprocess" lines:[[[3941]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "linux_event" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "hal" lines:[22, 28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "nf" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "rs274.options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "sys" lines:[22, 402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "time" lines:[402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "hal" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: skipping "sys" lines:[12] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.author" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.options" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "PIL" lines:[[29], [[502]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "Image" lines:[[[31]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter" lines:[[499], [[757]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "pickle" lines:[[506]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "nf" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "ImageTk" lines:[[[[504]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter.filedialog" lines:[[[758]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "vismach" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "lineardeltakins" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "linuxcnc" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "rs274.options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "tkinter" lines:[[122]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "_tkinter" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "vismach" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "hal" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "getopt" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "sys" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/modcompile: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "time" lines:[31] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "hal" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "linuxcnc" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "paho.mqtt.client" lines:[[[[53]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "optparse" lines:[[[118]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "time" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial.tools.list_ports" lines:[[32]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "errno" lines:[38] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "copy" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "multifilebuilder" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "touchy" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "pncconf" lines:[54, 55, 56, 57, 58, 59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "hal" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "vismach" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "hal" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyngcgui: "pyngcgui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyui: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: skipping "sys" lines:[37] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "vcpparse" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "hal" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: "json" lines:[[[[[[336]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "tkinter" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtCore" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtGui" lines:[[39]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtWidgets" lines:[[40]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebEngineWidgets" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebKitWidgets" lines:[[[[18]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp" lines:[[[117]], [533]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "linuxcnc" lines:[[[[152]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.lib" lines:[[[[[329]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.core" lines:[[[450]], [553]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "rotarydeltakins" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: skipping "sys" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "vismach" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: "hal" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "hal" lines:[35, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "errno" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "time" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "multifilebuilder" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "stepconf" lines:[116, 117, 118] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "defusedexpat" lines:[[47]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "xml.parsers" lines:[[[49]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "sys" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "atexit" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "time" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "linuxcnc" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "touchy" lines:[62, 63, 64, 65, 66, 67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "subprocess" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "datetime" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "vismach" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "hal" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "linuxcnc" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "scipy.interpolate" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py: "sys" lines:[[112]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py: skipping "sys" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "gladevcp.hal_pythonplugin" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "importlib" lines:[[4]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "linuxcnc" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "hal_glib" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "gladevcp.gtk_action" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "linuxcnc" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "qtvcp" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "hal" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "gladevcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "sys" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "time" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "atexit" lines:[829] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "subprocess" lines:[[[601], [617]], [[838]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp.core" lines:[[915]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.core" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "gladevcp.hal_widgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "gladevcp.hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "atexit" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_actions" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "subprocess" lines:[[[37]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "hal_widgets" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "linuxcnc" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gremlin" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "rs274.glcanon" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gcode" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_glib" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_actions" lines:[[41]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gladevcp.hal_actions" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "subprocess" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gremlin_view" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gladevcp" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "hal_widgets" lines:[[46]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "gladevcp.hal_widgets" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_glib" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.core" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_actions" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_actions" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "gladevcp.hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "pyngcgui" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "gladevcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_widgets" lines:[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.status_label" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.state_label" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.led" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.calculatorwidget" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.tooledit_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.drowidget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.iconview" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.combi_dro" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetwidget" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetpage_widget" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_bar" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_meter" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_graph" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_lightbutton" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.overridewidget" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.jogwheel" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.speedcontrol" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_dial" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_actions" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_filechooser" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_sourceview" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_mdihistory" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.macro_widget" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_pyngcgui" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin_plus" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "linuxcnc" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "hal_glib" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_widgets" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_actions" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_filechooser" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "os" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "tempfile" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py: "hal" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py: "qtvcp" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "gladevcp.hal_widgets" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "hal_widgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "gladevcp.hal_widgets" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_actions" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_actions" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.gladebuilder" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.hal_widgets" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.led" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "hal_glib" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.gladebuilder" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_widgets" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_actions" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "gladevcp.hal_widgets" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_widgets" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "gladevcp.hal_widgets" lines:[[26]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_widgets" lines:[[23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "gladevcp.hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib" lines:[[16], [73]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.xobject" lines:[[17], [74]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.protocol" lines:[[72]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py: "gladevcp.makepins" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "itertools" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi" lines:[[9]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi.repository" lines:[[12, 13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "cairo" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py: "gladevcp" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "qtvcp" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "gmoccapy" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "icon_theme_helper" lines:[[[40]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "gi.repository" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "sys" lines:[46] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "glnav" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.interpret" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "linuxcnc" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "gcode" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "time" lines:[68] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "_thread" lines:[74] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib.display" lines:[[56]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "sys" lines:[80] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "gladevcp.hal_actions" lines:[81] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "linuxcnc" lines:[82] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "time" lines:[83] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "glib" lines:[87] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "getopt" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py: "_hal" lines:[30, 31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "_hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "sys" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "time" lines:[8] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: "configparser" lines:[[[1960]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: "linuxcnc" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: skipping "sys" lines:[57] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: skipping "sys" lines:[62] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "linuxcnc" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "hal" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp" lines:[74] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp.hal_filechooser" lines:[[212]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gi.repository.GdkPixbuf" lines:[[456]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[[[[2987]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "glib" lines:[[[[2988]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "hal" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[[[35]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "zmq" lines:[[[[[[94]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "sys" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "hal" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "bwidget" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "time" lines:[55] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "vcpparse" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.dom.minidom" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.parsers.expat" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "rs274.options" lines:[[[1745]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "_thread" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "glnav" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "rs274" lines:[31, 32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "gcode" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp.widgets.fake_status" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "PyQt5.QtOpenGL" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "OpenGL" lines:[[22, 23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_pstat" lines:[288] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_action" lines:[302] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_tstat" lines:[318] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp.core" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi" lines:[[31], [279]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi.repository" lines:[[33], [280]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "espeak" lines:[[54]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "queue" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "distro" lines:[[[[98]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: skipping "time" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/colored_formatter.py: "logging" lines:[[116]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "atexit" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "linuxcnc" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "atexit" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "linuxcnc" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "atexit" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.qt_makegui" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.lib" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp.core" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "hal" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "sys" lines:[[189]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "PyQt5.QtCore" lines:[[190]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.lib" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "gladevcp.hal_filechooser" lines:[[879]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "popplerqt5" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/mill_xyz.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: skipping "itertools" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi.repository" lines:[[13, 14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "cairo" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: "qtvcp.lib.qt_vismach.primitives" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: skipping "plasmac" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.lib.qtplasmac" lines:[29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py: "cv2" lines:[[[270]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: skipping "sys" lines:[97] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter" lines:[[101]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.filedialog" lines:[[102]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.messagebox" lines:[[103]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "Tkinter" lines:[[105]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFileDialog" lines:[[106]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkMessageBox" lines:[[107]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "psyco" lines:[[114]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFont" lines:[[[6408]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.font" lines:[[[[6411]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "dbus.mainloop.pyqt5" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "sys" lines:[[255]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "PyQt5.QtCore" lines:[[256]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.qt_makegui" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.lib.aux_program_loader" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "qtvcp" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "hal_glib" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py: skipping "time" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.lib.writer.ext" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib" lines:[[[26]], [51]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.xobject" lines:[[[27]], [52]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.protocol" lines:[[50]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "qtvcp.lib.colored_formatter" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button_round" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.richtext_selector" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.basic_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.camview_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.container_widgets" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.detach_tabs" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.gcode_graphics" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.hal_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.jog_increments" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.joypad" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.led_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.nurbs_editor" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.overlay_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.simplewidgets_plugin" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.led_plugin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.hal_label_plugin" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.detach_tabs_plugin" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_progress_bar_plugin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.joypad_plugin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.nurbs_editor_plugin" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.web_widget_plugin" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.container_plugin" lines:[37, 38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.graphics_plugin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.widgets_plugin" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_led_plugin" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_label_plugin" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_label_plugin" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.actionbutton_plugin" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.dialog_plugin" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.overlay_plugin" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_slider_plugin" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_adjustment_bar_plugin" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.screenoptions_plugin" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.jogincrements_plugin" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.camview_plugin" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.toolbutton_plugin" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.versa_probe_plugin" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.basic_probe_plugin" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.tab_widget_plugin" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.virtualkeyboard_plugin" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_gauge_plugin" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.bar_plugin" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.round_gauge" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.round_progress" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.screen_options" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.simple_widgets" lines:[5, 6, 7, 8, 9, 10, 11, 12, 13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_output" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_input" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.xembed" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.radio_axis_selector" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.axis_tool_button" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.offset_tool_button" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.file_manager" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.image_switcher" lines:[21, 22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.machine_log" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.state_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.state_led" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.adjustment_bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.richtext_selector" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.status_label" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.status_slider" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.tab_widget" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.system_tool_button" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.action_tool_button" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.versa_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.virtualkeyboard" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.web_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.dro_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_line" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_history" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_touchy" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.gcode_editor" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.geditor" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.status_stacked" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.widget_switcher" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.origin_offsetview" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.tool_offsetview" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.macro_widget" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "linuxcnc" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "sys" lines:[1057] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "atexit" lines:[1058] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "subprocess" lines:[[[650], [666]], [[1067]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[[1147]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "importlib" lines:[[[[[190]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "resources" lines:[[[[[[191]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.screen_options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "importlib" lines:[[[432]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "qtvcp" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.simple_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.lib.aux_program_loader" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "sys" lines:[[1580]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "PyQt5.QtWidgets" lines:[[1581]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "qtvcp.widgets.action_button" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "sys" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "PyQt5.QtWidgets" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "sys" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "PyQt5.QtWidgets" lines:[[83]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.lib.aux_program_loader" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "sys" lines:[[390]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "PyQt5.QtWidgets" lines:[[391]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "hal" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "sys" lines:[[292]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "PyQt5.QtWidgets" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp.widgets.widget_baseclass" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "hal" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "PyQt5.QtCore" lines:[[7], [[10]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.dialogMixin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtWidgets" lines:[[459]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtCore" lines:[[460]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtGui" lines:[[461]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "qtvcp.core" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "sys" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: skipping "_thread" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.widgets.widget_baseclass" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.core" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "cv2" lines:[[45]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "sys" lines:[[572]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py: "sys" lines:[[359]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp.widgets.widget_baseclass" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.widget_baseclass" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.origin_offsetview" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.tool_offsetview" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.macro_widget" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.versa_probe" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.entry_widget" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.virtualkeyboard" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.calculator" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.machine_log" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.lib.notify" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.dialogMixin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.camview_widget" lines:[[[984]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "sys" lines:[[1925]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "PyQt5.QtWidgets" lines:[[1926]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "sys" lines:[[326]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "PyQt5.QtWidgets" lines:[[327]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "sys" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "PyQt5.QtWidgets" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.widgets.widget_baseclass" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "sys" lines:[[556]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.widgets.widget_baseclass" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.core" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.Qsci" lines:[[58]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtWidgets" lines:[[1137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtCore" lines:[[1138]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtGui" lines:[[1139]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qt5_graphics" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.widgets.widget_baseclass" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.core" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "sys" lines:[[511]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "PyQt5.QtWidgets" lines:[[512]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.gcode_editor" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.widget_baseclass" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtWidgets" lines:[[523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtCore" lines:[[524]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtGui" lines:[[525]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.widget_baseclass" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "sys" lines:[[216]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "PyQt5.QtWidgets" lines:[[217]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "sys" lines:[[375]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "PyQt5.QtWidgets" lines:[[376]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "sys" lines:[[195]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "qtvcp.widgets.widget_baseclass" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtCore" lines:[[22], [[25]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "sys" lines:[[655]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtWidgets" lines:[[656]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "sys" lines:[[242]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "PyQt5.QtWidgets" lines:[[243]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "sys" lines:[[133]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "PyQt5.QtWidgets" lines:[[134]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.entry_widget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.touchEntry" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "PyQt5" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "sys" lines:[[664]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.mdi_line" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtWidgets" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtCore" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtGui" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "sys" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: skipping "time" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.widgets.entry_widget" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.lib.aux_program_loader" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "sys" lines:[[330]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "PyQt5.QtWidgets" lines:[[331]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtWidgets" lines:[[393]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtCore" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtGui" lines:[[395]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "sys" lines:[[396]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: skipping "sys" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "gcode" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qt5_graphics" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp.core" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "sys" lines:[[202]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "PyQt5.QtWidgets" lines:[[203]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "PyQt5.QtWidgets" lines:[[516]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "sys" lines:[[387]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtWidgets" lines:[[388]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtCore" lines:[[389]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "time" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.widgets.probe_routines" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.widgets.widget_baseclass" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "sys" lines:[[64]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "PyQt5.QtWidgets" lines:[[65]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: skipping "sys" lines:[10] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "sys" lines:[[318]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "PyQt5.QtWidgets" lines:[[319]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "sys" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "PyQt5.QtWidgets" lines:[[294]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtWidgets" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtCore" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtGui" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "linuxcnc" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.xembed" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.message" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.notify" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.audio_player" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.preferences" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.machine_log" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "zmq" lines:[[[61]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "json" lines:[[[67]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[[[[[403]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.dialog_widget" lines:[[[511], [526], [536], [544], [552], [561], [580], [588], [597], [605], [613], [621], [630], [638], [646]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.overlay_widget" lines:[[[569]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.lib.aux_program_loader" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.core" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.simple_widgets" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "sys" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.widgets.led_widget" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "sys" lines:[[558]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "PyQt5.QtGui" lines:[[559]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.simple_widgets" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtWidgets" lines:[[785]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtCore" lines:[[786]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtGui" lines:[[787]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "sys" lines:[[789]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.core" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.qt_makegui" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.dialog_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "sys" lines:[[123]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "PyQt5.QtWidgets" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "PyQt5.QtWidgets" lines:[[587]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtWidgets" lines:[[268]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtCore" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtGui" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "sys" lines:[[271]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.widget_baseclass" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.dialogMixin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtWidgets" lines:[[593]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtCore" lines:[[594]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtGui" lines:[[595]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtWidgets" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtCore" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtGui" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebEngineWidgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebKitWidgets" lines:[[[[17]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.widgets.widget_baseclass" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.lib" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "PyQt5.QtWidgets" lines:[[137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "_togl" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "glnav" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "tkinter.dialog" lines:[[[209]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py: "rs274.interpret" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "rs274" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "itertools" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "glnav" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "hershey" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "gcode" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py: "gcode" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: "nf" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: skipping "sys" lines:[167] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: "configparser" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: skipping "sys" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: "stepconf" lines:[[[[221]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py: skipping "__main__" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py: "hal" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "pyvcp_widgets" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "rs274.OpenGLTk" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "hal" lines:[18, 25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "glnav" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "tkinter" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "pickle" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "nf" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "rs274.options" lines:[[13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "os" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py: "stdglue" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py: "remap" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: "qtvcp.widgets.file_manager" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "hal" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.core" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.lib.preferences" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.simple_widgets" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.simple_widgets" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.led_widget" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.widgets.dialog_widget" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.dialog_widget" lines:[11, 12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.nurbs_editor" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.toolbar_actions" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.core" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.keybindings" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.aux_program_loader" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.notify" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.dialog_widget" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.preferences" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.overlay_widget" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.tool_offsetview" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.dialog_widget" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.notify" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.geditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.status_label" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.state_led" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.bar" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.writer" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.keybindings" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcodes" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[13] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[286]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[297]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[291]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[452]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[457]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.auto_height.auto_height" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.writer" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcodes" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.aux_program_loader" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[450]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[455]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[466]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[470]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[475]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.gcode_editor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.file_manager" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.gcodes" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.action_button" lines:[5666] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.axis_tool_button" lines:[5667] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.camview_widget" lines:[5668] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.dro_widget" lines:[5669] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.file_manager" lines:[5670] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_editor" lines:[5671] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_graphics" lines:[5672] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.hal_label" lines:[5673] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.jog_increments" lines:[5674] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.led_widget" lines:[5675] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.machine_log" lines:[5676] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.mdi_history" lines:[5677] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.screen_options" lines:[5678] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.simple_widgets" lines:[5679] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_label" lines:[5680] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_slider" lines:[5681] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.system_tool_button" lines:[5682] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "hal" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.gcode_editor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.mdi_line" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.tool_offsetview" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.file_manager" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.writer" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcodes" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.simple_widgets" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[229]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[233]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[[[239]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[422]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[427]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.toolbar_actions" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py is not executable /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: `source [file join $::env(HALLIB_DIR) hal_procs_lib.tcl]' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: ` } else {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage is ${LINUXCNC_EMCSH-wish} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: invalid command: ${LINUXCNC_EMCSH-wish} /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: `if ([info exists env(LANG)]) {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl is ${LINUXCNC_EMCSH-emcsh} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: invalid command: ${LINUXCNC_EMCSH-emcsh} shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: /usr/scripts/rip-environment -> /usr/scripts/rip-environment (raw, not installed) shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git indexed by: /usr/bin/git -> git-core, /usr/games/git -> fakegit shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git -> /usr/bin/git -> git-core (via contents_index_bin) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' --- find-requires-deps 2024-04-13 08:13:47.858206440 +0000 +++ filter-requires-deps 2024-04-13 08:13:47.860206481 +0000 @@ -24,3 +24,3 @@ /usr/lib/python3/site-packages -/usr/scripts/rip-environment + coreutils @@ -181,3 +181,3 @@ tk -typelib(Cairo) + typelib(GLib) find-requires: FINDPACKAGE-COMMANDS: awk basename cat clear cp cut date dirname gcc git grep head ipcrm ln lsb_release mkdir mktemp ps pylupdate5 python3 readlink rm sleep sudo tclsh touch tty uname uptime wc wish xdpyinfo Provides: python3(_hal), python3(_togl), python3(bitfile), python3(bwidget), python3(filtertest) = set:edp3, python3(flowsnake) = set:edp3, python3(gcode), python3(gladevcp), python3(gladevcp.calculatorwidget), python3(gladevcp.combi_dro), python3(gladevcp.core), python3(gladevcp.drowidget), python3(gladevcp.gladebuilder), python3(gladevcp.gtk_action), python3(gladevcp.hal_actions), python3(gladevcp.hal_bar), python3(gladevcp.hal_dial), python3(gladevcp.hal_filechooser), python3(gladevcp.hal_graph), python3(gladevcp.hal_gremlin), python3(gladevcp.hal_gremlin_plus), python3(gladevcp.hal_lightbutton), python3(gladevcp.hal_mdihistory), python3(gladevcp.hal_meter), python3(gladevcp.hal_pyngcgui), python3(gladevcp.hal_pythonplugin), python3(gladevcp.hal_sourceview), python3(gladevcp.hal_widgets), python3(gladevcp.iconview), python3(gladevcp.jogwheel), python3(gladevcp.led), python3(gladevcp.macro_widget), python3(gladevcp.makepins), python3(gladevcp.offsetpage_widget), python3(gladevcp.offsetwidget), python3(gladevcp.overridewidget), python3(gladevcp.persistence), python3(gladevcp.speedcontrol), python3(gladevcp.state_label), python3(gladevcp.status_label), python3(gladevcp.tooledit_widget), python3(gladevcp.xembed), python3(gladevcp_makepins), python3(glnav), python3(gmoccapy), python3(gmoccapy.dialogs), python3(gmoccapy.getiniinfo), python3(gmoccapy.icon_theme_helper), python3(gmoccapy.notification), python3(gmoccapy.player), python3(gmoccapy.preferences), python3(gmoccapy.widgets), python3(gremlin), python3(gremlin_view), python3(gscreen), python3(gscreen.emc_interface), python3(gscreen.keybindings), python3(gscreen.mdi), python3(gscreen.preferences), python3(hal), python3(hal_glib), python3(hershey), python3(holecircle) = set:edp3, python3(involute) = set:edp3, python3(lineardeltakins), python3(linux_event), python3(linuxcnc), python3(linuxcnc_util), python3(multifilebuilder), python3(nf), python3(panels.cam_align.cam_align_handler) = set:ed3l, python3(panels.copy.copy_handler) = set:ed3l, python3(panels.qtplasmac_sim.qtplasmac_sim_handler) = set:ed3l, python3(panels.sim_panel.sim_panel_handler) = set:ed3l, python3(panels.spindle_belts.spindle_belts_handler) = set:ed3l, python3(panels.test_button.test_button_handler) = set:ed3l, python3(panels.test_dial.test_dial_handler) = set:ed3l, python3(panels.test_led.test_led_handler) = set:ed3l, python3(panels.test_panel.test_panel_handler) = set:ed3l, python3(panels.test_probe.test_probe_handler) = set:ed3l, python3(panels.tool_dialog.tool_dialog_handler) = set:ed3l, python3(panels.versaprobe.versaprobe_handler) = set:ed3l, python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler) = set:ed3l, python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler) = set:ed3l, python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler) = set:ed3l, python3(panels.vismach_millturn.vismach_millturn_handler) = set:ed3l, python3(panels.vismach_router_atc.vismach_router_atc_handler) = set:ed3l, python3(panels.vismach_scara.vismach_scara_handler) = set:ed3l, python3(plasmac.block), python3(plasmac.bolt_circle), python3(plasmac.circle), python3(plasmac.ellipse), python3(plasmac.gusset), python3(plasmac.line), python3(plasmac.polygon), python3(plasmac.rectangle), python3(plasmac.run_from_line), python3(plasmac.sector), python3(plasmac.slot), python3(plasmac.star), python3(plasmac.triangle), python3(pncconf), python3(pncconf.build_HAL), python3(pncconf.build_INI), python3(pncconf.data), python3(pncconf.pages), python3(pncconf.private_data), python3(pncconf.tests), python3(popupkeyboard), python3(propertywindow), python3(pyhal), python3(pyngcgui), python3(pyui), python3(pyui.commands), python3(pyui.master), python3(pyui.panelui_validate), python3(pyui.widgets), python3(pyvcp_widgets), python3(qt5_graphics), python3(qtvcp), python3(qtvcp.core), python3(qtvcp.lib), python3(qtvcp.lib.audio_player), python3(qtvcp.lib.auto_height.auto_height), python3(qtvcp.lib.aux_program_loader), python3(qtvcp.lib.colored_formatter), python3(qtvcp.lib.gcode_utility), python3(qtvcp.lib.gcode_utility.facing), python3(qtvcp.lib.gcode_utility.hole_circle), python3(qtvcp.lib.gcode_utility.hole_enlarge), python3(qtvcp.lib.gcodes), python3(qtvcp.lib.keybindings), python3(qtvcp.lib.machine_log), python3(qtvcp.lib.mdi_text), python3(qtvcp.lib.message), python3(qtvcp.lib.notify), python3(qtvcp.lib.preferences), python3(qtvcp.lib.qt_ngcgui.ngcgui), python3(qtvcp.lib.qt_pdf.PDFViewer), python3(qtvcp.lib.qt_vismach), python3(qtvcp.lib.qt_vismach.fanuc_200f), python3(qtvcp.lib.qt_vismach.gantry_5axis), python3(qtvcp.lib.qt_vismach.mill_xyz), python3(qtvcp.lib.qt_vismach.millturn), python3(qtvcp.lib.qt_vismach.primitives), python3(qtvcp.lib.qt_vismach.qt_vismach), python3(qtvcp.lib.qt_vismach.scara), python3(qtvcp.lib.qtplasmac), python3(qtvcp.lib.qtplasmac.conv_block), python3(qtvcp.lib.qtplasmac.conv_bolt), python3(qtvcp.lib.qtplasmac.conv_circle), python3(qtvcp.lib.qtplasmac.conv_ellipse), python3(qtvcp.lib.qtplasmac.conv_gusset), python3(qtvcp.lib.qtplasmac.conv_line), python3(qtvcp.lib.qtplasmac.conv_polygon), python3(qtvcp.lib.qtplasmac.conv_rectangle), python3(qtvcp.lib.qtplasmac.conv_sector), python3(qtvcp.lib.qtplasmac.conv_settings), python3(qtvcp.lib.qtplasmac.conv_slot), python3(qtvcp.lib.qtplasmac.conv_star), python3(qtvcp.lib.qtplasmac.conv_triangle), python3(qtvcp.lib.qtplasmac.conversational), python3(qtvcp.lib.qtplasmac.set_offsets), python3(qtvcp.lib.qtplasmac.tooltips), python3(qtvcp.lib.qtplasmac.updater), python3(qtvcp.lib.ripper.gcode_ripper), python3(qtvcp.lib.sys_notify), python3(qtvcp.lib.toolbar_actions), python3(qtvcp.lib.touchoff_subprogram), python3(qtvcp.lib.virtual_keyboard), python3(qtvcp.lib.writer), python3(qtvcp.lib.writer.ext), python3(qtvcp.lib.writer.ext.datetime), python3(qtvcp.lib.writer.ext.find), python3(qtvcp.lib.writer.ext.table), python3(qtvcp.lib.writer.ext.wordcount), python3(qtvcp.lib.writer.writer), python3(qtvcp.lib.xembed), python3(qtvcp.logger), python3(qtvcp.plugins), python3(qtvcp.plugins.actionbutton_plugin), python3(qtvcp.plugins.bar_plugin), python3(qtvcp.plugins.basic_probe_plugin), python3(qtvcp.plugins.camview_plugin), python3(qtvcp.plugins.container_plugin), python3(qtvcp.plugins.detach_tabs_plugin), python3(qtvcp.plugins.dialog_plugin), python3(qtvcp.plugins.graphics_plugin), python3(qtvcp.plugins.hal_label_plugin), python3(qtvcp.plugins.jogincrements_plugin), python3(qtvcp.plugins.joypad_plugin), python3(qtvcp.plugins.led_plugin), python3(qtvcp.plugins.nurbs_editor_plugin), python3(qtvcp.plugins.overlay_plugin), python3(qtvcp.plugins.qtvcp_plugin), python3(qtvcp.plugins.round_gauge_plugin), python3(qtvcp.plugins.round_progress_bar_plugin), python3(qtvcp.plugins.screenoptions_plugin), python3(qtvcp.plugins.simplewidgets_plugin), python3(qtvcp.plugins.state_label_plugin), python3(qtvcp.plugins.state_led_plugin), python3(qtvcp.plugins.status_adjustment_bar_plugin), python3(qtvcp.plugins.status_label_plugin), python3(qtvcp.plugins.status_slider_plugin), python3(qtvcp.plugins.tab_widget_plugin), python3(qtvcp.plugins.toolbutton_plugin), python3(qtvcp.plugins.versa_probe_plugin), python3(qtvcp.plugins.virtualkeyboard_plugin), python3(qtvcp.plugins.web_widget_plugin), python3(qtvcp.plugins.widgets_plugin), python3(qtvcp.qt_action), python3(qtvcp.qt_istat), python3(qtvcp.qt_makegui), python3(qtvcp.qt_makepins), python3(qtvcp.qt_pstat), python3(qtvcp.qt_tstat), python3(qtvcp.qtvcp_handler), python3(qtvcp.widgets), python3(qtvcp.widgets.action_button), python3(qtvcp.widgets.action_button_round), python3(qtvcp.widgets.action_tool_button), python3(qtvcp.widgets.adjustment_bar), python3(qtvcp.widgets.axis_tool_button), python3(qtvcp.widgets.bar), python3(qtvcp.widgets.basic_probe), python3(qtvcp.widgets.calculator), python3(qtvcp.widgets.camview_widget), python3(qtvcp.widgets.container_widgets), python3(qtvcp.widgets.detach_tabs), python3(qtvcp.widgets.dialogMixin), python3(qtvcp.widgets.dialog_widget), python3(qtvcp.widgets.dro_widget), python3(qtvcp.widgets.entry_widget), python3(qtvcp.widgets.fake_status), python3(qtvcp.widgets.file_manager), python3(qtvcp.widgets.gcode_editor), python3(qtvcp.widgets.gcode_graphics), python3(qtvcp.widgets.geditor), python3(qtvcp.widgets.general_hal_input), python3(qtvcp.widgets.general_hal_output), python3(qtvcp.widgets.hal_label), python3(qtvcp.widgets.hal_selectionbox), python3(qtvcp.widgets.image_switcher), python3(qtvcp.widgets.jog_increments), python3(qtvcp.widgets.joypad), python3(qtvcp.widgets.led_widget), python3(qtvcp.widgets.machine_log), python3(qtvcp.widgets.macro_widget), python3(qtvcp.widgets.mdi_history), python3(qtvcp.widgets.mdi_line), python3(qtvcp.widgets.mdi_touchy), python3(qtvcp.widgets.nurbs_editor), python3(qtvcp.widgets.offset_tool_button), python3(qtvcp.widgets.origin_offsetview), python3(qtvcp.widgets.overlay_widget), python3(qtvcp.widgets.probe_routines), python3(qtvcp.widgets.probe_subprog), python3(qtvcp.widgets.qtvcp_icons), python3(qtvcp.widgets.radio_axis_selector), python3(qtvcp.widgets.richtext_selector), python3(qtvcp.widgets.round_gauge), python3(qtvcp.widgets.round_progress), python3(qtvcp.widgets.runFromLine_dialog), python3(qtvcp.widgets.screen_options), python3(qtvcp.widgets.simple_widgets), python3(qtvcp.widgets.state_label), python3(qtvcp.widgets.state_led), python3(qtvcp.widgets.status_label), python3(qtvcp.widgets.status_slider), python3(qtvcp.widgets.status_stacked), python3(qtvcp.widgets.stylesheeteditor), python3(qtvcp.widgets.system_tool_button), python3(qtvcp.widgets.tab_widget), python3(qtvcp.widgets.tool_offsetview), python3(qtvcp.widgets.touchEntry), python3(qtvcp.widgets.versa_probe), python3(qtvcp.widgets.virtualkeyboard), python3(qtvcp.widgets.web_widget), python3(qtvcp.widgets.widget_baseclass), python3(qtvcp.widgets.widget_switcher), python3(qtvcp.widgets.xembed), python3(rotarydeltakins), python3(rs274), python3(rs274.OpenGLTk), python3(rs274.author), python3(rs274.glcanon), python3(rs274.interpret), python3(rs274.options), python3(screens.blender.blender_handler) = set:ed3l, python3(screens.qt_cnc.qt_cnc_handler) = set:ed3l, python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler) = set:ed3l, python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler) = set:ed3l, python3(screens.qtaxis.qtaxis_handler) = set:ed3l, python3(screens.qtdragon.qtdragon_handler) = set:ed3l, python3(screens.qtdragon_hd.qtdragon_hd_handler) = set:ed3l, python3(screens.qtlathe.qtlathe_handler) = set:ed3l, python3(screens.qtplasmac.languages.qtplasmac) = set:ed3l, python3(screens.qtplasmac.qtplasmac_handler) = set:ed3l, python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler) = set:ed3l, python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler) = set:ed3l, python3(screens.qttouchy.qttouchy_handler) = set:ed3l, python3(screens.tester.tester_handler) = set:ed3l, python3(screens.woodpecker.woodpecker_handler) = set:ed3l, python3(screens.x1mill.x1mill_handler) = set:ed3l, python3(stepconf), python3(stepconf.build_HAL), python3(stepconf.build_INI), python3(stepconf.import_mach), python3(stepconf.pages), python3(tooldb), python3(touchy), python3(touchy.emc_interface), python3(touchy.filechooser), python3(touchy.hal_interface), python3(touchy.listing), python3(touchy.mdi), python3(touchy.preferences), python3(vcpparse), python3(vismach), tcl(Hal), tcl(Hal)-1 = 1.0, tcl(Linuxcnc), tcl(Linuxcnc)-1 = 1.0, tcl(Ngcgui), tcl(Ngcgui)-1 = 1.0, tcl(Ngcguittt), tcl(Ngcguittt)-1 = 1.0 Requires: liblinuxcnc = 2.9.2-alt3.20240203, python3-module-PyQt5-devel, libgtksourceview3-gir, libX11-devel, tclx, tcl-blt, python3(Xlib) < 0, python3(PyQt5.Qsci) < 0, /bin/bash, /bin/sh, /lib/ld-linux.so.2, /lib/udev/rules.d, /usr/bin/env, /usr/bin/python3, /usr/bin/python3.12, /usr/bin/tclsh, /usr/bin/tclsh8.6, /usr/bin/wish, /usr/bin/wish8.6, /usr/lib/python3/site-packages, coreutils, gawk, gcc-common, git-core, grep, libX11.so.6 >= set:oja5r3qabUpLHlTcdkK7Ymnta6aWUK6qURI2aereyuySbaY9Y9rRf80, libXinerama.so.1 >= set:hfyH4K6, libXmu.so.6 >= set:lktel, libboost_python312.so.1.84.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.2.3), libc.so.6(GLIBC_2.27), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.7), libc.so.6(GLIBC_2.8), libcairo.so.2 >= set:miBeiC9UuDqAUQ1bepgkhH08f6m87ljhFbj6, libepoxy.so.0 >= set:plG6OtaOh21hPpoEbYgihHZ0wsB7PrHp7He0, libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgdk-3.so.0 >= set:nkZ5ndiwLew01gu7UA, libgdk-x11-2.0.so.0 >= set:njH9A3kDQ0iQRBflIP1zlE5TpwDZsPmjGbQ, libglib-2.0.so.0 >= set:olyg8bKheHPr7MU1, libgobject-2.0.so.0 >= set:mjQCdZlc930HMK1, libgtk-3.so.0 >= set:qjjZoCF3lFXh6tMGe5LNfHjmYeZBthRtN41TeIZzjgwWOrHiSh2NZBTl9RaGCZcaZtsSDoklAfoY3jZqdwNTjVxluts4fzptNZoObnMXHUBHYRt39LkeFCpeX0XGSNmA8AjwtwC5hgzieP0K2oI8aJb3kDhZ4iVp7IxwWvgRbyDTqaJhAOTD2Fv8g9yPZ6NOuGRIGtqP9FiPwZfRTshMUVUTNtViaQgX5ndOGrJMiFzxXDm6AW3HZBRN91ZxbqL4uj5Pt3embDjf1R8JsH7xQTCBVCxMfYTOJIZFI9ZbiGb6GLX0FyKvWxZH06khJ56lr41PV7VxkpV7CX5AN30dAgkjASU69WAU20ZKQEW5CdLKnYV6PQaWR9Q2d4, libgtk-x11-2.0.so.0 >= set:pijZofB1Sac1HWm6UJI4cT7ZgTZ5cu7LyBFNQFMTkKvPsM6syJWtgE6gCt8VZC2002Yr6O3qpMKORxMYFpGbygZwTFmPjEBmkFK5tZ9puR8V4nvNqcMb9Q8ET5Z5nwuEj7uZbKfI69aHIIc6AKSdSXr1KNVy75UzoI60weGwIZrr62BMCZ1BOfXpj2M6ZjtlXi25ghyZccTXY7GXsFuvoeSJ3yKQFbX9A7iCzUEYa6aZ04fAonLTJJ2yQZ7HcxVrWamaKGUdBx8Y99PalB5dPYDzTFF762xI20, liblinuxcnchal.so.0 >= set:kdPx99okMC0Dz1625MawlIfquO3JZ3ZIUi5Jl7M43uZ4jrJfiRqxZ2hezaWOwqo8jNxXb4PXA5GbMGAP8gNN7e5Z7F9EPZhr3lvZ8aQw6VY2Cu2agoAmBmnw7UQIPmWiMLuqjUJnhudWalGzhjgU7, liblinuxcncini.so.0 >= set:jf3pACnRkFYa1jK9dmLdZcAMQZdkP4S54W3, libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libmodbus.so.5 >= set:kf4sxmJBcjkoYXJ6nZ8w1f3UAmWo529bNQO9HdZ6GfYWQgMVJKZenaurI1UX4, libnml.so.0 >= set:nhHZFI3kBS0Ma7l8Tbc7NDAj0cVe7YpJAecK8HiAlVmUFIacmYZAgNKb7AgZ9o3YcwI77x8lKghWwBp3R3aHXufreVgSJOcHDIMmg3FTiWGgZDSqajrVXGCmzmwK9kEnrrZAXgB, libpango-1.0.so.0 >= set:miqUTrpg55DU675j31iPjU59gVL2, libpangocairo-1.0.so.0 >= set:jiZ1Z0, libposemath.so.0 >= set:mhNqbLmit1h1SKAkf3R8yKzITkH51qlNb2mXMvLIbzYdLSZ1Pn3dvFo360T4Ym3VUZ06J9T65VCYVK5, libpyplugin.so.0 >= set:ifB9gZhMHZs51, libpython3.12.so.1.0 >= set:oipCiruqzTeZzb6nQEDgYmcycRwVJdbZ5iXKYZiJODaguD1Z09heVWM4C62R9XS3UbkznKwtFB0v3EX8wxJskhoMjZnQOps91h0gXMB2zZ0ZiESnuTSI6RauE3xO1AePZyWlNaBQhCb27NyC2QiQiNF0zEU1FA9BQnlAid, libreadline.so.8 >= set:njCJKlFcmgU8mvL3SqZmyq3ZFmIppb, librs274.so.0 >= set:oklu8nstiJF4gERvmYKLZu2B25LRi2g8GwakLmkAhIVMce, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.14), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.20), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtk8.6.so >= set:mh48jtZxaNUhMsSfBJ4AXC6RIwDmyqFM8nd9l1ee9PQ0ud0, libtooldata.so.0 >= set:ieCH2SkPFzG4BeSHWNfZwfGC1oYUwSluc7, libudev.so.1 >= set:kgKhqJ5KQ3IrBeCbBEkBBomRh1RpLFAx211, libudev.so.1(LIBUDEV_183), libusb-1.0.so.0 >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu, lsb-release, procps, python3, python3(OpenGL) < 0, python3(OpenGL.GL) < 0, python3(OpenGL.GLU) < 0, python3(OpenGL.raw.GLX._types) < 0, python3(PyQt5) < 0, python3(PyQt5.QtCore) < 0, python3(PyQt5.QtDesigner) < 0, python3(PyQt5.QtGui) < 0, python3(PyQt5.QtPrintSupport) < 0, python3(PyQt5.QtWidgets) < 0, python3(__future__) < 0, python3(array) < 0, python3(binascii) < 0, python3(cairo) < 0, python3(collections) < 0, python3(configobj) < 0, python3(configparser) < 0, python3(copy) < 0, python3(ctypes) < 0, python3(datetime) < 0, python3(dbus) < 0, python3(decimal) < 0, python3(enum) < 0, python3(fcntl) < 0, python3(fnmatch) < 0, python3(functools) < 0, python3(getopt) < 0, python3(gettext) < 0, python3(gi) < 0, python3(gi.repository) < 0, python3(glob) < 0, python3(hashlib) < 0, python3(importlib) < 0, python3(inspect) < 0, python3(json) < 0, python3(locale) < 0, python3(logging) < 0, python3(math) < 0, python3(mimetypes) < 0, python3(numpy) < 0, python3(numpy.core) < 0, python3(operator) < 0, python3(optparse) < 0, python3(os) < 0, python3(pickle) < 0, python3(random) < 0, python3(re) < 0, python3(readline) < 0, python3(select) < 0, python3(serial) < 0, python3(shutil) < 0, python3(signal) < 0, python3(socket) < 0, python3(string) < 0, python3(struct) < 0, python3(subprocess) < 0, python3(tarfile) < 0, python3(tempfile) < 0, python3(textwrap) < 0, python3(threading) < 0, python3(tkinter) < 0, python3(traceback) < 0, python3(types) < 0, python3(uuid) < 0, python3(validate) < 0, python3(warnings) < 0, python3(webbrowser) < 0, python3(xml.dom.minidom) < 0, python3(xml.etree.ElementPath) < 0, python3(xml.etree.ElementTree) < 0, python3(yapps) < 0, python3.12-ABI, rtld(GNU_HASH), sudo, tcl, tcl(BWidget), tcl(Tk), tcl(Tk)-8 >= 8.0, termutils, tk, typelib(GLib), typelib(GObject), typelib(Gdk), typelib(GdkPixbuf), typelib(GdkX11), typelib(Gio), typelib(Gst), typelib(Gtk), typelib(GtkSource), typelib(Notify), typelib(Pango), typelib(PangoCairo), typelib(Vte), util-linux, xdpyinfo Requires(rpmlib): rpmlib(SetVersions) Obsoletes: linuxcnc-data <= 2.9.2-alt3.20240203 Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.2P3X6D Creating linuxcnc-debuginfo package Processing files: liblinuxcnc-devel-2.9.2-alt3.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.CJfkPH find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.iSY9pb find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/modal_state.hh:25:10: fatal error: vector: No such file or directory 25 | #include | ^~~~~~~~ compilation terminated. cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh: cpp failed, trying c++ mode /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh: cpp failed /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh:19:10: fatal error: rpc/rpc.h: No such file or directory 19 | #include /* struct XDR */ | ^~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h:24: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h:20: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h:34: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h:33: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h:40: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h: cpp failed In file included from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/object_fwd.hpp:8, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh:27: /usr/include/boost/python/detail/wrap_python.hpp:57:11: fatal error: pyconfig.h: No such file or directory 57 | # include | ^~~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh: cpp failed ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.2-alt3.20240203, /usr/lib/liblinuxcnchal.so.0, /usr/lib/liblinuxcncini.so.0, /usr/lib/libnml.so.0, /usr/lib/libposemath.so.0, /usr/lib/libpyplugin.so.0, /usr/lib/librs274.so.0, /usr/lib/libtooldata.so.0, boost-devel-headers Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.XIRFbt Processing files: liblinuxcnc-2.9.2-alt3.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.akRcyX find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0: 119 symbols, 17 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcncini.so.0: 35 symbols, 16 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libnml.so.0: 836 symbols, 20 bpp warning: hash collision: _ZN3NML12format_inputEP6NMLmsg count_characters_in_print_list lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libposemath.so.0: 415 symbols, 19 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libpyplugin.so.0: 23 symbols, 15 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/librs274.so.0: 2001 symbols, 21 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libtooldata.so.0: 21 symbols, 15 bpp Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.xQuxXz find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: liblinuxcnchal.so.0 = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2, liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0QglXYuh9w4nU6472TqASbUMZzhuUpq1XaKcom1djYYwSVwS7phRSmhfo, libnml.so.0 = set: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, libposemath.so.0 = set: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, libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxAjT5GzcsH3a2zLVzhb, librs274.so.0 = set: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, libtooldata.so.0 = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Requires: libboost_python312.so.1.84.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNuojQRqzp5SpoxPKmKTnJQ2USkkKqHp5h4X8nhmZbVJeHI3ENEULfvnhZ91wcZ0CZvtZ8nZ1cmY40zffx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.9), libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_4.0.0), libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libpython3.12.so.1.0 >= set:oi0GOBAUI3x9Zm2hWASt1vZ3R4nYYfA4VAH3joq8Yna2GUTvbSg3QBmBWdwKz06SOh5x1fxZEHbvodwVQDokPlMCfIgsrE3xO1AuPv374qZiTjyQZcRdeSUEtPaaoPfwkCRbdyfJ0, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.5), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.18), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.26), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtirpc.so.3 >= set:miLQRMTfkMBlyKlAtNseOZekznKvK3HZEZCwnOh, libtirpc.so.3(TIRPC_0.3.0), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.uTLuho Creating liblinuxcnc-debuginfo package Processing files: linuxcnc-debuginfo-2.9.2-alt3.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.vztUnZ find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.oRrga3 find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.2-alt3.20240203, /usr/lib/debug/lib/ld-linux.so.2.debug, debug(libX11.so.6), debug(libXinerama.so.1), debug(libXmu.so.6), debug(libboost_python312.so.1.84.0), debug(libc.so.6), debug(libcairo.so.2), debug(libepoxy.so.0), debug(libgcc_s.so.1), debug(libgdk-3.so.0), debug(libgdk-x11-2.0.so.0), debug(libglib-2.0.so.0), debug(libgobject-2.0.so.0), debug(libgtk-3.so.0), debug(libgtk-x11-2.0.so.0), debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libm.so.6), debug(libmodbus.so.5), debug(libnml.so.0), debug(libpango-1.0.so.0), debug(libpangocairo-1.0.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(libpython3.12.so.1.0), debug(libreadline.so.8), debug(librs274.so.0), debug(libstdc++.so.6), debug(libtk8.6.so), debug(libtooldata.so.0), debug(libudev.so.1), debug(libusb-1.0.so.0) Processing files: liblinuxcnc-debuginfo-2.9.2-alt3.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.YwlH1k find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.vrf2KT find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libnml.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(librs274.so.0), debug(libtooldata.so.0) Requires: liblinuxcnc = 2.9.2-alt3.20240203, debug(libboost_python312.so.1.84.0), debug(libc.so.6), debug(libgcc_s.so.1), debug(libm.so.6), debug(libpython3.12.so.1.0), debug(libstdc++.so.6), debug(libtirpc.so.3) Adding to liblinuxcnc-devel a strict dependency on linuxcnc Adding to linuxcnc a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on linuxcnc Adding to liblinuxcnc-debuginfo a strict dependency on liblinuxcnc Adding to liblinuxcnc-devel a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on liblinuxcnc-debuginfo Removing from linuxcnc-debuginfo 47 sources provided by liblinuxcnc-debuginfo also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/emc/pythonplugin also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/cms also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/linklist also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/nml also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/os_intf also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/posemath also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/rcs Removing 7 extra deps from linuxcnc due to dependency on liblinuxcnc Removing 7 extra deps from liblinuxcnc-devel due to dependency on liblinuxcnc Removing 7 extra deps from linuxcnc-debuginfo due to dependency on liblinuxcnc-debuginfo Removing 1 extra deps from liblinuxcnc-devel due to repentancy on linuxcnc Removing 31 extra deps from linuxcnc due to repentancy on liblinuxcnc Removing 6 extra deps from linuxcnc-debuginfo due to repentancy on liblinuxcnc-debuginfo Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-2.9.2-alt3.20240203.i586.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-devel-2.9.2-alt3.20240203.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-2.9.2-alt3.20240203.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-debuginfo-2.9.2-alt3.20240203.i586.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-debuginfo-2.9.2-alt3.20240203.i586.rpm (w2T16.xzdio) 359.34user 192.24system 2:27.35elapsed 374%CPU (0avgtext+0avgdata 430272maxresident)k 0inputs+0outputs (0major+23807549minor)pagefaults 0swaps 5.12user 4.03system 3:25.72elapsed 4%CPU (0avgtext+0avgdata 126600maxresident)k 1696inputs+0outputs (0major+402624minor)pagefaults 0swaps --- linuxcnc-2.9.2-alt3.20240203.i586.rpm.repo 2024-03-02 20:03:16.000000000 +0000 +++ linuxcnc-2.9.2-alt3.20240203.i586.rpm.hasher 2024-04-13 08:14:32.680121285 +0000 @@ -7065,3 +7065,3 @@ File: /etc/linuxcnc 40755 root:root -File: /etc/linuxcnc/rtapi.conf 100644 root:root 077d1ad8990614a0a1f7611278949ab5 +File: /etc/linuxcnc/rtapi.conf 100644 root:root b205ca700c7b63c4b3813e290338444b File: /lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 @@ -7072,3 +7072,3 @@ File: /usr/bin/axis-remote 100755 root:root 981e9bcc97828e221b97460431572c13 -File: /usr/bin/classicladder 100755 root:root d8588002d720eb43a71c91b2b2f4a823 +File: /usr/bin/classicladder 100755 root:root 4166226181ba7eb6fac2ce380a60746e File: /usr/bin/debuglevel 100755 root:root 97e6e63a3ada21ce0e0bcc7b967356c6 @@ -7088,3 +7088,3 @@ File: /usr/bin/halcompile 100755 root:root fbd19786f0f220820b5228b1cec74381 -File: /usr/bin/halmeter 100755 root:root ce012683cee39262bdee537ae4319915 +File: /usr/bin/halmeter 100755 root:root 9887e76c26e7efff09657ff14ed5195a File: /usr/bin/halreport 100755 root:root a67ce1beb843a453c514b9051b27a92b @@ -7093,3 +7093,3 @@ File: /usr/bin/halsampler 100755 root:root ffaea0179631d634e48ba91128181631 -File: /usr/bin/halscope 100755 root:root dc4636a07d6c49e285b1b6c5e6a8e56d +File: /usr/bin/halscope 100755 root:root 8a4e5a51eeb0ac6f4dab56dd4460ea85 File: /usr/bin/halshow 100755 root:root 3382dff126dc6c7bbdc389175f221d43 @@ -7365,3 +7365,3 @@ File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root 3af90ca2ba4844713d7cf788983a4f70 -File: /usr/lib/linuxcnc/realtime 100755 root:root 91c2f09a0e52353a00ea811c3dab70c0 +File: /usr/lib/linuxcnc/realtime 100755 root:root ef3896e4cffbc7d5cf3c5e385f8bd0b0 File: /usr/lib/python3/site-packages/__pycache__ 40755 root:root @@ -7434,3 +7434,3 @@ File: /usr/lib/python3/site-packages/_hal.so 100644 root:root 5dca32ab3cdf03f07f50dfc28c7428b7 -File: /usr/lib/python3/site-packages/_togl.so 100644 root:root 2cea2734275b97fe37ce86c0c6e5e17a +File: /usr/lib/python3/site-packages/_togl.so 100644 root:root 5174b27f1b57447b2506944c33df7456 File: /usr/lib/python3/site-packages/bitfile.py 100644 root:root ba4c87be0324d9f0c6de2b1ef31a1386 @@ -8582,3 +8582,3 @@ File: /usr/lib/tcl/linuxcnc/halshow_icon.png 100644 root:root 0cfc3902d5129e77b30673cdfa0f1a35 -File: /usr/lib/tcl/linuxcnc/linuxcnc.so 100644 root:root 5676d874c3d6544af0b1987ae373bff4 +File: /usr/lib/tcl/linuxcnc/linuxcnc.so 100644 root:root b9eacbb817806acbf7217137e5a29440 File: /usr/lib/tcl/linuxcnc/linuxcnc.tcl 100755 root:root fe2680d1a86108e9a8f65b16e190eddd @@ -12365,3 +12365,3 @@ File: /usr/share/man/man1/panelui.1.xz 100644 root:root 61f547f5665fc80d03da476743e17d4d -File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root e20c6d793e506bafc771928214579ae5 +File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root d9573ed315c36981a6a381d07393ddf6 File: /usr/share/man/man1/pmx485-test.1.xz 100644 root:root 20b815b28f4df48358282e8d88b3a0fa @@ -12394,3 +12394,3 @@ File: /usr/share/man/man1/teach-in.1.xz 100644 root:root fc226b9d2b564e3fad4c5ff0b945c813 -File: /usr/share/man/man1/thermistor.1.xz 100644 root:root 2bc8f2403f32ede2a5063e42455e36e7 +File: /usr/share/man/man1/thermistor.1.xz 100644 root:root 0e43217591556a2d94a8ba3990c2dab1 File: /usr/share/man/man1/tooledit.1.xz 100644 root:root c7d86f1ec43340e80f69de9a88166fd8 @@ -12400,3 +12400,3 @@ File: /usr/share/man/man1/vfs11_vfd.1.xz 100644 root:root 65395473fdddbe5a7f8789b49d8b6b37 -File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root 9d2d7da839efd018a797417c7e98664d +File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root c8d7be9d0f1a375e57b48bbb3869fb2f File: /usr/share/man/man1/xhc-hb04-accels.1.xz 100644 root:root 0cff8637e027604edb6d81ff9beaa4ff @@ -12521,44 +12521,44 @@ File: /usr/share/man/man3/undocumented.3rtapi.xz 100644 root:root 002b721b89292b438d9dbf89f1ff823b -File: /usr/share/man/man9/abs.9.xz 100644 root:root 3b22f3b247af78f0735d0fc925009e02 -File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root 06c69b00f6063bcfec49cfe6f095f554 -File: /usr/share/man/man9/and2.9.xz 100644 root:root 6e8c9865e03bcfdc595bd574d967d617 -File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 1b88b64f118e3b379268d71741b31bb1 +File: /usr/share/man/man9/abs.9.xz 100644 root:root a22b4fab8711da02c0186ed39cdde69f +File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root febb6f2db54365dac0c43bfbedddf285 +File: /usr/share/man/man9/and2.9.xz 100644 root:root 7db5b525dee1a205d834fcf40beaa472 +File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 78f88c7c018e97a510e9d4f190074fb6 File: /usr/share/man/man9/at_pid.9.xz 100644 root:root d578fa506b91fa3aa94136679b39f656 File: /usr/share/man/man9/axis.9.xz 100644 root:root f688c161a447b4d64af5406eaa4b3c09 -File: /usr/share/man/man9/axistest.9.xz 100644 root:root 2f8cbc1d2caebe6732e371d3056d31f7 -File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 9462fd633e3a487bf99d36b734d267c3 -File: /usr/share/man/man9/biquad.9.xz 100644 root:root 491957fd8dd83018b31b58b7bcfb432a -File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 2626203d2d3a61996b3791b87a226005 -File: /usr/share/man/man9/bitwise.9.xz 100644 root:root a3c13a74493ee00f9da3cbe5bb3a607d -File: /usr/share/man/man9/bldc.9.xz 100644 root:root 06a6c5e0a6a03e4318ad5c4e47ac6a36 -File: /usr/share/man/man9/blend.9.xz 100644 root:root 75d493b0a8a1c63cd5fc305c73aa8ab1 -File: /usr/share/man/man9/carousel.9.xz 100644 root:root ca9da18ab6c299e5bdc093c73447659a -File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root c6bf5c69618a6ba5a626d835d0a04e82 -File: /usr/share/man/man9/clarke2.9.xz 100644 root:root 62256d44f480cec558b72b095e243192 -File: /usr/share/man/man9/clarke3.9.xz 100644 root:root 4149136665be4ccc22495f18f53f00e7 -File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root aa4016f17bcedf4532e33416798ba2fa +File: /usr/share/man/man9/axistest.9.xz 100644 root:root be244a6be42033680a7ac9148c0f003f +File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 1d0e814687a0747a0b7c76dbbbd3c37d +File: /usr/share/man/man9/biquad.9.xz 100644 root:root 0d99b3f10d392b89388523b083ab2f63 +File: /usr/share/man/man9/bitslice.9.xz 100644 root:root dbc1d6755c7315c78a26db2f2534d81b +File: /usr/share/man/man9/bitwise.9.xz 100644 root:root d546b6d8e89db9d763a3e8274e282ce9 +File: /usr/share/man/man9/bldc.9.xz 100644 root:root 01658a65648bb013d50c9dfa17a0dfe3 +File: /usr/share/man/man9/blend.9.xz 100644 root:root 8fb253ff660e85ada0e2883164c1c652 +File: /usr/share/man/man9/carousel.9.xz 100644 root:root 78154c70198a5af3cfae91cae9f7554a +File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root 65c5e51ad642d860f7752fa0d1eff12d +File: /usr/share/man/man9/clarke2.9.xz 100644 root:root b4b5813ae97c62d5e24ee05dd7a25843 +File: /usr/share/man/man9/clarke3.9.xz 100644 root:root cc55c3e392f22c9f1f0d3ff8e2197c7f +File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root dae20baa9bc4a7d3610c00c2b4c53c5d File: /usr/share/man/man9/classicladder.9.xz 100644 root:root 0a15b834496451ff9a41f7297f36b0f0 -File: /usr/share/man/man9/comp.9.xz 100644 root:root 593a7491a9cdc2da5fef1264acb47ef6 -File: /usr/share/man/man9/constant.9.xz 100644 root:root 532600aeb50e32c2dcd2b5546baec62f -File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root bb93e1e9f74f8dfad17a53c07743c01e -File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root efb02b95efddf8468377b279c7c98168 -File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 2bfd1f54547ce38f3353044a8f26249a -File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 8f3c4d364b122ebb0c01c1016ecdbf65 -File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root 1c7a27781c31c507b4d383130339853b -File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 8b67fd2f7709e2ed65f0ffc717cdce4e -File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 1d7109257fdfd7b8eebfc21a15ad1b23 -File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root d338dfc76bf20f2d5a3653a7e366e14f -File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root 701e6b9e989ab45673000be06af907f8 -File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root b9a5f09a40f1ec5150626e16d5c578ef -File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 22d3b105cc8af6f45367fa281ccd0669 -File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root cbe9e5830c2898546b3e42ab24929eff +File: /usr/share/man/man9/comp.9.xz 100644 root:root 55629f66d8b09ed9c53dd6e565846195 +File: /usr/share/man/man9/constant.9.xz 100644 root:root af94a93d0642ed776ccd913e2245cf40 +File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 879574c913ad425e5be7244893497dfd +File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root 6bf785dfb0769f76cd35c160f744994f +File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 6ce770d3c4f83a4deac6e4a185b14e76 +File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 2abd251eea9c9e2577b4f6e95f98b472 +File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root f99d199cafe7a685377cdd0f0c9d76e6 +File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 672c08fe8207db8f2a227d79b870c3db +File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 3bae676afbb384312999acc9035fb2e6 +File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root d0d566f22eeb72e61fe57a12ab0e8c04 +File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root 22e39a3127bb685d64020f60aa518484 +File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 026468b549be2dc4f5d1c8cd928dcc44 +File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 0c2895cfd356c4d03915d71d6bd7d7b2 +File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root b0a6f2ba44758ac8ce6a3791d0bec7fc File: /usr/share/man/man9/counter.9.xz 100644 root:root 83f81a48047a93aac54a70c298a8b8ee -File: /usr/share/man/man9/dbounce.9.xz 100644 root:root b20b633be7a93886ad9941584de4e8d4 -File: /usr/share/man/man9/ddt.9.xz 100644 root:root aa397cace25d349bcb9b575a1dd82b04 -File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 62e895402d3cec2553712c25dd4e13dd +File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 4e9e56511e9912870b048cd73e688bf8 +File: /usr/share/man/man9/ddt.9.xz 100644 root:root 7f30745dcc57e540f616580fe2286e6c +File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 3065553405df4b5ef60588ab424a4cf4 File: /usr/share/man/man9/debounce.9.xz 100644 root:root bd2406b69a89bf1c3ef92b42bfe93f3d -File: /usr/share/man/man9/demux.9.xz 100644 root:root 9ed902d3a3b30bcec4ec1411c173e2af -File: /usr/share/man/man9/differential.9.xz 100644 root:root a755356a5de26dbe0c6b0980a45fe4cc -File: /usr/share/man/man9/div2.9.xz 100644 root:root d248525e85706ccd1a2f86d80ec4ae4e -File: /usr/share/man/man9/edge.9.xz 100644 root:root 0e85151f114a557416fa09a8bfd70a37 +File: /usr/share/man/man9/demux.9.xz 100644 root:root 11c3e05df665e422fcba2e55efb571e1 +File: /usr/share/man/man9/differential.9.xz 100644 root:root 7e26ea3e054929f19165f490bedebd18 +File: /usr/share/man/man9/div2.9.xz 100644 root:root 2faae798049033356b8d0b3d48959900 +File: /usr/share/man/man9/edge.9.xz 100644 root:root d82cc17d1450c130feba5c38f99412bb File: /usr/share/man/man9/encoder.9.xz 100644 root:root 12631bc793eb57261edeccfb1868447a @@ -12566,10 +12566,10 @@ File: /usr/share/man/man9/enum.9.xz 100644 root:root 7905fd1c74115a57296cfb1da1ac3a7d -File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root ac9ee119c4df1c2bb0de700b8f235e69 -File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root d9feddf0924bea410608355f35f39af7 -File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 961206c9fd3632f99fb67e7c62ef3733 -File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root b0f93e1cef67ea37ec81e9dc8447a1bd -File: /usr/share/man/man9/flipflop.9.xz 100644 root:root 1d0e9a665bd54fc0c9d1aff9e65c35a7 -File: /usr/share/man/man9/gantry.9.xz 100644 root:root 00735d0eca7951a58a9072744f564c92 +File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 70d2ad5e969d029a19d3220f274899f5 +File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 60c2b9fadc6d49e4ddb3590ee0b98f06 +File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root c6bf60c48bf73cc6f72f3d4835265e7f +File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root d3e8cc7e3d27e2203d9b9cc1d258f65c +File: /usr/share/man/man9/flipflop.9.xz 100644 root:root 2d23b070a97b325345a6ba8e546c5cfb +File: /usr/share/man/man9/gantry.9.xz 100644 root:root 46d28edb4500f6a0e77eb98431c26090 File: /usr/share/man/man9/gantrykins.9.xz 100644 root:root a388b2c041c10d2e154213b6a190d69e -File: /usr/share/man/man9/gearchange.9.xz 100644 root:root da307b8d219a9f03249e89e48e8e6879 +File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 54b636b0af09bc052a70faec15e19e39 File: /usr/share/man/man9/genhexkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12578,6 +12578,6 @@ File: /usr/share/man/man9/gladevcp.9.xz 100644 root:root 26d85cce38cef8e5cee1a6845d897b4d -File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 5b56d913e37eeaab086e138cfcadf5c1 +File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 6cd2f8e9994a27d8e05ebffdd31907fa File: /usr/share/man/man9/hal_bb_gpio.9.xz 100644 root:root b8610c3245eb6a6a34b2071dae79effe File: /usr/share/man/man9/hal_parport.9.xz 100644 root:root 0e9862dfa7a66f23eff384631bc10a25 -File: /usr/share/man/man9/histobins.9.xz 100644 root:root c792da0110cb2860421d0c7034be49ea +File: /usr/share/man/man9/histobins.9.xz 100644 root:root fe9cc734001c7a822fccd86a47e62683 File: /usr/share/man/man9/hm2_7i43.9.xz 100644 root:root ec628cb4aadd965825a78075995c1e2e @@ -12588,54 +12588,54 @@ File: /usr/share/man/man9/hm2_spi.9.xz 100644 root:root 382b4ac9c860f7945c061b1e9bd15cdf -File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 1a0cf9c3a9a578ba8efd8bcc34cd16dc +File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 552f331cf101edd1035c77fd121045ac File: /usr/share/man/man9/hostmot2.9.xz 100644 root:root d4a99f7e9fbf5d0510c3b817a2c6756b -File: /usr/share/man/man9/hypot.9.xz 100644 root:root 7bec97769b176bb6aec9a24567f762cc -File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 0ae64f8f7bd0219a8b7387bfa68b5d3a -File: /usr/share/man/man9/integ.9.xz 100644 root:root 6164b9548ff2db15504f5ec5d8f00c65 -File: /usr/share/man/man9/invert.9.xz 100644 root:root 42f17bc58febdc7bd4820abce1b6a75e -File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root f66f0d7ec832fbbc5ff187abf296d814 +File: /usr/share/man/man9/hypot.9.xz 100644 root:root e4e33d062a8676c4596ed1b775a42498 +File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root c5b32e31e4710700e766916a14fe2ca8 +File: /usr/share/man/man9/integ.9.xz 100644 root:root d63d4a76423c8410c0dee8c55f11fc33 +File: /usr/share/man/man9/invert.9.xz 100644 root:root 1ea22849c9b2e9c417c40073ea65ca60 +File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root efdc26b405eb46ccec74e10b42ee3fb9 File: /usr/share/man/man9/kins.9.xz 100644 root:root 7ef613a8265b032556c4e99f80eeee38 -File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 4e533fd83ec241c3ca4a127387fb62a0 -File: /usr/share/man/man9/latencybins.9.xz 100644 root:root 7f7ea53a26b9028dc74d144f242b06f3 +File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 2482b22e6b9b1667c05cdf6f1c70b683 +File: /usr/share/man/man9/latencybins.9.xz 100644 root:root bd8284b5574263bcb1394337824e0726 File: /usr/share/man/man9/lcd.9.xz 100644 root:root 620cc2889dca47fa4e7586ff480ba974 -File: /usr/share/man/man9/limit1.9.xz 100644 root:root c678a2011b339332b570617b86dbf2b5 -File: /usr/share/man/man9/limit2.9.xz 100644 root:root 09edb37a7fb5dee4ebc045eb77e7d954 -File: /usr/share/man/man9/limit3.9.xz 100644 root:root 3a1e045829936b83d35ce3a5d05415fd -File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root fcb160954fb6e59289b0ec1f460f47e5 -File: /usr/share/man/man9/lincurve.9.xz 100644 root:root c5dbbb000d1a9e2a6b4244e02428008b +File: /usr/share/man/man9/limit1.9.xz 100644 root:root 819a10e4e47b3c70f9ced05507349ce5 +File: /usr/share/man/man9/limit2.9.xz 100644 root:root ff8dc282c985a390696ae604e210da03 +File: /usr/share/man/man9/limit3.9.xz 100644 root:root b867604accb86aaab54ec986503fbcf9 +File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root 061f41f84a66e96978b5f055a3494389 +File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 25b34b168ee9cf5e62eb0e9da135a2ff File: /usr/share/man/man9/lineardeltakins.9.xz 100644 root:root ce6ac2a9983a327635ddcd90d0e26def -File: /usr/share/man/man9/logic.9.xz 100644 root:root 39858c4d61d7be5318f922c012433b11 -File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 4a70c264dea4d56f47e010769fd6870d -File: /usr/share/man/man9/lut5.9.xz 100644 root:root 4bede6b89d4bfbdbb335a4b895fcde9f -File: /usr/share/man/man9/maj3.9.xz 100644 root:root 93487dd5caba947355b0edaed9d2b27a -File: /usr/share/man/man9/match8.9.xz 100644 root:root 367e9e674a480d333f77cea09f9822eb +File: /usr/share/man/man9/logic.9.xz 100644 root:root b41f48f37b8e59a2856658a42cbf32f5 +File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 4b51d53b4dc6ad57ba33611e1f4412b4 +File: /usr/share/man/man9/lut5.9.xz 100644 root:root 627b42564ab33ecc522e2ec2659732ef +File: /usr/share/man/man9/maj3.9.xz 100644 root:root 591bce73197f542745d9c9e524d5d3ea +File: /usr/share/man/man9/match8.9.xz 100644 root:root dc19528da60d61dc345110f737eef9b2 File: /usr/share/man/man9/matrix_kb.9.xz 100644 root:root 339c35c251b89cbdb7a0e83bce7035d9 -File: /usr/share/man/man9/max31855.9.xz 100644 root:root 7aa4f41cde54a1fe04f46c6f54dc7b9b +File: /usr/share/man/man9/max31855.9.xz 100644 root:root db02611f753e2faeaa4c06ffa6c8daa8 File: /usr/share/man/man9/maxkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root 78d46f80fc8e98869f5ffdbab69aa975 -File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root 7af5810998c410e71a34783a99b9d552 -File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 6012e97cc424b126848237a5c71b2aa0 -File: /usr/share/man/man9/message.9.xz 100644 root:root fcb875be0f757524afaa5dea5784a463 -File: /usr/share/man/man9/millturn.9.xz 100644 root:root 604a100a279862475b1bf79c15ccf1e9 -File: /usr/share/man/man9/minmax.9.xz 100644 root:root ee47eb523af99f4ce1ab54d4d3e2d493 +File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root b04320954bb417f5fce201f6b335682b +File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root 91ffbbcd598c77788ea66d2ad139bff6 +File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 0cbb16348a8c8327c9e7bf599ae1d67d +File: /usr/share/man/man9/message.9.xz 100644 root:root bd4e70b913cff026b9f7e4fb538bf350 +File: /usr/share/man/man9/millturn.9.xz 100644 root:root e860c66414409d167bd975b361426d3d +File: /usr/share/man/man9/minmax.9.xz 100644 root:root 93cac9a4789370a8b14b0463c6b11fab File: /usr/share/man/man9/motion.9.xz 100644 root:root 764260411c102c5aae03e9a6e6c224cf -File: /usr/share/man/man9/moveoff.9.xz 100644 root:root b297d76e60063312036c76ba0aadd818 -File: /usr/share/man/man9/mult2.9.xz 100644 root:root bf2841a7ddda275551623b750804e8ce -File: /usr/share/man/man9/multiclick.9.xz 100644 root:root ef504aca3fcc7f679332fb07639d495c -File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root e845cf1683fec2640d2c5a33bdc5d69e -File: /usr/share/man/man9/mux16.9.xz 100644 root:root 0597bc61e5baf254b6d24f5052ec705c -File: /usr/share/man/man9/mux2.9.xz 100644 root:root a25743fe817b9687371f1ae2b36bada0 -File: /usr/share/man/man9/mux4.9.xz 100644 root:root 48077853b837e3f79d55f74a058befc2 -File: /usr/share/man/man9/mux8.9.xz 100644 root:root 66f077bd2a9391688584bd8164e4fef6 +File: /usr/share/man/man9/moveoff.9.xz 100644 root:root d6f0c1f85b69505e7ede6e0b45002348 +File: /usr/share/man/man9/mult2.9.xz 100644 root:root cba573e27f214cc483d527a7e8946730 +File: /usr/share/man/man9/multiclick.9.xz 100644 root:root 815f5a7de2a11d725c960f9b9617faf1 +File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 6ce0232eef8c4b26143cd713e5536f04 +File: /usr/share/man/man9/mux16.9.xz 100644 root:root 3b6d2fecf07b552b837376bff59014b0 +File: /usr/share/man/man9/mux2.9.xz 100644 root:root 880104025f48aba19fea88eea106ff03 +File: /usr/share/man/man9/mux4.9.xz 100644 root:root 08efc5bd39448e40210a7489c4d36eee +File: /usr/share/man/man9/mux8.9.xz 100644 root:root 6360701dc61b58beaba66a843d8ab07c File: /usr/share/man/man9/mux_generic.9.xz 100644 root:root 81ed0423e2b5c893c152d9ed4491b0f5 -File: /usr/share/man/man9/near.9.xz 100644 root:root fe03463ea0cd2e8537e8832e6f7b1007 -File: /usr/share/man/man9/not.9.xz 100644 root:root 897859e83213fc7fedea35f62762fb15 -File: /usr/share/man/man9/offset.9.xz 100644 root:root 50fa78a08fe569cd38216eba40e96511 -File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 0c79a8a4b9b0532c58c0d96d86591b66 -File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 7495ce83c1edb709640537bc9840f7f5 +File: /usr/share/man/man9/near.9.xz 100644 root:root 267f58cf5f670807c39b35128b08055e +File: /usr/share/man/man9/not.9.xz 100644 root:root ecd10632d7215d25fab06982c6984759 +File: /usr/share/man/man9/offset.9.xz 100644 root:root e1d5419e9f7759e36f4bf11f064609df +File: /usr/share/man/man9/ohmic.9.xz 100644 root:root f2bcf50cea62617f0573611f0eaccb5f +File: /usr/share/man/man9/oneshot.9.xz 100644 root:root be2c11eab85e6a09608a4c6462bb9da6 File: /usr/share/man/man9/opto_ac5.9.xz 100644 root:root ed6aa04a42b4697aea2bc5fc7de8500a -File: /usr/share/man/man9/or2.9.xz 100644 root:root 25dd1c8caff7b9bf8094688204f0520a -File: /usr/share/man/man9/orient.9.xz 100644 root:root d246c273509597c11d6c30348ab8d50b +File: /usr/share/man/man9/or2.9.xz 100644 root:root f42808fe7f74d9fbfca24f11c854e9b8 +File: /usr/share/man/man9/orient.9.xz 100644 root:root 95933595aa3ae17c6423d7d920aa5ad9 File: /usr/share/man/man9/pentakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 File: /usr/share/man/man9/pid.9.xz 100644 root:root 9106a5d37a8880989de46921cdb78588 -File: /usr/share/man/man9/plasmac.9.xz 100644 root:root 12cdf46a01c264f007183a374db2fbc2 +File: /usr/share/man/man9/plasmac.9.xz 100644 root:root c73440b0671022273dd8b4d5e5ad6835 File: /usr/share/man/man9/pumakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12644,52 +12644,52 @@ File: /usr/share/man/man9/rotatekins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 80f8f36909d049ae2c78fac085b6afa7 +File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 8080572a733ec976486054e12d0b3bec File: /usr/share/man/man9/sampler.9.xz 100644 root:root 713192b4e67ac75366e7848681137025 -File: /usr/share/man/man9/scale.9.xz 100644 root:root bb663e273cfb5365db728ad5130c669d -File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root fba78a478dc69327d4f6c5e679044651 +File: /usr/share/man/man9/scale.9.xz 100644 root:root bcb2ec91bbff236b9479146f7dd90ace +File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 9bbd2ec6fd30251453d9df59eb3d7144 File: /usr/share/man/man9/scarakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/select8.9.xz 100644 root:root 80846ecf55ead3083ba06987a389f412 -File: /usr/share/man/man9/serport.9.xz 100644 root:root 29ae47105562e34d8b36e4a74987775c +File: /usr/share/man/man9/select8.9.xz 100644 root:root b2b89f4aa2246ac9ffaccfa7d24d99d1 +File: /usr/share/man/man9/serport.9.xz 100644 root:root 1dd194a40e47f33aaca60de1322be7be File: /usr/share/man/man9/setsserial.9.xz 100644 root:root a0c4c6061b229bf1b0bd7b45aa0a6d1b File: /usr/share/man/man9/siggen.9.xz 100644 root:root bb8a58ed0261c53246a616a6e5859857 -File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 737e722bcc114d8e83ea5314dcb6bcd7 +File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 10069877355da680fb77736fa864626f File: /usr/share/man/man9/sim_encoder.9.xz 100644 root:root 1061200399dc5f45100c0b9ac0b34ddc -File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 8ea7cd9f30b3fba9b80583b2b5b27596 -File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root 718e1670a8b2704ed4954132b4a69bcb -File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root a2b9085a28e66a85fa98e763ba2a5270 -File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 68d547693c4a2523dfd5460ec25e0226 -File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 084fac5b96bcc466f763a2afe6c18a6a -File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 451584207c3f91969e6584af4593c0d1 -File: /usr/share/man/man9/spindle.9.xz 100644 root:root d3c4943f199cfe2c4bbfbc4caa651fdb -File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 8b16f022af532ab7057754c18e785349 +File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root b2168f82a14d292f24853ae8905fbf45 +File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root b3d05acb3be7db17392316d011309468 +File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 4b5dd550d2e1ecb07174ea721d28110c +File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 23df0d180506c2d5dffc77a9fa9c50c2 +File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root a02b0fc0d807c05ee5691e6f687d4c57 +File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root dc49afcf73cd6356e09ba3633adb8a4f +File: /usr/share/man/man9/spindle.9.xz 100644 root:root 88c11e7e3c13cf5ef44ff95f1d524026 +File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 49f614b4ccf22abf4944e6285b6dd20b File: /usr/share/man/man9/sserial.9.xz 100644 root:root cda27ad79b3b748fe69d3aa6133dbdf9 File: /usr/share/man/man9/stepgen.9.xz 100644 root:root 1151c7075a51ad05e9e82ff643cce6a9 -File: /usr/share/man/man9/steptest.9.xz 100644 root:root 55eeb533dfed79b61d0f902b5114b630 +File: /usr/share/man/man9/steptest.9.xz 100644 root:root 524069f87a4deb1b49a46a40fdfa0968 File: /usr/share/man/man9/streamer.9.xz 100644 root:root b06007ad78a3ee158555874fe19e7b45 -File: /usr/share/man/man9/sum2.9.xz 100644 root:root d4af90466bb7c1e4d81ae8dac0e009e0 +File: /usr/share/man/man9/sum2.9.xz 100644 root:root 04d6d3a89c8a15b2b982d054443380c0 File: /usr/share/man/man9/supply.9.xz 100644 root:root 760e3e6615392513db8cc348d9c1147b -File: /usr/share/man/man9/thc.9.xz 100644 root:root 0cebaf2bcffc3c60a9a88b7faede1eb1 -File: /usr/share/man/man9/thcud.9.xz 100644 root:root 90782e3d33b9aff21d352ec230d0ff5e +File: /usr/share/man/man9/thc.9.xz 100644 root:root a06092a1ab078a2e052b00875cb2418d +File: /usr/share/man/man9/thcud.9.xz 100644 root:root f087e0d6b9c4c702429069954f891aa8 File: /usr/share/man/man9/threads.9.xz 100644 root:root 0a89f5af89b5cdf6d132fcfb19ba8726 -File: /usr/share/man/man9/threadtest.9.xz 100644 root:root 4271e73499cbf645a0962282fe0c7302 -File: /usr/share/man/man9/time.9.xz 100644 root:root 5797ce8ef6ff67aa02568ac1623f106e -File: /usr/share/man/man9/timedelay.9.xz 100644 root:root a44591db30202b0478c3f54ece01c3f4 -File: /usr/share/man/man9/timedelta.9.xz 100644 root:root fa76f2bc1638890363337f3fa8a5da78 -File: /usr/share/man/man9/tof.9.xz 100644 root:root 384c2f3cf14ba32af49aa55ef327de02 -File: /usr/share/man/man9/toggle.9.xz 100644 root:root 9fe29a347331415b4c545fbb95dcbf83 -File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root e23250764da969ac24e44095b5a56ebb -File: /usr/share/man/man9/ton.9.xz 100644 root:root 1a04f2c80e6d008167b5854d660d20b7 -File: /usr/share/man/man9/tp.9.xz 100644 root:root b55d4da92c482bc3396b77f690bdd2fd -File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 6e4a178d8e812b4d60ea22afcc523b48 +File: /usr/share/man/man9/threadtest.9.xz 100644 root:root a2c0f0bc29dfef08c7f9193fca4f977e +File: /usr/share/man/man9/time.9.xz 100644 root:root 7e666f7c5b50a7f9af03a420a5ec547c +File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 661c8edc9b880d8fcc6f4b6016e188f3 +File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 872e9482bd1394438b52e3a146a208bd +File: /usr/share/man/man9/tof.9.xz 100644 root:root 7bb43c27a6ff19c6131522fa71f09bc9 +File: /usr/share/man/man9/toggle.9.xz 100644 root:root 221b62c402cb8d92a000d1fd2b819b71 +File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 8c0b0aaba6151d95c7babc3a2d56ead5 +File: /usr/share/man/man9/ton.9.xz 100644 root:root 7105d81a727bc4b52d5690dba65c4c67 +File: /usr/share/man/man9/tp.9.xz 100644 root:root b70aa0ffb6d77b4cfc38e68fbf21d7b8 +File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 36d05c269a69627792066eb6cfed4d86 File: /usr/share/man/man9/tripodkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root ef1c46eb7c61dedafb34cfeb2caad86c -File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root 52b405b9cfc44376aca502466e45f7ce +File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 36de97421f330480e2143cdcb12c876c +File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root 0b95d9a4cbf2ed4c3f9c67ce9f412650 File: /usr/share/man/man9/trivkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/updown.9.xz 100644 root:root cb39d98eb03fa549ceeb7e871cc1d614 -File: /usr/share/man/man9/userkins.9.xz 100644 root:root 3002e4fc7c9816909ed1e469cfdacc63 +File: /usr/share/man/man9/updown.9.xz 100644 root:root 54a26ae14628d8ce8429e7794de595d2 +File: /usr/share/man/man9/userkins.9.xz 100644 root:root 6bb7bf8610958b689d302203cfa1ce0e File: /usr/share/man/man9/watchdog.9.xz 100644 root:root 3ccf8bb1e89f95bd9212dab04d95b193 -File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 167b630748a206f2e2e8c9d04fa3009d +File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 2044452884f2cef5d5764bd16b86573f File: /usr/share/man/man9/weighted_sum.9.xz 100644 root:root eb6db3b792484b220170ad1fd6fce770 -File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root c5ff26b0198251fc062097120f8d4300 -File: /usr/share/man/man9/xor2.9.xz 100644 root:root db2e77069aecbdc9dabe87458b123012 -File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root 3dab1e8ab65eac153bbf410e4adc34de +File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root d2ce858f0fbf1fca8c1e33ca4df6a8ce +File: /usr/share/man/man9/xor2.9.xz 100644 root:root 1a2c84c5381d9899b4b8fadd6a2e7b07 +File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root 7bfa0704991f125bd691544e592b1cd3 File: /usr/share/qtvcp 40755 root:root @@ -13647,2 +13647,2 @@ File: /usr/share/qtvcp/widgets_ui/virtual_keyboard.ui 100644 root:root e757c13d9a96b2fb641409c70442ded6 -RPMIdentity: 4b0e12a74c392935237482512dfa476e5f0da178796a8e6bd3bc1114a53e2bf2fab72e0974cf1ff6fa46ff68f6388d3270524d9feb9c11caced3d8d02a5da83a +RPMIdentity: 5fe89f25dbb64f6315db98e44688d7952b1872434b774748c2da2f104dfa23e6a2eca1d6f740aa081426febf90f4a8a0c777b51c23c3ad280c9dd7f77631669c --- linuxcnc-debuginfo-2.9.2-alt3.20240203.i586.rpm.repo 2024-03-02 20:03:16.000000000 +0000 +++ linuxcnc-debuginfo-2.9.2-alt3.20240203.i586.rpm.hasher 2024-04-13 08:14:32.800123735 +0000 @@ -70,2 +70,4 @@ /usr/lib/debug/.build-id/26 40755 root:root +/usr/lib/debug/.build-id/26/7da77541befee6c25a43813d0836fb04e9bfb7 120777 root:root ../../../../bin/halscope +/usr/lib/debug/.build-id/26/7da77541befee6c25a43813d0836fb04e9bfb7.debug 120777 root:root ../../usr/bin/halscope.debug /usr/lib/debug/.build-id/26/8f0deeb357fbfec164599f1f5fb7ac05cc2a3f 120777 root:root ../../../linuxcnc/modules/spindle_monitor.so @@ -206,4 +208,2 @@ /usr/lib/debug/.build-id/54 40755 root:root -/usr/lib/debug/.build-id/54/c13e09b9049b5df70d84d313162b2505afd97c 120777 root:root ../../../python3/site-packages/_togl.so -/usr/lib/debug/.build-id/54/c13e09b9049b5df70d84d313162b2505afd97c.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug /usr/lib/debug/.build-id/54/c58d6c19e5289361a57d46d4fed8bc3de050ae 120777 root:root ../../../linuxcnc/modules/xyzbc-trt-kins.so @@ -216,2 +216,4 @@ /usr/lib/debug/.build-id/58 40755 root:root +/usr/lib/debug/.build-id/58/578d1175fd1323b2061e460043f6b6080cd540 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so +/usr/lib/debug/.build-id/58/578d1175fd1323b2061e460043f6b6080cd540.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug /usr/lib/debug/.build-id/58/77e0d2c9c45eaab4d395a694fc95a573f2403d 120777 root:root ../../../linuxcnc/modules/estop_latch.so @@ -302,2 +304,4 @@ /usr/lib/debug/.build-id/84 40755 root:root +/usr/lib/debug/.build-id/84/26b87c6aead8288eeb8bcd0476492c81fcd76f 120777 root:root ../../../../bin/classicladder +/usr/lib/debug/.build-id/84/26b87c6aead8288eeb8bcd0476492c81fcd76f.debug 120777 root:root ../../usr/bin/classicladder.debug /usr/lib/debug/.build-id/84/58859daf69c239b3ca706bf1481d4a32deec6f 120777 root:root ../../../linuxcnc/modules/thc.so @@ -386,4 +390,2 @@ /usr/lib/debug/.build-id/a6/8b8680f5bb3690a35131eb6fd5aceee7fa341f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/or2.so.debug -/usr/lib/debug/.build-id/a6/f5c41d9036a0f8328b4a1fa502a8cfcd2cfba0 120777 root:root ../../../../bin/halmeter -/usr/lib/debug/.build-id/a6/f5c41d9036a0f8328b4a1fa502a8cfcd2cfba0.debug 120777 root:root ../../usr/bin/halmeter.debug /usr/lib/debug/.build-id/a8 40755 root:root @@ -417,4 +419,2 @@ /usr/lib/debug/.build-id/b5 40755 root:root -/usr/lib/debug/.build-id/b5/7e6f87e2d353b0c04ed1cc467a75168821635a 120777 root:root ../../../../bin/classicladder -/usr/lib/debug/.build-id/b5/7e6f87e2d353b0c04ed1cc467a75168821635a.debug 120777 root:root ../../usr/bin/classicladder.debug /usr/lib/debug/.build-id/b5/be2bcac935bf2eaa75932d7ec1eb6aa1cbc612 120777 root:root ../../../linuxcnc/modules/plasmac.so @@ -426,2 +426,5 @@ /usr/lib/debug/.build-id/b6/edef90032c851e44252de9a1400ae9fa2a0192.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_float.so.debug +/usr/lib/debug/.build-id/b8 40755 root:root +/usr/lib/debug/.build-id/b8/ea73805f1c1e6f5e33559914a05ab3aa5ef815 120777 root:root ../../../../bin/halmeter +/usr/lib/debug/.build-id/b8/ea73805f1c1e6f5e33559914a05ab3aa5ef815.debug 120777 root:root ../../usr/bin/halmeter.debug /usr/lib/debug/.build-id/b9 40755 root:root @@ -505,5 +508,2 @@ /usr/lib/debug/.build-id/d2/e2bcf83e76e5401009a239537f9a26f1bfae78.debug 120777 root:root ../../usr/lib/python3/site-packages/rotarydeltakins.so.debug -/usr/lib/debug/.build-id/d4 40755 root:root -/usr/lib/debug/.build-id/d4/88236607a6f543402af0b56340a1f535eaf948 120777 root:root ../../../../bin/halscope -/usr/lib/debug/.build-id/d4/88236607a6f543402af0b56340a1f535eaf948.debug 120777 root:root ../../usr/bin/halscope.debug /usr/lib/debug/.build-id/d5 40755 root:root @@ -513,5 +513,2 @@ /usr/lib/debug/.build-id/d5/6a292ba6c834886d1229aa877e5f025a5e7666.debug 120777 root:root ../../usr/bin/linuxcncrsh.debug -/usr/lib/debug/.build-id/d6 40755 root:root -/usr/lib/debug/.build-id/d6/7386ab330c038bf7921c39e23dfeb6d47d594a 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so -/usr/lib/debug/.build-id/d6/7386ab330c038bf7921c39e23dfeb6d47d594a.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug /usr/lib/debug/.build-id/d8 40755 root:root @@ -577,2 +574,5 @@ /usr/lib/debug/.build-id/f2/e2d2d57608f1868dd4d5052ebe6a1c09d3128a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotatekins.so.debug +/usr/lib/debug/.build-id/f3 40755 root:root +/usr/lib/debug/.build-id/f3/f116b2f601ad3830104793eef018d45891479d 120777 root:root ../../../python3/site-packages/_togl.so +/usr/lib/debug/.build-id/f3/f116b2f601ad3830104793eef018d45891479d.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug /usr/lib/debug/.build-id/f4 40755 root:root @@ -1592,2 +1592,4 @@ File: /usr/lib/debug/.build-id/26 40755 root:root +File: /usr/lib/debug/.build-id/26/7da77541befee6c25a43813d0836fb04e9bfb7 120777 root:root ../../../../bin/halscope +File: /usr/lib/debug/.build-id/26/7da77541befee6c25a43813d0836fb04e9bfb7.debug 120777 root:root ../../usr/bin/halscope.debug File: /usr/lib/debug/.build-id/26/8f0deeb357fbfec164599f1f5fb7ac05cc2a3f 120777 root:root ../../../linuxcnc/modules/spindle_monitor.so @@ -1728,4 +1730,2 @@ File: /usr/lib/debug/.build-id/54 40755 root:root -File: /usr/lib/debug/.build-id/54/c13e09b9049b5df70d84d313162b2505afd97c 120777 root:root ../../../python3/site-packages/_togl.so -File: /usr/lib/debug/.build-id/54/c13e09b9049b5df70d84d313162b2505afd97c.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug File: /usr/lib/debug/.build-id/54/c58d6c19e5289361a57d46d4fed8bc3de050ae 120777 root:root ../../../linuxcnc/modules/xyzbc-trt-kins.so @@ -1738,2 +1738,4 @@ File: /usr/lib/debug/.build-id/58 40755 root:root +File: /usr/lib/debug/.build-id/58/578d1175fd1323b2061e460043f6b6080cd540 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so +File: /usr/lib/debug/.build-id/58/578d1175fd1323b2061e460043f6b6080cd540.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug File: /usr/lib/debug/.build-id/58/77e0d2c9c45eaab4d395a694fc95a573f2403d 120777 root:root ../../../linuxcnc/modules/estop_latch.so @@ -1824,2 +1826,4 @@ File: /usr/lib/debug/.build-id/84 40755 root:root +File: /usr/lib/debug/.build-id/84/26b87c6aead8288eeb8bcd0476492c81fcd76f 120777 root:root ../../../../bin/classicladder +File: /usr/lib/debug/.build-id/84/26b87c6aead8288eeb8bcd0476492c81fcd76f.debug 120777 root:root ../../usr/bin/classicladder.debug File: /usr/lib/debug/.build-id/84/58859daf69c239b3ca706bf1481d4a32deec6f 120777 root:root ../../../linuxcnc/modules/thc.so @@ -1908,4 +1912,2 @@ File: /usr/lib/debug/.build-id/a6/8b8680f5bb3690a35131eb6fd5aceee7fa341f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/or2.so.debug -File: /usr/lib/debug/.build-id/a6/f5c41d9036a0f8328b4a1fa502a8cfcd2cfba0 120777 root:root ../../../../bin/halmeter -File: /usr/lib/debug/.build-id/a6/f5c41d9036a0f8328b4a1fa502a8cfcd2cfba0.debug 120777 root:root ../../usr/bin/halmeter.debug File: /usr/lib/debug/.build-id/a8 40755 root:root @@ -1939,4 +1941,2 @@ File: /usr/lib/debug/.build-id/b5 40755 root:root -File: /usr/lib/debug/.build-id/b5/7e6f87e2d353b0c04ed1cc467a75168821635a 120777 root:root ../../../../bin/classicladder -File: /usr/lib/debug/.build-id/b5/7e6f87e2d353b0c04ed1cc467a75168821635a.debug 120777 root:root ../../usr/bin/classicladder.debug File: /usr/lib/debug/.build-id/b5/be2bcac935bf2eaa75932d7ec1eb6aa1cbc612 120777 root:root ../../../linuxcnc/modules/plasmac.so @@ -1948,2 +1948,5 @@ File: /usr/lib/debug/.build-id/b6/edef90032c851e44252de9a1400ae9fa2a0192.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_float.so.debug +File: /usr/lib/debug/.build-id/b8 40755 root:root +File: /usr/lib/debug/.build-id/b8/ea73805f1c1e6f5e33559914a05ab3aa5ef815 120777 root:root ../../../../bin/halmeter +File: /usr/lib/debug/.build-id/b8/ea73805f1c1e6f5e33559914a05ab3aa5ef815.debug 120777 root:root ../../usr/bin/halmeter.debug File: /usr/lib/debug/.build-id/b9 40755 root:root @@ -2027,5 +2030,2 @@ File: /usr/lib/debug/.build-id/d2/e2bcf83e76e5401009a239537f9a26f1bfae78.debug 120777 root:root ../../usr/lib/python3/site-packages/rotarydeltakins.so.debug -File: /usr/lib/debug/.build-id/d4 40755 root:root -File: /usr/lib/debug/.build-id/d4/88236607a6f543402af0b56340a1f535eaf948 120777 root:root ../../../../bin/halscope -File: /usr/lib/debug/.build-id/d4/88236607a6f543402af0b56340a1f535eaf948.debug 120777 root:root ../../usr/bin/halscope.debug File: /usr/lib/debug/.build-id/d5 40755 root:root @@ -2035,5 +2035,2 @@ File: /usr/lib/debug/.build-id/d5/6a292ba6c834886d1229aa877e5f025a5e7666.debug 120777 root:root ../../usr/bin/linuxcncrsh.debug -File: /usr/lib/debug/.build-id/d6 40755 root:root -File: /usr/lib/debug/.build-id/d6/7386ab330c038bf7921c39e23dfeb6d47d594a 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so -File: /usr/lib/debug/.build-id/d6/7386ab330c038bf7921c39e23dfeb6d47d594a.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug File: /usr/lib/debug/.build-id/d8 40755 root:root @@ -2099,2 +2096,5 @@ File: /usr/lib/debug/.build-id/f2/e2d2d57608f1868dd4d5052ebe6a1c09d3128a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotatekins.so.debug +File: /usr/lib/debug/.build-id/f3 40755 root:root +File: /usr/lib/debug/.build-id/f3/f116b2f601ad3830104793eef018d45891479d 120777 root:root ../../../python3/site-packages/_togl.so +File: /usr/lib/debug/.build-id/f3/f116b2f601ad3830104793eef018d45891479d.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug File: /usr/lib/debug/.build-id/f4 40755 root:root @@ -2130,3 +2130,3 @@ File: /usr/lib/debug/.build-id/ff/51514eabd5b03df863be04c6ed9ba118c074fb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/maxkins.so.debug -File: /usr/lib/debug/usr/bin/classicladder.debug 100644 root:root cfadf07c98522560c54465723da91181 +File: /usr/lib/debug/usr/bin/classicladder.debug 100644 root:root 4b10bb50cf5e8c94ffd66422cef1de12 File: /usr/lib/debug/usr/bin/genserkins.debug 100644 root:root ffbef9d94cd2534b6b4cb0ada303cf25 @@ -2134,6 +2134,6 @@ File: /usr/lib/debug/usr/bin/halcmd.debug 100644 root:root 66563b767fb94359a7710304a13c319b -File: /usr/lib/debug/usr/bin/halmeter.debug 100644 root:root 7d8ae3862304cb998e124183ab9b78dc +File: /usr/lib/debug/usr/bin/halmeter.debug 100644 root:root 5c7a767fa246b447279d4456cfa1f382 File: /usr/lib/debug/usr/bin/halrmt.debug 100644 root:root 118928848e3151d96dedab59498bcbfb File: /usr/lib/debug/usr/bin/halsampler.debug 100644 root:root 35930caefef374346126dcb8818bdbf9 -File: /usr/lib/debug/usr/bin/halscope.debug 100644 root:root a5fec5f1260781f5e69b48af88f5c6e4 +File: /usr/lib/debug/usr/bin/halscope.debug 100644 root:root 9b370e9d5b74a2fa920b0274c5d4089f File: /usr/lib/debug/usr/bin/halstreamer.debug 100644 root:root 81b805b4d2c8eb2c67c5ae57f8177b94 @@ -2355,3 +2355,3 @@ File: /usr/lib/debug/usr/lib/python3/site-packages/_hal.so.debug 100644 root:root f63094dac4dcf737fb4836991adcbc10 -File: /usr/lib/debug/usr/lib/python3/site-packages/_togl.so.debug 100644 root:root 88198cc35ad4b8973e18ca530a7dadb0 +File: /usr/lib/debug/usr/lib/python3/site-packages/_togl.so.debug 100644 root:root 2a8efa151ee3f4b7d739e72d0622e555 File: /usr/lib/debug/usr/lib/python3/site-packages/gcode.so.debug 100644 root:root f30d92fcdeab839f82495fab8753cc2c @@ -2363,3 +2363,3 @@ File: /usr/lib/debug/usr/lib/tcl/linuxcnc/hal.so.debug 100644 root:root e3531df99375e4ff490aa508c7faf9ea -File: /usr/lib/debug/usr/lib/tcl/linuxcnc/linuxcnc.so.debug 100644 root:root f1faff9534a4b3fbbc0973288f700e98 +File: /usr/lib/debug/usr/lib/tcl/linuxcnc/linuxcnc.so.debug 100644 root:root 068dfeba3906500858b049fe50870e3c File: /usr/src/debug/linuxcnc-2.9.2 40755 root:root @@ -2828,3 +2828,3 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 7c8b93c92dd26204a5b944ff5d835cee +File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 8ed5da963124c92c77bd5da56f37c390 File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.comp 100644 root:root 36db960cdfb47870d04dc0825e67fbe5 @@ -2839,3 +2839,3 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 545ebe98c3852e5dd4764d46dc80fe8c +File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 5d5667917c0e947ca8e509c01564694e File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.comp 100644 root:root 59df738983b6701d52519fdd79609b2f @@ -2886,127 +2886,127 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs.c 100644 root:root 357525ca667592be4a27a8f6c3167d8f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs_s32.c 100644 root:root 9ef7a6a8e319b3b7358055f57e4e3c46 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/and2.c 100644 root:root adc244c8dd827cf2ecb17a7941128ee2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/anglejog.c 100644 root:root 80d607d5c8e4195cfdc15d3aa9443450 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/axistest.c 100644 root:root 271aad9f147f9648a300af39ec0eabb9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bin2gray.c 100644 root:root 649cb7c843f88bb23e8b065351dacff8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/biquad.c 100644 root:root 0bd5c8f3fe67cd605cf1fa4d271ae058 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitslice.c 100644 root:root 90bf0abfd51f786fd620e8484a930f76 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitwise.c 100644 root:root 4838808ce278ef2de75569fa99eee561 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bldc.c 100644 root:root 03889a36d533b51e6093b30a442299c2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/blend.c 100644 root:root 036e8b3590d6cba9afe852555cf64807 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/carousel.c 100644 root:root 4af77dd513c74f7185eb7d7cc6190dc3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/charge_pump.c 100644 root:root 67912156f05b3ee47f8cb540d93c49eb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke2.c 100644 root:root da92b7296c5bd91f2401eb060e4d5066 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke3.c 100644 root:root 514aefc15d84550cb407bf33dde4532c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarkeinv.c 100644 root:root 05b5ddb1e8acecee8fe61815b92fb5c1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/comp.c 100644 root:root 7cb85d182b14492ed3894a73e29d98f4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/constant.c 100644 root:root b9005cbc9fc1c444f3e2a800d0529e9f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_float.c 100644 root:root bd8844bf5c82b45d78fcc86e0ecf42f1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_s32.c 100644 root:root 6a2cbf4b77b9a28a14433cadcc13ba89 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_u32.c 100644 root:root af644d49872edc848d68bacdd4aae4cc -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_s32.c 100644 root:root 4921771cb168f04281a38e52a0470c62 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_u32.c 100644 root:root fefaf43be5b7b0be379b5be7436544e2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_bit.c 100644 root:root 530bb0c1d1e01f4f22a66078f8b9517f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_float.c 100644 root:root 613a316c50dcf5c196d7698729bd86c6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_u32.c 100644 root:root c44e92d8a8598480f397dfd3fbf8134a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_bit.c 100644 root:root 988e9cdf2e31c5da3be9e46ddc5442af -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_float.c 100644 root:root 616476b53b5fc51ec3c3e52acb97042e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_s32.c 100644 root:root 4052c6a9732739885656e172afe8193d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/corexy_by_hal.c 100644 root:root 9bffc4947f1c7fa413299fe4a1d1cc28 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/dbounce.c 100644 root:root 0002022fc8c023e3c5e6ec87b7d9a4ef -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ddt.c 100644 root:root 2e32eb5ce9579d212dc10aa124632e13 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/deadzone.c 100644 root:root 710bede5cf32e6164016b6f9bfc37cce -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/demux.c 100644 root:root 4b7aa0a05b60340325f6d2f3239516d4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/differential.c 100644 root:root f99567c844c7b667b2186fbda6cfa12e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/div2.c 100644 root:root 1abd3e528be6ddec15cc028db382c3fb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/edge.c 100644 root:root 31fc64b2f2ae0538f52f702f39740c9f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/eoffset_per_angle.c 100644 root:root f22dc43084bcace4508a1a978981172e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/estop_latch.c 100644 root:root 4e0b533e2c6631081af323568adbc3a0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/feedcomp.c 100644 root:root 3ae9717eb48318a9f250015ba98d9509 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/filter_kalman.c 100644 root:root 0d0480824570bd25363508fe40038151 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/flipflop.c 100644 root:root 76cf32ee02504471cd49e0791db2b5c6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gantry.c 100644 root:root 43f055c30a8d3511b70a4ecd9146b68b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gearchange.c 100644 root:root b3e231da930d7ed627d27759ba73efd8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gray2bin.c 100644 root:root 610fc3ccad23e24894362f6356e9e4be -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/histobins.c 100644 root:root ad7028546be3043db89a800c448427a6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/homecomp.c 100644 root:root 52b8652ed574bf0f3d32ebd93c782d55 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/hypot.c 100644 root:root c587f317f8bbbede170788ddd4cd6653 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ilowpass.c 100644 root:root 9b63f43b8c35a5cfcf98b7c07280379c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/integ.c 100644 root:root ad21b6f0709c80556f7d13ef92d839e3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/invert.c 100644 root:root 380a44e446742364183f70fcaec91b1a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/joyhandle.c 100644 root:root f6a2421ed0d006bdd088e6590e408505 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/knob2float.c 100644 root:root 3dee502357b0e29b1c081272b1b1c65a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/latencybins.c 100644 root:root ba268fc711e922cad9e572b3be543803 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit1.c 100644 root:root a47294cff2430027cf3bd9d535fef6ad -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit2.c 100644 root:root 3470ae58922f156e614f52a6aeadc6ac -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit3.c 100644 root:root 67a4352915ed02a132064fe8ac0a9ba8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit_axis.c 100644 root:root 1d4a2f9bcd7f567415f7f2eadeec0a92 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lincurve.c 100644 root:root df82d13fe792174b05938af895ff79fd -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/logic.c 100644 root:root 04ef3d0db2e7ad0941001046739335bf -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lowpass.c 100644 root:root 263cbbf5312457515a346e393cfe3c70 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lut5.c 100644 root:root 1f9afd83767a027b536bc26a2fc4a9a3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/maj3.c 100644 root:root 1fd9403f030590d61acc22b50bb555c3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/match8.c 100644 root:root 94cb3f4da5bef68ddc00e41bdb328ec4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/max31855.c 100644 root:root 3fe852d4ae84f61a48829da406607869 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 98aa372a6ed6f7868efe768695d54e7b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/message.c 100644 root:root 9d59355234b11d4fcaf7133f267e2dee -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/millturn.c 100644 root:root 759b4fd4d71526c5887f6e57e22801c7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/minmax.c 100644 root:root cff4ef3edee35fcd7ad5b34b826df38c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/moveoff.c 100644 root:root 85922e4bbd876e0438561bf4fb960ed2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mult2.c 100644 root:root 3aea764aa60acee3626ccac69403eec7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiclick.c 100644 root:root b503f5b77dc2ac3367f0876334943860 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiswitch.c 100644 root:root 6f12ec838a3ab772ac3852f19f8bdd10 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux16.c 100644 root:root 33238bf9a66899267169ca7520dfbe54 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux2.c 100644 root:root f331de410fa78d0bd00cc9e6cc949844 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux4.c 100644 root:root 8f811c957d710ccb5279f052a83238e1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux8.c 100644 root:root 19c9221076d96308ffe9914baa65d05b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/near.c 100644 root:root f95dc5cb2eaa782c142cf5c07f25e22a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/not.c 100644 root:root ea11d484264c9e19ee3d6bb0f1a93f6c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/offset.c 100644 root:root 9dd712560a054b5db52733d330445ef3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ohmic.c 100644 root:root bec4301e694f87486c428dcf2cc2e8f7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/oneshot.c 100644 root:root 5e49b739beb32b89f4b48fd99adb0ac6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/or2.c 100644 root:root 23051dccce43de8d602eee884f0f2bf8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/orient.c 100644 root:root f9c11d225e83f34d9b40a4b359c94368 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/plasmac.c 100644 root:root 79dccd9dcca2e1dcf0fdb8c3f13e8ce5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sample_hold.c 100644 root:root b25186cb288669c30141f6d18cac90b6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scale.c 100644 root:root b2a7299cca58db978f4e38a81c2230ce -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scaled_s32_sums.c 100644 root:root ec81be685deda32637db0062f4c69296 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/select8.c 100644 root:root 48caa49eabdfb6e2574aa2780a2ccc83 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_axis_hardware.c 100644 root:root 6ea5da029706220c3852f8c77f4de67a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_home_switch.c 100644 root:root 180686875cbfe6ab04ec64f03c8c1a52 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 4b21d7e213431ee5aa5119adeddd9879 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_parport.c 100644 root:root aafdd55809bb30a109cb4874ba7e78ee -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_spindle.c 100644 root:root 7f706d2292f136784240ee125c6814d4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/simple_tp.c 100644 root:root af960d8add4d04c47a5b819a2450ab4e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sphereprobe.c 100644 root:root 2c82115e0f42ddc09f5dbdb6af26a55c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle.c 100644 root:root 6c41f016a0eefa8e6f004b2f239ab97a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle_monitor.c 100644 root:root f4d09baa1998a1179e0e6701cb7167f5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/steptest.c 100644 root:root f55b3555a163af8a5bd0e82b45fb2b02 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sum2.c 100644 root:root 03ea4221b121c51f3e9af0a811c5359c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thc.c 100644 root:root f3178237ac6905a18a01fd8ad2b71d2b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thcud.c 100644 root:root 3723d74941a948428f4bd1e291652501 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/threadtest.c 100644 root:root 2546519430a25dd64bfc6bdaed10478b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/time.c 100644 root:root 8717811674abef5c340af88b9665b923 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelay.c 100644 root:root 6daa426cffe4ce05fdb0c59ef6c5da78 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelta.c 100644 root:root 7d253587e316dfcf2ed730395253609d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tof.c 100644 root:root 8728ae92b30eb718fb9c3e7c3a3135d0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle.c 100644 root:root 57bc97146ff924a0343dfda189c0e190 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle2nist.c 100644 root:root 6452ba04d62b693b4161730dbeb398c8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ton.c 100644 root:root 1765bb92493e79ae820679bf164344f4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tp.c 100644 root:root d085275544551b2be19dcf6de792f5e6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_bit.c 100644 root:root 0069445a6a792293554c69dfb3678c50 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_float.c 100644 root:root 4d3d1424dc8227fbd6cb8e9d6187101e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/updown.c 100644 root:root 2dc1255e0e085520281c2c6cfc00931a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/userkins.c 100644 root:root a0d84cea6e95a22ad389ece2861e0638 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/wcomp.c 100644 root:root 5dd99add9bc6176510fdf3170bdcad5d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xhc_hb04_util.c 100644 root:root f982419d70017288beb71fd9315e492f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xor2.c 100644 root:root ac447b181001548623a1a13c901df32d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root f1a5864b23b1c53df9217fff7c81381b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs.c 100644 root:root 6cae3ca5bc811963a60e9abc29f6143c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs_s32.c 100644 root:root 33a6d03080cbb2b06c87b2541ecf689f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/and2.c 100644 root:root fc32390eea8456ce229c4ff5d8ede6ad +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/anglejog.c 100644 root:root 7ce9e1ab08073c1d11227996f379409f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/axistest.c 100644 root:root 4df2138e6fb088a873d8f0c087766d15 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bin2gray.c 100644 root:root 253865952e867c216b40eb665697771a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/biquad.c 100644 root:root db3de2553f5d3ef274d342230c2bada1 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitslice.c 100644 root:root ac100b4bbfce32249cdd58656ad25783 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitwise.c 100644 root:root e6b11f4d85e846e6f89c244f68a48c30 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bldc.c 100644 root:root 89148fd07af0c9ba2791d957f51bc115 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/blend.c 100644 root:root 4cf5cf18aa8e66e9949dae414fb25b01 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/carousel.c 100644 root:root a97858b3553fa57a27a53b920cb76336 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/charge_pump.c 100644 root:root ffecfaf6fd1b085e92479c4d5fbbe310 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke2.c 100644 root:root 7a6d8e56608f6d366533e15ed7f0e698 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke3.c 100644 root:root f222b6837bb2fa79261701aca36b0754 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarkeinv.c 100644 root:root 160725177840d7e97bbd8a4dfc137969 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/comp.c 100644 root:root bee5e25787bccfb927b994eaf02bc9bd +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/constant.c 100644 root:root 3cc5359a0ebdbbe4f0cd72535b6809a2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_float.c 100644 root:root 86eecbe89d710719a85b015def84e938 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_s32.c 100644 root:root 577780fa8baeba928f8bb133723c16c1 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_u32.c 100644 root:root dc70ec37869dd8a3841510723fffdbce +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_s32.c 100644 root:root a2597c119aec27360e09d063288aabed +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_u32.c 100644 root:root 0ff2b3f36dec836da5bb6e5c91313c3f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_bit.c 100644 root:root 643463026fe7b7abc3fef640c2a6a553 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_float.c 100644 root:root 4274bce68730f14b0b08d6d900031b61 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_u32.c 100644 root:root f30cac9a3f82b28b75ab0e9f02ed312f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_bit.c 100644 root:root 91b45a287ab45675a8b40dbde6a35b65 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_float.c 100644 root:root f96764b90bbe8cf8802a34c0333934cd +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_s32.c 100644 root:root 01ee6c3b6cb53cb79fd7fda0d85aca53 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/corexy_by_hal.c 100644 root:root b88b057b1086b1f340d7f1b356353817 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/dbounce.c 100644 root:root ca6c1c2602e50705dfbbc49008dc6bf0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ddt.c 100644 root:root 775cbeeb8a96c4c3e8f925af69e9e9a7 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/deadzone.c 100644 root:root 508a595675c4e99fc63528741b63ae49 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/demux.c 100644 root:root 91d7a9232a0e3f1161914541c777648b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/differential.c 100644 root:root 9953916d130c8347d71052af23f0ea29 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/div2.c 100644 root:root c3e38509a82385d35b9bc289198998af +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/edge.c 100644 root:root 7cc806819a7e53a0344fc3c84c328d5e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/eoffset_per_angle.c 100644 root:root ff95e96d878d99933153d2fa5cfda48c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/estop_latch.c 100644 root:root 1084a1e6d0ec6787bb3a0b952e6b99d4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/feedcomp.c 100644 root:root 2f15c1741a8bba820efff2316a59b420 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/filter_kalman.c 100644 root:root 36073448244cee0ab0d6416952811198 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/flipflop.c 100644 root:root 79910c30a60f48c857a200f3c459b720 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gantry.c 100644 root:root 07aac3db632f531dbdb64523c0a1af82 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gearchange.c 100644 root:root db56c8217b0e610541ebd98f914a67d3 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gray2bin.c 100644 root:root 456f831afafd3da253754649486642d6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/histobins.c 100644 root:root 017389fa033f2f81368d95a9f07334c8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/homecomp.c 100644 root:root d1fb9cd1a15889d634dbe9968cd95944 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/hypot.c 100644 root:root f4c783911404b3a72d328e7837bf749a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ilowpass.c 100644 root:root 2795096ecb0e67b91f967e0acd9f7e79 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/integ.c 100644 root:root 24376a099fe13c0b469d34baa6286240 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/invert.c 100644 root:root ea80bd534bfbeb7f7a902869dfe8a919 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/joyhandle.c 100644 root:root 2bf5cd912f00895aae00ffc2c1734751 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/knob2float.c 100644 root:root 01e84600b5aaeb90618ca0e4cb004fb0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/latencybins.c 100644 root:root 056bf0dfc0eb0f4f94c95ce8a95c5390 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit1.c 100644 root:root 9da67f1a9d3e10063a4983f61d191ae3 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit2.c 100644 root:root f7bf296c9902fa6456c4325b8101d0b6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit3.c 100644 root:root c623e5508e8cacc4cf74580536fe9a4c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit_axis.c 100644 root:root a6c65dfe8e63111524661d255d0a4fee +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lincurve.c 100644 root:root 98f5460d521a94ac7c7920ef51bfb032 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/logic.c 100644 root:root ab761313ef43ed2b79a9bc502bb24cf2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lowpass.c 100644 root:root 07b01cfa037b3849d2310554182203db +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lut5.c 100644 root:root 316413801a479d7453a317376bce03b9 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/maj3.c 100644 root:root 4f86cbe375b73d934a5219ff22e17210 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/match8.c 100644 root:root 503f51183688a11f55fc86545722af72 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/max31855.c 100644 root:root 970f8adb8eb9b9f806e2bac4a21e01fd +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root b8a815a72545544696ec9fba496c3781 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/message.c 100644 root:root 2b5cb090aa89c0909e72086be7a115cb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/millturn.c 100644 root:root 3668413a9956ddd678049d3951639fb6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/minmax.c 100644 root:root 5e8051a338817097bc28fa3f08b3cf80 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/moveoff.c 100644 root:root 717c71d0836bf3fe88bda99247d039cd +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mult2.c 100644 root:root b78c57e1a2fdd672f7c6fca0c718aabb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiclick.c 100644 root:root 3ae38e10730e77ebf9312382bf4bd611 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiswitch.c 100644 root:root 408b88003283bebc5d115f482313b453 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux16.c 100644 root:root 0196e445b3e2384e0f4c17600bcb3d4d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux2.c 100644 root:root c69054c2ef96872f1b5e052340090ede +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux4.c 100644 root:root 42896fe70a61545032b91757b8ca2861 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux8.c 100644 root:root e4b4d6c616a5f405f7ac633799377c26 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/near.c 100644 root:root 6a3db4e9b9a4b8a4197e9905f6eae138 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/not.c 100644 root:root 3c0adc7f15268b9a4e03b6385a4f7325 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/offset.c 100644 root:root 9da6c9d1b2e9cc0ea674a5c4e1fafb76 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ohmic.c 100644 root:root 2e7c4e7fabbc30dffb1f7e7a081d0796 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/oneshot.c 100644 root:root 84745f0847a09216e6facfe81966304b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/or2.c 100644 root:root 80015b3d77fa9fa23eb9c858866c0e3d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/orient.c 100644 root:root e97d7b6280b7f8f9b7456cc57a828be0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/plasmac.c 100644 root:root c0b4a4d3b58c9b37aa48f3258d689908 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sample_hold.c 100644 root:root 35aeffac69779ed87e278f670ec7db98 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scale.c 100644 root:root 894509be10dfbdfb44f32d52e6d6fc8e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 6d041bf908e0d50beb912b17d9eba690 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/select8.c 100644 root:root f002fba66ba489b2ac9ed9c181bfde2a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_axis_hardware.c 100644 root:root 5a5e77030e96dfec7b86bdc8e0f570ca +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_home_switch.c 100644 root:root 0173871e9462f8e66a7236d576189edc +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_matrix_kb.c 100644 root:root e2dc04de57efa5ec42766fafe9314d5e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_parport.c 100644 root:root 6ab961efd36d68a09716ed106747933f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_spindle.c 100644 root:root b46484f685f77e9f9277811304f581a2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/simple_tp.c 100644 root:root 2d04de06bded3841b8b2da34e56b8808 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sphereprobe.c 100644 root:root 68ab49c86bbc3c85e0e5e98236fae716 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle.c 100644 root:root 788cb3243c5028e0f92491dc39f644af +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle_monitor.c 100644 root:root 22c8adc220442a6d17b475eafe529321 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/steptest.c 100644 root:root 46b52bdddbc0e126a33750d356842381 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sum2.c 100644 root:root e8e6a7979f15a60167bcf926a7787327 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thc.c 100644 root:root e90a0e171c9cb5ed1129b02e1a726abb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thcud.c 100644 root:root 925dd9d1fd9ebec17478efea7790c802 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/threadtest.c 100644 root:root a1b59374e5d4fc9d1ca59a6e9b7cd678 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/time.c 100644 root:root e7b834b509d7a86086839d7a61537fa2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelay.c 100644 root:root 5ca9c459f28b294aba86f2c4aaaa810b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelta.c 100644 root:root 739730638051ee69e5a15470bc720e72 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tof.c 100644 root:root b35cd2893748447ca433235bbb0a8c6b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle.c 100644 root:root 34f00ca39db91d1507ef0624fe47a9bf +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle2nist.c 100644 root:root 55e01cfeee028fdfa67fc2595833a8ba +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ton.c 100644 root:root 349c62458a2dd6630ffc62707b74ad3e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tp.c 100644 root:root d3fc3971606b203edd70870e8bc5fd4f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_bit.c 100644 root:root eea337ae8f67bc7b59992ea0c21b5590 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_float.c 100644 root:root dd63f01793a27b87de88b9c4bc6f4002 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/updown.c 100644 root:root 8e375f15718d8f76cd1f8007779fb59c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/userkins.c 100644 root:root 4420dbd24a8559b8ed2712ba87c93b1c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/wcomp.c 100644 root:root 8a22f9d6ab9e4c5c136c71fa315d9307 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xhc_hb04_util.c 100644 root:root 5fc81a568434775e88b21ce184047f96 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xor2.c 100644 root:root d7ea2f3cfb1b3a2941ce7ed74f8bd021 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 9b74241a900b8c4aff34989ec139d421 File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 342812489ae70759eac0700442d51363 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_uart.c 100644 root:root adff06e758b039a93e6027e2371ce9c4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/serport.c 100644 root:root f73b921eb8d41949a53ee19647f3be8f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 3211b91987474d01036f672e9ce73534 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_uart.c 100644 root:root 0ee3d4696f7f35999e95a86eae1613ad +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/serport.c 100644 root:root 7b2526ef4103b0210e2962f845a0dee0 File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps/thermistor.c 100644 root:root 39bfd210d126ea968bb73ea6fbaa07c0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps/thermistor.c 100644 root:root db57a932dec6f644671713eda0aa7fae File: /usr/src/debug/linuxcnc-2.9.2/src/rtapi 40755 root:root @@ -3021,2 +3021,2 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/rtapi/uspace_rtapi_string.c 100644 root:root e93709d53c7b25f0358ac01589652a43 -RPMIdentity: 443645f17f6c7f6e5d51eb95bdc5b6c0dd4dd60fe30f1081bb9beee0c14b45100015d334dc2e96b00a90833de8ca2d9736416adf33f232067c9813a4754fdc97 +RPMIdentity: 1f176a9f2dd27920af03f0f89723aedcf39fd8e17a0055a03534b621af190f6e38f844ac43565165df1b09687d01a24ab2d88d1f9730f957aca19792833a3e6a