<86>Nov 11 07:24:06 userdel[3911772]: delete user 'rooter' <86>Nov 11 07:24:06 userdel[3911772]: removed group 'rooter' owned by 'rooter' <86>Nov 11 07:24:06 groupadd[3911808]: group added to /etc/group: name=rooter, GID=1217 <86>Nov 11 07:24:06 groupadd[3911808]: group added to /etc/gshadow: name=rooter <86>Nov 11 07:24:06 groupadd[3911808]: new group: name=rooter, GID=1217 <86>Nov 11 07:24:06 useradd[3911867]: new user: name=rooter, UID=1217, GID=1217, home=/root, shell=/bin/bash, from=none <86>Nov 11 07:24:06 userdel[3911916]: delete user 'builder' <86>Nov 11 07:24:06 userdel[3911916]: removed group 'builder' owned by 'builder' <86>Nov 11 07:24:06 userdel[3911916]: removed shadow group 'builder' owned by 'builder' <86>Nov 11 07:24:06 groupadd[3911977]: group added to /etc/group: name=builder, GID=1218 <86>Nov 11 07:24:06 groupadd[3911977]: group added to /etc/gshadow: name=builder <86>Nov 11 07:24:06 groupadd[3911977]: new group: name=builder, GID=1218 <86>Nov 11 07:24:06 useradd[3911995]: new user: name=builder, UID=1218, GID=1218, home=/usr/src, shell=/bin/bash, from=none <13>Nov 11 07:24:17 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432033 installed <13>Nov 11 07:24:17 rpmi: libgdbm-1.8.3-alt10 sisyphus+278100.1600.1.1 1626059138 installed <13>Nov 11 07:24:17 rpmi: libexpat-2.5.0-alt1 sisyphus+309227.100.1.1 1667075766 installed <13>Nov 11 07:24:17 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962878 installed <13>Nov 11 07:24:17 rpmi: libp11-kit-1:0.25.2-alt1 sisyphus+333434.100.1.1 1698941048 installed <13>Nov 11 07:24:17 rpmi: libtasn1-4.19.0-alt3 sisyphus+327816.100.1.1 1692802618 installed <13>Nov 11 07:24:17 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Nov 11 07:24:17 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Nov 11 07:24:17 rpmi: ca-certificates-2023.07.31-alt1 sisyphus+326137.200.1.1 1690809798 installed <13>Nov 11 07:24:17 rpmi: ca-trust-0.1.4-alt1 sisyphus+308690.100.1.1 1666182992 installed <13>Nov 11 07:24:17 rpmi: p11-kit-trust-1:0.25.2-alt1 sisyphus+333434.100.1.1 1698941048 installed <13>Nov 11 07:24:17 rpmi: libcrypto3-3.1.4-alt1 sisyphus+332632.100.2.1 1698241305 installed <13>Nov 11 07:24:17 rpmi: libssl3-3.1.4-alt1 sisyphus+332632.100.2.1 1698241305 installed <13>Nov 11 07:24:17 rpmi: python3-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 11 07:24:18 rpmi: python3-base-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 11 07:24:18 rpmi: python3-module-py3dephell-0.1.0-alt2 sisyphus+328191.600.5.1 1693609196 installed <13>Nov 11 07:24:18 rpmi: tests-for-installed-python3-pkgs-0.1.24-alt2 sisyphus+331059.100.4.1 1696870033 installed <13>Nov 11 07:24:18 rpmi: rpm-build-python3-0.1.24-alt2 sisyphus+331059.100.4.1 1696870033 installed <13>Nov 11 07:24:18 rpmi: rpm-build-tcl-0.6.2-alt1 sisyphus+299320.100.1.1 1651401392 installed <13>Nov 11 07:24:25 rpmi: xorg-proto-devel-2023.2-alt1.1 sisyphus+330960.100.2.1 1696609218 installed <13>Nov 11 07:24:25 rpmi: libjpeg-2:2.1.5.1-alt1 sisyphus+333833.100.5.3 1699464361 installed <13>Nov 11 07:24:25 rpmi: libpng16-1.6.40-alt1 sisyphus+323732.100.1.1 1687771859 installed <13>Nov 11 07:24:25 rpmi: libwayland-client-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 11 07:24:25 rpmi: libatk-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 11 07:24:25 rpmi: libglvnd-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 11 07:24:25 rpmi: libboost_system1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:25 rpmi: xml-utils-1:2.10.4-alt1 sisyphus+311250.4140.175.1 1685629210 installed <13>Nov 11 07:24:25 rpmi: liblcms2-2.15-alt1 sisyphus+316039.100.1.1 1677666336 installed <13>Nov 11 07:24:25 rpmi: perl-HTTP-Date-6.06-alt1 sisyphus+324527.100.1.1 1688834564 installed <13>Nov 11 07:24:25 rpmi: perl-XML-NamespaceSupport-1.12-alt1 1491296348 installed <13>Nov 11 07:24:25 rpmi: zlib-devel-1.2.13-alt1 sisyphus+309409.200.2.1 1667402045 installed <13>Nov 11 07:24:25 rpmi: python3-module-pkg_resources-1:68.2.2-alt1 sisyphus+329927.100.2.1 1695208272 installed <13>Nov 11 07:24:26 rpmi: libtcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Nov 11 07:24:26 rpmi: tcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Nov 11 07:24:26 rpmi: libwebp7-1.3.2-alt1 sisyphus+329541.100.1.1 1694676226 installed <13>Nov 11 07:24:26 rpmi: libICE-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Nov 11 07:24:26 rpmi: libfribidi-1.0.13-alt1 sisyphus+320646.100.1.1 1684307083 installed <13>Nov 11 07:24:26 rpmi: libSM-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Nov 11 07:24:26 rpmi: rpm-build-gir-0.7.3-alt3.1 sisyphus+319393.100.1.1 1682538783 installed <13>Nov 11 07:24:26 rpmi: libepoxy-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Nov 11 07:24:26 rpmi: libusb-1.0.26-alt2 sisyphus+305525.100.1.1 1660924428 installed <13>Nov 11 07:24:26 rpmi: libopenblas-0.3.23-alt1.2 sisyphus+325749.100.1.1 1690531820 installed <13>Nov 11 07:24:26 rpmi: libwayland-server-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 11 07:24:26 rpmi: perl-LWP-MediaTypes-6.04-alt1 sisyphus+225468.100.1.1 1553186684 installed <13>Nov 11 07:24:26 rpmi: perl-Compress-Raw-Zlib-2.206-alt1 sisyphus+325780.100.1.1 1690558898 installed <13>Nov 11 07:24:26 rpmi: perl-libnet-1:3.15-alt1 sisyphus+317310.100.1.1 1679580208 installed <13>Nov 11 07:24:26 rpmi: perl-XML-SAX-Base-1.09-alt1 1494364363 installed <13>Nov 11 07:24:26 rpmi: gtk-builder-convert-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Nov 11 07:24:26 rpmi: python3-module-Pygments-2.16.1-alt1 sisyphus+326610.100.1.1 1691406169 installed <13>Nov 11 07:24:26 rpmi: libsqlite3-3.42.0-alt1 sisyphus+321513.100.1.1 1684603061 installed <13>Nov 11 07:24:26 rpmi: libnspr-1:4.35-alt1 sisyphus+308164.100.1.1 1665397042 installed <13>Nov 11 07:24:27 rpmi: libicu73-1:7.3.2-alt1.1 sisyphus+333271.100.1.1 1698773686 installed <13>Nov 11 07:24:27 rpmi: libkmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Nov 11 07:24:27 rpmi: libquadmath0-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 11 07:24:27 rpmi: libgomp1-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 11 07:24:27 rpmi: libltdl7-2.4.7-alt4 sisyphus+333358.100.1.1 1698858596 installed <13>Nov 11 07:24:27 rpmi: libopenjpeg2.0-2.5.0-alt1 sisyphus+299926.300.3.1 1652478844 installed <13>Nov 11 07:24:27 rpmi: libverto-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Nov 11 07:24:27 rpmi: libcom_err-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Nov 11 07:24:27 rpmi: libgraphite2-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Nov 11 07:24:27 rpmi: libXau-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Nov 11 07:24:27 rpmi: libXau-devel-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Nov 11 07:24:27 rpmi: libgraphite2-devel-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Nov 11 07:24:27 rpmi: libcom_err-devel-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Nov 11 07:24:27 rpmi: libverto-devel-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Nov 11 07:24:27 rpmi: libraw-0.21.1-alt1 sisyphus+314571.100.5.1 1693994530 installed <13>Nov 11 07:24:27 rpmi: libquadmath13-devel-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 11 07:24:27 rpmi: libquadmath-devel-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Nov 11 07:24:27 rpmi: libgfortran5-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 11 07:24:27 rpmi: kmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Nov 11 07:24:27 rpmi: icu-utils-1:7.3.2-alt1.1 sisyphus+333271.100.1.1 1698773686 installed <13>Nov 11 07:24:27 rpmi: libicu-devel-1:7.3.2-alt1.1 sisyphus+333271.100.1.1 1698773686 installed <13>Nov 11 07:24:28 rpmi: libnss-3.94.0-alt1 sisyphus+330862.100.1.2 1696335687 installed <13>Nov 11 07:24:28 rpmi: python3-module-nss-1.0.1-alt6 sisyphus+311250.15200.175.1 1685633048 installed <13>Nov 11 07:24:28 rpmi: libICE-devel-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Nov 11 07:24:28 rpmi: libSM-devel-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Nov 11 07:24:28 rpmi: tcl-devel-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Nov 11 07:24:28 rpmi: libpng-devel-1.6.40-alt1 sisyphus+323732.100.1.1 1687771859 installed <13>Nov 11 07:24:28 rpmi: perl-File-Listing-6.16-alt1 sisyphus+325783.100.1.1 1690559356 installed <13>Nov 11 07:24:28 rpmi: libboost_atomic1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:28 rpmi: libboost_contract1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:28 rpmi: libboost_chrono1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:28 rpmi: libboost_timer1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:28 rpmi: libboost_thread1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:28 rpmi: libboost_type_erasure1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:28 rpmi: libOpenGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 11 07:24:28 rpmi: libGLES-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 11 07:24:28 rpmi: libwayland-cursor-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 11 07:24:28 rpmi: libwayland-egl-4:18.1.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 11 07:24:28 rpmi: groff-base-1.22.3-alt2 sisyphus+275306.100.2.1 1624538359 installed <13>Nov 11 07:24:28 rpmi: libpipeline-1.5.7-alt1_1 sisyphus+312433.100.1.1 1671879776 installed <13>Nov 11 07:24:28 rpmi: libmodbus-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Nov 11 07:24:28 rpmi: openldap-common-2.6.6-alt1 sisyphus+330946.100.2.1 1696432854 installed <13>Nov 11 07:24:28 rpmi: wayland-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 11 07:24:28 rpmi: libwayland-client-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 11 07:24:28 rpmi: libxkbcommon-1.6.0-alt1 sisyphus+331300.100.1.1 1696855236 installed <13>Nov 11 07:24:28 rpmi: libgudev-1:238-alt1 sisyphus+324364.100.1.1 1688646145 installed <13>Nov 11 07:24:28 rpmi: libboost_python3-1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:28 rpmi: libxblas-1.0.248-alt2 sisyphus+285045.40.2.1 1631388462 installed <13>Nov 11 07:24:28 rpmi: liblapack-1:3.8.0-alt7 sisyphus+293726.100.1.1 1642544503 installed <13>Nov 11 07:24:29 rpmi: python3-module-numpy-1:1.25.2-alt1 sisyphus+326215.100.2.1 1691052232 installed <13>Nov 11 07:24:29 rpmi: libboost_numpy3-1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:29 rpmi: libxshmfence-1.3.2-alt1 sisyphus+311428.400.1.1 1670577529 installed <13>Nov 11 07:24:29 rpmi: libpciaccess-1:0.17-alt1 sisyphus+308663.300.1.1 1666168262 installed <13>Nov 11 07:24:29 rpmi: libdrm-1:2.4.117-alt1 sisyphus+332488.100.1.1 1698045111 installed <13>Nov 11 07:24:29 rpmi: less-633-alt1 sisyphus+328181.300.2.1 1693321749 installed <13>Nov 11 07:24:29 rpmi: perl-Try-Tiny-0.31-alt1 sisyphus+290597.100.1.1 1637915507 installed <13>Nov 11 07:24:29 rpmi: perl-IO-Socket-IP-0.42-alt1 sisyphus+325815.100.1.2 1690571193 installed <13>Nov 11 07:24:29 rpmi: perl-Module-Load-0.36-alt1 sisyphus+258992.100.1.1 1601543407 installed <13>Nov 11 07:24:29 rpmi: perl-Compress-Raw-Bzip2-2.206-alt1 sisyphus+325779.100.1.1 1690558767 installed <13>Nov 11 07:24:29 rpmi: perl-IO-Compress-Brotli-2:0.004001-alt3 sisyphus+302124.100.1.1 1655283098 installed <13>Nov 11 07:24:29 rpmi: perl-Clone-0.46-alt1 sisyphus+308850.100.1.3 1666451819 installed <13>Nov 11 07:24:29 rpmi: perl-HTML-Tagset-3.20-alt2 1317725093 installed <13>Nov 11 07:24:29 rpmi: perl-Term-ANSIColor-5.01-alt1 sisyphus+244783.100.1.2 1579747505 installed <13>Nov 11 07:24:29 rpmi: perl-Data-Dump-1.25-alt1 sisyphus+276551.100.1.1 1625126880 installed <13>Nov 11 07:24:29 rpmi: perl-Filter-1.64-alt1 sisyphus+305464.100.1.1 1660815328 installed <13>Nov 11 07:24:29 rpmi: perl-Encode-3.19-alt1 sisyphus+304776.100.1.1 1659623414 installed <13>Nov 11 07:24:29 rpmi: perl-URI-5.21-alt1 sisyphus+327918.100.1.1 1692972838 installed <13>Nov 11 07:24:29 rpmi: perl-IO-Compress-2.206-alt1 sisyphus+325819.100.1.1 1690563199 installed <13>Nov 11 07:24:29 rpmi: perl-Net-HTTP-6.23-alt1 sisyphus+323470.100.1.1 1687422469 installed <13>Nov 11 07:24:29 rpmi: perl-HTML-Parser-3.81-alt1 sisyphus+314462.100.1.1 1675193797 installed <13>Nov 11 07:24:29 rpmi: perl-WWW-RobotRules-6.02-alt1 1329756211 installed <13>Nov 11 07:24:29 rpmi: perl-Encode-Locale-1.05-alt1 1444608613 installed <13>Nov 11 07:24:29 rpmi: perl-IO-HTML-1.004-alt1 sisyphus+258983.100.1.1 1601542619 installed <13>Nov 11 07:24:29 rpmi: perl-HTTP-Message-6.45-alt1 sisyphus+330728.100.1.1 1696162276 installed <13>Nov 11 07:24:29 rpmi: perl-HTTP-Negotiate-6.01-alt1 1329760563 installed <13>Nov 11 07:24:29 rpmi: perl-libwww-6.72-alt1 sisyphus+325791.100.1.2 1690563984 installed <13>Nov 11 07:24:29 rpmi: perl-XML-LibXML-2.0209-alt1 sisyphus+325808.100.1.2 1690570830 installed <13>Nov 11 07:24:29 rpmi: perl-XML-SAX-1.02-alt1 sisyphus+232322.100.1.1 1560758406 installed <13>Nov 11 07:24:29 rpmi: perl-XML-Simple-2.25-alt2 sisyphus+257498.100.1.1 1599324034 installed <13>Nov 11 07:24:29 rpmi: icon-naming-utils-0.8.90-alt1 sisyphus+276851.100.1.1 1625243947 installed <13>Nov 11 07:24:29 rpmi: icon-theme-adwaita-45.0-alt1 sisyphus+325066.500.6.2 1695203960 installed <13>Nov 11 07:24:29 rpmi: perl-XML-Parser-2.46-alt1 sisyphus+279723.1300.1.1 1626649160 installed <13>Nov 11 07:24:29 rpmi: usbids-20230825-alt1 sisyphus+327952.100.1.1 1693025831 installed <13>Nov 11 07:24:29 rpmi: pciids-20230922-alt1 sisyphus+330116.100.1.1 1695424341 installed <13>Nov 11 07:24:29 rpmi: hwdata-0.374-alt1 sisyphus+329322.100.1.1 1694450297 installed <13>Nov 11 07:24:29 rpmi: gtk+3-themes-incompatible-3.20-alt3 1461944560 installed <13>Nov 11 07:24:29 rpmi: python3-module-zipp-3.17.0-alt1 sisyphus+330459.100.2.1 1695891920 installed <13>Nov 11 07:24:29 rpmi: python3-module-importlib-metadata-6.8.0-alt1 sisyphus+325197.100.2.1 1689870041 installed <13>Nov 11 07:24:29 rpmi: python3-module-markdown-3.5.1-alt1 sisyphus+333338.100.3.1 1698863238 installed <13>Nov 11 07:24:29 rpmi: python3-module-polib-1.1.1-alt1 sisyphus+282657.100.1.1 1628954165 installed <13>Nov 11 07:24:29 rpmi: python3-module-click-8.1.7-alt1 sisyphus+327424.100.2.1 1695395098 installed <13>Nov 11 07:24:29 rpmi: python3-module-zope.interface-6.0-alt1 sisyphus+326348.600.4.1 1691597456 installed <13>Nov 11 07:24:29 rpmi: python3-module-chameleon.core-4.2.0-alt1 sisyphus+330407.100.1.1 1695735099 installed <13>Nov 11 07:24:29 rpmi: python3-module-lingua-4.15.0-alt2 sisyphus+304052.100.1.1 1658352892 installed <13>Nov 11 07:24:30 rpmi: python3-module-babel-1:2.12.1-alt1 sisyphus+317409.100.1.1 1679678193 installed <13>Nov 11 07:24:30 rpmi: python3-module-markupsafe-1:2.1.3-alt1 sisyphus+323659.100.1.1 1687595160 installed <13>Nov 11 07:24:30 rpmi: python3-module-pycparser-2.21-alt1.1 sisyphus+309935.7300.4.1 1668527005 installed <13>Nov 11 07:24:30 rpmi: python3-module-cffi-1.16.0-alt1 sisyphus+330935.100.2.1 1696495706 installed <13>Nov 11 07:24:30 rpmi: python3-module-cryptography-41.0.5-alt1 sisyphus+333239.200.1.1 1698754471 installed <13>Nov 11 07:24:30 rpmi: python3-module-beaker-1.12.1-alt1 sisyphus+319143.100.1.1 1682256768 installed <13>Nov 11 07:24:30 rpmi: python3-module-mako-1.2.4-alt2 sisyphus+319351.100.1.1 1682510722 installed <13>Nov 11 07:24:30 rpmi: libffi-devel-1:3.4.2-alt2 sisyphus+287629.100.2.1 1634659534 installed <13>Nov 11 07:24:30 rpmi: gcc-c++-common-1.4.27-alt1 sisyphus+278099.1300.1.1 1626028636 installed <13>Nov 11 07:24:31 rpmi: libstdc++13-devel-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 11 07:24:32 rpmi: gcc13-c++-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 11 07:24:32 rpmi: libpython3-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 11 07:24:32 rpmi: libncurses6-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Nov 11 07:24:32 rpmi: libtinfo-devel-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Nov 11 07:24:32 rpmi: libncurses-devel-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Nov 11 07:24:33 rpmi: python3-dev-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 11 07:24:33 rpmi: python3-module-setuptools-1:68.2.2-alt1 sisyphus+329927.100.2.1 1695208272 installed <13>Nov 11 07:24:33 rpmi: glib2-devel-2.78.1-alt1 sisyphus+332710.100.1.2 1698249935 installed <13>Nov 11 07:24:33 rpmi: libatk-devel-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 11 07:24:33 rpmi: libdevmapper-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>Nov 11 07:24:33 rpmi: mount-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <13>Nov 11 07:24:33 rpmi: losetup-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <13>Nov 11 07:24:33 rpmi: lsblk-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <86>Nov 11 07:24:33 groupadd[3942546]: group added to /etc/group: name=tape, GID=999 <86>Nov 11 07:24:33 groupadd[3942546]: group added to /etc/gshadow: name=tape <86>Nov 11 07:24:33 groupadd[3942546]: new group: name=tape, GID=999 <86>Nov 11 07:24:33 groupadd[3942553]: group added to /etc/group: name=dialout, GID=998 <86>Nov 11 07:24:33 groupadd[3942553]: group added to /etc/gshadow: name=dialout <86>Nov 11 07:24:33 groupadd[3942553]: new group: name=dialout, GID=998 <86>Nov 11 07:24:33 groupadd[3942563]: group added to /etc/group: name=input, GID=997 <86>Nov 11 07:24:33 groupadd[3942563]: group added to /etc/gshadow: name=input <86>Nov 11 07:24:33 groupadd[3942563]: new group: name=input, GID=997 <86>Nov 11 07:24:33 groupadd[3942569]: group added to /etc/group: name=video, GID=996 <86>Nov 11 07:24:33 groupadd[3942569]: group added to /etc/gshadow: name=video <86>Nov 11 07:24:33 groupadd[3942569]: new group: name=video, GID=996 <86>Nov 11 07:24:33 groupadd[3942577]: group added to /etc/group: name=render, GID=995 <86>Nov 11 07:24:33 groupadd[3942577]: group added to /etc/gshadow: name=render <86>Nov 11 07:24:33 groupadd[3942577]: new group: name=render, GID=995 <86>Nov 11 07:24:33 groupadd[3942584]: group added to /etc/group: name=sgx, GID=994 <86>Nov 11 07:24:33 groupadd[3942584]: group added to /etc/gshadow: name=sgx <86>Nov 11 07:24:33 groupadd[3942584]: new group: name=sgx, GID=994 <13>Nov 11 07:24:33 rpmi: udev-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Nov 11 07:24:34 rpmi: dmsetup-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>Nov 11 07:24:34 rpmi: dconf-profile-0.1-alt1 sisyphus+325633.340.3.1 1690415358 installed <13>Nov 11 07:24:34 rpmi: boost-python-headers-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_context1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_fiber1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_stacktrace1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_nowide1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_url1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_test1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_serialization1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_random1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_iostreams1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_json1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_regex1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_graph1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_date_time1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:34 rpmi: libboost_container1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:36 rpmi: boost-devel-headers-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696508918 installed <13>Nov 11 07:24:36 rpmi: boost-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:36 rpmi: libgc-8.2.4-alt2 sisyphus+322425.100.2.1 1686551121 installed <13>Nov 11 07:24:36 rpmi: libmaa-1.4.7-alt5 sisyphus+310700.100.1.1 1669563759 installed <13>Nov 11 07:24:36 rpmi: dict-1:1.13.1-alt1 sisyphus+290985.100.1.1 1638223911 installed <13>Nov 11 07:24:36 rpmi: w3m-0.5.3-alt4.git20200502 sisyphus+328124.5000.1.1 1693253320 installed <13>Nov 11 07:24:36 rpmi: sgml-common-0.6.3-alt15 sisyphus+276099.100.1.1 1624817971 installed <13>Nov 11 07:24:36 rpmi: docbook-dtds-4.5-alt1 sisyphus+276837.100.1.1 1625242123 installed <13>Nov 11 07:24:36 rpmi: docbook-style-xsl-1.79.1-alt4 sisyphus+232871.100.1.1 1561238010 installed <13>Nov 11 07:24:36 rpmi: libxslt-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Nov 11 07:24:36 rpmi: xsltproc-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Nov 11 07:24:36 rpmi: asciidoc-9.1.0-alt2 sisyphus+282906.100.1.1 1629104440 installed <13>Nov 11 07:24:36 rpmi: libImageMagick7-common-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Nov 11 07:24:36 rpmi: libwmflite-0.2.8.4-alt13 sisyphus+275127.100.1.1 1624406848 installed <13>Nov 11 07:24:36 rpmi: liblqr-0.4.2-alt1 sisyphus+276247.100.1.2 1624927462 installed <13>Nov 11 07:24:36 rpmi: libjbig2.1-2.1-alt2 sisyphus+326386.40.6.1 1691148232 installed <13>Nov 11 07:24:36 rpmi: djvu-common-3.5.28-alt2 sisyphus+297715.100.1.1 1648887081 installed <13>Nov 11 07:24:36 rpmi: libdjvu-3.5.28-alt2 sisyphus+297715.100.1.1 1648887083 installed <13>Nov 11 07:24:36 rpmi: libgts-0.7.6-alt2.drc20130205.1 sisyphus+275722.100.1.1 1624749871 installed <13>Nov 11 07:24:36 rpmi: libpaper-1.1.28-alt4 sisyphus+325501.100.1.1 1690226536 installed <13>Nov 11 07:24:36 rpmi: liblmdb-0.9.31-alt1 sisyphus+330946.40.2.1 1696431544 installed <13>Nov 11 07:24:36 rpmi: libkeyutils-1.6.3-alt1 sisyphus+266061.100.1.1 1612919567 installed <86>Nov 11 07:24:36 groupadd[3944698]: group added to /etc/group: name=_keytab, GID=993 <86>Nov 11 07:24:36 groupadd[3944698]: group added to /etc/gshadow: name=_keytab <86>Nov 11 07:24:36 groupadd[3944698]: new group: name=_keytab, GID=993 <13>Nov 11 07:24:36 rpmi: libkrb5-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <86>Nov 11 07:24:36 groupadd[3944989]: group added to /etc/group: name=sasl, GID=992 <86>Nov 11 07:24:36 groupadd[3944989]: group added to /etc/gshadow: name=sasl <86>Nov 11 07:24:36 groupadd[3944989]: new group: name=sasl, GID=992 <13>Nov 11 07:24:36 rpmi: libsasl2-3-2.1.27-alt2.2 sisyphus+324359.6000.12.1 1689392231 installed <13>Nov 11 07:24:36 rpmi: libldap2-2.6.6-alt1 sisyphus+330946.100.2.1 1696432858 installed <13>Nov 11 07:24:36 rpmi: libkrb5-ldap-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <13>Nov 11 07:24:36 rpmi: libkrb5-devel-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <13>Nov 11 07:24:36 rpmi: libtirpc-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Nov 11 07:24:36 rpmi: liblz4-1:1.9.4-alt1 sisyphus+309416.100.1.1 1667413000 installed <13>Nov 11 07:24:36 rpmi: libsystemd-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Nov 11 07:24:37 rpmi: libdbus-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <13>Nov 11 07:24:37 rpmi: libavahi-0.8-alt2 sisyphus+321176.300.10.2 1684803998 installed <13>Nov 11 07:24:37 rpmi: libcups-2.4.7-alt2 sisyphus+333092.100.1.1 1698654164 installed <13>Nov 11 07:24:37 rpmi: dbus-tools-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <86>Nov 11 07:24:37 groupadd[3945413]: group added to /etc/group: name=messagebus, GID=991 <86>Nov 11 07:24:37 groupadd[3945413]: group added to /etc/gshadow: name=messagebus <86>Nov 11 07:24:37 groupadd[3945413]: new group: name=messagebus, GID=991 <86>Nov 11 07:24:37 useradd[3945438]: new user: name=messagebus, UID=999, GID=991, home=/run/dbus, shell=/dev/null, from=none <13>Nov 11 07:24:37 rpmi: dbus-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <13>Nov 11 07:24:37 rpmi: icon-theme-hicolor-0.17-alt2 sisyphus+248343.100.1.1 1584979043 installed <13>Nov 11 07:24:37 rpmi: libgtk+2-locales-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Nov 11 07:24:37 rpmi: libnuma-2.0.14-alt2 sisyphus+278485.100.1.1 1626104243 installed <13>Nov 11 07:24:37 rpmi: libx265-199-3.5-alt1.1 sisyphus+277560.100.1.1 1625696944 installed <13>Nov 11 07:24:37 rpmi: libdeflate-1.19-alt1 sisyphus+329822.100.2.2 1695269332 installed <13>Nov 11 07:24:37 rpmi: libtiff5-4.4.0-alt4 sisyphus+322581.100.1.2 1686180093 installed <13>Nov 11 07:24:37 rpmi: libgdk-pixbuf-locales-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Nov 11 07:24:37 rpmi: libde265-1.0.12-alt1 sisyphus+329539.100.1.1 1694672072 installed <13>Nov 11 07:24:37 rpmi: libaom3-3.5.0-alt1 sisyphus+312085.100.1.1 1671551781 installed <13>Nov 11 07:24:37 rpmi: libdatrie-0.2.13-alt1_7 sisyphus+328221.100.1.1 1693336967 installed <13>Nov 11 07:24:37 rpmi: libthai-0.1.29-alt1_6 sisyphus+328230.100.1.2 1693348044 installed <13>Nov 11 07:24:37 rpmi: desktop-file-utils-0.26-alt6 sisyphus+331944.100.1.3 1697550035 installed <13>Nov 11 07:24:37 rpmi: shared-mime-info-2.3-alt1 sisyphus+331248.100.1.1 1696723964 installed <13>Nov 11 07:24:37 rpmi: gsettings-desktop-schemas-data-45.0-alt1 sisyphus+325066.400.6.2 1695203930 installed <13>Nov 11 07:24:37 rpmi: libgio-2.78.1-alt1 sisyphus+332710.100.1.2 1698249935 installed <13>Nov 11 07:24:37 rpmi: gsettings-desktop-schemas-45.0-alt1 sisyphus+325066.400.6.2 1695203930 installed <13>Nov 11 07:24:37 rpmi: libgdk-pixbuf-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Nov 11 07:24:37 rpmi: gobject-introspection-1.78.1-alt1.3 sisyphus+331651.500.5.1 1698260136 installed <13>Nov 11 07:24:37 rpmi: libgio-devel-2.78.1-alt1 sisyphus+332710.100.1.2 1698249935 installed <13>Nov 11 07:24:37 rpmi: libgdk-pixbuf-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Nov 11 07:24:37 rpmi: gobject-introspection-x11-1.78.1-alt1.3 sisyphus+331651.500.5.1 1698260136 installed <13>Nov 11 07:24:38 rpmi: gobject-introspection-devel-1.78.1-alt1.3 sisyphus+331651.500.5.1 1698260136 installed <13>Nov 11 07:24:38 rpmi: libatk-gir-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 11 07:24:38 rpmi: libgdk-pixbuf-gir-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Nov 11 07:24:38 rpmi: libheif-1.17.3-alt1 sisyphus+334006.100.1.1 1699522000 installed <13>Nov 11 07:24:38 rpmi: gtk4-update-icon-cache-4.12.3-alt1 sisyphus+330542.100.1.1 1695913166 installed <13>Nov 11 07:24:38 rpmi: libgdk-pixbuf-gir-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Nov 11 07:24:38 rpmi: libatk-gir-devel-2.50.0-alt1 sisyphus+329802.300.1.1 1694991397 installed <13>Nov 11 07:24:38 rpmi: libdconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Nov 11 07:24:38 rpmi: dconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Nov 11 07:24:38 rpmi: libgtk+3-schemas-3.24.38-alt1 sisyphus+321614.100.1.1 1684749819 installed <13>Nov 11 07:24:38 rpmi: libjson-glib-1.8.0-alt1 sisyphus+325066.600.6.2 1695204016 installed <13>Nov 11 07:24:38 rpmi: libgusb-0.4.8-alt1 sisyphus+333854.100.1.1 1699389324 installed <13>Nov 11 07:24:38 rpmi: libcolord-1.4.6-alt1 sisyphus+296000.100.1.1 1646050423 installed <13>Nov 11 07:24:38 rpmi: libpolkit-0.120-alt1.qa2 sisyphus+296007.100.1.1 1646053433 installed <86>Nov 11 07:24:38 groupadd[3948160]: group added to /etc/group: name=colord, GID=990 <86>Nov 11 07:24:38 groupadd[3948160]: group added to /etc/gshadow: name=colord <86>Nov 11 07:24:38 groupadd[3948160]: new group: name=colord, GID=990 <86>Nov 11 07:24:38 useradd[3948179]: new user: name=colord, UID=998, GID=990, home=/var/colord, shell=/dev/null, from=none <13>Nov 11 07:24:38 rpmi: colord-1.4.6-alt1 sisyphus+296000.100.1.1 1646050423 installed <13>Nov 11 07:24:38 rpmi: libpixman-3:0.42.2-alt1 sisyphus+309549.100.1.1 1667649379 installed <13>Nov 11 07:24:38 rpmi: libbrotlicommon-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Nov 11 07:24:38 rpmi: libbrotlidec-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Nov 11 07:24:38 rpmi: libharfbuzz-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 11 07:24:38 rpmi: libfreetype-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Nov 11 07:24:38 rpmi: libfontconfig1-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Nov 11 07:24:38 rpmi: libharfbuzz-gobject-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 11 07:24:38 rpmi: libharfbuzz-gir-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 11 07:24:40 rpmi: libgs-10.01.1-alt1 sisyphus+318450.100.1.1 1681389085 installed <13>Nov 11 07:24:40 rpmi: fontconfig-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed Updating fonts cache: <29>Nov 11 07:24:41 fontconfig: Updating fonts cache: succeeded [ DONE ] <13>Nov 11 07:24:41 rpmi: libraqm-0.7.1-alt1 sisyphus+279320.100.1.2 1626503405 installed <13>Nov 11 07:24:41 rpmi: libharfbuzz-icu-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 11 07:24:41 rpmi: libX11-locales-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400315 installed <13>Nov 11 07:24:41 rpmi: libXdmcp-1.1.4-alt1 sisyphus+311188.1000.1.1 1670233860 installed <13>Nov 11 07:24:41 rpmi: libxcb-1.16-alt1 sisyphus+327325.200.1.1 1692276267 installed <13>Nov 11 07:24:41 rpmi: libX11-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400319 installed <13>Nov 11 07:24:41 rpmi: libXext-1.3.5-alt1 sisyphus+309285.100.1.1 1667212413 installed <13>Nov 11 07:24:41 rpmi: libXrender-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Nov 11 07:24:41 rpmi: libcairo-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 11 07:24:41 rpmi: libcairo-gobject-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 11 07:24:41 rpmi: libXt-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Nov 11 07:24:41 rpmi: libXfixes-6.0.1-alt1 sisyphus+331490.300.1.1 1697023235 installed <13>Nov 11 07:24:41 rpmi: libXft-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Nov 11 07:24:41 rpmi: libpango-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Nov 11 07:24:41 rpmi: libXi-1.8-alt1 sisyphus+285490.200.1.1 1632124180 installed <13>Nov 11 07:24:41 rpmi: libXinerama-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Nov 11 07:24:41 rpmi: librsvg-1:2.57.0-alt1 sisyphus+329802.400.1.1 1694991606 installed <13>Nov 11 07:24:41 rpmi: libpango-gir-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Nov 11 07:24:41 rpmi: libtk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Nov 11 07:24:41 rpmi: tk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Nov 11 07:24:41 rpmi: libXcursor-1.2.1-alt1 sisyphus+297765.200.1.1 1649053934 installed <13>Nov 11 07:24:41 rpmi: libXpm-3.5.17-alt1 sisyphus+330921.100.1.1 1696400258 installed <13>Nov 11 07:24:41 rpmi: libXmu-1.1.4-alt1 sisyphus+308663.1000.1.1 1666168416 installed <13>Nov 11 07:24:41 rpmi: libXrandr-1.5.4-alt1 sisyphus+330992.100.1.1 1696485401 installed <13>Nov 11 07:24:41 rpmi: libXcomposite-0.4.6-alt1 sisyphus+311188.200.1.1 1670233684 installed <13>Nov 11 07:24:41 rpmi: libXdamage-1.1.6-alt1 sisyphus+311188.300.1.1 1670233713 installed <13>Nov 11 07:24:41 rpmi: libgtk+2-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Nov 11 07:24:43 rpmi: libxcb-devel-1.16-alt1 sisyphus+327325.200.1.1 1692276267 installed <13>Nov 11 07:24:43 rpmi: libX11-devel-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400319 installed <13>Nov 11 07:24:43 rpmi: libXrender-devel-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Nov 11 07:24:43 rpmi: libXt-devel-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Nov 11 07:24:43 rpmi: libXmu-devel-1.1.4-alt1 sisyphus+308663.1000.1.1 1666168416 installed <13>Nov 11 07:24:43 rpmi: libXext-devel-1.3.5-alt1 sisyphus+309285.100.1.1 1667212413 installed <13>Nov 11 07:24:43 rpmi: libXaw-1.0.15-alt1 sisyphus+331490.200.1.1 1697023203 installed <13>Nov 11 07:24:43 rpmi: libgd3-2.3.3-alt1 sisyphus+286379.100.1.1 1633353310 installed <13>Nov 11 07:24:43 rpmi: tcl-tix-8.4.3-alt4 sisyphus+277292.300.2.1 1625442551 installed <13>Nov 11 07:24:43 rpmi: libat-spi2-core-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 11 07:24:43 rpmi: at-spi2-atk-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 11 07:24:44 rpmi: libgtk+3-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Nov 11 07:24:44 rpmi: libgtk+3-gir-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Nov 11 07:24:44 rpmi: liblasi-1.1.3-alt3 sisyphus+286812.100.2.1 1633968134 installed <13>Nov 11 07:24:44 rpmi: libgraphviz-9.0.0-alt2 sisyphus+333677.100.1.1 1699218365 installed <13>Nov 11 07:24:44 rpmi: libharfbuzz-cairo-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 11 07:24:44 rpmi: fontconfig-devel-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Nov 11 07:24:44 rpmi: libfreetype-devel-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Nov 11 07:24:44 rpmi: libcairo-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 11 07:24:44 rpmi: libharfbuzz-devel-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 11 07:24:44 rpmi: libharfbuzz-gir-devel-8.2.2-alt1 sisyphus+332039.100.1.1 1697618703 installed <13>Nov 11 07:24:44 rpmi: libpango-gir-devel-1.51.1-alt1 sisyphus+329828.40.3.1 1695333192 installed <13>Nov 11 07:24:44 rpmi: libcairo-gobject-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 11 07:24:44 rpmi: libXft-devel-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Nov 11 07:24:44 rpmi: libpango-devel-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Nov 11 07:24:44 rpmi: libgtk+3-devel-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Nov 11 07:24:44 rpmi: libXxf86vm-1.1.5-alt1 sisyphus+308663.1400.1.1 1666168534 installed <13>Nov 11 07:24:44 rpmi: libGLX-mesa-4:23.2.1-alt1 sisyphus+333899.400.5.2 1699481833 installed <13>Nov 11 07:24:44 rpmi: libGLX-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 11 07:24:44 rpmi: libGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 11 07:24:44 rpmi: libGLU-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Nov 11 07:24:44 rpmi: libgbm-4:23.2.1-alt1 sisyphus+333899.400.5.2 1699481833 installed <13>Nov 11 07:24:44 rpmi: libEGL-mesa-4:23.2.1-alt1 sisyphus+333899.400.5.2 1699481833 installed <13>Nov 11 07:24:44 rpmi: libEGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 11 07:24:44 rpmi: libglvnd-devel-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 11 07:24:44 rpmi: libiex30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Nov 11 07:24:44 rpmi: libilmthread30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Nov 11 07:24:44 rpmi: libimath29-3.1.6-alt4 sisyphus+327372.100.1.1 1692353383 installed <13>Nov 11 07:24:45 rpmi: libopenexr30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Nov 11 07:24:45 rpmi: libImageMagick7.10-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Nov 11 07:24:45 rpmi: ImageMagick-tools-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Nov 11 07:24:45 rpmi: libGL-devel-4:23.2.1-alt1 sisyphus+333899.400.5.2 1699481833 installed <13>Nov 11 07:24:45 rpmi: libGLU-devel-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Nov 11 07:24:45 rpmi: libepoxy-devel-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Nov 11 07:24:45 rpmi: libgtk+3-gir-devel-3.24.38-alt1 sisyphus+321614.100.1.1 1684749819 installed <13>Nov 11 07:24:45 rpmi: libgtk+2-devel-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Nov 11 07:24:45 rpmi: python3-module-pygobject3-3.46.0-alt1 sisyphus+329802.700.1.1 1694992004 installed <13>Nov 11 07:24:45 rpmi: python3-modules-tkinter-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 11 07:24:45 rpmi: libXaw-devel-1.0.15-alt1 sisyphus+331490.200.1.1 1697023203 installed <13>Nov 11 07:24:45 rpmi: libXinerama-devel-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Nov 11 07:24:45 rpmi: tk-devel-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Nov 11 07:24:45 rpmi: bwidget-1.9.1-alt1 1314273552 installed <13>Nov 11 07:24:45 rpmi: tcl-img-1.4.14-alt1 sisyphus+316986.300.2.1 1679243176 installed <13>Nov 11 07:24:45 rpmi: libtirpc-devel-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Nov 11 07:24:45 rpmi: asciidoc-a2x-9.1.0-alt2 sisyphus+282906.100.1.1 1629104440 installed <13>Nov 11 07:24:45 rpmi: boost-lockfree-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696508918 installed <13>Nov 11 07:24:45 rpmi: boost-python3-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 11 07:24:45 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Nov 11 07:24:45 rpmi: intltool-0.51.0-alt2 1513698802 installed <13>Nov 11 07:24:45 rpmi: man-db-2.11.2-alt1 sisyphus+324180.200.2.1 1688471224 installed <13>Nov 11 07:24:45 rpmi: libmodbus-devel-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Nov 11 07:24:45 rpmi: libusb-devel-1.0.26-alt2 sisyphus+305525.100.1.1 1660924428 installed <13>Nov 11 07:24:45 rpmi: tclx-1:8.4.4-alt1 sisyphus+251935.100.1.1 1589842635 installed <13>Nov 11 07:24:45 rpmi: xorg-cf-files-1.0.7-alt3 sisyphus+299066.100.1.1 1650986802 installed <13>Nov 11 07:24:45 rpmi: python3-module-yapps2-2.2.0-alt2 sisyphus+281199.100.1.1 1627462968 installed <13>Nov 11 07:24:45 rpmi: libudev-devel-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Nov 11 07:24:45 rpmi: libreadline-devel-8.2.1-alt1 sisyphus+328858.100.1.1 1694010631 installed <13>Nov 11 07:24:45 rpmi: dos2unix-7.5.1-alt1 sisyphus+328819.100.1.1 1693973916 installed Building target platforms: i586 Building for target i586 Wrote: /usr/src/in/nosrpm/linuxcnc-2.9.1-alt2.20231009.nosrc.rpm (w1.gzdio) Installing linuxcnc-2.9.1-alt2.20231009.src.rpm Building target platforms: i586 Building for target i586 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.4807 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf linuxcnc-2.9.1 + echo 'Source #0 (linuxcnc-2.9.1.tar):' Source #0 (linuxcnc-2.9.1.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/linuxcnc-2.9.1.tar + cd linuxcnc-2.9.1 + /bin/chmod -c -Rf u+rwX,go-w . + echo 'Patch #0 (linuxcnc-2.9.1-alt2.20231009.patch):' Patch #0 (linuxcnc-2.9.1-alt2.20231009.patch): + /usr/bin/patch -p1 patching file .gear/rules patching file .gear/tags/list patching file .gear/upstream/remotes patching file lib/python/qtvcp/lib/virtual_keyboard.py patching file linuxcnc-documentation.desktop patching file linuxcnc.spec patching file scripts/linuxcnc_info.in patching file share/qtvcp/panels/test_panel/test_panel_handler.py patching file src/Makefile patching file src/Makefile.inc.in patching file src/configure.ac + sed -i 's|lib/tcltk/linuxcnc|lib/tcl/linuxcnc|' lib/python/rs274/options.py + sed -i 's|INCLUDES := .|INCLUDES := . /usr/include/tirpc|' src/Makefile + sed -i 's|LDFLAGS := |LDFLAGS := -ltirpc |' src/Makefile + sed 's/ -o root//g' -i src/Makefile + find . -name '*.py' -exec dos2unix '{}' ';' dos2unix: converting file ./tests/trajectory-planner/circular-arcs/test-reverse.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/run_all_tests.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/machine_setup.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/linuxcnc_control.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/m61/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-with-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-no-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/tlo/test-ui.py to Unix format... dos2unix: converting file ./tests/statbuffer-g5x-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/startup-state/test-ui.py to Unix format... dos2unix: converting file ./tests/single-step/test-ui.py to Unix format... dos2unix: converting file ./tests/rs274ngc-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/subs.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/remap.py to Unix format... dos2unix: converting file ./tests/remap/spindle/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/spindle/remap.py to Unix format... dos2unix: converting file ./tests/remap/sequencing/permute.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/remap.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/remap.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/subs.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/namedparams.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/subs.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/oword.py to Unix format... dos2unix: converting file ./tests/remap/introspect/subs.py to Unix format... dos2unix: converting file ./tests/remap/introspect/oword.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/remap.py to Unix format... dos2unix: converting file ./tests/mqtt/display.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-joint/test-ui.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-axis/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/startup-gcode-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/mountaindew/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/basic/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/toplevel.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/remap.py to Unix format... dos2unix: converting file ./tests/mdi-queue-length/test-ui.py to Unix format... dos2unix: converting file ./tests/lathe/test-ui.py to Unix format... dos2unix: converting file ./tests/io-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/subs.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/oword.py to Unix format... dos2unix: converting file ./tests/interp/subroutine-return/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/python/error/canon.py to Unix format... dos2unix: converting file ./tests/interp/python-self/subs.py to Unix format... dos2unix: converting file ./tests/interp/python-self/oword.py to Unix format... dos2unix: converting file ./tests/interp/pymove/subs.py to Unix format... dos2unix: converting file ./tests/interp/pymove/oword.py to Unix format... dos2unix: converting file ./tests/interp/oword-mdi-sub-update/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/mdi-oword-m66/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/m98m99/12-M99-endless-main-program/test-ui.py to Unix format... dos2unix: converting file ./tests/hm2-idrom/check-dmesg.py to Unix format... dos2unix: converting file ./tests/hard-limits/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/mdi/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/jogging/test-ui.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_writer.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_test.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_reader.py to Unix format... dos2unix: converting file ./tests/halmodule.0/test.py to Unix format... dos2unix: converting file ./tests/hal-link-unlink/hallink.py to Unix format... dos2unix: converting file ./tests/ccomp/early-exit/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/stop-button-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/on_abort_command-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/g64/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/feed-rate/test-ui.py to Unix format... dos2unix: converting file ./src/po/fixpaths.py to Unix format... dos2unix: converting file ./src/modsilent.py to Unix format... dos2unix: converting file ./src/hal/utils/elbpcom.py to Unix format... dos2unix: converting file ./src/hal/user_comps/z_level_compensation.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzbc-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzac-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzab-tdr-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/scaragui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/rotarydelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/pumagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/puma560gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/millturngui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/melfagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/max5gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/maho600gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/lineardelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hexagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hbmgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/5axisgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/sim-torch.py to Unix format... dos2unix: converting file ./src/hal/user_comps/scorbot-er-3.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pyvcp.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pmx485.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mqtt-publisher.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mitsub_vfd.py to Unix format... dos2unix: converting file ./src/hal/user_comps/hal_input.py to Unix format... dos2unix: converting file ./src/hal/user_comps/gladevcp.py to Unix format... dos2unix: converting file ./src/hal/drivers/rbf2h.py to Unix format... dos2unix: converting file ./src/hal/drivers/mesa-hostmot2/modbus/modcompile.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/touchy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/listing.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/hal_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/filechooser.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/stepconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/import_mach.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtvcp/qtvcp.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac_gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-plasmac2qt.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-materials.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-cfg2prefs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/pmx485-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/pyui.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_validate.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_handler.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/master.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/commands.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/tests.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/private_data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pncconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/mdro/mdro.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/keybindings.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/gscreen.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/qt5_graphics.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/gremlin.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/player.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/notification.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/icon_theme_helper.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/gmoccapy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/getiniinfo.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/dialogs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/tracking-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/teach-in.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/linuxcnctop.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/lintini.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/image-to-gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/haltest.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/debuglevel.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis-remote.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/makeicon.py to Unix format... dos2unix: converting file ./src/emc/ini/update_ini.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/x1mill/x1mill_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/woodpecker/woodpecker_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qttouchy/qttouchy_handler.py to Unix format... dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py. dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py. dos2unix: converting file ./share/qtvcp/screens/qtplasmac/qtplasmac_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtplasmac/languages/qtplasmac.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtlathe/qtlathe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon/qtdragon_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtaxis/qtaxis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc/qt_cnc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/blender/blender_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_scara/vismach_scara_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/versaprobe/versaprobe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/tool_dialog/tool_dialog_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_probe/test_probe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_panel/test_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_led/test_led_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_dial/test_dial_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_button/test_button_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/spindle_belts/spindle_belts_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/sim_panel/sim_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/copy/copy_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/cam_align/cam_align_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/spartan/spartan_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/silverdragon/silverdragon_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/industrial/industrial_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis/gaxis_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/9_axis/9_axis_handler.py to Unix format... dos2unix: converting file ./scripts/torture.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/stdglue.py to Unix format... dos2unix: Skipping symbolic link ./nc_files/remap_lib/python-stdglue/python/stdglue.py. dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/toplevel.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/remap.py to Unix format... dos2unix: converting file ./nc_files/involute.py to Unix format... dos2unix: converting file ./nc_files/holecircle.py to Unix format... dos2unix: converting file ./nc_files/flowsnake.py to Unix format... dos2unix: converting file ./nc_files/filtertest.py to Unix format... dos2unix: converting file ./nc_files/filtertest-gui.py to Unix format... dos2unix: converting file ./lib/python/vismach.py to Unix format... dos2unix: converting file ./lib/python/vcpparse.py to Unix format... dos2unix: converting file ./lib/python/tooldb.py to Unix format... dos2unix: converting file ./lib/python/rs274/options.py to Unix format... dos2unix: converting file ./lib/python/rs274/interpret.py to Unix format... dos2unix: converting file ./lib/python/rs274/glcanon.py to Unix format... dos2unix: converting file ./lib/python/rs274/author.py to Unix format... dos2unix: converting file ./lib/python/rs274/__init__.py to Unix format... dos2unix: converting file ./lib/python/rs274/OpenGLTk.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_baseclass.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/web_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/virtualkeyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/versa_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/touchEntry.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tool_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tab_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/system_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/stylesheeteditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_stacked.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_slider.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_led.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/simple_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/screen_options.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/runFromLine_dialog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_progress.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_gauge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/richtext_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/radio_axis_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/qtvcp_icons.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_subprog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_routines.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/overlay_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/origin_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/offset_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/nurbs_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_touchy.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_history.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/led_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/joypad.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/jog_increments.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/image_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_selectionbox.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_output.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_input.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/geditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_graphics.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/file_manager.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/fake_status.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/entry_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialog_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialogMixin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/detach_tabs.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/container_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/camview_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/calculator.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/basic_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/axis_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/adjustment_bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button_round.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qtvcp_handler.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_tstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_pstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makepins.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makegui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_istat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_action.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/widgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/web_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/virtualkeyboard_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/versa_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/toolbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/tab_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_slider_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/simplewidgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/screenoptions_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_progress_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_gauge_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/qtvcp_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/overlay_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/nurbs_editor_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/joypad_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/jogincrements_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/hal_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/graphics_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/dialog_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/detach_tabs_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/container_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/camview_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/basic_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/actionbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/logger.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/virtual_keyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/writer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/wordcount.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/table.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/find.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/datetime.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/touchoff_subprogram.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/toolbar_actions.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/sys_notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/ripper/gcode_ripper.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/updater.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/tooltips.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/set_offsets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conversational.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_triangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_star.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_slot.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_settings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_sector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_polygon.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_gusset.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_bolt.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_block.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/scara.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/qt_vismach.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/primitives.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/millturn.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/mill_xyz.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_pdf/PDFViewer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/preferences.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/message.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/mdi_text.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/keybindings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcodes.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/facing.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/colored_formatter.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/aux_program_loader.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/auto_height/auto_height.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/audio_player.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/core.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/pyvcp_widgets.py to Unix format... dos2unix: converting file ./lib/python/pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/pyhal.py to Unix format... dos2unix: converting file ./lib/python/propertywindow.py to Unix format... dos2unix: converting file ./lib/python/popupkeyboard.py to Unix format... dos2unix: converting file ./lib/python/plasmac/triangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/star.py to Unix format... dos2unix: converting file ./lib/python/plasmac/slot.py to Unix format... dos2unix: converting file ./lib/python/plasmac/sector.py to Unix format... dos2unix: converting file ./lib/python/plasmac/run_from_line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/rectangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/polygon.py to Unix format... dos2unix: converting file ./lib/python/plasmac/line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/gusset.py to Unix format... dos2unix: converting file ./lib/python/plasmac/ellipse.py to Unix format... dos2unix: converting file ./lib/python/plasmac/circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/bolt_circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/block.py to Unix format... dos2unix: converting file ./lib/python/multifilebuilder.py to Unix format... dos2unix: converting file ./lib/python/linuxcnc_util.py to Unix format... dos2unix: converting file ./lib/python/linux_event.py to Unix format... dos2unix: converting file ./lib/python/hershey.py to Unix format... dos2unix: converting file ./lib/python/hal_glib.py to Unix format... dos2unix: converting file ./lib/python/hal.py to Unix format... dos2unix: converting file ./lib/python/gremlin_view.py to Unix format... dos2unix: converting file ./lib/python/glnav.py to Unix format... dos2unix: converting file ./lib/python/gladevcp_makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/xembed.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/tooledit_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/status_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/state_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/speedcontrol.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/persistence.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/overridewidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetpage_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/led.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/jogwheel.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/iconview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_widgets.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_sourceview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pythonplugin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_meter.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_mdihistory.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_lightbutton.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin_plus.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_graph.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_filechooser.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_dial.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_bar.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_actions.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gtk_action.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gladebuilder.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/drowidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/core.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/combi_dro.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/calculatorwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/bwidget.py to Unix format... dos2unix: converting file ./lib/python/bitfile.py to Unix format... dos2unix: converting file ./docs/src/mkpre.py to Unix format... dos2unix: converting file ./docs/src/links_db_gen.py to Unix format... dos2unix: converting file ./docs/src/links.py to Unix format... dos2unix: converting file ./docs/src/gui/panelui_handler.py to Unix format... dos2unix: converting file ./docs/src/gen_complist.py to Unix format... dos2unix: converting file ./docs/src/checklinks.py to Unix format... dos2unix: converting file ./debian/tests/linuxcnc-test-ui.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/zlevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/woodpecker_/woodpecker_handler.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/numstr.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/compensate.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/touchy/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/qtplasmac/custom_filter.py to Unix format... dos2unix: converting file ./configs/sim/hitcounter.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/signals.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/plasma.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/lathe_configs/lathehandler.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/blockdelete.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/util.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/panelui-demo/panelui_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/plugins.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/embedding.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/fullscreen.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/axis_resize.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/remap.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/axis/gladevcp/test_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/probe.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/meter_scale.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_ran.py. dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_nonran.py. dos2unix: converting file ./configs/sim/axis/db_demo/db.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/functionhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler_persistent.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/simple-callback/simplecallback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/complex/complex.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/colored-label/coloredlabel.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/class-callback/class_callback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/spinbutton.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/sourceview.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/radio.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox_manual_list.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/animated-backdrop/cairodraw.py to Unix format... + sed -i 's/GROUP="plugdev"/GROUP="uucp"/g' debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.47111 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd linuxcnc-2.9.1 + pushd src ~/RPM/BUILD/linuxcnc-2.9.1/src ~/RPM/BUILD/linuxcnc-2.9.1 + ./autogen.sh + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CFLAGS + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CXXFLAGS + FFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FFLAGS + FCFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FCFLAGS + '[' -n '' ']' ++ sed -r 's/(^|[[:space:]]+)-[^m][^[:space:]]*//g' ++ printf %s '-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + ASFLAGS=' -march=i586 -mtune=generic' + export ASFLAGS + export lt_cv_deplibs_check_method=pass_all + lt_cv_deplibs_check_method=pass_all + sort -u + readlink -e -- ./configure + xargs -rn1 install -pm755 -- /usr/share/gnu-config/config.sub /usr/share/gnu-config/config.guess + xargs -ri find '{}' -type f '(' -name config.sub -or -name config.guess ')' -printf '%h/\n' + xargs -ri dirname -- '{}' + configure_runstatedir_flags= + grep -qF runstatedir=DIR ./configure + configure_runstatedir_flags=--runstatedir=/var/run + ./configure --build=i586-alt-linux --host=i586-alt-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var/lib --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --disable-silent-rules --runstatedir=/var/run --without-included-gettext --enable-non-distributable=yes --with-realtime=uspace configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext checking for i586-alt-linux-c++... no checking for i586-alt-linux-clang++... no checking for c++... c++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking for a BSD-compatible install... /bin/install -c checking whether c++ supports C++17 features with -std=gnu++17... yes checking build toplevel... /usr/src/RPM/BUILD/linuxcnc-2.9.1 checking installation prefix... /usr checking for grep... /bin/grep checking for egrep... /usr/bin/egrep checking for pkg-config... /usr/bin/pkg-config checking for i586-alt-linux-gcc... i586-alt-linux-gcc checking whether the compiler supports GNU C... yes checking whether i586-alt-linux-gcc accepts -g... yes checking for i586-alt-linux-gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for rpc/rpc.h... no checking for get_myaddress in -ltirpc... yes checking for rpc/rpc.h... yes checking for rtai-config... none checking for xeno-config... none checking for realtime API(s) to use... uspace checking whether to enable userspace PCI access... yes checking for libudev... yes - version 254 checking for cc version... not specified checking for i586-alt-linux-gcc... (cached) i586-alt-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i586-alt-linux-gcc accepts -g... (cached) yes checking for i586-alt-linux-gcc option to enable C11 features... (cached) none needed checking how to run the C preprocessor... i586-alt-linux-gcc -E checking for usability of linux/hidraw.h... yes checking for usability of rpc/rpc.h... yes checking for libmodbus3... yes - version 3.1.10 checking for libusb-1.0... yes checking for libgpiod... checking for main in -lgpiod... no configure: WARNING: Could not find libgpiod, not building hal_gpio checking for module installation directory... /usr/lib/linuxcnc/modules checking for glib... yes - 2.78.1 checking for GTK 3.22.4 or above... yes - 3.24.38 checking for GTK 2.4.0 or above... yes - 2.24.33 checking for libgnomeprintui-2.2... no -- printing from classicladder will not be possible checking whether make sets $(MAKE)... yes checking for i586-alt-linux-ranlib... no checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for install... /bin/install -c checking for sed... /bin/sed checking for ps... /bin/ps checking for kill... /bin/kill checking for whoami... /usr/bin/whoami checking for awk... /bin/awk checking for pidof... /bin/pidof checking for ipcs... /usr/bin/ipcs checking for fuser... /usr/bin/fuser checking for yapps... no checking for yapps2... /usr/bin/yapps2 checking for mandb... /usr/bin/mandb checking for intltool-extract... /usr/bin/intltool-extract checking for yapps... (cached) /usr/bin/yapps2 checking build system type... i586-alt-linux-gnu checking host system type... i586-alt-linux-gnu checking for boostlib >= (102000)... yes checking for python build information... checking for python3.11... python3.11 checking for main in -lpython3.11... yes results of the Python check: Binary: python3.11 Library: python3.11 Include Dir: /usr/include/python3.11 checking for python3.11... /usr/bin/python3.11 checking for python... (cached) /usr/bin/python3.11 checking for a version of Python >= '2.1.0'... yes checking for the sysconfig Python package... yes checking for Python include path... -I/usr/include/python3.11 checking for Python library path... -L/usr/lib -lpython3.11 checking for Python site-packages path... /usr/lib/python3/site-packages checking for Python platform specific site-packages path... checking python extra libraries... -ldl -lm checking python extra linking flags... -Xlinker -export-dynamic checking consistency of all components of python development environment... yes checking whether the Boost::Python library is available... yes checking whether boost_python is the correct library... no checking whether boost_python311-mt is the correct library... yes checking whether to build documentation... no checking for sys/io.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for semtimedop... yes checking for optreset... no checking for library containing dlopen... none required checking for library containing clock_nanosleep... none required checking for tcl... find: '/usr/lib/chkpwd': Permission denied /usr/lib/tclConfig.sh found checking for tk... /usr/lib/tkConfig.sh found checking whether to check for runtime dependencies... yes checking for BWidget using /usr/bin/tclsh8.6... found checking for BLT using /usr/bin/tclsh8.6... not found checking for tclX using /usr/bin/tclsh8.6... found checking for python pango module... found checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X11/extensions/Xinerama.h... yes checking for XineramaQueryExtension in -lXinerama... yes checking for readline/readline.h... yes checking for readline/history.h... yes Trying readline without -ltermcap checking for readline in -lreadline... yes Trying readline with -ltermcap checking for readline in -lreadline... no Readline does not require -ltermcap checking whether readline license is compatible with GPL-2... no configure: WARNING: The LinuxCNC binary you are building may not be distributable due to a license incompatibility with LinuxCNC (some portions GPL-2 only) and Readline version 6 and greater (GPL-3 or later). configure: WARNING: User requested to enable non-distributable builds. Continuing. checking for locale.h... yes checking for setlocale... yes checking for libintl.h... yes checking for gettext in -lintl... no checking for xgettext... /usr/bin/xgettext checking for msgfmt... /usr/bin/msgfmt checking python version... OK checking match between tk and Tkinter versions... 8.6 checking for site-package location... /usr/lib/python3/site-packages checking for working GLU quadrics... yes checking for Xmu headers... checking for X11/Xmu/Xmu.h... yes configure: creating ./config.status config.status: creating ../scripts/rtapi.conf config.status: creating ../scripts/linuxcnc config.status: creating ../scripts/linuxcnc_info config.status: creating ../scripts/halrun config.status: creating ../scripts/rip-environment config.status: creating ../scripts/haltcl config.status: creating ../scripts/halcmd_twopass config.status: creating ../scripts/realtime config.status: creating ../scripts/runtests config.status: creating ../scripts/linuxcnc_var config.status: creating ../scripts/linuxcnc-checklink config.status: creating Makefile.inc config.status: creating Makefile.modinc config.status: creating ../tcl/linuxcnc.tcl config.status: creating ../lib/python/nf.py config.status: creating ../scripts/linuxcncmkdesktop config.status: creating ../share/applications/linuxcnc-latency.desktop config.status: creating ../share/applications/linuxcnc-latency-histogram.desktop config.status: creating ../share/applications/linuxcnc-pncconf.desktop config.status: creating ../share/applications/linuxcnc-stepconf.desktop config.status: creating ../share/applications/linuxcnc.desktop config.status: creating ../share/desktop-directories/linuxcnc-cnc.directory config.status: creating ../share/desktop-directories/linuxcnc-ref.directory config.status: creating ../share/desktop-directories/linuxcnc-doc.directory config.status: creating ../share/menus/CNC.menu config.status: creating config.h configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext ###################################################################### # LinuxCNC - Enhanced Machine Controller # ###################################################################### # # # LinuxCNC is a software system for computer control of machine # # tools such as milling machines. LinuxCNC is released under the # # GPL. Check out http://www.linuxcnc.org/ for more details. # # # # # # It seems that ./configure completed successfully. # # This means that RT is properly installed # # If things don't work check config.log for errors & warnings # # # # warning: If you already have an installed linuxcnc, this will # # replace an existing installation. If you have installed # # a linuxcnc package, this will damage the package. # # hint: To test a self-built version of linuxcnc without damaging # # the package version, don't specify a --prefix # # # # Next compile by typing # # make # # then install it by typing # # sudo make install # # # # To run the software type # # linuxcnc # # # ###################################################################### + make -j8 make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/115 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating abs.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating abs_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating and2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating anglejog.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating axistest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bin2gray.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating biquad.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bitslice.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bitwise.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bldc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating blend.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating carousel.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating charge_pump.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarke2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarke3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarkeinv.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating comp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating constant.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating corexy_by_hal.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating dbounce.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ddt.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating deadzone.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating demux.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating differential.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating div2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating edge.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating eoffset_per_angle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating estop_latch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating feedcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating filter_kalman.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating flipflop.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gantry.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gearchange.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gray2bin.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating histobins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating homecomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating hypot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ilowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating integ.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating invert.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating joyhandle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating knob2float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating latencybins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit1.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit_axis.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lincurve.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating logic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lut5.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating maj3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating match8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating max31855.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_pktgyro_test.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating message.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating millturn.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating minmax.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating moveoff.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mult2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating multiclick.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating multiswitch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux16.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux4.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating near.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating not.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating offset.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ohmic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating oneshot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating or2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating orient.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating plasmac.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sample_hold.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating scale.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating scaled_s32_sums.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating select8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_axis_hardware.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_home_switch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_matrix_kb.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_parport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating simple_tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sphereprobe.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating spindle_monitor.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating steptest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sum2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating thc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating thcud.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating threadtest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating time.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating timedelay.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating timedelta.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tof.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating toggle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating toggle2nist.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ton.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tristate_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tristate_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating updown.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating userkins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating wcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xhc_hb04_util.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xor2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xyzab_tdr_kins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating serport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_7i65.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_uart.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_float_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_float_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/237 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp ../scripts/rtapi.conf ../tests/uspace/spawnv-root/rtapi.conf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' sed hal/drivers/mesa_uart.comp -e "1 s/mesa_uart/mesa_uart_test/" > ../tests/halcompile/serial-out-of-tree/mesa_uart_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' sed ../docs/src/hal/rand.comp -e "1 s/rand/rand_test/" > ../tests/halcompile/userspace/rand_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/rcs/rcs_exit.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/rcs/rcs_print.cc libnml/rcs/rcs_print.cc: In function 'int rcs_fputs(const char*)': libnml/rcs/rcs_print.cc:372:26: warning: the address of 'rcs_print_file_name' will never be NULL [-Waddress] 372 | if (NULL == rcs_print_file_name) { | ^ libnml/rcs/rcs_print.cc:48:6: note: 'rcs_print_file_name' declared here 48 | char rcs_print_file_name[80] = "rcs_out.txt"; | ^~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/posemath.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_sem.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_shm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_timer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/sem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/shm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/phantom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/memsem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/timer.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/locmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/physmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/recvn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/sendn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/shmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_aup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_in.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_pm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_cfg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_dup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_up.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/tcp_opts.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_xup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/cmd_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_oi.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cmsdiag.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/tcpmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/tcp_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nmldiag.cc libnml/nml/nmldiag.cc: In function 'int nml_print_diag_list()': libnml/nml/nmldiag.cc:134:26: warning: the address of 'CMS::BufferName' will never be NULL [-Waddress] 134 | if (NULL != nml->cms->BufferName) { | ^ In file included from libnml/cms/cmsdiag.hh:18, from libnml/nml/nmldiag.hh:18, from libnml/nml/nmldiag.cc:16: libnml/cms/cms.hh:354:10: note: 'CMS::BufferName' declared here 354 | char BufferName[LINELEN]; | ^~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nmlmsg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/stat_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/linklist/linklist.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_ulapi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_string.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in config.status: creating ../docs/man/man1/linuxcnc.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_parport.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/inifile/inivar.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/rtapi_pci.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/inifile/inifile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/emccalib.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/emccalib.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/emccalib.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/emccalib.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" Note: Writing emccalib.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/halstreamer.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/halstreamer.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/halstreamer.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/halstreamer.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" Note: Writing halstreamer.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/mqtt-publisher.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/mqtt-publisher.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/mqtt-publisher.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/mqtt-publisher.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" Note: Writing mqtt-publisher.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/hy_gt_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/hy_gt_vfd.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/hy_gt_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/hy_gt_vfd.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" Note: Writing hy_gt_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/sendkeys.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/sendkeys.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/sendkeys.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/sendkeys.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" Note: Writing sendkeys.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_mod.cc libnml/nml/nml_mod.cc: In member function 'void NML_MODULE::setCmdChannel(RCS_CMD_CHANNEL*)': libnml/nml/nml_mod.cc:274:16: warning: the address of 'CMS::ProcessName' will never be NULL [-Waddress] 274 | if (NULL != commandIn->cms->ProcessName) | ^ In file included from libnml/nml/nml_oi.hh:20, from libnml/nml/nml_mod.cc:66: libnml/cms/cms.hh:356:10: note: 'CMS::ProcessName' declared here 356 | char ProcessName[LINELEN]; | ^~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/streamer_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/svd-ps_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/svd-ps_vfd.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/svd-ps_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/svd-ps_vfd.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" Note: Writing svd-ps_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/sampler_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/panelui.c hal/components/panelui.c: In function 'main': hal/components/panelui.c:211:5: warning: 'Py_SetProgramName' is deprecated [-Wdeprecated-declarations] 211 | Py_SetProgramName(wname); | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.11/Python.h:94, from hal/components/panelui.c:73: /usr/include/python3.11/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_init.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_modbus.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/gs2_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/hy_gt_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man3/hm2_pktuart.3` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man3/hm2_pktuart.3.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man3', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man3/hm2_pktuart.3.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man3/hm2_pktuart.3.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" Note: Writing hm2_pktuart.3 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/shuttle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/svd-ps_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/enum.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/enum.9.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/enum.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/enum.9.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/enum.9.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" Note: Writing enum.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/sendkeys.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_app.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/xhc-whb04b-6.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/xhc-whb04b-6.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/xhc-whb04b-6.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/xhc-whb04b-6.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" Note: Writing xhc-whb04b-6.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/streamer.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/streamer.9.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/streamer.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/streamer.9.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/streamer.9.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" Note: Writing streamer.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/vfs11_vfd/vfs11_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/config.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/classicladder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/drawing_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/classicladder_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/drawing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/config_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/emc_mods.c hal/classicladder/emc_mods.c: In function 'ConvVarNameToHalSigName': hal/classicladder/emc_mods.c:137:20: warning: the comparison will always evaluate as 'true' for the address of 'name' will never be NULL [-Waddress] 137 | if(sig->name) { | ^~~ In file included from hal/classicladder/emc_mods.c:25: ./hal/hal_priv.h:332:10: note: 'name' declared here 332 | char name[HAL_NAME_LEN + 1]; /* signal name */ | ^~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files_project.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/protocol_modbus_slave.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/serial_linux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/protocol_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/socket_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/socket_server.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/vars_names.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/editproperties_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halsh.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/manager_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_main.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_completion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/spy_vars_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/symbols_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-hb04.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halrmt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/miscgtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/meter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_commands.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script elbpcom Copying python script elbpcom make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying Modbus template mesa_modbus.c.tmpl make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script modcompile Copying python script modcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_horiz.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_vert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/huanyang-vfd/hy_comm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/vfdb_vfd/vfdb_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_trig.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/huanyang-vfd/hy_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_disp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/pendant-types.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/usb.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/modal_state.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/xhc-whb04b6.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/hal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcargs.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/canon_position.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcops.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/main.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/pendant.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/shcom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inihal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/interpl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/emcIniFile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/iniaxis.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inijoint.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/sockets.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inispindle.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/initraj.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_mmap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_common.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/emcmotglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_db.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcrsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/schedrmt.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcsched.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emclcd.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emccanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/halui.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/backtrace.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emcsvr.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/usrmotintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emctaskmain.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_arc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_base.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_array.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emctask.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_check.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_queue.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_execute.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_find.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_cycles.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_convert.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_internal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_inverse.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_write.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/nurbs_additional_functions.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_read.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_o_word.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_g7x.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_python.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_remap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_setup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_namedparams.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/canonmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyparamclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_inspection.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyemctypes.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyblock.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/ugenserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/canterp/canterp.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyarrays.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/iotask/ioControl.cc emc/iotask/ioControl.cc: In function 'int main(int, char**)': emc/iotask/ioControl.cc:694:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 694 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:695:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 695 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:696:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 696 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interpmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion-logger/motion-logger.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/iotask/ioControl_v2.cc emc/iotask/ioControl_v2.cc: In function 'int main(int, char**)': emc/iotask/ioControl_v2.cc:791:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 791 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:792:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 792 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:793:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 793 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/pythonplugin/python_plugin.cc emc/pythonplugin/python_plugin.cc: In constructor 'PythonPlugin::PythonPlugin(_inittab*)': emc/pythonplugin/python_plugin.cc:298:22: warning: 'void Py_SetProgramName(const wchar_t*)' is deprecated [-Wdeprecated-declarations] 298 | Py_SetProgramName(program); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ In file included from /usr/include/python3.11/Python.h:94, from /usr/include/boost/python/detail/wrap_python.hpp:178, from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/ssize_t.hpp:9, from /usr/include/boost/python/object.hpp:8, from emc/pythonplugin/python_plugin.hh:25, from emc/pythonplugin/python_plugin.cc:19: /usr/include/python3.11/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/saicanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling module_helper/module_helper.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/cs/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/da/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/fi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/de/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/es/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/fr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/hu/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ja/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/nb/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/it/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/pl/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ro/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ru/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sk/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sv/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/vi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/cs/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/da/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/de/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/es/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/fr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/it/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/nb/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/hu/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/pl/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/sk/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/vi/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/linuxcnc.h ../include/linuxcnc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/sr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/emcIniFile.hh ../include/emcIniFile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/iniaxis.hh ../include/iniaxis.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inijoint.hh ../include/inijoint.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inispindle.hh ../include/inispindle.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/initraj.hh ../include/initraj.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inihal.hh ../include/inihal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/cubic.h ../include/cubic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/kinematics.h ../include/kinematics.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/switchkins.h ../include/switchkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/genhexkins.h ../include/genhexkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/genserkins.h ../include/genserkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/pentakins.h ../include/pentakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/pumakins.h ../include/pumakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tc.h ../include/tc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tc_types.h ../include/tc_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tcq.h ../include/tcq.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tp.h ../include/tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tp_types.h ../include/tp_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/spherical_arc.h ../include/spherical_arc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/blendmath.h ../include/blendmath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/emcmotcfg.h ../include/emcmotcfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/motion.h ../include/motion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/homing.h ../include/homing.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/simple_tp.h ../include/simple_tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/state_tag.h ../include/state_tag.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/usrmotintf.h ../include/usrmotintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/axis.h ../include/axis.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/canon.hh ../include/canon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/canon_position.hh ../include/canon_position.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emctool.h ../include/emctool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emc.hh ../include/emc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emc_nml.hh ../include/emc_nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emccfg.h ../include/emccfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcglb.h ../include/emcglb.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcpos.h ../include/emcpos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcpose.h ../include/emcpose.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/interp_return.hh ../include/interp_return.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/interpl.hh ../include/interpl.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/motion_types.h ../include/motion_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/debugflags.h ../include/debugflags.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_internal.hh ../include/interp_internal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_fwd.hh ../include/interp_fwd.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_base.hh ../include/interp_base.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/modal_state.hh ../include/modal_state.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/rs274ngc.hh ../include/rs274ngc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/sai/saicanon.hh ../include/saicanon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/hal.h ../include/hal.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/hal_parport.h ../include/hal_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/drivers/mesa-hostmot2/hostmot2-serial.h ../include/hostmot2-serial.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/locmem.hh ../include/locmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/memsem.hh ../include/memsem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/phantom.hh ../include/phantom.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/physmem.hh ../include/physmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/recvn.h ../include/recvn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/rem_msg.hh ../include/rem_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/sendn.h ../include/sendn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/shmem.hh ../include/shmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/tcpmem.hh ../include/tcpmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms.hh ../include/cms.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_aup.hh ../include/cms_aup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_cfg.hh ../include/cms_cfg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_dup.hh ../include/cms_dup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_srv.hh ../include/cms_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_up.hh ../include/cms_up.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_user.hh ../include/cms_user.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_xup.hh ../include/cms_xup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cmsdiag.hh ../include/cmsdiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/tcp_opts.hh ../include/tcp_opts.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/tcp_srv.hh ../include/tcp_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/inifile/inifile.h ../include/inifile.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/inifile/inifile.hh ../include/inifile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/linklist/linklist.hh ../include/linklist.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/cmd_msg.hh ../include/cmd_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml.hh ../include/nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_mod.hh ../include/nml_mod.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_oi.hh ../include/nml_oi.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_srv.hh ../include/nml_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_type.hh ../include/nml_type.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nmldiag.hh ../include/nmldiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nmlmsg.hh ../include/nmlmsg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/stat_msg.hh ../include/stat_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_sem.h ../include/_sem.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/sem.hh ../include/sem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_shm.h ../include/_shm.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/shm.hh ../include/shm.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_timer.h ../include/_timer.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/timer.hh ../include/timer.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/posemath.h ../include/posemath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/gotypes.h ../include/gotypes.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/gomath.h ../include/gomath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs.hh ../include/rcs.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/sincos.h ../include/sincos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs_exit.hh ../include/rcs_exit.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs_print.hh ../include/rcs_print.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcsversion.h ../include/rcsversion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi.h ../include/rtapi.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_app.h ../include/rtapi_app.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_atomic.h ../include/rtapi_atomic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_bitops.h ../include/rtapi_bitops.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_bool.h ../include/rtapi_bool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_byteorder.h ../include/rtapi_byteorder.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_device.h ../include/rtapi_device.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_firmware.h ../include/rtapi_firmware.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/dummyemcstat.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_gfp.h ../include/rtapi_gfp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_io.h ../include/rtapi_io.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_limits.h ../include/rtapi_limits.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_list.h ../include/rtapi_list.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math.h ../include/rtapi_math.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math_i386.h ../include/rtapi_math_i386.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math64.h ../include/rtapi_math64.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_mutex.h ../include/rtapi_mutex.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_parport.h ../include/rtapi_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_pci.h ../include/rtapi_pci.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_slab.h ../include/rtapi_slab.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_stdint.h ../include/rtapi_stdint.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_ctype.h ../include/rtapi_ctype.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_errno.h ../include/rtapi_errno.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_string.h ../include/rtapi_string.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_vsnprintf.h ../include/rtapi_vsnprintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/da.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/cs.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/fi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/es.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/de.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/rs274ngc_pre.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/hu.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/fr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ja.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/nb.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/it.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/pl.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/pt_BR.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ro.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sk.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ru.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sv.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/vi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_CN.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_HK.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_TW.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pyvcp Copying python script pyvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_input Copying python script hal_input make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gladevcp Copying python script gladevcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script scorbot-er-3 Copying python script scorbot-er-3 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mitsub_vfd Copying python script mitsub_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script sim-torch Copying python script sim-torch make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pmx485 Copying python script pmx485 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script z_level_compensation Copying python script z_level_compensation make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mqtt-publisher Copying python script mqtt-publisher make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pumagui Copying python script pumagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script puma560gui Copying python script puma560gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script lineardelta Copying python script lineardelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script scaragui Copying python script scaragui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hexagui Copying python script hexagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script 5axisgui Copying python script 5axisgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script max5gui Copying python script max5gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script maho600gui Copying python script maho600gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyinterp1.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hbmgui Copying python script hbmgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script rotarydelta Copying python script rotarydelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script melfagui Copying python script melfagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script millturngui Copying python script millturngui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzac-trt-gui Copying python script xyzac-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzbc-trt-gui Copying python script xyzbc-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzab-tdr-gui Copying python script xyzab-tdr-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script axis-remote Copying python script axis-remote make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script linuxcnctop Copying python script linuxcnctop make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_manualtoolchange Copying python script hal_manualtoolchange make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script axis Copying python script axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi Copying python script mdi make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script lintini Copying python script lintini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script image-to-gcode Copying python script image-to-gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script debuglevel Copying python script debuglevel make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script teach-in Copying python script teach-in make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script tracking-test Copying python script tracking-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script touchy Copying python script touchy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_interface.py Copying python script hal_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file touchy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script filechooser.py Copying python script filechooser.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying linuxcnc-wizard.gif make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script listing.py Copying python script listing.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/driver.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script stepconf Copying python script stepconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script import_mach.py Copying python script import_mach.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file spindle.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file halui_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisx.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/axis/extensions/_toglmodule.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisz.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisu.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisv.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisa.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script tests.py Copying python script tests.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file help.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file mesa0.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file mesa1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script private_data.py Copying python script private_data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file external.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file screen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file vcp.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file x_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file x_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file y_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pncconf Copying python script pncconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file y_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file z_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file z_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script data.py Copying python script data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file a_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file a_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file s_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file realtime.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file dialogs.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gremlin Copying python script gremlin make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gremlin.py Copying python script gremlin.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qt5_graphics.py Copying python script qt5_graphics.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gscreen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gscreen2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gscreen Copying python script gscreen make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script keybindings.py Copying python script keybindings.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pyui Copying python script pyui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script master.py Copying python script master.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying INI script panelui_spec.ini cp emc/usr_intf/pyui/panelui_spec.ini ../lib/python/pyui/panelui_spec.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying INI script _panelui.ini cp emc/usr_intf/pyui/_panelui.ini ../lib/python/pyui/_panelui.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script __init__.py Copying python script __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script commands.py Copying python script commands.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script panelui_validate.py Copying python script panelui_validate.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtvcp Copying python script qtvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script dialogs.py Copying python script dialogs.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script getiniinfo.py Copying python script getiniinfo.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script notification.py Copying python script notification.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script player.py Copying python script player.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gmoccapy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gmoccapy Copying python script gmoccapy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script icon_theme_helper.py Copying python script icon_theme_helper.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-materials Copying python script qtplasmac-materials make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-plasmac2qt Copying python script qtplasmac-plasmac2qt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-cfg2prefs Copying python script qtplasmac-cfg2prefs make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pmx485-test Copying python script pmx485-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac_gcode Copying python script qtplasmac_gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script M190 Copying python script M190 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdro Copying python script mdro make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script update_ini Copying python script update_ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/halmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/debounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/enum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/counter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/boss_plc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/encoder_ratio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/mux_generic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/lcd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/siggen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/threads.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/supply.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/weighted_sum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/sim_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/pid.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/streamer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/modmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/sampler.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_speaker.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/gcodemodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/cpuinfo.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/axis/extensions/emcmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_pi_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_bb_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/bitfile.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/bspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/abs_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/dpll.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_ppmc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hostmot2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_gm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/inm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/inmux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/led.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/ioport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/raw.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/rcpwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pktuart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/resolver.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/outm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/ssr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/tp_pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/tram.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_pci.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i43.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/lineardeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i90.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/xy2mod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/rotarydeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_spi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/module_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/setsserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/sserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/utils/scope_rt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/trivkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/maxkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_rpspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rotatekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/tripodkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/kins_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_eth.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/corexykins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/lineardeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rosekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rotarydeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/userkfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/scorbot-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/switchkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/pentakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/xyzac-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/xyzbc-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genhexkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/scarakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/trtfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/pumakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/cubic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/5axiskins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/homemod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tpmod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tcq.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/spherical_arc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/motion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' config.status: creating ../scripts/setup_designer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/command.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/homing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/control.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script halcompile Copying python script halcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking liblinuxcnc.a make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/blendmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnc_module_helper make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library liblinuxcncini.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' tooldata: depends: objects/emc/tooldata/tooldata_mmap.o objects/emc/tooldata/tooldata_common.o objects/emc/tooldata/tooldata_db.o tooldata: Linking: libtooldata.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing abs.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing abs_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing and2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module _togl.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module lineardeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/lineardeltakins.so objects/emc/kinematics/lineardeltakins.o -lboost_python311-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing anglejog.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bin2gray.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing axistest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library liblinuxcnchal.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing biquad.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bitwise.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module rotarydeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/rotarydeltakins.so objects/emc/kinematics/rotarydeltakins.o -lboost_python311-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bldc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing blend.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing charge_pump.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing carousel.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarke2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarke3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarkeinv.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing comp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing constant.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing corexy_by_hal.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing dbounce.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ddt.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing deadzone.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing demux.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing differential.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing div2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing edge.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing eoffset_per_angle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing estop_latch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing feedcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing flipflop.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing filter_kalman.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gantry.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gearchange.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gray2bin.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing histobins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing homecomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing hypot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ilowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing integ.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing invert.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library libposemath.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing joyhandle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing knob2float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing latencybins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit1.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit_axis.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lut5.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing maj3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing match8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing max31855.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_pktgyro_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing millturn.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing minmax.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing message.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing moveoff.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mult2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing multiclick.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing multiswitch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux16.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux4.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing near.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing not.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing offset.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing or2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ohmic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing oneshot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing orient.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sample_hold.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing scale.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing select8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing scaled_s32_sums.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing plasmac.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_home_switch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_axis_hardware.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_matrix_kb.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_parport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing simple_tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sphereprobe.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing spindle_monitor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing steptest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sum2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thcud.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing threadtest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing time.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing timedelay.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing timedelta.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tof.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking rtapi_app make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing toggle2nist.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing toggle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ton.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tristate_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tristate_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing userkins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing updown.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing wcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xor2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xhc_hb04_util.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xyzab_tdr_kins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing serport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_7i65.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_uart.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/abs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/abs_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/and2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bin2gray.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/axistest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bitslice.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bitwise.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/blend.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/biquad.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/anglejog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/charge_pump.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarke2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarke3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/constant.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/comp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarkeinv.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_float_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_float_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/carousel.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/corexy_by_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/dbounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ddt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/deadzone.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/differential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/demux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bldc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/edge.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/div2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/estop_latch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/feedcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/flipflop.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gray2bin.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gearchange.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/eoffset_per_angle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/filter_kalman.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/homecomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gantry.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/histobins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/hypot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/integ.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ilowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/knob2float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/invert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit1.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/latencybins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/joyhandle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lincurve.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/logic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lut5.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/maj3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit_axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/match8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/message.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/minmax.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mult2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mesa_pktgyro_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/millturn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/max31855.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/multiclick.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/multiswitch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux16.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux4.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/not.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/offset.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/near.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/or2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/moveoff.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ohmic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sample_hold.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/scale.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/orient.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/select8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/scaled_s32_sums.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_home_switch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sphereprobe.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sum2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/spindle_monitor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/steptest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/threadtest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_axis_hardware.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/thc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/timedelay.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/thcud.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/time.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/timedelta.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/toggle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/toggle2nist.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tof.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ton.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tristate_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tristate_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/wcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/updown.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xor2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/userkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/serport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/boss_plc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/debounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xhc_hb04_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/mesa_uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xyzab_tdr_kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/enum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/counter.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/stepgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/encoder_ratio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lcd.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/mesa_7i65.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux_generic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pwmgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/threads.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pid.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/siggen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/supply.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/watchdog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/weighted_sum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/modmath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/streamer.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sampler.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_speaker.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_ppmc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_gm.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_bb_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_pi_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_pci.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_7i43.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_7i90.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/setsserial.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_eth.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hostmot2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_spi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_rpspi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scope_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/classicladder_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_lib.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/trivkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/maxkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rotatekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tripodkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/corexykins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lineardeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rosekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pentakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rotarydeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scorbot-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/genhexkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/genserkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzac-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzbc-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf liblinuxcncini.so.0 ../lib/liblinuxcncini.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scarakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pumakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/5axiskins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libposemath.so.0 ../lib/libposemath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf liblinuxcnchal.so.0 ../lib/liblinuxcnchal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/homemod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/motmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tpmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage abs.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage abs_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage and2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage anglejog.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage axistest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bin2gray.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bitslice.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage biquad.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bitwise.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage blend.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bldc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage carousel.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking inivar make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage charge_pump.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarke3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarke2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarkeinv.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage comp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage constant.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_float_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_float_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage corexy_by_hal.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage dbounce.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ddt.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage deadzone.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage demux.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage differential.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage div2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/plasmac.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage edge.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage eoffset_per_angle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage estop_latch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage feedcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage filter_kalman.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage flipflop.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gantry.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gearchange.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gray2bin.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage histobins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage homecomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage hypot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ilowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage integ.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage invert.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage joyhandle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage knob2float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage latencybins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit1.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit_axis.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lincurve.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage logic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lut5.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage maj3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage match8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_pktgyro_test.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage max31855.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage message.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage millturn.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage minmax.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mult2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage moveoff.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage multiclick.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage multiswitch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux16.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux4.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage near.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage not.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage offset.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage oneshot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ohmic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage or2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage orient.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sample_hold.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage scale.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage scaled_s32_sums.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage plasmac.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage select8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_home_switch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_axis_hardware.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_matrix_kb.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage simple_tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_parport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sphereprobe.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage spindle_monitor.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sum2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage steptest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage threadtest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thcud.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage time.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage timedelay.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage timedelta.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tof.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage toggle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage toggle2nist.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ton.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tristate_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tristate_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage updown.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage userkins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage wcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xhc_hb04_util.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xor2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xyzab_tdr_kins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tpcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage serport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_7i65.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_uart.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thermistor.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halstreamer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halsampler make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking panelui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking shuttle make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thermistor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hy_gt_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking svd-ps_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking gs2_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking sendkeys make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking xhc-hb04 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking vfs11_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halmeter make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing wj200_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking mb2hal make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing pi500_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking vfdb_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hy_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libtooldata.so.0 ../lib/libtooldata.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' emc/Submakefile:Linking genserkins make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/abs.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/abs_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/and2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/anglejog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/axistest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bin2gray.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/biquad.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bitslice.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bitwise.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bldc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halcmd hal/utils/../hal_priv.h:135:27: warning: type of 'hal_data' does not match original declaration [-Wlto-type-mismatch] 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:246:16: note: type 'struct hal_data_t' should match type 'struct hal_data_t' 246 | typedef struct hal_data_t { | ^ hal/utils/../hal_priv.h:135:27: note: 'hal_data' was previously declared here 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:135:27: note: code may be misoptimized unless '-fno-strict-aliasing' is used make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/blend.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/carousel.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/charge_pump.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halscope make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarke2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarke3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarkeinv.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/comp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/constant.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_float_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_float_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/corexy_by_hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/dbounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ddt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/deadzone.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/demux.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/differential.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module _hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking libpyplugin.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,libpyplugin.so.0 -shared -o ../lib/libpyplugin.so.0 objects/emc/pythonplugin/python_plugin.o ../lib/liblinuxcncini.so -lstdc++ -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/div2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/edge.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/eoffset_per_angle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/estop_latch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/feedcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/filter_kalman.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/flipflop.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gantry.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gearchange.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gray2bin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/histobins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/homecomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hypot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ilowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/integ.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/invert.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/joyhandle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/knob2float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/latencybins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit1.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit_axis.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lincurve.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/logic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/maj3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lut5.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/match8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_pktgyro_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/max31855.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/message.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/millturn.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/minmax.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/moveoff.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mult2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/multiclick.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/multiswitch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux16.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux4.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/near.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/not.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/offset.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ohmic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/oneshot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/or2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/orient.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sample_hold.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/plasmac.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scale.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scaled_s32_sums.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/select8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_home_switch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking xhc-whb04b-6 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_axis_hardware.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/simple_tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sphereprobe.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/spindle_monitor.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/steptest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sum2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/thc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/thcud.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/threadtest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/time.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/timedelay.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/timedelta.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tof.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/toggle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/toggle2nist.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ton.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tristate_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tristate_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/updown.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/wcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/userkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xor2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xhc_hb04_util.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzab_tdr_kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/serport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libpyplugin.so.0 ../lib/libpyplugin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_7i65.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_uart.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling objects/hal/user_comps/thermistor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/wj200_vfd/wj200_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/pi500_vfd/pi500_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking thermistor make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking wj200_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking pi500_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking classicladder make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library libnml.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libnml.so.0 ../lib/libnml.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcncrsh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcncsvr make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking schedrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnclcd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking motion-logger make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking librs274.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,librs274.so.0 -shared -o ../lib/librs274.so.0 objects/emc/rs274ngc/interp_arc.o objects/emc/rs274ngc/interp_array.o objects/emc/rs274ngc/interp_base.o objects/emc/rs274ngc/interp_check.o objects/emc/rs274ngc/interp_convert.o objects/emc/rs274ngc/interp_queue.o objects/emc/rs274ngc/interp_cycles.o objects/emc/rs274ngc/interp_execute.o objects/emc/rs274ngc/interp_find.o objects/emc/rs274ngc/interp_internal.o objects/emc/rs274ngc/interp_inverse.o objects/emc/rs274ngc/interp_read.o objects/emc/rs274ngc/interp_write.o objects/emc/rs274ngc/interp_o_word.o objects/emc/rs274ngc/interp_g7x.o objects/emc/rs274ngc/modal_state.o objects/emc/rs274ngc/nurbs_additional_functions.o objects/emc/rs274ngc/interp_namedparams.o objects/emc/rs274ngc/interp_python.o objects/emc/rs274ngc/interp_remap.o objects/emc/rs274ngc/interp_setup.o objects/emc/rs274ngc/canonmodule.o objects/emc/rs274ngc/pyparamclass.o objects/emc/rs274ngc/pyemctypes.o objects/emc/rs274ngc/pyinterp1.o objects/emc/rs274ngc/pyblock.o objects/emc/rs274ngc/pyarrays.o objects/emc/rs274ngc/interpmodule.o objects/emc/rs274ngc/rs274ngc_pre.o objects/emc/rs274ngc/interp_inspection.o ../lib/liblinuxcncini.so ../lib/libpyplugin.so ../lib/liblinuxcnchal.so.0 ../lib/libtooldata.so.0 -lstdc++ -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf librs274.so.0 ../lib/librs274.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking io make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' emc/tooldata/tool_watch.cc: In function 'int main(int, char**)': emc/tooldata/tool_watch.cc:56:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 56 | fprintf(stderr,"%8ld EMC_STAT\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:57:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 57 | fprintf(stderr,"%8ld EMC_IO_STAT\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:58:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 58 | fprintf(stderr,"%8ld EMC_TOOL_STAT\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:59:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 59 | fprintf(stderr,"%8ld EMC_COOLANT_STAT\n",sizeof(EMC_COOLANT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:60:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 60 | fprintf(stderr,"%8ld EMC_AUX_STAT\n",sizeof(EMC_AUX_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:61:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 61 | fprintf(stderr,"%8ld EMC_LUBE_STAT\n",sizeof(EMC_LUBE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:62:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 62 | fprintf(stderr,"%8ld EMC_TASK_STAT\n",sizeof(EMC_TASK_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:63:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 63 | fprintf(stderr,"%8ld EMC_MOTION_STAT\n",sizeof(EMC_MOTION_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:64:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 64 | fprintf(stderr,"%8ld EMC_TRAJ_STAT\n",sizeof(EMC_TRAJ_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:65:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 65 | fprintf(stderr,"%8ld EMC_JOINT_STAT\n",sizeof(EMC_JOINT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:66:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 66 | fprintf(stderr,"%8ld EMC_AXIS_STAT\n",sizeof(EMC_AXIS_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:67:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 67 | fprintf(stderr,"%8ld EMC_SPINDLE_STAT\n",sizeof(EMC_SPINDLE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking iov2 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking canterp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module gcode.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/gcode.so objects/emc/rs274ngc/gcodemodule.o ../lib/librs274.so.0 -lstdc++ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking rs274 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking milltask c++ -std=gnu++17 -o ../bin/milltask objects/emc/motion/emcmotglb.o objects/emc/task/emctask.o objects/emc/task/emccanon.o objects/emc/task/emctaskmain.o objects/emc/motion/usrmotintf.o objects/emc/motion/emcmotutil.o objects/emc/task/taskintf.o objects/emc/motion/dbuf.o objects/emc/motion/stashf.o objects/emc/task/taskmodule.o objects/emc/task/taskclass.o objects/emc/task/backtrace.o ../lib/librs274.so.0 ../lib/liblinuxcnc.a ../lib/libnml.so.0 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/liblinuxcnchal.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' + popd ~/RPM/BUILD/linuxcnc-2.9.1 + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.52575 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/linuxcnc-buildroot + : + /bin/rm -rf -- /usr/src/tmp/linuxcnc-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/games + cd linuxcnc-2.9.1 + pushd src ~/RPM/BUILD/linuxcnc-2.9.1/src ~/RPM/BUILD/linuxcnc-2.9.1 + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/linuxcnc-buildroot make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/bin \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../rtlib/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules /usr/libexec/rpm-build/install -p -m 4755 ../bin/linuxcnc_module_helper /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 4755 ../bin/rtapi_app /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../scripts/rtapi.conf /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/src/tmp/linuxcnc-buildroot/usr/lib \ /usr/src/tmp/linuxcnc-buildroot/lib/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles \ /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/*.py ../lib/python/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/rs274/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/touchy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gscreen/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/*.{py,ui,txt} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/designer/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/widget_icons/*.{png,gif} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/plugins/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins cp -dR ../lib/python/qtvcp/lib/* /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gmoccapy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/*.{py,png,glade} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/stepconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pncconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pyui/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/plasmac/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0755 ../bin/stepconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pncconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_input /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mitsub_vfd /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mqtt-publisher /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/z_level_compensation /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pmx485 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/sim-torch /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gladevcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis-remote /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/debuglevel /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/linuxcnctop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mdi /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_manualtoolchange /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/image-to-gcode /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/touchy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gscreen /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../lib/python/qtvcp/designer/install_script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -m 0755 ../bin/gmoccapy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/teach-in /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/scorbot-er-3 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pumagui ../bin/puma560gui ../bin/lineardelta ../bin/scaragui ../bin/hexagui ../bin/5axisgui ../bin/max5gui ../bin/maho600gui ../bin/hbmgui ../bin/rotarydelta ../bin/melfagui ../bin/millturngui ../bin/xyzac-trt-gui ../bin/xyzbc-trt-gui ../bin/xyzab-tdr-gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtplasmac-materials ../bin/qtplasmac-plasmac2qt ../bin/qtplasmac-cfg2prefs ../bin/qtplasmac_gcode ../bin/pmx485-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/linuxcnc-wizard.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/images/*.{png,gif,xbm,ngc} /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/tcl/*.tcl /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl /usr/libexec/rpm-build/install -p -m 0644 ../share/gscreen/images/*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images cp -dR ../share/gscreen/skins/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins cp -dR ../share/qtvcp/images/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images cp -dR ../share/qtvcp/screens/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens cp -dR ../share/qtvcp/panels/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels cp -dR ../share/qtvcp/widgets_ui/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui cp -dR ../share/gmoccapy/icons/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man1/*.1 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/hal_add_funct_to_thread.3hal ../docs/man/man3/hal_bit_t.3hal ../docs/man/man3/hal_bool.3hal ../docs/man/man3/hal_create_thread.3hal ../docs/man/man3/hal_del_funct_from_thread.3hal ../docs/man/man3/hal_exit.3hal ../docs/man/man3/hal_export_funct.3hal ../docs/man/man3/hal_float_t.3hal ../docs/man/man3/hal_get_lock.3hal ../docs/man/man3/hal_init.3hal ../docs/man/man3/hal_link.3hal ../docs/man/man3/hal_malloc.3hal ../docs/man/man3/hal_param_alias.3hal ../docs/man/man3/hal_param_bit_new.3hal ../docs/man/man3/hal_param_bit_newf.3hal ../docs/man/man3/hal_param_float_new.3hal ../docs/man/man3/hal_param_float_newf.3hal ../docs/man/man3/hal_param_new.3hal ../docs/man/man3/hal_param_s32_new.3hal ../docs/man/man3/hal_param_s32_newf.3hal ../docs/man/man3/hal_param_u32_new.3hal ../docs/man/man3/hal_param_u32_newf.3hal ../docs/man/man3/hal_parport.3hal ../docs/man/man3/hal_pin_alias.3hal ../docs/man/man3/hal_pin_bit_new.3hal ../docs/man/man3/hal_pin_bit_newf.3hal ../docs/man/man3/hal_pin_float_new.3hal ../docs/man/man3/hal_pin_float_newf.3hal ../docs/man/man3/hal_pin_new.3hal ../docs/man/man3/hal_pin_port_new.3hal ../docs/man/man3/hal_pin_port_newf.3hal ../docs/man/man3/hal_pin_s32_new.3hal ../docs/man/man3/hal_pin_s32_newf.3hal ../docs/man/man3/hal_pin_u32_new.3hal ../docs/man/man3/hal_pin_u32_newf.3hal ../docs/man/man3/hal_port.3hal ../docs/man/man3/hal_ready.3hal ../docs/man/man3/hal_s32_t.3hal ../docs/man/man3/hal_set_constructor.3hal ../docs/man/man3/hal_set_lock.3hal ../docs/man/man3/hal_signal_delete.3hal ../docs/man/man3/hal_signal_new.3hal ../docs/man/man3/hal_start_threads.3hal ../docs/man/man3/hal_stream.3hal ../docs/man/man3/hal_type_t.3hal ../docs/man/man3/hal_u32_t.3hal ../docs/man/man3/hal_unlink.3hal ../docs/man/man3/intro.3hal ../docs/man/man3/undocumented.3hal /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/EXPORT_FUNCTION.3rtapi ../docs/man/man3/MODULE_AUTHOR.3rtapi ../docs/man/man3/MODULE_DESCRIPTION.3rtapi ../docs/man/man3/MODULE_LICENSE.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi ../docs/man/man3/RTAPI_MP_INT.3rtapi ../docs/man/man3/RTAPI_MP_LONG.3rtapi ../docs/man/man3/RTAPI_MP_STRING.3rtapi ../docs/man/man3/intro.3rtapi ../docs/man/man3/rtapi_app_exit.3rtapi ../docs/man/man3/rtapi_app_main.3rtapi ../docs/man/man3/rtapi_atomic.3rtapi ../docs/man/man3/rtapi_bool.3rtapi ../docs/man/man3/rtapi_byteorder.3rtapi ../docs/man/man3/rtapi_clock_set_period.3rtapi ../docs/man/man3/rtapi_delay.3rtapi ../docs/man/man3/rtapi_delay_max.3rtapi ../docs/man/man3/rtapi_device.3rtapi ../docs/man/man3/rtapi_div_u64.3rtapi ../docs/man/man3/rtapi_div_u64_rem.3rtapi ../docs/man/man3/rtapi_exit.3rtapi ../docs/man/man3/rtapi_firmware.3rtapi ../docs/man/man3/rtapi_get_clocks.3rtapi ../docs/man/man3/rtapi_get_msg_level.3rtapi ../docs/man/man3/rtapi_get_time.3rtapi ../docs/man/man3/rtapi_gfp.3rtapi ../docs/man/man3/rtapi_inb.3rtapi ../docs/man/man3/rtapi_init.3rtapi ../docs/man/man3/rtapi_io.3rtapi ../docs/man/man3/rtapi_is.3rtapi ../docs/man/man3/rtapi_list.3rtapi ../docs/man/man3/rtapi_module_param.3rtapi ../docs/man/man3/rtapi_mutex.3rtapi ../docs/man/man3/rtapi_open_as_root.3rtapi ../docs/man/man3/rtapi_outb.3rtapi ../docs/man/man3/rtapi_parport.3rtapi ../docs/man/man3/rtapi_pci.3rtapi ../docs/man/man3/rtapi_print.3rtapi ../docs/man/man3/rtapi_prio.3rtapi ../docs/man/man3/rtapi_prio_highest.3rtapi ../docs/man/man3/rtapi_prio_lowest.3rtapi ../docs/man/man3/rtapi_prio_next_higher.3rtapi ../docs/man/man3/rtapi_prio_next_lower.3rtapi ../docs/man/man3/rtapi_region.3rtapi ../docs/man/man3/rtapi_release_region.3rtapi ../docs/man/man3/rtapi_request_region.3rtapi ../docs/man/man3/rtapi_set_msg_level.3rtapi ../docs/man/man3/rtapi_shmem.3rtapi ../docs/man/man3/rtapi_shmem_delete.3rtapi ../docs/man/man3/rtapi_shmem_getptr.3rtapi ../docs/man/man3/rtapi_shmem_new.3rtapi ../docs/man/man3/rtapi_slab.3rtapi ../docs/man/man3/rtapi_snprintf.3rtapi ../docs/man/man3/rtapi_stdint.3rtapi ../docs/man/man3/rtapi_string.3rtapi ../docs/man/man3/rtapi_strlcpy.3rtapi ../docs/man/man3/rtapi_task_delete.3rtapi ../docs/man/man3/rtapi_task_new.3rtapi ../docs/man/man3/rtapi_task_pause.3rtapi ../docs/man/man3/rtapi_task_resume.3rtapi ../docs/man/man3/rtapi_task_self.3rtapi ../docs/man/man3/rtapi_task_start.3rtapi ../docs/man/man3/rtapi_task_wait.3rtapi ../docs/man/man3/undocumented.3rtapi /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man9/abs.9 ../docs/man/man9/abs_s32.9 ../docs/man/man9/and2.9 ../docs/man/man9/anglejog.9 ../docs/man/man9/at_pid.9 ../docs/man/man9/axis.9 ../docs/man/man9/axistest.9 ../docs/man/man9/bin2gray.9 ../docs/man/man9/biquad.9 ../docs/man/man9/bitslice.9 ../docs/man/man9/bitwise.9 ../docs/man/man9/bldc.9 ../docs/man/man9/blend.9 ../docs/man/man9/carousel.9 ../docs/man/man9/charge_pump.9 ../docs/man/man9/clarke2.9 ../docs/man/man9/clarke3.9 ../docs/man/man9/clarkeinv.9 ../docs/man/man9/classicladder.9 ../docs/man/man9/comp.9 ../docs/man/man9/constant.9 ../docs/man/man9/conv_bit_float.9 ../docs/man/man9/conv_bit_s32.9 ../docs/man/man9/conv_bit_u32.9 ../docs/man/man9/conv_float_s32.9 ../docs/man/man9/conv_float_u32.9 ../docs/man/man9/conv_s32_bit.9 ../docs/man/man9/conv_s32_float.9 ../docs/man/man9/conv_s32_u32.9 ../docs/man/man9/conv_u32_bit.9 ../docs/man/man9/conv_u32_float.9 ../docs/man/man9/conv_u32_s32.9 ../docs/man/man9/corexy_by_hal.9 ../docs/man/man9/counter.9 ../docs/man/man9/dbounce.9 ../docs/man/man9/ddt.9 ../docs/man/man9/deadzone.9 ../docs/man/man9/debounce.9 ../docs/man/man9/demux.9 ../docs/man/man9/differential.9 ../docs/man/man9/div2.9 ../docs/man/man9/edge.9 ../docs/man/man9/encoder.9 ../docs/man/man9/encoder_ratio.9 ../docs/man/man9/enum.9 ../docs/man/man9/eoffset_per_angle.9 ../docs/man/man9/estop_latch.9 ../docs/man/man9/feedcomp.9 ../docs/man/man9/filter_kalman.9 ../docs/man/man9/flipflop.9 ../docs/man/man9/gantry.9 ../docs/man/man9/gantrykins.9 ../docs/man/man9/gearchange.9 ../docs/man/man9/genhexkins.9 ../docs/man/man9/genserkins.9 ../docs/man/man9/gentrivkins.9 ../docs/man/man9/gladevcp.9 ../docs/man/man9/gray2bin.9 ../docs/man/man9/hal_bb_gpio.9 ../docs/man/man9/hal_parport.9 ../docs/man/man9/histobins.9 ../docs/man/man9/hm2_7i43.9 ../docs/man/man9/hm2_7i90.9 ../docs/man/man9/hm2_eth.9 ../docs/man/man9/hm2_pci.9 ../docs/man/man9/hm2_rpspi.9 ../docs/man/man9/hm2_spi.9 ../docs/man/man9/homecomp.9 ../docs/man/man9/hostmot2.9 ../docs/man/man9/hypot.9 ../docs/man/man9/ilowpass.9 ../docs/man/man9/integ.9 ../docs/man/man9/invert.9 ../docs/man/man9/joyhandle.9 ../docs/man/man9/kins.9 ../docs/man/man9/knob2float.9 ../docs/man/man9/latencybins.9 ../docs/man/man9/lcd.9 ../docs/man/man9/limit1.9 ../docs/man/man9/limit2.9 ../docs/man/man9/limit3.9 ../docs/man/man9/limit_axis.9 ../docs/man/man9/lincurve.9 ../docs/man/man9/lineardeltakins.9 ../docs/man/man9/logic.9 ../docs/man/man9/lowpass.9 ../docs/man/man9/lut5.9 ../docs/man/man9/maj3.9 ../docs/man/man9/match8.9 ../docs/man/man9/matrix_kb.9 ../docs/man/man9/max31855.9 ../docs/man/man9/maxkins.9 ../docs/man/man9/mesa_7i65.9 ../docs/man/man9/mesa_pktgyro_test.9 ../docs/man/man9/mesa_uart.9 ../docs/man/man9/message.9 ../docs/man/man9/millturn.9 ../docs/man/man9/minmax.9 ../docs/man/man9/motion.9 ../docs/man/man9/moveoff.9 ../docs/man/man9/mult2.9 ../docs/man/man9/multiclick.9 ../docs/man/man9/multiswitch.9 ../docs/man/man9/mux16.9 ../docs/man/man9/mux2.9 ../docs/man/man9/mux4.9 ../docs/man/man9/mux8.9 ../docs/man/man9/mux_generic.9 ../docs/man/man9/near.9 ../docs/man/man9/not.9 ../docs/man/man9/offset.9 ../docs/man/man9/ohmic.9 ../docs/man/man9/oneshot.9 ../docs/man/man9/opto_ac5.9 ../docs/man/man9/or2.9 ../docs/man/man9/orient.9 ../docs/man/man9/pentakins.9 ../docs/man/man9/pid.9 ../docs/man/man9/plasmac.9 ../docs/man/man9/pumakins.9 ../docs/man/man9/pwmgen.9 ../docs/man/man9/rosekins.9 ../docs/man/man9/rotatekins.9 ../docs/man/man9/sample_hold.9 ../docs/man/man9/sampler.9 ../docs/man/man9/scale.9 ../docs/man/man9/scaled_s32_sums.9 ../docs/man/man9/scarakins.9 ../docs/man/man9/select8.9 ../docs/man/man9/serport.9 ../docs/man/man9/setsserial.9 ../docs/man/man9/siggen.9 ../docs/man/man9/sim_axis_hardware.9 ../docs/man/man9/sim_encoder.9 ../docs/man/man9/sim_home_switch.9 ../docs/man/man9/sim_matrix_kb.9 ../docs/man/man9/sim_parport.9 ../docs/man/man9/sim_spindle.9 ../docs/man/man9/simple_tp.9 ../docs/man/man9/sphereprobe.9 ../docs/man/man9/spindle.9 ../docs/man/man9/spindle_monitor.9 ../docs/man/man9/sserial.9 ../docs/man/man9/stepgen.9 ../docs/man/man9/steptest.9 ../docs/man/man9/streamer.9 ../docs/man/man9/sum2.9 ../docs/man/man9/supply.9 ../docs/man/man9/thc.9 ../docs/man/man9/thcud.9 ../docs/man/man9/threads.9 ../docs/man/man9/threadtest.9 ../docs/man/man9/time.9 ../docs/man/man9/timedelay.9 ../docs/man/man9/timedelta.9 ../docs/man/man9/tof.9 ../docs/man/man9/toggle.9 ../docs/man/man9/toggle2nist.9 ../docs/man/man9/ton.9 ../docs/man/man9/tp.9 ../docs/man/man9/tpcomp.9 ../docs/man/man9/tripodkins.9 ../docs/man/man9/tristate_bit.9 ../docs/man/man9/tristate_float.9 ../docs/man/man9/trivkins.9 ../docs/man/man9/updown.9 ../docs/man/man9/userkins.9 ../docs/man/man9/watchdog.9 ../docs/man/man9/wcomp.9 ../docs/man/man9/weighted_sum.9 ../docs/man/man9/xhc_hb04_util.9 ../docs/man/man9/xor2.9 ../docs/man/man9/xyzab_tdr_kins.9 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 /usr/libexec/rpm-build/install -p -m 0644 objects/*.msg /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs /usr/libexec/rpm-build/install -p -m 0755 ../scripts/realtime /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halrun /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halcmd_twopass /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/haltcl /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/simulate_probe /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/sim_pin /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../*.png ../*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../lib/hallib/* /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -m 0644 ../tcl/*.png /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc # install all the sample configs, including subdirs (tar is required on debian systems, and common on others) /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs ((cd ../configs && tar --exclude CVS --exclude .cvsignore --exclude .gitignore -cf - .) | (cd /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs && tar -xf -)) /usr/libexec/rpm-build/install -p -m 0755 ../bin/inivar ../bin/halstreamer ../bin/halsampler ../bin/panelui ../bin/mb2hal ../bin/gs2_vfd ../bin/hy_gt_vfd ../bin/svd-ps_vfd ../bin/shuttle ../bin/xhc-hb04 ../bin/sendkeys ../bin/thermistor ../bin/vfs11_vfd ../bin/classicladder ../bin/halcmd ../bin/halrmt ../bin/halmeter ../bin/halscope ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../bin/vfdb_vfd ../bin/wj200_vfd ../bin/pi500_vfd ../bin/hy_vfd ../bin/xhc-whb04b-6 ../bin/linuxcncrsh ../bin/schedrmt ../bin/linuxcnclcd ../bin/halui ../bin/linuxcncsvr ../bin/milltask ../bin/io ../bin/iov2 ../bin/genserkins ../bin/rs274 ../bin/motion-logger ../bin/tool_mmap_read ../bin/tool_watch ../bin/tooledit ../bin/ngcgui ../bin/pyngcgui ../bin/gremlin_view ../bin/halshow /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_info /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/setup_designer /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_var /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/monitor-xhc-hb04 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-plot /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/moveoff_gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/hal-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/xhc-hb04-accels /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/pyvcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/gladevcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcncmkdesktop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/update_ini /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halreport /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/libnml.so.0 ../lib/liblinuxcnchal.so.0 ../lib/liblinuxcnc.a ../lib/librs274.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 /usr/src/tmp/linuxcnc-buildroot/usr/lib cp --no-dereference ../lib/liblinuxcnchal.so ../lib/liblinuxcncini.so ../lib/libnml.so ../lib/libposemath.so ../lib/libpyplugin.so ../lib/librs274.so ../lib/libtooldata.so /usr/src/tmp/linuxcnc-buildroot/usr/lib ldconfig /usr/src/tmp/linuxcnc-buildroot/usr/lib /bin/bash: line 1: ldconfig: command not found make: [Makefile:734: install-kernel-indep] Error 127 (ignored) /usr/libexec/rpm-build/install -p -m 0644 ../lib/linuxcnc/canterp.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../include/linuxcnc.h ../include/emcIniFile.hh ../include/iniaxis.hh ../include/inijoint.hh ../include/inispindle.hh ../include/initraj.hh ../include/inihal.hh ../include/cubic.h ../include/kinematics.h ../include/switchkins.h ../include/genhexkins.h ../include/genserkins.h ../include/pentakins.h ../include/pumakins.h ../include/tc.h ../include/tc_types.h ../include/tcq.h ../include/tp.h ../include/tp_types.h ../include/spherical_arc.h ../include/blendmath.h ../include/emcmotcfg.h ../include/motion.h ../include/homing.h ../include/simple_tp.h ../include/state_tag.h ../include/usrmotintf.h ../include/axis.h ../include/canon.hh ../include/canon_position.hh ../include/emctool.h ../include/emc.hh ../include/emc_nml.hh ../include/emccfg.h ../include/emcglb.h ../include/emcpos.h ../include/emcpose.h ../include/interp_return.hh ../include/interpl.hh ../include/motion_types.h ../include/debugflags.h ../include/interp_internal.hh ../include/interp_fwd.hh ../include/interp_base.hh ../include/modal_state.hh ../include/rs274ngc.hh ../include/saicanon.hh ../include/hal.h ../include/hal_parport.h ../include/hostmot2-serial.h ../include/locmem.hh ../include/memsem.hh ../include/phantom.hh ../include/physmem.hh ../include/recvn.h ../include/rem_msg.hh ../include/sendn.h ../include/shmem.hh ../include/tcpmem.hh ../include/cms.hh ../include/cms_aup.hh ../include/cms_cfg.hh ../include/cms_dup.hh ../include/cms_srv.hh ../include/cms_up.hh ../include/cms_user.hh ../include/cms_xup.hh ../include/cmsdiag.hh ../include/tcp_opts.hh ../include/tcp_srv.hh ../include/inifile.h ../include/inifile.hh ../include/linklist.hh ../include/cmd_msg.hh ../include/nml.hh ../include/nml_mod.hh ../include/nml_oi.hh ../include/nml_srv.hh ../include/nml_type.hh ../include/nmldiag.hh ../include/nmlmsg.hh ../include/stat_msg.hh ../include/_sem.h ../include/sem.hh ../include/_shm.h ../include/shm.hh ../include/_timer.h ../include/timer.hh ../include/posemath.h ../include/gotypes.h ../include/gomath.h ../include/sincos.h ../include/rcs.hh ../include/rcs_exit.hh ../include/rcs_print.hh ../include/rcsversion.h ../include/rtapi.h ../include/rtapi_app.h ../include/rtapi_atomic.h ../include/rtapi_bitops.h ../include/rtapi_bool.h ../include/rtapi_byteorder.h ../include/rtapi_device.h ../include/rtapi_firmware.h ../include/rtapi_gfp.h ../include/rtapi_io.h ../include/rtapi_limits.h ../include/rtapi_list.h ../include/rtapi_math.h ../include/rtapi_math_i386.h ../include/rtapi_math64.h ../include/rtapi_mutex.h ../include/rtapi_parport.h ../include/rtapi_pci.h ../include/rtapi_slab.h ../include/rtapi_stdint.h ../include/rtapi_ctype.h ../include/rtapi_errno.h ../include/rtapi_string.h ../include/rtapi_vsnprintf.h /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/ cp -dR ../nc_files/3D_Chips.html ../nc_files/3D_Chips.ngc ../nc_files/3D_Chips.pdf ../nc_files/3dtest.ngc ../nc_files/M101 ../nc_files/M102.c ../nc_files/arcspiral.ngc ../nc_files/b-index.ngc ../nc_files/cds.ngc ../nc_files/comp-g1.ngc ../nc_files/comp.ngc ../nc_files/comp311.ngc ../nc_files/comp311_2.ngc ../nc_files/cone.ngc ../nc_files/daisy.ngc ../nc_files/factorial.ngc ../nc_files/filtertest-gui.py ../nc_files/filtertest.py ../nc_files/flowsnake.ngc ../nc_files/flowsnake.py ../nc_files/g20sub.ngc ../nc_files/g76.ngc ../nc_files/g881.ngc ../nc_files/g881min.ngc ../nc_files/g882.ngc ../nc_files/gcmc_lib ../nc_files/gladevcp_lib ../nc_files/gmoccapy_2_tools_with_cutter_radius_compensation.ngc ../nc_files/gridprobe.ngc ../nc_files/hole-circle.ngc ../nc_files/holecircle.py ../nc_files/increment.ngc ../nc_files/involute.py ../nc_files/lathe-g76.ngc ../nc_files/lathe_g70_71_demo.ngc ../nc_files/lathe_g7x_face_boring.ngc ../nc_files/lathe_g7x_quadrants.ngc ../nc_files/lathe_pawn.ngc ../nc_files/lathecomp.ngc ../nc_files/m250.ngc ../nc_files/m61demo.ngc ../nc_files/m6demo.ngc ../nc_files/m6remap.ngc ../nc_files/m70m72-demo.ngc ../nc_files/m73-demo.ngc ../nc_files/m75.ngc ../nc_files/m76.ngc ../nc_files/macros ../nc_files/mmount.ngc ../nc_files/nestedcall.ngc ../nc_files/ngcgui_lib ../nc_files/offsets.ngc ../nc_files/orphans ../nc_files/plasmac ../nc_files/plasmatest.ngc ../nc_files/polar.ngc ../nc_files/probe ../nc_files/probe-hole.ngc ../nc_files/remap-subroutines ../nc_files/remap_lib ../nc_files/retval.ngc ../nc_files/roparams.ngc ../nc_files/skeleton.ngc ../nc_files/smartprobe.ngc ../nc_files/spiral.ngc ../nc_files/systems.ngc ../nc_files/testm6fail.ngc ../nc_files/threading.ngc ../nc_files/tool-length-probe.ngc ../nc_files/toplevel.ngc ../nc_files/tort.ngc ../nc_files/torus.png ../nc_files/touchoff.ngc ../nc_files/useful-subroutines.ngc ../nc_files/x-trim.ngc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0755 ../nc_files/M101 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0644 ../tcl/TkLinuxCNC /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/libexec/rpm-build/install -p -m 0644 Makefile.modinc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/linuxcnc.tcl ../tcl/ngcgui.tcl ../tcl/ngcgui_app.tcl ../tcl/ngcgui_ttt.tcl ../tcl/pkgIndex.tcl ../tcl/show_errors.tcl ../tcl/tklinuxcnc.tcl ../tcl/tooledit.tcl ../tcl/twopass.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/hal.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/linuxcnc.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/pkgIndex.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/bin/cbutton.tcl ../tcl/bin/emccalib.tcl ../tcl/bin/emcdebug.tcl ../tcl/bin/emctesting.tcl ../tcl/bin/emctuning.tcl ../tcl/bin/genedit.tcl ../tcl/bin/halconfig.tcl ../tcl/bin/halshow.tcl ../tcl/bin/pickconfig.tcl ../tcl/bin/tkbackplot.tcl ../tcl/bin/popimage /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin /usr/libexec/rpm-build/install -p -m 0644 ../tcl/scripts/balloon.tcl ../tcl/scripts/emchelp.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0755 ../tcl/scripts/Set_Coordinates.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/stepconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/touchy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen2.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/gmoccapy/gmoccapy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/pncconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gremlin_view.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/popupkeyboard.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc_big.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/hal_python.xml /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs/ /usr/libexec/rpm-build/install -p -m 0644 ../share/glade/pixmaps/hicolor/22x22/actions/widget*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions/ /usr/libexec/rpm-build/install -p -m 0644 ../share/gtksourceview-2.0/language-specs/*.lang /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs/ /usr/libexec/rpm-build/install -p -m 0644 ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ for d in ../share/applications/linuxcnc.desktop ../share/applications/linuxcnc-latency.desktop ../share/applications/linuxcnc-latency-histogram.desktop ../share/applications/linuxcnc-pncconf.desktop ../share/applications/linuxcnc-stepconf.desktop ; do \ /usr/libexec/rpm-build/install -p -m 0644 $d /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ ; \ done /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/README.adoc ../docs/INSTALL.adoc ../docs/AUTHORS /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/help/asciidoc-markup_es.adoc ../docs/help/rtfaults.adoc ../docs/help/rtfaults_es.adoc ../docs/help/tklinuxcnc.adoc /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/etc/axis_light_background /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/README /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/README.axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' + popd ~/RPM/BUILD/linuxcnc-2.9.1 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + cp debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + sed 's/Name=/Name=LinuxCNC /g' -i /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop + desktop-file-install --dir /usr/src/tmp/linuxcnc-buildroot/usr/share/applications --remove-key=Version --remove-category=X-CNC --remove-category=Utility /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc.desktop + cat + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps + convert linuxcncicon.png -resize 16x16 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps + convert linuxcncicon.png -resize 32x32 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps + convert linuxcncicon.png -resize 48x48 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps/linuxcncicon.png + pushd /usr/src/tmp/linuxcnc-buildroot/usr/share/man ~/tmp/linuxcnc-buildroot/usr/share/man ~/RPM/BUILD/linuxcnc-2.9.1 ++ find -name '*.?' + xz ./man9/xyzab_tdr_kins.9 ./man9/xor2.9 ./man9/xhc_hb04_util.9 ./man9/weighted_sum.9 ./man9/wcomp.9 ./man9/watchdog.9 ./man9/userkins.9 ./man9/updown.9 ./man9/trivkins.9 ./man9/tristate_float.9 ./man9/tristate_bit.9 ./man9/tripodkins.9 ./man9/tpcomp.9 ./man9/tp.9 ./man9/ton.9 ./man9/toggle2nist.9 ./man9/toggle.9 ./man9/tof.9 ./man9/timedelta.9 ./man9/timedelay.9 ./man9/time.9 ./man9/threadtest.9 ./man9/threads.9 ./man9/thcud.9 ./man9/thc.9 ./man9/supply.9 ./man9/sum2.9 ./man9/streamer.9 ./man9/steptest.9 ./man9/stepgen.9 ./man9/sserial.9 ./man9/spindle_monitor.9 ./man9/spindle.9 ./man9/sphereprobe.9 ./man9/simple_tp.9 ./man9/sim_spindle.9 ./man9/sim_parport.9 ./man9/sim_matrix_kb.9 ./man9/sim_home_switch.9 ./man9/sim_encoder.9 ./man9/sim_axis_hardware.9 ./man9/siggen.9 ./man9/setsserial.9 ./man9/serport.9 ./man9/select8.9 ./man9/scarakins.9 ./man9/scaled_s32_sums.9 ./man9/scale.9 ./man9/sampler.9 ./man9/sample_hold.9 ./man9/rotatekins.9 ./man9/rosekins.9 ./man9/pwmgen.9 ./man9/pumakins.9 ./man9/plasmac.9 ./man9/pid.9 ./man9/pentakins.9 ./man9/orient.9 ./man9/or2.9 ./man9/opto_ac5.9 ./man9/oneshot.9 ./man9/ohmic.9 ./man9/offset.9 ./man9/not.9 ./man9/near.9 ./man9/mux_generic.9 ./man9/mux8.9 ./man9/mux4.9 ./man9/mux2.9 ./man9/mux16.9 ./man9/multiswitch.9 ./man9/multiclick.9 ./man9/mult2.9 ./man9/moveoff.9 ./man9/motion.9 ./man9/minmax.9 ./man9/millturn.9 ./man9/message.9 ./man9/mesa_uart.9 ./man9/mesa_pktgyro_test.9 ./man9/mesa_7i65.9 ./man9/maxkins.9 ./man9/max31855.9 ./man9/matrix_kb.9 ./man9/match8.9 ./man9/maj3.9 ./man9/lut5.9 ./man9/lowpass.9 ./man9/logic.9 ./man9/lineardeltakins.9 ./man9/lincurve.9 ./man9/limit_axis.9 ./man9/limit3.9 ./man9/limit2.9 ./man9/limit1.9 ./man9/lcd.9 ./man9/latencybins.9 ./man9/knob2float.9 ./man9/kins.9 ./man9/joyhandle.9 ./man9/invert.9 ./man9/integ.9 ./man9/ilowpass.9 ./man9/hypot.9 ./man9/hostmot2.9 ./man9/homecomp.9 ./man9/hm2_spi.9 ./man9/hm2_rpspi.9 ./man9/hm2_pci.9 ./man9/hm2_eth.9 ./man9/hm2_7i90.9 ./man9/hm2_7i43.9 ./man9/histobins.9 ./man9/hal_parport.9 ./man9/hal_bb_gpio.9 ./man9/gray2bin.9 ./man9/gladevcp.9 ./man9/gentrivkins.9 ./man9/genserkins.9 ./man9/genhexkins.9 ./man9/gearchange.9 ./man9/gantrykins.9 ./man9/gantry.9 ./man9/flipflop.9 ./man9/filter_kalman.9 ./man9/feedcomp.9 ./man9/estop_latch.9 ./man9/eoffset_per_angle.9 ./man9/enum.9 ./man9/encoder_ratio.9 ./man9/encoder.9 ./man9/edge.9 ./man9/div2.9 ./man9/differential.9 ./man9/demux.9 ./man9/debounce.9 ./man9/deadzone.9 ./man9/ddt.9 ./man9/dbounce.9 ./man9/counter.9 ./man9/corexy_by_hal.9 ./man9/conv_u32_s32.9 ./man9/conv_u32_float.9 ./man9/conv_u32_bit.9 ./man9/conv_s32_u32.9 ./man9/conv_s32_float.9 ./man9/conv_s32_bit.9 ./man9/conv_float_u32.9 ./man9/conv_float_s32.9 ./man9/conv_bit_u32.9 ./man9/conv_bit_s32.9 ./man9/conv_bit_float.9 ./man9/constant.9 ./man9/comp.9 ./man9/classicladder.9 ./man9/clarkeinv.9 ./man9/clarke3.9 ./man9/clarke2.9 ./man9/charge_pump.9 ./man9/carousel.9 ./man9/blend.9 ./man9/bldc.9 ./man9/bitwise.9 ./man9/bitslice.9 ./man9/biquad.9 ./man9/bin2gray.9 ./man9/axistest.9 ./man9/axis.9 ./man9/at_pid.9 ./man9/anglejog.9 ./man9/and2.9 ./man9/abs_s32.9 ./man9/abs.9 ./man1/xyzbc-trt-gui.1 ./man1/xyzac-trt-gui.1 ./man1/xhc-whb04b-6.1 ./man1/xhc-hb04.1 ./man1/xhc-hb04-accels.1 ./man1/wj200_vfd.1 ./man1/vfs11_vfd.1 ./man1/vfdb_vfd.1 ./man1/update_ini.1 ./man1/touchy.1 ./man1/tooledit.1 ./man1/thermistor.1 ./man1/teach-in.1 ./man1/svd-ps_vfd.1 ./man1/stepconf.1 ./man1/simulate_probe.1 ./man1/sim_pin.1 ./man1/sim-torch.1 ./man1/shuttle.1 ./man1/sendkeys.1 ./man1/scorbot-er-3.1 ./man1/schedrmt.1 ./man1/scaragui.1 ./man1/rtapi_app.1 ./man1/rs274.1 ./man1/rotarydelta.1 ./man1/qtvcp.1 ./man1/qtplasmac-setup.1 ./man1/qtplasmac-plasmac2qt.1 ./man1/qtplasmac-materials.1 ./man1/qtplasmac-cfg2prefs.1 ./man1/pyvcp_demo.1 ./man1/pyvcp.1 ./man1/pyui.1 ./man1/pyngcgui.1 ./man1/pumagui.1 ./man1/puma560gui.1 ./man1/pncconf.1 ./man1/pmx485.1 ./man1/pmx485-test.1 ./man1/pi500_vfd.1 ./man1/panelui.1 ./man1/ngcgui.1 ./man1/mqtt-publisher.1 ./man1/moveoff_gui.1 ./man1/motion-logger.1 ./man1/monitor-xhc-hb04.1 ./man1/mitsub_vfd.1 ./man1/milltask.1 ./man1/mdro.1 ./man1/mdi.1 ./man1/mb2hal.1 ./man1/max5gui.1 ./man1/maho600gui.1 ./man1/linuxcnctop.1 ./man1/linuxcncsvr.1 ./man1/linuxcncrsh.1 ./man1/linuxcncmkdesktop.1 ./man1/linuxcnclcd.1 ./man1/linuxcnc_var.1 ./man1/linuxcnc_module_helper.1 ./man1/linuxcnc_info.1 ./man1/linuxcnc.1 ./man1/lineardelta.1 ./man1/latency-test.1 ./man1/latency-plot.1 ./man1/latency-histogram.1 ./man1/iov2.1 ./man1/iocontrol.1 ./man1/io.1 ./man1/inivar.1 ./man1/image-to-gcode.1 ./man1/hy_vfd.1 ./man1/hy_gt_vfd.1 ./man1/hexagui.1 ./man1/hbmgui.1 ./man1/halui.1 ./man1/haltcl.1 ./man1/halstreamer.1 ./man1/halshow.1 ./man1/halscope.1 ./man1/halsampler.1 ./man1/halrun.1 ./man1/halrmt.1 ./man1/halreport.1 ./man1/halmeter.1 ./man1/halcompile.1 ./man1/halcmd_twopass.1 ./man1/halcmd.1 ./man1/hal_manualtoolchange.1 ./man1/hal_input.1 ./man1/hal-histogram.1 ./man1/gscreen.1 ./man1/gs2_vfd.1 ./man1/gremlin_view.1 ./man1/gmoccapy.1 ./man1/gladevcp_demo.1 ./man1/gladevcp.1 ./man1/emccalib.1 ./man1/elbpcom.1 ./man1/debuglevel.1 ./man1/axis.1 ./man1/axis-remote.1 ./man1/5axisgui.1 + popd ~/RPM/BUILD/linuxcnc-2.9.1 + rm /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnc.a + /usr/lib/rpm/find-lang linuxcnc gmoccapy --output=linuxcnc.lang + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/linuxcnc-buildroot (auto) mode of './usr/bin/rtapi_app' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) mode of './usr/bin/linuxcnc_module_helper' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) Verifying and fixing files in /usr/src/tmp/linuxcnc-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) Checking contents of files in /usr/src/tmp/linuxcnc-buildroot/ (default) Compressing files in /usr/src/tmp/linuxcnc-buildroot (auto) removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' Adjusting library links in /usr/src/tmp/linuxcnc-buildroot ./lib: (from :0) ./usr/lib: (from :0) liblinuxcncini.so.0 -> liblinuxcncini.so.0 libposemath.so.0 -> libposemath.so.0 libnml.so.0 -> libnml.so.0 liblinuxcnchal.so.0 -> liblinuxcnchal.so.0 librs274.so.0 -> librs274.so.0 libpyplugin.so.0 -> libpyplugin.so.0 libtooldata.so.0 -> libtooldata.so.0 ./usr/lib/python3/site-packages/qtvcp/lib: (from :0) Verifying ELF objects in /usr/src/tmp/linuxcnc-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=relaxed) verify-elf: WARNING: ./usr/bin/motion-logger: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/rs274: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/milltask: uses non-LFS functions: fopen freopen stat verify-elf: WARNING: ./usr/bin/linuxcnclcd: uses non-LFS functions: fcntl lstat readdir verify-elf: WARNING: ./usr/bin/hy_vfd: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/vfdb_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halscope: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halrmt: uses non-LFS functions: fcntl fopen stat verify-elf: WARNING: ./usr/bin/halcmd: uses non-LFS functions: fcntl fopen readdir verify-elf: WARNING: ./usr/bin/classicladder: uses non-LFS functions: fcntl fopen open readdir verify-elf: WARNING: ./usr/bin/vfs11_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/sendkeys: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/xhc-hb04: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/shuttle: uses non-LFS functions: glob open verify-elf: WARNING: ./usr/bin/mb2hal: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halsampler: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/halstreamer: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/rtapi_app: uses non-LFS functions: __open_2 fopen mmap open setrlimit stat verify-elf: WARNING: ./usr/bin/linuxcnc_module_helper: uses non-LFS functions: readdir verify-elf: WARNING: ./usr/lib/libtooldata.so.0: uses non-LFS functions: fopen lseek mmap open verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_XOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_BOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_UOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_PROBE_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_MOTION_CONTROL_MODEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_SPEEDi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_BLOCK_DELETEb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16GET_BLOCK_DELETEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14IO_PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SPINDLE_RETRACTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_PLANEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10NURBS_FEEDiSt6vectorI13CONTROL_POINTSaIS0_EEj verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21GET_EXTERNAL_TC_FAULTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10UPDATE_TAG8StateTag verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15RELOAD_TOOLDATAv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23CLEAR_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10CLAMP_AXIS10CANON_AXIS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11LOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_PARAMETER_FILE_NAMEPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z4WAITiiid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_VOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12START_CHANGEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_COFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_TRAVERSE_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25SET_OPTIONAL_PROGRAM_STOPb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17GET_EXTERNAL_MISTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24SPINDLE_RETRACT_TRAVERSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z3LOGPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_ANALOG_INPUTid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z27GET_EXTERNAL_OFFSET_APPLIEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_FEED_HOLD_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PARAMETER_FILE_NAMEPci verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_OFFSETSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22SET_NAIVECAM_TOLERANCEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_LENGTH_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9RIGID_TAPidddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31STOP_CUTTER_RADIUS_COMPENSATIONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8LOGCLOSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_MODEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_FEED_OVERRIDE_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20CLEAR_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_AXIS_MASKv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13UNLOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G5X_OFFSETiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z6FINISHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_FEED_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_FLOODv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ON_RESETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_TRAVERSE_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G92_OFFSETddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31GET_EXTERNAL_SELECTED_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_DIGITAL_INPUTii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_SPINDLE_MODEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SET_XY_ROTATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7LOGOPENPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_ANGLE_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z46GET_EXTERNAL_MOTION_CONTROL_NAIVECAM_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_SPINDLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z36GET_EXTERNAL_SPINDLE_OVERRIDE_ENABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32START_CUTTER_RADIUS_COMPENSATIONi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_YOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30SET_CUTTER_RADIUS_COMPENSATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_WOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9LOGAPPENDPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17DISABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: USER_DEFINED_FUNCTION verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _task verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_AUX_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_AOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_QUEUE_EMPTYv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PROBE_TRIPPED_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: builtin_modules verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18CHANGE_TOOL_NUMBERi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_TOOL_TABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22USE_TOOL_LENGTH_OFFSET7EmcPose verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_ZOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21SET_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16ENABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_TOOL_TABLE_ENTRYii7EmcPosedddi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z37GET_EXTERNAL_MOTION_CONTROL_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_ADAPTIVE_FEED_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20USE_NO_SPINDLE_FORCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CANON_ERRORPKcz verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z28WAIT_SPINDLE_ORIENT_COMPLETEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TC_REASONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_LENGTH_UNIT_TYPEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/liblinuxcnchal.so.0: uses non-LFS functions: fopen stat verify-elf: WARNING: ./usr/lib/libnml.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/liblinuxcncini.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXDestroyContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryServerString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDeleteLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDrawBuffer verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryExtension verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXMakeCurrent verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glFlush verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGetString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXCreateContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXUseXFont verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGenLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXChooseVisual verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXGetConfig verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glViewport verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXSwapBuffers verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/linuxcnc.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/hal.so: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_destroy verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hm2_get_sserial verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_shmem_base verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_del_funct_from_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_detach verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_writable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_write verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_maxdepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitch verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_stop_threads verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpRunCycle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_allhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetMotionType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetCycleTime verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetTermCond verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsForward verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_index_enable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetRunDir verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: write_homing_out_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_sequence verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpActiveDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotData verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetSpindleSync verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_synchronized verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_cancel_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsInverse verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitchable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecTag verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_needs_unlock_first verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_is_active verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVlimit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddCircle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetDout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpIsDone verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpPause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpCreate verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddRigidTap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpResume verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homeMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_unhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tcqFull verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_idle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAbort verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_home_joint verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: read_homing_in_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpQueueDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddLine verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_at_index_search_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homing_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpClear verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_get_pktuart verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_tram_add_bspi_frame verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_allocate_bspi_tram verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_clear_fifo verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_setup_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_write_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_set_read_function verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_free verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_alias verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: uses non-LFS functions: open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: uses non-LFS functions: fopen mmap stat verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_task_self verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: uses non-LFS functions: fopen mmap open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_next_lower verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_vsnprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_pause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_start verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_clock_set_period verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_highest verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: uses non-LFS functions: mmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print Bytecompiling python3 modules in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py Bytecompiling python3 modules with optimization in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -O compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Bytecompiling python3 modules with optimization-2 in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -OO compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py Hardlinking identical .pyc and .opt-?.pyc files './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/glnav.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/glnav.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hal.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/vismach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vismach.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-311.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-1.pyc' Processing files: linuxcnc-2.9.1-alt2.20231009 warning: File listed twice: /usr/lib/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/canterp.so warning: File listed twice: /usr/lib/linuxcnc/modules warning: File listed twice: /usr/lib/linuxcnc/modules/5axiskins.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/and2.so warning: File listed twice: /usr/lib/linuxcnc/modules/anglejog.so warning: File listed twice: /usr/lib/linuxcnc/modules/axistest.so warning: File listed twice: /usr/lib/linuxcnc/modules/bin2gray.so warning: File listed twice: /usr/lib/linuxcnc/modules/biquad.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitslice.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitwise.so warning: File listed twice: /usr/lib/linuxcnc/modules/bldc.so warning: File listed twice: /usr/lib/linuxcnc/modules/blend.so warning: File listed twice: /usr/lib/linuxcnc/modules/boss_plc.so warning: File listed twice: /usr/lib/linuxcnc/modules/carousel.so warning: File listed twice: /usr/lib/linuxcnc/modules/charge_pump.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke2.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke3.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarkeinv.so warning: File listed twice: /usr/lib/linuxcnc/modules/classicladder_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/comp.so warning: File listed twice: /usr/lib/linuxcnc/modules/constant.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexy_by_hal.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexykins.so warning: File listed twice: /usr/lib/linuxcnc/modules/counter.so warning: File listed twice: /usr/lib/linuxcnc/modules/dbounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/ddt.so warning: File listed twice: /usr/lib/linuxcnc/modules/deadzone.so warning: File listed twice: /usr/lib/linuxcnc/modules/debounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/demux.so warning: File listed twice: /usr/lib/linuxcnc/modules/differential.so warning: File listed twice: /usr/lib/linuxcnc/modules/div2.so warning: File listed twice: /usr/lib/linuxcnc/modules/edge.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder_ratio.so warning: File listed twice: /usr/lib/linuxcnc/modules/enum.so warning: File listed twice: /usr/lib/linuxcnc/modules/eoffset_per_angle.so warning: File listed twice: /usr/lib/linuxcnc/modules/estop_latch.so warning: File listed twice: /usr/lib/linuxcnc/modules/feedcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/filter_kalman.so warning: File listed twice: /usr/lib/linuxcnc/modules/flipflop.so warning: File listed twice: /usr/lib/linuxcnc/modules/gantry.so warning: File listed twice: /usr/lib/linuxcnc/modules/gearchange.so warning: File listed twice: /usr/lib/linuxcnc/modules/genhexkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/genserkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/gray2bin.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_bb_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_gm.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_lib.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_pi_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_ppmc.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_speaker.so warning: File listed twice: /usr/lib/linuxcnc/modules/histobins.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i43.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i90.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_eth.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_pci.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_rpspi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_spi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/homecomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/homemod.so warning: File listed twice: /usr/lib/linuxcnc/modules/hostmot2.so warning: File listed twice: /usr/lib/linuxcnc/modules/hypot.so warning: File listed twice: /usr/lib/linuxcnc/modules/ilowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/integ.so warning: File listed twice: /usr/lib/linuxcnc/modules/invert.so warning: File listed twice: /usr/lib/linuxcnc/modules/joyhandle.so warning: File listed twice: /usr/lib/linuxcnc/modules/knob2float.so warning: File listed twice: /usr/lib/linuxcnc/modules/latencybins.so warning: File listed twice: /usr/lib/linuxcnc/modules/lcd.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit1.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit2.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit3.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit_axis.so warning: File listed twice: /usr/lib/linuxcnc/modules/lincurve.so warning: File listed twice: /usr/lib/linuxcnc/modules/lineardeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/modules/logic.so warning: File listed twice: /usr/lib/linuxcnc/modules/lowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/lut5.so warning: File listed twice: /usr/lib/linuxcnc/modules/maj3.so warning: File listed twice: /usr/lib/linuxcnc/modules/match8.so warning: File listed twice: /usr/lib/linuxcnc/modules/matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/max31855.so warning: File listed twice: /usr/lib/linuxcnc/modules/maxkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_7i65.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_uart.so warning: File listed twice: /usr/lib/linuxcnc/modules/message.so warning: File listed twice: /usr/lib/linuxcnc/modules/millturn.so warning: File listed twice: /usr/lib/linuxcnc/modules/minmax.so warning: File listed twice: /usr/lib/linuxcnc/modules/modmath.so warning: File listed twice: /usr/lib/linuxcnc/modules/motmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/moveoff.so warning: File listed twice: /usr/lib/linuxcnc/modules/mult2.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiclick.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiswitch.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux16.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux2.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux4.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux8.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux_generic.so warning: File listed twice: /usr/lib/linuxcnc/modules/near.so warning: File listed twice: /usr/lib/linuxcnc/modules/not.so warning: File listed twice: /usr/lib/linuxcnc/modules/offset.so warning: File listed twice: /usr/lib/linuxcnc/modules/ohmic.so warning: File listed twice: /usr/lib/linuxcnc/modules/oneshot.so warning: File listed twice: /usr/lib/linuxcnc/modules/or2.so warning: File listed twice: /usr/lib/linuxcnc/modules/orient.so warning: File listed twice: /usr/lib/linuxcnc/modules/pentakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pid.so warning: File listed twice: /usr/lib/linuxcnc/modules/plasmac.so warning: File listed twice: /usr/lib/linuxcnc/modules/pumakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pwmgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/rosekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotarydeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotatekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/sample_hold.so warning: File listed twice: /usr/lib/linuxcnc/modules/sampler.so warning: File listed twice: /usr/lib/linuxcnc/modules/scale.so warning: File listed twice: /usr/lib/linuxcnc/modules/scaled_s32_sums.so warning: File listed twice: /usr/lib/linuxcnc/modules/scarakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/scope_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/scorbot-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/select8.so warning: File listed twice: /usr/lib/linuxcnc/modules/serport.so warning: File listed twice: /usr/lib/linuxcnc/modules/setsserial.so warning: File listed twice: /usr/lib/linuxcnc/modules/siggen.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_axis_hardware.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_home_switch.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/simple_tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/sphereprobe.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle_monitor.so warning: File listed twice: /usr/lib/linuxcnc/modules/stepgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/steptest.so warning: File listed twice: /usr/lib/linuxcnc/modules/streamer.so warning: File listed twice: /usr/lib/linuxcnc/modules/sum2.so warning: File listed twice: /usr/lib/linuxcnc/modules/supply.so warning: File listed twice: /usr/lib/linuxcnc/modules/thc.so warning: File listed twice: /usr/lib/linuxcnc/modules/thcud.so warning: File listed twice: /usr/lib/linuxcnc/modules/threads.so warning: File listed twice: /usr/lib/linuxcnc/modules/threadtest.so warning: File listed twice: /usr/lib/linuxcnc/modules/time.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelay.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelta.so warning: File listed twice: /usr/lib/linuxcnc/modules/tof.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle2nist.so warning: File listed twice: /usr/lib/linuxcnc/modules/ton.so warning: File listed twice: /usr/lib/linuxcnc/modules/tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/tpmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/tripodkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/trivkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/updown.so warning: File listed twice: /usr/lib/linuxcnc/modules/userkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/watchdog.so warning: File listed twice: /usr/lib/linuxcnc/modules/wcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/weighted_sum.so warning: File listed twice: /usr/lib/linuxcnc/modules/xhc_hb04_util.so warning: File listed twice: /usr/lib/linuxcnc/modules/xor2.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/realtime Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.qjDOal find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py provides python3(involute)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py provides python3(holecircle)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py provides python3(flowsnake)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py provides python3(filtertest)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py provides python3(screens.x1mill.x1mill_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py provides python3(screens.woodpecker.woodpecker_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py provides python3(screens.tester.tester_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py provides python3(screens.qttouchy.qttouchy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py provides python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py provides python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py provides python3(screens.qtplasmac.qtplasmac_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py provides python3(screens.qtplasmac.languages.qtplasmac)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py provides python3(screens.qtlathe.qtlathe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py provides python3(screens.qtdragon_hd.qtdragon_hd_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py provides python3(screens.qtdragon.qtdragon_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py provides python3(screens.qtaxis.qtaxis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py provides python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py provides python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py provides python3(screens.qt_cnc.qt_cnc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py provides python3(screens.blender.blender_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py provides python3(panels.vismach_scara.vismach_scara_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py provides python3(panels.vismach_router_atc.vismach_router_atc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py provides python3(panels.vismach_millturn.vismach_millturn_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py provides python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py provides python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py provides python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py provides python3(panels.versaprobe.versaprobe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py provides python3(panels.tool_dialog.tool_dialog_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py provides python3(panels.test_probe.test_probe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py provides python3(panels.test_panel.test_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py provides python3(panels.test_led.test_led_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py provides python3(panels.test_dial.test_dial_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py provides python3(panels.test_button.test_button_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py provides python3(panels.spindle_belts.spindle_belts_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py provides python3(panels.sim_panel.sim_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py provides python3(panels.qtplasmac_sim.qtplasmac_sim_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py provides python3(panels.copy.copy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py provides python3(panels.cam_align.cam_align_handler)(under non-std path /usr/share/qtvcp) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.1E87g6 find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gcode.so: underlinked libraries: /usr/lib/libpython3.11.so.1.0 lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/linuxcnc.so: underlinked libraries: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0 python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "atexit" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "errno" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "_thread" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "gcode" lines:[59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.OpenGLTk" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.interpret" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hershey" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "propertywindow" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.options" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "nf" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "bwidget" lines:[69] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "linuxcnc" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "glnav" lines:[72] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hal" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "subprocess" lines:[[1113], [[3960]], [4032]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "webbrowser" lines:[[[2086]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "vcpparse" lines:[[[3924]], [[[4047]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "_thread" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "linuxcnc" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "time" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "rs274.options" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: skipping "sys" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "hal" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.makepins" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.gladebuilder" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.core" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal_glib" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "sys" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "atexit" lines:[42] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "linuxcnc" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "time" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "qtvcp" lines:[[5723]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.makepins" lines:[[5745]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.combi_dro" lines:[[5746]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gmoccapy" lines:[[5747, 5748, 5749, 5750, 5751, 5752], [[5754]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gremlin_view: "gremlin_view" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "qtvcp" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal" lines:[92] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "errno" lines:[93] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gladevcp.makepins" lines:[94] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "atexit" lines:[96] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "time" lines:[97, 98] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal_glib" lines:[99] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "linuxcnc" lines:[197] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gscreen" lines:[198, 199, 200, 201] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gi.repository" lines:[[119], [131], [141]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "distro" lines:[[[165]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "inspect" lines:[[[889]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "collections" lines:[[[890]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "subprocess" lines:[[[3941]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "linux_event" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "hal" lines:[22, 28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "nf" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "rs274.options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "sys" lines:[22, 402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "time" lines:[402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "hal" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: skipping "sys" lines:[12] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.author" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.options" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "PIL" lines:[[29], [[502]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "Image" lines:[[[31]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter" lines:[[499], [[757]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "pickle" lines:[[506]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "nf" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "ImageTk" lines:[[[[504]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter.filedialog" lines:[[[758]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "vismach" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "lineardeltakins" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "linuxcnc" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "rs274.options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "tkinter" lines:[[122]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "_tkinter" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "vismach" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "hal" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "getopt" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "sys" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/modcompile: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "time" lines:[31] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "hal" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "linuxcnc" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "paho.mqtt.client" lines:[[[[53]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "optparse" lines:[[[118]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "time" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial.tools.list_ports" lines:[[32]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "errno" lines:[38] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "copy" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "multifilebuilder" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "touchy" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "pncconf" lines:[54, 55, 56, 57, 58, 59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "hal" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "vismach" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "hal" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyngcgui: "pyngcgui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyui: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: skipping "sys" lines:[37] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "vcpparse" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "hal" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: "json" lines:[[[[[[336]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "tkinter" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtCore" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtGui" lines:[[39]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtWidgets" lines:[[40]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebEngineWidgets" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebKitWidgets" lines:[[[[18]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp" lines:[[[117]], [523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "linuxcnc" lines:[[[[152]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.lib" lines:[[[[[329]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.core" lines:[[[450]], [543]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "rotarydeltakins" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: skipping "sys" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "vismach" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: "hal" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "hal" lines:[35, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "errno" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "time" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "multifilebuilder" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "stepconf" lines:[116, 117, 118] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "defusedexpat" lines:[[47]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "xml.parsers" lines:[[[49]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "sys" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "atexit" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "time" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "linuxcnc" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "touchy" lines:[62, 63, 64, 65, 66, 67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "subprocess" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "datetime" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "vismach" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "hal" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "linuxcnc" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "scipy.interpolate" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py: "sys" lines:[[112]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py: skipping "sys" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "gladevcp.hal_pythonplugin" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "importlib" lines:[[4]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "linuxcnc" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "hal_glib" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "gladevcp.gtk_action" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "linuxcnc" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "qtvcp" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "hal" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "gladevcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "sys" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "time" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "atexit" lines:[829] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "subprocess" lines:[[[601], [617]], [[838]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp.core" lines:[[915]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.core" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "gladevcp.hal_widgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "gladevcp.hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "atexit" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_actions" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "subprocess" lines:[[[37]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "hal_widgets" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "linuxcnc" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gremlin" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "rs274.glcanon" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gcode" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_glib" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_actions" lines:[[41]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gladevcp.hal_actions" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "subprocess" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gremlin_view" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gladevcp" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "hal_widgets" lines:[[46]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "gladevcp.hal_widgets" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_glib" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.core" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_actions" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_actions" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "gladevcp.hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "pyngcgui" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "gladevcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_widgets" lines:[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.status_label" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.state_label" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.led" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.calculatorwidget" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.tooledit_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.drowidget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.iconview" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.combi_dro" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetwidget" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetpage_widget" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_bar" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_meter" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_graph" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_lightbutton" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.overridewidget" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.jogwheel" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.speedcontrol" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_dial" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_actions" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_filechooser" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_sourceview" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_mdihistory" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.macro_widget" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_pyngcgui" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin_plus" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "linuxcnc" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "hal_glib" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_widgets" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_actions" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_filechooser" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "os" lines:[[299]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "tempfile" lines:[[299]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py: "hal" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py: "qtvcp" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "gladevcp.hal_widgets" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "hal_widgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "gladevcp.hal_widgets" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_actions" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_actions" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.gladebuilder" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.hal_widgets" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.led" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "hal_glib" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.gladebuilder" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_widgets" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_actions" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "gladevcp.hal_widgets" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_widgets" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "gladevcp.hal_widgets" lines:[[26]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_widgets" lines:[[23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "gladevcp.hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib" lines:[[16], [73]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.xobject" lines:[[17], [74]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.protocol" lines:[[72]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py: "gladevcp.makepins" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "itertools" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi" lines:[[9]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi.repository" lines:[[12, 13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "cairo" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py: "gladevcp" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "qtvcp" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "gmoccapy" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "icon_theme_helper" lines:[[[40]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "gi.repository" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "sys" lines:[46] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "glnav" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.interpret" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "linuxcnc" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "gcode" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "time" lines:[68] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "_thread" lines:[74] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib.display" lines:[[56]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "sys" lines:[80] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "gladevcp.hal_actions" lines:[81] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "linuxcnc" lines:[82] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "time" lines:[83] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "getopt" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py: "_hal" lines:[30, 31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "_hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "sys" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "time" lines:[8] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: "configparser" lines:[[[1960]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: "linuxcnc" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: skipping "sys" lines:[57] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: skipping "sys" lines:[62] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "linuxcnc" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "hal" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp" lines:[74] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp.hal_filechooser" lines:[[212]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gi.repository.GdkPixbuf" lines:[[456]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[[[[2987]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "glib" lines:[[[[2988]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "hal" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[[[35]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "zmq" lines:[[[[[[94]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "sys" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "hal" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "bwidget" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "time" lines:[55] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "vcpparse" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.dom.minidom" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.parsers.expat" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "rs274.options" lines:[[[1745]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "_thread" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "glnav" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "rs274" lines:[31, 32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "gcode" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp.widgets.fake_status" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "PyQt5.QtOpenGL" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "OpenGL" lines:[[22, 23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_pstat" lines:[286] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_action" lines:[300] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_tstat" lines:[316] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp.core" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi" lines:[[31], [279]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi.repository" lines:[[33], [280]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "espeak" lines:[[54]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "queue" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "distro" lines:[[[[98]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: skipping "time" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/colored_formatter.py: "logging" lines:[[116]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "atexit" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "linuxcnc" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "atexit" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "linuxcnc" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "atexit" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.qt_makegui" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.lib" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp.core" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "hal" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "sys" lines:[[189]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "PyQt5.QtCore" lines:[[190]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.lib" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "gladevcp.hal_filechooser" lines:[[879]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "popplerqt5" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/mill_xyz.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: skipping "itertools" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi.repository" lines:[[13, 14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "cairo" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: "qtvcp.lib.qt_vismach.primitives" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: skipping "plasmac" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.lib.qtplasmac" lines:[29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py: "cv2" lines:[[[270]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: skipping "sys" lines:[97] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter" lines:[[101]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.filedialog" lines:[[102]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.messagebox" lines:[[103]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "Tkinter" lines:[[105]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFileDialog" lines:[[106]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkMessageBox" lines:[[107]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "psyco" lines:[[114]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFont" lines:[[[6408]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.font" lines:[[[[6411]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "dbus.mainloop.pyqt5" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "sys" lines:[[255]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "PyQt5.QtCore" lines:[[256]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.qt_makegui" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.lib.aux_program_loader" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "qtvcp" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "hal_glib" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py: skipping "time" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.lib.writer.ext" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib" lines:[[[26]], [51]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.xobject" lines:[[[27]], [52]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.protocol" lines:[[50]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "qtvcp.lib.colored_formatter" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button_round" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.richtext_selector" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.basic_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.camview_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.container_widgets" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.detach_tabs" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.gcode_graphics" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.hal_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.jog_increments" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.joypad" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.led_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.nurbs_editor" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.overlay_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.simplewidgets_plugin" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.led_plugin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.hal_label_plugin" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.detach_tabs_plugin" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_progress_bar_plugin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.joypad_plugin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.nurbs_editor_plugin" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.web_widget_plugin" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.container_plugin" lines:[37, 38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.graphics_plugin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.widgets_plugin" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_led_plugin" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_label_plugin" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_label_plugin" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.actionbutton_plugin" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.dialog_plugin" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.overlay_plugin" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_slider_plugin" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_adjustment_bar_plugin" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.screenoptions_plugin" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.jogincrements_plugin" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.camview_plugin" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.toolbutton_plugin" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.versa_probe_plugin" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.basic_probe_plugin" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.tab_widget_plugin" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.virtualkeyboard_plugin" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_gauge_plugin" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.bar_plugin" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.round_gauge" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.round_progress" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.screen_options" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.simple_widgets" lines:[5, 6, 7, 8, 9, 10, 11, 12, 13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_output" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_input" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.xembed" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.radio_axis_selector" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.axis_tool_button" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.offset_tool_button" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.file_manager" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.image_switcher" lines:[21, 22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.machine_log" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.state_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.state_led" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.adjustment_bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.richtext_selector" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.status_label" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.status_slider" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.tab_widget" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.system_tool_button" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.action_tool_button" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.versa_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.virtualkeyboard" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.web_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.dro_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_line" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_history" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_touchy" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.gcode_editor" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.geditor" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.status_stacked" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.widget_switcher" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.origin_offsetview" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.tool_offsetview" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.macro_widget" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "linuxcnc" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "sys" lines:[1057] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "atexit" lines:[1058] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "subprocess" lines:[[[650], [666]], [[1067]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[[1147]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "importlib" lines:[[[[[190]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "resources" lines:[[[[[[191]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.screen_options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "qtvcp" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.simple_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.lib.aux_program_loader" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "sys" lines:[[1580]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "PyQt5.QtWidgets" lines:[[1581]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "qtvcp.widgets.action_button" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "sys" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "PyQt5.QtWidgets" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "sys" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "PyQt5.QtWidgets" lines:[[83]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.lib.aux_program_loader" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "sys" lines:[[390]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "PyQt5.QtWidgets" lines:[[391]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "hal" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "sys" lines:[[292]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "PyQt5.QtWidgets" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp.widgets.widget_baseclass" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "hal" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "PyQt5.QtCore" lines:[[7], [[10]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.dialogMixin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtWidgets" lines:[[459]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtCore" lines:[[460]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtGui" lines:[[461]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "qtvcp.core" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "sys" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: skipping "_thread" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.widgets.widget_baseclass" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.core" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "cv2" lines:[[45]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "sys" lines:[[504]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py: "sys" lines:[[359]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp.widgets.widget_baseclass" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.widget_baseclass" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.origin_offsetview" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.tool_offsetview" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.macro_widget" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.versa_probe" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.entry_widget" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.virtualkeyboard" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.calculator" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.machine_log" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.lib.notify" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.dialogMixin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.camview_widget" lines:[[[984]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "sys" lines:[[1925]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "PyQt5.QtWidgets" lines:[[1926]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "sys" lines:[[326]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "PyQt5.QtWidgets" lines:[[327]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "sys" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "PyQt5.QtWidgets" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.widgets.widget_baseclass" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "sys" lines:[[556]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.widgets.widget_baseclass" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.core" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.Qsci" lines:[[58]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtWidgets" lines:[[1137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtCore" lines:[[1138]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtGui" lines:[[1139]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qt5_graphics" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.widgets.widget_baseclass" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.core" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "sys" lines:[[511]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "PyQt5.QtWidgets" lines:[[512]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.gcode_editor" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.widget_baseclass" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtWidgets" lines:[[523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtCore" lines:[[524]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtGui" lines:[[525]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.widget_baseclass" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "sys" lines:[[216]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "PyQt5.QtWidgets" lines:[[217]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "sys" lines:[[375]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "PyQt5.QtWidgets" lines:[[376]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "sys" lines:[[195]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "qtvcp.widgets.widget_baseclass" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtCore" lines:[[22], [[25]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "sys" lines:[[655]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtWidgets" lines:[[656]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "sys" lines:[[242]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "PyQt5.QtWidgets" lines:[[243]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "sys" lines:[[133]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "PyQt5.QtWidgets" lines:[[134]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.entry_widget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.touchEntry" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "PyQt5" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "sys" lines:[[664]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.mdi_line" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtWidgets" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtCore" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtGui" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "sys" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: skipping "time" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.widgets.entry_widget" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.lib.aux_program_loader" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "sys" lines:[[330]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "PyQt5.QtWidgets" lines:[[331]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtWidgets" lines:[[393]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtCore" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtGui" lines:[[395]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "sys" lines:[[396]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: skipping "sys" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "gcode" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qt5_graphics" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp.core" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "sys" lines:[[202]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "PyQt5.QtWidgets" lines:[[203]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "PyQt5.QtWidgets" lines:[[516]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "sys" lines:[[387]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtWidgets" lines:[[388]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtCore" lines:[[389]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "time" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.widgets.probe_routines" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.widgets.widget_baseclass" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "sys" lines:[[64]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "PyQt5.QtWidgets" lines:[[65]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: skipping "sys" lines:[10] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "sys" lines:[[318]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "PyQt5.QtWidgets" lines:[[319]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "sys" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "PyQt5.QtWidgets" lines:[[294]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtWidgets" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtCore" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtGui" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "linuxcnc" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.xembed" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.message" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.notify" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.audio_player" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.preferences" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.machine_log" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "zmq" lines:[[[61]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "json" lines:[[[67]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[[[[[403]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.dialog_widget" lines:[[[511], [526], [536], [544], [552], [561], [580], [588], [597], [605], [613], [621], [630], [638], [646]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.overlay_widget" lines:[[[569]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.lib.aux_program_loader" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.core" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.simple_widgets" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "sys" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.widgets.led_widget" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "sys" lines:[[558]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "PyQt5.QtGui" lines:[[559]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.simple_widgets" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtWidgets" lines:[[785]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtCore" lines:[[786]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtGui" lines:[[787]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "sys" lines:[[789]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.core" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.qt_makegui" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.dialog_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "sys" lines:[[123]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "PyQt5.QtWidgets" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "PyQt5.QtWidgets" lines:[[587]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtWidgets" lines:[[268]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtCore" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtGui" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "sys" lines:[[271]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.widget_baseclass" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.dialogMixin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtWidgets" lines:[[593]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtCore" lines:[[594]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtGui" lines:[[595]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtWidgets" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtCore" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtGui" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebEngineWidgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebKitWidgets" lines:[[[[17]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.widgets.widget_baseclass" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.lib" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "PyQt5.QtWidgets" lines:[[137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "_togl" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "glnav" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "tkinter.dialog" lines:[[[209]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py: "rs274.interpret" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "rs274" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "itertools" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "glnav" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "hershey" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "gcode" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py: "gcode" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: "nf" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: skipping "sys" lines:[167] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: "configparser" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: skipping "sys" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: "stepconf" lines:[[[[221]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py: skipping "__main__" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py: "hal" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "pyvcp_widgets" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "rs274.OpenGLTk" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "hal" lines:[18, 25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "glnav" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "tkinter" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "pickle" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "nf" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "rs274.options" lines:[[13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "os" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py: "stdglue" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py: "remap" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: "qtvcp.widgets.file_manager" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "hal" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.core" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.lib.preferences" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.simple_widgets" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.simple_widgets" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.led_widget" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.widgets.dialog_widget" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.dialog_widget" lines:[11, 12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.nurbs_editor" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.toolbar_actions" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.core" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.keybindings" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.aux_program_loader" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.notify" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.dialog_widget" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.preferences" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.overlay_widget" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.tool_offsetview" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.dialog_widget" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.notify" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.geditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.status_label" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.state_led" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.bar" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.writer" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.keybindings" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcodes" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[13] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[279]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[290]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[284]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[441]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[446]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.auto_height.auto_height" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.writer" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcodes" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.aux_program_loader" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[438]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[443]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[454]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[458]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[463]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.gcode_editor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.file_manager" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.gcodes" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.action_button" lines:[5666] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.axis_tool_button" lines:[5667] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.camview_widget" lines:[5668] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.dro_widget" lines:[5669] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.file_manager" lines:[5670] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_editor" lines:[5671] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_graphics" lines:[5672] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.hal_label" lines:[5673] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.jog_increments" lines:[5674] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.led_widget" lines:[5675] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.machine_log" lines:[5676] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.mdi_history" lines:[5677] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.screen_options" lines:[5678] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.simple_widgets" lines:[5679] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_label" lines:[5680] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_slider" lines:[5681] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.system_tool_button" lines:[5682] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "hal" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.gcode_editor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.mdi_line" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.tool_offsetview" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.file_manager" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.writer" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcodes" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.simple_widgets" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[229]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[233]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[[[239]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[422]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[427]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.toolbar_actions" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py is not executable /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: `source [file join $::env(HALLIB_DIR) hal_procs_lib.tcl]' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: ` } else {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage is ${LINUXCNC_EMCSH-wish} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: invalid command: ${LINUXCNC_EMCSH-wish} /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: `if ([info exists env(LANG)]) {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl is ${LINUXCNC_EMCSH-emcsh} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: invalid command: ${LINUXCNC_EMCSH-emcsh} shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: /usr/scripts/rip-environment -> /usr/scripts/rip-environment (raw, not installed) shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: invalid command: -v ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' --- find-requires-deps 2023-11-11 07:27:41.184782898 +0000 +++ filter-requires-deps 2023-11-11 07:27:41.186782886 +0000 @@ -24,3 +24,3 @@ /usr/lib/python3/site-packages -/usr/scripts/rip-environment + coreutils @@ -182,3 +182,3 @@ tk -typelib(Cairo) + typelib(GLib) find-requires: FINDPACKAGE-COMMANDS: awk basename cat clear cp cut date dirname gcc git grep head ipcrm ln lsb_release mkdir mktemp ps pylupdate5 python3 readlink rm sleep sudo tclsh touch tty uname uptime wc wish xdpyinfo Provides: python3(_hal), python3(_togl), python3(bitfile), python3(bwidget), python3(filtertest) = set:edp3, python3(flowsnake) = set:edp3, python3(gcode), python3(gladevcp), python3(gladevcp.calculatorwidget), python3(gladevcp.combi_dro), python3(gladevcp.core), python3(gladevcp.drowidget), python3(gladevcp.gladebuilder), python3(gladevcp.gtk_action), python3(gladevcp.hal_actions), python3(gladevcp.hal_bar), python3(gladevcp.hal_dial), python3(gladevcp.hal_filechooser), python3(gladevcp.hal_graph), python3(gladevcp.hal_gremlin), python3(gladevcp.hal_gremlin_plus), python3(gladevcp.hal_lightbutton), python3(gladevcp.hal_mdihistory), python3(gladevcp.hal_meter), python3(gladevcp.hal_pyngcgui), python3(gladevcp.hal_pythonplugin), python3(gladevcp.hal_sourceview), python3(gladevcp.hal_widgets), python3(gladevcp.iconview), python3(gladevcp.jogwheel), python3(gladevcp.led), python3(gladevcp.macro_widget), python3(gladevcp.makepins), python3(gladevcp.offsetpage_widget), python3(gladevcp.offsetwidget), python3(gladevcp.overridewidget), python3(gladevcp.persistence), python3(gladevcp.speedcontrol), python3(gladevcp.state_label), python3(gladevcp.status_label), python3(gladevcp.tooledit_widget), python3(gladevcp.xembed), python3(gladevcp_makepins), python3(glnav), python3(gmoccapy), python3(gmoccapy.dialogs), python3(gmoccapy.getiniinfo), python3(gmoccapy.icon_theme_helper), python3(gmoccapy.notification), python3(gmoccapy.player), python3(gmoccapy.preferences), python3(gmoccapy.widgets), python3(gremlin), python3(gremlin_view), python3(gscreen), python3(gscreen.emc_interface), python3(gscreen.keybindings), python3(gscreen.mdi), python3(gscreen.preferences), python3(hal), python3(hal_glib), python3(hershey), python3(holecircle) = set:edp3, python3(involute) = set:edp3, python3(lineardeltakins), python3(linux_event), python3(linuxcnc), python3(linuxcnc_util), python3(multifilebuilder), python3(nf), python3(panels.cam_align.cam_align_handler) = set:ed3l, python3(panels.copy.copy_handler) = set:ed3l, python3(panels.qtplasmac_sim.qtplasmac_sim_handler) = set:ed3l, python3(panels.sim_panel.sim_panel_handler) = set:ed3l, python3(panels.spindle_belts.spindle_belts_handler) = set:ed3l, python3(panels.test_button.test_button_handler) = set:ed3l, python3(panels.test_dial.test_dial_handler) = set:ed3l, python3(panels.test_led.test_led_handler) = set:ed3l, python3(panels.test_panel.test_panel_handler) = set:ed3l, python3(panels.test_probe.test_probe_handler) = set:ed3l, python3(panels.tool_dialog.tool_dialog_handler) = set:ed3l, python3(panels.versaprobe.versaprobe_handler) = set:ed3l, python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler) = set:ed3l, python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler) = set:ed3l, python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler) = set:ed3l, python3(panels.vismach_millturn.vismach_millturn_handler) = set:ed3l, python3(panels.vismach_router_atc.vismach_router_atc_handler) = set:ed3l, python3(panels.vismach_scara.vismach_scara_handler) = set:ed3l, python3(plasmac.block), python3(plasmac.bolt_circle), python3(plasmac.circle), python3(plasmac.ellipse), python3(plasmac.gusset), python3(plasmac.line), python3(plasmac.polygon), python3(plasmac.rectangle), python3(plasmac.run_from_line), python3(plasmac.sector), python3(plasmac.slot), python3(plasmac.star), python3(plasmac.triangle), python3(pncconf), python3(pncconf.build_HAL), python3(pncconf.build_INI), python3(pncconf.data), python3(pncconf.pages), python3(pncconf.private_data), python3(pncconf.tests), python3(popupkeyboard), python3(propertywindow), python3(pyhal), python3(pyngcgui), python3(pyui), python3(pyui.commands), python3(pyui.master), python3(pyui.panelui_validate), python3(pyui.widgets), python3(pyvcp_widgets), python3(qt5_graphics), python3(qtvcp), python3(qtvcp.core), python3(qtvcp.lib), python3(qtvcp.lib.audio_player), python3(qtvcp.lib.auto_height.auto_height), python3(qtvcp.lib.aux_program_loader), python3(qtvcp.lib.colored_formatter), python3(qtvcp.lib.gcode_utility), python3(qtvcp.lib.gcode_utility.facing), python3(qtvcp.lib.gcode_utility.hole_circle), python3(qtvcp.lib.gcode_utility.hole_enlarge), python3(qtvcp.lib.gcodes), python3(qtvcp.lib.keybindings), python3(qtvcp.lib.machine_log), python3(qtvcp.lib.mdi_text), python3(qtvcp.lib.message), python3(qtvcp.lib.notify), python3(qtvcp.lib.preferences), python3(qtvcp.lib.qt_ngcgui.ngcgui), python3(qtvcp.lib.qt_pdf.PDFViewer), python3(qtvcp.lib.qt_vismach), python3(qtvcp.lib.qt_vismach.fanuc_200f), python3(qtvcp.lib.qt_vismach.gantry_5axis), python3(qtvcp.lib.qt_vismach.mill_xyz), python3(qtvcp.lib.qt_vismach.millturn), python3(qtvcp.lib.qt_vismach.primitives), python3(qtvcp.lib.qt_vismach.qt_vismach), python3(qtvcp.lib.qt_vismach.scara), python3(qtvcp.lib.qtplasmac), python3(qtvcp.lib.qtplasmac.conv_block), python3(qtvcp.lib.qtplasmac.conv_bolt), python3(qtvcp.lib.qtplasmac.conv_circle), python3(qtvcp.lib.qtplasmac.conv_ellipse), python3(qtvcp.lib.qtplasmac.conv_gusset), python3(qtvcp.lib.qtplasmac.conv_line), python3(qtvcp.lib.qtplasmac.conv_polygon), python3(qtvcp.lib.qtplasmac.conv_rectangle), python3(qtvcp.lib.qtplasmac.conv_sector), python3(qtvcp.lib.qtplasmac.conv_settings), python3(qtvcp.lib.qtplasmac.conv_slot), python3(qtvcp.lib.qtplasmac.conv_star), python3(qtvcp.lib.qtplasmac.conv_triangle), python3(qtvcp.lib.qtplasmac.conversational), python3(qtvcp.lib.qtplasmac.set_offsets), python3(qtvcp.lib.qtplasmac.tooltips), python3(qtvcp.lib.qtplasmac.updater), python3(qtvcp.lib.ripper.gcode_ripper), python3(qtvcp.lib.sys_notify), python3(qtvcp.lib.toolbar_actions), python3(qtvcp.lib.touchoff_subprogram), python3(qtvcp.lib.virtual_keyboard), python3(qtvcp.lib.writer), python3(qtvcp.lib.writer.ext), python3(qtvcp.lib.writer.ext.datetime), python3(qtvcp.lib.writer.ext.find), python3(qtvcp.lib.writer.ext.table), python3(qtvcp.lib.writer.ext.wordcount), python3(qtvcp.lib.writer.writer), python3(qtvcp.lib.xembed), python3(qtvcp.logger), python3(qtvcp.plugins), python3(qtvcp.plugins.actionbutton_plugin), python3(qtvcp.plugins.bar_plugin), python3(qtvcp.plugins.basic_probe_plugin), python3(qtvcp.plugins.camview_plugin), python3(qtvcp.plugins.container_plugin), python3(qtvcp.plugins.detach_tabs_plugin), python3(qtvcp.plugins.dialog_plugin), python3(qtvcp.plugins.graphics_plugin), python3(qtvcp.plugins.hal_label_plugin), python3(qtvcp.plugins.jogincrements_plugin), python3(qtvcp.plugins.joypad_plugin), python3(qtvcp.plugins.led_plugin), python3(qtvcp.plugins.nurbs_editor_plugin), python3(qtvcp.plugins.overlay_plugin), python3(qtvcp.plugins.qtvcp_plugin), python3(qtvcp.plugins.round_gauge_plugin), python3(qtvcp.plugins.round_progress_bar_plugin), python3(qtvcp.plugins.screenoptions_plugin), python3(qtvcp.plugins.simplewidgets_plugin), python3(qtvcp.plugins.state_label_plugin), python3(qtvcp.plugins.state_led_plugin), python3(qtvcp.plugins.status_adjustment_bar_plugin), python3(qtvcp.plugins.status_label_plugin), python3(qtvcp.plugins.status_slider_plugin), python3(qtvcp.plugins.tab_widget_plugin), python3(qtvcp.plugins.toolbutton_plugin), python3(qtvcp.plugins.versa_probe_plugin), python3(qtvcp.plugins.virtualkeyboard_plugin), python3(qtvcp.plugins.web_widget_plugin), python3(qtvcp.plugins.widgets_plugin), python3(qtvcp.qt_action), python3(qtvcp.qt_istat), python3(qtvcp.qt_makegui), python3(qtvcp.qt_makepins), python3(qtvcp.qt_pstat), python3(qtvcp.qt_tstat), python3(qtvcp.qtvcp_handler), python3(qtvcp.widgets), python3(qtvcp.widgets.action_button), python3(qtvcp.widgets.action_button_round), python3(qtvcp.widgets.action_tool_button), python3(qtvcp.widgets.adjustment_bar), python3(qtvcp.widgets.axis_tool_button), python3(qtvcp.widgets.bar), python3(qtvcp.widgets.basic_probe), python3(qtvcp.widgets.calculator), python3(qtvcp.widgets.camview_widget), python3(qtvcp.widgets.container_widgets), python3(qtvcp.widgets.detach_tabs), python3(qtvcp.widgets.dialogMixin), python3(qtvcp.widgets.dialog_widget), python3(qtvcp.widgets.dro_widget), python3(qtvcp.widgets.entry_widget), python3(qtvcp.widgets.fake_status), python3(qtvcp.widgets.file_manager), python3(qtvcp.widgets.gcode_editor), python3(qtvcp.widgets.gcode_graphics), python3(qtvcp.widgets.geditor), python3(qtvcp.widgets.general_hal_input), python3(qtvcp.widgets.general_hal_output), python3(qtvcp.widgets.hal_label), python3(qtvcp.widgets.hal_selectionbox), python3(qtvcp.widgets.image_switcher), python3(qtvcp.widgets.jog_increments), python3(qtvcp.widgets.joypad), python3(qtvcp.widgets.led_widget), python3(qtvcp.widgets.machine_log), python3(qtvcp.widgets.macro_widget), python3(qtvcp.widgets.mdi_history), python3(qtvcp.widgets.mdi_line), python3(qtvcp.widgets.mdi_touchy), python3(qtvcp.widgets.nurbs_editor), python3(qtvcp.widgets.offset_tool_button), python3(qtvcp.widgets.origin_offsetview), python3(qtvcp.widgets.overlay_widget), python3(qtvcp.widgets.probe_routines), python3(qtvcp.widgets.probe_subprog), python3(qtvcp.widgets.qtvcp_icons), python3(qtvcp.widgets.radio_axis_selector), python3(qtvcp.widgets.richtext_selector), python3(qtvcp.widgets.round_gauge), python3(qtvcp.widgets.round_progress), python3(qtvcp.widgets.runFromLine_dialog), python3(qtvcp.widgets.screen_options), python3(qtvcp.widgets.simple_widgets), python3(qtvcp.widgets.state_label), python3(qtvcp.widgets.state_led), python3(qtvcp.widgets.status_label), python3(qtvcp.widgets.status_slider), python3(qtvcp.widgets.status_stacked), python3(qtvcp.widgets.stylesheeteditor), python3(qtvcp.widgets.system_tool_button), python3(qtvcp.widgets.tab_widget), python3(qtvcp.widgets.tool_offsetview), python3(qtvcp.widgets.touchEntry), python3(qtvcp.widgets.versa_probe), python3(qtvcp.widgets.virtualkeyboard), python3(qtvcp.widgets.web_widget), python3(qtvcp.widgets.widget_baseclass), python3(qtvcp.widgets.widget_switcher), python3(qtvcp.widgets.xembed), python3(rotarydeltakins), python3(rs274), python3(rs274.OpenGLTk), python3(rs274.author), python3(rs274.glcanon), python3(rs274.interpret), python3(rs274.options), python3(screens.blender.blender_handler) = set:ed3l, python3(screens.qt_cnc.qt_cnc_handler) = set:ed3l, python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler) = set:ed3l, python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler) = set:ed3l, python3(screens.qtaxis.qtaxis_handler) = set:ed3l, python3(screens.qtdragon.qtdragon_handler) = set:ed3l, python3(screens.qtdragon_hd.qtdragon_hd_handler) = set:ed3l, python3(screens.qtlathe.qtlathe_handler) = set:ed3l, python3(screens.qtplasmac.languages.qtplasmac) = set:ed3l, python3(screens.qtplasmac.qtplasmac_handler) = set:ed3l, python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler) = set:ed3l, python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler) = set:ed3l, python3(screens.qttouchy.qttouchy_handler) = set:ed3l, python3(screens.tester.tester_handler) = set:ed3l, python3(screens.woodpecker.woodpecker_handler) = set:ed3l, python3(screens.x1mill.x1mill_handler) = set:ed3l, python3(stepconf), python3(stepconf.build_HAL), python3(stepconf.build_INI), python3(stepconf.import_mach), python3(stepconf.pages), python3(tooldb), python3(touchy), python3(touchy.emc_interface), python3(touchy.filechooser), python3(touchy.hal_interface), python3(touchy.listing), python3(touchy.mdi), python3(touchy.preferences), python3(vcpparse), python3(vismach), tcl(Hal), tcl(Hal)-1 = 1.0, tcl(Linuxcnc), tcl(Linuxcnc)-1 = 1.0, tcl(Ngcgui), tcl(Ngcgui)-1 = 1.0, tcl(Ngcguittt), tcl(Ngcguittt)-1 = 1.0 Requires: liblinuxcnc = 2.9.1-alt2.20231009, python3-module-PyQt5-devel, libgtksourceview3-gir, libX11-devel, tclx, tcl-blt, python3(Xlib) < 0, python3(PyQt5.Qsci) < 0, /bin/bash, /bin/sh, /lib/ld-linux.so.2, /lib/udev/rules.d, /usr/bin/env, /usr/bin/python3, /usr/bin/python3.11, /usr/bin/tclsh, /usr/bin/tclsh8.6, /usr/bin/wish, /usr/bin/wish8.6, /usr/lib/python3/site-packages, coreutils, gawk, gcc-common, git-core, grep, libX11.so.6 >= set:oja5r3qabUpLHlTcdkK7Ymnta6aWUK6qURI2aereyuySbaY9Y9rRf80, libXinerama.so.1 >= set:hfyH4K6, libXmu.so.6 >= set:lktel, libboost_python311.so.1.83.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.2.3), libc.so.6(GLIBC_2.27), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.7), libc.so.6(GLIBC_2.8), libcairo.so.2 >= set:miBeiC9UuDqAUQ1bepgkhH08f6m87ljhFbj6, libepoxy.so.0 >= set:plG6OtaOh21hPpoEbYgihHZ0wsB7PrHp7He0, libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgdk-3.so.0 >= set:nkZ5ndiwLew01gu7UA, libgdk-x11-2.0.so.0 >= set:njH9A3kDQ0iQRBflIP1zlE5TpwDZsPmjGbQ, libglib-2.0.so.0 >= set:olyg8bKheHPr7MU1, libgobject-2.0.so.0 >= set:mjQCdZlc930HMK1, libgtk-3.so.0 >= set:qjjZoCF3lFXh6tMGe5LNfHjmYeZBthRtN41TeIZzjgwWOrHiSh2NZBTl9RaGCZcaZtsSDoklAfoY3jZqdwNTjVxluts4fzptNZoObnMXHUBHYRt39LkeFCpeX0XGSNmA8AjwtwC5hgzieP0K2oI8aJb3kDhZ4iVp7IxwWvgRbyDTqaJhAOTD2Fv8g9yPZ6NOuGRIGtqP9FiPwZfRTshMUVUTNtViaQgX5ndOGrJMiFzxXDm6AW3HZBRN91ZxbqL4uj5Pt3embDjf1R8JsH7xQTCBVCxMfYTOJIZFI9ZbiGb6GLX0FyKvWxZH06khJ56lr41PV7VxkpV7CX5AN30dAgkjASU69WAU20ZKQEW5CdLKnYV6PQaWR9Q2d4, libgtk-x11-2.0.so.0 >= set:pijZofB1Sac1HWm6UJI4cT7ZgTZ5cu7LyBFNQFMTkKvPsM6syJWtgE6gCt8VZC2002Yr6O3qpMKORxMYFpGbygZwTFmPjEBmkFK5tZ9puR8V4nvNqcMb9Q8ET5Z5nwuEj7uZbKfI69aHIIc6AKSdSXr1KNVy75UzoI60weGwIZrr62BMCZ1BOfXpj2M6ZjtlXi25ghyZccTXY7GXsFuvoeSJ3yKQFbX9A7iCzUEYa6aZ04fAonLTJJ2yQZ7HcxVrWamaKGUdBx8Y99PalB5dPYDzTFF762xI20, liblinuxcnchal.so.0 >= set:kdPx99okMC0Dz1625MawlIfquO3JZ3ZIUi5Jl7M43uZ4jrJfiRqxZ2hezaWOwqo8jNxXb4PXA5GbMGAP8gNN7e5Z7F9EPZhr3lvZ8aQw6VY2Cu2agoAmBmnw7UQIPmWiMLuqjUJnhudWalGzhjgU7, liblinuxcncini.so.0 >= set:jf3pACnRkFYa1jK9dmLdZcAMQZdkP4S54W3, libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libmodbus.so.5 >= set:kf4sxmJBcjkoYXJ6nZ8w1f3UAmWo529bNQO9HdZ6GfYWQgMVJKZenaurI1UX4, libnml.so.0 >= set:nhHZFI3kBS0Ma7l8Tbc7NDAj0cVe7YpJAecK8HiAlVmUFIacmYZAgNKb7AgZ9o3YcwI77x8lKghWwBp3R3aHXufreVgSJOcHDIMmg3FTiWGgZDSqajrVXGCmzmwK9kEnrrZAXgB, libpango-1.0.so.0 >= set:miqUTrpg55DU675j31iPjU59gVL2, libpangocairo-1.0.so.0 >= set:jiZ1Z0, libposemath.so.0 >= set:mhNqbLmit1h1SKAkf3R8yKzITkH51qlNb2mXMvLIbzYdLSZ1Pn3dvFo360T4Ym3VUZ06J9T65VCYVK5, libpyplugin.so.0 >= set:ifB9gZhMHZs51, libpython3.11.so.1.0 >= set:oipCiruqzTeZzb6nQEDgYmcycRwVJdbZ5iXKYZiJODaguD1Z09heVWM4C62R9XS3UbkznKwtFB0v3EX8wxJskhoMjZnQOps91h0gXMB2zZ0ZiESnuTSI6RauE3xO1AePZyWlNaBQhCb27NyC2QiQiNF0zEU1FA9BQnlAid, libreadline.so.8 >= set:njCJKlFcmgU8mvL3SqZmyq3ZFmIppb, librs274.so.0 >= set:oklu8nstiJF4gERvmYKLZu2B25LRi2g8GwakLmkAhIVMce, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.14), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.20), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtk8.6.so >= set:mh48jtZxaNUhMsSfBJ4AXC6RIwDmyqFM8nd9l1ee9PQ0ud0, libtooldata.so.0 >= set:ieCH2SkPFzG4BeSHWNfZwfGC1oYUwSluc7, libudev.so.1 >= set:kgKhqJ5KQ3IrBeCbBEkBBomRh1RpLFAx211, libudev.so.1(LIBUDEV_183), libusb-1.0.so.0 >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu, lsb-release, procps, python3, python3(OpenGL) < 0, python3(OpenGL.GL) < 0, python3(OpenGL.GLU) < 0, python3(OpenGL.raw.GLX._types) < 0, python3(PyQt5) < 0, python3(PyQt5.QtCore) < 0, python3(PyQt5.QtDesigner) < 0, python3(PyQt5.QtGui) < 0, python3(PyQt5.QtPrintSupport) < 0, python3(PyQt5.QtWidgets) < 0, python3(__future__) < 0, python3(array) < 0, python3(binascii) < 0, python3(cairo) < 0, python3(collections) < 0, python3(configobj) < 0, python3(configparser) < 0, python3(copy) < 0, python3(ctypes) < 0, python3(datetime) < 0, python3(dbus) < 0, python3(decimal) < 0, python3(enum) < 0, python3(fcntl) < 0, python3(fnmatch) < 0, python3(functools) < 0, python3(getopt) < 0, python3(gettext) < 0, python3(gi) < 0, python3(gi.repository) < 0, python3(glib) < 0, python3(glob) < 0, python3(hashlib) < 0, python3(importlib) < 0, python3(inspect) < 0, python3(json) < 0, python3(locale) < 0, python3(logging) < 0, python3(math) < 0, python3(mimetypes) < 0, python3(numpy) < 0, python3(numpy.core) < 0, python3(operator) < 0, python3(optparse) < 0, python3(os) < 0, python3(pickle) < 0, python3(random) < 0, python3(re) < 0, python3(readline) < 0, python3(select) < 0, python3(serial) < 0, python3(shutil) < 0, python3(signal) < 0, python3(socket) < 0, python3(string) < 0, python3(struct) < 0, python3(subprocess) < 0, python3(tarfile) < 0, python3(tempfile) < 0, python3(textwrap) < 0, python3(threading) < 0, python3(tkinter) < 0, python3(traceback) < 0, python3(types) < 0, python3(uuid) < 0, python3(validate) < 0, python3(warnings) < 0, python3(webbrowser) < 0, python3(xml.dom.minidom) < 0, python3(xml.etree.ElementPath) < 0, python3(xml.etree.ElementTree) < 0, python3(yapps) < 0, python3.11-ABI, rtld(GNU_HASH), sudo, tcl, tcl(BWidget), tcl(Tk), tcl(Tk)-8 >= 8.0, termutils, tk, typelib(GLib), typelib(GObject), typelib(Gdk), typelib(GdkPixbuf), typelib(GdkX11), typelib(Gio), typelib(Gst), typelib(Gtk), typelib(GtkSource), typelib(Notify), typelib(Pango), typelib(PangoCairo), typelib(Vte), util-linux, xdpyinfo Requires(rpmlib): rpmlib(SetVersions) Obsoletes: linuxcnc-data <= 2.9.1-alt2.20231009 Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.Y7rNBf Creating linuxcnc-debuginfo package Processing files: liblinuxcnc-devel-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.1AmzA4 find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.mWZWbW find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/modal_state.hh:25:10: fatal error: vector: No such file or directory 25 | #include | ^~~~~~~~ compilation terminated. cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh: cpp failed, trying c++ mode /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh: cpp failed /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh:19:10: fatal error: rpc/rpc.h: No such file or directory 19 | #include /* struct XDR */ | ^~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h:24: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h:20: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h:34: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h:33: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h:40: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h: cpp failed In file included from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/object_fwd.hpp:8, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh:27: /usr/include/boost/python/detail/wrap_python.hpp:57:11: fatal error: pyconfig.h: No such file or directory 57 | # include | ^~~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh: cpp failed ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.1-alt2.20231009, /usr/lib/liblinuxcnchal.so.0, /usr/lib/liblinuxcncini.so.0, /usr/lib/libnml.so.0, /usr/lib/libposemath.so.0, /usr/lib/libpyplugin.so.0, /usr/lib/librs274.so.0, /usr/lib/libtooldata.so.0, boost-devel-headers Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.XVx3S2 Processing files: liblinuxcnc-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.cVAMd7 find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0: 119 symbols, 17 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcncini.so.0: 35 symbols, 16 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libnml.so.0: 836 symbols, 20 bpp warning: hash collision: _ZN3NML12format_inputEP6NMLmsg count_characters_in_print_list lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libposemath.so.0: 415 symbols, 19 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libpyplugin.so.0: 23 symbols, 15 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/librs274.so.0: 2001 symbols, 21 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libtooldata.so.0: 21 symbols, 15 bpp Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.jM5Tt9 find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: liblinuxcnchal.so.0 = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2, liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0QglXYuh9w4nU6472TqASbUMZzhuUpq1XaKcom1djYYwSVwS7phRSmhfo, libnml.so.0 = set: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, libposemath.so.0 = set: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, libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxAjT5GzcsH3a2zLVzhb, librs274.so.0 = set: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, libtooldata.so.0 = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Requires: libboost_python311.so.1.83.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNuojQRqzp5SpoxPKmKTnJQ2USkkKqHp5h4X8nhmZbVJeHI3ENEULfvnhZ91wcZ0CZvtZ8nZ1cmY40zffx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.9), libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_4.0.0), libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libpython3.11.so.1.0 >= set:oi0GOBAUI3x9Zm2hWASt1vZ3R4nYYfA4VAH3joq8Yna2GUTvbSg3QBmBWdwKz06SOh5x1fxZEHbvodwVQDokPlMCfIgsrE3xO1AuPv374qZiTjyQZcRdeSUEtPaaoPfwkCRbdyfJ0, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.5), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.18), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.26), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtirpc.so.3 >= set:miLQRMTfkMBlyKlAtNseOZekznKvK3HZEZCwnOh, libtirpc.so.3(TIRPC_0.3.0), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.5T8hRw Creating liblinuxcnc-debuginfo package Processing files: linuxcnc-debuginfo-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.PkQ0dF find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.OiNpFB find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.1-alt2.20231009, /usr/lib/debug/lib/ld-linux.so.2.debug, debug(libX11.so.6), debug(libXinerama.so.1), debug(libXmu.so.6), debug(libboost_python311.so.1.83.0), debug(libc.so.6), debug(libcairo.so.2), debug(libepoxy.so.0), debug(libgcc_s.so.1), debug(libgdk-3.so.0), debug(libgdk-x11-2.0.so.0), debug(libglib-2.0.so.0), debug(libgobject-2.0.so.0), debug(libgtk-3.so.0), debug(libgtk-x11-2.0.so.0), debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libm.so.6), debug(libmodbus.so.5), debug(libnml.so.0), debug(libpango-1.0.so.0), debug(libpangocairo-1.0.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(libpython3.11.so.1.0), debug(libreadline.so.8), debug(librs274.so.0), debug(libstdc++.so.6), debug(libtk8.6.so), debug(libtooldata.so.0), debug(libudev.so.1), debug(libusb-1.0.so.0) Processing files: liblinuxcnc-debuginfo-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.PCutb9 find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.yfzBvV find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libnml.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(librs274.so.0), debug(libtooldata.so.0) Requires: liblinuxcnc = 2.9.1-alt2.20231009, debug(libboost_python311.so.1.83.0), debug(libc.so.6), debug(libgcc_s.so.1), debug(libm.so.6), debug(libpython3.11.so.1.0), debug(libstdc++.so.6), debug(libtirpc.so.3) Adding to liblinuxcnc-devel a strict dependency on linuxcnc Adding to linuxcnc a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on linuxcnc Adding to liblinuxcnc-debuginfo a strict dependency on liblinuxcnc Adding to liblinuxcnc-devel a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on liblinuxcnc-debuginfo Removing from linuxcnc-debuginfo 47 sources provided by liblinuxcnc-debuginfo also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/emc/pythonplugin also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/cms also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/linklist also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/nml also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/os_intf also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/posemath also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/rcs Removing 7 extra deps from linuxcnc due to dependency on liblinuxcnc Removing 7 extra deps from liblinuxcnc-devel due to dependency on liblinuxcnc Removing 7 extra deps from linuxcnc-debuginfo due to dependency on liblinuxcnc-debuginfo Removing 1 extra deps from liblinuxcnc-devel due to repentancy on linuxcnc Removing 31 extra deps from linuxcnc due to repentancy on liblinuxcnc Removing 6 extra deps from linuxcnc-debuginfo due to repentancy on liblinuxcnc-debuginfo Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-2.9.1-alt2.20231009.i586.rpm (w2T8.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-devel-2.9.1-alt2.20231009.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-2.9.1-alt2.20231009.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm (w2T8.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm (w2T8.xzdio) 475.59user 110.24system 3:57.82elapsed 246%CPU (0avgtext+0avgdata 472468maxresident)k 0inputs+0outputs (0major+24666483minor)pagefaults 0swaps 8.86user 3.29system 5:09.87elapsed 3%CPU (0avgtext+0avgdata 128604maxresident)k 9024inputs+0outputs (0major+381720minor)pagefaults 0swaps --- linuxcnc-2.9.1-alt2.20231009.i586.rpm.repo 2023-10-13 10:18:12.000000000 +0000 +++ linuxcnc-2.9.1-alt2.20231009.i586.rpm.hasher 2023-11-11 07:29:12.087268014 +0000 @@ -7064,3 +7064,3 @@ File: /etc/linuxcnc 40755 root:root -File: /etc/linuxcnc/rtapi.conf 100644 root:root d9d8a63a3001266e79a4756ff3b03671 +File: /etc/linuxcnc/rtapi.conf 100644 root:root 8f70fb32e7976d6efbef31e0448c68b9 File: /lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 @@ -7364,3 +7364,3 @@ File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root 4386ca6e56340a069fbc9559cc7e398e -File: /usr/lib/linuxcnc/realtime 100755 root:root 8d81d22c7ce98701134e4ae0bdd1496a +File: /usr/lib/linuxcnc/realtime 100755 root:root 140ca066ac75305424ddd5b3ffced749 File: /usr/lib/python3/site-packages/__pycache__ 40755 root:root @@ -12364,3 +12364,3 @@ File: /usr/share/man/man1/panelui.1.xz 100644 root:root 61f547f5665fc80d03da476743e17d4d -File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 3380384ab8896635439b44162347af12 +File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 259ece95cf75b3af6ffddb798c4d1769 File: /usr/share/man/man1/pmx485-test.1.xz 100644 root:root 20b815b28f4df48358282e8d88b3a0fa @@ -12393,3 +12393,3 @@ File: /usr/share/man/man1/teach-in.1.xz 100644 root:root fc226b9d2b564e3fad4c5ff0b945c813 -File: /usr/share/man/man1/thermistor.1.xz 100644 root:root 52e2ceb240ac2a0486a79bd573f16efe +File: /usr/share/man/man1/thermistor.1.xz 100644 root:root 7256af72ceb690981515000fe3de56be File: /usr/share/man/man1/tooledit.1.xz 100644 root:root c7d86f1ec43340e80f69de9a88166fd8 @@ -12399,3 +12399,3 @@ File: /usr/share/man/man1/vfs11_vfd.1.xz 100644 root:root 65395473fdddbe5a7f8789b49d8b6b37 -File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root f9bfd6955ae956a7cd19f2d5bcafd87e +File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root da4f851fda762e6d3475d3a65f41726d File: /usr/share/man/man1/xhc-hb04-accels.1.xz 100644 root:root 0cff8637e027604edb6d81ff9beaa4ff @@ -12520,44 +12520,44 @@ File: /usr/share/man/man3/undocumented.3rtapi.xz 100644 root:root 002b721b89292b438d9dbf89f1ff823b -File: /usr/share/man/man9/abs.9.xz 100644 root:root 9159f9727a60c30b384b45f690beeabd -File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root ffa7a3e89f79cd4782ce828eb18ddcbf -File: /usr/share/man/man9/and2.9.xz 100644 root:root 15d2ecec6ff68e9746d9034784efd6d6 -File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 387099801f234ea32b0d2c23d6ff1ee8 +File: /usr/share/man/man9/abs.9.xz 100644 root:root b0e682f7e80b37ce1e29025f0fbe055d +File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root c538e478032500d30ada90a495eb4afe +File: /usr/share/man/man9/and2.9.xz 100644 root:root d09d82978b4fc248f482715250b5ff7d +File: /usr/share/man/man9/anglejog.9.xz 100644 root:root e7edc65c07a1f5eac3dacf2465eb929b File: /usr/share/man/man9/at_pid.9.xz 100644 root:root d578fa506b91fa3aa94136679b39f656 File: /usr/share/man/man9/axis.9.xz 100644 root:root f688c161a447b4d64af5406eaa4b3c09 -File: /usr/share/man/man9/axistest.9.xz 100644 root:root ffc492af4a1626b7c17ae15d46aeb921 -File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 1cd31734d9ac11f65a37debef333a420 -File: /usr/share/man/man9/biquad.9.xz 100644 root:root 17958b5c35c86029137bee53e2f0acb0 -File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 79e171697af6d2a50b078febe40bae9c -File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 85744c2d7721e8e30b55a1d0ce32f2ef -File: /usr/share/man/man9/bldc.9.xz 100644 root:root ff66fdf4e01b9ba3b7b6a3bf1d7b1da4 -File: /usr/share/man/man9/blend.9.xz 100644 root:root 67b6d90cf18373df7bf3e71523844717 -File: /usr/share/man/man9/carousel.9.xz 100644 root:root 68306a0b9d5620493325fbf57e1067bb -File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root 4cce2cb7fa3ed7dde33da8109e0f4f8d -File: /usr/share/man/man9/clarke2.9.xz 100644 root:root b6d8c436901a80d462d4609039d12dd9 -File: /usr/share/man/man9/clarke3.9.xz 100644 root:root a7c01c768fdb0abc299d9738caee730f -File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 97c3a03737f41cdd951252fbb96f4f5f +File: /usr/share/man/man9/axistest.9.xz 100644 root:root ba6a4b71d428e0b6e6c4c6b9b8bb13ee +File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 14a887fa5ff22bf37a4fc001200f2a4c +File: /usr/share/man/man9/biquad.9.xz 100644 root:root 1ae6111cebe118b491adaa52baef172e +File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 76ae002dddcbccbd3ea8c309f24737cb +File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 543416498f49633c9168d78af6e03f0d +File: /usr/share/man/man9/bldc.9.xz 100644 root:root 63b2ff886d84611b1d404d47b1dceccf +File: /usr/share/man/man9/blend.9.xz 100644 root:root 00a68706ebe9c49094dd7a686cc813c8 +File: /usr/share/man/man9/carousel.9.xz 100644 root:root 0d87f9ffc4c38824a44f209374ed1bad +File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root 4c58b5fe51b3ad10fff05bd4106428c1 +File: /usr/share/man/man9/clarke2.9.xz 100644 root:root df9acbe4321d347306c26f2576ee9866 +File: /usr/share/man/man9/clarke3.9.xz 100644 root:root 551bd791a4a8423ef6a5a66a0b0b836d +File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root f7c27a47f2809467c437c87a6bca355c File: /usr/share/man/man9/classicladder.9.xz 100644 root:root 0a15b834496451ff9a41f7297f36b0f0 -File: /usr/share/man/man9/comp.9.xz 100644 root:root ae6d9df66f498d9dfbad6a5ffad0e10f -File: /usr/share/man/man9/constant.9.xz 100644 root:root 78c24a5c17487a1161c0b92ddcfc9836 -File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root bdbac3929036dfb4ba9d3df700855a00 -File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root ec4fba260f7c9904b7a06e335798ab51 -File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 783a9c34277f88bc4de1a7c3a8256f6b -File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 03e051ccd95aa72b0a4fe51b2432bf12 -File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root 4b4feb27614f5fcc820042b52b1f8bb9 -File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 3eb9f69680c51defbf94ac70bcebdd9f -File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 1fb0cf30bf25f39b371acb1fe547e6be -File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 23eb1b08eeee47278f5b0b3122fd2ead -File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root a13e49161f109d47fbcb82a6ed50048a -File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 3bd7f1682a0629fcdcf3a56a0dd2249d -File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root fdb84556d7a694b9e111e3584c03d6e6 -File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root 00bcb25c4c37f84ea284e2af584a57f5 +File: /usr/share/man/man9/comp.9.xz 100644 root:root 58fc0662d7f35f9eeca914304a81ec2c +File: /usr/share/man/man9/constant.9.xz 100644 root:root 0e59e8e0fbcaa55edf69e8033e7a690e +File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 3f829f0778f1f0a48d584fda5d4a91a5 +File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root 5ae71ea37aac59b1748a8648a39539b5 +File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root a202aa7b5d9f289511aaeef3c5cbba72 +File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root b989b81dfc59dfe86a257a447b2fc25f +File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root b658ea956f49ccc9d139957c0f5f5efb +File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 7cb7b76ac9b382edad0e2324dc9f5c32 +File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 2b624659470385366656111659963905 +File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root c3a6ac06904e6560ebf0018aa17889f4 +File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root c4eb0f58bd22f5ff7d21f12a87f4949b +File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root c34f134df814d24473c5fcefe7e135ba +File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 17f76bef856638dd67fe230bf5d963a9 +File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root b945db1b5be5dcd1899141652ed3f057 File: /usr/share/man/man9/counter.9.xz 100644 root:root 83f81a48047a93aac54a70c298a8b8ee -File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 9a0ac84171f736efdd38791cd286e916 -File: /usr/share/man/man9/ddt.9.xz 100644 root:root e4106768a1296c0ee758d6a97e02c4c0 -File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 450178e1085858b1ff4b5a6abd8f00b2 +File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 71cb8c9ee539f44cde0b1049d95fa66a +File: /usr/share/man/man9/ddt.9.xz 100644 root:root 1f50c34377cfd268e4f7ea72d0a00c4b +File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 1f2767882b422fd0a2178a5a8128920c File: /usr/share/man/man9/debounce.9.xz 100644 root:root bd2406b69a89bf1c3ef92b42bfe93f3d -File: /usr/share/man/man9/demux.9.xz 100644 root:root 9722fa94bc4fc2a11d8402f3174bb70c -File: /usr/share/man/man9/differential.9.xz 100644 root:root de3696303dd9083199a5fea741169726 -File: /usr/share/man/man9/div2.9.xz 100644 root:root 53c069918ceac9724f036be059f0d390 -File: /usr/share/man/man9/edge.9.xz 100644 root:root ccbfacd77a03a727edf7524dfa65fb41 +File: /usr/share/man/man9/demux.9.xz 100644 root:root 81f35d92602c7660ae41073dfcc68dc7 +File: /usr/share/man/man9/differential.9.xz 100644 root:root 4e971bde673af98dbda098787fd69046 +File: /usr/share/man/man9/div2.9.xz 100644 root:root 82bf2729d9e1233eb7e16223656b8343 +File: /usr/share/man/man9/edge.9.xz 100644 root:root 87101fa7423ed1700a1bf0fd0a8060eb File: /usr/share/man/man9/encoder.9.xz 100644 root:root 12631bc793eb57261edeccfb1868447a @@ -12565,10 +12565,10 @@ File: /usr/share/man/man9/enum.9.xz 100644 root:root aeaf0343bfe8d0971b11eed24dfef9ea -File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 8a69410731644a864f541d761d7bdf9a -File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root e1d008abb3134ccc3aa8038b7a67acd3 -File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root e076c7f50682d5ca9dc354df0dc778fd -File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root e97dad99303f87b60654a158371e2958 -File: /usr/share/man/man9/flipflop.9.xz 100644 root:root d13865d802a4a20fbb1ad0a4b1381d12 -File: /usr/share/man/man9/gantry.9.xz 100644 root:root 22d811d725e6a9e280ff16dea1142db3 +File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 4c7328783df52cce4d41f3d7e3167940 +File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 5c9b3baa16537e0e3846b887f90c5f3a +File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root e96a4f4dfe3786fe9f24f622fc2b167d +File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 56202d6722d287b4a1892e00e9dd8a9e +File: /usr/share/man/man9/flipflop.9.xz 100644 root:root 3e20576effd2c746b1af807eff15a353 +File: /usr/share/man/man9/gantry.9.xz 100644 root:root 87f4a20d2b31656fb2ec296bb676664b File: /usr/share/man/man9/gantrykins.9.xz 100644 root:root a388b2c041c10d2e154213b6a190d69e -File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 90040c4b0e8d15e418dda9f3511af813 +File: /usr/share/man/man9/gearchange.9.xz 100644 root:root c35eed771ff33a0218fba9ef71f0b8f2 File: /usr/share/man/man9/genhexkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12577,6 +12577,6 @@ File: /usr/share/man/man9/gladevcp.9.xz 100644 root:root 26d85cce38cef8e5cee1a6845d897b4d -File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 4437e473dc29e665053d30f974b3b5f8 +File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root e5593dcff52f428f0a60591c0aa8c778 File: /usr/share/man/man9/hal_bb_gpio.9.xz 100644 root:root b8610c3245eb6a6a34b2071dae79effe File: /usr/share/man/man9/hal_parport.9.xz 100644 root:root 0e9862dfa7a66f23eff384631bc10a25 -File: /usr/share/man/man9/histobins.9.xz 100644 root:root 19689681dc722d806b1b5bb6f1bf0c4d +File: /usr/share/man/man9/histobins.9.xz 100644 root:root 970a984101b29806c15aa964a72db0a2 File: /usr/share/man/man9/hm2_7i43.9.xz 100644 root:root ec628cb4aadd965825a78075995c1e2e @@ -12587,54 +12587,54 @@ File: /usr/share/man/man9/hm2_spi.9.xz 100644 root:root 382b4ac9c860f7945c061b1e9bd15cdf -File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 4bcf93b68f9ca8c268e488399a1f9653 +File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 6f67b92da5cf181b8ea5c3244faf4d4a File: /usr/share/man/man9/hostmot2.9.xz 100644 root:root 65c28ac9f89cfc19cb43607dd0b6561b -File: /usr/share/man/man9/hypot.9.xz 100644 root:root 8bc016b9f82e3e5d0b253bd41c001a5d -File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 62e64ed3fa6bee995f2641c955e6f206 -File: /usr/share/man/man9/integ.9.xz 100644 root:root 5d2afd14cc7b019debb78dcb7c620a64 -File: /usr/share/man/man9/invert.9.xz 100644 root:root 33e0ad4b7dec45fa2a405e7692dc02ae -File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root d6809315b6090df6e32c86d2f63beed5 +File: /usr/share/man/man9/hypot.9.xz 100644 root:root e218b6c85b916074b2b75e6df2646e7a +File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 12f35929c06ba41dd234b5366e98d213 +File: /usr/share/man/man9/integ.9.xz 100644 root:root 11a9c4ee6f5353feceaef5e70764d99c +File: /usr/share/man/man9/invert.9.xz 100644 root:root b1a063e2d63135a706029200eda14768 +File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root 87aa7e3d4f998e55f7b1d169abba5ec8 File: /usr/share/man/man9/kins.9.xz 100644 root:root 7ef613a8265b032556c4e99f80eeee38 -File: /usr/share/man/man9/knob2float.9.xz 100644 root:root d7a1d768f990c0c6ed14a2daeffe2d6f -File: /usr/share/man/man9/latencybins.9.xz 100644 root:root 66452db0ed56fd9cd786e5548c53e033 +File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 67b1ab82f0c4e1679a9a4d78785bd6d3 +File: /usr/share/man/man9/latencybins.9.xz 100644 root:root e8b827405004935f6de66ece7f145c81 File: /usr/share/man/man9/lcd.9.xz 100644 root:root 620cc2889dca47fa4e7586ff480ba974 -File: /usr/share/man/man9/limit1.9.xz 100644 root:root e15e722cecaceb8d1598814b9f580ac1 -File: /usr/share/man/man9/limit2.9.xz 100644 root:root d300c6d614e125ce65016f4953faa567 -File: /usr/share/man/man9/limit3.9.xz 100644 root:root c6433dd50bcdb4a809a763d9a4862276 -File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root e4907016e8a473a0accbdc65ae03886c -File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 8e22f7ecff65a7e0cb5482a0b52f082a +File: /usr/share/man/man9/limit1.9.xz 100644 root:root 8a955b76c92bbf2e26addb7303e482b2 +File: /usr/share/man/man9/limit2.9.xz 100644 root:root 76c5afb2b26377624693d7e7ebca98ce +File: /usr/share/man/man9/limit3.9.xz 100644 root:root bc554279f03b2452fccb469b5f3c0e05 +File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root c9eeca72aa36e792d9c878889d1f9cb5 +File: /usr/share/man/man9/lincurve.9.xz 100644 root:root ce9fc0620cf4131693bc3789bbc908fc File: /usr/share/man/man9/lineardeltakins.9.xz 100644 root:root ce6ac2a9983a327635ddcd90d0e26def -File: /usr/share/man/man9/logic.9.xz 100644 root:root 5e672815ee320ad34e905931c1384208 -File: /usr/share/man/man9/lowpass.9.xz 100644 root:root c67022d9f51a8e9879fae4bb6fff0aa8 -File: /usr/share/man/man9/lut5.9.xz 100644 root:root 8155731ab5077bb0dad451d07e0ff2fc -File: /usr/share/man/man9/maj3.9.xz 100644 root:root 97c6e5f0e65c961829cec56fb5e6870b -File: /usr/share/man/man9/match8.9.xz 100644 root:root a9e7f91352d9308d2658e9f33a7675f1 +File: /usr/share/man/man9/logic.9.xz 100644 root:root a26f20098b3816dff4d845ee83b8cb62 +File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 3d9166cee31983ec1939b96b353d4fbd +File: /usr/share/man/man9/lut5.9.xz 100644 root:root a7a9e627c130ab67534c24baafeaab40 +File: /usr/share/man/man9/maj3.9.xz 100644 root:root fa647032934a78764bb5a13d9a9b87e6 +File: /usr/share/man/man9/match8.9.xz 100644 root:root 13574b261cdc7838013c26f67591d37e File: /usr/share/man/man9/matrix_kb.9.xz 100644 root:root 339c35c251b89cbdb7a0e83bce7035d9 -File: /usr/share/man/man9/max31855.9.xz 100644 root:root ad7990e928d36051c45bf8b0aa5e2286 +File: /usr/share/man/man9/max31855.9.xz 100644 root:root 08d75041cb4eadd7ffc13f793ac4e08c File: /usr/share/man/man9/maxkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root 453c3fc8d0ac810384daaf7c1c05f71b -File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root f7f60076abaeaaaa98687c654fe27caf -File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 92032cf347b57a15e8fdd0354e17d892 -File: /usr/share/man/man9/message.9.xz 100644 root:root aa98b80033decf45ff35eba6a2aac2b6 -File: /usr/share/man/man9/millturn.9.xz 100644 root:root b2e0d357b96b5a9cec1011258a087103 -File: /usr/share/man/man9/minmax.9.xz 100644 root:root bd130911034bde8b959cdd1b2750116b +File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root 82f159ea66f6b06fefa13c0f2808b1d9 +File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root 71527b7cf040b11b0014bfc5008005df +File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root d6f3d94d78cfbdd42381e0372c6e3057 +File: /usr/share/man/man9/message.9.xz 100644 root:root 73585718661f280c160068642f484656 +File: /usr/share/man/man9/millturn.9.xz 100644 root:root 4d49ef4575f21b94651e714169a38136 +File: /usr/share/man/man9/minmax.9.xz 100644 root:root f2eca99ae2a8dd220a4d86d0a69448c2 File: /usr/share/man/man9/motion.9.xz 100644 root:root 52de9abe229c718ed49a6e7c1fc183b4 -File: /usr/share/man/man9/moveoff.9.xz 100644 root:root d6e0c950c55a5b4291cc6ad50a4842e1 -File: /usr/share/man/man9/mult2.9.xz 100644 root:root f76045003604446e15b4e49fe57174a0 -File: /usr/share/man/man9/multiclick.9.xz 100644 root:root a5c1b320d56ef1daaa1b7e3506111de0 -File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 2708d83c3d8b96861644e8fd80eda1ad -File: /usr/share/man/man9/mux16.9.xz 100644 root:root e6a3abb01d8bd03f3a019e871486ed14 -File: /usr/share/man/man9/mux2.9.xz 100644 root:root 21bd2b71212761d79c686dd7a677a845 -File: /usr/share/man/man9/mux4.9.xz 100644 root:root 718d484838c85759c715531bbae72e0a -File: /usr/share/man/man9/mux8.9.xz 100644 root:root 43c0e23e6539c2ebab48773a63f3473e +File: /usr/share/man/man9/moveoff.9.xz 100644 root:root d4df07831fe3e11ea398e05b88459e0f +File: /usr/share/man/man9/mult2.9.xz 100644 root:root 39bd4104d545cbdfba10324d555225ad +File: /usr/share/man/man9/multiclick.9.xz 100644 root:root 9b9a15b0b4a983053026280e8f07ee70 +File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 45775daa0aaeb06c9be01c00d66c9ccf +File: /usr/share/man/man9/mux16.9.xz 100644 root:root 653806c6ad8be96bd5cbdb04ccd93dca +File: /usr/share/man/man9/mux2.9.xz 100644 root:root d02094b3c99b1d62173861741a6738c7 +File: /usr/share/man/man9/mux4.9.xz 100644 root:root 638fe2db0a79ef8b2242dd37f1f2ffb1 +File: /usr/share/man/man9/mux8.9.xz 100644 root:root 16763f9477e1dfb1625ddb82f1a9bf00 File: /usr/share/man/man9/mux_generic.9.xz 100644 root:root 81ed0423e2b5c893c152d9ed4491b0f5 -File: /usr/share/man/man9/near.9.xz 100644 root:root 5d85828ca363dd135ff2f889d3952971 -File: /usr/share/man/man9/not.9.xz 100644 root:root cfa76ad30120aa0aaf10190f6182b001 -File: /usr/share/man/man9/offset.9.xz 100644 root:root 0a00fbba2074fe059807eb788657348b -File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 1b8072b813a3f817436b558a386152a7 -File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 8573dd140e489f7fed9bab94625bc699 +File: /usr/share/man/man9/near.9.xz 100644 root:root 72bd3288246d6e3afab5b7ef5b9cfd07 +File: /usr/share/man/man9/not.9.xz 100644 root:root 205cd9ee59783adc40d6a56c8e480fe4 +File: /usr/share/man/man9/offset.9.xz 100644 root:root 8a537344e5eb9d2adca825639134ec7b +File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 0faf9da795b2dbf15243044924e0d7b2 +File: /usr/share/man/man9/oneshot.9.xz 100644 root:root e19e60ac896d2ea3a6fbc11695cd3421 File: /usr/share/man/man9/opto_ac5.9.xz 100644 root:root ed6aa04a42b4697aea2bc5fc7de8500a -File: /usr/share/man/man9/or2.9.xz 100644 root:root de750267438fdad20897b3715a5cf601 -File: /usr/share/man/man9/orient.9.xz 100644 root:root aa863acf99302d48c5d11069937e846f +File: /usr/share/man/man9/or2.9.xz 100644 root:root 50aeef12bd2eea999c79be4d508f9a3f +File: /usr/share/man/man9/orient.9.xz 100644 root:root f8d5e74eec86069d175c679c79002e7d File: /usr/share/man/man9/pentakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 File: /usr/share/man/man9/pid.9.xz 100644 root:root 9106a5d37a8880989de46921cdb78588 -File: /usr/share/man/man9/plasmac.9.xz 100644 root:root c108ef9878673c4e791a37a5e32d9152 +File: /usr/share/man/man9/plasmac.9.xz 100644 root:root a6ebea5a4ab2891dd00e93cb39b6687d File: /usr/share/man/man9/pumakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12643,52 +12643,52 @@ File: /usr/share/man/man9/rotatekins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root b79c79b43e5beb682d43ba02f2b9c746 +File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 0eb1ca37b476d907c07aca24b2297ebd File: /usr/share/man/man9/sampler.9.xz 100644 root:root 713192b4e67ac75366e7848681137025 -File: /usr/share/man/man9/scale.9.xz 100644 root:root 167a379a502abfa05752dce7157bbfe3 -File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 896e6dabf97b9f717e9ad2d11cde2871 +File: /usr/share/man/man9/scale.9.xz 100644 root:root de2f9ea7e2f6c7aa95a700985424638d +File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root f62b3e66ca47d545bccd35c9bc4cd440 File: /usr/share/man/man9/scarakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/select8.9.xz 100644 root:root 5a9b34ad64f1c37c0b721f57331a9c06 -File: /usr/share/man/man9/serport.9.xz 100644 root:root b1b816d4945ad19b32992d83083dc42f +File: /usr/share/man/man9/select8.9.xz 100644 root:root 916e604f4f7af354f8add3860a1f8742 +File: /usr/share/man/man9/serport.9.xz 100644 root:root 89d3e1f502d47b60feef9da177604ff8 File: /usr/share/man/man9/setsserial.9.xz 100644 root:root a0c4c6061b229bf1b0bd7b45aa0a6d1b File: /usr/share/man/man9/siggen.9.xz 100644 root:root bb8a58ed0261c53246a616a6e5859857 -File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 740f05e0e89d1597aa3815b03718755c +File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root ab397bb8a2427499f807fecacfcfb8b7 File: /usr/share/man/man9/sim_encoder.9.xz 100644 root:root 1061200399dc5f45100c0b9ac0b34ddc -File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root ae120740da8a7731cf4d6e1860edd819 -File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root d549227e8bafa9c9f9fef3751964271d -File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root d190fe2872648c910c5e6c4bc5ac2bb8 -File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root e159c5cd1c2dbb8abb3e140f8e7e757d -File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root ac776ca200c95805c2e360b042932da9 -File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root bf6da7c3ad05e159af93fc5065ae82a0 -File: /usr/share/man/man9/spindle.9.xz 100644 root:root 344cafde18634f3c06ced0f2d6e04b3f -File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root bf706b0c806758419a1763225dd00370 +File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 867c605dfe6dc8e4d581b2209329d9e3 +File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root 99bf77761e9dd9b7202c97c11e14eba7 +File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 633323d067ba1c25ebc034fa17242685 +File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 8093033a0f07b08a9c44f373cc48d831 +File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 5bbeaf4741278d148de587265b6ae0dd +File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 0fda32eb5f9a72667d152d638ac879a4 +File: /usr/share/man/man9/spindle.9.xz 100644 root:root bcc7c520e32c6b672b68c700853dff30 +File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 89dd6adb4a8254f26279f0598c26e14e File: /usr/share/man/man9/sserial.9.xz 100644 root:root cda27ad79b3b748fe69d3aa6133dbdf9 File: /usr/share/man/man9/stepgen.9.xz 100644 root:root 1151c7075a51ad05e9e82ff643cce6a9 -File: /usr/share/man/man9/steptest.9.xz 100644 root:root 3d16d82a42cfcfc40ebcbb60eaa2f018 +File: /usr/share/man/man9/steptest.9.xz 100644 root:root 7f71195d3ab53f271c6b79db665e4a03 File: /usr/share/man/man9/streamer.9.xz 100644 root:root d43c7f2928b8ecb99d6707ebc18db847 -File: /usr/share/man/man9/sum2.9.xz 100644 root:root 7ac5d7227733873a91e98d77d184e83c +File: /usr/share/man/man9/sum2.9.xz 100644 root:root b72a02521eeea0bb1e80ecaa085444f8 File: /usr/share/man/man9/supply.9.xz 100644 root:root 760e3e6615392513db8cc348d9c1147b -File: /usr/share/man/man9/thc.9.xz 100644 root:root 1c79c91e936bf5719ddf2bb236d8df57 -File: /usr/share/man/man9/thcud.9.xz 100644 root:root 173b28b294e8baf0e39fb1cca65e49a9 +File: /usr/share/man/man9/thc.9.xz 100644 root:root 6fd11ac46c02280f0df067dcc2a5cedb +File: /usr/share/man/man9/thcud.9.xz 100644 root:root 599892e2f574130b5f297c6bde8209cd File: /usr/share/man/man9/threads.9.xz 100644 root:root 0a89f5af89b5cdf6d132fcfb19ba8726 -File: /usr/share/man/man9/threadtest.9.xz 100644 root:root 20746364b38745cdc3d195839c3accfd -File: /usr/share/man/man9/time.9.xz 100644 root:root 9ad434a86679061255fdf797ea0ddb74 -File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 56a032a911b0bb3f135617dc8111b744 -File: /usr/share/man/man9/timedelta.9.xz 100644 root:root e9177b9710cf680b262137a6f1b216d7 -File: /usr/share/man/man9/tof.9.xz 100644 root:root 092ed2c520b566054e6eee3b6b4e51b1 -File: /usr/share/man/man9/toggle.9.xz 100644 root:root f1e35be676ada6751d0d78ff761b4f5d -File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 5edf20a9e75b05eeaf7ae35cb1be17dd -File: /usr/share/man/man9/ton.9.xz 100644 root:root a8168f4cf05c8cd3195ca23e5040a9c2 -File: /usr/share/man/man9/tp.9.xz 100644 root:root e7ba6b0cb25960944f1ec55ded74855f -File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 142f39153c71b14533e8664c744fca42 +File: /usr/share/man/man9/threadtest.9.xz 100644 root:root b75ce93f986388ae2c71734513dd7bc1 +File: /usr/share/man/man9/time.9.xz 100644 root:root 1384f5cc5c15f9503a41076dd36a475d +File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 827fa14349d4c536eaed10bfe7cf5fcb +File: /usr/share/man/man9/timedelta.9.xz 100644 root:root adb9a5edc2d00989cd260ddd2ea57296 +File: /usr/share/man/man9/tof.9.xz 100644 root:root c314e4d7dec00d6d173af63323cd4348 +File: /usr/share/man/man9/toggle.9.xz 100644 root:root cf1cf4ad84e937618d4159bd6ae73759 +File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root ba56ec5aa44d6f4b0ce1f777603f0848 +File: /usr/share/man/man9/ton.9.xz 100644 root:root 7f6fed58772950faf8ec717e7a75d97c +File: /usr/share/man/man9/tp.9.xz 100644 root:root a78cce131fa3589e672f04d62c2e916b +File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 1e162e8c13c02773c0d977fe03f99f99 File: /usr/share/man/man9/tripodkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 27fb075716d7eb29249c0f376c40023c -File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root b9958416f392a54cfa88ec0844444a05 +File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 7789b2ace48c9a11b703c454657c9736 +File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root 664896d12438c5bb0a53b0fb6d6738b9 File: /usr/share/man/man9/trivkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/updown.9.xz 100644 root:root 7c0a2e9e9a39a57562ca7adb56999d73 -File: /usr/share/man/man9/userkins.9.xz 100644 root:root 93f0fff4e5b992800c6644c5333f331f +File: /usr/share/man/man9/updown.9.xz 100644 root:root 202af3bd7093c146505a09308dd2b032 +File: /usr/share/man/man9/userkins.9.xz 100644 root:root d9d11bb0f1ef62c5a944f8c7686462f6 File: /usr/share/man/man9/watchdog.9.xz 100644 root:root 3ccf8bb1e89f95bd9212dab04d95b193 -File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 21e69239660467fa0db0e96b8ede8eec +File: /usr/share/man/man9/wcomp.9.xz 100644 root:root e1979591d08b5af113351cec511c45ae File: /usr/share/man/man9/weighted_sum.9.xz 100644 root:root eb6db3b792484b220170ad1fd6fce770 -File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 696a22f91b8a5a09c8d8db73c8b47e12 -File: /usr/share/man/man9/xor2.9.xz 100644 root:root bb8b394788eb2d5b6e04dab2d4d2a894 -File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root e243796c33baeea9c997e3dcbfcb5549 +File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 6d44e21cfb3a3a4612dd6d6561343055 +File: /usr/share/man/man9/xor2.9.xz 100644 root:root 20c2d0ebd941d91f849b14c7fda03996 +File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root 964376ce4ab7ab861afca38734986a57 File: /usr/share/qtvcp 40755 root:root @@ -13644,2 +13644,2 @@ File: /usr/share/qtvcp/widgets_ui/virtual_keyboard.ui 100644 root:root e757c13d9a96b2fb641409c70442ded6 -RPMIdentity: de93c7c811843384d73c9d86a388c8e16fc9745cbb5f24d507043c779fc3f6682b107e3bb2fdf37ffd99376f8b9c68f4772891e26beab54aec102122e7c807d6 +RPMIdentity: 3da4a6588d41db443dfebd6e49ee07a2500ea71115b40a87a45615b10904ca42acbcea94308694086ee013d16eac5d03434575b59abdcc445514f2bcef442111 --- linuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm.repo 2023-10-13 10:18:12.000000000 +0000 +++ linuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm.hasher 2023-11-11 07:29:12.322266683 +0000 @@ -2836,3 +2836,3 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 750071db2b78d3fac550862e05b7350c +File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root a8de5a838ec34ebebb6f30d88b604db4 File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.comp 100644 root:root 36db960cdfb47870d04dc0825e67fbe5 @@ -2847,3 +2847,3 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 13b95aa4a20b0b0e898d18d597e7420e +File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root a6df876f8d1a3c804cfbc5b658f385b0 File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.comp 100644 root:root 59df738983b6701d52519fdd79609b2f @@ -2894,127 +2894,127 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs.c 100644 root:root 447cca3d73c7705b4f4264c20ececb0a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs_s32.c 100644 root:root b424b8e6fdf5d804523d9a892153b010 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/and2.c 100644 root:root c1f13f10a729d5a6ef943377944f507f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/anglejog.c 100644 root:root 76c8f0f0e033e8f0518b97b1c7da9e22 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/axistest.c 100644 root:root 9e4b783e400607dfa81902469a1fc266 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bin2gray.c 100644 root:root 3a5e70831161eb6c4bf73ed71535fd8d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/biquad.c 100644 root:root 0b03897868c5c378955048888b0c4ec2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitslice.c 100644 root:root a3f1fc897cc7fe59d46c8caff5771130 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitwise.c 100644 root:root f25553b3a06467efb315fb1d6b8ef5c7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bldc.c 100644 root:root 5f5442e622663e5f3b8297f0c9bd510b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/blend.c 100644 root:root 99bfa8aa643d68cdc40ba953dc767bee -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/carousel.c 100644 root:root 19e9c030ac72fc3146bc381363b6eb24 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/charge_pump.c 100644 root:root 4d3d6c87d7b2dba97a128966f716944c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke2.c 100644 root:root 364ca4cf17b56c411aa9b802c75addf6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke3.c 100644 root:root 3e3df8f14f134c6c4ea5f4e5fcf04f8b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarkeinv.c 100644 root:root 74078c9cd212b06764e7ab1e02e1a2be -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/comp.c 100644 root:root e2d785ca75a164cca13039bd815693a3 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/constant.c 100644 root:root fb5354f370d7a7d8290e45168a1a0bfb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_float.c 100644 root:root e5fba593c98b2dfea4f144c8c897b468 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_s32.c 100644 root:root 09ee38782fb7740eae00677e74684a7a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_u32.c 100644 root:root 8c4c7e6b65d45644dfc17cbaca5de92a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_s32.c 100644 root:root 2ac088b0b6e57143ee7817d45299e479 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_u32.c 100644 root:root 992b3ef4455e0fe7e07e565ea74ea7e8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_bit.c 100644 root:root 38841c82c388dae5f1f9451907da8b68 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_float.c 100644 root:root 37771b4d24f191ba2f3dd4dd7773d6f8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_u32.c 100644 root:root 39f37b4f2ee00f123cdf6de45d1be6b6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_bit.c 100644 root:root 995ff110048b0a18db78980520d5ba00 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_float.c 100644 root:root 58fadd3f915cfe3ca247230c65a0261f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_s32.c 100644 root:root 14a95a56d6b6e7c55e050b85803c52c9 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/corexy_by_hal.c 100644 root:root 09408f64fd458086b36424744396640e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/dbounce.c 100644 root:root 4b3aa36a8c61fa76d55be9e0d25d13b8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ddt.c 100644 root:root 47cf56ed4505c7c3645d653bc6c688d8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/deadzone.c 100644 root:root f3e8821fd41e91d9397f2db446fc16c7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/demux.c 100644 root:root bccbf990203bb91ab7d6d2505699158b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/differential.c 100644 root:root 9fc36be97383973b9ae4a1d780645424 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/div2.c 100644 root:root 3ca334ee9eb7d8a4b4df224e053465a2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/edge.c 100644 root:root fe8a0e13a834b5a15b4db3b00acba7fd -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/eoffset_per_angle.c 100644 root:root d60ec8ba61fa4888eb76c6ed2f0d05c7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/estop_latch.c 100644 root:root 042069c995d4a0d79a0b921e3e8fcc72 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/feedcomp.c 100644 root:root 51ca0619d4e2ba25ac1ad929c722088d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/filter_kalman.c 100644 root:root c33ec72c41047ce46f478baa9a703d1f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/flipflop.c 100644 root:root b86f52377b19796d825dc2473380fa1d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gantry.c 100644 root:root 1bd361cf52b8efa21494f6b8ad842395 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gearchange.c 100644 root:root 3392239f113c31c57519273b5c73553e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gray2bin.c 100644 root:root a39b50f41d9cc4697bad97b2b305d9c2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/histobins.c 100644 root:root 83674e62f0326f8b34006cc175a5f404 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/homecomp.c 100644 root:root 10e668b38ed354c3a12f7c1888e30f8f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/hypot.c 100644 root:root bdd3d99bfa4e8ed70f2d1ea04ef228e6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ilowpass.c 100644 root:root 159d99909e6eb40d66c72bbaf8d2492e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/integ.c 100644 root:root ef24dbd06253d45ff6cf7782143e6cc1 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/invert.c 100644 root:root 4ea0643b46e43d4b6e9b37e9bb6a653a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/joyhandle.c 100644 root:root 7c509ef5072681265ae11d2bd5cfdef8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/knob2float.c 100644 root:root dec0c54e858e96aa30d3ae95dc6e8d3f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/latencybins.c 100644 root:root 48de995b9c5ddd147db9658321f15cdb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit1.c 100644 root:root 4c3e05c7c4c98a71d97630ccd4e2d718 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit2.c 100644 root:root e5a0d84666cfe49a77ed557d67d415df -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit3.c 100644 root:root 4188b41f21863bd8d3cb4e22648579db -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit_axis.c 100644 root:root 933c5eab9e151f8216260a322608a6da -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lincurve.c 100644 root:root ac467f92def2184d4629cf2099db9cbf -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/logic.c 100644 root:root bcc5e5316a2fb219ec44eca816444203 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lowpass.c 100644 root:root 2ebf29bdc8abca400a7fe981a8be8a32 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lut5.c 100644 root:root 1aca2c9d9e89a5a04e2131302821a5d8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/maj3.c 100644 root:root 275409e539af4100680d21888f5fd206 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/match8.c 100644 root:root ce7ca3c1e5ee3661178a0f5757a15e2c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/max31855.c 100644 root:root 9525d23b020b6b5b1af91475c7817a31 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 62a3bb6c12ecb9191b3fa2619403a2f9 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/message.c 100644 root:root 7344878077d0df78125d60fd2fcf5066 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/millturn.c 100644 root:root 366b13d106173d6f0a1cb4875350ae6c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/minmax.c 100644 root:root 5fd9c29a48025f3f5db6d33a2ee9cbe8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/moveoff.c 100644 root:root 90c3ef494e6dfd5de8950d800dc833be -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mult2.c 100644 root:root 2a289ce22fdec5f93fd238a1e6228801 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiclick.c 100644 root:root 6c0abefa7ead9b2c0765b10e384ce7a6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiswitch.c 100644 root:root 60f3d24d2efcff4c359557ac6832e761 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux16.c 100644 root:root 451fd92305701d1c620cfaee16b6a93b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux2.c 100644 root:root 6416f749fba5603031ac8a9ef396fc24 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux4.c 100644 root:root aea757d79141375951d738d7500046eb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux8.c 100644 root:root f7007ab41e84737db8c6b3739d451a5f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/near.c 100644 root:root e4c46b0d1cd9c863e3be4067a03d50fa -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/not.c 100644 root:root a7705dab9565ce652cea66572c181c2c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/offset.c 100644 root:root d50384b63fbf976d935e110376901272 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ohmic.c 100644 root:root a90098265a37b26a9fb8acf260dec110 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/oneshot.c 100644 root:root bb5ac73484f8f9518716b221ccfb8a60 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/or2.c 100644 root:root f68bdc39bff3495b01db5fcbc3ea5db9 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/orient.c 100644 root:root ce8c1e73c8e9bb7329d2ebaad378e41c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/plasmac.c 100644 root:root 16d5200bc8801420453a8b54866dd8c2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sample_hold.c 100644 root:root 496e49fd8b04c2e0d43552e7f65697d1 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scale.c 100644 root:root a54f2e8608785595a9ea505971fc8f66 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 41abb2a8017e3d114ff06c6926338e06 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/select8.c 100644 root:root fe17ee289380b4a102edd9c142cf9e80 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_axis_hardware.c 100644 root:root c76ab7867696d0db44cf6eb0bf6c5e9d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_home_switch.c 100644 root:root 7c126879601a389321fb6965b6e964fe -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 4ce5166aaf504445c4e427aa1c4e96ab -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_parport.c 100644 root:root d3763f98e7c7966ac839be4948b9ca4e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_spindle.c 100644 root:root cf3e8f3a7dcf3566545f886665c36877 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/simple_tp.c 100644 root:root 65c0112216fd0e9552bd0b650b891935 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sphereprobe.c 100644 root:root 0ad2ef4462911ba01a12c19775cb80dc -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle.c 100644 root:root 03150cddd4ef714f62799098132a9d20 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle_monitor.c 100644 root:root bbc344e7591975604752c9112772d40d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/steptest.c 100644 root:root 09a8edb3902927b8c24f091f4e91d145 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sum2.c 100644 root:root a76b2a49081ab3c95850e637d8845013 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thc.c 100644 root:root 30903fb6cb984cd8b1f3cbfa7b7a54f2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thcud.c 100644 root:root 0d919e245a61ee59c97bb81a36c30ef5 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/threadtest.c 100644 root:root dc6cc12fa7ed32a3e7f849e6873fa301 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/time.c 100644 root:root df71ee48ac6905026fd0ea51762762cb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelay.c 100644 root:root 16684d9a7b675d8177096f2659057b64 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelta.c 100644 root:root 79e2da4170e391727d253692df56e370 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tof.c 100644 root:root 4222b4184fc80049936cbc994f86e44e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle.c 100644 root:root 1c5905660cd7c45f738bd17ff045f7c6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle2nist.c 100644 root:root 13786a3930737f876a8d76abf6be2d2e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ton.c 100644 root:root 4fb027beee9b4cff41d2945227da798d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tp.c 100644 root:root 84832b862e378d236902ff8ccfde6226 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_bit.c 100644 root:root b8be5e57226c5fb4f1e06cadf3f08464 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_float.c 100644 root:root 7f49474ca3ccdb06b43ff8a8bc0e692b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/updown.c 100644 root:root 674f8686763265d20039160e21a5b428 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/userkins.c 100644 root:root bc24b5a19436ebcf165c24ee6f7b8b7b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/wcomp.c 100644 root:root ca0b5654943c05b2acd9e04e6c285b5a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xhc_hb04_util.c 100644 root:root fe2faa9e6488cb00d79fe725f9c55078 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xor2.c 100644 root:root 909bfd593cd5cada63e3f92da8f24265 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 8f3cd56341a61872295b094912231466 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs.c 100644 root:root e973a6941b2e6ff954b1186febd104e3 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs_s32.c 100644 root:root 2a87a4d073a02a2af78e36996ddb51bd +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/and2.c 100644 root:root 13f9e4dc21b3fc00954b6f8767f726aa +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/anglejog.c 100644 root:root 2179a290d86b9b462a8d1bb2fd513f3b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/axistest.c 100644 root:root dbc454ca52552eaea8423acc41efdb13 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bin2gray.c 100644 root:root 9fb2c5d1ce43c7b5d074e69758704eff +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/biquad.c 100644 root:root 8dfd1c45d5cb8587bbb6451f05cf0129 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitslice.c 100644 root:root e42073a885d3f7e89739ec93a70f778b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitwise.c 100644 root:root 130da8e836ce642b19c3779307039ef2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bldc.c 100644 root:root 73b8d4121d3fdc02781740d07a52e944 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/blend.c 100644 root:root 005198e030c45e34edcbfb6ba7e29587 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/carousel.c 100644 root:root b2c506ab2d2c6fedd441363c6c11ea96 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/charge_pump.c 100644 root:root fef06deca14ee7530ce21fbe503e6f65 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke2.c 100644 root:root b00dbe529d9f935ebf6404b531ba4a19 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke3.c 100644 root:root 24257dd437bd57755196f15c85ff62a0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarkeinv.c 100644 root:root 01ad60e945101e001a09045bc326da8d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/comp.c 100644 root:root e81d64e01c3094591deb690c9d43c046 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/constant.c 100644 root:root 87c5aecde9b08eccb6ce10fc7690d413 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_float.c 100644 root:root 6680333a43fcbdacf053c65a7d5c4000 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_s32.c 100644 root:root aacd8f3bfcb94e72ffe9f1f131b4acaf +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_u32.c 100644 root:root f5c686ba0f4b3f7d2c2f95fbb8752430 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_s32.c 100644 root:root f53ed0d83af851f5efcd0c4e9a0c5d24 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_u32.c 100644 root:root f9fdb72a7a27bd9a0d4de997ee9c4f75 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_bit.c 100644 root:root 2e26d259d6165325cfe769a624680e5d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_float.c 100644 root:root ff622673202d8a7af87ba0c19d7f3334 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_u32.c 100644 root:root 03b53df291649fe8fe5c78d381dcafc5 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_bit.c 100644 root:root 267a289f9c19d122fdc626a589310154 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_float.c 100644 root:root 7e72658ec6fed689540b3672c660359d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_s32.c 100644 root:root 3b5c9254f11d226e373bbdf08c05a41e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/corexy_by_hal.c 100644 root:root 0f5f8697453976703e0a3a747503513e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/dbounce.c 100644 root:root 88951ce1096966c95612a542646fa4d2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ddt.c 100644 root:root 3ca3bcd1db6349db43c0dd8fb0185423 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/deadzone.c 100644 root:root 4cf988f4fc715399344402b3bc61d64f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/demux.c 100644 root:root 6620c9141904c8d7d6483c17c74e2c7f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/differential.c 100644 root:root fb1b391231407e5eaae3f0068cf75fd2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/div2.c 100644 root:root 1efa27b4f19b36a23ac2fa35077a6ad9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/edge.c 100644 root:root 516ceb4bbd8a9b440bdb676e565a0b6d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/eoffset_per_angle.c 100644 root:root b4162b3207d2fb5635d884e8ac750947 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/estop_latch.c 100644 root:root 8c856267eb5de9b0cf126a129b1c4632 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/feedcomp.c 100644 root:root ea1e4dd53e4e782ff5c5bda818c0e988 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/filter_kalman.c 100644 root:root c2a9e5ad73c43c0f28c65a3b1081d851 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/flipflop.c 100644 root:root aff8bf64484e20520e47a05a0eaf3d28 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gantry.c 100644 root:root 8804f577386f5735bcffd6f5cd4ba272 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gearchange.c 100644 root:root 172a9de346c633a585a00ff55019c2b0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gray2bin.c 100644 root:root 61de78d260c89791c9edb1deebd90c53 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/histobins.c 100644 root:root 0db8c64f630093f0bef4094230e0acfe +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/homecomp.c 100644 root:root 6e85889c29921cb88be97176aad5bfba +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/hypot.c 100644 root:root 08f6a8144220c61b8c576187b1fa37bb +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ilowpass.c 100644 root:root 5a00df50450ebce67c4832f68711c465 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/integ.c 100644 root:root e6b225f61537554c573004adedc1526c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/invert.c 100644 root:root b32206994e80670edfb2e778ed3fd265 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/joyhandle.c 100644 root:root 2904946ec90c40069f4348101aa024b0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/knob2float.c 100644 root:root 5c3196cb1b889ad2f3971c0c0c5d2c32 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/latencybins.c 100644 root:root d62d211d76f5bc8907f05ff804c18837 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit1.c 100644 root:root 4cea920b5584233662a42fdb7c1a4f59 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit2.c 100644 root:root 9925f4560e79f21b375ee36be1c76706 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit3.c 100644 root:root 6fcd7bf2e7ec55cf43aafa47f64f04f8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit_axis.c 100644 root:root 1845ff47fd9285b793e6bdbabe520d61 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lincurve.c 100644 root:root 073de9096b7201e203bdac48b31b7652 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/logic.c 100644 root:root 60f0097c339fb1e9112000f24e57ef72 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lowpass.c 100644 root:root bb1347a35ae66a331e0e7de013b19398 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lut5.c 100644 root:root 68db327a529df5000245ac84d6151cdc +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/maj3.c 100644 root:root 4da276b67ff507ec0ebff3cdc8a4219b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/match8.c 100644 root:root 18615f227c132f36a474cf4a0168396d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/max31855.c 100644 root:root bfec432b9b518c20d97f0aba5ffba7fd +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root c5ea866eba0615febda43fce72c87284 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/message.c 100644 root:root 36a816be1f07bc28bea7fe5404beea11 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/millturn.c 100644 root:root fa8777513f7b37c15ada6b1d3988dded +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/minmax.c 100644 root:root b4b647484bae1c3cbfa7dde14301edfc +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/moveoff.c 100644 root:root ff0b95abb66da06196a9e496f33170d8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mult2.c 100644 root:root ce5c6a4a30d84d602bcd4f14e30c3fda +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiclick.c 100644 root:root 076c735e1bfaaf37b525e973faa39adf +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiswitch.c 100644 root:root 0825a01d1d443b8f3b380d65fd2933ef +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux16.c 100644 root:root b3994d03e92bd68087bc85e4b536217a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux2.c 100644 root:root 3f8e142376fcfd80d047af5026c8056c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux4.c 100644 root:root 5cf7173ca98c1e0a629ee84752d7f846 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux8.c 100644 root:root d7e0ae0c726db25f7e0bf533cb615c2e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/near.c 100644 root:root 4c3e25d3ab0e6f002ca5a7eff4b17a28 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/not.c 100644 root:root 3258a555df5a4b04fdf1db3947808d48 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/offset.c 100644 root:root 8281c408855a8379d1e122e62d765e2a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ohmic.c 100644 root:root 21df417db92bd4b190772223523d8d65 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/oneshot.c 100644 root:root b478eb70250b1d59757aa25e6b3d7e70 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/or2.c 100644 root:root 5a437ec6f310d2c191d30779cfbd4248 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/orient.c 100644 root:root bdf0143b6e5caa0bd78e31078b8f6d06 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/plasmac.c 100644 root:root c3576d5bea9fe03b2aedbe8240b0cd37 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sample_hold.c 100644 root:root 80a73a9cf71365d55361c82f11c9c85e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scale.c 100644 root:root a8841adb81727575926222d0841663bb +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scaled_s32_sums.c 100644 root:root de11d71a8c60f350e70ecde19ee9cfe4 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/select8.c 100644 root:root 10d3c6bac17a0a789682a3947ff39a9b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_axis_hardware.c 100644 root:root c0a7bb0dcbd64f8172902351b5c60d56 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_home_switch.c 100644 root:root 2ef22e746289998912d1b17a8c2618dc +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 7800cc26e7ab8d1481f73286bb505e6f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_parport.c 100644 root:root 7fb67c5ebfa378a47cd78deabfc0777d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_spindle.c 100644 root:root 61355059ef9ca03c492f535577605182 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/simple_tp.c 100644 root:root aee8b50726b3c22522c42cad4b6fcaf3 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sphereprobe.c 100644 root:root 0aa9e0e735e80e11d63a3159b002d667 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle.c 100644 root:root 476962605fcb6c4f04628e66a2342302 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle_monitor.c 100644 root:root 157968e1aefe0cdeccec9714f1578968 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/steptest.c 100644 root:root 8efa692868e48adf9adec2e227fb05a1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sum2.c 100644 root:root 6ab380442feefaa127e100aa25209141 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thc.c 100644 root:root 8e8bd8f51cb5b9a243c81b2bcdfe2662 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thcud.c 100644 root:root 6bc0f214bce9636f984c968f96fd9099 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/threadtest.c 100644 root:root c0aec2af0272de1cd42ba29466abb94a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/time.c 100644 root:root 055998aa5389629a479814c04ba43c97 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelay.c 100644 root:root 120fc9135332d3dbc4d854ce5684d9dc +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelta.c 100644 root:root 55a2aacddb1390e03a8546c5f96f6831 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tof.c 100644 root:root b8eecb8b378ff6faf1f8fe6cd6753576 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle.c 100644 root:root a245270e104447c1d3924f0b25c67201 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle2nist.c 100644 root:root f6058933d3a78e22242ce89fc853728e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ton.c 100644 root:root 1a48fb3a84259cc55afaf8b4677655a2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tp.c 100644 root:root 615f1df7106a2015c288aa9820af9d25 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_bit.c 100644 root:root c19f86e9219283e8cb67df3f0f6a79b4 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_float.c 100644 root:root d61319bf4db1793937ddd3e67e79e75d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/updown.c 100644 root:root 7a4f53363bda315c03031228eed0c87a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/userkins.c 100644 root:root f353ca09a7b674ae28610de92b908451 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/wcomp.c 100644 root:root c3bd1884506453e85b80b5450d72ebdf +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xhc_hb04_util.c 100644 root:root 046813caa0e09e90dbf7904cf8a80f72 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xor2.c 100644 root:root 4507c99b4e34108eac755213881f0773 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root f4f63d4f97bf7ceda9924f477e2b7bf5 File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_7i65.c 100644 root:root d68d67ada2ed76c0b86cb6dced14d967 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_uart.c 100644 root:root 1db89215039a89171690b56a15c5624e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/serport.c 100644 root:root 834f516cfb48b5a9c0a058a99c22abd0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 0c6c88bb6f99ba6bcac5f07236095e8e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_uart.c 100644 root:root 57f4a39919d0c89e03de57f67e8fd0cd +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/serport.c 100644 root:root a13ca6a612db47fd405bd551759cf9b8 File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps/thermistor.c 100644 root:root 599d78776b3b12bb606bd40530692e17 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps/thermistor.c 100644 root:root a9e4c0ea1c0fe59d1025e83608cc35ea File: /usr/src/debug/linuxcnc-2.9.1/src/rtapi 40755 root:root @@ -3029,2 +3029,2 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/rtapi/uspace_rtapi_string.c 100644 root:root e93709d53c7b25f0358ac01589652a43 -RPMIdentity: 903603d2cb8400f9c252b24579fafdaaba9fa43455ae3928ac2fc8e66e9e9eac2da2ab6a5d63eb5148f2dbfbcffe2d7a877bc9c695c224b7519afeb66c4d5f1e +RPMIdentity: 8bcd1b3fcb9f1d9dbd312957a60d1e8f92da74ff83c6bb15f3e330ba63ded340208d772605d789059ef1e4cdd97247ceaafb0d031189d22e59a17ec193b9e54f