<86>Nov 4 07:38:57 userdel[2674849]: delete user 'rooter' <86>Nov 4 07:38:57 userdel[2674849]: removed group 'rooter' owned by 'rooter' <86>Nov 4 07:38:57 userdel[2674849]: removed shadow group 'rooter' owned by 'rooter' <86>Nov 4 07:38:57 groupadd[2674858]: group added to /etc/group: name=rooter, GID=1856 <86>Nov 4 07:38:57 groupadd[2674858]: group added to /etc/gshadow: name=rooter <86>Nov 4 07:38:57 groupadd[2674858]: new group: name=rooter, GID=1856 <86>Nov 4 07:38:57 useradd[2674867]: new user: name=rooter, UID=1856, GID=1856, home=/root, shell=/bin/bash, from=none <86>Nov 4 07:38:57 userdel[2674880]: delete user 'builder' <86>Nov 4 07:38:57 userdel[2674880]: removed group 'builder' owned by 'builder' <86>Nov 4 07:38:57 userdel[2674880]: removed shadow group 'builder' owned by 'builder' <86>Nov 4 07:38:57 groupadd[2674890]: group added to /etc/group: name=builder, GID=1857 <86>Nov 4 07:38:57 groupadd[2674890]: group added to /etc/gshadow: name=builder <86>Nov 4 07:38:57 groupadd[2674890]: new group: name=builder, GID=1857 <86>Nov 4 07:38:57 useradd[2674897]: new user: name=builder, UID=1857, GID=1857, home=/usr/src, shell=/bin/bash, from=none <13>Nov 4 07:39:05 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432033 installed <13>Nov 4 07:39:05 rpmi: libgdbm-1.8.3-alt10 sisyphus+278100.1600.1.1 1626059138 installed <13>Nov 4 07:39:05 rpmi: libexpat-2.5.0-alt1 sisyphus+309227.100.1.1 1667075766 installed <13>Nov 4 07:39:05 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962878 installed <13>Nov 4 07:39:05 rpmi: libp11-kit-1:0.25.2-alt1 sisyphus+333434.100.1.1 1698941048 installed <13>Nov 4 07:39:05 rpmi: libtasn1-4.19.0-alt3 sisyphus+327816.100.1.1 1692802618 installed <13>Nov 4 07:39:05 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Nov 4 07:39:05 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Nov 4 07:39:05 rpmi: ca-certificates-2023.07.31-alt1 sisyphus+326137.200.1.1 1690809798 installed <13>Nov 4 07:39:05 rpmi: ca-trust-0.1.4-alt1 sisyphus+308690.100.1.1 1666182992 installed <13>Nov 4 07:39:05 rpmi: p11-kit-trust-1:0.25.2-alt1 sisyphus+333434.100.1.1 1698941048 installed <13>Nov 4 07:39:05 rpmi: libcrypto3-3.1.4-alt1 sisyphus+332632.100.2.1 1698241305 installed <13>Nov 4 07:39:05 rpmi: libssl3-3.1.4-alt1 sisyphus+332632.100.2.1 1698241305 installed <13>Nov 4 07:39:05 rpmi: python3-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 4 07:39:06 rpmi: python3-base-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 4 07:39:06 rpmi: python3-module-py3dephell-0.1.0-alt2 sisyphus+328191.600.5.1 1693609196 installed <13>Nov 4 07:39:06 rpmi: tests-for-installed-python3-pkgs-0.1.24-alt2 sisyphus+331059.100.4.1 1696870033 installed <13>Nov 4 07:39:06 rpmi: rpm-build-python3-0.1.24-alt2 sisyphus+331059.100.4.1 1696870033 installed <13>Nov 4 07:39:06 rpmi: rpm-build-tcl-0.6.2-alt1 sisyphus+299320.100.1.1 1651401392 installed <13>Nov 4 07:39:09 rpmi: xorg-proto-devel-2023.2-alt1.1 sisyphus+330960.100.2.1 1696609218 installed <13>Nov 4 07:39:09 rpmi: libjpeg-2:2.1.2-alt1.2 sisyphus+300827.100.2.1 1653916654 installed <13>Nov 4 07:39:09 rpmi: libpng16-1.6.40-alt1 sisyphus+323732.100.1.1 1687771859 installed <13>Nov 4 07:39:09 rpmi: libwayland-client-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 4 07:39:09 rpmi: libatk-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 4 07:39:09 rpmi: libglvnd-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 4 07:39:09 rpmi: libboost_system1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:09 rpmi: xml-utils-1:2.10.4-alt1 sisyphus+311250.4140.175.1 1685629210 installed <13>Nov 4 07:39:09 rpmi: liblcms2-2.15-alt1 sisyphus+316039.100.1.1 1677666336 installed <13>Nov 4 07:39:09 rpmi: perl-HTTP-Date-6.06-alt1 sisyphus+324527.100.1.1 1688834564 installed <13>Nov 4 07:39:09 rpmi: perl-XML-NamespaceSupport-1.12-alt1 1491296348 installed <13>Nov 4 07:39:09 rpmi: zlib-devel-1.2.13-alt1 sisyphus+309409.200.2.1 1667402045 installed <13>Nov 4 07:39:09 rpmi: python3-module-pkg_resources-1:68.2.2-alt1 sisyphus+329927.100.2.1 1695208272 installed <13>Nov 4 07:39:09 rpmi: libtcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Nov 4 07:39:09 rpmi: tcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Nov 4 07:39:09 rpmi: libwebp7-1.3.2-alt1 sisyphus+329541.100.1.1 1694676226 installed <13>Nov 4 07:39:09 rpmi: libICE-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Nov 4 07:39:09 rpmi: libfribidi-1.0.13-alt1 sisyphus+320646.100.1.1 1684307083 installed <13>Nov 4 07:39:09 rpmi: libSM-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Nov 4 07:39:09 rpmi: rpm-build-gir-0.7.3-alt3.1 sisyphus+319393.100.1.1 1682538783 installed <13>Nov 4 07:39:09 rpmi: libepoxy-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Nov 4 07:39:09 rpmi: libusb-1.0.26-alt2 sisyphus+305525.100.1.1 1660924428 installed <13>Nov 4 07:39:09 rpmi: libopenblas-0.3.23-alt1.2 sisyphus+325749.100.1.1 1690531820 installed <13>Nov 4 07:39:09 rpmi: libwayland-server-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 4 07:39:09 rpmi: perl-LWP-MediaTypes-6.04-alt1 sisyphus+225468.100.1.1 1553186684 installed <13>Nov 4 07:39:09 rpmi: perl-Compress-Raw-Zlib-2.206-alt1 sisyphus+325780.100.1.1 1690558898 installed <13>Nov 4 07:39:09 rpmi: perl-libnet-1:3.15-alt1 sisyphus+317310.100.1.1 1679580208 installed <13>Nov 4 07:39:09 rpmi: perl-XML-SAX-Base-1.09-alt1 1494364363 installed <13>Nov 4 07:39:09 rpmi: gtk-builder-convert-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Nov 4 07:39:10 rpmi: python3-module-Pygments-2.16.1-alt1 sisyphus+326610.100.1.1 1691406169 installed <13>Nov 4 07:39:10 rpmi: libsqlite3-3.42.0-alt1 sisyphus+321513.100.1.1 1684603061 installed <13>Nov 4 07:39:10 rpmi: libnspr-1:4.35-alt1 sisyphus+308164.100.1.1 1665397042 installed <13>Nov 4 07:39:10 rpmi: libicu73-1:7.3.2-alt1.1 sisyphus+333271.100.1.1 1698773686 installed <13>Nov 4 07:39:10 rpmi: libkmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Nov 4 07:39:10 rpmi: libquadmath0-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 4 07:39:10 rpmi: libgomp1-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 4 07:39:10 rpmi: libltdl7-2.4.7-alt4 sisyphus+333358.100.1.1 1698858596 installed <13>Nov 4 07:39:10 rpmi: libopenjpeg2.0-2.5.0-alt1 sisyphus+299926.300.3.1 1652478844 installed <13>Nov 4 07:39:10 rpmi: libverto-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Nov 4 07:39:10 rpmi: libcom_err-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Nov 4 07:39:10 rpmi: libgraphite2-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Nov 4 07:39:10 rpmi: libXau-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Nov 4 07:39:10 rpmi: libXau-devel-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Nov 4 07:39:10 rpmi: libgraphite2-devel-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Nov 4 07:39:10 rpmi: libcom_err-devel-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Nov 4 07:39:10 rpmi: libverto-devel-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Nov 4 07:39:10 rpmi: libraw-0.21.1-alt1 sisyphus+314571.100.5.1 1693994530 installed <13>Nov 4 07:39:10 rpmi: libquadmath13-devel-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 4 07:39:10 rpmi: libquadmath-devel-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Nov 4 07:39:10 rpmi: libgfortran5-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 4 07:39:10 rpmi: kmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Nov 4 07:39:10 rpmi: icu-utils-1:7.3.2-alt1.1 sisyphus+333271.100.1.1 1698773686 installed <13>Nov 4 07:39:10 rpmi: libicu-devel-1:7.3.2-alt1.1 sisyphus+333271.100.1.1 1698773686 installed <13>Nov 4 07:39:11 rpmi: libnss-3.94.0-alt1 sisyphus+330862.100.1.2 1696335687 installed <13>Nov 4 07:39:11 rpmi: python3-module-nss-1.0.1-alt6 sisyphus+311250.15200.175.1 1685633048 installed <13>Nov 4 07:39:11 rpmi: libICE-devel-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Nov 4 07:39:11 rpmi: libSM-devel-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Nov 4 07:39:11 rpmi: tcl-devel-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Nov 4 07:39:11 rpmi: libpng-devel-1.6.40-alt1 sisyphus+323732.100.1.1 1687771859 installed <13>Nov 4 07:39:11 rpmi: perl-File-Listing-6.16-alt1 sisyphus+325783.100.1.1 1690559356 installed <13>Nov 4 07:39:11 rpmi: libboost_atomic1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libboost_contract1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libboost_chrono1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libboost_timer1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libboost_thread1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libboost_type_erasure1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libOpenGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 4 07:39:11 rpmi: libGLES-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 4 07:39:11 rpmi: libwayland-cursor-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 4 07:39:11 rpmi: libwayland-egl-4:18.1.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 4 07:39:11 rpmi: groff-base-1.22.3-alt2 sisyphus+275306.100.2.1 1624538359 installed <13>Nov 4 07:39:11 rpmi: libpipeline-1.5.7-alt1_1 sisyphus+312433.100.1.1 1671879776 installed <13>Nov 4 07:39:11 rpmi: libmodbus-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Nov 4 07:39:11 rpmi: openldap-common-2.6.6-alt1 sisyphus+330946.100.2.1 1696432854 installed <13>Nov 4 07:39:11 rpmi: wayland-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 4 07:39:11 rpmi: libwayland-client-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Nov 4 07:39:11 rpmi: libxkbcommon-1.6.0-alt1 sisyphus+331300.100.1.1 1696855236 installed <13>Nov 4 07:39:11 rpmi: libgudev-1:238-alt1 sisyphus+324364.100.1.1 1688646145 installed <13>Nov 4 07:39:11 rpmi: libboost_python3-1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libxblas-1.0.248-alt2 sisyphus+285045.40.2.1 1631388462 installed <13>Nov 4 07:39:11 rpmi: liblapack-1:3.8.0-alt7 sisyphus+293726.100.1.1 1642544503 installed <13>Nov 4 07:39:11 rpmi: python3-module-numpy-1:1.25.2-alt1 sisyphus+326215.100.2.1 1691052232 installed <13>Nov 4 07:39:11 rpmi: libboost_numpy3-1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:11 rpmi: libxshmfence-1.3.2-alt1 sisyphus+311428.400.1.1 1670577529 installed <13>Nov 4 07:39:11 rpmi: libpciaccess-1:0.17-alt1 sisyphus+308663.300.1.1 1666168262 installed <13>Nov 4 07:39:11 rpmi: libdrm-1:2.4.117-alt1 sisyphus+332488.100.1.1 1698045111 installed <13>Nov 4 07:39:11 rpmi: less-633-alt1 sisyphus+328181.300.2.1 1693321749 installed <13>Nov 4 07:39:11 rpmi: perl-Try-Tiny-0.31-alt1 sisyphus+290597.100.1.1 1637915507 installed <13>Nov 4 07:39:11 rpmi: perl-IO-Socket-IP-0.42-alt1 sisyphus+325815.100.1.2 1690571193 installed <13>Nov 4 07:39:11 rpmi: perl-Module-Load-0.36-alt1 sisyphus+258992.100.1.1 1601543407 installed <13>Nov 4 07:39:11 rpmi: perl-Compress-Raw-Bzip2-2.206-alt1 sisyphus+325779.100.1.1 1690558767 installed <13>Nov 4 07:39:11 rpmi: perl-IO-Compress-Brotli-2:0.004001-alt3 sisyphus+302124.100.1.1 1655283098 installed <13>Nov 4 07:39:11 rpmi: perl-Clone-0.46-alt1 sisyphus+308850.100.1.3 1666451819 installed <13>Nov 4 07:39:11 rpmi: perl-HTML-Tagset-3.20-alt2 1317725093 installed <13>Nov 4 07:39:11 rpmi: perl-Term-ANSIColor-5.01-alt1 sisyphus+244783.100.1.2 1579747505 installed <13>Nov 4 07:39:11 rpmi: perl-Data-Dump-1.25-alt1 sisyphus+276551.100.1.1 1625126880 installed <13>Nov 4 07:39:11 rpmi: perl-Filter-1.64-alt1 sisyphus+305464.100.1.1 1660815328 installed <13>Nov 4 07:39:11 rpmi: perl-Encode-3.19-alt1 sisyphus+304776.100.1.1 1659623414 installed <13>Nov 4 07:39:11 rpmi: perl-URI-5.21-alt1 sisyphus+327918.100.1.1 1692972838 installed <13>Nov 4 07:39:11 rpmi: perl-IO-Compress-2.206-alt1 sisyphus+325819.100.1.1 1690563199 installed <13>Nov 4 07:39:11 rpmi: perl-Net-HTTP-6.23-alt1 sisyphus+323470.100.1.1 1687422469 installed <13>Nov 4 07:39:11 rpmi: perl-HTML-Parser-3.81-alt1 sisyphus+314462.100.1.1 1675193797 installed <13>Nov 4 07:39:11 rpmi: perl-WWW-RobotRules-6.02-alt1 1329756211 installed <13>Nov 4 07:39:11 rpmi: perl-Encode-Locale-1.05-alt1 1444608613 installed <13>Nov 4 07:39:11 rpmi: perl-IO-HTML-1.004-alt1 sisyphus+258983.100.1.1 1601542619 installed <13>Nov 4 07:39:11 rpmi: perl-HTTP-Message-6.45-alt1 sisyphus+330728.100.1.1 1696162276 installed <13>Nov 4 07:39:11 rpmi: perl-HTTP-Negotiate-6.01-alt1 1329760563 installed <13>Nov 4 07:39:11 rpmi: perl-libwww-6.72-alt1 sisyphus+325791.100.1.2 1690563984 installed <13>Nov 4 07:39:11 rpmi: perl-XML-LibXML-2.0209-alt1 sisyphus+325808.100.1.2 1690570830 installed <13>Nov 4 07:39:11 rpmi: perl-XML-SAX-1.02-alt1 sisyphus+232322.100.1.1 1560758406 installed <13>Nov 4 07:39:11 rpmi: perl-XML-Simple-2.25-alt2 sisyphus+257498.100.1.1 1599324034 installed <13>Nov 4 07:39:11 rpmi: icon-naming-utils-0.8.90-alt1 sisyphus+276851.100.1.1 1625243947 installed <13>Nov 4 07:39:12 rpmi: icon-theme-adwaita-45.0-alt1 sisyphus+325066.500.6.2 1695203960 installed <13>Nov 4 07:39:12 rpmi: perl-XML-Parser-2.46-alt1 sisyphus+279723.1300.1.1 1626649160 installed <13>Nov 4 07:39:12 rpmi: usbids-20230825-alt1 sisyphus+327952.100.1.1 1693025831 installed <13>Nov 4 07:39:12 rpmi: pciids-20230922-alt1 sisyphus+330116.100.1.1 1695424341 installed <13>Nov 4 07:39:12 rpmi: hwdata-0.374-alt1 sisyphus+329322.100.1.1 1694450297 installed <13>Nov 4 07:39:12 rpmi: gtk+3-themes-incompatible-3.20-alt3 1461944560 installed <13>Nov 4 07:39:12 rpmi: python3-module-zipp-3.17.0-alt1 sisyphus+330459.100.2.1 1695891920 installed <13>Nov 4 07:39:12 rpmi: python3-module-importlib-metadata-6.8.0-alt1 sisyphus+325197.100.2.1 1689870041 installed <13>Nov 4 07:39:12 rpmi: python3-module-markdown-3.5.1-alt1 sisyphus+333338.100.3.1 1698863238 installed <13>Nov 4 07:39:12 rpmi: python3-module-polib-1.1.1-alt1 sisyphus+282657.100.1.1 1628954165 installed <13>Nov 4 07:39:12 rpmi: python3-module-click-8.1.7-alt1 sisyphus+327424.100.2.1 1695395098 installed <13>Nov 4 07:39:12 rpmi: python3-module-zope.interface-6.0-alt1 sisyphus+326348.600.4.1 1691597456 installed <13>Nov 4 07:39:12 rpmi: python3-module-chameleon.core-4.2.0-alt1 sisyphus+330407.100.1.1 1695735099 installed <13>Nov 4 07:39:12 rpmi: python3-module-lingua-4.15.0-alt2 sisyphus+304052.100.1.1 1658352892 installed <13>Nov 4 07:39:12 rpmi: python3-module-babel-1:2.12.1-alt1 sisyphus+317409.100.1.1 1679678193 installed <13>Nov 4 07:39:12 rpmi: python3-module-markupsafe-1:2.1.3-alt1 sisyphus+323659.100.1.1 1687595160 installed <13>Nov 4 07:39:12 rpmi: python3-module-pycparser-2.21-alt1.1 sisyphus+309935.7300.4.1 1668527005 installed <13>Nov 4 07:39:12 rpmi: python3-module-cffi-1.16.0-alt1 sisyphus+330935.100.2.1 1696495706 installed <13>Nov 4 07:39:12 rpmi: python3-module-cryptography-41.0.5-alt1 sisyphus+333239.200.1.1 1698754471 installed <13>Nov 4 07:39:12 rpmi: python3-module-beaker-1.12.1-alt1 sisyphus+319143.100.1.1 1682256768 installed <13>Nov 4 07:39:12 rpmi: python3-module-mako-1.2.4-alt2 sisyphus+319351.100.1.1 1682510722 installed <13>Nov 4 07:39:13 rpmi: libffi-devel-1:3.4.2-alt2 sisyphus+287629.100.2.1 1634659534 installed <13>Nov 4 07:39:13 rpmi: gcc-c++-common-1.4.27-alt1 sisyphus+278099.1300.1.1 1626028636 installed <13>Nov 4 07:39:13 rpmi: libstdc++13-devel-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 4 07:39:13 rpmi: gcc13-c++-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Nov 4 07:39:14 rpmi: libpython3-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 4 07:39:14 rpmi: libncurses6-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Nov 4 07:39:14 rpmi: libtinfo-devel-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Nov 4 07:39:14 rpmi: libncurses-devel-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Nov 4 07:39:14 rpmi: python3-dev-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 4 07:39:14 rpmi: python3-module-setuptools-1:68.2.2-alt1 sisyphus+329927.100.2.1 1695208272 installed <13>Nov 4 07:39:14 rpmi: glib2-devel-2.78.1-alt1 sisyphus+332710.100.1.2 1698249935 installed <13>Nov 4 07:39:14 rpmi: libatk-devel-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 4 07:39:15 rpmi: libdevmapper-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>Nov 4 07:39:15 rpmi: mount-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <13>Nov 4 07:39:15 rpmi: losetup-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <13>Nov 4 07:39:15 rpmi: lsblk-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <86>Nov 4 07:39:15 groupadd[2708577]: group added to /etc/group: name=tape, GID=999 <86>Nov 4 07:39:15 groupadd[2708577]: group added to /etc/gshadow: name=tape <86>Nov 4 07:39:15 groupadd[2708577]: new group: name=tape, GID=999 <86>Nov 4 07:39:15 groupadd[2708596]: group added to /etc/group: name=dialout, GID=998 <86>Nov 4 07:39:15 groupadd[2708596]: group added to /etc/gshadow: name=dialout <86>Nov 4 07:39:15 groupadd[2708596]: new group: name=dialout, GID=998 <86>Nov 4 07:39:15 groupadd[2708611]: group added to /etc/group: name=input, GID=997 <86>Nov 4 07:39:15 groupadd[2708611]: group added to /etc/gshadow: name=input <86>Nov 4 07:39:15 groupadd[2708611]: new group: name=input, GID=997 <86>Nov 4 07:39:15 groupadd[2708634]: group added to /etc/group: name=video, GID=996 <86>Nov 4 07:39:15 groupadd[2708634]: group added to /etc/gshadow: name=video <86>Nov 4 07:39:15 groupadd[2708634]: new group: name=video, GID=996 <86>Nov 4 07:39:15 groupadd[2708647]: group added to /etc/group: name=render, GID=995 <86>Nov 4 07:39:15 groupadd[2708647]: group added to /etc/gshadow: name=render <86>Nov 4 07:39:15 groupadd[2708647]: new group: name=render, GID=995 <86>Nov 4 07:39:15 groupadd[2708660]: group added to /etc/group: name=sgx, GID=994 <86>Nov 4 07:39:15 groupadd[2708660]: group added to /etc/gshadow: name=sgx <86>Nov 4 07:39:15 groupadd[2708660]: new group: name=sgx, GID=994 <13>Nov 4 07:39:15 rpmi: udev-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Nov 4 07:39:15 rpmi: dmsetup-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>Nov 4 07:39:15 rpmi: dconf-profile-0.1-alt1 sisyphus+325633.340.3.1 1690415358 installed <13>Nov 4 07:39:15 rpmi: boost-python-headers-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_context1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_fiber1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_stacktrace1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_nowide1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_url1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_test1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_serialization1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_random1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_iostreams1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_json1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_regex1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_graph1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_date_time1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:15 rpmi: libboost_container1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:17 rpmi: boost-devel-headers-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696508918 installed <13>Nov 4 07:39:17 rpmi: boost-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:17 rpmi: libgc-8.2.4-alt2 sisyphus+322425.100.2.1 1686551121 installed <13>Nov 4 07:39:17 rpmi: libmaa-1.4.7-alt5 sisyphus+310700.100.1.1 1669563759 installed <13>Nov 4 07:39:17 rpmi: dict-1:1.13.1-alt1 sisyphus+290985.100.1.1 1638223911 installed <13>Nov 4 07:39:17 rpmi: w3m-0.5.3-alt4.git20200502 sisyphus+328124.5000.1.1 1693253320 installed <13>Nov 4 07:39:17 rpmi: sgml-common-0.6.3-alt15 sisyphus+276099.100.1.1 1624817971 installed <13>Nov 4 07:39:17 rpmi: docbook-dtds-4.5-alt1 sisyphus+276837.100.1.1 1625242123 installed <13>Nov 4 07:39:17 rpmi: docbook-style-xsl-1.79.1-alt4 sisyphus+232871.100.1.1 1561238010 installed <13>Nov 4 07:39:17 rpmi: libxslt-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Nov 4 07:39:17 rpmi: xsltproc-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Nov 4 07:39:17 rpmi: asciidoc-9.1.0-alt2 sisyphus+282906.100.1.1 1629104440 installed <13>Nov 4 07:39:17 rpmi: libImageMagick7-common-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Nov 4 07:39:17 rpmi: libwmflite-0.2.8.4-alt13 sisyphus+275127.100.1.1 1624406848 installed <13>Nov 4 07:39:17 rpmi: liblqr-0.4.2-alt1 sisyphus+276247.100.1.2 1624927462 installed <13>Nov 4 07:39:17 rpmi: libjbig2.1-2.1-alt2 sisyphus+326386.40.6.1 1691148232 installed <13>Nov 4 07:39:17 rpmi: djvu-common-3.5.28-alt2 sisyphus+297715.100.1.1 1648887081 installed <13>Nov 4 07:39:17 rpmi: libdjvu-3.5.28-alt2 sisyphus+297715.100.1.1 1648887083 installed <13>Nov 4 07:39:17 rpmi: libgts-0.7.6-alt2.drc20130205.1 sisyphus+275722.100.1.1 1624749871 installed <13>Nov 4 07:39:17 rpmi: libpaper-1.1.28-alt4 sisyphus+325501.100.1.1 1690226536 installed <13>Nov 4 07:39:17 rpmi: liblmdb-0.9.31-alt1 sisyphus+330946.40.2.1 1696431544 installed <13>Nov 4 07:39:17 rpmi: libkeyutils-1.6.3-alt1 sisyphus+266061.100.1.1 1612919567 installed <86>Nov 4 07:39:17 groupadd[2711245]: group added to /etc/group: name=_keytab, GID=993 <86>Nov 4 07:39:17 groupadd[2711245]: group added to /etc/gshadow: name=_keytab <86>Nov 4 07:39:17 groupadd[2711245]: new group: name=_keytab, GID=993 <13>Nov 4 07:39:17 rpmi: libkrb5-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <86>Nov 4 07:39:17 groupadd[2711361]: group added to /etc/group: name=sasl, GID=992 <86>Nov 4 07:39:17 groupadd[2711361]: group added to /etc/gshadow: name=sasl <86>Nov 4 07:39:17 groupadd[2711361]: new group: name=sasl, GID=992 <13>Nov 4 07:39:17 rpmi: libsasl2-3-2.1.27-alt2.2 sisyphus+324359.6000.12.1 1689392231 installed <13>Nov 4 07:39:17 rpmi: libldap2-2.6.6-alt1 sisyphus+330946.100.2.1 1696432858 installed <13>Nov 4 07:39:17 rpmi: libkrb5-ldap-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <13>Nov 4 07:39:17 rpmi: libkrb5-devel-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <13>Nov 4 07:39:17 rpmi: libtirpc-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Nov 4 07:39:17 rpmi: liblz4-1:1.9.4-alt1 sisyphus+309416.100.1.1 1667413000 installed <13>Nov 4 07:39:17 rpmi: libsystemd-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Nov 4 07:39:17 rpmi: libdbus-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <13>Nov 4 07:39:17 rpmi: libavahi-0.8-alt2 sisyphus+321176.300.10.2 1684803998 installed <13>Nov 4 07:39:17 rpmi: libcups-2.4.7-alt2 sisyphus+333092.100.1.1 1698654164 installed <13>Nov 4 07:39:17 rpmi: dbus-tools-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <86>Nov 4 07:39:17 groupadd[2711954]: group added to /etc/group: name=messagebus, GID=991 <86>Nov 4 07:39:17 groupadd[2711954]: group added to /etc/gshadow: name=messagebus <86>Nov 4 07:39:17 groupadd[2711954]: new group: name=messagebus, GID=991 <86>Nov 4 07:39:17 useradd[2711997]: new user: name=messagebus, UID=999, GID=991, home=/run/dbus, shell=/dev/null, from=none <13>Nov 4 07:39:17 rpmi: dbus-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <13>Nov 4 07:39:17 rpmi: icon-theme-hicolor-0.17-alt2 sisyphus+248343.100.1.1 1584979043 installed <13>Nov 4 07:39:17 rpmi: libgtk+2-locales-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Nov 4 07:39:17 rpmi: libnuma-2.0.14-alt2 sisyphus+278485.100.1.1 1626104243 installed <13>Nov 4 07:39:17 rpmi: libx265-199-3.5-alt1.1 sisyphus+277560.100.1.1 1625696944 installed <13>Nov 4 07:39:17 rpmi: libdeflate-1.19-alt1 sisyphus+329822.100.2.2 1695269332 installed <13>Nov 4 07:39:17 rpmi: libtiff5-4.4.0-alt4 sisyphus+322581.100.1.2 1686180093 installed <13>Nov 4 07:39:18 rpmi: libgdk-pixbuf-locales-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Nov 4 07:39:18 rpmi: libde265-1.0.12-alt1 sisyphus+329539.100.1.1 1694672072 installed <13>Nov 4 07:39:18 rpmi: libaom3-3.5.0-alt1 sisyphus+312085.100.1.1 1671551781 installed <13>Nov 4 07:39:18 rpmi: libdatrie-0.2.13-alt1_7 sisyphus+328221.100.1.1 1693336967 installed <13>Nov 4 07:39:18 rpmi: libthai-0.1.29-alt1_6 sisyphus+328230.100.1.2 1693348044 installed <13>Nov 4 07:39:18 rpmi: desktop-file-utils-0.26-alt6 sisyphus+331944.100.1.3 1697550035 installed <13>Nov 4 07:39:18 rpmi: shared-mime-info-2.3-alt1 sisyphus+331248.100.1.1 1696723964 installed <13>Nov 4 07:39:18 rpmi: gsettings-desktop-schemas-data-45.0-alt1 sisyphus+325066.400.6.2 1695203930 installed <13>Nov 4 07:39:18 rpmi: libgio-2.78.1-alt1 sisyphus+332710.100.1.2 1698249935 installed <13>Nov 4 07:39:18 rpmi: gsettings-desktop-schemas-45.0-alt1 sisyphus+325066.400.6.2 1695203930 installed <13>Nov 4 07:39:18 rpmi: libgdk-pixbuf-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Nov 4 07:39:18 rpmi: gobject-introspection-1.78.1-alt1.3 sisyphus+331651.500.5.1 1698260136 installed <13>Nov 4 07:39:18 rpmi: libgio-devel-2.78.1-alt1 sisyphus+332710.100.1.2 1698249935 installed <13>Nov 4 07:39:18 rpmi: libgdk-pixbuf-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Nov 4 07:39:18 rpmi: gobject-introspection-x11-1.78.1-alt1.3 sisyphus+331651.500.5.1 1698260136 installed <13>Nov 4 07:39:18 rpmi: gobject-introspection-devel-1.78.1-alt1.3 sisyphus+331651.500.5.1 1698260136 installed <13>Nov 4 07:39:18 rpmi: libatk-gir-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 4 07:39:18 rpmi: libgdk-pixbuf-gir-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Nov 4 07:39:18 rpmi: libheif-1.17.1-alt1 sisyphus+332223.100.1.1 1697782070 installed <13>Nov 4 07:39:18 rpmi: gtk4-update-icon-cache-4.12.3-alt1 sisyphus+330542.100.1.1 1695913166 installed <13>Nov 4 07:39:18 rpmi: libgdk-pixbuf-gir-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Nov 4 07:39:18 rpmi: libatk-gir-devel-2.50.0-alt1 sisyphus+329802.300.1.1 1694991397 installed <13>Nov 4 07:39:18 rpmi: libdconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Nov 4 07:39:18 rpmi: dconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Nov 4 07:39:18 rpmi: libgtk+3-schemas-3.24.38-alt1 sisyphus+321614.100.1.1 1684749819 installed <13>Nov 4 07:39:18 rpmi: libjson-glib-1.8.0-alt1 sisyphus+325066.600.6.2 1695204016 installed <13>Nov 4 07:39:18 rpmi: libgusb-0.4.7-alt1 sisyphus+331336.100.1.1 1696933625 installed <13>Nov 4 07:39:18 rpmi: libcolord-1.4.6-alt1 sisyphus+296000.100.1.1 1646050423 installed <13>Nov 4 07:39:18 rpmi: libpolkit-0.120-alt1.qa2 sisyphus+296007.100.1.1 1646053433 installed <86>Nov 4 07:39:18 groupadd[2714382]: group added to /etc/group: name=colord, GID=990 <86>Nov 4 07:39:18 groupadd[2714382]: group added to /etc/gshadow: name=colord <86>Nov 4 07:39:18 groupadd[2714382]: new group: name=colord, GID=990 <86>Nov 4 07:39:18 useradd[2714407]: new user: name=colord, UID=998, GID=990, home=/var/colord, shell=/dev/null, from=none <13>Nov 4 07:39:18 rpmi: colord-1.4.6-alt1 sisyphus+296000.100.1.1 1646050423 installed <13>Nov 4 07:39:18 rpmi: libpixman-3:0.42.2-alt1 sisyphus+309549.100.1.1 1667649379 installed <13>Nov 4 07:39:18 rpmi: libbrotlicommon-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Nov 4 07:39:18 rpmi: libbrotlidec-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Nov 4 07:39:18 rpmi: libharfbuzz-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 4 07:39:18 rpmi: libfreetype-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Nov 4 07:39:18 rpmi: libfontconfig1-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Nov 4 07:39:18 rpmi: libharfbuzz-gobject-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 4 07:39:18 rpmi: libharfbuzz-gir-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 4 07:39:19 rpmi: libgs-10.01.1-alt1 sisyphus+318450.100.1.1 1681389085 installed <13>Nov 4 07:39:19 rpmi: fontconfig-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed Updating fonts cache: <29>Nov 4 07:39:20 fontconfig: Updating fonts cache: succeeded [ DONE ] <13>Nov 4 07:39:20 rpmi: libraqm-0.7.1-alt1 sisyphus+279320.100.1.2 1626503405 installed <13>Nov 4 07:39:20 rpmi: libharfbuzz-icu-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 4 07:39:20 rpmi: libX11-locales-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400315 installed <13>Nov 4 07:39:20 rpmi: libXdmcp-1.1.4-alt1 sisyphus+311188.1000.1.1 1670233860 installed <13>Nov 4 07:39:20 rpmi: libxcb-1.16-alt1 sisyphus+327325.200.1.1 1692276267 installed <13>Nov 4 07:39:20 rpmi: libX11-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400319 installed <13>Nov 4 07:39:20 rpmi: libXext-1.3.5-alt1 sisyphus+309285.100.1.1 1667212413 installed <13>Nov 4 07:39:20 rpmi: libXrender-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Nov 4 07:39:21 rpmi: libcairo-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 4 07:39:21 rpmi: libcairo-gobject-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 4 07:39:21 rpmi: libXt-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Nov 4 07:39:21 rpmi: libXfixes-6.0.1-alt1 sisyphus+331490.300.1.1 1697023235 installed <13>Nov 4 07:39:21 rpmi: libXft-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Nov 4 07:39:21 rpmi: libpango-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Nov 4 07:39:21 rpmi: libXi-1.8-alt1 sisyphus+285490.200.1.1 1632124180 installed <13>Nov 4 07:39:21 rpmi: libXinerama-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Nov 4 07:39:21 rpmi: librsvg-1:2.57.0-alt1 sisyphus+329802.400.1.1 1694991606 installed <13>Nov 4 07:39:21 rpmi: libpango-gir-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Nov 4 07:39:21 rpmi: libtk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Nov 4 07:39:21 rpmi: tk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Nov 4 07:39:21 rpmi: libXcursor-1.2.1-alt1 sisyphus+297765.200.1.1 1649053934 installed <13>Nov 4 07:39:21 rpmi: libXpm-3.5.17-alt1 sisyphus+330921.100.1.1 1696400258 installed <13>Nov 4 07:39:21 rpmi: libXmu-1.1.4-alt1 sisyphus+308663.1000.1.1 1666168416 installed <13>Nov 4 07:39:21 rpmi: libXrandr-1.5.4-alt1 sisyphus+330992.100.1.1 1696485401 installed <13>Nov 4 07:39:21 rpmi: libXcomposite-0.4.6-alt1 sisyphus+311188.200.1.1 1670233684 installed <13>Nov 4 07:39:21 rpmi: libXdamage-1.1.6-alt1 sisyphus+311188.300.1.1 1670233713 installed <13>Nov 4 07:39:21 rpmi: libgtk+2-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Nov 4 07:39:22 rpmi: libxcb-devel-1.16-alt1 sisyphus+327325.200.1.1 1692276267 installed <13>Nov 4 07:39:22 rpmi: libX11-devel-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400319 installed <13>Nov 4 07:39:22 rpmi: libXrender-devel-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Nov 4 07:39:22 rpmi: libXt-devel-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Nov 4 07:39:22 rpmi: libXmu-devel-1.1.4-alt1 sisyphus+308663.1000.1.1 1666168416 installed <13>Nov 4 07:39:22 rpmi: libXext-devel-1.3.5-alt1 sisyphus+309285.100.1.1 1667212413 installed <13>Nov 4 07:39:22 rpmi: libXaw-1.0.15-alt1 sisyphus+331490.200.1.1 1697023203 installed <13>Nov 4 07:39:22 rpmi: libgd3-2.3.3-alt1 sisyphus+286379.100.1.1 1633353310 installed <13>Nov 4 07:39:22 rpmi: tcl-tix-8.4.3-alt4 sisyphus+277292.300.2.1 1625442551 installed <13>Nov 4 07:39:22 rpmi: libat-spi2-core-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 4 07:39:22 rpmi: at-spi2-atk-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Nov 4 07:39:23 rpmi: libgtk+3-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Nov 4 07:39:23 rpmi: libgtk+3-gir-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Nov 4 07:39:23 rpmi: liblasi-1.1.3-alt3 sisyphus+286812.100.2.1 1633968134 installed <13>Nov 4 07:39:23 rpmi: libgraphviz-8.0.5-alt2 sisyphus+311250.1320.175.1 1685627766 installed <13>Nov 4 07:39:23 rpmi: libharfbuzz-cairo-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 4 07:39:23 rpmi: fontconfig-devel-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Nov 4 07:39:23 rpmi: libfreetype-devel-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Nov 4 07:39:23 rpmi: libcairo-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 4 07:39:23 rpmi: libharfbuzz-devel-8.2.2-alt1 sisyphus+332039.100.1.1 1697618710 installed <13>Nov 4 07:39:23 rpmi: libharfbuzz-gir-devel-8.2.2-alt1 sisyphus+332039.100.1.1 1697618703 installed <13>Nov 4 07:39:23 rpmi: libpango-gir-devel-1.51.1-alt1 sisyphus+329828.40.3.1 1695333192 installed <13>Nov 4 07:39:23 rpmi: libcairo-gobject-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Nov 4 07:39:23 rpmi: libXft-devel-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Nov 4 07:39:23 rpmi: libpango-devel-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Nov 4 07:39:23 rpmi: libgtk+3-devel-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Nov 4 07:39:23 rpmi: libXxf86vm-1.1.5-alt1 sisyphus+308663.1400.1.1 1666168534 installed <13>Nov 4 07:39:23 rpmi: libGLX-mesa-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Nov 4 07:39:23 rpmi: libGLX-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 4 07:39:23 rpmi: libGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 4 07:39:23 rpmi: libGLU-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Nov 4 07:39:23 rpmi: libgbm-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Nov 4 07:39:23 rpmi: libEGL-mesa-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Nov 4 07:39:23 rpmi: libEGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 4 07:39:23 rpmi: libglvnd-devel-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Nov 4 07:39:23 rpmi: libiex30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Nov 4 07:39:23 rpmi: libilmthread30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Nov 4 07:39:23 rpmi: libimath29-3.1.6-alt4 sisyphus+327372.100.1.1 1692353383 installed <13>Nov 4 07:39:23 rpmi: libopenexr30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Nov 4 07:39:24 rpmi: libImageMagick7.10-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Nov 4 07:39:24 rpmi: ImageMagick-tools-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Nov 4 07:39:24 rpmi: libGL-devel-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Nov 4 07:39:24 rpmi: libGLU-devel-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Nov 4 07:39:24 rpmi: libepoxy-devel-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Nov 4 07:39:24 rpmi: libgtk+3-gir-devel-3.24.38-alt1 sisyphus+321614.100.1.1 1684749819 installed <13>Nov 4 07:39:24 rpmi: libgtk+2-devel-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Nov 4 07:39:24 rpmi: python3-module-pygobject3-3.46.0-alt1 sisyphus+329802.700.1.1 1694992004 installed <13>Nov 4 07:39:24 rpmi: python3-modules-tkinter-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Nov 4 07:39:24 rpmi: libXaw-devel-1.0.15-alt1 sisyphus+331490.200.1.1 1697023203 installed <13>Nov 4 07:39:24 rpmi: libXinerama-devel-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Nov 4 07:39:24 rpmi: tk-devel-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Nov 4 07:39:24 rpmi: bwidget-1.9.1-alt1 1314273552 installed <13>Nov 4 07:39:24 rpmi: tcl-img-1.4.14-alt1 sisyphus+316986.300.2.1 1679243176 installed <13>Nov 4 07:39:24 rpmi: libtirpc-devel-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Nov 4 07:39:24 rpmi: asciidoc-a2x-9.1.0-alt2 sisyphus+282906.100.1.1 1629104440 installed <13>Nov 4 07:39:24 rpmi: boost-lockfree-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696508918 installed <13>Nov 4 07:39:24 rpmi: boost-python3-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Nov 4 07:39:24 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Nov 4 07:39:24 rpmi: intltool-0.51.0-alt2 1513698802 installed <13>Nov 4 07:39:24 rpmi: man-db-2.11.2-alt1 sisyphus+324180.200.2.1 1688471224 installed <13>Nov 4 07:39:24 rpmi: libmodbus-devel-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Nov 4 07:39:24 rpmi: libusb-devel-1.0.26-alt2 sisyphus+305525.100.1.1 1660924428 installed <13>Nov 4 07:39:24 rpmi: tclx-1:8.4.4-alt1 sisyphus+251935.100.1.1 1589842635 installed <13>Nov 4 07:39:24 rpmi: xorg-cf-files-1.0.7-alt3 sisyphus+299066.100.1.1 1650986802 installed <13>Nov 4 07:39:24 rpmi: python3-module-yapps2-2.2.0-alt2 sisyphus+281199.100.1.1 1627462968 installed <13>Nov 4 07:39:24 rpmi: libudev-devel-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Nov 4 07:39:24 rpmi: libreadline-devel-8.2.1-alt1 sisyphus+328858.100.1.1 1694010631 installed <13>Nov 4 07:39:24 rpmi: dos2unix-7.5.1-alt1 sisyphus+328819.100.1.1 1693973916 installed Building target platforms: i586 Building for target i586 Wrote: /usr/src/in/nosrpm/linuxcnc-2.9.1-alt2.20231009.nosrc.rpm (w1.gzdio) Installing linuxcnc-2.9.1-alt2.20231009.src.rpm Building target platforms: i586 Building for target i586 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.36344 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf linuxcnc-2.9.1 + echo 'Source #0 (linuxcnc-2.9.1.tar):' Source #0 (linuxcnc-2.9.1.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/linuxcnc-2.9.1.tar + cd linuxcnc-2.9.1 + /bin/chmod -c -Rf u+rwX,go-w . + echo 'Patch #0 (linuxcnc-2.9.1-alt2.20231009.patch):' Patch #0 (linuxcnc-2.9.1-alt2.20231009.patch): + /usr/bin/patch -p1 patching file .gear/rules patching file .gear/tags/list patching file .gear/upstream/remotes patching file lib/python/qtvcp/lib/virtual_keyboard.py patching file linuxcnc-documentation.desktop patching file linuxcnc.spec patching file scripts/linuxcnc_info.in patching file share/qtvcp/panels/test_panel/test_panel_handler.py patching file src/Makefile patching file src/Makefile.inc.in patching file src/configure.ac + sed -i 's|lib/tcltk/linuxcnc|lib/tcl/linuxcnc|' lib/python/rs274/options.py + sed -i 's|INCLUDES := .|INCLUDES := . /usr/include/tirpc|' src/Makefile + sed -i 's|LDFLAGS := |LDFLAGS := -ltirpc |' src/Makefile + sed 's/ -o root//g' -i src/Makefile + find . -name '*.py' -exec dos2unix '{}' ';' dos2unix: converting file ./tests/trajectory-planner/circular-arcs/test-reverse.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/run_all_tests.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/machine_setup.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/linuxcnc_control.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/m61/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-with-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-no-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/tlo/test-ui.py to Unix format... dos2unix: converting file ./tests/statbuffer-g5x-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/startup-state/test-ui.py to Unix format... dos2unix: converting file ./tests/single-step/test-ui.py to Unix format... dos2unix: converting file ./tests/rs274ngc-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/subs.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/remap.py to Unix format... dos2unix: converting file ./tests/remap/spindle/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/spindle/remap.py to Unix format... dos2unix: converting file ./tests/remap/sequencing/permute.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/remap.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/remap.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/subs.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/namedparams.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/subs.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/oword.py to Unix format... dos2unix: converting file ./tests/remap/introspect/subs.py to Unix format... dos2unix: converting file ./tests/remap/introspect/oword.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/remap.py to Unix format... dos2unix: converting file ./tests/mqtt/display.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-joint/test-ui.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-axis/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/startup-gcode-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/mountaindew/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/basic/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/toplevel.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/remap.py to Unix format... dos2unix: converting file ./tests/mdi-queue-length/test-ui.py to Unix format... dos2unix: converting file ./tests/lathe/test-ui.py to Unix format... dos2unix: converting file ./tests/io-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/subs.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/oword.py to Unix format... dos2unix: converting file ./tests/interp/subroutine-return/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/python/error/canon.py to Unix format... dos2unix: converting file ./tests/interp/python-self/subs.py to Unix format... dos2unix: converting file ./tests/interp/python-self/oword.py to Unix format... dos2unix: converting file ./tests/interp/pymove/subs.py to Unix format... dos2unix: converting file ./tests/interp/pymove/oword.py to Unix format... dos2unix: converting file ./tests/interp/oword-mdi-sub-update/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/mdi-oword-m66/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/m98m99/12-M99-endless-main-program/test-ui.py to Unix format... dos2unix: converting file ./tests/hm2-idrom/check-dmesg.py to Unix format... dos2unix: converting file ./tests/hard-limits/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/mdi/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/jogging/test-ui.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_writer.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_test.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_reader.py to Unix format... dos2unix: converting file ./tests/halmodule.0/test.py to Unix format... dos2unix: converting file ./tests/hal-link-unlink/hallink.py to Unix format... dos2unix: converting file ./tests/ccomp/early-exit/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/stop-button-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/on_abort_command-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/g64/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/feed-rate/test-ui.py to Unix format... dos2unix: converting file ./src/po/fixpaths.py to Unix format... dos2unix: converting file ./src/modsilent.py to Unix format... dos2unix: converting file ./src/hal/utils/elbpcom.py to Unix format... dos2unix: converting file ./src/hal/user_comps/z_level_compensation.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzbc-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzac-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzab-tdr-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/scaragui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/rotarydelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/pumagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/puma560gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/millturngui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/melfagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/max5gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/maho600gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/lineardelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hexagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hbmgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/5axisgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/sim-torch.py to Unix format... dos2unix: converting file ./src/hal/user_comps/scorbot-er-3.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pyvcp.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pmx485.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mqtt-publisher.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mitsub_vfd.py to Unix format... dos2unix: converting file ./src/hal/user_comps/hal_input.py to Unix format... dos2unix: converting file ./src/hal/user_comps/gladevcp.py to Unix format... dos2unix: converting file ./src/hal/drivers/rbf2h.py to Unix format... dos2unix: converting file ./src/hal/drivers/mesa-hostmot2/modbus/modcompile.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/touchy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/listing.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/hal_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/filechooser.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/stepconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/import_mach.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtvcp/qtvcp.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac_gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-plasmac2qt.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-materials.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-cfg2prefs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/pmx485-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/pyui.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_validate.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_handler.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/master.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/commands.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/tests.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/private_data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pncconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/mdro/mdro.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/keybindings.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/gscreen.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/qt5_graphics.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/gremlin.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/player.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/notification.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/icon_theme_helper.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/gmoccapy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/getiniinfo.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/dialogs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/tracking-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/teach-in.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/linuxcnctop.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/lintini.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/image-to-gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/haltest.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/debuglevel.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis-remote.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/makeicon.py to Unix format... dos2unix: converting file ./src/emc/ini/update_ini.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/x1mill/x1mill_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/woodpecker/woodpecker_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qttouchy/qttouchy_handler.py to Unix format... dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py. dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py. dos2unix: converting file ./share/qtvcp/screens/qtplasmac/qtplasmac_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtplasmac/languages/qtplasmac.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtlathe/qtlathe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon/qtdragon_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtaxis/qtaxis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc/qt_cnc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/blender/blender_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_scara/vismach_scara_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/versaprobe/versaprobe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/tool_dialog/tool_dialog_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_probe/test_probe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_panel/test_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_led/test_led_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_dial/test_dial_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_button/test_button_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/spindle_belts/spindle_belts_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/sim_panel/sim_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/copy/copy_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/cam_align/cam_align_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/spartan/spartan_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/silverdragon/silverdragon_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/industrial/industrial_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis/gaxis_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/9_axis/9_axis_handler.py to Unix format... dos2unix: converting file ./scripts/torture.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/stdglue.py to Unix format... dos2unix: Skipping symbolic link ./nc_files/remap_lib/python-stdglue/python/stdglue.py. dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/toplevel.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/remap.py to Unix format... dos2unix: converting file ./nc_files/involute.py to Unix format... dos2unix: converting file ./nc_files/holecircle.py to Unix format... dos2unix: converting file ./nc_files/flowsnake.py to Unix format... dos2unix: converting file ./nc_files/filtertest.py to Unix format... dos2unix: converting file ./nc_files/filtertest-gui.py to Unix format... dos2unix: converting file ./lib/python/vismach.py to Unix format... dos2unix: converting file ./lib/python/vcpparse.py to Unix format... dos2unix: converting file ./lib/python/tooldb.py to Unix format... dos2unix: converting file ./lib/python/rs274/options.py to Unix format... dos2unix: converting file ./lib/python/rs274/interpret.py to Unix format... dos2unix: converting file ./lib/python/rs274/glcanon.py to Unix format... dos2unix: converting file ./lib/python/rs274/author.py to Unix format... dos2unix: converting file ./lib/python/rs274/__init__.py to Unix format... dos2unix: converting file ./lib/python/rs274/OpenGLTk.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_baseclass.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/web_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/virtualkeyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/versa_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/touchEntry.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tool_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tab_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/system_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/stylesheeteditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_stacked.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_slider.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_led.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/simple_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/screen_options.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/runFromLine_dialog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_progress.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_gauge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/richtext_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/radio_axis_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/qtvcp_icons.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_subprog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_routines.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/overlay_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/origin_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/offset_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/nurbs_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_touchy.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_history.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/led_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/joypad.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/jog_increments.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/image_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_selectionbox.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_output.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_input.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/geditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_graphics.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/file_manager.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/fake_status.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/entry_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialog_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialogMixin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/detach_tabs.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/container_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/camview_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/calculator.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/basic_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/axis_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/adjustment_bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button_round.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qtvcp_handler.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_tstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_pstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makepins.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makegui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_istat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_action.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/widgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/web_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/virtualkeyboard_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/versa_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/toolbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/tab_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_slider_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/simplewidgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/screenoptions_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_progress_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_gauge_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/qtvcp_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/overlay_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/nurbs_editor_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/joypad_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/jogincrements_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/hal_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/graphics_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/dialog_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/detach_tabs_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/container_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/camview_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/basic_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/actionbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/logger.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/virtual_keyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/writer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/wordcount.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/table.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/find.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/datetime.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/touchoff_subprogram.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/toolbar_actions.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/sys_notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/ripper/gcode_ripper.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/updater.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/tooltips.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/set_offsets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conversational.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_triangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_star.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_slot.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_settings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_sector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_polygon.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_gusset.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_bolt.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_block.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/scara.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/qt_vismach.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/primitives.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/millturn.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/mill_xyz.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_pdf/PDFViewer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/preferences.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/message.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/mdi_text.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/keybindings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcodes.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/facing.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/colored_formatter.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/aux_program_loader.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/auto_height/auto_height.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/audio_player.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/core.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/pyvcp_widgets.py to Unix format... dos2unix: converting file ./lib/python/pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/pyhal.py to Unix format... dos2unix: converting file ./lib/python/propertywindow.py to Unix format... dos2unix: converting file ./lib/python/popupkeyboard.py to Unix format... dos2unix: converting file ./lib/python/plasmac/triangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/star.py to Unix format... dos2unix: converting file ./lib/python/plasmac/slot.py to Unix format... dos2unix: converting file ./lib/python/plasmac/sector.py to Unix format... dos2unix: converting file ./lib/python/plasmac/run_from_line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/rectangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/polygon.py to Unix format... dos2unix: converting file ./lib/python/plasmac/line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/gusset.py to Unix format... dos2unix: converting file ./lib/python/plasmac/ellipse.py to Unix format... dos2unix: converting file ./lib/python/plasmac/circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/bolt_circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/block.py to Unix format... dos2unix: converting file ./lib/python/multifilebuilder.py to Unix format... dos2unix: converting file ./lib/python/linuxcnc_util.py to Unix format... dos2unix: converting file ./lib/python/linux_event.py to Unix format... dos2unix: converting file ./lib/python/hershey.py to Unix format... dos2unix: converting file ./lib/python/hal_glib.py to Unix format... dos2unix: converting file ./lib/python/hal.py to Unix format... dos2unix: converting file ./lib/python/gremlin_view.py to Unix format... dos2unix: converting file ./lib/python/glnav.py to Unix format... dos2unix: converting file ./lib/python/gladevcp_makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/xembed.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/tooledit_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/status_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/state_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/speedcontrol.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/persistence.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/overridewidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetpage_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/led.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/jogwheel.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/iconview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_widgets.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_sourceview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pythonplugin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_meter.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_mdihistory.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_lightbutton.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin_plus.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_graph.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_filechooser.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_dial.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_bar.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_actions.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gtk_action.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gladebuilder.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/drowidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/core.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/combi_dro.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/calculatorwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/bwidget.py to Unix format... dos2unix: converting file ./lib/python/bitfile.py to Unix format... dos2unix: converting file ./docs/src/mkpre.py to Unix format... dos2unix: converting file ./docs/src/links_db_gen.py to Unix format... dos2unix: converting file ./docs/src/links.py to Unix format... dos2unix: converting file ./docs/src/gui/panelui_handler.py to Unix format... dos2unix: converting file ./docs/src/gen_complist.py to Unix format... dos2unix: converting file ./docs/src/checklinks.py to Unix format... dos2unix: converting file ./debian/tests/linuxcnc-test-ui.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/zlevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/woodpecker_/woodpecker_handler.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/numstr.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/compensate.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/touchy/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/qtplasmac/custom_filter.py to Unix format... dos2unix: converting file ./configs/sim/hitcounter.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/signals.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/plasma.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/lathe_configs/lathehandler.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/blockdelete.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/util.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/panelui-demo/panelui_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/plugins.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/embedding.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/fullscreen.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/axis_resize.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/remap.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/axis/gladevcp/test_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/probe.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/meter_scale.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_ran.py. dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_nonran.py. dos2unix: converting file ./configs/sim/axis/db_demo/db.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/functionhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler_persistent.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/simple-callback/simplecallback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/complex/complex.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/colored-label/coloredlabel.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/class-callback/class_callback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/spinbutton.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/sourceview.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/radio.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox_manual_list.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/animated-backdrop/cairodraw.py to Unix format... + sed -i 's/GROUP="plugdev"/GROUP="uucp"/g' debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.15371 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd linuxcnc-2.9.1 + pushd src ~/RPM/BUILD/linuxcnc-2.9.1/src ~/RPM/BUILD/linuxcnc-2.9.1 + ./autogen.sh + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CFLAGS + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CXXFLAGS + FFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FFLAGS + FCFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FCFLAGS + '[' -n '' ']' ++ printf %s '-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' ++ sed -r 's/(^|[[:space:]]+)-[^m][^[:space:]]*//g' + ASFLAGS=' -march=i586 -mtune=generic' + export ASFLAGS + export lt_cv_deplibs_check_method=pass_all + lt_cv_deplibs_check_method=pass_all + readlink -e -- ./configure + xargs -ri dirname -- '{}' + xargs -ri find '{}' -type f '(' -name config.sub -or -name config.guess ')' -printf '%h/\n' + sort -u + xargs -rn1 install -pm755 -- /usr/share/gnu-config/config.sub /usr/share/gnu-config/config.guess + configure_runstatedir_flags= + grep -qF runstatedir=DIR ./configure + configure_runstatedir_flags=--runstatedir=/var/run + ./configure --build=i586-alt-linux --host=i586-alt-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var/lib --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --disable-silent-rules --runstatedir=/var/run --without-included-gettext --enable-non-distributable=yes --with-realtime=uspace configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext checking for i586-alt-linux-c++... no checking for i586-alt-linux-clang++... no checking for c++... c++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking for a BSD-compatible install... /bin/install -c checking whether c++ supports C++17 features with -std=gnu++17... yes checking build toplevel... /usr/src/RPM/BUILD/linuxcnc-2.9.1 checking installation prefix... /usr checking for grep... /bin/grep checking for egrep... /usr/bin/egrep checking for pkg-config... /usr/bin/pkg-config checking for i586-alt-linux-gcc... i586-alt-linux-gcc checking whether the compiler supports GNU C... yes checking whether i586-alt-linux-gcc accepts -g... yes checking for i586-alt-linux-gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for rpc/rpc.h... no checking for get_myaddress in -ltirpc... yes checking for rpc/rpc.h... yes checking for rtai-config... none checking for xeno-config... none checking for realtime API(s) to use... uspace checking whether to enable userspace PCI access... yes checking for libudev... yes - version 254 checking for cc version... not specified checking for i586-alt-linux-gcc... (cached) i586-alt-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i586-alt-linux-gcc accepts -g... (cached) yes checking for i586-alt-linux-gcc option to enable C11 features... (cached) none needed checking how to run the C preprocessor... i586-alt-linux-gcc -E checking for usability of linux/hidraw.h... yes checking for usability of rpc/rpc.h... yes checking for libmodbus3... yes - version 3.1.10 checking for libusb-1.0... yes checking for libgpiod... checking for main in -lgpiod... no configure: WARNING: Could not find libgpiod, not building hal_gpio checking for module installation directory... /usr/lib/linuxcnc/modules checking for glib... yes - 2.78.1 checking for GTK 3.22.4 or above... yes - 3.24.38 checking for GTK 2.4.0 or above... yes - 2.24.33 checking for libgnomeprintui-2.2... no -- printing from classicladder will not be possible checking whether make sets $(MAKE)... yes checking for i586-alt-linux-ranlib... no checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for install... /bin/install -c checking for sed... /bin/sed checking for ps... /bin/ps checking for kill... /bin/kill checking for whoami... /usr/bin/whoami checking for awk... /bin/awk checking for pidof... /bin/pidof checking for ipcs... /usr/bin/ipcs checking for fuser... /usr/bin/fuser checking for yapps... no checking for yapps2... /usr/bin/yapps2 checking for mandb... /usr/bin/mandb checking for intltool-extract... /usr/bin/intltool-extract checking for yapps... (cached) /usr/bin/yapps2 checking build system type... i586-alt-linux-gnu checking host system type... i586-alt-linux-gnu checking for boostlib >= (102000)... yes checking for python build information... checking for python3.11... python3.11 checking for main in -lpython3.11... yes results of the Python check: Binary: python3.11 Library: python3.11 Include Dir: /usr/include/python3.11 checking for python3.11... /usr/bin/python3.11 checking for python... (cached) /usr/bin/python3.11 checking for a version of Python >= '2.1.0'... yes checking for the sysconfig Python package... yes checking for Python include path... -I/usr/include/python3.11 checking for Python library path... -L/usr/lib -lpython3.11 checking for Python site-packages path... /usr/lib/python3/site-packages checking for Python platform specific site-packages path... checking python extra libraries... -ldl -lm checking python extra linking flags... -Xlinker -export-dynamic checking consistency of all components of python development environment... yes checking whether the Boost::Python library is available... yes checking whether boost_python is the correct library... no checking whether boost_python311-mt is the correct library... yes checking whether to build documentation... no checking for sys/io.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for semtimedop... yes checking for optreset... no checking for library containing dlopen... none required checking for library containing clock_nanosleep... none required checking for tcl... find: '/usr/lib/chkpwd': Permission denied /usr/lib/tclConfig.sh found checking for tk... /usr/lib/tkConfig.sh found checking whether to check for runtime dependencies... yes checking for BWidget using /usr/bin/tclsh8.6... found checking for BLT using /usr/bin/tclsh8.6... not found checking for tclX using /usr/bin/tclsh8.6... found checking for python pango module... found checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X11/extensions/Xinerama.h... yes checking for XineramaQueryExtension in -lXinerama... yes checking for readline/readline.h... yes checking for readline/history.h... yes Trying readline without -ltermcap checking for readline in -lreadline... yes Trying readline with -ltermcap checking for readline in -lreadline... no Readline does not require -ltermcap checking whether readline license is compatible with GPL-2... no configure: WARNING: The LinuxCNC binary you are building may not be distributable due to a license incompatibility with LinuxCNC (some portions GPL-2 only) and Readline version 6 and greater (GPL-3 or later). configure: WARNING: User requested to enable non-distributable builds. Continuing. checking for locale.h... yes checking for setlocale... yes checking for libintl.h... yes checking for gettext in -lintl... no checking for xgettext... /usr/bin/xgettext checking for msgfmt... /usr/bin/msgfmt checking python version... OK checking match between tk and Tkinter versions... 8.6 checking for site-package location... /usr/lib/python3/site-packages checking for working GLU quadrics... yes checking for Xmu headers... checking for X11/Xmu/Xmu.h... yes configure: creating ./config.status config.status: creating ../scripts/rtapi.conf config.status: creating ../scripts/linuxcnc config.status: creating ../scripts/linuxcnc_info config.status: creating ../scripts/halrun config.status: creating ../scripts/rip-environment config.status: creating ../scripts/haltcl config.status: creating ../scripts/halcmd_twopass config.status: creating ../scripts/realtime config.status: creating ../scripts/runtests config.status: creating ../scripts/linuxcnc_var config.status: creating ../scripts/linuxcnc-checklink config.status: creating Makefile.inc config.status: creating Makefile.modinc config.status: creating ../tcl/linuxcnc.tcl config.status: creating ../lib/python/nf.py config.status: creating ../scripts/linuxcncmkdesktop config.status: creating ../share/applications/linuxcnc-latency.desktop config.status: creating ../share/applications/linuxcnc-latency-histogram.desktop config.status: creating ../share/applications/linuxcnc-pncconf.desktop config.status: creating ../share/applications/linuxcnc-stepconf.desktop config.status: creating ../share/applications/linuxcnc.desktop config.status: creating ../share/desktop-directories/linuxcnc-cnc.directory config.status: creating ../share/desktop-directories/linuxcnc-ref.directory config.status: creating ../share/desktop-directories/linuxcnc-doc.directory config.status: creating ../share/menus/CNC.menu config.status: creating config.h configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext ###################################################################### # LinuxCNC - Enhanced Machine Controller # ###################################################################### # # # LinuxCNC is a software system for computer control of machine # # tools such as milling machines. LinuxCNC is released under the # # GPL. Check out http://www.linuxcnc.org/ for more details. # # # # # # It seems that ./configure completed successfully. # # This means that RT is properly installed # # If things don't work check config.log for errors & warnings # # # # warning: If you already have an installed linuxcnc, this will # # replace an existing installation. If you have installed # # a linuxcnc package, this will damage the package. # # hint: To test a self-built version of linuxcnc without damaging # # the package version, don't specify a --prefix # # # # Next compile by typing # # make # # then install it by typing # # sudo make install # # # # To run the software type # # linuxcnc # # # ###################################################################### + make -j16 make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/115 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating abs.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating abs_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating and2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating anglejog.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating axistest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bin2gray.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating biquad.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bitslice.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bitwise.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bldc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating blend.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating carousel.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating charge_pump.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarke2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarke3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarkeinv.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating comp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating constant.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating dbounce.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating corexy_by_hal.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ddt.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating deadzone.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating demux.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating differential.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating div2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating edge.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating estop_latch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating eoffset_per_angle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating filter_kalman.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating feedcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating flipflop.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gantry.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gearchange.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gray2bin.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating histobins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating hypot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating homecomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ilowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating integ.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating invert.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating joyhandle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating knob2float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating latencybins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit1.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit_axis.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lincurve.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating logic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lut5.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating match8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating maj3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating max31855.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_pktgyro_test.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating message.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating millturn.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating minmax.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating moveoff.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mult2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating multiclick.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating multiswitch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux4.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux16.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating near.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating offset.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating not.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ohmic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating oneshot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating or2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating orient.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating plasmac.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sample_hold.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating scale.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating scaled_s32_sums.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating select8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_axis_hardware.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_home_switch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_matrix_kb.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_parport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating simple_tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sphereprobe.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating spindle_monitor.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating steptest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sum2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating thc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating thcud.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating threadtest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating time.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating timedelay.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating timedelta.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tof.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating toggle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating toggle2nist.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ton.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tristate_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tristate_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating updown.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating userkins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating wcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xhc_hb04_util.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xor2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xyzab_tdr_kins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating serport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_uart.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_7i65.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_float_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_float_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/237 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' sed hal/drivers/mesa_uart.comp -e "1 s/mesa_uart/mesa_uart_test/" > ../tests/halcompile/serial-out-of-tree/mesa_uart_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' sed ../docs/src/hal/rand.comp -e "1 s/rand/rand_test/" > ../tests/halcompile/userspace/rand_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp ../scripts/rtapi.conf ../tests/uspace/spawnv-root/rtapi.conf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_timer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/shm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_shm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/sem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/phantom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/rcs/rcs_exit.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/locmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_sem.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/posemath.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/memsem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/timer.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/rcs/rcs_print.cc libnml/rcs/rcs_print.cc: In function 'int rcs_fputs(const char*)': libnml/rcs/rcs_print.cc:372:26: warning: the address of 'rcs_print_file_name' will never be NULL [-Waddress] 372 | if (NULL == rcs_print_file_name) { | ^ libnml/rcs/rcs_print.cc:48:6: note: 'rcs_print_file_name' declared here 48 | char rcs_print_file_name[80] = "rcs_out.txt"; | ^~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/physmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/sendn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/recvn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_pm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_in.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_up.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/shmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/tcp_opts.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_aup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_oi.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/cmd_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_dup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_cfg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_xup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nmldiag.cc libnml/nml/nmldiag.cc: In function 'int nml_print_diag_list()': libnml/nml/nmldiag.cc:134:26: warning: the address of 'CMS::BufferName' will never be NULL [-Waddress] 134 | if (NULL != nml->cms->BufferName) { | ^ In file included from libnml/cms/cmsdiag.hh:18, from libnml/nml/nmldiag.hh:18, from libnml/nml/nmldiag.cc:16: libnml/cms/cms.hh:354:10: note: 'CMS::BufferName' declared here 354 | char BufferName[LINELEN]; | ^~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nmlmsg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/stat_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_string.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/linklist/linklist.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_ulapi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cmsdiag.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/tcp_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in config.status: creating ../docs/man/man1/linuxcnc.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/tcpmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_parport.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/rtapi_pci.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/streamer_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/sampler_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/emccalib.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/emccalib.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/emccalib.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/emccalib.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" Note: Writing emccalib.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/halstreamer.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/halstreamer.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/halstreamer.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/halstreamer.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" Note: Writing halstreamer.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/mqtt-publisher.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/mqtt-publisher.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/mqtt-publisher.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/mqtt-publisher.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" Note: Writing mqtt-publisher.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/sendkeys.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/sendkeys.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/sendkeys.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/sendkeys.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" Note: Writing sendkeys.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/svd-ps_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/svd-ps_vfd.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/svd-ps_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/svd-ps_vfd.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" Note: Writing svd-ps_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/hy_gt_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/hy_gt_vfd.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/hy_gt_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/hy_gt_vfd.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" Note: Writing hy_gt_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/panelui.c hal/components/panelui.c: In function 'main': hal/components/panelui.c:211:5: warning: 'Py_SetProgramName' is deprecated [-Wdeprecated-declarations] 211 | Py_SetProgramName(wname); | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.11/Python.h:94, from hal/components/panelui.c:73: /usr/include/python3.11/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man3/hm2_pktuart.3` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man3/hm2_pktuart.3.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man3', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man3/hm2_pktuart.3.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man3/hm2_pktuart.3.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" Note: Writing hm2_pktuart.3 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_modbus.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_init.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/enum.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/enum.9.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/enum.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/enum.9.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/enum.9.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" Note: Writing enum.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/gs2_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/streamer.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/streamer.9.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/streamer.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/streamer.9.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/streamer.9.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" Note: Writing streamer.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/svd-ps_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/hy_gt_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/shuttle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/sendkeys.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/xhc-whb04b-6.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/xhc-whb04b-6.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/xhc-whb04b-6.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/xhc-whb04b-6.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" Note: Writing xhc-whb04b-6.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/vfs11_vfd/vfs11_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/inifile/inivar.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/config.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/emc_mods.c hal/classicladder/emc_mods.c: In function 'ConvVarNameToHalSigName': hal/classicladder/emc_mods.c:137:20: warning: the comparison will always evaluate as 'true' for the address of 'name' will never be NULL [-Waddress] 137 | if(sig->name) { | ^~~ In file included from hal/classicladder/emc_mods.c:25: ./hal/hal_priv.h:332:10: note: 'name' declared here 332 | char name[HAL_NAME_LEN + 1]; /* signal name */ | ^~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/inifile/inifile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_mod.cc libnml/nml/nml_mod.cc: In member function 'void NML_MODULE::setCmdChannel(RCS_CMD_CHANNEL*)': libnml/nml/nml_mod.cc:274:16: warning: the address of 'CMS::ProcessName' will never be NULL [-Waddress] 274 | if (NULL != commandIn->cms->ProcessName) | ^ In file included from libnml/nml/nml_oi.hh:20, from libnml/nml/nml_mod.cc:66: libnml/cms/cms.hh:356:10: note: 'CMS::ProcessName' declared here 356 | char ProcessName[LINELEN]; | ^~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files_project.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/protocol_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/protocol_modbus_slave.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/serial_linux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/socket_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/classicladder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/classicladder_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/socket_server.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/drawing_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/config_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/drawing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/editproperties_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_app.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/vars_names.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halsh.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_completion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_main.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/manager_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script elbpcom Copying python script elbpcom make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying Modbus template mesa_modbus.c.tmpl make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script modcompile Copying python script modcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halrmt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/vfdb_vfd/vfdb_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/huanyang-vfd/hy_comm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/spy_vars_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/huanyang-vfd/hy_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/symbols_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/miscgtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/meter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_commands.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_horiz.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_trig.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-hb04.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_vert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_disp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/pendant-types.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/usb.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/hal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/canon_position.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcargs.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/modal_state.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcops.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/xhc-whb04b6.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/sockets.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/interpl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/pendant.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inihal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_common.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/main.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/shcom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/emcmotglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_db.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_mmap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/emcIniFile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inispindle.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inijoint.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/iniaxis.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/initraj.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/backtrace.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/schedrmt.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emccanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emclcd.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcsched.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcrsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_base.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emcsvr.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/halui.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_arc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_array.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/usrmotintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_check.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_execute.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_queue.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_inverse.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_cycles.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_find.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emctaskmain.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_internal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_write.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/nurbs_additional_functions.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_convert.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emctask.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_read.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_g7x.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_o_word.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_inspection.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_setup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/ugenserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_remap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_python.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_namedparams.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/canterp/canterp.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion-logger/motion-logger.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyparamclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/cs/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling module_helper/module_helper.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/saicanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/da/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/de/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/iotask/ioControl.cc emc/iotask/ioControl.cc: In function 'int main(int, char**)': emc/iotask/ioControl.cc:694:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 694 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:695:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 695 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:696:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 696 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/es/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/fi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/fr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/hu/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ja/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/it/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/nb/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/pl/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ru/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ro/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sk/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/dummyemcstat.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sv/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/cs/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/vi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/da/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/de/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/es/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/fr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/hu/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/canonmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/it/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/nb/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/sk/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/pl/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/sr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/vi/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/linuxcnc.h ../include/linuxcnc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/emcIniFile.hh ../include/emcIniFile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/iniaxis.hh ../include/iniaxis.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inijoint.hh ../include/inijoint.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inispindle.hh ../include/inispindle.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/initraj.hh ../include/initraj.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inihal.hh ../include/inihal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/cubic.h ../include/cubic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/kinematics.h ../include/kinematics.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/switchkins.h ../include/switchkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/genhexkins.h ../include/genhexkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/genserkins.h ../include/genserkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/pentakins.h ../include/pentakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/pumakins.h ../include/pumakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tc.h ../include/tc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tc_types.h ../include/tc_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tp.h ../include/tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tp_types.h ../include/tp_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/blendmath.h ../include/blendmath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tcq.h ../include/tcq.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/spherical_arc.h ../include/spherical_arc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/emcmotcfg.h ../include/emcmotcfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/motion.h ../include/motion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/homing.h ../include/homing.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/simple_tp.h ../include/simple_tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/state_tag.h ../include/state_tag.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/usrmotintf.h ../include/usrmotintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/axis.h ../include/axis.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/canon.hh ../include/canon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emctool.h ../include/emctool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/canon_position.hh ../include/canon_position.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emc.hh ../include/emc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emc_nml.hh ../include/emc_nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emccfg.h ../include/emccfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/iotask/ioControl_v2.cc emc/iotask/ioControl_v2.cc: In function 'int main(int, char**)': emc/iotask/ioControl_v2.cc:791:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 791 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:792:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 792 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:793:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 793 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcglb.h ../include/emcglb.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcpos.h ../include/emcpos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcpose.h ../include/emcpose.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/interp_return.hh ../include/interp_return.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/interpl.hh ../include/interpl.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/motion_types.h ../include/motion_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/debugflags.h ../include/debugflags.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_internal.hh ../include/interp_internal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_fwd.hh ../include/interp_fwd.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_base.hh ../include/interp_base.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/modal_state.hh ../include/modal_state.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/rs274ngc.hh ../include/rs274ngc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/sai/saicanon.hh ../include/saicanon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/hal_parport.h ../include/hal_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/hal.h ../include/hal.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/drivers/mesa-hostmot2/hostmot2-serial.h ../include/hostmot2-serial.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/locmem.hh ../include/locmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/memsem.hh ../include/memsem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/phantom.hh ../include/phantom.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/physmem.hh ../include/physmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/recvn.h ../include/recvn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/rem_msg.hh ../include/rem_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/sendn.h ../include/sendn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/shmem.hh ../include/shmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/tcpmem.hh ../include/tcpmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms.hh ../include/cms.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_aup.hh ../include/cms_aup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_dup.hh ../include/cms_dup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_cfg.hh ../include/cms_cfg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_srv.hh ../include/cms_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_up.hh ../include/cms_up.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_user.hh ../include/cms_user.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyblock.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_xup.hh ../include/cms_xup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cmsdiag.hh ../include/cmsdiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/tcp_opts.hh ../include/tcp_opts.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/tcp_srv.hh ../include/tcp_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/inifile/inifile.h ../include/inifile.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/inifile/inifile.hh ../include/inifile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/linklist/linklist.hh ../include/linklist.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/cmd_msg.hh ../include/cmd_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml.hh ../include/nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_mod.hh ../include/nml_mod.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_srv.hh ../include/nml_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_oi.hh ../include/nml_oi.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_type.hh ../include/nml_type.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nmldiag.hh ../include/nmldiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nmlmsg.hh ../include/nmlmsg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/stat_msg.hh ../include/stat_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_sem.h ../include/_sem.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/sem.hh ../include/sem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/shm.hh ../include/shm.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_shm.h ../include/_shm.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_timer.h ../include/_timer.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/timer.hh ../include/timer.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/posemath.h ../include/posemath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/gotypes.h ../include/gotypes.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/gomath.h ../include/gomath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/sincos.h ../include/sincos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs.hh ../include/rcs.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs_exit.hh ../include/rcs_exit.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs_print.hh ../include/rcs_print.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcsversion.h ../include/rcsversion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi.h ../include/rtapi.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_app.h ../include/rtapi_app.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_atomic.h ../include/rtapi_atomic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_bitops.h ../include/rtapi_bitops.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_bool.h ../include/rtapi_bool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_byteorder.h ../include/rtapi_byteorder.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_device.h ../include/rtapi_device.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_firmware.h ../include/rtapi_firmware.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_gfp.h ../include/rtapi_gfp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_io.h ../include/rtapi_io.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/pythonplugin/python_plugin.cc emc/pythonplugin/python_plugin.cc: In constructor 'PythonPlugin::PythonPlugin(_inittab*)': emc/pythonplugin/python_plugin.cc:298:22: warning: 'void Py_SetProgramName(const wchar_t*)' is deprecated [-Wdeprecated-declarations] 298 | Py_SetProgramName(program); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ In file included from /usr/include/python3.11/Python.h:94, from /usr/include/boost/python/detail/wrap_python.hpp:178, from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/ssize_t.hpp:9, from /usr/include/boost/python/object.hpp:8, from emc/pythonplugin/python_plugin.hh:25, from emc/pythonplugin/python_plugin.cc:19: /usr/include/python3.11/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_limits.h ../include/rtapi_limits.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_list.h ../include/rtapi_list.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math.h ../include/rtapi_math.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math_i386.h ../include/rtapi_math_i386.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math64.h ../include/rtapi_math64.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_mutex.h ../include/rtapi_mutex.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_parport.h ../include/rtapi_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_pci.h ../include/rtapi_pci.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_slab.h ../include/rtapi_slab.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_stdint.h ../include/rtapi_stdint.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_ctype.h ../include/rtapi_ctype.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_string.h ../include/rtapi_string.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_errno.h ../include/rtapi_errno.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_vsnprintf.h ../include/rtapi_vsnprintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/da.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/fi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/cs.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/es.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/hu.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyemctypes.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/fr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/de.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/it.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ja.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/nb.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sk.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/pl.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/pt_BR.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ro.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sv.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ru.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/vi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/driver.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_CN.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_TW.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_HK.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gladevcp Copying python script gladevcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pyvcp Copying python script pyvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_input Copying python script hal_input make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script scorbot-er-3 Copying python script scorbot-er-3 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mitsub_vfd Copying python script mitsub_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script sim-torch Copying python script sim-torch make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pmx485 Copying python script pmx485 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script z_level_compensation Copying python script z_level_compensation make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mqtt-publisher Copying python script mqtt-publisher make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pumagui Copying python script pumagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script puma560gui Copying python script puma560gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script lineardelta Copying python script lineardelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script scaragui Copying python script scaragui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hexagui Copying python script hexagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/rs274ngc_pre.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script 5axisgui Copying python script 5axisgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script maho600gui Copying python script maho600gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hbmgui Copying python script hbmgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script rotarydelta Copying python script rotarydelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script melfagui Copying python script melfagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script millturngui Copying python script millturngui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script max5gui Copying python script max5gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzac-trt-gui Copying python script xyzac-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzab-tdr-gui Copying python script xyzab-tdr-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzbc-trt-gui Copying python script xyzbc-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script axis-remote Copying python script axis-remote make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script linuxcnctop Copying python script linuxcnctop make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi Copying python script mdi make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script lintini Copying python script lintini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script debuglevel Copying python script debuglevel make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_manualtoolchange Copying python script hal_manualtoolchange make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script image-to-gcode Copying python script image-to-gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script teach-in Copying python script teach-in make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script axis Copying python script axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script tracking-test Copying python script tracking-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file touchy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script touchy Copying python script touchy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying linuxcnc-wizard.gif make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script filechooser.py Copying python script filechooser.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_interface.py Copying python script hal_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script listing.py Copying python script listing.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file spindle.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script stepconf Copying python script stepconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file halui_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisx.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisz.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisu.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisv.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script import_mach.py Copying python script import_mach.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisa.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file help.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file mesa0.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script tests.py Copying python script tests.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script data.py Copying python script data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file mesa1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file external.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file screen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file vcp.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file x_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file x_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file y_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script private_data.py Copying python script private_data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file y_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file z_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file z_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file a_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file a_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file s_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file realtime.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file dialogs.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pncconf Copying python script pncconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/axis/extensions/_toglmodule.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gscreen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gscreen2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gremlin Copying python script gremlin make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gremlin.py Copying python script gremlin.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qt5_graphics.py Copying python script qt5_graphics.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script keybindings.py Copying python script keybindings.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying INI script panelui_spec.ini cp emc/usr_intf/pyui/panelui_spec.ini ../lib/python/pyui/panelui_spec.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying INI script _panelui.ini cp emc/usr_intf/pyui/_panelui.ini ../lib/python/pyui/_panelui.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gscreen Copying python script gscreen make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script master.py Copying python script master.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pyui Copying python script pyui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script panelui_validate.py Copying python script panelui_validate.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script __init__.py Copying python script __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script commands.py Copying python script commands.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gmoccapy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtvcp Copying python script qtvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script dialogs.py Copying python script dialogs.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script getiniinfo.py Copying python script getiniinfo.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script player.py Copying python script player.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyarrays.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script notification.py Copying python script notification.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script icon_theme_helper.py Copying python script icon_theme_helper.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-materials Copying python script qtplasmac-materials make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gmoccapy Copying python script gmoccapy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-cfg2prefs Copying python script qtplasmac-cfg2prefs make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script M190 Copying python script M190 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pmx485-test Copying python script pmx485-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac_gcode Copying python script qtplasmac_gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdro Copying python script mdro make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-plasmac2qt Copying python script qtplasmac-plasmac2qt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script update_ini Copying python script update_ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/counter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/debounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/encoder_ratio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/enum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/halmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/boss_plc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/mux_generic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/siggen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/threads.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/supply.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interpmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/weighted_sum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/sim_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/lcd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/modmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/pid.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/streamer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_speaker.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/sampler.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/cpuinfo.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_pi_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_bb_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/bitfile.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/dpll.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/bspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/abs_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/led.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/inm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/inmux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/ioport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/gcodemodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/raw.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hostmot2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/rcpwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_ppmc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pktuart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/outm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/resolver.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/ssr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_gm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/tram.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/tp_pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/axis/extensions/emcmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_pci.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/module_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i90.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i43.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_spi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/xy2mod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/setsserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/utils/scope_rt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/trivkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rotatekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/maxkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/tripodkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyinterp1.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/corexykins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/lineardeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_rpspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/kins_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rosekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/userkfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rotarydeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/scorbot-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/xyzac-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_eth.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/switchkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/pentakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/xyzbc-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/scarakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/sserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/cubic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/5axiskins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/trtfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genhexkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/pumakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/homemod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tpmod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tcq.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/spherical_arc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' config.status: creating ../scripts/setup_designer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/motion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking liblinuxcnc.a make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script halcompile Copying python script halcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/homing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/command.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing abs.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnc_module_helper make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/blendmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing abs_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing and2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing anglejog.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing axistest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bin2gray.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/control.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing biquad.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bitwise.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing blend.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bldc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing carousel.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library liblinuxcncini.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing charge_pump.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarke2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/rotarydeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarke3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarkeinv.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing comp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/lineardeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing constant.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' tooldata: depends: objects/emc/tooldata/tooldata_mmap.o objects/emc/tooldata/tooldata_common.o objects/emc/tooldata/tooldata_db.o tooldata: Linking: libtooldata.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module _togl.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing corexy_by_hal.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing dbounce.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ddt.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing deadzone.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing demux.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing differential.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing div2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing edge.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing eoffset_per_angle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing estop_latch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing feedcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing filter_kalman.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing flipflop.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gantry.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gearchange.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gray2bin.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing homecomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing histobins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing hypot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ilowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing integ.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing invert.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing knob2float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing joyhandle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit1.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing latencybins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit_axis.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lut5.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing maj3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing match8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library liblinuxcnchal.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing max31855.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_pktgyro_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing message.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing millturn.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing minmax.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mult2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing moveoff.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing multiclick.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing multiswitch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux16.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux4.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing near.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing not.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing offset.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ohmic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing oneshot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing or2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing orient.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sample_hold.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing scale.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing select8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing scaled_s32_sums.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_home_switch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing plasmac.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_matrix_kb.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_axis_hardware.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_parport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing simple_tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing spindle_monitor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing steptest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sphereprobe.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sum2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thcud.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing threadtest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing time.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing timedelay.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing timedelta.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tof.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing toggle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing toggle2nist.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ton.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tristate_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tristate_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing updown.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing userkins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing wcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xhc_hb04_util.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xor2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xyzab_tdr_kins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing serport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_7i65.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_uart.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/abs_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/and2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/abs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bin2gray.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library libposemath.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bitwise.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bitslice.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/axistest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/blend.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/charge_pump.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarke3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarke2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/anglejog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/biquad.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/comp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/constant.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarkeinv.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_float_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_float_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/corexy_by_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/dbounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ddt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/deadzone.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/differential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/demux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/estop_latch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/edge.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/feedcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/div2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/carousel.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/flipflop.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gearchange.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/filter_kalman.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gray2bin.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/homecomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gantry.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/eoffset_per_angle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/integ.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bldc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/hypot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/histobins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ilowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/knob2float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/invert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit1.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/latencybins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/joyhandle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lincurve.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/maj3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lut5.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/logic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit_axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/match8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/minmax.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/message.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mesa_pktgyro_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mult2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/multiswitch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/millturn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/max31855.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/multiclick.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux16.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux4.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/not.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/offset.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/near.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/or2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ohmic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sample_hold.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/scale.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/select8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/scaled_s32_sums.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/orient.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_home_switch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking rtapi_app make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sphereprobe.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/moveoff.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sum2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/threadtest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/spindle_monitor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/steptest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/thcud.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/thc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/timedelay.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/time.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tof.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/timedelta.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/toggle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/toggle2nist.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ton.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tristate_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tristate_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/wcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/updown.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xor2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_axis_hardware.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/boss_plc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/debounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/enum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/serport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/userkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/counter.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/mesa_uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/encoder_ratio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/stepgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xhc_hb04_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xyzab_tdr_kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lcd.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/siggen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/mesa_7i65.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux_generic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pid.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pwmgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/supply.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/threads.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/weighted_sum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/watchdog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/modmath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_speaker.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/streamer.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sampler.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_ppmc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_bb_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_gm.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_pi_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_pci.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/setsserial.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_eth.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_spi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_7i43.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_7i90.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_rpspi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hostmot2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/classicladder_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_lib.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/trivkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/maxkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rotatekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scope_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tripodkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lineardeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rosekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scorbot-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf liblinuxcncini.so.0 ../lib/liblinuxcncini.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pentakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libposemath.so.0 ../lib/libposemath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/corexykins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/genhexkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rotarydeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf liblinuxcnchal.so.0 ../lib/liblinuxcnchal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzac-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/genserkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzbc-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scarakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/5axiskins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pumakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/motmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/homemod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tpmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage and2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage abs.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage abs_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage anglejog.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bin2gray.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage axistest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage biquad.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bitwise.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bitslice.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage blend.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage charge_pump.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage carousel.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bldc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarke2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarkeinv.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage comp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarke3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage constant.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking inivar make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_float_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_float_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage corexy_by_hal.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage dbounce.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage deadzone.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ddt.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage demux.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage differential.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage div2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage eoffset_per_angle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage edge.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage estop_latch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage feedcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage flipflop.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage filter_kalman.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gray2bin.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gearchange.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gantry.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage homecomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage integ.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage histobins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage hypot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ilowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage invert.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage joyhandle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage knob2float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage latencybins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit1.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lincurve.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit_axis.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage logic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lut5.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage maj3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage match8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_pktgyro_test.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage max31855.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage message.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage millturn.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage minmax.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mult2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage moveoff.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage multiswitch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage multiclick.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux16.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux4.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage near.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage not.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage offset.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ohmic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage oneshot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage or2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage orient.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sample_hold.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage scale.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage scaled_s32_sums.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage select8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_home_switch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_matrix_kb.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_axis_hardware.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_parport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage simple_tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage plasmac.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sphereprobe.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage spindle_monitor.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage steptest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sum2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thcud.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage threadtest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage time.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage timedelay.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage timedelta.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tof.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage toggle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage toggle2nist.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ton.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tristate_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tristate_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage updown.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage userkins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage wcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xhc_hb04_util.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xor2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xyzab_tdr_kins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tpcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_7i65.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage serport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_uart.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thermistor.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/plasmac.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thermistor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halsampler make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halstreamer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking panelui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking shuttle make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hy_gt_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking sendkeys make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking svd-ps_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing wj200_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing pi500_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking gs2_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking vfdb_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halmeter make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking vfs11_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libtooldata.so.0 ../lib/libtooldata.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking xhc-hb04 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' emc/Submakefile:Linking genserkins make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hy_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking mb2hal make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/abs_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/abs.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/and2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/anglejog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module lineardeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/lineardeltakins.so objects/emc/kinematics/lineardeltakins.o -lboost_python311-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/axistest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bin2gray.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/biquad.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bitslice.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bitwise.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module rotarydeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/rotarydeltakins.so objects/emc/kinematics/rotarydeltakins.o -lboost_python311-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bldc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/blend.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/carousel.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/charge_pump.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarke2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarke3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module _hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarkeinv.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/comp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/constant.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_float_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_float_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halscope make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/corexy_by_hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/dbounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ddt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halcmd hal/utils/../hal_priv.h:135:27: warning: type of 'hal_data' does not match original declaration [-Wlto-type-mismatch] 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:246:16: note: type 'struct hal_data_t' should match type 'struct hal_data_t' 246 | typedef struct hal_data_t { | ^ hal/utils/../hal_priv.h:135:27: note: 'hal_data' was previously declared here 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:135:27: note: code may be misoptimized unless '-fno-strict-aliasing' is used make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/deadzone.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/demux.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/differential.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/div2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/edge.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/eoffset_per_angle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/estop_latch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/feedcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking libpyplugin.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,libpyplugin.so.0 -shared -o ../lib/libpyplugin.so.0 objects/emc/pythonplugin/python_plugin.o ../lib/liblinuxcncini.so -lstdc++ -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/filter_kalman.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/flipflop.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gantry.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking classicladder make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gearchange.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gray2bin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/histobins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/homecomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hypot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ilowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/integ.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking xhc-whb04b-6 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/invert.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/joyhandle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/knob2float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/latencybins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit1.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit_axis.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lincurve.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/logic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lut5.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/maj3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/match8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/max31855.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_pktgyro_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/message.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/millturn.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/minmax.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/moveoff.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mult2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/multiclick.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/multiswitch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux16.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux4.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/near.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/not.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/offset.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ohmic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/oneshot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/or2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/orient.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/plasmac.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sample_hold.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scaled_s32_sums.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scale.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/select8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_home_switch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_axis_hardware.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/simple_tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sphereprobe.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/steptest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/spindle_monitor.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sum2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/thc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/thcud.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/threadtest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/time.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/timedelay.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tof.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/timedelta.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/toggle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/toggle2nist.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ton.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tristate_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tristate_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/updown.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/userkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/wcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzab_tdr_kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xhc_hb04_util.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xor2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libpyplugin.so.0 ../lib/libpyplugin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/serport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_uart.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_7i65.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling objects/hal/user_comps/thermistor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/wj200_vfd/wj200_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/pi500_vfd/pi500_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking thermistor make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking wj200_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking pi500_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library libnml.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libnml.so.0 ../lib/libnml.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking motion-logger make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcncsvr make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' emc/tooldata/tool_watch.cc: In function 'int main(int, char**)': emc/tooldata/tool_watch.cc:56:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 56 | fprintf(stderr,"%8ld EMC_STAT\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:57:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 57 | fprintf(stderr,"%8ld EMC_IO_STAT\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:58:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 58 | fprintf(stderr,"%8ld EMC_TOOL_STAT\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:59:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 59 | fprintf(stderr,"%8ld EMC_COOLANT_STAT\n",sizeof(EMC_COOLANT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:60:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 60 | fprintf(stderr,"%8ld EMC_AUX_STAT\n",sizeof(EMC_AUX_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:61:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 61 | fprintf(stderr,"%8ld EMC_LUBE_STAT\n",sizeof(EMC_LUBE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:62:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 62 | fprintf(stderr,"%8ld EMC_TASK_STAT\n",sizeof(EMC_TASK_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:63:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 63 | fprintf(stderr,"%8ld EMC_MOTION_STAT\n",sizeof(EMC_MOTION_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:64:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 64 | fprintf(stderr,"%8ld EMC_TRAJ_STAT\n",sizeof(EMC_TRAJ_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:65:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 65 | fprintf(stderr,"%8ld EMC_JOINT_STAT\n",sizeof(EMC_JOINT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:66:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 66 | fprintf(stderr,"%8ld EMC_AXIS_STAT\n",sizeof(EMC_AXIS_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:67:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 67 | fprintf(stderr,"%8ld EMC_SPINDLE_STAT\n",sizeof(EMC_SPINDLE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnclcd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking io make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcncrsh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking iov2 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking librs274.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,librs274.so.0 -shared -o ../lib/librs274.so.0 objects/emc/rs274ngc/interp_arc.o objects/emc/rs274ngc/interp_array.o objects/emc/rs274ngc/interp_base.o objects/emc/rs274ngc/interp_check.o objects/emc/rs274ngc/interp_convert.o objects/emc/rs274ngc/interp_queue.o objects/emc/rs274ngc/interp_cycles.o objects/emc/rs274ngc/interp_execute.o objects/emc/rs274ngc/interp_find.o objects/emc/rs274ngc/interp_internal.o objects/emc/rs274ngc/interp_inverse.o objects/emc/rs274ngc/interp_read.o objects/emc/rs274ngc/interp_write.o objects/emc/rs274ngc/interp_o_word.o objects/emc/rs274ngc/interp_g7x.o objects/emc/rs274ngc/modal_state.o objects/emc/rs274ngc/nurbs_additional_functions.o objects/emc/rs274ngc/interp_namedparams.o objects/emc/rs274ngc/interp_python.o objects/emc/rs274ngc/interp_remap.o objects/emc/rs274ngc/interp_setup.o objects/emc/rs274ngc/canonmodule.o objects/emc/rs274ngc/pyparamclass.o objects/emc/rs274ngc/pyemctypes.o objects/emc/rs274ngc/pyinterp1.o objects/emc/rs274ngc/pyblock.o objects/emc/rs274ngc/pyarrays.o objects/emc/rs274ngc/interpmodule.o objects/emc/rs274ngc/rs274ngc_pre.o objects/emc/rs274ngc/interp_inspection.o ../lib/liblinuxcncini.so ../lib/libpyplugin.so ../lib/liblinuxcnchal.so.0 ../lib/libtooldata.so.0 -lstdc++ -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking schedrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf librs274.so.0 ../lib/librs274.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking canterp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module gcode.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/gcode.so objects/emc/rs274ngc/gcodemodule.o ../lib/librs274.so.0 -lstdc++ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking milltask c++ -std=gnu++17 -o ../bin/milltask objects/emc/motion/emcmotglb.o objects/emc/task/emctask.o objects/emc/task/emccanon.o objects/emc/task/emctaskmain.o objects/emc/motion/usrmotintf.o objects/emc/motion/emcmotutil.o objects/emc/task/taskintf.o objects/emc/motion/dbuf.o objects/emc/motion/stashf.o objects/emc/task/taskmodule.o objects/emc/task/taskclass.o objects/emc/task/backtrace.o ../lib/librs274.so.0 ../lib/liblinuxcnc.a ../lib/libnml.so.0 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/liblinuxcnchal.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking rs274 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' + popd ~/RPM/BUILD/linuxcnc-2.9.1 + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.16548 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/linuxcnc-buildroot + : + /bin/rm -rf -- /usr/src/tmp/linuxcnc-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/games + cd linuxcnc-2.9.1 + pushd src ~/RPM/BUILD/linuxcnc-2.9.1/src ~/RPM/BUILD/linuxcnc-2.9.1 + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/linuxcnc-buildroot make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/bin \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../rtlib/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules /usr/libexec/rpm-build/install -p -m 4755 ../bin/linuxcnc_module_helper /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 4755 ../bin/rtapi_app /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../scripts/rtapi.conf /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/src/tmp/linuxcnc-buildroot/usr/lib \ /usr/src/tmp/linuxcnc-buildroot/lib/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles \ /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/*.py ../lib/python/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/rs274/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/touchy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gscreen/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/*.{py,ui,txt} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/designer/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/widget_icons/*.{png,gif} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/plugins/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins cp -dR ../lib/python/qtvcp/lib/* /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gmoccapy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/*.{py,png,glade} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/stepconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pncconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pyui/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/plasmac/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0755 ../bin/stepconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pncconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_input /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mitsub_vfd /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mqtt-publisher /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/z_level_compensation /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pmx485 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/sim-torch /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gladevcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis-remote /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/debuglevel /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/linuxcnctop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mdi /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_manualtoolchange /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/image-to-gcode /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/touchy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gscreen /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../lib/python/qtvcp/designer/install_script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -m 0755 ../bin/gmoccapy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/teach-in /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/scorbot-er-3 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pumagui ../bin/puma560gui ../bin/lineardelta ../bin/scaragui ../bin/hexagui ../bin/5axisgui ../bin/max5gui ../bin/maho600gui ../bin/hbmgui ../bin/rotarydelta ../bin/melfagui ../bin/millturngui ../bin/xyzac-trt-gui ../bin/xyzbc-trt-gui ../bin/xyzab-tdr-gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtplasmac-materials ../bin/qtplasmac-plasmac2qt ../bin/qtplasmac-cfg2prefs ../bin/qtplasmac_gcode ../bin/pmx485-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/linuxcnc-wizard.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/images/*.{png,gif,xbm,ngc} /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/tcl/*.tcl /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl /usr/libexec/rpm-build/install -p -m 0644 ../share/gscreen/images/*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images cp -dR ../share/gscreen/skins/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins cp -dR ../share/qtvcp/images/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images cp -dR ../share/qtvcp/screens/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens cp -dR ../share/qtvcp/panels/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels cp -dR ../share/qtvcp/widgets_ui/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui cp -dR ../share/gmoccapy/icons/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man1/*.1 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/hal_add_funct_to_thread.3hal ../docs/man/man3/hal_bit_t.3hal ../docs/man/man3/hal_bool.3hal ../docs/man/man3/hal_create_thread.3hal ../docs/man/man3/hal_del_funct_from_thread.3hal ../docs/man/man3/hal_exit.3hal ../docs/man/man3/hal_export_funct.3hal ../docs/man/man3/hal_float_t.3hal ../docs/man/man3/hal_get_lock.3hal ../docs/man/man3/hal_init.3hal ../docs/man/man3/hal_link.3hal ../docs/man/man3/hal_malloc.3hal ../docs/man/man3/hal_param_alias.3hal ../docs/man/man3/hal_param_bit_new.3hal ../docs/man/man3/hal_param_bit_newf.3hal ../docs/man/man3/hal_param_float_new.3hal ../docs/man/man3/hal_param_float_newf.3hal ../docs/man/man3/hal_param_new.3hal ../docs/man/man3/hal_param_s32_new.3hal ../docs/man/man3/hal_param_s32_newf.3hal ../docs/man/man3/hal_param_u32_new.3hal ../docs/man/man3/hal_param_u32_newf.3hal ../docs/man/man3/hal_parport.3hal ../docs/man/man3/hal_pin_alias.3hal ../docs/man/man3/hal_pin_bit_new.3hal ../docs/man/man3/hal_pin_bit_newf.3hal ../docs/man/man3/hal_pin_float_new.3hal ../docs/man/man3/hal_pin_float_newf.3hal ../docs/man/man3/hal_pin_new.3hal ../docs/man/man3/hal_pin_port_new.3hal ../docs/man/man3/hal_pin_port_newf.3hal ../docs/man/man3/hal_pin_s32_new.3hal ../docs/man/man3/hal_pin_s32_newf.3hal ../docs/man/man3/hal_pin_u32_new.3hal ../docs/man/man3/hal_pin_u32_newf.3hal ../docs/man/man3/hal_port.3hal ../docs/man/man3/hal_ready.3hal ../docs/man/man3/hal_s32_t.3hal ../docs/man/man3/hal_set_constructor.3hal ../docs/man/man3/hal_set_lock.3hal ../docs/man/man3/hal_signal_delete.3hal ../docs/man/man3/hal_signal_new.3hal ../docs/man/man3/hal_start_threads.3hal ../docs/man/man3/hal_stream.3hal ../docs/man/man3/hal_type_t.3hal ../docs/man/man3/hal_u32_t.3hal ../docs/man/man3/hal_unlink.3hal ../docs/man/man3/intro.3hal ../docs/man/man3/undocumented.3hal /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/EXPORT_FUNCTION.3rtapi ../docs/man/man3/MODULE_AUTHOR.3rtapi ../docs/man/man3/MODULE_DESCRIPTION.3rtapi ../docs/man/man3/MODULE_LICENSE.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi ../docs/man/man3/RTAPI_MP_INT.3rtapi ../docs/man/man3/RTAPI_MP_LONG.3rtapi ../docs/man/man3/RTAPI_MP_STRING.3rtapi ../docs/man/man3/intro.3rtapi ../docs/man/man3/rtapi_app_exit.3rtapi ../docs/man/man3/rtapi_app_main.3rtapi ../docs/man/man3/rtapi_atomic.3rtapi ../docs/man/man3/rtapi_bool.3rtapi ../docs/man/man3/rtapi_byteorder.3rtapi ../docs/man/man3/rtapi_clock_set_period.3rtapi ../docs/man/man3/rtapi_delay.3rtapi ../docs/man/man3/rtapi_delay_max.3rtapi ../docs/man/man3/rtapi_device.3rtapi ../docs/man/man3/rtapi_div_u64.3rtapi ../docs/man/man3/rtapi_div_u64_rem.3rtapi ../docs/man/man3/rtapi_exit.3rtapi ../docs/man/man3/rtapi_firmware.3rtapi ../docs/man/man3/rtapi_get_clocks.3rtapi ../docs/man/man3/rtapi_get_msg_level.3rtapi ../docs/man/man3/rtapi_get_time.3rtapi ../docs/man/man3/rtapi_gfp.3rtapi ../docs/man/man3/rtapi_inb.3rtapi ../docs/man/man3/rtapi_init.3rtapi ../docs/man/man3/rtapi_io.3rtapi ../docs/man/man3/rtapi_is.3rtapi ../docs/man/man3/rtapi_list.3rtapi ../docs/man/man3/rtapi_module_param.3rtapi ../docs/man/man3/rtapi_mutex.3rtapi ../docs/man/man3/rtapi_open_as_root.3rtapi ../docs/man/man3/rtapi_outb.3rtapi ../docs/man/man3/rtapi_parport.3rtapi ../docs/man/man3/rtapi_pci.3rtapi ../docs/man/man3/rtapi_print.3rtapi ../docs/man/man3/rtapi_prio.3rtapi ../docs/man/man3/rtapi_prio_highest.3rtapi ../docs/man/man3/rtapi_prio_lowest.3rtapi ../docs/man/man3/rtapi_prio_next_higher.3rtapi ../docs/man/man3/rtapi_prio_next_lower.3rtapi ../docs/man/man3/rtapi_region.3rtapi ../docs/man/man3/rtapi_release_region.3rtapi ../docs/man/man3/rtapi_request_region.3rtapi ../docs/man/man3/rtapi_set_msg_level.3rtapi ../docs/man/man3/rtapi_shmem.3rtapi ../docs/man/man3/rtapi_shmem_delete.3rtapi ../docs/man/man3/rtapi_shmem_getptr.3rtapi ../docs/man/man3/rtapi_shmem_new.3rtapi ../docs/man/man3/rtapi_slab.3rtapi ../docs/man/man3/rtapi_snprintf.3rtapi ../docs/man/man3/rtapi_stdint.3rtapi ../docs/man/man3/rtapi_string.3rtapi ../docs/man/man3/rtapi_strlcpy.3rtapi ../docs/man/man3/rtapi_task_delete.3rtapi ../docs/man/man3/rtapi_task_new.3rtapi ../docs/man/man3/rtapi_task_pause.3rtapi ../docs/man/man3/rtapi_task_resume.3rtapi ../docs/man/man3/rtapi_task_self.3rtapi ../docs/man/man3/rtapi_task_start.3rtapi ../docs/man/man3/rtapi_task_wait.3rtapi ../docs/man/man3/undocumented.3rtapi /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man9/abs.9 ../docs/man/man9/abs_s32.9 ../docs/man/man9/and2.9 ../docs/man/man9/anglejog.9 ../docs/man/man9/at_pid.9 ../docs/man/man9/axis.9 ../docs/man/man9/axistest.9 ../docs/man/man9/bin2gray.9 ../docs/man/man9/biquad.9 ../docs/man/man9/bitslice.9 ../docs/man/man9/bitwise.9 ../docs/man/man9/bldc.9 ../docs/man/man9/blend.9 ../docs/man/man9/carousel.9 ../docs/man/man9/charge_pump.9 ../docs/man/man9/clarke2.9 ../docs/man/man9/clarke3.9 ../docs/man/man9/clarkeinv.9 ../docs/man/man9/classicladder.9 ../docs/man/man9/comp.9 ../docs/man/man9/constant.9 ../docs/man/man9/conv_bit_float.9 ../docs/man/man9/conv_bit_s32.9 ../docs/man/man9/conv_bit_u32.9 ../docs/man/man9/conv_float_s32.9 ../docs/man/man9/conv_float_u32.9 ../docs/man/man9/conv_s32_bit.9 ../docs/man/man9/conv_s32_float.9 ../docs/man/man9/conv_s32_u32.9 ../docs/man/man9/conv_u32_bit.9 ../docs/man/man9/conv_u32_float.9 ../docs/man/man9/conv_u32_s32.9 ../docs/man/man9/corexy_by_hal.9 ../docs/man/man9/counter.9 ../docs/man/man9/dbounce.9 ../docs/man/man9/ddt.9 ../docs/man/man9/deadzone.9 ../docs/man/man9/debounce.9 ../docs/man/man9/demux.9 ../docs/man/man9/differential.9 ../docs/man/man9/div2.9 ../docs/man/man9/edge.9 ../docs/man/man9/encoder.9 ../docs/man/man9/encoder_ratio.9 ../docs/man/man9/enum.9 ../docs/man/man9/eoffset_per_angle.9 ../docs/man/man9/estop_latch.9 ../docs/man/man9/feedcomp.9 ../docs/man/man9/filter_kalman.9 ../docs/man/man9/flipflop.9 ../docs/man/man9/gantry.9 ../docs/man/man9/gantrykins.9 ../docs/man/man9/gearchange.9 ../docs/man/man9/genhexkins.9 ../docs/man/man9/genserkins.9 ../docs/man/man9/gentrivkins.9 ../docs/man/man9/gladevcp.9 ../docs/man/man9/gray2bin.9 ../docs/man/man9/hal_bb_gpio.9 ../docs/man/man9/hal_parport.9 ../docs/man/man9/histobins.9 ../docs/man/man9/hm2_7i43.9 ../docs/man/man9/hm2_7i90.9 ../docs/man/man9/hm2_eth.9 ../docs/man/man9/hm2_pci.9 ../docs/man/man9/hm2_rpspi.9 ../docs/man/man9/hm2_spi.9 ../docs/man/man9/homecomp.9 ../docs/man/man9/hostmot2.9 ../docs/man/man9/hypot.9 ../docs/man/man9/ilowpass.9 ../docs/man/man9/integ.9 ../docs/man/man9/invert.9 ../docs/man/man9/joyhandle.9 ../docs/man/man9/kins.9 ../docs/man/man9/knob2float.9 ../docs/man/man9/latencybins.9 ../docs/man/man9/lcd.9 ../docs/man/man9/limit1.9 ../docs/man/man9/limit2.9 ../docs/man/man9/limit3.9 ../docs/man/man9/limit_axis.9 ../docs/man/man9/lincurve.9 ../docs/man/man9/lineardeltakins.9 ../docs/man/man9/logic.9 ../docs/man/man9/lowpass.9 ../docs/man/man9/lut5.9 ../docs/man/man9/maj3.9 ../docs/man/man9/match8.9 ../docs/man/man9/matrix_kb.9 ../docs/man/man9/max31855.9 ../docs/man/man9/maxkins.9 ../docs/man/man9/mesa_7i65.9 ../docs/man/man9/mesa_pktgyro_test.9 ../docs/man/man9/mesa_uart.9 ../docs/man/man9/message.9 ../docs/man/man9/millturn.9 ../docs/man/man9/minmax.9 ../docs/man/man9/motion.9 ../docs/man/man9/moveoff.9 ../docs/man/man9/mult2.9 ../docs/man/man9/multiclick.9 ../docs/man/man9/multiswitch.9 ../docs/man/man9/mux16.9 ../docs/man/man9/mux2.9 ../docs/man/man9/mux4.9 ../docs/man/man9/mux8.9 ../docs/man/man9/mux_generic.9 ../docs/man/man9/near.9 ../docs/man/man9/not.9 ../docs/man/man9/offset.9 ../docs/man/man9/ohmic.9 ../docs/man/man9/oneshot.9 ../docs/man/man9/opto_ac5.9 ../docs/man/man9/or2.9 ../docs/man/man9/orient.9 ../docs/man/man9/pentakins.9 ../docs/man/man9/pid.9 ../docs/man/man9/plasmac.9 ../docs/man/man9/pumakins.9 ../docs/man/man9/pwmgen.9 ../docs/man/man9/rosekins.9 ../docs/man/man9/rotatekins.9 ../docs/man/man9/sample_hold.9 ../docs/man/man9/sampler.9 ../docs/man/man9/scale.9 ../docs/man/man9/scaled_s32_sums.9 ../docs/man/man9/scarakins.9 ../docs/man/man9/select8.9 ../docs/man/man9/serport.9 ../docs/man/man9/setsserial.9 ../docs/man/man9/siggen.9 ../docs/man/man9/sim_axis_hardware.9 ../docs/man/man9/sim_encoder.9 ../docs/man/man9/sim_home_switch.9 ../docs/man/man9/sim_matrix_kb.9 ../docs/man/man9/sim_parport.9 ../docs/man/man9/sim_spindle.9 ../docs/man/man9/simple_tp.9 ../docs/man/man9/sphereprobe.9 ../docs/man/man9/spindle.9 ../docs/man/man9/spindle_monitor.9 ../docs/man/man9/sserial.9 ../docs/man/man9/stepgen.9 ../docs/man/man9/steptest.9 ../docs/man/man9/streamer.9 ../docs/man/man9/sum2.9 ../docs/man/man9/supply.9 ../docs/man/man9/thc.9 ../docs/man/man9/thcud.9 ../docs/man/man9/threads.9 ../docs/man/man9/threadtest.9 ../docs/man/man9/time.9 ../docs/man/man9/timedelay.9 ../docs/man/man9/timedelta.9 ../docs/man/man9/tof.9 ../docs/man/man9/toggle.9 ../docs/man/man9/toggle2nist.9 ../docs/man/man9/ton.9 ../docs/man/man9/tp.9 ../docs/man/man9/tpcomp.9 ../docs/man/man9/tripodkins.9 ../docs/man/man9/tristate_bit.9 ../docs/man/man9/tristate_float.9 ../docs/man/man9/trivkins.9 ../docs/man/man9/updown.9 ../docs/man/man9/userkins.9 ../docs/man/man9/watchdog.9 ../docs/man/man9/wcomp.9 ../docs/man/man9/weighted_sum.9 ../docs/man/man9/xhc_hb04_util.9 ../docs/man/man9/xor2.9 ../docs/man/man9/xyzab_tdr_kins.9 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 /usr/libexec/rpm-build/install -p -m 0644 objects/*.msg /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs /usr/libexec/rpm-build/install -p -m 0755 ../scripts/realtime /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halrun /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halcmd_twopass /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/haltcl /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/simulate_probe /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/sim_pin /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../*.png ../*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../lib/hallib/* /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -m 0644 ../tcl/*.png /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc # install all the sample configs, including subdirs (tar is required on debian systems, and common on others) /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs ((cd ../configs && tar --exclude CVS --exclude .cvsignore --exclude .gitignore -cf - .) | (cd /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs && tar -xf -)) /usr/libexec/rpm-build/install -p -m 0755 ../bin/inivar ../bin/halstreamer ../bin/halsampler ../bin/panelui ../bin/mb2hal ../bin/gs2_vfd ../bin/hy_gt_vfd ../bin/svd-ps_vfd ../bin/shuttle ../bin/xhc-hb04 ../bin/sendkeys ../bin/thermistor ../bin/vfs11_vfd ../bin/classicladder ../bin/halcmd ../bin/halrmt ../bin/halmeter ../bin/halscope ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../bin/vfdb_vfd ../bin/wj200_vfd ../bin/pi500_vfd ../bin/hy_vfd ../bin/xhc-whb04b-6 ../bin/linuxcncrsh ../bin/schedrmt ../bin/linuxcnclcd ../bin/halui ../bin/linuxcncsvr ../bin/milltask ../bin/io ../bin/iov2 ../bin/genserkins ../bin/rs274 ../bin/motion-logger ../bin/tool_mmap_read ../bin/tool_watch ../bin/tooledit ../bin/ngcgui ../bin/pyngcgui ../bin/gremlin_view ../bin/halshow /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_info /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/setup_designer /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_var /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/monitor-xhc-hb04 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-plot /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/moveoff_gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/hal-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/xhc-hb04-accels /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/pyvcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/gladevcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcncmkdesktop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/update_ini /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halreport /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/libnml.so.0 ../lib/liblinuxcnchal.so.0 ../lib/liblinuxcnc.a ../lib/librs274.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 /usr/src/tmp/linuxcnc-buildroot/usr/lib cp --no-dereference ../lib/liblinuxcnchal.so ../lib/liblinuxcncini.so ../lib/libnml.so ../lib/libposemath.so ../lib/libpyplugin.so ../lib/librs274.so ../lib/libtooldata.so /usr/src/tmp/linuxcnc-buildroot/usr/lib ldconfig /usr/src/tmp/linuxcnc-buildroot/usr/lib /bin/bash: line 1: ldconfig: command not found make: [Makefile:734: install-kernel-indep] Error 127 (ignored) /usr/libexec/rpm-build/install -p -m 0644 ../lib/linuxcnc/canterp.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../include/linuxcnc.h ../include/emcIniFile.hh ../include/iniaxis.hh ../include/inijoint.hh ../include/inispindle.hh ../include/initraj.hh ../include/inihal.hh ../include/cubic.h ../include/kinematics.h ../include/switchkins.h ../include/genhexkins.h ../include/genserkins.h ../include/pentakins.h ../include/pumakins.h ../include/tc.h ../include/tc_types.h ../include/tcq.h ../include/tp.h ../include/tp_types.h ../include/spherical_arc.h ../include/blendmath.h ../include/emcmotcfg.h ../include/motion.h ../include/homing.h ../include/simple_tp.h ../include/state_tag.h ../include/usrmotintf.h ../include/axis.h ../include/canon.hh ../include/canon_position.hh ../include/emctool.h ../include/emc.hh ../include/emc_nml.hh ../include/emccfg.h ../include/emcglb.h ../include/emcpos.h ../include/emcpose.h ../include/interp_return.hh ../include/interpl.hh ../include/motion_types.h ../include/debugflags.h ../include/interp_internal.hh ../include/interp_fwd.hh ../include/interp_base.hh ../include/modal_state.hh ../include/rs274ngc.hh ../include/saicanon.hh ../include/hal.h ../include/hal_parport.h ../include/hostmot2-serial.h ../include/locmem.hh ../include/memsem.hh ../include/phantom.hh ../include/physmem.hh ../include/recvn.h ../include/rem_msg.hh ../include/sendn.h ../include/shmem.hh ../include/tcpmem.hh ../include/cms.hh ../include/cms_aup.hh ../include/cms_cfg.hh ../include/cms_dup.hh ../include/cms_srv.hh ../include/cms_up.hh ../include/cms_user.hh ../include/cms_xup.hh ../include/cmsdiag.hh ../include/tcp_opts.hh ../include/tcp_srv.hh ../include/inifile.h ../include/inifile.hh ../include/linklist.hh ../include/cmd_msg.hh ../include/nml.hh ../include/nml_mod.hh ../include/nml_oi.hh ../include/nml_srv.hh ../include/nml_type.hh ../include/nmldiag.hh ../include/nmlmsg.hh ../include/stat_msg.hh ../include/_sem.h ../include/sem.hh ../include/_shm.h ../include/shm.hh ../include/_timer.h ../include/timer.hh ../include/posemath.h ../include/gotypes.h ../include/gomath.h ../include/sincos.h ../include/rcs.hh ../include/rcs_exit.hh ../include/rcs_print.hh ../include/rcsversion.h ../include/rtapi.h ../include/rtapi_app.h ../include/rtapi_atomic.h ../include/rtapi_bitops.h ../include/rtapi_bool.h ../include/rtapi_byteorder.h ../include/rtapi_device.h ../include/rtapi_firmware.h ../include/rtapi_gfp.h ../include/rtapi_io.h ../include/rtapi_limits.h ../include/rtapi_list.h ../include/rtapi_math.h ../include/rtapi_math_i386.h ../include/rtapi_math64.h ../include/rtapi_mutex.h ../include/rtapi_parport.h ../include/rtapi_pci.h ../include/rtapi_slab.h ../include/rtapi_stdint.h ../include/rtapi_ctype.h ../include/rtapi_errno.h ../include/rtapi_string.h ../include/rtapi_vsnprintf.h /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/ cp -dR ../nc_files/3D_Chips.html ../nc_files/3D_Chips.ngc ../nc_files/3D_Chips.pdf ../nc_files/3dtest.ngc ../nc_files/M101 ../nc_files/M102.c ../nc_files/arcspiral.ngc ../nc_files/b-index.ngc ../nc_files/cds.ngc ../nc_files/comp-g1.ngc ../nc_files/comp.ngc ../nc_files/comp311.ngc ../nc_files/comp311_2.ngc ../nc_files/cone.ngc ../nc_files/daisy.ngc ../nc_files/factorial.ngc ../nc_files/filtertest-gui.py ../nc_files/filtertest.py ../nc_files/flowsnake.ngc ../nc_files/flowsnake.py ../nc_files/g20sub.ngc ../nc_files/g76.ngc ../nc_files/g881.ngc ../nc_files/g881min.ngc ../nc_files/g882.ngc ../nc_files/gcmc_lib ../nc_files/gladevcp_lib ../nc_files/gmoccapy_2_tools_with_cutter_radius_compensation.ngc ../nc_files/gridprobe.ngc ../nc_files/hole-circle.ngc ../nc_files/holecircle.py ../nc_files/increment.ngc ../nc_files/involute.py ../nc_files/lathe-g76.ngc ../nc_files/lathe_g70_71_demo.ngc ../nc_files/lathe_g7x_face_boring.ngc ../nc_files/lathe_g7x_quadrants.ngc ../nc_files/lathe_pawn.ngc ../nc_files/lathecomp.ngc ../nc_files/m250.ngc ../nc_files/m61demo.ngc ../nc_files/m6demo.ngc ../nc_files/m6remap.ngc ../nc_files/m70m72-demo.ngc ../nc_files/m73-demo.ngc ../nc_files/m75.ngc ../nc_files/m76.ngc ../nc_files/macros ../nc_files/mmount.ngc ../nc_files/nestedcall.ngc ../nc_files/ngcgui_lib ../nc_files/offsets.ngc ../nc_files/orphans ../nc_files/plasmac ../nc_files/plasmatest.ngc ../nc_files/polar.ngc ../nc_files/probe ../nc_files/probe-hole.ngc ../nc_files/remap-subroutines ../nc_files/remap_lib ../nc_files/retval.ngc ../nc_files/roparams.ngc ../nc_files/skeleton.ngc ../nc_files/smartprobe.ngc ../nc_files/spiral.ngc ../nc_files/systems.ngc ../nc_files/testm6fail.ngc ../nc_files/threading.ngc ../nc_files/tool-length-probe.ngc ../nc_files/toplevel.ngc ../nc_files/tort.ngc ../nc_files/torus.png ../nc_files/touchoff.ngc ../nc_files/useful-subroutines.ngc ../nc_files/x-trim.ngc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0755 ../nc_files/M101 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0644 ../tcl/TkLinuxCNC /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/libexec/rpm-build/install -p -m 0644 Makefile.modinc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/linuxcnc.tcl ../tcl/ngcgui.tcl ../tcl/ngcgui_app.tcl ../tcl/ngcgui_ttt.tcl ../tcl/pkgIndex.tcl ../tcl/show_errors.tcl ../tcl/tklinuxcnc.tcl ../tcl/tooledit.tcl ../tcl/twopass.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/hal.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/linuxcnc.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/pkgIndex.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/bin/cbutton.tcl ../tcl/bin/emccalib.tcl ../tcl/bin/emcdebug.tcl ../tcl/bin/emctesting.tcl ../tcl/bin/emctuning.tcl ../tcl/bin/genedit.tcl ../tcl/bin/halconfig.tcl ../tcl/bin/halshow.tcl ../tcl/bin/pickconfig.tcl ../tcl/bin/tkbackplot.tcl ../tcl/bin/popimage /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin /usr/libexec/rpm-build/install -p -m 0644 ../tcl/scripts/balloon.tcl ../tcl/scripts/emchelp.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0755 ../tcl/scripts/Set_Coordinates.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/stepconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/touchy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen2.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/gmoccapy/gmoccapy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/pncconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gremlin_view.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/popupkeyboard.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc_big.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/hal_python.xml /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs/ /usr/libexec/rpm-build/install -p -m 0644 ../share/glade/pixmaps/hicolor/22x22/actions/widget*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions/ /usr/libexec/rpm-build/install -p -m 0644 ../share/gtksourceview-2.0/language-specs/*.lang /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs/ /usr/libexec/rpm-build/install -p -m 0644 ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ for d in ../share/applications/linuxcnc.desktop ../share/applications/linuxcnc-latency.desktop ../share/applications/linuxcnc-latency-histogram.desktop ../share/applications/linuxcnc-pncconf.desktop ../share/applications/linuxcnc-stepconf.desktop ; do \ /usr/libexec/rpm-build/install -p -m 0644 $d /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ ; \ done /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/README.adoc ../docs/INSTALL.adoc ../docs/AUTHORS /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/help/asciidoc-markup_es.adoc ../docs/help/rtfaults.adoc ../docs/help/rtfaults_es.adoc ../docs/help/tklinuxcnc.adoc /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/etc/axis_light_background /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/README /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/README.axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' + popd ~/RPM/BUILD/linuxcnc-2.9.1 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + cp debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + sed 's/Name=/Name=LinuxCNC /g' -i /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop + desktop-file-install --dir /usr/src/tmp/linuxcnc-buildroot/usr/share/applications --remove-key=Version --remove-category=X-CNC --remove-category=Utility /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc.desktop + cat + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps + convert linuxcncicon.png -resize 16x16 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps + convert linuxcncicon.png -resize 32x32 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps + convert linuxcncicon.png -resize 48x48 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps/linuxcncicon.png + pushd /usr/src/tmp/linuxcnc-buildroot/usr/share/man ~/tmp/linuxcnc-buildroot/usr/share/man ~/RPM/BUILD/linuxcnc-2.9.1 ++ find -name '*.?' + xz ./man9/xyzab_tdr_kins.9 ./man9/xor2.9 ./man9/xhc_hb04_util.9 ./man9/weighted_sum.9 ./man9/wcomp.9 ./man9/watchdog.9 ./man9/userkins.9 ./man9/updown.9 ./man9/trivkins.9 ./man9/tristate_float.9 ./man9/tristate_bit.9 ./man9/tripodkins.9 ./man9/tpcomp.9 ./man9/tp.9 ./man9/ton.9 ./man9/toggle2nist.9 ./man9/toggle.9 ./man9/tof.9 ./man9/timedelta.9 ./man9/timedelay.9 ./man9/time.9 ./man9/threadtest.9 ./man9/threads.9 ./man9/thcud.9 ./man9/thc.9 ./man9/supply.9 ./man9/sum2.9 ./man9/streamer.9 ./man9/steptest.9 ./man9/stepgen.9 ./man9/sserial.9 ./man9/spindle_monitor.9 ./man9/spindle.9 ./man9/sphereprobe.9 ./man9/simple_tp.9 ./man9/sim_spindle.9 ./man9/sim_parport.9 ./man9/sim_matrix_kb.9 ./man9/sim_home_switch.9 ./man9/sim_encoder.9 ./man9/sim_axis_hardware.9 ./man9/siggen.9 ./man9/setsserial.9 ./man9/serport.9 ./man9/select8.9 ./man9/scarakins.9 ./man9/scaled_s32_sums.9 ./man9/scale.9 ./man9/sampler.9 ./man9/sample_hold.9 ./man9/rotatekins.9 ./man9/rosekins.9 ./man9/pwmgen.9 ./man9/pumakins.9 ./man9/plasmac.9 ./man9/pid.9 ./man9/pentakins.9 ./man9/orient.9 ./man9/or2.9 ./man9/opto_ac5.9 ./man9/oneshot.9 ./man9/ohmic.9 ./man9/offset.9 ./man9/not.9 ./man9/near.9 ./man9/mux_generic.9 ./man9/mux8.9 ./man9/mux4.9 ./man9/mux2.9 ./man9/mux16.9 ./man9/multiswitch.9 ./man9/multiclick.9 ./man9/mult2.9 ./man9/moveoff.9 ./man9/motion.9 ./man9/minmax.9 ./man9/millturn.9 ./man9/message.9 ./man9/mesa_uart.9 ./man9/mesa_pktgyro_test.9 ./man9/mesa_7i65.9 ./man9/maxkins.9 ./man9/max31855.9 ./man9/matrix_kb.9 ./man9/match8.9 ./man9/maj3.9 ./man9/lut5.9 ./man9/lowpass.9 ./man9/logic.9 ./man9/lineardeltakins.9 ./man9/lincurve.9 ./man9/limit_axis.9 ./man9/limit3.9 ./man9/limit2.9 ./man9/limit1.9 ./man9/lcd.9 ./man9/latencybins.9 ./man9/knob2float.9 ./man9/kins.9 ./man9/joyhandle.9 ./man9/invert.9 ./man9/integ.9 ./man9/ilowpass.9 ./man9/hypot.9 ./man9/hostmot2.9 ./man9/homecomp.9 ./man9/hm2_spi.9 ./man9/hm2_rpspi.9 ./man9/hm2_pci.9 ./man9/hm2_eth.9 ./man9/hm2_7i90.9 ./man9/hm2_7i43.9 ./man9/histobins.9 ./man9/hal_parport.9 ./man9/hal_bb_gpio.9 ./man9/gray2bin.9 ./man9/gladevcp.9 ./man9/gentrivkins.9 ./man9/genserkins.9 ./man9/genhexkins.9 ./man9/gearchange.9 ./man9/gantrykins.9 ./man9/gantry.9 ./man9/flipflop.9 ./man9/filter_kalman.9 ./man9/feedcomp.9 ./man9/estop_latch.9 ./man9/eoffset_per_angle.9 ./man9/enum.9 ./man9/encoder_ratio.9 ./man9/encoder.9 ./man9/edge.9 ./man9/div2.9 ./man9/differential.9 ./man9/demux.9 ./man9/debounce.9 ./man9/deadzone.9 ./man9/ddt.9 ./man9/dbounce.9 ./man9/counter.9 ./man9/corexy_by_hal.9 ./man9/conv_u32_s32.9 ./man9/conv_u32_float.9 ./man9/conv_u32_bit.9 ./man9/conv_s32_u32.9 ./man9/conv_s32_float.9 ./man9/conv_s32_bit.9 ./man9/conv_float_u32.9 ./man9/conv_float_s32.9 ./man9/conv_bit_u32.9 ./man9/conv_bit_s32.9 ./man9/conv_bit_float.9 ./man9/constant.9 ./man9/comp.9 ./man9/classicladder.9 ./man9/clarkeinv.9 ./man9/clarke3.9 ./man9/clarke2.9 ./man9/charge_pump.9 ./man9/carousel.9 ./man9/blend.9 ./man9/bldc.9 ./man9/bitwise.9 ./man9/bitslice.9 ./man9/biquad.9 ./man9/bin2gray.9 ./man9/axistest.9 ./man9/axis.9 ./man9/at_pid.9 ./man9/anglejog.9 ./man9/and2.9 ./man9/abs_s32.9 ./man9/abs.9 ./man1/xyzbc-trt-gui.1 ./man1/xyzac-trt-gui.1 ./man1/xhc-whb04b-6.1 ./man1/xhc-hb04.1 ./man1/xhc-hb04-accels.1 ./man1/wj200_vfd.1 ./man1/vfs11_vfd.1 ./man1/vfdb_vfd.1 ./man1/update_ini.1 ./man1/touchy.1 ./man1/tooledit.1 ./man1/thermistor.1 ./man1/teach-in.1 ./man1/svd-ps_vfd.1 ./man1/stepconf.1 ./man1/simulate_probe.1 ./man1/sim_pin.1 ./man1/sim-torch.1 ./man1/shuttle.1 ./man1/sendkeys.1 ./man1/scorbot-er-3.1 ./man1/schedrmt.1 ./man1/scaragui.1 ./man1/rtapi_app.1 ./man1/rs274.1 ./man1/rotarydelta.1 ./man1/qtvcp.1 ./man1/qtplasmac-setup.1 ./man1/qtplasmac-plasmac2qt.1 ./man1/qtplasmac-materials.1 ./man1/qtplasmac-cfg2prefs.1 ./man1/pyvcp_demo.1 ./man1/pyvcp.1 ./man1/pyui.1 ./man1/pyngcgui.1 ./man1/pumagui.1 ./man1/puma560gui.1 ./man1/pncconf.1 ./man1/pmx485.1 ./man1/pmx485-test.1 ./man1/pi500_vfd.1 ./man1/panelui.1 ./man1/ngcgui.1 ./man1/mqtt-publisher.1 ./man1/moveoff_gui.1 ./man1/motion-logger.1 ./man1/monitor-xhc-hb04.1 ./man1/mitsub_vfd.1 ./man1/milltask.1 ./man1/mdro.1 ./man1/mdi.1 ./man1/mb2hal.1 ./man1/max5gui.1 ./man1/maho600gui.1 ./man1/linuxcnctop.1 ./man1/linuxcncsvr.1 ./man1/linuxcncrsh.1 ./man1/linuxcncmkdesktop.1 ./man1/linuxcnclcd.1 ./man1/linuxcnc_var.1 ./man1/linuxcnc_module_helper.1 ./man1/linuxcnc_info.1 ./man1/linuxcnc.1 ./man1/lineardelta.1 ./man1/latency-test.1 ./man1/latency-plot.1 ./man1/latency-histogram.1 ./man1/iov2.1 ./man1/iocontrol.1 ./man1/io.1 ./man1/inivar.1 ./man1/image-to-gcode.1 ./man1/hy_vfd.1 ./man1/hy_gt_vfd.1 ./man1/hexagui.1 ./man1/hbmgui.1 ./man1/halui.1 ./man1/haltcl.1 ./man1/halstreamer.1 ./man1/halshow.1 ./man1/halscope.1 ./man1/halsampler.1 ./man1/halrun.1 ./man1/halrmt.1 ./man1/halreport.1 ./man1/halmeter.1 ./man1/halcompile.1 ./man1/halcmd_twopass.1 ./man1/halcmd.1 ./man1/hal_manualtoolchange.1 ./man1/hal_input.1 ./man1/hal-histogram.1 ./man1/gscreen.1 ./man1/gs2_vfd.1 ./man1/gremlin_view.1 ./man1/gmoccapy.1 ./man1/gladevcp_demo.1 ./man1/gladevcp.1 ./man1/emccalib.1 ./man1/elbpcom.1 ./man1/debuglevel.1 ./man1/axis.1 ./man1/axis-remote.1 ./man1/5axisgui.1 + popd ~/RPM/BUILD/linuxcnc-2.9.1 + rm /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnc.a + /usr/lib/rpm/find-lang linuxcnc gmoccapy --output=linuxcnc.lang + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/linuxcnc-buildroot (auto) mode of './usr/bin/rtapi_app' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) mode of './usr/bin/linuxcnc_module_helper' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) Verifying and fixing files in /usr/src/tmp/linuxcnc-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) Checking contents of files in /usr/src/tmp/linuxcnc-buildroot/ (default) Compressing files in /usr/src/tmp/linuxcnc-buildroot (auto) removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' Adjusting library links in /usr/src/tmp/linuxcnc-buildroot ./lib: (from :0) ./usr/lib: (from :0) liblinuxcncini.so.0 -> liblinuxcncini.so.0 libposemath.so.0 -> libposemath.so.0 libnml.so.0 -> libnml.so.0 liblinuxcnchal.so.0 -> liblinuxcnchal.so.0 librs274.so.0 -> librs274.so.0 libpyplugin.so.0 -> libpyplugin.so.0 libtooldata.so.0 -> libtooldata.so.0 ./usr/lib/python3/site-packages/qtvcp/lib: (from :0) Verifying ELF objects in /usr/src/tmp/linuxcnc-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=relaxed) verify-elf: WARNING: ./usr/bin/motion-logger: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/rs274: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/milltask: uses non-LFS functions: fopen freopen stat verify-elf: WARNING: ./usr/bin/linuxcnclcd: uses non-LFS functions: fcntl lstat readdir verify-elf: WARNING: ./usr/bin/hy_vfd: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/vfdb_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halscope: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halrmt: uses non-LFS functions: fcntl fopen stat verify-elf: WARNING: ./usr/bin/halcmd: uses non-LFS functions: fcntl fopen readdir verify-elf: WARNING: ./usr/bin/classicladder: uses non-LFS functions: fcntl fopen open readdir verify-elf: WARNING: ./usr/bin/vfs11_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/sendkeys: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/xhc-hb04: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/shuttle: uses non-LFS functions: glob open verify-elf: WARNING: ./usr/bin/mb2hal: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halsampler: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/halstreamer: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/rtapi_app: uses non-LFS functions: __open_2 fopen mmap open setrlimit stat verify-elf: WARNING: ./usr/bin/linuxcnc_module_helper: uses non-LFS functions: readdir verify-elf: WARNING: ./usr/lib/libtooldata.so.0: uses non-LFS functions: fopen lseek mmap open verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_XOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_BOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_UOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_PROBE_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_MOTION_CONTROL_MODEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_SPEEDi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_BLOCK_DELETEb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16GET_BLOCK_DELETEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14IO_PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SPINDLE_RETRACTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_PLANEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10NURBS_FEEDiSt6vectorI13CONTROL_POINTSaIS0_EEj verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21GET_EXTERNAL_TC_FAULTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10UPDATE_TAG8StateTag verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15RELOAD_TOOLDATAv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23CLEAR_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10CLAMP_AXIS10CANON_AXIS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11LOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_PARAMETER_FILE_NAMEPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z4WAITiiid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_VOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12START_CHANGEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_COFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_TRAVERSE_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25SET_OPTIONAL_PROGRAM_STOPb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17GET_EXTERNAL_MISTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24SPINDLE_RETRACT_TRAVERSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z3LOGPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_ANALOG_INPUTid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z27GET_EXTERNAL_OFFSET_APPLIEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_FEED_HOLD_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PARAMETER_FILE_NAMEPci verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_OFFSETSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22SET_NAIVECAM_TOLERANCEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_LENGTH_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9RIGID_TAPidddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31STOP_CUTTER_RADIUS_COMPENSATIONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8LOGCLOSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_MODEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_FEED_OVERRIDE_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20CLEAR_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_AXIS_MASKv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13UNLOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G5X_OFFSETiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z6FINISHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_FEED_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_FLOODv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ON_RESETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_TRAVERSE_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G92_OFFSETddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31GET_EXTERNAL_SELECTED_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_DIGITAL_INPUTii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_SPINDLE_MODEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SET_XY_ROTATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7LOGOPENPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_ANGLE_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z46GET_EXTERNAL_MOTION_CONTROL_NAIVECAM_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_SPINDLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z36GET_EXTERNAL_SPINDLE_OVERRIDE_ENABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32START_CUTTER_RADIUS_COMPENSATIONi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_YOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30SET_CUTTER_RADIUS_COMPENSATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_WOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9LOGAPPENDPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17DISABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: USER_DEFINED_FUNCTION verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _task verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_AUX_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_AOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_QUEUE_EMPTYv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PROBE_TRIPPED_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: builtin_modules verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18CHANGE_TOOL_NUMBERi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_TOOL_TABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22USE_TOOL_LENGTH_OFFSET7EmcPose verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_ZOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21SET_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16ENABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_TOOL_TABLE_ENTRYii7EmcPosedddi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z37GET_EXTERNAL_MOTION_CONTROL_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_ADAPTIVE_FEED_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20USE_NO_SPINDLE_FORCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CANON_ERRORPKcz verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z28WAIT_SPINDLE_ORIENT_COMPLETEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TC_REASONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_LENGTH_UNIT_TYPEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/liblinuxcnchal.so.0: uses non-LFS functions: fopen stat verify-elf: WARNING: ./usr/lib/libnml.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/liblinuxcncini.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXDestroyContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryServerString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDeleteLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDrawBuffer verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryExtension verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXMakeCurrent verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glFlush verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGetString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXCreateContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXUseXFont verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGenLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXChooseVisual verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXGetConfig verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glViewport verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXSwapBuffers verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/linuxcnc.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/hal.so: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_destroy verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hm2_get_sserial verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_shmem_base verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_del_funct_from_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_detach verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_writable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_write verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_maxdepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitch verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_stop_threads verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpRunCycle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_allhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetMotionType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetCycleTime verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetTermCond verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsForward verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_index_enable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetRunDir verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: write_homing_out_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_sequence verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpActiveDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotData verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetSpindleSync verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_synchronized verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_cancel_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsInverse verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitchable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecTag verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_needs_unlock_first verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_is_active verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVlimit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddCircle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetDout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpIsDone verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpPause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpCreate verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddRigidTap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpResume verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homeMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_unhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tcqFull verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_idle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAbort verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_home_joint verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: read_homing_in_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpQueueDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddLine verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_at_index_search_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homing_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpClear verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_get_pktuart verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_tram_add_bspi_frame verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_allocate_bspi_tram verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_clear_fifo verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_setup_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_write_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_set_read_function verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_free verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_alias verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: uses non-LFS functions: open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: uses non-LFS functions: fopen mmap stat verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_task_self verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: uses non-LFS functions: fopen mmap open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_next_lower verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_vsnprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_pause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_start verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_clock_set_period verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_highest verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: uses non-LFS functions: mmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print Bytecompiling python3 modules in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py Bytecompiling python3 modules with optimization in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -O compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py Bytecompiling python3 modules with optimization-2 in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -OO compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py Hardlinking identical .pyc and .opt-?.pyc files './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/glnav.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/glnav.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hal.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/vismach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vismach.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-311.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-1.pyc' Processing files: linuxcnc-2.9.1-alt2.20231009 warning: File listed twice: /usr/lib/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/canterp.so warning: File listed twice: /usr/lib/linuxcnc/modules warning: File listed twice: /usr/lib/linuxcnc/modules/5axiskins.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/and2.so warning: File listed twice: /usr/lib/linuxcnc/modules/anglejog.so warning: File listed twice: /usr/lib/linuxcnc/modules/axistest.so warning: File listed twice: /usr/lib/linuxcnc/modules/bin2gray.so warning: File listed twice: /usr/lib/linuxcnc/modules/biquad.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitslice.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitwise.so warning: File listed twice: /usr/lib/linuxcnc/modules/bldc.so warning: File listed twice: /usr/lib/linuxcnc/modules/blend.so warning: File listed twice: /usr/lib/linuxcnc/modules/boss_plc.so warning: File listed twice: /usr/lib/linuxcnc/modules/carousel.so warning: File listed twice: /usr/lib/linuxcnc/modules/charge_pump.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke2.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke3.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarkeinv.so warning: File listed twice: /usr/lib/linuxcnc/modules/classicladder_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/comp.so warning: File listed twice: /usr/lib/linuxcnc/modules/constant.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexy_by_hal.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexykins.so warning: File listed twice: /usr/lib/linuxcnc/modules/counter.so warning: File listed twice: /usr/lib/linuxcnc/modules/dbounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/ddt.so warning: File listed twice: /usr/lib/linuxcnc/modules/deadzone.so warning: File listed twice: /usr/lib/linuxcnc/modules/debounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/demux.so warning: File listed twice: /usr/lib/linuxcnc/modules/differential.so warning: File listed twice: /usr/lib/linuxcnc/modules/div2.so warning: File listed twice: /usr/lib/linuxcnc/modules/edge.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder_ratio.so warning: File listed twice: /usr/lib/linuxcnc/modules/enum.so warning: File listed twice: /usr/lib/linuxcnc/modules/eoffset_per_angle.so warning: File listed twice: /usr/lib/linuxcnc/modules/estop_latch.so warning: File listed twice: /usr/lib/linuxcnc/modules/feedcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/filter_kalman.so warning: File listed twice: /usr/lib/linuxcnc/modules/flipflop.so warning: File listed twice: /usr/lib/linuxcnc/modules/gantry.so warning: File listed twice: /usr/lib/linuxcnc/modules/gearchange.so warning: File listed twice: /usr/lib/linuxcnc/modules/genhexkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/genserkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/gray2bin.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_bb_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_gm.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_lib.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_pi_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_ppmc.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_speaker.so warning: File listed twice: /usr/lib/linuxcnc/modules/histobins.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i43.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i90.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_eth.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_pci.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_rpspi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_spi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/homecomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/homemod.so warning: File listed twice: /usr/lib/linuxcnc/modules/hostmot2.so warning: File listed twice: /usr/lib/linuxcnc/modules/hypot.so warning: File listed twice: /usr/lib/linuxcnc/modules/ilowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/integ.so warning: File listed twice: /usr/lib/linuxcnc/modules/invert.so warning: File listed twice: /usr/lib/linuxcnc/modules/joyhandle.so warning: File listed twice: /usr/lib/linuxcnc/modules/knob2float.so warning: File listed twice: /usr/lib/linuxcnc/modules/latencybins.so warning: File listed twice: /usr/lib/linuxcnc/modules/lcd.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit1.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit2.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit3.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit_axis.so warning: File listed twice: /usr/lib/linuxcnc/modules/lincurve.so warning: File listed twice: /usr/lib/linuxcnc/modules/lineardeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/modules/logic.so warning: File listed twice: /usr/lib/linuxcnc/modules/lowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/lut5.so warning: File listed twice: /usr/lib/linuxcnc/modules/maj3.so warning: File listed twice: /usr/lib/linuxcnc/modules/match8.so warning: File listed twice: /usr/lib/linuxcnc/modules/matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/max31855.so warning: File listed twice: /usr/lib/linuxcnc/modules/maxkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_7i65.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_uart.so warning: File listed twice: /usr/lib/linuxcnc/modules/message.so warning: File listed twice: /usr/lib/linuxcnc/modules/millturn.so warning: File listed twice: /usr/lib/linuxcnc/modules/minmax.so warning: File listed twice: /usr/lib/linuxcnc/modules/modmath.so warning: File listed twice: /usr/lib/linuxcnc/modules/motmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/moveoff.so warning: File listed twice: /usr/lib/linuxcnc/modules/mult2.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiclick.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiswitch.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux16.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux2.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux4.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux8.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux_generic.so warning: File listed twice: /usr/lib/linuxcnc/modules/near.so warning: File listed twice: /usr/lib/linuxcnc/modules/not.so warning: File listed twice: /usr/lib/linuxcnc/modules/offset.so warning: File listed twice: /usr/lib/linuxcnc/modules/ohmic.so warning: File listed twice: /usr/lib/linuxcnc/modules/oneshot.so warning: File listed twice: /usr/lib/linuxcnc/modules/or2.so warning: File listed twice: /usr/lib/linuxcnc/modules/orient.so warning: File listed twice: /usr/lib/linuxcnc/modules/pentakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pid.so warning: File listed twice: /usr/lib/linuxcnc/modules/plasmac.so warning: File listed twice: /usr/lib/linuxcnc/modules/pumakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pwmgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/rosekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotarydeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotatekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/sample_hold.so warning: File listed twice: /usr/lib/linuxcnc/modules/sampler.so warning: File listed twice: /usr/lib/linuxcnc/modules/scale.so warning: File listed twice: /usr/lib/linuxcnc/modules/scaled_s32_sums.so warning: File listed twice: /usr/lib/linuxcnc/modules/scarakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/scope_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/scorbot-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/select8.so warning: File listed twice: /usr/lib/linuxcnc/modules/serport.so warning: File listed twice: /usr/lib/linuxcnc/modules/setsserial.so warning: File listed twice: /usr/lib/linuxcnc/modules/siggen.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_axis_hardware.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_home_switch.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/simple_tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/sphereprobe.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle_monitor.so warning: File listed twice: /usr/lib/linuxcnc/modules/stepgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/steptest.so warning: File listed twice: /usr/lib/linuxcnc/modules/streamer.so warning: File listed twice: /usr/lib/linuxcnc/modules/sum2.so warning: File listed twice: /usr/lib/linuxcnc/modules/supply.so warning: File listed twice: /usr/lib/linuxcnc/modules/thc.so warning: File listed twice: /usr/lib/linuxcnc/modules/thcud.so warning: File listed twice: /usr/lib/linuxcnc/modules/threads.so warning: File listed twice: /usr/lib/linuxcnc/modules/threadtest.so warning: File listed twice: /usr/lib/linuxcnc/modules/time.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelay.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelta.so warning: File listed twice: /usr/lib/linuxcnc/modules/tof.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle2nist.so warning: File listed twice: /usr/lib/linuxcnc/modules/ton.so warning: File listed twice: /usr/lib/linuxcnc/modules/tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/tpmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/tripodkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/trivkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/updown.so warning: File listed twice: /usr/lib/linuxcnc/modules/userkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/watchdog.so warning: File listed twice: /usr/lib/linuxcnc/modules/wcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/weighted_sum.so warning: File listed twice: /usr/lib/linuxcnc/modules/xhc_hb04_util.so warning: File listed twice: /usr/lib/linuxcnc/modules/xor2.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/realtime Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.iLwqmA find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py provides python3(screens.x1mill.x1mill_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py provides python3(screens.woodpecker.woodpecker_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py provides python3(screens.tester.tester_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py provides python3(screens.qttouchy.qttouchy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py provides python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py provides python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py provides python3(screens.qtplasmac.qtplasmac_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py provides python3(screens.qtplasmac.languages.qtplasmac)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py provides python3(screens.qtlathe.qtlathe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py provides python3(screens.qtdragon_hd.qtdragon_hd_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py provides python3(screens.qtdragon.qtdragon_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py provides python3(screens.qtaxis.qtaxis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py provides python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py provides python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py provides python3(screens.qt_cnc.qt_cnc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py provides python3(screens.blender.blender_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py provides python3(panels.vismach_scara.vismach_scara_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py provides python3(panels.vismach_router_atc.vismach_router_atc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py provides python3(panels.vismach_millturn.vismach_millturn_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py provides python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py provides python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py provides python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py provides python3(panels.versaprobe.versaprobe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py provides python3(panels.tool_dialog.tool_dialog_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py provides python3(panels.test_probe.test_probe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py provides python3(panels.test_panel.test_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py provides python3(panels.test_led.test_led_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py provides python3(panels.test_dial.test_dial_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py provides python3(panels.test_button.test_button_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py provides python3(panels.spindle_belts.spindle_belts_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py provides python3(panels.sim_panel.sim_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py provides python3(panels.qtplasmac_sim.qtplasmac_sim_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py provides python3(panels.copy.copy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py provides python3(panels.cam_align.cam_align_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py provides python3(involute)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py provides python3(holecircle)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py provides python3(flowsnake)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py provides python3(filtertest)(under non-std path /usr/share/linuxcnc/ncfiles) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.5Un1Zy find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gcode.so: underlinked libraries: /usr/lib/libpython3.11.so.1.0 lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/linuxcnc.so: underlinked libraries: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0 python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "atexit" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "errno" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "_thread" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "gcode" lines:[59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.OpenGLTk" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.interpret" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hershey" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "propertywindow" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.options" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "nf" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "bwidget" lines:[69] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "linuxcnc" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "glnav" lines:[72] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hal" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "subprocess" lines:[[1113], [[3960]], [4032]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "webbrowser" lines:[[[2086]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "vcpparse" lines:[[[3924]], [[[4047]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "_thread" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "linuxcnc" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "time" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "rs274.options" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: skipping "sys" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "hal" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.makepins" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.gladebuilder" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.core" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal_glib" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "sys" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "atexit" lines:[42] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "linuxcnc" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "time" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "qtvcp" lines:[[5723]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.makepins" lines:[[5745]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.combi_dro" lines:[[5746]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gmoccapy" lines:[[5747, 5748, 5749, 5750, 5751, 5752], [[5754]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gremlin_view: "gremlin_view" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "qtvcp" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal" lines:[92] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "errno" lines:[93] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gladevcp.makepins" lines:[94] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "atexit" lines:[96] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "time" lines:[97, 98] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal_glib" lines:[99] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "linuxcnc" lines:[197] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gscreen" lines:[198, 199, 200, 201] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gi.repository" lines:[[119], [131], [141]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "distro" lines:[[[165]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "inspect" lines:[[[889]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "collections" lines:[[[890]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "subprocess" lines:[[[3941]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "linux_event" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "hal" lines:[22, 28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "nf" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "rs274.options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "sys" lines:[22, 402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "time" lines:[402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "hal" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: skipping "sys" lines:[12] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.author" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.options" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "PIL" lines:[[29], [[502]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "Image" lines:[[[31]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter" lines:[[499], [[757]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "pickle" lines:[[506]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "nf" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "ImageTk" lines:[[[[504]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter.filedialog" lines:[[[758]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "vismach" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "lineardeltakins" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "linuxcnc" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "rs274.options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "tkinter" lines:[[122]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "_tkinter" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "vismach" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "hal" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "getopt" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "sys" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/modcompile: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "time" lines:[31] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "hal" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "linuxcnc" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "paho.mqtt.client" lines:[[[[53]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "optparse" lines:[[[118]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "time" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial.tools.list_ports" lines:[[32]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "errno" lines:[38] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "copy" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "multifilebuilder" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "touchy" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "pncconf" lines:[54, 55, 56, 57, 58, 59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "hal" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "vismach" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "hal" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyngcgui: "pyngcgui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyui: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: skipping "sys" lines:[37] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "vcpparse" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "hal" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: "json" lines:[[[[[[336]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "tkinter" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtCore" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtGui" lines:[[39]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtWidgets" lines:[[40]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebEngineWidgets" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebKitWidgets" lines:[[[[18]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp" lines:[[[117]], [523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "linuxcnc" lines:[[[[152]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.lib" lines:[[[[[329]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.core" lines:[[[450]], [543]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "rotarydeltakins" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: skipping "sys" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "vismach" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: "hal" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "hal" lines:[35, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "errno" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "time" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "multifilebuilder" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "stepconf" lines:[116, 117, 118] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "defusedexpat" lines:[[47]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "xml.parsers" lines:[[[49]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "sys" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "atexit" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "time" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "linuxcnc" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "touchy" lines:[62, 63, 64, 65, 66, 67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "subprocess" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "datetime" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "vismach" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "hal" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "linuxcnc" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "scipy.interpolate" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py: "sys" lines:[[112]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py: skipping "sys" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "gladevcp.hal_pythonplugin" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "importlib" lines:[[4]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "linuxcnc" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "hal_glib" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "gladevcp.gtk_action" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "linuxcnc" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "qtvcp" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "hal" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "gladevcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "sys" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "time" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "atexit" lines:[829] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "subprocess" lines:[[[601], [617]], [[838]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp.core" lines:[[915]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.core" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "gladevcp.hal_widgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "gladevcp.hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "atexit" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_actions" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "subprocess" lines:[[[37]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "hal_widgets" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "linuxcnc" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gremlin" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "rs274.glcanon" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gcode" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_glib" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_actions" lines:[[41]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gladevcp.hal_actions" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "subprocess" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gremlin_view" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gladevcp" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "hal_widgets" lines:[[46]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "gladevcp.hal_widgets" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_glib" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.core" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_actions" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_actions" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "gladevcp.hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "pyngcgui" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "gladevcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_widgets" lines:[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.status_label" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.state_label" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.led" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.calculatorwidget" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.tooledit_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.drowidget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.iconview" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.combi_dro" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetwidget" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetpage_widget" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_bar" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_meter" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_graph" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_lightbutton" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.overridewidget" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.jogwheel" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.speedcontrol" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_dial" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_actions" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_filechooser" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_sourceview" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_mdihistory" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.macro_widget" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_pyngcgui" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin_plus" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "linuxcnc" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "hal_glib" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_widgets" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_actions" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_filechooser" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "os" lines:[[299]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "tempfile" lines:[[299]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py: "hal" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py: "qtvcp" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "gladevcp.hal_widgets" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "hal_widgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "gladevcp.hal_widgets" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_actions" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_actions" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.gladebuilder" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.hal_widgets" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.led" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "hal_glib" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.gladebuilder" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_widgets" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_actions" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "gladevcp.hal_widgets" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_widgets" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "gladevcp.hal_widgets" lines:[[26]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_widgets" lines:[[23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "gladevcp.hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib" lines:[[16], [73]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.xobject" lines:[[17], [74]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.protocol" lines:[[72]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py: "gladevcp.makepins" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "itertools" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi" lines:[[9]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi.repository" lines:[[12, 13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "cairo" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py: "gladevcp" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "qtvcp" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "gmoccapy" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "icon_theme_helper" lines:[[[40]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "gi.repository" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "sys" lines:[46] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "glnav" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.interpret" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "linuxcnc" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "gcode" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "time" lines:[68] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "_thread" lines:[74] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib.display" lines:[[56]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "sys" lines:[80] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "gladevcp.hal_actions" lines:[81] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "linuxcnc" lines:[82] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "time" lines:[83] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "getopt" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py: "_hal" lines:[30, 31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "_hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "sys" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "time" lines:[8] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: "configparser" lines:[[[1960]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: "linuxcnc" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: skipping "sys" lines:[57] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: skipping "sys" lines:[62] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "linuxcnc" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "hal" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp" lines:[74] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp.hal_filechooser" lines:[[212]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gi.repository.GdkPixbuf" lines:[[456]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[[[[2987]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "glib" lines:[[[[2988]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "hal" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[[[35]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "zmq" lines:[[[[[[94]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "sys" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "hal" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "bwidget" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "time" lines:[55] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "vcpparse" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.dom.minidom" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.parsers.expat" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "rs274.options" lines:[[[1745]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "_thread" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "glnav" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "rs274" lines:[31, 32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "gcode" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp.widgets.fake_status" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "PyQt5.QtOpenGL" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "OpenGL" lines:[[22, 23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_pstat" lines:[286] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_action" lines:[300] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_tstat" lines:[316] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp.core" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi" lines:[[31], [279]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi.repository" lines:[[33], [280]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "espeak" lines:[[54]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "queue" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "distro" lines:[[[[98]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: skipping "time" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/colored_formatter.py: "logging" lines:[[116]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "atexit" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "linuxcnc" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "atexit" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "linuxcnc" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "atexit" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.qt_makegui" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.lib" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp.core" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "hal" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "sys" lines:[[189]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "PyQt5.QtCore" lines:[[190]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.lib" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "gladevcp.hal_filechooser" lines:[[879]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "popplerqt5" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/mill_xyz.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: skipping "itertools" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi.repository" lines:[[13, 14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "cairo" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: "qtvcp.lib.qt_vismach.primitives" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: skipping "plasmac" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.lib.qtplasmac" lines:[29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py: "cv2" lines:[[[270]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: skipping "sys" lines:[97] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter" lines:[[101]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.filedialog" lines:[[102]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.messagebox" lines:[[103]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "Tkinter" lines:[[105]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFileDialog" lines:[[106]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkMessageBox" lines:[[107]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "psyco" lines:[[114]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFont" lines:[[[6408]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.font" lines:[[[[6411]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "dbus.mainloop.pyqt5" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "sys" lines:[[255]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "PyQt5.QtCore" lines:[[256]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.qt_makegui" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.lib.aux_program_loader" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "qtvcp" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "hal_glib" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py: skipping "time" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.lib.writer.ext" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib" lines:[[[26]], [51]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.xobject" lines:[[[27]], [52]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.protocol" lines:[[50]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "qtvcp.lib.colored_formatter" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button_round" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.richtext_selector" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.basic_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.camview_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.container_widgets" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.detach_tabs" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.gcode_graphics" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.hal_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.jog_increments" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.joypad" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.led_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.nurbs_editor" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.overlay_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.simplewidgets_plugin" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.led_plugin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.hal_label_plugin" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.detach_tabs_plugin" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_progress_bar_plugin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.joypad_plugin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.nurbs_editor_plugin" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.web_widget_plugin" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.container_plugin" lines:[37, 38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.graphics_plugin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.widgets_plugin" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_led_plugin" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_label_plugin" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_label_plugin" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.actionbutton_plugin" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.dialog_plugin" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.overlay_plugin" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_slider_plugin" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_adjustment_bar_plugin" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.screenoptions_plugin" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.jogincrements_plugin" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.camview_plugin" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.toolbutton_plugin" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.versa_probe_plugin" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.basic_probe_plugin" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.tab_widget_plugin" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.virtualkeyboard_plugin" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_gauge_plugin" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.bar_plugin" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.round_gauge" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.round_progress" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.screen_options" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.simple_widgets" lines:[5, 6, 7, 8, 9, 10, 11, 12, 13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_output" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_input" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.xembed" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.radio_axis_selector" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.axis_tool_button" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.offset_tool_button" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.file_manager" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.image_switcher" lines:[21, 22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.machine_log" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.state_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.state_led" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.adjustment_bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.richtext_selector" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.status_label" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.status_slider" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.tab_widget" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.system_tool_button" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.action_tool_button" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.versa_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.virtualkeyboard" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.web_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.dro_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_line" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_history" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_touchy" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.gcode_editor" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.geditor" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.status_stacked" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.widget_switcher" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.origin_offsetview" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.tool_offsetview" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.macro_widget" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "linuxcnc" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "sys" lines:[1057] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "atexit" lines:[1058] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "subprocess" lines:[[[650], [666]], [[1067]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[[1147]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "importlib" lines:[[[[[190]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "resources" lines:[[[[[[191]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.screen_options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "qtvcp" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.simple_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.lib.aux_program_loader" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "sys" lines:[[1580]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "PyQt5.QtWidgets" lines:[[1581]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "qtvcp.widgets.action_button" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "sys" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "PyQt5.QtWidgets" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "sys" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "PyQt5.QtWidgets" lines:[[83]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.lib.aux_program_loader" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "sys" lines:[[390]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "PyQt5.QtWidgets" lines:[[391]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "hal" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "sys" lines:[[292]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "PyQt5.QtWidgets" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp.widgets.widget_baseclass" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "hal" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "PyQt5.QtCore" lines:[[7], [[10]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.dialogMixin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtWidgets" lines:[[459]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtCore" lines:[[460]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtGui" lines:[[461]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "qtvcp.core" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "sys" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: skipping "_thread" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.widgets.widget_baseclass" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.core" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "cv2" lines:[[45]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "sys" lines:[[504]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py: "sys" lines:[[359]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp.widgets.widget_baseclass" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.widget_baseclass" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.origin_offsetview" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.tool_offsetview" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.macro_widget" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.versa_probe" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.entry_widget" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.virtualkeyboard" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.calculator" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.machine_log" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.lib.notify" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.dialogMixin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.camview_widget" lines:[[[984]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "sys" lines:[[1925]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "PyQt5.QtWidgets" lines:[[1926]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "sys" lines:[[326]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "PyQt5.QtWidgets" lines:[[327]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "sys" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "PyQt5.QtWidgets" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.widgets.widget_baseclass" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "sys" lines:[[556]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.widgets.widget_baseclass" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.core" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.Qsci" lines:[[58]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtWidgets" lines:[[1137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtCore" lines:[[1138]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtGui" lines:[[1139]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qt5_graphics" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.widgets.widget_baseclass" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.core" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "sys" lines:[[511]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "PyQt5.QtWidgets" lines:[[512]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.gcode_editor" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.widget_baseclass" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtWidgets" lines:[[523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtCore" lines:[[524]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtGui" lines:[[525]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.widget_baseclass" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "sys" lines:[[216]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "PyQt5.QtWidgets" lines:[[217]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "sys" lines:[[375]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "PyQt5.QtWidgets" lines:[[376]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "sys" lines:[[195]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "qtvcp.widgets.widget_baseclass" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtCore" lines:[[22], [[25]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "sys" lines:[[655]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtWidgets" lines:[[656]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "sys" lines:[[242]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "PyQt5.QtWidgets" lines:[[243]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "sys" lines:[[133]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "PyQt5.QtWidgets" lines:[[134]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.entry_widget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.touchEntry" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "PyQt5" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "sys" lines:[[664]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.mdi_line" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtWidgets" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtCore" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtGui" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "sys" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: skipping "time" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.widgets.entry_widget" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.lib.aux_program_loader" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "sys" lines:[[330]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "PyQt5.QtWidgets" lines:[[331]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtWidgets" lines:[[393]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtCore" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtGui" lines:[[395]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "sys" lines:[[396]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: skipping "sys" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "gcode" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qt5_graphics" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp.core" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "sys" lines:[[202]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "PyQt5.QtWidgets" lines:[[203]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "PyQt5.QtWidgets" lines:[[516]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "sys" lines:[[387]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtWidgets" lines:[[388]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtCore" lines:[[389]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "time" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.widgets.probe_routines" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.widgets.widget_baseclass" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "sys" lines:[[64]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "PyQt5.QtWidgets" lines:[[65]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: skipping "sys" lines:[10] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "sys" lines:[[318]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "PyQt5.QtWidgets" lines:[[319]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "sys" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "PyQt5.QtWidgets" lines:[[294]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtWidgets" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtCore" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtGui" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "linuxcnc" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.xembed" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.message" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.notify" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.audio_player" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.preferences" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.machine_log" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "zmq" lines:[[[61]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "json" lines:[[[67]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[[[[[403]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.dialog_widget" lines:[[[511], [526], [536], [544], [552], [561], [580], [588], [597], [605], [613], [621], [630], [638], [646]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.overlay_widget" lines:[[[569]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.lib.aux_program_loader" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.core" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.simple_widgets" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "sys" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.widgets.led_widget" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "sys" lines:[[558]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "PyQt5.QtGui" lines:[[559]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.simple_widgets" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtWidgets" lines:[[785]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtCore" lines:[[786]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtGui" lines:[[787]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "sys" lines:[[789]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.core" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.qt_makegui" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.dialog_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "sys" lines:[[123]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "PyQt5.QtWidgets" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "PyQt5.QtWidgets" lines:[[587]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtWidgets" lines:[[268]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtCore" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtGui" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "sys" lines:[[271]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.widget_baseclass" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.dialogMixin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtWidgets" lines:[[593]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtCore" lines:[[594]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtGui" lines:[[595]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtWidgets" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtCore" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtGui" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebEngineWidgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebKitWidgets" lines:[[[[17]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.widgets.widget_baseclass" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.lib" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "PyQt5.QtWidgets" lines:[[137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "_togl" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "glnav" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "tkinter.dialog" lines:[[[209]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py: "rs274.interpret" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "rs274" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "itertools" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "glnav" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "hershey" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "gcode" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py: "gcode" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: "nf" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: skipping "sys" lines:[167] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: "configparser" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: skipping "sys" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: "stepconf" lines:[[[[221]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py: skipping "__main__" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py: "hal" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "pyvcp_widgets" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "rs274.OpenGLTk" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "hal" lines:[18, 25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "glnav" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "tkinter" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "pickle" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "nf" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "rs274.options" lines:[[13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "os" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py: "stdglue" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py: "remap" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: "qtvcp.widgets.file_manager" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "hal" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.core" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.lib.preferences" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.simple_widgets" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.simple_widgets" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.led_widget" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.widgets.dialog_widget" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.dialog_widget" lines:[11, 12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.nurbs_editor" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.toolbar_actions" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.core" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.keybindings" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.aux_program_loader" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.notify" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.dialog_widget" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.preferences" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.overlay_widget" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.tool_offsetview" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.dialog_widget" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.notify" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.geditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.status_label" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.state_led" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.bar" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.writer" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.keybindings" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcodes" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[13] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[279]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[290]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[284]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[441]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[446]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.auto_height.auto_height" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.writer" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcodes" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.aux_program_loader" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[438]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[443]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[454]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[458]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[463]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.gcode_editor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.file_manager" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.gcodes" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.action_button" lines:[5666] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.axis_tool_button" lines:[5667] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.camview_widget" lines:[5668] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.dro_widget" lines:[5669] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.file_manager" lines:[5670] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_editor" lines:[5671] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_graphics" lines:[5672] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.hal_label" lines:[5673] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.jog_increments" lines:[5674] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.led_widget" lines:[5675] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.machine_log" lines:[5676] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.mdi_history" lines:[5677] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.screen_options" lines:[5678] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.simple_widgets" lines:[5679] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_label" lines:[5680] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_slider" lines:[5681] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.system_tool_button" lines:[5682] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "hal" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.gcode_editor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.mdi_line" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.tool_offsetview" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.file_manager" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.writer" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcodes" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.simple_widgets" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[229]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[233]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[[[239]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[422]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[427]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.toolbar_actions" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py is not executable /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: `source [file join $::env(HALLIB_DIR) hal_procs_lib.tcl]' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: ` } else {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage is ${LINUXCNC_EMCSH-wish} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: invalid command: ${LINUXCNC_EMCSH-wish} /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: `if ([info exists env(LANG)]) {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl is ${LINUXCNC_EMCSH-emcsh} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: invalid command: ${LINUXCNC_EMCSH-emcsh} shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: /usr/scripts/rip-environment -> /usr/scripts/rip-environment (raw, not installed) shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: invalid command: -v ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' --- find-requires-deps 2023-11-04 07:41:29.748732023 +0000 +++ filter-requires-deps 2023-11-04 07:41:29.750732052 +0000 @@ -24,3 +24,3 @@ /usr/lib/python3/site-packages -/usr/scripts/rip-environment + coreutils @@ -182,3 +182,3 @@ tk -typelib(Cairo) + typelib(GLib) find-requires: FINDPACKAGE-COMMANDS: awk basename cat clear cp cut date dirname gcc git grep head ipcrm ln lsb_release mkdir mktemp ps pylupdate5 python3 readlink rm sleep sudo tclsh touch tty uname uptime wc wish xdpyinfo Provides: python3(_hal), python3(_togl), python3(bitfile), python3(bwidget), python3(filtertest) = set:edp3, python3(flowsnake) = set:edp3, python3(gcode), python3(gladevcp), python3(gladevcp.calculatorwidget), python3(gladevcp.combi_dro), python3(gladevcp.core), python3(gladevcp.drowidget), python3(gladevcp.gladebuilder), python3(gladevcp.gtk_action), python3(gladevcp.hal_actions), python3(gladevcp.hal_bar), python3(gladevcp.hal_dial), python3(gladevcp.hal_filechooser), python3(gladevcp.hal_graph), python3(gladevcp.hal_gremlin), python3(gladevcp.hal_gremlin_plus), python3(gladevcp.hal_lightbutton), python3(gladevcp.hal_mdihistory), python3(gladevcp.hal_meter), python3(gladevcp.hal_pyngcgui), python3(gladevcp.hal_pythonplugin), python3(gladevcp.hal_sourceview), python3(gladevcp.hal_widgets), python3(gladevcp.iconview), python3(gladevcp.jogwheel), python3(gladevcp.led), python3(gladevcp.macro_widget), python3(gladevcp.makepins), python3(gladevcp.offsetpage_widget), python3(gladevcp.offsetwidget), python3(gladevcp.overridewidget), python3(gladevcp.persistence), python3(gladevcp.speedcontrol), python3(gladevcp.state_label), python3(gladevcp.status_label), python3(gladevcp.tooledit_widget), python3(gladevcp.xembed), python3(gladevcp_makepins), python3(glnav), python3(gmoccapy), python3(gmoccapy.dialogs), python3(gmoccapy.getiniinfo), python3(gmoccapy.icon_theme_helper), python3(gmoccapy.notification), python3(gmoccapy.player), python3(gmoccapy.preferences), python3(gmoccapy.widgets), python3(gremlin), python3(gremlin_view), python3(gscreen), python3(gscreen.emc_interface), python3(gscreen.keybindings), python3(gscreen.mdi), python3(gscreen.preferences), python3(hal), python3(hal_glib), python3(hershey), python3(holecircle) = set:edp3, python3(involute) = set:edp3, python3(lineardeltakins), python3(linux_event), python3(linuxcnc), python3(linuxcnc_util), python3(multifilebuilder), python3(nf), python3(panels.cam_align.cam_align_handler) = set:ed3l, python3(panels.copy.copy_handler) = set:ed3l, python3(panels.qtplasmac_sim.qtplasmac_sim_handler) = set:ed3l, python3(panels.sim_panel.sim_panel_handler) = set:ed3l, python3(panels.spindle_belts.spindle_belts_handler) = set:ed3l, python3(panels.test_button.test_button_handler) = set:ed3l, python3(panels.test_dial.test_dial_handler) = set:ed3l, python3(panels.test_led.test_led_handler) = set:ed3l, python3(panels.test_panel.test_panel_handler) = set:ed3l, python3(panels.test_probe.test_probe_handler) = set:ed3l, python3(panels.tool_dialog.tool_dialog_handler) = set:ed3l, python3(panels.versaprobe.versaprobe_handler) = set:ed3l, python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler) = set:ed3l, python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler) = set:ed3l, python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler) = set:ed3l, python3(panels.vismach_millturn.vismach_millturn_handler) = set:ed3l, python3(panels.vismach_router_atc.vismach_router_atc_handler) = set:ed3l, python3(panels.vismach_scara.vismach_scara_handler) = set:ed3l, python3(plasmac.block), python3(plasmac.bolt_circle), python3(plasmac.circle), python3(plasmac.ellipse), python3(plasmac.gusset), python3(plasmac.line), python3(plasmac.polygon), python3(plasmac.rectangle), python3(plasmac.run_from_line), python3(plasmac.sector), python3(plasmac.slot), python3(plasmac.star), python3(plasmac.triangle), python3(pncconf), python3(pncconf.build_HAL), python3(pncconf.build_INI), python3(pncconf.data), python3(pncconf.pages), python3(pncconf.private_data), python3(pncconf.tests), python3(popupkeyboard), python3(propertywindow), python3(pyhal), python3(pyngcgui), python3(pyui), python3(pyui.commands), python3(pyui.master), python3(pyui.panelui_validate), python3(pyui.widgets), python3(pyvcp_widgets), python3(qt5_graphics), python3(qtvcp), python3(qtvcp.core), python3(qtvcp.lib), python3(qtvcp.lib.audio_player), python3(qtvcp.lib.auto_height.auto_height), python3(qtvcp.lib.aux_program_loader), python3(qtvcp.lib.colored_formatter), python3(qtvcp.lib.gcode_utility), python3(qtvcp.lib.gcode_utility.facing), python3(qtvcp.lib.gcode_utility.hole_circle), python3(qtvcp.lib.gcode_utility.hole_enlarge), python3(qtvcp.lib.gcodes), python3(qtvcp.lib.keybindings), python3(qtvcp.lib.machine_log), python3(qtvcp.lib.mdi_text), python3(qtvcp.lib.message), python3(qtvcp.lib.notify), python3(qtvcp.lib.preferences), python3(qtvcp.lib.qt_ngcgui.ngcgui), python3(qtvcp.lib.qt_pdf.PDFViewer), python3(qtvcp.lib.qt_vismach), python3(qtvcp.lib.qt_vismach.fanuc_200f), python3(qtvcp.lib.qt_vismach.gantry_5axis), python3(qtvcp.lib.qt_vismach.mill_xyz), python3(qtvcp.lib.qt_vismach.millturn), python3(qtvcp.lib.qt_vismach.primitives), python3(qtvcp.lib.qt_vismach.qt_vismach), python3(qtvcp.lib.qt_vismach.scara), python3(qtvcp.lib.qtplasmac), python3(qtvcp.lib.qtplasmac.conv_block), python3(qtvcp.lib.qtplasmac.conv_bolt), python3(qtvcp.lib.qtplasmac.conv_circle), python3(qtvcp.lib.qtplasmac.conv_ellipse), python3(qtvcp.lib.qtplasmac.conv_gusset), python3(qtvcp.lib.qtplasmac.conv_line), python3(qtvcp.lib.qtplasmac.conv_polygon), python3(qtvcp.lib.qtplasmac.conv_rectangle), python3(qtvcp.lib.qtplasmac.conv_sector), python3(qtvcp.lib.qtplasmac.conv_settings), python3(qtvcp.lib.qtplasmac.conv_slot), python3(qtvcp.lib.qtplasmac.conv_star), python3(qtvcp.lib.qtplasmac.conv_triangle), python3(qtvcp.lib.qtplasmac.conversational), python3(qtvcp.lib.qtplasmac.set_offsets), python3(qtvcp.lib.qtplasmac.tooltips), python3(qtvcp.lib.qtplasmac.updater), python3(qtvcp.lib.ripper.gcode_ripper), python3(qtvcp.lib.sys_notify), python3(qtvcp.lib.toolbar_actions), python3(qtvcp.lib.touchoff_subprogram), python3(qtvcp.lib.virtual_keyboard), python3(qtvcp.lib.writer), python3(qtvcp.lib.writer.ext), python3(qtvcp.lib.writer.ext.datetime), python3(qtvcp.lib.writer.ext.find), python3(qtvcp.lib.writer.ext.table), python3(qtvcp.lib.writer.ext.wordcount), python3(qtvcp.lib.writer.writer), python3(qtvcp.lib.xembed), python3(qtvcp.logger), python3(qtvcp.plugins), python3(qtvcp.plugins.actionbutton_plugin), python3(qtvcp.plugins.bar_plugin), python3(qtvcp.plugins.basic_probe_plugin), python3(qtvcp.plugins.camview_plugin), python3(qtvcp.plugins.container_plugin), python3(qtvcp.plugins.detach_tabs_plugin), python3(qtvcp.plugins.dialog_plugin), python3(qtvcp.plugins.graphics_plugin), python3(qtvcp.plugins.hal_label_plugin), python3(qtvcp.plugins.jogincrements_plugin), python3(qtvcp.plugins.joypad_plugin), python3(qtvcp.plugins.led_plugin), python3(qtvcp.plugins.nurbs_editor_plugin), python3(qtvcp.plugins.overlay_plugin), python3(qtvcp.plugins.qtvcp_plugin), python3(qtvcp.plugins.round_gauge_plugin), python3(qtvcp.plugins.round_progress_bar_plugin), python3(qtvcp.plugins.screenoptions_plugin), python3(qtvcp.plugins.simplewidgets_plugin), python3(qtvcp.plugins.state_label_plugin), python3(qtvcp.plugins.state_led_plugin), python3(qtvcp.plugins.status_adjustment_bar_plugin), python3(qtvcp.plugins.status_label_plugin), python3(qtvcp.plugins.status_slider_plugin), python3(qtvcp.plugins.tab_widget_plugin), python3(qtvcp.plugins.toolbutton_plugin), python3(qtvcp.plugins.versa_probe_plugin), python3(qtvcp.plugins.virtualkeyboard_plugin), python3(qtvcp.plugins.web_widget_plugin), python3(qtvcp.plugins.widgets_plugin), python3(qtvcp.qt_action), python3(qtvcp.qt_istat), python3(qtvcp.qt_makegui), python3(qtvcp.qt_makepins), python3(qtvcp.qt_pstat), python3(qtvcp.qt_tstat), python3(qtvcp.qtvcp_handler), python3(qtvcp.widgets), python3(qtvcp.widgets.action_button), python3(qtvcp.widgets.action_button_round), python3(qtvcp.widgets.action_tool_button), python3(qtvcp.widgets.adjustment_bar), python3(qtvcp.widgets.axis_tool_button), python3(qtvcp.widgets.bar), python3(qtvcp.widgets.basic_probe), python3(qtvcp.widgets.calculator), python3(qtvcp.widgets.camview_widget), python3(qtvcp.widgets.container_widgets), python3(qtvcp.widgets.detach_tabs), python3(qtvcp.widgets.dialogMixin), python3(qtvcp.widgets.dialog_widget), python3(qtvcp.widgets.dro_widget), python3(qtvcp.widgets.entry_widget), python3(qtvcp.widgets.fake_status), python3(qtvcp.widgets.file_manager), python3(qtvcp.widgets.gcode_editor), python3(qtvcp.widgets.gcode_graphics), python3(qtvcp.widgets.geditor), python3(qtvcp.widgets.general_hal_input), python3(qtvcp.widgets.general_hal_output), python3(qtvcp.widgets.hal_label), python3(qtvcp.widgets.hal_selectionbox), python3(qtvcp.widgets.image_switcher), python3(qtvcp.widgets.jog_increments), python3(qtvcp.widgets.joypad), python3(qtvcp.widgets.led_widget), python3(qtvcp.widgets.machine_log), python3(qtvcp.widgets.macro_widget), python3(qtvcp.widgets.mdi_history), python3(qtvcp.widgets.mdi_line), python3(qtvcp.widgets.mdi_touchy), python3(qtvcp.widgets.nurbs_editor), python3(qtvcp.widgets.offset_tool_button), python3(qtvcp.widgets.origin_offsetview), python3(qtvcp.widgets.overlay_widget), python3(qtvcp.widgets.probe_routines), python3(qtvcp.widgets.probe_subprog), python3(qtvcp.widgets.qtvcp_icons), python3(qtvcp.widgets.radio_axis_selector), python3(qtvcp.widgets.richtext_selector), python3(qtvcp.widgets.round_gauge), python3(qtvcp.widgets.round_progress), python3(qtvcp.widgets.runFromLine_dialog), python3(qtvcp.widgets.screen_options), python3(qtvcp.widgets.simple_widgets), python3(qtvcp.widgets.state_label), python3(qtvcp.widgets.state_led), python3(qtvcp.widgets.status_label), python3(qtvcp.widgets.status_slider), python3(qtvcp.widgets.status_stacked), python3(qtvcp.widgets.stylesheeteditor), python3(qtvcp.widgets.system_tool_button), python3(qtvcp.widgets.tab_widget), python3(qtvcp.widgets.tool_offsetview), python3(qtvcp.widgets.touchEntry), python3(qtvcp.widgets.versa_probe), python3(qtvcp.widgets.virtualkeyboard), python3(qtvcp.widgets.web_widget), python3(qtvcp.widgets.widget_baseclass), python3(qtvcp.widgets.widget_switcher), python3(qtvcp.widgets.xembed), python3(rotarydeltakins), python3(rs274), python3(rs274.OpenGLTk), python3(rs274.author), python3(rs274.glcanon), python3(rs274.interpret), python3(rs274.options), python3(screens.blender.blender_handler) = set:ed3l, python3(screens.qt_cnc.qt_cnc_handler) = set:ed3l, python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler) = set:ed3l, python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler) = set:ed3l, python3(screens.qtaxis.qtaxis_handler) = set:ed3l, python3(screens.qtdragon.qtdragon_handler) = set:ed3l, python3(screens.qtdragon_hd.qtdragon_hd_handler) = set:ed3l, python3(screens.qtlathe.qtlathe_handler) = set:ed3l, python3(screens.qtplasmac.languages.qtplasmac) = set:ed3l, python3(screens.qtplasmac.qtplasmac_handler) = set:ed3l, python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler) = set:ed3l, python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler) = set:ed3l, python3(screens.qttouchy.qttouchy_handler) = set:ed3l, python3(screens.tester.tester_handler) = set:ed3l, python3(screens.woodpecker.woodpecker_handler) = set:ed3l, python3(screens.x1mill.x1mill_handler) = set:ed3l, python3(stepconf), python3(stepconf.build_HAL), python3(stepconf.build_INI), python3(stepconf.import_mach), python3(stepconf.pages), python3(tooldb), python3(touchy), python3(touchy.emc_interface), python3(touchy.filechooser), python3(touchy.hal_interface), python3(touchy.listing), python3(touchy.mdi), python3(touchy.preferences), python3(vcpparse), python3(vismach), tcl(Hal), tcl(Hal)-1 = 1.0, tcl(Linuxcnc), tcl(Linuxcnc)-1 = 1.0, tcl(Ngcgui), tcl(Ngcgui)-1 = 1.0, tcl(Ngcguittt), tcl(Ngcguittt)-1 = 1.0 Requires: liblinuxcnc = 2.9.1-alt2.20231009, python3-module-PyQt5-devel, libgtksourceview3-gir, libX11-devel, tclx, tcl-blt, python3(Xlib) < 0, python3(PyQt5.Qsci) < 0, /bin/bash, /bin/sh, /lib/ld-linux.so.2, /lib/udev/rules.d, /usr/bin/env, /usr/bin/python3, /usr/bin/python3.11, /usr/bin/tclsh, /usr/bin/tclsh8.6, /usr/bin/wish, /usr/bin/wish8.6, /usr/lib/python3/site-packages, coreutils, gawk, gcc-common, git-core, grep, libX11.so.6 >= set:oja5r3qabUpLHlTcdkK7Ymnta6aWUK6qURI2aereyuySbaY9Y9rRf80, libXinerama.so.1 >= set:hfyH4K6, libXmu.so.6 >= set:lktel, libboost_python311.so.1.83.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.2.3), libc.so.6(GLIBC_2.27), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.7), libc.so.6(GLIBC_2.8), libcairo.so.2 >= set:miBeiC9UuDqAUQ1bepgkhH08f6m87ljhFbj6, libepoxy.so.0 >= set:plG6OtaOh21hPpoEbYgihHZ0wsB7PrHp7He0, libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgdk-3.so.0 >= set:nkZ5ndiwLew01gu7UA, libgdk-x11-2.0.so.0 >= set:njH9A3kDQ0iQRBflIP1zlE5TpwDZsPmjGbQ, libglib-2.0.so.0 >= set:olyg8bKheHPr7MU1, libgobject-2.0.so.0 >= set:mjQCdZlc930HMK1, libgtk-3.so.0 >= set:qjjZoCF3lFXh6tMGe5LNfHjmYeZBthRtN41TeIZzjgwWOrHiSh2NZBTl9RaGCZcaZtsSDoklAfoY3jZqdwNTjVxluts4fzptNZoObnMXHUBHYRt39LkeFCpeX0XGSNmA8AjwtwC5hgzieP0K2oI8aJb3kDhZ4iVp7IxwWvgRbyDTqaJhAOTD2Fv8g9yPZ6NOuGRIGtqP9FiPwZfRTshMUVUTNtViaQgX5ndOGrJMiFzxXDm6AW3HZBRN91ZxbqL4uj5Pt3embDjf1R8JsH7xQTCBVCxMfYTOJIZFI9ZbiGb6GLX0FyKvWxZH06khJ56lr41PV7VxkpV7CX5AN30dAgkjASU69WAU20ZKQEW5CdLKnYV6PQaWR9Q2d4, libgtk-x11-2.0.so.0 >= set:pijZofB1Sac1HWm6UJI4cT7ZgTZ5cu7LyBFNQFMTkKvPsM6syJWtgE6gCt8VZC2002Yr6O3qpMKORxMYFpGbygZwTFmPjEBmkFK5tZ9puR8V4nvNqcMb9Q8ET5Z5nwuEj7uZbKfI69aHIIc6AKSdSXr1KNVy75UzoI60weGwIZrr62BMCZ1BOfXpj2M6ZjtlXi25ghyZccTXY7GXsFuvoeSJ3yKQFbX9A7iCzUEYa6aZ04fAonLTJJ2yQZ7HcxVrWamaKGUdBx8Y99PalB5dPYDzTFF762xI20, liblinuxcnchal.so.0 >= set:kdPx99okMC0Dz1625MawlIfquO3JZ3ZIUi5Jl7M43uZ4jrJfiRqxZ2hezaWOwqo8jNxXb4PXA5GbMGAP8gNN7e5Z7F9EPZhr3lvZ8aQw6VY2Cu2agoAmBmnw7UQIPmWiMLuqjUJnhudWalGzhjgU7, liblinuxcncini.so.0 >= set:jf3pACnRkFYa1jK9dmLdZcAMQZdkP4S54W3, libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libmodbus.so.5 >= set:kf4sxmJBcjkoYXJ6nZ8w1f3UAmWo529bNQO9HdZ6GfYWQgMVJKZenaurI1UX4, libnml.so.0 >= set:nhHZFI3kBS0Ma7l8Tbc7NDAj0cVe7YpJAecK8HiAlVmUFIacmYZAgNKb7AgZ9o3YcwI77x8lKghWwBp3R3aHXufreVgSJOcHDIMmg3FTiWGgZDSqajrVXGCmzmwK9kEnrrZAXgB, libpango-1.0.so.0 >= set:miqUTrpg55DU675j31iPjU59gVL2, libpangocairo-1.0.so.0 >= set:jiZ1Z0, libposemath.so.0 >= set:mhNqbLmit1h1SKAkf3R8yKzITkH51qlNb2mXMvLIbzYdLSZ1Pn3dvFo360T4Ym3VUZ06J9T65VCYVK5, libpyplugin.so.0 >= set:ifB9gZhMHZs51, libpython3.11.so.1.0 >= set:oipCiruqzTeZzb6nQEDgYmcycRwVJdbZ5iXKYZiJODaguD1Z09heVWM4C62R9XS3UbkznKwtFB0v3EX8wxJskhoMjZnQOps91h0gXMB2zZ0ZiESnuTSI6RauE3xO1AePZyWlNaBQhCb27NyC2QiQiNF0zEU1FA9BQnlAid, libreadline.so.8 >= set:njCJKlFcmgU8mvL3SqZmyq3ZFmIppb, librs274.so.0 >= set:oklu8nstiJF4gERvmYKLZu2B25LRi2g8GwakLmkAhIVMce, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.14), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.20), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtk8.6.so >= set:mh48jtZxaNUhMsSfBJ4AXC6RIwDmyqFM8nd9l1ee9PQ0ud0, libtooldata.so.0 >= set:ieCH2SkPFzG4BeSHWNfZwfGC1oYUwSluc7, libudev.so.1 >= set:kgKhqJ5KQ3IrBeCbBEkBBomRh1RpLFAx211, libudev.so.1(LIBUDEV_183), libusb-1.0.so.0 >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu, lsb-release, procps, python3, python3(OpenGL) < 0, python3(OpenGL.GL) < 0, python3(OpenGL.GLU) < 0, python3(OpenGL.raw.GLX._types) < 0, python3(PyQt5) < 0, python3(PyQt5.QtCore) < 0, python3(PyQt5.QtDesigner) < 0, python3(PyQt5.QtGui) < 0, python3(PyQt5.QtPrintSupport) < 0, python3(PyQt5.QtWidgets) < 0, python3(__future__) < 0, python3(array) < 0, python3(binascii) < 0, python3(cairo) < 0, python3(collections) < 0, python3(configobj) < 0, python3(configparser) < 0, python3(copy) < 0, python3(ctypes) < 0, python3(datetime) < 0, python3(dbus) < 0, python3(decimal) < 0, python3(enum) < 0, python3(fcntl) < 0, python3(fnmatch) < 0, python3(functools) < 0, python3(getopt) < 0, python3(gettext) < 0, python3(gi) < 0, python3(gi.repository) < 0, python3(glib) < 0, python3(glob) < 0, python3(hashlib) < 0, python3(importlib) < 0, python3(inspect) < 0, python3(json) < 0, python3(locale) < 0, python3(logging) < 0, python3(math) < 0, python3(mimetypes) < 0, python3(numpy) < 0, python3(numpy.core) < 0, python3(operator) < 0, python3(optparse) < 0, python3(os) < 0, python3(pickle) < 0, python3(random) < 0, python3(re) < 0, python3(readline) < 0, python3(select) < 0, python3(serial) < 0, python3(shutil) < 0, python3(signal) < 0, python3(socket) < 0, python3(string) < 0, python3(struct) < 0, python3(subprocess) < 0, python3(tarfile) < 0, python3(tempfile) < 0, python3(textwrap) < 0, python3(threading) < 0, python3(tkinter) < 0, python3(traceback) < 0, python3(types) < 0, python3(uuid) < 0, python3(validate) < 0, python3(warnings) < 0, python3(webbrowser) < 0, python3(xml.dom.minidom) < 0, python3(xml.etree.ElementPath) < 0, python3(xml.etree.ElementTree) < 0, python3(yapps) < 0, python3.11-ABI, rtld(GNU_HASH), sudo, tcl, tcl(BWidget), tcl(Tk), tcl(Tk)-8 >= 8.0, termutils, tk, typelib(GLib), typelib(GObject), typelib(Gdk), typelib(GdkPixbuf), typelib(GdkX11), typelib(Gio), typelib(Gst), typelib(Gtk), typelib(GtkSource), typelib(Notify), typelib(Pango), typelib(PangoCairo), typelib(Vte), util-linux, xdpyinfo Requires(rpmlib): rpmlib(SetVersions) Obsoletes: linuxcnc-data <= 2.9.1-alt2.20231009 Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.63Q2dw Creating linuxcnc-debuginfo package Processing files: liblinuxcnc-devel-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.50ZXUk find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.E9zEKP find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/modal_state.hh:25:10: fatal error: vector: No such file or directory 25 | #include | ^~~~~~~~ compilation terminated. cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh: cpp failed, trying c++ mode /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh: cpp failed /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh:19:10: fatal error: rpc/rpc.h: No such file or directory 19 | #include /* struct XDR */ | ^~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h:24: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h:20: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h:34: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h:33: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h:40: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h: cpp failed In file included from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/object_fwd.hpp:8, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh:27: /usr/include/boost/python/detail/wrap_python.hpp:57:11: fatal error: pyconfig.h: No such file or directory 57 | # include | ^~~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh: cpp failed ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.1-alt2.20231009, /usr/lib/liblinuxcnchal.so.0, /usr/lib/liblinuxcncini.so.0, /usr/lib/libnml.so.0, /usr/lib/libposemath.so.0, /usr/lib/libpyplugin.so.0, /usr/lib/librs274.so.0, /usr/lib/libtooldata.so.0, boost-devel-headers Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.tfmxiO Processing files: liblinuxcnc-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.iUuT1T find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0: 119 symbols, 17 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcncini.so.0: 35 symbols, 16 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libnml.so.0: 836 symbols, 20 bpp warning: hash collision: _ZN3NML12format_inputEP6NMLmsg count_characters_in_print_list lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libposemath.so.0: 415 symbols, 19 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libpyplugin.so.0: 23 symbols, 15 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/librs274.so.0: 2001 symbols, 21 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libtooldata.so.0: 21 symbols, 15 bpp Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.LLCZa7 find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: liblinuxcnchal.so.0 = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2, liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0QglXYuh9w4nU6472TqASbUMZzhuUpq1XaKcom1djYYwSVwS7phRSmhfo, libnml.so.0 = set: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, libposemath.so.0 = set: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, libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxAjT5GzcsH3a2zLVzhb, librs274.so.0 = set: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, libtooldata.so.0 = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Requires: libboost_python311.so.1.83.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNuojQRqzp5SpoxPKmKTnJQ2USkkKqHp5h4X8nhmZbVJeHI3ENEULfvnhZ91wcZ0CZvtZ8nZ1cmY40zffx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.9), libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_4.0.0), libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libpython3.11.so.1.0 >= set:oi0GOBAUI3x9Zm2hWASt1vZ3R4nYYfA4VAH3joq8Yna2GUTvbSg3QBmBWdwKz06SOh5x1fxZEHbvodwVQDokPlMCfIgsrE3xO1AuPv374qZiTjyQZcRdeSUEtPaaoPfwkCRbdyfJ0, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.5), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.18), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.26), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtirpc.so.3 >= set:miLQRMTfkMBlyKlAtNseOZekznKvK3HZEZCwnOh, libtirpc.so.3(TIRPC_0.3.0), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.WKn5T1 Creating liblinuxcnc-debuginfo package Processing files: linuxcnc-debuginfo-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.6A3xSL find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.o4AioW find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.1-alt2.20231009, /usr/lib/debug/lib/ld-linux.so.2.debug, debug(libX11.so.6), debug(libXinerama.so.1), debug(libXmu.so.6), debug(libboost_python311.so.1.83.0), debug(libc.so.6), debug(libcairo.so.2), debug(libepoxy.so.0), debug(libgcc_s.so.1), debug(libgdk-3.so.0), debug(libgdk-x11-2.0.so.0), debug(libglib-2.0.so.0), debug(libgobject-2.0.so.0), debug(libgtk-3.so.0), debug(libgtk-x11-2.0.so.0), debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libm.so.6), debug(libmodbus.so.5), debug(libnml.so.0), debug(libpango-1.0.so.0), debug(libpangocairo-1.0.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(libpython3.11.so.1.0), debug(libreadline.so.8), debug(librs274.so.0), debug(libstdc++.so.6), debug(libtk8.6.so), debug(libtooldata.so.0), debug(libudev.so.1), debug(libusb-1.0.so.0) Processing files: liblinuxcnc-debuginfo-2.9.1-alt2.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.T5rk7v find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.IbJspY find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libnml.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(librs274.so.0), debug(libtooldata.so.0) Requires: liblinuxcnc = 2.9.1-alt2.20231009, debug(libboost_python311.so.1.83.0), debug(libc.so.6), debug(libgcc_s.so.1), debug(libm.so.6), debug(libpython3.11.so.1.0), debug(libstdc++.so.6), debug(libtirpc.so.3) Adding to liblinuxcnc-devel a strict dependency on linuxcnc Adding to linuxcnc a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on linuxcnc Adding to liblinuxcnc-debuginfo a strict dependency on liblinuxcnc Adding to liblinuxcnc-devel a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on liblinuxcnc-debuginfo Removing from linuxcnc-debuginfo 47 sources provided by liblinuxcnc-debuginfo also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/emc/pythonplugin also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/cms also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/linklist also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/nml also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/os_intf also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/posemath also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/rcs Removing 7 extra deps from linuxcnc due to dependency on liblinuxcnc Removing 7 extra deps from liblinuxcnc-devel due to dependency on liblinuxcnc Removing 7 extra deps from linuxcnc-debuginfo due to dependency on liblinuxcnc-debuginfo Removing 1 extra deps from liblinuxcnc-devel due to repentancy on linuxcnc Removing 31 extra deps from linuxcnc due to repentancy on liblinuxcnc Removing 6 extra deps from linuxcnc-debuginfo due to repentancy on liblinuxcnc-debuginfo Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-2.9.1-alt2.20231009.i586.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-devel-2.9.1-alt2.20231009.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-2.9.1-alt2.20231009.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm (w2T16.xzdio) 377.99user 204.08system 2:21.15elapsed 412%CPU (0avgtext+0avgdata 471704maxresident)k 0inputs+0outputs (0major+24803886minor)pagefaults 0swaps 5.84user 2.64system 3:10.80elapsed 4%CPU (0avgtext+0avgdata 125312maxresident)k 1288inputs+0outputs (0major+402320minor)pagefaults 0swaps --- linuxcnc-2.9.1-alt2.20231009.i586.rpm.repo 2023-10-13 10:18:12.000000000 +0000 +++ linuxcnc-2.9.1-alt2.20231009.i586.rpm.hasher 2023-11-04 07:42:06.846265256 +0000 @@ -7064,3 +7064,3 @@ File: /etc/linuxcnc 40755 root:root -File: /etc/linuxcnc/rtapi.conf 100644 root:root d9d8a63a3001266e79a4756ff3b03671 +File: /etc/linuxcnc/rtapi.conf 100644 root:root e32d6a87c6d68e4321f05bda39edd8cf File: /lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 @@ -7364,3 +7364,3 @@ File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root 4386ca6e56340a069fbc9559cc7e398e -File: /usr/lib/linuxcnc/realtime 100755 root:root 8d81d22c7ce98701134e4ae0bdd1496a +File: /usr/lib/linuxcnc/realtime 100755 root:root a00976c9a4457b1f8a0a3fefaddc27ce File: /usr/lib/python3/site-packages/__pycache__ 40755 root:root @@ -12364,3 +12364,3 @@ File: /usr/share/man/man1/panelui.1.xz 100644 root:root 61f547f5665fc80d03da476743e17d4d -File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 3380384ab8896635439b44162347af12 +File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 9df49d010b51f866d326d7dbf5cbf6fa File: /usr/share/man/man1/pmx485-test.1.xz 100644 root:root 20b815b28f4df48358282e8d88b3a0fa @@ -12393,3 +12393,3 @@ File: /usr/share/man/man1/teach-in.1.xz 100644 root:root fc226b9d2b564e3fad4c5ff0b945c813 -File: /usr/share/man/man1/thermistor.1.xz 100644 root:root 52e2ceb240ac2a0486a79bd573f16efe +File: /usr/share/man/man1/thermistor.1.xz 100644 root:root 6c1765cc0c284027b7827f597778534f File: /usr/share/man/man1/tooledit.1.xz 100644 root:root c7d86f1ec43340e80f69de9a88166fd8 @@ -12399,3 +12399,3 @@ File: /usr/share/man/man1/vfs11_vfd.1.xz 100644 root:root 65395473fdddbe5a7f8789b49d8b6b37 -File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root f9bfd6955ae956a7cd19f2d5bcafd87e +File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root fc3c12dffd08bccf2c2214645b925ec2 File: /usr/share/man/man1/xhc-hb04-accels.1.xz 100644 root:root 0cff8637e027604edb6d81ff9beaa4ff @@ -12520,44 +12520,44 @@ File: /usr/share/man/man3/undocumented.3rtapi.xz 100644 root:root 002b721b89292b438d9dbf89f1ff823b -File: /usr/share/man/man9/abs.9.xz 100644 root:root 9159f9727a60c30b384b45f690beeabd -File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root ffa7a3e89f79cd4782ce828eb18ddcbf -File: /usr/share/man/man9/and2.9.xz 100644 root:root 15d2ecec6ff68e9746d9034784efd6d6 -File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 387099801f234ea32b0d2c23d6ff1ee8 +File: /usr/share/man/man9/abs.9.xz 100644 root:root b8ba7882073524fad07a550bb41df82a +File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root df89ef5aaf85a9d262dc9300a58d3d94 +File: /usr/share/man/man9/and2.9.xz 100644 root:root 67497958c2d119e7f400dec999d5b774 +File: /usr/share/man/man9/anglejog.9.xz 100644 root:root a7fa73cfdf36d638972c047023900ffa File: /usr/share/man/man9/at_pid.9.xz 100644 root:root d578fa506b91fa3aa94136679b39f656 File: /usr/share/man/man9/axis.9.xz 100644 root:root f688c161a447b4d64af5406eaa4b3c09 -File: /usr/share/man/man9/axistest.9.xz 100644 root:root ffc492af4a1626b7c17ae15d46aeb921 -File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 1cd31734d9ac11f65a37debef333a420 -File: /usr/share/man/man9/biquad.9.xz 100644 root:root 17958b5c35c86029137bee53e2f0acb0 -File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 79e171697af6d2a50b078febe40bae9c -File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 85744c2d7721e8e30b55a1d0ce32f2ef -File: /usr/share/man/man9/bldc.9.xz 100644 root:root ff66fdf4e01b9ba3b7b6a3bf1d7b1da4 -File: /usr/share/man/man9/blend.9.xz 100644 root:root 67b6d90cf18373df7bf3e71523844717 -File: /usr/share/man/man9/carousel.9.xz 100644 root:root 68306a0b9d5620493325fbf57e1067bb -File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root 4cce2cb7fa3ed7dde33da8109e0f4f8d -File: /usr/share/man/man9/clarke2.9.xz 100644 root:root b6d8c436901a80d462d4609039d12dd9 -File: /usr/share/man/man9/clarke3.9.xz 100644 root:root a7c01c768fdb0abc299d9738caee730f -File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 97c3a03737f41cdd951252fbb96f4f5f +File: /usr/share/man/man9/axistest.9.xz 100644 root:root 5c254eb5abafe4ba91b1f32c7ca26ed1 +File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 00fa437ab5e81bbe3701f1405b59e411 +File: /usr/share/man/man9/biquad.9.xz 100644 root:root 5328fc1dcee8ac48dcdbeb05bbe362d4 +File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 554adf1642d642346f2b30dc13d10088 +File: /usr/share/man/man9/bitwise.9.xz 100644 root:root d8c5dc8db8f7ceb13e8c96b7fc38af5c +File: /usr/share/man/man9/bldc.9.xz 100644 root:root f68eb50bcc90a30dd35b0df3ab000dc5 +File: /usr/share/man/man9/blend.9.xz 100644 root:root cfc11e61c3a85ffb9a569afb519e56f9 +File: /usr/share/man/man9/carousel.9.xz 100644 root:root 0e36511f0ef9450c5e3854c7c7c4b653 +File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root e9e2aed4ecdc211eae5c4c0970e2f11e +File: /usr/share/man/man9/clarke2.9.xz 100644 root:root 811c581f362eb013badbe7f56eb767c2 +File: /usr/share/man/man9/clarke3.9.xz 100644 root:root 23f672b8fefe7713e69dc9798325c6d2 +File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 23469b83cac917779eebe08c62da225e File: /usr/share/man/man9/classicladder.9.xz 100644 root:root 0a15b834496451ff9a41f7297f36b0f0 -File: /usr/share/man/man9/comp.9.xz 100644 root:root ae6d9df66f498d9dfbad6a5ffad0e10f -File: /usr/share/man/man9/constant.9.xz 100644 root:root 78c24a5c17487a1161c0b92ddcfc9836 -File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root bdbac3929036dfb4ba9d3df700855a00 -File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root ec4fba260f7c9904b7a06e335798ab51 -File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 783a9c34277f88bc4de1a7c3a8256f6b -File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 03e051ccd95aa72b0a4fe51b2432bf12 -File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root 4b4feb27614f5fcc820042b52b1f8bb9 -File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 3eb9f69680c51defbf94ac70bcebdd9f -File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 1fb0cf30bf25f39b371acb1fe547e6be -File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 23eb1b08eeee47278f5b0b3122fd2ead -File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root a13e49161f109d47fbcb82a6ed50048a -File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 3bd7f1682a0629fcdcf3a56a0dd2249d -File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root fdb84556d7a694b9e111e3584c03d6e6 -File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root 00bcb25c4c37f84ea284e2af584a57f5 +File: /usr/share/man/man9/comp.9.xz 100644 root:root f7920c2165e153d95db22eeeb5263f79 +File: /usr/share/man/man9/constant.9.xz 100644 root:root e2a7a820ee9cfd853a128e586bf709ea +File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 8a923134ac9e3c7b34532d9875106bbc +File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root cd0b7b7746328241071b4f7808639ce7 +File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root d18a9d9aacce55c8c92dbb5910a52d98 +File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 435d9f8b8d0fbdb756ce145aee8a9635 +File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root 87337a42e6e606383cbfb8ed6daa7f53 +File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 53cb8f74766754cb480c7682b474c3ad +File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 00b23a73a74fb20ca25358a57681ab51 +File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 34b0599ea73b6c18951ef14d8d7093c6 +File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root e31c1f56571ca0560feadcf7bd1b0507 +File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 5055ed87f6770082933e236f4a74b520 +File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 9c1a1e4eeadbdbb2bb9dad1ba66a447b +File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root ad4bdd3e4a931276572e5961d88469e0 File: /usr/share/man/man9/counter.9.xz 100644 root:root 83f81a48047a93aac54a70c298a8b8ee -File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 9a0ac84171f736efdd38791cd286e916 -File: /usr/share/man/man9/ddt.9.xz 100644 root:root e4106768a1296c0ee758d6a97e02c4c0 -File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 450178e1085858b1ff4b5a6abd8f00b2 +File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 50593db64f496064eebc25cca5a2e232 +File: /usr/share/man/man9/ddt.9.xz 100644 root:root c5ed2cba37f9a7c9a0bb19612e4d993a +File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 9ca7227ba846660a0ae9fa6a22a13456 File: /usr/share/man/man9/debounce.9.xz 100644 root:root bd2406b69a89bf1c3ef92b42bfe93f3d -File: /usr/share/man/man9/demux.9.xz 100644 root:root 9722fa94bc4fc2a11d8402f3174bb70c -File: /usr/share/man/man9/differential.9.xz 100644 root:root de3696303dd9083199a5fea741169726 -File: /usr/share/man/man9/div2.9.xz 100644 root:root 53c069918ceac9724f036be059f0d390 -File: /usr/share/man/man9/edge.9.xz 100644 root:root ccbfacd77a03a727edf7524dfa65fb41 +File: /usr/share/man/man9/demux.9.xz 100644 root:root 38690cecc32dcb11b08f3bef8222812a +File: /usr/share/man/man9/differential.9.xz 100644 root:root a74e0f503027a76d5462ce1dbb7328e7 +File: /usr/share/man/man9/div2.9.xz 100644 root:root 63f728e9da385288596bf13fdd4993df +File: /usr/share/man/man9/edge.9.xz 100644 root:root df34947531d0e239b9bb1f95e2234962 File: /usr/share/man/man9/encoder.9.xz 100644 root:root 12631bc793eb57261edeccfb1868447a @@ -12565,10 +12565,10 @@ File: /usr/share/man/man9/enum.9.xz 100644 root:root aeaf0343bfe8d0971b11eed24dfef9ea -File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 8a69410731644a864f541d761d7bdf9a -File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root e1d008abb3134ccc3aa8038b7a67acd3 -File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root e076c7f50682d5ca9dc354df0dc778fd -File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root e97dad99303f87b60654a158371e2958 -File: /usr/share/man/man9/flipflop.9.xz 100644 root:root d13865d802a4a20fbb1ad0a4b1381d12 -File: /usr/share/man/man9/gantry.9.xz 100644 root:root 22d811d725e6a9e280ff16dea1142db3 +File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 098485c3c3ed52be8461a00a4441046d +File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 02b25dcb71b4291a80a73e6030d39125 +File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 95abd8c17f144ea2abe3c820db6965c0 +File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 47528c1ae5cacbb67432e4f59e5594ab +File: /usr/share/man/man9/flipflop.9.xz 100644 root:root fcbf7085763ac8057a771d8d8fb211e4 +File: /usr/share/man/man9/gantry.9.xz 100644 root:root 42887b0140e4b8717c5176b35f06ce6e File: /usr/share/man/man9/gantrykins.9.xz 100644 root:root a388b2c041c10d2e154213b6a190d69e -File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 90040c4b0e8d15e418dda9f3511af813 +File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 70f235525c98c3e59d74b41bccf95fb4 File: /usr/share/man/man9/genhexkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12577,6 +12577,6 @@ File: /usr/share/man/man9/gladevcp.9.xz 100644 root:root 26d85cce38cef8e5cee1a6845d897b4d -File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 4437e473dc29e665053d30f974b3b5f8 +File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 57f0c716482d6ec324a95adcaa82fc5c File: /usr/share/man/man9/hal_bb_gpio.9.xz 100644 root:root b8610c3245eb6a6a34b2071dae79effe File: /usr/share/man/man9/hal_parport.9.xz 100644 root:root 0e9862dfa7a66f23eff384631bc10a25 -File: /usr/share/man/man9/histobins.9.xz 100644 root:root 19689681dc722d806b1b5bb6f1bf0c4d +File: /usr/share/man/man9/histobins.9.xz 100644 root:root 33d1291e2a259cdd818a6e9e9b9ecaab File: /usr/share/man/man9/hm2_7i43.9.xz 100644 root:root ec628cb4aadd965825a78075995c1e2e @@ -12587,54 +12587,54 @@ File: /usr/share/man/man9/hm2_spi.9.xz 100644 root:root 382b4ac9c860f7945c061b1e9bd15cdf -File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 4bcf93b68f9ca8c268e488399a1f9653 +File: /usr/share/man/man9/homecomp.9.xz 100644 root:root a95583f0181cc54a4f2a7e045bc0fa2b File: /usr/share/man/man9/hostmot2.9.xz 100644 root:root 65c28ac9f89cfc19cb43607dd0b6561b -File: /usr/share/man/man9/hypot.9.xz 100644 root:root 8bc016b9f82e3e5d0b253bd41c001a5d -File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 62e64ed3fa6bee995f2641c955e6f206 -File: /usr/share/man/man9/integ.9.xz 100644 root:root 5d2afd14cc7b019debb78dcb7c620a64 -File: /usr/share/man/man9/invert.9.xz 100644 root:root 33e0ad4b7dec45fa2a405e7692dc02ae -File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root d6809315b6090df6e32c86d2f63beed5 +File: /usr/share/man/man9/hypot.9.xz 100644 root:root 31ee5d6cb0c8496c5632453df3201bf6 +File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root c1dd5632c4f7b4844de8930ee03a887e +File: /usr/share/man/man9/integ.9.xz 100644 root:root a3e8f6fa65c52797955a17e0cc5139f8 +File: /usr/share/man/man9/invert.9.xz 100644 root:root 28f2962c2164143fe76b24df474ca8a5 +File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root 30107cd95be8491eb5aa749f2eeef62f File: /usr/share/man/man9/kins.9.xz 100644 root:root 7ef613a8265b032556c4e99f80eeee38 -File: /usr/share/man/man9/knob2float.9.xz 100644 root:root d7a1d768f990c0c6ed14a2daeffe2d6f -File: /usr/share/man/man9/latencybins.9.xz 100644 root:root 66452db0ed56fd9cd786e5548c53e033 +File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 69ae11010e78842a33297251fd170105 +File: /usr/share/man/man9/latencybins.9.xz 100644 root:root c62a54d85fca4e80afc97077998a36c6 File: /usr/share/man/man9/lcd.9.xz 100644 root:root 620cc2889dca47fa4e7586ff480ba974 -File: /usr/share/man/man9/limit1.9.xz 100644 root:root e15e722cecaceb8d1598814b9f580ac1 -File: /usr/share/man/man9/limit2.9.xz 100644 root:root d300c6d614e125ce65016f4953faa567 -File: /usr/share/man/man9/limit3.9.xz 100644 root:root c6433dd50bcdb4a809a763d9a4862276 -File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root e4907016e8a473a0accbdc65ae03886c -File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 8e22f7ecff65a7e0cb5482a0b52f082a +File: /usr/share/man/man9/limit1.9.xz 100644 root:root c01ef73970c37ee85ed7389a94ff8d2a +File: /usr/share/man/man9/limit2.9.xz 100644 root:root d91f26c4051062054600a2dd844769cb +File: /usr/share/man/man9/limit3.9.xz 100644 root:root 25e033b5cf66cc13576ca51a405d3cc8 +File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root 95ff85eaf9662cb72f9bb0ab2cd3811e +File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 85c482b44a30f9e59433799f2eb580a7 File: /usr/share/man/man9/lineardeltakins.9.xz 100644 root:root ce6ac2a9983a327635ddcd90d0e26def -File: /usr/share/man/man9/logic.9.xz 100644 root:root 5e672815ee320ad34e905931c1384208 -File: /usr/share/man/man9/lowpass.9.xz 100644 root:root c67022d9f51a8e9879fae4bb6fff0aa8 -File: /usr/share/man/man9/lut5.9.xz 100644 root:root 8155731ab5077bb0dad451d07e0ff2fc -File: /usr/share/man/man9/maj3.9.xz 100644 root:root 97c6e5f0e65c961829cec56fb5e6870b -File: /usr/share/man/man9/match8.9.xz 100644 root:root a9e7f91352d9308d2658e9f33a7675f1 +File: /usr/share/man/man9/logic.9.xz 100644 root:root 3cbde6878a44c468f414c9f8484c8b02 +File: /usr/share/man/man9/lowpass.9.xz 100644 root:root eb04a4ee9aa1e9d32a4d00a6a8fe3b13 +File: /usr/share/man/man9/lut5.9.xz 100644 root:root 1f4077beffdd62d675189bb18bc054ea +File: /usr/share/man/man9/maj3.9.xz 100644 root:root 5b7f4d2af198bc9a7c797b593ba1a6be +File: /usr/share/man/man9/match8.9.xz 100644 root:root 267626cec8ce9651ba267113ef87f5be File: /usr/share/man/man9/matrix_kb.9.xz 100644 root:root 339c35c251b89cbdb7a0e83bce7035d9 -File: /usr/share/man/man9/max31855.9.xz 100644 root:root ad7990e928d36051c45bf8b0aa5e2286 +File: /usr/share/man/man9/max31855.9.xz 100644 root:root e22a6e65244b9234798e5e961c454917 File: /usr/share/man/man9/maxkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root 453c3fc8d0ac810384daaf7c1c05f71b -File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root f7f60076abaeaaaa98687c654fe27caf -File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 92032cf347b57a15e8fdd0354e17d892 -File: /usr/share/man/man9/message.9.xz 100644 root:root aa98b80033decf45ff35eba6a2aac2b6 -File: /usr/share/man/man9/millturn.9.xz 100644 root:root b2e0d357b96b5a9cec1011258a087103 -File: /usr/share/man/man9/minmax.9.xz 100644 root:root bd130911034bde8b959cdd1b2750116b +File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root dceb52b7eb5c9b35b3184491ef8444f8 +File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root ba47128108c7e035b535c567ab34e131 +File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 892f43f48640bd39c44422556ab2c7cd +File: /usr/share/man/man9/message.9.xz 100644 root:root 3d7534b0f982c4527f49c512eac39af4 +File: /usr/share/man/man9/millturn.9.xz 100644 root:root 902b175c2758e9f1723f591b06dc0c83 +File: /usr/share/man/man9/minmax.9.xz 100644 root:root 3e7bc7a167cfd52472fc385d64d71d54 File: /usr/share/man/man9/motion.9.xz 100644 root:root 52de9abe229c718ed49a6e7c1fc183b4 -File: /usr/share/man/man9/moveoff.9.xz 100644 root:root d6e0c950c55a5b4291cc6ad50a4842e1 -File: /usr/share/man/man9/mult2.9.xz 100644 root:root f76045003604446e15b4e49fe57174a0 -File: /usr/share/man/man9/multiclick.9.xz 100644 root:root a5c1b320d56ef1daaa1b7e3506111de0 -File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 2708d83c3d8b96861644e8fd80eda1ad -File: /usr/share/man/man9/mux16.9.xz 100644 root:root e6a3abb01d8bd03f3a019e871486ed14 -File: /usr/share/man/man9/mux2.9.xz 100644 root:root 21bd2b71212761d79c686dd7a677a845 -File: /usr/share/man/man9/mux4.9.xz 100644 root:root 718d484838c85759c715531bbae72e0a -File: /usr/share/man/man9/mux8.9.xz 100644 root:root 43c0e23e6539c2ebab48773a63f3473e +File: /usr/share/man/man9/moveoff.9.xz 100644 root:root e3a439c85b81be1eb131d8cae3aaca4a +File: /usr/share/man/man9/mult2.9.xz 100644 root:root 347b84a8ffc8107128d2aaa80599e1e9 +File: /usr/share/man/man9/multiclick.9.xz 100644 root:root c14f37414a498787906e7ceb21fe194d +File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 64858b3a004fe2c809bc50877f69c5f6 +File: /usr/share/man/man9/mux16.9.xz 100644 root:root 0a556772e8f07c966aea426fe653ac76 +File: /usr/share/man/man9/mux2.9.xz 100644 root:root 1de5a6085ebc03ac808ade55357c978a +File: /usr/share/man/man9/mux4.9.xz 100644 root:root eb0b546b7d9cdb227766eaf271ecadfa +File: /usr/share/man/man9/mux8.9.xz 100644 root:root 18508180aa5a726d345eca8b5febc6dc File: /usr/share/man/man9/mux_generic.9.xz 100644 root:root 81ed0423e2b5c893c152d9ed4491b0f5 -File: /usr/share/man/man9/near.9.xz 100644 root:root 5d85828ca363dd135ff2f889d3952971 -File: /usr/share/man/man9/not.9.xz 100644 root:root cfa76ad30120aa0aaf10190f6182b001 -File: /usr/share/man/man9/offset.9.xz 100644 root:root 0a00fbba2074fe059807eb788657348b -File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 1b8072b813a3f817436b558a386152a7 -File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 8573dd140e489f7fed9bab94625bc699 +File: /usr/share/man/man9/near.9.xz 100644 root:root 8dddcae5150b7819b5872e37d43f7904 +File: /usr/share/man/man9/not.9.xz 100644 root:root f7ed03cb2d723dca26d0f3bf49767fe4 +File: /usr/share/man/man9/offset.9.xz 100644 root:root b13592a903359dc8eab1bbfac456e094 +File: /usr/share/man/man9/ohmic.9.xz 100644 root:root ff28171a1a16d5e8f54ba8e029461009 +File: /usr/share/man/man9/oneshot.9.xz 100644 root:root a0edec8409a381bb565f6698dad246a7 File: /usr/share/man/man9/opto_ac5.9.xz 100644 root:root ed6aa04a42b4697aea2bc5fc7de8500a -File: /usr/share/man/man9/or2.9.xz 100644 root:root de750267438fdad20897b3715a5cf601 -File: /usr/share/man/man9/orient.9.xz 100644 root:root aa863acf99302d48c5d11069937e846f +File: /usr/share/man/man9/or2.9.xz 100644 root:root 11ff711bde126180379746cb45dab730 +File: /usr/share/man/man9/orient.9.xz 100644 root:root f5b88e26c88efc69359c5accea72cf44 File: /usr/share/man/man9/pentakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 File: /usr/share/man/man9/pid.9.xz 100644 root:root 9106a5d37a8880989de46921cdb78588 -File: /usr/share/man/man9/plasmac.9.xz 100644 root:root c108ef9878673c4e791a37a5e32d9152 +File: /usr/share/man/man9/plasmac.9.xz 100644 root:root b8f26b62517fa14f3077d7ca87b184b5 File: /usr/share/man/man9/pumakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12643,52 +12643,52 @@ File: /usr/share/man/man9/rotatekins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root b79c79b43e5beb682d43ba02f2b9c746 +File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root bc5776f056ecf640fd3c840041074119 File: /usr/share/man/man9/sampler.9.xz 100644 root:root 713192b4e67ac75366e7848681137025 -File: /usr/share/man/man9/scale.9.xz 100644 root:root 167a379a502abfa05752dce7157bbfe3 -File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 896e6dabf97b9f717e9ad2d11cde2871 +File: /usr/share/man/man9/scale.9.xz 100644 root:root 8c566f4974405d94505fd4ea101c74fd +File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 5e7e190ff92afd61c11ff1cd0d23fd96 File: /usr/share/man/man9/scarakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/select8.9.xz 100644 root:root 5a9b34ad64f1c37c0b721f57331a9c06 -File: /usr/share/man/man9/serport.9.xz 100644 root:root b1b816d4945ad19b32992d83083dc42f +File: /usr/share/man/man9/select8.9.xz 100644 root:root cde0e21719923fd96a3a48948736e1ae +File: /usr/share/man/man9/serport.9.xz 100644 root:root b31584558e995cb0c020e07bda6f12bb File: /usr/share/man/man9/setsserial.9.xz 100644 root:root a0c4c6061b229bf1b0bd7b45aa0a6d1b File: /usr/share/man/man9/siggen.9.xz 100644 root:root bb8a58ed0261c53246a616a6e5859857 -File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 740f05e0e89d1597aa3815b03718755c +File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 5626af786a0cb819f4bed6ecd1247e5e File: /usr/share/man/man9/sim_encoder.9.xz 100644 root:root 1061200399dc5f45100c0b9ac0b34ddc -File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root ae120740da8a7731cf4d6e1860edd819 -File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root d549227e8bafa9c9f9fef3751964271d -File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root d190fe2872648c910c5e6c4bc5ac2bb8 -File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root e159c5cd1c2dbb8abb3e140f8e7e757d -File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root ac776ca200c95805c2e360b042932da9 -File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root bf6da7c3ad05e159af93fc5065ae82a0 -File: /usr/share/man/man9/spindle.9.xz 100644 root:root 344cafde18634f3c06ced0f2d6e04b3f -File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root bf706b0c806758419a1763225dd00370 +File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 37d24720b9cc53802b2f80314dc20bf9 +File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root 1582c2cb411df03f3602ff3f6e55a67b +File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root fb0da78124f35e2a96aebcc21b5544bb +File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 0e0581bd18e28beb94b3015d4037fa18 +File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 593586147f4efe4efe7023e702ed1a96 +File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 9b450d85dbe3ed8a9a817feab6109cd3 +File: /usr/share/man/man9/spindle.9.xz 100644 root:root 83196ad40ea869eba6edb02297ca1af9 +File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root a60e3a627d116f91d89a0094f3ec58d4 File: /usr/share/man/man9/sserial.9.xz 100644 root:root cda27ad79b3b748fe69d3aa6133dbdf9 File: /usr/share/man/man9/stepgen.9.xz 100644 root:root 1151c7075a51ad05e9e82ff643cce6a9 -File: /usr/share/man/man9/steptest.9.xz 100644 root:root 3d16d82a42cfcfc40ebcbb60eaa2f018 +File: /usr/share/man/man9/steptest.9.xz 100644 root:root 90590956871196bc8d465df7896b9ef1 File: /usr/share/man/man9/streamer.9.xz 100644 root:root d43c7f2928b8ecb99d6707ebc18db847 -File: /usr/share/man/man9/sum2.9.xz 100644 root:root 7ac5d7227733873a91e98d77d184e83c +File: /usr/share/man/man9/sum2.9.xz 100644 root:root 06b58c94dcf6930100b425b4bbc2bb0c File: /usr/share/man/man9/supply.9.xz 100644 root:root 760e3e6615392513db8cc348d9c1147b -File: /usr/share/man/man9/thc.9.xz 100644 root:root 1c79c91e936bf5719ddf2bb236d8df57 -File: /usr/share/man/man9/thcud.9.xz 100644 root:root 173b28b294e8baf0e39fb1cca65e49a9 +File: /usr/share/man/man9/thc.9.xz 100644 root:root bdfcebbf0f24bad3218bd9b2f2e65a4d +File: /usr/share/man/man9/thcud.9.xz 100644 root:root 575f97366b6c3785f7ce26c729ce76cb File: /usr/share/man/man9/threads.9.xz 100644 root:root 0a89f5af89b5cdf6d132fcfb19ba8726 -File: /usr/share/man/man9/threadtest.9.xz 100644 root:root 20746364b38745cdc3d195839c3accfd -File: /usr/share/man/man9/time.9.xz 100644 root:root 9ad434a86679061255fdf797ea0ddb74 -File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 56a032a911b0bb3f135617dc8111b744 -File: /usr/share/man/man9/timedelta.9.xz 100644 root:root e9177b9710cf680b262137a6f1b216d7 -File: /usr/share/man/man9/tof.9.xz 100644 root:root 092ed2c520b566054e6eee3b6b4e51b1 -File: /usr/share/man/man9/toggle.9.xz 100644 root:root f1e35be676ada6751d0d78ff761b4f5d -File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 5edf20a9e75b05eeaf7ae35cb1be17dd -File: /usr/share/man/man9/ton.9.xz 100644 root:root a8168f4cf05c8cd3195ca23e5040a9c2 -File: /usr/share/man/man9/tp.9.xz 100644 root:root e7ba6b0cb25960944f1ec55ded74855f -File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 142f39153c71b14533e8664c744fca42 +File: /usr/share/man/man9/threadtest.9.xz 100644 root:root f5af108fd4d8f9f4f798eb9aceb0d2ab +File: /usr/share/man/man9/time.9.xz 100644 root:root efd6694ad310fd62a2608929e8f25938 +File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 2165c480b6d17289c9fa7e3668cfaa63 +File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 285f9f8ebef0069df22607da630b3f8e +File: /usr/share/man/man9/tof.9.xz 100644 root:root 0599b938035af4fb09adc113b2a82c89 +File: /usr/share/man/man9/toggle.9.xz 100644 root:root 0849c682f4f243ccc0b392a41fcaf5d8 +File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root a5c42ec8d7880ff9608fccdf5b7c1f31 +File: /usr/share/man/man9/ton.9.xz 100644 root:root d0d7aa60533f53b5181487d1b2f82bfc +File: /usr/share/man/man9/tp.9.xz 100644 root:root 583d6db3c7e297d8cd909973750c5276 +File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 183d3fe89e863fee7ac64ec32c679691 File: /usr/share/man/man9/tripodkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 27fb075716d7eb29249c0f376c40023c -File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root b9958416f392a54cfa88ec0844444a05 +File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root b79a4e0d54b01c03ab5c3b0fa8a414ed +File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root 4aa0f2584d60413ab4febe7207209610 File: /usr/share/man/man9/trivkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/updown.9.xz 100644 root:root 7c0a2e9e9a39a57562ca7adb56999d73 -File: /usr/share/man/man9/userkins.9.xz 100644 root:root 93f0fff4e5b992800c6644c5333f331f +File: /usr/share/man/man9/updown.9.xz 100644 root:root ba751d6a3c9101f15a4ab9a7fa8eef80 +File: /usr/share/man/man9/userkins.9.xz 100644 root:root 991ab1be017c3615eb5902e2b97fb9f8 File: /usr/share/man/man9/watchdog.9.xz 100644 root:root 3ccf8bb1e89f95bd9212dab04d95b193 -File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 21e69239660467fa0db0e96b8ede8eec +File: /usr/share/man/man9/wcomp.9.xz 100644 root:root f21599b7bcdbb227a5c45e6bb8884dbd File: /usr/share/man/man9/weighted_sum.9.xz 100644 root:root eb6db3b792484b220170ad1fd6fce770 -File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 696a22f91b8a5a09c8d8db73c8b47e12 -File: /usr/share/man/man9/xor2.9.xz 100644 root:root bb8b394788eb2d5b6e04dab2d4d2a894 -File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root e243796c33baeea9c997e3dcbfcb5549 +File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 2a7f35aae8e467f718b71d3a1ae7816f +File: /usr/share/man/man9/xor2.9.xz 100644 root:root 373ba2a62d02dd8ce2444244d2e4c61e +File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root b86212501b5d937eeaa879562b4dadb3 File: /usr/share/qtvcp 40755 root:root @@ -13644,2 +13644,2 @@ File: /usr/share/qtvcp/widgets_ui/virtual_keyboard.ui 100644 root:root e757c13d9a96b2fb641409c70442ded6 -RPMIdentity: de93c7c811843384d73c9d86a388c8e16fc9745cbb5f24d507043c779fc3f6682b107e3bb2fdf37ffd99376f8b9c68f4772891e26beab54aec102122e7c807d6 +RPMIdentity: fef550ccd0980986d947138cb24f03ad486e19e1cbcdb58274199613118cf69197237920b4a55445579ee2dd17715e24d2e2e09624586bb1df2160b0dac3de3a --- linuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm.repo 2023-10-13 10:18:12.000000000 +0000 +++ linuxcnc-debuginfo-2.9.1-alt2.20231009.i586.rpm.hasher 2023-11-04 07:42:06.931266478 +0000 @@ -2836,3 +2836,3 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 750071db2b78d3fac550862e05b7350c +File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 10ff297922a1717dab07949d1669fac9 File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.comp 100644 root:root 36db960cdfb47870d04dc0825e67fbe5 @@ -2847,3 +2847,3 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 13b95aa4a20b0b0e898d18d597e7420e +File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 8503112b62ba2334ef8d43504780cf95 File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.comp 100644 root:root 59df738983b6701d52519fdd79609b2f @@ -2894,127 +2894,127 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs.c 100644 root:root 447cca3d73c7705b4f4264c20ececb0a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs_s32.c 100644 root:root b424b8e6fdf5d804523d9a892153b010 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/and2.c 100644 root:root c1f13f10a729d5a6ef943377944f507f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/anglejog.c 100644 root:root 76c8f0f0e033e8f0518b97b1c7da9e22 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/axistest.c 100644 root:root 9e4b783e400607dfa81902469a1fc266 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bin2gray.c 100644 root:root 3a5e70831161eb6c4bf73ed71535fd8d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/biquad.c 100644 root:root 0b03897868c5c378955048888b0c4ec2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitslice.c 100644 root:root a3f1fc897cc7fe59d46c8caff5771130 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitwise.c 100644 root:root f25553b3a06467efb315fb1d6b8ef5c7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bldc.c 100644 root:root 5f5442e622663e5f3b8297f0c9bd510b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/blend.c 100644 root:root 99bfa8aa643d68cdc40ba953dc767bee -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/carousel.c 100644 root:root 19e9c030ac72fc3146bc381363b6eb24 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/charge_pump.c 100644 root:root 4d3d6c87d7b2dba97a128966f716944c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke2.c 100644 root:root 364ca4cf17b56c411aa9b802c75addf6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke3.c 100644 root:root 3e3df8f14f134c6c4ea5f4e5fcf04f8b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarkeinv.c 100644 root:root 74078c9cd212b06764e7ab1e02e1a2be -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/comp.c 100644 root:root e2d785ca75a164cca13039bd815693a3 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/constant.c 100644 root:root fb5354f370d7a7d8290e45168a1a0bfb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_float.c 100644 root:root e5fba593c98b2dfea4f144c8c897b468 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_s32.c 100644 root:root 09ee38782fb7740eae00677e74684a7a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_u32.c 100644 root:root 8c4c7e6b65d45644dfc17cbaca5de92a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_s32.c 100644 root:root 2ac088b0b6e57143ee7817d45299e479 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_u32.c 100644 root:root 992b3ef4455e0fe7e07e565ea74ea7e8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_bit.c 100644 root:root 38841c82c388dae5f1f9451907da8b68 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_float.c 100644 root:root 37771b4d24f191ba2f3dd4dd7773d6f8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_u32.c 100644 root:root 39f37b4f2ee00f123cdf6de45d1be6b6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_bit.c 100644 root:root 995ff110048b0a18db78980520d5ba00 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_float.c 100644 root:root 58fadd3f915cfe3ca247230c65a0261f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_s32.c 100644 root:root 14a95a56d6b6e7c55e050b85803c52c9 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/corexy_by_hal.c 100644 root:root 09408f64fd458086b36424744396640e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/dbounce.c 100644 root:root 4b3aa36a8c61fa76d55be9e0d25d13b8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ddt.c 100644 root:root 47cf56ed4505c7c3645d653bc6c688d8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/deadzone.c 100644 root:root f3e8821fd41e91d9397f2db446fc16c7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/demux.c 100644 root:root bccbf990203bb91ab7d6d2505699158b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/differential.c 100644 root:root 9fc36be97383973b9ae4a1d780645424 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/div2.c 100644 root:root 3ca334ee9eb7d8a4b4df224e053465a2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/edge.c 100644 root:root fe8a0e13a834b5a15b4db3b00acba7fd -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/eoffset_per_angle.c 100644 root:root d60ec8ba61fa4888eb76c6ed2f0d05c7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/estop_latch.c 100644 root:root 042069c995d4a0d79a0b921e3e8fcc72 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/feedcomp.c 100644 root:root 51ca0619d4e2ba25ac1ad929c722088d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/filter_kalman.c 100644 root:root c33ec72c41047ce46f478baa9a703d1f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/flipflop.c 100644 root:root b86f52377b19796d825dc2473380fa1d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gantry.c 100644 root:root 1bd361cf52b8efa21494f6b8ad842395 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gearchange.c 100644 root:root 3392239f113c31c57519273b5c73553e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gray2bin.c 100644 root:root a39b50f41d9cc4697bad97b2b305d9c2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/histobins.c 100644 root:root 83674e62f0326f8b34006cc175a5f404 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/homecomp.c 100644 root:root 10e668b38ed354c3a12f7c1888e30f8f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/hypot.c 100644 root:root bdd3d99bfa4e8ed70f2d1ea04ef228e6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ilowpass.c 100644 root:root 159d99909e6eb40d66c72bbaf8d2492e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/integ.c 100644 root:root ef24dbd06253d45ff6cf7782143e6cc1 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/invert.c 100644 root:root 4ea0643b46e43d4b6e9b37e9bb6a653a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/joyhandle.c 100644 root:root 7c509ef5072681265ae11d2bd5cfdef8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/knob2float.c 100644 root:root dec0c54e858e96aa30d3ae95dc6e8d3f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/latencybins.c 100644 root:root 48de995b9c5ddd147db9658321f15cdb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit1.c 100644 root:root 4c3e05c7c4c98a71d97630ccd4e2d718 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit2.c 100644 root:root e5a0d84666cfe49a77ed557d67d415df -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit3.c 100644 root:root 4188b41f21863bd8d3cb4e22648579db -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit_axis.c 100644 root:root 933c5eab9e151f8216260a322608a6da -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lincurve.c 100644 root:root ac467f92def2184d4629cf2099db9cbf -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/logic.c 100644 root:root bcc5e5316a2fb219ec44eca816444203 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lowpass.c 100644 root:root 2ebf29bdc8abca400a7fe981a8be8a32 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lut5.c 100644 root:root 1aca2c9d9e89a5a04e2131302821a5d8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/maj3.c 100644 root:root 275409e539af4100680d21888f5fd206 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/match8.c 100644 root:root ce7ca3c1e5ee3661178a0f5757a15e2c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/max31855.c 100644 root:root 9525d23b020b6b5b1af91475c7817a31 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 62a3bb6c12ecb9191b3fa2619403a2f9 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/message.c 100644 root:root 7344878077d0df78125d60fd2fcf5066 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/millturn.c 100644 root:root 366b13d106173d6f0a1cb4875350ae6c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/minmax.c 100644 root:root 5fd9c29a48025f3f5db6d33a2ee9cbe8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/moveoff.c 100644 root:root 90c3ef494e6dfd5de8950d800dc833be -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mult2.c 100644 root:root 2a289ce22fdec5f93fd238a1e6228801 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiclick.c 100644 root:root 6c0abefa7ead9b2c0765b10e384ce7a6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiswitch.c 100644 root:root 60f3d24d2efcff4c359557ac6832e761 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux16.c 100644 root:root 451fd92305701d1c620cfaee16b6a93b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux2.c 100644 root:root 6416f749fba5603031ac8a9ef396fc24 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux4.c 100644 root:root aea757d79141375951d738d7500046eb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux8.c 100644 root:root f7007ab41e84737db8c6b3739d451a5f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/near.c 100644 root:root e4c46b0d1cd9c863e3be4067a03d50fa -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/not.c 100644 root:root a7705dab9565ce652cea66572c181c2c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/offset.c 100644 root:root d50384b63fbf976d935e110376901272 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ohmic.c 100644 root:root a90098265a37b26a9fb8acf260dec110 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/oneshot.c 100644 root:root bb5ac73484f8f9518716b221ccfb8a60 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/or2.c 100644 root:root f68bdc39bff3495b01db5fcbc3ea5db9 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/orient.c 100644 root:root ce8c1e73c8e9bb7329d2ebaad378e41c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/plasmac.c 100644 root:root 16d5200bc8801420453a8b54866dd8c2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sample_hold.c 100644 root:root 496e49fd8b04c2e0d43552e7f65697d1 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scale.c 100644 root:root a54f2e8608785595a9ea505971fc8f66 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 41abb2a8017e3d114ff06c6926338e06 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/select8.c 100644 root:root fe17ee289380b4a102edd9c142cf9e80 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_axis_hardware.c 100644 root:root c76ab7867696d0db44cf6eb0bf6c5e9d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_home_switch.c 100644 root:root 7c126879601a389321fb6965b6e964fe -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 4ce5166aaf504445c4e427aa1c4e96ab -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_parport.c 100644 root:root d3763f98e7c7966ac839be4948b9ca4e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_spindle.c 100644 root:root cf3e8f3a7dcf3566545f886665c36877 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/simple_tp.c 100644 root:root 65c0112216fd0e9552bd0b650b891935 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sphereprobe.c 100644 root:root 0ad2ef4462911ba01a12c19775cb80dc -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle.c 100644 root:root 03150cddd4ef714f62799098132a9d20 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle_monitor.c 100644 root:root bbc344e7591975604752c9112772d40d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/steptest.c 100644 root:root 09a8edb3902927b8c24f091f4e91d145 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sum2.c 100644 root:root a76b2a49081ab3c95850e637d8845013 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thc.c 100644 root:root 30903fb6cb984cd8b1f3cbfa7b7a54f2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thcud.c 100644 root:root 0d919e245a61ee59c97bb81a36c30ef5 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/threadtest.c 100644 root:root dc6cc12fa7ed32a3e7f849e6873fa301 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/time.c 100644 root:root df71ee48ac6905026fd0ea51762762cb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelay.c 100644 root:root 16684d9a7b675d8177096f2659057b64 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelta.c 100644 root:root 79e2da4170e391727d253692df56e370 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tof.c 100644 root:root 4222b4184fc80049936cbc994f86e44e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle.c 100644 root:root 1c5905660cd7c45f738bd17ff045f7c6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle2nist.c 100644 root:root 13786a3930737f876a8d76abf6be2d2e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ton.c 100644 root:root 4fb027beee9b4cff41d2945227da798d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tp.c 100644 root:root 84832b862e378d236902ff8ccfde6226 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_bit.c 100644 root:root b8be5e57226c5fb4f1e06cadf3f08464 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_float.c 100644 root:root 7f49474ca3ccdb06b43ff8a8bc0e692b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/updown.c 100644 root:root 674f8686763265d20039160e21a5b428 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/userkins.c 100644 root:root bc24b5a19436ebcf165c24ee6f7b8b7b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/wcomp.c 100644 root:root ca0b5654943c05b2acd9e04e6c285b5a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xhc_hb04_util.c 100644 root:root fe2faa9e6488cb00d79fe725f9c55078 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xor2.c 100644 root:root 909bfd593cd5cada63e3f92da8f24265 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 8f3cd56341a61872295b094912231466 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs.c 100644 root:root 60aefc3bce584df3b1c105f27249c3e3 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs_s32.c 100644 root:root dbc1ada4f57ca7f5f365f9e9bba65fca +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/and2.c 100644 root:root a124cccdf2ccc17e65db7b73d1f96bde +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/anglejog.c 100644 root:root 147d5ee996fbd670a77340a73d6984e7 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/axistest.c 100644 root:root e54826c35c700c90893bfb7a3469b86d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bin2gray.c 100644 root:root d895bea883620f0dac48c65b5a50e363 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/biquad.c 100644 root:root 24d5406948b716a2b38cb4c5397b74ca +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitslice.c 100644 root:root 8862b18393540a0587eaba9674f9c986 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitwise.c 100644 root:root d174829facf6ec3eeb128be0aaa50904 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bldc.c 100644 root:root 7da2a46576ebdbf8e8ddd75d4782f44b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/blend.c 100644 root:root 23052a21259c85c33406761caa83f5a9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/carousel.c 100644 root:root 4f29f016d833e1203f87af1abc4f2f9d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/charge_pump.c 100644 root:root d76dc2e3624302ae56240644acc95926 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke2.c 100644 root:root 95a8d7be4dc92ff460bec330aba9d3f7 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke3.c 100644 root:root 4d11f43338d4af258ee5c33fa5e8733e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarkeinv.c 100644 root:root 93db2039408d57d2d0eab76d878fd5c4 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/comp.c 100644 root:root 943d1723c06cc1aa9445e41ed041053a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/constant.c 100644 root:root 1a67783a992db13e8a7e7c06ff46fc83 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_float.c 100644 root:root d9bceb12ad915755ed30938fd89f33a0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_s32.c 100644 root:root 27a2f5175b962d2709c35f8d86fd1637 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_u32.c 100644 root:root e8de6196cdedd54f5cf4babab600a0f6 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_s32.c 100644 root:root ec761ee535c111f074474a8954f299f9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_u32.c 100644 root:root a851e7bcc15614231c13531c9bca7217 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_bit.c 100644 root:root 362eb81872aff932553cba860db68470 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_float.c 100644 root:root 340c0c25ac9c36f4c36044e02fb2c1c9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_u32.c 100644 root:root 1a7455f246c8cc6d2f5152b70eb41951 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_bit.c 100644 root:root 8dcd4d2cd75592ae097b4c5ebf8266c1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_float.c 100644 root:root 0f701c077d556d5cbbcf62c753f5e41b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_s32.c 100644 root:root 9d7e86a0c589a52002a4f6ddcd171dc3 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/corexy_by_hal.c 100644 root:root aa265f65e26bfc9a4fbe3460c5b6b984 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/dbounce.c 100644 root:root 114915429c6d529d827a1013aa331e27 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ddt.c 100644 root:root 5684e417d7ca6d18d26c3045a4ecae6e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/deadzone.c 100644 root:root 170c9d3e795248648e8e87f3cff87f74 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/demux.c 100644 root:root 5279b239cf935a992f8cc3c1901f1223 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/differential.c 100644 root:root 8b721267cc307a867a71e7ac181242ab +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/div2.c 100644 root:root 3ea9cadd898ad079fb516bfccd9b87f0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/edge.c 100644 root:root f66b5db3b097691a6739c6e7189e854c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/eoffset_per_angle.c 100644 root:root 7efa8940ca7ca3ea591b6ef8941de12e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/estop_latch.c 100644 root:root 94fd28d6eae663deb70966bde30c89cd +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/feedcomp.c 100644 root:root d9340e9721ac05b814436f660a888305 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/filter_kalman.c 100644 root:root e223b1067f4f59f52efcbbc558fa124f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/flipflop.c 100644 root:root 8c32cfb33286119f958e977f7a04bd6c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gantry.c 100644 root:root 93d9d5922a73e7fa1975114ed80fc441 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gearchange.c 100644 root:root e04192605f768d7604433b34a017d47c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gray2bin.c 100644 root:root be582caebd72b32322df617b6f3761b1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/histobins.c 100644 root:root 54e01584a05cc1b1bccd8160a59361c3 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/homecomp.c 100644 root:root f89cf475ff326bbabc2bc9c32902a3cd +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/hypot.c 100644 root:root aee431bd5adb56260d5a74e0ac2829c2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ilowpass.c 100644 root:root d9ea0bf4080261453e488028f0cead2a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/integ.c 100644 root:root d241b1f949a6268c6ef6913a81216801 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/invert.c 100644 root:root 93f859066bac591c4df54bc2fd26536d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/joyhandle.c 100644 root:root 8dbe058a94b358779c9e36aba8378b3b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/knob2float.c 100644 root:root a06cb379fde3425750a0b53e2432b31b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/latencybins.c 100644 root:root e562504cc10b8d203a4f94783905b474 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit1.c 100644 root:root 05b1cbe446c84af2739c2c6891e7812d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit2.c 100644 root:root f5af777e8159171136524d99e372ebf0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit3.c 100644 root:root 69ace8d63b3d3911b5b6ee6044ff4928 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit_axis.c 100644 root:root 7d75748341f3d9698c0289bd693bfc46 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lincurve.c 100644 root:root c137c02ae7f3676b5ab51c3fb7e75e40 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/logic.c 100644 root:root ef07561602488a2c4ea1f894281c7477 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lowpass.c 100644 root:root f51fc717ea4da3b5527a3fc451c2234f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lut5.c 100644 root:root ebba329e9440dc5b0f205958ce496931 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/maj3.c 100644 root:root 1bb4c4a7e430ff128bb5d2ac5057c1be +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/match8.c 100644 root:root b12870e7bf683a5d81c633cbb63ffe0b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/max31855.c 100644 root:root 33a6bf0ef4f4b24c77f01c55e42c4be5 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root fda1f4bec3528cb2c610d60849026f45 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/message.c 100644 root:root 491703214c9f1b0f33f3dd2c876f7ce9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/millturn.c 100644 root:root 7a963a542b8b2c0aa9ebffeeb09bae94 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/minmax.c 100644 root:root f54ec381411cb317360f44feec9ff636 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/moveoff.c 100644 root:root 1033b8a6c2ea6905b8a62a256ee44b13 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mult2.c 100644 root:root 80004e5526adfe920de6969e370d73fd +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiclick.c 100644 root:root aac6be0904c09641894bd3a0ddf532f7 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiswitch.c 100644 root:root d33f07a4095879a91949ee8d68442622 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux16.c 100644 root:root b1a68ae9603ad1368d34b1e2c219aaf6 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux2.c 100644 root:root 6638e718b89ab4985d4a1ea0f73ebd5a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux4.c 100644 root:root 03090a11fc76d28faeaf4785f438400f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux8.c 100644 root:root f0b6fb4cd4a640638709dad6a611fe1c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/near.c 100644 root:root 869b77c9f2dc02153d854fa225ade30d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/not.c 100644 root:root efb051ea969424b3c92d5ee51a714f93 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/offset.c 100644 root:root f01d07371a478e01502ed9b2f505f0f8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ohmic.c 100644 root:root e07a209e95231e6021113180bb1195b4 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/oneshot.c 100644 root:root 59789d34d2c0e47b555da6676c94ad05 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/or2.c 100644 root:root 9474ca81a99fe48f8331b4dcabf7938b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/orient.c 100644 root:root e9879b12dee25a0bba1cded8ef1d81e9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/plasmac.c 100644 root:root acff8b9d744e718ceffcf98ce60c37c7 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sample_hold.c 100644 root:root f02e6ea46dc2c979c9a6e5c5c1c60cc6 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scale.c 100644 root:root ca5f81eaedb5fdc220746f4335d738cb +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 03e1952b2a6714b6ae4ca5d22319f7d8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/select8.c 100644 root:root 12466d32ae8492bdc63b05b8b908914b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_axis_hardware.c 100644 root:root 62123afa246cbf40f07233523138b9f8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_home_switch.c 100644 root:root 47e629c64e975ddf5065fa99c3651f29 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 225d8d78b054ef47cb79ac86b527706d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_parport.c 100644 root:root 47a20c59b7f5160801f4cb513468c1b8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_spindle.c 100644 root:root 2b189efec5553edba8aaf46c463e29a5 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/simple_tp.c 100644 root:root a15ce0ba0d6c56ae209903aa3fff18c7 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sphereprobe.c 100644 root:root 2da2bf6f53939e652a946d0670e11245 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle.c 100644 root:root 7975631e5ceff45e1daaa080a1aadaa3 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle_monitor.c 100644 root:root ac66442810cd372f076a8b0fd9915273 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/steptest.c 100644 root:root bb40bc10fee5f2858aae3b37f2381334 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sum2.c 100644 root:root 4c9e595836a670fa57b1a8be2ed50ac2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thc.c 100644 root:root 78fba8bead605100b5d96ee1e2d02db0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thcud.c 100644 root:root 954f6f11de9227e0f481767806e33de4 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/threadtest.c 100644 root:root ad9cd59847fc5a5f365ba6b4bf964171 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/time.c 100644 root:root c310f7cb29b78128257d6d2e43a4b8e6 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelay.c 100644 root:root d4a4d64c660fbcf0d90850d496f77367 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelta.c 100644 root:root 6841490b875d6868cf63da5a80dc0c11 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tof.c 100644 root:root ce643499a733c56772540986c1598b1d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle.c 100644 root:root 1cd7360efa2c8b7f0d923e57b23fe982 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle2nist.c 100644 root:root f04b69a1449963373309857a9c963f79 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ton.c 100644 root:root c439c1a2b9616e696313a5ec0efa78e2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tp.c 100644 root:root 5ca24865d0043a53e68ea0c664d6ee6b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_bit.c 100644 root:root 1ce795e65c7d0b85494451688e151a59 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_float.c 100644 root:root 01f43e31794c47ef7f33b850c7247f3f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/updown.c 100644 root:root a02df87a690660a5b6b2ab8e3c8275c1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/userkins.c 100644 root:root 43fc11a13fd917e0b522930398e6512c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/wcomp.c 100644 root:root 931d2c0876e81efcc681276f1b985635 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xhc_hb04_util.c 100644 root:root 59cfd6fe361510d56df15ac7ba7e5d9b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xor2.c 100644 root:root a5f1010b941d536e283905c20c59d111 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 51e308f5f77d8885a24cc8d229297d01 File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_7i65.c 100644 root:root d68d67ada2ed76c0b86cb6dced14d967 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_uart.c 100644 root:root 1db89215039a89171690b56a15c5624e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/serport.c 100644 root:root 834f516cfb48b5a9c0a058a99c22abd0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 9e174da9e19fc0702764d1bdb79e9aeb +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_uart.c 100644 root:root 7142ffea1a819eb6400b30e7e5f98336 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/serport.c 100644 root:root 967e68c9f1da6c8669f283070fa40047 File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps/thermistor.c 100644 root:root 599d78776b3b12bb606bd40530692e17 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps/thermistor.c 100644 root:root 7ed3a0c2291dad283efba2ef32f147b8 File: /usr/src/debug/linuxcnc-2.9.1/src/rtapi 40755 root:root @@ -3029,2 +3029,2 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/rtapi/uspace_rtapi_string.c 100644 root:root e93709d53c7b25f0358ac01589652a43 -RPMIdentity: 903603d2cb8400f9c252b24579fafdaaba9fa43455ae3928ac2fc8e66e9e9eac2da2ab6a5d63eb5148f2dbfbcffe2d7a877bc9c695c224b7519afeb66c4d5f1e +RPMIdentity: d0af09e8075762645250f661b255ac5293b056a5ac33ab9738b3134dad0a46ec2aa540ff2f50d26200b8fbf9423836af74fe3a5a593708ec41738c7e6f4e4d65