<86>Jun 13 10:41:28 userdel[2586851]: delete user 'rooter'
<86>Jun 13 10:41:28 userdel[2586851]: removed group 'rooter' owned by 'rooter'
<86>Jun 13 10:41:28 groupadd[2586856]: group added to /etc/group: name=rooter, GID=627
<86>Jun 13 10:41:28 groupadd[2586856]: group added to /etc/gshadow: name=rooter
<86>Jun 13 10:41:28 groupadd[2586856]: new group: name=rooter, GID=627
<86>Jun 13 10:41:28 useradd[2586860]: new user: name=rooter, UID=627, GID=627, home=/root, shell=/bin/bash
<86>Jun 13 10:41:28 userdel[2586867]: delete user 'builder'
<86>Jun 13 10:41:28 userdel[2586867]: removed group 'builder' owned by 'builder'
<86>Jun 13 10:41:28 userdel[2586867]: removed shadow group 'builder' owned by 'builder'
<86>Jun 13 10:41:28 groupadd[2586872]: group added to /etc/group: name=builder, GID=628
<86>Jun 13 10:41:28 groupadd[2586872]: group added to /etc/gshadow: name=builder
<86>Jun 13 10:41:28 groupadd[2586872]: new group: name=builder, GID=628
<86>Jun 13 10:41:28 useradd[2586876]: new user: name=builder, UID=628, GID=628, home=/usr/src, shell=/bin/bash
/usr/src/in/srpm/perl-PerlIO-gzip-0.20-alt1.2.src.rpm: The use of such a license name is ambiguous: GPL
/usr/src/in/srpm/perl-PerlIO-gzip-0.20-alt1.2.src.rpm: The use of such a license name is ambiguous: Artistic
warning: user igor does not exist - using root
warning: group igor does not exist - using root
warning: user igor does not exist - using root
warning: group igor does not exist - using root
<13>Jun 13 10:41:31 rpmi: libgdbm-1.8.3-alt10 1454943334 installed
<13>Jun 13 10:41:31 rpmi: libgdbm-devel-1.8.3-alt10 1454943334 installed
<13>Jun 13 10:41:31 rpmi: libdb4.7-devel-4.7.25-alt9 1490438479 installed
<13>Jun 13 10:41:32 rpmi: perl-devel-1:5.28.2-alt3 sisyphus+246858.100.1.1 1582562013 installed
<13>Jun 13 10:41:32 rpmi: zlib-devel-1.2.11-alt1 sisyphus+221902.6000.4.1 1550601058 installed
Building target platforms: i586
Building for target i586
Wrote: /usr/src/in/nosrpm/perl-PerlIO-gzip-0.20-alt1.2.nosrc.rpm
Installing perl-PerlIO-gzip-0.20-alt1.2.src.rpm
Building target platforms: i586
Building for target i586
Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.41109
+ umask 022
+ /bin/mkdir -p /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ rm -rf PerlIO-gzip-0.20
+ echo 'Source #0 (PerlIO-gzip-0.20.tar.gz):'
Source #0 (PerlIO-gzip-0.20.tar.gz):
+ /bin/gzip -dc /usr/src/RPM/SOURCES/PerlIO-gzip-0.20.tar.gz
+ /bin/tar -xf -
+ cd PerlIO-gzip-0.20
+ /bin/chmod -c -Rf u+rwX,go-w .
+ exit 0
Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.78279
+ umask 022
+ /bin/mkdir -p /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ cd PerlIO-gzip-0.20
+ perl_vendor_build
+ export PERL_EXTUTILS_AUTOINSTALL=--skip
+ PERL_EXTUTILS_AUTOINSTALL=--skip
+ export XSUBPP_STATIC_XS=1
+ XSUBPP_STATIC_XS=1
+ _perl_vendor_fixin
+ find . -type f -print0
+ xargs -r0 /usr/bin/subst -p '1s,^#![[:space:]]*\([^[:space:]]*/\)\?perl\([^/[:alpha:][:space:]][^/[:space:]]*\)\?\([[:space:]]\|$\),#!/usr/bin/perl\3,'
+ /bin/grep -qs -Ew '((dist|module)_name|Build_PL|Module::Build)' Build.PL
+ _perl_vendor_MM_build
+ : looking for PREREQ dependencies
+ /usr/bin/perl Makefile.PL PRINT_PREREQ=1
+ tee .perl.req
+ : writing Makefile
+ /usr/bin/perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for PerlIO::gzip
+ : running make
+ make -j8 'OPTIMIZE=-pipe -frecord-gcc-switches -Wall -g -O2 -march=i586 -mtune=generic' 'CP=/bin/cp -p'
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
Running Mkbootstrap for gzip ()
chmod 644 "gzip.bs"
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
cp gzip.pm blib/lib/PerlIO/gzip.pm
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
"/usr/bin/perl" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' gzip.xs > gzip.xsc
mv gzip.xsc gzip.c
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
gcc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -frecord-gcc-switches -Wall -g -O2 -march=i586 -mtune=generic -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/perl5/CORE" gzip.c
In file included from /usr/lib/perl5/CORE/perl.h:5310,
from gzip.xs:13:
gzip.xs: In function 'PerlIOGzip_getarg':
/usr/lib/perl5/CORE/embed.h:536:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized]
536 | #define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b)
| ^~~~~~~~~~~~
gzip.xs:675:24: note: 'mode' was declared here
675 | register const char *mode;
| ^~~~
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
rm -f blib/arch/auto/PerlIO/gzip/gzip.so
gcc -lpthread -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \
-lz \
-L/usr/lib/perl5/CORE -lperl -lpthread
chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
+ : running tests
+ LD_BIND_NOW=1
+ PERL_DL_NONLAZY=1
+ /usr/bin/make test 'CP=/bin/cp -p'
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/read.t ... ok
t/write.t .. ok
All tests successful.
Files=2, Tests=561, 1 wallclock secs ( 0.08 usr 0.00 sys + 0.60 cusr 0.03 csys = 0.71 CPU)
Result: PASS
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
+ exit 0
Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.67268
+ umask 022
+ /bin/mkdir -p /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ /bin/chmod -Rf u+rwX -- /usr/src/tmp/perl-PerlIO-gzip-buildroot
+ :
+ /bin/rm -rf -- /usr/src/tmp/perl-PerlIO-gzip-buildroot
+ cd PerlIO-gzip-0.20
+ perl_vendor_install
+ /bin/grep -qs -Ew Build_PL Build.PL
+ /bin/grep -qs -Ew '(dist|module)_name' Build.PL
+ _perl_vendor_MM_install
+ : installing
+ make 'INSTALL=/bin/install -p' 'CP=/bin/cp -p' DESTDIR=/usr/src/tmp/perl-PerlIO-gzip-buildroot PREFIX=/usr INSTALLDIRS=vendor pure_install
make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/auto/PerlIO/gzip/gzip.so
Installing /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/PerlIO/gzip.pm
make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20'
+ _perl_vendor_check_buildroot
+ : prompting for files that contain /usr/local
+ find /usr/src/tmp/perl-PerlIO-gzip-buildroot -type f -exec /bin/grep -FH /usr/local '{}' ';'
Binary file /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/auto/PerlIO/gzip/gzip.so matches
+ : prompting for files that contain /tmp
+ find /usr/src/tmp/perl-PerlIO-gzip-buildroot -type f -not -name .packlist -exec /bin/grep -FH /tmp '{}' ';'
+ _perl_vendor_save_prereq
+ /bin/grep -F 'perl(' .perl.req
+ /usr/lib/rpm/brp-alt
Cleaning files in /usr/src/tmp/perl-PerlIO-gzip-buildroot (auto)
removed './usr/lib/perl5/auto/PerlIO/gzip/.packlist'
mode of './usr/lib/perl5/auto/PerlIO/gzip/gzip.so' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--)
Verifying and fixing files in /usr/src/tmp/perl-PerlIO-gzip-buildroot (binconfig,pkgconfig,libtool,desktop)
Checking contents of files in /usr/src/tmp/perl-PerlIO-gzip-buildroot/ (default)
Compressing files in /usr/src/tmp/perl-PerlIO-gzip-buildroot (auto)
Adjusting library links in /usr/src/tmp/perl-PerlIO-gzip-buildroot
./usr/lib:
Verifying ELF objects in /usr/src/tmp/perl-PerlIO-gzip-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=normal)
Hardlinking identical .pyc and .pyo files
Processing files: perl-PerlIO-gzip-0.20-alt1.2
Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.67268
+ umask 022
+ /bin/mkdir -p /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ cd PerlIO-gzip-0.20
+ DOCDIR=/usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20
+ export DOCDIR
+ rm -rf /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20
+ /bin/mkdir -p /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20
+ cp -prL Changes README /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20
+ chmod -R go-w /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20
+ chmod -R a+rX /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20
+ exit 0
Finding Provides (using /usr/lib/rpm/find-provides)
Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.7XdOxv
find-provides: running scripts (debuginfo,lib,pam,perl,pkgconfig,python,shell)
Finding Requires (using /usr/lib/rpm/find-requires)
Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.SZTkFv
find-requires: running scripts (cpp,debuginfo,files,lib,pam,perl,pkgconfig,pkgconfiglib,python,rpmlib,shebang,shell,static,symlinks,systemd-services)
/usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/PerlIO/gzip.pm syntax OK
Provides: perl(PerlIO/gzip.pm) = 0.200
Requires: /usr/lib/perl5, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.4), libperl-5.28.so >= set:oix0Pc9UyXw0DZ82Xj44lns11tizkGxLQYnNObTf1zHaYXQ2KTWm8ki4CdkuZ2Ji2wtOuIJeIEZ9Tx0RV2rzQkwhdIJyhT8DeBEnIL8VEU6WgxnHrEZACZvJAS0ZaIJOEni8ux2GefOYI0, libpthread.so.0(GLIBC_2.0), libz.so.1 >= set:khb6pwmWdIhpAOoqvxaG1, perl(XSLoader.pm), rtld(GNU_HASH)
Requires(rpmlib): rpmlib(SetVersions)
Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files)
Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.oNywww
Creating perl-PerlIO-gzip-debuginfo package
Processing files: perl-PerlIO-gzip-debuginfo-0.20-alt1.2
Finding Provides (using /usr/lib/rpm/find-provides)
Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.NhP48v
find-provides: running scripts (debuginfo)
Finding Requires (using /usr/lib/rpm/find-requires)
Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.D3Hr8v
find-requires: running scripts (debuginfo)
Requires: perl-PerlIO-gzip = 0.20-alt1.2, debug(libc.so.6), debug(libperl-5.28.so), debug(libpthread.so.0), debug(libz.so.1)
Adding to perl-PerlIO-gzip-debuginfo a strict dependency on perl-PerlIO-gzip
Wrote: /usr/src/RPM/RPMS/i586/perl-PerlIO-gzip-0.20-alt1.2.i586.rpm
Wrote: /usr/src/RPM/RPMS/i586/perl-PerlIO-gzip-debuginfo-0.20-alt1.2.i586.rpm
4.71user 0.67system 0:09.52elapsed 56%CPU (0avgtext+0avgdata 53492maxresident)k
0inputs+0outputs (0major+229956minor)pagefaults 0swaps
/.out/perl-PerlIO-gzip-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: GPL
/.out/perl-PerlIO-gzip-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: Artistic
/.out/perl-PerlIO-gzip-debuginfo-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: GPL
/.out/perl-PerlIO-gzip-debuginfo-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: Artistic
10.06user 4.46system 0:19.82elapsed 73%CPU (0avgtext+0avgdata 109032maxresident)k
288inputs+0outputs (0major+537745minor)pagefaults 0swaps