<86>Apr 25 08:41:10 userdel[4067742]: delete user 'rooter' <86>Apr 25 08:41:10 userdel[4067742]: removed group 'rooter' owned by 'rooter' <86>Apr 25 08:41:10 userdel[4067742]: removed shadow group 'rooter' owned by 'rooter' <86>Apr 25 08:41:10 groupadd[4067748]: group added to /etc/group: name=rooter, GID=579 <86>Apr 25 08:41:10 groupadd[4067748]: group added to /etc/gshadow: name=rooter <86>Apr 25 08:41:10 groupadd[4067748]: new group: name=rooter, GID=579 <86>Apr 25 08:41:10 useradd[4067752]: new user: name=rooter, UID=579, GID=579, home=/root, shell=/bin/bash <86>Apr 25 08:41:10 userdel[4067761]: delete user 'builder' <86>Apr 25 08:41:10 userdel[4067761]: removed group 'builder' owned by 'builder' <86>Apr 25 08:41:10 userdel[4067761]: removed shadow group 'builder' owned by 'builder' <86>Apr 25 08:41:10 groupadd[4067772]: group added to /etc/group: name=builder, GID=580 <86>Apr 25 08:41:10 groupadd[4067772]: group added to /etc/gshadow: name=builder <86>Apr 25 08:41:10 groupadd[4067772]: new group: name=builder, GID=580 <86>Apr 25 08:41:10 useradd[4067778]: new user: name=builder, UID=580, GID=580, home=/usr/src, shell=/bin/bash /usr/src/in/srpm/perl-PerlIO-gzip-0.20-alt1.2.src.rpm: The use of such a license name is ambiguous: GPL /usr/src/in/srpm/perl-PerlIO-gzip-0.20-alt1.2.src.rpm: The use of such a license name is ambiguous: Artistic warning: user igor does not exist - using root warning: group igor does not exist - using root warning: user igor does not exist - using root warning: group igor does not exist - using root <13>Apr 25 08:41:13 rpmi: libgdbm-1.8.3-alt10 1454943334 installed <13>Apr 25 08:41:13 rpmi: libgdbm-devel-1.8.3-alt10 1454943334 installed <13>Apr 25 08:41:14 rpmi: libdb4.7-devel-4.7.25-alt9 1490438479 installed <13>Apr 25 08:41:14 rpmi: perl-devel-1:5.28.2-alt3 sisyphus+246858.100.1.1 1582562013 installed <13>Apr 25 08:41:14 rpmi: zlib-devel-1.2.11-alt1 sisyphus+221902.6000.4.1 1550601058 installed Building target platforms: i586 Building for target i586 Wrote: /usr/src/in/nosrpm/perl-PerlIO-gzip-0.20-alt1.2.nosrc.rpm Installing perl-PerlIO-gzip-0.20-alt1.2.src.rpm Building target platforms: i586 Building for target i586 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.98758 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf PerlIO-gzip-0.20 + echo 'Source #0 (PerlIO-gzip-0.20.tar.gz):' Source #0 (PerlIO-gzip-0.20.tar.gz): + /bin/gzip -dc /usr/src/RPM/SOURCES/PerlIO-gzip-0.20.tar.gz + /bin/tar -xf - + cd PerlIO-gzip-0.20 + /bin/chmod -c -Rf u+rwX,go-w . + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.99812 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd PerlIO-gzip-0.20 + perl_vendor_build + export PERL_EXTUTILS_AUTOINSTALL=--skip + PERL_EXTUTILS_AUTOINSTALL=--skip + export XSUBPP_STATIC_XS=1 + XSUBPP_STATIC_XS=1 + _perl_vendor_fixin + find . -type f -print0 + xargs -r0 /usr/bin/subst -p '1s,^#![[:space:]]*\([^[:space:]]*/\)\?perl\([^/[:alpha:][:space:]][^/[:space:]]*\)\?\([[:space:]]\|$\),#!/usr/bin/perl\3,' + /bin/grep -qs -Ew '((dist|module)_name|Build_PL|Module::Build)' Build.PL + _perl_vendor_MM_build + : looking for PREREQ dependencies + /usr/bin/perl Makefile.PL PRINT_PREREQ=1 + tee .perl.req + : writing Makefile + /usr/bin/perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip + : running make + make -j8 'OPTIMIZE=-pipe -frecord-gcc-switches -Wall -g -O2 -march=i586 -mtune=generic' 'CP=/bin/cp -p' make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' Running Mkbootstrap for gzip () chmod 644 "gzip.bs" make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' cp gzip.pm blib/lib/PerlIO/gzip.pm make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' "/usr/bin/perl" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' gzip.xs > gzip.xsc mv gzip.xsc gzip.c make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' gcc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -frecord-gcc-switches -Wall -g -O2 -march=i586 -mtune=generic -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/perl5/CORE" gzip.c In file included from /usr/lib/perl5/CORE/perl.h:5310, from gzip.xs:13: gzip.xs: In function 'PerlIOGzip_getarg': /usr/lib/perl5/CORE/embed.h:536:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] 536 | #define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) | ^~~~~~~~~~~~ gzip.xs:675:24: note: 'mode' was declared here 675 | register const char *mode; | ^~~~ make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' rm -f blib/arch/auto/PerlIO/gzip/gzip.so gcc -lpthread -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ -L/usr/lib/perl5/CORE -lperl -lpthread chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' + : running tests + LD_BIND_NOW=1 + PERL_DL_NONLAZY=1 + /usr/bin/make test 'CP=/bin/cp -p' make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/read.t ... ok t/write.t .. ok All tests successful. Files=2, Tests=561, 1 wallclock secs ( 0.11 usr 0.01 sys + 0.81 cusr 0.03 csys = 0.96 CPU) Result: PASS make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.99009 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/perl-PerlIO-gzip-buildroot + : + /bin/rm -rf -- /usr/src/tmp/perl-PerlIO-gzip-buildroot + cd PerlIO-gzip-0.20 + perl_vendor_install + /bin/grep -qs -Ew Build_PL Build.PL + /bin/grep -qs -Ew '(dist|module)_name' Build.PL + _perl_vendor_MM_install + : installing + make 'INSTALL=/bin/install -p' 'CP=/bin/cp -p' DESTDIR=/usr/src/tmp/perl-PerlIO-gzip-buildroot PREFIX=/usr INSTALLDIRS=vendor pure_install make: Entering directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/auto/PerlIO/gzip/gzip.so Installing /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/PerlIO/gzip.pm make: Leaving directory '/usr/src/RPM/BUILD/PerlIO-gzip-0.20' + _perl_vendor_check_buildroot + : prompting for files that contain /usr/local + find /usr/src/tmp/perl-PerlIO-gzip-buildroot -type f -exec /bin/grep -FH /usr/local '{}' ';' Binary file /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/auto/PerlIO/gzip/gzip.so matches + : prompting for files that contain /tmp + find /usr/src/tmp/perl-PerlIO-gzip-buildroot -type f -not -name .packlist -exec /bin/grep -FH /tmp '{}' ';' + _perl_vendor_save_prereq + /bin/grep -F 'perl(' .perl.req + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/perl-PerlIO-gzip-buildroot (auto) removed './usr/lib/perl5/auto/PerlIO/gzip/.packlist' mode of './usr/lib/perl5/auto/PerlIO/gzip/gzip.so' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--) Verifying and fixing files in /usr/src/tmp/perl-PerlIO-gzip-buildroot (binconfig,pkgconfig,libtool,desktop) Checking contents of files in /usr/src/tmp/perl-PerlIO-gzip-buildroot/ (default) Compressing files in /usr/src/tmp/perl-PerlIO-gzip-buildroot (auto) Adjusting library links in /usr/src/tmp/perl-PerlIO-gzip-buildroot ./usr/lib: Verifying ELF objects in /usr/src/tmp/perl-PerlIO-gzip-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=normal) Hardlinking identical .pyc and .pyo files Processing files: perl-PerlIO-gzip-0.20-alt1.2 Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.93967 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd PerlIO-gzip-0.20 + DOCDIR=/usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20 + export DOCDIR + rm -rf /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20 + /bin/mkdir -p /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20 + cp -prL Changes README /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20 + chmod -R go-w /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20 + chmod -R a+rX /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/share/doc/perl-PerlIO-gzip-0.20 + exit 0 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.hn8HOM find-provides: running scripts (debuginfo,lib,pam,perl,pkgconfig,python,shell) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.yIqTNN find-requires: running scripts (cpp,debuginfo,files,lib,pam,perl,pkgconfig,pkgconfiglib,python,rpmlib,shebang,shell,static,symlinks,systemd-services) /usr/src/tmp/perl-PerlIO-gzip-buildroot/usr/lib/perl5/PerlIO/gzip.pm syntax OK Provides: perl(PerlIO/gzip.pm) = 0.200 Requires: /usr/lib/perl5, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.4), libperl-5.28.so >= set:oix0Pc9UyXw0DZ82Xj44lns11tizkGxLQYnNObTf1zHaYXQ2KTWm8ki4CdkuZ2Ji2wtOuIJeIEZ9Tx0RV2rzQkwhdIJyhT8DeBEnIL8VEU6WgxnHrEZACZvJAS0ZaIJOEni8ux2GefOYI0, libpthread.so.0(GLIBC_2.0), libz.so.1 >= set:khb6pwmWdIhpAOoqvxaG1, perl(XSLoader.pm), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.aClDpL Creating perl-PerlIO-gzip-debuginfo package Processing files: perl-PerlIO-gzip-debuginfo-0.20-alt1.2 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.OvMY2O find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.HyRHWK find-requires: running scripts (debuginfo) Requires: perl-PerlIO-gzip = 0.20-alt1.2, debug(libc.so.6), debug(libperl-5.28.so), debug(libpthread.so.0), debug(libz.so.1) Adding to perl-PerlIO-gzip-debuginfo a strict dependency on perl-PerlIO-gzip Wrote: /usr/src/RPM/RPMS/i586/perl-PerlIO-gzip-0.20-alt1.2.i586.rpm Wrote: /usr/src/RPM/RPMS/i586/perl-PerlIO-gzip-debuginfo-0.20-alt1.2.i586.rpm 7.80user 1.66system 0:14.04elapsed 67%CPU (0avgtext+0avgdata 54220maxresident)k 0inputs+0outputs (0major+231150minor)pagefaults 0swaps /.out/perl-PerlIO-gzip-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: GPL /.out/perl-PerlIO-gzip-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: Artistic /.out/perl-PerlIO-gzip-debuginfo-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: GPL /.out/perl-PerlIO-gzip-debuginfo-0.20-alt1.2.i586.rpm: The use of such a license name is ambiguous: Artistic 14.55user 7.55system 0:26.88elapsed 82%CPU (0avgtext+0avgdata 110668maxresident)k 240inputs+0outputs (0major+534767minor)pagefaults 0swaps