<86>Sep 12 03:59:54 userdel[2227794]: delete user 'rooter' <86>Sep 12 03:59:54 userdel[2227794]: removed group 'rooter' owned by 'rooter' <86>Sep 12 03:59:54 userdel[2227794]: removed shadow group 'rooter' owned by 'rooter' <86>Sep 12 03:59:54 groupadd[2227812]: group added to /etc/group: name=rooter, GID=1796 <86>Sep 12 03:59:54 groupadd[2227812]: group added to /etc/gshadow: name=rooter <86>Sep 12 03:59:54 groupadd[2227812]: new group: name=rooter, GID=1796 <86>Sep 12 03:59:54 useradd[2227837]: new user: name=rooter, UID=1796, GID=1796, home=/root, shell=/bin/bash, from=none <86>Sep 12 03:59:54 userdel[2227872]: delete user 'builder' <86>Sep 12 03:59:54 userdel[2227872]: removed group 'builder' owned by 'builder' <86>Sep 12 03:59:54 userdel[2227872]: removed shadow group 'builder' owned by 'builder' <86>Sep 12 03:59:54 groupadd[2227896]: group added to /etc/group: name=builder, GID=1797 <86>Sep 12 03:59:54 groupadd[2227896]: group added to /etc/gshadow: name=builder <86>Sep 12 03:59:54 groupadd[2227896]: new group: name=builder, GID=1797 <86>Sep 12 03:59:54 useradd[2227912]: new user: name=builder, UID=1797, GID=1797, home=/usr/src, shell=/bin/bash, from=none <13>Sep 12 04:00:01 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432004 installed <13>Sep 12 04:00:01 rpmi: libgdbm-1.8.3-alt10 sisyphus+346222.200.3.2 1716468404 installed <13>Sep 12 04:00:01 rpmi: libexpat-2.5.0-alt1 sisyphus+346180.200.2.1 1716349835 installed <13>Sep 12 04:00:01 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962877 installed <13>Sep 12 04:00:01 rpmi: libp11-kit-1:0.25.5-alt1 sisyphus+352553.100.1.1 1720622573 installed <13>Sep 12 04:00:01 rpmi: libtasn1-4.19.0-alt3 sisyphus+327816.100.1.1 1692802615 installed <13>Sep 12 04:00:01 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Sep 12 04:00:01 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Sep 12 04:00:01 rpmi: ca-certificates-2024.07.01-alt1 sisyphus+351897.100.1.1 1719826350 installed <13>Sep 12 04:00:01 rpmi: ca-trust-0.2.0-alt1 sisyphus+344843.100.1.1 1712743326 installed <13>Sep 12 04:00:01 rpmi: p11-kit-trust-1:0.25.5-alt1 sisyphus+352553.100.1.1 1720622573 installed <13>Sep 12 04:00:01 rpmi: libcrypto3-3.1.7-alt1 sisyphus+356755.100.1.1 1725388416 installed <13>Sep 12 04:00:01 rpmi: libssl3-3.1.7-alt1 sisyphus+356755.100.1.1 1725388416 installed <13>Sep 12 04:00:01 rpmi: python3-3.12.6-alt1 sisyphus+357228.100.1.1 1725970095 installed <13>Sep 12 04:00:01 rpmi: python3-base-3.12.6-alt1 sisyphus+357228.100.1.1 1725970095 installed <13>Sep 12 04:00:01 rpmi: python3-module-py3dephell-0.1.0-alt2 sisyphus+328191.600.5.1 1693609196 installed <13>Sep 12 04:00:01 rpmi: tests-for-installed-python3-pkgs-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>Sep 12 04:00:01 rpmi: rpm-build-python3-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>Sep 12 04:00:01 rpmi: rpm-macros-qt5-webengine-0.4-alt1 sisyphus+293807.20.25.1 1645704818 installed <13>Sep 12 04:00:01 rpmi: rpm-build-tcl-0.6.2-alt1 sisyphus+299320.100.1.1 1651401392 installed <13>Sep 12 04:00:06 rpmi: xorg-proto-devel-2024.1-alt1 sisyphus+343583.40.1.1 1711440649 installed <13>Sep 12 04:00:06 rpmi: libpng16-1.6.42-alt2 sisyphus+339555.100.1.1 1706781682 installed <13>Sep 12 04:00:06 rpmi: libjpeg-2:3.0.2-alt2.1 sisyphus+340135.100.1.1 1707449145 installed <13>Sep 12 04:00:06 rpmi: libwayland-client-1.23.1-alt1.1 sisyphus+356019.140.3.1 1724572111 installed <13>Sep 12 04:00:06 rpmi: gobject-introspection-1.80.1-alt1 sisyphus+344154.100.1.3 1711984694 installed <13>Sep 12 04:00:06 rpmi: libatk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Sep 12 04:00:06 rpmi: libglvnd-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424893 installed <13>Sep 12 04:00:06 rpmi: libboost_system1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:06 rpmi: xml-utils-1:2.12.9-alt1 sisyphus+355784.100.1.1 1724333686 installed <13>Sep 12 04:00:06 rpmi: liblcms2-2.16-alt1 sisyphus+335676.100.1.1 1701682597 installed <13>Sep 12 04:00:06 rpmi: gobject-introspection-x11-1.80.1-alt1 sisyphus+344154.100.1.3 1711984694 installed <13>Sep 12 04:00:06 rpmi: perl-HTTP-Date-6.06-alt1 sisyphus+324527.100.1.1 1688834564 installed <13>Sep 12 04:00:06 rpmi: perl-XML-NamespaceSupport-1.12-alt1 1491296348 installed <13>Sep 12 04:00:06 rpmi: zlib-devel-1.3.1-alt1 sisyphus+342532.100.1.1 1710232285 installed <13>Sep 12 04:00:06 rpmi: libtcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548266 installed <13>Sep 12 04:00:06 rpmi: tcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548266 installed <13>Sep 12 04:00:06 rpmi: libquadmath0-13.2.1-alt4 sisyphus+354645.100.1.1 1723060849 installed <13>Sep 12 04:00:06 rpmi: libkmod-31-alt1 sisyphus+330699.100.1.1 1696072422 installed <13>Sep 12 04:00:06 rpmi: libgomp1-13.2.1-alt4 sisyphus+354645.100.1.1 1723060849 installed <13>Sep 12 04:00:06 rpmi: libwebp7-1.4.0-alt1 sisyphus+345159.200.1.1 1713168663 installed <13>Sep 12 04:00:06 rpmi: libICE-1.1.1-alt1 sisyphus+311428.500.1.1 1670577555 installed <13>Sep 12 04:00:06 rpmi: libfribidi-1.0.15-alt1 sisyphus+350522.100.1.1 1717745768 installed <13>Sep 12 04:00:06 rpmi: libSM-1.2.4-alt1 sisyphus+312057.200.1.1 1671526916 installed <13>Sep 12 04:00:06 rpmi: rpm-build-gir-0.7.3-alt3.1 sisyphus+319393.100.1.1 1682538783 installed <13>Sep 12 04:00:06 rpmi: libatk-gir-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Sep 12 04:00:06 rpmi: libepoxy-1.5.10-alt1 sisyphus+296853.200.2.1 1647631866 installed <13>Sep 12 04:00:06 rpmi: libusb-1.0.27-alt1 sisyphus+347412.100.1.1 1714739651 installed <13>Sep 12 04:00:06 rpmi: libopenblas-0.3.28-alt1 sisyphus+356644.100.1.1 1725289674 installed <13>Sep 12 04:00:06 rpmi: libwayland-server-1.23.1-alt1.1 sisyphus+356019.140.3.1 1724572111 installed <13>Sep 12 04:00:06 rpmi: perl-LWP-MediaTypes-6.04-alt1 sisyphus+225468.100.1.1 1553186684 installed <13>Sep 12 04:00:06 rpmi: perl-Compress-Raw-Zlib-2.206-alt1 sisyphus+335067.600.1.1 1700901499 installed <13>Sep 12 04:00:06 rpmi: perl-libnet-1:3.15-alt1 sisyphus+317310.100.1.1 1679580208 installed <13>Sep 12 04:00:06 rpmi: perl-XML-SAX-Base-1.09-alt1 1494364363 installed <13>Sep 12 04:00:06 rpmi: gtk-builder-convert-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Sep 12 04:00:06 rpmi: libgirepository1.0-1.80.1-alt1 sisyphus+344154.100.1.3 1711984694 installed <13>Sep 12 04:00:06 rpmi: python3-module-Pygments-2.18.0-alt1 sisyphus+347552.100.1.1 1714992955 installed <13>Sep 12 04:00:06 rpmi: libsqlite3-3.46.0-alt1 sisyphus+352354.100.2.1 1721980422 installed <13>Sep 12 04:00:06 rpmi: libnspr-1:4.35-alt1 sisyphus+308164.100.1.1 1665397040 installed <13>Sep 12 04:00:06 rpmi: python3-module-pkg_resources-1:70.3.0-alt1 sisyphus+352532.100.2.1 1720689192 installed <13>Sep 12 04:00:06 rpmi: gcc-c++-common-1.4.28-alt1 sisyphus+348678.100.1.1 1716396142 installed <13>Sep 12 04:00:07 rpmi: libicu74-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702423005 installed <13>Sep 12 04:00:07 rpmi: libltdl7-2.4.7-alt5 sisyphus+341963.200.3.1 1711659208 installed <13>Sep 12 04:00:07 rpmi: libopenjpeg2.0-2.5.2-alt1 sisyphus+341637.100.1.1 1709150017 installed <13>Sep 12 04:00:07 rpmi: libverto-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684803947 installed <13>Sep 12 04:00:07 rpmi: libcom_err-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975345 installed <13>Sep 12 04:00:07 rpmi: libbrotlicommon-1.1.0-alt1 sisyphus+328501.100.1.1 1693598419 installed <13>Sep 12 04:00:07 rpmi: libbrotlidec-1.1.0-alt1 sisyphus+328501.100.1.1 1693598419 installed <13>Sep 12 04:00:07 rpmi: libgraphite2-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605111 installed <13>Sep 12 04:00:07 rpmi: libharfbuzz-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Sep 12 04:00:07 rpmi: libfreetype-2.13.3-alt1 sisyphus+355656.100.1.1 1724221064 installed <13>Sep 12 04:00:07 rpmi: libfontconfig1-2.15.0-alt1 sisyphus+355771.100.2.3 1724337298 installed <13>Sep 12 04:00:07 rpmi: libharfbuzz-gobject-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Sep 12 04:00:07 rpmi: libharfbuzz-gir-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Sep 12 04:00:07 rpmi: libXau-1.0.11-alt1 sisyphus+311428.100.1.1 1670577439 installed <13>Sep 12 04:00:07 rpmi: libXau-devel-1.0.11-alt1 sisyphus+311428.100.1.1 1670577439 installed <13>Sep 12 04:00:07 rpmi: fontconfig-2.15.0-alt1 sisyphus+355771.100.2.3 1724337298 installed Updating fonts cache: <29>Sep 12 04:00:08 fontconfig: Updating fonts cache: succeeded [ DONE ] <13>Sep 12 04:00:08 rpmi: libraqm-0.7.1-alt1 sisyphus+279320.100.1.2 1626503395 installed <13>Sep 12 04:00:08 rpmi: libharfbuzz-icu-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Sep 12 04:00:08 rpmi: libgraphite2-devel-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605111 installed <13>Sep 12 04:00:08 rpmi: libbrotlienc-1.1.0-alt1 sisyphus+328501.100.1.1 1693598419 installed <13>Sep 12 04:00:08 rpmi: libcom_err-devel-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975345 installed <13>Sep 12 04:00:08 rpmi: libverto-devel-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684803947 installed <13>Sep 12 04:00:08 rpmi: icu-utils-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702423005 installed <13>Sep 12 04:00:08 rpmi: libicu-devel-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702423005 installed <13>Sep 12 04:00:08 rpmi: libstdc++13-devel-13.2.1-alt4 sisyphus+354645.100.1.1 1723060849 installed <13>Sep 12 04:00:09 rpmi: gcc13-c++-13.2.1-alt4 sisyphus+354645.100.1.1 1723060849 installed <13>Sep 12 04:00:09 rpmi: libnss-3.104-alt1 sisyphus+357090.100.1.1 1725701973 installed <13>Sep 12 04:00:09 rpmi: python3-module-nss-1.0.1-alt7 sisyphus+333513.61400.73.1 1704656705 installed <13>Sep 12 04:00:09 rpmi: libICE-devel-1.1.1-alt1 sisyphus+311428.500.1.1 1670577555 installed <13>Sep 12 04:00:09 rpmi: libSM-devel-1.2.4-alt1 sisyphus+312057.200.1.1 1671526916 installed <13>Sep 12 04:00:09 rpmi: libraw-0.21.2-alt1 sisyphus+336806.100.1.1 1703007432 installed <13>Sep 12 04:00:09 rpmi: kmod-31-alt1 sisyphus+330699.100.1.1 1696072422 installed <13>Sep 12 04:00:09 rpmi: libquadmath13-devel-13.2.1-alt4 sisyphus+354645.100.1.1 1723060849 installed <13>Sep 12 04:00:09 rpmi: libquadmath-devel-13-alt1 sisyphus+323337.300.1.1 1687267966 installed <13>Sep 12 04:00:09 rpmi: libboost_charconv1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libgfortran5-13.2.1-alt4 sisyphus+354645.100.1.1 1723060849 installed <13>Sep 12 04:00:09 rpmi: tcl-devel-8.6.13-alt1 sisyphus+310696.100.1.1 1669548266 installed <13>Sep 12 04:00:09 rpmi: libpng-devel-1.6.42-alt2 sisyphus+339555.100.1.1 1706781682 installed <13>Sep 12 04:00:09 rpmi: perl-File-Listing-6.16-alt1 sisyphus+325783.100.1.1 1690559356 installed <13>Sep 12 04:00:09 rpmi: libboost_atomic1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libboost_contract1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libboost_chrono1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libboost_timer1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libboost_thread1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libboost_type_erasure1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libOpenGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424893 installed <13>Sep 12 04:00:09 rpmi: libGLES-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424893 installed <13>Sep 12 04:00:09 rpmi: libwayland-cursor-1.23.1-alt1.1 sisyphus+356019.140.3.1 1724572111 installed <13>Sep 12 04:00:09 rpmi: libwayland-egl-4:18.1.0-alt1.1 sisyphus+356019.140.3.1 1724572111 installed <13>Sep 12 04:00:09 rpmi: libflif-0.4-alt1 sisyphus+343861.100.1.1 1711656717 installed <13>Sep 12 04:00:09 rpmi: groff-base-1.22.3-alt2 sisyphus+346264.200.2.1 1716421475 installed <13>Sep 12 04:00:09 rpmi: libpipeline-1.5.7-alt1_1 sisyphus+312433.100.1.1 1671879773 installed <13>Sep 12 04:00:09 rpmi: libmodbus-3.1.10-alt1 sisyphus+326185.100.1.1 1690851977 installed <13>Sep 12 04:00:09 rpmi: openldap-common-2.6.8-alt1 sisyphus+351621.100.1.1 1719420449 installed <13>Sep 12 04:00:09 rpmi: wayland-devel-1.23.1-alt1.1 sisyphus+356019.140.3.1 1724572111 installed <13>Sep 12 04:00:09 rpmi: libwayland-client-devel-1.23.1-alt1.1 sisyphus+356019.140.3.1 1724572111 installed <13>Sep 12 04:00:09 rpmi: libxkbcommon-1.7.0-alt1.1 sisyphus+343672.100.1.1 1711490810 installed <13>Sep 12 04:00:09 rpmi: libgudev-1:238-alt1 sisyphus+324364.100.1.1 1688646144 installed <13>Sep 12 04:00:09 rpmi: libboost_python3-1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:09 rpmi: libxblas-1.0.248-alt2 sisyphus+285045.40.2.1 1631388330 installed <13>Sep 12 04:00:10 rpmi: liblapack-1:3.8.0-alt7 sisyphus+340675.300.1.1 1707908338 installed <13>Sep 12 04:00:10 rpmi: python3-module-numpy-1:1.26.5-alt1 sisyphus+352832.100.1.1 1720965091 installed <13>Sep 12 04:00:10 rpmi: libboost_numpy3-1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:10 rpmi: libxshmfence-1.3.2-alt1 sisyphus+311428.400.1.1 1670577525 installed <13>Sep 12 04:00:10 rpmi: libpciaccess-1:0.18.1-alt1 sisyphus+343583.300.1.1 1711440789 installed <13>Sep 12 04:00:10 rpmi: libdrm-1:2.4.122-alt1 sisyphus+352241.100.1.1 1720177129 installed <13>Sep 12 04:00:10 rpmi: less-633-alt1 sisyphus+328181.300.2.1 1693321749 installed <13>Sep 12 04:00:10 rpmi: perl-Try-Tiny-0.31-alt1 sisyphus+290597.100.1.1 1637915507 installed <13>Sep 12 04:00:10 rpmi: perl-IO-Socket-IP-0.42-alt1 sisyphus+325815.100.1.2 1690571193 installed <13>Sep 12 04:00:10 rpmi: perl-Module-Load-0.36-alt1 sisyphus+258992.100.1.1 1601543407 installed <13>Sep 12 04:00:10 rpmi: perl-Compress-Raw-Bzip2-2.210-alt1 sisyphus+343108.100.1.3 1710881036 installed <13>Sep 12 04:00:10 rpmi: perl-IO-Compress-Brotli-2:0.004001-alt3 sisyphus+335067.1200.1.1 1700901589 installed <13>Sep 12 04:00:10 rpmi: perl-Clone-0.46-alt1 sisyphus+335067.1100.1.1 1700901562 installed <13>Sep 12 04:00:10 rpmi: perl-HTML-Tagset-3.24-alt1 sisyphus+343117.100.1.3 1710883587 installed <13>Sep 12 04:00:10 rpmi: perl-Term-ANSIColor-5.01-alt1 sisyphus+244783.100.1.2 1579747505 installed <13>Sep 12 04:00:10 rpmi: perl-Data-Dump-1.25-alt1 sisyphus+276551.100.1.1 1625126880 installed <13>Sep 12 04:00:10 rpmi: perl-Filter-1.64-alt1 sisyphus+335067.400.1.1 1700901412 installed <13>Sep 12 04:00:10 rpmi: perl-Encode-3.21-alt1 sisyphus+343095.100.1.1 1710875477 installed <13>Sep 12 04:00:10 rpmi: perl-URI-5.27-alt1 sisyphus+340901.100.1.1 1708180683 installed <13>Sep 12 04:00:10 rpmi: perl-IO-Compress-2.206-alt1 sisyphus+325819.100.1.1 1690563199 installed <13>Sep 12 04:00:10 rpmi: perl-Net-HTTP-6.23-alt1 sisyphus+323470.100.1.1 1687422469 installed <13>Sep 12 04:00:10 rpmi: perl-HTML-Parser-3.82-alt1 sisyphus+343116.100.1.3 1710883258 installed <13>Sep 12 04:00:10 rpmi: perl-WWW-RobotRules-6.02-alt1 1329756211 installed <13>Sep 12 04:00:10 rpmi: perl-Encode-Locale-1.05-alt1 1444608613 installed <13>Sep 12 04:00:10 rpmi: perl-IO-HTML-1.004-alt1 sisyphus+258983.100.1.1 1601542619 installed <13>Sep 12 04:00:10 rpmi: perl-HTTP-Message-6.45-alt1 sisyphus+330728.100.1.1 1696162276 installed <13>Sep 12 04:00:10 rpmi: perl-HTTP-Negotiate-6.01-alt1 1329760563 installed <13>Sep 12 04:00:10 rpmi: perl-libwww-6.77-alt1 sisyphus+343120.100.1.2 1710884405 installed <13>Sep 12 04:00:10 rpmi: perl-XML-LibXML-2.0210-alt8 sisyphus+355798.100.1.1 1724340088 installed <13>Sep 12 04:00:10 rpmi: perl-XML-SAX-1.02-alt1 sisyphus+232322.100.1.1 1560758406 installed <13>Sep 12 04:00:10 rpmi: perl-XML-Simple-2.25-alt2 sisyphus+257498.100.1.1 1599324034 installed <13>Sep 12 04:00:10 rpmi: icon-naming-utils-0.8.90-alt1 sisyphus+276851.100.1.1 1625243947 installed <13>Sep 12 04:00:10 rpmi: icon-theme-adwaita-46.2-alt1 sisyphus+349552.100.1.1 1716810798 installed <13>Sep 12 04:00:10 rpmi: perl-XML-Parser-2.47-alt1 sisyphus+337612.100.1.1 1704201438 installed <13>Sep 12 04:00:10 rpmi: usbids-20240206-alt1 sisyphus+339943.100.1.1 1707270512 installed <13>Sep 12 04:00:10 rpmi: pciids-20240627-alt1 sisyphus+351710.100.1.1 1719555191 installed <13>Sep 12 04:00:10 rpmi: hwdata-0.384-alt1 sisyphus+354460.100.1.1 1722898493 installed <13>Sep 12 04:00:10 rpmi: gtk+3-themes-incompatible-3.20-alt3 1461944560 installed <13>Sep 12 04:00:10 rpmi: libffi-devel-1:3.4.6-alt1 sisyphus+341904.100.1.1 1709474358 installed <13>Sep 12 04:00:10 rpmi: python3-module-zipp-3.20.0-alt1 sisyphus+355527.100.1.1 1724067685 installed <13>Sep 12 04:00:10 rpmi: python3-module-importlib-metadata-8.4.0-alt1 sisyphus+355686.100.2.1 1724318161 installed <13>Sep 12 04:00:10 rpmi: python3-module-markdown-3.7-alt1 sisyphus+356078.100.1.1 1724670316 installed <13>Sep 12 04:00:10 rpmi: python3-module-polib-1.1.1-alt1 sisyphus+282657.100.1.1 1628954165 installed <13>Sep 12 04:00:10 rpmi: python3-module-click-8.1.7-alt1 sisyphus+327424.100.2.1 1695395098 installed <13>Sep 12 04:00:10 rpmi: python3-module-chameleon.core-4.5.4-alt1 sisyphus+348413.100.1.1 1716027273 installed <13>Sep 12 04:00:10 rpmi: python3-module-lingua-4.15.0-alt3 sisyphus+339340.100.1.1 1706573397 installed <13>Sep 12 04:00:11 rpmi: python3-module-babel-1:2.15.0-alt1 sisyphus+353791.100.1.1 1722073848 installed <13>Sep 12 04:00:11 rpmi: python3-module-markupsafe-1:2.1.5-alt1 sisyphus+339663.100.1.1 1706899589 installed <13>Sep 12 04:00:11 rpmi: python3-module-pycparser-2.21-alt1.1 sisyphus+309935.7300.4.1 1668527005 installed <13>Sep 12 04:00:11 rpmi: python3-module-cffi-1.16.0-alt1 sisyphus+333513.10400.71.1 1704539931 installed <13>Sep 12 04:00:11 rpmi: python3-module-cryptography-43.0.0-alt1 sisyphus+353417.100.1.1 1721731007 installed <13>Sep 12 04:00:11 rpmi: python3-module-beaker-1.12.1-alt1 sisyphus+319143.100.1.1 1682256768 installed <13>Sep 12 04:00:11 rpmi: python3-module-mako-1.3.5-alt1 sisyphus+348066.100.1.1 1715708011 installed <13>Sep 12 04:00:11 rpmi: libpython3-3.12.6-alt1 sisyphus+357228.100.1.1 1725970095 installed <13>Sep 12 04:00:11 rpmi: libncurses6-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486705 installed <13>Sep 12 04:00:11 rpmi: libtinfo-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486705 installed <13>Sep 12 04:00:11 rpmi: libncurses-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486705 installed <13>Sep 12 04:00:12 rpmi: python3-dev-3.12.6-alt1 sisyphus+357228.100.1.1 1725970095 installed <13>Sep 12 04:00:12 rpmi: python3-module-setuptools-1:70.3.0-alt1 sisyphus+352532.100.2.1 1720689192 installed <13>Sep 12 04:00:12 rpmi: python3-module-packaging-24.1-alt1 sisyphus+350717.100.2.1 1718268656 installed <13>Sep 12 04:00:12 rpmi: libdevmapper-1.02.200-alt1 sisyphus+355869.100.1.1 1724444357 installed <13>Sep 12 04:00:12 rpmi: mount-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486324 installed <13>Sep 12 04:00:12 rpmi: losetup-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486324 installed <13>Sep 12 04:00:12 rpmi: lsblk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486324 installed <13>Sep 12 04:00:12 rpmi: dmsetup-1.02.200-alt1 sisyphus+355869.100.1.1 1724444357 installed <86>Sep 12 04:00:12 groupadd[2268345]: group added to /etc/group: name=tape, GID=999 <86>Sep 12 04:00:12 groupadd[2268345]: group added to /etc/gshadow: name=tape <86>Sep 12 04:00:12 groupadd[2268345]: new group: name=tape, GID=999 <86>Sep 12 04:00:12 groupadd[2268384]: group added to /etc/group: name=dialout, GID=998 <86>Sep 12 04:00:12 groupadd[2268384]: group added to /etc/gshadow: name=dialout <86>Sep 12 04:00:12 groupadd[2268384]: new group: name=dialout, GID=998 <86>Sep 12 04:00:12 groupadd[2268421]: group added to /etc/group: name=input, GID=997 <86>Sep 12 04:00:12 groupadd[2268421]: group added to /etc/gshadow: name=input <86>Sep 12 04:00:12 groupadd[2268421]: new group: name=input, GID=997 <86>Sep 12 04:00:12 groupadd[2268454]: group added to /etc/group: name=video, GID=996 <86>Sep 12 04:00:12 groupadd[2268454]: group added to /etc/gshadow: name=video <86>Sep 12 04:00:12 groupadd[2268454]: new group: name=video, GID=996 <86>Sep 12 04:00:12 groupadd[2268490]: group added to /etc/group: name=render, GID=995 <86>Sep 12 04:00:12 groupadd[2268490]: group added to /etc/gshadow: name=render <86>Sep 12 04:00:12 groupadd[2268490]: new group: name=render, GID=995 <86>Sep 12 04:00:12 groupadd[2268519]: group added to /etc/group: name=sgx, GID=994 <86>Sep 12 04:00:12 groupadd[2268519]: group added to /etc/gshadow: name=sgx <86>Sep 12 04:00:12 groupadd[2268519]: new group: name=sgx, GID=994 <13>Sep 12 04:00:12 rpmi: udev-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:12 rpmi: dconf-profile-0.1-alt1 sisyphus+325633.340.3.1 1690415358 installed <13>Sep 12 04:00:12 rpmi: boost-python-headers-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_context1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_fiber1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_stacktrace1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_nowide1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_url1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_test1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_serialization1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_random1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_iostreams1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_json1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_regex1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_graph1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_date_time1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:12 rpmi: libboost_container1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:14 rpmi: boost-devel-headers-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:14 rpmi: boost-devel-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:14 rpmi: systemd-modules-common-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:14 rpmi: systemd-sysctl-common-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:14 rpmi: systemd-tmpfiles-common-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:14 rpmi: systemd-utils-filetriggers-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:14 rpmi: libfdisk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486324 installed <13>Sep 12 04:00:14 rpmi: systemd-utils-standalone-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:14 rpmi: libgc-8.2.6-alt1 sisyphus+340965.100.1.1 1708275749 installed <13>Sep 12 04:00:14 rpmi: libmaa-1.5.1-alt1 sisyphus+349905.100.1.1 1717010548 installed <13>Sep 12 04:00:14 rpmi: dict-1:1.13.1-alt2 sisyphus+340952.100.1.1 1708270437 installed <13>Sep 12 04:00:14 rpmi: w3m-0.5.3-alt4.git20200502 sisyphus+328124.5000.1.1 1693252943 installed <13>Sep 12 04:00:14 rpmi: sgml-common-0.6.3-alt15 sisyphus+276099.100.1.1 1624817971 installed <13>Sep 12 04:00:14 rpmi: docbook-dtds-4.5-alt1 sisyphus+276837.100.1.1 1625242123 installed <13>Sep 12 04:00:14 rpmi: docbook-style-xsl-1.79.1-alt4 sisyphus+232871.100.1.1 1561238010 installed <13>Sep 12 04:00:14 rpmi: libxslt-1.1.39-alt1 sisyphus+349406.100.1.1 1716751806 installed <13>Sep 12 04:00:14 rpmi: xsltproc-1.1.39-alt1 sisyphus+349406.100.1.1 1716751806 installed <13>Sep 12 04:00:14 rpmi: asciidoc-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>Sep 12 04:00:14 rpmi: libImageMagick7-common-7.1.1.36-alt1 sisyphus+354667.100.1.1 1723102732 installed <13>Sep 12 04:00:14 rpmi: libzip5-1.10.1-alt1 sisyphus+340170.100.1.1 1707475902 installed <13>Sep 12 04:00:14 rpmi: libwmflite-0.2.8.4-alt13 sisyphus+275127.100.1.1 1624406837 installed <13>Sep 12 04:00:14 rpmi: liblqr-0.4.3-alt1 sisyphus+356629.200.1.1 1725279244 installed <13>Sep 12 04:00:14 rpmi: highway-libs-1.2.0-alt1 sisyphus+350172.100.1.1 1717270054 installed <13>Sep 12 04:00:14 rpmi: libjbig2.1-2.1-alt2 sisyphus+326386.40.6.1 1691148231 installed <13>Sep 12 04:00:14 rpmi: libfftw3-common-3.3.10-alt1 sisyphus+356291.100.2.1 1725355952 installed <13>Sep 12 04:00:14 rpmi: libfftw3-3.3.10-alt1 sisyphus+356291.100.2.1 1725355952 installed <13>Sep 12 04:00:14 rpmi: djvu-common-3.5.28-alt2 sisyphus+346137.200.2.1 1716299621 installed <13>Sep 12 04:00:14 rpmi: libdjvu-3.5.28-alt2 sisyphus+346137.200.2.1 1716299621 installed <13>Sep 12 04:00:14 rpmi: libdav1d_7-1.4.3-alt1 sisyphus+351889.100.1.1 1719823612 installed <13>Sep 12 04:00:14 rpmi: libgts-0.7.6-alt2.drc20130205.1 sisyphus+346279.200.2.1 1716435910 installed <13>Sep 12 04:00:14 rpmi: libpaper2-2:2.1.3-alt1 sisyphus+340967.100.1.1 1708276732 installed <13>Sep 12 04:00:14 rpmi: liblmdb-0.9.32-alt1 sisyphus+342426.100.1.1 1710124288 installed <13>Sep 12 04:00:14 rpmi: libkeyutils-1.6.3-alt1 sisyphus+346336.200.2.2 1716472658 installed <86>Sep 12 04:00:14 groupadd[2273572]: group added to /etc/group: name=_keytab, GID=993 <86>Sep 12 04:00:14 groupadd[2273572]: group added to /etc/gshadow: name=_keytab <86>Sep 12 04:00:14 groupadd[2273572]: new group: name=_keytab, GID=993 <13>Sep 12 04:00:14 rpmi: libkrb5-1.21.3-alt2 sisyphus+351857.100.1.1 1719735141 installed <86>Sep 12 04:00:14 groupadd[2273705]: group added to /etc/group: name=sasl, GID=992 <86>Sep 12 04:00:14 groupadd[2273705]: group added to /etc/gshadow: name=sasl <86>Sep 12 04:00:14 groupadd[2273705]: new group: name=sasl, GID=992 <13>Sep 12 04:00:14 rpmi: libsasl2-3-2.1.28-alt2 sisyphus+343335.100.1.1 1711112544 installed <13>Sep 12 04:00:14 rpmi: libldap2-2.6.8-alt1 sisyphus+351621.100.1.1 1719420449 installed <13>Sep 12 04:00:14 rpmi: libkrb5-ldap-1.21.3-alt2 sisyphus+351857.100.1.1 1719735141 installed <13>Sep 12 04:00:14 rpmi: libkrb5-devel-1.21.3-alt2 sisyphus+351857.100.1.1 1719735141 installed <13>Sep 12 04:00:14 rpmi: libtirpc-1.3.5-alt2 sisyphus+353584.100.1.1 1721897162 installed <13>Sep 12 04:00:14 rpmi: liblz4-1:1.9.4-alt1 sisyphus+309416.100.1.1 1667412981 installed <13>Sep 12 04:00:14 rpmi: libsystemd-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:14 rpmi: libdbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487401 installed <13>Sep 12 04:00:15 rpmi: libavahi-0.8-alt4 sisyphus+344258.100.1.1 1712133856 installed <13>Sep 12 04:00:15 rpmi: libcups-2.4.10-alt2 sisyphus+354418.100.2.1 1722957600 installed <13>Sep 12 04:00:15 rpmi: dbus-tools-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487401 installed <86>Sep 12 04:00:15 groupadd[2273921]: group added to /etc/group: name=messagebus, GID=991 <86>Sep 12 04:00:15 groupadd[2273921]: group added to /etc/gshadow: name=messagebus <86>Sep 12 04:00:15 groupadd[2273921]: new group: name=messagebus, GID=991 <86>Sep 12 04:00:15 useradd[2273937]: new user: name=messagebus, UID=999, GID=991, home=/run/dbus, shell=/dev/null, from=none <13>Sep 12 04:00:15 rpmi: dbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487401 installed <13>Sep 12 04:00:15 rpmi: icon-theme-hicolor-0.18-alt1 sisyphus+349610.100.1.1 1716831669 installed <13>Sep 12 04:00:15 rpmi: libgtk+2-locales-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Sep 12 04:00:15 rpmi: libnuma-2.0.14-alt2 sisyphus+278485.100.1.1 1626104244 installed <13>Sep 12 04:00:15 rpmi: libx265-199-3.5-alt1.1 sisyphus+277560.100.1.1 1625697230 installed <13>Sep 12 04:00:15 rpmi: libdeflate-1.21-alt1 sisyphus+354654.100.1.1 1723064482 installed <13>Sep 12 04:00:15 rpmi: libtiff5-4.4.0-alt4 sisyphus+322581.100.1.2 1686180089 installed <13>Sep 12 04:00:16 rpmi: libgs-10.01.1-alt2 sisyphus+346236.200.2.1 1716410939 installed <13>Sep 12 04:00:16 rpmi: libgdk-pixbuf-locales-2.42.12-alt1 sisyphus+348142.100.1.1 1715791856 installed <13>Sep 12 04:00:16 rpmi: libde265-1.0.15-alt1 sisyphus+337190.100.1.1 1703502096 installed <13>Sep 12 04:00:16 rpmi: libaom3-3.9.1-alt2 sisyphus+354446.100.1.1 1722877371 installed <13>Sep 12 04:00:16 rpmi: libdatrie-0.2.13-alt1_7 sisyphus+328221.100.1.1 1693336966 installed <13>Sep 12 04:00:16 rpmi: libthai-0.1.29-alt1_6 sisyphus+328230.100.1.2 1693348044 installed <13>Sep 12 04:00:16 rpmi: desktop-file-utils-0.26-alt6 sisyphus+331944.100.1.3 1697550026 installed <13>Sep 12 04:00:16 rpmi: shared-mime-info-2.4-alt1 sisyphus+334259.100.1.1 1699787316 installed <13>Sep 12 04:00:16 rpmi: gsettings-desktop-schemas-data-46.1-alt1 sisyphus+352917.100.1.1 1721056486 installed <13>Sep 12 04:00:16 rpmi: libgio-2.80.5-alt1 sisyphus+356115.100.1.1 1724689299 installed <13>Sep 12 04:00:16 rpmi: gsettings-desktop-schemas-46.1-alt1 sisyphus+352917.100.1.1 1721056486 installed <13>Sep 12 04:00:16 rpmi: glib2-devel-2.80.5-alt1 sisyphus+356115.100.1.1 1724689299 installed <13>Sep 12 04:00:16 rpmi: libgdk-pixbuf-2.42.12-alt1 sisyphus+348142.100.1.1 1715791856 installed <13>Sep 12 04:00:16 rpmi: libgio-devel-2.80.5-alt1 sisyphus+356115.100.1.1 1724689299 installed <13>Sep 12 04:00:16 rpmi: libgdk-pixbuf-devel-2.42.12-alt1 sisyphus+348142.100.1.1 1715791856 installed <13>Sep 12 04:00:16 rpmi: libatk-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Sep 12 04:00:16 rpmi: libheif-1.18.2-alt1 sisyphus+357135.100.1.1 1725864573 installed <13>Sep 12 04:00:16 rpmi: gtk4-update-icon-cache-4.14.5-alt1 sisyphus+355301.100.1.1 1723846472 installed <13>Sep 12 04:00:16 rpmi: libgdk-pixbuf-gir-2.42.12-alt1 sisyphus+348142.100.1.1 1715791856 installed <13>Sep 12 04:00:16 rpmi: libgdk-pixbuf-gir-devel-2.42.12-alt1 sisyphus+348142.100.1.1 1715791856 installed <13>Sep 12 04:00:16 rpmi: libatk-gir-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Sep 12 04:00:16 rpmi: libgirepository1.0-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984694 installed <13>Sep 12 04:00:16 rpmi: gobject-introspection-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984694 installed <13>Sep 12 04:00:16 rpmi: libdconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417205 installed <13>Sep 12 04:00:16 rpmi: dconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417205 installed <13>Sep 12 04:00:16 rpmi: libgtk+3-schemas-3.24.43-alt1 sisyphus+352627.100.1.1 1720700731 installed <13>Sep 12 04:00:16 rpmi: libjson-glib-1.8.0-alt1 sisyphus+325066.600.6.2 1695204014 installed <13>Sep 12 04:00:16 rpmi: libgusb-0.4.9-alt1 sisyphus+345693.100.1.1 1713857461 installed <13>Sep 12 04:00:16 rpmi: libcolord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039016 installed <13>Sep 12 04:00:16 rpmi: libpolkit-124-alt3 sisyphus+351454.100.1.1 1719236630 installed <86>Sep 12 04:00:16 groupadd[2278126]: group added to /etc/group: name=colord, GID=990 <86>Sep 12 04:00:16 groupadd[2278126]: group added to /etc/gshadow: name=colord <86>Sep 12 04:00:16 groupadd[2278126]: new group: name=colord, GID=990 <86>Sep 12 04:00:16 useradd[2278163]: new user: name=colord, UID=998, GID=990, home=/var/colord, shell=/dev/null, from=none <13>Sep 12 04:00:16 rpmi: colord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039016 installed <13>Sep 12 04:00:16 rpmi: libpixman-3:0.43.4-alt2 sisyphus+344164.100.1.1 1711987977 installed <13>Sep 12 04:00:16 rpmi: libX11-locales-3:1.8.10-alt1 sisyphus+353866.100.1.1 1722240771 installed <13>Sep 12 04:00:16 rpmi: libXdmcp-1.1.5-alt1 sisyphus+343583.700.1.1 1711441061 installed <13>Sep 12 04:00:16 rpmi: libxcb-1.17.0-alt1 sisyphus+345308.200.1.1 1713342004 installed <13>Sep 12 04:00:16 rpmi: libX11-3:1.8.10-alt1 sisyphus+353866.100.1.1 1722240771 installed <13>Sep 12 04:00:16 rpmi: libXext-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441101 installed <13>Sep 12 04:00:16 rpmi: libXrender-0.9.11-alt1 sisyphus+308841.100.1.1 1666436130 installed <13>Sep 12 04:00:17 rpmi: libcairo-1:1.18.2-alt1 sisyphus+357195.100.1.1 1725948391 installed <13>Sep 12 04:00:17 rpmi: libcairo-gobject-1:1.18.2-alt1 sisyphus+357195.100.1.1 1725948391 installed <13>Sep 12 04:00:17 rpmi: libXt-1.3.0-alt1 sisyphus+331490.500.1.1 1697023310 installed <13>Sep 12 04:00:17 rpmi: libXfixes-6.0.1-alt1 sisyphus+331490.300.1.1 1697023233 installed <13>Sep 12 04:00:17 rpmi: libXft-2.3.8-alt1 sisyphus+331490.400.1.1 1697023269 installed <13>Sep 12 04:00:17 rpmi: libpango-1.54.0-alt1 sisyphus+350796.200.1.1 1718041393 installed <13>Sep 12 04:00:17 rpmi: libXi-1.8-alt1 sisyphus+285490.200.1.1 1632124174 installed <13>Sep 12 04:00:17 rpmi: libXinerama-1.1.5-alt1 sisyphus+309287.100.1.1 1667213208 installed <13>Sep 12 04:00:17 rpmi: libat-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Sep 12 04:00:17 rpmi: librsvg-1:2.58.91-alt1 sisyphus+345985.100.1.1 1714236684 installed <13>Sep 12 04:00:17 rpmi: libpango-gir-1.54.0-alt1 sisyphus+350796.200.1.1 1718041393 installed <13>Sep 12 04:00:17 rpmi: libtk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548530 installed <13>Sep 12 04:00:17 rpmi: tk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548530 installed <13>Sep 12 04:00:17 rpmi: libXcursor-1.2.2-alt1 sisyphus+343583.600.1.1 1711441025 installed <13>Sep 12 04:00:17 rpmi: libXpm-3.5.17-alt1 sisyphus+330921.100.1.1 1696400257 installed <13>Sep 12 04:00:17 rpmi: libXmu-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441172 installed <13>Sep 12 04:00:17 rpmi: libXrandr-1.5.4-alt1 sisyphus+330992.100.1.1 1696485400 installed <13>Sep 12 04:00:17 rpmi: libXcomposite-0.4.6-alt1 sisyphus+311188.200.1.1 1670233682 installed <13>Sep 12 04:00:17 rpmi: libXdamage-1.1.6-alt1 sisyphus+311188.300.1.1 1670233711 installed <13>Sep 12 04:00:17 rpmi: libgtk+2-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Sep 12 04:00:18 rpmi: libxcb-devel-1.17.0-alt1 sisyphus+345308.200.1.1 1713342004 installed <13>Sep 12 04:00:18 rpmi: libX11-devel-3:1.8.10-alt1 sisyphus+353866.100.1.1 1722240771 installed <13>Sep 12 04:00:18 rpmi: libXrender-devel-0.9.11-alt1 sisyphus+308841.100.1.1 1666436130 installed <13>Sep 12 04:00:18 rpmi: libXt-devel-1.3.0-alt1 sisyphus+331490.500.1.1 1697023310 installed <13>Sep 12 04:00:18 rpmi: libXmu-devel-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441172 installed <13>Sep 12 04:00:18 rpmi: libXext-devel-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441101 installed <13>Sep 12 04:00:18 rpmi: libXaw-1.0.16-alt1 sisyphus+343583.400.1.1 1711440833 installed <13>Sep 12 04:00:18 rpmi: libgd3-2.3.3-alt2 sisyphus+346221.200.2.1 1716402080 installed <13>Sep 12 04:00:19 rpmi: tcl-tix-8.4.3-alt4 sisyphus+277292.300.2.1 1625442550 installed <13>Sep 12 04:00:19 rpmi: at-spi2-atk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Sep 12 04:00:19 rpmi: liblasi-1.1.3-alt3 sisyphus+286812.100.2.1 1633968131 installed <13>Sep 12 04:00:19 rpmi: libgraphviz-11.0.0-alt2 sisyphus+347657.100.1.1 1715096083 installed <13>Sep 12 04:00:19 rpmi: libharfbuzz-cairo-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Sep 12 04:00:19 rpmi: fontconfig-devel-2.15.0-alt1 sisyphus+355771.100.2.3 1724337298 installed <13>Sep 12 04:00:19 rpmi: libfreetype-devel-2.13.3-alt1 sisyphus+355656.100.1.1 1724221064 installed <13>Sep 12 04:00:19 rpmi: libcairo-devel-1:1.18.2-alt1 sisyphus+357195.100.1.1 1725948391 installed <13>Sep 12 04:00:19 rpmi: libharfbuzz-devel-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Sep 12 04:00:19 rpmi: libharfbuzz-gir-devel-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Sep 12 04:00:19 rpmi: libpango-gir-devel-1.54.0-alt1 sisyphus+350796.200.1.1 1718041393 installed <13>Sep 12 04:00:19 rpmi: libcairo-gobject-devel-1:1.18.2-alt1 sisyphus+357195.100.1.1 1725948391 installed <13>Sep 12 04:00:19 rpmi: libXft-devel-2.3.8-alt1 sisyphus+331490.400.1.1 1697023269 installed <13>Sep 12 04:00:19 rpmi: libpango-devel-1.54.0-alt1 sisyphus+350796.200.1.1 1718041393 installed <13>Sep 12 04:00:19 rpmi: libXtst-1.2.4-alt1 sisyphus+308663.1300.1.1 1666168495 installed <13>Sep 12 04:00:19 rpmi: libXxf86vm-1.1.5-alt1 sisyphus+308663.1400.1.1 1666168523 installed <13>Sep 12 04:00:19 rpmi: libGLX-mesa-4:24.1.7-alt1 sisyphus+357133.100.1.1 1725862762 installed <13>Sep 12 04:00:19 rpmi: libGLX-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424893 installed <13>Sep 12 04:00:19 rpmi: libGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424893 installed <13>Sep 12 04:00:19 rpmi: libGLU-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174382 installed <13>Sep 12 04:00:19 rpmi: dbus-tools-gui-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487401 installed <13>Sep 12 04:00:19 rpmi: xprop-1.2.5-alt1 sisyphus+279025.100.1.1 1626354198 installed <13>Sep 12 04:00:19 rpmi: at-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Sep 12 04:00:19 rpmi: libgtk+3-3.24.43-alt1 sisyphus+352627.100.1.1 1720700731 installed <13>Sep 12 04:00:19 rpmi: libgtk+3-devel-3.24.43-alt1 sisyphus+352627.100.1.1 1720700731 installed <13>Sep 12 04:00:19 rpmi: libgtk+3-gir-3.24.43-alt1 sisyphus+352627.100.1.1 1720700731 installed <13>Sep 12 04:00:19 rpmi: libgbm-4:24.1.7-alt1 sisyphus+357133.100.1.1 1725862762 installed <13>Sep 12 04:00:19 rpmi: libEGL-mesa-4:24.1.7-alt1 sisyphus+357133.100.1.1 1725862762 installed <13>Sep 12 04:00:19 rpmi: libEGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424893 installed <13>Sep 12 04:00:19 rpmi: libglvnd-devel-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424893 installed <13>Sep 12 04:00:19 rpmi: libopenexrcore30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379858 installed <13>Sep 12 04:00:19 rpmi: libiex30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379858 installed <13>Sep 12 04:00:19 rpmi: libilmthread30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379858 installed <13>Sep 12 04:00:19 rpmi: libimath29-3.1.6-alt4 sisyphus+347973.100.1.1 1715620450 installed <13>Sep 12 04:00:20 rpmi: libopenexr30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379858 installed <13>Sep 12 04:00:20 rpmi: libjxl-pixbuf-loader-0.10.3-alt1 sisyphus+351709.100.1.1 1719512970 installed <13>Sep 12 04:00:20 rpmi: libjxl0.10-0.10.3-alt1 sisyphus+351709.100.1.1 1719512970 installed <13>Sep 12 04:00:20 rpmi: libImageMagick7.10-7.1.1.36-alt1 sisyphus+354667.100.1.1 1723102732 installed <13>Sep 12 04:00:20 rpmi: ImageMagick-tools-7.1.1.36-alt1 sisyphus+354667.100.1.1 1723102732 installed <13>Sep 12 04:00:20 rpmi: libGL-devel-4:24.1.7-alt1 sisyphus+357133.100.1.1 1725862762 installed <13>Sep 12 04:00:20 rpmi: libGLU-devel-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174382 installed <13>Sep 12 04:00:20 rpmi: libepoxy-devel-1.5.10-alt1 sisyphus+296853.200.2.1 1647631866 installed <13>Sep 12 04:00:20 rpmi: libgtk+3-gir-devel-3.24.43-alt1 sisyphus+352627.100.1.1 1720700731 installed <13>Sep 12 04:00:20 rpmi: libgtk+2-devel-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Sep 12 04:00:20 rpmi: python3-modules-tkinter-3.12.6-alt1 sisyphus+357228.100.1.1 1725970095 installed <13>Sep 12 04:00:20 rpmi: libXaw-devel-1.0.16-alt1 sisyphus+343583.400.1.1 1711440833 installed <13>Sep 12 04:00:20 rpmi: libXinerama-devel-1.1.5-alt1 sisyphus+309287.100.1.1 1667213208 installed <13>Sep 12 04:00:20 rpmi: tk-devel-8.6.13-alt1 sisyphus+310696.200.1.1 1669548530 installed <13>Sep 12 04:00:20 rpmi: bwidget-1.9.1-alt1 1314273552 installed <13>Sep 12 04:00:20 rpmi: python3-module-pygobject3-3.48.2-alt1.1 sisyphus+351943.100.1.1 1719858052 installed <13>Sep 12 04:00:20 rpmi: tcl-img-1.4.14-alt1 sisyphus+316986.300.2.1 1679243171 installed <13>Sep 12 04:00:20 rpmi: libtirpc-devel-1.3.5-alt2 sisyphus+353584.100.1.1 1721897162 installed <13>Sep 12 04:00:20 rpmi: asciidoc-a2x-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>Sep 12 04:00:20 rpmi: boost-lockfree-devel-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:20 rpmi: boost-python3-devel-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Sep 12 04:00:20 rpmi: intltool-0.51.0-alt2 1513698802 installed <13>Sep 12 04:00:20 rpmi: man-db-2.12.0-alt1 sisyphus+336930.2100.1.1 1703107121 installed <13>Sep 12 04:00:20 rpmi: libmodbus-devel-3.1.10-alt1 sisyphus+326185.100.1.1 1690851977 installed <13>Sep 12 04:00:20 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687267966 installed <13>Sep 12 04:00:20 rpmi: libusb-devel-1.0.27-alt1 sisyphus+347412.100.1.1 1714739651 installed <13>Sep 12 04:00:20 rpmi: tclx-1:8.4.4-alt1 sisyphus+251935.100.1.1 1589842633 installed <13>Sep 12 04:00:20 rpmi: xorg-cf-files-1.0.7-alt3 sisyphus+299066.100.1.1 1650986799 installed <13>Sep 12 04:00:20 rpmi: python3-module-yapps2-2.2.0-alt2 sisyphus+281199.100.1.1 1627462968 installed <13>Sep 12 04:00:20 rpmi: libudev-devel-1:255.11-alt1 sisyphus+356663.100.1.1 1725296616 installed <13>Sep 12 04:00:20 rpmi: libreadline-devel-8.2.10-alt1 sisyphus+338911.100.4.1 1706717067 installed <13>Sep 12 04:00:20 rpmi: dos2unix-7.5.2-alt1 sisyphus+339342.100.1.1 1706585522 installed Building target platforms: x86_64 Building for target x86_64 Wrote: /usr/src/in/nosrpm/linuxcnc-2.9.3-alt3.20240830.nosrc.rpm (w1.gzdio) Installing linuxcnc-2.9.3-alt3.20240830.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.10517 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf linuxcnc-2.9.3 + echo 'Source #0 (linuxcnc-2.9.3.tar):' Source #0 (linuxcnc-2.9.3.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/linuxcnc-2.9.3.tar + cd linuxcnc-2.9.3 + /bin/chmod -c -Rf u+rwX,go-w . + echo 'Patch #0 (linuxcnc-2.9.3-alt3.20240830.patch):' Patch #0 (linuxcnc-2.9.3-alt3.20240830.patch): + /usr/bin/patch -p1 patching file lib/python/qtvcp/lib/virtual_keyboard.py patching file lib/python/qtvcp/widgets/origin_offsetview.py patching file lib/python/qtvcp/widgets/versa_probe.py patching file linuxcnc-documentation.desktop patching file scripts/linuxcnc_info.in patching file share/qtvcp/panels/test_panel/test_panel_handler.py patching file src/Makefile patching file src/Makefile.inc.in patching file src/configure.ac patching file src/m4/ax_boost_base.m4 patching file src/m4/ax_python.m4 + sed -i 's|lib/tcltk/linuxcnc|lib64/tcl/linuxcnc|' lib/python/rs274/options.py + sed -i 's|INCLUDES := .|INCLUDES := . /usr/include/tirpc|' src/Makefile + sed -i 's|LDFLAGS := |LDFLAGS := -ltirpc |' src/Makefile + sed 's/ -o root//g' -i src/Makefile + find . -name '*.py' -exec dos2unix '{}' ';' dos2unix: converting file ./tests/trajectory-planner/circular-arcs/test-reverse.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/run_all_tests.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/machine_setup.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/linuxcnc_control.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/m61/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-with-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-no-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/tlo/test-ui.py to Unix format... dos2unix: converting file ./tests/statbuffer-g5x-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/startup-state/test-ui.py to Unix format... dos2unix: converting file ./tests/single-step/test-ui.py to Unix format... dos2unix: converting file ./tests/rs274ngc-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/subs.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/remap.py to Unix format... dos2unix: converting file ./tests/remap/spindle/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/spindle/remap.py to Unix format... dos2unix: converting file ./tests/remap/sequencing/permute.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/remap.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/remap.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/subs.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/namedparams.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/subs.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/oword.py to Unix format... dos2unix: converting file ./tests/remap/introspect/subs.py to Unix format... dos2unix: converting file ./tests/remap/introspect/oword.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/remap.py to Unix format... dos2unix: converting file ./tests/mqtt/display.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-joint/test-ui.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-axis/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/startup-gcode-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/mountaindew/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/basic/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/toplevel.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/remap.py to Unix format... dos2unix: converting file ./tests/mdi-queue-length/test-ui.py to Unix format... dos2unix: converting file ./tests/lathe/test-ui.py to Unix format... dos2unix: converting file ./tests/io-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/subs.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/oword.py to Unix format... dos2unix: converting file ./tests/interp/subroutine-return/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/python/error/canon.py to Unix format... dos2unix: converting file ./tests/interp/python-self/subs.py to Unix format... dos2unix: converting file ./tests/interp/python-self/oword.py to Unix format... dos2unix: converting file ./tests/interp/pymove/subs.py to Unix format... dos2unix: converting file ./tests/interp/pymove/oword.py to Unix format... dos2unix: converting file ./tests/interp/oword-mdi-sub-update/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/mdi-oword-m66/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/m98m99/12-M99-endless-main-program/test-ui.py to Unix format... dos2unix: converting file ./tests/hm2-idrom/check-dmesg.py to Unix format... dos2unix: converting file ./tests/hard-limits/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/mdi/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/jogging/test-ui.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_writer.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_test.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_reader.py to Unix format... dos2unix: converting file ./tests/halmodule.0/test.py to Unix format... dos2unix: converting file ./tests/hal-stream/test.py to Unix format... dos2unix: converting file ./tests/hal-link-unlink/hallink.py to Unix format... dos2unix: converting file ./tests/ccomp/early-exit/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/stop-button-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/on_abort_command-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/g64/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/feed-rate/test-ui.py to Unix format... dos2unix: converting file ./src/po/fixpaths.py to Unix format... dos2unix: converting file ./src/modsilent.py to Unix format... dos2unix: converting file ./src/hal/utils/elbpcom.py to Unix format... dos2unix: converting file ./src/hal/user_comps/z_level_compensation.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzbc-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzac-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzab-tdr-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/scaragui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/rotarydelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/pumagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/puma560gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/millturngui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/melfagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/max5gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/maho600gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/lineardelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hexagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hbmgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/5axisgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/sim-torch.py to Unix format... dos2unix: converting file ./src/hal/user_comps/scorbot-er-3.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pyvcp.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pmx485.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mqtt-publisher.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mitsub_vfd.py to Unix format... dos2unix: converting file ./src/hal/user_comps/hal_input.py to Unix format... dos2unix: converting file ./src/hal/user_comps/gladevcp.py to Unix format... dos2unix: converting file ./src/hal/drivers/rbf2h.py to Unix format... dos2unix: converting file ./src/hal/drivers/mesa-hostmot2/modbus/modcompile.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/touchy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/listing.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/hal_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/filechooser.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/stepconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/import_mach.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtvcp/qtvcp.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac_gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-plasmac2qt.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-materials.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-cfg2prefs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/pmx485-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/pyui.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_validate.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_handler.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/master.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/commands.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/tests.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/private_data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pncconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/mdro/mdro.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/keybindings.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/gscreen.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/qt5_graphics.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/gremlin.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/player.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/notification.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/icon_theme_helper.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/gmoccapy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/getiniinfo.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/dialogs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/tracking-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/teach-in.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/linuxcnctop.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/lintini.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/image-to-gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/haltest.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/debuglevel.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis-remote.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/makeicon.py to Unix format... dos2unix: converting file ./src/emc/ini/update_ini.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/x1mill/x1mill_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/woodpecker/woodpecker_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qttouchy/qttouchy_handler.py to Unix format... dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py. dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py. dos2unix: converting file ./share/qtvcp/screens/qtplasmac/qtplasmac_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtplasmac/languages/qtplasmac.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtlathe/qtlathe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon/qtdragon_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtaxis/qtaxis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc/qt_cnc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/blender/blender_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_scara/vismach_scara_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/versaprobe/versaprobe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/tool_dialog/tool_dialog_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_probe/test_probe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_panel/test_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_led/test_led_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_dial/test_dial_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_button/test_button_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/spindle_belts/spindle_belts_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/sim_panel/sim_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/copy/copy_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/cam_align/cam_align_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/spartan/spartan_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/silverdragon/silverdragon_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/industrial/industrial_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis/gaxis_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/9_axis/9_axis_handler.py to Unix format... dos2unix: converting file ./scripts/torture.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/stdglue.py to Unix format... dos2unix: Skipping symbolic link ./nc_files/remap_lib/python-stdglue/python/stdglue.py. dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/toplevel.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/remap.py to Unix format... dos2unix: converting file ./nc_files/involute.py to Unix format... dos2unix: converting file ./nc_files/holecircle.py to Unix format... dos2unix: converting file ./nc_files/flowsnake.py to Unix format... dos2unix: converting file ./nc_files/filtertest.py to Unix format... dos2unix: converting file ./nc_files/filtertest-gui.py to Unix format... dos2unix: converting file ./lib/python/vismach.py to Unix format... dos2unix: converting file ./lib/python/vcpparse.py to Unix format... dos2unix: converting file ./lib/python/tooldb.py to Unix format... dos2unix: converting file ./lib/python/rs274/options.py to Unix format... dos2unix: converting file ./lib/python/rs274/interpret.py to Unix format... dos2unix: converting file ./lib/python/rs274/glcanon.py to Unix format... dos2unix: converting file ./lib/python/rs274/author.py to Unix format... dos2unix: converting file ./lib/python/rs274/__init__.py to Unix format... dos2unix: converting file ./lib/python/rs274/OpenGLTk.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/versa_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/origin_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_baseclass.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/web_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/virtualkeyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/touchEntry.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tool_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tab_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/system_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/stylesheeteditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_stacked.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_slider.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_led.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/simple_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/screen_options.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/runFromLine_dialog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_progress.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_gauge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/richtext_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/radio_axis_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/qtvcp_icons.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_subprog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_routines.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/overlay_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/offset_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/nurbs_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_touchy.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_history.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/led_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/joypad.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/jog_increments.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/image_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_selectionbox.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_output.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_input.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/geditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_graphics.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/file_manager.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/fake_status.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/entry_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialog_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialogMixin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/detach_tabs.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/container_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/camview_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/calculator.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/basic_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/axis_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/adjustment_bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button_round.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qtvcp_handler.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_tstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_pstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makepins.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makegui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_istat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_action.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/widgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/web_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/virtualkeyboard_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/versa_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/toolbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/tab_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_slider_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/simplewidgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/screenoptions_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_progress_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_gauge_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/qtvcp_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/overlay_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/nurbs_editor_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/joypad_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/jogincrements_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/hal_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/graphics_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/dialog_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/detach_tabs_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/container_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/camview_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/basic_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/actionbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/logger.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/virtual_keyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/writer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/wordcount.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/table.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/find.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/datetime.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/touchoff_subprogram.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/toolbar_actions.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/sys_notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/ripper/gcode_ripper.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/updater.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/tooltips.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/set_offsets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conversational.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_triangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_star.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_slot.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_settings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_sector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_polygon.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_gusset.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_bolt.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_block.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/scara.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/qt_vismach.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/primitives.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/millturn.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/mill_xyz.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_pdf/PDFViewer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/preferences.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/message.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/mdi_text.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/keybindings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcodes.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/facing.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/colored_formatter.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/aux_program_loader.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/auto_height/auto_height.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/audio_player.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/core.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/pyvcp_widgets.py to Unix format... dos2unix: converting file ./lib/python/pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/pyhal.py to Unix format... dos2unix: converting file ./lib/python/propertywindow.py to Unix format... dos2unix: converting file ./lib/python/popupkeyboard.py to Unix format... dos2unix: converting file ./lib/python/plasmac/triangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/star.py to Unix format... dos2unix: converting file ./lib/python/plasmac/slot.py to Unix format... dos2unix: converting file ./lib/python/plasmac/sector.py to Unix format... dos2unix: converting file ./lib/python/plasmac/run_from_line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/rectangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/polygon.py to Unix format... dos2unix: converting file ./lib/python/plasmac/line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/gusset.py to Unix format... dos2unix: converting file ./lib/python/plasmac/ellipse.py to Unix format... dos2unix: converting file ./lib/python/plasmac/circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/bolt_circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/block.py to Unix format... dos2unix: converting file ./lib/python/multifilebuilder.py to Unix format... dos2unix: converting file ./lib/python/linuxcnc_util.py to Unix format... dos2unix: converting file ./lib/python/linux_event.py to Unix format... dos2unix: converting file ./lib/python/hershey.py to Unix format... dos2unix: converting file ./lib/python/hal_glib.py to Unix format... dos2unix: converting file ./lib/python/hal.py to Unix format... dos2unix: converting file ./lib/python/gremlin_view.py to Unix format... dos2unix: converting file ./lib/python/glnav.py to Unix format... dos2unix: converting file ./lib/python/gladevcp_makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/xembed.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/tooledit_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/status_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/state_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/speedcontrol.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/persistence.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/overridewidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetpage_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/led.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/jogwheel.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/iconview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_widgets.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_sourceview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pythonplugin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_meter.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_mdihistory.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_lightbutton.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin_plus.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_graph.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_filechooser.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_dial.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_bar.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_actions.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gtk_action.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gladebuilder.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/drowidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/core.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/combi_dro.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/calculatorwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/bwidget.py to Unix format... dos2unix: converting file ./lib/python/bitfile.py to Unix format... dos2unix: converting file ./docs/src/mkpre.py to Unix format... dos2unix: converting file ./docs/src/links_db_gen.py to Unix format... dos2unix: converting file ./docs/src/links.py to Unix format... dos2unix: converting file ./docs/src/gui/panelui_handler.py to Unix format... dos2unix: converting file ./docs/src/gen_complist.py to Unix format... dos2unix: converting file ./docs/src/checklinks.py to Unix format... dos2unix: converting file ./debian/tests/linuxcnc-test-ui.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/zlevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/woodpecker_/woodpecker_handler.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/numstr.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/compensate.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/touchy/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/qtplasmac/custom_filter.py to Unix format... dos2unix: converting file ./configs/sim/hitcounter.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/signals.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/plasma.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/lathe_configs/lathehandler.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/gmoccapy_800x600.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/blockdelete.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/util.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/panelui-demo/panelui_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/plugins.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/embedding.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/fullscreen.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/axis_resize.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/remap.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/axis/gladevcp/test_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/probe.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/meter_scale.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_ran.py. dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_nonran.py. dos2unix: converting file ./configs/sim/axis/db_demo/db.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/functionhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler_persistent.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/simple-callback/simplecallback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/complex/complex.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/colored-label/coloredlabel.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/class-callback/class_callback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/spinbutton.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/sourceview.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/radio.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox_manual_list.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/animated-backdrop/cairodraw.py to Unix format... + sed -i 's/GROUP="plugdev"/GROUP="uucp"/g' debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.56696 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd linuxcnc-2.9.3 + pushd src ~/RPM/BUILD/linuxcnc-2.9.3/src ~/RPM/BUILD/linuxcnc-2.9.3 + ./autogen.sh + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto' + export CFLAGS + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto' + export CXXFLAGS + FFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto' + export FFLAGS + FCFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto' + export FCFLAGS + '[' -n '' ']' ++ printf %s '-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto' ++ sed -r 's/(^|[[:space:]]+)-[^m][^[:space:]]*//g' + ASFLAGS= + export ASFLAGS + export lt_cv_deplibs_check_method=pass_all + lt_cv_deplibs_check_method=pass_all + readlink -e -- ./configure + xargs -ri dirname -- '{}' + xargs -ri find '{}' -type f '(' -name config.sub -or -name config.guess ')' -printf '%h/\n' + sort -u + xargs -rn1 install -pm755 -- /usr/share/gnu-config/config.sub /usr/share/gnu-config/config.guess + configure_runstatedir_flags= + grep -qF runstatedir=DIR ./configure + configure_runstatedir_flags=--runstatedir=/var/run + ./configure --build=x86_64-alt-linux --host=x86_64-alt-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/lib --localstatedir=/var/lib --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --disable-silent-rules --runstatedir=/var/run --without-included-gettext --enable-non-distributable=yes --with-realtime=uspace configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext checking for x86_64-alt-linux-c++... no checking for x86_64-alt-linux-clang++... no checking for c++... c++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether c++ supports C++17 features with -std=gnu++17... yes checking build toplevel... /usr/src/RPM/BUILD/linuxcnc-2.9.3 checking installation prefix... /usr checking for grep... /usr/bin/grep checking for egrep... /usr/bin/egrep checking for x86_64-alt-linux-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for x86_64-alt-linux-gcc... x86_64-alt-linux-gcc checking whether the compiler supports GNU C... yes checking whether x86_64-alt-linux-gcc accepts -g... yes checking for x86_64-alt-linux-gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for rpc/rpc.h... no checking for get_myaddress in -ltirpc... yes checking for rpc/rpc.h... yes checking for rtai-config... none checking for xeno-config... none checking for realtime API(s) to use... uspace checking whether to enable userspace PCI access... yes checking for libudev... yes - version 255 checking for cc version... not specified checking for x86_64-alt-linux-gcc... (cached) x86_64-alt-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether x86_64-alt-linux-gcc accepts -g... (cached) yes checking for x86_64-alt-linux-gcc option to enable C11 features... (cached) none needed checking how to run the C preprocessor... x86_64-alt-linux-gcc -E checking for usability of linux/hidraw.h... yes checking for usability of rpc/rpc.h... yes checking for libmodbus3... yes - version 3.1.10 checking for libusb-1.0... yes checking for libgpiod < 2.0.0... no configure: WARNING: Could not find libgpiod, not building hal_gpio checking for module installation directory... /usr/lib/linuxcnc/modules checking for glib... yes - 2.80.5 checking for GTK 3.22.4 or above... yes - 3.24.43 checking for GTK 2.4.0 or above... yes - 2.24.33 checking for libgnomeprintui-2.2... no -- printing from classicladder will not be possible checking whether make sets $(MAKE)... yes checking for x86_64-alt-linux-ranlib... no checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for install... /usr/bin/ginstall -c checking for sed... /usr/bin/sed checking for ps... /usr/bin/ps checking for kill... /usr/bin/kill checking for whoami... /usr/bin/whoami checking for awk... /usr/bin/awk checking for pidof... /usr/bin/pidof checking for ipcs... /usr/bin/ipcs checking for fuser... /usr/bin/fuser checking for yapps... no checking for yapps2... /usr/bin/yapps2 checking for mandb... /usr/bin/mandb checking for intltool-extract... /usr/bin/intltool-extract checking for yapps... (cached) /usr/bin/yapps2 checking build system type... x86_64-alt-linux-gnu checking host system type... x86_64-alt-linux-gnu checking for boostlib >= (102000)... yes checking for python build information... checking for python3.12... python3.12 checking for main in -lpython3.12... yes results of the Python check: Binary: python3.12 Library: python3.12 Include Dir: /usr/include/python3.12 checking for python3.12... /usr/bin/python3.12 checking for python... (cached) /usr/bin/python3.12 checking for a version of Python >= '2.1.0'... yes checking for the sysconfig Python package... yes checking for Python include path... -I/usr/include/python3.12 checking for Python library path... -L/usr/lib64 -lpython3.12 checking for Python site-packages path... /usr/lib/python3/site-packages checking for Python platform specific site-packages path... checking python extra libraries... -ldl -lm checking python extra linking flags... -Xlinker -export-dynamic checking consistency of all components of python development environment... yes checking whether the Boost::Python library is available... yes checking whether boost_python is the correct library... no checking whether boost_python312-mt is the correct library... yes checking whether to build documentation... no checking for sys/io.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for semtimedop... yes checking for optreset... no checking for library containing dlopen... none required checking for library containing clock_nanosleep... none required checking for tcl... find: '/usr/lib/chkpwd': Permission denied /usr/lib64/tclConfig.sh found checking for tk... /usr/lib64/tkConfig.sh found checking whether to check for runtime dependencies... yes checking for BWidget using /usr/bin/tclsh8.6... found checking for BLT using /usr/bin/tclsh8.6... not found checking for tclX using /usr/bin/tclsh8.6... found checking for python pango module... found checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X11/extensions/Xinerama.h... yes checking for XineramaQueryExtension in -lXinerama... yes checking for readline/readline.h... yes checking for readline/history.h... yes Trying readline without -ltermcap checking for readline in -lreadline... yes Trying readline with -ltermcap checking for readline in -lreadline... no Readline does not require -ltermcap checking whether readline license is compatible with GPL-2... no configure: WARNING: The LinuxCNC binary you are building may not be distributable due to a license incompatibility with LinuxCNC (some portions GPL-2 only) and Readline version 6 and greater (GPL-3 or later). configure: WARNING: User requested to enable non-distributable builds. Continuing. checking for locale.h... yes checking for setlocale... yes checking for libintl.h... yes checking for gettext in -lintl... no checking for xgettext... /usr/bin/xgettext checking for msgfmt... /usr/bin/msgfmt checking python version... OK checking match between tk and Tkinter versions... 8.6 checking for site-package location... /usr/lib64/python3/site-packages checking for working GLU quadrics... yes checking for Xmu headers... checking for X11/Xmu/Xmu.h... yes configure: creating ./config.status config.status: creating ../scripts/rtapi.conf config.status: creating ../scripts/linuxcnc config.status: creating ../scripts/linuxcnc_info config.status: creating ../scripts/halrun config.status: creating ../scripts/rip-environment config.status: creating ../scripts/haltcl config.status: creating ../scripts/halcmd_twopass config.status: creating ../scripts/realtime config.status: creating ../scripts/runtests config.status: creating ../scripts/linuxcnc_var config.status: creating ../scripts/linuxcnc-checklink config.status: creating Makefile.inc config.status: creating Makefile.modinc config.status: creating ../tcl/linuxcnc.tcl config.status: creating ../lib/python/nf.py config.status: creating ../scripts/linuxcncmkdesktop config.status: creating ../share/applications/linuxcnc-latency.desktop config.status: creating ../share/applications/linuxcnc-latency-histogram.desktop config.status: creating ../share/applications/linuxcnc-pncconf.desktop config.status: creating ../share/applications/linuxcnc-stepconf.desktop config.status: creating ../share/applications/linuxcnc.desktop config.status: creating ../share/desktop-directories/linuxcnc-cnc.directory config.status: creating ../share/desktop-directories/linuxcnc-ref.directory config.status: creating ../share/desktop-directories/linuxcnc-doc.directory config.status: creating ../share/menus/CNC.menu config.status: creating config.h configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext ###################################################################### # LinuxCNC - Enhanced Machine Controller # ###################################################################### # # # LinuxCNC is a software system for computer control of machine # # tools such as milling machines. LinuxCNC is released under the # # GPL. Check out http://www.linuxcnc.org/ for more details. # # # # # # It seems that ./configure completed successfully. # # This means that RT is properly installed # # If things don't work check config.log for errors & warnings # # # # warning: If you already have an installed linuxcnc, this will # # replace an existing installation. If you have installed # # a linuxcnc package, this will damage the package. # # hint: To test a self-built version of linuxcnc without damaging # # the package version, don't specify a --prefix # # # # Next compile by typing # # make # # then install it by typing # # sudo make install # # # # To run the software type # # linuxcnc # # # ###################################################################### + make -j16 make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/115 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating abs.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating abs_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating and2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating axistest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating anglejog.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating biquad.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating bin2gray.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating bitslice.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating bitwise.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating bldc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating blend.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating carousel.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating charge_pump.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating clarke2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating clarke3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating clarkeinv.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating constant.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating comp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' converting conv for conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating corexy_by_hal.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating ddt.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating deadzone.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating dbounce.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating demux.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating differential.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating div2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating edge.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating eoffset_per_angle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating estop_latch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating feedcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating filter_kalman.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating flipflop.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating gantry.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating gearchange.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating gray2bin.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating homecomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating histobins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating ilowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating hypot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating invert.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating integ.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating joyhandle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating knob2float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating latencybins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating limit1.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating limit2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating limit3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating limit_axis.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating lincurve.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating logic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating lowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating lut5.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating maj3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating match8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating max31855.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mesa_pktgyro_test.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating message.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating millturn.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating minmax.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating moveoff.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mult2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating multiclick.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating multiswitch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mux16.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mux4.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mux2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mux8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating near.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating not.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating offset.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating ohmic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating or2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating oneshot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating orient.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating plasmac.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sample_hold.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating scale.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating scaled_s32_sums.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating select8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sim_axis_hardware.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sim_home_switch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sim_matrix_kb.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sim_parport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sim_spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating simple_tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sphereprobe.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating spindle_monitor.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating steptest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating sum2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating thc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating threadtest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating thcud.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating time.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating timedelay.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating timedelta.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating tof.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating toggle2nist.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating toggle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating ton.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating tristate_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating tristate_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating updown.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating userkins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating wcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating xhc_hb04_util.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating xor2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating xyzab_tdr_kins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating serport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mesa_7i65.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating mesa_uart.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_bit_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_bit_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_bit_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_float_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_float_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_s32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_u32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_u32_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_u32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_s32_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating conv_s32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/237 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' sed hal/drivers/mesa_uart.comp -e "1 s/mesa_uart/mesa_uart_test/" > ../tests/halcompile/serial-out-of-tree/mesa_uart_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' sed ../docs/src/hal/rand.comp -e "1 s/rand/rand_test/" > ../tests/halcompile/userspace/rand_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp ../scripts/rtapi.conf ../tests/uspace/spawnv-root/rtapi.conf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying test input hal/components/lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying test input hal/components/logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying test input hal/components/bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/os_intf/_timer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/os_intf/sem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/os_intf/shm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/os_intf/_shm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/rcs/rcs_exit.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/os_intf/_sem.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/phantom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/posemath/posemath.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/memsem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/locmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/rcs/rcs_print.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/os_intf/timer.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/sendn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/recvn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/physmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_pm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_in.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_up.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/shmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_aup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/tcp_opts.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_dup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/cmd_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/nml_oi.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_cfg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_xup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/nmlmsg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/nmldiag.cc libnml/nml/nmldiag.cc: In function 'int nml_print_diag_list()': libnml/nml/nmldiag.cc:134:26: warning: the address of 'CMS::BufferName' will never be NULL [-Waddress] 134 | if (NULL != nml->cms->BufferName) { | ^ In file included from libnml/cms/cmsdiag.hh:18, from libnml/nml/nmldiag.hh:18, from libnml/nml/nmldiag.cc:16: libnml/cms/cms.hh:354:10: note: 'CMS::BufferName' declared here 354 | char BufferName[LINELEN]; | ^~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/stat_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/linklist/linklist.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/nml_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling rtapi/uspace_ulapi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cmsdiag.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/tcp_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling rtapi/uspace_rtapi_string.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/cms/cms_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' :1: SyntaxWarning: invalid escape sequence '\.' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/nml.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/inifile/inivar.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/buffer/tcpmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling rtapi/uspace_rtapi_parport.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/inifile/inifile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in config.status: creating ../docs/man/man1/linuxcnc.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling rtapi/rtapi_pci.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/emccalib.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/emccalib.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/emccalib.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/emccalib.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/emccalib.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/emccalib.1.xml" Note: Writing emccalib.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/emccalib.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/components/streamer_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/components/sampler_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/halstreamer.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/halstreamer.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/halstreamer.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/halstreamer.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/halstreamer.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/halstreamer.1.xml" Note: Writing halstreamer.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/halstreamer.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling libnml/nml/nml_mod.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/mqtt-publisher.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/mqtt-publisher.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/mqtt-publisher.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/mqtt-publisher.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/mqtt-publisher.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/mqtt-publisher.1.xml" Note: Writing mqtt-publisher.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/mqtt-publisher.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/sendkeys.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/sendkeys.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/sendkeys.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/sendkeys.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/sendkeys.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/sendkeys.1.xml" Note: Writing sendkeys.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/sendkeys.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/mb2hal/mb2hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/hy_gt_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/hy_gt_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/hy_gt_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/hy_gt_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/hy_gt_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/hy_gt_vfd.1.xml" Note: Writing hy_gt_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/hy_gt_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/mb2hal/mb2hal_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/components/panelui.c hal/components/panelui.c: In function 'main': hal/components/panelui.c:211:5: warning: 'Py_SetProgramName' is deprecated [-Wdeprecated-declarations] 211 | Py_SetProgramName(wname); | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from hal/components/panelui.c:73: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/svd-ps_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/svd-ps_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/svd-ps_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/svd-ps_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/svd-ps_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/svd-ps_vfd.1.xml" Note: Writing svd-ps_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/svd-ps_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/enum.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/enum.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/enum.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/enum.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/enum.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/enum.9.xml" Note: Writing enum.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/enum.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/mb2hal/mb2hal_init.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/mb2hal/mb2hal_modbus.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/gs2_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man3/hm2_pktuart.3` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man3/hm2_pktuart.3.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man3', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man3/hm2_pktuart.3.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man3/hm2_pktuart.3.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man3/hm2_pktuart.3.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man3 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man3/hm2_pktuart.3.xml" Note: Writing hm2_pktuart.3 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man3/hm2_pktuart.3.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/hy_gt_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/shuttle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/svd-ps_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/sendkeys.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/streamer.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/streamer.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/streamer.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/streamer.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/streamer.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/streamer.9.xml" Note: Writing streamer.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man9/streamer.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/vfs11_vfd/vfs11_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/xhc-whb04b-6.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/xhc-whb04b-6.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/xhc-whb04b-6.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/xhc-whb04b-6.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/xhc-whb04b-6.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/xhc-whb04b-6.1.xml" Note: Writing xhc-whb04b-6.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.3/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.3/docs/man/man1/xhc-whb04b-6.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/config.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/emc_mods.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/files_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/files_project.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/protocol_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/protocol_modbus_slave.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/serial_linux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/classicladder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/socket_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/drawing_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/drawing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/edit_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/classicladder_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/edit_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/config_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/socket_server.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/edit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/editproperties_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/vars_names.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/halsh.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/halcmd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/halcmd_completion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/halcmd_main.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/xhc-hb04.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/manager_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling rtapi/uspace_rtapi_app.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying Modbus template mesa_modbus.c.tmpl make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script elbpcom Copying python script elbpcom make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/halrmt.c hal/utils/halrmt.c:312:1: warning: "/*" within comment [-Wcomment] 312 | /*********************************************************************** | make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script modcompile Copying python script modcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/vfdb_vfd/vfdb_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/symbols_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/classicladder/spy_vars_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/huanyang-vfd/hy_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/huanyang-vfd/hy_comm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/miscgtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/meter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/scope.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/nml_intf/emcglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/halcmd_commands.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/scope_trig.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/scope_horiz.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/scope_files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/scope_vert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/utils/scope_disp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/xhc-whb04b-6/pendant-types.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/nml_intf/emcargs.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/nml_intf/canon_position.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/modal_state.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/nml_intf/emcops.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/nml_intf/emc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/shcom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/xhc-whb04b-6/usb.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/xhc-whb04b-6/main.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/xhc-whb04b-6/xhc-whb04b6.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/emcsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/xhc-whb04b-6/hal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/ini/emcIniFile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/sockets.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/ini/inihal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/nml_intf/interpl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion/emcmotglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/ini/iniaxis.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/ini/inijoint.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/ini/inispindle.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/tooldata/tooldata_mmap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/tooldata/tooldata_common.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/ini/initraj.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/xhc-whb04b-6/pendant.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/tooldata/tooldata_db.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/schedrmt.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/backtrace.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/emcrsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/emcsched.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/emcsvr.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/emclcd.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_base.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/halui.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion/usrmotintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/emccanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/taskintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_arc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_array.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/emctaskmain.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_check.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_execute.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_queue.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_inverse.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_find.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_internal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_write.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_cycles.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/nurbs_additional_functions.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/emctask.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_convert.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_read.cc In file included from emc/rs274ngc/interp_read.cc:28: emc/rs274ngc/interp_read.cc: In member function 'int Interp::read_text(const char*, FILE*, char*, char*, int*)': emc/rs274ngc/rs274ngc_return.hh:80:47: warning: unknown conversion type character ')' in format [-Wformat=] 80 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN _("File ended with no percent sign (%)") | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ emc/rs274ngc/interp_internal.hh:872:19: note: in definition of macro 'ERS' 872 | setError (fmt, ## __VA_ARGS__); \ | ^~~ emc/rs274ngc/rs274ngc_return.hh:80:45: note: in expansion of macro '_' 80 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN _("File ended with no percent sign (%)") | ^ emc/rs274ngc/interp_read.cc:3139:13: note: in expansion of macro 'NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN' 3139 | ERS(NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from emc/rs274ngc/interp_read.cc:27: emc/rs274ngc/rs274ngc_return.hh:80:82: note: format string is defined here 80 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN _("File ended with no percent sign (%)") | ^ emc/rs274ngc/rs274ngc_return.hh:81:62: warning: unknown conversion type character ')' in format [-Wformat=] 81 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN_OR_PROGRAM_END _("File ended with no percent sign (%) or program end (M2)") | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ emc/rs274ngc/interp_internal.hh:872:19: note: in definition of macro 'ERS' 872 | setError (fmt, ## __VA_ARGS__); \ | ^~~ emc/rs274ngc/rs274ngc_return.hh:81:60: note: in expansion of macro '_' 81 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN_OR_PROGRAM_END _("File ended with no percent sign (%) or program end (M2)") | ^ emc/rs274ngc/interp_read.cc:3143:13: note: in expansion of macro 'NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN_OR_PROGRAM_END' 3143 | ERS(NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN_OR_PROGRAM_END); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ emc/rs274ngc/rs274ngc_return.hh:81:97: note: format string is defined here 81 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN_OR_PROGRAM_END _("File ended with no percent sign (%) or program end (M2)") | ^ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/taskclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_g7x.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_inspection.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_o_word.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_python.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_namedparams.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_setup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/kinematics/ugenserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interp_remap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/canterp/canterp.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/iotask/ioControl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/iotask/ioControl_v2.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion-logger/motion-logger.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/cs/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling module_helper/module_helper.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/da/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/de/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/fi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/fr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/es/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/pyparamclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/sai/saicanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/hu/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/sai/dummyemcstat.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/ja/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/it/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/nb/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/pl/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/ro/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/sai/driver.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/ru/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/pyblock.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/sk/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/sr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/sv/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/cs/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/da/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/vi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/de/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/es/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/fr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/hu/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/it/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/nb/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/pl/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/sk/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/linuxcnc.h ../include/linuxcnc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/ini/emcIniFile.hh ../include/emcIniFile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/vi/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/ini/iniaxis.hh ../include/iniaxis.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized gmoccapy message catalog ../share/locale/sr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/ini/inijoint.hh ../include/inijoint.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/ini/inispindle.hh ../include/inispindle.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/ini/initraj.hh ../include/initraj.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/ini/inihal.hh ../include/inihal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/kinematics/cubic.h ../include/cubic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/kinematics/kinematics.h ../include/kinematics.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/kinematics/switchkins.h ../include/switchkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/kinematics/genhexkins.h ../include/genhexkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/kinematics/genserkins.h ../include/genserkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/kinematics/pentakins.h ../include/pentakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/kinematics/pumakins.h ../include/pumakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/tp/tc.h ../include/tc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/tp/tc_types.h ../include/tc_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/tp/tcq.h ../include/tcq.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/tp/tp.h ../include/tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/tp/tp_types.h ../include/tp_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/tp/spherical_arc.h ../include/spherical_arc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/tp/blendmath.h ../include/blendmath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/motion/emcmotcfg.h ../include/emcmotcfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/motion/motion.h ../include/motion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/motion/homing.h ../include/homing.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/motion/simple_tp.h ../include/simple_tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/motion/state_tag.h ../include/state_tag.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/motion/usrmotintf.h ../include/usrmotintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/motion/axis.h ../include/axis.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/canon.hh ../include/canon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/canon_position.hh ../include/canon_position.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/emctool.h ../include/emctool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/emc.hh ../include/emc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/emc_nml.hh ../include/emc_nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/emccfg.h ../include/emccfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/emcglb.h ../include/emcglb.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/emcpos.h ../include/emcpos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/emcpose.h ../include/emcpose.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/interp_return.hh ../include/interp_return.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/interpl.hh ../include/interpl.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/motion_types.h ../include/motion_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/nml_intf/debugflags.h ../include/debugflags.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/rs274ngc/interp_internal.hh ../include/interp_internal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/rs274ngc/interp_fwd.hh ../include/interp_fwd.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/rs274ngc/interp_base.hh ../include/interp_base.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/rs274ngc/modal_state.hh ../include/modal_state.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/rs274ngc/rs274ngc.hh ../include/rs274ngc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp emc/sai/saicanon.hh ../include/saicanon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp hal/hal.h ../include/hal.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp hal/hal_parport.h ../include/hal_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp hal/drivers/mesa-hostmot2/hostmot2-serial.h ../include/hostmot2-serial.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/locmem.hh ../include/locmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/memsem.hh ../include/memsem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/phantom.hh ../include/phantom.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/physmem.hh ../include/physmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/recvn.h ../include/recvn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/rem_msg.hh ../include/rem_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/sendn.h ../include/sendn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/shmem.hh ../include/shmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/buffer/tcpmem.hh ../include/tcpmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms.hh ../include/cms.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms_aup.hh ../include/cms_aup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms_cfg.hh ../include/cms_cfg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms_dup.hh ../include/cms_dup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms_srv.hh ../include/cms_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms_up.hh ../include/cms_up.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms_user.hh ../include/cms_user.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cms_xup.hh ../include/cms_xup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/cmsdiag.hh ../include/cmsdiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/tcp_opts.hh ../include/tcp_opts.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/cms/tcp_srv.hh ../include/tcp_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/inifile/inifile.h ../include/inifile.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/inifile/inifile.hh ../include/inifile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/pyemctypes.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/linklist/linklist.hh ../include/linklist.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/cmd_msg.hh ../include/cmd_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/nml.hh ../include/nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/nml_mod.hh ../include/nml_mod.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/nml_srv.hh ../include/nml_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/nml_oi.hh ../include/nml_oi.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/nml_type.hh ../include/nml_type.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/nmldiag.hh ../include/nmldiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/nmlmsg.hh ../include/nmlmsg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/nml/stat_msg.hh ../include/stat_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/os_intf/_sem.h ../include/_sem.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/os_intf/sem.hh ../include/sem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/os_intf/_shm.h ../include/_shm.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/os_intf/shm.hh ../include/shm.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/os_intf/_timer.h ../include/_timer.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/os_intf/timer.hh ../include/timer.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/posemath/posemath.h ../include/posemath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/posemath/gotypes.h ../include/gotypes.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/posemath/gomath.h ../include/gomath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/posemath/sincos.h ../include/sincos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/rcs/rcs.hh ../include/rcs.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/rcs/rcs_exit.hh ../include/rcs_exit.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/rcs/rcs_print.hh ../include/rcs_print.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp libnml/rcs/rcsversion.h ../include/rcsversion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi.h ../include/rtapi.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_app.h ../include/rtapi_app.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_atomic.h ../include/rtapi_atomic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_bitops.h ../include/rtapi_bitops.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_bool.h ../include/rtapi_bool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_byteorder.h ../include/rtapi_byteorder.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_device.h ../include/rtapi_device.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_firmware.h ../include/rtapi_firmware.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_gfp.h ../include/rtapi_gfp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_io.h ../include/rtapi_io.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_limits.h ../include/rtapi_limits.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_list.h ../include/rtapi_list.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_math.h ../include/rtapi_math.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_math_i386.h ../include/rtapi_math_i386.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_math64.h ../include/rtapi_math64.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_mutex.h ../include/rtapi_mutex.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_parport.h ../include/rtapi_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_pci.h ../include/rtapi_pci.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_slab.h ../include/rtapi_slab.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_stdint.h ../include/rtapi_stdint.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_ctype.h ../include/rtapi_ctype.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_errno.h ../include/rtapi_errno.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_string.h ../include/rtapi_string.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' cp rtapi/rtapi_vsnprintf.h ../include/rtapi_vsnprintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/da.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/cs.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/fi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/ja.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/rs274ngc_pre.cc In file included from emc/rs274ngc/rs274ngc_pre.cc:98: emc/rs274ngc/rs274ngc_pre.cc: In member function 'virtual int Interp::open(const char*)': emc/rs274ngc/rs274ngc_return.hh:80:47: warning: unknown conversion type character ')' in format [-Wformat=] 80 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN _("File ended with no percent sign (%)") | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ emc/rs274ngc/interp_internal.hh:872:19: note: in definition of macro 'ERS' 872 | setError (fmt, ## __VA_ARGS__); \ | ^~~ emc/rs274ngc/rs274ngc_pre.cc:1406:5: note: in expansion of macro 'CHKS' 1406 | CHKS((fgets(line, LINELEN, _setup.file_pointer) == | ^~~~ emc/rs274ngc/rs274ngc_return.hh:80:45: note: in expansion of macro '_' 80 | #define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN _("File ended with no percent sign (%)") | ^ emc/rs274ngc/rs274ngc_pre.cc:1407:17: note: in expansion of macro 'NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN' 1407 | NULL), NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/it.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/es.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/de.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/hu.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/fr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/nb.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/canonmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/pl.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/pt_BR.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/ro.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/sk.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/ru.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/sr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/sv.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/vi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/zh_CN.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/zh_HK.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling localized message catalog objects/zh_TW.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script hal_input Copying python script hal_input make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pyvcp Copying python script pyvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/pythonplugin/python_plugin.cc emc/pythonplugin/python_plugin.cc: In constructor 'PythonPlugin::PythonPlugin(_inittab*)': emc/pythonplugin/python_plugin.cc:298:22: warning: 'void Py_SetProgramName(const wchar_t*)' is deprecated [-Wdeprecated-declarations] 298 | Py_SetProgramName(program); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from /usr/include/boost/python/detail/wrap_python.hpp:178, from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/ssize_t.hpp:9, from /usr/include/boost/python/object.hpp:8, from emc/pythonplugin/python_plugin.hh:25, from emc/pythonplugin/python_plugin.cc:19: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ emc/pythonplugin/python_plugin.cc:326:3: warning: 'Py_UnbufferedStdioFlag' is deprecated [-Wdeprecated-declarations] 326 | Py_UnbufferedStdioFlag = 1; | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:48: /usr/include/python3.12/cpython/pydebug.h:20:37: note: declared here 20 | Py_DEPRECATED(3.12) PyAPI_DATA(int) Py_UnbufferedStdioFlag; | ^~~~~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script gladevcp Copying python script gladevcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script scorbot-er-3 Copying python script scorbot-er-3 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pmx485 Copying python script pmx485 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script sim-torch Copying python script sim-torch make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script mitsub_vfd Copying python script mitsub_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script z_level_compensation Copying python script z_level_compensation make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script mqtt-publisher Copying python script mqtt-publisher make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pumagui Copying python script pumagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script puma560gui Copying python script puma560gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script lineardelta Copying python script lineardelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script scaragui Copying python script scaragui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script hexagui Copying python script hexagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script 5axisgui Copying python script 5axisgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script max5gui Copying python script max5gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script maho600gui Copying python script maho600gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script hbmgui Copying python script hbmgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script melfagui Copying python script melfagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script rotarydelta Copying python script rotarydelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script millturngui Copying python script millturngui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script xyzac-trt-gui Copying python script xyzac-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script xyzbc-trt-gui Copying python script xyzbc-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script xyzab-tdr-gui Copying python script xyzab-tdr-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script axis-remote Copying python script axis-remote make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script linuxcnctop Copying python script linuxcnctop make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script mdi Copying python script mdi make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script hal_manualtoolchange Copying python script hal_manualtoolchange make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script lintini Copying python script lintini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script image-to-gcode emc/usr_intf/axis/scripts/image-to-gcode.py:550: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {![regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" emc/usr_intf/axis/scripts/image-to-gcode.py:552: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {![regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" Copying python script image-to-gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script axis Copying python script axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script debuglevel Copying python script debuglevel make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script tracking-test Copying python script tracking-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script teach-in Copying python script teach-in make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script touchy Copying python script touchy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file touchy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script hal_interface.py Copying python script hal_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying linuxcnc-wizard.gif make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script filechooser.py Copying python script filechooser.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script listing.py Copying python script listing.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file spindle.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script stepconf emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script stepconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script import_mach.py Copying python script import_mach.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file halui_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file axisx.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file axisy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file axisz.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file axisu.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file axisv.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file axisa.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file help.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script tests.py Copying python script tests.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script data.py emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file mesa0.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file mesa1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file external.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/axis/extensions/_toglmodule.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file screen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file vcp.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script private_data.py Copying python script private_data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file x_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file x_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pncconf Copying python script pncconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file y_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file z_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file y_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file a_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file z_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file a_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file s_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file realtime.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file dialogs.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file gscreen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file gscreen2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script gremlin.py Copying python script gremlin.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script gremlin Copying python script gremlin make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script qt5_graphics.py Copying python script qt5_graphics.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script keybindings.py Copying python script keybindings.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying INI script panelui_spec.ini cp emc/usr_intf/pyui/panelui_spec.ini ../lib/python/pyui/panelui_spec.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying INI script _panelui.ini cp emc/usr_intf/pyui/_panelui.ini ../lib/python/pyui/_panelui.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pyui Copying python script pyui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script gscreen Copying python script gscreen make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script master.py Copying python script master.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script __init__.py Copying python script __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script panelui_validate.py Copying python script panelui_validate.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script commands.py Copying python script commands.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script qtvcp Copying python script qtvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Copying glade file gmoccapy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script dialogs.py Copying python script dialogs.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script getiniinfo.py Copying python script getiniinfo.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script player.py Copying python script player.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script notification.py Copying python script notification.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script icon_theme_helper.py Copying python script icon_theme_helper.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script gmoccapy Copying python script gmoccapy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script qtplasmac-materials emc/usr_intf/qtplasmac/qtplasmac-materials.py:288: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Tool\ number'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:294: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Kerf\ width'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:298: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:302: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ delay'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:305: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:309: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Feed\ rate'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:319: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pause\ at\ end\ of\ cut'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): Copying python script qtplasmac-materials make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script qtplasmac-cfg2prefs Copying python script qtplasmac-cfg2prefs make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script pmx485-test Copying python script pmx485-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script M190 Copying python script M190 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script qtplasmac-plasmac2qt Copying python script qtplasmac-plasmac2qt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script qtplasmac_gcode Copying python script qtplasmac_gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script mdro Copying python script mdro make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/interpmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/debounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script update_ini emc/ini/update_ini.py:17: SyntaxWarning: invalid escape sequence '\s' regex = "^\s*\[%s\](.+?)(?:^\s*\[|\Z)" % block emc/ini/update_ini.py:181: SyntaxWarning: invalid escape sequence '\s' all_sections = re.findall("^\s*\[(.+)\]", inistring, re.MULTILINE) emc/ini/update_ini.py:193: SyntaxWarning: invalid escape sequence '\[' section = re.match("(.*?)^\[", inistring, re.DOTALL | re.MULTILINE) emc/ini/update_ini.py:199: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:218: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[RS274NGC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:236: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMCMOT\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:267: SyntaxWarning: invalid escape sequence '\w' match = re.match('(?:#autoconverted|loadrt) +(\w+kins)', line) emc/ini/update_ini.py:270: SyntaxWarning: invalid escape sequence '\w' match = re.search('coordinates *= *(\w+)', line) emc/ini/update_ini.py:274: SyntaxWarning: invalid escape sequence '\w' match = re.search('kinstype *= *(\w+)', line) emc/ini/update_ini.py:289: SyntaxWarning: invalid escape sequence '\d' match = re.match('setp +gantrykins.joint-(\d) +(\d)', line) emc/ini/update_ini.py:301: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[TRAJ\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:309: SyntaxWarning: invalid escape sequence '\s' mv = re.findall("MAX_VELOCITY[\s=]+(\d*(\.\d+)?)", inistring, re.MULTILINE) emc/ini/update_ini.py:341: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[JOINT_%i\])"%j, inistring, re.MULTILINE): emc/ini/update_ini.py:342: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[AXIS_%s\])" % "XYZABCUVW"[j], inistring, re.MULTILINE): emc/ini/update_ini.py:388: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % J, inistring, re.DOTALL) emc/ini/update_ini.py:390: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % "XYZABCUVW".index(coordinates[J]), inistring, re.DOTALL) emc/ini/update_ini.py:394: SyntaxWarning: invalid escape sequence '\[' if not '\[AXIS_%i\]' % axisnum in subs: emc/ini/update_ini.py:395: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % axisnum : '[JOINT_%i]' % J}) emc/ini/update_ini.py:396: SyntaxWarning: invalid escape sequence '\.' subs2.update({'joint\.%i\.' % axisnum : 'joint.%i.' % J}) emc/ini/update_ini.py:398: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % J : '[JOINT_%i]' % J}) emc/ini/update_ini.py:487: SyntaxWarning: invalid escape sequence '\[' 'num_joints=\[TRAJ\]AXES': 'num_joints=[KINS]JOINTS', emc/ini/update_ini.py:498: SyntaxWarning: invalid escape sequence '\s' '^\s*setp\s+(joint\S+)\s+(axis\S+)\s+(\S+)\s*$': Copying python script update_ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/pyarrays.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/counter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/halmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/enum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/encoder_ratio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/boss_plc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/threads.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/mux_generic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/siggen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/supply.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/weighted_sum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/sim_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/pid.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/lcd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/modmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/streamer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/hal_speaker.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/components/sampler.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/cpuinfo.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/usr_intf/axis/extensions/emcmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/hal_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/hal_pi_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/hal_bb_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/bitfile.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/dpll.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/bspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/abs_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/inm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/led.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/inmux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/task/taskmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hostmot2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/ioport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/hal_ppmc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/gcodemodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/pins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/raw.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/rcpwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/pktuart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/hal_gm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/outm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/resolver.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/ssr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/tram.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/tp_pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/rs274ngc/pyinterp1.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_pci.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i43.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i90.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/module_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/setsserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_spi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/xy2mod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/utils/scope_rt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/trivkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/maxkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_eth.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_rpspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/kins_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/rotatekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/corexykins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/tripodkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/lineardeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/pentakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/drivers/mesa-hostmot2/sserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/rotarydeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/rosekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/scorbot-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/userkfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/genserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/switchkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/xyzac-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/xyzbc-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/scarakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/cubic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/genhexkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/5axiskins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/trtfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/pumakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/homemod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/tp/tpmod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/tp/tcq.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/tp/spherical_arc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/kinematics/lineardeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/tp/tc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/motion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking liblinuxcnc.a make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/homing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Syntax checking python script halcompile Copying python script halcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/tp/blendmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling emc/kinematics/rotarydeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/command.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking linuxcnc_module_helper make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/boss_plc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/debounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/motion/control.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' config.status: creating ../scripts/setup_designer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/enum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/counter.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime emc/tp/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/encoder_ratio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/lcd.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/stepgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating shared library liblinuxcncini.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mux_generic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' tooldata: depends: objects/emc/tooldata/tooldata_mmap.o objects/emc/tooldata/tooldata_common.o objects/emc/tooldata/tooldata_db.o tooldata: Linking: libtooldata.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/pwmgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/siggen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking python module _togl.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/pid.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/threads.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/supply.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/weighted_sum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/watchdog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sim_encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/modmath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking python module lineardeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/lineardeltakins.so objects/emc/kinematics/lineardeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/streamer.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sampler.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hal_gm.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hal_speaker.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hal_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hal_bb_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hal_ppmc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hal_pi_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hm2_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hm2_pci.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hm2_7i43.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hostmot2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/setsserial.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hm2_7i90.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hm2_eth.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hm2_spi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hm2_rpspi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/classicladder_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/scope_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/maxkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/trivkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hal_lib.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/rotatekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/tripodkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/lineardeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/corexykins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/pentakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating shared library liblinuxcnchal.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/rotarydeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/scorbot-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/rosekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/genhexkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/xyzac-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ln -sf liblinuxcncini.so.0 ../lib/liblinuxcncini.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ln -sf liblinuxcnchal.so.0 ../lib/liblinuxcnchal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/genserkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/xyzbc-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/scarakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/pumakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/5axiskins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/motmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/homemod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/tpmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage abs.9 rm -f ../docs/man/man9/abs.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage abs_s32.9 rm -f ../docs/man/man9/abs_s32.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage and2.9 rm -f ../docs/man/man9/and2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage anglejog.9 rm -f ../docs/man/man9/anglejog.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage axistest.9 rm -f ../docs/man/man9/axistest.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage bin2gray.9 rm -f ../docs/man/man9/bin2gray.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking inivar make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage biquad.9 rm -f ../docs/man/man9/biquad.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage bitslice.9 rm -f ../docs/man/man9/bitslice.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage bitwise.9 rm -f ../docs/man/man9/bitwise.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage blend.9 rm -f ../docs/man/man9/blend.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage bldc.9 :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' rm -f ../docs/man/man9/bldc.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage carousel.9 rm -f ../docs/man/man9/carousel.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage charge_pump.9 rm -f ../docs/man/man9/charge_pump.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage clarke2.9 rm -f ../docs/man/man9/clarke2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage clarke3.9 rm -f ../docs/man/man9/clarke3.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage clarkeinv.9 rm -f ../docs/man/man9/clarkeinv.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage comp.9 rm -f ../docs/man/man9/comp.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage constant.9 rm -f ../docs/man/man9/constant.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_bit_s32.9 rm -f ../docs/man/man9/conv_bit_s32.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_bit_u32.9 rm -f ../docs/man/man9/conv_bit_u32.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_bit_float.9 rm -f ../docs/man/man9/conv_bit_float.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_float_s32.9 rm -f ../docs/man/man9/conv_float_s32.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_float_u32.9 rm -f ../docs/man/man9/conv_float_u32.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_s32_bit.9 rm -f ../docs/man/man9/conv_s32_bit.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_s32_float.9 rm -f ../docs/man/man9/conv_s32_float.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_s32_u32.9 rm -f ../docs/man/man9/conv_s32_u32.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_u32_bit.9 rm -f ../docs/man/man9/conv_u32_bit.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_u32_float.9 rm -f ../docs/man/man9/conv_u32_float.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage conv_u32_s32.9 rm -f ../docs/man/man9/conv_u32_s32.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage corexy_by_hal.9 rm -f ../docs/man/man9/corexy_by_hal.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage dbounce.9 rm -f ../docs/man/man9/dbounce.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage deadzone.9 rm -f ../docs/man/man9/deadzone.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage ddt.9 rm -f ../docs/man/man9/ddt.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage demux.9 rm -f ../docs/man/man9/demux.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage differential.9 rm -f ../docs/man/man9/differential.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage div2.9 rm -f ../docs/man/man9/div2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage edge.9 rm -f ../docs/man/man9/edge.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage estop_latch.9 rm -f ../docs/man/man9/estop_latch.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage eoffset_per_angle.9 rm -f ../docs/man/man9/eoffset_per_angle.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage feedcomp.9 rm -f ../docs/man/man9/feedcomp.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage filter_kalman.9 rm -f ../docs/man/man9/filter_kalman.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage flipflop.9 rm -f ../docs/man/man9/flipflop.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage gearchange.9 rm -f ../docs/man/man9/gearchange.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage gantry.9 rm -f ../docs/man/man9/gantry.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage gray2bin.9 rm -f ../docs/man/man9/gray2bin.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage histobins.9 :1: SyntaxWarning: invalid escape sequence '\-' rm -f ../docs/man/man9/histobins.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage homecomp.9 rm -f ../docs/man/man9/homecomp.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage hypot.9 rm -f ../docs/man/man9/hypot.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage invert.9 rm -f ../docs/man/man9/invert.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage ilowpass.9 rm -f ../docs/man/man9/ilowpass.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage integ.9 rm -f ../docs/man/man9/integ.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage joyhandle.9 :1: SyntaxWarning: invalid escape sequence '\-' rm -f ../docs/man/man9/joyhandle.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage knob2float.9 rm -f ../docs/man/man9/knob2float.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage limit1.9 rm -f ../docs/man/man9/limit1.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage limit2.9 rm -f ../docs/man/man9/limit2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage latencybins.9 :1: SyntaxWarning: invalid escape sequence '\(' rm -f ../docs/man/man9/latencybins.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage limit3.9 rm -f ../docs/man/man9/limit3.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage limit_axis.9 rm -f ../docs/man/man9/limit_axis.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage lincurve.9 rm -f ../docs/man/man9/lincurve.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage logic.9 rm -f ../docs/man/man9/logic.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage lowpass.9 rm -f ../docs/man/man9/lowpass.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage maj3.9 rm -f ../docs/man/man9/maj3.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage lut5.9 :1: SyntaxWarning: invalid escape sequence '\*' rm -f ../docs/man/man9/lut5.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage max31855.9 rm -f ../docs/man/man9/max31855.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage match8.9 rm -f ../docs/man/man9/match8.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mesa_pktgyro_test.9 rm -f ../docs/man/man9/mesa_pktgyro_test.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage message.9 rm -f ../docs/man/man9/message.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage millturn.9 rm -f ../docs/man/man9/millturn.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage minmax.9 rm -f ../docs/man/man9/minmax.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mult2.9 rm -f ../docs/man/man9/mult2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage moveoff.9 rm -f ../docs/man/man9/moveoff.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage multiswitch.9 rm -f ../docs/man/man9/multiswitch.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage multiclick.9 rm -f ../docs/man/man9/multiclick.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mux16.9 rm -f ../docs/man/man9/mux16.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mux2.9 rm -f ../docs/man/man9/mux2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mux4.9 rm -f ../docs/man/man9/mux4.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mux8.9 rm -f ../docs/man/man9/mux8.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage near.9 rm -f ../docs/man/man9/near.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage not.9 rm -f ../docs/man/man9/not.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage offset.9 rm -f ../docs/man/man9/offset.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage ohmic.9 rm -f ../docs/man/man9/ohmic.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage oneshot.9 rm -f ../docs/man/man9/oneshot.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage or2.9 rm -f ../docs/man/man9/or2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage orient.9 rm -f ../docs/man/man9/orient.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage scale.9 rm -f ../docs/man/man9/scale.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sample_hold.9 rm -f ../docs/man/man9/sample_hold.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage scaled_s32_sums.9 rm -f ../docs/man/man9/scaled_s32_sums.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage select8.9 rm -f ../docs/man/man9/select8.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sim_home_switch.9 rm -f ../docs/man/man9/sim_home_switch.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sim_axis_hardware.9 rm -f ../docs/man/man9/sim_axis_hardware.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage plasmac.9 rm -f ../docs/man/man9/plasmac.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sim_matrix_kb.9 rm -f ../docs/man/man9/sim_matrix_kb.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sim_parport.9 :1: SyntaxWarning: invalid escape sequence '\-' rm -f ../docs/man/man9/sim_parport.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sim_spindle.9 rm -f ../docs/man/man9/sim_spindle.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage simple_tp.9 rm -f ../docs/man/man9/simple_tp.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sphereprobe.9 rm -f ../docs/man/man9/sphereprobe.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage spindle_monitor.9 rm -f ../docs/man/man9/spindle_monitor.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage sum2.9 rm -f ../docs/man/man9/sum2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage spindle.9 rm -f ../docs/man/man9/spindle.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage thc.9 rm -f ../docs/man/man9/thc.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage steptest.9 rm -f ../docs/man/man9/steptest.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage thcud.9 rm -f ../docs/man/man9/thcud.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage threadtest.9 rm -f ../docs/man/man9/threadtest.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage time.9 rm -f ../docs/man/man9/time.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage timedelay.9 rm -f ../docs/man/man9/timedelay.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage timedelta.9 rm -f ../docs/man/man9/timedelta.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage tof.9 rm -f ../docs/man/man9/tof.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage toggle.9 rm -f ../docs/man/man9/toggle.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage toggle2nist.9 :1: SyntaxWarning: invalid escape sequence '\[' rm -f ../docs/man/man9/toggle2nist.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking rtapi_app make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage ton.9 rm -f ../docs/man/man9/ton.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage tp.9 rm -f ../docs/man/man9/tp.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage tristate_float.9 rm -f ../docs/man/man9/tristate_float.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage tristate_bit.9 rm -f ../docs/man/man9/tristate_bit.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage updown.9 rm -f ../docs/man/man9/updown.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage userkins.9 rm -f ../docs/man/man9/userkins.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage wcomp.9 rm -f ../docs/man/man9/wcomp.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage xhc_hb04_util.9 rm -f ../docs/man/man9/xhc_hb04_util.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage xor2.9 rm -f ../docs/man/man9/xor2.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage xyzab_tdr_kins.9 rm -f ../docs/man/man9/xyzab_tdr_kins.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage serport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mesa_7i65.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage tpcomp.9 rm -f ../docs/man/man9/tpcomp.9.new make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage mesa_uart.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Making halcompile manpage thermistor.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking halstreamer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing thermistor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating shared library libposemath.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking halsampler make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking panelui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking shuttle make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking hy_gt_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking svd-ps_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking sendkeys make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking gs2_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing wj200_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing pi500_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking vfs11_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ln -sf libtooldata.so.0 ../lib/libtooldata.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking halmeter make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking vfdb_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking xhc-hb04 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing abs.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing abs_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing and2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing anglejog.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing axistest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking hy_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing bin2gray.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking mb2hal make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing biquad.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing bitwise.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing blend.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing bldc.comp :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing carousel.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking python module rotarydeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/rotarydeltakins.so objects/emc/kinematics/rotarydeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing charge_pump.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing clarke3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing clarke2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing clarkeinv.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing comp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing constant.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking halrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing corexy_by_hal.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing dbounce.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing ddt.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing deadzone.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing demux.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing differential.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking python module _hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing div2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing edge.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing estop_latch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing eoffset_per_angle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing feedcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing filter_kalman.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing flipflop.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing gantry.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing gray2bin.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing gearchange.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing histobins.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing homecomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing hypot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing ilowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing invert.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing integ.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing joyhandle.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing knob2float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking halscope make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing latencybins.comp :1: SyntaxWarning: invalid escape sequence '\(' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing limit1.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing limit2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing limit3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing limit_axis.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing lowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing lut5.comp :1: SyntaxWarning: invalid escape sequence '\*' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing maj3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing match8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing max31855.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mesa_pktgyro_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing millturn.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing minmax.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mult2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing message.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing moveoff.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing multiclick.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing multiswitch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mux16.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mux2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mux4.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mux8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing near.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing not.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing offset.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing ohmic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing oneshot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing or2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing orient.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sample_hold.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing scale.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing scaled_s32_sums.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing select8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sim_home_switch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sim_axis_hardware.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sim_matrix_kb.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing plasmac.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sim_parport.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sim_spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking halcmd hal/utils/../hal_priv.h:135:27: warning: type of 'hal_data' does not match original declaration [-Wlto-type-mismatch] 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:246:16: note: type 'struct hal_data_t' should match type 'struct hal_data_t' 246 | typedef struct hal_data_t { | ^ hal/utils/../hal_priv.h:135:27: note: 'hal_data' was previously declared here 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:135:27: note: code may be misoptimized unless '-fno-strict-aliasing' is used make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing simple_tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking classicladder make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sphereprobe.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing spindle_monitor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing sum2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing steptest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing thcud.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing thc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing threadtest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing time.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing timedelay.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing timedelta.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing tof.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing toggle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing toggle2nist.comp :1: SyntaxWarning: invalid escape sequence '\[' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing ton.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing tristate_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing tristate_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing updown.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing userkins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing wcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing xhc_hb04_util.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing xor2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing xyzab_tdr_kins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing serport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mesa_7i65.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Preprocessing mesa_uart.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/abs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/abs_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/and2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking libpyplugin.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,libpyplugin.so.0 -shared -o ../lib/libpyplugin.so.0 objects/emc/pythonplugin/python_plugin.o ../lib/liblinuxcncini.so -lstdc++ -lboost_python312-mt -L/usr/lib64 -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/bin2gray.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/bitwise.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/axistest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/bitslice.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/charge_pump.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/blend.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/biquad.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/clarke3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/clarke2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/anglejog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/comp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/constant.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_bit_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/clarkeinv.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_bit_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_bit_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_float_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_float_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_s32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_s32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_s32_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_u32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_u32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/conv_u32_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/corexy_by_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/dbounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/ddt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/carousel.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/deadzone.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/demux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/differential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/bldc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/div2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking xhc-whb04b-6 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/edge.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/estop_latch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/feedcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/flipflop.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/gray2bin.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/gearchange.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/filter_kalman.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/eoffset_per_angle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/gantry.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/homecomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/integ.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/hypot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/histobins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/ilowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/knob2float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/invert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/limit1.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/latencybins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/joyhandle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/limit2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/lowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/lincurve.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/lut5.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/logic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/maj3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/limit_axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/match8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/message.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/minmax.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/limit3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/mult2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/mesa_pktgyro_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/millturn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/multiswitch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/mux2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/max31855.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/mux4.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/mux16.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/multiclick.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/not.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/mux8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/offset.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/near.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/or2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/ohmic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sample_hold.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/scale.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/select8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/scaled_s32_sums.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/orient.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sim_home_switch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/moveoff.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sim_matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sphereprobe.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sim_spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sum2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sim_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/steptest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/spindle_monitor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/threadtest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/thcud.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/thc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/timedelay.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/tof.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/toggle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/time.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/timedelta.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/sim_axis_hardware.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/toggle2nist.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/ton.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ln -sf libposemath.so.0 ../lib/libposemath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/tristate_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/tristate_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ln -sf libpyplugin.so.0 ../lib/libpyplugin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/updown.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/wcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/xor2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/drivers/serport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/userkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/drivers/mesa_uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling objects/hal/user_comps/thermistor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/xhc_hb04_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/xyzab_tdr_kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/abs.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/abs_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/and2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/wj200_vfd/wj200_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/drivers/mesa_7i65.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/anglejog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling hal/user_comps/pi500_vfd/pi500_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/axistest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/bin2gray.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/biquad.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/bitwise.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/bitslice.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/bldc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/blend.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/carousel.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/charge_pump.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/clarke2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/clarkeinv.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/clarke3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/comp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/constant.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_bit_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_bit_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_bit_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_float_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_s32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_float_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_s32_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_s32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_u32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_u32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/corexy_by_hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/dbounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/conv_u32_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/ddt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' emc/Submakefile:Linking genserkins make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/deadzone.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/differential.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/demux.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/div2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/edge.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/eoffset_per_angle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/estop_latch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/feedcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/filter_kalman.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/flipflop.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/gantry.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/gearchange.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/gray2bin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/histobins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/homecomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/hypot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/ilowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/integ.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/invert.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/joyhandle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/latencybins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/knob2float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Compiling realtime objects/hal/components/plasmac.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/limit1.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/limit3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/limit2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/limit_axis.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/lincurve.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/logic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/lowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/lut5.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/match8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/maj3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/max31855.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mesa_pktgyro_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/message.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/millturn.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/minmax.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/moveoff.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mult2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/multiclick.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/multiswitch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mux16.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mux2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mux4.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/near.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mux8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/not.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/offset.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/ohmic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/oneshot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/orient.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/or2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/plasmac.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/scale.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sample_hold.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/scaled_s32_sums.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/select8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sim_axis_hardware.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sim_home_switch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sim_matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sim_spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sim_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/simple_tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sphereprobe.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/spindle_monitor.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/steptest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/sum2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/thc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/thcud.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/threadtest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/time.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/timedelay.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/timedelta.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/tof.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/toggle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/toggle2nist.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/ton.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/tristate_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/tristate_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/userkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/updown.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/wcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/xhc_hb04_util.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/xyzab_tdr_kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/xor2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mesa_7i65.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/serport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking ../rtlib/mesa_uart.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking thermistor make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking pi500_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking wj200_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Creating shared library libnml.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ln -sf libnml.so.0 ../lib/libnml.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking motion-logger make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking linuxcncsvr make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking io make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking iov2 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking linuxcnclcd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking schedrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking linuxcncrsh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking python module linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking halui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking librs274.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,librs274.so.0 -shared -o ../lib/librs274.so.0 objects/emc/rs274ngc/interp_arc.o objects/emc/rs274ngc/interp_array.o objects/emc/rs274ngc/interp_base.o objects/emc/rs274ngc/interp_check.o objects/emc/rs274ngc/interp_convert.o objects/emc/rs274ngc/interp_queue.o objects/emc/rs274ngc/interp_cycles.o objects/emc/rs274ngc/interp_execute.o objects/emc/rs274ngc/interp_find.o objects/emc/rs274ngc/interp_internal.o objects/emc/rs274ngc/interp_inverse.o objects/emc/rs274ngc/interp_read.o objects/emc/rs274ngc/interp_write.o objects/emc/rs274ngc/interp_o_word.o objects/emc/rs274ngc/interp_g7x.o objects/emc/rs274ngc/modal_state.o objects/emc/rs274ngc/nurbs_additional_functions.o objects/emc/rs274ngc/interp_namedparams.o objects/emc/rs274ngc/interp_python.o objects/emc/rs274ngc/interp_remap.o objects/emc/rs274ngc/interp_setup.o objects/emc/rs274ngc/canonmodule.o objects/emc/rs274ngc/pyparamclass.o objects/emc/rs274ngc/pyemctypes.o objects/emc/rs274ngc/pyinterp1.o objects/emc/rs274ngc/pyblock.o objects/emc/rs274ngc/pyarrays.o objects/emc/rs274ngc/interpmodule.o objects/emc/rs274ngc/rs274ngc_pre.o objects/emc/rs274ngc/interp_inspection.o ../lib/liblinuxcncini.so ../lib/libpyplugin.so ../lib/liblinuxcnchal.so.0 ../lib/libtooldata.so.0 -lstdc++ -lboost_python312-mt -L/usr/lib64 -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' ln -sf librs274.so.0 ../lib/librs274.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking canterp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking python module gcode.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/gcode.so objects/emc/rs274ngc/gcodemodule.o ../lib/librs274.so.0 -lstdc++ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking rs274 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Linking milltask c++ -std=gnu++17 -o ../bin/milltask objects/emc/motion/emcmotglb.o objects/emc/task/emctask.o objects/emc/task/emccanon.o objects/emc/task/emctaskmain.o objects/emc/motion/usrmotintf.o objects/emc/motion/emcmotutil.o objects/emc/task/taskintf.o objects/emc/motion/dbuf.o objects/emc/motion/stashf.o objects/emc/task/taskmodule.o objects/emc/task/taskclass.o objects/emc/task/backtrace.o ../lib/librs274.so.0 ../lib/liblinuxcnc.a ../lib/libnml.so.0 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/liblinuxcnchal.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -lboost_python312-mt -L/usr/lib64 -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' + popd ~/RPM/BUILD/linuxcnc-2.9.3 + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.31058 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/linuxcnc-buildroot + : + /bin/rm -rf -- /usr/src/tmp/linuxcnc-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/usr/bin:/bin:/usr/local/bin:/usr/games + cd linuxcnc-2.9.3 + pushd src ~/RPM/BUILD/linuxcnc-2.9.3/src ~/RPM/BUILD/linuxcnc-2.9.3 + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/linuxcnc-buildroot make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/bin \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../rtlib/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules /usr/libexec/rpm-build/install -p -m 4755 ../bin/linuxcnc_module_helper /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 4755 ../bin/rtapi_app /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../scripts/rtapi.conf /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/src/tmp/linuxcnc-buildroot/usr/lib64 \ /usr/src/tmp/linuxcnc-buildroot/lib/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles \ /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/scripts \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/msgs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-4/language-specs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/*.py ../lib/python/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/rs274/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/touchy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gscreen/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/*.{py,ui,txt} /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/designer/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/designer /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/widget_icons/*.{png,gif} /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/plugins/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins cp -dR ../lib/python/qtvcp/lib/* /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gmoccapy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/*.{py,png,glade} /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/stepconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pncconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pyui/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/plasmac/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0755 ../bin/stepconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pncconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_input /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mitsub_vfd /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mqtt-publisher /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/z_level_compensation /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pmx485 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/sim-torch /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gladevcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis-remote /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/debuglevel /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/linuxcnctop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mdi /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_manualtoolchange /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/image-to-gcode /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/touchy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gscreen /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../lib/python/qtvcp/designer/install_script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -m 0755 ../bin/gmoccapy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/teach-in /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/scorbot-er-3 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pumagui ../bin/puma560gui ../bin/lineardelta ../bin/scaragui ../bin/hexagui ../bin/5axisgui ../bin/max5gui ../bin/maho600gui ../bin/hbmgui ../bin/rotarydelta ../bin/melfagui ../bin/millturngui ../bin/xyzac-trt-gui ../bin/xyzbc-trt-gui ../bin/xyzab-tdr-gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtplasmac-materials ../bin/qtplasmac-plasmac2qt ../bin/qtplasmac-cfg2prefs ../bin/qtplasmac_gcode ../bin/pmx485-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/linuxcnc-wizard.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/images/*.{png,gif,xbm,ngc} /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/tcl/*.tcl /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl /usr/libexec/rpm-build/install -p -m 0644 ../share/gscreen/images/*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images cp -dR ../share/gscreen/skins/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins cp -dR ../share/qtvcp/images/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images cp -dR ../share/qtvcp/screens/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens cp -dR ../share/qtvcp/panels/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels cp -dR ../share/qtvcp/widgets_ui/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui cp -dR ../share/gmoccapy/icons/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man1/*.1 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/hal_add_funct_to_thread.3hal ../docs/man/man3/hal_bit_t.3hal ../docs/man/man3/hal_bool.3hal ../docs/man/man3/hal_create_thread.3hal ../docs/man/man3/hal_del_funct_from_thread.3hal ../docs/man/man3/hal_exit.3hal ../docs/man/man3/hal_export_funct.3hal ../docs/man/man3/hal_float_t.3hal ../docs/man/man3/hal_get_lock.3hal ../docs/man/man3/hal_init.3hal ../docs/man/man3/hal_link.3hal ../docs/man/man3/hal_malloc.3hal ../docs/man/man3/hal_param_alias.3hal ../docs/man/man3/hal_param_bit_new.3hal ../docs/man/man3/hal_param_bit_newf.3hal ../docs/man/man3/hal_param_float_new.3hal ../docs/man/man3/hal_param_float_newf.3hal ../docs/man/man3/hal_param_new.3hal ../docs/man/man3/hal_param_s32_new.3hal ../docs/man/man3/hal_param_s32_newf.3hal ../docs/man/man3/hal_param_u32_new.3hal ../docs/man/man3/hal_param_u32_newf.3hal ../docs/man/man3/hal_parport.3hal ../docs/man/man3/hal_pin_alias.3hal ../docs/man/man3/hal_pin_bit_new.3hal ../docs/man/man3/hal_pin_bit_newf.3hal ../docs/man/man3/hal_pin_float_new.3hal ../docs/man/man3/hal_pin_float_newf.3hal ../docs/man/man3/hal_pin_new.3hal ../docs/man/man3/hal_pin_port_new.3hal ../docs/man/man3/hal_pin_port_newf.3hal ../docs/man/man3/hal_pin_s32_new.3hal ../docs/man/man3/hal_pin_s32_newf.3hal ../docs/man/man3/hal_pin_u32_new.3hal ../docs/man/man3/hal_pin_u32_newf.3hal ../docs/man/man3/hal_port.3hal ../docs/man/man3/hal_ready.3hal ../docs/man/man3/hal_s32_t.3hal ../docs/man/man3/hal_set_constructor.3hal ../docs/man/man3/hal_set_lock.3hal ../docs/man/man3/hal_signal_delete.3hal ../docs/man/man3/hal_signal_new.3hal ../docs/man/man3/hal_start_threads.3hal ../docs/man/man3/hal_stream.3hal ../docs/man/man3/hal_type_t.3hal ../docs/man/man3/hal_u32_t.3hal ../docs/man/man3/hal_unlink.3hal ../docs/man/man3/intro.3hal ../docs/man/man3/undocumented.3hal /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/EXPORT_FUNCTION.3rtapi ../docs/man/man3/MODULE_AUTHOR.3rtapi ../docs/man/man3/MODULE_DESCRIPTION.3rtapi ../docs/man/man3/MODULE_LICENSE.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi ../docs/man/man3/RTAPI_MP_INT.3rtapi ../docs/man/man3/RTAPI_MP_LONG.3rtapi ../docs/man/man3/RTAPI_MP_STRING.3rtapi ../docs/man/man3/intro.3rtapi ../docs/man/man3/rtapi_app_exit.3rtapi ../docs/man/man3/rtapi_app_main.3rtapi ../docs/man/man3/rtapi_atomic.3rtapi ../docs/man/man3/rtapi_bool.3rtapi ../docs/man/man3/rtapi_byteorder.3rtapi ../docs/man/man3/rtapi_clock_set_period.3rtapi ../docs/man/man3/rtapi_delay.3rtapi ../docs/man/man3/rtapi_delay_max.3rtapi ../docs/man/man3/rtapi_device.3rtapi ../docs/man/man3/rtapi_div_u64.3rtapi ../docs/man/man3/rtapi_div_u64_rem.3rtapi ../docs/man/man3/rtapi_exit.3rtapi ../docs/man/man3/rtapi_firmware.3rtapi ../docs/man/man3/rtapi_get_clocks.3rtapi ../docs/man/man3/rtapi_get_msg_level.3rtapi ../docs/man/man3/rtapi_get_time.3rtapi ../docs/man/man3/rtapi_gfp.3rtapi ../docs/man/man3/rtapi_inb.3rtapi ../docs/man/man3/rtapi_init.3rtapi ../docs/man/man3/rtapi_io.3rtapi ../docs/man/man3/rtapi_is.3rtapi ../docs/man/man3/rtapi_list.3rtapi ../docs/man/man3/rtapi_module_param.3rtapi ../docs/man/man3/rtapi_mutex.3rtapi ../docs/man/man3/rtapi_open_as_root.3rtapi ../docs/man/man3/rtapi_outb.3rtapi ../docs/man/man3/rtapi_parport.3rtapi ../docs/man/man3/rtapi_pci.3rtapi ../docs/man/man3/rtapi_print.3rtapi ../docs/man/man3/rtapi_prio.3rtapi ../docs/man/man3/rtapi_prio_highest.3rtapi ../docs/man/man3/rtapi_prio_lowest.3rtapi ../docs/man/man3/rtapi_prio_next_higher.3rtapi ../docs/man/man3/rtapi_prio_next_lower.3rtapi ../docs/man/man3/rtapi_region.3rtapi ../docs/man/man3/rtapi_release_region.3rtapi ../docs/man/man3/rtapi_request_region.3rtapi ../docs/man/man3/rtapi_set_msg_level.3rtapi ../docs/man/man3/rtapi_shmem.3rtapi ../docs/man/man3/rtapi_shmem_delete.3rtapi ../docs/man/man3/rtapi_shmem_getptr.3rtapi ../docs/man/man3/rtapi_shmem_new.3rtapi ../docs/man/man3/rtapi_slab.3rtapi ../docs/man/man3/rtapi_snprintf.3rtapi ../docs/man/man3/rtapi_stdint.3rtapi ../docs/man/man3/rtapi_string.3rtapi ../docs/man/man3/rtapi_strlcpy.3rtapi ../docs/man/man3/rtapi_task_delete.3rtapi ../docs/man/man3/rtapi_task_new.3rtapi ../docs/man/man3/rtapi_task_pause.3rtapi ../docs/man/man3/rtapi_task_resume.3rtapi ../docs/man/man3/rtapi_task_self.3rtapi ../docs/man/man3/rtapi_task_start.3rtapi ../docs/man/man3/rtapi_task_wait.3rtapi ../docs/man/man3/undocumented.3rtapi /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man9/abs.9 ../docs/man/man9/abs_s32.9 ../docs/man/man9/and2.9 ../docs/man/man9/anglejog.9 ../docs/man/man9/at_pid.9 ../docs/man/man9/axis.9 ../docs/man/man9/axistest.9 ../docs/man/man9/bin2gray.9 ../docs/man/man9/biquad.9 ../docs/man/man9/bitslice.9 ../docs/man/man9/bitwise.9 ../docs/man/man9/bldc.9 ../docs/man/man9/blend.9 ../docs/man/man9/carousel.9 ../docs/man/man9/charge_pump.9 ../docs/man/man9/clarke2.9 ../docs/man/man9/clarke3.9 ../docs/man/man9/clarkeinv.9 ../docs/man/man9/classicladder.9 ../docs/man/man9/comp.9 ../docs/man/man9/constant.9 ../docs/man/man9/conv_bit_float.9 ../docs/man/man9/conv_bit_s32.9 ../docs/man/man9/conv_bit_u32.9 ../docs/man/man9/conv_float_s32.9 ../docs/man/man9/conv_float_u32.9 ../docs/man/man9/conv_s32_bit.9 ../docs/man/man9/conv_s32_float.9 ../docs/man/man9/conv_s32_u32.9 ../docs/man/man9/conv_u32_bit.9 ../docs/man/man9/conv_u32_float.9 ../docs/man/man9/conv_u32_s32.9 ../docs/man/man9/corexy_by_hal.9 ../docs/man/man9/counter.9 ../docs/man/man9/dbounce.9 ../docs/man/man9/ddt.9 ../docs/man/man9/deadzone.9 ../docs/man/man9/debounce.9 ../docs/man/man9/demux.9 ../docs/man/man9/differential.9 ../docs/man/man9/div2.9 ../docs/man/man9/edge.9 ../docs/man/man9/encoder.9 ../docs/man/man9/encoder_ratio.9 ../docs/man/man9/enum.9 ../docs/man/man9/eoffset_per_angle.9 ../docs/man/man9/estop_latch.9 ../docs/man/man9/feedcomp.9 ../docs/man/man9/filter_kalman.9 ../docs/man/man9/flipflop.9 ../docs/man/man9/gantry.9 ../docs/man/man9/gantrykins.9 ../docs/man/man9/gearchange.9 ../docs/man/man9/genhexkins.9 ../docs/man/man9/genserkins.9 ../docs/man/man9/gentrivkins.9 ../docs/man/man9/gladevcp.9 ../docs/man/man9/gray2bin.9 ../docs/man/man9/hal_bb_gpio.9 ../docs/man/man9/hal_parport.9 ../docs/man/man9/histobins.9 ../docs/man/man9/hm2_7i43.9 ../docs/man/man9/hm2_7i90.9 ../docs/man/man9/hm2_eth.9 ../docs/man/man9/hm2_pci.9 ../docs/man/man9/hm2_rpspi.9 ../docs/man/man9/hm2_spi.9 ../docs/man/man9/homecomp.9 ../docs/man/man9/hostmot2.9 ../docs/man/man9/hypot.9 ../docs/man/man9/ilowpass.9 ../docs/man/man9/integ.9 ../docs/man/man9/invert.9 ../docs/man/man9/joyhandle.9 ../docs/man/man9/kins.9 ../docs/man/man9/knob2float.9 ../docs/man/man9/latencybins.9 ../docs/man/man9/lcd.9 ../docs/man/man9/limit1.9 ../docs/man/man9/limit2.9 ../docs/man/man9/limit3.9 ../docs/man/man9/limit_axis.9 ../docs/man/man9/lincurve.9 ../docs/man/man9/lineardeltakins.9 ../docs/man/man9/logic.9 ../docs/man/man9/lowpass.9 ../docs/man/man9/lut5.9 ../docs/man/man9/maj3.9 ../docs/man/man9/match8.9 ../docs/man/man9/matrix_kb.9 ../docs/man/man9/max31855.9 ../docs/man/man9/maxkins.9 ../docs/man/man9/mesa_7i65.9 ../docs/man/man9/mesa_pktgyro_test.9 ../docs/man/man9/mesa_uart.9 ../docs/man/man9/message.9 ../docs/man/man9/millturn.9 ../docs/man/man9/minmax.9 ../docs/man/man9/motion.9 ../docs/man/man9/moveoff.9 ../docs/man/man9/mult2.9 ../docs/man/man9/multiclick.9 ../docs/man/man9/multiswitch.9 ../docs/man/man9/mux16.9 ../docs/man/man9/mux2.9 ../docs/man/man9/mux4.9 ../docs/man/man9/mux8.9 ../docs/man/man9/mux_generic.9 ../docs/man/man9/near.9 ../docs/man/man9/not.9 ../docs/man/man9/offset.9 ../docs/man/man9/ohmic.9 ../docs/man/man9/oneshot.9 ../docs/man/man9/opto_ac5.9 ../docs/man/man9/or2.9 ../docs/man/man9/orient.9 ../docs/man/man9/pentakins.9 ../docs/man/man9/pid.9 ../docs/man/man9/plasmac.9 ../docs/man/man9/pumakins.9 ../docs/man/man9/pwmgen.9 ../docs/man/man9/rosekins.9 ../docs/man/man9/rotatekins.9 ../docs/man/man9/sample_hold.9 ../docs/man/man9/sampler.9 ../docs/man/man9/scale.9 ../docs/man/man9/scaled_s32_sums.9 ../docs/man/man9/scarakins.9 ../docs/man/man9/select8.9 ../docs/man/man9/serport.9 ../docs/man/man9/setsserial.9 ../docs/man/man9/siggen.9 ../docs/man/man9/sim_axis_hardware.9 ../docs/man/man9/sim_encoder.9 ../docs/man/man9/sim_home_switch.9 ../docs/man/man9/sim_matrix_kb.9 ../docs/man/man9/sim_parport.9 ../docs/man/man9/sim_spindle.9 ../docs/man/man9/simple_tp.9 ../docs/man/man9/sphereprobe.9 ../docs/man/man9/spindle.9 ../docs/man/man9/spindle_monitor.9 ../docs/man/man9/sserial.9 ../docs/man/man9/stepgen.9 ../docs/man/man9/steptest.9 ../docs/man/man9/streamer.9 ../docs/man/man9/sum2.9 ../docs/man/man9/supply.9 ../docs/man/man9/thc.9 ../docs/man/man9/thcud.9 ../docs/man/man9/threads.9 ../docs/man/man9/threadtest.9 ../docs/man/man9/time.9 ../docs/man/man9/timedelay.9 ../docs/man/man9/timedelta.9 ../docs/man/man9/tof.9 ../docs/man/man9/toggle.9 ../docs/man/man9/toggle2nist.9 ../docs/man/man9/ton.9 ../docs/man/man9/tp.9 ../docs/man/man9/tpcomp.9 ../docs/man/man9/tripodkins.9 ../docs/man/man9/tristate_bit.9 ../docs/man/man9/tristate_float.9 ../docs/man/man9/trivkins.9 ../docs/man/man9/updown.9 ../docs/man/man9/userkins.9 ../docs/man/man9/watchdog.9 ../docs/man/man9/wcomp.9 ../docs/man/man9/weighted_sum.9 ../docs/man/man9/xhc_hb04_util.9 ../docs/man/man9/xor2.9 ../docs/man/man9/xyzab_tdr_kins.9 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 /usr/libexec/rpm-build/install -p -m 0644 objects/*.msg /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/msgs /usr/libexec/rpm-build/install -p -m 0755 ../scripts/realtime /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halrun /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halcmd_twopass /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/haltcl /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/simulate_probe /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/sim_pin /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../*.png ../*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../lib/hallib/* /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -m 0644 ../tcl/*.png /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc # install all the sample configs, including subdirs (tar is required on debian systems, and common on others) /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs ((cd ../configs && tar --exclude CVS --exclude .cvsignore --exclude .gitignore -cf - .) | (cd /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs && tar -xf -)) /usr/libexec/rpm-build/install -p -m 0755 ../bin/inivar ../bin/halstreamer ../bin/halsampler ../bin/panelui ../bin/mb2hal ../bin/gs2_vfd ../bin/hy_gt_vfd ../bin/svd-ps_vfd ../bin/shuttle ../bin/xhc-hb04 ../bin/sendkeys ../bin/thermistor ../bin/vfs11_vfd ../bin/classicladder ../bin/halcmd ../bin/halrmt ../bin/halmeter ../bin/halscope ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../bin/vfdb_vfd ../bin/wj200_vfd ../bin/pi500_vfd ../bin/hy_vfd ../bin/xhc-whb04b-6 ../bin/linuxcncrsh ../bin/schedrmt ../bin/linuxcnclcd ../bin/halui ../bin/linuxcncsvr ../bin/milltask ../bin/io ../bin/iov2 ../bin/genserkins ../bin/rs274 ../bin/motion-logger ../bin/tool_mmap_read ../bin/tool_watch ../bin/tooledit ../bin/ngcgui ../bin/pyngcgui ../bin/gremlin_view ../bin/halshow /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_info /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/setup_designer /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_var /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/monitor-xhc-hb04 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-plot /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/moveoff_gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/hal-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/xhc-hb04-accels /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/pyvcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/gladevcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcncmkdesktop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/update_ini /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halreport /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/libnml.so.0 ../lib/liblinuxcnchal.so.0 ../lib/liblinuxcnc.a ../lib/librs274.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 /usr/src/tmp/linuxcnc-buildroot/usr/lib64 cp --no-dereference ../lib/liblinuxcnchal.so ../lib/liblinuxcncini.so ../lib/libnml.so ../lib/libposemath.so ../lib/libpyplugin.so ../lib/librs274.so ../lib/libtooldata.so /usr/src/tmp/linuxcnc-buildroot/usr/lib64 ldconfig /usr/src/tmp/linuxcnc-buildroot/usr/lib64 /bin/bash: line 1: ldconfig: command not found make: [Makefile:734: install-kernel-indep] Error 127 (ignored) /usr/libexec/rpm-build/install -p -m 0644 ../lib/linuxcnc/canterp.so /usr/src/tmp/linuxcnc-buildroot/usr/lib64/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../include/linuxcnc.h ../include/emcIniFile.hh ../include/iniaxis.hh ../include/inijoint.hh ../include/inispindle.hh ../include/initraj.hh ../include/inihal.hh ../include/cubic.h ../include/kinematics.h ../include/switchkins.h ../include/genhexkins.h ../include/genserkins.h ../include/pentakins.h ../include/pumakins.h ../include/tc.h ../include/tc_types.h ../include/tcq.h ../include/tp.h ../include/tp_types.h ../include/spherical_arc.h ../include/blendmath.h ../include/emcmotcfg.h ../include/motion.h ../include/homing.h ../include/simple_tp.h ../include/state_tag.h ../include/usrmotintf.h ../include/axis.h ../include/canon.hh ../include/canon_position.hh ../include/emctool.h ../include/emc.hh ../include/emc_nml.hh ../include/emccfg.h ../include/emcglb.h ../include/emcpos.h ../include/emcpose.h ../include/interp_return.hh ../include/interpl.hh ../include/motion_types.h ../include/debugflags.h ../include/interp_internal.hh ../include/interp_fwd.hh ../include/interp_base.hh ../include/modal_state.hh ../include/rs274ngc.hh ../include/saicanon.hh ../include/hal.h ../include/hal_parport.h ../include/hostmot2-serial.h ../include/locmem.hh ../include/memsem.hh ../include/phantom.hh ../include/physmem.hh ../include/recvn.h ../include/rem_msg.hh ../include/sendn.h ../include/shmem.hh ../include/tcpmem.hh ../include/cms.hh ../include/cms_aup.hh ../include/cms_cfg.hh ../include/cms_dup.hh ../include/cms_srv.hh ../include/cms_up.hh ../include/cms_user.hh ../include/cms_xup.hh ../include/cmsdiag.hh ../include/tcp_opts.hh ../include/tcp_srv.hh ../include/inifile.h ../include/inifile.hh ../include/linklist.hh ../include/cmd_msg.hh ../include/nml.hh ../include/nml_mod.hh ../include/nml_oi.hh ../include/nml_srv.hh ../include/nml_type.hh ../include/nmldiag.hh ../include/nmlmsg.hh ../include/stat_msg.hh ../include/_sem.h ../include/sem.hh ../include/_shm.h ../include/shm.hh ../include/_timer.h ../include/timer.hh ../include/posemath.h ../include/gotypes.h ../include/gomath.h ../include/sincos.h ../include/rcs.hh ../include/rcs_exit.hh ../include/rcs_print.hh ../include/rcsversion.h ../include/rtapi.h ../include/rtapi_app.h ../include/rtapi_atomic.h ../include/rtapi_bitops.h ../include/rtapi_bool.h ../include/rtapi_byteorder.h ../include/rtapi_device.h ../include/rtapi_firmware.h ../include/rtapi_gfp.h ../include/rtapi_io.h ../include/rtapi_limits.h ../include/rtapi_list.h ../include/rtapi_math.h ../include/rtapi_math_i386.h ../include/rtapi_math64.h ../include/rtapi_mutex.h ../include/rtapi_parport.h ../include/rtapi_pci.h ../include/rtapi_slab.h ../include/rtapi_stdint.h ../include/rtapi_ctype.h ../include/rtapi_errno.h ../include/rtapi_string.h ../include/rtapi_vsnprintf.h /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/ cp -dR ../nc_files/3D_Chips.html ../nc_files/3D_Chips.ngc ../nc_files/3D_Chips.pdf ../nc_files/3dtest.ngc ../nc_files/M101 ../nc_files/M102.c ../nc_files/arcspiral.ngc ../nc_files/b-index.ngc ../nc_files/cds.ngc ../nc_files/comp-g1.ngc ../nc_files/comp.ngc ../nc_files/comp311.ngc ../nc_files/comp311_2.ngc ../nc_files/cone.ngc ../nc_files/daisy.ngc ../nc_files/factorial.ngc ../nc_files/filtertest-gui.py ../nc_files/filtertest.py ../nc_files/flowsnake.ngc ../nc_files/flowsnake.py ../nc_files/g20sub.ngc ../nc_files/g76.ngc ../nc_files/g881.ngc ../nc_files/g881min.ngc ../nc_files/g882.ngc ../nc_files/gcmc_lib ../nc_files/gladevcp_lib ../nc_files/gmoccapy_2_tools_with_cutter_radius_compensation.ngc ../nc_files/gridprobe.ngc ../nc_files/hole-circle.ngc ../nc_files/holecircle.py ../nc_files/increment.ngc ../nc_files/involute.py ../nc_files/lathe-g76.ngc ../nc_files/lathe_g70_71_demo.ngc ../nc_files/lathe_g7x_face_boring.ngc ../nc_files/lathe_g7x_quadrants.ngc ../nc_files/lathe_pawn.ngc ../nc_files/lathecomp.ngc ../nc_files/m250.ngc ../nc_files/m61demo.ngc ../nc_files/m6demo.ngc ../nc_files/m6remap.ngc ../nc_files/m70m72-demo.ngc ../nc_files/m73-demo.ngc ../nc_files/m75.ngc ../nc_files/m76.ngc ../nc_files/macros ../nc_files/mmount.ngc ../nc_files/nestedcall.ngc ../nc_files/ngcgui_lib ../nc_files/offsets.ngc ../nc_files/orphans ../nc_files/plasmac ../nc_files/plasmatest.ngc ../nc_files/polar.ngc ../nc_files/probe ../nc_files/probe-hole.ngc ../nc_files/remap-subroutines ../nc_files/remap_lib ../nc_files/retval.ngc ../nc_files/roparams.ngc ../nc_files/skeleton.ngc ../nc_files/smartprobe.ngc ../nc_files/spiral.ngc ../nc_files/systems.ngc ../nc_files/testm6fail.ngc ../nc_files/threading.ngc ../nc_files/tool-length-probe.ngc ../nc_files/toplevel.ngc ../nc_files/tort.ngc ../nc_files/torus.png ../nc_files/touchoff.ngc ../nc_files/useful-subroutines.ngc ../nc_files/x-trim.ngc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0755 ../nc_files/M101 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0644 ../tcl/TkLinuxCNC /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/libexec/rpm-build/install -p -m 0644 Makefile.modinc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/linuxcnc.tcl ../tcl/ngcgui.tcl ../tcl/ngcgui_app.tcl ../tcl/ngcgui_ttt.tcl ../tcl/pkgIndex.tcl ../tcl/show_errors.tcl ../tcl/tklinuxcnc.tcl ../tcl/tooledit.tcl ../tcl/twopass.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/hal.so /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/linuxcnc.so /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/pkgIndex.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/bin/cbutton.tcl ../tcl/bin/emccalib.tcl ../tcl/bin/emcdebug.tcl ../tcl/bin/emctesting.tcl ../tcl/bin/emctuning.tcl ../tcl/bin/genedit.tcl ../tcl/bin/halconfig.tcl ../tcl/bin/halshow.tcl ../tcl/bin/pickconfig.tcl ../tcl/bin/tkbackplot.tcl ../tcl/bin/popimage /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin /usr/libexec/rpm-build/install -p -m 0644 ../tcl/scripts/balloon.tcl ../tcl/scripts/emchelp.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0755 ../tcl/scripts/Set_Coordinates.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/stepconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/touchy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen2.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/gmoccapy/gmoccapy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/pncconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gremlin_view.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/popupkeyboard.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc_big.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/hal_python.xml /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs/ /usr/libexec/rpm-build/install -p -m 0644 ../share/glade/pixmaps/hicolor/22x22/actions/widget*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions/ /usr/libexec/rpm-build/install -p -m 0644 ../share/gtksourceview-4/language-specs/*.lang /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-4/language-specs/ /usr/libexec/rpm-build/install -p -m 0644 ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ for d in ../share/applications/linuxcnc.desktop ../share/applications/linuxcnc-latency.desktop ../share/applications/linuxcnc-latency-histogram.desktop ../share/applications/linuxcnc-pncconf.desktop ../share/applications/linuxcnc-stepconf.desktop ; do \ /usr/libexec/rpm-build/install -p -m 0644 $d /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ ; \ done /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/README.adoc ../docs/INSTALL.adoc ../docs/AUTHORS /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/help/asciidoc-markup_es.adoc ../docs/help/rtfaults.adoc ../docs/help/rtfaults_es.adoc ../docs/help/tklinuxcnc.adoc /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/etc/axis_light_background /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/README /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/README.axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.3/src' + popd ~/RPM/BUILD/linuxcnc-2.9.3 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/lib/udev/rules.d + cp debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules /usr/src/tmp/linuxcnc-buildroot/usr/lib/udev/rules.d + desktop-file-install --dir /usr/src/tmp/linuxcnc-buildroot/usr/share/applications --remove-key=Version --remove-category=X-CNC --remove-category=Utility /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc.desktop + cat + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps + convert linuxcncicon.png -resize 16x16 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps/linuxcncicon.png WARNING: The convert command is deprecated in IMv7, use "magick" instead of "convert" or "magick convert" + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps + convert linuxcncicon.png -resize 32x32 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps/linuxcncicon.png WARNING: The convert command is deprecated in IMv7, use "magick" instead of "convert" or "magick convert" + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps + convert linuxcncicon.png -resize 48x48 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps/linuxcncicon.png WARNING: The convert command is deprecated in IMv7, use "magick" instead of "convert" or "magick convert" + pushd /usr/src/tmp/linuxcnc-buildroot/usr/share/man ~/tmp/linuxcnc-buildroot/usr/share/man ~/RPM/BUILD/linuxcnc-2.9.3 ++ find -name '*.?' + xz ./man9/xyzab_tdr_kins.9 ./man9/xor2.9 ./man9/xhc_hb04_util.9 ./man9/weighted_sum.9 ./man9/wcomp.9 ./man9/watchdog.9 ./man9/userkins.9 ./man9/updown.9 ./man9/trivkins.9 ./man9/tristate_float.9 ./man9/tristate_bit.9 ./man9/tripodkins.9 ./man9/tpcomp.9 ./man9/tp.9 ./man9/ton.9 ./man9/toggle2nist.9 ./man9/toggle.9 ./man9/tof.9 ./man9/timedelta.9 ./man9/timedelay.9 ./man9/time.9 ./man9/threadtest.9 ./man9/threads.9 ./man9/thcud.9 ./man9/thc.9 ./man9/supply.9 ./man9/sum2.9 ./man9/streamer.9 ./man9/steptest.9 ./man9/stepgen.9 ./man9/sserial.9 ./man9/spindle_monitor.9 ./man9/spindle.9 ./man9/sphereprobe.9 ./man9/simple_tp.9 ./man9/sim_spindle.9 ./man9/sim_parport.9 ./man9/sim_matrix_kb.9 ./man9/sim_home_switch.9 ./man9/sim_encoder.9 ./man9/sim_axis_hardware.9 ./man9/siggen.9 ./man9/setsserial.9 ./man9/serport.9 ./man9/select8.9 ./man9/scarakins.9 ./man9/scaled_s32_sums.9 ./man9/scale.9 ./man9/sampler.9 ./man9/sample_hold.9 ./man9/rotatekins.9 ./man9/rosekins.9 ./man9/pwmgen.9 ./man9/pumakins.9 ./man9/plasmac.9 ./man9/pid.9 ./man9/pentakins.9 ./man9/orient.9 ./man9/or2.9 ./man9/opto_ac5.9 ./man9/oneshot.9 ./man9/ohmic.9 ./man9/offset.9 ./man9/not.9 ./man9/near.9 ./man9/mux_generic.9 ./man9/mux8.9 ./man9/mux4.9 ./man9/mux2.9 ./man9/mux16.9 ./man9/multiswitch.9 ./man9/multiclick.9 ./man9/mult2.9 ./man9/moveoff.9 ./man9/motion.9 ./man9/minmax.9 ./man9/millturn.9 ./man9/message.9 ./man9/mesa_uart.9 ./man9/mesa_pktgyro_test.9 ./man9/mesa_7i65.9 ./man9/maxkins.9 ./man9/max31855.9 ./man9/matrix_kb.9 ./man9/match8.9 ./man9/maj3.9 ./man9/lut5.9 ./man9/lowpass.9 ./man9/logic.9 ./man9/lineardeltakins.9 ./man9/lincurve.9 ./man9/limit_axis.9 ./man9/limit3.9 ./man9/limit2.9 ./man9/limit1.9 ./man9/lcd.9 ./man9/latencybins.9 ./man9/knob2float.9 ./man9/kins.9 ./man9/joyhandle.9 ./man9/invert.9 ./man9/integ.9 ./man9/ilowpass.9 ./man9/hypot.9 ./man9/hostmot2.9 ./man9/homecomp.9 ./man9/hm2_spi.9 ./man9/hm2_rpspi.9 ./man9/hm2_pci.9 ./man9/hm2_eth.9 ./man9/hm2_7i90.9 ./man9/hm2_7i43.9 ./man9/histobins.9 ./man9/hal_parport.9 ./man9/hal_bb_gpio.9 ./man9/gray2bin.9 ./man9/gladevcp.9 ./man9/gentrivkins.9 ./man9/genserkins.9 ./man9/genhexkins.9 ./man9/gearchange.9 ./man9/gantrykins.9 ./man9/gantry.9 ./man9/flipflop.9 ./man9/filter_kalman.9 ./man9/feedcomp.9 ./man9/estop_latch.9 ./man9/eoffset_per_angle.9 ./man9/enum.9 ./man9/encoder_ratio.9 ./man9/encoder.9 ./man9/edge.9 ./man9/div2.9 ./man9/differential.9 ./man9/demux.9 ./man9/debounce.9 ./man9/deadzone.9 ./man9/ddt.9 ./man9/dbounce.9 ./man9/counter.9 ./man9/corexy_by_hal.9 ./man9/conv_u32_s32.9 ./man9/conv_u32_float.9 ./man9/conv_u32_bit.9 ./man9/conv_s32_u32.9 ./man9/conv_s32_float.9 ./man9/conv_s32_bit.9 ./man9/conv_float_u32.9 ./man9/conv_float_s32.9 ./man9/conv_bit_u32.9 ./man9/conv_bit_s32.9 ./man9/conv_bit_float.9 ./man9/constant.9 ./man9/comp.9 ./man9/classicladder.9 ./man9/clarkeinv.9 ./man9/clarke3.9 ./man9/clarke2.9 ./man9/charge_pump.9 ./man9/carousel.9 ./man9/blend.9 ./man9/bldc.9 ./man9/bitwise.9 ./man9/bitslice.9 ./man9/biquad.9 ./man9/bin2gray.9 ./man9/axistest.9 ./man9/axis.9 ./man9/at_pid.9 ./man9/anglejog.9 ./man9/and2.9 ./man9/abs_s32.9 ./man9/abs.9 ./man1/xyzbc-trt-gui.1 ./man1/xyzac-trt-gui.1 ./man1/xyzab-tdr-gui.1 ./man1/xhc-whb04b-6.1 ./man1/xhc-hb04.1 ./man1/xhc-hb04-accels.1 ./man1/wj200_vfd.1 ./man1/vfs11_vfd.1 ./man1/vfdb_vfd.1 ./man1/update_ini.1 ./man1/touchy.1 ./man1/tooledit.1 ./man1/tool_watch.1 ./man1/tool_mmap_read.1 ./man1/thermistor.1 ./man1/teach-in.1 ./man1/svd-ps_vfd.1 ./man1/stepconf.1 ./man1/simulate_probe.1 ./man1/sim_pin.1 ./man1/sim-torch.1 ./man1/shuttle.1 ./man1/setup_designer.1 ./man1/sendkeys.1 ./man1/scorbot-er-3.1 ./man1/schedrmt.1 ./man1/scaragui.1 ./man1/rtapi_app.1 ./man1/rs274.1 ./man1/rotarydelta.1 ./man1/qtvcp.1 ./man1/qtplasmac_gcode.1 ./man1/qtplasmac-setup.1 ./man1/qtplasmac-plasmac2qt.1 ./man1/qtplasmac-materials.1 ./man1/qtplasmac-cfg2prefs.1 ./man1/pyvcp_demo.1 ./man1/pyvcp.1 ./man1/pyui.1 ./man1/pyngcgui.1 ./man1/pumagui.1 ./man1/puma560gui.1 ./man1/pncconf.1 ./man1/pmx485.1 ./man1/pmx485-test.1 ./man1/pi500_vfd.1 ./man1/panelui.1 ./man1/ngcgui.1 ./man1/mqtt-publisher.1 ./man1/moveoff_gui.1 ./man1/motion-logger.1 ./man1/monitor-xhc-hb04.1 ./man1/modcompile.1 ./man1/mitsub_vfd.1 ./man1/millturn.1 ./man1/milltask.1 ./man1/melfagui.1 ./man1/mdro.1 ./man1/mdi.1 ./man1/mb2hal.1 ./man1/max5gui.1 ./man1/maho600gui.1 ./man1/linuxcnctop.1 ./man1/linuxcncsvr.1 ./man1/linuxcncrsh.1 ./man1/linuxcncmkdesktop.1 ./man1/linuxcnclcd.1 ./man1/linuxcnc_var.1 ./man1/linuxcnc_module_helper.1 ./man1/linuxcnc_info.1 ./man1/linuxcnc.1 ./man1/lineardelta.1 ./man1/latency-test.1 ./man1/latency-plot.1 ./man1/latency-histogram.1 ./man1/iov2.1 ./man1/iocontrol.1 ./man1/io.1 ./man1/inivar.1 ./man1/image-to-gcode.1 ./man1/hy_vfd.1 ./man1/hy_gt_vfd.1 ./man1/hexagui.1 ./man1/hbmgui.1 ./man1/halui.1 ./man1/haltcl.1 ./man1/halstreamer.1 ./man1/halshow.1 ./man1/halscope.1 ./man1/halsampler.1 ./man1/halrun.1 ./man1/halrmt.1 ./man1/halreport.1 ./man1/halmeter.1 ./man1/halcompile.1 ./man1/halcmd_twopass.1 ./man1/halcmd.1 ./man1/hal_manualtoolchange.1 ./man1/hal_input.1 ./man1/hal-histogram.1 ./man1/gscreen.1 ./man1/gs2_vfd.1 ./man1/gremlin_view.1 ./man1/gmoccapy.1 ./man1/gladevcp_demo.1 ./man1/gladevcp.1 ./man1/emccalib.1 ./man1/elbpcom.1 ./man1/debuglevel.1 ./man1/axis.1 ./man1/axis-remote.1 ./man1/5axisgui.1 + popd ~/RPM/BUILD/linuxcnc-2.9.3 + rm /usr/src/tmp/linuxcnc-buildroot/usr/lib64/liblinuxcnc.a + /usr/lib/rpm/find-lang linuxcnc gmoccapy --output=linuxcnc.lang + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/linuxcnc-buildroot (auto) mode of './usr/bin/rtapi_app' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) mode of './usr/bin/linuxcnc_module_helper' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) Verifying and fixing files in /usr/src/tmp/linuxcnc-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) Checking contents of files in /usr/src/tmp/linuxcnc-buildroot/ (default) Compressing files in /usr/src/tmp/linuxcnc-buildroot (auto) removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' Adjusting library links in /usr/src/tmp/linuxcnc-buildroot ./lib: (from :0) ./usr/lib64: (from :0) liblinuxcncini.so.0 -> liblinuxcncini.so.0 libposemath.so.0 -> libposemath.so.0 libnml.so.0 -> libnml.so.0 liblinuxcnchal.so.0 -> liblinuxcnchal.so.0 librs274.so.0 -> librs274.so.0 libpyplugin.so.0 -> libpyplugin.so.0 libtooldata.so.0 -> libtooldata.so.0 ./usr/lib64/python3/site-packages/qtvcp/lib: (from :0) ./usr/lib: (from :0) Verifying ELF objects in /usr/src/tmp/linuxcnc-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=relaxed) verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib64/linuxcnc: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_XOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_BOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_UOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Yv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_PROBE_VALUEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_MOTION_CONTROL_MODEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_SPEEDi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z16SET_BLOCK_DELETEb verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z16GET_BLOCK_DELETEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z14IO_PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Av verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z15SPINDLE_RETRACTv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Cv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Zv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_PLANEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Wv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z10NURBS_FEEDiSt6vectorI13CONTROL_POINTSaIS0_EEj verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TOOL_SLOTv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z21GET_EXTERNAL_TC_FAULTv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z10UPDATE_TAG8StateTag verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z15RELOAD_TOOLDATAv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23CLEAR_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z10CLAMP_AXIS10CANON_AXIS verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z11LOCK_ROTARYii verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23SET_PARAMETER_FILE_NAMEPKc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z4WAITiiid verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Av verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_VOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z12START_CHANGEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Xv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_COFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Yv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_TRAVERSE_RATEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z25SET_OPTIONAL_PROGRAM_STOPb verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z17GET_EXTERNAL_MISTv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z24SPINDLE_RETRACT_TRAVERSEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Bv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z3LOGPc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_ANALOG_INPUTid verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z27GET_EXTERNAL_OFFSET_APPLIEDv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_FEED_HOLD_ENABLEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PARAMETER_FILE_NAMEPci verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Uv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_OFFSETSv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22SET_NAIVECAM_TOLERANCEd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z11PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_LENGTH_UNITSv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z9RIGID_TAPidddd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z31STOP_CUTTER_RADIUS_COMPENSATIONv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z8LOGCLOSEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z13SET_FEED_MODEii verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_FEED_OVERRIDE_ENABLEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20CLEAR_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_AXIS_MASKv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Vv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z13UNLOCK_ROTARYii verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z14SET_G5X_OFFSETiddddddddd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23SET_MOTION_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z6FINISHv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_FEED_RATEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_FLOODv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z8ON_RESETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z17SET_TRAVERSE_RATEd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z14SET_G92_OFFSETddddddddd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Zv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z31GET_EXTERNAL_SELECTED_TOOL_SLOTv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_DIGITAL_INPUTii verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z16SET_SPINDLE_MODEid verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z15SET_XY_ROTATIONd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z7LOGOPENPc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_ANGLE_UNITSv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z46GET_EXTERNAL_MOTION_CONTROL_NAIVECAM_TOLERANCEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_SPINDLEi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Wv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z36GET_EXTERNAL_SPINDLE_OVERRIDE_ENABLEi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32START_CUTTER_RADIUS_COMPENSATIONi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Vv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z18SET_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_YOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z30SET_CUTTER_RADIUS_COMPENSATIONd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Cv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_WOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z9LOGAPPENDPc verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z17DISABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: USER_DEFINED_FUNCTION verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _task verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20SET_AUX_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_AOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_QUEUE_EMPTYv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PROBE_TRIPPED_VALUEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20ENABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: builtin_modules verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z18CHANGE_TOOL_NUMBERi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_TOOL_TABLEi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z21DISABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22USE_TOOL_LENGTH_OFFSET7EmcPose verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_ZOFFSETv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Bv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z21SET_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z16ENABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20SET_TOOL_TABLE_ENTRYii7EmcPosedddi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Xv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z37GET_EXTERNAL_MOTION_CONTROL_TOLERANCEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_ADAPTIVE_FEED_ENABLEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z25GET_OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Uv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z20USE_NO_SPINDLE_FORCEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z11CANON_ERRORPKcz verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z28WAIT_SPINDLE_ORIENT_COMPLETEid verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TC_REASONv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_LENGTH_UNIT_TYPEv verify-elf: WARNING: ./usr/lib64/librs274.so.0: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXDestroyContext verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXQueryServerString verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glDeleteLists verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glDrawBuffer verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXQueryExtension verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXMakeCurrent verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glFlush verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glGetString verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXCreateContext verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXUseXFont verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glGenLists verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXChooseVisual verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXGetConfig verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glViewport verify-elf: WARNING: ./usr/lib64/python3/site-packages/_togl.so: undefined symbol: glXSwapBuffers verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_destroy verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hm2_get_sserial verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_shmem_base verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_del_funct_from_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_detach verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_writable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_write verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_maxdepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitch verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_stop_threads verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpRunCycle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_allhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetMotionType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetCycleTime verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetTermCond verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsForward verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_index_enable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetRunDir verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: write_homing_out_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_sequence verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpActiveDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotData verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetSpindleSync verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_synchronized verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_cancel_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsInverse verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitchable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecTag verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_needs_unlock_first verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_is_active verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVlimit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddCircle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetDout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpIsDone verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpPause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpCreate verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddRigidTap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpResume verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homeMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_unhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tcqFull verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_idle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAbort verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_home_joint verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: read_homing_in_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpQueueDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddLine verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_at_index_search_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homing_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpClear verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_get_pktuart verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_tram_add_bspi_frame verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_allocate_bspi_tram verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_clear_fifo verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_setup_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_write_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_set_read_function verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_free verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_alias verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_task_self verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_next_lower verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_vsnprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_pause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_start verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_clock_set_period verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_highest verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print Splitting links to aliased files under /{,s}bin in /usr/src/tmp/linuxcnc-buildroot Bytecompiling python3 modules in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/preferences.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/bar_plugin.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vismach.py Can't list '/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages' Bytecompiling python3 modules with optimization in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -O /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vismach.py Can't list '/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages' compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py Bytecompiling python3 modules with optimization-2 in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -OO /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/preferences.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/bar_plugin.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vismach.py Can't list '/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages' Hardlinking identical .pyc and .opt-?.pyc files './usr/lib64/python3/site-packages/__pycache__/bitfile.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/bitfile.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/bwidget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/bwidget.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/glnav.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/glnav.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/gremlin_view.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/gremlin_view.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/hal.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/hal.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/hal_glib.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/hal_glib.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/hershey.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/hershey.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/nf.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/nf.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/popupkeyboard.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/popupkeyboard.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/propertywindow.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/pyhal.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/pyhal.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/pyngcgui.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/pyngcgui.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/__pycache__/tooldb.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/tooldb.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/vcpparse.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/vcpparse.cpython-312.pyc' './usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/core.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/led.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.pyc' './usr/lib64/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/block.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/block.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/circle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/circle.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/sector.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/sector.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/slot.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/slot.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/star.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/star.cpython-312.pyc' './usr/lib64/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/data.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/tests.cpython-312.pyc' './usr/lib64/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/master.cpython-312.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/pyui/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/pyui/__pycache__/widgets.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/core.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.pyc' './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/interpret.cpython-312.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/options.cpython-312.pyc' './usr/lib64/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.pyc' './usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/__init__.cpython-312.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/listing.cpython-312.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/preferences.cpython-312.pyc' './usr/lib64/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib64/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' Processing files: linuxcnc-2.9.3-alt3.20240830 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.fdCcUE find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py provides python3(involute)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py provides python3(holecircle)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py provides python3(flowsnake)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py provides python3(filtertest)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py provides python3(screens.x1mill.x1mill_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py provides python3(screens.woodpecker.woodpecker_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py provides python3(screens.tester.tester_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py provides python3(screens.qttouchy.qttouchy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py provides python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py provides python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py provides python3(screens.qtplasmac.qtplasmac_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py provides python3(screens.qtplasmac.languages.qtplasmac)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py provides python3(screens.qtlathe.qtlathe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py provides python3(screens.qtdragon_hd.qtdragon_hd_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py provides python3(screens.qtdragon.qtdragon_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py provides python3(screens.qtaxis.qtaxis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py provides python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py provides python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py provides python3(screens.qt_cnc.qt_cnc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py provides python3(screens.blender.blender_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py provides python3(panels.vismach_scara.vismach_scara_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py provides python3(panels.vismach_router_atc.vismach_router_atc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py provides python3(panels.vismach_millturn.vismach_millturn_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py provides python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py provides python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py provides python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py provides python3(panels.versaprobe.versaprobe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py provides python3(panels.tool_dialog.tool_dialog_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py provides python3(panels.test_probe.test_probe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py provides python3(panels.test_panel.test_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py provides python3(panels.test_led.test_led_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py provides python3(panels.test_dial.test_dial_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py provides python3(panels.test_button.test_button_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py provides python3(panels.spindle_belts.spindle_belts_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py provides python3(panels.sim_panel.sim_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py provides python3(panels.qtplasmac_sim.qtplasmac_sim_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py provides python3(panels.copy.copy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py provides python3(panels.cam_align.cam_align_handler)(under non-std path /usr/share/qtvcp) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.Xrjsup find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gcode.so: underlinked libraries: /lib64/libpython3.12.so.1.0 lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/linuxcnc.so: underlinked libraries: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/liblinuxcnchal.so.0 python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so :550: SyntaxWarning: invalid escape sequence '\.' :552: SyntaxWarning: invalid escape sequence '\.' :289: SyntaxWarning: invalid escape sequence '\ ' :295: SyntaxWarning: invalid escape sequence '\ ' :299: SyntaxWarning: invalid escape sequence '\ ' :303: SyntaxWarning: invalid escape sequence '\ ' :306: SyntaxWarning: invalid escape sequence '\ ' :310: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :320: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\P' :446: SyntaxWarning: invalid escape sequence '\M' :17: SyntaxWarning: invalid escape sequence '\s' :181: SyntaxWarning: invalid escape sequence '\s' :193: SyntaxWarning: invalid escape sequence '\[' :199: SyntaxWarning: invalid escape sequence '\[' :218: SyntaxWarning: invalid escape sequence '\[' :236: SyntaxWarning: invalid escape sequence '\[' :267: SyntaxWarning: invalid escape sequence '\w' :270: SyntaxWarning: invalid escape sequence '\w' :274: SyntaxWarning: invalid escape sequence '\w' :289: SyntaxWarning: invalid escape sequence '\d' :301: SyntaxWarning: invalid escape sequence '\[' :309: SyntaxWarning: invalid escape sequence '\s' :341: SyntaxWarning: invalid escape sequence '\[' :342: SyntaxWarning: invalid escape sequence '\[' :388: SyntaxWarning: invalid escape sequence '\[' :390: SyntaxWarning: invalid escape sequence '\[' :394: SyntaxWarning: invalid escape sequence '\[' :395: SyntaxWarning: invalid escape sequence '\[' :396: SyntaxWarning: invalid escape sequence '\.' :398: SyntaxWarning: invalid escape sequence '\[' :487: SyntaxWarning: invalid escape sequence '\[' :498: SyntaxWarning: invalid escape sequence '\s' :769: SyntaxWarning: invalid escape sequence '\d' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\P' :319: SyntaxWarning: invalid escape sequence '\M' :2207: SyntaxWarning: invalid escape sequence '\(' :2208: SyntaxWarning: invalid escape sequence '\(' :2209: SyntaxWarning: invalid escape sequence '\(' :170: SyntaxWarning: invalid escape sequence '\d' :171: SyntaxWarning: invalid escape sequence '\d' :174: SyntaxWarning: invalid escape sequence '\d' :175: SyntaxWarning: invalid escape sequence '\d' :176: SyntaxWarning: invalid escape sequence '\d' :178: SyntaxWarning: invalid escape sequence '\d' :181: SyntaxWarning: invalid escape sequence '\d' :154: SyntaxWarning: invalid escape sequence '\d' :6109: SyntaxWarning: invalid escape sequence '\[' :49: SyntaxWarning: invalid escape sequence '\d' :51: SyntaxWarning: invalid escape sequence '\d' :30: SyntaxWarning: invalid escape sequence '\.' :32: SyntaxWarning: invalid escape sequence '\.' py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "atexit" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "errno" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "_thread" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "gcode" lines:[59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.OpenGLTk" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.interpret" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hershey" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "propertywindow" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.options" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "nf" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "bwidget" lines:[69] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "linuxcnc" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "glnav" lines:[72] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hal" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "subprocess" lines:[[1113], [[3962]], [4034]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "webbrowser" lines:[[[2089]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "vcpparse" lines:[[[3926]], [[[4049]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "_thread" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "linuxcnc" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "time" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "rs274.options" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: skipping "sys" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "hal" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.makepins" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.gladebuilder" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.core" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal_glib" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "sys" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "atexit" lines:[42] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "linuxcnc" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "time" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "qtvcp" lines:[[5803]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.makepins" lines:[[5825]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.combi_dro" lines:[[5826]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gmoccapy" lines:[[5827, 5828, 5829, 5830, 5831, 5832], [[5834]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gremlin_view: "gremlin_view" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "qtvcp" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal" lines:[92] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "errno" lines:[93] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gladevcp.makepins" lines:[94] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "atexit" lines:[96] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "time" lines:[97, 98] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal_glib" lines:[99] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "linuxcnc" lines:[197] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gscreen" lines:[198, 199, 200, 201] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gi.repository" lines:[[119], [131], [141]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "distro" lines:[[[165]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "inspect" lines:[[[889]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "collections" lines:[[[890]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "subprocess" lines:[[[3941]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "linux_event" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "hal" lines:[22, 28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "nf" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "rs274.options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "sys" lines:[22, 402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "time" lines:[402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "hal" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: skipping "sys" lines:[12] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.author" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.options" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "PIL" lines:[[29], [[502]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "Image" lines:[[[31]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter" lines:[[499], [[757]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "pickle" lines:[[506]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "nf" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "ImageTk" lines:[[[[504]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter.filedialog" lines:[[[758]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "vismach" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "lineardeltakins" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "linuxcnc" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "rs274.options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "tkinter" lines:[[122]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "_tkinter" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "vismach" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "hal" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "getopt" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "sys" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/modcompile: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "time" lines:[31] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "hal" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "linuxcnc" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "paho.mqtt.client" lines:[[[[53]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "optparse" lines:[[[118]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "time" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial.tools.list_ports" lines:[[32]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "errno" lines:[38] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "copy" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "multifilebuilder" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "touchy" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "pncconf" lines:[54, 55, 56, 57, 58, 59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "hal" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "vismach" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "hal" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyngcgui: "pyngcgui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyui: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: skipping "sys" lines:[37] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "vcpparse" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "hal" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: "json" lines:[[[[[[336]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "tkinter" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtCore" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtGui" lines:[[39]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtWidgets" lines:[[40]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebEngineWidgets" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebKitWidgets" lines:[[[[18]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp" lines:[[[117]], [533]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "linuxcnc" lines:[[[[152]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.lib" lines:[[[[[329]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.core" lines:[[[450]], [553]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "rotarydeltakins" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: skipping "sys" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "vismach" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: "hal" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "hal" lines:[35, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "errno" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "time" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "multifilebuilder" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "stepconf" lines:[116, 117, 118] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "defusedexpat" lines:[[47]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "xml.parsers" lines:[[[49]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "sys" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "atexit" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "time" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "linuxcnc" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "touchy" lines:[62, 63, 64, 65, 66, 67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "subprocess" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "datetime" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "vismach" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "hal" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "linuxcnc" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "scipy.interpolate" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bitfile.py: "sys" lines:[[112]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/bwidget.py: skipping "sys" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/__init__.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/__init__.py: "gladevcp.hal_pythonplugin" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/__init__.py: "importlib" lines:[[4]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/calculatorwidget.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/combi_dro.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/combi_dro.py: "linuxcnc" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/combi_dro.py: "hal_glib" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py: "gladevcp.gtk_action" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py: "linuxcnc" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py: "qtvcp" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: "hal" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: "gladevcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: skipping "sys" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: skipping "time" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: skipping "atexit" lines:[829] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: "subprocess" lines:[[[601], [617]], [[838]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gtk_action.py: "qtvcp.core" lines:[[915]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.core" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_bar.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_bar.py: "gladevcp.hal_widgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_dial.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_dial.py: "gladevcp.hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: skipping "atexit" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_actions" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py: "subprocess" lines:[[[37]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_graph.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_graph.py: "hal_widgets" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_graph.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "linuxcnc" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "gremlin" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "rs274.glcanon" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "gcode" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "hal_glib" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "hal_actions" lines:[[41]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "gladevcp.hal_actions" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py: "subprocess" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin_plus.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gremlin_view" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gladevcp" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_lightbutton.py: "hal_widgets" lines:[[46]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_lightbutton.py: "gladevcp.hal_widgets" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_glib" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.core" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_actions" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_actions" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_meter.py: "hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_meter.py: "gladevcp.hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pyngcgui.py: "pyngcgui" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pyngcgui.py: "gladevcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_widgets" lines:[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.status_label" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.state_label" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.led" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.calculatorwidget" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.tooledit_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.drowidget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.iconview" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.combi_dro" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetwidget" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetpage_widget" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_bar" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_meter" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_graph" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_lightbutton" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.overridewidget" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.jogwheel" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.speedcontrol" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_dial" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_actions" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_filechooser" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_sourceview" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_mdihistory" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.macro_widget" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_pyngcgui" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin_plus" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: "linuxcnc" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: "hal_glib" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_widgets" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_actions" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_filechooser" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: "os" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py: "tempfile" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_widgets.py: "hal" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/iconview.py: "qtvcp" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/jogwheel.py: "hal" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/jogwheel.py: "hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/jogwheel.py: "gladevcp.hal_widgets" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/led.py: "hal_widgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/led.py: "gladevcp.hal_widgets" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py: "hal_actions" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_actions" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py: "gladevcp.gladebuilder" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py: "gladevcp.hal_widgets" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py: "gladevcp.led" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetpage_widget.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetpage_widget.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetpage_widget.py: "hal_glib" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetwidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetwidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/overridewidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/overridewidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py: "gladevcp.gladebuilder" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_widgets" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_actions" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/speedcontrol.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/speedcontrol.py: "hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/speedcontrol.py: "gladevcp.hal_widgets" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/state_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/state_label.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/state_label.py: "hal_widgets" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/state_label.py: "gladevcp.hal_widgets" lines:[[26]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/status_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/status_label.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/status_label.py: "hal_widgets" lines:[[23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/status_label.py: "gladevcp.hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/tooledit_widget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/tooledit_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/xembed.py: "Xlib" lines:[[16], [73]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/xembed.py: "Xlib.xobject" lines:[[17], [74]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/xembed.py: "Xlib.protocol" lines:[[72]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp_makepins.py: "gladevcp.makepins" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py: skipping "itertools" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py: "gi" lines:[[9]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py: "gi.repository" lines:[[12, 13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/glnav.py: "cairo" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/dialogs.py: "gladevcp" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/getiniinfo.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/getiniinfo.py: "qtvcp" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/notification.py: "gmoccapy" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/notification.py: "icon_theme_helper" lines:[[[40]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/player.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/player.py: "gi.repository" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: skipping "sys" lines:[46] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: "glnav" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: "rs274.interpret" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: "linuxcnc" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: "gcode" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: skipping "time" lines:[68] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: skipping "_thread" lines:[74] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: "Xlib" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py: "Xlib.display" lines:[[56]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py: skipping "sys" lines:[80] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py: "gladevcp.hal_actions" lines:[81] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py: "linuxcnc" lines:[82] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py: skipping "time" lines:[83] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py: skipping "glib" lines:[87] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py: "getopt" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal.py: "_hal" lines:[30, 31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal_glib.py: "_hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal_glib.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal_glib.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hershey.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linux_event.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linuxcnc_util.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linuxcnc_util.py: skipping "sys" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/linuxcnc_util.py: skipping "time" lines:[8] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/nf.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/block.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/bolt_circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/ellipse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/gusset.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/line.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/polygon.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/rectangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/sector.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/slot.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/star.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/plasmac/triangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_HAL.py: "configparser" lines:[[[1978]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_INI.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/private_data.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/tests.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/popupkeyboard.py: "linuxcnc" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/popupkeyboard.py: skipping "sys" lines:[57] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/propertywindow.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: skipping "sys" lines:[62] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "linuxcnc" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "hal" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "gladevcp" lines:[74] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "gladevcp.hal_filechooser" lines:[[212]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "gi.repository.GdkPixbuf" lines:[[456]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[[[[2987]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py: "glib" lines:[[[[2988]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/__init__.py: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/commands.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/commands.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py: "hal" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py: "pyui" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py: "pyui" lines:[[[35]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py: "zmq" lines:[[[[[[94]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/panelui_validate.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/widgets.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/widgets.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: skipping "sys" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: "hal" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: "bwidget" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: skipping "time" lines:[55] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: "vcpparse" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: "xml.dom.minidom" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: "xml.parsers.expat" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyvcp_widgets.py: "rs274.options" lines:[[[1745]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: skipping "_thread" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "glnav" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "rs274" lines:[31, 32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "gcode" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "qtvcp.widgets.fake_status" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "PyQt5.QtOpenGL" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py: "OpenGL" lines:[[22, 23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "qtvcp.qt_pstat" lines:[288] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "qtvcp.qt_action" lines:[302] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "qtvcp.qt_tstat" lines:[318] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp.core" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py: "gi" lines:[[31], [279]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py: "gi.repository" lines:[[33], [280]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py: "espeak" lines:[[54]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py: "queue" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py: "distro" lines:[[[[98]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/aux_program_loader.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/aux_program_loader.py: skipping "time" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/aux_program_loader.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/colored_formatter.py: "logging" lines:[[116]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "atexit" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "linuxcnc" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "atexit" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "linuxcnc" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "atexit" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.qt_makegui" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.lib" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/keybindings.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp.core" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/machine_log.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py: "hal" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py: "sys" lines:[[189]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/message.py: "PyQt5.QtCore" lines:[[190]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.lib" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/notify.py: "qtvcp" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "gladevcp.hal_filechooser" lines:[[879]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "popplerqt5" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/mill_xyz.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: skipping "itertools" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi.repository" lines:[[13, 14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "cairo" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: "qtvcp.lib.qt_vismach.primitives" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: skipping "plasmac" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.lib.qtplasmac" lines:[29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py: "cv2" lines:[[[270]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: skipping "sys" lines:[97] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter" lines:[[101]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.filedialog" lines:[[102]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.messagebox" lines:[[103]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "Tkinter" lines:[[105]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFileDialog" lines:[[106]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkMessageBox" lines:[[107]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "psyco" lines:[[114]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFont" lines:[[[6408]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.font" lines:[[[[6411]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py: "dbus.mainloop.pyqt5" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py: "sys" lines:[[255]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py: "PyQt5.QtCore" lines:[[256]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.qt_makegui" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.lib.aux_program_loader" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "qtvcp" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "hal_glib" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/datetime.py: skipping "time" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/ext/table.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/writer.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.lib.writer.ext" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/xembed.py: "Xlib" lines:[[[26]], [51]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.xobject" lines:[[[27]], [52]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.protocol" lines:[[50]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/logger.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/logger.py: "qtvcp.lib.colored_formatter" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button_round" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.richtext_selector" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.basic_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.camview_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.container_widgets" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.detach_tabs" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.gcode_graphics" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.hal_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.jog_increments" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.joypad" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.led_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.nurbs_editor" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.overlay_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.simplewidgets_plugin" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.led_plugin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.hal_label_plugin" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.detach_tabs_plugin" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_progress_bar_plugin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.joypad_plugin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.nurbs_editor_plugin" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.web_widget_plugin" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.container_plugin" lines:[37, 38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.graphics_plugin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.widgets_plugin" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_led_plugin" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_label_plugin" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_label_plugin" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.actionbutton_plugin" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.dialog_plugin" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.overlay_plugin" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_slider_plugin" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_adjustment_bar_plugin" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.screenoptions_plugin" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.jogincrements_plugin" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.camview_plugin" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.toolbutton_plugin" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.versa_probe_plugin" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.basic_probe_plugin" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.tab_widget_plugin" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.virtualkeyboard_plugin" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_gauge_plugin" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.bar_plugin" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.round_gauge" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.round_progress" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.screen_options" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.simple_widgets" lines:[5, 6, 7, 8, 9, 10, 11, 12, 13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_output" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_input" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.xembed" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.radio_axis_selector" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.axis_tool_button" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.offset_tool_button" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.file_manager" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.image_switcher" lines:[21, 22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.machine_log" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.state_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.state_led" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.adjustment_bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.richtext_selector" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.status_label" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.status_slider" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.tab_widget" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.system_tool_button" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.action_tool_button" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.versa_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.virtualkeyboard" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.web_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.dro_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_line" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_history" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_touchy" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.gcode_editor" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.geditor" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.status_stacked" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.widget_switcher" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.origin_offsetview" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.tool_offsetview" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.macro_widget" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: "linuxcnc" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: skipping "sys" lines:[1054] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: skipping "atexit" lines:[1055] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: "subprocess" lines:[[[650], [663]], [[1064]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: "shutil" lines:[[[651]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[[1144]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_istat.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_istat.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py: "importlib" lines:[[[[[190]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makegui.py: "resources" lines:[[[[[[191]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.screen_options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_pstat.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_pstat.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_pstat.py: "importlib" lines:[[[437]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qtvcp_handler.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qtvcp_handler.py: "qtvcp" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.simple_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.lib.aux_program_loader" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "sys" lines:[[1580]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py: "PyQt5.QtWidgets" lines:[[1581]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button_round.py: "qtvcp.widgets.action_button" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button_round.py: "sys" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button_round.py: "PyQt5.QtWidgets" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py: "sys" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py: "PyQt5.QtWidgets" lines:[[83]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.lib.aux_program_loader" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "sys" lines:[[390]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "PyQt5.QtWidgets" lines:[[391]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "hal" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "sys" lines:[[292]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "PyQt5.QtWidgets" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp.widgets.widget_baseclass" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/bar.py: "hal" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/bar.py: "PyQt5.QtCore" lines:[[7], [[10]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.dialogMixin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtWidgets" lines:[[459]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtCore" lines:[[460]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtGui" lines:[[461]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/calculator.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/calculator.py: "qtvcp.core" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/calculator.py: "sys" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py: skipping "_thread" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.widgets.widget_baseclass" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.core" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py: "cv2" lines:[[45]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py: "sys" lines:[[572]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/detach_tabs.py: "sys" lines:[[359]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp.widgets.widget_baseclass" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.widget_baseclass" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.origin_offsetview" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.tool_offsetview" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.macro_widget" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.versa_probe" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.entry_widget" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.virtualkeyboard" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.calculator" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.machine_log" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.lib.notify" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.dialogMixin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.camview_widget" lines:[[[984]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "sys" lines:[[1925]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py: "PyQt5.QtWidgets" lines:[[1926]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py: "sys" lines:[[326]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py: "PyQt5.QtWidgets" lines:[[327]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/entry_widget.py: "sys" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/entry_widget.py: "PyQt5.QtWidgets" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.widgets.widget_baseclass" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py: "sys" lines:[[556]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.widgets.widget_baseclass" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.core" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.Qsci" lines:[[58]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtWidgets" lines:[[1144]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtCore" lines:[[1145]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtGui" lines:[[1146]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qt5_graphics" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.widgets.widget_baseclass" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.core" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "sys" lines:[[512]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "PyQt5.QtWidgets" lines:[[513]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.gcode_editor" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.widget_baseclass" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtWidgets" lines:[[523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtCore" lines:[[524]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtGui" lines:[[525]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_input.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_output.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.widget_baseclass" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "sys" lines:[[216]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "PyQt5.QtWidgets" lines:[[217]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py: "sys" lines:[[375]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py: "PyQt5.QtWidgets" lines:[[376]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py: "sys" lines:[[195]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py: "qtvcp.widgets.widget_baseclass" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtCore" lines:[[22], [[25]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py: "sys" lines:[[655]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtWidgets" lines:[[656]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py: "sys" lines:[[242]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py: "PyQt5.QtWidgets" lines:[[243]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py: "sys" lines:[[133]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py: "PyQt5.QtWidgets" lines:[[134]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.entry_widget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.touchEntry" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py: "PyQt5" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py: "sys" lines:[[664]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.mdi_line" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtWidgets" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtCore" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtGui" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py: "sys" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: skipping "time" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.widgets.entry_widget" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.lib.aux_program_loader" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "sys" lines:[[330]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py: "PyQt5.QtWidgets" lines:[[331]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtWidgets" lines:[[393]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtCore" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtGui" lines:[[395]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "sys" lines:[[396]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py: skipping "sys" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "gcode" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qt5_graphics" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp.core" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "sys" lines:[[202]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "PyQt5.QtWidgets" lines:[[203]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "PyQt5.QtWidgets" lines:[[516]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py: "sys" lines:[[387]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtWidgets" lines:[[388]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtCore" lines:[[389]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "time" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.widgets.probe_routines" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/qtvcp_icons.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.widgets.widget_baseclass" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "sys" lines:[[64]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "PyQt5.QtWidgets" lines:[[65]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/richtext_selector.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/richtext_selector.py: skipping "sys" lines:[10] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py: "sys" lines:[[318]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py: "PyQt5.QtWidgets" lines:[[319]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_progress.py: "sys" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_progress.py: "PyQt5.QtWidgets" lines:[[294]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtWidgets" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtCore" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtGui" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "linuxcnc" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.xembed" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.message" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.notify" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.audio_player" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.preferences" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.machine_log" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "zmq" lines:[[[61]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "json" lines:[[[67]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[[[[[407]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.dialog_widget" lines:[[[515], [530], [540], [548], [556], [565], [584], [592], [601], [609], [617], [625], [634], [642], [650]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.overlay_widget" lines:[[[573]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.lib.aux_program_loader" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.core" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.simple_widgets" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py: "sys" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.widgets.led_widget" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py: "sys" lines:[[558]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py: "PyQt5.QtGui" lines:[[559]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.simple_widgets" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtWidgets" lines:[[785]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtCore" lines:[[786]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtGui" lines:[[787]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py: "sys" lines:[[789]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.core" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.qt_makegui" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.dialog_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py: "sys" lines:[[123]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py: "PyQt5.QtWidgets" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "PyQt5.QtWidgets" lines:[[587]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtWidgets" lines:[[268]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtCore" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtGui" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/touchEntry.py: "sys" lines:[[271]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.widget_baseclass" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.dialogMixin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtWidgets" lines:[[593]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtCore" lines:[[594]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtGui" lines:[[595]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtWidgets" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtCore" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtGui" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebEngineWidgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebKitWidgets" lines:[[[[17]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.widgets.widget_baseclass" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.lib" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py: "PyQt5.QtWidgets" lines:[[137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py: "_togl" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py: "glnav" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py: "tkinter.dialog" lines:[[[209]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/__init__.py: "rs274.interpret" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/author.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/glcanon.py: "rs274" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/glcanon.py: "hershey" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/glcanon.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/glcanon.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/interpret.py: "gcode" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/options.py: "nf" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/options.py: skipping "sys" lines:[167] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_HAL.py: "configparser" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_INI.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_INI.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/import_mach.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/pages.py: skipping "sys" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/pages.py: "stepconf" lines:[[[[221]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/tooldb.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/emc_interface.py: skipping "__main__" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/hal_interface.py: "hal" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/touchy/preferences.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py: "pyvcp_widgets" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vcpparse.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vismach.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vismach.py: "rs274.OpenGLTk" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vismach.py: "hal" lines:[18, 25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/vismach.py: "glnav" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "tkinter" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "pickle" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "nf" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "rs274.options" lines:[[13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "os" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py: "stdglue" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py: "remap" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: "qtvcp.widgets.file_manager" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "hal" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.core" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.lib.preferences" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.simple_widgets" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.simple_widgets" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.led_widget" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.widgets.dialog_widget" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.dialog_widget" lines:[11, 12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.nurbs_editor" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.toolbar_actions" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.core" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.keybindings" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.aux_program_loader" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.notify" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.dialog_widget" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.preferences" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.overlay_widget" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.tool_offsetview" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.dialog_widget" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.notify" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.geditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.status_label" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.state_led" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.bar" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.writer" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.keybindings" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcodes" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[13] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[286]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[297]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[291]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[454]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[459]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.auto_height.auto_height" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.writer" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcodes" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.aux_program_loader" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[454]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[459]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[470]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[474]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[479]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.gcode_editor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.file_manager" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.gcodes" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.action_button" lines:[5666] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.axis_tool_button" lines:[5667] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.camview_widget" lines:[5668] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.dro_widget" lines:[5669] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.file_manager" lines:[5670] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_editor" lines:[5671] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_graphics" lines:[5672] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.hal_label" lines:[5673] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.jog_increments" lines:[5674] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.led_widget" lines:[5675] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.machine_log" lines:[5676] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.mdi_history" lines:[5677] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.screen_options" lines:[5678] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.simple_widgets" lines:[5679] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_label" lines:[5680] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_slider" lines:[5681] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.system_tool_button" lines:[5682] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial" lines:[[[[5320]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial.tools.list_ports" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "hal" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.gcode_editor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.mdi_line" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.tool_offsetview" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.file_manager" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.writer" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcodes" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.simple_widgets" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[229]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[233]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[[[239]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[422]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[427]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.toolbar_actions" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial" lines:[[[[5320]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial.tools.list_ports" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial" lines:[[[[5320]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial.tools.list_ports" lines:[[[[5321]]]]: Ignore for REQ:slight shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/calculatorwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/combi_dro.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/drowidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/gladebuilder.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_dial.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_filechooser.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_gremlin_plus.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_mdihistory.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/hal_sourceview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/iconview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/jogwheel.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetpage_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/offsetwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/overridewidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/persistence.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/speedcontrol.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/tooledit_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gladevcp/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/dialogs.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/getiniinfo.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/icon_theme_helper.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/notification.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gmoccapy/widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/gremlin_view.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/hal_glib.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/private_data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pncconf/tests.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/popupkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/pyui/master.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qt5_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/audio_player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/scara.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/sys_notify.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/toolbar_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/touchoff_subprogram.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/lib/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/logger.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/camview_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/container_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/dialog_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/graphics_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/hal_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/joypad_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/overlay_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/state_led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/status_slider_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/web_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/plugins/widgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_pstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/qt_tstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_button_round.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/action_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/adjustment_bar.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/axis_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/basic_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/calculator.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/camview_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/container_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dialog_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/dro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/entry_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/fake_status.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/file_manager.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/gcode_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/geditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_input.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/general_hal_output.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/hal_selectionbox.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/image_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/jog_increments.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/joypad.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/led_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/machine_log.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_history.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_line.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/mdi_touchy.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/nurbs_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/offset_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/origin_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/overlay_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_routines.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/probe_subprog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/qtvcp_icons.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/radio_axis_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/richtext_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/round_gauge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/screen_options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/simple_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/state_led.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_slider.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/status_stacked.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/stylesheeteditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/system_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tab_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/tool_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/versa_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/virtualkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_baseclass.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/widget_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/qtvcp/widgets/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/OpenGLTk.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/rs274/options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/build_INI.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/import_mach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib64/python3/site-packages/stepconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py is not executable /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emccalib.tcl: line 30: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emccalib.tcl: line 30: `source [file join $::env(HALLIB_DIR) hal_procs_lib.tcl]' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emccalib.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emccalib.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emcdebug.tcl: line 29: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emcdebug.tcl: line 29: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emcdebug.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emcdebug.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctesting.tcl: line 27: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctesting.tcl: line 27: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctesting.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctesting.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctuning.tcl: line 28: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctuning.tcl: line 28: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctuning.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/emctuning.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/genedit.tcl: line 49: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/genedit.tcl: line 49: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/genedit.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halconfig.tcl: line 43: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halconfig.tcl: line 43: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halconfig.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halconfig.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halshow.tcl: line 30: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halshow.tcl: line 30: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halshow.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/halshow.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/pickconfig.tcl: line 102: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/pickconfig.tcl: line 102: ` } else {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/pickconfig.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/popimage: line 31: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/popimage: line 31: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/popimage is ${LINUXCNC_EMCSH-wish} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/popimage: invalid command: ${LINUXCNC_EMCSH-wish} /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/tkbackplot.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/bin/tkbackplot.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/scripts/Set_Coordinates.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/scripts/Set_Coordinates.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/tklinuxcnc.tcl: line 60: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/tklinuxcnc.tcl: line 60: `if ([info exists env(LANG)]) {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/tklinuxcnc.tcl is ${LINUXCNC_EMCSH-emcsh} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/tcl/linuxcnc/tklinuxcnc.tcl: invalid command: ${LINUXCNC_EMCSH-emcsh} shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: /usr/scripts/rip-environment -> /usr/scripts/rip-environment (raw, not installed) shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git indexed by: /usr/bin/git -> git-core, /usr/games/git -> fakegit shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git -> /usr/bin/git -> git-core (via contents_index_bin) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' --- find-requires-deps 2024-09-12 04:02:39.278076953 +0000 +++ filter-requires-deps 2024-09-12 04:02:39.280076980 +0000 @@ -23,3 +23,3 @@ /usr/lib64/python3/site-packages -/usr/scripts/rip-environment + coreutils @@ -176,3 +176,3 @@ tk -typelib(Cairo) + typelib(GLib) find-requires: FINDPACKAGE-COMMANDS: awk basename cat clear cp cut date dirname gcc git grep head ipcrm ln lsb_release mkdir mktemp ps pylupdate5 python3 readlink rm sleep sudo tclsh touch tty uname uptime wc wish xdpyinfo Provides: python3(_hal), python3(_togl), python3(bitfile), python3(bwidget), python3(filtertest) = set:edp3, python3(flowsnake) = set:edp3, python3(gcode), python3(gladevcp), python3(gladevcp.calculatorwidget), python3(gladevcp.combi_dro), python3(gladevcp.core), python3(gladevcp.drowidget), python3(gladevcp.gladebuilder), python3(gladevcp.gtk_action), python3(gladevcp.hal_actions), python3(gladevcp.hal_bar), python3(gladevcp.hal_dial), python3(gladevcp.hal_filechooser), python3(gladevcp.hal_graph), python3(gladevcp.hal_gremlin), python3(gladevcp.hal_gremlin_plus), python3(gladevcp.hal_lightbutton), python3(gladevcp.hal_mdihistory), python3(gladevcp.hal_meter), python3(gladevcp.hal_pyngcgui), python3(gladevcp.hal_pythonplugin), python3(gladevcp.hal_sourceview), python3(gladevcp.hal_widgets), python3(gladevcp.iconview), python3(gladevcp.jogwheel), python3(gladevcp.led), python3(gladevcp.macro_widget), python3(gladevcp.makepins), python3(gladevcp.offsetpage_widget), python3(gladevcp.offsetwidget), python3(gladevcp.overridewidget), python3(gladevcp.persistence), python3(gladevcp.speedcontrol), python3(gladevcp.state_label), python3(gladevcp.status_label), python3(gladevcp.tooledit_widget), python3(gladevcp.xembed), python3(gladevcp_makepins), python3(glnav), python3(gmoccapy), python3(gmoccapy.dialogs), python3(gmoccapy.getiniinfo), python3(gmoccapy.icon_theme_helper), python3(gmoccapy.notification), python3(gmoccapy.player), python3(gmoccapy.preferences), python3(gmoccapy.widgets), python3(gremlin), python3(gremlin_view), python3(gscreen), python3(gscreen.emc_interface), python3(gscreen.keybindings), python3(gscreen.mdi), python3(gscreen.preferences), python3(hal), python3(hal_glib), python3(hershey), python3(holecircle) = set:edp3, python3(involute) = set:edp3, python3(lineardeltakins), python3(linux_event), python3(linuxcnc), python3(linuxcnc_util), python3(multifilebuilder), python3(nf), python3(panels.cam_align.cam_align_handler) = set:ed3l, python3(panels.copy.copy_handler) = set:ed3l, python3(panels.qtplasmac_sim.qtplasmac_sim_handler) = set:ed3l, python3(panels.sim_panel.sim_panel_handler) = set:ed3l, python3(panels.spindle_belts.spindle_belts_handler) = set:ed3l, python3(panels.test_button.test_button_handler) = set:ed3l, python3(panels.test_dial.test_dial_handler) = set:ed3l, python3(panels.test_led.test_led_handler) = set:ed3l, python3(panels.test_panel.test_panel_handler) = set:ed3l, python3(panels.test_probe.test_probe_handler) = set:ed3l, python3(panels.tool_dialog.tool_dialog_handler) = set:ed3l, python3(panels.versaprobe.versaprobe_handler) = set:ed3l, python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler) = set:ed3l, python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler) = set:ed3l, python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler) = set:ed3l, python3(panels.vismach_millturn.vismach_millturn_handler) = set:ed3l, python3(panels.vismach_router_atc.vismach_router_atc_handler) = set:ed3l, python3(panels.vismach_scara.vismach_scara_handler) = set:ed3l, python3(plasmac.block), python3(plasmac.bolt_circle), python3(plasmac.circle), python3(plasmac.ellipse), python3(plasmac.gusset), python3(plasmac.line), python3(plasmac.polygon), python3(plasmac.rectangle), python3(plasmac.run_from_line), python3(plasmac.sector), python3(plasmac.slot), python3(plasmac.star), python3(plasmac.triangle), python3(pncconf), python3(pncconf.build_HAL), python3(pncconf.build_INI), python3(pncconf.data), python3(pncconf.pages), python3(pncconf.private_data), python3(pncconf.tests), python3(popupkeyboard), python3(propertywindow), python3(pyhal), python3(pyngcgui), python3(pyui), python3(pyui.commands), python3(pyui.master), python3(pyui.panelui_validate), python3(pyui.widgets), python3(pyvcp_widgets), python3(qt5_graphics), python3(qtvcp), python3(qtvcp.core), python3(qtvcp.lib), python3(qtvcp.lib.audio_player), python3(qtvcp.lib.auto_height.auto_height), python3(qtvcp.lib.aux_program_loader), python3(qtvcp.lib.colored_formatter), python3(qtvcp.lib.gcode_utility), python3(qtvcp.lib.gcode_utility.facing), python3(qtvcp.lib.gcode_utility.hole_circle), python3(qtvcp.lib.gcode_utility.hole_enlarge), python3(qtvcp.lib.gcodes), python3(qtvcp.lib.keybindings), python3(qtvcp.lib.machine_log), python3(qtvcp.lib.mdi_text), python3(qtvcp.lib.message), python3(qtvcp.lib.notify), python3(qtvcp.lib.preferences), python3(qtvcp.lib.qt_ngcgui.ngcgui), python3(qtvcp.lib.qt_pdf.PDFViewer), python3(qtvcp.lib.qt_vismach), python3(qtvcp.lib.qt_vismach.fanuc_200f), python3(qtvcp.lib.qt_vismach.gantry_5axis), python3(qtvcp.lib.qt_vismach.mill_xyz), python3(qtvcp.lib.qt_vismach.millturn), python3(qtvcp.lib.qt_vismach.primitives), python3(qtvcp.lib.qt_vismach.qt_vismach), python3(qtvcp.lib.qt_vismach.scara), python3(qtvcp.lib.qtplasmac), python3(qtvcp.lib.qtplasmac.conv_block), python3(qtvcp.lib.qtplasmac.conv_bolt), python3(qtvcp.lib.qtplasmac.conv_circle), python3(qtvcp.lib.qtplasmac.conv_ellipse), python3(qtvcp.lib.qtplasmac.conv_gusset), python3(qtvcp.lib.qtplasmac.conv_line), python3(qtvcp.lib.qtplasmac.conv_polygon), python3(qtvcp.lib.qtplasmac.conv_rectangle), python3(qtvcp.lib.qtplasmac.conv_sector), python3(qtvcp.lib.qtplasmac.conv_settings), python3(qtvcp.lib.qtplasmac.conv_slot), python3(qtvcp.lib.qtplasmac.conv_star), python3(qtvcp.lib.qtplasmac.conv_triangle), python3(qtvcp.lib.qtplasmac.conversational), python3(qtvcp.lib.qtplasmac.set_offsets), python3(qtvcp.lib.qtplasmac.tooltips), python3(qtvcp.lib.qtplasmac.updater), python3(qtvcp.lib.ripper.gcode_ripper), python3(qtvcp.lib.sys_notify), python3(qtvcp.lib.toolbar_actions), python3(qtvcp.lib.touchoff_subprogram), python3(qtvcp.lib.virtual_keyboard), python3(qtvcp.lib.writer), python3(qtvcp.lib.writer.ext), python3(qtvcp.lib.writer.ext.datetime), python3(qtvcp.lib.writer.ext.find), python3(qtvcp.lib.writer.ext.table), python3(qtvcp.lib.writer.ext.wordcount), python3(qtvcp.lib.writer.writer), python3(qtvcp.lib.xembed), python3(qtvcp.logger), python3(qtvcp.plugins), python3(qtvcp.plugins.actionbutton_plugin), python3(qtvcp.plugins.bar_plugin), python3(qtvcp.plugins.basic_probe_plugin), python3(qtvcp.plugins.camview_plugin), python3(qtvcp.plugins.container_plugin), python3(qtvcp.plugins.detach_tabs_plugin), python3(qtvcp.plugins.dialog_plugin), python3(qtvcp.plugins.graphics_plugin), python3(qtvcp.plugins.hal_label_plugin), python3(qtvcp.plugins.jogincrements_plugin), python3(qtvcp.plugins.joypad_plugin), python3(qtvcp.plugins.led_plugin), python3(qtvcp.plugins.nurbs_editor_plugin), python3(qtvcp.plugins.overlay_plugin), python3(qtvcp.plugins.qtvcp_plugin), python3(qtvcp.plugins.round_gauge_plugin), python3(qtvcp.plugins.round_progress_bar_plugin), python3(qtvcp.plugins.screenoptions_plugin), python3(qtvcp.plugins.simplewidgets_plugin), python3(qtvcp.plugins.state_label_plugin), python3(qtvcp.plugins.state_led_plugin), python3(qtvcp.plugins.status_adjustment_bar_plugin), python3(qtvcp.plugins.status_label_plugin), python3(qtvcp.plugins.status_slider_plugin), python3(qtvcp.plugins.tab_widget_plugin), python3(qtvcp.plugins.toolbutton_plugin), python3(qtvcp.plugins.versa_probe_plugin), python3(qtvcp.plugins.virtualkeyboard_plugin), python3(qtvcp.plugins.web_widget_plugin), python3(qtvcp.plugins.widgets_plugin), python3(qtvcp.qt_action), python3(qtvcp.qt_istat), python3(qtvcp.qt_makegui), python3(qtvcp.qt_makepins), python3(qtvcp.qt_pstat), python3(qtvcp.qt_tstat), python3(qtvcp.qtvcp_handler), python3(qtvcp.widgets), python3(qtvcp.widgets.action_button), python3(qtvcp.widgets.action_button_round), python3(qtvcp.widgets.action_tool_button), python3(qtvcp.widgets.adjustment_bar), python3(qtvcp.widgets.axis_tool_button), python3(qtvcp.widgets.bar), python3(qtvcp.widgets.basic_probe), python3(qtvcp.widgets.calculator), python3(qtvcp.widgets.camview_widget), python3(qtvcp.widgets.container_widgets), python3(qtvcp.widgets.detach_tabs), python3(qtvcp.widgets.dialogMixin), python3(qtvcp.widgets.dialog_widget), python3(qtvcp.widgets.dro_widget), python3(qtvcp.widgets.entry_widget), python3(qtvcp.widgets.fake_status), python3(qtvcp.widgets.file_manager), python3(qtvcp.widgets.gcode_editor), python3(qtvcp.widgets.gcode_graphics), python3(qtvcp.widgets.geditor), python3(qtvcp.widgets.general_hal_input), python3(qtvcp.widgets.general_hal_output), python3(qtvcp.widgets.hal_label), python3(qtvcp.widgets.hal_selectionbox), python3(qtvcp.widgets.image_switcher), python3(qtvcp.widgets.jog_increments), python3(qtvcp.widgets.joypad), python3(qtvcp.widgets.led_widget), python3(qtvcp.widgets.machine_log), python3(qtvcp.widgets.macro_widget), python3(qtvcp.widgets.mdi_history), python3(qtvcp.widgets.mdi_line), python3(qtvcp.widgets.mdi_touchy), python3(qtvcp.widgets.nurbs_editor), python3(qtvcp.widgets.offset_tool_button), python3(qtvcp.widgets.origin_offsetview), python3(qtvcp.widgets.overlay_widget), python3(qtvcp.widgets.probe_routines), python3(qtvcp.widgets.probe_subprog), python3(qtvcp.widgets.qtvcp_icons), python3(qtvcp.widgets.radio_axis_selector), python3(qtvcp.widgets.richtext_selector), python3(qtvcp.widgets.round_gauge), python3(qtvcp.widgets.round_progress), python3(qtvcp.widgets.runFromLine_dialog), python3(qtvcp.widgets.screen_options), python3(qtvcp.widgets.simple_widgets), python3(qtvcp.widgets.state_label), python3(qtvcp.widgets.state_led), python3(qtvcp.widgets.status_label), python3(qtvcp.widgets.status_slider), python3(qtvcp.widgets.status_stacked), python3(qtvcp.widgets.stylesheeteditor), python3(qtvcp.widgets.system_tool_button), python3(qtvcp.widgets.tab_widget), python3(qtvcp.widgets.tool_offsetview), python3(qtvcp.widgets.touchEntry), python3(qtvcp.widgets.versa_probe), python3(qtvcp.widgets.virtualkeyboard), python3(qtvcp.widgets.web_widget), python3(qtvcp.widgets.widget_baseclass), python3(qtvcp.widgets.widget_switcher), python3(qtvcp.widgets.xembed), python3(rotarydeltakins), python3(rs274), python3(rs274.OpenGLTk), python3(rs274.author), python3(rs274.glcanon), python3(rs274.interpret), python3(rs274.options), python3(screens.blender.blender_handler) = set:ed3l, python3(screens.qt_cnc.qt_cnc_handler) = set:ed3l, python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler) = set:ed3l, python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler) = set:ed3l, python3(screens.qtaxis.qtaxis_handler) = set:ed3l, python3(screens.qtdragon.qtdragon_handler) = set:ed3l, python3(screens.qtdragon_hd.qtdragon_hd_handler) = set:ed3l, python3(screens.qtlathe.qtlathe_handler) = set:ed3l, python3(screens.qtplasmac.languages.qtplasmac) = set:ed3l, python3(screens.qtplasmac.qtplasmac_handler) = set:ed3l, python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler) = set:ed3l, python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler) = set:ed3l, python3(screens.qttouchy.qttouchy_handler) = set:ed3l, python3(screens.tester.tester_handler) = set:ed3l, python3(screens.woodpecker.woodpecker_handler) = set:ed3l, python3(screens.x1mill.x1mill_handler) = set:ed3l, python3(stepconf), python3(stepconf.build_HAL), python3(stepconf.build_INI), python3(stepconf.import_mach), python3(stepconf.pages), python3(tooldb), python3(touchy), python3(touchy.emc_interface), python3(touchy.filechooser), python3(touchy.hal_interface), python3(touchy.listing), python3(touchy.mdi), python3(touchy.preferences), python3(vcpparse), python3(vismach), tcl(Hal), tcl(Hal)-1 = 1.0, tcl(Linuxcnc), tcl(Linuxcnc)-1 = 1.0, tcl(Ngcgui), tcl(Ngcgui)-1 = 1.0, tcl(Ngcguittt), tcl(Ngcguittt)-1 = 1.0 Requires: liblinuxcnc = 2.9.3-alt3.20240830, libGLU, python3-module-PyQt5-devel, libgtksourceview4-gir, libX11-devel, python3(PyQt5.QtWebEngineWidgets) < 0, python3(cv2) < 0, tclx, tcl-blt, python3(Xlib) < 0, python3(PyQt5.Qsci) < 0, /bin/bash, /bin/sh, /lib64/ld-linux-x86-64.so.2, /usr/bin/env, /usr/bin/python3, /usr/bin/python3.12, /usr/bin/tclsh, /usr/bin/tclsh8.6, /usr/bin/wish, /usr/bin/wish8.6, /usr/lib64/python3/site-packages, coreutils, gawk, gcc-common, git-core, grep, libX11.so.6()(64bit) >= set:oja5r3qabUpLHlTcdkK7Ymnta6aWUK6qURI2aereyuySbaY9Y9rRf80, libXinerama.so.1()(64bit) >= set:hfyH4K6, libXmu.so.6()(64bit) >= set:lktel, libboost_python312.so.1.85.0()(64bit) >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5moykH1LMi5ABX8jNZcjNUYdkJhp5IPM2DyJSTaUJKs5uAZ9E84YKyPfk70WuwhWAoTpxDn5EQ7cmsOD7oHL84Zv6OIixcg4Usfuc8949VHXJyhjF6oq0, libc.so.6(GLIBC_2.14)(64bit), libc.so.6(GLIBC_2.15)(64bit), libc.so.6(GLIBC_2.17)(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.27)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libc.so.6(GLIBC_2.32)(64bit), libc.so.6(GLIBC_2.33)(64bit), libc.so.6(GLIBC_2.34)(64bit), libc.so.6(GLIBC_2.38)(64bit), libc.so.6(GLIBC_2.4)(64bit), libc.so.6(GLIBC_2.7)(64bit), libc.so.6(GLIBC_2.8)(64bit), libcairo.so.2()(64bit) >= set:miBeiC9UuDqAUQ1bepgkhH08f6m87ljhFbj6, libepoxy.so.0()(64bit) >= set:plG6OtaOh21hPpoEbYgihHZ0wsB7PrHp7He0, libgcc_s.so.1(GCC_3.0)(64bit), libgcc_s.so.1(GCC_3.3.1)(64bit), libgdk-3.so.0()(64bit) >= set:nkZ5ndiwLew01gu7UA, libgdk-x11-2.0.so.0()(64bit) >= set:njH9A3kDQ0iQRBflIP1zlE5TpwDZsPmjGbQ, libglib-2.0.so.0()(64bit) >= set:olyg8bKheHPr7MU1, libgobject-2.0.so.0()(64bit) >= set:mjQCdZlc930HMK1, libgtk-3.so.0()(64bit) >= set:qjjZoCF3lFXh6tMGe5LNfHjmYeZBthRtN41TeIZzjgwWOrHiSh2NZBTl9RaGCZcaZtsSDoklAfoY3jZqdwNTjVxluts4fzptNZoObnMXHUBHYRt39LkeFCpeX0XGSNmA8AjwtwC5hgzieP0K2oI8aJb3kDhZ4iVp7IxwWvgRbyDTqaJhAOTD2Fv8g9yPZ6NOuGRIGtqP9FiPwZfRTshMUVUTNtViaQgX5ndOGrJMiFzxXDm6AW3HZBRN91ZxbqL4uj5Pt3embDjf1R8JsH7xQTCBVCxMfYTOJIZFI9ZbiGb6GLX0FyKvWxZH06khJ56lr41PV7VxkpV7CX5AN30dAgkjASU69WAU20ZKQEW5CdLKnYV6PQaWR9Q2d4, libgtk-x11-2.0.so.0()(64bit) >= set:pijZofB1Sac1HWm6UJI4cT7ZgTZ5cu7LyBFNQFMTkKvPsM6syJWtgE6gCt8VZC2002Yr6O3qpMKORxMYFpGbygZwTFmPjEBmkFK5tZ9puR8V4nvNqcMb9Q8ET5Z5nwuEj7uZbKfI69aHIIc6AKSdSXr1KNVy75UzoI60weGwIZrr62BMCZ1BOfXpj2M6ZjtlXi25ghyZccTXY7GXsFuvoeSJ3yKQFbX9A7iCzUEYa6aZ04fAonLTJJ2yQZ7HcxVrWamaKGUdBx8Y99PalB5dPYDzTFF762xI20, liblinuxcnchal.so.0()(64bit) >= set:kdPx99okMC0Dz1625MawlIfquO3JZ3ZIUi5Jl7M43uZ4jrJfiRqxZ2hezaWOwqo8jNxXb4PXA5GbMGAP8gNN7e5Z7F9EPZhr3lvZ8aQw6VY2Cu2agoAmBmnw7UQIPmWiMLuqjUJnhudWalGzhjgU7, liblinuxcncini.so.0()(64bit) >= set:jf3pACnRkFYa1jK9dmLdZcAMQZdApdlX3Z1, libm.so.6(GLIBC_2.2.5)(64bit), libm.so.6(GLIBC_2.29)(64bit), libm.so.6(GLIBC_2.35)(64bit), libm.so.6(GLIBC_2.38)(64bit), libmodbus.so.5()(64bit) >= set:kf4sxmJBcjkoYXJ6nZ8w1f3UAmWo529bNQO9HdZ6GfYWQgMVJKZenaurI1UX4, libnml.so.0()(64bit) >= set:nh37ilOAzaAX5CzUjO90CsDzkrMZ7aF3zbOG4plK5uaH2z5ZL4kIXO19kvydMP0Ous4ykV25F3mCdWNlKOPWKTPCje68TRQPcHDIwZaNiWGgZDSqajrVXGCmzmwK9kEnrrZAXgB, libpango-1.0.so.0()(64bit) >= set:miqUTrpg55DU675j31iPjU59gVL2, libpangocairo-1.0.so.0()(64bit) >= set:jiZ1Z0, libposemath.so.0()(64bit) >= set:mhNqbLmit1h1SKAkf3R8yKzITkH51qlNb2mXMvLIbzYdLSZ1Pn3dvFo360T4Ym3VUZ06J9T65VCYVK5, libpyplugin.so.0()(64bit) >= set:ifB9gZhMHZs51, libpython3.12.so.1.0()(64bit) >= set:oipCiruqzTeZzb6nQEDgYmcycRwVJdbZ5iXKYZiJODaguD1Z09heVWM4C62R9XS3UbkznKwtFB0v3EX8wxJskhoMjZnQOps91h0gXMB2zZ0ZiESnuTSI6RauE3xO1AePZyWlNaBQhCb27NyC2QiQiNF0zEU1FA9BQnlAid, libreadline.so.8()(64bit) >= set:njCJKlFcmgU8mvL3SqZmyq3ZFmIppb, librs274.so.0()(64bit) >= set:oklu8nstiJF4gERvmYKLZu2B25LRi2g8GwakLmkAhIVMce, libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(CXXABI_1.3.9)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libstdc++.so.6(GLIBCXX_3.4.11)(64bit), libstdc++.so.6(GLIBCXX_3.4.14)(64bit), libstdc++.so.6(GLIBCXX_3.4.15)(64bit), libstdc++.so.6(GLIBCXX_3.4.20)(64bit), libstdc++.so.6(GLIBCXX_3.4.21)(64bit), libstdc++.so.6(GLIBCXX_3.4.29)(64bit), libstdc++.so.6(GLIBCXX_3.4.32)(64bit), libstdc++.so.6(GLIBCXX_3.4.9)(64bit), libtk8.6.so()(64bit) >= set:mh48jtZxaNUhMsSfBJ4AXC6RIwDmyqFM8nd9l1ee9PQ0ud0, libtooldata.so.0()(64bit) >= set:ieCH2SkPFzG4BeSHWNfZwfGC1oYUwSluc7, libudev.so.1()(64bit) >= set:kgKhqJ5KQ3IrBeCbBEkBBomRh1RpLFAx211, libudev.so.1(LIBUDEV_183)(64bit), libusb-1.0.so.0()(64bit) >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu, lsb-release, procps, python3, python3(OpenGL) < 0, python3(OpenGL.GL) < 0, python3(OpenGL.GLU) < 0, python3(OpenGL.raw.GLX._types) < 0, python3(PyQt5) < 0, python3(PyQt5.QtCore) < 0, python3(PyQt5.QtDesigner) < 0, python3(PyQt5.QtGui) < 0, python3(PyQt5.QtPrintSupport) < 0, python3(PyQt5.QtWidgets) < 0, python3(__future__) < 0, python3(array) < 0, python3(binascii) < 0, python3(cairo) < 0, python3(collections) < 0, python3(configobj) < 0, python3(configparser) < 0, python3(copy) < 0, python3(ctypes) < 0, python3(datetime) < 0, python3(dbus) < 0, python3(decimal) < 0, python3(enum) < 0, python3(fcntl) < 0, python3(fnmatch) < 0, python3(functools) < 0, python3(getopt) < 0, python3(gettext) < 0, python3(gi) < 0, python3(gi.repository) < 0, python3(glob) < 0, python3(hashlib) < 0, python3(importlib) < 0, python3(inspect) < 0, python3(json) < 0, python3(locale) < 0, python3(logging) < 0, python3(math) < 0, python3(mimetypes) < 0, python3(numpy) < 0, python3(numpy.core) < 0, python3(operator) < 0, python3(optparse) < 0, python3(os) < 0, python3(pickle) < 0, python3(random) < 0, python3(re) < 0, python3(readline) < 0, python3(select) < 0, python3(serial) < 0, python3(shutil) < 0, python3(signal) < 0, python3(socket) < 0, python3(string) < 0, python3(struct) < 0, python3(subprocess) < 0, python3(tarfile) < 0, python3(tempfile) < 0, python3(textwrap) < 0, python3(threading) < 0, python3(tkinter) < 0, python3(traceback) < 0, python3(types) < 0, python3(uuid) < 0, python3(validate) < 0, python3(warnings) < 0, python3(webbrowser) < 0, python3(xml.dom.minidom) < 0, python3(xml.etree.ElementPath) < 0, python3(xml.etree.ElementTree) < 0, python3(yapps) < 0, python3.12-ABI(64bit), rtld(GNU_HASH), sudo, tcl, tcl(BWidget), tcl(Tk), tcl(Tk)-8 >= 8.0, termutils, tk, typelib(GLib), typelib(GObject), typelib(Gdk), typelib(GdkPixbuf), typelib(GdkX11), typelib(Gio), typelib(Gst), typelib(Gtk), typelib(GtkSource), typelib(Notify), typelib(Pango), typelib(PangoCairo), typelib(Vte), util-linux, xdpyinfo Requires(rpmlib): rpmlib(SetVersions) Obsoletes: linuxcnc-data <= 2.9.3-alt3.20240830 Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.USXvZj Creating linuxcnc-debuginfo package Processing files: liblinuxcnc-devel-2.9.3-alt3.20240830 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.zOAtZD find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.xrthQI find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/modal_state.hh:25:10: fatal error: vector: No such file or directory 25 | #include | ^~~~~~~~ compilation terminated. cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh: cpp failed, trying c++ mode /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh: cpp failed /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh:19:10: fatal error: rpc/rpc.h: No such file or directory 19 | #include /* struct XDR */ | ^~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h:24: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h:20: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h:34: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h:33: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h:40: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h: cpp failed In file included from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/object_fwd.hpp:8, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh:27: /usr/include/boost/python/detail/wrap_python.hpp:57:11: fatal error: pyconfig.h: No such file or directory 57 | # include | ^~~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh: cpp failed ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.3-alt3.20240830, /usr/lib64/liblinuxcnchal.so.0, /usr/lib64/liblinuxcncini.so.0, /usr/lib64/libnml.so.0, /usr/lib64/libposemath.so.0, /usr/lib64/libpyplugin.so.0, /usr/lib64/librs274.so.0, /usr/lib64/libtooldata.so.0, boost-devel-headers Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.w6iB00 Processing files: liblinuxcnc-2.9.3-alt3.20240830 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.SknUa3 find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/liblinuxcnchal.so.0: 119 symbols, 17 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/liblinuxcncini.so.0: 35 symbols, 16 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/libnml.so.0: 836 symbols, 20 bpp warning: hash collision: _ZN3NML12format_inputEP6NMLmsg count_characters_in_print_list lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/libposemath.so.0: 415 symbols, 19 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/libpyplugin.so.0: 23 symbols, 15 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/librs274.so.0: 2000 symbols, 21 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib64/libtooldata.so.0: 21 symbols, 15 bpp Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.vtUKTl find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: liblinuxcnchal.so.0()(64bit) = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2, liblinuxcncini.so.0()(64bit) = set:jd3p0VwoIC1nklXuZ8BZ0asicGtuLE4cjtB3TwUgUmz44gZp8fYchoqpMI2wdh66lX1JfOyGJ970, libnml.so.0()(64bit) = set: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, libposemath.so.0()(64bit) = set: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, libpyplugin.so.0()(64bit) = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxifLv4LPqR15xNTYNE5, librs274.so.0()(64bit) = set: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, libtooldata.so.0()(64bit) = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Requires: libboost_python312.so.1.85.0()(64bit) >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdR2bA8RqM5mGwkKXcGCRDdTPzyNMTMqzp5SpoxPKmKTnJQMFAsJFEsRmPay8ShK2fOmDlS1gvFDLHEZsgr00yUjytD5eL6V9uR7cmY40PURuzx00SV7xgZcNECROSo2w8Mot6dMy1BgAALLdnlZgbaR0cd0, libc.so.6(GLIBC_2.14)(64bit), libc.so.6(GLIBC_2.15)(64bit), libc.so.6(GLIBC_2.17)(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.3)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libc.so.6(GLIBC_2.32)(64bit), libc.so.6(GLIBC_2.33)(64bit), libc.so.6(GLIBC_2.34)(64bit), libc.so.6(GLIBC_2.38)(64bit), libc.so.6(GLIBC_2.4)(64bit), libc.so.6(GLIBC_2.9)(64bit), libgcc_s.so.1(GCC_3.0)(64bit), libgcc_s.so.1(GCC_3.3.1)(64bit), libgcc_s.so.1(GCC_4.0.0)(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libm.so.6(GLIBC_2.29)(64bit), libm.so.6(GLIBC_2.35)(64bit), libm.so.6(GLIBC_2.38)(64bit), libpython3.12.so.1.0()(64bit) >= set:oi0GOBAUI3x9Zm2hWASt1vZ3R4nYYfA4VAH3joq8Yna2GUTvbSg3QBmBWdwKz06SOh5x1fxZEHbvodwVQDokPlMCfIgsrE3xO1AuPv374qZiTjyQZcRdeSUEtPaaoPfwkCRbdyfJ0, libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(CXXABI_1.3.5)(64bit), libstdc++.so.6(CXXABI_1.3.9)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libstdc++.so.6(GLIBCXX_3.4.11)(64bit), libstdc++.so.6(GLIBCXX_3.4.15)(64bit), libstdc++.so.6(GLIBCXX_3.4.18)(64bit), libstdc++.so.6(GLIBCXX_3.4.21)(64bit), libstdc++.so.6(GLIBCXX_3.4.26)(64bit), libstdc++.so.6(GLIBCXX_3.4.29)(64bit), libstdc++.so.6(GLIBCXX_3.4.32)(64bit), libstdc++.so.6(GLIBCXX_3.4.9)(64bit), libtirpc.so.3()(64bit) >= set:miLQRMTfkMBlyKlAtNseOZekznKvK3HZEZCwnOh, libtirpc.so.3(TIRPC_0.3.0)(64bit), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.SdEVmC Creating liblinuxcnc-debuginfo package Processing files: linuxcnc-debuginfo-2.9.3-alt3.20240830 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.tsXhvi find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.lYNL9G find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.3-alt3.20240830, /usr/lib/debug/lib64/ld-linux-x86-64.so.2.debug, debug64(libX11.so.6), debug64(libXinerama.so.1), debug64(libXmu.so.6), debug64(libboost_python312.so.1.85.0), debug64(libc.so.6), debug64(libcairo.so.2), debug64(libepoxy.so.0), debug64(libgcc_s.so.1), debug64(libgdk-3.so.0), debug64(libgdk-x11-2.0.so.0), debug64(libglib-2.0.so.0), debug64(libgobject-2.0.so.0), debug64(libgtk-3.so.0), debug64(libgtk-x11-2.0.so.0), debug64(liblinuxcnchal.so.0), debug64(liblinuxcncini.so.0), debug64(libm.so.6), debug64(libmodbus.so.5), debug64(libnml.so.0), debug64(libpango-1.0.so.0), debug64(libpangocairo-1.0.so.0), debug64(libposemath.so.0), debug64(libpyplugin.so.0), debug64(libpython3.12.so.1.0), debug64(libreadline.so.8), debug64(librs274.so.0), debug64(libstdc++.so.6), debug64(libtk8.6.so), debug64(libtooldata.so.0), debug64(libudev.so.1), debug64(libusb-1.0.so.0) Processing files: liblinuxcnc-debuginfo-2.9.3-alt3.20240830 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.VfYwf4 find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.RINHHP find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: debug64(liblinuxcnchal.so.0), debug64(liblinuxcncini.so.0), debug64(libnml.so.0), debug64(libposemath.so.0), debug64(libpyplugin.so.0), debug64(librs274.so.0), debug64(libtooldata.so.0) Requires: liblinuxcnc = 2.9.3-alt3.20240830, debug64(libboost_python312.so.1.85.0), debug64(libc.so.6), debug64(libgcc_s.so.1), debug64(libm.so.6), debug64(libpython3.12.so.1.0), debug64(libstdc++.so.6), debug64(libtirpc.so.3) Adding to liblinuxcnc-devel a strict dependency on linuxcnc Adding to linuxcnc a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on linuxcnc Adding to liblinuxcnc-debuginfo a strict dependency on liblinuxcnc Adding to liblinuxcnc-devel a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on liblinuxcnc-debuginfo Removing from linuxcnc-debuginfo 47 sources provided by liblinuxcnc-debuginfo also prunning dir /usr/src/debug/linuxcnc-2.9.3/src/emc/pythonplugin also prunning dir /usr/src/debug/linuxcnc-2.9.3/src/libnml/cms also prunning dir /usr/src/debug/linuxcnc-2.9.3/src/libnml/linklist also prunning dir /usr/src/debug/linuxcnc-2.9.3/src/libnml/nml also prunning dir /usr/src/debug/linuxcnc-2.9.3/src/libnml/os_intf also prunning dir /usr/src/debug/linuxcnc-2.9.3/src/libnml/posemath also prunning dir /usr/src/debug/linuxcnc-2.9.3/src/libnml/rcs Removing 7 extra deps from linuxcnc due to dependency on liblinuxcnc Removing 7 extra deps from liblinuxcnc-devel due to dependency on liblinuxcnc Removing 7 extra deps from linuxcnc-debuginfo due to dependency on liblinuxcnc-debuginfo Removing 1 extra deps from liblinuxcnc-devel due to repentancy on linuxcnc Removing 28 extra deps from linuxcnc due to repentancy on liblinuxcnc Removing 6 extra deps from linuxcnc-debuginfo due to repentancy on liblinuxcnc-debuginfo Wrote: /usr/src/RPM/RPMS/x86_64/linuxcnc-2.9.3-alt3.20240830.x86_64.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/x86_64/liblinuxcnc-devel-2.9.3-alt3.20240830.x86_64.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/x86_64/liblinuxcnc-2.9.3-alt3.20240830.x86_64.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/x86_64/linuxcnc-debuginfo-2.9.3-alt3.20240830.x86_64.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/x86_64/liblinuxcnc-debuginfo-2.9.3-alt3.20240830.x86_64.rpm (w2T16.xzdio) 310.62user 199.13system 2:40.85elapsed 316%CPU (0avgtext+0avgdata 590388maxresident)k 0inputs+0outputs (0major+24796719minor)pagefaults 0swaps 6.00user 4.70system 3:39.45elapsed 4%CPU (0avgtext+0avgdata 135760maxresident)k 2360inputs+0outputs (0major+428920minor)pagefaults 0swaps --- linuxcnc-2.9.3-alt3.20240830.x86_64.rpm.repo 2024-08-31 08:05:10.000000000 +0000 +++ linuxcnc-2.9.3-alt3.20240830.x86_64.rpm.hasher 2024-09-12 04:03:55.579108251 +0000 @@ -7076,3 +7076,3 @@ File: /etc/linuxcnc 40755 root:root -File: /etc/linuxcnc/rtapi.conf 100644 root:root ef6ff6c336c21cd4767713a7f8b410e9 +File: /etc/linuxcnc/rtapi.conf 100644 root:root adf62079e5842a362365fa0079b6b47b File: /usr/bin/5axisgui 100755 root:root f3826864e742d63df97b023e93a83803 @@ -7372,3 +7372,3 @@ File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root b40029b5fa554017abc9c38d0893f162 -File: /usr/lib/linuxcnc/realtime 100755 root:root 7355afa68b5a8fe3140a7fe39458ae7a +File: /usr/lib/linuxcnc/realtime 100755 root:root c71a60493ec533f4d0e28c13714b7196 File: /usr/lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 @@ -7390,5 +7390,5 @@ File: /usr/lib64/python3/site-packages/__pycache__/glnav.cpython-312.pyc 100644 root:root ee42cee70b9419618768cea05f7b5456 -File: /usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.opt-1.pyc 100644 root:root 9232256474e15230826a34487eb27980 -File: /usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.opt-2.pyc 100644 root:root a866e919dfca27d31cb849f6ac42ce40 -File: /usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.pyc 100644 root:root 9232256474e15230826a34487eb27980 +File: /usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.opt-1.pyc 100644 root:root 1f414af55236a41252d9183f037f2cc3 +File: /usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.opt-2.pyc 100644 root:root fd128f9617a7139b41ee40758ad99bb0 +File: /usr/lib64/python3/site-packages/__pycache__/gremlin.cpython-312.pyc 100644 root:root 1f414af55236a41252d9183f037f2cc3 File: /usr/lib64/python3/site-packages/__pycache__/gremlin_view.cpython-312.opt-1.pyc 100644 root:root 609742206a945c8c50fda27d4ec33c26 @@ -7405,5 +7405,5 @@ File: /usr/lib64/python3/site-packages/__pycache__/hershey.cpython-312.pyc 100644 root:root fe6a4e228bebcb294167079961cc12bf -File: /usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc 100644 root:root 841940b87b3ecb2fcf1ea45dc641b135 -File: /usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.opt-2.pyc 100644 root:root 841940b87b3ecb2fcf1ea45dc641b135 -File: /usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.pyc 100644 root:root 841940b87b3ecb2fcf1ea45dc641b135 +File: /usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc 100644 root:root a7cd3157ac2b1c13f8c3b84d67142f7f +File: /usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.opt-2.pyc 100644 root:root a7cd3157ac2b1c13f8c3b84d67142f7f +File: /usr/lib64/python3/site-packages/__pycache__/linux_event.cpython-312.pyc 100644 root:root a7cd3157ac2b1c13f8c3b84d67142f7f File: /usr/lib64/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.opt-1.pyc 100644 root:root 6f3db77058f375753a201de1d45c6a34 @@ -7411,5 +7411,5 @@ File: /usr/lib64/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.pyc 100644 root:root 6f3db77058f375753a201de1d45c6a34 -File: /usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc 100644 root:root 02193f980f13b52bcbf666cac98e7636 -File: /usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-2.pyc 100644 root:root 02193f980f13b52bcbf666cac98e7636 -File: /usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.pyc 100644 root:root 02193f980f13b52bcbf666cac98e7636 +File: /usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc 100644 root:root d410e44dfac8c7290191b76928c8f783 +File: /usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-2.pyc 100644 root:root d410e44dfac8c7290191b76928c8f783 +File: /usr/lib64/python3/site-packages/__pycache__/multifilebuilder.cpython-312.pyc 100644 root:root d410e44dfac8c7290191b76928c8f783 File: /usr/lib64/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc 100644 root:root 8a30eca2e402183188d88accf32b6dca @@ -7432,5 +7432,5 @@ File: /usr/lib64/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.pyc 100644 root:root 73e423b5288df0a984e196df0ac38ddf -File: /usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc 100644 root:root 0342e77f3075cea1153139295fdb93dd -File: /usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-2.pyc 100644 root:root 0342e77f3075cea1153139295fdb93dd -File: /usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.pyc 100644 root:root 0342e77f3075cea1153139295fdb93dd +File: /usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc 100644 root:root ef37d09f8eae5461eeeae8d79735f14d +File: /usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-2.pyc 100644 root:root ef37d09f8eae5461eeeae8d79735f14d +File: /usr/lib64/python3/site-packages/__pycache__/qt5_graphics.cpython-312.pyc 100644 root:root ef37d09f8eae5461eeeae8d79735f14d File: /usr/lib64/python3/site-packages/__pycache__/tooldb.cpython-312.opt-1.pyc 100644 root:root 2d62d8e855e522454d48424647d74ee3 @@ -7441,5 +7441,5 @@ File: /usr/lib64/python3/site-packages/__pycache__/vcpparse.cpython-312.pyc 100644 root:root 3c9a71eee16fa4e07bf4a3fd663de14d -File: /usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.opt-1.pyc 100644 root:root bbc73a83e2541f769e16f29b216af76f -File: /usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.opt-2.pyc 100644 root:root 3a0e5ac266877811da7fb52f745e4d24 -File: /usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.pyc 100644 root:root bbc73a83e2541f769e16f29b216af76f +File: /usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.opt-1.pyc 100644 root:root cb1e2e630f91541fa755d095470cced5 +File: /usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.opt-2.pyc 100644 root:root 468e9f5015b2fa52c4fe18f9f6839dff +File: /usr/lib64/python3/site-packages/__pycache__/vismach.cpython-312.pyc 100644 root:root cb1e2e630f91541fa755d095470cced5 File: /usr/lib64/python3/site-packages/_hal.so 100644 root:root b52a25b80c03fb061bd05088000bf14d @@ -7458,5 +7458,5 @@ File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.pyc 100644 root:root d20a65a67c68acc20e2fc8501ad87172 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-1.pyc 100644 root:root 71c0f2f397343d3b138cc9f4de7a82df -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-2.pyc 100644 root:root d491f293c366103ac33780622b380c5a -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.pyc 100644 root:root 71c0f2f397343d3b138cc9f4de7a82df +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-1.pyc 100644 root:root 1fddc11d66f967089ab8a884a8e29a52 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-2.pyc 100644 root:root f89b08dd4759a5211c8703bd51c787de +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.pyc 100644 root:root 1fddc11d66f967089ab8a884a8e29a52 File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc 100644 root:root 787faa0e39b14868e035ccdc735bdaf0 @@ -7464,5 +7464,5 @@ File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/core.cpython-312.pyc 100644 root:root 787faa0e39b14868e035ccdc735bdaf0 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc 100644 root:root 17f5bdfd275aeae03462e0604fc24b33 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-2.pyc 100644 root:root 17f5bdfd275aeae03462e0604fc24b33 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.pyc 100644 root:root 17f5bdfd275aeae03462e0604fc24b33 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc 100644 root:root dd6b87645c16a0a9f319360efebb0518 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-2.pyc 100644 root:root dd6b87645c16a0a9f319360efebb0518 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.pyc 100644 root:root dd6b87645c16a0a9f319360efebb0518 File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.opt-1.pyc 100644 root:root f70a1029d4c8117c7a055de45116db39 @@ -7482,8 +7482,8 @@ File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.pyc 100644 root:root d095e6ecc646bc948771b41d3c570412 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc 100644 root:root 7bfabcfbc8e607d908c033fe81d61459 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-2.pyc 100644 root:root 7bfabcfbc8e607d908c033fe81d61459 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.pyc 100644 root:root 7bfabcfbc8e607d908c033fe81d61459 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc 100644 root:root 2247be73e1aa5ff47cb31e297b722837 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-2.pyc 100644 root:root 2247be73e1aa5ff47cb31e297b722837 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.pyc 100644 root:root 2247be73e1aa5ff47cb31e297b722837 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc 100644 root:root 5f910d54e4ab4951b184a7490c4de235 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-2.pyc 100644 root:root 5f910d54e4ab4951b184a7490c4de235 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.pyc 100644 root:root 5f910d54e4ab4951b184a7490c4de235 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc 100644 root:root a154a1c59927b7b74d1ef9c5639a3138 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-2.pyc 100644 root:root a154a1c59927b7b74d1ef9c5639a3138 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.pyc 100644 root:root a154a1c59927b7b74d1ef9c5639a3138 File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.opt-1.pyc 100644 root:root b2d09df97552fe7308f2ad82fd93216a @@ -7524,5 +7524,5 @@ File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/led.cpython-312.pyc 100644 root:root 7d7943c0683d00096e5e8b4793b8ea8d -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc 100644 root:root 8fb92e35e7b30a85f1555563803cbedd -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-2.pyc 100644 root:root 8fb92e35e7b30a85f1555563803cbedd -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.pyc 100644 root:root 8fb92e35e7b30a85f1555563803cbedd +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc 100644 root:root 1d5a6a7af43c29f1b75c7c1a6141e655 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-2.pyc 100644 root:root 1d5a6a7af43c29f1b75c7c1a6141e655 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.pyc 100644 root:root 1d5a6a7af43c29f1b75c7c1a6141e655 File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc 100644 root:root 9b64af301dfebf62f57c0e60f304ca9d @@ -7530,5 +7530,5 @@ File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.pyc 100644 root:root 9b64af301dfebf62f57c0e60f304ca9d -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc 100644 root:root 459d9d43986616ed3553bd4d21b26768 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-2.pyc 100644 root:root 459d9d43986616ed3553bd4d21b26768 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.pyc 100644 root:root 459d9d43986616ed3553bd4d21b26768 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc 100644 root:root 764195e2d82ecc4ebf5c81b9d5432193 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-2.pyc 100644 root:root 764195e2d82ecc4ebf5c81b9d5432193 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.pyc 100644 root:root 764195e2d82ecc4ebf5c81b9d5432193 File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc 100644 root:root c08e7e38ff595be61767b8834a956156 @@ -7551,5 +7551,5 @@ File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.pyc 100644 root:root 4f6ecd4ae5ae52341afe05557988c897 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc 100644 root:root 8c6f0fe26f95994772e3d54bda50f06a -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-2.pyc 100644 root:root 44395b3d843579271b32b6f88f00aec9 -File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.pyc 100644 root:root 8c6f0fe26f95994772e3d54bda50f06a +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc 100644 root:root 8c66e6591af75733052c2a125a68790e +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-2.pyc 100644 root:root db2b273c1dacababdf913b20607fcd92 +File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.pyc 100644 root:root 8c66e6591af75733052c2a125a68790e File: /usr/lib64/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.opt-1.pyc 100644 root:root 552a7538e5217d9fbb2b6958475a09ba @@ -7611,5 +7611,5 @@ File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.pyc 100644 root:root 4957d89265fca03dffae88da9d2f7537 -File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-1.pyc 100644 root:root 971b0e6ee9f5f0f018572bb60ea43158 -File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-2.pyc 100644 root:root 231ead3b490ce8a4e814c46d094f3670 -File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.pyc 100644 root:root 971b0e6ee9f5f0f018572bb60ea43158 +File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-1.pyc 100644 root:root 78192404d4db36489593a348c6e7897c +File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-2.pyc 100644 root:root 115641ea754a5bd16d38a17f4df75fe3 +File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.pyc 100644 root:root 78192404d4db36489593a348c6e7897c File: /usr/lib64/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.opt-1.pyc 100644 root:root 6e4a236e11a9b1157ed9fdea6f844166 @@ -7647,5 +7647,5 @@ File: /usr/lib64/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.pyc 100644 root:root 061fe55aad0b20256b0924a017dd17bb -File: /usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc 100644 root:root c81b82c4b60b5db0d0ebe3502208ccd2 -File: /usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-2.pyc 100644 root:root c81b82c4b60b5db0d0ebe3502208ccd2 -File: /usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.pyc 100644 root:root c81b82c4b60b5db0d0ebe3502208ccd2 +File: /usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc 100644 root:root 832f58f6841fbfa52a22a02b6d28ad53 +File: /usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-2.pyc 100644 root:root 832f58f6841fbfa52a22a02b6d28ad53 +File: /usr/lib64/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.pyc 100644 root:root 832f58f6841fbfa52a22a02b6d28ad53 File: /usr/lib64/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc 100644 root:root 7c59fa8dcd3eeb739bc3ee550598e7db @@ -7683,5 +7683,5 @@ File: /usr/lib64/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.pyc 100644 root:root e404a92377ae95f3f75af2b364d368c0 -File: /usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-1.pyc 100644 root:root 8a1a5431a31ccad7f370a3633431b3b7 -File: /usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-2.pyc 100644 root:root 37e867297c7009148932b412e76f7802 -File: /usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.pyc 100644 root:root 8a1a5431a31ccad7f370a3633431b3b7 +File: /usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-1.pyc 100644 root:root e59c0fd4a3f09a23d4a120cf1142a00f +File: /usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-2.pyc 100644 root:root afe409fa0ba89bf0c17beabc286e7dd2 +File: /usr/lib64/python3/site-packages/plasmac/__pycache__/line.cpython-312.pyc 100644 root:root e59c0fd4a3f09a23d4a120cf1142a00f File: /usr/lib64/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.opt-1.pyc 100644 root:root f93e0a4f75914981ba7c9ac853c90e91 @@ -7692,5 +7692,5 @@ File: /usr/lib64/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.pyc 100644 root:root d7b949ce8132c934bbf6867afa1826b1 -File: /usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-1.pyc 100644 root:root 9828a11360a5f3777790d978f6a7c5a6 -File: /usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-2.pyc 100644 root:root f95027d1450d46a0bf14211832a9c4ff -File: /usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.pyc 100644 root:root 9828a11360a5f3777790d978f6a7c5a6 +File: /usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-1.pyc 100644 root:root 556693b7c45d3062809c3c2e2f28277d +File: /usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-2.pyc 100644 root:root 52959f491060424855809ab6e0f16dad +File: /usr/lib64/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.pyc 100644 root:root 556693b7c45d3062809c3c2e2f28277d File: /usr/lib64/python3/site-packages/plasmac/__pycache__/sector.cpython-312.opt-1.pyc 100644 root:root e0fe7185cc886496a87043e87e19e5d6 @@ -7735,5 +7735,5 @@ File: /usr/lib64/python3/site-packages/pncconf/__pycache__/data.cpython-312.pyc 100644 root:root 0379b1051600ba4f906a1c07fd848aa7 -File: /usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc 100644 root:root a92f6a471958d010e85ec3d2d3d3020d -File: /usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-2.pyc 100644 root:root a92f6a471958d010e85ec3d2d3d3020d -File: /usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.pyc 100644 root:root a92f6a471958d010e85ec3d2d3d3020d +File: /usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc 100644 root:root 0d560aa9d350e8688f42b2d9a4259c69 +File: /usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-2.pyc 100644 root:root 0d560aa9d350e8688f42b2d9a4259c69 +File: /usr/lib64/python3/site-packages/pncconf/__pycache__/pages.cpython-312.pyc 100644 root:root 0d560aa9d350e8688f42b2d9a4259c69 File: /usr/lib64/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc 100644 root:root 08976c5fa87347df1c11a04e27057aa4 @@ -7760,5 +7760,5 @@ File: /usr/lib64/python3/site-packages/pyui/__pycache__/__init__.cpython-312.pyc 100644 root:root 0ab2555cce075113278b0e21805ab0b0 -File: /usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc 100644 root:root 16d96754beebe1b0cba797574b9960f6 -File: /usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-2.pyc 100644 root:root 16d96754beebe1b0cba797574b9960f6 -File: /usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.pyc 100644 root:root 16d96754beebe1b0cba797574b9960f6 +File: /usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc 100644 root:root e3f71d101c63e385b68f4fd83e46fc23 +File: /usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-2.pyc 100644 root:root e3f71d101c63e385b68f4fd83e46fc23 +File: /usr/lib64/python3/site-packages/pyui/__pycache__/commands.cpython-312.pyc 100644 root:root e3f71d101c63e385b68f4fd83e46fc23 File: /usr/lib64/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc 100644 root:root 09a29ac9df1df98bc5d288209a001c1f @@ -7788,5 +7788,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/core.cpython-312.pyc 100644 root:root 38a2d25527e2137b99b1843904c79f37 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc 100644 root:root 3e8ccc0fa9d5459ab0ff8c4eed3f6163 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-2.pyc 100644 root:root 3e8ccc0fa9d5459ab0ff8c4eed3f6163 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.pyc 100644 root:root 3e8ccc0fa9d5459ab0ff8c4eed3f6163 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc 100644 root:root 08f7eebc5e38930bcddf37c540289507 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-2.pyc 100644 root:root 08f7eebc5e38930bcddf37c540289507 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.pyc 100644 root:root 08f7eebc5e38930bcddf37c540289507 File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc 100644 root:root d632dfe38b7e446d4d2d55078f158a07 @@ -7794,8 +7794,8 @@ File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.pyc 100644 root:root d632dfe38b7e446d4d2d55078f158a07 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc 100644 root:root 7f2d3c5a7b51e56c4f808ea453a413d4 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-2.pyc 100644 root:root 7f2d3c5a7b51e56c4f808ea453a413d4 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.pyc 100644 root:root 7f2d3c5a7b51e56c4f808ea453a413d4 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc 100644 root:root e83ff758d3c9c20e3e8c48ad72787129 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-2.pyc 100644 root:root e83ff758d3c9c20e3e8c48ad72787129 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.pyc 100644 root:root e83ff758d3c9c20e3e8c48ad72787129 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc 100644 root:root d8bdb0abf4104574ada5fb5bc7d34dda +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-2.pyc 100644 root:root d8bdb0abf4104574ada5fb5bc7d34dda +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.pyc 100644 root:root d8bdb0abf4104574ada5fb5bc7d34dda +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc 100644 root:root 6b03617bdaf7d62121a06ea3f3180ae6 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-2.pyc 100644 root:root 6b03617bdaf7d62121a06ea3f3180ae6 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.pyc 100644 root:root 6b03617bdaf7d62121a06ea3f3180ae6 File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc 100644 root:root 643b2d6e0eee3361406ddc94e93a62d3 @@ -7806,5 +7806,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.pyc 100644 root:root 5085b7b503865b7cdd8f7477189ebdb4 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc 100644 root:root f080062d288fbd54536cc18fc46ea096 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-2.pyc 100644 root:root f080062d288fbd54536cc18fc46ea096 -File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.pyc 100644 root:root f080062d288fbd54536cc18fc46ea096 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc 100644 root:root 53792a27e9d901f213b515b675f144c5 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-2.pyc 100644 root:root 53792a27e9d901f213b515b675f144c5 +File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.pyc 100644 root:root 53792a27e9d901f213b515b675f144c5 File: /usr/lib64/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc 100644 root:root 61e8bacf932def1cc47fac3e51a55044 @@ -7864,5 +7864,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__ 40755 root:root -File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc 100644 root:root f4bb039b23c516f0a1e90998dab2cc78 -File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-2.pyc 100644 root:root f4bb039b23c516f0a1e90998dab2cc78 -File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.pyc 100644 root:root f4bb039b23c516f0a1e90998dab2cc78 +File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc 100644 root:root 483df282ccd74b2cef6d12f0d73c6cf1 +File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-2.pyc 100644 root:root 483df282ccd74b2cef6d12f0d73c6cf1 +File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.pyc 100644 root:root 483df282ccd74b2cef6d12f0d73c6cf1 File: /usr/lib64/python3/site-packages/qtvcp/lib/auto_height/auto_height.py 100644 root:root d5605d44b5a9115343714ada4eba9479 @@ -7886,5 +7886,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.pyc 100644 root:root 22b5d8eb0e99018a22cff596a2da6e15 -File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc 100644 root:root a78e3825ffffbf2ebb42a3e0a6029551 -File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-2.pyc 100644 root:root a78e3825ffffbf2ebb42a3e0a6029551 -File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.pyc 100644 root:root a78e3825ffffbf2ebb42a3e0a6029551 +File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc 100644 root:root 5b07895399c0df25e94a06b3ebbdd3c8 +File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-2.pyc 100644 root:root 5b07895399c0df25e94a06b3ebbdd3c8 +File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.pyc 100644 root:root 5b07895399c0df25e94a06b3ebbdd3c8 File: /usr/lib64/python3/site-packages/qtvcp/lib/gcode_utility/facing.py 100644 root:root d99ab227ebb1fca11ea995c50602ad7f @@ -7928,5 +7928,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.pyc 100644 root:root 4250b9d68b6e8812af573f5135f2691b -File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-1.pyc 100644 root:root d453e6ff83e2e18fb1f547725fa0cc23 -File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-2.pyc 100644 root:root 655fcac18361e8f5a29b7e853b13347e -File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.pyc 100644 root:root d453e6ff83e2e18fb1f547725fa0cc23 +File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-1.pyc 100644 root:root f5f577251fca8f293a2315551806f618 +File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-2.pyc 100644 root:root 7e9ddbac36390336470bba5845a70f86 +File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.pyc 100644 root:root f5f577251fca8f293a2315551806f618 File: /usr/lib64/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.opt-1.pyc 100644 root:root a1ad2ac24c0f096a656d35b2394f7de0 @@ -7997,5 +7997,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.pyc 100644 root:root 962843ec65c1f3e03824cfdb120d8dcc -File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-1.pyc 100644 root:root 77b895596f4a33e5efb1dc609c21be5b -File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-2.pyc 100644 root:root 0dfe4311356d2cc2f1839ec80b47b847 -File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.pyc 100644 root:root 77b895596f4a33e5efb1dc609c21be5b +File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-1.pyc 100644 root:root d779454534dae919f147bd1483209c1b +File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-2.pyc 100644 root:root 36430017e3ead6e635fd57562976b5ee +File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.pyc 100644 root:root d779454534dae919f147bd1483209c1b File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.opt-1.pyc 100644 root:root 705b264b3b71f1d7ac8a7b73d01ac164 @@ -8006,5 +8006,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.pyc 100644 root:root cd1574b65fefd7846fe9f215457d1604 -File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-1.pyc 100644 root:root 90795699923bf8a7bb534fdd727320fc -File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-2.pyc 100644 root:root 21cf85519e96ae15989f4683dcd00bf3 -File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.pyc 100644 root:root 90795699923bf8a7bb534fdd727320fc +File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-1.pyc 100644 root:root b19b9d16497e1db0d85a25993c8b6df0 +File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-2.pyc 100644 root:root ee95536b505b6dc8b9481b56ca13bcdd +File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.pyc 100644 root:root b19b9d16497e1db0d85a25993c8b6df0 File: /usr/lib64/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py 100644 root:root 34974d5758240ee08c2a5079af78f7c4 @@ -8221,5 +8221,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.pyc 100644 root:root 0c7da3f2c6615d0919de937288009739 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc 100644 root:root dc4546736a2cfe81853b6382537b5966 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-2.pyc 100644 root:root dc4546736a2cfe81853b6382537b5966 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.pyc 100644 root:root dc4546736a2cfe81853b6382537b5966 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc 100644 root:root b7f390350a954ed5646d7dd3779d0e6a +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-2.pyc 100644 root:root b7f390350a954ed5646d7dd3779d0e6a +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.pyc 100644 root:root b7f390350a954ed5646d7dd3779d0e6a File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc 100644 root:root 058aa511793f018ab50a79392cb5ebbd @@ -8254,5 +8254,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.pyc 100644 root:root e35e8dba2feb2f007d1a3bd453769cdf -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-1.pyc 100644 root:root 3de1888ac476fbab575f8ac7f0c30fad -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-2.pyc 100644 root:root 3843503fda19960c8e8893f84b967d53 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.pyc 100644 root:root 3de1888ac476fbab575f8ac7f0c30fad +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-1.pyc 100644 root:root f5615b30a863e1d75772b057fbe39bfa +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-2.pyc 100644 root:root 14b14e0d8ffaa51f90e32ca0004dda8f +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.pyc 100644 root:root f5615b30a863e1d75772b057fbe39bfa File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.opt-1.pyc 100644 root:root d9b1492b5e21be7697cf925495be077a @@ -8290,8 +8290,8 @@ File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.pyc 100644 root:root b53305880a45f6fed7e8169a4cb596bb -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc 100644 root:root 5612e125f52c31df9e67d8544806c551 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-2.pyc 100644 root:root 5612e125f52c31df9e67d8544806c551 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.pyc 100644 root:root 5612e125f52c31df9e67d8544806c551 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc 100644 root:root 4abc2a718dfbfb4a5e5fd3e2707ef565 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-2.pyc 100644 root:root 4abc2a718dfbfb4a5e5fd3e2707ef565 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.pyc 100644 root:root 4abc2a718dfbfb4a5e5fd3e2707ef565 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc 100644 root:root 027c3badcd03661a28b03c29eefb0ab6 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-2.pyc 100644 root:root 027c3badcd03661a28b03c29eefb0ab6 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.pyc 100644 root:root 027c3badcd03661a28b03c29eefb0ab6 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc 100644 root:root f2d3934461e4a4b162e20404366b61c9 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-2.pyc 100644 root:root f2d3934461e4a4b162e20404366b61c9 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.pyc 100644 root:root f2d3934461e4a4b162e20404366b61c9 File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc 100644 root:root 85c2bdf29be40c153214148491f02a18 @@ -8299,5 +8299,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.pyc 100644 root:root 85c2bdf29be40c153214148491f02a18 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc 100644 root:root 6fe3c6e5005f6a8c0c02604b3da48e4f -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-2.pyc 100644 root:root 6fe3c6e5005f6a8c0c02604b3da48e4f -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.pyc 100644 root:root 6fe3c6e5005f6a8c0c02604b3da48e4f +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc 100644 root:root e38e587dea5a6121e4ed82b1c7129fcb +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-2.pyc 100644 root:root e38e587dea5a6121e4ed82b1c7129fcb +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.pyc 100644 root:root e38e587dea5a6121e4ed82b1c7129fcb File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc 100644 root:root fd67877e81e7ef4b62ec7f5cd3a01903 @@ -8326,5 +8326,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.pyc 100644 root:root 6a2127bb532664d3df7d8dc79d9752da -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-1.pyc 100644 root:root 7434f3e8af3e3681dad5fd13d742a334 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-2.pyc 100644 root:root d81315e5ff21991ee46ea23773b90372 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.pyc 100644 root:root 7434f3e8af3e3681dad5fd13d742a334 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-1.pyc 100644 root:root 2439bcbaab2a0c4bcf7bc2e567aa498c +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-2.pyc 100644 root:root bb04b7c744e8464d9850b47ed2ff75a1 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.pyc 100644 root:root 2439bcbaab2a0c4bcf7bc2e567aa498c File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc 100644 root:root b37d821d0adfbb8835f53c6b1d7d4e55 @@ -8359,5 +8359,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.pyc 100644 root:root 0581824e0757e8230e86eebad0797f64 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc 100644 root:root 058f36062b19b72791852cbc64a52344 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-2.pyc 100644 root:root 058f36062b19b72791852cbc64a52344 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.pyc 100644 root:root 058f36062b19b72791852cbc64a52344 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc 100644 root:root 70b3ac7848b271280b49ce0b478c1ef9 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-2.pyc 100644 root:root 70b3ac7848b271280b49ce0b478c1ef9 +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.pyc 100644 root:root 70b3ac7848b271280b49ce0b478c1ef9 File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc 100644 root:root 45ff8335e33f16d88c7eb1d3fc3af864 @@ -8374,5 +8374,5 @@ File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.pyc 100644 root:root 871089476eb564a7f081ad4e8b914b43 -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc 100644 root:root dd7d3bec5ca4570ad8acf1f2ab4448df -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-2.pyc 100644 root:root dd7d3bec5ca4570ad8acf1f2ab4448df -File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.pyc 100644 root:root dd7d3bec5ca4570ad8acf1f2ab4448df +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc 100644 root:root 83b9eaeb31dd36106b0ea0a0805516cd +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-2.pyc 100644 root:root 83b9eaeb31dd36106b0ea0a0805516cd +File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.pyc 100644 root:root 83b9eaeb31dd36106b0ea0a0805516cd File: /usr/lib64/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc 100644 root:root 9ae28a35439db3389defffbd8feb05be @@ -8510,5 +8510,5 @@ File: /usr/lib64/python3/site-packages/rs274/__pycache__/author.cpython-312.pyc 100644 root:root 54b13b436bd1a6bda88b5cc2aee08715 -File: /usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc 100644 root:root b2b90f62bca3f080a8f0dd190c36596a -File: /usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-2.pyc 100644 root:root b2b90f62bca3f080a8f0dd190c36596a -File: /usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.pyc 100644 root:root b2b90f62bca3f080a8f0dd190c36596a +File: /usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc 100644 root:root 0205d40df91cb35d353c9db71b16f476 +File: /usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-2.pyc 100644 root:root 0205d40df91cb35d353c9db71b16f476 +File: /usr/lib64/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.pyc 100644 root:root 0205d40df91cb35d353c9db71b16f476 File: /usr/lib64/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc 100644 root:root cb51e36ae901160782d6953ae04c4c0d @@ -8538,5 +8538,5 @@ File: /usr/lib64/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.pyc 100644 root:root 22e23eff152cda36b9d97d04de908df6 -File: /usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc 100644 root:root 682e5d24f097dec1213579096d559f6c -File: /usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-2.pyc 100644 root:root 682e5d24f097dec1213579096d559f6c -File: /usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.pyc 100644 root:root 682e5d24f097dec1213579096d559f6c +File: /usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc 100644 root:root f8790b9bdd9acd174ca7200bb2b371fc +File: /usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-2.pyc 100644 root:root f8790b9bdd9acd174ca7200bb2b371fc +File: /usr/lib64/python3/site-packages/stepconf/__pycache__/pages.cpython-312.pyc 100644 root:root f8790b9bdd9acd174ca7200bb2b371fc File: /usr/lib64/python3/site-packages/stepconf/build_HAL.py 100644 root:root e7e559e6a4f99b20fc46e6c0e8e3ea9c @@ -8555,5 +8555,5 @@ File: /usr/lib64/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.pyc 100644 root:root eaae3a9c22831edce3d90ec4d612b756 -File: /usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc 100644 root:root 4ac29856bbf2dc68ba5b2f4b83e335cb -File: /usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-2.pyc 100644 root:root 4ac29856bbf2dc68ba5b2f4b83e335cb -File: /usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.pyc 100644 root:root 4ac29856bbf2dc68ba5b2f4b83e335cb +File: /usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc 100644 root:root 862fb23fd08b11827b09e3b14c2551cf +File: /usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-2.pyc 100644 root:root 862fb23fd08b11827b09e3b14c2551cf +File: /usr/lib64/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.pyc 100644 root:root 862fb23fd08b11827b09e3b14c2551cf File: /usr/lib64/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc 100644 root:root 29385f7f3890e9ffea04d17ca6284de6 @@ -8564,5 +8564,5 @@ File: /usr/lib64/python3/site-packages/touchy/__pycache__/listing.cpython-312.pyc 100644 root:root 1bfc858aac59ce32cf7c8539978e4748 -File: /usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc 100644 root:root 359b5c87a98dd4b3f0b03bfc01e56843 -File: /usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-2.pyc 100644 root:root 359b5c87a98dd4b3f0b03bfc01e56843 -File: /usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.pyc 100644 root:root 359b5c87a98dd4b3f0b03bfc01e56843 +File: /usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc 100644 root:root db1e57fd1b3782728139cdeaa3e31963 +File: /usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-2.pyc 100644 root:root db1e57fd1b3782728139cdeaa3e31963 +File: /usr/lib64/python3/site-packages/touchy/__pycache__/mdi.cpython-312.pyc 100644 root:root db1e57fd1b3782728139cdeaa3e31963 File: /usr/lib64/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc 100644 root:root 83e68d04019da156b290d4f9e967c096 @@ -11957,5 +11957,5 @@ File: /usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.pyc 100644 root:root 23b685c74611cb9fe2666f6d7b621993 -File: /usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc 100644 root:root c84848ad17da8657cf287642cf96159f -File: /usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-2.pyc 100644 root:root c84848ad17da8657cf287642cf96159f -File: /usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.pyc 100644 root:root c84848ad17da8657cf287642cf96159f +File: /usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc 100644 root:root 997183dd804a4c3253f2efbf25a6dec1 +File: /usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-2.pyc 100644 root:root 997183dd804a4c3253f2efbf25a6dec1 +File: /usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.pyc 100644 root:root 997183dd804a4c3253f2efbf25a6dec1 File: /usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc 100644 root:root 0422e49619f28af3b9ad0b9a3371a032 @@ -12381,3 +12381,3 @@ File: /usr/share/man/man1/panelui.1.xz 100644 root:root 61f547f5665fc80d03da476743e17d4d -File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root b4ff0055709b97e49988924f009be828 +File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 62b56e244800ab7074608ba68abb499e File: /usr/share/man/man1/pmx485-test.1.xz 100644 root:root 20b815b28f4df48358282e8d88b3a0fa @@ -12412,3 +12412,3 @@ File: /usr/share/man/man1/teach-in.1.xz 100644 root:root fc226b9d2b564e3fad4c5ff0b945c813 -File: /usr/share/man/man1/thermistor.1.xz 100644 root:root c042d11825f669c9e535c2070d3fcc76 +File: /usr/share/man/man1/thermistor.1.xz 100644 root:root c8b315d2d95812f18c054190fb915544 File: /usr/share/man/man1/tool_mmap_read.1.xz 100644 root:root 404e1ab5ac16059988dfc7e8d0bea311 @@ -12420,3 +12420,3 @@ File: /usr/share/man/man1/vfs11_vfd.1.xz 100644 root:root 65395473fdddbe5a7f8789b49d8b6b37 -File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root 65e7711c7e568052ae098b2dc6763bc6 +File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root 5f5c714402a161e58db843b077a15f0a File: /usr/share/man/man1/xhc-hb04-accels.1.xz 100644 root:root 0cff8637e027604edb6d81ff9beaa4ff @@ -12542,44 +12542,44 @@ File: /usr/share/man/man3/undocumented.3rtapi.xz 100644 root:root 002b721b89292b438d9dbf89f1ff823b -File: /usr/share/man/man9/abs.9.xz 100644 root:root 69aed91a87c27c8bb845a42abb3075dd -File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root b6c77174d95e0285f1837871795d9bc0 -File: /usr/share/man/man9/and2.9.xz 100644 root:root 4867617991b7f687dff8d70f06696937 -File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 82e620a0fe72edb27cf41db38c76e60c +File: /usr/share/man/man9/abs.9.xz 100644 root:root 9f1251dca63eb388ffbb7e1e13ffca9a +File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root 8b4b2d07d18eb6380557a313ced3ab09 +File: /usr/share/man/man9/and2.9.xz 100644 root:root d1833aca3b5a6acaf50be10c03ec39ee +File: /usr/share/man/man9/anglejog.9.xz 100644 root:root ed8675cbd6a9806f094be3bb0a9e9fdf File: /usr/share/man/man9/at_pid.9.xz 100644 root:root d578fa506b91fa3aa94136679b39f656 File: /usr/share/man/man9/axis.9.xz 100644 root:root f688c161a447b4d64af5406eaa4b3c09 -File: /usr/share/man/man9/axistest.9.xz 100644 root:root a7aaa4dc1ca73fcd3e61037803e8f8e0 -File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 350391867943de0dc69968b4d3a29bbb -File: /usr/share/man/man9/biquad.9.xz 100644 root:root d8c21583c5526df5ebd7397d9baf5445 -File: /usr/share/man/man9/bitslice.9.xz 100644 root:root e271430bfcc303cdf6f73e745096d6dc -File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 5abf3ca1004b3258955c30e3c8b1b037 -File: /usr/share/man/man9/bldc.9.xz 100644 root:root 131238779bee5c8e819f2dd11d7ff2f0 -File: /usr/share/man/man9/blend.9.xz 100644 root:root bd9f64249ea3c0e375b526ad1696f2cd -File: /usr/share/man/man9/carousel.9.xz 100644 root:root e8941e5276fac0270510fca50f01ac5b -File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root 20df8bd27be6b6f5f0821330c1b09160 -File: /usr/share/man/man9/clarke2.9.xz 100644 root:root 78e30fd1adf6fccb015cd3f09e882a74 -File: /usr/share/man/man9/clarke3.9.xz 100644 root:root 9d442d88daf0188176376f6ede960702 -File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root df9c25f28e68ae5883740198e75d6c86 +File: /usr/share/man/man9/axistest.9.xz 100644 root:root eb9232022d4c9b00665980f08828b002 +File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 045f93905014750cb3626747042dd54b +File: /usr/share/man/man9/biquad.9.xz 100644 root:root 623117d6ec115d119c1ad4c869a0ed43 +File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 1151e2edf3bee914b3b58208db173253 +File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 5cb2ac922a9b5c6e8ba5788dd36f8c4d +File: /usr/share/man/man9/bldc.9.xz 100644 root:root e18c20f5dbfac889455cf6e989e8b8f0 +File: /usr/share/man/man9/blend.9.xz 100644 root:root acaef7f22667588c3b99e3dec4c405ee +File: /usr/share/man/man9/carousel.9.xz 100644 root:root 8ef09b19b213edc2edb6bd8b30b2595b +File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root 9c44f4ad496cf56b24584741ba8dbd6a +File: /usr/share/man/man9/clarke2.9.xz 100644 root:root d83eb896c6cd4a622dcd2c013cd673aa +File: /usr/share/man/man9/clarke3.9.xz 100644 root:root c8927eb76267f1fe2a6dfb1857b9010b +File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 01912823adcb789d4edf5bb3122e819e File: /usr/share/man/man9/classicladder.9.xz 100644 root:root 0a15b834496451ff9a41f7297f36b0f0 -File: /usr/share/man/man9/comp.9.xz 100644 root:root 93f4c154ecf6098a86692f80c7777097 -File: /usr/share/man/man9/constant.9.xz 100644 root:root 080b5a38ba028ab199687613aee435cb -File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root ef7d40e31272d49ebd99a91a04e69166 -File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root 41d506a410016c457858219fd14d323c -File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 0d9c87dd3e5a71c79725b444f4d46bd7 -File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 668d0dc6426b1553fdf23555c66bcb11 -File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root 43a86fe70159073f51c8a7c9a23c70b3 -File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 719212159608704ebfebe9653631c7c7 -File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root f156ab2af57e1eac7c451fc157004f02 -File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 8743de7081f6ccb39702233b16c7fd79 -File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root b5cc5a686e974abb38db7a0174033a81 -File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 407743e29faab665ad8383f1a3162ac6 -File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 8d3a4b1ab4628cce14ba43f933ae7ab4 -File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root ece03a523ee03a438ef3908500a0974e +File: /usr/share/man/man9/comp.9.xz 100644 root:root c7bbbb870f8e00095c98046f5f6a6acd +File: /usr/share/man/man9/constant.9.xz 100644 root:root b02ed8b2eda92e7f581ce4a6890b1f39 +File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root db7325ee5fc644a172e9ca82e8640679 +File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root d43790172cebb9ab22ca2ff964344df9 +File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root f6c57f29d7e1ea2662a8ca4afba9bb79 +File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root f6f1172490d5dd81e798adff793d7de2 +File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root d8545e62e3f64dd75e9886005f173325 +File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root f2f3940c6246d3739d42f0d205c181cf +File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root b72c93fc8a387220ac85c0ee7842e577 +File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 64f3b796120d4e4a725a2f3d3de91efc +File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root 5109966a6b7cdba0f9411aea00eceba1 +File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 4aa97b0bcad577c0cc12df6b4cfbc381 +File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root a1bcfc71e82716528cf73ba57f559e8e +File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root 526589607a93bc5300d76dc1eb84027c File: /usr/share/man/man9/counter.9.xz 100644 root:root 83f81a48047a93aac54a70c298a8b8ee -File: /usr/share/man/man9/dbounce.9.xz 100644 root:root ba1968d7b63fbf291f94254a545d4a53 -File: /usr/share/man/man9/ddt.9.xz 100644 root:root ca1c38a6d50ead10fa1378655a3ac52c -File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 5f22396fda645943aa201937a91447cd +File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 8a43eaf91eaae20385b3f614cea7e879 +File: /usr/share/man/man9/ddt.9.xz 100644 root:root c43438a2c5ff44e98f14305cf41fc122 +File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 50498fc78bb7eda972247c97cbf4772b File: /usr/share/man/man9/debounce.9.xz 100644 root:root bd2406b69a89bf1c3ef92b42bfe93f3d -File: /usr/share/man/man9/demux.9.xz 100644 root:root e28f72dd1d4e39ec4464203ad5a28266 -File: /usr/share/man/man9/differential.9.xz 100644 root:root 4a27700b7920af8e74b1cd0af2879b4c -File: /usr/share/man/man9/div2.9.xz 100644 root:root 6be4cf720dbfb552a4349b5713713e4e -File: /usr/share/man/man9/edge.9.xz 100644 root:root 23e49adbb65ace5ddfb51b53454af37b +File: /usr/share/man/man9/demux.9.xz 100644 root:root fbc6ecde613e01d8bb574b5729ef111a +File: /usr/share/man/man9/differential.9.xz 100644 root:root ba05660d8ca5f100bee845afbebc12b8 +File: /usr/share/man/man9/div2.9.xz 100644 root:root 71011102a6cfc697eb068c8e8ecf0f3b +File: /usr/share/man/man9/edge.9.xz 100644 root:root 68abb0e0e878679b1be68da49b999342 File: /usr/share/man/man9/encoder.9.xz 100644 root:root 12631bc793eb57261edeccfb1868447a @@ -12587,10 +12587,10 @@ File: /usr/share/man/man9/enum.9.xz 100644 root:root 1ce84e12285a2f9b34c68288caf6efdc -File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 0f6b3da3c4fbbef6da90a7424954380f -File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 27801fab106cf7294e3772088f716e0f -File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 7e33bd6600bae13eca2e36be60214947 -File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 3bd313d4baad22fb451238dfed31e51c -File: /usr/share/man/man9/flipflop.9.xz 100644 root:root a26dadfd32cc36003296ff087d8b0e76 -File: /usr/share/man/man9/gantry.9.xz 100644 root:root 8cd840a99eee75bd26b60f2be5afbc43 +File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 57cf8f62e7488a5b841932fc37ed1578 +File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 6341b7e455a5c3744d435d900adf712c +File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 3569c6d2394e8f5aa8a697a0d0fb5b2e +File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 8b6951928d42b724431d6db1116f0337 +File: /usr/share/man/man9/flipflop.9.xz 100644 root:root 01f28e4143ca6acb7207eb3c04cb0068 +File: /usr/share/man/man9/gantry.9.xz 100644 root:root d0e8614adca1d3592c83aeaced7155ac File: /usr/share/man/man9/gantrykins.9.xz 100644 root:root a388b2c041c10d2e154213b6a190d69e -File: /usr/share/man/man9/gearchange.9.xz 100644 root:root d3b6b31f938480f3f6518e1e887be69e +File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 756a69bac0442af0c7386b8fdce88d3d File: /usr/share/man/man9/genhexkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12599,6 +12599,6 @@ File: /usr/share/man/man9/gladevcp.9.xz 100644 root:root 26d85cce38cef8e5cee1a6845d897b4d -File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 75cfd88d717029d52808d08d98b88cb2 +File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 810ba09d4b9c42688f34757c9af3e105 File: /usr/share/man/man9/hal_bb_gpio.9.xz 100644 root:root b8610c3245eb6a6a34b2071dae79effe File: /usr/share/man/man9/hal_parport.9.xz 100644 root:root 0e9862dfa7a66f23eff384631bc10a25 -File: /usr/share/man/man9/histobins.9.xz 100644 root:root 9bb5504319d17c1b8db8e6fc5bc299a5 +File: /usr/share/man/man9/histobins.9.xz 100644 root:root a2e9ba8ad64eb2d3094a6e32b5a3839d File: /usr/share/man/man9/hm2_7i43.9.xz 100644 root:root ec628cb4aadd965825a78075995c1e2e @@ -12609,54 +12609,54 @@ File: /usr/share/man/man9/hm2_spi.9.xz 100644 root:root 382b4ac9c860f7945c061b1e9bd15cdf -File: /usr/share/man/man9/homecomp.9.xz 100644 root:root d572d63c2472f1198f978f2c63dc2b71 +File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 9bbc6096d432949321b881a8737f7195 File: /usr/share/man/man9/hostmot2.9.xz 100644 root:root 4c9889068227e9adbccc90829cde9da3 -File: /usr/share/man/man9/hypot.9.xz 100644 root:root bea1119463a52cd12a91f4d4b72a2cda -File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 81cc9f0a928f97a0bbea9aa2fb2c3888 -File: /usr/share/man/man9/integ.9.xz 100644 root:root 0fdb7c86884700a5872f1dfdb0f81d50 -File: /usr/share/man/man9/invert.9.xz 100644 root:root 6ec8e956b8f90f0cc60e3f3f6c50093c -File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root 30f3eb22365cb0f3a9f1f91a5a044134 +File: /usr/share/man/man9/hypot.9.xz 100644 root:root cc7d4940ef2afa01e6ae26e832646cec +File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root f7e67c11b981307a9787a8449368dcd3 +File: /usr/share/man/man9/integ.9.xz 100644 root:root 37b0f4286626279052982ee18b5040e4 +File: /usr/share/man/man9/invert.9.xz 100644 root:root 661a6a455893e77d703d8e1a06d5264d +File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root 9535ab8a3d235db7f14adc92d1b0434f File: /usr/share/man/man9/kins.9.xz 100644 root:root 7ef613a8265b032556c4e99f80eeee38 -File: /usr/share/man/man9/knob2float.9.xz 100644 root:root edb2b22e9388c04fd6fcf284e088b899 -File: /usr/share/man/man9/latencybins.9.xz 100644 root:root 65ba54e930342aab50bcaff53a983f32 +File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 23da8c1b9108a9c9f677fb54ecd942c7 +File: /usr/share/man/man9/latencybins.9.xz 100644 root:root 6d495089c700ccc93f7b2fabea88ae82 File: /usr/share/man/man9/lcd.9.xz 100644 root:root 620cc2889dca47fa4e7586ff480ba974 -File: /usr/share/man/man9/limit1.9.xz 100644 root:root 9a69707857015cd1359af466df0c1441 -File: /usr/share/man/man9/limit2.9.xz 100644 root:root 9ab71d5e45ff8ee2dcef2023fedb587b -File: /usr/share/man/man9/limit3.9.xz 100644 root:root d7f9ab9353accab85787734bcf5610e4 -File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root 9d58f1d9da5bdfefa29828173336faf7 -File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 2db9313cd3fc3088e6492763798a16b2 +File: /usr/share/man/man9/limit1.9.xz 100644 root:root 2df7e93160241408baf9d54c999739dc +File: /usr/share/man/man9/limit2.9.xz 100644 root:root 73d43c3e465ef32c5766e51c36f3c0d8 +File: /usr/share/man/man9/limit3.9.xz 100644 root:root c5578cdbf05b6e083ba133a44baf27c2 +File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root 7288a1661a40d7def5314cfbf7e11718 +File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 452568b5146c876d77393e4ade6a09ed File: /usr/share/man/man9/lineardeltakins.9.xz 100644 root:root ce6ac2a9983a327635ddcd90d0e26def -File: /usr/share/man/man9/logic.9.xz 100644 root:root eb57ab5c0add52c46cb21d2f9dc30ef0 -File: /usr/share/man/man9/lowpass.9.xz 100644 root:root b4f01c7cb465c1b5eb1a6d6d06239648 -File: /usr/share/man/man9/lut5.9.xz 100644 root:root 7e3e4941beedaaa1c2758cef7ee9a38d -File: /usr/share/man/man9/maj3.9.xz 100644 root:root a4836af5a145763d0941cfacadf3e6c8 -File: /usr/share/man/man9/match8.9.xz 100644 root:root 0f3198d35e97ca65815d1d4221767e3e +File: /usr/share/man/man9/logic.9.xz 100644 root:root 9e977fbf6e5b209b0aa33be5cfb7179a +File: /usr/share/man/man9/lowpass.9.xz 100644 root:root e179e968f5f0c2daee4565931022128c +File: /usr/share/man/man9/lut5.9.xz 100644 root:root df4bfd3db2fa4038aabb84bcf3ccfc04 +File: /usr/share/man/man9/maj3.9.xz 100644 root:root 1c3aac202fe50664d96b599569e50488 +File: /usr/share/man/man9/match8.9.xz 100644 root:root 880746348b43471ddadf49703548d27c File: /usr/share/man/man9/matrix_kb.9.xz 100644 root:root 339c35c251b89cbdb7a0e83bce7035d9 -File: /usr/share/man/man9/max31855.9.xz 100644 root:root 936caa9b18085d108566e37e6559afdd +File: /usr/share/man/man9/max31855.9.xz 100644 root:root 917ceb725fdc6f3e6003088d325cfa66 File: /usr/share/man/man9/maxkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root b2ea3529f042bcd88edb08cf06eabd2e -File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root e4b02ac5fb7981fb6eeda5150ed78174 -File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 2fafbdb2818000358f1e83aba207b9d5 -File: /usr/share/man/man9/message.9.xz 100644 root:root 6eab4b75111a80b23a9d25a05ddd452d -File: /usr/share/man/man9/millturn.9.xz 100644 root:root 6bf0bab008f8b622eff9b36eabfffbda -File: /usr/share/man/man9/minmax.9.xz 100644 root:root e990961fec18275ac74eb70c03f0404e +File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root e2bb453e80960c6ddbf74374d60de5dc +File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root 5ad6166c2b7d7c9e54fcaa704c422b6c +File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root f10558d592cbd1e2c1a1f0f32e5c7cca +File: /usr/share/man/man9/message.9.xz 100644 root:root 60633cf8e8c60493e033968febb56d4a +File: /usr/share/man/man9/millturn.9.xz 100644 root:root c925ede40cf37cd1d7a00bf2e751aeca +File: /usr/share/man/man9/minmax.9.xz 100644 root:root 049432e6697a60eb2128eb70f27acc9e File: /usr/share/man/man9/motion.9.xz 100644 root:root 764260411c102c5aae03e9a6e6c224cf -File: /usr/share/man/man9/moveoff.9.xz 100644 root:root 5eccdebfc503a031a03605b8c31dc255 -File: /usr/share/man/man9/mult2.9.xz 100644 root:root 3376170fb00072d7a3a6d18e705ed407 -File: /usr/share/man/man9/multiclick.9.xz 100644 root:root c6ff00976b6f902c5da784a5ff8c964e -File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 79eca845356343ec73a508afc95fc50e -File: /usr/share/man/man9/mux16.9.xz 100644 root:root 2691cb53e57d0013ca8a767eed7fe162 -File: /usr/share/man/man9/mux2.9.xz 100644 root:root 565d93682e3f2582c35ddca4ece8c620 -File: /usr/share/man/man9/mux4.9.xz 100644 root:root 789ec6ab4674d0fb6916078e9e6af096 -File: /usr/share/man/man9/mux8.9.xz 100644 root:root 551ad16f10db31899f44b147fc61e939 +File: /usr/share/man/man9/moveoff.9.xz 100644 root:root c357e09b72f1ea07bb759a7b6560cbc7 +File: /usr/share/man/man9/mult2.9.xz 100644 root:root 6f27e2fa18250afa7a53617c2d8606cf +File: /usr/share/man/man9/multiclick.9.xz 100644 root:root ab5374265b541ab42452c1549c14994e +File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root a487c820ab857fcdf71c586bf7f2abca +File: /usr/share/man/man9/mux16.9.xz 100644 root:root a68f55da6a4bcbd74a9b3f8f46b8f52d +File: /usr/share/man/man9/mux2.9.xz 100644 root:root bde793546d9f17d6fa4da9e03903d477 +File: /usr/share/man/man9/mux4.9.xz 100644 root:root 5fa2780e62f2df6aea6f15bb41315f4f +File: /usr/share/man/man9/mux8.9.xz 100644 root:root 73a83729ec491b76f11ee17480c42683 File: /usr/share/man/man9/mux_generic.9.xz 100644 root:root 81ed0423e2b5c893c152d9ed4491b0f5 -File: /usr/share/man/man9/near.9.xz 100644 root:root 655f9735aa0bb9684b5f3208299e8d59 -File: /usr/share/man/man9/not.9.xz 100644 root:root a8f0a710e347a325b92b00a49019e990 -File: /usr/share/man/man9/offset.9.xz 100644 root:root 8685350e66801a988cba9e1b33008aff -File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 5db4ec9882fe73f29c007988036f4952 -File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 014d139f0c13b37e1f89f82407a1a0e9 +File: /usr/share/man/man9/near.9.xz 100644 root:root 73d85541aca7e967e25616f336276ed3 +File: /usr/share/man/man9/not.9.xz 100644 root:root cf395331c49dbeccc8ac3d95bb731537 +File: /usr/share/man/man9/offset.9.xz 100644 root:root aaa11ef53e975ec97c7f7587d5ef7145 +File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 4fb643867e2a3f1f873070dd5839e96d +File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 265c94e4a7978ed02c5eb49424ecd8a5 File: /usr/share/man/man9/opto_ac5.9.xz 100644 root:root ed6aa04a42b4697aea2bc5fc7de8500a -File: /usr/share/man/man9/or2.9.xz 100644 root:root 14e26dca638c56d08977860469133f68 -File: /usr/share/man/man9/orient.9.xz 100644 root:root 3aa6888987bb7a3391bbb60450d8487e +File: /usr/share/man/man9/or2.9.xz 100644 root:root c9257c4bf2af9148df2451fe146183b2 +File: /usr/share/man/man9/orient.9.xz 100644 root:root 6da007efe3cd1830b2ded13c4c7be40e File: /usr/share/man/man9/pentakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 File: /usr/share/man/man9/pid.9.xz 100644 root:root 9106a5d37a8880989de46921cdb78588 -File: /usr/share/man/man9/plasmac.9.xz 100644 root:root 8a0bc789a0726656f57f159fa3b2d889 +File: /usr/share/man/man9/plasmac.9.xz 100644 root:root aa3a3d23caedb2715bc5cbe47bec08d6 File: /usr/share/man/man9/pumakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12665,52 +12665,52 @@ File: /usr/share/man/man9/rotatekins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 9ff329eaf46be1ad921bd1630f06d3ae +File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 4856d6508959f6849736d311c9a965f0 File: /usr/share/man/man9/sampler.9.xz 100644 root:root 713192b4e67ac75366e7848681137025 -File: /usr/share/man/man9/scale.9.xz 100644 root:root 702312dfe8471a295edc571a1e96d75a -File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 97c6409b766c8f67df2de359df65a6aa +File: /usr/share/man/man9/scale.9.xz 100644 root:root 965721bdfd4bf7407714c09a9f544056 +File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 9251f9fefa1089be5098a80f91587b27 File: /usr/share/man/man9/scarakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/select8.9.xz 100644 root:root 8ef57b60224ba4bab7c45227f718fc74 -File: /usr/share/man/man9/serport.9.xz 100644 root:root d2761ce12a2bf7921fbdae89f82cdc6f +File: /usr/share/man/man9/select8.9.xz 100644 root:root 8ea6b3534befe0c15170e8ef93b9fdf6 +File: /usr/share/man/man9/serport.9.xz 100644 root:root 4f3fda38fb41e9cc74c5d387d23e0644 File: /usr/share/man/man9/setsserial.9.xz 100644 root:root a0c4c6061b229bf1b0bd7b45aa0a6d1b File: /usr/share/man/man9/siggen.9.xz 100644 root:root bb8a58ed0261c53246a616a6e5859857 -File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root e85226a7d68fc1eca7bf0ed3d7c40d6e +File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 08a9811342e60c78b94a74a11605a850 File: /usr/share/man/man9/sim_encoder.9.xz 100644 root:root 1061200399dc5f45100c0b9ac0b34ddc -File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 1aa57cc46fef21711d245970c7b38e2d -File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root c3eb433dee36251baab3870e5eef6219 -File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 64eddc60b1c2f675c249db2a12b53448 -File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 1266fb83c2ef9cc1d4bed6abd800a7a1 -File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root a2898e548a64cffb47f8179c3c4795a4 -File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 3edaeca315dc2edf7da5a0aac017b794 -File: /usr/share/man/man9/spindle.9.xz 100644 root:root d0b55a0e3be8db9d14f673ac13b24b20 -File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 5636f1758fc5de729e6b6fd4d5c8ee66 +File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 895f3f73a55efa0fbc8ea925024cbb37 +File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root c0a5396a3ac039b5746e12a0fb3400d1 +File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root a51c3b35cd7766be63fa72e18963ff0d +File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 102368388986da2480cb34baeb68ad05 +File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 498d3c0c1ae4e5317e9fd0e78530a429 +File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root a6877f07091fd52b9560048e468e06c2 +File: /usr/share/man/man9/spindle.9.xz 100644 root:root 351188f65fd804e5ad670c7d1457262b +File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 08401fabe27d3f707c3ef179cd5ad314 File: /usr/share/man/man9/sserial.9.xz 100644 root:root cda27ad79b3b748fe69d3aa6133dbdf9 File: /usr/share/man/man9/stepgen.9.xz 100644 root:root 1151c7075a51ad05e9e82ff643cce6a9 -File: /usr/share/man/man9/steptest.9.xz 100644 root:root 81a6ca5c6065ea14cf52256e80af98b9 +File: /usr/share/man/man9/steptest.9.xz 100644 root:root c6f26aa2cf14b99089467cb46e19b915 File: /usr/share/man/man9/streamer.9.xz 100644 root:root d588e8b9ffd44277fa96c7d7e3413e95 -File: /usr/share/man/man9/sum2.9.xz 100644 root:root bd213dac60a42d24b148b5309e635502 +File: /usr/share/man/man9/sum2.9.xz 100644 root:root 11aaf61ad6a3d500f32cb85485a958cf File: /usr/share/man/man9/supply.9.xz 100644 root:root 760e3e6615392513db8cc348d9c1147b -File: /usr/share/man/man9/thc.9.xz 100644 root:root 772736f030d7f0acf1a5661e04efdc25 -File: /usr/share/man/man9/thcud.9.xz 100644 root:root 2cf2ff4290c32164180fccaed71fdc36 +File: /usr/share/man/man9/thc.9.xz 100644 root:root e1378a64462a8f333434434ada8271c8 +File: /usr/share/man/man9/thcud.9.xz 100644 root:root efaae5627cec152e55f374795a23ab90 File: /usr/share/man/man9/threads.9.xz 100644 root:root 0a89f5af89b5cdf6d132fcfb19ba8726 -File: /usr/share/man/man9/threadtest.9.xz 100644 root:root e522ef4e7f5ece49b225e64873f216a6 -File: /usr/share/man/man9/time.9.xz 100644 root:root 2656ae76e452d3943f26f8f4a4ced86c -File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 6b4910517932231e9032659e3b2405e6 -File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 2c22e67417c0e7bb8ce457e0ca29af84 -File: /usr/share/man/man9/tof.9.xz 100644 root:root 2984286f3905bf0a37af420d6c7d23fe -File: /usr/share/man/man9/toggle.9.xz 100644 root:root eec7b443bf6a0fa125fda7e39ce21ac8 -File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root d344d3d776e99e7c6624cf815610fab0 -File: /usr/share/man/man9/ton.9.xz 100644 root:root 956cff67eda20d2c305d50f94dcd7633 -File: /usr/share/man/man9/tp.9.xz 100644 root:root 8fe3ef3a7e133433722b26082a8e9e83 -File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root bbf03aab3f1f69d2abcdc6d331a398d2 +File: /usr/share/man/man9/threadtest.9.xz 100644 root:root e6dc09e9eb5c339c340a24140bfdb3c2 +File: /usr/share/man/man9/time.9.xz 100644 root:root b1216c3e67ca892558c94cec47c54f84 +File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 260e2a7dc496ea4af343bf4b2b56099a +File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 9df3720ff6fad236d9e3f6548b6665f1 +File: /usr/share/man/man9/tof.9.xz 100644 root:root d8c5876f81f489e0179e76c0de11819c +File: /usr/share/man/man9/toggle.9.xz 100644 root:root 4ba22a492f733472d305d8837c2e7f1f +File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 497d1f07d7179f04bf36e99f561e941f +File: /usr/share/man/man9/ton.9.xz 100644 root:root 7637f5d398026a2f8a2a4b3f9ab0abea +File: /usr/share/man/man9/tp.9.xz 100644 root:root e1c6df4394c2bf80b2e0d3f27779ad8b +File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 4878e2b56f1a05fb2170b4b17fec9143 File: /usr/share/man/man9/tripodkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 6aec8fdcb4e4405925b5dcb1e0e2ef39 -File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root 025d57d62d27ac51a38e138a2a9dffe6 +File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 74e375e4b85113a7a931edff113df16e +File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root a945c0611424ef92349cace62a7812fe File: /usr/share/man/man9/trivkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/updown.9.xz 100644 root:root 5328c1c89f957f13f3caff39d7f598ab -File: /usr/share/man/man9/userkins.9.xz 100644 root:root c807b5af3a824bc984ab001365db1898 +File: /usr/share/man/man9/updown.9.xz 100644 root:root f6b888314b00b411e1c00dc701824cef +File: /usr/share/man/man9/userkins.9.xz 100644 root:root 5946cdf0b7f09b14a13985d1251b239d File: /usr/share/man/man9/watchdog.9.xz 100644 root:root 3ccf8bb1e89f95bd9212dab04d95b193 -File: /usr/share/man/man9/wcomp.9.xz 100644 root:root ba7810c084a1aa0514aa7b9494a5419d +File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 815546ae4985364125c12b12caeb0e41 File: /usr/share/man/man9/weighted_sum.9.xz 100644 root:root eb6db3b792484b220170ad1fd6fce770 -File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 582327a96322d1dd0b84c2eac5e2c5a7 -File: /usr/share/man/man9/xor2.9.xz 100644 root:root 6e4770cc44d2de8527b2e407ef432b92 -File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root dd1177206501125c6419deb1566e6e6c +File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root a0784973b8e70f870f211f8e9ba6d795 +File: /usr/share/man/man9/xor2.9.xz 100644 root:root bb1720ff0d874d94523ced0693e55387 +File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root cbab556963ad8c22735189d1488e1843 File: /usr/share/qtvcp 40755 root:root @@ -13140,5 +13140,5 @@ File: /usr/share/qtvcp/panels/qtplasmac_sim/__pycache__ 40755 root:root -File: /usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-1.pyc 100644 root:root f8a88618e6f3966261998792358e01c7 -File: /usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-2.pyc 100644 root:root 2e33087523494c4ff2223f6e4ebf2f1a -File: /usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.pyc 100644 root:root f8a88618e6f3966261998792358e01c7 +File: /usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-1.pyc 100644 root:root 370ded8248fc6a3551747d3eaa8a0ee1 +File: /usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-2.pyc 100644 root:root a5c1830b837a04049ae9992ca20ca651 +File: /usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.pyc 100644 root:root 370ded8248fc6a3551747d3eaa8a0ee1 File: /usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim.qss 100644 root:root b328deea550737aa27a6da1f841c6e4d @@ -13350,5 +13350,5 @@ File: /usr/share/qtvcp/screens/qtdragon/__pycache__ 40755 root:root -File: /usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc 100644 root:root 7e8d7d880284bb1570dbd49884d4b3b1 -File: /usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-2.pyc 100644 root:root 7e8d7d880284bb1570dbd49884d4b3b1 -File: /usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.pyc 100644 root:root 7e8d7d880284bb1570dbd49884d4b3b1 +File: /usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc 100644 root:root 164bc4b6555c5423d65e4eb28168cd69 +File: /usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-2.pyc 100644 root:root 164bc4b6555c5423d65e4eb28168cd69 +File: /usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.pyc 100644 root:root 164bc4b6555c5423d65e4eb28168cd69 File: /usr/share/qtvcp/screens/qtdragon/argentium.qss 100644 root:root 441f17a735b8c6b685099804004f38d0 @@ -13398,5 +13398,5 @@ File: /usr/share/qtvcp/screens/qtdragon_hd/__pycache__ 40755 root:root -File: /usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc 100644 root:root 70704b782e088be0b7afad28588c7f87 -File: /usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-2.pyc 100644 root:root 70704b782e088be0b7afad28588c7f87 -File: /usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.pyc 100644 root:root 70704b782e088be0b7afad28588c7f87 +File: /usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc 100644 root:root 527ac26a4054d04b6e7ddfd9268ef84b +File: /usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-2.pyc 100644 root:root 527ac26a4054d04b6e7ddfd9268ef84b +File: /usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.pyc 100644 root:root 527ac26a4054d04b6e7ddfd9268ef84b File: /usr/share/qtvcp/screens/qtdragon_hd/argentium.qss 100644 root:root 2e9051ec3bd8c96f77c42ed78a123ea9 @@ -13465,5 +13465,5 @@ File: /usr/share/qtvcp/screens/qtlathe/__pycache__ 40755 root:root -File: /usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc 100644 root:root bf90633310c0ae078425432300264963 -File: /usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-2.pyc 100644 root:root bf90633310c0ae078425432300264963 -File: /usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.pyc 100644 root:root bf90633310c0ae078425432300264963 +File: /usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc 100644 root:root 49faa1b2c90f17486570d14858c23321 +File: /usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-2.pyc 100644 root:root 49faa1b2c90f17486570d14858c23321 +File: /usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.pyc 100644 root:root 49faa1b2c90f17486570d14858c23321 File: /usr/share/qtvcp/screens/qtlathe/images 40755 root:root @@ -13490,5 +13490,5 @@ File: /usr/share/qtvcp/screens/qtplasmac/__pycache__ 40755 root:root -File: /usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc 100644 root:root f7198377f874c34f3f78ffcf0e49f011 -File: /usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-2.pyc 100644 root:root f7198377f874c34f3f78ffcf0e49f011 -File: /usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.pyc 100644 root:root f7198377f874c34f3f78ffcf0e49f011 +File: /usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc 100644 root:root fc61ed072fb83b3c72e73bc4b56d3d3e +File: /usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-2.pyc 100644 root:root fc61ed072fb83b3c72e73bc4b56d3d3e +File: /usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.pyc 100644 root:root fc61ed072fb83b3c72e73bc4b56d3d3e File: /usr/share/qtvcp/screens/qtplasmac/language_howto 100644 root:root 582c0d134659973027a23a25248e8bd5 @@ -13507,5 +13507,5 @@ File: /usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__ 40755 root:root -File: /usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc 100644 root:root eb89dbc244b8724d06e9d2d062d1f0ce -File: /usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-2.pyc 100644 root:root eb89dbc244b8724d06e9d2d062d1f0ce -File: /usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.pyc 100644 root:root eb89dbc244b8724d06e9d2d062d1f0ce +File: /usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc 100644 root:root ed5d804aa0872308f583282eb92c3db2 +File: /usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-2.pyc 100644 root:root ed5d804aa0872308f583282eb92c3db2 +File: /usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.pyc 100644 root:root ed5d804aa0872308f583282eb92c3db2 File: /usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac.style 120777 root:root ../qtplasmac/qtplasmac.style @@ -13515,5 +13515,5 @@ File: /usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__ 40755 root:root -File: /usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc 100644 root:root 8c5f9ad018c9d823b1e36c8873a22e08 -File: /usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-2.pyc 100644 root:root 8c5f9ad018c9d823b1e36c8873a22e08 -File: /usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.pyc 100644 root:root 8c5f9ad018c9d823b1e36c8873a22e08 +File: /usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc 100644 root:root 4988400b91793a6eb9abf3334df2d28d +File: /usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-2.pyc 100644 root:root 4988400b91793a6eb9abf3334df2d28d +File: /usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.pyc 100644 root:root 4988400b91793a6eb9abf3334df2d28d File: /usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac.style 120777 root:root ../qtplasmac/qtplasmac.style @@ -13538,5 +13538,5 @@ File: /usr/share/qtvcp/screens/woodpecker/__pycache__ 40755 root:root -File: /usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc 100644 root:root 5bd2ed88ec21751f49be3ec547adc882 -File: /usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-2.pyc 100644 root:root 5bd2ed88ec21751f49be3ec547adc882 -File: /usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.pyc 100644 root:root 5bd2ed88ec21751f49be3ec547adc882 +File: /usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc 100644 root:root 72bb0351b2f298ea9aaafb7d0e1bc7bc +File: /usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-2.pyc 100644 root:root 72bb0351b2f298ea9aaafb7d0e1bc7bc +File: /usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.pyc 100644 root:root 72bb0351b2f298ea9aaafb7d0e1bc7bc File: /usr/share/qtvcp/screens/woodpecker/argentium-1.qss 100644 root:root 5462b5304b67c9b44b168ce86baa7516 @@ -13668,2 +13668,2 @@ File: /usr/share/qtvcp/widgets_ui/virtual_keyboard.ui 100644 root:root e757c13d9a96b2fb641409c70442ded6 -RPMIdentity: 7e167c6ad365199f683e72ddc342ff8ac8035c611d9d1b2d57b10cbbfe221023fac80307ec586b1df61c46d05b8b2e39f83c57c02244dd88f2785c048540b760 +RPMIdentity: 3a0b7650eb8c4fe61330d834bf2b8c9d91d4517336a657cd09495e78608ae34019a22d9ce0bd2096be47898668ddcd94e38696c5bd811c432616505efb2b1695 --- linuxcnc-debuginfo-2.9.3-alt3.20240830.x86_64.rpm.repo 2024-08-31 08:05:09.000000000 +0000 +++ linuxcnc-debuginfo-2.9.3-alt3.20240830.x86_64.rpm.hasher 2024-09-12 04:03:55.893112496 +0000 @@ -2832,3 +2832,3 @@ File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/pi500_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 297052fe718214f951ead01dc2875c42 +File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 9796e0dc0513139ef2f14b3d9fe3bfe0 File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/pi500_vfd/pi500_vfd.comp 100644 root:root 36db960cdfb47870d04dc0825e67fbe5 @@ -2843,3 +2843,3 @@ File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/wj200_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 863b6f94fda3418056de5344893d960e +File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 5b23a0d6a3a9f5205ecc5d5d29ea8e95 File: /usr/src/debug/linuxcnc-2.9.3/src/hal/user_comps/wj200_vfd/wj200_vfd.comp 100644 root:root 59df738983b6701d52519fdd79609b2f @@ -2890,127 +2890,127 @@ File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/abs.c 100644 root:root c796a7d9257a297bdb510144e4fcff4f -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/abs_s32.c 100644 root:root 8eb7b8f1d13f217b1253fea21e38a75a -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/and2.c 100644 root:root 1f3133129508c7a4ae03fb27fd5325ea -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/anglejog.c 100644 root:root 80ce6686ea766b3637fb8ff10392e09c -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/axistest.c 100644 root:root e98936a58e0b1d6492db336cddb39357 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bin2gray.c 100644 root:root 81b057d4f81a4e9099356b289427d85f -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/biquad.c 100644 root:root 97a5e7db1215dee1681486b8f740d187 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bitslice.c 100644 root:root ea4bcc0726d4a065fb4df9a89e773476 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bitwise.c 100644 root:root 8ed6cc93392069a47884555caffabe76 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bldc.c 100644 root:root daa7235cb3573058607e59ac393ae23e -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/blend.c 100644 root:root 3e3fbef7cba4f92ce4be5fc6a9a2e295 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/carousel.c 100644 root:root d2d37b3e64adf9f04d3738b4daeb569b -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/charge_pump.c 100644 root:root d5248ab12f2cf5941bfc7e97c6540fe7 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/clarke2.c 100644 root:root 15faacd5e8e09a02a17ee4000b994bab -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/clarke3.c 100644 root:root 205570b9b1bcb80bbe149dc9fa8af453 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/clarkeinv.c 100644 root:root 5ff11eb0d7dd0a6959f31d6a191bd2cd -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/comp.c 100644 root:root 5ee5b1cf005f1d0162e73a26b39a4917 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/constant.c 100644 root:root 192cd940c2f93a791430852c6af26d3f -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_bit_float.c 100644 root:root 78dbcda903edf5036a2567f2226fd7c1 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_bit_s32.c 100644 root:root 2c1d6d2dfc46111aaf70091e6fdca6a2 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_bit_u32.c 100644 root:root dd896de0663351bb4303b016aceef995 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_float_s32.c 100644 root:root b7126fbf5eda699002783261df46d8f9 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_float_u32.c 100644 root:root 6f98429693800d87c24dca2d891b463d -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_s32_bit.c 100644 root:root 3f12c54de2090bfd0b8e4a048a15a3d8 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_s32_float.c 100644 root:root 8afa4edc908edf7f39b8223dc68e6935 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_s32_u32.c 100644 root:root 9ab840d153f350837fa593c44b1ac21b -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_u32_bit.c 100644 root:root d345d149aa277a3d55baf55c29fbb6ad -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_u32_float.c 100644 root:root aeae37d85f79fd5629c846940550c7a1 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_u32_s32.c 100644 root:root 57d010620cabfceb1d920d6c251e2e84 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/corexy_by_hal.c 100644 root:root 0276ea4974253504491450d48ba93218 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/dbounce.c 100644 root:root 356cd4ef0a8e471e00b8c343727db325 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ddt.c 100644 root:root 2623e59b55ffe0fac3242199c396a15b -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/deadzone.c 100644 root:root f57010cd76735a791f387cfe6472595c -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/demux.c 100644 root:root 71a7909eb36ede97c50eddd40bdb75d9 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/differential.c 100644 root:root 87c73daf1831c089ed870de46c7d5284 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/div2.c 100644 root:root 9a0014e67a7e3d74d724d97d9aab3a41 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/edge.c 100644 root:root 1b880f3d5b122124aac75c7e0878b095 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/eoffset_per_angle.c 100644 root:root 52bb66ad4463380242679222247466a1 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/estop_latch.c 100644 root:root 0f523f73f72b84f46603b94ca6247bf8 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/feedcomp.c 100644 root:root 392b5863382eb17052d489bfd0d839d7 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/filter_kalman.c 100644 root:root b28c304c05d2973430529f4406600d6a -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/flipflop.c 100644 root:root 12172ae40321d230aacb0f2a1d2983d0 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/gantry.c 100644 root:root 2510033e5f631077b1a1879379f28f7f -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/gearchange.c 100644 root:root d17ba3a870e55d058a081ec52d8adc1b -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/gray2bin.c 100644 root:root 9cd0f34d57c43333e1c9bcb27ba18881 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/histobins.c 100644 root:root da251766d0f14d2d6cc766b6462b249e -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/homecomp.c 100644 root:root de7d81c420a57385c45fc904a2a182ba -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/hypot.c 100644 root:root 19899a6c102a73842cddad55cd7f3b28 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ilowpass.c 100644 root:root 3cdfd99efc547802dcdde7eb1c54784d -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/integ.c 100644 root:root bf2cd1f416abd6796227122575dd88c6 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/invert.c 100644 root:root b206aee9581f4355bdcb8c892d052dba -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/joyhandle.c 100644 root:root 52c74b807ad4a27fd92a9b4339849b72 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/knob2float.c 100644 root:root 754ce43762a1b3252206264f49dd37eb -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/latencybins.c 100644 root:root 5d96b853599a4f93364aee8730159d5d -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit1.c 100644 root:root eb72b134f214cfc2eb2d0b376d659d0f -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit2.c 100644 root:root fad7dc72ef9e0d9073689af44b13b096 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit3.c 100644 root:root 4bc24e58e21bd987437510c301e6e64b -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit_axis.c 100644 root:root 34cb425b3b4438724d6bcba085ba607d -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/lincurve.c 100644 root:root df657f455d6bda9d17c54d361f2e7912 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/logic.c 100644 root:root e0c9a2167c62ecfbfa10854ab0cb9a05 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/lowpass.c 100644 root:root 31b327975bf7eb992d14f53073eed746 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/lut5.c 100644 root:root 24b866f8a5d77ff865a99a0199b53a44 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/maj3.c 100644 root:root 5f283204f004a124d437abbcfd1c1ba8 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/match8.c 100644 root:root b3279755b8e23f6129279cb8b89c3cd2 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/max31855.c 100644 root:root d50a62601c0083266700a77535512bec -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 82e7f01c4f296f4e1bb95afd1e53091f -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/message.c 100644 root:root 8bf4ef92840348847eee0bee329191f1 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/millturn.c 100644 root:root bdde580ba07ace02cb6dd2f52cc59374 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/minmax.c 100644 root:root 348d520f5b39830ad46d5201e1edb577 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/moveoff.c 100644 root:root 1b33a0c27214a4381dd08b8c84622fdc -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mult2.c 100644 root:root 84f9f371ff52dfa7afa1b7e4db888cd4 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/multiclick.c 100644 root:root 387d6d42589144ab83aff8bb54a2ca54 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/multiswitch.c 100644 root:root d97b3e0ca4ebf11f272c7348dbc1260f -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux16.c 100644 root:root 176365f8d48fea80322e83770bd602fd -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux2.c 100644 root:root c5dddb89db981ab977ade1a2b7a5bfc3 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux4.c 100644 root:root 9f6d1b4e789150cdb4287826f01bebde -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux8.c 100644 root:root a7eebf88b4862583b86f0350394ab0d0 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/near.c 100644 root:root d85fa8bd764fed526b1cfe5383ebd6d5 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/not.c 100644 root:root d0964df63800b4fbdc53a3a075c4b42b -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/offset.c 100644 root:root 12b2a396ff81f430e73379a49dcabe09 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ohmic.c 100644 root:root 0464011244231cccf73c5cc06a22b2c5 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/oneshot.c 100644 root:root 004f44eed7590483d100a761a47d47cd -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/or2.c 100644 root:root c1a5343bfa63f73e56f88670eba21006 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/orient.c 100644 root:root 602157af63328dd5e7f12a4b6e24d548 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/plasmac.c 100644 root:root 62d3f4d6d34ca0ed1b0eedb5a1f30828 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sample_hold.c 100644 root:root 9b834587b96beb909670d26461a367a9 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/scale.c 100644 root:root 5f8fd2ee674905ac1a94d33877910f91 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 6315890ea84132512cd025eb539c29b3 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/select8.c 100644 root:root db167cb7f12b75b0420af995bd7deb63 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_axis_hardware.c 100644 root:root 509d2d39858597be9c79dc282ea9fe02 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_home_switch.c 100644 root:root 18eb506505aa11b059186b9f629f9627 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_matrix_kb.c 100644 root:root c9e7513aefedd1314d7dd6eb9a01c906 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_parport.c 100644 root:root 70c47ea6f87a95c50569835e0946eb37 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_spindle.c 100644 root:root 220207e6729c289d1a398aa11825da02 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/simple_tp.c 100644 root:root 9c2e25f057550ad90070814e9950db79 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sphereprobe.c 100644 root:root ba5dbc5602bd6c25f1fde127eaeddf59 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/spindle.c 100644 root:root 0e20bcb62c4964ea6b4b8f2ad0acbaa0 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/spindle_monitor.c 100644 root:root d6e845a237978d0b0749e263ff38fe23 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/steptest.c 100644 root:root 0630be5d33084aadb1440ca8b2b13a21 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sum2.c 100644 root:root 760b2a4b810f31571c4f411306ed72c1 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/thc.c 100644 root:root 6a27c8408a980de60e55d6cc5a80dd53 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/thcud.c 100644 root:root c5cb96616a1a5b5a1735c0eec12b4e39 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/threadtest.c 100644 root:root ca13894fa2b9e9bbfbd491c546a033e0 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/time.c 100644 root:root 46d642884971cfc9872991f192feb226 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/timedelay.c 100644 root:root 370a6f710d270df4a579ba2bc1a757b2 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/timedelta.c 100644 root:root 94029c08c6fa22536299daec1394d4a3 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tof.c 100644 root:root 264c7e3f93ee044fd1e981f783657720 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/toggle.c 100644 root:root 1d9c0ce47a72eea26e7601aff68004d5 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/toggle2nist.c 100644 root:root f2142d112accc72677ffcd006374c165 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ton.c 100644 root:root 11f5a2de1ec2666aa050fc006c782542 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tp.c 100644 root:root 3e2c0b57a9e67bf7bfe4b70e53a4cd07 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tristate_bit.c 100644 root:root 5759d7462ed2e44738e242464806a875 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tristate_float.c 100644 root:root f12fb00da81423ef284c6f8c937c6f2d -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/updown.c 100644 root:root cc4c118b9a614349b75933ef20308576 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/userkins.c 100644 root:root 2eab876e40834b767efb630bb63dad11 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/wcomp.c 100644 root:root 5a95a833e52640cc7ca97b675523dbc4 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/xhc_hb04_util.c 100644 root:root 8277689d4ddece4a5162829be400baf6 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/xor2.c 100644 root:root efb8867919988e98c5be0e61823668d6 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 725252643b17a66532721b7674f12c7a +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/abs.c 100644 root:root b91a677cd1f6e2642e0c5e8b5d6a39d1 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/abs_s32.c 100644 root:root 51ac4370941f024821095a5a7e39aa2a +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/and2.c 100644 root:root 4c442c84f395405e5c6f9d0a8dfeca2e +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/anglejog.c 100644 root:root 47c1f64204abb37b926f37f8a4fba5ac +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/axistest.c 100644 root:root 1673de7ad07320468160bad3f66da5ba +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bin2gray.c 100644 root:root 46643c30cf4791367b0b640fd901a62c +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/biquad.c 100644 root:root b9e2819a1029d077653d684be3197083 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bitslice.c 100644 root:root 7534d6174f0280a842860639add8670c +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bitwise.c 100644 root:root 83f2ff985c190adab72f5be57312e487 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/bldc.c 100644 root:root 39709001e923fb532251811cafe282e7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/blend.c 100644 root:root 8a350211f7e05bec229c37bb4aa21b92 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/carousel.c 100644 root:root e75daf4618eeb02b15931e886c1b40e5 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/charge_pump.c 100644 root:root 788a1259dda75cfa4a0c5bff4fb366bc +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/clarke2.c 100644 root:root 028e36b933d1572a8b2c7fcf37728ddd +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/clarke3.c 100644 root:root bded5aede0617f9698333db0926498c2 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/clarkeinv.c 100644 root:root 945ae1918ce5405735dbd305b4339212 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/comp.c 100644 root:root dabfb0c1f28a8d7b4f63487a3c4ec284 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/constant.c 100644 root:root 41d4e11b04b4666f787886f1f539afe7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_bit_float.c 100644 root:root 66689ecb424574fb5a77c9afa9aff507 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_bit_s32.c 100644 root:root e4e76035f9a61a545d08f898cdff9ea6 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_bit_u32.c 100644 root:root ec5db693b298d353d9099ff3821b95c2 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_float_s32.c 100644 root:root e52b81b5358d0558bb796f3e5450c6dd +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_float_u32.c 100644 root:root dce35980db3fdfa2edd24d8b5c97f419 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_s32_bit.c 100644 root:root 5b61e3c50f8f6911ecf5450031ea53b7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_s32_float.c 100644 root:root a99fd92e118fe8c52f9354f850b3b8a3 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_s32_u32.c 100644 root:root ecae0dceb894c736da7897019ed3a5c3 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_u32_bit.c 100644 root:root 5e15d2ae593206b189a2490ede1ecdd6 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_u32_float.c 100644 root:root 65ed5943d7079b8e082db30292d469e0 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/conv_u32_s32.c 100644 root:root 8238672931c2d0ab54128757c6ff2423 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/corexy_by_hal.c 100644 root:root e031c4fd0035cf83f50e9fccd76510d8 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/dbounce.c 100644 root:root b5b435549dbe97684be943782f555e74 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ddt.c 100644 root:root ad46aa4b948bec49cec822a934eeed44 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/deadzone.c 100644 root:root 0695d04018c522566ecc351c84652816 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/demux.c 100644 root:root e1d77ca3f584a2e9a7b1ad6737fd795a +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/differential.c 100644 root:root 95621b85da3464f515aa30df1ed0c4c8 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/div2.c 100644 root:root cd28a1891992611a177c18c42aa6412b +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/edge.c 100644 root:root 52c6552f28ccc86a9993ecfa8c5c2d10 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/eoffset_per_angle.c 100644 root:root 57db10d748dcb7455fca9d53d8c73e6a +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/estop_latch.c 100644 root:root 943472dc5ec453600d56ac2dfbd4bb9f +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/feedcomp.c 100644 root:root b7ae8e5407c04275b83bbb899e4cb70f +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/filter_kalman.c 100644 root:root 2358ecad0e7fa903a0eb4ad0d51fbc09 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/flipflop.c 100644 root:root e080bdede2c5b24aa6715e825eb6d2ba +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/gantry.c 100644 root:root 137950814ae0b33be1ec18e02288e322 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/gearchange.c 100644 root:root fd69de412193960e855eb7e179f0bcb0 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/gray2bin.c 100644 root:root 88174a8cbee980d3729cf4f43dc9ab41 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/histobins.c 100644 root:root c0ef8e3691c3009556002995fcdec879 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/homecomp.c 100644 root:root 8fecb40582bfa2cc89bd5e96f6dfa30a +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/hypot.c 100644 root:root 722b503a5ebd5eb016ebacd5b25cc243 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ilowpass.c 100644 root:root d8a50dbce051da992317a08d89f5b4a3 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/integ.c 100644 root:root 3b15e5e21bb6634f2757f743f3f7ceed +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/invert.c 100644 root:root 71ae408e93c5d75ceb0e1fe7313c9e75 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/joyhandle.c 100644 root:root 5d1c6300cc62e5b290aae4ae04a7659f +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/knob2float.c 100644 root:root 91d370a9a68aba84e650d1ad6f68df2f +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/latencybins.c 100644 root:root ce8ffc0bcc878b06e55de9ce78dee62e +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit1.c 100644 root:root 7264d08c539eccb5f8cf6b5e16af2a66 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit2.c 100644 root:root 86b9cd1fc3169e78dcb9e35b1363d97c +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit3.c 100644 root:root 164b1ca5bf623be7b3fa7737eb6340e7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/limit_axis.c 100644 root:root f43b0fdb7c5840e919089642bc196526 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/lincurve.c 100644 root:root 48740b76681325cb46d4699f5ba53df3 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/logic.c 100644 root:root 4566517d66433a737a1cc3cea24589a8 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/lowpass.c 100644 root:root 259b31a032981cff2a34d0e3cbff1508 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/lut5.c 100644 root:root f3ac999254ee6c1b96228933be4300e7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/maj3.c 100644 root:root 511d4bcf8478cc0a4229506e767b7df1 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/match8.c 100644 root:root d0a0ec9cf37d49e453c598bde4e1f266 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/max31855.c 100644 root:root 88b1a23cdfd3af7dc02a71c08e6d60bb +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root c8126437370b068ccd82711f778ccb60 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/message.c 100644 root:root 4ea6eb8331c6a135a1e9474eec63df16 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/millturn.c 100644 root:root 518ecb4d822b1346c879ab5799172a47 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/minmax.c 100644 root:root 80819eae12a88afac9ee4b16226c1b74 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/moveoff.c 100644 root:root 89aaecb0d4b7bbb281d758286cfb72db +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mult2.c 100644 root:root 1edb224748ab61a5274088c277daada2 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/multiclick.c 100644 root:root abf9c03dac056516d0b804990e24db4b +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/multiswitch.c 100644 root:root 66de0cbda1b518d6f9e10cfa6225f2b7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux16.c 100644 root:root c28154658109df74237aabc52b0c4b89 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux2.c 100644 root:root 5450fb375e728aa92868b67f88da2a97 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux4.c 100644 root:root 847a81e9a824502159dcbf3da6fb8b42 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/mux8.c 100644 root:root 562fecf573aab59375d58c964389f2ac +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/near.c 100644 root:root a6f248322c9e1d2fd6c8c778a1ccf7f3 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/not.c 100644 root:root 15d85063cb5e167cf210e7c02604efc5 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/offset.c 100644 root:root 7c889d819eb1f320717549ee3db88da8 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ohmic.c 100644 root:root bf296a2fc6bee397e273de7e89315b35 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/oneshot.c 100644 root:root 868caea72cf0ad54d463b20805bca8bd +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/or2.c 100644 root:root 1d35dc77559573e20d9fb018852faea7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/orient.c 100644 root:root 56b05896b3d4abd98a9d178af8c3c070 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/plasmac.c 100644 root:root 2bb390e79278154a812eb40402f3ca13 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sample_hold.c 100644 root:root 6d97bd25afb54d46fc2da5f16d4a9074 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/scale.c 100644 root:root 00be6d0629449aa76410157208bcf54e +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 21eeb953d4900ea9e8ba80107506236a +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/select8.c 100644 root:root 5eb92568fc577c29354547d231b4ccde +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_axis_hardware.c 100644 root:root ced5eb21f067d6e0b06a3cea19cb882b +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_home_switch.c 100644 root:root 44b7f36303e94212c4e224e1d0dd4904 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 3c16703728d6731bfbe9d01c2255bdb9 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_parport.c 100644 root:root 757a00d62c117284b11d303484401c79 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sim_spindle.c 100644 root:root deb0cb25ad3bd051b85c28400bbdedb4 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/simple_tp.c 100644 root:root 515bcf6367d38ef76fcb6202e3e8cc09 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sphereprobe.c 100644 root:root 1036dbf6e58d58c8b02a55526c97e4bc +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/spindle.c 100644 root:root f0d5ef724ded56a4a09fb2edaa3c35f4 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/spindle_monitor.c 100644 root:root e0ae47cf42ef9fd13711b26a9e31f919 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/steptest.c 100644 root:root 495f0b7720c9c79c04953082522ac7c8 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/sum2.c 100644 root:root fe20cb1495c069d7b341702a3b99c4aa +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/thc.c 100644 root:root 0a90da04ea7e68a15f0979b95977b2f7 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/thcud.c 100644 root:root df501882a2b7ba8ef8efa3bf91eda9be +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/threadtest.c 100644 root:root e0e220187540889432ccacbe93d2511b +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/time.c 100644 root:root 5bf9b04b90eca6eb239cff7fa718e457 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/timedelay.c 100644 root:root 4bee2255a24ab32006993a9551db238c +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/timedelta.c 100644 root:root 23782d7d7d09a9920ba9d01d67a5cecf +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tof.c 100644 root:root 4a4a22ecd8807740c34b908c3795d5c3 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/toggle.c 100644 root:root 096b4a15f9db51dc0d027901250cdbc8 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/toggle2nist.c 100644 root:root 8a91e1f342a30969792b019e80f49b7e +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/ton.c 100644 root:root fb5ee5f5a3da24c929653b8fdcb57931 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tp.c 100644 root:root af8e1b8c2c5d1eec2911c1ee0279a909 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tristate_bit.c 100644 root:root bfa323ab06dd594a58d4146283a6a79b +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/tristate_float.c 100644 root:root b7f8d132f903efbd66d820967bf72873 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/updown.c 100644 root:root 4a332033a2d846dcbd2e2958a5648e72 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/userkins.c 100644 root:root f28c9d24a46e1e060c8ba7cff76187b1 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/wcomp.c 100644 root:root 14a9c6c16991577b61407eea004d7060 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/xhc_hb04_util.c 100644 root:root ed8080fbb01e3d26a1d422c4c9057179 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/xor2.c 100644 root:root db2975304dfff5e9a8280870c87b1131 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 2ee482eb3a97bc28fe8cdd8aa14bc78d File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/drivers 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 37621f9d5a49fac968c2e5ec47a2fc33 -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/drivers/mesa_uart.c 100644 root:root 45219131a874e14ef7b8c5ad372747ff -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/drivers/serport.c 100644 root:root 21f8921ca3505a699b31d3ef6e03a101 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 2838afb22d58a877db82544ab4ca3c35 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/drivers/mesa_uart.c 100644 root:root 5d82c6ca71c54a0288b57bc67247dabc +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/drivers/serport.c 100644 root:root 46de0933491fd37b6822e7c29fb04c6f File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/user_comps 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/user_comps/thermistor.c 100644 root:root d112c3c8327bcef05ce6838b39ecbc71 +File: /usr/src/debug/linuxcnc-2.9.3/src/objects/hal/user_comps/thermistor.c 100644 root:root c39373e8c6cd4e6934f8b32fd6b1d001 File: /usr/src/debug/linuxcnc-2.9.3/src/rtapi 40755 root:root @@ -3025,2 +3025,2 @@ File: /usr/src/debug/linuxcnc-2.9.3/src/rtapi/uspace_rtapi_string.c 100644 root:root e93709d53c7b25f0358ac01589652a43 -RPMIdentity: 46d2cf141aba6dceda4e1f6f1b19992dbfe69a9d9c3a3464edc16b5088cdd4a204de881d5d033b092c4a5275ecb288304f87661fcc7a8f3c9353487576922606 +RPMIdentity: 7da8b876d30315b14389deb92b572cb4ae0307af3ab3450d4114a6fb771b94ef10aa86c3bd80df253249f884c94e3a2ccde12e25a6d80bcc275be07e31a4e617