<86>Jul 28 01:39:58 userdel[3226959]: delete user 'rooter' <86>Jul 28 01:39:58 userdel[3226959]: removed group 'rooter' owned by 'rooter' <86>Jul 28 01:39:58 userdel[3226959]: removed shadow group 'rooter' owned by 'rooter' <86>Jul 28 01:39:58 groupadd[3227002]: group added to /etc/group: name=rooter, GID=1304 <86>Jul 28 01:39:58 groupadd[3227002]: group added to /etc/gshadow: name=rooter <86>Jul 28 01:39:58 groupadd[3227002]: new group: name=rooter, GID=1304 <86>Jul 28 01:39:58 useradd[3227021]: new user: name=rooter, UID=1304, GID=1304, home=/root, shell=/bin/bash, from=none <86>Jul 28 01:39:58 userdel[3227040]: delete user 'builder' <86>Jul 28 01:39:58 userdel[3227040]: removed group 'builder' owned by 'builder' <86>Jul 28 01:39:58 groupadd[3227060]: group added to /etc/group: name=builder, GID=1305 <86>Jul 28 01:39:58 groupadd[3227060]: group added to /etc/gshadow: name=builder <86>Jul 28 01:39:58 groupadd[3227060]: new group: name=builder, GID=1305 <86>Jul 28 01:39:58 useradd[3227072]: new user: name=builder, UID=1305, GID=1305, home=/usr/src, shell=/bin/bash, from=none <13>Jul 28 01:40:04 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432004 installed <13>Jul 28 01:40:04 rpmi: libgtest-1.13.0-alt2 sisyphus+318771.100.1.1 1681838178 installed <13>Jul 28 01:40:04 rpmi: libgmock-1.13.0-alt2 sisyphus+318771.100.1.1 1681838178 installed <13>Jul 28 01:40:04 rpmi: libgtest-devel-1.13.0-alt2 sisyphus+318771.100.1.1 1681838178 installed <13>Jul 28 01:40:04 rpmi: libgmock-devel-1.13.0-alt2 sisyphus+318771.100.1.1 1681838178 installed <13>Jul 28 01:40:04 rpmi: libgdbm-1.8.3-alt10 sisyphus+278100.1600.1.1 1626058413 installed <13>Jul 28 01:40:04 rpmi: libexpat-2.5.0-alt1 sisyphus+309227.100.1.1 1667075764 installed <13>Jul 28 01:40:04 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962877 installed <13>Jul 28 01:40:04 rpmi: gcc-c++-common-1.4.27-alt1 sisyphus+278099.1300.1.1 1626028636 installed <13>Jul 28 01:40:04 rpmi: libstdc++13-devel-13.1.1-alt2 sisyphus+325290.100.1.1 1689953674 installed <13>Jul 28 01:40:05 rpmi: gcc13-c++-13.1.1-alt2 sisyphus+325290.100.1.1 1689953674 installed <13>Jul 28 01:40:05 rpmi: libp11-kit-1:0.24.1-alt2 sisyphus+324666.100.1.1 1689083439 installed <13>Jul 28 01:40:05 rpmi: libtasn1-4.19.0-alt2 sisyphus+323514.100.1.1 1687445894 installed <13>Jul 28 01:40:05 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Jul 28 01:40:05 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Jul 28 01:40:05 rpmi: ca-certificates-2022.12.14-alt1 sisyphus+311754.200.1.1 1671046143 installed <13>Jul 28 01:40:05 rpmi: ca-trust-0.1.4-alt1 sisyphus+308690.100.1.1 1666182992 installed <13>Jul 28 01:40:05 rpmi: p11-kit-trust-1:0.24.1-alt2 sisyphus+324666.100.1.1 1689083439 installed <13>Jul 28 01:40:06 rpmi: libcrypto3-3.1.1-alt3 sisyphus+325072.200.2.1 1689602870 installed <13>Jul 28 01:40:06 rpmi: libssl3-3.1.1-alt3 sisyphus+325072.200.2.1 1689602870 installed <13>Jul 28 01:40:06 rpmi: python3-3.11.4-alt2 sisyphus+324359.500.4.1 1689257961 installed <13>Jul 28 01:40:07 rpmi: python3-base-3.11.4-alt2 sisyphus+324359.500.4.1 1689257961 installed <13>Jul 28 01:40:07 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687267966 installed <13>Jul 28 01:40:07 rpmi: less-633-alt1 sisyphus+324814.100.1.1 1689257653 installed Building target platforms: x86_64 Building for target x86_64 Wrote: /usr/src/in/nosrpm/zstd-1.5.5-alt1.nosrc.rpm (w1.gzdio) Installing zstd-1.5.5-alt1.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.16757 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf zstd-1.5.5-alt1 + echo 'Source #0 (zstd-1.5.5-alt1.tar):' Source #0 (zstd-1.5.5-alt1.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/zstd-1.5.5-alt1.tar + cd zstd-1.5.5-alt1 + /bin/chmod -c -Rf u+rwX,go-w . + sed -i 's/^\([[:space:]]*\)@\$/\1\$/' Makefile examples/Makefile lib/Makefile programs/Makefile tests/Makefile zlibWrapper/Makefile + rm tests/cli-tests/compression/basic.sh tests/cli-tests/compression/gzip-compat.sh + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.12687 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd zstd-1.5.5-alt1 ++ getconf LFS_CFLAGS + export 'CFLAGS=-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + export 'CXXFLAGS=-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + make -j8 HASH_DIR=zstd_build -C programs zstd-pgo PREFIX=/usr LIBDIR=/usr/lib64 GZFILES= ZSTD_LEGACY_SUPPORT=0 HAVE_ZLIB=0 make[1]: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/programs' Cleaning completed make[1]: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/programs' CC obj/zstd_build/debug.o CC obj/zstd_build/error_private.o CC obj/zstd_build/threading.o CC obj/zstd_build/pool.o CC obj/zstd_build/zstd_common.o CC obj/zstd_build/entropy_common.o CC obj/zstd_build/fse_decompress.o CC obj/zstd_build/xxhash.o CC obj/zstd_build/hist.o CC obj/zstd_build/fse_compress.o CC obj/zstd_build/zstd_compress_literals.o CC obj/zstd_build/zstd_compress_sequences.o CC obj/zstd_build/zstd_compress_superblock.o CC obj/zstd_build/zstd_ldm.o CC obj/zstd_build/huf_compress.o AS obj/zstd_build/huf_decompress_amd64.o CC obj/zstd_build/zstd_opt.o CC obj/zstd_build/zstdmt_compress.o CC obj/zstd_build/zstd_ddict.o CC obj/zstd_build/zstd_fast.o CC obj/zstd_build/zstd_double_fast.o CC obj/zstd_build/zstd_decompress.o CC obj/zstd_build/fastcover.o CC obj/zstd_build/benchfn.o CC obj/zstd_build/zdict.o CC obj/zstd_build/cover.o CC obj/zstd_build/dibio.o CC obj/zstd_build/datagen.o CC obj/zstd_build/divsufsort.o CC obj/zstd_build/fileio_asyncio.o CC obj/zstd_build/zstd_compress.o CC obj/zstd_build/timefn.o CC obj/zstd_build/huf_decompress.o CC obj/zstd_build/benchzstd.o CC obj/zstd_build/zstdcli_trace.o CC obj/zstd_build/fileio.o CC obj/zstd_build/util.o CC obj/zstd_build/zstd_lazy.o CC obj/zstd_build/zstdcli.o CC obj/zstd_build/zstd_decompress_block.o ==> building with threading support ==> no zlib, building zstd without .gz support ==> no liblzma, building zstd without .xz/.lzma support ==> no liblz4, building zstd without .lz4 support LINK obj/zstd_build/zstd zstd build completed make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/programs' |-Synthetic 50% : 10000000 -> |-Synthetic 50% : 10000000 -> 3140424 (x3.184), 1.71 MB/s |-Synthetic 50% : 10000000 -> 3140424 (x3.184), 1.71 MB/s, 1219.4 MB/s 19# |-Synthetic 50% : 10000000 -> |-Synthetic 50% : 10000000 -> 3080678 (x3.246), 5.75 MB/s |-Synthetic 50% : 10000000 -> 3080678 (x3.246), 5.75 MB/s, 1545.9 MB/s 16# |-Synthetic 50% : 10000000 -> |-Synthetic 50% : 10000000 -> 3355994 (x2.980), 39.7 MB/s |-Synthetic 50% : 10000000 -> 3355994 (x2.980), 39.7 MB/s, 890.2 MB/s /-Synthetic 50% : 10000000 -> 3355994 (x2.980), 39.7 MB/s /-Synthetic 50% : 10000000 -> 3355994 (x2.980), 39.7 MB/s, 927.9 MB/s 9# |-Synthetic 50% : 10000000 -> |-Synthetic 50% : 10000000 -> 3230847 (x3.095), 145.9 MB/s |-Synthetic 50% : 10000000 -> 3230847 (x3.095), 145.9 MB/s, 1202.2 MB/s /-Synthetic 50% : 10000000 -> 3230847 (x3.095), 145.9 MB/s /-Synthetic 50% : 10000000 -> 3230847 (x3.095), 145.9 MB/s, 1202.2 MB/s =-Synthetic 50% : 10000000 -> 3230847 (x3.095), 145.9 MB/s =-Synthetic 50% : 10000000 -> 3230847 (x3.095), 145.9 MB/s, 1202.2 MB/s 3# |-Synthetic 50% : 10000000 -> |-Synthetic 50% : 10000000 -> 3327348 (x3.005), 49.4 MB/s |-Synthetic 50% : 10000000 -> 3327348 (x3.005), 49.4 MB/s, 936.9 MB/s /-Synthetic 50% : 10000000 -> 3327348 (x3.005), 51.4 MB/s /-Synthetic 50% : 10000000 -> 3327348 (x3.005), 51.4 MB/s, 942.0 MB/s 7# |-Synthetic 50% : 10000000 -> |-Synthetic 50% : 10000000 -> 3292183 (x3.037), 60.7 MB/s |-Synthetic 50% : 10000000 -> 3292183 (x3.037), 60.7 MB/s, 1035.9 MB/s /-Synthetic 50% : 10000000 -> 3292183 (x3.037), 60.7 MB/s /-Synthetic 50% : 10000000 -> 3292183 (x3.037), 60.7 MB/s, 1035.9 MB/s =-Synthetic 50% : 10000000 -> 3292183 (x3.037), 60.7 MB/s =-Synthetic 50% : 10000000 -> 3292183 (x3.037), 60.7 MB/s, 1035.9 MB/s 5# make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/programs' CC obj/zstd_build/debug.o CC obj/zstd_build/error_private.o CC obj/zstd_build/threading.o CC obj/zstd_build/entropy_common.o CC obj/zstd_build/pool.o CC obj/zstd_build/hist.o CC obj/zstd_build/xxhash.o CC obj/zstd_build/fse_decompress.o CC obj/zstd_build/zstd_common.o CC obj/zstd_build/fse_compress.o CC obj/zstd_build/zstd_compress_literals.o CC obj/zstd_build/zstd_compress_sequences.o CC obj/zstd_build/zstd_compress_superblock.o CC obj/zstd_build/zstd_ldm.o CC obj/zstd_build/huf_compress.o AS obj/zstd_build/huf_decompress_amd64.o CC obj/zstd_build/zstdmt_compress.o CC obj/zstd_build/zstd_ddict.o CC obj/zstd_build/zstd_double_fast.o CC obj/zstd_build/zstd_fast.o CC obj/zstd_build/zstd_opt.o CC obj/zstd_build/cover.o CC obj/zstd_build/zstd_compress.o CC obj/zstd_build/zstd_decompress.o CC obj/zstd_build/benchfn.o CC obj/zstd_build/fastcover.o CC obj/zstd_build/divsufsort.o CC obj/zstd_build/datagen.o CC obj/zstd_build/huf_decompress.o CC obj/zstd_build/timefn.o CC obj/zstd_build/dibio.o CC obj/zstd_build/benchzstd.o CC obj/zstd_build/zdict.o CC obj/zstd_build/fileio_asyncio.o CC obj/zstd_build/zstdcli_trace.o CC obj/zstd_build/zstd_decompress_block.o CC obj/zstd_build/util.o CC obj/zstd_build/zstdcli.o CC obj/zstd_build/fileio.o CC obj/zstd_build/zstd_lazy.o ==> building with threading support ==> no zlib, building zstd without .gz support ==> no liblzma, building zstd without .xz/.lzma support ==> no liblz4, building zstd without .lz4 support LINK obj/zstd_build/zstd zstd build completed + make -j8 -C lib all PREFIX=/usr LIBDIR=/usr/lib64 GZFILES= ZSTD_LEGACY_SUPPORT=0 HAVE_ZLIB=0 make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/lib' creating pkgconfig make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/lib' CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/debug.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/error_private.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/threading.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/entropy_common.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/xxhash.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/pool.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/hist.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_common.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/fse_decompress.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/fse_compress.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_compress_sequences.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_compress_literals.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_compress_superblock.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_ldm.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/huf_compress.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstdmt_compress.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_double_fast.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_ddict.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_fast.o AS obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/huf_decompress_amd64.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_opt.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_decompress.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/cover.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_compress.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/divsufsort.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/fastcover.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/huf_decompress.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zdict.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_decompress_block.o CC obj/conf_8dead7cc9a28f08b9fe1f73fdeb29c00/dynamic/zstd_lazy.o compiling multi-threaded dynamic library 1.5.5 creating versioned links + make -j8 -C contrib/pzstd PREFIX=/usr LIBDIR=/usr/lib64 GZFILES= ZSTD_LEGACY_SUPPORT=0 HAVE_ZLIB=0 make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' cc -MMD -MP -MF util.Td -I../../lib -I../../lib/common -I../../programs -I. -DNDEBUG -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -Wno-deprecated-declarations -c ../../programs/util.c -o ../../programs/util.o mv -f util.Td util.d make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' g++ -MMD -MP -MF SkippableFrame.Td -I../../lib -I../../lib/common -I../../programs -I. -DNDEBUG -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -c SkippableFrame.cpp -o SkippableFrame.o mv -f SkippableFrame.Td SkippableFrame.d make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' g++ -MMD -MP -MF Options.Td -I../../lib -I../../lib/common -I../../programs -I. -DNDEBUG -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -c Options.cpp -o Options.o mv -f Options.Td Options.d make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' g++ -MMD -MP -MF main.Td -I../../lib -I../../lib/common -I../../programs -I. -DNDEBUG -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -c main.cpp -o main.o mv -f main.Td main.d make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' g++ -MMD -MP -MF Pzstd.Td -I../../lib -I../../lib/common -I../../programs -I. -DNDEBUG -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -c Pzstd.cpp -o Pzstd.o mv -f Pzstd.Td Pzstd.d make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' g++ main.o ../../programs/util.o Options.o Pzstd.o SkippableFrame.o ../../lib/libzstd.so -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -pthread -o pzstd make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.50693 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/zstd-buildroot + : + /bin/rm -rf -- /usr/src/tmp/zstd-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/games + cd zstd-1.5.5-alt1 + export CC=false CXX=false + CC=false + CXX=false + for dir in lib programs + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/zstd-buildroot -C lib PREFIX=/usr LIBDIR=/usr/lib64 GZFILES= ZSTD_LEGACY_SUPPORT=0 HAVE_ZLIB=0 make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/lib' Installing shared library Installing includes zstd static and shared library installed make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/lib' + for dir in lib programs + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/zstd-buildroot -C programs PREFIX=/usr LIBDIR=/usr/lib64 GZFILES= ZSTD_LEGACY_SUPPORT=0 HAVE_ZLIB=0 make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/programs' Installing binaries Installing man pages zstd installation completed make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/programs' + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/zstd-buildroot -C contrib/pzstd PREFIX=/usr LIBDIR=/usr/lib64 GZFILES= ZSTD_LEGACY_SUPPORT=0 HAVE_ZLIB=0 make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' install -d -m 755 /usr/src/tmp/zstd-buildroot/usr/bin/ install -m 755 pzstd /usr/src/tmp/zstd-buildroot/usr/bin/pzstd make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/contrib/pzstd' + mkdir -p /usr/src/tmp/zstd-buildroot/lib64 + for f in /usr/src/tmp/zstd-buildroot/usr/lib64/*.so ++ readlink -v /usr/src/tmp/zstd-buildroot/usr/lib64/libzstd.so + t=libzstd.so.1.5.5 + ln -rsnf /usr/src/tmp/zstd-buildroot/lib64/libzstd.so.1.5.5 /usr/src/tmp/zstd-buildroot/usr/lib64/libzstd.so + mv /usr/src/tmp/zstd-buildroot/usr/lib64/libzstd.so.1 /usr/src/tmp/zstd-buildroot/usr/lib64/libzstd.so.1.5.5 /usr/src/tmp/zstd-buildroot/lib64/ + grep -Frsl /usr/local /usr/src/tmp/zstd-buildroot + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/zstd-buildroot (auto) mode of './lib64/libzstd.so.1.5.5' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--) Verifying and fixing files in /usr/src/tmp/zstd-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) /usr/lib64/pkgconfig/libzstd.pc: Cflags: '-I${includedir}' --> '' /usr/lib64/pkgconfig/libzstd.pc: Libs: '-L${libdir} -lzstd' --> '-lzstd' Checking contents of files in /usr/src/tmp/zstd-buildroot/ (default) Compressing files in /usr/src/tmp/zstd-buildroot (auto) removed '/usr/src/tmp/zstd-buildroot/usr/share/man/man1/unzstd.1' '/usr/src/tmp/zstd-buildroot/usr/share/man/man1/unzstd.1.xz' -> 'zstd.1.xz' removed '/usr/src/tmp/zstd-buildroot/usr/share/man/man1/zstdcat.1' '/usr/src/tmp/zstd-buildroot/usr/share/man/man1/zstdcat.1.xz' -> 'zstd.1.xz' Adjusting library links in /usr/src/tmp/zstd-buildroot ./lib64: (from :0) libzstd.so.1 -> libzstd.so.1.5.5 ./usr/lib64: (from :0) Verifying ELF objects in /usr/src/tmp/zstd-buildroot (arch=strict,fhs=strict,lfs=strict,lint=strict,rpath=strict,stack=strict,textrel=strict,unresolved=strict) Executing(%check): /bin/sh -e /usr/src/tmp/rpm-tmp.63050 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd zstd-1.5.5-alt1 ++ getconf LFS_CFLAGS + export 'CFLAGS=-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + export 'CXXFLAGS=-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto ' + make -j8 HASH_DIR=zstd_build -k -C tests test PREFIX=/usr LIBDIR=/usr/lib64 GZFILES= ZSTD_LEGACY_SUPPORT=0 HAVE_ZLIB=0 CC obj/zstd_build/entropy_common.o make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' queueSize==0, numThreads=1 SUCCESS: testOrder SUCCESS: testWait queueSize==1, numThreads=1 SUCCESS: testOrder SUCCESS: testWait queueSize==2, numThreads=1 SUCCESS: testOrder SUCCESS: testWait queueSize==0, numThreads=2 SUCCESS: testOrder SUCCESS: testWait queueSize==1, numThreads=2 SUCCESS: testOrder SUCCESS: testWait queueSize==2, numThreads=2 SUCCESS: testOrder SUCCESS: testWait queueSize==0, numThreads=3 SUCCESS: testOrder SUCCESS: testWait queueSize==1, numThreads=3 SUCCESS: testOrder SUCCESS: testWait queueSize==2, numThreads=3 SUCCESS: testOrder SUCCESS: testWait queueSize==0, numThreads=4 SUCCESS: testOrder SUCCESS: testWait queueSize==1, numThreads=4 SUCCESS: testOrder SUCCESS: testWait queueSize==2, numThreads=4 SUCCESS: testOrder SUCCESS: testWait SUCCESS: thread reduction effective SUCCESS: all jobs in queue completed on early end PASS: all POOL tests make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' ==> building with threading support ==> no zlib, building zstd without .gz support ==> no liblzma, building zstd without .xz/.lzma support ==> no liblz4, building zstd without .lz4 support LINK obj/zstd_build/zstd zstd build completed make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' ../lib/legacy/zstd_v02.c: In function 'ZSTDv02_createDCtx': ../lib/legacy/zstd_v02.c:3456:27: warning: dereferencing type-punned pointer might break strict-aliasing rules [-Wstrict-aliasing] 3456 | return (ZSTDv02_Dctx*)ZSTD_createDCtx(); | ^~~~~~~~~~~~~~~~~ ../lib/legacy/zstd_v03.c: In function 'ZSTDv03_createDCtx': ../lib/legacy/zstd_v03.c:3096:27: warning: dereferencing type-punned pointer might break strict-aliasing rules [-Wstrict-aliasing] 3096 | return (ZSTDv03_Dctx*)ZSTD_createDCtx(); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' Simple API OK Streaming API OK Frame Decoding OK OK make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' seed: 28321 0 3 4 8 11 16 20 25 28 31 34 37 40 46 50 53 56 61 67 74 78 84 87 92 99 101 107 110 114 117 123 128 133 138 141 143 145 147 149 152 157 161 166 169 173 177 179 182 185 188 191 194 197 200 204 208 209 211 219 223 226 229 233 235 238 240 243 246 249 255 259 261 264 266 268 270 272 275 279 282 285 287 290 294 298 302 305 309 311 315 319 324 328 330 333 334 336 339 341 343 347 351 353 355 357 360 364 370 373 376 379 382 386 391 395 397 401 404 407 409 412 415 418 420 423 426 429 433 436 441 444 448 452 455 461 463 465 468 471 473 476 479 480 tests completed: OK make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' ../programs/zstd: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=c281d93ca935e42e1bc19ee6a88c38e75abede86, for GNU/Linux 3.2.0, with debug_info, not stripped PASS: zstd-symlinks/zstdcat.sh ---------------------------------------- PASS: progress/no-progress.sh ---------------------------------------- PASS: progress/progress.sh ---------------------------------------- PASS: file-stat/compress-file-to-dir-without-write-perm.sh ---------------------------------------- PASS: file-stat/compress-file-to-file.sh ---------------------------------------- PASS: file-stat/compress-file-to-stdout.sh ---------------------------------------- PASS: file-stat/compress-stdin-to-file.sh ---------------------------------------- PASS: file-stat/compress-stdin-to-stdout.sh ---------------------------------------- PASS: file-stat/decompress-file-to-file.sh ---------------------------------------- PASS: file-stat/decompress-file-to-stdout.sh ---------------------------------------- PASS: file-stat/decompress-stdin-to-file.sh ---------------------------------------- PASS: file-stat/decompress-stdin-to-stdout.sh ---------------------------------------- PASS: dictionaries/dictionary-mismatch.sh ---------------------------------------- PASS: dictionaries/golden.sh ---------------------------------------- PASS: dict-builder/empty-input.sh ---------------------------------------- PASS: dict-builder/no-inputs.sh ---------------------------------------- PASS: decompression/golden.sh ---------------------------------------- PASS: decompression/pass-through.sh ---------------------------------------- PASS: compression/adapt.sh ---------------------------------------- PASS: compression/compress-literals.sh ---------------------------------------- PASS: compression/format.sh ---------------------------------------- PASS: compression/golden.sh ---------------------------------------- PASS: compression/levels.sh ---------------------------------------- PASS: compression/long-distance-matcher.sh ---------------------------------------- PASS: compression/multi-threaded.sh ---------------------------------------- PASS: compression/multiple-files.sh ---------------------------------------- PASS: compression/row-match-finder.sh ---------------------------------------- PASS: compression/stream-size.sh ---------------------------------------- PASS: compression/verbose-wlog.sh ---------------------------------------- PASS: compression/window-resize.sh ---------------------------------------- PASS: cltools/zstdgrep.sh ---------------------------------------- FAIL: cltools/zstdless.sh FAIL: cltools/zstdless.sh.check_exit Exit code mismatch! Expected 0 but got 1 FAIL: cltools/zstdless.sh.check_stderr stderr does not match! > diff expected actual 1,2d0 < zstd: can't stat bad.zst : No such file or directory -- ignored < bad.zst: No such file or directory FAIL: cltools/zstdless.sh.check_stdout stdout does not match! > diff expected actual --- < 1234 > 1 --- < + pass parameters < 1234 < + bad path ---------------------------------------- PASS: basic/help.sh ---------------------------------------- PASS: basic/memlimit.sh ---------------------------------------- PASS: basic/output_dir.sh ---------------------------------------- PASS: basic/version.sh ---------------------------------------- FAIL: cltools/zstdless.sh FAILED 1 / 36 tests! make: *** [Makefile:349: test-cli-tests] Error 1 make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' *** Zstandard speed analyzer 1.5.5 64-bits, by Yann Collet (Apr 4 2023) *** Sample 10000000 bytes : 1#compress : 130.9 MB/s ( 3154228) 2#decompress : 467.3 MB/s (10000000) 3#compress_freshCCtx : 130.6 MB/s ( 3154228) 11#compressContinue : 177.1 MB/s ( 3154228) 11#compressContinue : 222.7 MB/s ( 3154228) 12#compressContinue_extDict : 131.0 MB/s ( 3154266) 13#decompressContinue : 553.1 MB/s (10000000) 30#decodeLiteralsHeader : 36423.6 MB/s ( 44) 30#decodeLiteralsHeader : 45812.2 MB/s ( 44) 31#decodeLiteralsBlock : 1066.4 MB/s ( 36979) 31#decodeLiteralsBlock : 1135.4 MB/s ( 36979) 32#decodeSeqHeaders : 19132.9 MB/s ( 73) 41#compressStream : 88.4 MB/s ( 3154231) 42#decompressStream : 642.9 MB/s (10000000) 42#decompressStream : 870.7 MB/s (10000000) 43#compressStream_freshCCtx : 216.8 MB/s ( 3154231) 50#compress2 : 188.1 MB/s ( 3154228) 51#compressStream2, end : 213.5 MB/s ( 3154228) 52#compressStream2, end & short : 306.3 MB/s ( 3154223) 53#compressStream2, continue : 202.4 MB/s ( 3154231) 61#compress_generic, -T2, contin: 349.9 MB/s ( 3152992) 62#compress_generic, -T2, end : 292.5 MB/s ( 3152996) 62#compress_generic, -T2, end : 292.5 MB/s ( 3152996) *** Zstandard speed analyzer 1.5.5 64-bits, by Yann Collet (Apr 4 2023) *** Sample 10000000 bytes : 1#compress : 1176.9 MB/s (10000241) 2#decompress : 2940.5 MB/s (10000000) 2#decompress : 2940.5 MB/s (10000000) 3#compress_freshCCtx : 875.3 MB/s (10000241) 11#compressContinue : 1083.0 MB/s (10000241) 12#compressContinue_extDict : 1187.4 MB/s (10000223) 13#decompressContinue : 1991.7 MB/s (10000000) ZSTD_decodeLiteralsBlock : impossible to test on this sample (not compressible) ZSTD_decodeLiteralsBlock : impossible to test on this sample (not compressible) ZSTD_decodeSeqHeaders : impossible to test on this sample (not compressible) 41#compressStream : 802.6 MB/s (10000237) 42#decompressStream : 2128.3 MB/s (10000000) 43#compressStream_freshCCtx : 1227.1 MB/s (10000237) 43#compressStream_freshCCtx : 1432.4 MB/s (10000237) 50#compress2 : 1739.7 MB/s (10000241) 51#compressStream2, end : 1658.4 MB/s (10000241) 52#compressStream2, end & short : 1298.8 MB/s (10000241) 53#compressStream2, continue : 1280.6 MB/s (10000237) 61#compress_generic, -T2, contin: 748.2 MB/s (10000237) 62#compress_generic, -T2, end : 1073.5 MB/s (10000241) make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' Starting zstream tester (64-bits, 1.5.5) Seed = 7686 creating dictionary for unit tests Trying 5 different sets of parameters 40% 80% test 1 : compress 10485760 bytes : OK (3308743 bytes) test 2 : skipframe + compress 10485760 bytes : OK (3464494 bytes : 33.04%) test 3 : estimate CStream size : OK (1613881 bytes) test 4 : estimate CStream size using CCtxParams : OK test 5 : check actual CStream size : OK (1581113 bytes) test 6 : use bad compression parameters with ZSTD_initCStream_advanced : init error : Parameter is out of bound test 7 : decompress skippable frame : OK test 8 : decompress 10485760 bytes : OK test 9 : decompress again without init (re-use previous settings): OK test 10 : check decompressed result : OK test 11 : early decompression error if first bytes are incorrect : OK test 12 : estimate DStream size : OK (1171968 bytes) test 13 : check actual DStream size : OK (1171968 bytes) test 14 : decompress byte-by-byte : OK test 15 : check decompressed result : OK test 16 : generate error when ZSTD_decompressStream() doesn't progress : OK test 17 : NULL output and NULL input : OK test 18 : NULL output buffer with non-NULL input : OK test 19 : compress_srcSize 10485760 bytes : OK (3464494 bytes : 33.04%) test 20 : too large srcSize : 10485759 bytes : OK (error detected : Src size is incorrect) test 21 : too small srcSize : 10485759 bytes : OK (error detected : Src size is incorrect) test 22 : wrong srcSize !contentSizeFlag : 10485759 bytes : OK (error detected : Src size is incorrect) test 23 : context re-use : OK test 24 : ZSTD_decompressStream() single pass on empty frame : OK test 25 : ZSTD_decompressStream() single pass : OK test 26 : ZSTD_decompressStream() stable out buffer : OK test 27 : ZSTD_decompressStream() stable out buffer too small : OK test 28 : ZSTD_decompressStream() stable out buffer modified : OK test 29 : ZSTD_decompressStream() buffered output : OK test 30 : ZSTD_compress2() uses stable input and output : OK test 31 : ZSTD_compress2() doesn't modify user parameters : OK test 32 : ZSTD_compressStream2() with ZSTD_c_stableInBuffer and ZSTD_c_stableOutBuffer : OK test 33 : ZSTD_compressStream2() ZSTD_c_stableInBuffer and ZSTD_c_stableOutBuffer allocated size : OK test 34 : ZSTD_compressStream2() with ZSTD_c_stableInBuffer only : OK test 35 : ZSTD_compressStream2() ZSTD_c_stableInBuffer modify buffer : OK test 36 : ZSTD_c_stableInBuffer compatibility with compressStream, flushStream and endStream : OK test 37 : ZSTD_c_stableInBuffer compatibility with compressStream2, using different end directives : OK test 38 : ZSTD_compressStream2() with ZSTD_c_stableInBuffer: context size : OK test 39 : ZSTD_compressStream2() with ZSTD_c_stableOutBuffer only : OK test 40 : ZSTD_compressStream2() ZSTD_c_stableOutBuffer modify buffer : OK test 41 : ZSTD_compressStream2() with ZSTD_c_stableOutBuffer: context size : OK test 42 : digested dictionary : OK (3366659 bytes : 32.11%) test 43 : check CStream size : OK (1336825 bytes) test 44 : decompress 10485760 bytes with digested dictionary : OK test 45 : maxWindowSize < frame requirement : OK (Dictionary mismatch) test 46 : dictionary source size and level : OK test 47 : ZSTD_decompressStream() with dictionary : OK test 48 : ZSTD_resetDStream() with dictionary : OK test 49 : ZSTD_decompressStream() with ddict : OK test 50 : ZSTD_decompressDCtx() with prefix : OK test 51 : ZSTD_initDStream*() with dictionary : OK test 52 : ZSTD_initCStream_usingCDict_advanced with masked dictID : OK (3306978 bytes : 31.54%) test 53 : try retrieving dictID from frame : OK (not detected) test 54 : decompress without dictionary : OK (Data corruption detected) test 55 : compress with ZSTD_CCtx_refPrefix : OK (3382834 bytes : 32.26%) test 56 : decompress with ZSTD_DCtx_refPrefix : OK test 57 : decompress without dictionary (should fail): OK (Data corruption detected) test 58 : compress again with ZSTD_compressStream2 : OK (3389325 bytes : 32.32%) test 59 : decompress without dictionary (should work): OK test 60 : ZSTD_initCStream_advanced with pledgedSrcSize=0 and dict : OK test 61 : pledgedSrcSize == 0 behaves properly with ZSTD_initCStream_advanced : OK test 62 : compress 10485760 bytes with multiple threads : OK test 63 : compress 8388608 bytes with multiple threads + dictionary : OK test 64 : decompress large frame created from multiple threads + dictionary : OK test 65 : check dictionary FSE tables can represent every code : OK test 66 : ZSTD_initCStream_srcSize sets requestedParams : OK test 67 : ZSTD_initCStream_advanced sets requestedParams : OK test 68 : ZSTD_c_srcSizeHint bounds : OK test 69 : ZSTD_lazy compress with hashLog = 29 and searchLog = 4 : OK test 70 : Test offset == windowSize : OK test 71 : wildcopy doesn't overwrite potential match data : OK test 72 : decompress blocks with small sequences section : OK test 73 : raw block can be streamed: OK test 74 : dictionary + uncompressible block + reusing tables checks offset table validity: OK test 75 : dictionary + small blocks + reusing tables checks offset table validity: OK test 76 : Block-Level External Sequence Producer API: OK test 77 : Testing maxBlockSize PR#3418: OK test 78 : Testing sequence validation: OK test 79 : Testing large offset with small window size: OK 1/ 1 7 18 21 22 28 34 36 56 60 72 81 87 123 130 138 143 150 151 161 163 173 174 206 213 228 260 274 279 297 316 325 341 350 363 375 376 378 391 395 440 441 446 457 460 478 498 499 502 524 537 545 553 559 567 581 588 603 604 615 622 640 650 653 688 690 708 723 739 743 760 761 770 777 816 820 827 831 841 843 866 875 878 886 893 904 916 921 935 941 954 972 993 996 1001 1011 1020 1023 1026 1027 1033 1037 1067 1069 fuzzer tests completed Starting zstream tester (64-bits, 1.5.5) Seed = 4844 1/ 1 18 71 72 87 91 100 108 129 131 133 134 142 166 178 189 194 197 215 230 232 246 255 273 283 284 286 296 305 325 349 367 386 396 429 457 464 490 505 514 515 521 543 553 557 574 603 609 611 615 630 633 645 673 683 707 715 730 740 748 767 783 788 789 794 803 813 814 820 827 839 858 862 875 876 888 895 898 900 914 917 933 939 963 973 975 984 1010 1047 1059 1087 1140 1147 1155 1178 1187 1190 1200 1215 1227 1231 1251 1266 1268 1331 1358 1363 1396 1397 1406 1420 1448 1453 1461 1467 1477 1484 1485 1486 1495 1505 1518 1530 1538 1551 1558 1572 1603 1638 1649 1652 1658 1684 1685 1686 1701 1713 1717 1722 1727 1737 1748 1777 1783 1790 1792 1798 1810 1838 1851 1856 1893 1898 1915 1919 1931 1955 1982 2013 2049 2070 2081 2086 2091 2092 2104 2109 2129 2139 2152 2159 2170 2220 2225 2229 2230 2241 2252 2259 2266 2282 2293 2301 2314 2337 2352 2354 2358 2367 2370 2374 2396 2399 2411 2413 2420 2437 2440 fuzzer tests completed make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' Starting zstd tester (64-bits, 1.5.5) Seed = 5626 test 0 : ZSTD_getErrorName : OK : No error detected test 1 : ZSTD_getErrorName with wrong value : OK : No error detected test 2 : min compression level : -131072 (OK) test 3 : default compression level : 3 (OK) test 4 : ZSTD_versionNumber : 10505 (OK) test 5 : compressBound : OK test 6 : decompressBound : OK test 7 : ZSTD_CCtx_setCParams : OK test 8 : ZSTD_adjustCParams : OK test 9 : compress 5242880 bytes : OK (1652599 bytes : 31.52%) test 10 : size of cctx for level 1 : 582648 bytes test 11 : decompress skippable frame -8 size : OK test 12 : ZSTD_getFrameContentSize test : OK test 13 : ZSTD_getDecompressedSize test : OK test 14 : ZSTD_findDecompressedSize test : OK test 15 : tight ZSTD_decompressBound test : OK test 16 : ZSTD_decompressBound test with invalid srcSize : OK test 17 : decompress 5242880 bytes : OK test 18 : decompress 5242880 bytes with Huffman assembly disabled : OK test 19 : check decompressed result : OK test 20 : invalid endDirective : OK test 21 : ZSTD_checkCParams : OK test 22 : ZSTD_createDCtx_advanced and ZSTD_sizeof_DCtx: OK test 23 : misc unaccounted for zstd symbols : 0x55ed23c25500 0x55ed23c26500 0x55ed23c25760 0x55ed23c25640 : OK test 24 : decompress with null dict : OK test 25 : decompress with null DDict : OK test 26 : decompress with 1 missing byte : OK test 27 : decompress with 1 too much byte : OK test 28 : decompress too large input : OK test 29 : decompress into NULL buffer : OK test 30 : decompress with corrupted checksum : OK test 31 : ZSTD_decompressBound test with content size missing : OK test 32: check DCtx size is reduced after many oversized calls : OK test 33 : ZSTD_compressCCtx() doesn't use advanced parametersOK test 34 : ZSTD_compress_usingDict() doesn't use advanced parameters: OK test 35 : ZSTD_compress_usingCDict() doesn't use advanced parameters: OK test 36 : ZSTD_compress_advanced() doesn't use advanced parameters: OK test 37 : ZSTD_compress_usingCDict_advanced() doesn't use advanced parameters: OK test 38 : ldm fill dict out-of-bounds checkOK test 39 : testing dict compression with enableLdm and forceMaxWindow : OK test 40 : testing dict compression for determinism : OK test 41 : LDM + opt parser with small uncompressible block OK test 42 : testing ldm dictionary gets invalidated : OK test 43 : testing refPrefx vs refPrefx + ldm (size comparison) : OK test 44 : in-place decompression : OK test 45 : in-place decompression with 2 frames : OK test 46 : Check block splitter with 64K literal length : OK test 47: superblock uncompressible data, too many nocompress superblocks : OK test 48: superblock with no literals : OK test 49: superblock enough room for checksum : OK test 50 : compress a NULL input with each level : OK test 51 : check CCtx size after compressing empty input : OK test 52 : decompress empty frame into NULL : OK test 53 : re-use CCtx with expanding block size : OK test 54 : re-using a CCtx should compress the same : OK test 55 : btultra2 & 1st block : OK test 56 : ZSTD_CCtx_getParameter() : OK test 57 : ZSTD_CCtx_setCParams() : test 58 : ZSTD_CCtx_setFParams() : test 59 : ZSTD_CCtx_setCarams() : test 60 : ldm conditionally enabled by default doesn't change cctx params: OK test 61 : overflow protection with large windowLog : OK test 62 : size down context : OK test 63 : create static CCtx for level 4 : OK test 64 : compress small input with small static CCtx : OK (9522 bytes : 29.06%) test 65 : compress large input with small static CCtx (must fail) : OK test 66 : resize context to full CCtx size : OK test 67 : compress large input with static CCtx : OK (1748991 bytes : 33.36%) test 68 : compress small input often enough to trigger context reduce : OK test 69 : init CCtx for level 4 : OK test 70 : compression again with static CCtx : OK (1748991 bytes : 33.36%) test 71 : simple decompression test with static DCtx : OK test 72 : check decompressed result : OK test 73 : init CCtx for too large level (must fail) : OK test 74 : init CCtx for small level 1 (should work again) : OK test 75 : use CStream on CCtx-sized static context (should fail) : OK test 76 : resize context to CStream size, then stream compress : OK test 77 : CStream for small level 1 : OK test 78 : init static CStream with dictionary (should fail) : OK test 79 : use DStream on DCtx-sized static context (should fail) : OK test 80 : test estimation functions with default cctx params : OK test 81 : test estimation functions with maxBlockSize = 0 : OK test 82 : Static context sizes for negative levels : OK test 83 : create ZSTDMT CCtx : OK test 84 : compress 5242880 bytes with 2 threads : OK (1651984 bytes : 31.51%) test 85 : decompressed size test : OK test 86 : decompress 5242880 bytes : OK test 87 : check decompressed result : OK test 88 : compress -T2 with checksum : OK (1654945 bytes : 31.57%) test 89 : decompress 5242880 bytes : OK test 90 : compress empty string and decompress with small window log : OK (9 bytes) test 91 : compress with block splitting : OK test 92 : compress -T2 with/without literals compression : OK test 93 : Multithreaded ZSTD_compress2() with rsyncable : OK test 94 : setting multithreaded parameters : OK test 95 : compress multiple frames : OK test 96 : get decompressed size of multiple frames : OK test 97 : get tight decompressed bound of multiple frames : OK test 98 : decompress multiple frames : OK test 99 : check decompressed result : OK test100 : read/write a skippable frame : OK test101 : read/write an empty skippable frame : OK test102 : copy context too soon : OK test103 : load dictionary into context : OK test104 : compress with flat dictionary : OK (2600638 bytes : 49.60%) test105 : frame built with flat dictionary should be decompressible : OK test106 : compress with duplicated context : OK (2600638 bytes : 49.60%) test107 : frame built with duplicated context should be decompressible : OK test108 : decompress with DDict : OK (size of DDict : 27903) test109 : decompress with static DDict : OK (size of static DDict : 27903) test110 : check content size on duplicated context : OK test111 : flat-dictionary efficiency test : test112 : dictBuilder on cyclic data : Trying 5 different sets of parameters 20% OK, created dictionary of size 390 test113 : dictBuilder : Trying 5 different sets of parameters 100% OK, created dictionary of size 16384 test114 : Multithreaded COVER dictBuilder : OK, created dictionary of size 16384 test115 : COVER dictBuilder with shrinkDict: OK, created dictionary of size 16384 test116 : Multithreaded FASTCOVER dictBuilder : OK, created dictionary of size 16384 test117 : FASTCOVER dictBuilder with shrinkDict: OK, created dictionary of size 16384 test118 : check dictID : OK : 2146929252 test119 : check dict header size no error : OK : 150 test120 : check dict header size correctness : OK : 115 test121 : compress with dictionary : OK (1741942 bytes : 33.22%) test122 : retrieve dictID from dictionary : OK test123 : retrieve dictID from frame : OK test124 : frame built with dictionary should be decompressible : OK test125 : estimate CDict size : OK : 113216 test126 : compress with CDict (size : 80448) : OK (1650888 bytes : 31.49%) test127 : retrieve dictID from frame : OK test128 : frame built with dictionary should be decompressible : OK test129 : compress with static CDict : OK (1889 bytes : 0.04%) test130 : ZSTD_compress_usingCDict_advanced, no contentSize, no dictID : OK (1650884 bytes : 31.49%) test131 : try retrieving contentSize from frame : OK (unknown) test132 : frame built without dictID should be decompressible : OK test133 : ZSTD_compress_advanced, no dictID : OK (1686816 bytes : 32.17%) test134 : frame built without dictID should be decompressible : OK test135 : dictionary containing only header should return error : OK test136 : bufferless api with cdict : OK test137 : Building cdict w/ ZSTD_dct_fullDict on a good dictionary : OK test138 : Building cdict w/ ZSTD_dct_fullDict on a rawContent (must fail) : OK test139 : Loading rawContent starting with dict header w/ ZSTD_dct_auto should fail : OK test140 : Loading rawContent starting with dict header w/ ZSTD_dct_rawContent should pass : OK test141 : Testing non-attached CDict with ZSTD_dct_rawContent : OK test142 : ZSTD_CCtx_refCDict() then set parameters : OK test143 : Loading dictionary before setting parameters is the same as loading after : OK test144 : Loading a dictionary clears the prefix : OK test145 : Loading a dictionary clears the cdict : OK test146 : Loading a cdict clears the prefix : OK test147 : Loading a cdict clears the dictionary : OK test148 : Loading a prefix clears the dictionary : OK test149 : Loading a prefix clears the cdict : OK test150 : Loaded dictionary persists across reset session : OK test151 : Loaded dictionary is cleared after resetting parameters : OK test152 : ZSTD_decompressDCtx() with dictionary : OK test153 : ZSTD_decompressDCtx() with ddict : OK test154 : ZSTD_decompressDCtx() with prefix : OK test155 : ZSTD_fast attach dictionary with hashLog = 25 and chainLog = 25 : OK test156 : ZSTD_dfast attach dictionary with hashLog = 25 and chainLog = 25 : OK test157 : ZSTD_lazy attach dictionary with hashLog = 29 and searchLog = 4 : OK test158 : Dictionary with non-default repcodes : Trying 5 different sets of parameters 20% OK test159 : ZSTD_decompressDCtx() with multiple ddicts : OK test160 : ZDICT_trainFromBuffer_cover : OK, created dictionary of size 16384 test161 : check dictID : OK : 297824531 test162 : ZDICT_optimizeTrainFromBuffer_cover : OK, created dictionary of size 16384 test163 : check dictID : OK : 603460011 test164 : Check input length for magic number : OK test165 : Check magic Number : OK test166 : Content size verification : OK : Src size is incorrect test167 : negative compression level : OK test168 : parameters in order : OK (compress : 2621440 -> 811117 bytes) test169 : parameters disordered : OK (compress : 2621440 -> 811117 bytes) test170 : get dParameter bounds OK test171 : wrong dParameter : OK test172 : out of bound dParameter : OK test173 : magic-less format test : OK (compress : 2621440 -> 843714 bytes) test174 : decompress normally (should fail) : OK : Unknown frame descriptor test175 : decompress of magic-less frame : one-shot OK, streaming OK : regenerated 2621440 bytes test176 : empty magic-less format test : OK (compress : 0 -> 5 bytes) test177 : decompress of empty magic-less frame : one-shot OK, streaming OK : regenerated 0 bytes test178 : Decompression parameter reset test : OK test179 : Block compression test : OK test180 : Block decompression test : OK test181 : Huge block streaming compression test : OK test182 : Dictionary Block compression test : OK test183 : Dictionary Block decompression test : OK test184 : Block compression with CDict : OK test185 : Long RLE test : OK test186 : ZSTD_generateSequences decode from sequences test : OK test187 : ZSTD_getSequences followed by ZSTD_compressSequences : OK test188 : compress 1000000 zeroes : OK (51 bytes : 0.01%) test189 : decompress 1000000 zeroes : OK test190 : compress 100 zeroes : OK (17 bytes : 17.00%) test191 : decompress 100 zeroes : OK test192 : growing nbSeq : OK test193 : compress lots 3-bytes sequences : OK (67694 bytes : 51.67%) test194 : decompress lots 3-bytes sequence : OK test195 : growing literals buffer : OK test196 : incompressible data and ill suited dictionary : Trying 5 different sets of parameters 20% OK test197 : frame compressed size of skippable frame : OK test198 : testing ZSTD error code strings : OK test199 : testing ZSTD dictionary sizes : OK test200 : testing FSE_normalizeCount() PR#1255: OK test201 : testing FSE_writeNCount() PR#2779: OK test202 : testing bitwise intrinsics PR#3045: OK test203 : passing wrong full dict should fail on compressStream2 refPrefix OK test204 : small dictionary with multithreading and LDM OK test205 : ZSTD_getCParams() + dictionary OK test206 : ZSTD_adjustCParams() + dictionary OK test207 : check compression mem usage monotonicity over levels for estimateCCtxSize() : OK test208 : check estimateCCtxSize() always larger or equal to ZSTD_estimateCCtxSize_usingCParams() : OK test209 : thread pool API tests : thread pool test : threadPool re-use roundtrips: OK thread pool test : threadPool simultaneous usage: OK thread pool tests OK 1 4 8 12 14 15 24 26 35 46 50 65 68 75 80 85 96 100 113 116 120 124 125 132 139 146 153 159 165 167 172 176 178 180 188 190 195 197 204 206 207 218 226 229 231 236 242 246 250 253 261 264 266 272 278 280 285 292 294 309 311 312 314 321 324 333 335 338 340 348 360 362 364 370 373 374 375 380 388 389 391 396 406 407 410 413 417 422 423 424 433 439 448 450 456 464 466 467 472 481 485 487 488 489 497 498 505 509 512 517 525 527 531 533 538 542 546 551 554 559 563 570 574 583 590 594 599 605 606 607 613 622 629 634 638 640 641 642 645 655 666 672 676 680 686 690 696 698 699 700 710 722 737 743 746 753 760 764 776 784 788 792 801 805 817 822 824 827 834 838 843 846 849 854 858 861 865 867 877 884 889 892 902 911 918 925 937 946 957 963 967 972 976 982 992 993 996 1004 1007 1012 1017 1024 1033 1049 1056 1061 1062 1079 1080 1086 1092 1101 1107 1116 1127 1129 1133 1138 1147 1152 1154 1175 1177 1180 1189 1194 1197 1215 1219 1222 1230 1238 1240 1243 1250 1253 1258 1265 1272 1276 1278 1287 1291 1304 1311 1313 1319 1321 1327 1338 1347 1355 1362 1372 1380 1387 1393 1398 1402 1405 1413 1418 1423 1430 1445 1448 1457 1466 1478 1492 1496 1502 1509 1514 1522 1532 1533 1547 1555 1562 1565 1568 1581 1589 1590 1596 1607 1614 1618 1621 1623 1624 1630 1632 1635 1639 1641 1648 1656 1658 1663 1668 1670 1675 1682 1690 1695 1698 1706 1714 1715 1719 1724 1727 1733 1737 1744 1752 1762 1766 1773 1776 1791 1796 1800 1802 1811 1819 1820 1829 1837 1838 1845 1846 1851 1871 1882 1884 1893 1894 1896 1900 1904 1910 1917 1929 1939 1942 1946 1954 1956 1958 1964 1984 1989 1994 2000 2010 2014 2021 2027 2030 2035 2044 2051 2053 2056 2060 2072 2076 2080 2084 2088 2090 2094 2096 2100 2105 2106 2108 2114 2128 2132 2138 2143 2146 2152 2154 2163 2164 2169 2170 2174 2175 2181 2182 2187 2191 2196 2198 2208 2219 2230 2238 2241 2244 2250 2252 2254 2272 2276 2277 2282 2288 2289 2296 2302 2312 2322 2327 2337 2339 2345 2349 2350 2352 2359 2366 2368 2369 2370 2375 2383 2387 2394 2404 2407 2418 2423 2433 2437 2446 2450 2456 2459 2469 2481 2487 2488 2490 2492 2496 2502 2503 2505 2510 2520 2525 2531 2541 2549 2559 2560 2569 2572 2574 2588 2590 2593 2603 2610 2620 2636 2644 2646 2660 2661 2672 2681 2687 2696 2699 2700 2702 2703 2716 2724 2730 2738 2744 2748 2760 2762 2767 2768 2774 2776 2780 2784 2789 2800 2807 2820 2824 2834 2839 2848 2851 2857 fuzzer tests completed make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Entering directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' ../programs/zstd: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=c281d93ca935e42e1bc19ee6a88c38e75abede86, for GNU/Linux 3.2.0, with debug_info, not stripped Starting playTests.sh isWindows=false EXE_PREFIX='' ZSTD_BIN='../programs/zstd' DATAGEN_BIN='./datagen' *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** *** supports: zstd zlib version Unsupported lz4 version Unsupported lzma version Unsupported _POSIX_C_SOURCE defined: 200809L _POSIX_VERSION defined: 200809L PLATFORM_POSIX_VERSION defined: 200809L ===> simple tests Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. Advanced options: -c, --stdout Write to STDOUT (even if it is a console) and keep the INPUT file(s). -v, --verbose Enable verbose output; pass multiple times to increase verbosity. -q, --quiet Suppress warnings; pass twice to suppress errors. --trace LOG Log tracing information to LOG. --[no-]progress Forcibly show/hide the progress counter. NOTE: Any (de)compressed output to terminal will mix with progress counter text. -r Operate recursively on directories. --filelist LIST Read a list of files to operate on from LIST. --output-dir-flat DIR Store processed files in DIR. --output-dir-mirror DIR Store processed files in DIR, respecting original directory structure. --[no-]asyncio Use asynchronous IO. [Default: Enabled] --[no-]check Add XXH64 integrity checksums during compression. [Default: Add, Validate] If `-d` is present, ignore/validate checksums during decompression. -- Treat remaining arguments after `--` as files. Advanced compression options: --ultra Enable levels beyond 19, up to 22; requires more memory. --fast[=#] Use to very fast compression levels. [Default: 1] --adapt Dynamically adapt compression level to I/O conditions. --long[=#] Enable long distance matching with window log #. [Default: 27] --patch-from=REF Use REF as the reference point for Zstandard's diff engine. -T# Spawn # compression threads. [Default: 1; pass 0 for core count.] --single-thread Share a single thread for I/O and compression (slightly different than `-T1`). --auto-threads={physical|logical} Use physical/logical cores when using `-T0`. [Default: Physical] -B# Set job size to #. [Default: 0 (automatic)] --rsyncable Compress using a rsync-friendly method (`-B` sets block size). --exclude-compressed Only compress files that are not already compressed. --stream-size=# Specify size of streaming input from STDIN. --size-hint=# Optimize compression parameters for streaming input of approximately size #. --target-compressed-block-size=# Generate compressed blocks of approximately # size. --no-dictID Don't write `dictID` into the header (dictionary compression only). --[no-]compress-literals Force (un)compressed literals. --[no-]row-match-finder Explicitly enable/disable the fast, row-based matchfinder for the 'greedy', 'lazy', and 'lazy2' strategies. --format=zstd Compress files to the `.zst` format. [Default] --mmap-dict Memory-map dictionary file rather than mallocing and loading all at once Advanced decompression options: -l Print information about Zstandard-compressed files. --test Test compressed file integrity. -M# Set the memory usage limit to # megabytes. --[no-]sparse Enable sparse mode. [Default: Enabled for files, disabled for STDOUT.] --[no-]pass-through Pass through uncompressed files as-is. [Default: Disabled] Dictionary builder: --train Create a dictionary from a training set of files. --train-cover[=k=#,d=#,steps=#,split=#,shrink[=#]] Use the cover algorithm (with optional arguments). --train-fastcover[=k=#,d=#,f=#,steps=#,split=#,accel=#,shrink[=#]] Use the fast cover algorithm (with optional arguments). --train-legacy[=s=#] Use the legacy algorithm with selectivity #. [Default: 9] -o NAME Use NAME as dictionary name. [Default: dictionary] --maxdict=# Limit dictionary to specified size #. [Default: 112640] --dictID=# Force dictionary ID to #. [Default: Random] Benchmark options: -b# Perform benchmarking with compression level #. [Default: 3] -e# Test all compression levels up to #; starting level is `-b#`. [Default: 1] -i# Set the minimum evaluation to time # seconds. [Default: 3] -B# Cut file into independent chunks of size #. [Default: No chunking] -S Output one benchmark result per input file. [Default: Consolidated result] --priority=rt Set process priority to real-time. *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** test : basic compression tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) test : basic decompression tmp.zst : 65537 bytes test : too large compression level => auto-fix Warning : compression level higher than max, reduced to 19 tmp : 31.53% ( 64.0 KiB => 20.2 KiB, tmp.zst) error: numeric value overflows 32-bit unsigned int test : --fast aka negative compression levels tmp : 56.03% ( 64.0 KiB => 35.9 KiB, tmp.zst) tmp : 56.58% ( 64.0 KiB => 36.2 KiB, tmp.zst) tmp :100.02% ( 64.0 KiB => 64.0 KiB, tmp.zst) error: numeric value overflows 32-bit unsigned int Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. test : too large numeric argument error: numeric value overflows 32-bit unsigned int test : set compression level with environment variable ZSTD_CLEVEL tmp : 33.15% ( 64.0 KiB => 21.2 KiB, tmp.zst) tmp : 61.49% ( 64.0 KiB => 39.4 KiB, tmp.zst) tmp : 33.15% ( 64.0 KiB => 21.2 KiB, tmp.zst) Ignore environment variable setting ZSTD_CLEVEL=: not a valid integer value tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) Ignore environment variable setting ZSTD_CLEVEL=-: not a valid integer value tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) Ignore environment variable setting ZSTD_CLEVEL=a: not a valid integer value tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) Ignore environment variable setting ZSTD_CLEVEL=+a: not a valid integer value tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) Ignore environment variable setting ZSTD_CLEVEL=3a7: not a valid integer value tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) Ignore environment variable setting ZSTD_CLEVEL=50000000000: numeric value too large tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) test : override ZSTD_CLEVEL with command line option tmp : 56.58% ( 64.0 KiB => 36.2 KiB, tmp.zst) test : compress to stdout test : compress to named file tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmpCompressed) test : force write, correct order tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmpCompressed) test : forgotten argument error: missing command argument test : implied stdout when input is stdin bob test : null-length file roundtrip -n test : ensure small file doesn't add 3-bytes null block 14 14 test : decompress file with wrong suffix (must fail) zstd: tmpCompressed: unknown suffix (.zst/.tzst expected). Can't derive the output file name. Specify it with -o dstFileName. Ignoring. zstd: tmp: unknown suffix (.zst/.tzst expected). Can't derive the output file name. Specify it with -o dstFileName. Ignoring. test : decompress into stdout test : decompress from stdin into stdout test : impose memory limitation (must fail) tmplimit : 32.57% ( 500 KiB => 163 KiB, tmplimit.zst) tmplimit.zst : Decoding error (36) : Frame requires too much memory for decoding tmplimit.zst : Window size larger than maximum : 512000 > 2048 tmplimit.zst : Use --long=19 or --memory=1MB tmplimit.zst : Decoding error (36) : Frame requires too much memory for decoding tmplimit.zst : Window size larger than maximum : 512000 > 2048 tmplimit.zst : Use --long=19 or --memory=1MB tmplimit.zst : Decoding error (36) : Frame requires too much memory for decoding tmplimit.zst : Window size larger than maximum : 512000 > 2048 tmplimit.zst : Use --long=19 or --memory=1MB error: command cannot be separated from its argument by another command test : overwrite protection zstd: tmp.zst already exists; not overwritten test : force overwrite test : overwrite readonly file zstd: tmpro.zst already exists; not overwritten test: --no-progress flag /*stdin*\ : 4 bytes *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmpro :425.00% ( 4 B => 17 B, /*stdout*\) /*stdin*\ : 4 bytes test: --progress flag /*stdin*\ : 0 B... /*stdin*\ : 4 bytes /*stdin*\ : 0 B... /*stdin*\ : 4 bytes /*stdin*\ : 4 bytes test: overwrite input file (must fail) zstd: Refusing to open an output file which will overwrite the input file zstd: Refusing to open an output file which will overwrite the input file test: detect that input file does not exist zstd: can't stat nothere : No such file or directory -- ignored test: --[no-]compress-literals /*stdin*\ : 65537 bytes /*stdin*\ : 65537 bytes /*stdin*\ : 65537 bytes /*stdin*\ : 65537 bytes /*stdin*\ : 65537 bytes /*stdin*\ : 65537 bytes Loading tmp... |-tmp : 65537 -> |-tmp : 65537 -> 22185 (x2.954), 326.6 MB/s |-tmp : 65537 -> 22185 (x2.954), 326.6 MB/s, 1447.0 MB/s /-tmp : 65537 -> 22185 (x2.954), 326.6 MB/s, 1566.8 MB/s -1# Loading tmp... |-tmp : 65537 -> |-tmp : 65537 -> 21285 (x3.079), 5.04 MB/s |-tmp : 65537 -> 21285 (x3.079), 5.04 MB/s, 1445.4 MB/s /-tmp : 65537 -> 21285 (x3.079), 5.04 MB/s, 1500.8 MB/s 0# Loading tmp... |-tmp : 65537 -> |-tmp : 65537 -> 21510 (x3.047), 16.4 MB/s |-tmp : 65537 -> 21510 (x3.047), 16.4 MB/s, 1540.5 MB/s /-tmp : 65537 -> 21510 (x3.047), 16.4 MB/s, 1599.7 MB/s 1# Loading tmp... |-tmp : 65537 -> |-tmp : 65537 -> 36714 (x1.785), 405.8 MB/s |-tmp : 65537 -> 36714 (x1.785), 405.8 MB/s, 3906.8 MB/s /-tmp : 65537 -> 36714 (x1.785), 405.8 MB/s, 3906.8 MB/s -1# Loading tmp... |-tmp : 65537 -> |-tmp : 65537 -> 34502 (x1.900), 122.0 MB/s |-tmp : 65537 -> 34502 (x1.900), 122.0 MB/s, 3293.4 MB/s /-tmp : 65537 -> 34502 (x1.900), 187.3 MB/s /-tmp : 65537 -> 34502 (x1.900), 187.3 MB/s, 3293.4 MB/s 0# Loading tmp... |-tmp : 65537 -> |-tmp : 65537 -> 35605 (x1.841), 356.5 MB/s |-tmp : 65537 -> 35605 (x1.841), 356.5 MB/s, 4140.7 MB/s /-tmp : 65537 -> 35605 (x1.841), 356.5 MB/s, 4140.7 MB/s 1# test: --no-check for decompression tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp_corrupt.zst) tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) 4+0 records in 4+0 records out 4 bytes copied, 2.232e-05 s, 179 kB/s tmp_corrupt.zst : 65537 bytes tmp_corrupt.zst : 65537 bytes tmp.zst : 65537 bytes test: check if binary has executable stack (#2963) GNU_STACK 0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW 0x10 ===> --exclude-compressed flag 2 files compressed : 32.15% ( 128 KiB => 41.2 KiB) 4 files compressed : 32.15% ( 128 KiB => 41.2 KiB) Test is successful. input.5.zst is precompressed and therefore not compressed/modified again. 5 files compressed : 32.15% ( 64.0 KiB => 20.6 KiB) 5 files compressed : 100.07% ( 103 KiB => 103 KiB) Test completed ===> warning prompts should not occur if stdin is an input tmpPrompt :192.86% ( 14 B => 27 B, tmpPrompt.zst) zstd: tmpPrompt.zst already exists; stdin is an input - not proceeding. /*stdin*\ :192.86% ( 14 B => 27 B, tmpPrompt.zst) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** zstd: tmpPrompt.zst already exists; overwrite (y/n) ? tmpPrompt :192.86% ( 14 B => 27 B, tmpPrompt.zst) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** zstd: tmpPrompt.zst already exists; stdin is an input - not proceeding. zstd: WARNING: all input files will be processed and concatenated into a single output file: tmpPromp.zst The concatenated output CANNOT regenerate original file names nor directory structure. Since it's a destructive operation, input files will not be removed. stdin is an input - not proceeding. Test completed ===> recursive mode test please provide correct input file(s) or non-empty directories -- ignored ===> file removal tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) tmp.zst : 65537 bytes test: --rm is disabled when output is stdout test: --rm is disabled when multiple inputs are concatenated into a single output *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp3.zst The concatenated output CANNOT regenerate original file names nor directory structure. Since it's a destructive operation, input files will not be removed. Proceed? (y/n): tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp3.zst) tmp2 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp3.zst) 2 files compressed : 32.48% ( 128 KiB => 41.6 KiB) zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp3.zst The concatenated output CANNOT regenerate original file names nor directory structure. Since it's a destructive operation, input files will not be removed. 2 files compressed : 32.48% ( 128 KiB => 41.6 KiB) Concatenating multiple processed inputs into a single output loses file metadata. Aborting. test : should quietly not remove non-regular file test : --rm on stdin zstd: can't stat tmp : No such file or directory -- ignored test : -d -f do not delete destination when source is not present zstd: can't stat tmp.zst : No such file or directory -- ignored test : -f do not delete destination when source is not present zstd: can't stat tmp : No such file or directory -- ignored ===> decompression only tests 1+0 records in 1+0 records out 1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.000707867 s, 1.5 GB/s /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/golden-decompression/rle-first-block.zst: 1048576 bytes Files tmp1 and tmp are identical /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/golden-decompression/empty-block.zst: 0 bytes Files tmp2 and tmp_empty are identical ===> compress multiple files zstd: WARNING: all input files will be processed and concatenated into a single output file: /dev/null The concatenated output CANNOT regenerate original file names nor directory structure. 2 files compressed : 316.67% ( 12 B => 38 B) /*stdin*\ : 12 bytes *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp.zst The concatenated output CANNOT regenerate original file names nor directory structure. Proceed? (y/n): tmp1 :316.67% ( 6 B => 19 B, tmp.zst) tmp2 :316.67% ( 6 B => 19 B, tmp.zst) 2 files compressed : 316.67% ( 12 B => 38 B) 2 files compressed : 316.67% ( 12 B => 38 B) 2 files decompressed : 12 bytes total hello world zstd: WARNING: all input files will be processed and concatenated into a single output file: /dev/null The concatenated output CANNOT regenerate original file names nor directory structure. 2 files compressed : 168.42% ( 38 B => 64 B) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp The concatenated output CANNOT regenerate original file names nor directory structure. Proceed? (y/n): tmp1.zst : 6 bytes tmp2.zst : 6 bytes 2 files decompressed : 12 bytes total zstd: WARNING: all input files will be processed and concatenated into a single output file: tmpexists The concatenated output CANNOT regenerate original file names nor directory structure. 2 files compressed : 316.67% ( 12 B => 38 B) Concatenating multiple processed inputs into a single output loses file metadata. Aborting. *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** --zstd=wlog=10,clog=6,hlog=7,slog=2,mml=4,tlen=0,strat=2 --zstd=wlog=10,clog=6,hlog=7,slog=2,mml=4,tlen=0,strat=2 --format=.zst --no-sparse --block-size=0 --memory=134217728 --threads=1 --content-size zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp_rm3.zst The concatenated output CANNOT regenerate original file names nor directory structure. Proceed? (y/n): Decompression will require 7 B of memory tmp_rm1 :285.71% ( 7 B => 20 B, tmp_rm3.zst) tmp_rm1 : Completed in 0.00 sec (cpu load : 0%) Decompression will require 4 B of memory tmp_rm2 :425.00% ( 4 B => 17 B, tmp_rm3.zst) tmp_rm2 : Completed in 0.00 sec (cpu load : 0%) 2 files compressed : 336.36% ( 11 B => 37 B) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp_rm_out The concatenated output CANNOT regenerate original file names nor directory structure. Since it's a destructive operation, input files will not be removed. Proceed? (y/n): Sparse File Support is disabled when output is not a file tmp_rm3.zst : 11 bytes tmp_rm4.zst : 11 bytes 2 files decompressed : 22 bytes total ===> multiple files and shell completion compress tmp* : 15 files compressed : 35.62% ( 1.21 MiB => 442 KiB) decompress tmp* : 16 files decompressed : 1271279 bytes total compress tmp* into stdout > tmpall : decompress tmpall* into stdout > tmpdec : compress multiple files including a missing one (notHere) : zstd: can't stat notHere : No such file or directory -- ignored 2 files compressed : 32.50% ( 164 KiB => 53.3 KiB) ===> zstd fifo named pipe test tmp_named_pipe :200.00% ( 13 B => 26 B, tmp_compressed) tmp_compressed : 13 bytes Files tmp_original and tmp_decompressed are identical ===> zstd created file permissions tests test : copy 666 permissions in file -> file compression tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zst) test : copy 666 permissions in file -> file decompression tmp1.zst : 65537 bytes test : copy 400 permissions in file -> file compression (write to a read-only file) tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zst) test : copy 400 permissions in file -> file decompression (write to a read-only file) tmp1.zst : 65537 bytes test : check created permissions from stdin input in compression /*stdin*\ : 32.51% ( 64.0 KiB => 20.8 KiB, tmp1.zst) test : check created permissions from stdin input in decompression /*stdin*\ : 65537 bytes test : check created permissions from multiple inputs in compression zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp1.zst The concatenated output CANNOT regenerate original file names nor directory structure. 2 files compressed : 32.48% ( 128 KiB => 41.6 KiB) test : check created permissions from multiple inputs in decompression zstd: WARNING: all input files will be processed and concatenated into a single output file: tmp1.out The concatenated output CANNOT regenerate original file names nor directory structure. 2 files decompressed : 262148 bytes total test : check permissions on pre-existing output file in compression tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zst) test : check permissions on pre-existing output file in decompression tmp1.zst : 65537 bytes test : respect umask when compressing from stdin input /*stdin*\ : 32.51% ( 64.0 KiB => 20.8 KiB, tmp1.zst) test : respect umask when decompressing from stdin input /*stdin*\ : 65537 bytes ===> zstd created file timestamp tests test : copy mtime in file -> file compression tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) MTIME 946684800 946684800 test : copy mtime in file -> file decompression tmp.zst : 65537 bytes MTIME 946684800 946684800 ===> compress multiple files into an output directory, --output-dir-flat 2 files compressed : 336.36% ( 11 B => 37 B) test : decompress multiple files into an output directory, --output-dir-flat 2 files decompressed : 11 bytes total 2 files decompressed : 11 bytes total ===> compress multiple files into an output directory and mirror input folder, --output-dir-mirror 2 files compressed : 186.67% ( 30 B => 56 B) test: compress input dir will be ignored if it has '..' zstd: --output-dir-mirror cannot compress 'tmpInputTestDir/we/.../..must/../..mustgo/deeper..' into 'non-exist' zstd: --output-dir-mirror cannot compress 'tmpInputTestDir/we/.../..must/deeper../..' into 'non-exist' zstd: --output-dir-mirror cannot compress '../tests/tmpInputTestDir/we/.../..must/deeper..' into 'non-exist' test: compress input dir should succeed with benign uses of '..' tmpInputTestDir/we/.../..must/go/deeper../tmp2 :360.00% ( 5 B => 18 B, tmpout/tmpInputTestDir/we/.../..must/go/deeper../tmp2.zst) test : decompress multiple files into an output directory, --output-dir-mirror 2 files decompressed : 30 bytes total test: decompress input dir will be ignored if it has '..' zstd: --output-dir-mirror cannot compress 'tmpOutDir/tmpInputTestDir/we/.../..must/../..must/go/deeper../tmp2.zst' into 'non-exist' test : compress multiple files reading them from a file, --filelist=FILE 2 files compressed : 165.00% ( 40 B => 66 B) test : alternate syntax: --filelist FILE 2 files compressed : 165.00% ( 40 B => 66 B) test : reading file list from a symlink, --filelist=FILE 2 files compressed : 165.00% ( 40 B => 66 B) test : compress multiple files reading them from multiple files, --filelist=FILE 4 files compressed : 165.00% ( 80 B => 132 B) test : decompress multiple files reading them from a file, --filelist=FILE 2 files decompressed : 40 bytes total test : decompress multiple files reading them from multiple files, --filelist=FILE 4 files decompressed : 80 bytes total test : survive the list of files with too long filenames (--filelist=FILE) test : survive a list of files which is text garbage (--filelist=FILE) test : survive a list of files which is binary garbage (--filelist=FILE) test : try to overflow internal list of files (--filelist=FILE) 35 files compressed : 100.02% ( 2.00 MiB => 2.00 MiB) ===> --[no-]content-size tests tmp_contentsize : 32.48% ( 64.0 KiB => 20.8 KiB, tmp_contentsize.zst) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Decompressed Size: 64.0 KiB (65537 B) tmp_contentsize : 32.48% ( 64.0 KiB => 20.8 KiB, tmp_contentsize.zst) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmp_contentsize : 32.48% ( 64.0 KiB => 20.8 KiB, tmp_contentsize.zst) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Decompressed Size: 64.0 KiB (65537 B) tmp_contentsize : 32.48% ( 64.0 KiB => 20.8 KiB, tmp_contentsize.zst) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** test : show-default-cparams regular tmp (65537 bytes) - windowLog : 17 - chainLog : 15 - hashLog : 16 - searchLog : 2 - minMatch : 5 - targetLength : 0 - strategy : ZSTD_dfast (2) tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) error : can't use --show-default-cparams in decompression mode test : show-default-cparams recursive tmp_files/tmp3 (257000 bytes) - windowLog : 18 - chainLog : 16 - hashLog : 16 - searchLog : 1 - minMatch : 4 - targetLength : 0 - strategy : ZSTD_dfast (2) tmp_files/tmp2 (129000 bytes) - windowLog : 17 - chainLog : 15 - hashLog : 16 - searchLog : 2 - minMatch : 5 - targetLength : 0 - strategy : ZSTD_dfast (2) tmp_files/tmp1 (15000 bytes) - windowLog : 14 - chainLog : 14 - hashLog : 15 - searchLog : 2 - minMatch : 4 - targetLength : 0 - strategy : ZSTD_dfast (2) 3 files compressed : 34.11% ( 392 KiB => 134 KiB) test : show compression parameters in verbose mode ===> Advanced compression parameters Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. zstd: error 11 : Parameter is out of bound roundTripTest: datagen -g512K | zstd -v | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.61% ( 512 KiB => 167 KiB, /*stdout*\) roundTripTest: datagen -g512K | zstd -v --zstd=mml=3,tlen=48,strat=6 | zstd -d --zstd=mml=3,tlen=48,strat=6 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 34.55% ( 512 KiB => 177 KiB, /*stdout*\) roundTripTest: datagen -g512K | zstd -v --zstd=strat=6,wlog=23,clog=23,hlog=22,slog=6 | zstd -d --zstd=strat=6,wlog=23,clog=23,hlog=22,slog=6 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.42% ( 512 KiB => 166 KiB, /*stdout*\) roundTripTest: datagen -g512K | zstd -v --zstd=windowLog=23,chainLog=23,hashLog=22,searchLog=6,minMatch=3,targetLength=48,strategy=6 | zstd -d --zstd=windowLog=23,chainLog=23,hashLog=22,searchLog=6,minMatch=3,targetLength=48,strategy=6 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 34.46% ( 512 KiB => 176 KiB, /*stdout*\) roundTripTest: datagen -g512K | zstd -v --single-thread --long --zstd=ldmHashLog=20,ldmMinMatch=64,ldmBucketSizeLog=1,ldmHashRateLog=7 | zstd -d --single-thread --long --zstd=ldmHashLog=20,ldmMinMatch=64,ldmBucketSizeLog=1,ldmHashRateLog=7 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.35% ( 512 KiB => 166 KiB, /*stdout*\) roundTripTest: datagen -g512K | zstd -v --single-thread --long --zstd=lhlog=20,lmml=64,lblog=1,lhrlog=7 | zstd -d --single-thread --long --zstd=lhlog=20,lmml=64,lblog=1,lhrlog=7 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.35% ( 512 KiB => 166 KiB, /*stdout*\) roundTripTest: datagen -g64K | zstd -v19 --zstd=strat=9 | zstd -d19 --zstd=strat=9 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.53% ( 64.0 KiB => 20.2 KiB, /*stdout*\) ===> Pass-Through mode Hello world 1! Hello world 2! Hello world 3! ===> frame concatenation hello world! frame concatenation without checksum testing zstdcat symlink testing zcat symlink frame concatenation tests completed **** flush write error test **** println foo | zstd > /dev/full zstd: /*stdout*\: No space left on device println foo | zstd | zstd -d > /dev/full zstd: /*stdout*\: No space left on device ===> symbolic link test Warning : world.tmp is a symbolic link, ignoring hello.tmp :208.33% ( 12 B => 25 B, hello.tmp.zst) Warning : world.tmp is a symbolic link, ignoring Warning : world.tmp is a symbolic link, ignoring Warning : world2.tmp is a symbolic link, ignoring 2 files compressed : 208.33% ( 24 B => 50 B) ===> test sparse file support *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 5242880 bytes Files tmpSparse and tmpSparseRegen are identical *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 5242880 bytes Files tmpSparse and tmpOutSparse are identical *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 5242880 bytes Files tmpSparse and tmpOutNoSparse are identical 5120 -rw-r--r-- 1 builder builder 5242880 Jul 28 01:43 tmpSparse 5120 -rw-r--r-- 1 builder builder 5242880 Jul 28 01:43 tmpSparseRegen *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 1200007 bytes Files - and tmpSparseOdd are identical 44 -rw-r--r-- 1 builder builder 1200007 Jul 28 01:43 tmpSparseOdd Sparse Compatibility with Console : Hello World 1 ! Hello World 2 ! Sparse Compatibility with Append : *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmpSparse1M : 0.01% ( 1.000 MiB => 67 B, tmpSparseCompressed) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmpSparseCompressed : 1048576 bytes *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmpSparseCompressed : 1048576 bytes 5120 -rw-r--r-- 1 builder builder 5242880 Jul 28 01:43 tmpSparse 1024 -rw-r--r-- 1 builder builder 1048576 Jul 28 01:43 tmpSparse1M 2048 -rw-r--r-- 1 builder builder 2097152 Jul 28 01:43 tmpSparse2M 4 -rw-r--r-- 1 builder builder 67 Jul 28 01:43 tmpSparseCompressed 44 -rw-r--r-- 1 builder builder 1200007 Jul 28 01:43 tmpSparseOdd 5120 -rw-r--r-- 1 builder builder 5242880 Jul 28 01:43 tmpSparseRegen 2048 -rw-r--r-- 1 builder builder 2097152 Jul 28 01:43 tmpSparseRegenerated ===> stream-size mode test : basic file compression vs sized streaming compression tmp : 21.87% ( 10.7 KiB => 2.35 KiB, tmp.zst) test : sized streaming compression and decompression tmp : 21.87% ( 10.7 KiB => 2.35 KiB, tmp.zst) tmp.zst : 11000 bytes test : incorrect stream size zstd: error 11 : Src size is incorrect ===> zstd zero weight dict test tmp_input :103.27% ( 153 B => 158 B, tmp_input.zst) tmp_input.zst : 153 bytes ===> zstd (valid) zero weight dict test tmp_input : 96.15% ( 26 B => 25 B, tmp_input.zst) tmp_input.zst : 26 bytes ===> size-hint mode test : basic file compression vs hinted streaming compression tmp : 21.87% ( 10.7 KiB => 2.35 KiB, tmp.zst) test : hinted streaming compression and decompression /*stdin*\ : 21.86% ( 10.7 KiB => 2.35 KiB, tmp.zst) tmp.zst : 11000 bytes test : hinted streaming compression with dictionary /*stdin*\ : 11000 bytes test : multiple file compression with hints and dictionary 2 files compressed : 0.33% ( 21.5 KiB => 72 B) tmp : 0.33% ( 10.7 KiB => 36 B, tmp1_.zst) tmp2 : 0.33% ( 10.7 KiB => 36 B, tmp2_.zst) test : incorrect hinted stream sizes /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes test : allows and interprets K,KB,KiB,M,MB and MiB suffix /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes /*stdin*\ : 11000 bytes ===> dictionary tests - Test high/low compressibility corpus training Loading tmpCorpusHighCompress... Trying 5 different sets of parameters 20% 40% 60% 80% 100% k=1998 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file tmpDictHighCompress Loading tmpCorpusLowCompress... Trying 5 different sets of parameters 20% 40% 60% 80% 100% k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file tmpDictLowCompress - Test with raw dict (content only) - Create first dictionary ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 5 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file tmpDict - Test dictionary compression with tmpDict as an input file and dictionary zstd: cannot use tmpDict as an input file and dictionary - Dictionary compression roundtrip tmp : 16.25% ( 74.9 KiB => 12.2 KiB, tmp.zst) tmp.zst : 76704 bytes - Dictionary compression with hlog < clog tmp : 14.37% ( 74.9 KiB => 10.8 KiB, tmp.zst) - Dictionary compression with btlazy2 strategy tmp : 14.54% ( 74.9 KiB => 10.9 KiB, tmp.zst) tmp.zst : 76704 bytes - Test dictionary compression with multithreading /*stdin*\ : 5242880 bytes - Create second (different) dictionary Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/paramgrill.c... Trying 5 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 547282! size(source)/size(dictionary) = 4.858683, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file tmpDictC tmp.zst : Decoding error (36) : Dictionary mismatch - Create dictionary with short dictID ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 5 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file tmpDict1 tmpDict tmpDict1 differ: char 5, line 1 - Create dictionary with wrong dictID parameter order (must fail) error: command cannot be separated from its argument by another command - Create dictionary with size limit *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Shuffling input files Sample file '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/zstreamtest.c' is too large, limiting to 128 KBSample file '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/fuzzer.c' is too large, limiting to 128 KBSample file '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/fileio.c' is too large, limiting to 128 KBLoading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 5 different sets of parameters d=8 Training on 18 samples of total size 569629 Testing on 7 samples of total size 319654 Computing frequencies k=50 Breaking content into 81 epochs of size 7032 statistics ... k=537 Breaking content into 7 epochs of size 81374 statistics ... k=1024 Breaking content into 4 epochs of size 142405 statistics ... k=1511 Breaking content into 2 epochs of size 284811 statistics ... k=1998 Breaking content into 2 epochs of size 284811 statistics ... k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 4096 into file tmpDict2 - Create dictionary with small size limit *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Shuffling input files Sample file '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/zstreamtest.c' is too large, limiting to 128 KBSample file '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/fuzzer.c' is too large, limiting to 128 KBSample file '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/fileio.c' is too large, limiting to 128 KBLoading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 5 different sets of parameters d=8 Training on 18 samples of total size 569629 Testing on 7 samples of total size 319654 Computing frequencies k=50 Breaking content into 20 epochs of size 28481 statistics ... k=537 Breaking content into 1 epochs of size 569622 statistics ... k=1024 Breaking content into 1 epochs of size 569622 statistics ... k=1511 FASTCOVER parameters incorrect k=1998 FASTCOVER parameters incorrect k=50 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 1024 into file tmpDict3 - Create dictionary with wrong parameter order (must fail) error: command cannot be separated from its argument by another command - Compress without dictID tmp : 16.24% ( 74.9 KiB => 12.2 KiB, tmp.zst) tmp.zst : 76704 bytes - Compress multiple files with dictionary 37 files compressed : 18.43% ( 1.04 MiB => 196 KiB) 37 files decompressed : 1087374 bytes total dirTestDict/benchfn.c: OK dirTestDict/benchfn.h: OK dirTestDict/benchzstd.c: OK dirTestDict/benchzstd.h: OK dirTestDict/bigdict.c: OK dirTestDict/checkTag.c: OK dirTestDict/datagen.c: OK dirTestDict/datagen.h: OK dirTestDict/datagencli.c: OK dirTestDict/decodecorpus.c: OK dirTestDict/dibio.c: OK dirTestDict/dibio.h: OK dirTestDict/external_matchfinder.c: OK dirTestDict/fileio.c: OK dirTestDict/fileio.h: OK dirTestDict/fileio_asyncio.c: OK dirTestDict/fileio_asyncio.h: OK dirTestDict/fileio_common.h: OK dirTestDict/fileio_types.h: OK dirTestDict/fullbench.c: OK dirTestDict/fuzzer.c: OK dirTestDict/invalidDictionaries.c: OK dirTestDict/legacy.c: OK dirTestDict/longmatch.c: OK dirTestDict/paramgrill.c: OK dirTestDict/platform.h: OK dirTestDict/poolTests.c: OK dirTestDict/roundTripCrash.c: OK dirTestDict/seqgen.c: OK dirTestDict/timefn.c: OK dirTestDict/timefn.h: OK dirTestDict/util.c: OK dirTestDict/util.h: OK dirTestDict/zstdcli.c: OK dirTestDict/zstdcli_trace.c: OK dirTestDict/zstdcli_trace.h: OK dirTestDict/zstreamtest.c: OK - dictionary builder on bogus input Error 14 : nb of samples too low Error 14 : nb of samples too low - Test -o before --train ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 5 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file tmpDict ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 5 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file dictionary - Create dictionary with multithreading enabled ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 5 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=537 d=8 f=20 steps=4 split=75 accel=1 Save dictionary of size 112640 into file tmpDict - Test --memory for dictionary compression ! Warning : setting manual memory limit for dictionary training data at 0 MB Training samples set too large (12 MB); training on 0 MB only... Loading tmpCorpusHighCompress... Trying 5 different sets of parameters Total number of training samples is 3 and is invalid Failed to initialize context dictionary training failed : Src size is incorrect ! Warning : setting manual memory limit for dictionary training data at 5 MB Training samples set too large (12 MB); training on 5 MB only... ===> fastCover dictionary builder : advanced options - Create first dictionary ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1933 epochs of size 460 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file tmpDict tmp : 19.07% ( 74.9 KiB => 14.3 KiB, tmp.zst) tmp.zst : 76704 bytes - Create second (different) dictionary Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/paramgrill.c... Training on 37 samples of total size 955576 Testing on 37 samples of total size 955576 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 955569! size(source)/size(dictionary) = 8.483390, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1706 epochs of size 560 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file tmpDictC tmp.zst : Decoding error (36) : Dictionary mismatch ! Warning : nb of samples too low for proper processing ! ! Please provide _one file per sample_. ! Alternatively, split files into fixed-size blocks representative of samples, with -B# Error 14 : nb of samples too low - Create dictionary with short dictID ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1933 epochs of size 460 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file tmpDict1 tmpDict tmpDict1 differ: char 5, line 1 - Create dictionaries with shrink-dict flag enabled ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 4 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=2000 d=6 f=20 steps=1 split=75 accel=1 Save dictionary of size 112640 into file tmpShrinkDict ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 4 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=2000 d=6 f=20 steps=1 split=75 accel=1 Save dictionary of size 112640 into file tmpShrinkDict1 ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 4 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=2000 d=6 f=20 steps=1 split=75 accel=1 Save dictionary of size 112640 into file tmpShrinkDict2 ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 4 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! k=2000 d=6 f=20 steps=1 split=75 accel=1 Save dictionary of size 112640 into file tmpShrinkDict3 - Create dictionary with size limit Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 4 different sets of parameters k=50 d=8 f=20 steps=1 split=75 accel=1 Save dictionary of size 4096 into file tmpDict2 - Create dictionary using all samples for both training and testing ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1587 epochs of size 560 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file dictionary - Create dictionary using f=16 ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1587 epochs of size 560 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file dictionary ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... FASTCOVER parameters incorrect dictionary training failed : Parameter is out of bound - Create dictionary using accel=2 ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1587 epochs of size 560 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file dictionary - Create dictionary using accel=10 ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1587 epochs of size 560 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file dictionary - Create dictionary with multithreading ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 82 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 569622! size(source)/size(dictionary) = 5.057013, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 12% 19% 28% 37% 47% 57% 64% 74% 81% 90% 100% k=386 d=8 f=20 steps=40 split=75 accel=1 Save dictionary of size 112640 into file dictionary - Test -o before --train-fastcover ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1587 epochs of size 560 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file tmpDict ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 1587 epochs of size 560 statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file dictionary ===> legacy dictionary builder - Create first dictionary ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... sorting 25 files of total size 0 MB ... finding patterns ... statistics ... Save dictionary of size 60120 into file tmpDict tmp : 20.15% ( 74.9 KiB => 15.1 KiB, tmp.zst) tmp.zst : 76704 bytes ! Warning : nb of samples too low for proper processing ! ! Please provide _one file per sample_. ! Alternatively, split files into fixed-size blocks representative of samples, with -B# Error 14 : nb of samples too low - Create second (different) dictionary Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/paramgrill.c... sorting 37 files of total size 0 MB ... finding patterns ... 95.95 % statistics ... Save dictionary of size 65387 into file tmpDictC tmp.zst : Decoding error (36) : Dictionary mismatch - Create dictionary with short dictID ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... sorting 25 files of total size 0 MB ... finding patterns ... statistics ... Save dictionary of size 60120 into file tmpDict1 tmpDict tmpDict1 differ: char 5, line 1 - Create dictionary with size limit Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... sorting 25 files of total size 0 MB ... finding patterns ... ! note : calculated dictionary significantly larger than requested (59967 > 4096) ! consider increasing dictionary size, or produce denser dictionary (-s2) ! always test dictionary efficiency on real samples statistics ... Save dictionary of size 4096 into file tmpDict2 - Test -o before --train-legacy ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... sorting 25 files of total size 0 MB ... finding patterns ... statistics ... Save dictionary of size 60120 into file tmpDict ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... sorting 25 files of total size 0 MB ... finding patterns ... statistics ... Save dictionary of size 60120 into file dictionary ===> integrity tests test one file (tmp1.zst) tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zst) tmp1.zst : 65537 bytes tmp1.zst : 65537 bytes test multiple files (*.zst) Warning : ./helloworld.link.zst is a symbolic link, ignoring 4 files decompressed : 65565 bytes total test bad files (*) Warning : ./helloworld.link.zst is a symbolic link, ignoring zstd: ./DEPRECATED-test-zstd-speed.py: unsupported format zstd: ./Makefile: unsupported format zstd: ./README.md: unsupported format zstd: ./automated_benchmarking.py: unsupported format zstd: ./bigdict.c: unsupported format zstd: ./checkTag.c: unsupported format zstd: ./check_size.py: unsupported format zstd: ./cli-tests is a directory -- ignored zstd: ./datagen: unsupported format zstd: ./datagencli.c: unsupported format zstd: ./decodecorpus: unsupported format zstd: ./decodecorpus.c: unsupported format zstd: ./dict-files is a directory -- ignored zstd: ./external_matchfinder.c: unsupported format zstd: ./external_matchfinder.h: unsupported format zstd: ./fullbench: unexpected end of file zstd: ./fullbench.c: unsupported format zstd: ./fuzz is a directory -- ignored zstd: ./fuzzer: unexpected end of file zstd: ./fuzzer.c: unsupported format zstd: ./golden-compression is a directory -- ignored zstd: ./golden-decompression is a directory -- ignored zstd: ./golden-dictionaries is a directory -- ignored zstd: ./gzip is a directory -- ignored zstd: ./invalidDictionaries: unsupported format zstd: ./invalidDictionaries.c: unsupported format zstd: ./legacy: unsupported format zstd: ./legacy.c: unsupported format zstd: ./libzstd_builds.sh: unsupported format zstd: ./longmatch.c: unsupported format zstd: ./paramgrill.c: unsupported format zstd: ./playTests.sh: unsupported format zstd: ./poolTests: unsupported format zstd: ./poolTests.c: unsupported format zstd: ./rateLimiter.py: unsupported format zstd: ./regression is a directory -- ignored zstd: ./roundTripCrash.c: unsupported format zstd: ./seqgen.c: unsupported format zstd: ./seqgen.h: unsupported format zstd: ./test-license.py: unsupported format zstd: ./test-variants.sh: unsupported format zstd: ./test-zstd-versions.py: unsupported format zstd: ./tmp1: unsupported format zstd: ./zstdc_fse_compress.o: unsupported format zstd: ./zstdc_hist.o: unsupported format zstd: ./zstdc_huf_compress.o: unsupported format zstd: ./zstdc_zstd_compress.o: unsupported format zstd: ./zstdc_zstd_compress_literals.o: unsupported format zstd: ./zstdc_zstd_compress_sequences.o: unsupported format zstd: ./zstdc_zstd_compress_superblock.o: unsupported format zstd: ./zstdc_zstd_double_fast.o: unsupported format zstd: ./zstdc_zstd_fast.o: unsupported format zstd: ./zstdc_zstd_lazy.o: unsupported format zstd: ./zstdc_zstd_ldm.o: unsupported format zstd: ./zstdc_zstd_opt.o: unsupported format zstd: ./zstdc_zstdmt_compress.o: unsupported format zstd: ./zstdd_huf_decompress.o: unsupported format zstd: ./zstdd_huf_decompress_amd64.o: unsupported format zstd: ./zstdd_zstd_ddict.o: unsupported format zstd: ./zstdd_zstd_decompress.o: unsupported format zstd: ./zstdd_zstd_decompress_block.o: unsupported format zstd: ./zstdm_debug.o: unsupported format zstd: ./zstdm_entropy_common.o: unsupported format zstd: ./zstdm_error_private.o: unsupported format zstd: ./zstdm_fse_decompress.o: unsupported format zstd: ./zstdm_pool.o: unsupported format zstd: ./zstdm_threading.o: unsupported format zstd: ./zstdm_xxhash.o: unsupported format zstd: ./zstdm_zstd_common.o: unsupported format zstd: ./zstdmt_c_fse_compress.o: unsupported format zstd: ./zstdmt_c_hist.o: unsupported format zstd: ./zstdmt_c_huf_compress.o: unsupported format zstd: ./zstdmt_c_zstd_compress.o: unsupported format zstd: ./zstdmt_c_zstd_compress_literals.o: unsupported format zstd: ./zstdmt_c_zstd_compress_sequences.o: unsupported format zstd: ./zstdmt_c_zstd_compress_superblock.o: unsupported format zstd: ./zstdmt_c_zstd_double_fast.o: unsupported format zstd: ./zstdmt_c_zstd_fast.o: unsupported format zstd: ./zstdmt_c_zstd_lazy.o: unsupported format zstd: ./zstdmt_c_zstd_ldm.o: unsupported format zstd: ./zstdmt_c_zstd_opt.o: unsupported format zstd: ./zstdmt_c_zstdmt_compress.o: unsupported format zstd: ./zstdmt_d_huf_decompress.o: unsupported format zstd: ./zstdmt_d_huf_decompress_amd64.o: unsupported format zstd: ./zstdmt_d_zstd_ddict.o: unsupported format zstd: ./zstdmt_d_zstd_decompress.o: unsupported format zstd: ./zstdmt_d_zstd_decompress_block.o: unsupported format zstd: ./zstdmt_m_debug.o: unsupported format zstd: ./zstdmt_m_entropy_common.o: unsupported format zstd: ./zstdmt_m_error_private.o: unsupported format zstd: ./zstdmt_m_fse_decompress.o: unsupported format zstd: ./zstdmt_m_pool.o: unsupported format zstd: ./zstdmt_m_threading.o: unsupported format zstd: ./zstdmt_m_xxhash.o: unsupported format zstd: ./zstdmt_m_zstd_common.o: unsupported format zstd: ./zstreamtest: unexpected end of file zstd: ./zstreamtest.c: unsupported format 4 files decompressed : 65565 bytes total zstd: tmp1: unsupported format zstd: tmp2.zst: unsupported format zstd: tmp3: unexpected end of file test --rm and --test combined tmp1.zst : 65537 bytes 2 files decompressed : 131074 bytes total tmpSplit.aa : Read error (39) : premature end zstd: tmpSplit.ab: unsupported format /*stdin*\ : 65537 bytes ===> golden files tests 2 files decompressed : 1048576 bytes total /*stdin*\ : 463474 bytes /*stdin*\ : 1189 bytes ===> benchmark mode tests bench one file Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21285 (x3.079), 114.7 MB/s |-tmp1 : 65537 -> 21285 (x3.079), 114.7 MB/s, 1434.4 MB/s /-tmp1 : 65537 -> 21285 (x3.079), 169.7 MB/s /-tmp1 : 65537 -> 21285 (x3.079), 169.7 MB/s, 1492.2 MB/s 3# bench multiple levels Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21285 (x3.079), 113.9 MB/s |-tmp1 : 65537 -> 21285 (x3.079), 113.9 MB/s, 1422.9 MB/s /-tmp1 : 65537 -> 21285 (x3.079), 167.6 MB/s /-tmp1 : 65537 -> 21285 (x3.079), 167.6 MB/s, 1499.6 MB/s 0# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21510 (x3.047), 287.8 MB/s |-tmp1 : 65537 -> 21510 (x3.047), 287.8 MB/s, 1535.9 MB/s /-tmp1 : 65537 -> 21510 (x3.047), 287.8 MB/s, 1603.5 MB/s 1# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21406 (x3.062), 19.9 MB/s |-tmp1 : 65537 -> 21406 (x3.062), 19.9 MB/s, 1424.0 MB/s /-tmp1 : 65537 -> 21406 (x3.062), 19.9 MB/s, 1475.2 MB/s 2# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21285 (x3.079), 130.4 MB/s |-tmp1 : 65537 -> 21285 (x3.079), 130.4 MB/s, 80.3 MB/s /-tmp1 : 65537 -> 21285 (x3.079), 145.8 MB/s 3# bench negative level Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 36714 (x1.785), 411.0 MB/s |-tmp1 : 65537 -> 36714 (x1.785), 411.0 MB/s, 3969.8 MB/s /-tmp1 : 65537 -> 36714 (x1.785), 411.0 MB/s, 4165.3 MB/s -1# with recursive and quiet modes bench 1.5.5 : input 65537 bytes, 0 seconds, 0 KB blocks -1 21510 (3.047) 291.70 MB/s 1594.7 MB/s tmp1 bench 1.5.5 : input 65537 bytes, 0 seconds, 0 KB blocks -2 21406 (3.062) 232.70 MB/s 171.2 MB/s tmp1 benchmark decompression only tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zst) Loading tmp1.zst... |-tmp1.zst : 65537 -> |-tmp1.zst : 65537 -> 21289 (x3.078), 0.00 MB/s, 1199.5 MB/s /-tmp1.zst : 65537 -> 21289 (x3.078), 0.00 MB/s, 1220.2 MB/s 3# benchmark can fail - decompression on invalid data Loading tmp1... Error 32 : Error while trying to assess decompressed size: data may be invalid Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. ===> zstd compatibility tests tmp : 32.48% ( 64.0 KiB => 20.8 KiB, tmp.zst) ===> gzip compatibility tests Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. gzip mode not supported ===> gzip frame tests gzip mode not supported ===> xz compatibility tests Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. xz mode not supported ===> xz frame tests xz mode not supported ===> lz4 compatibility tests Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. lz4 mode not supported lz4 mode not supported ===> suffix list test tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zstd) tmp1.zstd : 65537 bytes ===> tar extension tests tmp.tar : 29.84% ( 70.0 KiB => 20.9 KiB, tmp.tzst) tmp.tzst : 71680 bytes zstd: tmp.t: unknown suffix (.zst/.tzst expected). Can't derive the output file name. Specify it with -o dstFileName. Ignoring. zstd: tmp.tz: unknown suffix (.zst/.tzst expected). Can't derive the output file name. Specify it with -o dstFileName. Ignoring. zstd: tmp.tzs: unknown suffix (.zst/.tzst expected). Can't derive the output file name. Specify it with -o dstFileName. Ignoring. ===> zstd round-trip tests roundTripTest: datagen | zstd -v | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.51% ( 64.0 KiB => 20.8 KiB, /*stdout*\) roundTripTest: datagen -g15K | zstd -v | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 25.88% ( 15.0 KiB => 3.88 KiB, /*stdout*\) roundTripTest: datagen -g127K | zstd -v | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.07% ( 127 KiB => 40.7 KiB, /*stdout*\) roundTripTest: datagen -g255K | zstd -v | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.89% ( 255 KiB => 83.9 KiB, /*stdout*\) roundTripTest: datagen -g522K | zstd -v | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.58% ( 522 KiB => 170 KiB, /*stdout*\) roundTripTest: datagen -g519K | zstd -v6 | zstd -d6 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.58% ( 519 KiB => 169 KiB, /*stdout*\) roundTripTest: datagen -g517K | zstd -v16 | zstd -d16 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.27% ( 517 KiB => 162 KiB, /*stdout*\) roundTripTest: datagen -g516K | zstd -v19 | zstd -d19 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.69% ( 516 KiB => 164 KiB, /*stdout*\) fileRoundTripTest: datagen -g500K > tmp && zstd -v -c tmp | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmp : 32.57% ( 500 KiB => 163 KiB, /*stdout*\) ===> zstd long distance matching round-trip tests roundTripTest: datagen -g0 | zstd -v2 --single-thread --long | zstd -d2 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : ( 0 B => 13 B, /*stdout*\) roundTripTest: datagen -g1000K | zstd -v1 --single-thread --long | zstd -d1 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.22% ( 1000 KiB => 312 KiB, /*stdout*\) roundTripTest: datagen -g517K | zstd -v6 --single-thread --long | zstd -d6 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.70% ( 517 KiB => 169 KiB, /*stdout*\) roundTripTest: datagen -g516K | zstd -v16 --single-thread --long | zstd -d16 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.22% ( 516 KiB => 161 KiB, /*stdout*\) roundTripTest: datagen -g518K | zstd -v19 --single-thread --long | zstd -d19 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.73% ( 518 KiB => 164 KiB, /*stdout*\) roundTripTest: datagen -g2M | zstd -v22 --single-thread --ultra --long | zstd -d22 --single-thread --ultra --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.22% ( 2.00 MiB => 639 KiB, /*stdout*\) fileRoundTripTest: datagen -g5M > tmp && zstd -v3 --single-thread --long -c tmp | zstd -d3 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmp : 31.98% ( 5.00 MiB => 1.60 MiB, /*stdout*\) roundTripTest: datagen -g96K | zstd -v5 --single-thread | zstd -d5 --single-thread *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.16% ( 96.0 KiB => 29.9 KiB, /*stdout*\) ===> zstdmt round-trip tests roundTripTest: datagen -g4M | zstd -v1 -T0 | zstd -d1 -T0 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Note: 8 physical core(s) detected /*stdin*\ : 31.34% ( 4.00 MiB => 1.25 MiB, /*stdout*\) roundTripTest: datagen -g4M | zstd -v1 -T0 --auto-threads=physical | zstd -d1 -T0 --auto-threads=physical *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Note: 8 physical core(s) detected /*stdin*\ : 31.34% ( 4.00 MiB => 1.25 MiB, /*stdout*\) roundTripTest: datagen -g4M | zstd -v1 -T0 --auto-threads=logical | zstd -d1 -T0 --auto-threads=logical *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Note: 8 logical core(s) detected /*stdin*\ : 31.34% ( 4.00 MiB => 1.25 MiB, /*stdout*\) roundTripTest: datagen -g8M | zstd -v3 -T2 | zstd -d3 -T2 Warning : decompression does not support multi-threading *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.25% ( 8.00 MiB => 2.58 MiB, /*stdout*\) roundTripTest: datagen -g8M | zstd -v19 --long | zstd -d19 --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.32% ( 8.00 MiB => 2.51 MiB, /*stdout*\) roundTripTest: datagen -g8000K | zstd -v2 --threads=2 | zstd -d2 --threads=2 Warning : decompression does not support multi-threading *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.22% ( 7.81 MiB => 2.44 MiB, /*stdout*\) fileRoundTripTest: datagen -g4M > tmp && zstd -v19 -T2 -B1M -c tmp | zstd -d19 -T2 -B1M *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Warning : decompression does not support multi-threading tmp : 31.15% ( 4.00 MiB => 1.25 MiB, /*stdout*\) ===> zstdmt long distance matching round-trip tests roundTripTest: datagen -g8M | zstd -v3 --long=24 -T2 | zstd -d3 --long=24 -T2 Warning : decompression does not support multi-threading *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.93% ( 8.00 MiB => 2.55 MiB, /*stdout*\) ===> zstdmt environment variable tests Ignore environment variable setting ZSTD_NBTHREADS=-3: not a valid unsigned value mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) Ignore environment variable setting ZSTD_NBTHREADS=: not a valid unsigned value mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) Ignore environment variable setting ZSTD_NBTHREADS=-: not a valid unsigned value mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) Ignore environment variable setting ZSTD_NBTHREADS=a: not a valid unsigned value mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) Ignore environment variable setting ZSTD_NBTHREADS=+a: not a valid unsigned value mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) Ignore environment variable setting ZSTD_NBTHREADS=3a7: not a valid unsigned value mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) Ignore environment variable setting ZSTD_NBTHREADS=50000000000: numeric value too large mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) mt_tmp :244.44% ( 9 B => 22 B, mt_tmp.zst) ===> ovLog tests ===> zstd --list/-l single frame tests 3 files compressed : 32.48% ( 192 KiB => 62.4 KiB) Warning : ./helloworld.link.zst is a symbolic link, ignoring Frames Skips Compressed Uncompressed Ratio Check Filename 1 0 16 B 7 B 0.438 None ./hello.zst 2 0 40 B 14 B 0.350 XXH64 ./helloworld.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp1.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp2.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp3.zst 1 0 16 B 7 B 0.438 None ./world.zst ----------------------------------------------------------------- 7 0 62.4 KiB 192 KiB 3.075 6 files *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Warning : ./helloworld.link.zst is a symbolic link, ignoring Decompressed Size: 7 B (7 B) Decompressed Size: 14 B (14 B) Decompressed Size: 64.0 KiB (65537 B) Decompressed Size: 64.0 KiB (65537 B) Decompressed Size: 64.0 KiB (65537 B) Decompressed Size: 7 B (7 B) Warning : ./helloworld.link.zst is a symbolic link, ignoring Frames Skips Compressed Uncompressed Ratio Check Filename 1 0 16 B 7 B 0.438 None ./hello.zst 2 0 40 B 14 B 0.350 XXH64 ./helloworld.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp1.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp2.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp3.zst 1 0 16 B 7 B 0.438 None ./world.zst ----------------------------------------------------------------- 7 0 62.4 KiB 192 KiB 3.075 6 files *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Warning : ./helloworld.link.zst is a symbolic link, ignoring ./hello.zst # Zstandard Frames: 1 DictID: 0 Window Size: 7 B (7 B) Compressed Size: 16 B (16 B) Decompressed Size: 7 B (7 B) Ratio: 0.4375 Check: None ./helloworld.zst # Zstandard Frames: 2 DictID: 0 Window Size: 7 B (7 B) Compressed Size: 40 B (40 B) Decompressed Size: 14 B (14 B) Ratio: 0.3500 Check: XXH64 ./tmp1.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21289 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0784 Check: XXH64 f53ad43d ./tmp2.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21289 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0784 Check: XXH64 f53ad43d ./tmp3.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21289 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0784 Check: XXH64 f53ad43d ./world.zst # Zstandard Frames: 1 DictID: 0 Window Size: 7 B (7 B) Compressed Size: 16 B (16 B) Decompressed Size: 7 B (7 B) Ratio: 0.4375 Check: None ===> zstd --list/-l multiple frame tests Warning : ./helloworld.link.zst is a symbolic link, ignoring Frames Skips Compressed Uncompressed Ratio Check Filename 1 0 16 B 7 B 0.438 None ./hello.zst 2 0 40 B 14 B 0.350 XXH64 ./helloworld.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp1.zst 2 0 41.6 KiB 128 KiB 3.078 XXH64 ./tmp12.zst 3 0 62.4 KiB 192 KiB 3.078 XXH64 ./tmp123.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp2.zst 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 ./tmp3.zst 1 0 16 B 7 B 0.438 None ./world.zst ----------------------------------------------------------------- 12 0 166 KiB 512 KiB 3.077 8 files *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Warning : ./helloworld.link.zst is a symbolic link, ignoring ./hello.zst # Zstandard Frames: 1 DictID: 0 Window Size: 7 B (7 B) Compressed Size: 16 B (16 B) Decompressed Size: 7 B (7 B) Ratio: 0.4375 Check: None ./helloworld.zst # Zstandard Frames: 2 DictID: 0 Window Size: 7 B (7 B) Compressed Size: 40 B (40 B) Decompressed Size: 14 B (14 B) Ratio: 0.3500 Check: XXH64 ./tmp1.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21289 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0784 Check: XXH64 f53ad43d ./tmp12.zst # Zstandard Frames: 2 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 41.6 KiB (42578 B) Decompressed Size: 128 KiB (131074 B) Ratio: 3.0784 Check: XXH64 ./tmp123.zst # Zstandard Frames: 3 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 62.4 KiB (63867 B) Decompressed Size: 192 KiB (196611 B) Ratio: 3.0784 Check: XXH64 ./tmp2.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21289 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0784 Check: XXH64 f53ad43d ./tmp3.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21289 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0784 Check: XXH64 f53ad43d ./world.zst # Zstandard Frames: 1 DictID: 0 Window Size: 7 B (7 B) Compressed Size: 16 B (16 B) Decompressed Size: 7 B (7 B) Ratio: 0.4375 Check: None ===> zstd --list/-l error detection tests Frames Skips Compressed Uncompressed Ratio Check Filename File "tmp1" not compressed by zstd 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 tmp1.zst ----------------------------------------------------------------- 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 1 files Frames Skips Compressed Uncompressed Ratio Check Filename File "tmp1" not compressed by zstd 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 tmp1.zst 2 0 41.6 KiB 128 KiB 3.078 XXH64 tmp12.zst 3 0 62.4 KiB 192 KiB 3.078 XXH64 tmp123.zst File "tmp2" not compressed by zstd 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 tmp2.zst File "tmp3" not compressed by zstd 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 tmp3.zst ----------------------------------------------------------------- 8 0 166 KiB 512 KiB 3.078 XXH64 5 files *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** File "tmp1" not compressed by zstd tmp1.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21289 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0784 Check: XXH64 f53ad43d tmp12.zst # Zstandard Frames: 2 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 41.6 KiB (42578 B) Decompressed Size: 128 KiB (131074 B) Ratio: 3.0784 Check: XXH64 tmp123.zst # Zstandard Frames: 3 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 62.4 KiB (63867 B) Decompressed Size: 192 KiB (196611 B) Ratio: 3.0784 Check: XXH64 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** File "tmp2" not compressed by zstd tmp12.zst # Zstandard Frames: 2 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 41.6 KiB (42578 B) Decompressed Size: 128 KiB (131074 B) Ratio: 3.0784 Check: XXH64 test : detect truncated compressed file truncatable-input.txt : 29.61% ( 48.8 KiB => 14.5 KiB, truncatable-input.txt.zst) 100+0 records in 100+0 records out 100 bytes copied, 0.000130949 s, 764 kB/s Error: could not read checksum Error while parsing "truncated-input.txt.zst" Frames Skips Compressed Uncompressed Ratio Check Filename 0 0 100 B 48.8 KiB 500.000 XXH64 truncated-input.txt.zst ===> zstd --list/-l errors when presented with stdin / no files zstd: --list does not support reading from standard input No files given zstd: --list does not support reading from standard input zstd: --list does not support reading from standard input No files given zstd: --list does not support reading from standard input zstd: --list does not support reading from standard input zstd: --list does not support reading from standard input Frames Skips Compressed Uncompressed Ratio Check Filename 1 0 20.8 KiB 64.0 KiB 3.078 XXH64 tmp1.zst ===> zstd --list/-l test with null files tmp5 : ( 0 B => 13 B, tmp5.zst) Frames Skips Compressed Uncompressed Ratio Check Filename 1 0 13 B 0 B 0.000 XXH64 tmp5.zst Error: reached end of file with incomplete frame Frames Skips Compressed Uncompressed Ratio Check Filename File "tmp5" not compressed by zstd 1 0 13 B 0 B 0.000 XXH64 tmp5.zst ----------------------------------------------------------------- 1 0 13 B 0 B 0.000 XXH64 1 files *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Decompressed Size: 0 B (0 B) *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Error: reached end of file with incomplete frame File "tmp5" not compressed by zstd tmp5.zst # Zstandard Frames: 1 DictID: 0 Window Size: 0 B (0 B) Compressed Size: 13 B (13 B) Decompressed Size: 0 B (0 B) Ratio: 0.0000 Check: XXH64 51d8e999 ===> zstd --list/-l test with no content size field Frames Skips Compressed Uncompressed Ratio Check Filename 1 0 168 KiB XXH64 tmp6.zst *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** ===> zstd --list/-l test with no checksum tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zst) Frames Skips Compressed Uncompressed Ratio Check Filename 1 0 20.8 KiB 64.0 KiB 3.079 None tmp1.zst *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmp1.zst # Zstandard Frames: 1 DictID: 0 Window Size: 64.0 KiB (65537 B) Compressed Size: 20.8 KiB (21285 B) Decompressed Size: 64.0 KiB (65537 B) Ratio: 3.0790 Check: None ===> zstd trace tests tmp1 : 32.48% ( 64.0 KiB => 20.8 KiB, tmp1.zst) 3 files compressed : 32.48% ( 192 KiB => 62.4 KiB) zstd: WARNING: all input files will be processed and concatenated into a single output file: /dev/null The concatenated output CANNOT regenerate original file names nor directory structure. 3 files compressed : 32.48% ( 192 KiB => 62.4 KiB) 3 files compressed : 32.48% ( 192 KiB => 62.4 KiB) zstd: WARNING: all input files will be processed and concatenated into a single output file: /dev/null The concatenated output CANNOT regenerate original file names nor directory structure. 2 files compressed : 0.09% ( 128 KiB => 114 B) zstd: WARNING: all input files will be processed and concatenated into a single output file: /dev/null The concatenated output CANNOT regenerate original file names nor directory structure. 2 files compressed : 0.09% ( 128 KiB => 114 B) tmp1.zst : 65537 bytes 2 files decompressed : 131074 bytes total tmp1.zst : 65537 bytes 3 files decompressed : 196611 bytes total /*stdin*\ : 65537 bytes Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21510 (x3.047), 289.4 MB/s |-tmp1 : 65537 -> 21510 (x3.047), 289.4 MB/s, 1320.3 MB/s /-tmp1 : 65537 -> 21510 (x3.047), 289.4 MB/s, 1549.6 MB/s 1# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21406 (x3.062), 234.6 MB/s |-tmp1 : 65537 -> 21406 (x3.062), 234.6 MB/s, 1379.2 MB/s /-tmp1 : 65537 -> 21406 (x3.062), 234.6 MB/s, 1379.2 MB/s 2# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21285 (x3.079), 110.6 MB/s |-tmp1 : 65537 -> 21285 (x3.079), 110.6 MB/s, 1417.7 MB/s /-tmp1 : 65537 -> 21285 (x3.079), 167.5 MB/s /-tmp1 : 65537 -> 21285 (x3.079), 167.5 MB/s, 1418.3 MB/s 3# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 22583 (x2.902), 78.0 MB/s |-tmp1 : 65537 -> 22583 (x2.902), 78.0 MB/s, 933.6 MB/s /-tmp1 : 65537 -> 22583 (x2.902), 78.0 MB/s /-tmp1 : 65537 -> 22583 (x2.902), 78.0 MB/s, 936.7 MB/s 4# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 22115 (x2.963), 59.4 MB/s |-tmp1 : 65537 -> 22115 (x2.963), 59.4 MB/s, 945.1 MB/s 5# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 22024 (x2.976), 67.6 MB/s |-tmp1 : 65537 -> 22024 (x2.976), 67.6 MB/s, 965.9 MB/s /-tmp1 : 65537 -> 22024 (x2.976), 69.0 MB/s 6# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21986 (x2.981), 59.0 MB/s |-tmp1 : 65537 -> 21986 (x2.981), 59.0 MB/s, 955.0 MB/s /-tmp1 : 65537 -> 21986 (x2.981), 59.0 MB/s, 983.4 MB/s 7# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21928 (x2.989), 60.7 MB/s |-tmp1 : 65537 -> 21928 (x2.989), 60.7 MB/s, 974.0 MB/s 8# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21893 (x2.994), 12.5 MB/s |-tmp1 : 65537 -> 21893 (x2.994), 12.5 MB/s, 963.2 MB/s /-tmp1 : 65537 -> 21893 (x2.994), 12.5 MB/s, 991.4 MB/s 9# Loading tmp1... |-tmp1 : 65537 -> |-tmp1 : 65537 -> 21854 (x2.999), 45.9 MB/s |-tmp1 : 65537 -> 21854 (x2.999), 45.9 MB/s, 980.5 MB/s 10# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 64530 (x3.047), 257.0 MB/s |- 3 files : 196611 -> 64530 (x3.047), 257.0 MB/s, 1517.4 MB/s /- 3 files : 196611 -> 64530 (x3.047), 291.1 MB/s /- 3 files : 196611 -> 64530 (x3.047), 291.1 MB/s, 1517.4 MB/s 1# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 64218 (x3.062), 210.1 MB/s |- 3 files : 196611 -> 64218 (x3.062), 210.1 MB/s, 1375.6 MB/s /- 3 files : 196611 -> 64218 (x3.062), 210.1 MB/s 2# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 63855 (x3.079), 147.5 MB/s |- 3 files : 196611 -> 63855 (x3.079), 147.5 MB/s, 240.6 MB/s 3# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 67749 (x2.902), 115.3 MB/s |- 3 files : 196611 -> 67749 (x2.902), 115.3 MB/s, 956.4 MB/s 4# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 66345 (x2.963), 29.0 MB/s |- 3 files : 196611 -> 66345 (x2.963), 29.0 MB/s, 947.7 MB/s 5# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 66072 (x2.976), 27.9 MB/s |- 3 files : 196611 -> 66072 (x2.976), 27.9 MB/s, 965.5 MB/s 6# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 65958 (x2.981), 27.0 MB/s |- 3 files : 196611 -> 65958 (x2.981), 27.0 MB/s, 966.9 MB/s 7# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 65784 (x2.989), 59.8 MB/s |- 3 files : 196611 -> 65784 (x2.989), 59.8 MB/s, 45.9 MB/s 8# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 65679 (x2.994), 25.2 MB/s |- 3 files : 196611 -> 65679 (x2.994), 25.2 MB/s, 973.8 MB/s 9# Loading tmp1... Loading tmp2... Loading tmp3... |- 3 files : 196611 -> |- 3 files : 196611 -> 65562 (x2.999), 23.5 MB/s |- 3 files : 196611 -> 65562 (x2.999), 23.5 MB/s, 194.5 MB/s 10# ===> zstd long distance matching tests roundTripTest: datagen -g0 | zstd -v --single-thread --long | zstd -d --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : ( 0 B => 13 B, /*stdout*\) roundTripTest: datagen -g9M | zstd -v2 --single-thread --long | zstd -d2 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.02% ( 9.00 MiB => 2.79 MiB, /*stdout*\) roundTripTest: datagen -g1M -P50 | zstd -v1 --single-thread --long=29 | zstd -d --memory=512MB *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.24% ( 1.000 MiB => 320 KiB, /*stdout*\) roundTripTest: datagen -g1M -P50 | zstd -v1 --single-thread --long=29 --zstd=wlog=28 | zstd -d --memory=256MB *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.24% ( 1.000 MiB => 320 KiB, /*stdout*\) roundTripTest: datagen -g1M -P50 | zstd -v1 --single-thread --long=29 | zstd -d --long=28 --memory=512MB *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.24% ( 1.000 MiB => 320 KiB, /*stdout*\) roundTripTest: datagen -g1M -P50 | zstd -v1 --single-thread --long=29 | zstd -d --zstd=wlog=28 --memory=512MB *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.24% ( 1.000 MiB => 320 KiB, /*stdout*\) ===> zstd long distance matching with optimal parser compressed size tests ===> zstd asyncio tests roundTripTest: datagen -g2M | zstd -v3 --asyncio --format=zstd | zstd -d3 --asyncio --format=zstd *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.23% ( 2.00 MiB => 660 KiB, /*stdout*\) roundTripTest: datagen -g2M | zstd -v3 --no-asyncio --format=zstd | zstd -d3 --no-asyncio --format=zstd *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.23% ( 2.00 MiB => 660 KiB, /*stdout*\) ===> adaptive mode roundTripTest: datagen -g270000000 | zstd -v --adapt | zstd -d --adapt *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.96% ( 257 MiB => 84.9 MiB, /*stdout*\) roundTripTest: datagen -g27000000 | zstd -v --adapt=min=1,max=4 | zstd -d --adapt=min=1,max=4 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.47% ( 25.7 MiB => 8.36 MiB, /*stdout*\) roundTripTest: datagen -g27000000 | zstd -v --adapt=min=-2,max=-1 | zstd -d --adapt=min=-2,max=-1 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 54.09% ( 25.7 MiB => 13.9 MiB, /*stdout*\) ===> test: --adapt must fail on incoherent bounds Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. incoherent adaptation limits Incorrect parameters Compress or decompress the INPUT file(s); reads from STDIN if INPUT is `-` or not provided. Usage: zstd [OPTIONS...] [INPUT... | -] [-o OUTPUT] Options: -o OUTPUT Write output to a single file, OUTPUT. -k, --keep Preserve INPUT file(s). [Default] --rm Remove INPUT file(s) after successful (de)compression. -# Desired compression level, where `#` is a number between 1 and 19; lower numbers provide faster compression, higher numbers yield better compression ratios. [Default: 3] -d, --decompress Perform decompression. -D DICT Use DICT as the dictionary for compression or decompression. -f, --force Disable input and output checks. Allows overwriting existing files, receiving input from the console, printing output to STDOUT, and operating on links, block devices, etc. Unrecognized formats will be passed-through through as-is. -h Display short usage and exit. -H, --help Display full help and exit. -V, --version Display the program version and exit. ===> rsyncable mode roundTripTest: datagen -g10M | zstd -v --rsyncable | zstd -d --rsyncable *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.31% ( 10.0 MiB => 3.23 MiB, /*stdout*\) roundTripTest: datagen -g10M | zstd -v --rsyncable -B100K | zstd -d --rsyncable -B100K *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.23% ( 10.0 MiB => 3.22 MiB, /*stdout*\) ===> test: --rsyncable must fail with --single-thread *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** zstd: error 1 : Rsyncable mode is not compatible with single thread mode ===> patch-from=origin tests tmp_patch : 82.70% ( 1000 B => 827 B, tmp_patch_diff) tmp_patch_diff : 1000 bytes Files tmp_patch_recon and tmp_patch are identical ===> alternate syntax: patch-from origin tmp_patch : 82.70% ( 1000 B => 827 B, tmp_patch_diff) tmp_patch_diff : 1000 bytes Files tmp_patch_recon and tmp_patch are identical ===> patch-from recursive tests error : can't use --patch-from=# on multiple files ===> patch-from long mode trigger larger file test long mode automatically triggered ===> patch-from very large dictionary and file test tmp_patch : 12.25% ( 95.4 MiB => 11.7 MiB, tmp_patch.zst) tmp_patch.zst : 100000000 bytes Files tmp_patch_recon and tmp_patch are identical ===> patch-from --stream-size test zstd: error 42 : Using --patch-from with stdin requires --stream-size /*stdin*\ : 82.70% ( 1000 B => 827 B, tmp_patch_diff) ===> large files tests roundTripTest: datagen -g270000000 | zstd -v1 | zstd -d1 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.77% ( 257 MiB => 81.8 MiB, /*stdout*\) roundTripTest: datagen -g250000000 | zstd -v2 | zstd -d2 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 31.54% ( 238 MiB => 75.2 MiB, /*stdout*\) roundTripTest: datagen -g230000000 | zstd -v3 | zstd -d3 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 32.58% ( 219 MiB => 71.5 MiB, /*stdout*\) roundTripTest: datagen -g140000000 -P60 | zstd -v4 | zstd -d4 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 28.03% ( 134 MiB => 37.4 MiB, /*stdout*\) roundTripTest: datagen -g130000000 -P62 | zstd -v5 | zstd -d5 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 25.95% ( 124 MiB => 32.2 MiB, /*stdout*\) roundTripTest: datagen -g120000000 -P65 | zstd -v6 | zstd -d6 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 24.15% ( 114 MiB => 27.6 MiB, /*stdout*\) roundTripTest: datagen -g70000000 -P70 | zstd -v7 | zstd -d7 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 21.58% ( 66.8 MiB => 14.4 MiB, /*stdout*\) roundTripTest: datagen -g60000000 -P71 | zstd -v8 | zstd -d8 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 20.79% ( 57.2 MiB => 11.9 MiB, /*stdout*\) roundTripTest: datagen -g50000000 -P73 | zstd -v9 | zstd -d9 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 19.88% ( 47.7 MiB => 9.48 MiB, /*stdout*\) roundTripTest: datagen -g35000000 -P75 | zstd -v10 | zstd -d10 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 18.79% ( 33.4 MiB => 6.27 MiB, /*stdout*\) roundTripTest: datagen -g30000000 -P76 | zstd -v11 | zstd -d11 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 18.28% ( 28.6 MiB => 5.23 MiB, /*stdout*\) roundTripTest: datagen -g25000000 -P78 | zstd -v12 | zstd -d12 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 17.34% ( 23.8 MiB => 4.13 MiB, /*stdout*\) roundTripTest: datagen -g18000013 -P80 | zstd -v13 | zstd -d13 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 15.87% ( 17.2 MiB => 2.72 MiB, /*stdout*\) roundTripTest: datagen -g18000014 -P80 | zstd -v14 | zstd -d14 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 15.86% ( 17.2 MiB => 2.72 MiB, /*stdout*\) roundTripTest: datagen -g18000015 -P81 | zstd -v15 | zstd -d15 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 15.33% ( 17.2 MiB => 2.63 MiB, /*stdout*\) roundTripTest: datagen -g18000016 -P84 | zstd -v16 | zstd -d16 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 12.27% ( 17.2 MiB => 2.11 MiB, /*stdout*\) roundTripTest: datagen -g18000017 -P88 | zstd -v17 | zstd -d17 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 10.55% ( 17.2 MiB => 1.81 MiB, /*stdout*\) roundTripTest: datagen -g18000018 -P94 | zstd -v18 | zstd -d18 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 7.77% ( 17.2 MiB => 1.33 MiB, /*stdout*\) roundTripTest: datagen -g18000019 -P96 | zstd -v19 | zstd -d19 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 6.91% ( 17.2 MiB => 1.19 MiB, /*stdout*\) roundTripTest: datagen -g5000000000 -P99 | zstd -v1 --zstd=wlog=25 | zstd -d1 --zstd=wlog=25 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 9.39% ( 4.66 GiB => 448 MiB, /*stdout*\) roundTripTest: datagen -g3700000000 -P0 | zstd -v1 --zstd=strategy=6,wlog=25 | zstd -d1 --zstd=strategy=6,wlog=25 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ :100.00% ( 3.45 GiB => 3.45 GiB, /*stdout*\) fileRoundTripTest: datagen -g4193M -P99 > tmp && zstd -v1 -c tmp | zstd -d1 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** tmp : 9.36% ( 4.09 GiB => 393 MiB, /*stdout*\) ===> zstd long, long distance matching round-trip tests roundTripTest: datagen -g270000000 | zstd -v1 --single-thread --long | zstd -d1 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 19.52% ( 257 MiB => 50.3 MiB, /*stdout*\) roundTripTest: datagen -g130000000 -P60 | zstd -v5 --single-thread --long | zstd -d5 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 27.31% ( 124 MiB => 33.9 MiB, /*stdout*\) roundTripTest: datagen -g35000000 -P70 | zstd -v8 --single-thread --long | zstd -d8 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 21.82% ( 33.4 MiB => 7.28 MiB, /*stdout*\) roundTripTest: datagen -g18000001 -P80 | zstd -v18 --single-thread --long | zstd -d18 --single-thread --long *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 14.31% ( 17.2 MiB => 2.46 MiB, /*stdout*\) roundTripTest: datagen -g700M -P50 | zstd -v1 --single-thread --long=29 | zstd -d1 --single-thread --long=29 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 8.03% ( 700 MiB => 56.2 MiB, /*stdout*\) roundTripTest: datagen -g600M -P50 | zstd -v1 --single-thread --long --zstd=wlog=29,clog=28 | zstd -d1 --single-thread --long --zstd=wlog=29,clog=28 *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 9.37% ( 600 MiB => 56.2 MiB, /*stdout*\) ===> zstdmt long round-trip tests roundTripTest: datagen -g80000000 -P99 | zstd -v19 -T2 | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 5.75% ( 76.3 MiB => 4.39 MiB, /*stdout*\) roundTripTest: datagen -g5000000000 -P99 | zstd -v1 -T2 | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 9.36% ( 4.66 GiB => 446 MiB, /*stdout*\) roundTripTest: datagen -g500000000 -P97 | zstd -v1 -T999 | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 9.86% ( 477 MiB => 47.0 MiB, /*stdout*\) fileRoundTripTest: datagen -g4103M -P98 > tmp && zstd -v -T0 -c tmp | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** Note: 8 physical core(s) detected tmp : 10.23% ( 4.01 GiB => 420 MiB, /*stdout*\) roundTripTest: datagen -g400000000 -P97 | zstd -v1 --long=24 -T2 | zstd -d *** Zstandard CLI (64-bit) v1.5.5, by Yann Collet *** /*stdin*\ : 8.21% ( 381 MiB => 31.3 MiB, /*stdout*\) ===> cover dictionary builder : advanced options - Create first dictionary ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Constructing partial suffix array Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 612 epochs of size 1453 0% statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file tmpDict tmp : 18.32% ( 74.9 KiB => 13.7 KiB, tmp.zst) error : can't use -D and --patch-from=# at the same time tmp.zst : 76704 bytes ! Warning : nb of samples too low for proper processing ! ! Please provide _one file per sample_. ! Alternatively, split files into fixed-size blocks representative of samples, with -B# Error 14 : nb of samples too low - Create second (different) dictionary Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../tests/paramgrill.c... Training on 37 samples of total size 955576 Testing on 37 samples of total size 955576 Constructing partial suffix array Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 955569! size(source)/size(dictionary) = 8.483390, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 502 epochs of size 1903 0% 88% statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file tmpDictC tmp.zst : Decoding error (36) : Dictionary mismatch - Create dictionary using shrink-dict flag ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 558 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 0% 0% 0% 0% 1% 1% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 5% 5% 5% 5% 5% 6% 6% 6% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 56% 56% 56% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 86% 86% 86% 87% 87% 87% 88% 88% 88% 89% 89% 89% 90% 90% 91% 91% 91% 92% 92% 92% 93% 93% 93% 94% 94% 94% 95% 95% 96% 96% 96% 97% 97% 97% 98% 98% 98% 99% 99% 100% k=757 d=6 steps=256 split=100 Save dictionary of size 112640 into file tmpShrinkDict ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 558 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 0% 0% 0% 0% 1% 1% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 5% 5% 5% 5% 6% 6% 6% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 54% 55% 55% 55% 55% 55% 56% 56% 56% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 86% 86% 86% 87% 87% 87% 88% 88% 88% 89% 89% 89% 90% 90% 91% 91% 91% 92% 92% 92% 93% 93% 93% 94% 94% 94% 95% 95% 96% 96% 96% 97% 97% 97% 98% 98% 98% 99% 99% 100% k=757 d=6 steps=256 split=100 Save dictionary of size 112640 into file tmpShrinkDict1 ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 558 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 0% 0% 0% 0% 1% 1% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 5% 5% 5% 5% 5% 6% 6% 6% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 56% 56% 56% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 86% 86% 86% 87% 87% 87% 88% 88% 88% 89% 89% 89% 90% 90% 91% 91% 91% 92% 92% 92% 93% 93% 93% 94% 94% 94% 95% 95% 96% 96% 96% 97% 97% 97% 98% 98% 98% 99% 99% 100% k=757 d=6 steps=256 split=100 Save dictionary of size 112640 into file tmpShrinkDict2 ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 558 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 0% 0% 0% 0% 1% 1% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 5% 5% 6% 6% 6% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 52% 52% 52% 53% 53% 53% 53% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 56% 56% 56% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 60% 60% 61% 61% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 86% 86% 86% 87% 87% 87% 88% 88% 88% 89% 89% 89% 90% 90% 91% 91% 91% 92% 92% 92% 93% 93% 93% 94% 94% 94% 95% 95% 96% 96% 96% 97% 97% 97% 98% 98% 98% 99% 99% 100% k=757 d=6 steps=256 split=100 Save dictionary of size 112640 into file tmpShrinkDict3 - Create dictionary with short dictID ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Training on 25 samples of total size 889283 Testing on 25 samples of total size 889283 Constructing partial suffix array Computing frequencies WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! Building dictionary Breaking content into 612 epochs of size 1453 0% statistics ... Constructed dictionary of size 112640 Save dictionary of size 112640 into file tmpDict1 tmpDict tmpDict1 differ: char 5, line 1 - Create dictionary with size limit Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 18 different sets of parameters 5% 16% 22% 33% 50% 55% 66% 72% 77% 88% 100% k=779 d=8 steps=8 split=100 Save dictionary of size 4096 into file tmpDict2 - Compare size of dictionary from 90% training samples with 80% training samples ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 82 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 744056! size(source)/size(dictionary) = 6.605611, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 1% 3% 6% 8% 10% 13% 15% 18% 20% 23% 25% 28% 30% 32% 35% 37% 40% 42% 45% 47% 50% 51% 53% 56% 58% 60% 63% 65% 68% 70% 73% 75% 78% 80% 82% 85% 87% 90% 92% 95% 97% 100% k=674 d=6 steps=40 split=90 Save dictionary of size 112640 into file dictionary ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 82 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 608915! size(source)/size(dictionary) = 5.405850, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 1% 3% 6% 8% 10% 13% 17% 20% 23% 25% 29% 32% 36% 40% 43% 47% 51% 53% 56% 58% 60% 63% 65% 68% 70% 73% 75% 79% 82% 86% 89% 91% 93% 96% 98% k=626 d=8 steps=40 split=80 Save dictionary of size 112640 into file dictionary - Create dictionary using all samples for both training and testing ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 82 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 1% 2% 4% 6% 8% 10% 13% 15% 18% 20% 23% 25% 28% 30% 32% 35% 37% 40% 42% 45% 47% 50% 51% 52% 54% 56% 58% 60% 63% 65% 68% 70% 73% 75% 78% 80% 82% 85% 87% 90% 92% 95% 97% 100% k=626 d=8 steps=40 split=100 Save dictionary of size 112640 into file dictionary - Test -o before --train-cover ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 82 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 1% 2% 4% 6% 8% 10% 13% 15% 18% 20% 23% 25% 28% 30% 32% 35% 37% 40% 42% 45% 47% 50% 51% 52% 54% 56% 58% 60% 63% 65% 68% 70% 73% 75% 78% 80% 82% 85% 87% 90% 92% 95% 97% 100% k=626 d=8 steps=40 split=100 Save dictionary of size 112640 into file tmpDict ! Warning : data size of samples too small for target dictionary size ! Samples should be about 100x larger than target dictionary size Loading /usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests/../programs/zstdcli_trace.c... Trying 82 different sets of parameters WARNING: The maximum dictionary size 112640 is too large compared to the source size 889276! size(source)/size(dictionary) = 7.894851, but it should be >= 10! This may lead to a subpar dictionary! We recommend training on sources at least 10x, and preferably 100x the size of the dictionary! 1% 2% 4% 6% 8% 10% 13% 15% 18% 20% 23% 25% 28% 30% 32% 35% 37% 40% 42% 45% 47% 50% 51% 52% 54% 56% 58% 60% 62% 64% 67% 69% 71% 74% 76% 79% 81% 84% 86% 89% 91% 93% 96% 98% k=626 d=8 steps=40 split=100 Save dictionary of size 112640 into file dictionary make: Leaving directory '/usr/src/RPM/BUILD/zstd-1.5.5-alt1/tests' make: Target 'test' not remade because of errors. error: Bad exit status from /usr/src/tmp/rpm-tmp.63050 (%check) RPM build errors: Bad exit status from /usr/src/tmp/rpm-tmp.63050 (%check) Command exited with non-zero status 1 1347.53user 71.01system 16:48.54elapsed 140%CPU (0avgtext+0avgdata 1951652maxresident)k 0inputs+0outputs (0major+7391424minor)pagefaults 0swaps hsh-rebuild: rebuild of `zstd-1.5.5-alt1.src.rpm' failed. Command exited with non-zero status 1 6.07user 2.36system 17:04.19elapsed 0%CPU (0avgtext+0avgdata 126164maxresident)k 2032inputs+0outputs (0major+196778minor)pagefaults 0swaps