<86>Jul 13 09:03:43 userdel[2531960]: delete user 'rooter' <86>Jul 13 09:03:43 userdel[2531960]: removed group 'rooter' owned by 'rooter' <86>Jul 13 09:03:43 userdel[2531960]: removed shadow group 'rooter' owned by 'rooter' <86>Jul 13 09:03:43 groupadd[2531986]: group added to /etc/group: name=rooter, GID=1796 <86>Jul 13 09:03:43 groupadd[2531986]: group added to /etc/gshadow: name=rooter <86>Jul 13 09:03:43 groupadd[2531986]: new group: name=rooter, GID=1796 <86>Jul 13 09:03:43 useradd[2532013]: new user: name=rooter, UID=1796, GID=1796, home=/root, shell=/bin/bash, from=none <86>Jul 13 09:03:43 userdel[2532053]: delete user 'builder' <86>Jul 13 09:03:43 userdel[2532053]: removed group 'builder' owned by 'builder' <86>Jul 13 09:03:43 userdel[2532053]: removed shadow group 'builder' owned by 'builder' <86>Jul 13 09:03:43 groupadd[2532087]: group added to /etc/group: name=builder, GID=1797 <86>Jul 13 09:03:43 groupadd[2532087]: group added to /etc/gshadow: name=builder <86>Jul 13 09:03:43 groupadd[2532087]: new group: name=builder, GID=1797 <86>Jul 13 09:03:43 useradd[2532128]: new user: name=builder, UID=1797, GID=1797, home=/usr/src, shell=/bin/bash, from=none <13>Jul 13 09:03:51 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432033 installed <13>Jul 13 09:03:51 rpmi: libgdbm-1.8.3-alt10 sisyphus+346222.200.3.2 1716468406 installed <13>Jul 13 09:03:51 rpmi: libexpat-2.5.0-alt1 sisyphus+346180.200.2.1 1716349845 installed <13>Jul 13 09:03:51 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962878 installed <13>Jul 13 09:03:51 rpmi: libp11-kit-1:0.25.5-alt1 sisyphus+352553.100.1.1 1720622586 installed <13>Jul 13 09:03:51 rpmi: libtasn1-4.19.0-alt3 sisyphus+327816.100.1.1 1692802618 installed <13>Jul 13 09:03:51 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Jul 13 09:03:51 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Jul 13 09:03:51 rpmi: ca-certificates-2024.07.01-alt1 sisyphus+351897.100.1.1 1719826350 installed <13>Jul 13 09:03:51 rpmi: ca-trust-0.2.0-alt1 sisyphus+344843.100.1.1 1712743326 installed <13>Jul 13 09:03:51 rpmi: p11-kit-trust-1:0.25.5-alt1 sisyphus+352553.100.1.1 1720622586 installed <13>Jul 13 09:03:51 rpmi: libcrypto3-3.1.6-alt1 sisyphus+350419.100.1.1 1717605920 installed <13>Jul 13 09:03:51 rpmi: libssl3-3.1.6-alt1 sisyphus+350419.100.1.1 1717605920 installed <13>Jul 13 09:03:51 rpmi: python3-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Jul 13 09:03:52 rpmi: python3-base-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Jul 13 09:03:52 rpmi: python3-module-py3dephell-0.1.0-alt2 sisyphus+328191.600.5.1 1693609196 installed <13>Jul 13 09:03:52 rpmi: tests-for-installed-python3-pkgs-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>Jul 13 09:03:52 rpmi: rpm-build-python3-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>Jul 13 09:03:52 rpmi: rpm-build-tcl-0.6.2-alt1 sisyphus+299320.100.1.1 1651401392 installed <13>Jul 13 09:03:57 rpmi: xorg-proto-devel-2024.1-alt1 sisyphus+343583.40.1.1 1711440649 installed <13>Jul 13 09:03:58 rpmi: libjpeg-2:3.0.2-alt2.1 sisyphus+340135.100.1.1 1707449053 installed <13>Jul 13 09:03:58 rpmi: libpng16-1.6.42-alt2 sisyphus+339555.100.1.1 1706781690 installed <13>Jul 13 09:03:58 rpmi: libwayland-client-1.23.0-alt1.1 sisyphus+350009.200.1.1 1717137154 installed <13>Jul 13 09:03:58 rpmi: gobject-introspection-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Jul 13 09:03:58 rpmi: libatk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Jul 13 09:03:58 rpmi: libglvnd-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Jul 13 09:03:58 rpmi: libboost_system1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:03:58 rpmi: xml-utils-1:2.12.8-alt1 sisyphus+352486.100.2.1 1720626953 installed <13>Jul 13 09:03:58 rpmi: liblcms2-2.16-alt1 sisyphus+335676.100.1.1 1701682605 installed <13>Jul 13 09:03:58 rpmi: gobject-introspection-x11-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Jul 13 09:03:58 rpmi: perl-HTTP-Date-6.06-alt1 sisyphus+324527.100.1.1 1688834564 installed <13>Jul 13 09:03:58 rpmi: perl-XML-NamespaceSupport-1.12-alt1 1491296348 installed <13>Jul 13 09:03:58 rpmi: zlib-devel-1.3.1-alt1 sisyphus+342532.100.1.1 1710232285 installed <13>Jul 13 09:03:58 rpmi: libtcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Jul 13 09:03:58 rpmi: tcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Jul 13 09:03:58 rpmi: libquadmath0-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Jul 13 09:03:58 rpmi: libkmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Jul 13 09:03:58 rpmi: libwebp7-1.4.0-alt1 sisyphus+345159.200.1.1 1713168690 installed <13>Jul 13 09:03:58 rpmi: libICE-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Jul 13 09:03:58 rpmi: libfribidi-1.0.15-alt1 sisyphus+350522.100.1.1 1717745769 installed <13>Jul 13 09:03:58 rpmi: libSM-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Jul 13 09:03:58 rpmi: rpm-build-gir-0.7.3-alt3.1 sisyphus+319393.100.1.1 1682538783 installed <13>Jul 13 09:03:58 rpmi: libatk-gir-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Jul 13 09:03:58 rpmi: libepoxy-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Jul 13 09:03:58 rpmi: libusb-1.0.27-alt1 sisyphus+347412.100.1.1 1714739652 installed <13>Jul 13 09:03:58 rpmi: libopenblas-0.3.27-alt1 sisyphus+348275.100.2.1 1716195843 installed <13>Jul 13 09:03:58 rpmi: libwayland-server-1.23.0-alt1.1 sisyphus+350009.200.1.1 1717137154 installed <13>Jul 13 09:03:58 rpmi: perl-LWP-MediaTypes-6.04-alt1 sisyphus+225468.100.1.1 1553186684 installed <13>Jul 13 09:03:58 rpmi: perl-Compress-Raw-Zlib-2.206-alt1 sisyphus+335067.600.1.1 1700901614 installed <13>Jul 13 09:03:58 rpmi: perl-libnet-1:3.15-alt1 sisyphus+317310.100.1.1 1679580208 installed <13>Jul 13 09:03:58 rpmi: perl-XML-SAX-Base-1.09-alt1 1494364363 installed <13>Jul 13 09:03:58 rpmi: gtk-builder-convert-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Jul 13 09:03:58 rpmi: libgirepository1.0-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Jul 13 09:03:58 rpmi: python3-module-Pygments-2.18.0-alt1 sisyphus+347552.100.1.1 1714992955 installed <13>Jul 13 09:03:58 rpmi: libsqlite3-3.44.2-alt1 sisyphus+335409.100.3.3 1701347861 installed <13>Jul 13 09:03:58 rpmi: libnspr-1:4.35-alt1 sisyphus+308164.100.1.1 1665397042 installed <13>Jul 13 09:03:58 rpmi: python3-module-pkg_resources-1:70.3.0-alt1 sisyphus+352532.100.2.1 1720689196 installed <13>Jul 13 09:03:59 rpmi: libicu74-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>Jul 13 09:03:59 rpmi: libgomp1-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Jul 13 09:03:59 rpmi: libltdl7-2.4.7-alt5 sisyphus+341963.200.3.1 1711659248 installed <13>Jul 13 09:03:59 rpmi: libopenjpeg2.0-2.5.2-alt1 sisyphus+341637.100.1.1 1709150019 installed <13>Jul 13 09:03:59 rpmi: libverto-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Jul 13 09:03:59 rpmi: libcom_err-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Jul 13 09:03:59 rpmi: libbrotlicommon-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Jul 13 09:03:59 rpmi: libbrotlidec-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Jul 13 09:03:59 rpmi: libgraphite2-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Jul 13 09:03:59 rpmi: libharfbuzz-9.0.0-alt1 sisyphus+351755.100.1.1 1719584143 installed <13>Jul 13 09:03:59 rpmi: libfreetype-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Jul 13 09:03:59 rpmi: libfontconfig1-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Jul 13 09:03:59 rpmi: libharfbuzz-gobject-9.0.0-alt1 sisyphus+351755.100.1.1 1719584143 installed <13>Jul 13 09:03:59 rpmi: libharfbuzz-gir-9.0.0-alt1 sisyphus+351755.100.1.1 1719584143 installed <13>Jul 13 09:03:59 rpmi: libXau-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Jul 13 09:03:59 rpmi: libXau-devel-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Jul 13 09:03:59 rpmi: fontconfig-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed Updating fonts cache: <29>Jul 13 09:04:00 fontconfig: Updating fonts cache: succeeded [ DONE ] <13>Jul 13 09:04:00 rpmi: libraqm-0.7.1-alt1 sisyphus+279320.100.1.2 1626503405 installed <13>Jul 13 09:04:00 rpmi: libharfbuzz-icu-9.0.0-alt1 sisyphus+351755.100.1.1 1719584143 installed <13>Jul 13 09:04:00 rpmi: libgraphite2-devel-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Jul 13 09:04:01 rpmi: libbrotlienc-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Jul 13 09:04:01 rpmi: libcom_err-devel-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Jul 13 09:04:01 rpmi: libverto-devel-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Jul 13 09:04:01 rpmi: libraw-0.21.2-alt1 sisyphus+336806.100.1.1 1703007433 installed <13>Jul 13 09:04:01 rpmi: icu-utils-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>Jul 13 09:04:01 rpmi: libicu-devel-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>Jul 13 09:04:01 rpmi: libnss-3.102-alt1 sisyphus+352250.100.1.1 1720184718 installed <13>Jul 13 09:04:01 rpmi: python3-module-nss-1.0.1-alt7 sisyphus+333513.61400.73.1 1704655181 installed <13>Jul 13 09:04:01 rpmi: libICE-devel-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Jul 13 09:04:01 rpmi: libSM-devel-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Jul 13 09:04:01 rpmi: kmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Jul 13 09:04:01 rpmi: libquadmath13-devel-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Jul 13 09:04:01 rpmi: libquadmath-devel-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Jul 13 09:04:01 rpmi: libboost_charconv1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libgfortran5-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Jul 13 09:04:01 rpmi: tcl-devel-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Jul 13 09:04:01 rpmi: libpng-devel-1.6.42-alt2 sisyphus+339555.100.1.1 1706781690 installed <13>Jul 13 09:04:01 rpmi: perl-File-Listing-6.16-alt1 sisyphus+325783.100.1.1 1690559356 installed <13>Jul 13 09:04:01 rpmi: libboost_atomic1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libboost_contract1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libboost_chrono1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libboost_timer1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libboost_thread1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libboost_type_erasure1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libOpenGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Jul 13 09:04:01 rpmi: libGLES-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Jul 13 09:04:01 rpmi: libwayland-cursor-1.23.0-alt1.1 sisyphus+350009.200.1.1 1717137154 installed <13>Jul 13 09:04:01 rpmi: libwayland-egl-4:18.1.0-alt1.1 sisyphus+350009.200.1.1 1717137154 installed <13>Jul 13 09:04:01 rpmi: groff-base-1.22.3-alt2 sisyphus+346264.200.2.1 1716421485 installed <13>Jul 13 09:04:01 rpmi: libpipeline-1.5.7-alt1_1 sisyphus+312433.100.1.1 1671879776 installed <13>Jul 13 09:04:01 rpmi: libmodbus-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Jul 13 09:04:01 rpmi: openldap-common-2.6.8-alt1 sisyphus+351621.100.1.1 1719420449 installed <13>Jul 13 09:04:01 rpmi: wayland-devel-1.23.0-alt1.1 sisyphus+350009.200.1.1 1717137154 installed <13>Jul 13 09:04:01 rpmi: libwayland-client-devel-1.23.0-alt1.1 sisyphus+350009.200.1.1 1717137154 installed <13>Jul 13 09:04:01 rpmi: libxkbcommon-1.7.0-alt1.1 sisyphus+343672.100.1.1 1711490815 installed <13>Jul 13 09:04:01 rpmi: libgudev-1:238-alt1 sisyphus+324364.100.1.1 1688646145 installed <13>Jul 13 09:04:01 rpmi: libboost_python3-1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:01 rpmi: libxblas-1.0.248-alt2 sisyphus+285045.40.2.1 1631388462 installed <13>Jul 13 09:04:02 rpmi: liblapack-1:3.8.0-alt7 sisyphus+340675.300.1.1 1707908362 installed <13>Jul 13 09:04:02 rpmi: python3-module-numpy-1:1.26.4-alt1 sisyphus+341164.200.2.1 1708505996 installed <13>Jul 13 09:04:02 rpmi: libboost_numpy3-1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:02 rpmi: libxshmfence-1.3.2-alt1 sisyphus+311428.400.1.1 1670577529 installed <13>Jul 13 09:04:02 rpmi: libpciaccess-1:0.18.1-alt1 sisyphus+343583.300.1.1 1711440792 installed <13>Jul 13 09:04:02 rpmi: libdrm-1:2.4.122-alt1 sisyphus+352241.100.1.1 1720177130 installed <13>Jul 13 09:04:02 rpmi: less-633-alt1 sisyphus+328181.300.2.1 1693321749 installed <13>Jul 13 09:04:02 rpmi: perl-Try-Tiny-0.31-alt1 sisyphus+290597.100.1.1 1637915507 installed <13>Jul 13 09:04:02 rpmi: perl-IO-Socket-IP-0.42-alt1 sisyphus+325815.100.1.2 1690571193 installed <13>Jul 13 09:04:02 rpmi: perl-Module-Load-0.36-alt1 sisyphus+258992.100.1.1 1601543407 installed <13>Jul 13 09:04:02 rpmi: perl-Compress-Raw-Bzip2-2.210-alt1 sisyphus+343108.100.1.3 1710881036 installed <13>Jul 13 09:04:02 rpmi: perl-IO-Compress-Brotli-2:0.004001-alt3 sisyphus+335067.1200.1.1 1700901700 installed <13>Jul 13 09:04:02 rpmi: perl-Clone-0.46-alt1 sisyphus+335067.1100.1.1 1700901674 installed <13>Jul 13 09:04:02 rpmi: perl-HTML-Tagset-3.24-alt1 sisyphus+343117.100.1.3 1710883587 installed <13>Jul 13 09:04:02 rpmi: perl-Term-ANSIColor-5.01-alt1 sisyphus+244783.100.1.2 1579747505 installed <13>Jul 13 09:04:02 rpmi: perl-Data-Dump-1.25-alt1 sisyphus+276551.100.1.1 1625126880 installed <13>Jul 13 09:04:02 rpmi: perl-Filter-1.64-alt1 sisyphus+335067.400.1.1 1700901530 installed <13>Jul 13 09:04:02 rpmi: perl-Encode-3.21-alt1 sisyphus+343095.100.1.1 1710875480 installed <13>Jul 13 09:04:02 rpmi: perl-URI-5.27-alt1 sisyphus+340901.100.1.1 1708180683 installed <13>Jul 13 09:04:02 rpmi: perl-IO-Compress-2.206-alt1 sisyphus+325819.100.1.1 1690563199 installed <13>Jul 13 09:04:02 rpmi: perl-Net-HTTP-6.23-alt1 sisyphus+323470.100.1.1 1687422469 installed <13>Jul 13 09:04:02 rpmi: perl-HTML-Parser-3.82-alt1 sisyphus+343116.100.1.3 1710883258 installed <13>Jul 13 09:04:02 rpmi: perl-WWW-RobotRules-6.02-alt1 1329756211 installed <13>Jul 13 09:04:02 rpmi: perl-Encode-Locale-1.05-alt1 1444608613 installed <13>Jul 13 09:04:02 rpmi: perl-IO-HTML-1.004-alt1 sisyphus+258983.100.1.1 1601542619 installed <13>Jul 13 09:04:02 rpmi: perl-HTTP-Message-6.45-alt1 sisyphus+330728.100.1.1 1696162276 installed <13>Jul 13 09:04:02 rpmi: perl-HTTP-Negotiate-6.01-alt1 1329760563 installed <13>Jul 13 09:04:02 rpmi: perl-libwww-6.77-alt1 sisyphus+343120.100.1.2 1710884405 installed <13>Jul 13 09:04:02 rpmi: perl-XML-LibXML-2.0210-alt7 sisyphus+352564.100.1.2 1720649585 installed <13>Jul 13 09:04:02 rpmi: perl-XML-SAX-1.02-alt1 sisyphus+232322.100.1.1 1560758406 installed <13>Jul 13 09:04:02 rpmi: perl-XML-Simple-2.25-alt2 sisyphus+257498.100.1.1 1599324034 installed <13>Jul 13 09:04:02 rpmi: icon-naming-utils-0.8.90-alt1 sisyphus+276851.100.1.1 1625243947 installed <13>Jul 13 09:04:02 rpmi: icon-theme-adwaita-46.2-alt1 sisyphus+349552.100.1.1 1716810798 installed <13>Jul 13 09:04:02 rpmi: perl-XML-Parser-2.47-alt1 sisyphus+337612.100.1.1 1704201438 installed <13>Jul 13 09:04:02 rpmi: usbids-20240206-alt1 sisyphus+339943.100.1.1 1707270512 installed <13>Jul 13 09:04:02 rpmi: pciids-20240627-alt1 sisyphus+351710.100.1.1 1719555191 installed <13>Jul 13 09:04:03 rpmi: hwdata-0.374-alt1 sisyphus+329322.100.1.1 1694450297 installed <13>Jul 13 09:04:03 rpmi: gtk+3-themes-incompatible-3.20-alt3 1461944560 installed <13>Jul 13 09:04:03 rpmi: libffi-devel-1:3.4.6-alt1 sisyphus+341904.100.1.1 1709474536 installed <13>Jul 13 09:04:03 rpmi: python3-module-zipp-3.19.2-alt1 sisyphus+350389.100.2.1 1717603729 installed <13>Jul 13 09:04:03 rpmi: python3-module-importlib-metadata-8.0.0-alt1 sisyphus+351597.100.2.1 1719487580 installed <13>Jul 13 09:04:03 rpmi: python3-module-markdown-3.6-alt1 sisyphus+342748.100.1.1 1710451241 installed <13>Jul 13 09:04:03 rpmi: python3-module-polib-1.1.1-alt1 sisyphus+282657.100.1.1 1628954165 installed <13>Jul 13 09:04:03 rpmi: python3-module-click-8.1.7-alt1 sisyphus+327424.100.2.1 1695395098 installed <13>Jul 13 09:04:03 rpmi: python3-module-chameleon.core-4.5.4-alt1 sisyphus+348413.100.1.1 1716027273 installed <13>Jul 13 09:04:03 rpmi: python3-module-lingua-4.15.0-alt3 sisyphus+339340.100.1.1 1706573397 installed <13>Jul 13 09:04:03 rpmi: python3-module-babel-1:2.14.0-alt1.1 sisyphus+342546.1400.3.1 1710867888 installed <13>Jul 13 09:04:03 rpmi: python3-module-markupsafe-1:2.1.5-alt1 sisyphus+339663.100.1.1 1706899589 installed <13>Jul 13 09:04:04 rpmi: python3-module-pycparser-2.21-alt1.1 sisyphus+309935.7300.4.1 1668527005 installed <13>Jul 13 09:04:04 rpmi: python3-module-cffi-1.16.0-alt1 sisyphus+333513.10400.71.1 1704540321 installed <13>Jul 13 09:04:04 rpmi: python3-module-cryptography-42.0.5-alt1 sisyphus+341498.100.1.1 1709027854 installed <13>Jul 13 09:04:04 rpmi: python3-module-beaker-1.12.1-alt1 sisyphus+319143.100.1.1 1682256768 installed <13>Jul 13 09:04:04 rpmi: python3-module-mako-1.3.5-alt1 sisyphus+348066.100.1.1 1715708011 installed <13>Jul 13 09:04:04 rpmi: libpython3-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Jul 13 09:04:04 rpmi: libncurses6-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>Jul 13 09:04:04 rpmi: libtinfo-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>Jul 13 09:04:04 rpmi: libncurses-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>Jul 13 09:04:05 rpmi: python3-dev-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Jul 13 09:04:05 rpmi: python3-module-setuptools-1:70.3.0-alt1 sisyphus+352532.100.2.1 1720689196 installed <13>Jul 13 09:04:05 rpmi: gcc-c++-common-1.4.28-alt1 sisyphus+348678.100.1.1 1716396142 installed <13>Jul 13 09:04:05 rpmi: libstdc++13-devel-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Jul 13 09:04:06 rpmi: gcc13-c++-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>Jul 13 09:04:06 rpmi: python3-module-packaging-24.1-alt1 sisyphus+350717.100.2.1 1718268656 installed <13>Jul 13 09:04:06 rpmi: libdevmapper-1.02.198-alt1 sisyphus+349594.200.3.1 1717417861 installed <13>Jul 13 09:04:06 rpmi: mount-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Jul 13 09:04:06 rpmi: losetup-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Jul 13 09:04:06 rpmi: lsblk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Jul 13 09:04:06 rpmi: dmsetup-1.02.198-alt1 sisyphus+349594.200.3.1 1717417861 installed <86>Jul 13 09:04:06 groupadd[2601340]: group added to /etc/group: name=tape, GID=999 <86>Jul 13 09:04:06 groupadd[2601340]: group added to /etc/gshadow: name=tape <86>Jul 13 09:04:06 groupadd[2601340]: new group: name=tape, GID=999 <86>Jul 13 09:04:06 groupadd[2601385]: group added to /etc/group: name=dialout, GID=998 <86>Jul 13 09:04:06 groupadd[2601385]: group added to /etc/gshadow: name=dialout <86>Jul 13 09:04:06 groupadd[2601385]: new group: name=dialout, GID=998 <86>Jul 13 09:04:06 groupadd[2601425]: group added to /etc/group: name=input, GID=997 <86>Jul 13 09:04:06 groupadd[2601425]: group added to /etc/gshadow: name=input <86>Jul 13 09:04:06 groupadd[2601425]: new group: name=input, GID=997 <86>Jul 13 09:04:06 groupadd[2601461]: group added to /etc/group: name=video, GID=996 <86>Jul 13 09:04:06 groupadd[2601461]: group added to /etc/gshadow: name=video <86>Jul 13 09:04:06 groupadd[2601461]: new group: name=video, GID=996 <86>Jul 13 09:04:06 groupadd[2601492]: group added to /etc/group: name=render, GID=995 <86>Jul 13 09:04:06 groupadd[2601492]: group added to /etc/gshadow: name=render <86>Jul 13 09:04:06 groupadd[2601492]: new group: name=render, GID=995 <86>Jul 13 09:04:06 groupadd[2601514]: group added to /etc/group: name=sgx, GID=994 <86>Jul 13 09:04:06 groupadd[2601514]: group added to /etc/gshadow: name=sgx <86>Jul 13 09:04:06 groupadd[2601514]: new group: name=sgx, GID=994 <13>Jul 13 09:04:06 rpmi: udev-1:255.9-alt1 sisyphus+352502.300.4.3 1720636282 installed <13>Jul 13 09:04:07 rpmi: dconf-profile-0.1-alt1 sisyphus+325633.340.3.1 1690415358 installed <13>Jul 13 09:04:07 rpmi: boost-python-headers-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_context1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_fiber1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_stacktrace1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_nowide1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_url1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_test1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_serialization1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_random1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_iostreams1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_json1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_regex1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_graph1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_date_time1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:07 rpmi: libboost_container1.85.0-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:09 rpmi: boost-devel-headers-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Jul 13 09:04:09 rpmi: boost-devel-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:09 rpmi: systemd-modules-common-1:255.9-alt1 sisyphus+352502.300.4.3 1720636243 installed <13>Jul 13 09:04:09 rpmi: systemd-sysctl-common-1:255.9-alt1 sisyphus+352502.300.4.3 1720636282 installed <13>Jul 13 09:04:09 rpmi: systemd-tmpfiles-common-1:255.9-alt1 sisyphus+352502.300.4.3 1720636243 installed <13>Jul 13 09:04:09 rpmi: systemd-utils-filetriggers-1:255.9-alt1 sisyphus+352502.300.4.3 1720636243 installed <13>Jul 13 09:04:09 rpmi: libfdisk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>Jul 13 09:04:09 rpmi: systemd-utils-standalone-1:255.9-alt1 sisyphus+352502.300.4.3 1720636282 installed <13>Jul 13 09:04:09 rpmi: libgc-8.2.6-alt1 sisyphus+340965.100.1.1 1708275751 installed <13>Jul 13 09:04:09 rpmi: libmaa-1.5.1-alt1 sisyphus+349905.100.1.1 1717010548 installed <13>Jul 13 09:04:09 rpmi: dict-1:1.13.1-alt2 sisyphus+340952.100.1.1 1708270449 installed <13>Jul 13 09:04:09 rpmi: w3m-0.5.3-alt4.git20200502 sisyphus+328124.5000.1.1 1693253320 installed <13>Jul 13 09:04:09 rpmi: sgml-common-0.6.3-alt15 sisyphus+276099.100.1.1 1624817971 installed <13>Jul 13 09:04:09 rpmi: docbook-dtds-4.5-alt1 sisyphus+276837.100.1.1 1625242123 installed <13>Jul 13 09:04:10 rpmi: docbook-style-xsl-1.79.1-alt4 sisyphus+232871.100.1.1 1561238010 installed <13>Jul 13 09:04:10 rpmi: libxslt-1.1.39-alt1 sisyphus+349406.100.1.1 1716751808 installed <13>Jul 13 09:04:10 rpmi: xsltproc-1.1.39-alt1 sisyphus+349406.100.1.1 1716751808 installed <13>Jul 13 09:04:10 rpmi: asciidoc-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>Jul 13 09:04:10 rpmi: libImageMagick7-common-7.1.1.34-alt1 sisyphus+351738.100.1.1 1719575148 installed <13>Jul 13 09:04:10 rpmi: libwmflite-0.2.8.4-alt13 sisyphus+275127.100.1.1 1624406848 installed <13>Jul 13 09:04:10 rpmi: liblqr-0.4.2-alt1 sisyphus+276247.100.1.2 1624927462 installed <13>Jul 13 09:04:10 rpmi: highway-libs-1.2.0-alt1 sisyphus+350172.100.1.1 1717269905 installed <13>Jul 13 09:04:10 rpmi: libjbig2.1-2.1-alt2 sisyphus+326386.40.6.1 1691148232 installed <13>Jul 13 09:04:10 rpmi: djvu-common-3.5.28-alt2 sisyphus+346137.200.2.1 1716299621 installed <13>Jul 13 09:04:10 rpmi: libdjvu-3.5.28-alt2 sisyphus+346137.200.2.1 1716299623 installed <13>Jul 13 09:04:10 rpmi: libdav1d_7-1.4.3-alt1 sisyphus+351889.100.1.1 1719823611 installed <13>Jul 13 09:04:10 rpmi: libgts-0.7.6-alt2.drc20130205.1 sisyphus+346279.200.2.1 1716435911 installed <13>Jul 13 09:04:10 rpmi: libpaper2-2:2.1.3-alt1 sisyphus+340967.100.1.1 1708276734 installed <13>Jul 13 09:04:10 rpmi: liblmdb-0.9.32-alt1 sisyphus+342426.100.1.1 1710124284 installed <13>Jul 13 09:04:10 rpmi: libkeyutils-1.6.3-alt1 sisyphus+346336.200.2.2 1716472658 installed <86>Jul 13 09:04:10 groupadd[2611805]: group added to /etc/group: name=_keytab, GID=993 <86>Jul 13 09:04:10 groupadd[2611805]: group added to /etc/gshadow: name=_keytab <86>Jul 13 09:04:10 groupadd[2611805]: new group: name=_keytab, GID=993 <13>Jul 13 09:04:10 rpmi: libkrb5-1.21.3-alt2 sisyphus+351857.100.1.1 1719735219 installed <86>Jul 13 09:04:10 groupadd[2611991]: group added to /etc/group: name=sasl, GID=992 <86>Jul 13 09:04:10 groupadd[2611991]: group added to /etc/gshadow: name=sasl <86>Jul 13 09:04:10 groupadd[2611991]: new group: name=sasl, GID=992 <13>Jul 13 09:04:10 rpmi: libsasl2-3-2.1.28-alt2 sisyphus+343335.100.1.1 1711112524 installed <13>Jul 13 09:04:10 rpmi: libldap2-2.6.8-alt1 sisyphus+351621.100.1.1 1719420471 installed <13>Jul 13 09:04:10 rpmi: libkrb5-ldap-1.21.3-alt2 sisyphus+351857.100.1.1 1719735219 installed <13>Jul 13 09:04:10 rpmi: libkrb5-devel-1.21.3-alt2 sisyphus+351857.100.1.1 1719735219 installed <13>Jul 13 09:04:10 rpmi: libtirpc-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Jul 13 09:04:10 rpmi: liblz4-1:1.9.4-alt1 sisyphus+309416.100.1.1 1667413000 installed <13>Jul 13 09:04:10 rpmi: libsystemd-1:255.9-alt1 sisyphus+352502.300.4.3 1720636282 installed <13>Jul 13 09:04:10 rpmi: libdbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>Jul 13 09:04:10 rpmi: libavahi-0.8-alt4 sisyphus+344258.100.1.1 1712133862 installed <13>Jul 13 09:04:10 rpmi: libcups-2.4.10-alt1 sisyphus+351609.100.2.1 1719561373 installed <13>Jul 13 09:04:10 rpmi: dbus-tools-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <86>Jul 13 09:04:10 groupadd[2612214]: group added to /etc/group: name=messagebus, GID=991 <86>Jul 13 09:04:10 groupadd[2612214]: group added to /etc/gshadow: name=messagebus <86>Jul 13 09:04:10 groupadd[2612214]: new group: name=messagebus, GID=991 <86>Jul 13 09:04:10 useradd[2612234]: new user: name=messagebus, UID=999, GID=991, home=/run/dbus, shell=/dev/null, from=none <13>Jul 13 09:04:10 rpmi: dbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>Jul 13 09:04:10 rpmi: icon-theme-hicolor-0.18-alt1 sisyphus+349610.100.1.1 1716831669 installed <13>Jul 13 09:04:10 rpmi: libgtk+2-locales-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Jul 13 09:04:10 rpmi: libnuma-2.0.14-alt2 sisyphus+278485.100.1.1 1626104243 installed <13>Jul 13 09:04:10 rpmi: libx265-199-3.5-alt1.1 sisyphus+277560.100.1.1 1625696944 installed <13>Jul 13 09:04:10 rpmi: libdeflate-1.20-alt1 sisyphus+343488.100.1.1 1711323986 installed <13>Jul 13 09:04:10 rpmi: libtiff5-4.4.0-alt4 sisyphus+322581.100.1.2 1686180093 installed <13>Jul 13 09:04:11 rpmi: libgs-10.01.1-alt2 sisyphus+346236.200.2.1 1716410957 installed <13>Jul 13 09:04:11 rpmi: libgdk-pixbuf-locales-2.42.12-alt1 sisyphus+348142.100.1.1 1715791856 installed <13>Jul 13 09:04:11 rpmi: libde265-1.0.15-alt1 sisyphus+337190.100.1.1 1703502097 installed <13>Jul 13 09:04:12 rpmi: libaom3-3.5.0-alt2 sisyphus+335780.100.1.1 1701761523 installed <13>Jul 13 09:04:12 rpmi: libdatrie-0.2.13-alt1_7 sisyphus+328221.100.1.1 1693336967 installed <13>Jul 13 09:04:12 rpmi: libthai-0.1.29-alt1_6 sisyphus+328230.100.1.2 1693348044 installed <13>Jul 13 09:04:12 rpmi: desktop-file-utils-0.26-alt6 sisyphus+331944.100.1.3 1697550035 installed <13>Jul 13 09:04:12 rpmi: shared-mime-info-2.4-alt1 sisyphus+334259.100.1.1 1699787317 installed <13>Jul 13 09:04:12 rpmi: gsettings-desktop-schemas-data-46.0-alt1 sisyphus+343025.100.4.2 1710847127 installed <13>Jul 13 09:04:12 rpmi: libgio-2.80.4-alt1 sisyphus+352441.100.1.1 1720496649 installed <13>Jul 13 09:04:12 rpmi: gsettings-desktop-schemas-46.0-alt1 sisyphus+343025.100.4.2 1710847126 installed <13>Jul 13 09:04:12 rpmi: glib2-devel-2.80.4-alt1 sisyphus+352441.100.1.1 1720496649 installed <13>Jul 13 09:04:12 rpmi: libgdk-pixbuf-2.42.12-alt1 sisyphus+348142.100.1.1 1715791858 installed <13>Jul 13 09:04:12 rpmi: libgio-devel-2.80.4-alt1 sisyphus+352441.100.1.1 1720496649 installed <13>Jul 13 09:04:12 rpmi: libgdk-pixbuf-devel-2.42.12-alt1 sisyphus+348142.100.1.1 1715791858 installed <13>Jul 13 09:04:12 rpmi: libatk-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Jul 13 09:04:12 rpmi: libheif-1.17.6-alt1 sisyphus+337190.200.1.1 1703502143 installed <13>Jul 13 09:04:12 rpmi: gtk4-update-icon-cache-4.14.4-alt1 sisyphus+347397.300.1.1 1714734176 installed <13>Jul 13 09:04:12 rpmi: libgdk-pixbuf-gir-2.42.12-alt1 sisyphus+348142.100.1.1 1715791858 installed <13>Jul 13 09:04:12 rpmi: libgdk-pixbuf-gir-devel-2.42.12-alt1 sisyphus+348142.100.1.1 1715791856 installed <13>Jul 13 09:04:12 rpmi: libatk-gir-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>Jul 13 09:04:12 rpmi: libgirepository1.0-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Jul 13 09:04:12 rpmi: gobject-introspection-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>Jul 13 09:04:12 rpmi: libdconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Jul 13 09:04:12 rpmi: dconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Jul 13 09:04:12 rpmi: libgtk+3-schemas-3.24.43-alt1 sisyphus+352627.100.1.1 1720700731 installed <13>Jul 13 09:04:12 rpmi: libjson-glib-1.8.0-alt1 sisyphus+325066.600.6.2 1695204016 installed <13>Jul 13 09:04:12 rpmi: libgusb-0.4.9-alt1 sisyphus+345693.100.1.1 1713857462 installed <13>Jul 13 09:04:12 rpmi: libcolord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039037 installed <13>Jul 13 09:04:12 rpmi: libpolkit-124-alt3 sisyphus+351454.100.1.1 1719236631 installed <86>Jul 13 09:04:12 groupadd[2616881]: group added to /etc/group: name=colord, GID=990 <86>Jul 13 09:04:12 groupadd[2616881]: group added to /etc/gshadow: name=colord <86>Jul 13 09:04:12 groupadd[2616881]: new group: name=colord, GID=990 <86>Jul 13 09:04:12 useradd[2616903]: new user: name=colord, UID=998, GID=990, home=/var/colord, shell=/dev/null, from=none <13>Jul 13 09:04:12 rpmi: colord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039037 installed <13>Jul 13 09:04:12 rpmi: libpixman-3:0.43.4-alt2 sisyphus+344164.100.1.1 1711987947 installed <13>Jul 13 09:04:12 rpmi: libX11-locales-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440719 installed <13>Jul 13 09:04:12 rpmi: libXdmcp-1.1.5-alt1 sisyphus+343583.700.1.1 1711441073 installed <13>Jul 13 09:04:12 rpmi: libxcb-1.17.0-alt1 sisyphus+345308.200.1.1 1713342009 installed <13>Jul 13 09:04:12 rpmi: libX11-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440722 installed <13>Jul 13 09:04:12 rpmi: libXext-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441114 installed <13>Jul 13 09:04:12 rpmi: libXrender-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Jul 13 09:04:12 rpmi: libcairo-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Jul 13 09:04:12 rpmi: libcairo-gobject-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Jul 13 09:04:12 rpmi: libXt-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Jul 13 09:04:12 rpmi: libXfixes-6.0.1-alt1 sisyphus+331490.300.1.1 1697023235 installed <13>Jul 13 09:04:12 rpmi: libXft-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Jul 13 09:04:12 rpmi: libpango-1.54.0-alt1 sisyphus+350796.200.1.1 1718041404 installed <13>Jul 13 09:04:12 rpmi: libXi-1.8-alt1 sisyphus+285490.200.1.1 1632124180 installed <13>Jul 13 09:04:12 rpmi: libXinerama-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Jul 13 09:04:12 rpmi: libat-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Jul 13 09:04:13 rpmi: librsvg-1:2.58.91-alt1 sisyphus+345985.100.1.1 1714236707 installed <13>Jul 13 09:04:13 rpmi: libpango-gir-1.54.0-alt1 sisyphus+350796.200.1.1 1718041404 installed <13>Jul 13 09:04:13 rpmi: libtk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Jul 13 09:04:13 rpmi: tk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Jul 13 09:04:13 rpmi: libXcursor-1.2.2-alt1 sisyphus+343583.600.1.1 1711441036 installed <13>Jul 13 09:04:13 rpmi: libXpm-3.5.17-alt1 sisyphus+330921.100.1.1 1696400258 installed <13>Jul 13 09:04:13 rpmi: libXmu-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441186 installed <13>Jul 13 09:04:13 rpmi: libXrandr-1.5.4-alt1 sisyphus+330992.100.1.1 1696485401 installed <13>Jul 13 09:04:13 rpmi: libXcomposite-0.4.6-alt1 sisyphus+311188.200.1.1 1670233684 installed <13>Jul 13 09:04:13 rpmi: libXdamage-1.1.6-alt1 sisyphus+311188.300.1.1 1670233713 installed <13>Jul 13 09:04:13 rpmi: libgtk+2-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Jul 13 09:04:14 rpmi: libxcb-devel-1.17.0-alt1 sisyphus+345308.200.1.1 1713342009 installed <13>Jul 13 09:04:15 rpmi: libX11-devel-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440722 installed <13>Jul 13 09:04:15 rpmi: libXrender-devel-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Jul 13 09:04:15 rpmi: libXt-devel-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Jul 13 09:04:15 rpmi: libXmu-devel-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441186 installed <13>Jul 13 09:04:15 rpmi: libXext-devel-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441114 installed <13>Jul 13 09:04:15 rpmi: libXaw-1.0.16-alt1 sisyphus+343583.400.1.1 1711440837 installed <13>Jul 13 09:04:15 rpmi: libgd3-2.3.3-alt2 sisyphus+346221.200.2.1 1716402081 installed <13>Jul 13 09:04:15 rpmi: tcl-tix-8.4.3-alt4 sisyphus+277292.300.2.1 1625442551 installed <13>Jul 13 09:04:15 rpmi: at-spi2-atk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Jul 13 09:04:15 rpmi: liblasi-1.1.3-alt3 sisyphus+286812.100.2.1 1633968134 installed <13>Jul 13 09:04:15 rpmi: libgraphviz-11.0.0-alt2 sisyphus+347657.100.1.1 1715096097 installed <13>Jul 13 09:04:15 rpmi: libharfbuzz-cairo-9.0.0-alt1 sisyphus+351755.100.1.1 1719584143 installed <13>Jul 13 09:04:15 rpmi: fontconfig-devel-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Jul 13 09:04:15 rpmi: libfreetype-devel-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Jul 13 09:04:15 rpmi: libcairo-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Jul 13 09:04:15 rpmi: libharfbuzz-devel-9.0.0-alt1 sisyphus+351755.100.1.1 1719584143 installed <13>Jul 13 09:04:15 rpmi: libharfbuzz-gir-devel-9.0.0-alt1 sisyphus+351755.100.1.1 1719584130 installed <13>Jul 13 09:04:15 rpmi: libpango-gir-devel-1.54.0-alt1 sisyphus+350796.200.1.1 1718041393 installed <13>Jul 13 09:04:15 rpmi: libcairo-gobject-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Jul 13 09:04:15 rpmi: libXft-devel-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Jul 13 09:04:15 rpmi: libpango-devel-1.54.0-alt1 sisyphus+350796.200.1.1 1718041404 installed <13>Jul 13 09:04:15 rpmi: libXtst-1.2.4-alt1 sisyphus+308663.1300.1.1 1666168504 installed <13>Jul 13 09:04:15 rpmi: libXxf86vm-1.1.5-alt1 sisyphus+308663.1400.1.1 1666168534 installed <13>Jul 13 09:04:15 rpmi: libGLX-mesa-4:24.1.3-alt1 sisyphus+352142.100.1.1 1720089951 installed <13>Jul 13 09:04:15 rpmi: libGLX-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Jul 13 09:04:15 rpmi: libGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Jul 13 09:04:15 rpmi: libGLU-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Jul 13 09:04:15 rpmi: dbus-tools-gui-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>Jul 13 09:04:15 rpmi: xprop-1.2.5-alt1 sisyphus+279025.100.1.1 1626354193 installed <13>Jul 13 09:04:15 rpmi: at-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>Jul 13 09:04:16 rpmi: libgtk+3-3.24.43-alt1 sisyphus+352627.100.1.1 1720700753 installed <13>Jul 13 09:04:16 rpmi: libgtk+3-devel-3.24.43-alt1 sisyphus+352627.100.1.1 1720700753 installed <13>Jul 13 09:04:16 rpmi: libgtk+3-gir-3.24.43-alt1 sisyphus+352627.100.1.1 1720700753 installed <13>Jul 13 09:04:16 rpmi: libgbm-4:24.1.3-alt1 sisyphus+352142.100.1.1 1720089951 installed <13>Jul 13 09:04:16 rpmi: libEGL-mesa-4:24.1.3-alt1 sisyphus+352142.100.1.1 1720089951 installed <13>Jul 13 09:04:16 rpmi: libEGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Jul 13 09:04:16 rpmi: libglvnd-devel-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Jul 13 09:04:16 rpmi: libopenexrcore30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Jul 13 09:04:16 rpmi: libiex30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Jul 13 09:04:16 rpmi: libilmthread30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Jul 13 09:04:16 rpmi: libimath29-3.1.6-alt4 sisyphus+347973.100.1.1 1715620457 installed <13>Jul 13 09:04:16 rpmi: libopenexr30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Jul 13 09:04:16 rpmi: libjxl-pixbuf-loader-0.10.3-alt1 sisyphus+351709.100.1.1 1719512975 installed <13>Jul 13 09:04:16 rpmi: libjxl0.10-0.10.3-alt1 sisyphus+351709.100.1.1 1719512975 installed <13>Jul 13 09:04:16 rpmi: libImageMagick7.10-7.1.1.34-alt1 sisyphus+351738.100.1.1 1719575148 installed <13>Jul 13 09:04:16 rpmi: ImageMagick-tools-7.1.1.34-alt1 sisyphus+351738.100.1.1 1719575148 installed <13>Jul 13 09:04:16 rpmi: libGL-devel-4:24.1.3-alt1 sisyphus+352142.100.1.1 1720089951 installed <13>Jul 13 09:04:16 rpmi: libGLU-devel-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Jul 13 09:04:16 rpmi: libepoxy-devel-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Jul 13 09:04:16 rpmi: libgtk+3-gir-devel-3.24.43-alt1 sisyphus+352627.100.1.1 1720700731 installed <13>Jul 13 09:04:16 rpmi: libgtk+2-devel-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Jul 13 09:04:16 rpmi: python3-modules-tkinter-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>Jul 13 09:04:16 rpmi: libXaw-devel-1.0.16-alt1 sisyphus+343583.400.1.1 1711440837 installed <13>Jul 13 09:04:16 rpmi: libXinerama-devel-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Jul 13 09:04:16 rpmi: tk-devel-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Jul 13 09:04:16 rpmi: bwidget-1.9.1-alt1 1314273552 installed <13>Jul 13 09:04:16 rpmi: python3-module-pygobject3-3.48.2-alt1.1 sisyphus+351943.100.1.1 1719858054 installed <13>Jul 13 09:04:16 rpmi: tcl-img-1.4.14-alt1 sisyphus+316986.300.2.1 1679243176 installed <13>Jul 13 09:04:16 rpmi: libtirpc-devel-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Jul 13 09:04:16 rpmi: asciidoc-a2x-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>Jul 13 09:04:16 rpmi: boost-lockfree-devel-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654829 installed <13>Jul 13 09:04:16 rpmi: boost-python3-devel-1:1.85.0-alt3 sisyphus+350371.100.2.1 1717654946 installed <13>Jul 13 09:04:16 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Jul 13 09:04:16 rpmi: intltool-0.51.0-alt2 1513698802 installed <13>Jul 13 09:04:16 rpmi: man-db-2.12.0-alt1 sisyphus+336930.2100.1.1 1703107336 installed <13>Jul 13 09:04:16 rpmi: libmodbus-devel-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Jul 13 09:04:16 rpmi: libusb-devel-1.0.27-alt1 sisyphus+347412.100.1.1 1714739652 installed <13>Jul 13 09:04:17 rpmi: tclx-1:8.4.4-alt1 sisyphus+251935.100.1.1 1589842635 installed <13>Jul 13 09:04:17 rpmi: xorg-cf-files-1.0.7-alt3 sisyphus+299066.100.1.1 1650986802 installed <13>Jul 13 09:04:17 rpmi: python3-module-yapps2-2.2.0-alt2 sisyphus+281199.100.1.1 1627462968 installed <13>Jul 13 09:04:17 rpmi: libudev-devel-1:255.9-alt1 sisyphus+352502.300.4.3 1720636282 installed <13>Jul 13 09:04:17 rpmi: libreadline-devel-8.2.10-alt1 sisyphus+338911.100.4.1 1706717069 installed <13>Jul 13 09:04:17 rpmi: dos2unix-7.5.2-alt1 sisyphus+339342.100.1.1 1706585516 installed Building target platforms: i586 Building for target i586 Wrote: /usr/src/in/nosrpm/linuxcnc-2.9.2-alt4.20240203.nosrc.rpm (w1.gzdio) Installing linuxcnc-2.9.2-alt4.20240203.src.rpm Building target platforms: i586 Building for target i586 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.22535 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf linuxcnc-2.9.2 + echo 'Source #0 (linuxcnc-2.9.2.tar):' Source #0 (linuxcnc-2.9.2.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/linuxcnc-2.9.2.tar + cd linuxcnc-2.9.2 + /bin/chmod -c -Rf u+rwX,go-w . + echo 'Patch #0 (linuxcnc-2.9.2-alt4.20240203.patch):' Patch #0 (linuxcnc-2.9.2-alt4.20240203.patch): + /usr/bin/patch -p1 patching file .gear/rules patching file .gear/tags/list patching file .gear/upstream/remotes patching file lib/python/qtvcp/lib/virtual_keyboard.py patching file linuxcnc-documentation.desktop patching file linuxcnc.spec patching file scripts/linuxcnc_info.in patching file share/qtvcp/panels/test_panel/test_panel_handler.py patching file src/Makefile patching file src/Makefile.inc.in patching file src/configure.ac patching file src/m4/ax_boost_base.m4 patching file src/m4/ax_python.m4 + sed -i 's|lib/tcltk/linuxcnc|lib/tcl/linuxcnc|' lib/python/rs274/options.py + sed -i 's|INCLUDES := .|INCLUDES := . /usr/include/tirpc|' src/Makefile + sed -i 's|LDFLAGS := |LDFLAGS := -ltirpc |' src/Makefile + sed 's/ -o root//g' -i src/Makefile + find . -name '*.py' -exec dos2unix '{}' ';' dos2unix: converting file ./tests/trajectory-planner/circular-arcs/test-reverse.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/run_all_tests.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/machine_setup.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/linuxcnc_control.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/m61/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-with-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-no-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/tlo/test-ui.py to Unix format... dos2unix: converting file ./tests/statbuffer-g5x-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/startup-state/test-ui.py to Unix format... dos2unix: converting file ./tests/single-step/test-ui.py to Unix format... dos2unix: converting file ./tests/rs274ngc-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/subs.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/remap.py to Unix format... dos2unix: converting file ./tests/remap/spindle/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/spindle/remap.py to Unix format... dos2unix: converting file ./tests/remap/sequencing/permute.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/remap.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/remap.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/subs.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/namedparams.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/subs.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/oword.py to Unix format... dos2unix: converting file ./tests/remap/introspect/subs.py to Unix format... dos2unix: converting file ./tests/remap/introspect/oword.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/remap.py to Unix format... dos2unix: converting file ./tests/mqtt/display.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-joint/test-ui.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-axis/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/startup-gcode-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/mountaindew/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/basic/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/toplevel.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/remap.py to Unix format... dos2unix: converting file ./tests/mdi-queue-length/test-ui.py to Unix format... dos2unix: converting file ./tests/lathe/test-ui.py to Unix format... dos2unix: converting file ./tests/io-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/subs.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/oword.py to Unix format... dos2unix: converting file ./tests/interp/subroutine-return/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/python/error/canon.py to Unix format... dos2unix: converting file ./tests/interp/python-self/subs.py to Unix format... dos2unix: converting file ./tests/interp/python-self/oword.py to Unix format... dos2unix: converting file ./tests/interp/pymove/subs.py to Unix format... dos2unix: converting file ./tests/interp/pymove/oword.py to Unix format... dos2unix: converting file ./tests/interp/oword-mdi-sub-update/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/mdi-oword-m66/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/m98m99/12-M99-endless-main-program/test-ui.py to Unix format... dos2unix: converting file ./tests/hm2-idrom/check-dmesg.py to Unix format... dos2unix: converting file ./tests/hard-limits/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/mdi/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/jogging/test-ui.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_writer.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_test.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_reader.py to Unix format... dos2unix: converting file ./tests/halmodule.0/test.py to Unix format... dos2unix: converting file ./tests/hal-link-unlink/hallink.py to Unix format... dos2unix: converting file ./tests/ccomp/early-exit/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/stop-button-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/on_abort_command-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/g64/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/feed-rate/test-ui.py to Unix format... dos2unix: converting file ./src/po/fixpaths.py to Unix format... dos2unix: converting file ./src/modsilent.py to Unix format... dos2unix: converting file ./src/hal/utils/elbpcom.py to Unix format... dos2unix: converting file ./src/hal/user_comps/z_level_compensation.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzbc-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzac-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzab-tdr-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/scaragui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/rotarydelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/pumagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/puma560gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/millturngui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/melfagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/max5gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/maho600gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/lineardelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hexagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hbmgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/5axisgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/sim-torch.py to Unix format... dos2unix: converting file ./src/hal/user_comps/scorbot-er-3.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pyvcp.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pmx485.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mqtt-publisher.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mitsub_vfd.py to Unix format... dos2unix: converting file ./src/hal/user_comps/hal_input.py to Unix format... dos2unix: converting file ./src/hal/user_comps/gladevcp.py to Unix format... dos2unix: converting file ./src/hal/drivers/rbf2h.py to Unix format... dos2unix: converting file ./src/hal/drivers/mesa-hostmot2/modbus/modcompile.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/touchy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/listing.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/hal_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/filechooser.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/stepconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/import_mach.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtvcp/qtvcp.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac_gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-plasmac2qt.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-materials.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-cfg2prefs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/pmx485-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/pyui.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_validate.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_handler.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/master.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/commands.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/tests.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/private_data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pncconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/mdro/mdro.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/keybindings.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/gscreen.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/qt5_graphics.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/gremlin.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/player.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/notification.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/icon_theme_helper.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/gmoccapy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/getiniinfo.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/dialogs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/tracking-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/teach-in.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/linuxcnctop.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/lintini.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/image-to-gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/haltest.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/debuglevel.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis-remote.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/makeicon.py to Unix format... dos2unix: converting file ./src/emc/ini/update_ini.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/x1mill/x1mill_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/woodpecker/woodpecker_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qttouchy/qttouchy_handler.py to Unix format... dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py. dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py. dos2unix: converting file ./share/qtvcp/screens/qtplasmac/qtplasmac_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtplasmac/languages/qtplasmac.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtlathe/qtlathe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon/qtdragon_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtaxis/qtaxis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc/qt_cnc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/blender/blender_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_scara/vismach_scara_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/versaprobe/versaprobe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/tool_dialog/tool_dialog_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_probe/test_probe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_panel/test_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_led/test_led_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_dial/test_dial_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_button/test_button_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/spindle_belts/spindle_belts_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/sim_panel/sim_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/copy/copy_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/cam_align/cam_align_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/spartan/spartan_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/silverdragon/silverdragon_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/industrial/industrial_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis/gaxis_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/9_axis/9_axis_handler.py to Unix format... dos2unix: converting file ./scripts/torture.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/stdglue.py to Unix format... dos2unix: Skipping symbolic link ./nc_files/remap_lib/python-stdglue/python/stdglue.py. dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/toplevel.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/remap.py to Unix format... dos2unix: converting file ./nc_files/involute.py to Unix format... dos2unix: converting file ./nc_files/holecircle.py to Unix format... dos2unix: converting file ./nc_files/flowsnake.py to Unix format... dos2unix: converting file ./nc_files/filtertest.py to Unix format... dos2unix: converting file ./nc_files/filtertest-gui.py to Unix format... dos2unix: converting file ./lib/python/vismach.py to Unix format... dos2unix: converting file ./lib/python/vcpparse.py to Unix format... dos2unix: converting file ./lib/python/tooldb.py to Unix format... dos2unix: converting file ./lib/python/rs274/options.py to Unix format... dos2unix: converting file ./lib/python/rs274/interpret.py to Unix format... dos2unix: converting file ./lib/python/rs274/glcanon.py to Unix format... dos2unix: converting file ./lib/python/rs274/author.py to Unix format... dos2unix: converting file ./lib/python/rs274/__init__.py to Unix format... dos2unix: converting file ./lib/python/rs274/OpenGLTk.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_baseclass.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/web_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/virtualkeyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/versa_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/touchEntry.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tool_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tab_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/system_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/stylesheeteditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_stacked.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_slider.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_led.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/simple_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/screen_options.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/runFromLine_dialog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_progress.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_gauge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/richtext_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/radio_axis_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/qtvcp_icons.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_subprog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_routines.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/overlay_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/origin_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/offset_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/nurbs_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_touchy.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_history.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/led_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/joypad.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/jog_increments.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/image_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_selectionbox.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_output.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_input.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/geditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_graphics.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/file_manager.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/fake_status.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/entry_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialog_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialogMixin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/detach_tabs.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/container_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/camview_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/calculator.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/basic_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/axis_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/adjustment_bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button_round.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qtvcp_handler.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_tstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_pstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makepins.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makegui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_istat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_action.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/widgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/web_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/virtualkeyboard_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/versa_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/toolbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/tab_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_slider_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/simplewidgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/screenoptions_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_progress_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_gauge_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/qtvcp_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/overlay_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/nurbs_editor_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/joypad_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/jogincrements_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/hal_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/graphics_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/dialog_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/detach_tabs_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/container_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/camview_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/basic_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/actionbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/logger.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/virtual_keyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/writer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/wordcount.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/table.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/find.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/datetime.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/touchoff_subprogram.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/toolbar_actions.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/sys_notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/ripper/gcode_ripper.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/updater.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/tooltips.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/set_offsets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conversational.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_triangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_star.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_slot.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_settings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_sector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_polygon.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_gusset.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_bolt.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_block.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/scara.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/qt_vismach.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/primitives.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/millturn.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/mill_xyz.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_pdf/PDFViewer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/preferences.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/message.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/mdi_text.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/keybindings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcodes.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/facing.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/colored_formatter.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/aux_program_loader.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/auto_height/auto_height.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/audio_player.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/core.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/pyvcp_widgets.py to Unix format... dos2unix: converting file ./lib/python/pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/pyhal.py to Unix format... dos2unix: converting file ./lib/python/propertywindow.py to Unix format... dos2unix: converting file ./lib/python/popupkeyboard.py to Unix format... dos2unix: converting file ./lib/python/plasmac/triangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/star.py to Unix format... dos2unix: converting file ./lib/python/plasmac/slot.py to Unix format... dos2unix: converting file ./lib/python/plasmac/sector.py to Unix format... dos2unix: converting file ./lib/python/plasmac/run_from_line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/rectangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/polygon.py to Unix format... dos2unix: converting file ./lib/python/plasmac/line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/gusset.py to Unix format... dos2unix: converting file ./lib/python/plasmac/ellipse.py to Unix format... dos2unix: converting file ./lib/python/plasmac/circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/bolt_circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/block.py to Unix format... dos2unix: converting file ./lib/python/multifilebuilder.py to Unix format... dos2unix: converting file ./lib/python/linuxcnc_util.py to Unix format... dos2unix: converting file ./lib/python/linux_event.py to Unix format... dos2unix: converting file ./lib/python/hershey.py to Unix format... dos2unix: converting file ./lib/python/hal_glib.py to Unix format... dos2unix: converting file ./lib/python/hal.py to Unix format... dos2unix: converting file ./lib/python/gremlin_view.py to Unix format... dos2unix: converting file ./lib/python/glnav.py to Unix format... dos2unix: converting file ./lib/python/gladevcp_makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/xembed.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/tooledit_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/status_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/state_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/speedcontrol.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/persistence.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/overridewidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetpage_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/led.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/jogwheel.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/iconview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_widgets.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_sourceview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pythonplugin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_meter.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_mdihistory.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_lightbutton.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin_plus.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_graph.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_filechooser.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_dial.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_bar.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_actions.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gtk_action.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gladebuilder.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/drowidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/core.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/combi_dro.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/calculatorwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/bwidget.py to Unix format... dos2unix: converting file ./lib/python/bitfile.py to Unix format... dos2unix: converting file ./docs/src/mkpre.py to Unix format... dos2unix: converting file ./docs/src/links_db_gen.py to Unix format... dos2unix: converting file ./docs/src/links.py to Unix format... dos2unix: converting file ./docs/src/gui/panelui_handler.py to Unix format... dos2unix: converting file ./docs/src/gen_complist.py to Unix format... dos2unix: converting file ./docs/src/checklinks.py to Unix format... dos2unix: converting file ./debian/tests/linuxcnc-test-ui.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/zlevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/woodpecker_/woodpecker_handler.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/numstr.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/compensate.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/touchy/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/qtplasmac/custom_filter.py to Unix format... dos2unix: converting file ./configs/sim/hitcounter.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/signals.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/plasma.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/lathe_configs/lathehandler.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/blockdelete.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/util.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/panelui-demo/panelui_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/plugins.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/embedding.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/fullscreen.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/axis_resize.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/remap.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/axis/gladevcp/test_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/probe.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/meter_scale.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_ran.py. dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_nonran.py. dos2unix: converting file ./configs/sim/axis/db_demo/db.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/functionhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler_persistent.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/simple-callback/simplecallback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/complex/complex.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/colored-label/coloredlabel.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/class-callback/class_callback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/spinbutton.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/sourceview.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/radio.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox_manual_list.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/animated-backdrop/cairodraw.py to Unix format... + sed -i 's/GROUP="plugdev"/GROUP="uucp"/g' debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.47483 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd linuxcnc-2.9.2 + pushd src ~/RPM/BUILD/linuxcnc-2.9.2/src ~/RPM/BUILD/linuxcnc-2.9.2 + ./autogen.sh + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CFLAGS + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CXXFLAGS + FFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FFLAGS + FCFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FCFLAGS + '[' -n '' ']' ++ printf %s '-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' ++ sed -r 's/(^|[[:space:]]+)-[^m][^[:space:]]*//g' + ASFLAGS=' -march=i586 -mtune=generic' + export ASFLAGS + export lt_cv_deplibs_check_method=pass_all + lt_cv_deplibs_check_method=pass_all + readlink -e -- ./configure + xargs -ri dirname -- '{}' + xargs -ri find '{}' -type f '(' -name config.sub -or -name config.guess ')' -printf '%h/\n' + sort -u + xargs -rn1 install -pm755 -- /usr/share/gnu-config/config.sub /usr/share/gnu-config/config.guess + configure_runstatedir_flags= + grep -qF runstatedir=DIR ./configure + configure_runstatedir_flags=--runstatedir=/var/run + ./configure --build=i586-alt-linux --host=i586-alt-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var/lib --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --disable-silent-rules --runstatedir=/var/run --without-included-gettext --enable-non-distributable=yes --with-realtime=uspace configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext checking for i586-alt-linux-c++... no checking for i586-alt-linux-clang++... no checking for c++... c++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether c++ supports C++17 features with -std=gnu++17... yes checking build toplevel... /usr/src/RPM/BUILD/linuxcnc-2.9.2 checking installation prefix... /usr checking for grep... /usr/bin/grep checking for egrep... /usr/bin/egrep checking for pkg-config... /usr/bin/pkg-config checking for i586-alt-linux-gcc... i586-alt-linux-gcc checking whether the compiler supports GNU C... yes checking whether i586-alt-linux-gcc accepts -g... yes checking for i586-alt-linux-gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for rpc/rpc.h... no checking for get_myaddress in -ltirpc... yes checking for rpc/rpc.h... yes checking for rtai-config... none checking for xeno-config... none checking for realtime API(s) to use... uspace checking whether to enable userspace PCI access... yes checking for libudev... yes - version 255 checking for cc version... not specified checking for i586-alt-linux-gcc... (cached) i586-alt-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i586-alt-linux-gcc accepts -g... (cached) yes checking for i586-alt-linux-gcc option to enable C11 features... (cached) none needed checking how to run the C preprocessor... i586-alt-linux-gcc -E checking for usability of linux/hidraw.h... yes checking for usability of rpc/rpc.h... yes checking for libmodbus3... yes - version 3.1.10 checking for libusb-1.0... yes checking for libgpiod... checking for main in -lgpiod... no configure: WARNING: Could not find libgpiod, not building hal_gpio checking for module installation directory... /usr/lib/linuxcnc/modules checking for glib... yes - 2.80.4 checking for GTK 3.22.4 or above... yes - 3.24.43 checking for GTK 2.4.0 or above... yes - 2.24.33 checking for libgnomeprintui-2.2... no -- printing from classicladder will not be possible checking whether make sets $(MAKE)... yes checking for i586-alt-linux-ranlib... no checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for install... /usr/bin/ginstall -c checking for sed... /usr/bin/sed checking for ps... /usr/bin/ps checking for kill... /usr/bin/kill checking for whoami... /usr/bin/whoami checking for awk... /usr/bin/awk checking for pidof... /usr/bin/pidof checking for ipcs... /usr/bin/ipcs checking for fuser... /usr/bin/fuser checking for yapps... no checking for yapps2... /usr/bin/yapps2 checking for mandb... /usr/bin/mandb checking for intltool-extract... /usr/bin/intltool-extract checking for yapps... (cached) /usr/bin/yapps2 checking build system type... i586-alt-linux-gnu checking host system type... i586-alt-linux-gnu checking for boostlib >= (102000)... yes checking for python build information... checking for python3.12... python3.12 checking for main in -lpython3.12... yes results of the Python check: Binary: python3.12 Library: python3.12 Include Dir: /usr/include/python3.12 checking for python3.12... /usr/bin/python3.12 checking for python... (cached) /usr/bin/python3.12 checking for a version of Python >= '2.1.0'... yes checking for the sysconfig Python package... yes checking for Python include path... -I/usr/include/python3.12 checking for Python library path... -L/usr/lib -lpython3.12 checking for Python site-packages path... /usr/lib/python3/site-packages checking for Python platform specific site-packages path... checking python extra libraries... -ldl -lm checking python extra linking flags... -Xlinker -export-dynamic checking consistency of all components of python development environment... yes checking whether the Boost::Python library is available... yes checking whether boost_python is the correct library... no checking whether boost_python312-mt is the correct library... yes checking whether to build documentation... no checking for sys/io.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for semtimedop... yes checking for optreset... no checking for library containing dlopen... none required checking for library containing clock_nanosleep... none required checking for tcl... find: '/usr/lib/chkpwd': Permission denied /usr/lib/tclConfig.sh found checking for tk... /usr/lib/tkConfig.sh found checking whether to check for runtime dependencies... yes checking for BWidget using /usr/bin/tclsh8.6... found checking for BLT using /usr/bin/tclsh8.6... not found checking for tclX using /usr/bin/tclsh8.6... found checking for python pango module... found checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X11/extensions/Xinerama.h... yes checking for XineramaQueryExtension in -lXinerama... yes checking for readline/readline.h... yes checking for readline/history.h... yes Trying readline without -ltermcap checking for readline in -lreadline... yes Trying readline with -ltermcap checking for readline in -lreadline... no Readline does not require -ltermcap checking whether readline license is compatible with GPL-2... no configure: WARNING: The LinuxCNC binary you are building may not be distributable due to a license incompatibility with LinuxCNC (some portions GPL-2 only) and Readline version 6 and greater (GPL-3 or later). configure: WARNING: User requested to enable non-distributable builds. Continuing. checking for locale.h... yes checking for setlocale... yes checking for libintl.h... yes checking for gettext in -lintl... no checking for xgettext... /usr/bin/xgettext checking for msgfmt... /usr/bin/msgfmt checking python version... OK checking match between tk and Tkinter versions... 8.6 checking for site-package location... /usr/lib/python3/site-packages checking for working GLU quadrics... yes checking for Xmu headers... checking for X11/Xmu/Xmu.h... yes configure: creating ./config.status config.status: creating ../scripts/rtapi.conf config.status: creating ../scripts/linuxcnc config.status: creating ../scripts/linuxcnc_info config.status: creating ../scripts/halrun config.status: creating ../scripts/rip-environment config.status: creating ../scripts/haltcl config.status: creating ../scripts/halcmd_twopass config.status: creating ../scripts/realtime config.status: creating ../scripts/runtests config.status: creating ../scripts/linuxcnc_var config.status: creating ../scripts/linuxcnc-checklink config.status: creating Makefile.inc config.status: creating Makefile.modinc config.status: creating ../tcl/linuxcnc.tcl config.status: creating ../lib/python/nf.py config.status: creating ../scripts/linuxcncmkdesktop config.status: creating ../share/applications/linuxcnc-latency.desktop config.status: creating ../share/applications/linuxcnc-latency-histogram.desktop config.status: creating ../share/applications/linuxcnc-pncconf.desktop config.status: creating ../share/applications/linuxcnc-stepconf.desktop config.status: creating ../share/applications/linuxcnc.desktop config.status: creating ../share/desktop-directories/linuxcnc-cnc.directory config.status: creating ../share/desktop-directories/linuxcnc-ref.directory config.status: creating ../share/desktop-directories/linuxcnc-doc.directory config.status: creating ../share/menus/CNC.menu config.status: creating config.h configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext ###################################################################### # LinuxCNC - Enhanced Machine Controller # ###################################################################### # # # LinuxCNC is a software system for computer control of machine # # tools such as milling machines. LinuxCNC is released under the # # GPL. Check out http://www.linuxcnc.org/ for more details. # # # # # # It seems that ./configure completed successfully. # # This means that RT is properly installed # # If things don't work check config.log for errors & warnings # # # # warning: If you already have an installed linuxcnc, this will # # replace an existing installation. If you have installed # # a linuxcnc package, this will damage the package. # # hint: To test a self-built version of linuxcnc without damaging # # the package version, don't specify a --prefix # # # # Next compile by typing # # make # # then install it by typing # # sudo make install # # # # To run the software type # # linuxcnc # # # ###################################################################### + make -j16 make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/115 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating abs.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating abs_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating and2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating anglejog.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating axistest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bin2gray.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating biquad.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bitslice.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bitwise.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bldc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating blend.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating carousel.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating charge_pump.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarke2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarke3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating comp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarkeinv.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating constant.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating corexy_by_hal.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating dbounce.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ddt.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating deadzone.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating demux.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating differential.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating div2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating edge.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating eoffset_per_angle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating estop_latch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating feedcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating filter_kalman.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating flipflop.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gantry.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gearchange.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gray2bin.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating histobins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating homecomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating hypot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ilowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating integ.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating invert.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating joyhandle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating latencybins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating knob2float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit1.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lincurve.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit_axis.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating logic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lut5.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating maj3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating match8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating max31855.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_pktgyro_test.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating message.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating millturn.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating minmax.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating moveoff.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mult2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating multiclick.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating multiswitch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux16.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux4.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating near.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating not.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating offset.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ohmic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating oneshot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating or2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating orient.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating plasmac.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sample_hold.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating scale.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating scaled_s32_sums.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating select8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_axis_hardware.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_home_switch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_matrix_kb.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_parport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating simple_tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sphereprobe.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating steptest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating spindle_monitor.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sum2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating thc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating thcud.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating threadtest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating time.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating timedelay.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating timedelta.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tof.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating toggle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating toggle2nist.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ton.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tristate_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tristate_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating updown.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating userkins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating wcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xor2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xyzab_tdr_kins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xhc_hb04_util.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating serport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_7i65.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_uart.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_float_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_float_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/237 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' sed hal/drivers/mesa_uart.comp -e "1 s/mesa_uart/mesa_uart_test/" > ../tests/halcompile/serial-out-of-tree/mesa_uart_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' sed ../docs/src/hal/rand.comp -e "1 s/rand/rand_test/" > ../tests/halcompile/userspace/rand_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp ../scripts/rtapi.conf ../tests/uspace/spawnv-root/rtapi.conf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_timer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/sem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/shm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_shm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/phantom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/rcs/rcs_exit.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/posemath.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_sem.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/timer.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/memsem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/locmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/rcs/rcs_print.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/physmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/recvn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/sendn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_pm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/shmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_in.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_up.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_aup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_dup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_oi.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/tcp_opts.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/cmd_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_cfg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_xup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nmldiag.cc libnml/nml/nmldiag.cc: In function 'int nml_print_diag_list()': libnml/nml/nmldiag.cc:134:26: warning: the address of 'CMS::BufferName' will never be NULL [-Waddress] 134 | if (NULL != nml->cms->BufferName) { | ^ In file included from libnml/cms/cmsdiag.hh:18, from libnml/nml/nmldiag.hh:18, from libnml/nml/nmldiag.cc:16: libnml/cms/cms.hh:354:10: note: 'CMS::BufferName' declared here 354 | char BufferName[LINELEN]; | ^~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nmlmsg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/stat_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_ulapi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_string.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/linklist/linklist.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cmsdiag.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/tcp_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' :1: SyntaxWarning: invalid escape sequence '\.' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/inifile/inivar.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/tcpmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_parport.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/rtapi_pci.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in config.status: creating ../docs/man/man1/linuxcnc.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/inifile/inifile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/streamer_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/sampler_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/emccalib.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/emccalib.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml" Note: Writing emccalib.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/halstreamer.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/halstreamer.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml" Note: Writing halstreamer.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/mqtt-publisher.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/mqtt-publisher.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml" Note: Writing mqtt-publisher.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/sendkeys.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/sendkeys.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml" Note: Writing sendkeys.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/hy_gt_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/hy_gt_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml" Note: Writing hy_gt_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_mod.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/panelui.c hal/components/panelui.c: In function 'main': hal/components/panelui.c:211:5: warning: 'Py_SetProgramName' is deprecated [-Wdeprecated-declarations] 211 | Py_SetProgramName(wname); | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from hal/components/panelui.c:73: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/svd-ps_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/svd-ps_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml" Note: Writing svd-ps_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_modbus.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_init.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/gs2_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/enum.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/enum.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml" Note: Writing enum.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/svd-ps_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/hy_gt_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/shuttle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man3/hm2_pktuart.3` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man3', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man3/hm2_pktuart.3.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml" Note: Writing hm2_pktuart.3 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/streamer.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/streamer.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml" Note: Writing streamer.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/sendkeys.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/vfs11_vfd/vfs11_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/config.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/xhc-whb04b-6.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/xhc-whb04b-6.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml" Note: Writing xhc-whb04b-6.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/emc_mods.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files_project.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/protocol_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/protocol_modbus_slave.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/serial_linux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/classicladder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/socket_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/classicladder_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/drawing_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/socket_server.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/drawing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/editproperties_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/config_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/vars_names.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halsh.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_completion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-hb04.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_main.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/manager_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script modcompile Copying python script modcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script elbpcom Copying python script elbpcom make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying Modbus template mesa_modbus.c.tmpl make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halrmt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/spy_vars_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_app.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/symbols_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/huanyang-vfd/hy_comm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/vfdb_vfd/vfdb_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/huanyang-vfd/hy_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/miscgtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/meter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_trig.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_horiz.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_commands.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_vert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_disp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/pendant-types.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcargs.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/modal_state.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/canon_position.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcops.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/usb.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/xhc-whb04b6.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/main.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/hal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/sockets.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/shcom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/interpl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/emcIniFile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inihal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inijoint.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/emcmotglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/iniaxis.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inispindle.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/pendant.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_mmap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/initraj.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_common.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_db.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/backtrace.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcrsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/schedrmt.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emclcd.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcsched.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emcsvr.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/halui.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_base.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/usrmotintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emccanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_array.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_arc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emctaskmain.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_check.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_queue.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_execute.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_inverse.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_find.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_internal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_write.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/nurbs_additional_functions.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_cycles.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emctask.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_convert.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_read.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_g7x.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_inspection.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_o_word.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_setup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_python.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_remap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/ugenserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_namedparams.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/canterp/canterp.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/iotask/ioControl.cc emc/iotask/ioControl.cc: In function 'int main(int, char**)': emc/iotask/ioControl.cc:694:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 694 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:695:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 695 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:696:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 696 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion-logger/motion-logger.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/iotask/ioControl_v2.cc emc/iotask/ioControl_v2.cc: In function 'int main(int, char**)': emc/iotask/ioControl_v2.cc:791:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 791 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:792:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 792 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:793:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 793 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling module_helper/module_helper.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/cs/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyparamclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/da/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/de/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/es/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/saicanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/fi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/fr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/hu/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ja/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/driver.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/it/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/dummyemcstat.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/nb/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/pl/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ro/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sk/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ru/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sv/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/cs/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/vi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/da/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/de/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/fr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/es/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/hu/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/it/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/nb/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/pl/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/sk/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyblock.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/sr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/linuxcnc.h ../include/linuxcnc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/emcIniFile.hh ../include/emcIniFile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/vi/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/iniaxis.hh ../include/iniaxis.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inijoint.hh ../include/inijoint.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inispindle.hh ../include/inispindle.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/initraj.hh ../include/initraj.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inihal.hh ../include/inihal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/cubic.h ../include/cubic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/kinematics.h ../include/kinematics.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/switchkins.h ../include/switchkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/genhexkins.h ../include/genhexkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/genserkins.h ../include/genserkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/pentakins.h ../include/pentakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/pumakins.h ../include/pumakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tc.h ../include/tc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tc_types.h ../include/tc_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tcq.h ../include/tcq.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tp.h ../include/tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tp_types.h ../include/tp_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/spherical_arc.h ../include/spherical_arc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/blendmath.h ../include/blendmath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/emcmotcfg.h ../include/emcmotcfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/motion.h ../include/motion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/homing.h ../include/homing.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/simple_tp.h ../include/simple_tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/state_tag.h ../include/state_tag.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/usrmotintf.h ../include/usrmotintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/axis.h ../include/axis.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/canon.hh ../include/canon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/canon_position.hh ../include/canon_position.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emctool.h ../include/emctool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emc.hh ../include/emc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emc_nml.hh ../include/emc_nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emccfg.h ../include/emccfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcglb.h ../include/emcglb.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcpos.h ../include/emcpos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcpose.h ../include/emcpose.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/interp_return.hh ../include/interp_return.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/interpl.hh ../include/interpl.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/motion_types.h ../include/motion_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/debugflags.h ../include/debugflags.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_internal.hh ../include/interp_internal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_fwd.hh ../include/interp_fwd.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_base.hh ../include/interp_base.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/modal_state.hh ../include/modal_state.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/rs274ngc.hh ../include/rs274ngc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/sai/saicanon.hh ../include/saicanon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/hal.h ../include/hal.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/hal_parport.h ../include/hal_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/drivers/mesa-hostmot2/hostmot2-serial.h ../include/hostmot2-serial.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/locmem.hh ../include/locmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/memsem.hh ../include/memsem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/phantom.hh ../include/phantom.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/physmem.hh ../include/physmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/recvn.h ../include/recvn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/rem_msg.hh ../include/rem_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/sendn.h ../include/sendn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/shmem.hh ../include/shmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/tcpmem.hh ../include/tcpmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms.hh ../include/cms.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_aup.hh ../include/cms_aup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_cfg.hh ../include/cms_cfg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_dup.hh ../include/cms_dup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_srv.hh ../include/cms_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_up.hh ../include/cms_up.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_user.hh ../include/cms_user.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_xup.hh ../include/cms_xup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cmsdiag.hh ../include/cmsdiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/tcp_opts.hh ../include/tcp_opts.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/tcp_srv.hh ../include/tcp_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/inifile/inifile.h ../include/inifile.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/inifile/inifile.hh ../include/inifile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/linklist/linklist.hh ../include/linklist.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/cmd_msg.hh ../include/cmd_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml.hh ../include/nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_mod.hh ../include/nml_mod.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_oi.hh ../include/nml_oi.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_srv.hh ../include/nml_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_type.hh ../include/nml_type.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nmlmsg.hh ../include/nmlmsg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nmldiag.hh ../include/nmldiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/stat_msg.hh ../include/stat_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_sem.h ../include/_sem.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/sem.hh ../include/sem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_shm.h ../include/_shm.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/shm.hh ../include/shm.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_timer.h ../include/_timer.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/timer.hh ../include/timer.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/posemath.h ../include/posemath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/gotypes.h ../include/gotypes.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/gomath.h ../include/gomath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/sincos.h ../include/sincos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs.hh ../include/rcs.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs_exit.hh ../include/rcs_exit.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs_print.hh ../include/rcs_print.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcsversion.h ../include/rcsversion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi.h ../include/rtapi.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_app.h ../include/rtapi_app.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_atomic.h ../include/rtapi_atomic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_bitops.h ../include/rtapi_bitops.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_bool.h ../include/rtapi_bool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_byteorder.h ../include/rtapi_byteorder.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_firmware.h ../include/rtapi_firmware.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_device.h ../include/rtapi_device.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_gfp.h ../include/rtapi_gfp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_limits.h ../include/rtapi_limits.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_io.h ../include/rtapi_io.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math.h ../include/rtapi_math.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_list.h ../include/rtapi_list.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math_i386.h ../include/rtapi_math_i386.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math64.h ../include/rtapi_math64.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_mutex.h ../include/rtapi_mutex.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_parport.h ../include/rtapi_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_pci.h ../include/rtapi_pci.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_slab.h ../include/rtapi_slab.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_stdint.h ../include/rtapi_stdint.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_ctype.h ../include/rtapi_ctype.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_errno.h ../include/rtapi_errno.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_string.h ../include/rtapi_string.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_vsnprintf.h ../include/rtapi_vsnprintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/da.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/cs.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/fi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/hu.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/de.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/es.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/rs274ngc_pre.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/fr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/it.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ja.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/nb.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/pl.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/pt_BR.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ro.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sk.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ru.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sv.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/canonmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/pythonplugin/python_plugin.cc emc/pythonplugin/python_plugin.cc: In constructor 'PythonPlugin::PythonPlugin(_inittab*)': emc/pythonplugin/python_plugin.cc:298:22: warning: 'void Py_SetProgramName(const wchar_t*)' is deprecated [-Wdeprecated-declarations] 298 | Py_SetProgramName(program); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from /usr/include/boost/python/detail/wrap_python.hpp:178, from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/ssize_t.hpp:9, from /usr/include/boost/python/object.hpp:8, from emc/pythonplugin/python_plugin.hh:25, from emc/pythonplugin/python_plugin.cc:19: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ emc/pythonplugin/python_plugin.cc:326:3: warning: 'Py_UnbufferedStdioFlag' is deprecated [-Wdeprecated-declarations] 326 | Py_UnbufferedStdioFlag = 1; | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:48: /usr/include/python3.12/cpython/pydebug.h:20:37: note: declared here 20 | Py_DEPRECATED(3.12) PyAPI_DATA(int) Py_UnbufferedStdioFlag; | ^~~~~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/vi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_CN.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_HK.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_TW.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pyvcp Copying python script pyvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_input Copying python script hal_input make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gladevcp Copying python script gladevcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script scorbot-er-3 Copying python script scorbot-er-3 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mitsub_vfd Copying python script mitsub_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pmx485 Copying python script pmx485 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script z_level_compensation Copying python script z_level_compensation make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script sim-torch Copying python script sim-torch make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mqtt-publisher Copying python script mqtt-publisher make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pumagui Copying python script pumagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyemctypes.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script puma560gui Copying python script puma560gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script lineardelta Copying python script lineardelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script scaragui Copying python script scaragui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hexagui Copying python script hexagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script 5axisgui Copying python script 5axisgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script max5gui Copying python script max5gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script maho600gui Copying python script maho600gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hbmgui Copying python script hbmgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script melfagui Copying python script melfagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script rotarydelta Copying python script rotarydelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script millturngui Copying python script millturngui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzac-trt-gui Copying python script xyzac-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzbc-trt-gui Copying python script xyzbc-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzab-tdr-gui Copying python script xyzab-tdr-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script axis-remote Copying python script axis-remote make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script linuxcnctop Copying python script linuxcnctop make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_manualtoolchange Copying python script hal_manualtoolchange make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi Copying python script mdi make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script lintini Copying python script lintini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script image-to-gcode emc/usr_intf/axis/scripts/image-to-gcode.py:550: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {![regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" emc/usr_intf/axis/scripts/image-to-gcode.py:552: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {![regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" Copying python script image-to-gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script axis Copying python script axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script debuglevel Copying python script debuglevel make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script teach-in Copying python script teach-in make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script tracking-test Copying python script tracking-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script touchy Copying python script touchy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file touchy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_interface.py Copying python script hal_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script filechooser.py Copying python script filechooser.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying linuxcnc-wizard.gif make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script listing.py Copying python script listing.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file spindle.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file halui_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script stepconf emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script stepconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script import_mach.py Copying python script import_mach.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisx.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisz.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisu.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisv.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisa.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file help.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file mesa0.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyarrays.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file mesa1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script data.py emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script tests.py Copying python script tests.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file external.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/axis/extensions/_toglmodule.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file screen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file vcp.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file x_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file x_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file y_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file y_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file z_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file z_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file a_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script private_data.py Copying python script private_data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file a_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file s_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pncconf Copying python script pncconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file realtime.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file dialogs.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gscreen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gscreen2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gremlin Copying python script gremlin make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gremlin.py Copying python script gremlin.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qt5_graphics.py Copying python script qt5_graphics.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script keybindings.py Copying python script keybindings.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying INI script panelui_spec.ini cp emc/usr_intf/pyui/panelui_spec.ini ../lib/python/pyui/panelui_spec.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying INI script _panelui.ini cp emc/usr_intf/pyui/_panelui.ini ../lib/python/pyui/_panelui.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interpmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gscreen Copying python script gscreen make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pyui Copying python script pyui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script master.py Copying python script master.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script __init__.py Copying python script __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script panelui_validate.py Copying python script panelui_validate.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script commands.py Copying python script commands.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtvcp Copying python script qtvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gmoccapy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script dialogs.py Copying python script dialogs.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script getiniinfo.py Copying python script getiniinfo.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script notification.py Copying python script notification.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script player.py Copying python script player.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script icon_theme_helper.py Copying python script icon_theme_helper.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gmoccapy Copying python script gmoccapy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-materials emc/usr_intf/qtplasmac/qtplasmac-materials.py:288: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Tool\ number'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:294: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Kerf\ width'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:298: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:302: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ delay'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:305: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:309: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Feed\ rate'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:319: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pause\ at\ end\ of\ cut'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): Copying python script qtplasmac-materials make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-plasmac2qt Copying python script qtplasmac-plasmac2qt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-cfg2prefs Copying python script qtplasmac-cfg2prefs make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pmx485-test Copying python script pmx485-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac_gcode Copying python script qtplasmac_gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script M190 Copying python script M190 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdro Copying python script mdro make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script update_ini emc/ini/update_ini.py:17: SyntaxWarning: invalid escape sequence '\s' regex = "^\s*\[%s\](.+?)(?:^\s*\[|\Z)" % block emc/ini/update_ini.py:181: SyntaxWarning: invalid escape sequence '\s' all_sections = re.findall("^\s*\[(.+)\]", inistring, re.MULTILINE) emc/ini/update_ini.py:193: SyntaxWarning: invalid escape sequence '\[' section = re.match("(.*?)^\[", inistring, re.DOTALL | re.MULTILINE) emc/ini/update_ini.py:199: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:218: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[RS274NGC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:236: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMCMOT\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:267: SyntaxWarning: invalid escape sequence '\w' match = re.match('(?:#autoconverted|loadrt) +(\w+kins)', line) emc/ini/update_ini.py:270: SyntaxWarning: invalid escape sequence '\w' match = re.search('coordinates *= *(\w+)', line) emc/ini/update_ini.py:274: SyntaxWarning: invalid escape sequence '\w' match = re.search('kinstype *= *(\w+)', line) emc/ini/update_ini.py:289: SyntaxWarning: invalid escape sequence '\d' match = re.match('setp +gantrykins.joint-(\d) +(\d)', line) emc/ini/update_ini.py:301: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[TRAJ\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:309: SyntaxWarning: invalid escape sequence '\s' mv = re.findall("MAX_VELOCITY[\s=]+(\d*(\.\d+)?)", inistring, re.MULTILINE) emc/ini/update_ini.py:341: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[JOINT_%i\])"%j, inistring, re.MULTILINE): emc/ini/update_ini.py:342: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[AXIS_%s\])" % "XYZABCUVW"[j], inistring, re.MULTILINE): emc/ini/update_ini.py:388: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % J, inistring, re.DOTALL) emc/ini/update_ini.py:390: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % "XYZABCUVW".index(coordinates[J]), inistring, re.DOTALL) emc/ini/update_ini.py:394: SyntaxWarning: invalid escape sequence '\[' if not '\[AXIS_%i\]' % axisnum in subs: emc/ini/update_ini.py:395: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % axisnum : '[JOINT_%i]' % J}) emc/ini/update_ini.py:396: SyntaxWarning: invalid escape sequence '\.' subs2.update({'joint\.%i\.' % axisnum : 'joint.%i.' % J}) emc/ini/update_ini.py:398: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % J : '[JOINT_%i]' % J}) emc/ini/update_ini.py:487: SyntaxWarning: invalid escape sequence '\[' 'num_joints=\[TRAJ\]AXES': 'num_joints=[KINS]JOINTS', emc/ini/update_ini.py:498: SyntaxWarning: invalid escape sequence '\s' '^\s*setp\s+(joint\S+)\s+(axis\S+)\s+(\S+)\s*$': Copying python script update_ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/debounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/counter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/encoder_ratio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/enum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/halmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/boss_plc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/mux_generic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/threads.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/supply.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/siggen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/sim_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/lcd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/weighted_sum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/modmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_speaker.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/pid.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/streamer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/sampler.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/cpuinfo.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_bb_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_pi_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/axis/extensions/emcmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/bitfile.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/bspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/dpll.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/abs_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/led.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/inm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/gcodemodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/inmux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_ppmc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/ioport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hostmot2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/raw.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/rcpwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pktuart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/ssr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/outm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_gm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/resolver.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/tram.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/tp_pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i90.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i43.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_pci.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/module_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/xy2mod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_spi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/setsserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyinterp1.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/utils/scope_rt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/trivkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rotatekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/maxkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/tripodkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/corexykins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_rpspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/kins_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/lineardeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/userkfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rosekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/scorbot-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rotarydeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/switchkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_eth.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/xyzac-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/pentakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/xyzbc-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/sserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/scarakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genhexkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/5axiskins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/trtfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/cubic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/pumakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/homemod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tpmod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tcq.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/spherical_arc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' config.status: creating ../scripts/setup_designer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking liblinuxcnc.a make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/motion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/homing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script halcompile Copying python script halcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/lineardeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/command.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/rotarydeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/boss_plc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnc_module_helper make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/blendmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/debounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/enum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/counter.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/control.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/encoder_ratio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/stepgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lcd.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux_generic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pwmgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/siggen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pid.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/threads.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/supply.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library liblinuxcncini.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/weighted_sum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/watchdog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/modmath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' tooldata: depends: objects/emc/tooldata/tooldata_mmap.o objects/emc/tooldata/tooldata_common.o objects/emc/tooldata/tooldata_db.o tooldata: Linking: libtooldata.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/streamer.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module _togl.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sampler.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_speaker.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_bb_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_gm.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_ppmc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_pi_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_pci.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_7i43.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_7i90.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/setsserial.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_spi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_eth.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hostmot2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/classicladder_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_rpspi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_lib.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scope_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/maxkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rotatekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/trivkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tripodkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lineardeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/corexykins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rosekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pentakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rotarydeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf liblinuxcncini.so.0 ../lib/liblinuxcncini.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scorbot-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzac-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzbc-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/genhexkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/genserkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scarakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pumakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/5axiskins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/homemod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/motmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tpmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage abs.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library liblinuxcnchal.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage abs_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage and2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage anglejog.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage axistest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bin2gray.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage biquad.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bitslice.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bitwise.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage blend.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage carousel.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarke2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bldc.9 :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage charge_pump.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarke3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking inivar make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarkeinv.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage comp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage constant.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_float_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_float_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage corexy_by_hal.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage dbounce.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ddt.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage deadzone.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage demux.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage differential.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage div2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage edge.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage estop_latch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage eoffset_per_angle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage feedcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gearchange.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage flipflop.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage filter_kalman.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gantry.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gray2bin.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage histobins.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library libposemath.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage homecomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage invert.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ilowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage integ.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage hypot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage joyhandle.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage knob2float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit1.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage latencybins.9 :1: SyntaxWarning: invalid escape sequence '\(' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit_axis.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lincurve.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage logic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage maj3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lut5.9 :1: SyntaxWarning: invalid escape sequence '\*' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage match8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_pktgyro_test.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage message.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage max31855.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage millturn.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage minmax.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mult2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage moveoff.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage multiclick.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage multiswitch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux16.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux4.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage near.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage not.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage offset.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ohmic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage or2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage oneshot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage orient.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sample_hold.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage scale.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage scaled_s32_sums.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage select8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_home_switch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage plasmac.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_matrix_kb.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_axis_hardware.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage simple_tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sphereprobe.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_parport.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sum2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage spindle_monitor.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage steptest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage threadtest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thcud.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage time.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage timedelay.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage timedelta.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tof.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage toggle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage toggle2nist.9 :1: SyntaxWarning: invalid escape sequence '\[' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ton.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tristate_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tristate_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage updown.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage userkins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage wcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xhc_hb04_util.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xor2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xyzab_tdr_kins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage serport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_7i65.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tpcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thermistor.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_uart.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thermistor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halstreamer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halsampler make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking panelui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking shuttle make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking sendkeys make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hy_gt_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking svd-ps_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking gs2_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing wj200_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing pi500_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking rtapi_app make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libtooldata.so.0 ../lib/libtooldata.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking vfs11_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking xhc-hb04 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halmeter make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking vfdb_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing abs.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing abs_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing and2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing anglejog.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing axistest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking mb2hal make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bin2gray.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing biquad.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hy_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bitwise.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module lineardeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/lineardeltakins.so objects/emc/kinematics/lineardeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing blend.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bldc.comp :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing carousel.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module rotarydeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/rotarydeltakins.so objects/emc/kinematics/rotarydeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing charge_pump.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarke2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarke3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarkeinv.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing comp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing constant.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing corexy_by_hal.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing dbounce.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ddt.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing deadzone.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing differential.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing demux.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing div2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing edge.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing eoffset_per_angle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing estop_latch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing feedcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing filter_kalman.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing flipflop.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gantry.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gearchange.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gray2bin.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing histobins.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing homecomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing hypot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ilowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing integ.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing invert.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing joyhandle.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing knob2float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing latencybins.comp :1: SyntaxWarning: invalid escape sequence '\(' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit1.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit_axis.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lut5.comp :1: SyntaxWarning: invalid escape sequence '\*' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing maj3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halscope make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing match8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing max31855.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_pktgyro_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing message.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing millturn.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing minmax.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing moveoff.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mult2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing multiclick.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing multiswitch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux16.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux4.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing near.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing not.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ohmic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing offset.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing oneshot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing orient.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing or2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halcmd hal/utils/../hal_priv.h:135:27: warning: type of 'hal_data' does not match original declaration [-Wlto-type-mismatch] 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:246:16: note: type 'struct hal_data_t' should match type 'struct hal_data_t' 246 | typedef struct hal_data_t { | ^ hal/utils/../hal_priv.h:135:27: note: 'hal_data' was previously declared here 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:135:27: note: code may be misoptimized unless '-fno-strict-aliasing' is used make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sample_hold.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing scale.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing scaled_s32_sums.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing select8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing plasmac.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_home_switch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_axis_hardware.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_matrix_kb.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing simple_tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sphereprobe.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_parport.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing spindle_monitor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing steptest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sum2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thcud.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing threadtest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing time.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing timedelay.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tof.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing toggle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing timedelta.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ton.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing toggle2nist.comp :1: SyntaxWarning: invalid escape sequence '\[' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking classicladder make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tristate_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tristate_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing userkins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking libpyplugin.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,libpyplugin.so.0 -shared -o ../lib/libpyplugin.so.0 objects/emc/pythonplugin/python_plugin.o ../lib/liblinuxcncini.so -lstdc++ -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing updown.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing wcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xor2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xyzab_tdr_kins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xhc_hb04_util.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing serport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_7i65.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_uart.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/abs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/abs_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/and2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bin2gray.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bitwise.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/axistest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bitslice.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/blend.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/charge_pump.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/biquad.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/anglejog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarke2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarke3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/comp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/constant.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarkeinv.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_float_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_float_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/corexy_by_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/dbounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/deadzone.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ddt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/carousel.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/differential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/demux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking xhc-whb04b-6 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/edge.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/estop_latch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/feedcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/div2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/flipflop.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gray2bin.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gearchange.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bldc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/filter_kalman.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/homecomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gantry.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/eoffset_per_angle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/integ.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/histobins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/hypot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/knob2float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ilowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/invert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit1.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/latencybins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/joyhandle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lincurve.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/logic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lut5.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/maj3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit_axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/match8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/message.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/minmax.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mult2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mesa_pktgyro_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/multiswitch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/millturn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux16.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/multiclick.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/max31855.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux4.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/not.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/offset.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/near.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/or2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ohmic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/scale.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sample_hold.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/scaled_s32_sums.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/orient.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/select8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_home_switch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/moveoff.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sphereprobe.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sum2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/steptest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/spindle_monitor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/threadtest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/thc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/timedelay.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/thcud.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tof.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/timedelta.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/time.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/toggle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/toggle2nist.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_axis_hardware.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ton.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libposemath.so.0 ../lib/libposemath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf liblinuxcnchal.so.0 ../lib/liblinuxcnchal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tristate_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tristate_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/updown.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/wcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xor2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libpyplugin.so.0 ../lib/libpyplugin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/userkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/serport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/mesa_uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xhc_hb04_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xyzab_tdr_kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling objects/hal/user_comps/thermistor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/mesa_7i65.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/wj200_vfd/wj200_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/abs.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/abs_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/and2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/anglejog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bin2gray.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/axistest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/pi500_vfd/pi500_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/biquad.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bitslice.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bldc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bitwise.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/blend.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/carousel.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/charge_pump.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarke2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarke3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarkeinv.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/comp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/constant.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' emc/Submakefile:Linking genserkins make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_float_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_float_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/corexy_by_hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/deadzone.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/demux.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/dbounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ddt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/differential.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/div2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/edge.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/eoffset_per_angle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module _hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/feedcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/estop_latch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/plasmac.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/filter_kalman.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/flipflop.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gray2bin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gantry.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gearchange.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/histobins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/homecomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hypot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ilowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/invert.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/integ.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/joyhandle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/latencybins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/knob2float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit1.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit_axis.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lincurve.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/logic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lut5.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/match8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/maj3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/max31855.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_pktgyro_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/message.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/millturn.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/minmax.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/moveoff.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mult2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/multiclick.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/multiswitch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux16.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux4.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/near.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/not.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ohmic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/offset.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/oneshot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/or2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/orient.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sample_hold.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scale.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scaled_s32_sums.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/plasmac.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/select8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_axis_hardware.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_home_switch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/simple_tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sphereprobe.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/spindle_monitor.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/steptest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sum2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/thc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/thcud.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/threadtest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/time.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/timedelay.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/timedelta.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tof.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/toggle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ton.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/toggle2nist.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tristate_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/updown.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tristate_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/userkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xhc_hb04_util.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/wcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xor2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzab_tdr_kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/serport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_uart.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_7i65.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking pi500_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking thermistor make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking wj200_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library libnml.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libnml.so.0 ../lib/libnml.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking motion-logger make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcncsvr make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' emc/tooldata/tool_watch.cc: In function 'int main(int, char**)': emc/tooldata/tool_watch.cc:56:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 56 | fprintf(stderr,"%8ld EMC_STAT\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:57:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 57 | fprintf(stderr,"%8ld EMC_IO_STAT\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:58:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 58 | fprintf(stderr,"%8ld EMC_TOOL_STAT\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:59:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 59 | fprintf(stderr,"%8ld EMC_COOLANT_STAT\n",sizeof(EMC_COOLANT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:60:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 60 | fprintf(stderr,"%8ld EMC_AUX_STAT\n",sizeof(EMC_AUX_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:61:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 61 | fprintf(stderr,"%8ld EMC_LUBE_STAT\n",sizeof(EMC_LUBE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:62:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 62 | fprintf(stderr,"%8ld EMC_TASK_STAT\n",sizeof(EMC_TASK_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:63:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 63 | fprintf(stderr,"%8ld EMC_MOTION_STAT\n",sizeof(EMC_MOTION_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:64:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 64 | fprintf(stderr,"%8ld EMC_TRAJ_STAT\n",sizeof(EMC_TRAJ_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:65:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 65 | fprintf(stderr,"%8ld EMC_JOINT_STAT\n",sizeof(EMC_JOINT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:66:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 66 | fprintf(stderr,"%8ld EMC_AXIS_STAT\n",sizeof(EMC_AXIS_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:67:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 67 | fprintf(stderr,"%8ld EMC_SPINDLE_STAT\n",sizeof(EMC_SPINDLE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking io make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcncrsh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking iov2 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnclcd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking schedrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking librs274.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,librs274.so.0 -shared -o ../lib/librs274.so.0 objects/emc/rs274ngc/interp_arc.o objects/emc/rs274ngc/interp_array.o objects/emc/rs274ngc/interp_base.o objects/emc/rs274ngc/interp_check.o objects/emc/rs274ngc/interp_convert.o objects/emc/rs274ngc/interp_queue.o objects/emc/rs274ngc/interp_cycles.o objects/emc/rs274ngc/interp_execute.o objects/emc/rs274ngc/interp_find.o objects/emc/rs274ngc/interp_internal.o objects/emc/rs274ngc/interp_inverse.o objects/emc/rs274ngc/interp_read.o objects/emc/rs274ngc/interp_write.o objects/emc/rs274ngc/interp_o_word.o objects/emc/rs274ngc/interp_g7x.o objects/emc/rs274ngc/modal_state.o objects/emc/rs274ngc/nurbs_additional_functions.o objects/emc/rs274ngc/interp_namedparams.o objects/emc/rs274ngc/interp_python.o objects/emc/rs274ngc/interp_remap.o objects/emc/rs274ngc/interp_setup.o objects/emc/rs274ngc/canonmodule.o objects/emc/rs274ngc/pyparamclass.o objects/emc/rs274ngc/pyemctypes.o objects/emc/rs274ngc/pyinterp1.o objects/emc/rs274ngc/pyblock.o objects/emc/rs274ngc/pyarrays.o objects/emc/rs274ngc/interpmodule.o objects/emc/rs274ngc/rs274ngc_pre.o objects/emc/rs274ngc/interp_inspection.o ../lib/liblinuxcncini.so ../lib/libpyplugin.so ../lib/liblinuxcnchal.so.0 ../lib/libtooldata.so.0 -lstdc++ -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf librs274.so.0 ../lib/librs274.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking canterp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module gcode.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/gcode.so objects/emc/rs274ngc/gcodemodule.o ../lib/librs274.so.0 -lstdc++ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking rs274 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking milltask c++ -std=gnu++17 -o ../bin/milltask objects/emc/motion/emcmotglb.o objects/emc/task/emctask.o objects/emc/task/emccanon.o objects/emc/task/emctaskmain.o objects/emc/motion/usrmotintf.o objects/emc/motion/emcmotutil.o objects/emc/task/taskintf.o objects/emc/motion/dbuf.o objects/emc/motion/stashf.o objects/emc/task/taskmodule.o objects/emc/task/taskclass.o objects/emc/task/backtrace.o ../lib/librs274.so.0 ../lib/liblinuxcnc.a ../lib/libnml.so.0 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/liblinuxcnchal.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' + popd ~/RPM/BUILD/linuxcnc-2.9.2 + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.86353 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/linuxcnc-buildroot + : + /bin/rm -rf -- /usr/src/tmp/linuxcnc-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/usr/bin:/bin:/usr/local/bin:/usr/games + cd linuxcnc-2.9.2 + pushd src ~/RPM/BUILD/linuxcnc-2.9.2/src ~/RPM/BUILD/linuxcnc-2.9.2 + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/linuxcnc-buildroot make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/bin \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../rtlib/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules /usr/libexec/rpm-build/install -p -m 4755 ../bin/linuxcnc_module_helper /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 4755 ../bin/rtapi_app /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../scripts/rtapi.conf /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/src/tmp/linuxcnc-buildroot/usr/lib \ /usr/src/tmp/linuxcnc-buildroot/lib/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles \ /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/*.py ../lib/python/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/rs274/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/touchy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gscreen/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/*.{py,ui,txt} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/designer/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/widget_icons/*.{png,gif} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/plugins/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins cp -dR ../lib/python/qtvcp/lib/* /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gmoccapy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/*.{py,png,glade} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/stepconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pncconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pyui/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/plasmac/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0755 ../bin/stepconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pncconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_input /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mitsub_vfd /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mqtt-publisher /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/z_level_compensation /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pmx485 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/sim-torch /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gladevcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis-remote /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/debuglevel /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/linuxcnctop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mdi /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_manualtoolchange /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/image-to-gcode /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/touchy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gscreen /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../lib/python/qtvcp/designer/install_script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -m 0755 ../bin/gmoccapy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/teach-in /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/scorbot-er-3 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pumagui ../bin/puma560gui ../bin/lineardelta ../bin/scaragui ../bin/hexagui ../bin/5axisgui ../bin/max5gui ../bin/maho600gui ../bin/hbmgui ../bin/rotarydelta ../bin/melfagui ../bin/millturngui ../bin/xyzac-trt-gui ../bin/xyzbc-trt-gui ../bin/xyzab-tdr-gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtplasmac-materials ../bin/qtplasmac-plasmac2qt ../bin/qtplasmac-cfg2prefs ../bin/qtplasmac_gcode ../bin/pmx485-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/linuxcnc-wizard.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/images/*.{png,gif,xbm,ngc} /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/tcl/*.tcl /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl /usr/libexec/rpm-build/install -p -m 0644 ../share/gscreen/images/*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images cp -dR ../share/gscreen/skins/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins cp -dR ../share/qtvcp/images/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images cp -dR ../share/qtvcp/screens/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens cp -dR ../share/qtvcp/panels/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels cp -dR ../share/qtvcp/widgets_ui/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui cp -dR ../share/gmoccapy/icons/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man1/*.1 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/hal_add_funct_to_thread.3hal ../docs/man/man3/hal_bit_t.3hal ../docs/man/man3/hal_bool.3hal ../docs/man/man3/hal_create_thread.3hal ../docs/man/man3/hal_del_funct_from_thread.3hal ../docs/man/man3/hal_exit.3hal ../docs/man/man3/hal_export_funct.3hal ../docs/man/man3/hal_float_t.3hal ../docs/man/man3/hal_get_lock.3hal ../docs/man/man3/hal_init.3hal ../docs/man/man3/hal_link.3hal ../docs/man/man3/hal_malloc.3hal ../docs/man/man3/hal_param_alias.3hal ../docs/man/man3/hal_param_bit_new.3hal ../docs/man/man3/hal_param_bit_newf.3hal ../docs/man/man3/hal_param_float_new.3hal ../docs/man/man3/hal_param_float_newf.3hal ../docs/man/man3/hal_param_new.3hal ../docs/man/man3/hal_param_s32_new.3hal ../docs/man/man3/hal_param_s32_newf.3hal ../docs/man/man3/hal_param_u32_new.3hal ../docs/man/man3/hal_param_u32_newf.3hal ../docs/man/man3/hal_parport.3hal ../docs/man/man3/hal_pin_alias.3hal ../docs/man/man3/hal_pin_bit_new.3hal ../docs/man/man3/hal_pin_bit_newf.3hal ../docs/man/man3/hal_pin_float_new.3hal ../docs/man/man3/hal_pin_float_newf.3hal ../docs/man/man3/hal_pin_new.3hal ../docs/man/man3/hal_pin_port_new.3hal ../docs/man/man3/hal_pin_port_newf.3hal ../docs/man/man3/hal_pin_s32_new.3hal ../docs/man/man3/hal_pin_s32_newf.3hal ../docs/man/man3/hal_pin_u32_new.3hal ../docs/man/man3/hal_pin_u32_newf.3hal ../docs/man/man3/hal_port.3hal ../docs/man/man3/hal_ready.3hal ../docs/man/man3/hal_s32_t.3hal ../docs/man/man3/hal_set_constructor.3hal ../docs/man/man3/hal_set_lock.3hal ../docs/man/man3/hal_signal_delete.3hal ../docs/man/man3/hal_signal_new.3hal ../docs/man/man3/hal_start_threads.3hal ../docs/man/man3/hal_stream.3hal ../docs/man/man3/hal_type_t.3hal ../docs/man/man3/hal_u32_t.3hal ../docs/man/man3/hal_unlink.3hal ../docs/man/man3/intro.3hal ../docs/man/man3/undocumented.3hal /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/EXPORT_FUNCTION.3rtapi ../docs/man/man3/MODULE_AUTHOR.3rtapi ../docs/man/man3/MODULE_DESCRIPTION.3rtapi ../docs/man/man3/MODULE_LICENSE.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi ../docs/man/man3/RTAPI_MP_INT.3rtapi ../docs/man/man3/RTAPI_MP_LONG.3rtapi ../docs/man/man3/RTAPI_MP_STRING.3rtapi ../docs/man/man3/intro.3rtapi ../docs/man/man3/rtapi_app_exit.3rtapi ../docs/man/man3/rtapi_app_main.3rtapi ../docs/man/man3/rtapi_atomic.3rtapi ../docs/man/man3/rtapi_bool.3rtapi ../docs/man/man3/rtapi_byteorder.3rtapi ../docs/man/man3/rtapi_clock_set_period.3rtapi ../docs/man/man3/rtapi_delay.3rtapi ../docs/man/man3/rtapi_delay_max.3rtapi ../docs/man/man3/rtapi_device.3rtapi ../docs/man/man3/rtapi_div_u64.3rtapi ../docs/man/man3/rtapi_div_u64_rem.3rtapi ../docs/man/man3/rtapi_exit.3rtapi ../docs/man/man3/rtapi_firmware.3rtapi ../docs/man/man3/rtapi_get_clocks.3rtapi ../docs/man/man3/rtapi_get_msg_level.3rtapi ../docs/man/man3/rtapi_get_time.3rtapi ../docs/man/man3/rtapi_gfp.3rtapi ../docs/man/man3/rtapi_inb.3rtapi ../docs/man/man3/rtapi_init.3rtapi ../docs/man/man3/rtapi_io.3rtapi ../docs/man/man3/rtapi_is.3rtapi ../docs/man/man3/rtapi_list.3rtapi ../docs/man/man3/rtapi_module_param.3rtapi ../docs/man/man3/rtapi_mutex.3rtapi ../docs/man/man3/rtapi_open_as_root.3rtapi ../docs/man/man3/rtapi_outb.3rtapi ../docs/man/man3/rtapi_parport.3rtapi ../docs/man/man3/rtapi_pci.3rtapi ../docs/man/man3/rtapi_print.3rtapi ../docs/man/man3/rtapi_prio.3rtapi ../docs/man/man3/rtapi_prio_highest.3rtapi ../docs/man/man3/rtapi_prio_lowest.3rtapi ../docs/man/man3/rtapi_prio_next_higher.3rtapi ../docs/man/man3/rtapi_prio_next_lower.3rtapi ../docs/man/man3/rtapi_region.3rtapi ../docs/man/man3/rtapi_release_region.3rtapi ../docs/man/man3/rtapi_request_region.3rtapi ../docs/man/man3/rtapi_set_msg_level.3rtapi ../docs/man/man3/rtapi_shmem.3rtapi ../docs/man/man3/rtapi_shmem_delete.3rtapi ../docs/man/man3/rtapi_shmem_getptr.3rtapi ../docs/man/man3/rtapi_shmem_new.3rtapi ../docs/man/man3/rtapi_slab.3rtapi ../docs/man/man3/rtapi_snprintf.3rtapi ../docs/man/man3/rtapi_stdint.3rtapi ../docs/man/man3/rtapi_string.3rtapi ../docs/man/man3/rtapi_strlcpy.3rtapi ../docs/man/man3/rtapi_task_delete.3rtapi ../docs/man/man3/rtapi_task_new.3rtapi ../docs/man/man3/rtapi_task_pause.3rtapi ../docs/man/man3/rtapi_task_resume.3rtapi ../docs/man/man3/rtapi_task_self.3rtapi ../docs/man/man3/rtapi_task_start.3rtapi ../docs/man/man3/rtapi_task_wait.3rtapi ../docs/man/man3/undocumented.3rtapi /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man9/abs.9 ../docs/man/man9/abs_s32.9 ../docs/man/man9/and2.9 ../docs/man/man9/anglejog.9 ../docs/man/man9/at_pid.9 ../docs/man/man9/axis.9 ../docs/man/man9/axistest.9 ../docs/man/man9/bin2gray.9 ../docs/man/man9/biquad.9 ../docs/man/man9/bitslice.9 ../docs/man/man9/bitwise.9 ../docs/man/man9/bldc.9 ../docs/man/man9/blend.9 ../docs/man/man9/carousel.9 ../docs/man/man9/charge_pump.9 ../docs/man/man9/clarke2.9 ../docs/man/man9/clarke3.9 ../docs/man/man9/clarkeinv.9 ../docs/man/man9/classicladder.9 ../docs/man/man9/comp.9 ../docs/man/man9/constant.9 ../docs/man/man9/conv_bit_float.9 ../docs/man/man9/conv_bit_s32.9 ../docs/man/man9/conv_bit_u32.9 ../docs/man/man9/conv_float_s32.9 ../docs/man/man9/conv_float_u32.9 ../docs/man/man9/conv_s32_bit.9 ../docs/man/man9/conv_s32_float.9 ../docs/man/man9/conv_s32_u32.9 ../docs/man/man9/conv_u32_bit.9 ../docs/man/man9/conv_u32_float.9 ../docs/man/man9/conv_u32_s32.9 ../docs/man/man9/corexy_by_hal.9 ../docs/man/man9/counter.9 ../docs/man/man9/dbounce.9 ../docs/man/man9/ddt.9 ../docs/man/man9/deadzone.9 ../docs/man/man9/debounce.9 ../docs/man/man9/demux.9 ../docs/man/man9/differential.9 ../docs/man/man9/div2.9 ../docs/man/man9/edge.9 ../docs/man/man9/encoder.9 ../docs/man/man9/encoder_ratio.9 ../docs/man/man9/enum.9 ../docs/man/man9/eoffset_per_angle.9 ../docs/man/man9/estop_latch.9 ../docs/man/man9/feedcomp.9 ../docs/man/man9/filter_kalman.9 ../docs/man/man9/flipflop.9 ../docs/man/man9/gantry.9 ../docs/man/man9/gantrykins.9 ../docs/man/man9/gearchange.9 ../docs/man/man9/genhexkins.9 ../docs/man/man9/genserkins.9 ../docs/man/man9/gentrivkins.9 ../docs/man/man9/gladevcp.9 ../docs/man/man9/gray2bin.9 ../docs/man/man9/hal_bb_gpio.9 ../docs/man/man9/hal_parport.9 ../docs/man/man9/histobins.9 ../docs/man/man9/hm2_7i43.9 ../docs/man/man9/hm2_7i90.9 ../docs/man/man9/hm2_eth.9 ../docs/man/man9/hm2_pci.9 ../docs/man/man9/hm2_rpspi.9 ../docs/man/man9/hm2_spi.9 ../docs/man/man9/homecomp.9 ../docs/man/man9/hostmot2.9 ../docs/man/man9/hypot.9 ../docs/man/man9/ilowpass.9 ../docs/man/man9/integ.9 ../docs/man/man9/invert.9 ../docs/man/man9/joyhandle.9 ../docs/man/man9/kins.9 ../docs/man/man9/knob2float.9 ../docs/man/man9/latencybins.9 ../docs/man/man9/lcd.9 ../docs/man/man9/limit1.9 ../docs/man/man9/limit2.9 ../docs/man/man9/limit3.9 ../docs/man/man9/limit_axis.9 ../docs/man/man9/lincurve.9 ../docs/man/man9/lineardeltakins.9 ../docs/man/man9/logic.9 ../docs/man/man9/lowpass.9 ../docs/man/man9/lut5.9 ../docs/man/man9/maj3.9 ../docs/man/man9/match8.9 ../docs/man/man9/matrix_kb.9 ../docs/man/man9/max31855.9 ../docs/man/man9/maxkins.9 ../docs/man/man9/mesa_7i65.9 ../docs/man/man9/mesa_pktgyro_test.9 ../docs/man/man9/mesa_uart.9 ../docs/man/man9/message.9 ../docs/man/man9/millturn.9 ../docs/man/man9/minmax.9 ../docs/man/man9/motion.9 ../docs/man/man9/moveoff.9 ../docs/man/man9/mult2.9 ../docs/man/man9/multiclick.9 ../docs/man/man9/multiswitch.9 ../docs/man/man9/mux16.9 ../docs/man/man9/mux2.9 ../docs/man/man9/mux4.9 ../docs/man/man9/mux8.9 ../docs/man/man9/mux_generic.9 ../docs/man/man9/near.9 ../docs/man/man9/not.9 ../docs/man/man9/offset.9 ../docs/man/man9/ohmic.9 ../docs/man/man9/oneshot.9 ../docs/man/man9/opto_ac5.9 ../docs/man/man9/or2.9 ../docs/man/man9/orient.9 ../docs/man/man9/pentakins.9 ../docs/man/man9/pid.9 ../docs/man/man9/plasmac.9 ../docs/man/man9/pumakins.9 ../docs/man/man9/pwmgen.9 ../docs/man/man9/rosekins.9 ../docs/man/man9/rotatekins.9 ../docs/man/man9/sample_hold.9 ../docs/man/man9/sampler.9 ../docs/man/man9/scale.9 ../docs/man/man9/scaled_s32_sums.9 ../docs/man/man9/scarakins.9 ../docs/man/man9/select8.9 ../docs/man/man9/serport.9 ../docs/man/man9/setsserial.9 ../docs/man/man9/siggen.9 ../docs/man/man9/sim_axis_hardware.9 ../docs/man/man9/sim_encoder.9 ../docs/man/man9/sim_home_switch.9 ../docs/man/man9/sim_matrix_kb.9 ../docs/man/man9/sim_parport.9 ../docs/man/man9/sim_spindle.9 ../docs/man/man9/simple_tp.9 ../docs/man/man9/sphereprobe.9 ../docs/man/man9/spindle.9 ../docs/man/man9/spindle_monitor.9 ../docs/man/man9/sserial.9 ../docs/man/man9/stepgen.9 ../docs/man/man9/steptest.9 ../docs/man/man9/streamer.9 ../docs/man/man9/sum2.9 ../docs/man/man9/supply.9 ../docs/man/man9/thc.9 ../docs/man/man9/thcud.9 ../docs/man/man9/threads.9 ../docs/man/man9/threadtest.9 ../docs/man/man9/time.9 ../docs/man/man9/timedelay.9 ../docs/man/man9/timedelta.9 ../docs/man/man9/tof.9 ../docs/man/man9/toggle.9 ../docs/man/man9/toggle2nist.9 ../docs/man/man9/ton.9 ../docs/man/man9/tp.9 ../docs/man/man9/tpcomp.9 ../docs/man/man9/tripodkins.9 ../docs/man/man9/tristate_bit.9 ../docs/man/man9/tristate_float.9 ../docs/man/man9/trivkins.9 ../docs/man/man9/updown.9 ../docs/man/man9/userkins.9 ../docs/man/man9/watchdog.9 ../docs/man/man9/wcomp.9 ../docs/man/man9/weighted_sum.9 ../docs/man/man9/xhc_hb04_util.9 ../docs/man/man9/xor2.9 ../docs/man/man9/xyzab_tdr_kins.9 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 /usr/libexec/rpm-build/install -p -m 0644 objects/*.msg /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs /usr/libexec/rpm-build/install -p -m 0755 ../scripts/realtime /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halrun /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halcmd_twopass /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/haltcl /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/simulate_probe /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/sim_pin /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../*.png ../*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../lib/hallib/* /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -m 0644 ../tcl/*.png /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc # install all the sample configs, including subdirs (tar is required on debian systems, and common on others) /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs ((cd ../configs && tar --exclude CVS --exclude .cvsignore --exclude .gitignore -cf - .) | (cd /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs && tar -xf -)) /usr/libexec/rpm-build/install -p -m 0755 ../bin/inivar ../bin/halstreamer ../bin/halsampler ../bin/panelui ../bin/mb2hal ../bin/gs2_vfd ../bin/hy_gt_vfd ../bin/svd-ps_vfd ../bin/shuttle ../bin/xhc-hb04 ../bin/sendkeys ../bin/thermistor ../bin/vfs11_vfd ../bin/classicladder ../bin/halcmd ../bin/halrmt ../bin/halmeter ../bin/halscope ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../bin/vfdb_vfd ../bin/wj200_vfd ../bin/pi500_vfd ../bin/hy_vfd ../bin/xhc-whb04b-6 ../bin/linuxcncrsh ../bin/schedrmt ../bin/linuxcnclcd ../bin/halui ../bin/linuxcncsvr ../bin/milltask ../bin/io ../bin/iov2 ../bin/genserkins ../bin/rs274 ../bin/motion-logger ../bin/tool_mmap_read ../bin/tool_watch ../bin/tooledit ../bin/ngcgui ../bin/pyngcgui ../bin/gremlin_view ../bin/halshow /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_info /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/setup_designer /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_var /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/monitor-xhc-hb04 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-plot /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/moveoff_gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/hal-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/xhc-hb04-accels /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/pyvcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/gladevcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcncmkdesktop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/update_ini /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halreport /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/libnml.so.0 ../lib/liblinuxcnchal.so.0 ../lib/liblinuxcnc.a ../lib/librs274.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 /usr/src/tmp/linuxcnc-buildroot/usr/lib cp --no-dereference ../lib/liblinuxcnchal.so ../lib/liblinuxcncini.so ../lib/libnml.so ../lib/libposemath.so ../lib/libpyplugin.so ../lib/librs274.so ../lib/libtooldata.so /usr/src/tmp/linuxcnc-buildroot/usr/lib ldconfig /usr/src/tmp/linuxcnc-buildroot/usr/lib /bin/bash: line 1: ldconfig: command not found make: [Makefile:734: install-kernel-indep] Error 127 (ignored) /usr/libexec/rpm-build/install -p -m 0644 ../lib/linuxcnc/canterp.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../include/linuxcnc.h ../include/emcIniFile.hh ../include/iniaxis.hh ../include/inijoint.hh ../include/inispindle.hh ../include/initraj.hh ../include/inihal.hh ../include/cubic.h ../include/kinematics.h ../include/switchkins.h ../include/genhexkins.h ../include/genserkins.h ../include/pentakins.h ../include/pumakins.h ../include/tc.h ../include/tc_types.h ../include/tcq.h ../include/tp.h ../include/tp_types.h ../include/spherical_arc.h ../include/blendmath.h ../include/emcmotcfg.h ../include/motion.h ../include/homing.h ../include/simple_tp.h ../include/state_tag.h ../include/usrmotintf.h ../include/axis.h ../include/canon.hh ../include/canon_position.hh ../include/emctool.h ../include/emc.hh ../include/emc_nml.hh ../include/emccfg.h ../include/emcglb.h ../include/emcpos.h ../include/emcpose.h ../include/interp_return.hh ../include/interpl.hh ../include/motion_types.h ../include/debugflags.h ../include/interp_internal.hh ../include/interp_fwd.hh ../include/interp_base.hh ../include/modal_state.hh ../include/rs274ngc.hh ../include/saicanon.hh ../include/hal.h ../include/hal_parport.h ../include/hostmot2-serial.h ../include/locmem.hh ../include/memsem.hh ../include/phantom.hh ../include/physmem.hh ../include/recvn.h ../include/rem_msg.hh ../include/sendn.h ../include/shmem.hh ../include/tcpmem.hh ../include/cms.hh ../include/cms_aup.hh ../include/cms_cfg.hh ../include/cms_dup.hh ../include/cms_srv.hh ../include/cms_up.hh ../include/cms_user.hh ../include/cms_xup.hh ../include/cmsdiag.hh ../include/tcp_opts.hh ../include/tcp_srv.hh ../include/inifile.h ../include/inifile.hh ../include/linklist.hh ../include/cmd_msg.hh ../include/nml.hh ../include/nml_mod.hh ../include/nml_oi.hh ../include/nml_srv.hh ../include/nml_type.hh ../include/nmldiag.hh ../include/nmlmsg.hh ../include/stat_msg.hh ../include/_sem.h ../include/sem.hh ../include/_shm.h ../include/shm.hh ../include/_timer.h ../include/timer.hh ../include/posemath.h ../include/gotypes.h ../include/gomath.h ../include/sincos.h ../include/rcs.hh ../include/rcs_exit.hh ../include/rcs_print.hh ../include/rcsversion.h ../include/rtapi.h ../include/rtapi_app.h ../include/rtapi_atomic.h ../include/rtapi_bitops.h ../include/rtapi_bool.h ../include/rtapi_byteorder.h ../include/rtapi_device.h ../include/rtapi_firmware.h ../include/rtapi_gfp.h ../include/rtapi_io.h ../include/rtapi_limits.h ../include/rtapi_list.h ../include/rtapi_math.h ../include/rtapi_math_i386.h ../include/rtapi_math64.h ../include/rtapi_mutex.h ../include/rtapi_parport.h ../include/rtapi_pci.h ../include/rtapi_slab.h ../include/rtapi_stdint.h ../include/rtapi_ctype.h ../include/rtapi_errno.h ../include/rtapi_string.h ../include/rtapi_vsnprintf.h /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/ cp -dR ../nc_files/3D_Chips.html ../nc_files/3D_Chips.ngc ../nc_files/3D_Chips.pdf ../nc_files/3dtest.ngc ../nc_files/M101 ../nc_files/M102.c ../nc_files/arcspiral.ngc ../nc_files/b-index.ngc ../nc_files/cds.ngc ../nc_files/comp-g1.ngc ../nc_files/comp.ngc ../nc_files/comp311.ngc ../nc_files/comp311_2.ngc ../nc_files/cone.ngc ../nc_files/daisy.ngc ../nc_files/factorial.ngc ../nc_files/filtertest-gui.py ../nc_files/filtertest.py ../nc_files/flowsnake.ngc ../nc_files/flowsnake.py ../nc_files/g20sub.ngc ../nc_files/g76.ngc ../nc_files/g881.ngc ../nc_files/g881min.ngc ../nc_files/g882.ngc ../nc_files/gcmc_lib ../nc_files/gladevcp_lib ../nc_files/gmoccapy_2_tools_with_cutter_radius_compensation.ngc ../nc_files/gridprobe.ngc ../nc_files/hole-circle.ngc ../nc_files/holecircle.py ../nc_files/increment.ngc ../nc_files/involute.py ../nc_files/lathe-g76.ngc ../nc_files/lathe_g70_71_demo.ngc ../nc_files/lathe_g7x_face_boring.ngc ../nc_files/lathe_g7x_quadrants.ngc ../nc_files/lathe_pawn.ngc ../nc_files/lathecomp.ngc ../nc_files/m250.ngc ../nc_files/m61demo.ngc ../nc_files/m6demo.ngc ../nc_files/m6remap.ngc ../nc_files/m70m72-demo.ngc ../nc_files/m73-demo.ngc ../nc_files/m75.ngc ../nc_files/m76.ngc ../nc_files/macros ../nc_files/mmount.ngc ../nc_files/nestedcall.ngc ../nc_files/ngcgui_lib ../nc_files/offsets.ngc ../nc_files/orphans ../nc_files/plasmac ../nc_files/plasmatest.ngc ../nc_files/polar.ngc ../nc_files/probe ../nc_files/probe-hole.ngc ../nc_files/remap-subroutines ../nc_files/remap_lib ../nc_files/retval.ngc ../nc_files/roparams.ngc ../nc_files/skeleton.ngc ../nc_files/smartprobe.ngc ../nc_files/spiral.ngc ../nc_files/systems.ngc ../nc_files/testm6fail.ngc ../nc_files/threading.ngc ../nc_files/tool-length-probe.ngc ../nc_files/toplevel.ngc ../nc_files/tort.ngc ../nc_files/torus.png ../nc_files/touchoff.ngc ../nc_files/useful-subroutines.ngc ../nc_files/x-trim.ngc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0755 ../nc_files/M101 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0644 ../tcl/TkLinuxCNC /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/libexec/rpm-build/install -p -m 0644 Makefile.modinc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/linuxcnc.tcl ../tcl/ngcgui.tcl ../tcl/ngcgui_app.tcl ../tcl/ngcgui_ttt.tcl ../tcl/pkgIndex.tcl ../tcl/show_errors.tcl ../tcl/tklinuxcnc.tcl ../tcl/tooledit.tcl ../tcl/twopass.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/hal.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/linuxcnc.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/pkgIndex.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/bin/cbutton.tcl ../tcl/bin/emccalib.tcl ../tcl/bin/emcdebug.tcl ../tcl/bin/emctesting.tcl ../tcl/bin/emctuning.tcl ../tcl/bin/genedit.tcl ../tcl/bin/halconfig.tcl ../tcl/bin/halshow.tcl ../tcl/bin/pickconfig.tcl ../tcl/bin/tkbackplot.tcl ../tcl/bin/popimage /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin /usr/libexec/rpm-build/install -p -m 0644 ../tcl/scripts/balloon.tcl ../tcl/scripts/emchelp.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0755 ../tcl/scripts/Set_Coordinates.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/stepconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/touchy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen2.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/gmoccapy/gmoccapy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/pncconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gremlin_view.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/popupkeyboard.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc_big.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/hal_python.xml /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs/ /usr/libexec/rpm-build/install -p -m 0644 ../share/glade/pixmaps/hicolor/22x22/actions/widget*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions/ /usr/libexec/rpm-build/install -p -m 0644 ../share/gtksourceview-2.0/language-specs/*.lang /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs/ /usr/libexec/rpm-build/install -p -m 0644 ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ for d in ../share/applications/linuxcnc.desktop ../share/applications/linuxcnc-latency.desktop ../share/applications/linuxcnc-latency-histogram.desktop ../share/applications/linuxcnc-pncconf.desktop ../share/applications/linuxcnc-stepconf.desktop ; do \ /usr/libexec/rpm-build/install -p -m 0644 $d /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ ; \ done /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/README.adoc ../docs/INSTALL.adoc ../docs/AUTHORS /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/help/asciidoc-markup_es.adoc ../docs/help/rtfaults.adoc ../docs/help/rtfaults_es.adoc ../docs/help/tklinuxcnc.adoc /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/etc/axis_light_background /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/README /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/README.axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' + popd ~/RPM/BUILD/linuxcnc-2.9.2 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/lib/udev/rules.d + cp debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules /usr/src/tmp/linuxcnc-buildroot/usr/lib/udev/rules.d + desktop-file-install --dir /usr/src/tmp/linuxcnc-buildroot/usr/share/applications --remove-key=Version --remove-category=X-CNC --remove-category=Utility /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc.desktop + cat + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps + convert linuxcncicon.png -resize 16x16 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps/linuxcncicon.png WARNING: The convert command is deprecated in IMv7, use "magick" instead of "convert" or "magick convert" + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps + convert linuxcncicon.png -resize 32x32 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps/linuxcncicon.png WARNING: The convert command is deprecated in IMv7, use "magick" instead of "convert" or "magick convert" + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps + convert linuxcncicon.png -resize 48x48 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps/linuxcncicon.png WARNING: The convert command is deprecated in IMv7, use "magick" instead of "convert" or "magick convert" + pushd /usr/src/tmp/linuxcnc-buildroot/usr/share/man ~/tmp/linuxcnc-buildroot/usr/share/man ~/RPM/BUILD/linuxcnc-2.9.2 ++ find -name '*.?' + xz ./man9/xyzab_tdr_kins.9 ./man9/xor2.9 ./man9/xhc_hb04_util.9 ./man9/weighted_sum.9 ./man9/wcomp.9 ./man9/watchdog.9 ./man9/userkins.9 ./man9/updown.9 ./man9/trivkins.9 ./man9/tristate_float.9 ./man9/tristate_bit.9 ./man9/tripodkins.9 ./man9/tpcomp.9 ./man9/tp.9 ./man9/ton.9 ./man9/toggle2nist.9 ./man9/toggle.9 ./man9/tof.9 ./man9/timedelta.9 ./man9/timedelay.9 ./man9/time.9 ./man9/threadtest.9 ./man9/threads.9 ./man9/thcud.9 ./man9/thc.9 ./man9/supply.9 ./man9/sum2.9 ./man9/streamer.9 ./man9/steptest.9 ./man9/stepgen.9 ./man9/sserial.9 ./man9/spindle_monitor.9 ./man9/spindle.9 ./man9/sphereprobe.9 ./man9/simple_tp.9 ./man9/sim_spindle.9 ./man9/sim_parport.9 ./man9/sim_matrix_kb.9 ./man9/sim_home_switch.9 ./man9/sim_encoder.9 ./man9/sim_axis_hardware.9 ./man9/siggen.9 ./man9/setsserial.9 ./man9/serport.9 ./man9/select8.9 ./man9/scarakins.9 ./man9/scaled_s32_sums.9 ./man9/scale.9 ./man9/sampler.9 ./man9/sample_hold.9 ./man9/rotatekins.9 ./man9/rosekins.9 ./man9/pwmgen.9 ./man9/pumakins.9 ./man9/plasmac.9 ./man9/pid.9 ./man9/pentakins.9 ./man9/orient.9 ./man9/or2.9 ./man9/opto_ac5.9 ./man9/oneshot.9 ./man9/ohmic.9 ./man9/offset.9 ./man9/not.9 ./man9/near.9 ./man9/mux_generic.9 ./man9/mux8.9 ./man9/mux4.9 ./man9/mux2.9 ./man9/mux16.9 ./man9/multiswitch.9 ./man9/multiclick.9 ./man9/mult2.9 ./man9/moveoff.9 ./man9/motion.9 ./man9/minmax.9 ./man9/millturn.9 ./man9/message.9 ./man9/mesa_uart.9 ./man9/mesa_pktgyro_test.9 ./man9/mesa_7i65.9 ./man9/maxkins.9 ./man9/max31855.9 ./man9/matrix_kb.9 ./man9/match8.9 ./man9/maj3.9 ./man9/lut5.9 ./man9/lowpass.9 ./man9/logic.9 ./man9/lineardeltakins.9 ./man9/lincurve.9 ./man9/limit_axis.9 ./man9/limit3.9 ./man9/limit2.9 ./man9/limit1.9 ./man9/lcd.9 ./man9/latencybins.9 ./man9/knob2float.9 ./man9/kins.9 ./man9/joyhandle.9 ./man9/invert.9 ./man9/integ.9 ./man9/ilowpass.9 ./man9/hypot.9 ./man9/hostmot2.9 ./man9/homecomp.9 ./man9/hm2_spi.9 ./man9/hm2_rpspi.9 ./man9/hm2_pci.9 ./man9/hm2_eth.9 ./man9/hm2_7i90.9 ./man9/hm2_7i43.9 ./man9/histobins.9 ./man9/hal_parport.9 ./man9/hal_bb_gpio.9 ./man9/gray2bin.9 ./man9/gladevcp.9 ./man9/gentrivkins.9 ./man9/genserkins.9 ./man9/genhexkins.9 ./man9/gearchange.9 ./man9/gantrykins.9 ./man9/gantry.9 ./man9/flipflop.9 ./man9/filter_kalman.9 ./man9/feedcomp.9 ./man9/estop_latch.9 ./man9/eoffset_per_angle.9 ./man9/enum.9 ./man9/encoder_ratio.9 ./man9/encoder.9 ./man9/edge.9 ./man9/div2.9 ./man9/differential.9 ./man9/demux.9 ./man9/debounce.9 ./man9/deadzone.9 ./man9/ddt.9 ./man9/dbounce.9 ./man9/counter.9 ./man9/corexy_by_hal.9 ./man9/conv_u32_s32.9 ./man9/conv_u32_float.9 ./man9/conv_u32_bit.9 ./man9/conv_s32_u32.9 ./man9/conv_s32_float.9 ./man9/conv_s32_bit.9 ./man9/conv_float_u32.9 ./man9/conv_float_s32.9 ./man9/conv_bit_u32.9 ./man9/conv_bit_s32.9 ./man9/conv_bit_float.9 ./man9/constant.9 ./man9/comp.9 ./man9/classicladder.9 ./man9/clarkeinv.9 ./man9/clarke3.9 ./man9/clarke2.9 ./man9/charge_pump.9 ./man9/carousel.9 ./man9/blend.9 ./man9/bldc.9 ./man9/bitwise.9 ./man9/bitslice.9 ./man9/biquad.9 ./man9/bin2gray.9 ./man9/axistest.9 ./man9/axis.9 ./man9/at_pid.9 ./man9/anglejog.9 ./man9/and2.9 ./man9/abs_s32.9 ./man9/abs.9 ./man1/xyzbc-trt-gui.1 ./man1/xyzac-trt-gui.1 ./man1/xhc-whb04b-6.1 ./man1/xhc-hb04.1 ./man1/xhc-hb04-accels.1 ./man1/wj200_vfd.1 ./man1/vfs11_vfd.1 ./man1/vfdb_vfd.1 ./man1/update_ini.1 ./man1/touchy.1 ./man1/tooledit.1 ./man1/thermistor.1 ./man1/teach-in.1 ./man1/svd-ps_vfd.1 ./man1/stepconf.1 ./man1/simulate_probe.1 ./man1/sim_pin.1 ./man1/sim-torch.1 ./man1/shuttle.1 ./man1/sendkeys.1 ./man1/scorbot-er-3.1 ./man1/schedrmt.1 ./man1/scaragui.1 ./man1/rtapi_app.1 ./man1/rs274.1 ./man1/rotarydelta.1 ./man1/qtvcp.1 ./man1/qtplasmac-setup.1 ./man1/qtplasmac-plasmac2qt.1 ./man1/qtplasmac-materials.1 ./man1/qtplasmac-cfg2prefs.1 ./man1/pyvcp_demo.1 ./man1/pyvcp.1 ./man1/pyui.1 ./man1/pyngcgui.1 ./man1/pumagui.1 ./man1/puma560gui.1 ./man1/pncconf.1 ./man1/pmx485.1 ./man1/pmx485-test.1 ./man1/pi500_vfd.1 ./man1/panelui.1 ./man1/ngcgui.1 ./man1/mqtt-publisher.1 ./man1/moveoff_gui.1 ./man1/motion-logger.1 ./man1/monitor-xhc-hb04.1 ./man1/mitsub_vfd.1 ./man1/milltask.1 ./man1/mdro.1 ./man1/mdi.1 ./man1/mb2hal.1 ./man1/max5gui.1 ./man1/maho600gui.1 ./man1/linuxcnctop.1 ./man1/linuxcncsvr.1 ./man1/linuxcncrsh.1 ./man1/linuxcncmkdesktop.1 ./man1/linuxcnclcd.1 ./man1/linuxcnc_var.1 ./man1/linuxcnc_module_helper.1 ./man1/linuxcnc_info.1 ./man1/linuxcnc.1 ./man1/lineardelta.1 ./man1/latency-test.1 ./man1/latency-plot.1 ./man1/latency-histogram.1 ./man1/iov2.1 ./man1/iocontrol.1 ./man1/io.1 ./man1/inivar.1 ./man1/image-to-gcode.1 ./man1/hy_vfd.1 ./man1/hy_gt_vfd.1 ./man1/hexagui.1 ./man1/hbmgui.1 ./man1/halui.1 ./man1/haltcl.1 ./man1/halstreamer.1 ./man1/halshow.1 ./man1/halscope.1 ./man1/halsampler.1 ./man1/halrun.1 ./man1/halrmt.1 ./man1/halreport.1 ./man1/halmeter.1 ./man1/halcompile.1 ./man1/halcmd_twopass.1 ./man1/halcmd.1 ./man1/hal_manualtoolchange.1 ./man1/hal_input.1 ./man1/hal-histogram.1 ./man1/gscreen.1 ./man1/gs2_vfd.1 ./man1/gremlin_view.1 ./man1/gmoccapy.1 ./man1/gladevcp_demo.1 ./man1/gladevcp.1 ./man1/emccalib.1 ./man1/elbpcom.1 ./man1/debuglevel.1 ./man1/axis.1 ./man1/axis-remote.1 ./man1/5axisgui.1 + popd ~/RPM/BUILD/linuxcnc-2.9.2 + rm /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnc.a + /usr/lib/rpm/find-lang linuxcnc gmoccapy --output=linuxcnc.lang + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/linuxcnc-buildroot (auto) mode of './usr/bin/rtapi_app' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) mode of './usr/bin/linuxcnc_module_helper' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) Verifying and fixing files in /usr/src/tmp/linuxcnc-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) Checking contents of files in /usr/src/tmp/linuxcnc-buildroot/ (default) Compressing files in /usr/src/tmp/linuxcnc-buildroot (auto) removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' Adjusting library links in /usr/src/tmp/linuxcnc-buildroot ./lib: (from :0) ./usr/lib: (from :0) liblinuxcncini.so.0 -> liblinuxcncini.so.0 libposemath.so.0 -> libposemath.so.0 libnml.so.0 -> libnml.so.0 liblinuxcnchal.so.0 -> liblinuxcnchal.so.0 librs274.so.0 -> librs274.so.0 libpyplugin.so.0 -> libpyplugin.so.0 libtooldata.so.0 -> libtooldata.so.0 ./usr/lib/python3/site-packages/qtvcp/lib: (from :0) Verifying ELF objects in /usr/src/tmp/linuxcnc-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=relaxed) verify-elf: WARNING: ./usr/bin/motion-logger: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/rs274: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/milltask: uses non-LFS functions: fopen freopen stat verify-elf: WARNING: ./usr/bin/linuxcnclcd: uses non-LFS functions: fcntl lstat readdir verify-elf: WARNING: ./usr/bin/hy_vfd: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/vfdb_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halscope: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halrmt: uses non-LFS functions: fcntl fopen stat verify-elf: WARNING: ./usr/bin/halcmd: uses non-LFS functions: fcntl fopen readdir verify-elf: WARNING: ./usr/bin/classicladder: uses non-LFS functions: fcntl fopen open readdir verify-elf: WARNING: ./usr/bin/vfs11_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/sendkeys: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/xhc-hb04: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/shuttle: uses non-LFS functions: glob open verify-elf: WARNING: ./usr/bin/mb2hal: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halsampler: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/halstreamer: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/rtapi_app: uses non-LFS functions: __open_2 fopen mmap open setrlimit stat verify-elf: WARNING: ./usr/bin/linuxcnc_module_helper: uses non-LFS functions: readdir verify-elf: WARNING: ./usr/lib/libtooldata.so.0: uses non-LFS functions: fopen lseek mmap open verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_XOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_BOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_UOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_PROBE_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_MOTION_CONTROL_MODEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_SPEEDi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_BLOCK_DELETEb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16GET_BLOCK_DELETEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14IO_PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SPINDLE_RETRACTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_PLANEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10NURBS_FEEDiSt6vectorI13CONTROL_POINTSaIS0_EEj verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21GET_EXTERNAL_TC_FAULTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10UPDATE_TAG8StateTag verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15RELOAD_TOOLDATAv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23CLEAR_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10CLAMP_AXIS10CANON_AXIS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11LOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_PARAMETER_FILE_NAMEPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z4WAITiiid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_VOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12START_CHANGEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_COFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_TRAVERSE_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25SET_OPTIONAL_PROGRAM_STOPb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17GET_EXTERNAL_MISTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24SPINDLE_RETRACT_TRAVERSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z3LOGPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_ANALOG_INPUTid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z27GET_EXTERNAL_OFFSET_APPLIEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_FEED_HOLD_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PARAMETER_FILE_NAMEPci verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_OFFSETSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22SET_NAIVECAM_TOLERANCEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_LENGTH_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9RIGID_TAPidddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31STOP_CUTTER_RADIUS_COMPENSATIONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8LOGCLOSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_MODEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_FEED_OVERRIDE_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20CLEAR_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_AXIS_MASKv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13UNLOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G5X_OFFSETiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z6FINISHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_FEED_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_FLOODv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ON_RESETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_TRAVERSE_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G92_OFFSETddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31GET_EXTERNAL_SELECTED_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_DIGITAL_INPUTii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_SPINDLE_MODEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SET_XY_ROTATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7LOGOPENPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_ANGLE_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z46GET_EXTERNAL_MOTION_CONTROL_NAIVECAM_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_SPINDLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z36GET_EXTERNAL_SPINDLE_OVERRIDE_ENABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32START_CUTTER_RADIUS_COMPENSATIONi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_YOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30SET_CUTTER_RADIUS_COMPENSATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_WOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9LOGAPPENDPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17DISABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: USER_DEFINED_FUNCTION verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _task verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_AUX_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_AOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_QUEUE_EMPTYv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PROBE_TRIPPED_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: builtin_modules verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18CHANGE_TOOL_NUMBERi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_TOOL_TABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22USE_TOOL_LENGTH_OFFSET7EmcPose verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_ZOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21SET_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16ENABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_TOOL_TABLE_ENTRYii7EmcPosedddi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z37GET_EXTERNAL_MOTION_CONTROL_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_ADAPTIVE_FEED_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20USE_NO_SPINDLE_FORCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CANON_ERRORPKcz verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z28WAIT_SPINDLE_ORIENT_COMPLETEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TC_REASONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_LENGTH_UNIT_TYPEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/liblinuxcnchal.so.0: uses non-LFS functions: fopen stat verify-elf: WARNING: ./usr/lib/libnml.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/liblinuxcncini.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXDestroyContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryServerString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDeleteLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDrawBuffer verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryExtension verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXMakeCurrent verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glFlush verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGetString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXCreateContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXUseXFont verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGenLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXChooseVisual verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXGetConfig verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glViewport verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXSwapBuffers verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/linuxcnc.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/hal.so: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_destroy verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hm2_get_sserial verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_shmem_base verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_del_funct_from_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_detach verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_writable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_write verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_maxdepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitch verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_stop_threads verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpRunCycle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_allhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetMotionType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetCycleTime verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetTermCond verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsForward verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_index_enable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetRunDir verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: write_homing_out_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_sequence verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpActiveDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotData verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetSpindleSync verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_synchronized verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_cancel_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsInverse verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitchable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecTag verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_needs_unlock_first verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_is_active verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVlimit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddCircle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetDout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpIsDone verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpPause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpCreate verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddRigidTap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpResume verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homeMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_unhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tcqFull verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_idle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAbort verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_home_joint verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: read_homing_in_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpQueueDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddLine verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_at_index_search_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homing_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpClear verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_get_pktuart verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_tram_add_bspi_frame verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_allocate_bspi_tram verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_clear_fifo verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_setup_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_write_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_set_read_function verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_free verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_alias verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: uses non-LFS functions: open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: uses non-LFS functions: fopen mmap stat verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_task_self verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: uses non-LFS functions: fopen mmap open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_next_lower verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_vsnprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_pause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_start verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_clock_set_period verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_highest verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: uses non-LFS functions: mmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print Splitting links to aliased files under /{,s}bin in /usr/src/tmp/linuxcnc-buildroot Bytecompiling python3 modules in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Bytecompiling python3 modules with optimization in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -O /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py Bytecompiling python3 modules with optimization-2 in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -OO /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Hardlinking identical .pyc and .opt-?.pyc files './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/glnav.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/glnav.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hal.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/vismach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vismach.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' Processing files: linuxcnc-2.9.2-alt4.20240203 warning: File listed twice: /usr/lib/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/canterp.so warning: File listed twice: /usr/lib/linuxcnc/modules warning: File listed twice: /usr/lib/linuxcnc/modules/5axiskins.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/and2.so warning: File listed twice: /usr/lib/linuxcnc/modules/anglejog.so warning: File listed twice: /usr/lib/linuxcnc/modules/axistest.so warning: File listed twice: /usr/lib/linuxcnc/modules/bin2gray.so warning: File listed twice: /usr/lib/linuxcnc/modules/biquad.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitslice.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitwise.so warning: File listed twice: /usr/lib/linuxcnc/modules/bldc.so warning: File listed twice: /usr/lib/linuxcnc/modules/blend.so warning: File listed twice: /usr/lib/linuxcnc/modules/boss_plc.so warning: File listed twice: /usr/lib/linuxcnc/modules/carousel.so warning: File listed twice: /usr/lib/linuxcnc/modules/charge_pump.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke2.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke3.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarkeinv.so warning: File listed twice: /usr/lib/linuxcnc/modules/classicladder_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/comp.so warning: File listed twice: /usr/lib/linuxcnc/modules/constant.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexy_by_hal.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexykins.so warning: File listed twice: /usr/lib/linuxcnc/modules/counter.so warning: File listed twice: /usr/lib/linuxcnc/modules/dbounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/ddt.so warning: File listed twice: /usr/lib/linuxcnc/modules/deadzone.so warning: File listed twice: /usr/lib/linuxcnc/modules/debounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/demux.so warning: File listed twice: /usr/lib/linuxcnc/modules/differential.so warning: File listed twice: /usr/lib/linuxcnc/modules/div2.so warning: File listed twice: /usr/lib/linuxcnc/modules/edge.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder_ratio.so warning: File listed twice: /usr/lib/linuxcnc/modules/enum.so warning: File listed twice: /usr/lib/linuxcnc/modules/eoffset_per_angle.so warning: File listed twice: /usr/lib/linuxcnc/modules/estop_latch.so warning: File listed twice: /usr/lib/linuxcnc/modules/feedcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/filter_kalman.so warning: File listed twice: /usr/lib/linuxcnc/modules/flipflop.so warning: File listed twice: /usr/lib/linuxcnc/modules/gantry.so warning: File listed twice: /usr/lib/linuxcnc/modules/gearchange.so warning: File listed twice: /usr/lib/linuxcnc/modules/genhexkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/genserkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/gray2bin.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_bb_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_gm.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_lib.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_pi_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_ppmc.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_speaker.so warning: File listed twice: /usr/lib/linuxcnc/modules/histobins.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i43.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i90.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_eth.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_pci.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_rpspi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_spi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/homecomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/homemod.so warning: File listed twice: /usr/lib/linuxcnc/modules/hostmot2.so warning: File listed twice: /usr/lib/linuxcnc/modules/hypot.so warning: File listed twice: /usr/lib/linuxcnc/modules/ilowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/integ.so warning: File listed twice: /usr/lib/linuxcnc/modules/invert.so warning: File listed twice: /usr/lib/linuxcnc/modules/joyhandle.so warning: File listed twice: /usr/lib/linuxcnc/modules/knob2float.so warning: File listed twice: /usr/lib/linuxcnc/modules/latencybins.so warning: File listed twice: /usr/lib/linuxcnc/modules/lcd.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit1.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit2.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit3.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit_axis.so warning: File listed twice: /usr/lib/linuxcnc/modules/lincurve.so warning: File listed twice: /usr/lib/linuxcnc/modules/lineardeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/modules/logic.so warning: File listed twice: /usr/lib/linuxcnc/modules/lowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/lut5.so warning: File listed twice: /usr/lib/linuxcnc/modules/maj3.so warning: File listed twice: /usr/lib/linuxcnc/modules/match8.so warning: File listed twice: /usr/lib/linuxcnc/modules/matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/max31855.so warning: File listed twice: /usr/lib/linuxcnc/modules/maxkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_7i65.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_uart.so warning: File listed twice: /usr/lib/linuxcnc/modules/message.so warning: File listed twice: /usr/lib/linuxcnc/modules/millturn.so warning: File listed twice: /usr/lib/linuxcnc/modules/minmax.so warning: File listed twice: /usr/lib/linuxcnc/modules/modmath.so warning: File listed twice: /usr/lib/linuxcnc/modules/motmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/moveoff.so warning: File listed twice: /usr/lib/linuxcnc/modules/mult2.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiclick.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiswitch.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux16.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux2.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux4.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux8.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux_generic.so warning: File listed twice: /usr/lib/linuxcnc/modules/near.so warning: File listed twice: /usr/lib/linuxcnc/modules/not.so warning: File listed twice: /usr/lib/linuxcnc/modules/offset.so warning: File listed twice: /usr/lib/linuxcnc/modules/ohmic.so warning: File listed twice: /usr/lib/linuxcnc/modules/oneshot.so warning: File listed twice: /usr/lib/linuxcnc/modules/or2.so warning: File listed twice: /usr/lib/linuxcnc/modules/orient.so warning: File listed twice: /usr/lib/linuxcnc/modules/pentakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pid.so warning: File listed twice: /usr/lib/linuxcnc/modules/plasmac.so warning: File listed twice: /usr/lib/linuxcnc/modules/pumakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pwmgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/rosekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotarydeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotatekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/sample_hold.so warning: File listed twice: /usr/lib/linuxcnc/modules/sampler.so warning: File listed twice: /usr/lib/linuxcnc/modules/scale.so warning: File listed twice: /usr/lib/linuxcnc/modules/scaled_s32_sums.so warning: File listed twice: /usr/lib/linuxcnc/modules/scarakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/scope_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/scorbot-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/select8.so warning: File listed twice: /usr/lib/linuxcnc/modules/serport.so warning: File listed twice: /usr/lib/linuxcnc/modules/setsserial.so warning: File listed twice: /usr/lib/linuxcnc/modules/siggen.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_axis_hardware.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_home_switch.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/simple_tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/sphereprobe.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle_monitor.so warning: File listed twice: /usr/lib/linuxcnc/modules/stepgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/steptest.so warning: File listed twice: /usr/lib/linuxcnc/modules/streamer.so warning: File listed twice: /usr/lib/linuxcnc/modules/sum2.so warning: File listed twice: /usr/lib/linuxcnc/modules/supply.so warning: File listed twice: /usr/lib/linuxcnc/modules/thc.so warning: File listed twice: /usr/lib/linuxcnc/modules/thcud.so warning: File listed twice: /usr/lib/linuxcnc/modules/threads.so warning: File listed twice: /usr/lib/linuxcnc/modules/threadtest.so warning: File listed twice: /usr/lib/linuxcnc/modules/time.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelay.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelta.so warning: File listed twice: /usr/lib/linuxcnc/modules/tof.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle2nist.so warning: File listed twice: /usr/lib/linuxcnc/modules/ton.so warning: File listed twice: /usr/lib/linuxcnc/modules/tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/tpmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/tripodkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/trivkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/updown.so warning: File listed twice: /usr/lib/linuxcnc/modules/userkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/watchdog.so warning: File listed twice: /usr/lib/linuxcnc/modules/wcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/weighted_sum.so warning: File listed twice: /usr/lib/linuxcnc/modules/xhc_hb04_util.so warning: File listed twice: /usr/lib/linuxcnc/modules/xor2.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/realtime Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.hJvqSK find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py provides python3(screens.x1mill.x1mill_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py provides python3(screens.woodpecker.woodpecker_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py provides python3(screens.tester.tester_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py provides python3(screens.qttouchy.qttouchy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py provides python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py provides python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py provides python3(screens.qtplasmac.qtplasmac_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py provides python3(screens.qtplasmac.languages.qtplasmac)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py provides python3(screens.qtlathe.qtlathe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py provides python3(screens.qtdragon_hd.qtdragon_hd_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py provides python3(screens.qtdragon.qtdragon_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py provides python3(screens.qtaxis.qtaxis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py provides python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py provides python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py provides python3(screens.qt_cnc.qt_cnc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py provides python3(screens.blender.blender_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py provides python3(panels.vismach_scara.vismach_scara_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py provides python3(panels.vismach_router_atc.vismach_router_atc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py provides python3(panels.vismach_millturn.vismach_millturn_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py provides python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py provides python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py provides python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py provides python3(panels.versaprobe.versaprobe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py provides python3(panels.tool_dialog.tool_dialog_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py provides python3(panels.test_probe.test_probe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py provides python3(panels.test_panel.test_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py provides python3(panels.test_led.test_led_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py provides python3(panels.test_dial.test_dial_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py provides python3(panels.test_button.test_button_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py provides python3(panels.spindle_belts.spindle_belts_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py provides python3(panels.sim_panel.sim_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py provides python3(panels.qtplasmac_sim.qtplasmac_sim_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py provides python3(panels.copy.copy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py provides python3(panels.cam_align.cam_align_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py provides python3(involute)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py provides python3(holecircle)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py provides python3(flowsnake)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py provides python3(filtertest)(under non-std path /usr/share/linuxcnc/ncfiles) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.WAupQO find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gcode.so: underlinked libraries: /lib/libpython3.12.so.1.0 lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/linuxcnc.so: underlinked libraries: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0 python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so :550: SyntaxWarning: invalid escape sequence '\.' :552: SyntaxWarning: invalid escape sequence '\.' :289: SyntaxWarning: invalid escape sequence '\ ' :295: SyntaxWarning: invalid escape sequence '\ ' :299: SyntaxWarning: invalid escape sequence '\ ' :303: SyntaxWarning: invalid escape sequence '\ ' :306: SyntaxWarning: invalid escape sequence '\ ' :310: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :320: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\P' :446: SyntaxWarning: invalid escape sequence '\M' :17: SyntaxWarning: invalid escape sequence '\s' :181: SyntaxWarning: invalid escape sequence '\s' :193: SyntaxWarning: invalid escape sequence '\[' :199: SyntaxWarning: invalid escape sequence '\[' :218: SyntaxWarning: invalid escape sequence '\[' :236: SyntaxWarning: invalid escape sequence '\[' :267: SyntaxWarning: invalid escape sequence '\w' :270: SyntaxWarning: invalid escape sequence '\w' :274: SyntaxWarning: invalid escape sequence '\w' :289: SyntaxWarning: invalid escape sequence '\d' :301: SyntaxWarning: invalid escape sequence '\[' :309: SyntaxWarning: invalid escape sequence '\s' :341: SyntaxWarning: invalid escape sequence '\[' :342: SyntaxWarning: invalid escape sequence '\[' :388: SyntaxWarning: invalid escape sequence '\[' :390: SyntaxWarning: invalid escape sequence '\[' :394: SyntaxWarning: invalid escape sequence '\[' :395: SyntaxWarning: invalid escape sequence '\[' :396: SyntaxWarning: invalid escape sequence '\.' :398: SyntaxWarning: invalid escape sequence '\[' :487: SyntaxWarning: invalid escape sequence '\[' :498: SyntaxWarning: invalid escape sequence '\s' :769: SyntaxWarning: invalid escape sequence '\d' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\P' :319: SyntaxWarning: invalid escape sequence '\M' :2207: SyntaxWarning: invalid escape sequence '\(' :2208: SyntaxWarning: invalid escape sequence '\(' :2209: SyntaxWarning: invalid escape sequence '\(' :170: SyntaxWarning: invalid escape sequence '\d' :171: SyntaxWarning: invalid escape sequence '\d' :174: SyntaxWarning: invalid escape sequence '\d' :175: SyntaxWarning: invalid escape sequence '\d' :176: SyntaxWarning: invalid escape sequence '\d' :178: SyntaxWarning: invalid escape sequence '\d' :181: SyntaxWarning: invalid escape sequence '\d' :154: SyntaxWarning: invalid escape sequence '\d' :6109: SyntaxWarning: invalid escape sequence '\[' :49: SyntaxWarning: invalid escape sequence '\d' :51: SyntaxWarning: invalid escape sequence '\d' :57: SyntaxWarning: invalid escape sequence '\d' :59: SyntaxWarning: invalid escape sequence '\d' :30: SyntaxWarning: invalid escape sequence '\.' :32: SyntaxWarning: invalid escape sequence '\.' py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "atexit" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "errno" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "_thread" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "gcode" lines:[59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.OpenGLTk" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.interpret" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hershey" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "propertywindow" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.options" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "nf" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "bwidget" lines:[69] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "linuxcnc" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "glnav" lines:[72] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hal" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "subprocess" lines:[[1113], [[3962]], [4034]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "webbrowser" lines:[[[2089]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "vcpparse" lines:[[[3926]], [[[4049]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "_thread" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "linuxcnc" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "time" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "rs274.options" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: skipping "sys" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "hal" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.makepins" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.gladebuilder" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.core" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal_glib" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "sys" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "atexit" lines:[42] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "linuxcnc" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "time" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "qtvcp" lines:[[5801]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.makepins" lines:[[5823]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.combi_dro" lines:[[5824]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gmoccapy" lines:[[5825, 5826, 5827, 5828, 5829, 5830], [[5832]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gremlin_view: "gremlin_view" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "qtvcp" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal" lines:[92] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "errno" lines:[93] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gladevcp.makepins" lines:[94] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "atexit" lines:[96] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "time" lines:[97, 98] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal_glib" lines:[99] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "linuxcnc" lines:[197] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gscreen" lines:[198, 199, 200, 201] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gi.repository" lines:[[119], [131], [141]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "distro" lines:[[[165]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "inspect" lines:[[[889]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "collections" lines:[[[890]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "subprocess" lines:[[[3941]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "linux_event" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "hal" lines:[22, 28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "nf" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "rs274.options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "sys" lines:[22, 402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "time" lines:[402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "hal" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: skipping "sys" lines:[12] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.author" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.options" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "PIL" lines:[[29], [[502]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "Image" lines:[[[31]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter" lines:[[499], [[757]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "pickle" lines:[[506]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "nf" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "ImageTk" lines:[[[[504]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter.filedialog" lines:[[[758]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "vismach" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "lineardeltakins" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "linuxcnc" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "rs274.options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "tkinter" lines:[[122]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "_tkinter" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "vismach" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "hal" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "getopt" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "sys" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/modcompile: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "time" lines:[31] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "hal" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "linuxcnc" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "paho.mqtt.client" lines:[[[[53]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "optparse" lines:[[[118]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "time" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial.tools.list_ports" lines:[[32]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "errno" lines:[38] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "copy" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "multifilebuilder" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "touchy" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "pncconf" lines:[54, 55, 56, 57, 58, 59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "hal" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "vismach" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "hal" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyngcgui: "pyngcgui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyui: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: skipping "sys" lines:[37] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "vcpparse" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "hal" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: "json" lines:[[[[[[336]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "tkinter" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtCore" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtGui" lines:[[39]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtWidgets" lines:[[40]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebEngineWidgets" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebKitWidgets" lines:[[[[18]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp" lines:[[[117]], [533]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "linuxcnc" lines:[[[[152]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.lib" lines:[[[[[329]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.core" lines:[[[450]], [553]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "rotarydeltakins" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: skipping "sys" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "vismach" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: "hal" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "hal" lines:[35, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "errno" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "time" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "multifilebuilder" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "stepconf" lines:[116, 117, 118] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "defusedexpat" lines:[[47]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "xml.parsers" lines:[[[49]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "sys" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "atexit" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "time" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "linuxcnc" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "touchy" lines:[62, 63, 64, 65, 66, 67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "subprocess" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "datetime" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "vismach" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "hal" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "linuxcnc" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "scipy.interpolate" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py: "sys" lines:[[112]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py: skipping "sys" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "gladevcp.hal_pythonplugin" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "importlib" lines:[[4]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "linuxcnc" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "hal_glib" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "gladevcp.gtk_action" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "linuxcnc" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "qtvcp" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "hal" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "gladevcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "sys" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "time" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "atexit" lines:[829] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "subprocess" lines:[[[601], [617]], [[838]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp.core" lines:[[915]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.core" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "gladevcp.hal_widgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "gladevcp.hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "atexit" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_actions" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "subprocess" lines:[[[37]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "hal_widgets" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "linuxcnc" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gremlin" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "rs274.glcanon" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gcode" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_glib" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_actions" lines:[[41]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gladevcp.hal_actions" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "subprocess" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gremlin_view" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gladevcp" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "hal_widgets" lines:[[46]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "gladevcp.hal_widgets" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_glib" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.core" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_actions" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_actions" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "gladevcp.hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "pyngcgui" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "gladevcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_widgets" lines:[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.status_label" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.state_label" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.led" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.calculatorwidget" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.tooledit_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.drowidget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.iconview" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.combi_dro" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetwidget" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetpage_widget" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_bar" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_meter" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_graph" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_lightbutton" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.overridewidget" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.jogwheel" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.speedcontrol" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_dial" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_actions" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_filechooser" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_sourceview" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_mdihistory" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.macro_widget" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_pyngcgui" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin_plus" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "linuxcnc" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "hal_glib" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_widgets" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_actions" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_filechooser" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "os" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "tempfile" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py: "hal" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py: "qtvcp" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "gladevcp.hal_widgets" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "hal_widgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "gladevcp.hal_widgets" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_actions" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_actions" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.gladebuilder" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.hal_widgets" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.led" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "hal_glib" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.gladebuilder" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_widgets" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_actions" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "gladevcp.hal_widgets" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_widgets" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "gladevcp.hal_widgets" lines:[[26]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_widgets" lines:[[23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "gladevcp.hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib" lines:[[16], [73]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.xobject" lines:[[17], [74]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.protocol" lines:[[72]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py: "gladevcp.makepins" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "itertools" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi" lines:[[9]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi.repository" lines:[[12, 13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "cairo" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py: "gladevcp" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "qtvcp" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "gmoccapy" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "icon_theme_helper" lines:[[[40]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "gi.repository" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "sys" lines:[46] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "glnav" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.interpret" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "linuxcnc" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "gcode" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "time" lines:[68] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "_thread" lines:[74] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib.display" lines:[[56]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "sys" lines:[80] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "gladevcp.hal_actions" lines:[81] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "linuxcnc" lines:[82] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "time" lines:[83] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "glib" lines:[87] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "getopt" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py: "_hal" lines:[30, 31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "_hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "sys" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "time" lines:[8] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: "configparser" lines:[[[1960]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: "linuxcnc" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: skipping "sys" lines:[57] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: skipping "sys" lines:[62] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "linuxcnc" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "hal" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp" lines:[74] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp.hal_filechooser" lines:[[212]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gi.repository.GdkPixbuf" lines:[[456]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[[[[2987]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "glib" lines:[[[[2988]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "hal" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[[[35]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "zmq" lines:[[[[[[94]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "sys" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "hal" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "bwidget" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "time" lines:[55] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "vcpparse" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.dom.minidom" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.parsers.expat" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "rs274.options" lines:[[[1745]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "_thread" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "glnav" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "rs274" lines:[31, 32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "gcode" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp.widgets.fake_status" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "PyQt5.QtOpenGL" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "OpenGL" lines:[[22, 23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_pstat" lines:[288] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_action" lines:[302] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_tstat" lines:[318] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp.core" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi" lines:[[31], [279]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi.repository" lines:[[33], [280]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "espeak" lines:[[54]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "queue" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "distro" lines:[[[[98]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: skipping "time" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/colored_formatter.py: "logging" lines:[[116]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "atexit" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "linuxcnc" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "atexit" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "linuxcnc" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "atexit" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.qt_makegui" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.lib" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp.core" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "hal" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "sys" lines:[[189]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "PyQt5.QtCore" lines:[[190]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.lib" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "gladevcp.hal_filechooser" lines:[[879]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "popplerqt5" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/mill_xyz.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: skipping "itertools" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi.repository" lines:[[13, 14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "cairo" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: "qtvcp.lib.qt_vismach.primitives" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: skipping "plasmac" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.lib.qtplasmac" lines:[29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py: "cv2" lines:[[[270]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: skipping "sys" lines:[97] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter" lines:[[101]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.filedialog" lines:[[102]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.messagebox" lines:[[103]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "Tkinter" lines:[[105]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFileDialog" lines:[[106]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkMessageBox" lines:[[107]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "psyco" lines:[[114]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFont" lines:[[[6408]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.font" lines:[[[[6411]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "dbus.mainloop.pyqt5" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "sys" lines:[[255]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "PyQt5.QtCore" lines:[[256]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.qt_makegui" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.lib.aux_program_loader" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "qtvcp" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "hal_glib" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py: skipping "time" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.lib.writer.ext" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib" lines:[[[26]], [51]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.xobject" lines:[[[27]], [52]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.protocol" lines:[[50]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "qtvcp.lib.colored_formatter" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button_round" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.richtext_selector" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.basic_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.camview_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.container_widgets" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.detach_tabs" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.gcode_graphics" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.hal_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.jog_increments" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.joypad" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.led_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.nurbs_editor" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.overlay_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.simplewidgets_plugin" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.led_plugin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.hal_label_plugin" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.detach_tabs_plugin" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_progress_bar_plugin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.joypad_plugin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.nurbs_editor_plugin" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.web_widget_plugin" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.container_plugin" lines:[37, 38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.graphics_plugin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.widgets_plugin" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_led_plugin" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_label_plugin" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_label_plugin" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.actionbutton_plugin" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.dialog_plugin" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.overlay_plugin" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_slider_plugin" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_adjustment_bar_plugin" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.screenoptions_plugin" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.jogincrements_plugin" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.camview_plugin" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.toolbutton_plugin" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.versa_probe_plugin" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.basic_probe_plugin" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.tab_widget_plugin" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.virtualkeyboard_plugin" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_gauge_plugin" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.bar_plugin" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.round_gauge" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.round_progress" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.screen_options" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.simple_widgets" lines:[5, 6, 7, 8, 9, 10, 11, 12, 13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_output" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_input" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.xembed" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.radio_axis_selector" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.axis_tool_button" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.offset_tool_button" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.file_manager" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.image_switcher" lines:[21, 22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.machine_log" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.state_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.state_led" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.adjustment_bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.richtext_selector" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.status_label" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.status_slider" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.tab_widget" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.system_tool_button" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.action_tool_button" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.versa_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.virtualkeyboard" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.web_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.dro_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_line" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_history" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_touchy" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.gcode_editor" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.geditor" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.status_stacked" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.widget_switcher" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.origin_offsetview" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.tool_offsetview" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.macro_widget" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "linuxcnc" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "sys" lines:[1057] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "atexit" lines:[1058] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "subprocess" lines:[[[650], [666]], [[1067]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[[1147]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "importlib" lines:[[[[[190]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "resources" lines:[[[[[[191]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.screen_options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "importlib" lines:[[[432]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "qtvcp" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.simple_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.lib.aux_program_loader" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "sys" lines:[[1580]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "PyQt5.QtWidgets" lines:[[1581]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "qtvcp.widgets.action_button" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "sys" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "PyQt5.QtWidgets" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "sys" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "PyQt5.QtWidgets" lines:[[83]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.lib.aux_program_loader" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "sys" lines:[[390]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "PyQt5.QtWidgets" lines:[[391]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "hal" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "sys" lines:[[292]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "PyQt5.QtWidgets" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp.widgets.widget_baseclass" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "hal" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "PyQt5.QtCore" lines:[[7], [[10]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.dialogMixin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtWidgets" lines:[[459]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtCore" lines:[[460]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtGui" lines:[[461]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "qtvcp.core" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "sys" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: skipping "_thread" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.widgets.widget_baseclass" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.core" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "cv2" lines:[[45]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "sys" lines:[[572]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py: "sys" lines:[[359]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp.widgets.widget_baseclass" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.widget_baseclass" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.origin_offsetview" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.tool_offsetview" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.macro_widget" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.versa_probe" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.entry_widget" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.virtualkeyboard" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.calculator" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.machine_log" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.lib.notify" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.dialogMixin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.camview_widget" lines:[[[984]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "sys" lines:[[1925]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "PyQt5.QtWidgets" lines:[[1926]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "sys" lines:[[326]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "PyQt5.QtWidgets" lines:[[327]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "sys" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "PyQt5.QtWidgets" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.widgets.widget_baseclass" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "sys" lines:[[556]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.widgets.widget_baseclass" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.core" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.Qsci" lines:[[58]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtWidgets" lines:[[1137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtCore" lines:[[1138]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtGui" lines:[[1139]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qt5_graphics" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.widgets.widget_baseclass" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.core" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "sys" lines:[[511]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "PyQt5.QtWidgets" lines:[[512]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.gcode_editor" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.widget_baseclass" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtWidgets" lines:[[523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtCore" lines:[[524]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtGui" lines:[[525]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.widget_baseclass" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "sys" lines:[[216]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "PyQt5.QtWidgets" lines:[[217]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "sys" lines:[[375]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "PyQt5.QtWidgets" lines:[[376]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "sys" lines:[[195]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "qtvcp.widgets.widget_baseclass" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtCore" lines:[[22], [[25]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "sys" lines:[[655]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtWidgets" lines:[[656]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "sys" lines:[[242]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "PyQt5.QtWidgets" lines:[[243]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "sys" lines:[[133]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "PyQt5.QtWidgets" lines:[[134]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.entry_widget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.touchEntry" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "PyQt5" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "sys" lines:[[664]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.mdi_line" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtWidgets" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtCore" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtGui" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "sys" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: skipping "time" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.widgets.entry_widget" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.lib.aux_program_loader" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "sys" lines:[[330]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "PyQt5.QtWidgets" lines:[[331]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtWidgets" lines:[[393]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtCore" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtGui" lines:[[395]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "sys" lines:[[396]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: skipping "sys" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "gcode" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qt5_graphics" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp.core" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "sys" lines:[[202]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "PyQt5.QtWidgets" lines:[[203]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "PyQt5.QtWidgets" lines:[[516]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "sys" lines:[[387]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtWidgets" lines:[[388]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtCore" lines:[[389]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "time" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.widgets.probe_routines" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.widgets.widget_baseclass" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "sys" lines:[[64]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "PyQt5.QtWidgets" lines:[[65]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: skipping "sys" lines:[10] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "sys" lines:[[318]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "PyQt5.QtWidgets" lines:[[319]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "sys" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "PyQt5.QtWidgets" lines:[[294]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtWidgets" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtCore" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtGui" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "linuxcnc" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.xembed" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.message" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.notify" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.audio_player" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.preferences" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.machine_log" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "zmq" lines:[[[61]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "json" lines:[[[67]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[[[[[403]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.dialog_widget" lines:[[[511], [526], [536], [544], [552], [561], [580], [588], [597], [605], [613], [621], [630], [638], [646]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.overlay_widget" lines:[[[569]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.lib.aux_program_loader" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.core" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.simple_widgets" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "sys" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.widgets.led_widget" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "sys" lines:[[558]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "PyQt5.QtGui" lines:[[559]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.simple_widgets" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtWidgets" lines:[[785]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtCore" lines:[[786]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtGui" lines:[[787]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "sys" lines:[[789]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.core" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.qt_makegui" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.dialog_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "sys" lines:[[123]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "PyQt5.QtWidgets" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "PyQt5.QtWidgets" lines:[[587]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtWidgets" lines:[[268]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtCore" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtGui" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "sys" lines:[[271]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.widget_baseclass" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.dialogMixin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtWidgets" lines:[[593]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtCore" lines:[[594]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtGui" lines:[[595]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtWidgets" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtCore" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtGui" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebEngineWidgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebKitWidgets" lines:[[[[17]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.widgets.widget_baseclass" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.lib" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "PyQt5.QtWidgets" lines:[[137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "_togl" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "glnav" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "tkinter.dialog" lines:[[[209]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py: "rs274.interpret" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "rs274" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "itertools" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "glnav" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "hershey" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "gcode" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py: "gcode" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: "nf" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: skipping "sys" lines:[167] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: "configparser" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: skipping "sys" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: "stepconf" lines:[[[[221]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py: skipping "__main__" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py: "hal" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "pyvcp_widgets" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "rs274.OpenGLTk" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "hal" lines:[18, 25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "glnav" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "tkinter" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "pickle" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "nf" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "rs274.options" lines:[[13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "os" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py: "stdglue" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py: "remap" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: "qtvcp.widgets.file_manager" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "hal" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.core" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.lib.preferences" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.simple_widgets" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.simple_widgets" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.led_widget" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.widgets.dialog_widget" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.dialog_widget" lines:[11, 12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.nurbs_editor" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.toolbar_actions" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.core" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.keybindings" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.aux_program_loader" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.notify" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.dialog_widget" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.preferences" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.overlay_widget" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.tool_offsetview" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.dialog_widget" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.notify" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.geditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.status_label" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.state_led" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.bar" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.writer" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.keybindings" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcodes" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[13] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[286]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[297]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[291]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[452]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[457]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.auto_height.auto_height" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.writer" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcodes" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.aux_program_loader" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[450]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[455]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[466]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[470]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[475]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.gcode_editor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.file_manager" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.gcodes" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.action_button" lines:[5666] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.axis_tool_button" lines:[5667] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.camview_widget" lines:[5668] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.dro_widget" lines:[5669] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.file_manager" lines:[5670] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_editor" lines:[5671] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_graphics" lines:[5672] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.hal_label" lines:[5673] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.jog_increments" lines:[5674] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.led_widget" lines:[5675] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.machine_log" lines:[5676] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.mdi_history" lines:[5677] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.screen_options" lines:[5678] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.simple_widgets" lines:[5679] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_label" lines:[5680] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_slider" lines:[5681] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.system_tool_button" lines:[5682] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "hal" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.gcode_editor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.mdi_line" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.tool_offsetview" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.file_manager" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.writer" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcodes" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.simple_widgets" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[229]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[233]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[[[239]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[422]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[427]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.toolbar_actions" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py is not executable /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: `source [file join $::env(HALLIB_DIR) hal_procs_lib.tcl]' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: ` } else {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage is ${LINUXCNC_EMCSH-wish} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: invalid command: ${LINUXCNC_EMCSH-wish} /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: `if ([info exists env(LANG)]) {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl is ${LINUXCNC_EMCSH-emcsh} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: invalid command: ${LINUXCNC_EMCSH-emcsh} shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: /usr/scripts/rip-environment -> /usr/scripts/rip-environment (raw, not installed) shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git indexed by: /usr/bin/git -> git-core, /usr/games/git -> fakegit shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git -> /usr/bin/git -> git-core (via contents_index_bin) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' --- find-requires-deps 2024-07-13 09:07:07.707798768 +0000 +++ filter-requires-deps 2024-07-13 09:07:07.709798811 +0000 @@ -23,3 +23,3 @@ /usr/lib/python3/site-packages -/usr/scripts/rip-environment + coreutils @@ -180,3 +180,3 @@ tk -typelib(Cairo) + typelib(GLib) find-requires: FINDPACKAGE-COMMANDS: awk basename cat clear cp cut date dirname gcc git grep head ipcrm ln lsb_release mkdir mktemp ps pylupdate5 python3 readlink rm sleep sudo tclsh touch tty uname uptime wc wish xdpyinfo Provides: python3(_hal), python3(_togl), python3(bitfile), python3(bwidget), python3(filtertest) = set:edp3, python3(flowsnake) = set:edp3, python3(gcode), python3(gladevcp), python3(gladevcp.calculatorwidget), python3(gladevcp.combi_dro), python3(gladevcp.core), python3(gladevcp.drowidget), python3(gladevcp.gladebuilder), python3(gladevcp.gtk_action), python3(gladevcp.hal_actions), python3(gladevcp.hal_bar), python3(gladevcp.hal_dial), python3(gladevcp.hal_filechooser), python3(gladevcp.hal_graph), python3(gladevcp.hal_gremlin), python3(gladevcp.hal_gremlin_plus), python3(gladevcp.hal_lightbutton), python3(gladevcp.hal_mdihistory), python3(gladevcp.hal_meter), python3(gladevcp.hal_pyngcgui), python3(gladevcp.hal_pythonplugin), python3(gladevcp.hal_sourceview), python3(gladevcp.hal_widgets), python3(gladevcp.iconview), python3(gladevcp.jogwheel), python3(gladevcp.led), python3(gladevcp.macro_widget), python3(gladevcp.makepins), python3(gladevcp.offsetpage_widget), python3(gladevcp.offsetwidget), python3(gladevcp.overridewidget), python3(gladevcp.persistence), python3(gladevcp.speedcontrol), python3(gladevcp.state_label), python3(gladevcp.status_label), python3(gladevcp.tooledit_widget), python3(gladevcp.xembed), python3(gladevcp_makepins), python3(glnav), python3(gmoccapy), python3(gmoccapy.dialogs), python3(gmoccapy.getiniinfo), python3(gmoccapy.icon_theme_helper), python3(gmoccapy.notification), python3(gmoccapy.player), python3(gmoccapy.preferences), python3(gmoccapy.widgets), python3(gremlin), python3(gremlin_view), python3(gscreen), python3(gscreen.emc_interface), python3(gscreen.keybindings), python3(gscreen.mdi), python3(gscreen.preferences), python3(hal), python3(hal_glib), python3(hershey), python3(holecircle) = set:edp3, python3(involute) = set:edp3, python3(lineardeltakins), python3(linux_event), python3(linuxcnc), python3(linuxcnc_util), python3(multifilebuilder), python3(nf), python3(panels.cam_align.cam_align_handler) = set:ed3l, python3(panels.copy.copy_handler) = set:ed3l, python3(panels.qtplasmac_sim.qtplasmac_sim_handler) = set:ed3l, python3(panels.sim_panel.sim_panel_handler) = set:ed3l, python3(panels.spindle_belts.spindle_belts_handler) = set:ed3l, python3(panels.test_button.test_button_handler) = set:ed3l, python3(panels.test_dial.test_dial_handler) = set:ed3l, python3(panels.test_led.test_led_handler) = set:ed3l, python3(panels.test_panel.test_panel_handler) = set:ed3l, python3(panels.test_probe.test_probe_handler) = set:ed3l, python3(panels.tool_dialog.tool_dialog_handler) = set:ed3l, python3(panels.versaprobe.versaprobe_handler) = set:ed3l, python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler) = set:ed3l, python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler) = set:ed3l, python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler) = set:ed3l, python3(panels.vismach_millturn.vismach_millturn_handler) = set:ed3l, python3(panels.vismach_router_atc.vismach_router_atc_handler) = set:ed3l, python3(panels.vismach_scara.vismach_scara_handler) = set:ed3l, python3(plasmac.block), python3(plasmac.bolt_circle), python3(plasmac.circle), python3(plasmac.ellipse), python3(plasmac.gusset), python3(plasmac.line), python3(plasmac.polygon), python3(plasmac.rectangle), python3(plasmac.run_from_line), python3(plasmac.sector), python3(plasmac.slot), python3(plasmac.star), python3(plasmac.triangle), python3(pncconf), python3(pncconf.build_HAL), python3(pncconf.build_INI), python3(pncconf.data), python3(pncconf.pages), python3(pncconf.private_data), python3(pncconf.tests), python3(popupkeyboard), python3(propertywindow), python3(pyhal), python3(pyngcgui), python3(pyui), python3(pyui.commands), python3(pyui.master), python3(pyui.panelui_validate), python3(pyui.widgets), python3(pyvcp_widgets), python3(qt5_graphics), python3(qtvcp), python3(qtvcp.core), python3(qtvcp.lib), python3(qtvcp.lib.audio_player), python3(qtvcp.lib.auto_height.auto_height), python3(qtvcp.lib.aux_program_loader), python3(qtvcp.lib.colored_formatter), python3(qtvcp.lib.gcode_utility), python3(qtvcp.lib.gcode_utility.facing), python3(qtvcp.lib.gcode_utility.hole_circle), python3(qtvcp.lib.gcode_utility.hole_enlarge), python3(qtvcp.lib.gcodes), python3(qtvcp.lib.keybindings), python3(qtvcp.lib.machine_log), python3(qtvcp.lib.mdi_text), python3(qtvcp.lib.message), python3(qtvcp.lib.notify), python3(qtvcp.lib.preferences), python3(qtvcp.lib.qt_ngcgui.ngcgui), python3(qtvcp.lib.qt_pdf.PDFViewer), python3(qtvcp.lib.qt_vismach), python3(qtvcp.lib.qt_vismach.fanuc_200f), python3(qtvcp.lib.qt_vismach.gantry_5axis), python3(qtvcp.lib.qt_vismach.mill_xyz), python3(qtvcp.lib.qt_vismach.millturn), python3(qtvcp.lib.qt_vismach.primitives), python3(qtvcp.lib.qt_vismach.qt_vismach), python3(qtvcp.lib.qt_vismach.scara), python3(qtvcp.lib.qtplasmac), python3(qtvcp.lib.qtplasmac.conv_block), python3(qtvcp.lib.qtplasmac.conv_bolt), python3(qtvcp.lib.qtplasmac.conv_circle), python3(qtvcp.lib.qtplasmac.conv_ellipse), python3(qtvcp.lib.qtplasmac.conv_gusset), python3(qtvcp.lib.qtplasmac.conv_line), python3(qtvcp.lib.qtplasmac.conv_polygon), python3(qtvcp.lib.qtplasmac.conv_rectangle), python3(qtvcp.lib.qtplasmac.conv_sector), python3(qtvcp.lib.qtplasmac.conv_settings), python3(qtvcp.lib.qtplasmac.conv_slot), python3(qtvcp.lib.qtplasmac.conv_star), python3(qtvcp.lib.qtplasmac.conv_triangle), python3(qtvcp.lib.qtplasmac.conversational), python3(qtvcp.lib.qtplasmac.set_offsets), python3(qtvcp.lib.qtplasmac.tooltips), python3(qtvcp.lib.qtplasmac.updater), python3(qtvcp.lib.ripper.gcode_ripper), python3(qtvcp.lib.sys_notify), python3(qtvcp.lib.toolbar_actions), python3(qtvcp.lib.touchoff_subprogram), python3(qtvcp.lib.virtual_keyboard), python3(qtvcp.lib.writer), python3(qtvcp.lib.writer.ext), python3(qtvcp.lib.writer.ext.datetime), python3(qtvcp.lib.writer.ext.find), python3(qtvcp.lib.writer.ext.table), python3(qtvcp.lib.writer.ext.wordcount), python3(qtvcp.lib.writer.writer), python3(qtvcp.lib.xembed), python3(qtvcp.logger), python3(qtvcp.plugins), python3(qtvcp.plugins.actionbutton_plugin), python3(qtvcp.plugins.bar_plugin), python3(qtvcp.plugins.basic_probe_plugin), python3(qtvcp.plugins.camview_plugin), python3(qtvcp.plugins.container_plugin), python3(qtvcp.plugins.detach_tabs_plugin), python3(qtvcp.plugins.dialog_plugin), python3(qtvcp.plugins.graphics_plugin), python3(qtvcp.plugins.hal_label_plugin), python3(qtvcp.plugins.jogincrements_plugin), python3(qtvcp.plugins.joypad_plugin), python3(qtvcp.plugins.led_plugin), python3(qtvcp.plugins.nurbs_editor_plugin), python3(qtvcp.plugins.overlay_plugin), python3(qtvcp.plugins.qtvcp_plugin), python3(qtvcp.plugins.round_gauge_plugin), python3(qtvcp.plugins.round_progress_bar_plugin), python3(qtvcp.plugins.screenoptions_plugin), python3(qtvcp.plugins.simplewidgets_plugin), python3(qtvcp.plugins.state_label_plugin), python3(qtvcp.plugins.state_led_plugin), python3(qtvcp.plugins.status_adjustment_bar_plugin), python3(qtvcp.plugins.status_label_plugin), python3(qtvcp.plugins.status_slider_plugin), python3(qtvcp.plugins.tab_widget_plugin), python3(qtvcp.plugins.toolbutton_plugin), python3(qtvcp.plugins.versa_probe_plugin), python3(qtvcp.plugins.virtualkeyboard_plugin), python3(qtvcp.plugins.web_widget_plugin), python3(qtvcp.plugins.widgets_plugin), python3(qtvcp.qt_action), python3(qtvcp.qt_istat), python3(qtvcp.qt_makegui), python3(qtvcp.qt_makepins), python3(qtvcp.qt_pstat), python3(qtvcp.qt_tstat), python3(qtvcp.qtvcp_handler), python3(qtvcp.widgets), python3(qtvcp.widgets.action_button), python3(qtvcp.widgets.action_button_round), python3(qtvcp.widgets.action_tool_button), python3(qtvcp.widgets.adjustment_bar), python3(qtvcp.widgets.axis_tool_button), python3(qtvcp.widgets.bar), python3(qtvcp.widgets.basic_probe), python3(qtvcp.widgets.calculator), python3(qtvcp.widgets.camview_widget), python3(qtvcp.widgets.container_widgets), python3(qtvcp.widgets.detach_tabs), python3(qtvcp.widgets.dialogMixin), python3(qtvcp.widgets.dialog_widget), python3(qtvcp.widgets.dro_widget), python3(qtvcp.widgets.entry_widget), python3(qtvcp.widgets.fake_status), python3(qtvcp.widgets.file_manager), python3(qtvcp.widgets.gcode_editor), python3(qtvcp.widgets.gcode_graphics), python3(qtvcp.widgets.geditor), python3(qtvcp.widgets.general_hal_input), python3(qtvcp.widgets.general_hal_output), python3(qtvcp.widgets.hal_label), python3(qtvcp.widgets.hal_selectionbox), python3(qtvcp.widgets.image_switcher), python3(qtvcp.widgets.jog_increments), python3(qtvcp.widgets.joypad), python3(qtvcp.widgets.led_widget), python3(qtvcp.widgets.machine_log), python3(qtvcp.widgets.macro_widget), python3(qtvcp.widgets.mdi_history), python3(qtvcp.widgets.mdi_line), python3(qtvcp.widgets.mdi_touchy), python3(qtvcp.widgets.nurbs_editor), python3(qtvcp.widgets.offset_tool_button), python3(qtvcp.widgets.origin_offsetview), python3(qtvcp.widgets.overlay_widget), python3(qtvcp.widgets.probe_routines), python3(qtvcp.widgets.probe_subprog), python3(qtvcp.widgets.qtvcp_icons), python3(qtvcp.widgets.radio_axis_selector), python3(qtvcp.widgets.richtext_selector), python3(qtvcp.widgets.round_gauge), python3(qtvcp.widgets.round_progress), python3(qtvcp.widgets.runFromLine_dialog), python3(qtvcp.widgets.screen_options), python3(qtvcp.widgets.simple_widgets), python3(qtvcp.widgets.state_label), python3(qtvcp.widgets.state_led), python3(qtvcp.widgets.status_label), python3(qtvcp.widgets.status_slider), python3(qtvcp.widgets.status_stacked), python3(qtvcp.widgets.stylesheeteditor), python3(qtvcp.widgets.system_tool_button), python3(qtvcp.widgets.tab_widget), python3(qtvcp.widgets.tool_offsetview), python3(qtvcp.widgets.touchEntry), python3(qtvcp.widgets.versa_probe), python3(qtvcp.widgets.virtualkeyboard), python3(qtvcp.widgets.web_widget), python3(qtvcp.widgets.widget_baseclass), python3(qtvcp.widgets.widget_switcher), python3(qtvcp.widgets.xembed), python3(rotarydeltakins), python3(rs274), python3(rs274.OpenGLTk), python3(rs274.author), python3(rs274.glcanon), python3(rs274.interpret), python3(rs274.options), python3(screens.blender.blender_handler) = set:ed3l, python3(screens.qt_cnc.qt_cnc_handler) = set:ed3l, python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler) = set:ed3l, python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler) = set:ed3l, python3(screens.qtaxis.qtaxis_handler) = set:ed3l, python3(screens.qtdragon.qtdragon_handler) = set:ed3l, python3(screens.qtdragon_hd.qtdragon_hd_handler) = set:ed3l, python3(screens.qtlathe.qtlathe_handler) = set:ed3l, python3(screens.qtplasmac.languages.qtplasmac) = set:ed3l, python3(screens.qtplasmac.qtplasmac_handler) = set:ed3l, python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler) = set:ed3l, python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler) = set:ed3l, python3(screens.qttouchy.qttouchy_handler) = set:ed3l, python3(screens.tester.tester_handler) = set:ed3l, python3(screens.woodpecker.woodpecker_handler) = set:ed3l, python3(screens.x1mill.x1mill_handler) = set:ed3l, python3(stepconf), python3(stepconf.build_HAL), python3(stepconf.build_INI), python3(stepconf.import_mach), python3(stepconf.pages), python3(tooldb), python3(touchy), python3(touchy.emc_interface), python3(touchy.filechooser), python3(touchy.hal_interface), python3(touchy.listing), python3(touchy.mdi), python3(touchy.preferences), python3(vcpparse), python3(vismach), tcl(Hal), tcl(Hal)-1 = 1.0, tcl(Linuxcnc), tcl(Linuxcnc)-1 = 1.0, tcl(Ngcgui), tcl(Ngcgui)-1 = 1.0, tcl(Ngcguittt), tcl(Ngcguittt)-1 = 1.0 Requires: liblinuxcnc = 2.9.2-alt4.20240203, libGLU, python3-module-PyQt5-devel, libgtksourceview3-gir, libX11-devel, tclx, tcl-blt, python3(Xlib) < 0, python3(PyQt5.Qsci) < 0, /bin/bash, /bin/sh, /lib/ld-linux.so.2, /usr/bin/env, /usr/bin/python3, /usr/bin/python3.12, /usr/bin/tclsh, /usr/bin/tclsh8.6, /usr/bin/wish, /usr/bin/wish8.6, /usr/lib/python3/site-packages, coreutils, gawk, gcc-common, git-core, grep, libX11.so.6 >= set:oja5r3qabUpLHlTcdkK7Ymnta6aWUK6qURI2aereyuySbaY9Y9rRf80, libXinerama.so.1 >= set:hfyH4K6, libXmu.so.6 >= set:lktel, libboost_python312.so.1.85.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.2.3), libc.so.6(GLIBC_2.27), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.7), libc.so.6(GLIBC_2.8), libcairo.so.2 >= set:miBeiC9UuDqAUQ1bepgkhH08f6m87ljhFbj6, libepoxy.so.0 >= set:plG6OtaOh21hPpoEbYgihHZ0wsB7PrHp7He0, libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgdk-3.so.0 >= set:nkZ5ndiwLew01gu7UA, libgdk-x11-2.0.so.0 >= set:njH9A3kDQ0iQRBflIP1zlE5TpwDZsPmjGbQ, libglib-2.0.so.0 >= set:olyg8bKheHPr7MU1, libgobject-2.0.so.0 >= set:mjQCdZlc930HMK1, libgtk-3.so.0 >= set:qjjZoCF3lFXh6tMGe5LNfHjmYeZBthRtN41TeIZzjgwWOrHiSh2NZBTl9RaGCZcaZtsSDoklAfoY3jZqdwNTjVxluts4fzptNZoObnMXHUBHYRt39LkeFCpeX0XGSNmA8AjwtwC5hgzieP0K2oI8aJb3kDhZ4iVp7IxwWvgRbyDTqaJhAOTD2Fv8g9yPZ6NOuGRIGtqP9FiPwZfRTshMUVUTNtViaQgX5ndOGrJMiFzxXDm6AW3HZBRN91ZxbqL4uj5Pt3embDjf1R8JsH7xQTCBVCxMfYTOJIZFI9ZbiGb6GLX0FyKvWxZH06khJ56lr41PV7VxkpV7CX5AN30dAgkjASU69WAU20ZKQEW5CdLKnYV6PQaWR9Q2d4, libgtk-x11-2.0.so.0 >= set:pijZofB1Sac1HWm6UJI4cT7ZgTZ5cu7LyBFNQFMTkKvPsM6syJWtgE6gCt8VZC2002Yr6O3qpMKORxMYFpGbygZwTFmPjEBmkFK5tZ9puR8V4nvNqcMb9Q8ET5Z5nwuEj7uZbKfI69aHIIc6AKSdSXr1KNVy75UzoI60weGwIZrr62BMCZ1BOfXpj2M6ZjtlXi25ghyZccTXY7GXsFuvoeSJ3yKQFbX9A7iCzUEYa6aZ04fAonLTJJ2yQZ7HcxVrWamaKGUdBx8Y99PalB5dPYDzTFF762xI20, liblinuxcnchal.so.0 >= set:kdPx99okMC0Dz1625MawlIfquO3JZ3ZIUi5Jl7M43uZ4jrJfiRqxZ2hezaWOwqo8jNxXb4PXA5GbMGAP8gNN7e5Z7F9EPZhr3lvZ8aQw6VY2Cu2agoAmBmnw7UQIPmWiMLuqjUJnhudWalGzhjgU7, liblinuxcncini.so.0 >= set:jf3pACnRkFYa1jK9dmLdZcAMQZdkP4S54W3, libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libmodbus.so.5 >= set:kf4sxmJBcjkoYXJ6nZ8w1f3UAmWo529bNQO9HdZ6GfYWQgMVJKZenaurI1UX4, libnml.so.0 >= set:nhHZFI3kBS0Ma7l8Tbc7NDAj0cVe7YpJAecK8HiAlVmUFIacmYZAgNKb7AgZ9o3YcwI77x8lKghWwBp3R3aHXufreVgSJOcHDIMmg3FTiWGgZDSqajrVXGCmzmwK9kEnrrZAXgB, libpango-1.0.so.0 >= set:miqUTrpg55DU675j31iPjU59gVL2, libpangocairo-1.0.so.0 >= set:jiZ1Z0, libposemath.so.0 >= set:mhNqbLmit1h1SKAkf3R8yKzITkH51qlNb2mXMvLIbzYdLSZ1Pn3dvFo360T4Ym3VUZ06J9T65VCYVK5, libpyplugin.so.0 >= set:ifB9gZhMHZs51, libpython3.12.so.1.0 >= set:oipCiruqzTeZzb6nQEDgYmcycRwVJdbZ5iXKYZiJODaguD1Z09heVWM4C62R9XS3UbkznKwtFB0v3EX8wxJskhoMjZnQOps91h0gXMB2zZ0ZiESnuTSI6RauE3xO1AePZyWlNaBQhCb27NyC2QiQiNF0zEU1FA9BQnlAid, libreadline.so.8 >= set:njCJKlFcmgU8mvL3SqZmyq3ZFmIppb, librs274.so.0 >= set:oklu8nstiJF4gERvmYKLZu2B25LRi2g8GwakLmkAhIVMce, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.14), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.20), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtk8.6.so >= set:mh48jtZxaNUhMsSfBJ4AXC6RIwDmyqFM8nd9l1ee9PQ0ud0, libtooldata.so.0 >= set:ieCH2SkPFzG4BeSHWNfZwfGC1oYUwSluc7, libudev.so.1 >= set:kgKhqJ5KQ3IrBeCbBEkBBomRh1RpLFAx211, libudev.so.1(LIBUDEV_183), libusb-1.0.so.0 >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu, lsb-release, procps, python3, python3(OpenGL) < 0, python3(OpenGL.GL) < 0, python3(OpenGL.GLU) < 0, python3(OpenGL.raw.GLX._types) < 0, python3(PyQt5) < 0, python3(PyQt5.QtCore) < 0, python3(PyQt5.QtDesigner) < 0, python3(PyQt5.QtGui) < 0, python3(PyQt5.QtPrintSupport) < 0, python3(PyQt5.QtWidgets) < 0, python3(__future__) < 0, python3(array) < 0, python3(binascii) < 0, python3(cairo) < 0, python3(collections) < 0, python3(configobj) < 0, python3(configparser) < 0, python3(copy) < 0, python3(ctypes) < 0, python3(datetime) < 0, python3(dbus) < 0, python3(decimal) < 0, python3(enum) < 0, python3(fcntl) < 0, python3(fnmatch) < 0, python3(functools) < 0, python3(getopt) < 0, python3(gettext) < 0, python3(gi) < 0, python3(gi.repository) < 0, python3(glob) < 0, python3(hashlib) < 0, python3(importlib) < 0, python3(inspect) < 0, python3(json) < 0, python3(locale) < 0, python3(logging) < 0, python3(math) < 0, python3(mimetypes) < 0, python3(numpy) < 0, python3(numpy.core) < 0, python3(operator) < 0, python3(optparse) < 0, python3(os) < 0, python3(pickle) < 0, python3(random) < 0, python3(re) < 0, python3(readline) < 0, python3(select) < 0, python3(serial) < 0, python3(shutil) < 0, python3(signal) < 0, python3(socket) < 0, python3(string) < 0, python3(struct) < 0, python3(subprocess) < 0, python3(tarfile) < 0, python3(tempfile) < 0, python3(textwrap) < 0, python3(threading) < 0, python3(tkinter) < 0, python3(traceback) < 0, python3(types) < 0, python3(uuid) < 0, python3(validate) < 0, python3(warnings) < 0, python3(webbrowser) < 0, python3(xml.dom.minidom) < 0, python3(xml.etree.ElementPath) < 0, python3(xml.etree.ElementTree) < 0, python3(yapps) < 0, python3.12-ABI, rtld(GNU_HASH), sudo, tcl, tcl(BWidget), tcl(Tk), tcl(Tk)-8 >= 8.0, termutils, tk, typelib(GLib), typelib(GObject), typelib(Gdk), typelib(GdkPixbuf), typelib(GdkX11), typelib(Gio), typelib(Gst), typelib(Gtk), typelib(GtkSource), typelib(Notify), typelib(Pango), typelib(PangoCairo), typelib(Vte), util-linux, xdpyinfo Requires(rpmlib): rpmlib(SetVersions) Obsoletes: linuxcnc-data <= 2.9.2-alt4.20240203 Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.pMW39g Creating linuxcnc-debuginfo package Processing files: liblinuxcnc-devel-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.1GSFs6 find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.CFdJAP find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/modal_state.hh:25:10: fatal error: vector: No such file or directory 25 | #include | ^~~~~~~~ compilation terminated. cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh: cpp failed, trying c++ mode /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh: cpp failed /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh:19:10: fatal error: rpc/rpc.h: No such file or directory 19 | #include /* struct XDR */ | ^~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h:24: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h:20: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h:34: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h:33: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h:40: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h: cpp failed In file included from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/object_fwd.hpp:8, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh:27: /usr/include/boost/python/detail/wrap_python.hpp:57:11: fatal error: pyconfig.h: No such file or directory 57 | # include | ^~~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh: cpp failed ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.2-alt4.20240203, /usr/lib/liblinuxcnchal.so.0, /usr/lib/liblinuxcncini.so.0, /usr/lib/libnml.so.0, /usr/lib/libposemath.so.0, /usr/lib/libpyplugin.so.0, /usr/lib/librs274.so.0, /usr/lib/libtooldata.so.0, boost-devel-headers Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.gV3een Processing files: liblinuxcnc-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.orIY5Y find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0: 119 symbols, 17 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcncini.so.0: 35 symbols, 16 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libnml.so.0: 836 symbols, 20 bpp warning: hash collision: _ZN3NML12format_inputEP6NMLmsg count_characters_in_print_list lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libposemath.so.0: 415 symbols, 19 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libpyplugin.so.0: 23 symbols, 15 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/librs274.so.0: 2001 symbols, 21 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libtooldata.so.0: 21 symbols, 15 bpp Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.Dt4mVX find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: liblinuxcnchal.so.0 = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2, liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0asicGtuLE4gybs3y3xrdiX5sUZF8fYcJwt5n6cHwC9uugXsgXzIEqrO1, libnml.so.0 = set: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, libposemath.so.0 = set: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, libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxifLv4LPqR15xNTYNE5, librs274.so.0 = set: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, libtooldata.so.0 = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Requires: libboost_python312.so.1.85.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNMTMqzp5SpoxPKmKTnJQMFAsJFEsRmPay8ShKyIWTYmDlS1gvFDLHEZsgr00wZHvnfuR7cmY40PURuzx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.9), libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_4.0.0), libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libpython3.12.so.1.0 >= set:oi0GOBAUI3x9Zm2hWASt1vZ3R4nYYfA4VAH3joq8Yna2GUTvbSg3QBmBWdwKz06SOh5x1fxZEHbvodwVQDokPlMCfIgsrE3xO1AuPv374qZiTjyQZcRdeSUEtPaaoPfwkCRbdyfJ0, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.5), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.18), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.26), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtirpc.so.3 >= set:miLQRMTfkMBlyKlAtNseOZekznKvK3HZEZCwnOh, libtirpc.so.3(TIRPC_0.3.0), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.KIz3NF Creating liblinuxcnc-debuginfo package Processing files: linuxcnc-debuginfo-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.Gmcxy8 find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.FLhORd find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.2-alt4.20240203, /usr/lib/debug/lib/ld-linux.so.2.debug, debug(libX11.so.6), debug(libXinerama.so.1), debug(libXmu.so.6), debug(libboost_python312.so.1.85.0), debug(libc.so.6), debug(libcairo.so.2), debug(libepoxy.so.0), debug(libgcc_s.so.1), debug(libgdk-3.so.0), debug(libgdk-x11-2.0.so.0), debug(libglib-2.0.so.0), debug(libgobject-2.0.so.0), debug(libgtk-3.so.0), debug(libgtk-x11-2.0.so.0), debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libm.so.6), debug(libmodbus.so.5), debug(libnml.so.0), debug(libpango-1.0.so.0), debug(libpangocairo-1.0.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(libpython3.12.so.1.0), debug(libreadline.so.8), debug(librs274.so.0), debug(libstdc++.so.6), debug(libtk8.6.so), debug(libtooldata.so.0), debug(libudev.so.1), debug(libusb-1.0.so.0) Processing files: liblinuxcnc-debuginfo-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.GSREMQ find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.DAmzhO find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libnml.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(librs274.so.0), debug(libtooldata.so.0) Requires: liblinuxcnc = 2.9.2-alt4.20240203, debug(libboost_python312.so.1.85.0), debug(libc.so.6), debug(libgcc_s.so.1), debug(libm.so.6), debug(libpython3.12.so.1.0), debug(libstdc++.so.6), debug(libtirpc.so.3) Adding to liblinuxcnc-devel a strict dependency on linuxcnc Adding to linuxcnc a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on linuxcnc Adding to liblinuxcnc-debuginfo a strict dependency on liblinuxcnc Adding to liblinuxcnc-devel a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on liblinuxcnc-debuginfo Removing from linuxcnc-debuginfo 47 sources provided by liblinuxcnc-debuginfo also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/emc/pythonplugin also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/cms also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/linklist also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/nml also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/os_intf also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/posemath also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/rcs Removing 7 extra deps from linuxcnc due to dependency on liblinuxcnc Removing 7 extra deps from liblinuxcnc-devel due to dependency on liblinuxcnc Removing 7 extra deps from linuxcnc-debuginfo due to dependency on liblinuxcnc-debuginfo Removing 1 extra deps from liblinuxcnc-devel due to repentancy on linuxcnc Removing 31 extra deps from linuxcnc due to repentancy on liblinuxcnc Removing 6 extra deps from linuxcnc-debuginfo due to repentancy on liblinuxcnc-debuginfo Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-2.9.2-alt4.20240203.i586.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-devel-2.9.2-alt4.20240203.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-2.9.2-alt4.20240203.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm (w2T16.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm (w2T16.xzdio) 370.72user 188.11system 3:07.13elapsed 298%CPU (0avgtext+0avgdata 417104maxresident)k 0inputs+0outputs (0major+23504004minor)pagefaults 0swaps 6.76user 4.47system 4:14.56elapsed 4%CPU (0avgtext+0avgdata 128840maxresident)k 2864inputs+0outputs (0major+402614minor)pagefaults 0swaps --- linuxcnc-2.9.2-alt4.20240203.i586.rpm.repo 2024-05-13 20:46:30.000000000 +0000 +++ linuxcnc-2.9.2-alt4.20240203.i586.rpm.hasher 2024-07-13 09:07:55.904846244 +0000 @@ -3,5 +3,2 @@ /etc/linuxcnc/rtapi.conf 100644 root:root -/lib/udev/rules.d/99-shuttle.rules 100644 root:root -/lib/udev/rules.d/99-xhc-whb04b-6.rules 100644 root:root -/lib/udev/rules.d/99-xhc.rules 100644 root:root /usr/bin/5axisgui 100755 root:root @@ -1559,2 +1556,5 @@ /usr/lib/tcl/linuxcnc/twopass.tcl 100755 root:root +/usr/lib/udev/rules.d/99-shuttle.rules 100644 root:root +/usr/lib/udev/rules.d/99-xhc-whb04b-6.rules 100644 root:root +/usr/lib/udev/rules.d/99-xhc.rules 100644 root:root /usr/share/applications/linuxcnc-documentation.desktop 100644 root:root @@ -6595,3 +6595,2 @@ Requires: /lib/ld-linux.so.2 -Requires: /lib/udev/rules.d Requires: /usr/bin/env @@ -7066,6 +7065,3 @@ File: /etc/linuxcnc 40755 root:root -File: /etc/linuxcnc/rtapi.conf 100644 root:root e366891e6e974014c28a8d3194b15a42 -File: /lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 -File: /lib/udev/rules.d/99-xhc-whb04b-6.rules 100644 root:root 60e76d18df49546cf854520b098e84b6 -File: /lib/udev/rules.d/99-xhc.rules 100644 root:root ea967e8257c8c919194e447b5fc01854 +File: /etc/linuxcnc/rtapi.conf 100644 root:root f1112a0a703fd6939f60148f7618f8c0 File: /usr/bin/5axisgui 100755 root:root f3826864e742d63df97b023e93a83803 @@ -7366,3 +7362,3 @@ File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root 43f345c2ed09f543a9e08debcbac1505 -File: /usr/lib/linuxcnc/realtime 100755 root:root 0ccd69508443f056e1dba2a7d5af2a03 +File: /usr/lib/linuxcnc/realtime 100755 root:root 0c16a26a5f89298fc5c2894d09244424 File: /usr/lib/python3/site-packages/__pycache__ 40755 root:root @@ -8623,2 +8619,5 @@ File: /usr/lib/tcl/linuxcnc/twopass.tcl 100755 root:root ea30d528a2d7e11d7ce8424edab7e097 +File: /usr/lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 +File: /usr/lib/udev/rules.d/99-xhc-whb04b-6.rules 100644 root:root 60e76d18df49546cf854520b098e84b6 +File: /usr/lib/udev/rules.d/99-xhc.rules 100644 root:root ea967e8257c8c919194e447b5fc01854 File: /usr/share/applications/linuxcnc-documentation.desktop 100644 root:root d8c66d123b76d7f0a19ce7516df2b149 @@ -12366,3 +12365,3 @@ File: /usr/share/man/man1/panelui.1.xz 100644 root:root 61f547f5665fc80d03da476743e17d4d -File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 7de5f029ade41393fd3cf2562a6db59c +File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 7013532f7de765e6c7c97359f5833d4e File: /usr/share/man/man1/pmx485-test.1.xz 100644 root:root 20b815b28f4df48358282e8d88b3a0fa @@ -12395,3 +12394,3 @@ File: /usr/share/man/man1/teach-in.1.xz 100644 root:root fc226b9d2b564e3fad4c5ff0b945c813 -File: /usr/share/man/man1/thermistor.1.xz 100644 root:root a1c7078539fd4e52b1abe57c6257927a +File: /usr/share/man/man1/thermistor.1.xz 100644 root:root fed62396a804c8533fdf8124fe892aef File: /usr/share/man/man1/tooledit.1.xz 100644 root:root c7d86f1ec43340e80f69de9a88166fd8 @@ -12401,3 +12400,3 @@ File: /usr/share/man/man1/vfs11_vfd.1.xz 100644 root:root 65395473fdddbe5a7f8789b49d8b6b37 -File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root 59cbe4f4431cf25ad5a96a4870e45c7c +File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root 4a1e8ce35730093626fd4927db9fc0fb File: /usr/share/man/man1/xhc-hb04-accels.1.xz 100644 root:root 0cff8637e027604edb6d81ff9beaa4ff @@ -12522,44 +12521,44 @@ File: /usr/share/man/man3/undocumented.3rtapi.xz 100644 root:root 002b721b89292b438d9dbf89f1ff823b -File: /usr/share/man/man9/abs.9.xz 100644 root:root f3efc395569d9ab482cd66b3720b089b -File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root b60ef47dee40b0338549862b6d285343 -File: /usr/share/man/man9/and2.9.xz 100644 root:root 7a2bf674f1e837c2a4e8a84a86eab1b5 -File: /usr/share/man/man9/anglejog.9.xz 100644 root:root eda43fad75022b2acfb0bc0f0374952f +File: /usr/share/man/man9/abs.9.xz 100644 root:root deb50a9b9741dba3ec8c9d0fdd31c927 +File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root cf0041d61df64489ce14d419c1ba5866 +File: /usr/share/man/man9/and2.9.xz 100644 root:root d660283dfddc587ee714815613e36190 +File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 26342140bca6319e22c497b309acccfc File: /usr/share/man/man9/at_pid.9.xz 100644 root:root d578fa506b91fa3aa94136679b39f656 File: /usr/share/man/man9/axis.9.xz 100644 root:root f688c161a447b4d64af5406eaa4b3c09 -File: /usr/share/man/man9/axistest.9.xz 100644 root:root deb6916f1864bca7673f91e918813a34 -File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 64cd7c45e77796abf90ff5e8ddc8c51b -File: /usr/share/man/man9/biquad.9.xz 100644 root:root 2a1f7d726b14675e48c9f63bc41f66a5 -File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 1805182effddc2393c3ccefaa7b0daef -File: /usr/share/man/man9/bitwise.9.xz 100644 root:root a7ac8d53f4fa8f8245f8613a455ea714 -File: /usr/share/man/man9/bldc.9.xz 100644 root:root bf581822647f245319fcc3a6cf6601f6 -File: /usr/share/man/man9/blend.9.xz 100644 root:root 1fdc1036fe032cb8a0be13b18ef44e7c -File: /usr/share/man/man9/carousel.9.xz 100644 root:root 5bcf60228c7fa47b9515be6dc4549b32 -File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root a6a3ce5c35f1f87b74e0c4dd094f2ab3 -File: /usr/share/man/man9/clarke2.9.xz 100644 root:root d6a996e52abfd314f75476255a401c2b -File: /usr/share/man/man9/clarke3.9.xz 100644 root:root 0de69bf7cfe3c1c4182a833f8edbdc44 -File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 501d73a7736420b88a4de5c906dc1293 +File: /usr/share/man/man9/axistest.9.xz 100644 root:root e6e723c1bbceb8b6acce2cba3674bd93 +File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 4c34aaea85e6758fc20eb32a10751cb8 +File: /usr/share/man/man9/biquad.9.xz 100644 root:root e521b39a29a4217b09a0a7ed6c7582c8 +File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 7100999195a7c059d64381338e6f4eae +File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 62643c91065005abaab2d41e354e8d2d +File: /usr/share/man/man9/bldc.9.xz 100644 root:root ed1f4b2584b8b8808a149915f34d6ead +File: /usr/share/man/man9/blend.9.xz 100644 root:root 806709ae459eccc88a978ce9fee698ab +File: /usr/share/man/man9/carousel.9.xz 100644 root:root 46876ee5f3ae6a138a8775dd33546d60 +File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root 82305c40e75d485b510a10e8318c9ea2 +File: /usr/share/man/man9/clarke2.9.xz 100644 root:root e6490ba22d337389453246c939d6b53e +File: /usr/share/man/man9/clarke3.9.xz 100644 root:root e3b51beed68992e55fff1adbe7d3fdaa +File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 5dc4251dd3160d320b349f1724b8a36c File: /usr/share/man/man9/classicladder.9.xz 100644 root:root 0a15b834496451ff9a41f7297f36b0f0 -File: /usr/share/man/man9/comp.9.xz 100644 root:root 6ab3f4a862d89105b196b15f26bc34a9 -File: /usr/share/man/man9/constant.9.xz 100644 root:root a25a5ec9c7140d8ea966c4a914a8c40c -File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 820136efe18baca23952e2deed616426 -File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root e9baca78bf883d30dbfbd351fe0367b1 -File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root b79d0f4494b9789f4df60cdc74bbcac1 -File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 5b8b9b0079c35d3a08280c0cc800a4e5 -File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root e6768b695ff82d7207d25fb377fa316b -File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root f026baa3d5f21f8a499091c7b5967941 -File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 14275d3cd9c4a85b86e7fe9f0fef11f8 -File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 6dc8db977040b412999a96927a537d0a -File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root aa1ca0f7a7d17395d757719a4c63e649 -File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 3419312e54e11bae75616f1a8e76e825 -File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 98403e3c5d04e49f50be21e59e3539b7 -File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root 9af5edbe17dfc307c7e0a0bf4f125b0d +File: /usr/share/man/man9/comp.9.xz 100644 root:root aa8d0a8c7d8d8e2e3e31325030e76110 +File: /usr/share/man/man9/constant.9.xz 100644 root:root d523f05f544015c0db04c46980a27003 +File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 6c4db79a7562215d3edd7562a483d083 +File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root c73c796f423cc8ea42c83bc8ea38b236 +File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root aed684b12b1352babad232bc02c9b9f0 +File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root b801f7e84e9b2854b64df4b56d822f88 +File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root f1caebde1b4f14485867e5237f1e449a +File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 81f6d51578cb62f0088f1b5dd773650b +File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root de186178d5550ca744d657bb92c7a572 +File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 11b21af28f8aa7d16a6fbd8e0a30ad4b +File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root b33c6b2c746c711701b78809e4924402 +File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 97311f343e6e34d2f73b56c1963b92a3 +File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 289327342e1a79333d72e7e9483ab20a +File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root 2a8497c071d05d1eaf4aeb114e9d1b43 File: /usr/share/man/man9/counter.9.xz 100644 root:root 83f81a48047a93aac54a70c298a8b8ee -File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 45ccd61803769c5504ad6fe779614146 -File: /usr/share/man/man9/ddt.9.xz 100644 root:root cef8763804bac8f721f5b6892d60d4cb -File: /usr/share/man/man9/deadzone.9.xz 100644 root:root f171a0e488252245bed869e802025aca +File: /usr/share/man/man9/dbounce.9.xz 100644 root:root e042001fde5dc694d4ed8339596d7c96 +File: /usr/share/man/man9/ddt.9.xz 100644 root:root 61cad583cb39c39da5dc22367f9d3128 +File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 71b8e7b38a16cee8572645008d9a14c7 File: /usr/share/man/man9/debounce.9.xz 100644 root:root bd2406b69a89bf1c3ef92b42bfe93f3d -File: /usr/share/man/man9/demux.9.xz 100644 root:root c9a535891e4c1e58065badfade6eec32 -File: /usr/share/man/man9/differential.9.xz 100644 root:root e4985e062a6944294a19dd211aa71d21 -File: /usr/share/man/man9/div2.9.xz 100644 root:root 3a8d698b8c46baa3ec7c5932f1a1d47a -File: /usr/share/man/man9/edge.9.xz 100644 root:root a7aa84fd6df61a48ab79ffb0f5ae305e +File: /usr/share/man/man9/demux.9.xz 100644 root:root 2c62d4c390e7c156f41535740c3f5f3e +File: /usr/share/man/man9/differential.9.xz 100644 root:root a76efc5dd55e3f5b37acde4cd803f566 +File: /usr/share/man/man9/div2.9.xz 100644 root:root 77c8b2a8410c7b776532b057665a7b1d +File: /usr/share/man/man9/edge.9.xz 100644 root:root f33c06e915a6e2694a738348c8f238ed File: /usr/share/man/man9/encoder.9.xz 100644 root:root 12631bc793eb57261edeccfb1868447a @@ -12567,10 +12566,10 @@ File: /usr/share/man/man9/enum.9.xz 100644 root:root 62f690eb508746219767ca8b28c87f7d -File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 19cb9e5443754171d6fc6e857a71e28c -File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root f57c3b16feb8cc3432eb4095897cda2f -File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root e245b208fdf759724ad1483e44262c31 -File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root b969670d5beec87ea12674f047ade254 -File: /usr/share/man/man9/flipflop.9.xz 100644 root:root f3a0b21439dece1927284ed0aa205d83 -File: /usr/share/man/man9/gantry.9.xz 100644 root:root f9f6cc6ca8ac28b36133d27f9870e406 +File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 5a6c81fbb704b9338d5f83d7e410267c +File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root e5f7268b888da64ec4729029a9236ee2 +File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 8e67220af75d43406d20c677a0a099d7 +File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 1cb42ea56b8ec70abee21e54191596cc +File: /usr/share/man/man9/flipflop.9.xz 100644 root:root cca3f90b7fd31f14937a4a645749d0cb +File: /usr/share/man/man9/gantry.9.xz 100644 root:root 6eb1787c00f3932ab2d0570a88abbea1 File: /usr/share/man/man9/gantrykins.9.xz 100644 root:root a388b2c041c10d2e154213b6a190d69e -File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 88ca904d74a148baf539a70a42b68566 +File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 8c2e8f9285b580bc376619914a0defba File: /usr/share/man/man9/genhexkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12579,6 +12578,6 @@ File: /usr/share/man/man9/gladevcp.9.xz 100644 root:root 26d85cce38cef8e5cee1a6845d897b4d -File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 669f10a58826e1abd9514ad99b297a91 +File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 3b7a09204c9c247240dd3b5983212351 File: /usr/share/man/man9/hal_bb_gpio.9.xz 100644 root:root b8610c3245eb6a6a34b2071dae79effe File: /usr/share/man/man9/hal_parport.9.xz 100644 root:root 0e9862dfa7a66f23eff384631bc10a25 -File: /usr/share/man/man9/histobins.9.xz 100644 root:root 3aa235022f17b932452af5c91c36006e +File: /usr/share/man/man9/histobins.9.xz 100644 root:root 47edb87f5a1d1d65a3e840a8f137b491 File: /usr/share/man/man9/hm2_7i43.9.xz 100644 root:root ec628cb4aadd965825a78075995c1e2e @@ -12589,54 +12588,54 @@ File: /usr/share/man/man9/hm2_spi.9.xz 100644 root:root 382b4ac9c860f7945c061b1e9bd15cdf -File: /usr/share/man/man9/homecomp.9.xz 100644 root:root c6e137e3b51a3ef20625eebf9ee9f6e1 +File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 81b91551fa0282e21fa9b52ae70c8681 File: /usr/share/man/man9/hostmot2.9.xz 100644 root:root d4a99f7e9fbf5d0510c3b817a2c6756b -File: /usr/share/man/man9/hypot.9.xz 100644 root:root e2635f726c9c266a6ee5204da2f6eedb -File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 57c46a6b8789c35aafdcc0823e321a86 -File: /usr/share/man/man9/integ.9.xz 100644 root:root 348d10c10046bff9f23919bb20fef3a6 -File: /usr/share/man/man9/invert.9.xz 100644 root:root 6ebfd74980209349e08f374501ce44c8 -File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root ebb022b7bce6c44fa2c474f28bacd858 +File: /usr/share/man/man9/hypot.9.xz 100644 root:root b0b16f34fd4582395866b09540873b96 +File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 5b34019c2a39776db4a7d158d55b5ab0 +File: /usr/share/man/man9/integ.9.xz 100644 root:root a8a69eb7838c3cff06be23796e8d6992 +File: /usr/share/man/man9/invert.9.xz 100644 root:root 16d86593019ab6136c4f097461070f2b +File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root 7821fd4645f335df779dc7c173dd1fa5 File: /usr/share/man/man9/kins.9.xz 100644 root:root 7ef613a8265b032556c4e99f80eeee38 -File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 2ab47d0cdab04d9fd44ab34d8af5b5f4 -File: /usr/share/man/man9/latencybins.9.xz 100644 root:root d994313100e23b9aa1ded1cfa2f5af3a +File: /usr/share/man/man9/knob2float.9.xz 100644 root:root d74d3ee3fe90895b539dff3b5c0100ce +File: /usr/share/man/man9/latencybins.9.xz 100644 root:root e41d2d8619d4982589df484fd2263332 File: /usr/share/man/man9/lcd.9.xz 100644 root:root 620cc2889dca47fa4e7586ff480ba974 -File: /usr/share/man/man9/limit1.9.xz 100644 root:root cb3f3b9c1a13f094a219dcb5309b586a -File: /usr/share/man/man9/limit2.9.xz 100644 root:root fd5bab33bc25381fb6dd13d5095526d2 -File: /usr/share/man/man9/limit3.9.xz 100644 root:root 7efcac9bcfc28795c2cae27ba5ed7822 -File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root aa689ae6be89d2e25db0a2574e76a6d6 -File: /usr/share/man/man9/lincurve.9.xz 100644 root:root fe16695a4f1a276c2fe32603c100d184 +File: /usr/share/man/man9/limit1.9.xz 100644 root:root 1be1654ee0d8a223662605a188dee83d +File: /usr/share/man/man9/limit2.9.xz 100644 root:root 23256ced990b03d80db9def17fbaa271 +File: /usr/share/man/man9/limit3.9.xz 100644 root:root 7dfcc9a2ffeb8ddb54553eda6c17d49e +File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root 832cb75d8a40493aab5bb91f55a27800 +File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 7439c983d99adb89f78c402fc8e6812c File: /usr/share/man/man9/lineardeltakins.9.xz 100644 root:root ce6ac2a9983a327635ddcd90d0e26def -File: /usr/share/man/man9/logic.9.xz 100644 root:root 9ebee8975f0348d18ce3a7c70fcc8d5c -File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 7cf6e200f73511a00c4ce57325a8a21c -File: /usr/share/man/man9/lut5.9.xz 100644 root:root 9d9a929f86f75a7bbcd065a0ca7a0e46 -File: /usr/share/man/man9/maj3.9.xz 100644 root:root 4b885880baa9ee862960e5ea61b2be4c -File: /usr/share/man/man9/match8.9.xz 100644 root:root 92ea0cafff6d57d199ee591b2aa441f5 +File: /usr/share/man/man9/logic.9.xz 100644 root:root 4bb0535dce96b13372c884449b441246 +File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 3b0576befdcaa517781c88bfd37487d7 +File: /usr/share/man/man9/lut5.9.xz 100644 root:root 70184da3afdba325887c37007baf035c +File: /usr/share/man/man9/maj3.9.xz 100644 root:root 961e92a3f37ab4128b192497a4bf590e +File: /usr/share/man/man9/match8.9.xz 100644 root:root ffaa88afe122bebf64dc3fc020c0629f File: /usr/share/man/man9/matrix_kb.9.xz 100644 root:root 339c35c251b89cbdb7a0e83bce7035d9 -File: /usr/share/man/man9/max31855.9.xz 100644 root:root 58ca8d92151b6a66db0ac7de0fd7aa39 +File: /usr/share/man/man9/max31855.9.xz 100644 root:root 3c3223613c15f112d663c5817cb4f9ed File: /usr/share/man/man9/maxkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root bbca61cb5b5bda49aafd2948437a95f9 -File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root c8a1d7f79a385aa4dc2d9e9bf6ed4af2 -File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 81c849aec2190f20ee53bbac2211222a -File: /usr/share/man/man9/message.9.xz 100644 root:root bf8c384320152451f0bf78c35778fd99 -File: /usr/share/man/man9/millturn.9.xz 100644 root:root 67896c5cd2ffb09c5e9006461e00c436 -File: /usr/share/man/man9/minmax.9.xz 100644 root:root 91e3f07f39f5c342260ad0785b6b71a1 +File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root 8b5092d5eb41dc50239acd13312920d4 +File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root 385d2ed54349baa1d11f2627033ea559 +File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 34bdb15bb3e67bcb42092fabb0e8fb5d +File: /usr/share/man/man9/message.9.xz 100644 root:root ab221e006c57d2e8d2892be3f39948ec +File: /usr/share/man/man9/millturn.9.xz 100644 root:root e0c561a4780169f637bc13e64e74f079 +File: /usr/share/man/man9/minmax.9.xz 100644 root:root 4537af96ef5f00281049b079c79b6054 File: /usr/share/man/man9/motion.9.xz 100644 root:root 764260411c102c5aae03e9a6e6c224cf -File: /usr/share/man/man9/moveoff.9.xz 100644 root:root 3f49d73a8bfe967d73a7147de0b16a8d -File: /usr/share/man/man9/mult2.9.xz 100644 root:root a6d2ba789f2e9173276a2bc206b59553 -File: /usr/share/man/man9/multiclick.9.xz 100644 root:root eeadb3192d1b378c5eb93dea73876281 -File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 08e38e7c330b3b0bd5c7b42424a5734f -File: /usr/share/man/man9/mux16.9.xz 100644 root:root 59eeda95a63bfe43280d1b256fa9a585 -File: /usr/share/man/man9/mux2.9.xz 100644 root:root 6b7cd13b9b2912060826a8fba6569fe6 -File: /usr/share/man/man9/mux4.9.xz 100644 root:root 5a8a9ea4182e24708a304206c12a35e0 -File: /usr/share/man/man9/mux8.9.xz 100644 root:root ce980f37c85f955ee14128a742cd3647 +File: /usr/share/man/man9/moveoff.9.xz 100644 root:root 80fba500676ad2563db0dc1717e7eb5b +File: /usr/share/man/man9/mult2.9.xz 100644 root:root feb892bc9d12b66248150f00a23f9f2f +File: /usr/share/man/man9/multiclick.9.xz 100644 root:root 6b76c52b099ada1f3ec368da765608ff +File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 24af32dc886f4d68938adc20944e0d33 +File: /usr/share/man/man9/mux16.9.xz 100644 root:root 219235c018fd984d19044943e05c870f +File: /usr/share/man/man9/mux2.9.xz 100644 root:root 5f8c65ce98166d9bcba3d62049e99a79 +File: /usr/share/man/man9/mux4.9.xz 100644 root:root cbe3b9f3eec25dd74450003742940ce4 +File: /usr/share/man/man9/mux8.9.xz 100644 root:root d73911d54cd17d1904a392f2d47d2199 File: /usr/share/man/man9/mux_generic.9.xz 100644 root:root 81ed0423e2b5c893c152d9ed4491b0f5 -File: /usr/share/man/man9/near.9.xz 100644 root:root a7a983415f19616ca77d6e78b063ec93 -File: /usr/share/man/man9/not.9.xz 100644 root:root 20b658db51d992aaa5f25ee247ca4649 -File: /usr/share/man/man9/offset.9.xz 100644 root:root 3f6bec9029f0c2f5ea54767c85d517aa -File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 72ec5be8abc021afbc9fbddb200c0df4 -File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 0c713c79232e675c3ac689365db8e605 +File: /usr/share/man/man9/near.9.xz 100644 root:root df50db2aadfeb54643b0c1c121b42dba +File: /usr/share/man/man9/not.9.xz 100644 root:root 46a0c05710f7fd3dee9a5c6bfed078a9 +File: /usr/share/man/man9/offset.9.xz 100644 root:root 963ea25fc97fbb1a04d8faa020fcf6b7 +File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 8862b699d491f41990e14fb5a501c6f7 +File: /usr/share/man/man9/oneshot.9.xz 100644 root:root d07c30577bc276140402589e1d15c4f7 File: /usr/share/man/man9/opto_ac5.9.xz 100644 root:root ed6aa04a42b4697aea2bc5fc7de8500a -File: /usr/share/man/man9/or2.9.xz 100644 root:root 23b7816dfd9f636c038f4393753df395 -File: /usr/share/man/man9/orient.9.xz 100644 root:root b247eab30ea8aeccc499fd8cd0295658 +File: /usr/share/man/man9/or2.9.xz 100644 root:root 248833d1c32ad6ad0d00311af7bf3751 +File: /usr/share/man/man9/orient.9.xz 100644 root:root f11994c2bce31c8cbceb6af3e42f1805 File: /usr/share/man/man9/pentakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 File: /usr/share/man/man9/pid.9.xz 100644 root:root 9106a5d37a8880989de46921cdb78588 -File: /usr/share/man/man9/plasmac.9.xz 100644 root:root 5072c6d85c9f2dd7c3a5719998ea4293 +File: /usr/share/man/man9/plasmac.9.xz 100644 root:root 2ae94fc0a8a9fd67f961e8cde4dae50e File: /usr/share/man/man9/pumakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12645,52 +12644,52 @@ File: /usr/share/man/man9/rotatekins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 1395f074f46413a37e2764cb397e50ce +File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 7c1e146b3f3083264da30025c4257a2b File: /usr/share/man/man9/sampler.9.xz 100644 root:root 713192b4e67ac75366e7848681137025 -File: /usr/share/man/man9/scale.9.xz 100644 root:root f3438a0dbe68cce69dba93ab52f50453 -File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 4c489b8a7a7e2647a674103a59938962 +File: /usr/share/man/man9/scale.9.xz 100644 root:root ae29f8a6542369e5620d4b177f1a11a4 +File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 562e60dc2d359a0cb7e777f48eb3ec98 File: /usr/share/man/man9/scarakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/select8.9.xz 100644 root:root c4e78d3537131fbbb101a6d27593a528 -File: /usr/share/man/man9/serport.9.xz 100644 root:root 29ce16beeb7493fd9259b358a4306fd2 +File: /usr/share/man/man9/select8.9.xz 100644 root:root 5fdd0cd14242eae5027a983759ca1fbc +File: /usr/share/man/man9/serport.9.xz 100644 root:root adb2ab6502ebe01370bf925e5df6cb30 File: /usr/share/man/man9/setsserial.9.xz 100644 root:root a0c4c6061b229bf1b0bd7b45aa0a6d1b File: /usr/share/man/man9/siggen.9.xz 100644 root:root bb8a58ed0261c53246a616a6e5859857 -File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 6a9f7eda99a1b983eb4ff81ece044d5a +File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root e1a5eba58758e6f2939b5523535e2c99 File: /usr/share/man/man9/sim_encoder.9.xz 100644 root:root 1061200399dc5f45100c0b9ac0b34ddc -File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 28210df3dfa5eb451dd7d66708072b3e -File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root 0a991582fc962b05b22a141dc5058c38 -File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 5b89eb8b65fc6d010e81aeef48614c8d -File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 3d57367807d9ffc681fc1abd4766e22e -File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 2c87822ff6976e8c2b3efc6b63eebda5 -File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root ef3c78595a455337dc32d7968f13dceb -File: /usr/share/man/man9/spindle.9.xz 100644 root:root c7a6208d1409624ef8b8f55b9d3efe11 -File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 97d9b9daa4395ff8dd6aecd52f6b2273 +File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root d3f2b81a86fcf06241ed3d1f1bc0765c +File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root 9daeca00d349d495b8e497761cb856a4 +File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 98458d7afe5fa362642a6a3bb520a646 +File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 0050560e70ac3df6267f752603063132 +File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 9c6af88a75dfc1664d96051d44ac07f0 +File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 8ce341026e17b56686cd2136bdc67ba3 +File: /usr/share/man/man9/spindle.9.xz 100644 root:root 50131ab374d9f107f2ea76ae1d168f21 +File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 542b027cfb7d1327b27a57817f984fcc File: /usr/share/man/man9/sserial.9.xz 100644 root:root cda27ad79b3b748fe69d3aa6133dbdf9 File: /usr/share/man/man9/stepgen.9.xz 100644 root:root 1151c7075a51ad05e9e82ff643cce6a9 -File: /usr/share/man/man9/steptest.9.xz 100644 root:root 521a623cb8f78f4a420255da9628ad8b +File: /usr/share/man/man9/steptest.9.xz 100644 root:root 93dab06bc03d4fff4bf426720bdba3fb File: /usr/share/man/man9/streamer.9.xz 100644 root:root 49ec8c08805e0a7e32ba8ab4ab834b61 -File: /usr/share/man/man9/sum2.9.xz 100644 root:root 0368c2724ed4569eb8c2ccdd6f4dd433 +File: /usr/share/man/man9/sum2.9.xz 100644 root:root 2dbd50d277368157fdbf4a4c66622fae File: /usr/share/man/man9/supply.9.xz 100644 root:root 760e3e6615392513db8cc348d9c1147b -File: /usr/share/man/man9/thc.9.xz 100644 root:root ed45d04195761ad958001f0c00050a90 -File: /usr/share/man/man9/thcud.9.xz 100644 root:root 6948b68b7f671445a765b645725e34b1 +File: /usr/share/man/man9/thc.9.xz 100644 root:root 0dc72a1fc09a9bbbd21363317c856d66 +File: /usr/share/man/man9/thcud.9.xz 100644 root:root 89650ec6cfdbd14963a4371ca40abaf9 File: /usr/share/man/man9/threads.9.xz 100644 root:root 0a89f5af89b5cdf6d132fcfb19ba8726 -File: /usr/share/man/man9/threadtest.9.xz 100644 root:root b2e1ba467a852aff5b7fa3762de619d0 -File: /usr/share/man/man9/time.9.xz 100644 root:root 56fd887f640ce30c23c33d177e10f68f -File: /usr/share/man/man9/timedelay.9.xz 100644 root:root a8c6426a4f9db6bcba4338b8478cdc09 -File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 27cbad223cad30d9da67758261da8e0b -File: /usr/share/man/man9/tof.9.xz 100644 root:root 3b922e40d0185494aed61660aac8f855 -File: /usr/share/man/man9/toggle.9.xz 100644 root:root 51b9710cc23c46285ba5d11d30b53460 -File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 534bba0e2d47a990bdcd41f87a1ef37b -File: /usr/share/man/man9/ton.9.xz 100644 root:root eac66db39bdc17c352ae1291732ff7af -File: /usr/share/man/man9/tp.9.xz 100644 root:root 4a693bbcae5b4fa32e8bea60a0e8d58a -File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root ddea8aa84757f87bd22a6e5d7ec41974 +File: /usr/share/man/man9/threadtest.9.xz 100644 root:root eb973ee7b35f41d486b58b6cd8f4e954 +File: /usr/share/man/man9/time.9.xz 100644 root:root cddbc0b8150b7afa5873950f229eac57 +File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 2f23e7398e622f65b26ff66263d2b7fa +File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 6ab65018e22db36be91948abc879794f +File: /usr/share/man/man9/tof.9.xz 100644 root:root 6d5c0b96c338f1728e0a8f1810a424bb +File: /usr/share/man/man9/toggle.9.xz 100644 root:root 1b6b8c36243ccfb88fddaae17b35f940 +File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 6d9bb3bf21d7baea361dee30de2d621d +File: /usr/share/man/man9/ton.9.xz 100644 root:root 40daca02cccec8a53a4fb045984abc9b +File: /usr/share/man/man9/tp.9.xz 100644 root:root cfc0d5547b62aee16049316776e460c6 +File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 5a56fdb52cc012a1413fe27d4e47c8ed File: /usr/share/man/man9/tripodkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root cb0cf1663c05d2408992477399785906 -File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root f96d7c5bfb6e50493924f99d426a0c89 +File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 152862bf64fd2813e91000899bb8a857 +File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root d7c987af0c01b67703284c98cc41c58f File: /usr/share/man/man9/trivkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/updown.9.xz 100644 root:root 1df0809d58196bcd74287488f0ca81e9 -File: /usr/share/man/man9/userkins.9.xz 100644 root:root 71edd35433c1298eb70008bbefa6403c +File: /usr/share/man/man9/updown.9.xz 100644 root:root 7f4d54909d20df1662dbbda140de724f +File: /usr/share/man/man9/userkins.9.xz 100644 root:root 639f3186732da56649d479ba2ef7883b File: /usr/share/man/man9/watchdog.9.xz 100644 root:root 3ccf8bb1e89f95bd9212dab04d95b193 -File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 5b2da57828a8bb828fdf7e86ee272ed8 +File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 0c5d38477b6695d3ddbc6398728a0756 File: /usr/share/man/man9/weighted_sum.9.xz 100644 root:root eb6db3b792484b220170ad1fd6fce770 -File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root de43ff2329207340c1da9259dc8af279 -File: /usr/share/man/man9/xor2.9.xz 100644 root:root 33f51b01b9a74f1747da58f53c548cac -File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root b00bb58ace5831623f07e10493974d11 +File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 0aab5efc1b7cdbbf41150303f05996cc +File: /usr/share/man/man9/xor2.9.xz 100644 root:root 6d9e2e224b0d14fad09068b142bc30af +File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root 4ac2b6bf74efa52e15f565587cf782e1 File: /usr/share/qtvcp 40755 root:root @@ -13648,2 +13647,2 @@ File: /usr/share/qtvcp/widgets_ui/virtual_keyboard.ui 100644 root:root e757c13d9a96b2fb641409c70442ded6 -RPMIdentity: 10b208be4ec3ff042dd10db1638aeaa27a711f96a6790a8239a660bb982a016e67fc412c9d58e977235c7578c4c75398fcac9551b0b067a54a4f100f10abd25e +RPMIdentity: d4d88d8314b2de1c5cb3f387cf2b10b3e293b11826139f763f00ba7a13c5e9b500454e6324ec78eb61befe4fbc8fd13b0b41b805075a79c2b0db5352de1acf99 --- linuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm.repo 2024-05-13 20:46:31.000000000 +0000 +++ linuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm.hasher 2024-07-13 09:07:56.203852742 +0000 @@ -2826,3 +2826,3 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root aa0d0dda878c983ea545babf92afeaa5 +File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 28288c4ece3214e2b8ce0971d98108d3 File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.comp 100644 root:root 36db960cdfb47870d04dc0825e67fbe5 @@ -2837,3 +2837,3 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root b537df8ad29748e51b06524378e51ec4 +File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 8827c5edf542ede01c35535030af36eb File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.comp 100644 root:root 59df738983b6701d52519fdd79609b2f @@ -2884,127 +2884,127 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs.c 100644 root:root 27210fb09fc16a08a46687ceb64aee6f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs_s32.c 100644 root:root 7ae560fbe0c36d12089b092013e46c23 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/and2.c 100644 root:root 1709121b98b9da0339168b5fad60b4f9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/anglejog.c 100644 root:root 08136d3dcd9688a421cd686923656616 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/axistest.c 100644 root:root 60f0d8b9ea9b50206608e33b28f717ab -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bin2gray.c 100644 root:root 0f45c80006731dee15cf20b8ca7a1d70 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/biquad.c 100644 root:root 4e901f39d58ea442bc12a9b6d9b9c22e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitslice.c 100644 root:root fd5a211a83705310694c2e66572249b5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitwise.c 100644 root:root cb40b2d9be4035a0bcca0ba0f3e28988 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bldc.c 100644 root:root 75d8bc159d0f835b18fd6fd2d1825426 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/blend.c 100644 root:root 6b26ed817a0f6ddc2dac657d4e3c4b31 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/carousel.c 100644 root:root 4ec8485a452cabf94c2b4d2b6d4a5403 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/charge_pump.c 100644 root:root 8264d632865d22d05bc76607d0e4b9bb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke2.c 100644 root:root 17d0dc1b61f23dc5d73e8350d8aa00ba -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke3.c 100644 root:root 5617f4ee4136f513a290b7b2128189b9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarkeinv.c 100644 root:root e3dcf1e83b9415fec145033e4a76a27d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/comp.c 100644 root:root 1c0848a5d96ad9155c29a2b8e40b6bd4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/constant.c 100644 root:root 0c2a994dff45b969b76777fab51227b8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_float.c 100644 root:root eb7bc070e7cedeeb4d416b80208457de -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_s32.c 100644 root:root 908ebc08d6fedcf07eb30c26d7eb8f56 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_u32.c 100644 root:root 074e76a241f851a2c3bbfecc544e34b7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_s32.c 100644 root:root 56a19d56799bfe01d980bd05a4ba7bf5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_u32.c 100644 root:root 425299de62869ddb2e3b4f8f71b6876c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_bit.c 100644 root:root b22e24ca083b46c19de5b9add7e33699 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_float.c 100644 root:root 412e3f4bd1bb5d4b82c18a8cd3f02b92 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_u32.c 100644 root:root 56b0015f00ebd12e1730979e52130df4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_bit.c 100644 root:root f81309e40803f5c790bf28d1b532d9d0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_float.c 100644 root:root 71406c2c140ca52cd8343640f2227298 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_s32.c 100644 root:root e84b726c1b35363b11d72b9308d57af6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/corexy_by_hal.c 100644 root:root d303169f078cc6b04050d6f92cace960 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/dbounce.c 100644 root:root b4d0db0b65399b71d772ead9b3f5426f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ddt.c 100644 root:root c8d1278753b20bc15e9211209fa8d9c1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/deadzone.c 100644 root:root bc9cd37c30c14649215d404202cd3191 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/demux.c 100644 root:root f4c83b84a4e72646f4ac619b5c43d027 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/differential.c 100644 root:root 4d9ed61e6c41507d63864e02cbbfff41 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/div2.c 100644 root:root 47553bb506b17e619ab9dd17620b60d2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/edge.c 100644 root:root fe07f63bb730819e584dd224ad83a913 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/eoffset_per_angle.c 100644 root:root 4dedc5bc4df96c2bd3be0e8e42946e8d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/estop_latch.c 100644 root:root 3949e78df91dcc9d2ff5f54a376999d8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/feedcomp.c 100644 root:root 05998585aeda0bf221ecea9693b3ae6c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/filter_kalman.c 100644 root:root 090178b93f8037476a0f74a7f011ff91 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/flipflop.c 100644 root:root 6f256967c05828da4a3535d982413230 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gantry.c 100644 root:root b923a05942bd7598420fc34378a56a4d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gearchange.c 100644 root:root 3afaa87992ff3c75dbd71b3134b10eb9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gray2bin.c 100644 root:root e7976e6102d30c18971e111d2338eb95 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/histobins.c 100644 root:root 344de5ba8eae4451a8eb5972468fe309 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/homecomp.c 100644 root:root daf81955ccf72687753b23a72011d77c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/hypot.c 100644 root:root ca9fc308e22ada7c970fc7d16e3ab380 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ilowpass.c 100644 root:root 343c501d5160cbb6c5fe07ad830603e9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/integ.c 100644 root:root 6807d4dcb293b29eab4119126d19d901 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/invert.c 100644 root:root 8fe1cdff3e1ea28e7c2b2f5a91cc4073 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/joyhandle.c 100644 root:root 80e442d4603791b9667a0235b81b21fb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/knob2float.c 100644 root:root 6007a9424f38c9922c1dba7f35750084 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/latencybins.c 100644 root:root 4b1f28af48b5237b5fff935f1634106a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit1.c 100644 root:root cc5a29746fc4a3ee3b1d753bbfe654c4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit2.c 100644 root:root 0b0c55a5911bd13cde76e4dc0e047fbd -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit3.c 100644 root:root e87f01abf17d2817052a846a53f437eb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit_axis.c 100644 root:root 2e6646da5633990bdcf14d683ee62dfb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lincurve.c 100644 root:root a0f98a6dfdab66dd65c096c190e04d38 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/logic.c 100644 root:root 5246016b259803699fb7dc83a8ff0db3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lowpass.c 100644 root:root 68bbb4c4583cfd98cfa6f70683b81ee5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lut5.c 100644 root:root 187994bfe359126876495743129d787c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/maj3.c 100644 root:root 601215b632e2ac11c2e63446cf8663da -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/match8.c 100644 root:root 1b486588e62c13be8766884bc7c17e21 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/max31855.c 100644 root:root 324a5a257de8743ef8582d472ad7b008 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 72963b339b42007de7e03bd0eb1567c8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/message.c 100644 root:root 06c1750453ad4ad591cf87b39b8f727c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/millturn.c 100644 root:root 513171319fe777a0bf6b5d04fadd536d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/minmax.c 100644 root:root aae5177e857d89d237eb63df2b2bca04 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/moveoff.c 100644 root:root 65a084cf9a30bda5a4be699de03204c4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mult2.c 100644 root:root fdc8ac15ba0c62d5ca1f892a2114fda5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiclick.c 100644 root:root b86848a4d48ba8734c2c9699ae89b49a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiswitch.c 100644 root:root 0e06d504ccdbc037cb991dc80dce6702 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux16.c 100644 root:root 284515c1e01376f167625e61c306aae6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux2.c 100644 root:root 7d143f54984eedbf0cecaa962cce3e29 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux4.c 100644 root:root d95bd2c8158841bd61e3c9940ae3a58f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux8.c 100644 root:root 27ae53b0eac6eaec443a5c5c07b0e85c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/near.c 100644 root:root 59ad43610f7f6ea6f57e39f7539d1ce1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/not.c 100644 root:root 25b5d14c0328ddb6efed4511fc63b4cd -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/offset.c 100644 root:root 7d66d8adbda82a6737b67a8fa3162c52 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ohmic.c 100644 root:root 5731f84952152e1091399b266656e152 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/oneshot.c 100644 root:root 7e4c4a4834339921c0d825f13342f068 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/or2.c 100644 root:root 55784fba502a9fc046b5b456b3fb5197 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/orient.c 100644 root:root 1e4e4c6bef9f052233dbb8fe39c26e3f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/plasmac.c 100644 root:root d4445a5076fe5a758cb03bb95edac74a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sample_hold.c 100644 root:root d2562cb1af3bc28bda6ff7f58dc7fd06 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scale.c 100644 root:root ede1c38d74b06e2d5262ad40712a732d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 99c4532e88756376d12b6eaa79f0282d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/select8.c 100644 root:root 096bdbaa59b44864b0fa0ea0d1345cdb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_axis_hardware.c 100644 root:root 999f2267de670a5e31e85888f4429477 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_home_switch.c 100644 root:root 60e2e7a44ac2d0d072993cdec051c536 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 3f306d0878fa8367802647e52b1b5d45 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_parport.c 100644 root:root 55c1e60e9d416bf9968d69e606442205 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_spindle.c 100644 root:root 86b6dcabdc8763ce98a1dc7706a0c924 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/simple_tp.c 100644 root:root ed2b888bbaa9adb6bc23df59edb42e80 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sphereprobe.c 100644 root:root a0ca8380a497fc5e0791cf6466e967d7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle.c 100644 root:root b2d76c614e30626ea37145c50060720e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle_monitor.c 100644 root:root b43ca03f7602d010ae2329a94e8995a4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/steptest.c 100644 root:root ed1452042e03d19a3953256b1b57f432 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sum2.c 100644 root:root 49ead5d237eafba07ecb0767c06ef7f6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thc.c 100644 root:root 3f5582f2e5df7f29241725d1d7a0b054 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thcud.c 100644 root:root 1aec647cfa244300007556b4ea3817d0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/threadtest.c 100644 root:root 5dbb2ed8acb64b5b4fdc39c9f88ae227 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/time.c 100644 root:root ae0c74bf754668271c96cb085dce54d9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelay.c 100644 root:root 63c5d5544acf007e5dfa522cca1e971d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelta.c 100644 root:root 01fd88c20a1b731499ce724a2b2e29fb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tof.c 100644 root:root c113de7a88461648a716fd7578e1bcbc -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle.c 100644 root:root f247901a91a3163d3fca87d66f7ed66b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle2nist.c 100644 root:root 80b9ab67dca551fbce42429d275a845b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ton.c 100644 root:root 698fd997ca5fbcea3aaf09300d83ce4b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tp.c 100644 root:root f31e0ece611d4fea87e84fbeb05acfef -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_bit.c 100644 root:root 8322b5ad796d2bc55eb0a6d18fff648e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_float.c 100644 root:root a9da332010a4f7590a4770c61f5657c0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/updown.c 100644 root:root 4a5e11e464967db1c9485e9e33484c55 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/userkins.c 100644 root:root 3bc65d526f2aac360b91489f92987fb3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/wcomp.c 100644 root:root 5908abf29e34740b3db8ee161866bdf1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xhc_hb04_util.c 100644 root:root 55d74ad504d2f39bc24e70c05c227074 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xor2.c 100644 root:root 203ffa4afbfb9991587f4f23a0762d0e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 5d36af4099dea3a90094a589f0bc7628 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs.c 100644 root:root 06f5d61eb50cf9040b659d5018d29ac4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs_s32.c 100644 root:root 94096e97e43ad76134bafa4681db996e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/and2.c 100644 root:root afc6447d0ca9bd4821dced987ac174ad +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/anglejog.c 100644 root:root 1187d11102a16437d1f7e65c4ccb0ba7 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/axistest.c 100644 root:root 1c0eba362abe3c0b493281195e6c00f9 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bin2gray.c 100644 root:root 458e4e8f30579bb02745174872e1933f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/biquad.c 100644 root:root 0a545f96bdce42fa485739a4f8465615 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitslice.c 100644 root:root bba29ae258a005b16e1ef6613cb2a9d4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitwise.c 100644 root:root 683a983b24ccf8399613447c43708eb5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bldc.c 100644 root:root 1f5fb827497f15ea0966c0ac9ed6a786 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/blend.c 100644 root:root 3011bbdde1034f139d9d114c06f1618e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/carousel.c 100644 root:root 6b9e858e4de0f2e778ba8082d993034a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/charge_pump.c 100644 root:root d2b760ea4df9b65073b8932fdfbf2bdb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke2.c 100644 root:root 4102272cf5e8abd9adb3d962ef5c6b24 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke3.c 100644 root:root 38fc237183ce6ff99322f014ca95919b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarkeinv.c 100644 root:root 8c2ba5d58d7aadddd58dd35104027809 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/comp.c 100644 root:root 6d4114d479a402a26f9f946e0e9d7677 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/constant.c 100644 root:root a619b311cb8b9ca75cf25e089bd83b7b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_float.c 100644 root:root 64d24208f089f2e5853b7594b0880bb3 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_s32.c 100644 root:root 705e9cb24485a9914c81d188ae236e3a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_u32.c 100644 root:root 8c7ed21351210dd5818cdb20a8006ec4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_s32.c 100644 root:root 023314d0f0cbd18506b1d2bf8f69f3aa +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_u32.c 100644 root:root 76e8532ea80ca84a88a957e4e4971988 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_bit.c 100644 root:root 646d43e47a6fd82fcd530450de4e4446 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_float.c 100644 root:root e2d20f5f23ce54dfc5289f309e74c08e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_u32.c 100644 root:root c89a4bdf99d9b5e3c981060d4a89ce5b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_bit.c 100644 root:root 7b363d4ef5a737159f0f9995e8006ab5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_float.c 100644 root:root 684a2c4b882d83d4fa8655fcf7dab874 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_s32.c 100644 root:root 27bffff4e36f7b71ecdda42476fe9279 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/corexy_by_hal.c 100644 root:root 22446bea9efdd15e37f575b3c77a34b5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/dbounce.c 100644 root:root 8489ed3d3e6b4ec08facecda8e0010ab +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ddt.c 100644 root:root 4e8fbe833e428f8f1e851896ea8b1275 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/deadzone.c 100644 root:root 3d455c19cf19994c713886e526219886 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/demux.c 100644 root:root a9d1acaf292785a926181d9e90194c96 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/differential.c 100644 root:root 4bb6870023f386e9e06f27e783c72693 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/div2.c 100644 root:root c58709af8f713fbd534179a7fb664f03 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/edge.c 100644 root:root c510103b84eebe9ddf55abb6ed8a4d75 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/eoffset_per_angle.c 100644 root:root ae6044f165f88b59d62283a1bcfdc090 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/estop_latch.c 100644 root:root 0461806f676f494f3fc8961081b2bf32 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/feedcomp.c 100644 root:root 835eaf212b56655f6dd41ca159ae253c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/filter_kalman.c 100644 root:root 66b1b539df3169eacf58f7a67bad5c7b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/flipflop.c 100644 root:root 00cd9614991dc84a95196a2da583038c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gantry.c 100644 root:root 3d347a46754bd9e9a3eef617a0a94acb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gearchange.c 100644 root:root ec930599879c90522c11d26ce092e056 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gray2bin.c 100644 root:root 6458001a2400e45541482ea83861293d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/histobins.c 100644 root:root c1fcc451599dffe78b1b4cc4b5b25cbc +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/homecomp.c 100644 root:root 76ec513a2bd178376820e58018d09d62 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/hypot.c 100644 root:root de23faf09e05a056f52573aee45e357a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ilowpass.c 100644 root:root 22a47f6076d6e8f35c8225f8baf1d80c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/integ.c 100644 root:root 8a10a01a322a45331eaf91f55098d991 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/invert.c 100644 root:root 8966ea71a96beac256bb1133e1289ac7 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/joyhandle.c 100644 root:root ca89982e8f97e7b8db8a9708be76c118 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/knob2float.c 100644 root:root e9ab1ab12ebaa9c9a9f34be6e62c82c3 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/latencybins.c 100644 root:root 0c93c15acf4ac319872538a59bea7a02 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit1.c 100644 root:root 420ce4f13e02de31e804385cf9c0f8aa +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit2.c 100644 root:root 04f889aba42e01fa105bf4bf342bd850 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit3.c 100644 root:root f095e50c8032e4630b72f71b9f909c42 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit_axis.c 100644 root:root a8c61f3be59b4e3892b526db28f78b70 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lincurve.c 100644 root:root 798a35972807781adba410bf535c3866 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/logic.c 100644 root:root 256a0df36298c491ddb471372ef52f96 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lowpass.c 100644 root:root 7670d2393a47f0b24e36978ea40e0f60 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lut5.c 100644 root:root db8b8cebb27a60bbcf9a6186460f5aba +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/maj3.c 100644 root:root 4b6b72c315aa775725dc37da5a437ee5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/match8.c 100644 root:root 07c7483c17d2f81350a08157d16efa44 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/max31855.c 100644 root:root 52274cccfe6e402e526d1d9bd3334e7b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 5066c8d1f14bd5b9fc2d8834befacee3 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/message.c 100644 root:root 772530a64bf1d4e198f23a34bb83bd27 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/millturn.c 100644 root:root 8b774f4b46e419856ff30b7984d33f7b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/minmax.c 100644 root:root 3b3a993c1006c8fc1ff96c835d29700c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/moveoff.c 100644 root:root 46a90104ef3e7485a3ab38a4e84e0a22 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mult2.c 100644 root:root 3c6a9486dd6fe325e78633d7f90fc975 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiclick.c 100644 root:root 02e1c3a0bef60eeeb253b3edb41a6fa5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiswitch.c 100644 root:root 51d53093346c3e31986f6083e3f2a183 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux16.c 100644 root:root 0857a4dab7ec56edad23004ef3787959 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux2.c 100644 root:root b0ecda0620f381332daa82bff316fde4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux4.c 100644 root:root af0f2a138fcd1213dcb52ecd93cdeee8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux8.c 100644 root:root 5907bd0fc5b7d1693358923af4b74fc8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/near.c 100644 root:root 81c2229fa179399da3310f5a99e254ca +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/not.c 100644 root:root 4d85182eb26e4e6a98aedbe9cd08276d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/offset.c 100644 root:root 791927046c69d6c5a80617c3f7111e55 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ohmic.c 100644 root:root 61b8b09f748445eb4c17e786b5d6bdbd +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/oneshot.c 100644 root:root 7f1cee4b7dd16109dbe0cfb9507f4f31 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/or2.c 100644 root:root 9529a739b065eb8010e9804f2d5bfba4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/orient.c 100644 root:root e7ab8333c611bf5f3dd1bf4db1d12cfa +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/plasmac.c 100644 root:root 03bd9b1b6cd52a2c9d9bfa391dc89478 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sample_hold.c 100644 root:root a401b1718b0a6e10aaf4661ae215c44e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scale.c 100644 root:root 32031d0af66e1a2998c65e2e20c36304 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scaled_s32_sums.c 100644 root:root e774a9a0d9ce2a4721f99c822f0e9420 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/select8.c 100644 root:root 67cda859f00f2aff3737f3dee15fe138 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_axis_hardware.c 100644 root:root abd60296c5a2ef2e7510c5239eeac6ff +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_home_switch.c 100644 root:root 2597fa1303b36851b4c1a341ab8f81e3 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_matrix_kb.c 100644 root:root c1d7417bbc5b0c139fef4903dfb24ca4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_parport.c 100644 root:root 5e53aed70fb98708d2d45db719c79c1c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_spindle.c 100644 root:root 70c2c427c88b4aa48ddf692fca456924 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/simple_tp.c 100644 root:root 41e3371bfdca27babeb580935ae8d258 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sphereprobe.c 100644 root:root 60b8e43dc2eae56e8690a03948377471 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle.c 100644 root:root cf118a32811b8920f9bc106d2ebff6c8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle_monitor.c 100644 root:root e685e397e39a789009bd9d36ff8a3906 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/steptest.c 100644 root:root 286b5e25780a90c78eda184a7bdea124 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sum2.c 100644 root:root 02dc80d62c52cda070c07de7eeaff20b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thc.c 100644 root:root 7cacdd898440992171c262448a93476d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thcud.c 100644 root:root 82c1add5019e660aee9f911eb921164d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/threadtest.c 100644 root:root 9de96c65dae12fb9263e5d78c5863450 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/time.c 100644 root:root de2890e584839c7898496f8ab906e03e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelay.c 100644 root:root b2987874745b4f2a2ae19e71ffad181e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelta.c 100644 root:root 5b7e41abc7072fa2d4b1ec722cd8baf0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tof.c 100644 root:root cba8ae063ad408a347936cfb8e58313a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle.c 100644 root:root 717324720d87c73f63bfea83110a5a0a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle2nist.c 100644 root:root d0517a5de92ddb5447a3d78171e7d3a2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ton.c 100644 root:root 6cce60f78ac693827338b743da7e55bb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tp.c 100644 root:root b0b66c3ff391a98ebd8905bbbd74a358 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_bit.c 100644 root:root b8e62d572d8f2d3b6146017888c87950 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_float.c 100644 root:root ae71da49e974e187e4c90cc0971ed6df +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/updown.c 100644 root:root 0f3837b1a0bc0090957aeefa7e058d38 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/userkins.c 100644 root:root 78edcc580e045db0f24aa1d8f5be4eef +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/wcomp.c 100644 root:root 5aaa636eb670c5ed97f9955101b4279a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xhc_hb04_util.c 100644 root:root 5d52fb51ea2e13a24e2654459b52ec70 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xor2.c 100644 root:root 78720e7db8ed95414e4cdfd175690fc8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 5417270356cec119c3ac186b986caba6 File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 235138bbb3a18a7d7d447ff37bf40fce -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_uart.c 100644 root:root 5dba183b436692fc821949dda35d0d0c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/serport.c 100644 root:root 38bc0ee858b678e5cec512e0d45ee2fd +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_7i65.c 100644 root:root f2d93b7055badd7bd1cd0d30a9e35c2a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_uart.c 100644 root:root 6f4ee85a4a7e8815b356834efb1351f0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/serport.c 100644 root:root 9f94e39bccaa31034e842e7aaf380dbc File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps/thermistor.c 100644 root:root 3bc188c8cb875e0ca29b7a51cea8dd28 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps/thermistor.c 100644 root:root b30b7efff2aeaec93513aab4ff357c33 File: /usr/src/debug/linuxcnc-2.9.2/src/rtapi 40755 root:root @@ -3019,2 +3019,2 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/rtapi/uspace_rtapi_string.c 100644 root:root e93709d53c7b25f0358ac01589652a43 -RPMIdentity: 3071913b510474f654796b817da393baedb75bcefafeb5ae9601a022eb5c6651bed8c647367f9c0bd604ee70ea5bdb1cae836b5ce951c33fc6382b9619563187 +RPMIdentity: 5fa3f8bc32013c98454a88a36945eb83bae81202f22b5bfb3016e3e2bd4b64768c79031f8f70a79b288cf7e5b85b4c4e3c06a7f3daaa07ba0484f1bbfd626be4