<86>May 11 08:02:30 userdel[3392348]: delete user 'rooter' <86>May 11 08:02:30 userdel[3392348]: removed group 'rooter' owned by 'rooter' <86>May 11 08:02:30 userdel[3392348]: removed shadow group 'rooter' owned by 'rooter' <86>May 11 08:02:30 groupadd[3392412]: group added to /etc/group: name=rooter, GID=1220 <86>May 11 08:02:30 groupadd[3392412]: group added to /etc/gshadow: name=rooter <86>May 11 08:02:30 groupadd[3392412]: new group: name=rooter, GID=1220 <86>May 11 08:02:30 useradd[3392454]: new user: name=rooter, UID=1220, GID=1220, home=/root, shell=/bin/bash, from=none <86>May 11 08:02:30 userdel[3392493]: delete user 'builder' <86>May 11 08:02:30 userdel[3392493]: removed group 'builder' owned by 'builder' <86>May 11 08:02:30 userdel[3392493]: removed shadow group 'builder' owned by 'builder' <86>May 11 08:02:30 groupadd[3392524]: group added to /etc/group: name=builder, GID=1221 <86>May 11 08:02:30 groupadd[3392524]: group added to /etc/gshadow: name=builder <86>May 11 08:02:30 groupadd[3392524]: new group: name=builder, GID=1221 <86>May 11 08:02:30 useradd[3392561]: new user: name=builder, UID=1221, GID=1221, home=/usr/src, shell=/bin/bash, from=none <13>May 11 08:02:41 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432033 installed <13>May 11 08:02:41 rpmi: libgdbm-1.8.3-alt10 sisyphus+278100.1600.1.1 1626059138 installed <13>May 11 08:02:41 rpmi: libexpat-2.5.0-alt1 sisyphus+309227.100.1.1 1667075766 installed <13>May 11 08:02:41 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962878 installed <13>May 11 08:02:41 rpmi: libp11-kit-1:0.25.3-alt2 sisyphus+336533.100.1.1 1702645575 installed <13>May 11 08:02:41 rpmi: libtasn1-4.19.0-alt3 sisyphus+327816.100.1.1 1692802618 installed <13>May 11 08:02:41 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>May 11 08:02:41 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>May 11 08:02:41 rpmi: ca-certificates-2024.02.24-alt1 sisyphus+341362.100.1.1 1708791001 installed <13>May 11 08:02:41 rpmi: ca-trust-0.2.0-alt1 sisyphus+344843.100.1.1 1712743326 installed <13>May 11 08:02:41 rpmi: p11-kit-trust-1:0.25.3-alt2 sisyphus+336533.100.1.1 1702645575 installed <13>May 11 08:02:41 rpmi: libcrypto3-3.1.5-alt2 sisyphus+343320.140.3.1 1711982452 installed <13>May 11 08:02:41 rpmi: libssl3-3.1.5-alt2 sisyphus+343320.140.3.1 1711982452 installed <13>May 11 08:02:42 rpmi: python3-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>May 11 08:02:42 rpmi: python3-base-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>May 11 08:02:42 rpmi: python3-module-py3dephell-0.1.0-alt2 sisyphus+328191.600.5.1 1693609196 installed <13>May 11 08:02:42 rpmi: tests-for-installed-python3-pkgs-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>May 11 08:02:42 rpmi: rpm-build-python3-0.1.25-alt1 sisyphus+344685.100.1.1 1712595070 installed <13>May 11 08:02:42 rpmi: rpm-build-tcl-0.6.2-alt1 sisyphus+299320.100.1.1 1651401392 installed <13>May 11 08:02:49 rpmi: xorg-proto-devel-2024.1-alt1 sisyphus+343583.40.1.1 1711440649 installed <13>May 11 08:02:49 rpmi: libjpeg-2:3.0.2-alt2.1 sisyphus+340135.100.1.1 1707449053 installed <13>May 11 08:02:49 rpmi: libpng16-1.6.42-alt2 sisyphus+339555.100.1.1 1706781690 installed <13>May 11 08:02:49 rpmi: libwayland-client-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>May 11 08:02:49 rpmi: gobject-introspection-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>May 11 08:02:49 rpmi: libatk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>May 11 08:02:49 rpmi: libglvnd-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>May 11 08:02:49 rpmi: libboost_system1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:49 rpmi: xml-utils-1:2.12.6-alt1 sisyphus+347327.100.1.1 1714660890 installed <13>May 11 08:02:49 rpmi: liblcms2-2.16-alt1 sisyphus+335676.100.1.1 1701682605 installed <13>May 11 08:02:49 rpmi: gobject-introspection-x11-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>May 11 08:02:49 rpmi: perl-HTTP-Date-6.06-alt1 sisyphus+324527.100.1.1 1688834564 installed <13>May 11 08:02:49 rpmi: zlib-devel-1.3.1-alt1 sisyphus+342532.100.1.1 1710232285 installed <13>May 11 08:02:49 rpmi: libtcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>May 11 08:02:50 rpmi: tcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>May 11 08:02:50 rpmi: libquadmath0-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>May 11 08:02:50 rpmi: libkmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>May 11 08:02:50 rpmi: libwebp7-1.4.0-alt1 sisyphus+345159.200.1.1 1713168690 installed <13>May 11 08:02:50 rpmi: libICE-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>May 11 08:02:50 rpmi: libfribidi-1.0.14-alt1 sisyphus+345841.100.1.1 1714055921 installed <13>May 11 08:02:50 rpmi: libSM-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>May 11 08:02:50 rpmi: rpm-build-gir-0.7.3-alt3.1 sisyphus+319393.100.1.1 1682538783 installed <13>May 11 08:02:50 rpmi: libatk-gir-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>May 11 08:02:50 rpmi: libepoxy-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>May 11 08:02:50 rpmi: libusb-1.0.27-alt1 sisyphus+347412.100.1.1 1714739652 installed <13>May 11 08:02:50 rpmi: libopenblas-0.3.26-alt1 sisyphus+339579.140.3.1 1706872442 installed <13>May 11 08:02:50 rpmi: libwayland-server-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>May 11 08:02:50 rpmi: perl-LWP-MediaTypes-6.04-alt1 sisyphus+225468.100.1.1 1553186684 installed <13>May 11 08:02:50 rpmi: perl-Compress-Raw-Zlib-2.206-alt1 sisyphus+335067.600.1.1 1700901614 installed <13>May 11 08:02:50 rpmi: perl-libnet-1:3.15-alt1 sisyphus+317310.100.1.1 1679580208 installed <13>May 11 08:02:50 rpmi: perl-XML-SAX-Base-1.09-alt1 1494364363 installed <13>May 11 08:02:50 rpmi: gtk-builder-convert-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>May 11 08:02:50 rpmi: libgirepository1.0-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>May 11 08:02:50 rpmi: python3-module-Pygments-2.18.0-alt1 sisyphus+347552.100.1.1 1714992955 installed <13>May 11 08:02:50 rpmi: libsqlite3-3.44.2-alt1 sisyphus+335409.100.3.3 1701347861 installed <13>May 11 08:02:50 rpmi: libnspr-1:4.35-alt1 sisyphus+308164.100.1.1 1665397042 installed <13>May 11 08:02:50 rpmi: python3-module-pkg_resources-1:69.5.1-alt1 sisyphus+345209.100.2.1 1713349328 installed <13>May 11 08:02:51 rpmi: libicu74-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>May 11 08:02:51 rpmi: libgomp1-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>May 11 08:02:51 rpmi: libltdl7-2.4.7-alt5 sisyphus+341963.200.3.1 1711659248 installed <13>May 11 08:02:51 rpmi: libopenjpeg2.0-2.5.2-alt1 sisyphus+341637.100.1.1 1709150019 installed <13>May 11 08:02:51 rpmi: libverto-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>May 11 08:02:51 rpmi: libcom_err-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>May 11 08:02:51 rpmi: libbrotlicommon-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>May 11 08:02:51 rpmi: libbrotlidec-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>May 11 08:02:51 rpmi: libgraphite2-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>May 11 08:02:51 rpmi: libharfbuzz-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>May 11 08:02:51 rpmi: libfreetype-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>May 11 08:02:51 rpmi: libfontconfig1-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>May 11 08:02:51 rpmi: libharfbuzz-gobject-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>May 11 08:02:51 rpmi: libharfbuzz-gir-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>May 11 08:02:51 rpmi: libXau-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>May 11 08:02:51 rpmi: libXau-devel-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>May 11 08:02:51 rpmi: fontconfig-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed Updating fonts cache: <29>May 11 08:02:53 fontconfig: Updating fonts cache: succeeded [ DONE ] <13>May 11 08:02:53 rpmi: libraqm-0.7.1-alt1 sisyphus+279320.100.1.2 1626503405 installed <13>May 11 08:02:53 rpmi: libharfbuzz-icu-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>May 11 08:02:53 rpmi: libgraphite2-devel-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>May 11 08:02:53 rpmi: libbrotlienc-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>May 11 08:02:53 rpmi: libcom_err-devel-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>May 11 08:02:53 rpmi: libverto-devel-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>May 11 08:02:53 rpmi: libraw-0.21.2-alt1 sisyphus+336806.100.1.1 1703007433 installed <13>May 11 08:02:53 rpmi: icu-utils-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>May 11 08:02:53 rpmi: libicu-devel-1:7.4.2-alt1 sisyphus+336372.200.1.1 1702422879 installed <13>May 11 08:02:53 rpmi: libnss-3.99-alt1 sisyphus+344230.420.10.1 1712506109 installed <13>May 11 08:02:53 rpmi: python3-module-nss-1.0.1-alt7 sisyphus+333513.61400.73.1 1704655181 installed <13>May 11 08:02:53 rpmi: libICE-devel-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>May 11 08:02:53 rpmi: libSM-devel-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>May 11 08:02:53 rpmi: kmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>May 11 08:02:53 rpmi: libquadmath13-devel-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>May 11 08:02:53 rpmi: libquadmath-devel-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>May 11 08:02:53 rpmi: libboost_charconv1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libgfortran5-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>May 11 08:02:53 rpmi: tcl-devel-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>May 11 08:02:53 rpmi: libpng-devel-1.6.42-alt2 sisyphus+339555.100.1.1 1706781690 installed <13>May 11 08:02:53 rpmi: perl-File-Listing-6.16-alt1 sisyphus+325783.100.1.1 1690559356 installed <13>May 11 08:02:53 rpmi: libboost_atomic1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libboost_contract1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libboost_chrono1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libboost_timer1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libboost_thread1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libboost_type_erasure1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libOpenGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>May 11 08:02:53 rpmi: libGLES-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>May 11 08:02:53 rpmi: libwayland-cursor-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>May 11 08:02:53 rpmi: libwayland-egl-4:18.1.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>May 11 08:02:53 rpmi: groff-base-1.22.3-alt2 sisyphus+275306.100.2.1 1624538359 installed <13>May 11 08:02:53 rpmi: libpipeline-1.5.7-alt1_1 sisyphus+312433.100.1.1 1671879776 installed <13>May 11 08:02:53 rpmi: libmodbus-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>May 11 08:02:53 rpmi: openldap-common-2.6.7-alt2 sisyphus+347731.100.1.1 1715194911 installed <13>May 11 08:02:53 rpmi: wayland-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>May 11 08:02:53 rpmi: libwayland-client-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>May 11 08:02:53 rpmi: libxkbcommon-1.7.0-alt1.1 sisyphus+343672.100.1.1 1711490815 installed <13>May 11 08:02:53 rpmi: libgudev-1:238-alt1 sisyphus+324364.100.1.1 1688646145 installed <13>May 11 08:02:53 rpmi: libboost_python3-1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:53 rpmi: libxblas-1.0.248-alt2 sisyphus+285045.40.2.1 1631388462 installed <13>May 11 08:02:54 rpmi: liblapack-1:3.8.0-alt7 sisyphus+340675.300.1.1 1707908362 installed <13>May 11 08:02:54 rpmi: python3-module-numpy-1:1.26.4-alt1 sisyphus+341164.200.2.1 1708505996 installed <13>May 11 08:02:54 rpmi: libboost_numpy3-1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:02:54 rpmi: libxshmfence-1.3.2-alt1 sisyphus+311428.400.1.1 1670577529 installed <13>May 11 08:02:54 rpmi: libpciaccess-1:0.18.1-alt1 sisyphus+343583.300.1.1 1711440792 installed <13>May 11 08:02:54 rpmi: libdrm-1:2.4.120-alt1 sisyphus+338137.100.1.2 1705653180 installed <13>May 11 08:02:54 rpmi: less-633-alt1 sisyphus+328181.300.2.1 1693321749 installed <13>May 11 08:02:54 rpmi: perl-Try-Tiny-0.31-alt1 sisyphus+290597.100.1.1 1637915507 installed <13>May 11 08:02:54 rpmi: perl-IO-Socket-IP-0.42-alt1 sisyphus+325815.100.1.2 1690571193 installed <13>May 11 08:02:54 rpmi: perl-Module-Load-0.36-alt1 sisyphus+258992.100.1.1 1601543407 installed <13>May 11 08:02:54 rpmi: perl-Compress-Raw-Bzip2-2.210-alt1 sisyphus+343108.100.1.3 1710881036 installed <13>May 11 08:02:54 rpmi: perl-IO-Compress-Brotli-2:0.004001-alt3 sisyphus+335067.1200.1.1 1700901700 installed <13>May 11 08:02:54 rpmi: perl-Clone-0.46-alt1 sisyphus+335067.1100.1.1 1700901674 installed <13>May 11 08:02:54 rpmi: perl-HTML-Tagset-3.24-alt1 sisyphus+343117.100.1.3 1710883587 installed <13>May 11 08:02:54 rpmi: perl-Term-ANSIColor-5.01-alt1 sisyphus+244783.100.1.2 1579747505 installed <13>May 11 08:02:54 rpmi: perl-Data-Dump-1.25-alt1 sisyphus+276551.100.1.1 1625126880 installed <13>May 11 08:02:54 rpmi: perl-Filter-1.64-alt1 sisyphus+335067.400.1.1 1700901530 installed <13>May 11 08:02:54 rpmi: perl-Encode-3.21-alt1 sisyphus+343095.100.1.1 1710875480 installed <13>May 11 08:02:54 rpmi: perl-URI-5.27-alt1 sisyphus+340901.100.1.1 1708180683 installed <13>May 11 08:02:54 rpmi: perl-IO-Compress-2.206-alt1 sisyphus+325819.100.1.1 1690563199 installed <13>May 11 08:02:54 rpmi: perl-Net-HTTP-6.23-alt1 sisyphus+323470.100.1.1 1687422469 installed <13>May 11 08:02:54 rpmi: perl-HTML-Parser-3.82-alt1 sisyphus+343116.100.1.3 1710883258 installed <13>May 11 08:02:54 rpmi: perl-WWW-RobotRules-6.02-alt1 1329756211 installed <13>May 11 08:02:54 rpmi: perl-Encode-Locale-1.05-alt1 1444608613 installed <13>May 11 08:02:54 rpmi: perl-IO-HTML-1.004-alt1 sisyphus+258983.100.1.1 1601542619 installed <13>May 11 08:02:54 rpmi: perl-HTTP-Message-6.45-alt1 sisyphus+330728.100.1.1 1696162276 installed <13>May 11 08:02:54 rpmi: perl-HTTP-Negotiate-6.01-alt1 1329760563 installed <13>May 11 08:02:54 rpmi: perl-libwww-6.77-alt1 sisyphus+343120.100.1.2 1710884405 installed <13>May 11 08:02:54 rpmi: perl-XML-LibXML-2.0210-alt5 sisyphus+347351.100.1.1 1714672301 installed <13>May 11 08:02:54 rpmi: perl-XML-SAX-1.02-alt1 sisyphus+232322.100.1.1 1560758406 installed <13>May 11 08:02:54 rpmi: perl-XML-Simple-2.25-alt2 sisyphus+257498.100.1.1 1599324034 installed <13>May 11 08:02:54 rpmi: icon-naming-utils-0.8.90-alt1 sisyphus+276851.100.1.1 1625243947 installed <13>May 11 08:02:55 rpmi: icon-theme-adwaita-46.0-alt1 sisyphus+343025.200.4.2 1710847162 installed <13>May 11 08:02:55 rpmi: perl-XML-Parser-2.47-alt1 sisyphus+337612.100.1.1 1704201438 installed <13>May 11 08:02:55 rpmi: usbids-20240206-alt1 sisyphus+339943.100.1.1 1707270512 installed <13>May 11 08:02:55 rpmi: pciids-20240429-alt1 sisyphus+347144.100.1.1 1714367867 installed <13>May 11 08:02:55 rpmi: hwdata-0.374-alt1 sisyphus+329322.100.1.1 1694450297 installed <13>May 11 08:02:55 rpmi: gtk+3-themes-incompatible-3.20-alt3 1461944560 installed <13>May 11 08:02:55 rpmi: libffi-devel-1:3.4.6-alt1 sisyphus+341904.100.1.1 1709474536 installed <13>May 11 08:02:55 rpmi: python3-module-zipp-3.18.1-alt1 sisyphus+342979.100.2.1 1710837966 installed <13>May 11 08:02:55 rpmi: python3-module-importlib-metadata-7.1.0-alt1 sisyphus+343253.100.1.1 1711017097 installed <13>May 11 08:02:55 rpmi: python3-module-markdown-3.6-alt1 sisyphus+342748.100.1.1 1710451241 installed <13>May 11 08:02:55 rpmi: python3-module-polib-1.1.1-alt1 sisyphus+282657.100.1.1 1628954165 installed <13>May 11 08:02:55 rpmi: python3-module-click-8.1.7-alt1 sisyphus+327424.100.2.1 1695395098 installed <13>May 11 08:02:55 rpmi: python3-module-chameleon.core-4.5.2-alt1 sisyphus+339420.100.1.1 1706650227 installed <13>May 11 08:02:55 rpmi: python3-module-lingua-4.15.0-alt3 sisyphus+339340.100.1.1 1706573397 installed <13>May 11 08:02:56 rpmi: python3-module-babel-1:2.14.0-alt1.1 sisyphus+342546.1400.3.1 1710867888 installed <13>May 11 08:02:56 rpmi: python3-module-markupsafe-1:2.1.5-alt1 sisyphus+339663.100.1.1 1706899589 installed <13>May 11 08:02:56 rpmi: python3-module-pycparser-2.21-alt1.1 sisyphus+309935.7300.4.1 1668527005 installed <13>May 11 08:02:56 rpmi: python3-module-cffi-1.16.0-alt1 sisyphus+333513.10400.71.1 1704540321 installed <13>May 11 08:02:56 rpmi: python3-module-cryptography-42.0.5-alt1 sisyphus+341498.100.1.1 1709027854 installed <13>May 11 08:02:56 rpmi: python3-module-beaker-1.12.1-alt1 sisyphus+319143.100.1.1 1682256768 installed <13>May 11 08:02:56 rpmi: python3-module-mako-1.3.3-alt1 sisyphus+344943.100.1.1 1712847267 installed <13>May 11 08:02:56 rpmi: libpython3-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>May 11 08:02:56 rpmi: libncurses6-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>May 11 08:02:56 rpmi: libtinfo-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>May 11 08:02:56 rpmi: libncurses-devel-6.3.20220618-alt4 sisyphus+327286.4600.14.1 1711486782 installed <13>May 11 08:02:57 rpmi: python3-dev-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>May 11 08:02:58 rpmi: python3-module-setuptools-1:69.5.1-alt1 sisyphus+345209.100.2.1 1713349328 installed <13>May 11 08:02:58 rpmi: gcc-c++-common-1.4.27-alt1 sisyphus+278099.1300.1.1 1626028636 installed <13>May 11 08:02:58 rpmi: libstdc++13-devel-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>May 11 08:02:59 rpmi: gcc13-c++-13.2.1-alt3 sisyphus+339335.100.1.1 1706563095 installed <13>May 11 08:02:59 rpmi: python3-module-packaging-24.0-alt1 sisyphus+342487.100.2.1 1710407438 installed <13>May 11 08:02:59 rpmi: libdevmapper-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>May 11 08:02:59 rpmi: mount-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>May 11 08:02:59 rpmi: losetup-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>May 11 08:02:59 rpmi: lsblk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>May 11 08:02:59 rpmi: dmsetup-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <86>May 11 08:02:59 groupadd[3443404]: group added to /etc/group: name=tape, GID=999 <86>May 11 08:02:59 groupadd[3443404]: group added to /etc/gshadow: name=tape <86>May 11 08:02:59 groupadd[3443404]: new group: name=tape, GID=999 <86>May 11 08:02:59 groupadd[3443426]: group added to /etc/group: name=dialout, GID=998 <86>May 11 08:02:59 groupadd[3443426]: group added to /etc/gshadow: name=dialout <86>May 11 08:02:59 groupadd[3443426]: new group: name=dialout, GID=998 <86>May 11 08:02:59 groupadd[3443471]: group added to /etc/group: name=input, GID=997 <86>May 11 08:02:59 groupadd[3443471]: group added to /etc/gshadow: name=input <86>May 11 08:02:59 groupadd[3443471]: new group: name=input, GID=997 <86>May 11 08:02:59 groupadd[3443510]: group added to /etc/group: name=video, GID=996 <86>May 11 08:02:59 groupadd[3443510]: group added to /etc/gshadow: name=video <86>May 11 08:02:59 groupadd[3443510]: new group: name=video, GID=996 <86>May 11 08:02:59 groupadd[3443545]: group added to /etc/group: name=render, GID=995 <86>May 11 08:02:59 groupadd[3443545]: group added to /etc/gshadow: name=render <86>May 11 08:02:59 groupadd[3443545]: new group: name=render, GID=995 <86>May 11 08:02:59 groupadd[3443558]: group added to /etc/group: name=sgx, GID=994 <86>May 11 08:02:59 groupadd[3443558]: group added to /etc/gshadow: name=sgx <86>May 11 08:02:59 groupadd[3443558]: new group: name=sgx, GID=994 <13>May 11 08:03:00 rpmi: udev-1:254.10-alt2 sisyphus+345302.400.3.1 1713818601 installed <13>May 11 08:03:00 rpmi: dconf-profile-0.1-alt1 sisyphus+325633.340.3.1 1690415358 installed <13>May 11 08:03:00 rpmi: boost-python-headers-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_context1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_fiber1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_stacktrace1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_nowide1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_url1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_test1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_serialization1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_random1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_iostreams1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_json1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_regex1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_graph1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_date_time1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:00 rpmi: libboost_container1.85.0-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:02 rpmi: boost-devel-headers-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229637 installed <13>May 11 08:03:02 rpmi: boost-devel-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:02 rpmi: systemd-modules-common-1:254.10-alt2 sisyphus+345302.400.3.1 1713818564 installed <13>May 11 08:03:02 rpmi: systemd-sysctl-common-1:254.10-alt2 sisyphus+345302.400.3.1 1713818601 installed <13>May 11 08:03:02 rpmi: systemd-tmpfiles-common-1:254.10-alt2 sisyphus+345302.400.3.1 1713818564 installed <13>May 11 08:03:02 rpmi: systemd-utils-filetriggers-1:254.10-alt2 sisyphus+345302.400.3.1 1713818564 installed <13>May 11 08:03:02 rpmi: libfdisk-2.39.2-alt1 sisyphus+327286.4500.14.1 1711486360 installed <13>May 11 08:03:02 rpmi: systemd-utils-standalone-1:254.10-alt2 sisyphus+345302.400.3.1 1713818601 installed <13>May 11 08:03:02 rpmi: libgc-8.2.6-alt1 sisyphus+340965.100.1.1 1708275751 installed <13>May 11 08:03:02 rpmi: libmaa-1.4.7-alt6 sisyphus+340364.100.1.1 1707550842 installed <13>May 11 08:03:02 rpmi: dict-1:1.13.1-alt2 sisyphus+340952.100.1.1 1708270449 installed <13>May 11 08:03:02 rpmi: w3m-0.5.3-alt4.git20200502 sisyphus+328124.5000.1.1 1693253320 installed <13>May 11 08:03:02 rpmi: sgml-common-0.6.3-alt15 sisyphus+276099.100.1.1 1624817971 installed <13>May 11 08:03:02 rpmi: docbook-dtds-4.5-alt1 sisyphus+276837.100.1.1 1625242123 installed <13>May 11 08:03:03 rpmi: docbook-style-xsl-1.79.1-alt4 sisyphus+232871.100.1.1 1561238010 installed <13>May 11 08:03:03 rpmi: libxslt-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>May 11 08:03:03 rpmi: xsltproc-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>May 11 08:03:03 rpmi: asciidoc-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>May 11 08:03:03 rpmi: libImageMagick7-common-7.1.1.31-alt1 sisyphus+347305.100.1.1 1714654712 installed <13>May 11 08:03:03 rpmi: libwmflite-0.2.8.4-alt13 sisyphus+275127.100.1.1 1624406848 installed <13>May 11 08:03:03 rpmi: liblqr-0.4.2-alt1 sisyphus+276247.100.1.2 1624927462 installed <13>May 11 08:03:03 rpmi: highway-libs-1.1.0-alt1 sisyphus+341019.100.4.1 1708516183 installed <13>May 11 08:03:03 rpmi: libjbig2.1-2.1-alt2 sisyphus+326386.40.6.1 1691148232 installed <13>May 11 08:03:03 rpmi: djvu-common-3.5.28-alt2 sisyphus+297715.100.1.1 1648887081 installed <13>May 11 08:03:03 rpmi: libdjvu-3.5.28-alt2 sisyphus+297715.100.1.1 1648887083 installed <13>May 11 08:03:03 rpmi: libdav1d_7-1.4.1-alt1 sisyphus+344157.100.2.1 1711988264 installed <13>May 11 08:03:03 rpmi: libgts-0.7.6-alt2.drc20130205.1 sisyphus+275722.100.1.1 1624749871 installed <13>May 11 08:03:03 rpmi: libpaper2-2:2.1.3-alt1 sisyphus+340967.100.1.1 1708276734 installed <13>May 11 08:03:03 rpmi: liblmdb-0.9.32-alt1 sisyphus+342426.100.1.1 1710124284 installed <13>May 11 08:03:03 rpmi: libkeyutils-1.6.3-alt1 sisyphus+266061.100.1.1 1612919567 installed <86>May 11 08:03:03 groupadd[3446578]: group added to /etc/group: name=_keytab, GID=993 <86>May 11 08:03:03 groupadd[3446578]: group added to /etc/gshadow: name=_keytab <86>May 11 08:03:03 groupadd[3446578]: new group: name=_keytab, GID=993 <13>May 11 08:03:03 rpmi: libkrb5-1.21.2-alt2 sisyphus+338902.100.2.1 1706700985 installed <86>May 11 08:03:03 groupadd[3446704]: group added to /etc/group: name=sasl, GID=992 <86>May 11 08:03:03 groupadd[3446704]: group added to /etc/gshadow: name=sasl <86>May 11 08:03:03 groupadd[3446704]: new group: name=sasl, GID=992 <13>May 11 08:03:03 rpmi: libsasl2-3-2.1.28-alt2 sisyphus+343335.100.1.1 1711112524 installed <13>May 11 08:03:03 rpmi: libldap2-2.6.7-alt2 sisyphus+347731.100.1.1 1715194925 installed <13>May 11 08:03:03 rpmi: libkrb5-ldap-1.21.2-alt2 sisyphus+338902.100.2.1 1706700985 installed <13>May 11 08:03:03 rpmi: libkrb5-devel-1.21.2-alt2 sisyphus+338902.100.2.1 1706700985 installed <13>May 11 08:03:03 rpmi: libtirpc-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>May 11 08:03:03 rpmi: liblz4-1:1.9.4-alt1 sisyphus+309416.100.1.1 1667413000 installed <13>May 11 08:03:03 rpmi: libsystemd-1:254.10-alt2 sisyphus+345302.400.3.1 1713818601 installed <13>May 11 08:03:03 rpmi: libdbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>May 11 08:03:03 rpmi: libavahi-0.8-alt4 sisyphus+344258.100.1.1 1712133862 installed <13>May 11 08:03:03 rpmi: libcups-2.4.8-alt1 sisyphus+347633.100.1.1 1715081275 installed <13>May 11 08:03:03 rpmi: dbus-tools-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <86>May 11 08:03:03 groupadd[3446890]: group added to /etc/group: name=messagebus, GID=991 <86>May 11 08:03:03 groupadd[3446890]: group added to /etc/gshadow: name=messagebus <86>May 11 08:03:03 groupadd[3446890]: new group: name=messagebus, GID=991 <86>May 11 08:03:03 useradd[3446937]: new user: name=messagebus, UID=999, GID=991, home=/run/dbus, shell=/dev/null, from=none <13>May 11 08:03:03 rpmi: dbus-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>May 11 08:03:03 rpmi: icon-theme-hicolor-0.17-alt2 sisyphus+248343.100.1.1 1584979043 installed <13>May 11 08:03:04 rpmi: libgtk+2-locales-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>May 11 08:03:04 rpmi: libnuma-2.0.14-alt2 sisyphus+278485.100.1.1 1626104243 installed <13>May 11 08:03:04 rpmi: libx265-199-3.5-alt1.1 sisyphus+277560.100.1.1 1625696944 installed <13>May 11 08:03:04 rpmi: libdeflate-1.20-alt1 sisyphus+343488.100.1.1 1711323986 installed <13>May 11 08:03:04 rpmi: libtiff5-4.4.0-alt4 sisyphus+322581.100.1.2 1686180093 installed <13>May 11 08:03:06 rpmi: libgs-10.01.1-alt2 sisyphus+337968.300.3.1 1705654987 installed <13>May 11 08:03:06 rpmi: libgdk-pixbuf-locales-2.42.11-alt1 sisyphus+345586.100.1.1 1713719119 installed <13>May 11 08:03:06 rpmi: libde265-1.0.15-alt1 sisyphus+337190.100.1.1 1703502097 installed <13>May 11 08:03:06 rpmi: libaom3-3.5.0-alt2 sisyphus+335780.100.1.1 1701761523 installed <13>May 11 08:03:06 rpmi: libdatrie-0.2.13-alt1_7 sisyphus+328221.100.1.1 1693336967 installed <13>May 11 08:03:06 rpmi: libthai-0.1.29-alt1_6 sisyphus+328230.100.1.2 1693348044 installed <13>May 11 08:03:06 rpmi: desktop-file-utils-0.26-alt6 sisyphus+331944.100.1.3 1697550035 installed <13>May 11 08:03:06 rpmi: shared-mime-info-2.4-alt1 sisyphus+334259.100.1.1 1699787317 installed <13>May 11 08:03:06 rpmi: gsettings-desktop-schemas-data-46.0-alt1 sisyphus+343025.100.4.2 1710847127 installed <13>May 11 08:03:06 rpmi: libgio-2.80.2-alt1 sisyphus+347748.200.2.1 1715237858 installed <13>May 11 08:03:06 rpmi: gsettings-desktop-schemas-46.0-alt1 sisyphus+343025.100.4.2 1710847126 installed <13>May 11 08:03:06 rpmi: glib2-devel-2.80.2-alt1 sisyphus+347748.200.2.1 1715237858 installed <13>May 11 08:03:06 rpmi: libgdk-pixbuf-2.42.11-alt1 sisyphus+345586.100.1.1 1713719121 installed <13>May 11 08:03:06 rpmi: libgio-devel-2.80.2-alt1 sisyphus+347748.200.2.1 1715237858 installed <13>May 11 08:03:06 rpmi: libgdk-pixbuf-devel-2.42.11-alt1 sisyphus+345586.100.1.1 1713719121 installed <13>May 11 08:03:06 rpmi: libatk-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>May 11 08:03:06 rpmi: libheif-1.17.6-alt1 sisyphus+337190.200.1.1 1703502143 installed <13>May 11 08:03:06 rpmi: gtk4-update-icon-cache-4.14.4-alt1 sisyphus+347397.300.1.1 1714734176 installed <13>May 11 08:03:06 rpmi: libgdk-pixbuf-gir-2.42.11-alt1 sisyphus+345586.100.1.1 1713719121 installed <13>May 11 08:03:06 rpmi: libgdk-pixbuf-gir-devel-2.42.11-alt1 sisyphus+345586.100.1.1 1713719119 installed <13>May 11 08:03:06 rpmi: libatk-gir-devel-2.52.0-alt1 sisyphus+342903.100.1.1 1710606492 installed <13>May 11 08:03:06 rpmi: libgirepository1.0-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>May 11 08:03:06 rpmi: gobject-introspection-devel-1.80.1-alt1 sisyphus+344154.100.1.3 1711984697 installed <13>May 11 08:03:06 rpmi: libdconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>May 11 08:03:06 rpmi: dconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>May 11 08:03:06 rpmi: libgtk+3-schemas-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365587 installed <13>May 11 08:03:06 rpmi: libjson-glib-1.8.0-alt1 sisyphus+325066.600.6.2 1695204016 installed <13>May 11 08:03:06 rpmi: libgusb-0.4.9-alt1 sisyphus+345693.100.1.1 1713857462 installed <13>May 11 08:03:06 rpmi: libcolord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039037 installed <13>May 11 08:03:06 rpmi: libpolkit-124-alt1 sisyphus+340067.100.1.1 1707374992 installed <86>May 11 08:03:06 groupadd[3450865]: group added to /etc/group: name=colord, GID=990 <86>May 11 08:03:06 groupadd[3450865]: group added to /etc/gshadow: name=colord <86>May 11 08:03:06 groupadd[3450865]: new group: name=colord, GID=990 <86>May 11 08:03:06 useradd[3450912]: new user: name=colord, UID=998, GID=990, home=/var/colord, shell=/dev/null, from=none <13>May 11 08:03:07 rpmi: colord-1.4.7-alt1.1 sisyphus+338793.100.1.1 1706039037 installed <13>May 11 08:03:07 rpmi: libpixman-3:0.43.4-alt2 sisyphus+344164.100.1.1 1711987947 installed <13>May 11 08:03:07 rpmi: libX11-locales-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440719 installed <13>May 11 08:03:07 rpmi: libXdmcp-1.1.5-alt1 sisyphus+343583.700.1.1 1711441073 installed <13>May 11 08:03:07 rpmi: libxcb-1.17.0-alt1 sisyphus+345308.200.1.1 1713342009 installed <13>May 11 08:03:07 rpmi: libX11-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440722 installed <13>May 11 08:03:07 rpmi: libXext-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441114 installed <13>May 11 08:03:07 rpmi: libXrender-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>May 11 08:03:07 rpmi: libcairo-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>May 11 08:03:07 rpmi: libcairo-gobject-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>May 11 08:03:07 rpmi: libXt-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>May 11 08:03:07 rpmi: libXfixes-6.0.1-alt1 sisyphus+331490.300.1.1 1697023235 installed <13>May 11 08:03:07 rpmi: libXft-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>May 11 08:03:07 rpmi: libpango-1.52.2-alt1 sisyphus+344075.100.1.1 1711911780 installed <13>May 11 08:03:07 rpmi: libXi-1.8-alt1 sisyphus+285490.200.1.1 1632124180 installed <13>May 11 08:03:07 rpmi: libXinerama-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>May 11 08:03:07 rpmi: libat-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>May 11 08:03:08 rpmi: librsvg-1:2.58.91-alt1 sisyphus+345985.100.1.1 1714236707 installed <13>May 11 08:03:08 rpmi: libpango-gir-1.52.2-alt1 sisyphus+344075.100.1.1 1711911780 installed <13>May 11 08:03:08 rpmi: libtk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>May 11 08:03:08 rpmi: tk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>May 11 08:03:08 rpmi: libXcursor-1.2.2-alt1 sisyphus+343583.600.1.1 1711441036 installed <13>May 11 08:03:08 rpmi: libXpm-3.5.17-alt1 sisyphus+330921.100.1.1 1696400258 installed <13>May 11 08:03:08 rpmi: libXmu-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441186 installed <13>May 11 08:03:08 rpmi: libXrandr-1.5.4-alt1 sisyphus+330992.100.1.1 1696485401 installed <13>May 11 08:03:08 rpmi: libXcomposite-0.4.6-alt1 sisyphus+311188.200.1.1 1670233684 installed <13>May 11 08:03:08 rpmi: libXdamage-1.1.6-alt1 sisyphus+311188.300.1.1 1670233713 installed <13>May 11 08:03:08 rpmi: libgtk+2-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>May 11 08:03:10 rpmi: libxcb-devel-1.17.0-alt1 sisyphus+345308.200.1.1 1713342009 installed <13>May 11 08:03:10 rpmi: libX11-devel-3:1.8.8-alt1 sisyphus+343583.100.1.1 1711440722 installed <13>May 11 08:03:10 rpmi: libXrender-devel-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>May 11 08:03:10 rpmi: libXt-devel-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>May 11 08:03:10 rpmi: libXmu-devel-1.2.0-alt1 sisyphus+343583.1200.1.1 1711441186 installed <13>May 11 08:03:10 rpmi: libXext-devel-1.3.6-alt1 sisyphus+343583.1000.1.1 1711441114 installed <13>May 11 08:03:10 rpmi: libXaw-1.0.16-alt1 sisyphus+343583.400.1.1 1711440837 installed <13>May 11 08:03:10 rpmi: libgd3-2.3.3-alt2 sisyphus+335387.100.1.1 1701278647 installed <13>May 11 08:03:10 rpmi: tcl-tix-8.4.3-alt4 sisyphus+277292.300.2.1 1625442551 installed <13>May 11 08:03:10 rpmi: at-spi2-atk-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>May 11 08:03:10 rpmi: liblasi-1.1.3-alt3 sisyphus+286812.100.2.1 1633968134 installed <13>May 11 08:03:10 rpmi: libgraphviz-11.0.0-alt2 sisyphus+347657.100.1.1 1715096097 installed <13>May 11 08:03:10 rpmi: libharfbuzz-cairo-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>May 11 08:03:10 rpmi: fontconfig-devel-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>May 11 08:03:10 rpmi: libfreetype-devel-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>May 11 08:03:10 rpmi: libcairo-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>May 11 08:03:10 rpmi: libharfbuzz-devel-8.4.0-alt1 sisyphus+344161.100.1.1 1711987969 installed <13>May 11 08:03:10 rpmi: libharfbuzz-gir-devel-8.4.0-alt1 sisyphus+344161.100.1.1 1711987962 installed <13>May 11 08:03:10 rpmi: libpango-gir-devel-1.52.2-alt1 sisyphus+344075.100.1.1 1711911777 installed <13>May 11 08:03:10 rpmi: libcairo-gobject-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>May 11 08:03:10 rpmi: libXft-devel-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>May 11 08:03:10 rpmi: libpango-devel-1.52.2-alt1 sisyphus+344075.100.1.1 1711911780 installed <13>May 11 08:03:10 rpmi: libXtst-1.2.4-alt1 sisyphus+308663.1300.1.1 1666168504 installed <13>May 11 08:03:10 rpmi: libXxf86vm-1.1.5-alt1 sisyphus+308663.1400.1.1 1666168534 installed <13>May 11 08:03:11 rpmi: libGLX-mesa-4:24.0.6-alt1 sisyphus+345881.100.1.1 1714144957 installed <13>May 11 08:03:11 rpmi: libGLX-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>May 11 08:03:11 rpmi: libGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>May 11 08:03:11 rpmi: libGLU-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>May 11 08:03:11 rpmi: dbus-tools-gui-1.14.10-alt1 sisyphus+327286.5700.14.1 1711487513 installed <13>May 11 08:03:11 rpmi: xprop-1.2.5-alt1 sisyphus+279025.100.1.1 1626354193 installed <13>May 11 08:03:11 rpmi: at-spi2-core-2.52.0-alt1 sisyphus+342903.100.1.1 1710606495 installed <13>May 11 08:03:11 rpmi: libgtk+3-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365614 installed <13>May 11 08:03:11 rpmi: libgtk+3-gir-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365614 installed <13>May 11 08:03:11 rpmi: libgtk+3-devel-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365614 installed <13>May 11 08:03:11 rpmi: libgbm-4:24.0.6-alt1 sisyphus+345881.100.1.1 1714144957 installed <13>May 11 08:03:12 rpmi: libEGL-mesa-4:24.0.6-alt1 sisyphus+345881.100.1.1 1714144957 installed <13>May 11 08:03:12 rpmi: libEGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>May 11 08:03:12 rpmi: libglvnd-devel-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>May 11 08:03:12 rpmi: libiex30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>May 11 08:03:12 rpmi: libilmthread30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>May 11 08:03:12 rpmi: libimath29-3.1.6-alt4 sisyphus+340273.100.1.2 1707542785 installed <13>May 11 08:03:12 rpmi: libopenexr30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>May 11 08:03:12 rpmi: libjxl-pixbuf-loader-0.10.2-alt1 sisyphus+342296.100.1.1 1709909585 installed <13>May 11 08:03:12 rpmi: libjxl0.10-0.10.2-alt1 sisyphus+342296.100.1.1 1709909585 installed <13>May 11 08:03:12 rpmi: libImageMagick7.10-7.1.1.31-alt1 sisyphus+347305.100.1.1 1714654712 installed <13>May 11 08:03:12 rpmi: ImageMagick-tools-7.1.1.31-alt1 sisyphus+347305.100.1.1 1714654712 installed <13>May 11 08:03:12 rpmi: libGL-devel-4:24.0.6-alt1 sisyphus+345881.100.1.1 1714144957 installed <13>May 11 08:03:12 rpmi: libGLU-devel-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>May 11 08:03:12 rpmi: libepoxy-devel-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>May 11 08:03:12 rpmi: libgtk+3-gir-devel-3.24.41-alt1.1 sisyphus+343530.100.1.1 1711365587 installed <13>May 11 08:03:12 rpmi: python3-module-pygobject3-3.48.2-alt1 sisyphus+344585.100.1.1 1712400549 installed <13>May 11 08:03:12 rpmi: libgtk+2-devel-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>May 11 08:03:12 rpmi: python3-modules-tkinter-3.12.2-alt1 sisyphus+341702.200.1.1 1709232959 installed <13>May 11 08:03:12 rpmi: libXaw-devel-1.0.16-alt1 sisyphus+343583.400.1.1 1711440837 installed <13>May 11 08:03:12 rpmi: libXinerama-devel-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>May 11 08:03:12 rpmi: tk-devel-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>May 11 08:03:12 rpmi: bwidget-1.9.1-alt1 1314273552 installed <13>May 11 08:03:12 rpmi: tcl-img-1.4.14-alt1 sisyphus+316986.300.2.1 1679243176 installed <13>May 11 08:03:12 rpmi: libtirpc-devel-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>May 11 08:03:12 rpmi: asciidoc-a2x-10.2.0-alt1 sisyphus+339930.100.1.1 1707225770 installed <13>May 11 08:03:12 rpmi: boost-lockfree-devel-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229637 installed <13>May 11 08:03:12 rpmi: boost-python3-devel-1:1.85.0-alt2 sisyphus+345245.76.7.1 1714229757 installed <13>May 11 08:03:12 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>May 11 08:03:12 rpmi: intltool-0.51.0-alt2 1513698802 installed <13>May 11 08:03:13 rpmi: man-db-2.12.0-alt1 sisyphus+336930.2100.1.1 1703107336 installed <13>May 11 08:03:13 rpmi: libmodbus-devel-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>May 11 08:03:13 rpmi: libusb-devel-1.0.27-alt1 sisyphus+347412.100.1.1 1714739652 installed <13>May 11 08:03:13 rpmi: tclx-1:8.4.4-alt1 sisyphus+251935.100.1.1 1589842635 installed <13>May 11 08:03:13 rpmi: xorg-cf-files-1.0.7-alt3 sisyphus+299066.100.1.1 1650986802 installed <13>May 11 08:03:13 rpmi: python3-module-yapps2-2.2.0-alt2 sisyphus+281199.100.1.1 1627462968 installed <13>May 11 08:03:13 rpmi: libudev-devel-1:254.10-alt2 sisyphus+345302.400.3.1 1713818601 installed <13>May 11 08:03:13 rpmi: libreadline-devel-8.2.10-alt1 sisyphus+338911.100.4.1 1706717069 installed <13>May 11 08:03:13 rpmi: dos2unix-7.5.2-alt1 sisyphus+339342.100.1.1 1706585516 installed Building target platforms: i586 Building for target i586 Wrote: /usr/src/in/nosrpm/linuxcnc-2.9.2-alt4.20240203.nosrc.rpm (w1.gzdio) Installing linuxcnc-2.9.2-alt4.20240203.src.rpm Building target platforms: i586 Building for target i586 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.24883 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf linuxcnc-2.9.2 + echo 'Source #0 (linuxcnc-2.9.2.tar):' Source #0 (linuxcnc-2.9.2.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/linuxcnc-2.9.2.tar + cd linuxcnc-2.9.2 + /bin/chmod -c -Rf u+rwX,go-w . + echo 'Patch #0 (linuxcnc-2.9.2-alt4.20240203.patch):' Patch #0 (linuxcnc-2.9.2-alt4.20240203.patch): + /usr/bin/patch -p1 patching file .gear/rules patching file .gear/tags/list patching file .gear/upstream/remotes patching file lib/python/qtvcp/lib/virtual_keyboard.py patching file linuxcnc-documentation.desktop patching file linuxcnc.spec patching file scripts/linuxcnc_info.in patching file share/qtvcp/panels/test_panel/test_panel_handler.py patching file src/Makefile patching file src/Makefile.inc.in patching file src/configure.ac patching file src/m4/ax_boost_base.m4 patching file src/m4/ax_python.m4 + sed -i 's|lib/tcltk/linuxcnc|lib/tcl/linuxcnc|' lib/python/rs274/options.py + sed -i 's|INCLUDES := .|INCLUDES := . /usr/include/tirpc|' src/Makefile + sed -i 's|LDFLAGS := |LDFLAGS := -ltirpc |' src/Makefile + sed 's/ -o root//g' -i src/Makefile + find . -name '*.py' -exec dos2unix '{}' ';' dos2unix: converting file ./tests/trajectory-planner/circular-arcs/test-reverse.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/run_all_tests.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/machine_setup.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/linuxcnc_control.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/m61/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-with-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-no-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/tlo/test-ui.py to Unix format... dos2unix: converting file ./tests/statbuffer-g5x-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/startup-state/test-ui.py to Unix format... dos2unix: converting file ./tests/single-step/test-ui.py to Unix format... dos2unix: converting file ./tests/rs274ngc-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/subs.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/remap.py to Unix format... dos2unix: converting file ./tests/remap/spindle/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/spindle/remap.py to Unix format... dos2unix: converting file ./tests/remap/sequencing/permute.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/remap.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/remap.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/subs.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/namedparams.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/subs.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/oword.py to Unix format... dos2unix: converting file ./tests/remap/introspect/subs.py to Unix format... dos2unix: converting file ./tests/remap/introspect/oword.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/remap.py to Unix format... dos2unix: converting file ./tests/mqtt/display.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-joint/test-ui.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-axis/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/startup-gcode-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/mountaindew/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/basic/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/toplevel.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/remap.py to Unix format... dos2unix: converting file ./tests/mdi-queue-length/test-ui.py to Unix format... dos2unix: converting file ./tests/lathe/test-ui.py to Unix format... dos2unix: converting file ./tests/io-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/subs.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/oword.py to Unix format... dos2unix: converting file ./tests/interp/subroutine-return/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/python/error/canon.py to Unix format... dos2unix: converting file ./tests/interp/python-self/subs.py to Unix format... dos2unix: converting file ./tests/interp/python-self/oword.py to Unix format... dos2unix: converting file ./tests/interp/pymove/subs.py to Unix format... dos2unix: converting file ./tests/interp/pymove/oword.py to Unix format... dos2unix: converting file ./tests/interp/oword-mdi-sub-update/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/mdi-oword-m66/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/m98m99/12-M99-endless-main-program/test-ui.py to Unix format... dos2unix: converting file ./tests/hm2-idrom/check-dmesg.py to Unix format... dos2unix: converting file ./tests/hard-limits/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/mdi/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/jogging/test-ui.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_writer.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_test.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_reader.py to Unix format... dos2unix: converting file ./tests/halmodule.0/test.py to Unix format... dos2unix: converting file ./tests/hal-link-unlink/hallink.py to Unix format... dos2unix: converting file ./tests/ccomp/early-exit/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/stop-button-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/on_abort_command-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/g64/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/feed-rate/test-ui.py to Unix format... dos2unix: converting file ./src/po/fixpaths.py to Unix format... dos2unix: converting file ./src/modsilent.py to Unix format... dos2unix: converting file ./src/hal/utils/elbpcom.py to Unix format... dos2unix: converting file ./src/hal/user_comps/z_level_compensation.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzbc-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzac-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzab-tdr-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/scaragui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/rotarydelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/pumagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/puma560gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/millturngui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/melfagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/max5gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/maho600gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/lineardelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hexagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hbmgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/5axisgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/sim-torch.py to Unix format... dos2unix: converting file ./src/hal/user_comps/scorbot-er-3.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pyvcp.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pmx485.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mqtt-publisher.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mitsub_vfd.py to Unix format... dos2unix: converting file ./src/hal/user_comps/hal_input.py to Unix format... dos2unix: converting file ./src/hal/user_comps/gladevcp.py to Unix format... dos2unix: converting file ./src/hal/drivers/rbf2h.py to Unix format... dos2unix: converting file ./src/hal/drivers/mesa-hostmot2/modbus/modcompile.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/touchy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/listing.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/hal_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/filechooser.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/stepconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/import_mach.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtvcp/qtvcp.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac_gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-plasmac2qt.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-materials.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-cfg2prefs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/pmx485-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/pyui.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_validate.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_handler.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/master.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/commands.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/tests.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/private_data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pncconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/mdro/mdro.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/keybindings.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/gscreen.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/qt5_graphics.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/gremlin.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/player.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/notification.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/icon_theme_helper.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/gmoccapy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/getiniinfo.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/dialogs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/tracking-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/teach-in.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/linuxcnctop.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/lintini.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/image-to-gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/haltest.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/debuglevel.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis-remote.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/makeicon.py to Unix format... dos2unix: converting file ./src/emc/ini/update_ini.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/x1mill/x1mill_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/woodpecker/woodpecker_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qttouchy/qttouchy_handler.py to Unix format... dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py. dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py. dos2unix: converting file ./share/qtvcp/screens/qtplasmac/qtplasmac_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtplasmac/languages/qtplasmac.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtlathe/qtlathe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon/qtdragon_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtaxis/qtaxis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc/qt_cnc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/blender/blender_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_scara/vismach_scara_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/versaprobe/versaprobe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/tool_dialog/tool_dialog_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_probe/test_probe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_panel/test_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_led/test_led_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_dial/test_dial_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_button/test_button_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/spindle_belts/spindle_belts_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/sim_panel/sim_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/copy/copy_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/cam_align/cam_align_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/spartan/spartan_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/silverdragon/silverdragon_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/industrial/industrial_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis/gaxis_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/9_axis/9_axis_handler.py to Unix format... dos2unix: converting file ./scripts/torture.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/stdglue.py to Unix format... dos2unix: Skipping symbolic link ./nc_files/remap_lib/python-stdglue/python/stdglue.py. dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/toplevel.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/remap.py to Unix format... dos2unix: converting file ./nc_files/involute.py to Unix format... dos2unix: converting file ./nc_files/holecircle.py to Unix format... dos2unix: converting file ./nc_files/flowsnake.py to Unix format... dos2unix: converting file ./nc_files/filtertest.py to Unix format... dos2unix: converting file ./nc_files/filtertest-gui.py to Unix format... dos2unix: converting file ./lib/python/vismach.py to Unix format... dos2unix: converting file ./lib/python/vcpparse.py to Unix format... dos2unix: converting file ./lib/python/tooldb.py to Unix format... dos2unix: converting file ./lib/python/rs274/options.py to Unix format... dos2unix: converting file ./lib/python/rs274/interpret.py to Unix format... dos2unix: converting file ./lib/python/rs274/glcanon.py to Unix format... dos2unix: converting file ./lib/python/rs274/author.py to Unix format... dos2unix: converting file ./lib/python/rs274/__init__.py to Unix format... dos2unix: converting file ./lib/python/rs274/OpenGLTk.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_baseclass.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/web_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/virtualkeyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/versa_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/touchEntry.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tool_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tab_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/system_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/stylesheeteditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_stacked.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_slider.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_led.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/simple_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/screen_options.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/runFromLine_dialog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_progress.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_gauge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/richtext_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/radio_axis_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/qtvcp_icons.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_subprog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_routines.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/overlay_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/origin_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/offset_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/nurbs_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_touchy.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_history.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/led_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/joypad.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/jog_increments.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/image_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_selectionbox.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_output.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_input.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/geditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_graphics.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/file_manager.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/fake_status.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/entry_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialog_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialogMixin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/detach_tabs.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/container_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/camview_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/calculator.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/basic_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/axis_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/adjustment_bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button_round.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qtvcp_handler.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_tstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_pstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makepins.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makegui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_istat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_action.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/widgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/web_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/virtualkeyboard_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/versa_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/toolbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/tab_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_slider_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/simplewidgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/screenoptions_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_progress_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_gauge_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/qtvcp_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/overlay_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/nurbs_editor_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/joypad_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/jogincrements_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/hal_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/graphics_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/dialog_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/detach_tabs_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/container_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/camview_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/basic_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/actionbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/logger.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/virtual_keyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/writer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/wordcount.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/table.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/find.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/datetime.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/touchoff_subprogram.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/toolbar_actions.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/sys_notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/ripper/gcode_ripper.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/updater.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/tooltips.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/set_offsets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conversational.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_triangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_star.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_slot.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_settings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_sector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_polygon.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_gusset.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_bolt.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_block.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/scara.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/qt_vismach.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/primitives.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/millturn.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/mill_xyz.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_pdf/PDFViewer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/preferences.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/message.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/mdi_text.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/keybindings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcodes.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/facing.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/colored_formatter.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/aux_program_loader.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/auto_height/auto_height.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/audio_player.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/core.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/pyvcp_widgets.py to Unix format... dos2unix: converting file ./lib/python/pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/pyhal.py to Unix format... dos2unix: converting file ./lib/python/propertywindow.py to Unix format... dos2unix: converting file ./lib/python/popupkeyboard.py to Unix format... dos2unix: converting file ./lib/python/plasmac/triangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/star.py to Unix format... dos2unix: converting file ./lib/python/plasmac/slot.py to Unix format... dos2unix: converting file ./lib/python/plasmac/sector.py to Unix format... dos2unix: converting file ./lib/python/plasmac/run_from_line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/rectangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/polygon.py to Unix format... dos2unix: converting file ./lib/python/plasmac/line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/gusset.py to Unix format... dos2unix: converting file ./lib/python/plasmac/ellipse.py to Unix format... dos2unix: converting file ./lib/python/plasmac/circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/bolt_circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/block.py to Unix format... dos2unix: converting file ./lib/python/multifilebuilder.py to Unix format... dos2unix: converting file ./lib/python/linuxcnc_util.py to Unix format... dos2unix: converting file ./lib/python/linux_event.py to Unix format... dos2unix: converting file ./lib/python/hershey.py to Unix format... dos2unix: converting file ./lib/python/hal_glib.py to Unix format... dos2unix: converting file ./lib/python/hal.py to Unix format... dos2unix: converting file ./lib/python/gremlin_view.py to Unix format... dos2unix: converting file ./lib/python/glnav.py to Unix format... dos2unix: converting file ./lib/python/gladevcp_makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/xembed.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/tooledit_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/status_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/state_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/speedcontrol.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/persistence.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/overridewidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetpage_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/led.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/jogwheel.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/iconview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_widgets.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_sourceview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pythonplugin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_meter.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_mdihistory.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_lightbutton.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin_plus.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_graph.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_filechooser.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_dial.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_bar.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_actions.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gtk_action.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gladebuilder.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/drowidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/core.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/combi_dro.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/calculatorwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/bwidget.py to Unix format... dos2unix: converting file ./lib/python/bitfile.py to Unix format... dos2unix: converting file ./docs/src/mkpre.py to Unix format... dos2unix: converting file ./docs/src/links_db_gen.py to Unix format... dos2unix: converting file ./docs/src/links.py to Unix format... dos2unix: converting file ./docs/src/gui/panelui_handler.py to Unix format... dos2unix: converting file ./docs/src/gen_complist.py to Unix format... dos2unix: converting file ./docs/src/checklinks.py to Unix format... dos2unix: converting file ./debian/tests/linuxcnc-test-ui.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/zlevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/woodpecker_/woodpecker_handler.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/numstr.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/compensate.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/touchy/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/qtplasmac/custom_filter.py to Unix format... dos2unix: converting file ./configs/sim/hitcounter.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/signals.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/plasma.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/lathe_configs/lathehandler.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/blockdelete.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/util.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/panelui-demo/panelui_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/plugins.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/embedding.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/fullscreen.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/axis_resize.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/remap.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/axis/gladevcp/test_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/probe.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/meter_scale.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_ran.py. dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_nonran.py. dos2unix: converting file ./configs/sim/axis/db_demo/db.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/functionhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler_persistent.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/simple-callback/simplecallback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/complex/complex.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/colored-label/coloredlabel.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/class-callback/class_callback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/spinbutton.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/sourceview.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/radio.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox_manual_list.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/animated-backdrop/cairodraw.py to Unix format... + sed -i 's/GROUP="plugdev"/GROUP="uucp"/g' debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.15022 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd linuxcnc-2.9.2 + pushd src ~/RPM/BUILD/linuxcnc-2.9.2/src ~/RPM/BUILD/linuxcnc-2.9.2 + ./autogen.sh + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CFLAGS + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CXXFLAGS + FFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FFLAGS + FCFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FCFLAGS + '[' -n '' ']' ++ printf %s '-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' ++ sed -r 's/(^|[[:space:]]+)-[^m][^[:space:]]*//g' + ASFLAGS=' -march=i586 -mtune=generic' + export ASFLAGS + export lt_cv_deplibs_check_method=pass_all + lt_cv_deplibs_check_method=pass_all + xargs -ri find '{}' -type f '(' -name config.sub -or -name config.guess ')' -printf '%h/\n' + xargs -ri dirname -- '{}' + xargs -rn1 install -pm755 -- /usr/share/gnu-config/config.sub /usr/share/gnu-config/config.guess + sort -u + readlink -e -- ./configure + configure_runstatedir_flags= + grep -qF runstatedir=DIR ./configure + configure_runstatedir_flags=--runstatedir=/var/run + ./configure --build=i586-alt-linux --host=i586-alt-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var/lib --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --disable-silent-rules --runstatedir=/var/run --without-included-gettext --enable-non-distributable=yes --with-realtime=uspace configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext checking for i586-alt-linux-c++... no checking for i586-alt-linux-clang++... no checking for c++... c++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether c++ supports C++17 features with -std=gnu++17... yes checking build toplevel... /usr/src/RPM/BUILD/linuxcnc-2.9.2 checking installation prefix... /usr checking for grep... /usr/bin/grep checking for egrep... /usr/bin/egrep checking for pkg-config... /usr/bin/pkg-config checking for i586-alt-linux-gcc... i586-alt-linux-gcc checking whether the compiler supports GNU C... yes checking whether i586-alt-linux-gcc accepts -g... yes checking for i586-alt-linux-gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for rpc/rpc.h... no checking for get_myaddress in -ltirpc... yes checking for rpc/rpc.h... yes checking for rtai-config... none checking for xeno-config... none checking for realtime API(s) to use... uspace checking whether to enable userspace PCI access... yes checking for libudev... yes - version 254 checking for cc version... not specified checking for i586-alt-linux-gcc... (cached) i586-alt-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i586-alt-linux-gcc accepts -g... (cached) yes checking for i586-alt-linux-gcc option to enable C11 features... (cached) none needed checking how to run the C preprocessor... i586-alt-linux-gcc -E checking for usability of linux/hidraw.h... yes checking for usability of rpc/rpc.h... yes checking for libmodbus3... yes - version 3.1.10 checking for libusb-1.0... yes checking for libgpiod... checking for main in -lgpiod... no configure: WARNING: Could not find libgpiod, not building hal_gpio checking for module installation directory... /usr/lib/linuxcnc/modules checking for glib... yes - 2.80.2 checking for GTK 3.22.4 or above... yes - 3.24.41 checking for GTK 2.4.0 or above... yes - 2.24.33 checking for libgnomeprintui-2.2... no -- printing from classicladder will not be possible checking whether make sets $(MAKE)... yes checking for i586-alt-linux-ranlib... no checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for install... /usr/bin/ginstall -c checking for sed... /usr/bin/sed checking for ps... /usr/bin/ps checking for kill... /usr/bin/kill checking for whoami... /usr/bin/whoami checking for awk... /usr/bin/awk checking for pidof... /usr/bin/pidof checking for ipcs... /usr/bin/ipcs checking for fuser... /usr/bin/fuser checking for yapps... no checking for yapps2... /usr/bin/yapps2 checking for mandb... /usr/bin/mandb checking for intltool-extract... /usr/bin/intltool-extract checking for yapps... (cached) /usr/bin/yapps2 checking build system type... i586-alt-linux-gnu checking host system type... i586-alt-linux-gnu checking for boostlib >= (102000)... yes checking for python build information... checking for python3.12... python3.12 checking for main in -lpython3.12... yes results of the Python check: Binary: python3.12 Library: python3.12 Include Dir: /usr/include/python3.12 checking for python3.12... /usr/bin/python3.12 checking for python... (cached) /usr/bin/python3.12 checking for a version of Python >= '2.1.0'... yes checking for the sysconfig Python package... yes checking for Python include path... -I/usr/include/python3.12 checking for Python library path... -L/usr/lib -lpython3.12 checking for Python site-packages path... /usr/lib/python3/site-packages checking for Python platform specific site-packages path... checking python extra libraries... -ldl -lm checking python extra linking flags... -Xlinker -export-dynamic checking consistency of all components of python development environment... yes checking whether the Boost::Python library is available... yes checking whether boost_python is the correct library... no checking whether boost_python312-mt is the correct library... yes checking whether to build documentation... no checking for sys/io.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for semtimedop... yes checking for optreset... no checking for library containing dlopen... none required checking for library containing clock_nanosleep... none required checking for tcl... find: '/usr/lib/chkpwd': Permission denied /usr/lib/tclConfig.sh found checking for tk... /usr/lib/tkConfig.sh found checking whether to check for runtime dependencies... yes checking for BWidget using /usr/bin/tclsh8.6... found checking for BLT using /usr/bin/tclsh8.6... not found checking for tclX using /usr/bin/tclsh8.6... found checking for python pango module... found checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X11/extensions/Xinerama.h... yes checking for XineramaQueryExtension in -lXinerama... yes checking for readline/readline.h... yes checking for readline/history.h... yes Trying readline without -ltermcap checking for readline in -lreadline... yes Trying readline with -ltermcap checking for readline in -lreadline... no Readline does not require -ltermcap checking whether readline license is compatible with GPL-2... no configure: WARNING: The LinuxCNC binary you are building may not be distributable due to a license incompatibility with LinuxCNC (some portions GPL-2 only) and Readline version 6 and greater (GPL-3 or later). configure: WARNING: User requested to enable non-distributable builds. Continuing. checking for locale.h... yes checking for setlocale... yes checking for libintl.h... yes checking for gettext in -lintl... no checking for xgettext... /usr/bin/xgettext checking for msgfmt... /usr/bin/msgfmt checking python version... OK checking match between tk and Tkinter versions... 8.6 checking for site-package location... /usr/lib/python3/site-packages checking for working GLU quadrics... yes checking for Xmu headers... checking for X11/Xmu/Xmu.h... yes configure: creating ./config.status config.status: creating ../scripts/rtapi.conf config.status: creating ../scripts/linuxcnc config.status: creating ../scripts/linuxcnc_info config.status: creating ../scripts/halrun config.status: creating ../scripts/rip-environment config.status: creating ../scripts/haltcl config.status: creating ../scripts/halcmd_twopass config.status: creating ../scripts/realtime config.status: creating ../scripts/runtests config.status: creating ../scripts/linuxcnc_var config.status: creating ../scripts/linuxcnc-checklink config.status: creating Makefile.inc config.status: creating Makefile.modinc config.status: creating ../tcl/linuxcnc.tcl config.status: creating ../lib/python/nf.py config.status: creating ../scripts/linuxcncmkdesktop config.status: creating ../share/applications/linuxcnc-latency.desktop config.status: creating ../share/applications/linuxcnc-latency-histogram.desktop config.status: creating ../share/applications/linuxcnc-pncconf.desktop config.status: creating ../share/applications/linuxcnc-stepconf.desktop config.status: creating ../share/applications/linuxcnc.desktop config.status: creating ../share/desktop-directories/linuxcnc-cnc.directory config.status: creating ../share/desktop-directories/linuxcnc-ref.directory config.status: creating ../share/desktop-directories/linuxcnc-doc.directory config.status: creating ../share/menus/CNC.menu config.status: creating config.h configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext ###################################################################### # LinuxCNC - Enhanced Machine Controller # ###################################################################### # # # LinuxCNC is a software system for computer control of machine # # tools such as milling machines. LinuxCNC is released under the # # GPL. Check out http://www.linuxcnc.org/ for more details. # # # # # # It seems that ./configure completed successfully. # # This means that RT is properly installed # # If things don't work check config.log for errors & warnings # # # # warning: If you already have an installed linuxcnc, this will # # replace an existing installation. If you have installed # # a linuxcnc package, this will damage the package. # # hint: To test a self-built version of linuxcnc without damaging # # the package version, don't specify a --prefix # # # # Next compile by typing # # make # # then install it by typing # # sudo make install # # # # To run the software type # # linuxcnc # # # ###################################################################### + make -j8 make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/115 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating abs.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating abs_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating and2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating anglejog.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating axistest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bin2gray.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating biquad.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bitslice.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bitwise.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating bldc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating blend.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating carousel.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating charge_pump.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarke2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarke3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating clarkeinv.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating comp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating constant.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' converting conv for conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating corexy_by_hal.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating dbounce.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ddt.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating deadzone.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating demux.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating differential.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating div2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating edge.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating eoffset_per_angle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating estop_latch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating feedcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating filter_kalman.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating flipflop.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gantry.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gearchange.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating gray2bin.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating histobins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating homecomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating hypot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ilowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating integ.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating invert.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating joyhandle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating knob2float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating latencybins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit1.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating limit_axis.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lincurve.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating logic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating lut5.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating maj3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating match8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating max31855.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_pktgyro_test.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating message.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating millturn.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating minmax.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating moveoff.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mult2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating multiclick.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating multiswitch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux16.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux4.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mux8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating near.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating not.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating offset.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ohmic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating oneshot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating or2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating orient.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating plasmac.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sample_hold.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating scale.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating scaled_s32_sums.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating select8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_axis_hardware.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_home_switch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_matrix_kb.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_parport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sim_spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating simple_tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sphereprobe.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating spindle_monitor.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating steptest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating sum2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating thc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating thcud.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating threadtest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating time.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating timedelay.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating timedelta.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tof.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating toggle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating toggle2nist.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating ton.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tristate_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating tristate_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating updown.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating userkins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating wcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xhc_hb04_util.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xor2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating xyzab_tdr_kins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating serport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_7i65.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating mesa_uart.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_bit_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_float_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_float_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_s32_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating conv_u32_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/237 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying test input hal/components/bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' sed hal/drivers/mesa_uart.comp -e "1 s/mesa_uart/mesa_uart_test/" > ../tests/halcompile/serial-out-of-tree/mesa_uart_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' sed ../docs/src/hal/rand.comp -e "1 s/rand/rand_test/" > ../tests/halcompile/userspace/rand_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp ../scripts/rtapi.conf ../tests/uspace/spawnv-root/rtapi.conf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/posemath.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/rcs/rcs_exit.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_shm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_timer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/sem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/rcs/rcs_print.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/shm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/_sem.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/os_intf/timer.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/phantom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/locmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/memsem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/physmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/sendn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/recvn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/shmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_aup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_pm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_dup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_in.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_cfg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/inifile/inivar.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_up.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/tcp_opts.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_xup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/cmd_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_oi.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cms_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/cmsdiag.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/inifile/inifile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nmldiag.cc libnml/nml/nmldiag.cc: In function 'int nml_print_diag_list()': libnml/nml/nmldiag.cc:134:26: warning: the address of 'CMS::BufferName' will never be NULL [-Waddress] 134 | if (NULL != nml->cms->BufferName) { | ^ In file included from libnml/cms/cmsdiag.hh:18, from libnml/nml/nmldiag.hh:18, from libnml/nml/nmldiag.cc:16: libnml/cms/cms.hh:354:10: note: 'CMS::BufferName' declared here 354 | char BufferName[LINELEN]; | ^~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nmlmsg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/buffer/tcpmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/stat_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/cms/tcp_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/linklist/linklist.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_ulapi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_string.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' :1: SyntaxWarning: invalid escape sequence '\.' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' :1: SyntaxWarning: invalid escape sequence '\[' :1: SyntaxWarning: invalid escape sequence '\]' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in config.status: creating ../docs/man/man1/linuxcnc.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/rtapi_pci.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling libnml/nml/nml_mod.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_parport.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/emccalib.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/emccalib.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml" Note: Writing emccalib.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/emccalib.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/halstreamer.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/halstreamer.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml" Note: Writing halstreamer.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/halstreamer.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/mqtt-publisher.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/mqtt-publisher.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml" Note: Writing mqtt-publisher.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/mqtt-publisher.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/hy_gt_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/hy_gt_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml" Note: Writing hy_gt_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/hy_gt_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/streamer_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/sendkeys.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/sendkeys.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml" Note: Writing sendkeys.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/sendkeys.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/sampler_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/svd-ps_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/svd-ps_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml" Note: Writing svd-ps_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/svd-ps_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/enum.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man9/enum.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/enum.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml" Note: Writing enum.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/enum.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/components/panelui.c hal/components/panelui.c: In function 'main': hal/components/panelui.c:211:5: warning: 'Py_SetProgramName' is deprecated [-Wdeprecated-declarations] 211 | Py_SetProgramName(wname); | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from hal/components/panelui.c:73: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man3/hm2_pktuart.3` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man3', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man3/hm2_pktuart.3.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml" Note: Writing hm2_pktuart.3 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man3/hm2_pktuart.3.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/streamer.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man9/streamer.9.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/streamer.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml" Note: Writing streamer.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man9/streamer.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_init.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/xhc-whb04b-6.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/docbook45.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/source/source-highlight-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/graphviz/graphviz-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/filters/code/code-filter.conf asciidoc: reading: /usr/lib/python3/site-packages/asciidoc/resources/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/xhc-whb04b-6.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/usr/lib/python3/site-packages/asciidoc/resources/stylesheets'] a2x: executing: asciidoc [('--doctype', 'manpage'), ('--attribute', 'mansource=LinuxCNC'), ('--attribute', 'manmanual=LinuxCNC Documentation'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=manpage'), ('--out-file', '/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml')] a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/usr/lib/python3/site-packages/asciidoc/resources/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml" Note: Writing xhc-whb04b-6.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.2/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.2/docs/man/man1/xhc-whb04b-6.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_modbus.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/gs2_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/mb2hal/mb2hal_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/hy_gt_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/svd-ps_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/shuttle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/sendkeys.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/vfs11_vfd/vfs11_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/config.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling rtapi/uspace_rtapi_app.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/classicladder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/drawing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/classicladder_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/config_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/emc_mods.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/drawing_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-hb04.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/editproperties_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/edit_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files_project.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/files_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/protocol_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/protocol_modbus_slave.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/serial_linux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/socket_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/socket_server.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/vars_names.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halsh.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_main.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/manager_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_completion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/symbols_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/spy_vars_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halrmt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_trig.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/miscgtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/meter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/halcmd_commands.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script elbpcom Copying python script elbpcom make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script modcompile Copying python script modcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying Modbus template mesa_modbus.c.tmpl make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_horiz.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_vert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/vfdb_vfd/vfdb_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/huanyang-vfd/hy_comm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/huanyang-vfd/hy_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_disp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/utils/scope_files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/pendant-types.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/main.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/usb.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/xhc-whb04b6.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/hal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcargs.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/emcops.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/modal_state.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/canon_position.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/shcom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/xhc-whb04b-6/pendant.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/emcIniFile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/nml_intf/interpl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inijoint.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/iniaxis.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/sockets.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inispindle.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/initraj.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emclcd.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_mmap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/ini/inihal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/emcmotglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_common.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/tooldata/tooldata_db.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/halui.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emcsvr.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcrsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emccanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/schedrmt.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/emcsched.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/backtrace.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emctaskmain.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_arc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/usrmotintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_base.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_check.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_array.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/emctask.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_find.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_queue.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_inverse.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_cycles.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_execute.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_internal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_convert.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/nurbs_additional_functions.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_write.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_read.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_g7x.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_setup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_o_word.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyparamclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_namedparams.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_remap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_python.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/task/taskmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interp_inspection.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/canonmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyemctypes.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/rs274ngc_pre.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/ugenserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyblock.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/iotask/ioControl.cc emc/iotask/ioControl.cc: In function 'int main(int, char**)': emc/iotask/ioControl.cc:694:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 694 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:695:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 695 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:696:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 696 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/iotask/ioControl_v2.cc emc/iotask/ioControl_v2.cc: In function 'int main(int, char**)': emc/iotask/ioControl_v2.cc:791:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 791 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:792:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 792 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:793:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 793 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/canterp/canterp.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/pythonplugin/python_plugin.cc emc/pythonplugin/python_plugin.cc: In constructor 'PythonPlugin::PythonPlugin(_inittab*)': emc/pythonplugin/python_plugin.cc:298:22: warning: 'void Py_SetProgramName(const wchar_t*)' is deprecated [-Wdeprecated-declarations] 298 | Py_SetProgramName(program); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ In file included from /usr/include/python3.12/Python.h:94, from /usr/include/boost/python/detail/wrap_python.hpp:178, from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/ssize_t.hpp:9, from /usr/include/boost/python/object.hpp:8, from emc/pythonplugin/python_plugin.hh:25, from emc/pythonplugin/python_plugin.cc:19: /usr/include/python3.12/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ emc/pythonplugin/python_plugin.cc:326:3: warning: 'Py_UnbufferedStdioFlag' is deprecated [-Wdeprecated-declarations] 326 | Py_UnbufferedStdioFlag = 1; | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.12/Python.h:48: /usr/include/python3.12/cpython/pydebug.h:20:37: note: declared here 20 | Py_DEPRECATED(3.12) PyAPI_DATA(int) Py_UnbufferedStdioFlag; | ^~~~~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion-logger/motion-logger.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyarrays.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/cs/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling module_helper/module_helper.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/da/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/de/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/es/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/fi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/saicanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/hu/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/fr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ja/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/it/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/nb/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/pl/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/driver.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/sai/dummyemcstat.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ro/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/ru/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sk/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/sv/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/vi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/cs/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/interpmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/da/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/de/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/es/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/fr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/hu/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/it/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/nb/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/pl/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/sk/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/vi/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/sr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/linuxcnc.h ../include/linuxcnc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/emcIniFile.hh ../include/emcIniFile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/iniaxis.hh ../include/iniaxis.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inijoint.hh ../include/inijoint.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized gmoccapy message catalog ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inispindle.hh ../include/inispindle.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/initraj.hh ../include/initraj.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/ini/inihal.hh ../include/inihal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/cubic.h ../include/cubic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/kinematics.h ../include/kinematics.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/switchkins.h ../include/switchkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/genhexkins.h ../include/genhexkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/genserkins.h ../include/genserkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/pentakins.h ../include/pentakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/kinematics/pumakins.h ../include/pumakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tc.h ../include/tc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tc_types.h ../include/tc_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tcq.h ../include/tcq.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tp.h ../include/tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/tp_types.h ../include/tp_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/spherical_arc.h ../include/spherical_arc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/tp/blendmath.h ../include/blendmath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/motion.h ../include/motion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/emcmotcfg.h ../include/emcmotcfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/homing.h ../include/homing.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/simple_tp.h ../include/simple_tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/state_tag.h ../include/state_tag.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/usrmotintf.h ../include/usrmotintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/motion/axis.h ../include/axis.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/canon.hh ../include/canon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/canon_position.hh ../include/canon_position.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emctool.h ../include/emctool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emc.hh ../include/emc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emc_nml.hh ../include/emc_nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emccfg.h ../include/emccfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcglb.h ../include/emcglb.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcpos.h ../include/emcpos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/emcpose.h ../include/emcpose.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/interp_return.hh ../include/interp_return.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/interpl.hh ../include/interpl.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/motion_types.h ../include/motion_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/nml_intf/debugflags.h ../include/debugflags.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_internal.hh ../include/interp_internal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_fwd.hh ../include/interp_fwd.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/interp_base.hh ../include/interp_base.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/modal_state.hh ../include/modal_state.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/rs274ngc/rs274ngc.hh ../include/rs274ngc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp emc/sai/saicanon.hh ../include/saicanon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/hal.h ../include/hal.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/hal_parport.h ../include/hal_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp hal/drivers/mesa-hostmot2/hostmot2-serial.h ../include/hostmot2-serial.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/locmem.hh ../include/locmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/memsem.hh ../include/memsem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/phantom.hh ../include/phantom.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/physmem.hh ../include/physmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/recvn.h ../include/recvn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/rem_msg.hh ../include/rem_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/sendn.h ../include/sendn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/shmem.hh ../include/shmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/buffer/tcpmem.hh ../include/tcpmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms.hh ../include/cms.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_aup.hh ../include/cms_aup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_cfg.hh ../include/cms_cfg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_dup.hh ../include/cms_dup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_srv.hh ../include/cms_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_up.hh ../include/cms_up.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_user.hh ../include/cms_user.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cmsdiag.hh ../include/cmsdiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/cms_xup.hh ../include/cms_xup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/tcp_opts.hh ../include/tcp_opts.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/cms/tcp_srv.hh ../include/tcp_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/inifile/inifile.h ../include/inifile.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/inifile/inifile.hh ../include/inifile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/linklist/linklist.hh ../include/linklist.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/cmd_msg.hh ../include/cmd_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml.hh ../include/nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_mod.hh ../include/nml_mod.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_oi.hh ../include/nml_oi.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_srv.hh ../include/nml_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nml_type.hh ../include/nml_type.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nmldiag.hh ../include/nmldiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/nmlmsg.hh ../include/nmlmsg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/nml/stat_msg.hh ../include/stat_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_sem.h ../include/_sem.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/sem.hh ../include/sem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_shm.h ../include/_shm.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/shm.hh ../include/shm.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/_timer.h ../include/_timer.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/posemath.h ../include/posemath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/os_intf/timer.hh ../include/timer.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/gotypes.h ../include/gotypes.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/gomath.h ../include/gomath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/posemath/sincos.h ../include/sincos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs.hh ../include/rcs.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs_exit.hh ../include/rcs_exit.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcs_print.hh ../include/rcs_print.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp libnml/rcs/rcsversion.h ../include/rcsversion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi.h ../include/rtapi.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_app.h ../include/rtapi_app.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_atomic.h ../include/rtapi_atomic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_bitops.h ../include/rtapi_bitops.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_byteorder.h ../include/rtapi_byteorder.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_bool.h ../include/rtapi_bool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_firmware.h ../include/rtapi_firmware.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_gfp.h ../include/rtapi_gfp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_device.h ../include/rtapi_device.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_io.h ../include/rtapi_io.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_limits.h ../include/rtapi_limits.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_list.h ../include/rtapi_list.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math.h ../include/rtapi_math.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math_i386.h ../include/rtapi_math_i386.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_math64.h ../include/rtapi_math64.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_mutex.h ../include/rtapi_mutex.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_parport.h ../include/rtapi_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_pci.h ../include/rtapi_pci.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_slab.h ../include/rtapi_slab.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_stdint.h ../include/rtapi_stdint.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_ctype.h ../include/rtapi_ctype.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_errno.h ../include/rtapi_errno.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_string.h ../include/rtapi_string.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' cp rtapi/rtapi_vsnprintf.h ../include/rtapi_vsnprintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/cs.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/da.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/de.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/fi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/es.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/fr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ja.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/hu.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/it.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/pl.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/nb.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/pt_BR.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sk.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ru.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/ro.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/sv.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/vi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_HK.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_CN.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling localized message catalog objects/zh_TW.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pyvcp Copying python script pyvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_input Copying python script hal_input make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script scorbot-er-3 Copying python script scorbot-er-3 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gladevcp Copying python script gladevcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mitsub_vfd Copying python script mitsub_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pmx485 Copying python script pmx485 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script sim-torch Copying python script sim-torch make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script z_level_compensation Copying python script z_level_compensation make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pumagui Copying python script pumagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mqtt-publisher Copying python script mqtt-publisher make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script puma560gui Copying python script puma560gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script lineardelta Copying python script lineardelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script scaragui Copying python script scaragui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hexagui Copying python script hexagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script 5axisgui Copying python script 5axisgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script max5gui Copying python script max5gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script maho600gui Copying python script maho600gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hbmgui Copying python script hbmgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script rotarydelta Copying python script rotarydelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script melfagui Copying python script melfagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzac-trt-gui Copying python script xyzac-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/pyinterp1.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script millturngui Copying python script millturngui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzbc-trt-gui Copying python script xyzbc-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script xyzab-tdr-gui Copying python script xyzab-tdr-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script axis-remote Copying python script axis-remote make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script linuxcnctop Copying python script linuxcnctop make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_manualtoolchange Copying python script hal_manualtoolchange make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi Copying python script mdi make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script axis Copying python script axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script image-to-gcode emc/usr_intf/axis/scripts/image-to-gcode.py:550: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {![regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" emc/usr_intf/axis/scripts/image-to-gcode.py:552: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {![regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" Copying python script image-to-gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script lintini Copying python script lintini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script debuglevel Copying python script debuglevel make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script teach-in Copying python script teach-in make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script tracking-test Copying python script tracking-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script touchy Copying python script touchy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script hal_interface.py Copying python script hal_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script filechooser.py Copying python script filechooser.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file touchy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/axis/extensions/_toglmodule.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script listing.py Copying python script listing.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying linuxcnc-wizard.gif make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script stepconf emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/stepconf/stepconf.py:446: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script stepconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file spindle.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file halui_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisx.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisz.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisu.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisv.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script import_mach.py Copying python script import_mach.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file axisa.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pncconf Copying python script pncconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script tests.py Copying python script tests.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script private_data.py Copying python script private_data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/halmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script data.py emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ emc/usr_intf/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ Copying python script data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file mesa0.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file help.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file mesa1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file external.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file screen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file vcp.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file x_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file x_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file y_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file y_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file z_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file z_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file a_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file a_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file s_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file realtime.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file dialogs.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/usr_intf/axis/extensions/emcmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gremlin.py Copying python script gremlin.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gremlin Copying python script gremlin make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qt5_graphics.py Copying python script qt5_graphics.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gscreen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gscreen2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gscreen Copying python script gscreen make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script keybindings.py Copying python script keybindings.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pyui Copying python script pyui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script __init__.py Copying python script __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying INI script panelui_spec.ini cp emc/usr_intf/pyui/panelui_spec.ini ../lib/python/pyui/panelui_spec.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script master.py Copying python script master.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying INI script _panelui.ini cp emc/usr_intf/pyui/_panelui.ini ../lib/python/pyui/_panelui.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script commands.py Copying python script commands.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script panelui_validate.py Copying python script panelui_validate.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtvcp Copying python script qtvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script dialogs.py Copying python script dialogs.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script gmoccapy Copying python script gmoccapy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script getiniinfo.py Copying python script getiniinfo.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script notification.py Copying python script notification.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script player.py Copying python script player.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Copying glade file gmoccapy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script icon_theme_helper.py Copying python script icon_theme_helper.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-materials emc/usr_intf/qtplasmac/qtplasmac-materials.py:288: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Tool\ number'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:294: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Kerf\ width'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:298: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:302: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pierce\ delay'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:305: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ height'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:309: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Feed\ rate'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:313: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ current') or (line.startswith('Preset\ current') and self.materialCutA == 'CUT_AMPS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:316: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ voltage') or (line.startswith('Preset\ volts') and self.materialCutV == 'CUT_VOLTS = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:319: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Pause\ at\ end\ of\ cut'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:322: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Gas\ pressure') or (line.startswith('Preset\ Air\ Pressure') and self.materialGasP == 'GAS_PRESSURE = 0'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): emc/usr_intf/qtplasmac/qtplasmac-materials.py:325: SyntaxWarning: invalid escape sequence '\ ' elif line.startswith('Cut\ mode') or (line.startswith('Preset\ mode') and self.materialCutM == 'CUT_MODE = 1'): Copying python script qtplasmac-materials make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-plasmac2qt Copying python script qtplasmac-plasmac2qt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac-cfg2prefs Copying python script qtplasmac-cfg2prefs make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script qtplasmac_gcode Copying python script qtplasmac_gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script M190 Copying python script M190 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script pmx485-test Copying python script pmx485-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script mdro Copying python script mdro make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script update_ini emc/ini/update_ini.py:17: SyntaxWarning: invalid escape sequence '\s' regex = "^\s*\[%s\](.+?)(?:^\s*\[|\Z)" % block emc/ini/update_ini.py:181: SyntaxWarning: invalid escape sequence '\s' all_sections = re.findall("^\s*\[(.+)\]", inistring, re.MULTILINE) emc/ini/update_ini.py:193: SyntaxWarning: invalid escape sequence '\[' section = re.match("(.*?)^\[", inistring, re.DOTALL | re.MULTILINE) emc/ini/update_ini.py:199: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:218: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[RS274NGC\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:236: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[EMCMOT\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:267: SyntaxWarning: invalid escape sequence '\w' match = re.match('(?:#autoconverted|loadrt) +(\w+kins)', line) emc/ini/update_ini.py:270: SyntaxWarning: invalid escape sequence '\w' match = re.search('coordinates *= *(\w+)', line) emc/ini/update_ini.py:274: SyntaxWarning: invalid escape sequence '\w' match = re.search('kinstype *= *(\w+)', line) emc/ini/update_ini.py:289: SyntaxWarning: invalid escape sequence '\d' match = re.match('setp +gantrykins.joint-(\d) +(\d)', line) emc/ini/update_ini.py:301: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[TRAJ\](.+?)\n\[", inistring, re.DOTALL) emc/ini/update_ini.py:309: SyntaxWarning: invalid escape sequence '\s' mv = re.findall("MAX_VELOCITY[\s=]+(\d*(\.\d+)?)", inistring, re.MULTILINE) emc/ini/update_ini.py:341: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[JOINT_%i\])"%j, inistring, re.MULTILINE): emc/ini/update_ini.py:342: SyntaxWarning: invalid escape sequence '\[' if re.search("^(\[AXIS_%s\])" % "XYZABCUVW"[j], inistring, re.MULTILINE): emc/ini/update_ini.py:388: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % J, inistring, re.DOTALL) emc/ini/update_ini.py:390: SyntaxWarning: invalid escape sequence '\[' section = re.search("\[AXIS_%i\](.+?)(\n\[|$)" % "XYZABCUVW".index(coordinates[J]), inistring, re.DOTALL) emc/ini/update_ini.py:394: SyntaxWarning: invalid escape sequence '\[' if not '\[AXIS_%i\]' % axisnum in subs: emc/ini/update_ini.py:395: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % axisnum : '[JOINT_%i]' % J}) emc/ini/update_ini.py:396: SyntaxWarning: invalid escape sequence '\.' subs2.update({'joint\.%i\.' % axisnum : 'joint.%i.' % J}) emc/ini/update_ini.py:398: SyntaxWarning: invalid escape sequence '\[' subs.update({'\[AXIS_%i\]' % J : '[JOINT_%i]' % J}) emc/ini/update_ini.py:487: SyntaxWarning: invalid escape sequence '\[' 'num_joints=\[TRAJ\]AXES': 'num_joints=[KINS]JOINTS', emc/ini/update_ini.py:498: SyntaxWarning: invalid escape sequence '\s' '^\s*setp\s+(joint\S+)\s+(axis\S+)\s+(\S+)\s*$': Copying python script update_ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/counter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/debounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/enum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/boss_plc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/encoder_ratio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/lcd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/mux_generic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/siggen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/threads.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/supply.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/weighted_sum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/pid.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/sim_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/sampler.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/modmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_speaker.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/components/streamer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/rs274ngc/gcodemodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_pi_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/cpuinfo.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_bb_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/bitfile.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/lineardeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_ppmc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/abs_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/bspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/dpll.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hostmot2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/led.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/inm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/hal_gm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/inmux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/ioport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/raw.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/rcpwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/pktuart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/ssr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling emc/kinematics/rotarydeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/resolver.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/outm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/tram.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/tp_pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/xy2mod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_pci.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i43.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i90.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/setsserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_spi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/module_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/sserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/utils/scope_rt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/trivkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rotatekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/maxkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_rpspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_eth.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/corexykins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/tripodkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/kins_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/lineardeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rosekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/pentakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/rotarydeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/scorbot-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/switchkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/userkfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/xyzac-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/xyzbc-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/scarakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/5axiskins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genhexkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/pumakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/cubic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/kinematics/trtfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/homemod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tpmod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tcq.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/motion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/spherical_arc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/homing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/control.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/motion/command.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Syntax checking python script halcompile Copying python script halcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking liblinuxcnc.a make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' config.status: creating ../scripts/setup_designer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime emc/tp/blendmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnc_module_helper make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module lineardeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/lineardeltakins.so objects/emc/kinematics/lineardeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library liblinuxcncini.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' tooldata: depends: objects/emc/tooldata/tooldata_mmap.o objects/emc/tooldata/tooldata_common.o objects/emc/tooldata/tooldata_db.o tooldata: Linking: libtooldata.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing abs.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing abs_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module _togl.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing and2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing anglejog.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing axistest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bin2gray.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library liblinuxcnchal.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing biquad.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bitwise.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing bldc.comp :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing charge_pump.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing carousel.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing blend.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarke2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarkeinv.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module rotarydeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/rotarydeltakins.so objects/emc/kinematics/rotarydeltakins.o -lboost_python312-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing comp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing clarke3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing constant.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library libposemath.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing corexy_by_hal.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing dbounce.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing deadzone.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing demux.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing div2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ddt.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing differential.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing edge.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing eoffset_per_angle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing estop_latch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing filter_kalman.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing feedcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing flipflop.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gantry.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking rtapi_app make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gearchange.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing gray2bin.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing homecomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing hypot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing histobins.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ilowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing integ.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing invert.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing joyhandle.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing knob2float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing latencybins.comp :1: SyntaxWarning: invalid escape sequence '\(' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit1.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing limit_axis.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing match8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing max31855.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing maj3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing lut5.comp :1: SyntaxWarning: invalid escape sequence '\*' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_pktgyro_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing message.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing millturn.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing minmax.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing moveoff.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mult2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing multiclick.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing multiswitch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux16.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux4.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mux8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing near.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing offset.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing not.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ohmic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing oneshot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing or2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing orient.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sample_hold.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing plasmac.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing scale.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing scaled_s32_sums.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing select8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_home_switch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_axis_hardware.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_matrix_kb.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sim_parport.comp :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing simple_tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sphereprobe.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing spindle_monitor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing steptest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing sum2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thcud.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing threadtest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing timedelay.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tof.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing time.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing timedelta.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing toggle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing toggle2nist.comp :1: SyntaxWarning: invalid escape sequence '\[' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing ton.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tristate_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing tristate_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing updown.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing userkins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing wcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xor2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xhc_hb04_util.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing xyzab_tdr_kins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing serport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_7i65.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing mesa_uart.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/abs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/abs_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/and2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bin2gray.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/axistest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bitslice.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/charge_pump.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/anglejog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bitwise.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/blend.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarke2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/biquad.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarke3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/comp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/clarkeinv.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/constant.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_bit_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_float_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_float_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/carousel.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_s32_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/bldc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/conv_u32_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/corexy_by_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ddt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/dbounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/deadzone.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/demux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/edge.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/differential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/estop_latch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/div2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/feedcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/flipflop.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/filter_kalman.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gantry.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/eoffset_per_angle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gray2bin.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/gearchange.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/homecomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/hypot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/histobins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/integ.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ilowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/invert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/knob2float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/latencybins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit1.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/joyhandle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lincurve.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/logic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit_axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/maj3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/limit3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/lut5.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/message.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/match8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/minmax.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/millturn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mesa_pktgyro_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mult2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/max31855.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/multiclick.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux4.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/multiswitch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux16.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/mux8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/near.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/not.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/moveoff.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/offset.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ohmic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/or2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/orient.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sample_hold.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/scale.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/select8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/scaled_s32_sums.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_home_switch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sphereprobe.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/spindle_monitor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sum2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/thc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/steptest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/sim_axis_hardware.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/timedelay.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/timedelta.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/threadtest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/time.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/thcud.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tof.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/toggle2nist.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/toggle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/ton.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tristate_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/tristate_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/updown.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/userkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xor2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xhc_hb04_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/wcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/xyzab_tdr_kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/serport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/mesa_uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/boss_plc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/drivers/mesa_7i65.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/debounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/encoder_ratio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/enum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/counter.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/stepgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lcd.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pwmgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/threads.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux_generic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/siggen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/supply.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pid.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/watchdog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/modmath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/weighted_sum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/streamer.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sampler.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_ppmc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_speaker.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_gm.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_bb_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_pi_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling realtime objects/hal/components/plasmac.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hostmot2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_pci.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_7i43.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/setsserial.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_7i90.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_eth.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_spi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/classicladder_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hm2_rpspi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hal_lib.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scope_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/maxkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/trivkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rotatekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/corexykins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tripodkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lineardeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pentakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rosekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/rotarydeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scorbot-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/genhexkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/genserkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scarakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzbc-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzac-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/pumakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf liblinuxcncini.so.0 ../lib/liblinuxcncini.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/5axiskins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libposemath.so.0 ../lib/libposemath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf liblinuxcnchal.so.0 ../lib/liblinuxcnchal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/homemod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/motmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tpmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage abs.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage and2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage anglejog.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage abs_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage biquad.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage axistest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bin2gray.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bitslice.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bitwise.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking inivar make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage blend.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarke2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage bldc.9 :1: SyntaxWarning: invalid escape sequence '\*' :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage carousel.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage charge_pump.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarke3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage clarkeinv.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage comp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage constant.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_bit_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_float_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_float_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_s32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage conv_u32_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage corexy_by_hal.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ddt.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage dbounce.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage deadzone.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage demux.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage div2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage edge.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage eoffset_per_angle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage differential.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage estop_latch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage filter_kalman.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage feedcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage flipflop.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gearchange.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gantry.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage gray2bin.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage homecomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage histobins.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage hypot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage integ.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ilowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage invert.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage joyhandle.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage knob2float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage latencybins.9 :1: SyntaxWarning: invalid escape sequence '\(' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit_axis.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage limit1.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lincurve.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage logic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage lut5.9 :1: SyntaxWarning: invalid escape sequence '\*' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage maj3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage match8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_pktgyro_test.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage max31855.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage message.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage millturn.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage minmax.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage moveoff.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mult2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage multiswitch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage multiclick.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux16.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux4.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mux8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage near.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage not.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage offset.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ohmic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage oneshot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage or2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage orient.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sample_hold.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage scaled_s32_sums.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage scale.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage select8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage plasmac.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_axis_hardware.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_home_switch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_matrix_kb.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage simple_tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_parport.9 :1: SyntaxWarning: invalid escape sequence '\-' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sim_spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sphereprobe.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage spindle_monitor.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage steptest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage sum2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thcud.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage threadtest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage time.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage timedelay.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage timedelta.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tof.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage toggle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage toggle2nist.9 :1: SyntaxWarning: invalid escape sequence '\[' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage ton.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tristate_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tristate_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage updown.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage userkins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xhc_hb04_util.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage wcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xor2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage xyzab_tdr_kins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage serport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_7i65.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage thermistor.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage mesa_uart.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Making halcompile manpage tpcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halstreamer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking panelui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hy_gt_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halsampler make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking shuttle make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking svd-ps_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking gs2_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing thermistor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking sendkeys make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking xhc-hb04 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking vfs11_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking mb2hal make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halmeter make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing wj200_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Preprocessing pi500_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking vfdb_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking hy_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libtooldata.so.0 ../lib/libtooldata.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' emc/Submakefile:Linking genserkins make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/abs.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/abs_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/and2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/anglejog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/axistest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bin2gray.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/biquad.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bitslice.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bitwise.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halscope make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module _hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/bldc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/blend.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/carousel.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/charge_pump.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarke2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarke3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/clarkeinv.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/comp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/constant.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_bit_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halcmd hal/utils/../hal_priv.h:135:27: warning: type of 'hal_data' does not match original declaration [-Wlto-type-mismatch] 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:246:16: note: type 'struct hal_data_t' should match type 'struct hal_data_t' 246 | typedef struct hal_data_t { | ^ hal/utils/../hal_priv.h:135:27: note: 'hal_data' was previously declared here 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:135:27: note: code may be misoptimized unless '-fno-strict-aliasing' is used make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking libpyplugin.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,libpyplugin.so.0 -shared -o ../lib/libpyplugin.so.0 objects/emc/pythonplugin/python_plugin.o ../lib/liblinuxcncini.so -lstdc++ -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_float_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_float_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_s32_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/conv_u32_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/corexy_by_hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/dbounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking xhc-whb04b-6 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ddt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/deadzone.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/demux.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/div2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/differential.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/edge.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/feedcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/eoffset_per_angle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/estop_latch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/filter_kalman.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/flipflop.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gantry.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gearchange.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/gray2bin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/histobins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/homecomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ilowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/hypot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/invert.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/integ.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/joyhandle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/knob2float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/latencybins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit1.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/limit_axis.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lincurve.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/logic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/lut5.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/maj3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_pktgyro_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/max31855.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/match8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/message.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/millturn.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/minmax.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mult2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/moveoff.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/multiclick.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/multiswitch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux16.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux4.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/near.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mux8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/not.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking classicladder make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/offset.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/oneshot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/or2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ohmic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/orient.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/plasmac.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scale.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sample_hold.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/scaled_s32_sums.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/select8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_axis_hardware.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_home_switch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sim_spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/simple_tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sphereprobe.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/spindle_monitor.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/steptest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/sum2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/thc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/thcud.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/threadtest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/time.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/timedelay.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/timedelta.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tof.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/toggle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/toggle2nist.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/ton.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tristate_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tristate_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/updown.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/userkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/wcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xhc_hb04_util.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/serport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xor2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/xyzab_tdr_kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_7i65.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libpyplugin.so.0 ../lib/libpyplugin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking ../rtlib/mesa_uart.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling objects/hal/user_comps/thermistor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/wj200_vfd/wj200_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Compiling hal/user_comps/pi500_vfd/pi500_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking thermistor make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking wj200_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking pi500_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Creating shared library libnml.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf libnml.so.0 ../lib/libnml.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcncrsh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking motion-logger make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcncsvr make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking schedrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking io make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking iov2 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking linuxcnclcd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' emc/tooldata/tool_watch.cc: In function 'int main(int, char**)': emc/tooldata/tool_watch.cc:56:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 56 | fprintf(stderr,"%8ld EMC_STAT\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:57:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 57 | fprintf(stderr,"%8ld EMC_IO_STAT\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:58:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 58 | fprintf(stderr,"%8ld EMC_TOOL_STAT\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:59:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 59 | fprintf(stderr,"%8ld EMC_COOLANT_STAT\n",sizeof(EMC_COOLANT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:60:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 60 | fprintf(stderr,"%8ld EMC_AUX_STAT\n",sizeof(EMC_AUX_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:61:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 61 | fprintf(stderr,"%8ld EMC_LUBE_STAT\n",sizeof(EMC_LUBE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:62:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 62 | fprintf(stderr,"%8ld EMC_TASK_STAT\n",sizeof(EMC_TASK_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:63:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 63 | fprintf(stderr,"%8ld EMC_MOTION_STAT\n",sizeof(EMC_MOTION_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:64:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 64 | fprintf(stderr,"%8ld EMC_TRAJ_STAT\n",sizeof(EMC_TRAJ_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:65:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 65 | fprintf(stderr,"%8ld EMC_JOINT_STAT\n",sizeof(EMC_JOINT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:66:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 66 | fprintf(stderr,"%8ld EMC_AXIS_STAT\n",sizeof(EMC_AXIS_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:67:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 67 | fprintf(stderr,"%8ld EMC_SPINDLE_STAT\n",sizeof(EMC_SPINDLE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking librs274.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,librs274.so.0 -shared -o ../lib/librs274.so.0 objects/emc/rs274ngc/interp_arc.o objects/emc/rs274ngc/interp_array.o objects/emc/rs274ngc/interp_base.o objects/emc/rs274ngc/interp_check.o objects/emc/rs274ngc/interp_convert.o objects/emc/rs274ngc/interp_queue.o objects/emc/rs274ngc/interp_cycles.o objects/emc/rs274ngc/interp_execute.o objects/emc/rs274ngc/interp_find.o objects/emc/rs274ngc/interp_internal.o objects/emc/rs274ngc/interp_inverse.o objects/emc/rs274ngc/interp_read.o objects/emc/rs274ngc/interp_write.o objects/emc/rs274ngc/interp_o_word.o objects/emc/rs274ngc/interp_g7x.o objects/emc/rs274ngc/modal_state.o objects/emc/rs274ngc/nurbs_additional_functions.o objects/emc/rs274ngc/interp_namedparams.o objects/emc/rs274ngc/interp_python.o objects/emc/rs274ngc/interp_remap.o objects/emc/rs274ngc/interp_setup.o objects/emc/rs274ngc/canonmodule.o objects/emc/rs274ngc/pyparamclass.o objects/emc/rs274ngc/pyemctypes.o objects/emc/rs274ngc/pyinterp1.o objects/emc/rs274ngc/pyblock.o objects/emc/rs274ngc/pyarrays.o objects/emc/rs274ngc/interpmodule.o objects/emc/rs274ngc/rs274ngc_pre.o objects/emc/rs274ngc/interp_inspection.o ../lib/liblinuxcncini.so ../lib/libpyplugin.so ../lib/liblinuxcnchal.so.0 ../lib/libtooldata.so.0 -lstdc++ -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' ln -sf librs274.so.0 ../lib/librs274.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking canterp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking halui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking python module gcode.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/gcode.so objects/emc/rs274ngc/gcodemodule.o ../lib/librs274.so.0 -lstdc++ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking milltask c++ -std=gnu++17 -o ../bin/milltask objects/emc/motion/emcmotglb.o objects/emc/task/emctask.o objects/emc/task/emccanon.o objects/emc/task/emctaskmain.o objects/emc/motion/usrmotintf.o objects/emc/motion/emcmotutil.o objects/emc/task/taskintf.o objects/emc/motion/dbuf.o objects/emc/motion/stashf.o objects/emc/task/taskmodule.o objects/emc/task/taskclass.o objects/emc/task/backtrace.o ../lib/librs274.so.0 ../lib/liblinuxcnc.a ../lib/libnml.so.0 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/liblinuxcnchal.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -lboost_python312-mt -L/usr/lib -lpython3.12 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Linking rs274 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' + popd ~/RPM/BUILD/linuxcnc-2.9.2 + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.9137 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/linuxcnc-buildroot + : + /bin/rm -rf -- /usr/src/tmp/linuxcnc-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/usr/bin:/bin:/usr/local/bin:/usr/games + cd linuxcnc-2.9.2 + pushd src ~/RPM/BUILD/linuxcnc-2.9.2/src ~/RPM/BUILD/linuxcnc-2.9.2 + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/linuxcnc-buildroot make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/bin \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../rtlib/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules /usr/libexec/rpm-build/install -p -m 4755 ../bin/linuxcnc_module_helper /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 4755 ../bin/rtapi_app /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../scripts/rtapi.conf /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/src/tmp/linuxcnc-buildroot/usr/lib \ /usr/src/tmp/linuxcnc-buildroot/lib/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles \ /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/*.py ../lib/python/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/rs274/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/touchy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gscreen/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/*.{py,ui,txt} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/designer/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/widget_icons/*.{png,gif} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/plugins/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins cp -dR ../lib/python/qtvcp/lib/* /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gmoccapy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/*.{py,png,glade} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/stepconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pncconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pyui/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/plasmac/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0755 ../bin/stepconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pncconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_input /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mitsub_vfd /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mqtt-publisher /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/z_level_compensation /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pmx485 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/sim-torch /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gladevcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis-remote /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/debuglevel /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/linuxcnctop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mdi /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_manualtoolchange /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/image-to-gcode /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/touchy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gscreen /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../lib/python/qtvcp/designer/install_script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -m 0755 ../bin/gmoccapy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/teach-in /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/scorbot-er-3 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pumagui ../bin/puma560gui ../bin/lineardelta ../bin/scaragui ../bin/hexagui ../bin/5axisgui ../bin/max5gui ../bin/maho600gui ../bin/hbmgui ../bin/rotarydelta ../bin/melfagui ../bin/millturngui ../bin/xyzac-trt-gui ../bin/xyzbc-trt-gui ../bin/xyzab-tdr-gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtplasmac-materials ../bin/qtplasmac-plasmac2qt ../bin/qtplasmac-cfg2prefs ../bin/qtplasmac_gcode ../bin/pmx485-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/linuxcnc-wizard.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/images/*.{png,gif,xbm,ngc} /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/tcl/*.tcl /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl /usr/libexec/rpm-build/install -p -m 0644 ../share/gscreen/images/*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images cp -dR ../share/gscreen/skins/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins cp -dR ../share/qtvcp/images/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images cp -dR ../share/qtvcp/screens/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens cp -dR ../share/qtvcp/panels/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels cp -dR ../share/qtvcp/widgets_ui/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui cp -dR ../share/gmoccapy/icons/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man1/*.1 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/hal_add_funct_to_thread.3hal ../docs/man/man3/hal_bit_t.3hal ../docs/man/man3/hal_bool.3hal ../docs/man/man3/hal_create_thread.3hal ../docs/man/man3/hal_del_funct_from_thread.3hal ../docs/man/man3/hal_exit.3hal ../docs/man/man3/hal_export_funct.3hal ../docs/man/man3/hal_float_t.3hal ../docs/man/man3/hal_get_lock.3hal ../docs/man/man3/hal_init.3hal ../docs/man/man3/hal_link.3hal ../docs/man/man3/hal_malloc.3hal ../docs/man/man3/hal_param_alias.3hal ../docs/man/man3/hal_param_bit_new.3hal ../docs/man/man3/hal_param_bit_newf.3hal ../docs/man/man3/hal_param_float_new.3hal ../docs/man/man3/hal_param_float_newf.3hal ../docs/man/man3/hal_param_new.3hal ../docs/man/man3/hal_param_s32_new.3hal ../docs/man/man3/hal_param_s32_newf.3hal ../docs/man/man3/hal_param_u32_new.3hal ../docs/man/man3/hal_param_u32_newf.3hal ../docs/man/man3/hal_parport.3hal ../docs/man/man3/hal_pin_alias.3hal ../docs/man/man3/hal_pin_bit_new.3hal ../docs/man/man3/hal_pin_bit_newf.3hal ../docs/man/man3/hal_pin_float_new.3hal ../docs/man/man3/hal_pin_float_newf.3hal ../docs/man/man3/hal_pin_new.3hal ../docs/man/man3/hal_pin_port_new.3hal ../docs/man/man3/hal_pin_port_newf.3hal ../docs/man/man3/hal_pin_s32_new.3hal ../docs/man/man3/hal_pin_s32_newf.3hal ../docs/man/man3/hal_pin_u32_new.3hal ../docs/man/man3/hal_pin_u32_newf.3hal ../docs/man/man3/hal_port.3hal ../docs/man/man3/hal_ready.3hal ../docs/man/man3/hal_s32_t.3hal ../docs/man/man3/hal_set_constructor.3hal ../docs/man/man3/hal_set_lock.3hal ../docs/man/man3/hal_signal_delete.3hal ../docs/man/man3/hal_signal_new.3hal ../docs/man/man3/hal_start_threads.3hal ../docs/man/man3/hal_stream.3hal ../docs/man/man3/hal_type_t.3hal ../docs/man/man3/hal_u32_t.3hal ../docs/man/man3/hal_unlink.3hal ../docs/man/man3/intro.3hal ../docs/man/man3/undocumented.3hal /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/EXPORT_FUNCTION.3rtapi ../docs/man/man3/MODULE_AUTHOR.3rtapi ../docs/man/man3/MODULE_DESCRIPTION.3rtapi ../docs/man/man3/MODULE_LICENSE.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi ../docs/man/man3/RTAPI_MP_INT.3rtapi ../docs/man/man3/RTAPI_MP_LONG.3rtapi ../docs/man/man3/RTAPI_MP_STRING.3rtapi ../docs/man/man3/intro.3rtapi ../docs/man/man3/rtapi_app_exit.3rtapi ../docs/man/man3/rtapi_app_main.3rtapi ../docs/man/man3/rtapi_atomic.3rtapi ../docs/man/man3/rtapi_bool.3rtapi ../docs/man/man3/rtapi_byteorder.3rtapi ../docs/man/man3/rtapi_clock_set_period.3rtapi ../docs/man/man3/rtapi_delay.3rtapi ../docs/man/man3/rtapi_delay_max.3rtapi ../docs/man/man3/rtapi_device.3rtapi ../docs/man/man3/rtapi_div_u64.3rtapi ../docs/man/man3/rtapi_div_u64_rem.3rtapi ../docs/man/man3/rtapi_exit.3rtapi ../docs/man/man3/rtapi_firmware.3rtapi ../docs/man/man3/rtapi_get_clocks.3rtapi ../docs/man/man3/rtapi_get_msg_level.3rtapi ../docs/man/man3/rtapi_get_time.3rtapi ../docs/man/man3/rtapi_gfp.3rtapi ../docs/man/man3/rtapi_inb.3rtapi ../docs/man/man3/rtapi_init.3rtapi ../docs/man/man3/rtapi_io.3rtapi ../docs/man/man3/rtapi_is.3rtapi ../docs/man/man3/rtapi_list.3rtapi ../docs/man/man3/rtapi_module_param.3rtapi ../docs/man/man3/rtapi_mutex.3rtapi ../docs/man/man3/rtapi_open_as_root.3rtapi ../docs/man/man3/rtapi_outb.3rtapi ../docs/man/man3/rtapi_parport.3rtapi ../docs/man/man3/rtapi_pci.3rtapi ../docs/man/man3/rtapi_print.3rtapi ../docs/man/man3/rtapi_prio.3rtapi ../docs/man/man3/rtapi_prio_highest.3rtapi ../docs/man/man3/rtapi_prio_lowest.3rtapi ../docs/man/man3/rtapi_prio_next_higher.3rtapi ../docs/man/man3/rtapi_prio_next_lower.3rtapi ../docs/man/man3/rtapi_region.3rtapi ../docs/man/man3/rtapi_release_region.3rtapi ../docs/man/man3/rtapi_request_region.3rtapi ../docs/man/man3/rtapi_set_msg_level.3rtapi ../docs/man/man3/rtapi_shmem.3rtapi ../docs/man/man3/rtapi_shmem_delete.3rtapi ../docs/man/man3/rtapi_shmem_getptr.3rtapi ../docs/man/man3/rtapi_shmem_new.3rtapi ../docs/man/man3/rtapi_slab.3rtapi ../docs/man/man3/rtapi_snprintf.3rtapi ../docs/man/man3/rtapi_stdint.3rtapi ../docs/man/man3/rtapi_string.3rtapi ../docs/man/man3/rtapi_strlcpy.3rtapi ../docs/man/man3/rtapi_task_delete.3rtapi ../docs/man/man3/rtapi_task_new.3rtapi ../docs/man/man3/rtapi_task_pause.3rtapi ../docs/man/man3/rtapi_task_resume.3rtapi ../docs/man/man3/rtapi_task_self.3rtapi ../docs/man/man3/rtapi_task_start.3rtapi ../docs/man/man3/rtapi_task_wait.3rtapi ../docs/man/man3/undocumented.3rtapi /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man9/abs.9 ../docs/man/man9/abs_s32.9 ../docs/man/man9/and2.9 ../docs/man/man9/anglejog.9 ../docs/man/man9/at_pid.9 ../docs/man/man9/axis.9 ../docs/man/man9/axistest.9 ../docs/man/man9/bin2gray.9 ../docs/man/man9/biquad.9 ../docs/man/man9/bitslice.9 ../docs/man/man9/bitwise.9 ../docs/man/man9/bldc.9 ../docs/man/man9/blend.9 ../docs/man/man9/carousel.9 ../docs/man/man9/charge_pump.9 ../docs/man/man9/clarke2.9 ../docs/man/man9/clarke3.9 ../docs/man/man9/clarkeinv.9 ../docs/man/man9/classicladder.9 ../docs/man/man9/comp.9 ../docs/man/man9/constant.9 ../docs/man/man9/conv_bit_float.9 ../docs/man/man9/conv_bit_s32.9 ../docs/man/man9/conv_bit_u32.9 ../docs/man/man9/conv_float_s32.9 ../docs/man/man9/conv_float_u32.9 ../docs/man/man9/conv_s32_bit.9 ../docs/man/man9/conv_s32_float.9 ../docs/man/man9/conv_s32_u32.9 ../docs/man/man9/conv_u32_bit.9 ../docs/man/man9/conv_u32_float.9 ../docs/man/man9/conv_u32_s32.9 ../docs/man/man9/corexy_by_hal.9 ../docs/man/man9/counter.9 ../docs/man/man9/dbounce.9 ../docs/man/man9/ddt.9 ../docs/man/man9/deadzone.9 ../docs/man/man9/debounce.9 ../docs/man/man9/demux.9 ../docs/man/man9/differential.9 ../docs/man/man9/div2.9 ../docs/man/man9/edge.9 ../docs/man/man9/encoder.9 ../docs/man/man9/encoder_ratio.9 ../docs/man/man9/enum.9 ../docs/man/man9/eoffset_per_angle.9 ../docs/man/man9/estop_latch.9 ../docs/man/man9/feedcomp.9 ../docs/man/man9/filter_kalman.9 ../docs/man/man9/flipflop.9 ../docs/man/man9/gantry.9 ../docs/man/man9/gantrykins.9 ../docs/man/man9/gearchange.9 ../docs/man/man9/genhexkins.9 ../docs/man/man9/genserkins.9 ../docs/man/man9/gentrivkins.9 ../docs/man/man9/gladevcp.9 ../docs/man/man9/gray2bin.9 ../docs/man/man9/hal_bb_gpio.9 ../docs/man/man9/hal_parport.9 ../docs/man/man9/histobins.9 ../docs/man/man9/hm2_7i43.9 ../docs/man/man9/hm2_7i90.9 ../docs/man/man9/hm2_eth.9 ../docs/man/man9/hm2_pci.9 ../docs/man/man9/hm2_rpspi.9 ../docs/man/man9/hm2_spi.9 ../docs/man/man9/homecomp.9 ../docs/man/man9/hostmot2.9 ../docs/man/man9/hypot.9 ../docs/man/man9/ilowpass.9 ../docs/man/man9/integ.9 ../docs/man/man9/invert.9 ../docs/man/man9/joyhandle.9 ../docs/man/man9/kins.9 ../docs/man/man9/knob2float.9 ../docs/man/man9/latencybins.9 ../docs/man/man9/lcd.9 ../docs/man/man9/limit1.9 ../docs/man/man9/limit2.9 ../docs/man/man9/limit3.9 ../docs/man/man9/limit_axis.9 ../docs/man/man9/lincurve.9 ../docs/man/man9/lineardeltakins.9 ../docs/man/man9/logic.9 ../docs/man/man9/lowpass.9 ../docs/man/man9/lut5.9 ../docs/man/man9/maj3.9 ../docs/man/man9/match8.9 ../docs/man/man9/matrix_kb.9 ../docs/man/man9/max31855.9 ../docs/man/man9/maxkins.9 ../docs/man/man9/mesa_7i65.9 ../docs/man/man9/mesa_pktgyro_test.9 ../docs/man/man9/mesa_uart.9 ../docs/man/man9/message.9 ../docs/man/man9/millturn.9 ../docs/man/man9/minmax.9 ../docs/man/man9/motion.9 ../docs/man/man9/moveoff.9 ../docs/man/man9/mult2.9 ../docs/man/man9/multiclick.9 ../docs/man/man9/multiswitch.9 ../docs/man/man9/mux16.9 ../docs/man/man9/mux2.9 ../docs/man/man9/mux4.9 ../docs/man/man9/mux8.9 ../docs/man/man9/mux_generic.9 ../docs/man/man9/near.9 ../docs/man/man9/not.9 ../docs/man/man9/offset.9 ../docs/man/man9/ohmic.9 ../docs/man/man9/oneshot.9 ../docs/man/man9/opto_ac5.9 ../docs/man/man9/or2.9 ../docs/man/man9/orient.9 ../docs/man/man9/pentakins.9 ../docs/man/man9/pid.9 ../docs/man/man9/plasmac.9 ../docs/man/man9/pumakins.9 ../docs/man/man9/pwmgen.9 ../docs/man/man9/rosekins.9 ../docs/man/man9/rotatekins.9 ../docs/man/man9/sample_hold.9 ../docs/man/man9/sampler.9 ../docs/man/man9/scale.9 ../docs/man/man9/scaled_s32_sums.9 ../docs/man/man9/scarakins.9 ../docs/man/man9/select8.9 ../docs/man/man9/serport.9 ../docs/man/man9/setsserial.9 ../docs/man/man9/siggen.9 ../docs/man/man9/sim_axis_hardware.9 ../docs/man/man9/sim_encoder.9 ../docs/man/man9/sim_home_switch.9 ../docs/man/man9/sim_matrix_kb.9 ../docs/man/man9/sim_parport.9 ../docs/man/man9/sim_spindle.9 ../docs/man/man9/simple_tp.9 ../docs/man/man9/sphereprobe.9 ../docs/man/man9/spindle.9 ../docs/man/man9/spindle_monitor.9 ../docs/man/man9/sserial.9 ../docs/man/man9/stepgen.9 ../docs/man/man9/steptest.9 ../docs/man/man9/streamer.9 ../docs/man/man9/sum2.9 ../docs/man/man9/supply.9 ../docs/man/man9/thc.9 ../docs/man/man9/thcud.9 ../docs/man/man9/threads.9 ../docs/man/man9/threadtest.9 ../docs/man/man9/time.9 ../docs/man/man9/timedelay.9 ../docs/man/man9/timedelta.9 ../docs/man/man9/tof.9 ../docs/man/man9/toggle.9 ../docs/man/man9/toggle2nist.9 ../docs/man/man9/ton.9 ../docs/man/man9/tp.9 ../docs/man/man9/tpcomp.9 ../docs/man/man9/tripodkins.9 ../docs/man/man9/tristate_bit.9 ../docs/man/man9/tristate_float.9 ../docs/man/man9/trivkins.9 ../docs/man/man9/updown.9 ../docs/man/man9/userkins.9 ../docs/man/man9/watchdog.9 ../docs/man/man9/wcomp.9 ../docs/man/man9/weighted_sum.9 ../docs/man/man9/xhc_hb04_util.9 ../docs/man/man9/xor2.9 ../docs/man/man9/xyzab_tdr_kins.9 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 /usr/libexec/rpm-build/install -p -m 0644 objects/*.msg /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs /usr/libexec/rpm-build/install -p -m 0755 ../scripts/realtime /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halrun /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halcmd_twopass /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/haltcl /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/simulate_probe /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/sim_pin /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../*.png ../*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../lib/hallib/* /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -m 0644 ../tcl/*.png /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc # install all the sample configs, including subdirs (tar is required on debian systems, and common on others) /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs ((cd ../configs && tar --exclude CVS --exclude .cvsignore --exclude .gitignore -cf - .) | (cd /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs && tar -xf -)) /usr/libexec/rpm-build/install -p -m 0755 ../bin/inivar ../bin/halstreamer ../bin/halsampler ../bin/panelui ../bin/mb2hal ../bin/gs2_vfd ../bin/hy_gt_vfd ../bin/svd-ps_vfd ../bin/shuttle ../bin/xhc-hb04 ../bin/sendkeys ../bin/thermistor ../bin/vfs11_vfd ../bin/classicladder ../bin/halcmd ../bin/halrmt ../bin/halmeter ../bin/halscope ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../bin/vfdb_vfd ../bin/wj200_vfd ../bin/pi500_vfd ../bin/hy_vfd ../bin/xhc-whb04b-6 ../bin/linuxcncrsh ../bin/schedrmt ../bin/linuxcnclcd ../bin/halui ../bin/linuxcncsvr ../bin/milltask ../bin/io ../bin/iov2 ../bin/genserkins ../bin/rs274 ../bin/motion-logger ../bin/tool_mmap_read ../bin/tool_watch ../bin/tooledit ../bin/ngcgui ../bin/pyngcgui ../bin/gremlin_view ../bin/halshow /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_info /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/setup_designer /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_var /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/monitor-xhc-hb04 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-plot /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/moveoff_gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/hal-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/xhc-hb04-accels /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/pyvcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/gladevcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcncmkdesktop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/update_ini /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halreport /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/libnml.so.0 ../lib/liblinuxcnchal.so.0 ../lib/liblinuxcnc.a ../lib/librs274.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 /usr/src/tmp/linuxcnc-buildroot/usr/lib cp --no-dereference ../lib/liblinuxcnchal.so ../lib/liblinuxcncini.so ../lib/libnml.so ../lib/libposemath.so ../lib/libpyplugin.so ../lib/librs274.so ../lib/libtooldata.so /usr/src/tmp/linuxcnc-buildroot/usr/lib ldconfig /usr/src/tmp/linuxcnc-buildroot/usr/lib /bin/bash: line 1: ldconfig: command not found make: [Makefile:734: install-kernel-indep] Error 127 (ignored) /usr/libexec/rpm-build/install -p -m 0644 ../lib/linuxcnc/canterp.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../include/linuxcnc.h ../include/emcIniFile.hh ../include/iniaxis.hh ../include/inijoint.hh ../include/inispindle.hh ../include/initraj.hh ../include/inihal.hh ../include/cubic.h ../include/kinematics.h ../include/switchkins.h ../include/genhexkins.h ../include/genserkins.h ../include/pentakins.h ../include/pumakins.h ../include/tc.h ../include/tc_types.h ../include/tcq.h ../include/tp.h ../include/tp_types.h ../include/spherical_arc.h ../include/blendmath.h ../include/emcmotcfg.h ../include/motion.h ../include/homing.h ../include/simple_tp.h ../include/state_tag.h ../include/usrmotintf.h ../include/axis.h ../include/canon.hh ../include/canon_position.hh ../include/emctool.h ../include/emc.hh ../include/emc_nml.hh ../include/emccfg.h ../include/emcglb.h ../include/emcpos.h ../include/emcpose.h ../include/interp_return.hh ../include/interpl.hh ../include/motion_types.h ../include/debugflags.h ../include/interp_internal.hh ../include/interp_fwd.hh ../include/interp_base.hh ../include/modal_state.hh ../include/rs274ngc.hh ../include/saicanon.hh ../include/hal.h ../include/hal_parport.h ../include/hostmot2-serial.h ../include/locmem.hh ../include/memsem.hh ../include/phantom.hh ../include/physmem.hh ../include/recvn.h ../include/rem_msg.hh ../include/sendn.h ../include/shmem.hh ../include/tcpmem.hh ../include/cms.hh ../include/cms_aup.hh ../include/cms_cfg.hh ../include/cms_dup.hh ../include/cms_srv.hh ../include/cms_up.hh ../include/cms_user.hh ../include/cms_xup.hh ../include/cmsdiag.hh ../include/tcp_opts.hh ../include/tcp_srv.hh ../include/inifile.h ../include/inifile.hh ../include/linklist.hh ../include/cmd_msg.hh ../include/nml.hh ../include/nml_mod.hh ../include/nml_oi.hh ../include/nml_srv.hh ../include/nml_type.hh ../include/nmldiag.hh ../include/nmlmsg.hh ../include/stat_msg.hh ../include/_sem.h ../include/sem.hh ../include/_shm.h ../include/shm.hh ../include/_timer.h ../include/timer.hh ../include/posemath.h ../include/gotypes.h ../include/gomath.h ../include/sincos.h ../include/rcs.hh ../include/rcs_exit.hh ../include/rcs_print.hh ../include/rcsversion.h ../include/rtapi.h ../include/rtapi_app.h ../include/rtapi_atomic.h ../include/rtapi_bitops.h ../include/rtapi_bool.h ../include/rtapi_byteorder.h ../include/rtapi_device.h ../include/rtapi_firmware.h ../include/rtapi_gfp.h ../include/rtapi_io.h ../include/rtapi_limits.h ../include/rtapi_list.h ../include/rtapi_math.h ../include/rtapi_math_i386.h ../include/rtapi_math64.h ../include/rtapi_mutex.h ../include/rtapi_parport.h ../include/rtapi_pci.h ../include/rtapi_slab.h ../include/rtapi_stdint.h ../include/rtapi_ctype.h ../include/rtapi_errno.h ../include/rtapi_string.h ../include/rtapi_vsnprintf.h /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/ cp -dR ../nc_files/3D_Chips.html ../nc_files/3D_Chips.ngc ../nc_files/3D_Chips.pdf ../nc_files/3dtest.ngc ../nc_files/M101 ../nc_files/M102.c ../nc_files/arcspiral.ngc ../nc_files/b-index.ngc ../nc_files/cds.ngc ../nc_files/comp-g1.ngc ../nc_files/comp.ngc ../nc_files/comp311.ngc ../nc_files/comp311_2.ngc ../nc_files/cone.ngc ../nc_files/daisy.ngc ../nc_files/factorial.ngc ../nc_files/filtertest-gui.py ../nc_files/filtertest.py ../nc_files/flowsnake.ngc ../nc_files/flowsnake.py ../nc_files/g20sub.ngc ../nc_files/g76.ngc ../nc_files/g881.ngc ../nc_files/g881min.ngc ../nc_files/g882.ngc ../nc_files/gcmc_lib ../nc_files/gladevcp_lib ../nc_files/gmoccapy_2_tools_with_cutter_radius_compensation.ngc ../nc_files/gridprobe.ngc ../nc_files/hole-circle.ngc ../nc_files/holecircle.py ../nc_files/increment.ngc ../nc_files/involute.py ../nc_files/lathe-g76.ngc ../nc_files/lathe_g70_71_demo.ngc ../nc_files/lathe_g7x_face_boring.ngc ../nc_files/lathe_g7x_quadrants.ngc ../nc_files/lathe_pawn.ngc ../nc_files/lathecomp.ngc ../nc_files/m250.ngc ../nc_files/m61demo.ngc ../nc_files/m6demo.ngc ../nc_files/m6remap.ngc ../nc_files/m70m72-demo.ngc ../nc_files/m73-demo.ngc ../nc_files/m75.ngc ../nc_files/m76.ngc ../nc_files/macros ../nc_files/mmount.ngc ../nc_files/nestedcall.ngc ../nc_files/ngcgui_lib ../nc_files/offsets.ngc ../nc_files/orphans ../nc_files/plasmac ../nc_files/plasmatest.ngc ../nc_files/polar.ngc ../nc_files/probe ../nc_files/probe-hole.ngc ../nc_files/remap-subroutines ../nc_files/remap_lib ../nc_files/retval.ngc ../nc_files/roparams.ngc ../nc_files/skeleton.ngc ../nc_files/smartprobe.ngc ../nc_files/spiral.ngc ../nc_files/systems.ngc ../nc_files/testm6fail.ngc ../nc_files/threading.ngc ../nc_files/tool-length-probe.ngc ../nc_files/toplevel.ngc ../nc_files/tort.ngc ../nc_files/torus.png ../nc_files/touchoff.ngc ../nc_files/useful-subroutines.ngc ../nc_files/x-trim.ngc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0755 ../nc_files/M101 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0644 ../tcl/TkLinuxCNC /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/libexec/rpm-build/install -p -m 0644 Makefile.modinc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/linuxcnc.tcl ../tcl/ngcgui.tcl ../tcl/ngcgui_app.tcl ../tcl/ngcgui_ttt.tcl ../tcl/pkgIndex.tcl ../tcl/show_errors.tcl ../tcl/tklinuxcnc.tcl ../tcl/tooledit.tcl ../tcl/twopass.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/hal.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/linuxcnc.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/pkgIndex.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/bin/cbutton.tcl ../tcl/bin/emccalib.tcl ../tcl/bin/emcdebug.tcl ../tcl/bin/emctesting.tcl ../tcl/bin/emctuning.tcl ../tcl/bin/genedit.tcl ../tcl/bin/halconfig.tcl ../tcl/bin/halshow.tcl ../tcl/bin/pickconfig.tcl ../tcl/bin/tkbackplot.tcl ../tcl/bin/popimage /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin /usr/libexec/rpm-build/install -p -m 0644 ../tcl/scripts/balloon.tcl ../tcl/scripts/emchelp.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0755 ../tcl/scripts/Set_Coordinates.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/stepconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/touchy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen2.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/gmoccapy/gmoccapy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/pncconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gremlin_view.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/popupkeyboard.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc_big.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/hal_python.xml /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs/ /usr/libexec/rpm-build/install -p -m 0644 ../share/glade/pixmaps/hicolor/22x22/actions/widget*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions/ /usr/libexec/rpm-build/install -p -m 0644 ../share/gtksourceview-2.0/language-specs/*.lang /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs/ /usr/libexec/rpm-build/install -p -m 0644 ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ for d in ../share/applications/linuxcnc.desktop ../share/applications/linuxcnc-latency.desktop ../share/applications/linuxcnc-latency-histogram.desktop ../share/applications/linuxcnc-pncconf.desktop ../share/applications/linuxcnc-stepconf.desktop ; do \ /usr/libexec/rpm-build/install -p -m 0644 $d /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ ; \ done /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/README.adoc ../docs/INSTALL.adoc ../docs/AUTHORS /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/help/asciidoc-markup_es.adoc ../docs/help/rtfaults.adoc ../docs/help/rtfaults_es.adoc ../docs/help/tklinuxcnc.adoc /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/etc/axis_light_background /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/README /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/README.axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.2/src' + popd ~/RPM/BUILD/linuxcnc-2.9.2 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + cp debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + desktop-file-install --dir /usr/src/tmp/linuxcnc-buildroot/usr/share/applications --remove-key=Version --remove-category=X-CNC --remove-category=Utility /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc.desktop + cat + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps + convert linuxcncicon.png -resize 16x16 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps + convert linuxcncicon.png -resize 32x32 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps + convert linuxcncicon.png -resize 48x48 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps/linuxcncicon.png + pushd /usr/src/tmp/linuxcnc-buildroot/usr/share/man ~/tmp/linuxcnc-buildroot/usr/share/man ~/RPM/BUILD/linuxcnc-2.9.2 ++ find -name '*.?' + xz ./man9/xyzab_tdr_kins.9 ./man9/xor2.9 ./man9/xhc_hb04_util.9 ./man9/weighted_sum.9 ./man9/wcomp.9 ./man9/watchdog.9 ./man9/userkins.9 ./man9/updown.9 ./man9/trivkins.9 ./man9/tristate_float.9 ./man9/tristate_bit.9 ./man9/tripodkins.9 ./man9/tpcomp.9 ./man9/tp.9 ./man9/ton.9 ./man9/toggle2nist.9 ./man9/toggle.9 ./man9/tof.9 ./man9/timedelta.9 ./man9/timedelay.9 ./man9/time.9 ./man9/threadtest.9 ./man9/threads.9 ./man9/thcud.9 ./man9/thc.9 ./man9/supply.9 ./man9/sum2.9 ./man9/streamer.9 ./man9/steptest.9 ./man9/stepgen.9 ./man9/sserial.9 ./man9/spindle_monitor.9 ./man9/spindle.9 ./man9/sphereprobe.9 ./man9/simple_tp.9 ./man9/sim_spindle.9 ./man9/sim_parport.9 ./man9/sim_matrix_kb.9 ./man9/sim_home_switch.9 ./man9/sim_encoder.9 ./man9/sim_axis_hardware.9 ./man9/siggen.9 ./man9/setsserial.9 ./man9/serport.9 ./man9/select8.9 ./man9/scarakins.9 ./man9/scaled_s32_sums.9 ./man9/scale.9 ./man9/sampler.9 ./man9/sample_hold.9 ./man9/rotatekins.9 ./man9/rosekins.9 ./man9/pwmgen.9 ./man9/pumakins.9 ./man9/plasmac.9 ./man9/pid.9 ./man9/pentakins.9 ./man9/orient.9 ./man9/or2.9 ./man9/opto_ac5.9 ./man9/oneshot.9 ./man9/ohmic.9 ./man9/offset.9 ./man9/not.9 ./man9/near.9 ./man9/mux_generic.9 ./man9/mux8.9 ./man9/mux4.9 ./man9/mux2.9 ./man9/mux16.9 ./man9/multiswitch.9 ./man9/multiclick.9 ./man9/mult2.9 ./man9/moveoff.9 ./man9/motion.9 ./man9/minmax.9 ./man9/millturn.9 ./man9/message.9 ./man9/mesa_uart.9 ./man9/mesa_pktgyro_test.9 ./man9/mesa_7i65.9 ./man9/maxkins.9 ./man9/max31855.9 ./man9/matrix_kb.9 ./man9/match8.9 ./man9/maj3.9 ./man9/lut5.9 ./man9/lowpass.9 ./man9/logic.9 ./man9/lineardeltakins.9 ./man9/lincurve.9 ./man9/limit_axis.9 ./man9/limit3.9 ./man9/limit2.9 ./man9/limit1.9 ./man9/lcd.9 ./man9/latencybins.9 ./man9/knob2float.9 ./man9/kins.9 ./man9/joyhandle.9 ./man9/invert.9 ./man9/integ.9 ./man9/ilowpass.9 ./man9/hypot.9 ./man9/hostmot2.9 ./man9/homecomp.9 ./man9/hm2_spi.9 ./man9/hm2_rpspi.9 ./man9/hm2_pci.9 ./man9/hm2_eth.9 ./man9/hm2_7i90.9 ./man9/hm2_7i43.9 ./man9/histobins.9 ./man9/hal_parport.9 ./man9/hal_bb_gpio.9 ./man9/gray2bin.9 ./man9/gladevcp.9 ./man9/gentrivkins.9 ./man9/genserkins.9 ./man9/genhexkins.9 ./man9/gearchange.9 ./man9/gantrykins.9 ./man9/gantry.9 ./man9/flipflop.9 ./man9/filter_kalman.9 ./man9/feedcomp.9 ./man9/estop_latch.9 ./man9/eoffset_per_angle.9 ./man9/enum.9 ./man9/encoder_ratio.9 ./man9/encoder.9 ./man9/edge.9 ./man9/div2.9 ./man9/differential.9 ./man9/demux.9 ./man9/debounce.9 ./man9/deadzone.9 ./man9/ddt.9 ./man9/dbounce.9 ./man9/counter.9 ./man9/corexy_by_hal.9 ./man9/conv_u32_s32.9 ./man9/conv_u32_float.9 ./man9/conv_u32_bit.9 ./man9/conv_s32_u32.9 ./man9/conv_s32_float.9 ./man9/conv_s32_bit.9 ./man9/conv_float_u32.9 ./man9/conv_float_s32.9 ./man9/conv_bit_u32.9 ./man9/conv_bit_s32.9 ./man9/conv_bit_float.9 ./man9/constant.9 ./man9/comp.9 ./man9/classicladder.9 ./man9/clarkeinv.9 ./man9/clarke3.9 ./man9/clarke2.9 ./man9/charge_pump.9 ./man9/carousel.9 ./man9/blend.9 ./man9/bldc.9 ./man9/bitwise.9 ./man9/bitslice.9 ./man9/biquad.9 ./man9/bin2gray.9 ./man9/axistest.9 ./man9/axis.9 ./man9/at_pid.9 ./man9/anglejog.9 ./man9/and2.9 ./man9/abs_s32.9 ./man9/abs.9 ./man1/xyzbc-trt-gui.1 ./man1/xyzac-trt-gui.1 ./man1/xhc-whb04b-6.1 ./man1/xhc-hb04.1 ./man1/xhc-hb04-accels.1 ./man1/wj200_vfd.1 ./man1/vfs11_vfd.1 ./man1/vfdb_vfd.1 ./man1/update_ini.1 ./man1/touchy.1 ./man1/tooledit.1 ./man1/thermistor.1 ./man1/teach-in.1 ./man1/svd-ps_vfd.1 ./man1/stepconf.1 ./man1/simulate_probe.1 ./man1/sim_pin.1 ./man1/sim-torch.1 ./man1/shuttle.1 ./man1/sendkeys.1 ./man1/scorbot-er-3.1 ./man1/schedrmt.1 ./man1/scaragui.1 ./man1/rtapi_app.1 ./man1/rs274.1 ./man1/rotarydelta.1 ./man1/qtvcp.1 ./man1/qtplasmac-setup.1 ./man1/qtplasmac-plasmac2qt.1 ./man1/qtplasmac-materials.1 ./man1/qtplasmac-cfg2prefs.1 ./man1/pyvcp_demo.1 ./man1/pyvcp.1 ./man1/pyui.1 ./man1/pyngcgui.1 ./man1/pumagui.1 ./man1/puma560gui.1 ./man1/pncconf.1 ./man1/pmx485.1 ./man1/pmx485-test.1 ./man1/pi500_vfd.1 ./man1/panelui.1 ./man1/ngcgui.1 ./man1/mqtt-publisher.1 ./man1/moveoff_gui.1 ./man1/motion-logger.1 ./man1/monitor-xhc-hb04.1 ./man1/mitsub_vfd.1 ./man1/milltask.1 ./man1/mdro.1 ./man1/mdi.1 ./man1/mb2hal.1 ./man1/max5gui.1 ./man1/maho600gui.1 ./man1/linuxcnctop.1 ./man1/linuxcncsvr.1 ./man1/linuxcncrsh.1 ./man1/linuxcncmkdesktop.1 ./man1/linuxcnclcd.1 ./man1/linuxcnc_var.1 ./man1/linuxcnc_module_helper.1 ./man1/linuxcnc_info.1 ./man1/linuxcnc.1 ./man1/lineardelta.1 ./man1/latency-test.1 ./man1/latency-plot.1 ./man1/latency-histogram.1 ./man1/iov2.1 ./man1/iocontrol.1 ./man1/io.1 ./man1/inivar.1 ./man1/image-to-gcode.1 ./man1/hy_vfd.1 ./man1/hy_gt_vfd.1 ./man1/hexagui.1 ./man1/hbmgui.1 ./man1/halui.1 ./man1/haltcl.1 ./man1/halstreamer.1 ./man1/halshow.1 ./man1/halscope.1 ./man1/halsampler.1 ./man1/halrun.1 ./man1/halrmt.1 ./man1/halreport.1 ./man1/halmeter.1 ./man1/halcompile.1 ./man1/halcmd_twopass.1 ./man1/halcmd.1 ./man1/hal_manualtoolchange.1 ./man1/hal_input.1 ./man1/hal-histogram.1 ./man1/gscreen.1 ./man1/gs2_vfd.1 ./man1/gremlin_view.1 ./man1/gmoccapy.1 ./man1/gladevcp_demo.1 ./man1/gladevcp.1 ./man1/emccalib.1 ./man1/elbpcom.1 ./man1/debuglevel.1 ./man1/axis.1 ./man1/axis-remote.1 ./man1/5axisgui.1 + popd ~/RPM/BUILD/linuxcnc-2.9.2 + rm /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnc.a + /usr/lib/rpm/find-lang linuxcnc gmoccapy --output=linuxcnc.lang + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/linuxcnc-buildroot (auto) mode of './usr/bin/rtapi_app' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) mode of './usr/bin/linuxcnc_module_helper' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) Verifying and fixing files in /usr/src/tmp/linuxcnc-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) Checking contents of files in /usr/src/tmp/linuxcnc-buildroot/ (default) Compressing files in /usr/src/tmp/linuxcnc-buildroot (auto) removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' Adjusting library links in /usr/src/tmp/linuxcnc-buildroot ./lib: (from :0) ./usr/lib: (from :0) liblinuxcncini.so.0 -> liblinuxcncini.so.0 libposemath.so.0 -> libposemath.so.0 libnml.so.0 -> libnml.so.0 liblinuxcnchal.so.0 -> liblinuxcnchal.so.0 librs274.so.0 -> librs274.so.0 libpyplugin.so.0 -> libpyplugin.so.0 libtooldata.so.0 -> libtooldata.so.0 ./usr/lib/python3/site-packages/qtvcp/lib: (from :0) Verifying ELF objects in /usr/src/tmp/linuxcnc-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=relaxed) verify-elf: WARNING: ./usr/bin/motion-logger: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/rs274: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/milltask: uses non-LFS functions: fopen freopen stat verify-elf: WARNING: ./usr/bin/linuxcnclcd: uses non-LFS functions: fcntl lstat readdir verify-elf: WARNING: ./usr/bin/hy_vfd: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/vfdb_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halscope: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halrmt: uses non-LFS functions: fcntl fopen stat verify-elf: WARNING: ./usr/bin/halcmd: uses non-LFS functions: fcntl fopen readdir verify-elf: WARNING: ./usr/bin/classicladder: uses non-LFS functions: fcntl fopen open readdir verify-elf: WARNING: ./usr/bin/vfs11_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/sendkeys: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/xhc-hb04: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/shuttle: uses non-LFS functions: glob open verify-elf: WARNING: ./usr/bin/mb2hal: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halsampler: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/halstreamer: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/rtapi_app: uses non-LFS functions: __open_2 fopen mmap open setrlimit stat verify-elf: WARNING: ./usr/bin/linuxcnc_module_helper: uses non-LFS functions: readdir verify-elf: WARNING: ./usr/lib/libtooldata.so.0: uses non-LFS functions: fopen lseek mmap open verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_XOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_BOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_UOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_PROBE_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_MOTION_CONTROL_MODEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_SPEEDi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_BLOCK_DELETEb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16GET_BLOCK_DELETEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14IO_PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SPINDLE_RETRACTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_PLANEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10NURBS_FEEDiSt6vectorI13CONTROL_POINTSaIS0_EEj verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21GET_EXTERNAL_TC_FAULTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10UPDATE_TAG8StateTag verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15RELOAD_TOOLDATAv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23CLEAR_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10CLAMP_AXIS10CANON_AXIS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11LOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_PARAMETER_FILE_NAMEPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z4WAITiiid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_VOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12START_CHANGEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_COFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_TRAVERSE_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25SET_OPTIONAL_PROGRAM_STOPb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17GET_EXTERNAL_MISTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24SPINDLE_RETRACT_TRAVERSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z3LOGPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_ANALOG_INPUTid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z27GET_EXTERNAL_OFFSET_APPLIEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_FEED_HOLD_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PARAMETER_FILE_NAMEPci verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_OFFSETSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22SET_NAIVECAM_TOLERANCEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_LENGTH_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9RIGID_TAPidddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31STOP_CUTTER_RADIUS_COMPENSATIONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8LOGCLOSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_MODEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_FEED_OVERRIDE_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20CLEAR_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_AXIS_MASKv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13UNLOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G5X_OFFSETiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z6FINISHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_FEED_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_FLOODv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ON_RESETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_TRAVERSE_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G92_OFFSETddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31GET_EXTERNAL_SELECTED_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_DIGITAL_INPUTii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_SPINDLE_MODEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SET_XY_ROTATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7LOGOPENPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_ANGLE_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z46GET_EXTERNAL_MOTION_CONTROL_NAIVECAM_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_SPINDLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z36GET_EXTERNAL_SPINDLE_OVERRIDE_ENABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32START_CUTTER_RADIUS_COMPENSATIONi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_YOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30SET_CUTTER_RADIUS_COMPENSATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_WOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9LOGAPPENDPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17DISABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: USER_DEFINED_FUNCTION verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _task verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_AUX_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_AOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_QUEUE_EMPTYv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PROBE_TRIPPED_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: builtin_modules verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18CHANGE_TOOL_NUMBERi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_TOOL_TABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22USE_TOOL_LENGTH_OFFSET7EmcPose verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_ZOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21SET_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16ENABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_TOOL_TABLE_ENTRYii7EmcPosedddi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z37GET_EXTERNAL_MOTION_CONTROL_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_ADAPTIVE_FEED_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20USE_NO_SPINDLE_FORCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CANON_ERRORPKcz verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z28WAIT_SPINDLE_ORIENT_COMPLETEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TC_REASONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_LENGTH_UNIT_TYPEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/liblinuxcnchal.so.0: uses non-LFS functions: fopen stat verify-elf: WARNING: ./usr/lib/libnml.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/liblinuxcncini.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXDestroyContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryServerString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDeleteLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDrawBuffer verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryExtension verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXMakeCurrent verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glFlush verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGetString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXCreateContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXUseXFont verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGenLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXChooseVisual verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXGetConfig verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glViewport verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXSwapBuffers verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/linuxcnc.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/hal.so: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_destroy verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hm2_get_sserial verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_shmem_base verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_del_funct_from_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_detach verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_writable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_write verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_maxdepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitch verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_stop_threads verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpRunCycle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_allhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetMotionType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetCycleTime verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetTermCond verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsForward verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_index_enable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetRunDir verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: write_homing_out_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_sequence verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpActiveDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotData verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetSpindleSync verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_synchronized verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_cancel_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsInverse verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitchable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecTag verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_needs_unlock_first verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_is_active verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVlimit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddCircle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetDout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpIsDone verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpPause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpCreate verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddRigidTap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpResume verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homeMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_unhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tcqFull verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_idle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAbort verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_home_joint verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: read_homing_in_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpQueueDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddLine verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_at_index_search_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homing_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpClear verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_get_pktuart verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_tram_add_bspi_frame verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_allocate_bspi_tram verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_clear_fifo verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_setup_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_write_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_set_read_function verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_free verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_alias verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: uses non-LFS functions: open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: uses non-LFS functions: fopen mmap stat verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_task_self verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: uses non-LFS functions: fopen mmap open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_next_lower verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_vsnprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_pause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_start verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_clock_set_period verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_highest verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: uses non-LFS functions: mmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print Splitting links to aliased files under /{,s}bin in /usr/src/tmp/linuxcnc-buildroot Bytecompiling python3 modules in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Bytecompiling python3 modules with optimization in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -O /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Bytecompiling python3 modules with optimization-2 in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -OO /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\T' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\C' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\P' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py:319: SyntaxWarning: invalid escape sequence '\M' self.qtplasmac_bnames = ["OHMIC\TEST","PROBE\TEST","SINGLE\CUT","NORMAL\CUT","TORCH\PULSE","FRAMING", "USER\MANUAL", \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:170: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:171: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:174: SyntaxWarning: invalid escape sequence '\d' valid_size = QtGui.QRegExpValidator(QRegExp('^((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:175: SyntaxWarning: invalid escape sequence '\d' valid_radius = QtGui.QRegExpValidator(QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:176: SyntaxWarning: invalid escape sequence '\d' valid_feed = QtGui.QRegExpValidator(QRegExp('\d{0,5}[.]\d{0,1}')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:178: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_spindle.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,5}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py:181: SyntaxWarning: invalid escape sequence '\d' self.lineEdit_first.setValidator(QtGui.QRegExpValidator(QRegExp('\d{0,3}[.]\d{0,2}'))) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py:154: SyntaxWarning: invalid escape sequence '\d' valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:49: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,4})?)|(\.\d{,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py:51: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QRegExp('^[+-]?((\d+(\.\d{,3})?)|(\.\d{,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:57: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,4}(\.\d{1,3})?)|(\.\d{1,3}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py:59: SyntaxWarning: invalid escape sequence '\d' self.valid = QtGui.QRegExpValidator(QtCore.QRegExp('^((\d{1,3}(\.\d{1,4})?)|(\.\d{1,4}))$')) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py:769: SyntaxWarning: invalid escape sequence '\d' s = re.split("(\d+)", s) /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2207: SyntaxWarning: invalid escape sequence '\(' e_message = ".*Runtime message\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2208: SyntaxWarning: invalid escape sequence '\(' e_warning = ".*Runtime warning\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py:2209: SyntaxWarning: invalid escape sequence '\(' e_error = ".*Runtime error\(\): *(.*)" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:30: SyntaxWarning: invalid escape sequence '\.' validate_float = "expr {[regexp {^-?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py:32: SyntaxWarning: invalid escape sequence '\.' validate_posfloat = "expr {[regexp {^?([0-9]+(\.[0-9]*)?|\.[0-9]+|)$} %P]}" compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Hardlinking identical .pyc and .opt-?.pyc files './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/glnav.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/glnav.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hal.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-312.pyc' './usr/lib/python3/site-packages/__pycache__/vismach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vismach.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-312.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-312.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-312.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-312.opt-1.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-2.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-312.opt-1.pyc' Processing files: linuxcnc-2.9.2-alt4.20240203 warning: File listed twice: /usr/lib/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/canterp.so warning: File listed twice: /usr/lib/linuxcnc/modules warning: File listed twice: /usr/lib/linuxcnc/modules/5axiskins.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/and2.so warning: File listed twice: /usr/lib/linuxcnc/modules/anglejog.so warning: File listed twice: /usr/lib/linuxcnc/modules/axistest.so warning: File listed twice: /usr/lib/linuxcnc/modules/bin2gray.so warning: File listed twice: /usr/lib/linuxcnc/modules/biquad.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitslice.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitwise.so warning: File listed twice: /usr/lib/linuxcnc/modules/bldc.so warning: File listed twice: /usr/lib/linuxcnc/modules/blend.so warning: File listed twice: /usr/lib/linuxcnc/modules/boss_plc.so warning: File listed twice: /usr/lib/linuxcnc/modules/carousel.so warning: File listed twice: /usr/lib/linuxcnc/modules/charge_pump.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke2.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke3.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarkeinv.so warning: File listed twice: /usr/lib/linuxcnc/modules/classicladder_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/comp.so warning: File listed twice: /usr/lib/linuxcnc/modules/constant.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexy_by_hal.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexykins.so warning: File listed twice: /usr/lib/linuxcnc/modules/counter.so warning: File listed twice: /usr/lib/linuxcnc/modules/dbounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/ddt.so warning: File listed twice: /usr/lib/linuxcnc/modules/deadzone.so warning: File listed twice: /usr/lib/linuxcnc/modules/debounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/demux.so warning: File listed twice: /usr/lib/linuxcnc/modules/differential.so warning: File listed twice: /usr/lib/linuxcnc/modules/div2.so warning: File listed twice: /usr/lib/linuxcnc/modules/edge.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder_ratio.so warning: File listed twice: /usr/lib/linuxcnc/modules/enum.so warning: File listed twice: /usr/lib/linuxcnc/modules/eoffset_per_angle.so warning: File listed twice: /usr/lib/linuxcnc/modules/estop_latch.so warning: File listed twice: /usr/lib/linuxcnc/modules/feedcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/filter_kalman.so warning: File listed twice: /usr/lib/linuxcnc/modules/flipflop.so warning: File listed twice: /usr/lib/linuxcnc/modules/gantry.so warning: File listed twice: /usr/lib/linuxcnc/modules/gearchange.so warning: File listed twice: /usr/lib/linuxcnc/modules/genhexkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/genserkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/gray2bin.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_bb_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_gm.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_lib.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_pi_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_ppmc.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_speaker.so warning: File listed twice: /usr/lib/linuxcnc/modules/histobins.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i43.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i90.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_eth.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_pci.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_rpspi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_spi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/homecomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/homemod.so warning: File listed twice: /usr/lib/linuxcnc/modules/hostmot2.so warning: File listed twice: /usr/lib/linuxcnc/modules/hypot.so warning: File listed twice: /usr/lib/linuxcnc/modules/ilowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/integ.so warning: File listed twice: /usr/lib/linuxcnc/modules/invert.so warning: File listed twice: /usr/lib/linuxcnc/modules/joyhandle.so warning: File listed twice: /usr/lib/linuxcnc/modules/knob2float.so warning: File listed twice: /usr/lib/linuxcnc/modules/latencybins.so warning: File listed twice: /usr/lib/linuxcnc/modules/lcd.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit1.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit2.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit3.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit_axis.so warning: File listed twice: /usr/lib/linuxcnc/modules/lincurve.so warning: File listed twice: /usr/lib/linuxcnc/modules/lineardeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/modules/logic.so warning: File listed twice: /usr/lib/linuxcnc/modules/lowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/lut5.so warning: File listed twice: /usr/lib/linuxcnc/modules/maj3.so warning: File listed twice: /usr/lib/linuxcnc/modules/match8.so warning: File listed twice: /usr/lib/linuxcnc/modules/matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/max31855.so warning: File listed twice: /usr/lib/linuxcnc/modules/maxkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_7i65.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_uart.so warning: File listed twice: /usr/lib/linuxcnc/modules/message.so warning: File listed twice: /usr/lib/linuxcnc/modules/millturn.so warning: File listed twice: /usr/lib/linuxcnc/modules/minmax.so warning: File listed twice: /usr/lib/linuxcnc/modules/modmath.so warning: File listed twice: /usr/lib/linuxcnc/modules/motmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/moveoff.so warning: File listed twice: /usr/lib/linuxcnc/modules/mult2.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiclick.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiswitch.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux16.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux2.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux4.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux8.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux_generic.so warning: File listed twice: /usr/lib/linuxcnc/modules/near.so warning: File listed twice: /usr/lib/linuxcnc/modules/not.so warning: File listed twice: /usr/lib/linuxcnc/modules/offset.so warning: File listed twice: /usr/lib/linuxcnc/modules/ohmic.so warning: File listed twice: /usr/lib/linuxcnc/modules/oneshot.so warning: File listed twice: /usr/lib/linuxcnc/modules/or2.so warning: File listed twice: /usr/lib/linuxcnc/modules/orient.so warning: File listed twice: /usr/lib/linuxcnc/modules/pentakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pid.so warning: File listed twice: /usr/lib/linuxcnc/modules/plasmac.so warning: File listed twice: /usr/lib/linuxcnc/modules/pumakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pwmgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/rosekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotarydeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotatekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/sample_hold.so warning: File listed twice: /usr/lib/linuxcnc/modules/sampler.so warning: File listed twice: /usr/lib/linuxcnc/modules/scale.so warning: File listed twice: /usr/lib/linuxcnc/modules/scaled_s32_sums.so warning: File listed twice: /usr/lib/linuxcnc/modules/scarakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/scope_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/scorbot-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/select8.so warning: File listed twice: /usr/lib/linuxcnc/modules/serport.so warning: File listed twice: /usr/lib/linuxcnc/modules/setsserial.so warning: File listed twice: /usr/lib/linuxcnc/modules/siggen.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_axis_hardware.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_home_switch.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/simple_tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/sphereprobe.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle_monitor.so warning: File listed twice: /usr/lib/linuxcnc/modules/stepgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/steptest.so warning: File listed twice: /usr/lib/linuxcnc/modules/streamer.so warning: File listed twice: /usr/lib/linuxcnc/modules/sum2.so warning: File listed twice: /usr/lib/linuxcnc/modules/supply.so warning: File listed twice: /usr/lib/linuxcnc/modules/thc.so warning: File listed twice: /usr/lib/linuxcnc/modules/thcud.so warning: File listed twice: /usr/lib/linuxcnc/modules/threads.so warning: File listed twice: /usr/lib/linuxcnc/modules/threadtest.so warning: File listed twice: /usr/lib/linuxcnc/modules/time.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelay.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelta.so warning: File listed twice: /usr/lib/linuxcnc/modules/tof.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle2nist.so warning: File listed twice: /usr/lib/linuxcnc/modules/ton.so warning: File listed twice: /usr/lib/linuxcnc/modules/tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/tpmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/tripodkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/trivkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/updown.so warning: File listed twice: /usr/lib/linuxcnc/modules/userkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/watchdog.so warning: File listed twice: /usr/lib/linuxcnc/modules/wcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/weighted_sum.so warning: File listed twice: /usr/lib/linuxcnc/modules/xhc_hb04_util.so warning: File listed twice: /usr/lib/linuxcnc/modules/xor2.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/realtime Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.APOsfA find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py provides python3(screens.x1mill.x1mill_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py provides python3(screens.woodpecker.woodpecker_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py provides python3(screens.tester.tester_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py provides python3(screens.qttouchy.qttouchy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py provides python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py provides python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py provides python3(screens.qtplasmac.qtplasmac_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py provides python3(screens.qtplasmac.languages.qtplasmac)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py provides python3(screens.qtlathe.qtlathe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py provides python3(screens.qtdragon_hd.qtdragon_hd_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py provides python3(screens.qtdragon.qtdragon_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py provides python3(screens.qtaxis.qtaxis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py provides python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py provides python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py provides python3(screens.qt_cnc.qt_cnc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py provides python3(screens.blender.blender_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py provides python3(panels.vismach_scara.vismach_scara_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py provides python3(panels.vismach_router_atc.vismach_router_atc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py provides python3(panels.vismach_millturn.vismach_millturn_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py provides python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py provides python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py provides python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py provides python3(panels.versaprobe.versaprobe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py provides python3(panels.tool_dialog.tool_dialog_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py provides python3(panels.test_probe.test_probe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py provides python3(panels.test_panel.test_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py provides python3(panels.test_led.test_led_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py provides python3(panels.test_dial.test_dial_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py provides python3(panels.test_button.test_button_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py provides python3(panels.spindle_belts.spindle_belts_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py provides python3(panels.sim_panel.sim_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py provides python3(panels.qtplasmac_sim.qtplasmac_sim_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py provides python3(panels.copy.copy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py provides python3(panels.cam_align.cam_align_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py provides python3(involute)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py provides python3(holecircle)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py provides python3(flowsnake)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py provides python3(filtertest)(under non-std path /usr/share/linuxcnc/ncfiles) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.mDmtPo find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gcode.so: underlinked libraries: /lib/libpython3.12.so.1.0 lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/linuxcnc.so: underlinked libraries: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0 python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so :550: SyntaxWarning: invalid escape sequence '\.' :552: SyntaxWarning: invalid escape sequence '\.' :289: SyntaxWarning: invalid escape sequence '\ ' :295: SyntaxWarning: invalid escape sequence '\ ' :299: SyntaxWarning: invalid escape sequence '\ ' :303: SyntaxWarning: invalid escape sequence '\ ' :306: SyntaxWarning: invalid escape sequence '\ ' :310: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :314: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :317: SyntaxWarning: invalid escape sequence '\ ' :320: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :323: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :326: SyntaxWarning: invalid escape sequence '\ ' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\T' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\C' :446: SyntaxWarning: invalid escape sequence '\P' :446: SyntaxWarning: invalid escape sequence '\M' :17: SyntaxWarning: invalid escape sequence '\s' :181: SyntaxWarning: invalid escape sequence '\s' :193: SyntaxWarning: invalid escape sequence '\[' :199: SyntaxWarning: invalid escape sequence '\[' :218: SyntaxWarning: invalid escape sequence '\[' :236: SyntaxWarning: invalid escape sequence '\[' :267: SyntaxWarning: invalid escape sequence '\w' :270: SyntaxWarning: invalid escape sequence '\w' :274: SyntaxWarning: invalid escape sequence '\w' :289: SyntaxWarning: invalid escape sequence '\d' :301: SyntaxWarning: invalid escape sequence '\[' :309: SyntaxWarning: invalid escape sequence '\s' :341: SyntaxWarning: invalid escape sequence '\[' :342: SyntaxWarning: invalid escape sequence '\[' :388: SyntaxWarning: invalid escape sequence '\[' :390: SyntaxWarning: invalid escape sequence '\[' :394: SyntaxWarning: invalid escape sequence '\[' :395: SyntaxWarning: invalid escape sequence '\[' :396: SyntaxWarning: invalid escape sequence '\.' :398: SyntaxWarning: invalid escape sequence '\[' :487: SyntaxWarning: invalid escape sequence '\[' :498: SyntaxWarning: invalid escape sequence '\s' :769: SyntaxWarning: invalid escape sequence '\d' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\T' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\C' :319: SyntaxWarning: invalid escape sequence '\P' :319: SyntaxWarning: invalid escape sequence '\M' :2207: SyntaxWarning: invalid escape sequence '\(' :2208: SyntaxWarning: invalid escape sequence '\(' :2209: SyntaxWarning: invalid escape sequence '\(' :170: SyntaxWarning: invalid escape sequence '\d' :171: SyntaxWarning: invalid escape sequence '\d' :174: SyntaxWarning: invalid escape sequence '\d' :175: SyntaxWarning: invalid escape sequence '\d' :176: SyntaxWarning: invalid escape sequence '\d' :178: SyntaxWarning: invalid escape sequence '\d' :181: SyntaxWarning: invalid escape sequence '\d' :154: SyntaxWarning: invalid escape sequence '\d' :6109: SyntaxWarning: invalid escape sequence '\[' :49: SyntaxWarning: invalid escape sequence '\d' :51: SyntaxWarning: invalid escape sequence '\d' :57: SyntaxWarning: invalid escape sequence '\d' :59: SyntaxWarning: invalid escape sequence '\d' :30: SyntaxWarning: invalid escape sequence '\.' :32: SyntaxWarning: invalid escape sequence '\.' py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "atexit" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "errno" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "_thread" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "gcode" lines:[59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.OpenGLTk" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.interpret" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hershey" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "propertywindow" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.options" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "nf" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "bwidget" lines:[69] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "linuxcnc" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "glnav" lines:[72] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hal" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "subprocess" lines:[[1113], [[3962]], [4034]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "webbrowser" lines:[[[2089]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "vcpparse" lines:[[[3926]], [[[4049]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "_thread" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "linuxcnc" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "time" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "rs274.options" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: skipping "sys" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "hal" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.makepins" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.gladebuilder" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.core" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal_glib" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "sys" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "atexit" lines:[42] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "linuxcnc" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "time" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "qtvcp" lines:[[5801]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.makepins" lines:[[5823]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.combi_dro" lines:[[5824]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gmoccapy" lines:[[5825, 5826, 5827, 5828, 5829, 5830], [[5832]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gremlin_view: "gremlin_view" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "qtvcp" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal" lines:[92] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "errno" lines:[93] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gladevcp.makepins" lines:[94] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "atexit" lines:[96] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "time" lines:[97, 98] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal_glib" lines:[99] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "linuxcnc" lines:[197] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gscreen" lines:[198, 199, 200, 201] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gi.repository" lines:[[119], [131], [141]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "distro" lines:[[[165]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "inspect" lines:[[[889]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "collections" lines:[[[890]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "subprocess" lines:[[[3941]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "linux_event" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "hal" lines:[22, 28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "nf" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "rs274.options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "sys" lines:[22, 402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "time" lines:[402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "hal" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: skipping "sys" lines:[12] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.author" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.options" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "PIL" lines:[[29], [[502]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "Image" lines:[[[31]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter" lines:[[499], [[757]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "pickle" lines:[[506]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "nf" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "ImageTk" lines:[[[[504]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter.filedialog" lines:[[[758]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "vismach" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "lineardeltakins" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "linuxcnc" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "rs274.options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "tkinter" lines:[[122]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "_tkinter" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "vismach" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "hal" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "getopt" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "sys" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/modcompile: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "time" lines:[31] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "hal" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "linuxcnc" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "paho.mqtt.client" lines:[[[[53]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "optparse" lines:[[[118]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "time" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial.tools.list_ports" lines:[[32]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "errno" lines:[38] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "copy" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "multifilebuilder" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "touchy" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "pncconf" lines:[54, 55, 56, 57, 58, 59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "hal" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "vismach" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "hal" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyngcgui: "pyngcgui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyui: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: skipping "sys" lines:[37] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "vcpparse" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "hal" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: "json" lines:[[[[[[336]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "tkinter" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtCore" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtGui" lines:[[39]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtWidgets" lines:[[40]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebEngineWidgets" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebKitWidgets" lines:[[[[18]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp" lines:[[[117]], [533]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "linuxcnc" lines:[[[[152]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.lib" lines:[[[[[329]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.core" lines:[[[450]], [553]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "rotarydeltakins" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: skipping "sys" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "vismach" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: "hal" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "hal" lines:[35, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "errno" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "time" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "multifilebuilder" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "stepconf" lines:[116, 117, 118] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "defusedexpat" lines:[[47]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "xml.parsers" lines:[[[49]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "sys" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "atexit" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "time" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "linuxcnc" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "touchy" lines:[62, 63, 64, 65, 66, 67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "subprocess" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "datetime" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "vismach" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "hal" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "linuxcnc" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "scipy.interpolate" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py: "sys" lines:[[112]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py: skipping "sys" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "gladevcp.hal_pythonplugin" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "importlib" lines:[[4]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "linuxcnc" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "hal_glib" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "gladevcp.gtk_action" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "linuxcnc" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "qtvcp" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "hal" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "gladevcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "sys" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "time" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "atexit" lines:[829] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "subprocess" lines:[[[601], [617]], [[838]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp.core" lines:[[915]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.core" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "gladevcp.hal_widgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "gladevcp.hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "atexit" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_actions" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "subprocess" lines:[[[37]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "hal_widgets" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "linuxcnc" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gremlin" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "rs274.glcanon" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gcode" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_glib" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_actions" lines:[[41]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gladevcp.hal_actions" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "subprocess" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gremlin_view" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gladevcp" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "hal_widgets" lines:[[46]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "gladevcp.hal_widgets" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_glib" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.core" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_actions" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_actions" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "gladevcp.hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "pyngcgui" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "gladevcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_widgets" lines:[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.status_label" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.state_label" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.led" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.calculatorwidget" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.tooledit_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.drowidget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.iconview" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.combi_dro" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetwidget" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetpage_widget" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_bar" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_meter" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_graph" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_lightbutton" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.overridewidget" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.jogwheel" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.speedcontrol" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_dial" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_actions" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_filechooser" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_sourceview" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_mdihistory" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.macro_widget" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_pyngcgui" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin_plus" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "linuxcnc" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "hal_glib" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_widgets" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_actions" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_filechooser" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "os" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "tempfile" lines:[[302]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py: "hal" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py: "qtvcp" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "gladevcp.hal_widgets" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "hal_widgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "gladevcp.hal_widgets" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_actions" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_actions" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.gladebuilder" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.hal_widgets" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.led" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "hal_glib" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.gladebuilder" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_widgets" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_actions" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "gladevcp.hal_widgets" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_widgets" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "gladevcp.hal_widgets" lines:[[26]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_widgets" lines:[[23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "gladevcp.hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib" lines:[[16], [73]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.xobject" lines:[[17], [74]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.protocol" lines:[[72]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py: "gladevcp.makepins" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "itertools" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi" lines:[[9]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi.repository" lines:[[12, 13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "cairo" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py: "gladevcp" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "qtvcp" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "gmoccapy" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "icon_theme_helper" lines:[[[40]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "gi.repository" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "sys" lines:[46] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "glnav" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.interpret" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "linuxcnc" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "gcode" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "time" lines:[68] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "_thread" lines:[74] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib.display" lines:[[56]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "sys" lines:[80] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "gladevcp.hal_actions" lines:[81] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "linuxcnc" lines:[82] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "time" lines:[83] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "glib" lines:[87] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "getopt" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py: "_hal" lines:[30, 31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "_hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "sys" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "time" lines:[8] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: "configparser" lines:[[[1960]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: "linuxcnc" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: skipping "sys" lines:[57] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: skipping "sys" lines:[62] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "linuxcnc" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "hal" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp" lines:[74] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp.hal_filechooser" lines:[[212]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gi.repository.GdkPixbuf" lines:[[456]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[[[[2987]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "glib" lines:[[[[2988]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "hal" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[[[35]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "zmq" lines:[[[[[[94]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "sys" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "hal" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "bwidget" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "time" lines:[55] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "vcpparse" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.dom.minidom" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.parsers.expat" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "rs274.options" lines:[[[1745]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "_thread" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "glnav" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "rs274" lines:[31, 32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "gcode" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp.widgets.fake_status" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "PyQt5.QtOpenGL" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "OpenGL" lines:[[22, 23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_pstat" lines:[288] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_action" lines:[302] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_tstat" lines:[318] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp.core" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi" lines:[[31], [279]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi.repository" lines:[[33], [280]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "espeak" lines:[[54]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "queue" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "distro" lines:[[[[98]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: skipping "time" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/colored_formatter.py: "logging" lines:[[116]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "atexit" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "linuxcnc" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "atexit" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "linuxcnc" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "atexit" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.qt_makegui" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.lib" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp.core" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "hal" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "sys" lines:[[189]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "PyQt5.QtCore" lines:[[190]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.lib" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "gladevcp.hal_filechooser" lines:[[879]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "popplerqt5" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/mill_xyz.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: skipping "itertools" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi.repository" lines:[[13, 14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "cairo" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: "qtvcp.lib.qt_vismach.primitives" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: skipping "plasmac" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.lib.qtplasmac" lines:[29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py: "cv2" lines:[[[270]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: skipping "sys" lines:[97] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter" lines:[[101]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.filedialog" lines:[[102]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.messagebox" lines:[[103]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "Tkinter" lines:[[105]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFileDialog" lines:[[106]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkMessageBox" lines:[[107]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "psyco" lines:[[114]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFont" lines:[[[6408]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.font" lines:[[[[6411]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "dbus.mainloop.pyqt5" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "sys" lines:[[255]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "PyQt5.QtCore" lines:[[256]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.qt_makegui" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.lib.aux_program_loader" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "qtvcp" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "hal_glib" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py: skipping "time" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.lib.writer.ext" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib" lines:[[[26]], [51]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.xobject" lines:[[[27]], [52]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.protocol" lines:[[50]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "qtvcp.lib.colored_formatter" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button_round" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.richtext_selector" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.basic_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.camview_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.container_widgets" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.detach_tabs" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.gcode_graphics" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.hal_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.jog_increments" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.joypad" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.led_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.nurbs_editor" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.overlay_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.simplewidgets_plugin" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.led_plugin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.hal_label_plugin" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.detach_tabs_plugin" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_progress_bar_plugin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.joypad_plugin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.nurbs_editor_plugin" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.web_widget_plugin" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.container_plugin" lines:[37, 38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.graphics_plugin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.widgets_plugin" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_led_plugin" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_label_plugin" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_label_plugin" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.actionbutton_plugin" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.dialog_plugin" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.overlay_plugin" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_slider_plugin" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_adjustment_bar_plugin" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.screenoptions_plugin" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.jogincrements_plugin" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.camview_plugin" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.toolbutton_plugin" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.versa_probe_plugin" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.basic_probe_plugin" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.tab_widget_plugin" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.virtualkeyboard_plugin" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_gauge_plugin" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.bar_plugin" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.round_gauge" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.round_progress" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.screen_options" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.simple_widgets" lines:[5, 6, 7, 8, 9, 10, 11, 12, 13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_output" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_input" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.xembed" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.radio_axis_selector" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.axis_tool_button" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.offset_tool_button" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.file_manager" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.image_switcher" lines:[21, 22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.machine_log" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.state_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.state_led" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.adjustment_bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.richtext_selector" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.status_label" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.status_slider" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.tab_widget" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.system_tool_button" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.action_tool_button" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.versa_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.virtualkeyboard" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.web_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.dro_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_line" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_history" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_touchy" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.gcode_editor" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.geditor" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.status_stacked" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.widget_switcher" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.origin_offsetview" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.tool_offsetview" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.macro_widget" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "linuxcnc" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "sys" lines:[1057] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "atexit" lines:[1058] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "subprocess" lines:[[[650], [666]], [[1067]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[[1147]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "importlib" lines:[[[[[190]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "resources" lines:[[[[[[191]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.screen_options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "importlib" lines:[[[432]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "qtvcp" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.simple_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.lib.aux_program_loader" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "sys" lines:[[1580]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "PyQt5.QtWidgets" lines:[[1581]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "qtvcp.widgets.action_button" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "sys" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "PyQt5.QtWidgets" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "sys" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "PyQt5.QtWidgets" lines:[[83]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.lib.aux_program_loader" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "sys" lines:[[390]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "PyQt5.QtWidgets" lines:[[391]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "hal" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "sys" lines:[[292]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "PyQt5.QtWidgets" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp.widgets.widget_baseclass" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "hal" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "PyQt5.QtCore" lines:[[7], [[10]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.dialogMixin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtWidgets" lines:[[459]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtCore" lines:[[460]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtGui" lines:[[461]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "qtvcp.core" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "sys" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: skipping "_thread" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.widgets.widget_baseclass" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.core" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "cv2" lines:[[45]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "sys" lines:[[572]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py: "sys" lines:[[359]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp.widgets.widget_baseclass" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.widget_baseclass" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.origin_offsetview" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.tool_offsetview" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.macro_widget" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.versa_probe" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.entry_widget" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.virtualkeyboard" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.calculator" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.machine_log" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.lib.notify" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.dialogMixin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.camview_widget" lines:[[[984]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "sys" lines:[[1925]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "PyQt5.QtWidgets" lines:[[1926]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "sys" lines:[[326]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "PyQt5.QtWidgets" lines:[[327]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "sys" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "PyQt5.QtWidgets" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.widgets.widget_baseclass" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "sys" lines:[[556]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.widgets.widget_baseclass" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.core" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.Qsci" lines:[[58]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtWidgets" lines:[[1137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtCore" lines:[[1138]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtGui" lines:[[1139]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qt5_graphics" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.widgets.widget_baseclass" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.core" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "sys" lines:[[511]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "PyQt5.QtWidgets" lines:[[512]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.gcode_editor" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.widget_baseclass" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtWidgets" lines:[[523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtCore" lines:[[524]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtGui" lines:[[525]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.widget_baseclass" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "sys" lines:[[216]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "PyQt5.QtWidgets" lines:[[217]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "sys" lines:[[375]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "PyQt5.QtWidgets" lines:[[376]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "sys" lines:[[195]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "qtvcp.widgets.widget_baseclass" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtCore" lines:[[22], [[25]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "sys" lines:[[655]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtWidgets" lines:[[656]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "sys" lines:[[242]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "PyQt5.QtWidgets" lines:[[243]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "sys" lines:[[133]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "PyQt5.QtWidgets" lines:[[134]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.entry_widget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.touchEntry" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "PyQt5" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "sys" lines:[[664]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.mdi_line" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtWidgets" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtCore" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtGui" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "sys" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: skipping "time" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.widgets.entry_widget" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.lib.aux_program_loader" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "sys" lines:[[330]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "PyQt5.QtWidgets" lines:[[331]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtWidgets" lines:[[393]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtCore" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtGui" lines:[[395]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "sys" lines:[[396]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: skipping "sys" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "gcode" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qt5_graphics" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp.core" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "sys" lines:[[202]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "PyQt5.QtWidgets" lines:[[203]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "PyQt5.QtWidgets" lines:[[516]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "sys" lines:[[387]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtWidgets" lines:[[388]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtCore" lines:[[389]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "time" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.widgets.probe_routines" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.widgets.widget_baseclass" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "sys" lines:[[64]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "PyQt5.QtWidgets" lines:[[65]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: skipping "sys" lines:[10] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "sys" lines:[[318]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "PyQt5.QtWidgets" lines:[[319]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "sys" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "PyQt5.QtWidgets" lines:[[294]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtWidgets" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtCore" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtGui" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "linuxcnc" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.xembed" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.message" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.notify" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.audio_player" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.preferences" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.machine_log" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "zmq" lines:[[[61]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "json" lines:[[[67]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[[[[[403]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.dialog_widget" lines:[[[511], [526], [536], [544], [552], [561], [580], [588], [597], [605], [613], [621], [630], [638], [646]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.overlay_widget" lines:[[[569]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.lib.aux_program_loader" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.core" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.simple_widgets" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "sys" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.widgets.led_widget" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "sys" lines:[[558]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "PyQt5.QtGui" lines:[[559]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.simple_widgets" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtWidgets" lines:[[785]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtCore" lines:[[786]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtGui" lines:[[787]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "sys" lines:[[789]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.core" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.qt_makegui" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.dialog_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "sys" lines:[[123]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "PyQt5.QtWidgets" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "PyQt5.QtWidgets" lines:[[587]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtWidgets" lines:[[268]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtCore" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtGui" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "sys" lines:[[271]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.widget_baseclass" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.dialogMixin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtWidgets" lines:[[593]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtCore" lines:[[594]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtGui" lines:[[595]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtWidgets" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtCore" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtGui" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebEngineWidgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebKitWidgets" lines:[[[[17]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.widgets.widget_baseclass" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.lib" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "PyQt5.QtWidgets" lines:[[137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "_togl" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "glnav" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "tkinter.dialog" lines:[[[209]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py: "rs274.interpret" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "rs274" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "itertools" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "glnav" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "hershey" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "gcode" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py: "gcode" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: "nf" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: skipping "sys" lines:[167] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: "configparser" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: skipping "sys" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: "stepconf" lines:[[[[221]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py: skipping "__main__" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py: "hal" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "pyvcp_widgets" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "rs274.OpenGLTk" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "hal" lines:[18, 25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "glnav" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "tkinter" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "pickle" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "nf" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "rs274.options" lines:[[13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "os" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py: "stdglue" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py: "remap" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: "qtvcp.widgets.file_manager" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "hal" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.core" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.lib.preferences" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.simple_widgets" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.simple_widgets" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.led_widget" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.widgets.dialog_widget" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.dialog_widget" lines:[11, 12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.nurbs_editor" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.toolbar_actions" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.core" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.keybindings" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.aux_program_loader" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.notify" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.dialog_widget" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.preferences" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.overlay_widget" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.tool_offsetview" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.dialog_widget" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.notify" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.geditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.status_label" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.state_led" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.bar" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.writer" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.keybindings" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcodes" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[13] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[286]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[297]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[291]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[452]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[457]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.auto_height.auto_height" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.writer" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcodes" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.aux_program_loader" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[450]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[455]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[466]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[470]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[475]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.gcode_editor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.file_manager" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.gcodes" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.action_button" lines:[5666] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.axis_tool_button" lines:[5667] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.camview_widget" lines:[5668] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.dro_widget" lines:[5669] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.file_manager" lines:[5670] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_editor" lines:[5671] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_graphics" lines:[5672] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.hal_label" lines:[5673] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.jog_increments" lines:[5674] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.led_widget" lines:[5675] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.machine_log" lines:[5676] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.mdi_history" lines:[5677] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.screen_options" lines:[5678] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.simple_widgets" lines:[5679] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_label" lines:[5680] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_slider" lines:[5681] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.system_tool_button" lines:[5682] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "hal" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.gcode_editor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.mdi_line" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.tool_offsetview" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.file_manager" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.writer" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcodes" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.simple_widgets" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[229]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[233]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[[[239]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[422]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[427]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.toolbar_actions" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "time" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial" lines:[[[[5321]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial.tools.list_ports" lines:[[[[5322]]]]: Ignore for REQ:slight shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py is not executable /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: `source [file join $::env(HALLIB_DIR) hal_procs_lib.tcl]' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: ` } else {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage is ${LINUXCNC_EMCSH-wish} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: invalid command: ${LINUXCNC_EMCSH-wish} /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: `if ([info exists env(LANG)]) {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl is ${LINUXCNC_EMCSH-emcsh} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: invalid command: ${LINUXCNC_EMCSH-emcsh} shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: /usr/scripts/rip-environment -> /usr/scripts/rip-environment (raw, not installed) shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git indexed by: /usr/bin/git -> git-core, /usr/games/git -> fakegit shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: git -> /usr/bin/git -> git-core (via contents_index_bin) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' --- find-requires-deps 2024-05-11 08:08:50.010930199 +0000 +++ filter-requires-deps 2024-05-11 08:08:50.015930170 +0000 @@ -24,3 +24,3 @@ /usr/lib/python3/site-packages -/usr/scripts/rip-environment + coreutils @@ -181,3 +181,3 @@ tk -typelib(Cairo) + typelib(GLib) find-requires: FINDPACKAGE-COMMANDS: awk basename cat clear cp cut date dirname gcc git grep head ipcrm ln lsb_release mkdir mktemp ps pylupdate5 python3 readlink rm sleep sudo tclsh touch tty uname uptime wc wish xdpyinfo Provides: python3(_hal), python3(_togl), python3(bitfile), python3(bwidget), python3(filtertest) = set:edp3, python3(flowsnake) = set:edp3, python3(gcode), python3(gladevcp), python3(gladevcp.calculatorwidget), python3(gladevcp.combi_dro), python3(gladevcp.core), python3(gladevcp.drowidget), python3(gladevcp.gladebuilder), python3(gladevcp.gtk_action), python3(gladevcp.hal_actions), python3(gladevcp.hal_bar), python3(gladevcp.hal_dial), python3(gladevcp.hal_filechooser), python3(gladevcp.hal_graph), python3(gladevcp.hal_gremlin), python3(gladevcp.hal_gremlin_plus), python3(gladevcp.hal_lightbutton), python3(gladevcp.hal_mdihistory), python3(gladevcp.hal_meter), python3(gladevcp.hal_pyngcgui), python3(gladevcp.hal_pythonplugin), python3(gladevcp.hal_sourceview), python3(gladevcp.hal_widgets), python3(gladevcp.iconview), python3(gladevcp.jogwheel), python3(gladevcp.led), python3(gladevcp.macro_widget), python3(gladevcp.makepins), python3(gladevcp.offsetpage_widget), python3(gladevcp.offsetwidget), python3(gladevcp.overridewidget), python3(gladevcp.persistence), python3(gladevcp.speedcontrol), python3(gladevcp.state_label), python3(gladevcp.status_label), python3(gladevcp.tooledit_widget), python3(gladevcp.xembed), python3(gladevcp_makepins), python3(glnav), python3(gmoccapy), python3(gmoccapy.dialogs), python3(gmoccapy.getiniinfo), python3(gmoccapy.icon_theme_helper), python3(gmoccapy.notification), python3(gmoccapy.player), python3(gmoccapy.preferences), python3(gmoccapy.widgets), python3(gremlin), python3(gremlin_view), python3(gscreen), python3(gscreen.emc_interface), python3(gscreen.keybindings), python3(gscreen.mdi), python3(gscreen.preferences), python3(hal), python3(hal_glib), python3(hershey), python3(holecircle) = set:edp3, python3(involute) = set:edp3, python3(lineardeltakins), python3(linux_event), python3(linuxcnc), python3(linuxcnc_util), python3(multifilebuilder), python3(nf), python3(panels.cam_align.cam_align_handler) = set:ed3l, python3(panels.copy.copy_handler) = set:ed3l, python3(panels.qtplasmac_sim.qtplasmac_sim_handler) = set:ed3l, python3(panels.sim_panel.sim_panel_handler) = set:ed3l, python3(panels.spindle_belts.spindle_belts_handler) = set:ed3l, python3(panels.test_button.test_button_handler) = set:ed3l, python3(panels.test_dial.test_dial_handler) = set:ed3l, python3(panels.test_led.test_led_handler) = set:ed3l, python3(panels.test_panel.test_panel_handler) = set:ed3l, python3(panels.test_probe.test_probe_handler) = set:ed3l, python3(panels.tool_dialog.tool_dialog_handler) = set:ed3l, python3(panels.versaprobe.versaprobe_handler) = set:ed3l, python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler) = set:ed3l, python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler) = set:ed3l, python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler) = set:ed3l, python3(panels.vismach_millturn.vismach_millturn_handler) = set:ed3l, python3(panels.vismach_router_atc.vismach_router_atc_handler) = set:ed3l, python3(panels.vismach_scara.vismach_scara_handler) = set:ed3l, python3(plasmac.block), python3(plasmac.bolt_circle), python3(plasmac.circle), python3(plasmac.ellipse), python3(plasmac.gusset), python3(plasmac.line), python3(plasmac.polygon), python3(plasmac.rectangle), python3(plasmac.run_from_line), python3(plasmac.sector), python3(plasmac.slot), python3(plasmac.star), python3(plasmac.triangle), python3(pncconf), python3(pncconf.build_HAL), python3(pncconf.build_INI), python3(pncconf.data), python3(pncconf.pages), python3(pncconf.private_data), python3(pncconf.tests), python3(popupkeyboard), python3(propertywindow), python3(pyhal), python3(pyngcgui), python3(pyui), python3(pyui.commands), python3(pyui.master), python3(pyui.panelui_validate), python3(pyui.widgets), python3(pyvcp_widgets), python3(qt5_graphics), python3(qtvcp), python3(qtvcp.core), python3(qtvcp.lib), python3(qtvcp.lib.audio_player), python3(qtvcp.lib.auto_height.auto_height), python3(qtvcp.lib.aux_program_loader), python3(qtvcp.lib.colored_formatter), python3(qtvcp.lib.gcode_utility), python3(qtvcp.lib.gcode_utility.facing), python3(qtvcp.lib.gcode_utility.hole_circle), python3(qtvcp.lib.gcode_utility.hole_enlarge), python3(qtvcp.lib.gcodes), python3(qtvcp.lib.keybindings), python3(qtvcp.lib.machine_log), python3(qtvcp.lib.mdi_text), python3(qtvcp.lib.message), python3(qtvcp.lib.notify), python3(qtvcp.lib.preferences), python3(qtvcp.lib.qt_ngcgui.ngcgui), python3(qtvcp.lib.qt_pdf.PDFViewer), python3(qtvcp.lib.qt_vismach), python3(qtvcp.lib.qt_vismach.fanuc_200f), python3(qtvcp.lib.qt_vismach.gantry_5axis), python3(qtvcp.lib.qt_vismach.mill_xyz), python3(qtvcp.lib.qt_vismach.millturn), python3(qtvcp.lib.qt_vismach.primitives), python3(qtvcp.lib.qt_vismach.qt_vismach), python3(qtvcp.lib.qt_vismach.scara), python3(qtvcp.lib.qtplasmac), python3(qtvcp.lib.qtplasmac.conv_block), python3(qtvcp.lib.qtplasmac.conv_bolt), python3(qtvcp.lib.qtplasmac.conv_circle), python3(qtvcp.lib.qtplasmac.conv_ellipse), python3(qtvcp.lib.qtplasmac.conv_gusset), python3(qtvcp.lib.qtplasmac.conv_line), python3(qtvcp.lib.qtplasmac.conv_polygon), python3(qtvcp.lib.qtplasmac.conv_rectangle), python3(qtvcp.lib.qtplasmac.conv_sector), python3(qtvcp.lib.qtplasmac.conv_settings), python3(qtvcp.lib.qtplasmac.conv_slot), python3(qtvcp.lib.qtplasmac.conv_star), python3(qtvcp.lib.qtplasmac.conv_triangle), python3(qtvcp.lib.qtplasmac.conversational), python3(qtvcp.lib.qtplasmac.set_offsets), python3(qtvcp.lib.qtplasmac.tooltips), python3(qtvcp.lib.qtplasmac.updater), python3(qtvcp.lib.ripper.gcode_ripper), python3(qtvcp.lib.sys_notify), python3(qtvcp.lib.toolbar_actions), python3(qtvcp.lib.touchoff_subprogram), python3(qtvcp.lib.virtual_keyboard), python3(qtvcp.lib.writer), python3(qtvcp.lib.writer.ext), python3(qtvcp.lib.writer.ext.datetime), python3(qtvcp.lib.writer.ext.find), python3(qtvcp.lib.writer.ext.table), python3(qtvcp.lib.writer.ext.wordcount), python3(qtvcp.lib.writer.writer), python3(qtvcp.lib.xembed), python3(qtvcp.logger), python3(qtvcp.plugins), python3(qtvcp.plugins.actionbutton_plugin), python3(qtvcp.plugins.bar_plugin), python3(qtvcp.plugins.basic_probe_plugin), python3(qtvcp.plugins.camview_plugin), python3(qtvcp.plugins.container_plugin), python3(qtvcp.plugins.detach_tabs_plugin), python3(qtvcp.plugins.dialog_plugin), python3(qtvcp.plugins.graphics_plugin), python3(qtvcp.plugins.hal_label_plugin), python3(qtvcp.plugins.jogincrements_plugin), python3(qtvcp.plugins.joypad_plugin), python3(qtvcp.plugins.led_plugin), python3(qtvcp.plugins.nurbs_editor_plugin), python3(qtvcp.plugins.overlay_plugin), python3(qtvcp.plugins.qtvcp_plugin), python3(qtvcp.plugins.round_gauge_plugin), python3(qtvcp.plugins.round_progress_bar_plugin), python3(qtvcp.plugins.screenoptions_plugin), python3(qtvcp.plugins.simplewidgets_plugin), python3(qtvcp.plugins.state_label_plugin), python3(qtvcp.plugins.state_led_plugin), python3(qtvcp.plugins.status_adjustment_bar_plugin), python3(qtvcp.plugins.status_label_plugin), python3(qtvcp.plugins.status_slider_plugin), python3(qtvcp.plugins.tab_widget_plugin), python3(qtvcp.plugins.toolbutton_plugin), python3(qtvcp.plugins.versa_probe_plugin), python3(qtvcp.plugins.virtualkeyboard_plugin), python3(qtvcp.plugins.web_widget_plugin), python3(qtvcp.plugins.widgets_plugin), python3(qtvcp.qt_action), python3(qtvcp.qt_istat), python3(qtvcp.qt_makegui), python3(qtvcp.qt_makepins), python3(qtvcp.qt_pstat), python3(qtvcp.qt_tstat), python3(qtvcp.qtvcp_handler), python3(qtvcp.widgets), python3(qtvcp.widgets.action_button), python3(qtvcp.widgets.action_button_round), python3(qtvcp.widgets.action_tool_button), python3(qtvcp.widgets.adjustment_bar), python3(qtvcp.widgets.axis_tool_button), python3(qtvcp.widgets.bar), python3(qtvcp.widgets.basic_probe), python3(qtvcp.widgets.calculator), python3(qtvcp.widgets.camview_widget), python3(qtvcp.widgets.container_widgets), python3(qtvcp.widgets.detach_tabs), python3(qtvcp.widgets.dialogMixin), python3(qtvcp.widgets.dialog_widget), python3(qtvcp.widgets.dro_widget), python3(qtvcp.widgets.entry_widget), python3(qtvcp.widgets.fake_status), python3(qtvcp.widgets.file_manager), python3(qtvcp.widgets.gcode_editor), python3(qtvcp.widgets.gcode_graphics), python3(qtvcp.widgets.geditor), python3(qtvcp.widgets.general_hal_input), python3(qtvcp.widgets.general_hal_output), python3(qtvcp.widgets.hal_label), python3(qtvcp.widgets.hal_selectionbox), python3(qtvcp.widgets.image_switcher), python3(qtvcp.widgets.jog_increments), python3(qtvcp.widgets.joypad), python3(qtvcp.widgets.led_widget), python3(qtvcp.widgets.machine_log), python3(qtvcp.widgets.macro_widget), python3(qtvcp.widgets.mdi_history), python3(qtvcp.widgets.mdi_line), python3(qtvcp.widgets.mdi_touchy), python3(qtvcp.widgets.nurbs_editor), python3(qtvcp.widgets.offset_tool_button), python3(qtvcp.widgets.origin_offsetview), python3(qtvcp.widgets.overlay_widget), python3(qtvcp.widgets.probe_routines), python3(qtvcp.widgets.probe_subprog), python3(qtvcp.widgets.qtvcp_icons), python3(qtvcp.widgets.radio_axis_selector), python3(qtvcp.widgets.richtext_selector), python3(qtvcp.widgets.round_gauge), python3(qtvcp.widgets.round_progress), python3(qtvcp.widgets.runFromLine_dialog), python3(qtvcp.widgets.screen_options), python3(qtvcp.widgets.simple_widgets), python3(qtvcp.widgets.state_label), python3(qtvcp.widgets.state_led), python3(qtvcp.widgets.status_label), python3(qtvcp.widgets.status_slider), python3(qtvcp.widgets.status_stacked), python3(qtvcp.widgets.stylesheeteditor), python3(qtvcp.widgets.system_tool_button), python3(qtvcp.widgets.tab_widget), python3(qtvcp.widgets.tool_offsetview), python3(qtvcp.widgets.touchEntry), python3(qtvcp.widgets.versa_probe), python3(qtvcp.widgets.virtualkeyboard), python3(qtvcp.widgets.web_widget), python3(qtvcp.widgets.widget_baseclass), python3(qtvcp.widgets.widget_switcher), python3(qtvcp.widgets.xembed), python3(rotarydeltakins), python3(rs274), python3(rs274.OpenGLTk), python3(rs274.author), python3(rs274.glcanon), python3(rs274.interpret), python3(rs274.options), python3(screens.blender.blender_handler) = set:ed3l, python3(screens.qt_cnc.qt_cnc_handler) = set:ed3l, python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler) = set:ed3l, python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler) = set:ed3l, python3(screens.qtaxis.qtaxis_handler) = set:ed3l, python3(screens.qtdragon.qtdragon_handler) = set:ed3l, python3(screens.qtdragon_hd.qtdragon_hd_handler) = set:ed3l, python3(screens.qtlathe.qtlathe_handler) = set:ed3l, python3(screens.qtplasmac.languages.qtplasmac) = set:ed3l, python3(screens.qtplasmac.qtplasmac_handler) = set:ed3l, python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler) = set:ed3l, python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler) = set:ed3l, python3(screens.qttouchy.qttouchy_handler) = set:ed3l, python3(screens.tester.tester_handler) = set:ed3l, python3(screens.woodpecker.woodpecker_handler) = set:ed3l, python3(screens.x1mill.x1mill_handler) = set:ed3l, python3(stepconf), python3(stepconf.build_HAL), python3(stepconf.build_INI), python3(stepconf.import_mach), python3(stepconf.pages), python3(tooldb), python3(touchy), python3(touchy.emc_interface), python3(touchy.filechooser), python3(touchy.hal_interface), python3(touchy.listing), python3(touchy.mdi), python3(touchy.preferences), python3(vcpparse), python3(vismach), tcl(Hal), tcl(Hal)-1 = 1.0, tcl(Linuxcnc), tcl(Linuxcnc)-1 = 1.0, tcl(Ngcgui), tcl(Ngcgui)-1 = 1.0, tcl(Ngcguittt), tcl(Ngcguittt)-1 = 1.0 Requires: liblinuxcnc = 2.9.2-alt4.20240203, libGLU, python3-module-PyQt5-devel, libgtksourceview3-gir, libX11-devel, tclx, tcl-blt, python3(Xlib) < 0, python3(PyQt5.Qsci) < 0, /bin/bash, /bin/sh, /lib/ld-linux.so.2, /lib/udev/rules.d, /usr/bin/env, /usr/bin/python3, /usr/bin/python3.12, /usr/bin/tclsh, /usr/bin/tclsh8.6, /usr/bin/wish, /usr/bin/wish8.6, /usr/lib/python3/site-packages, coreutils, gawk, gcc-common, git-core, grep, libX11.so.6 >= set:oja5r3qabUpLHlTcdkK7Ymnta6aWUK6qURI2aereyuySbaY9Y9rRf80, libXinerama.so.1 >= set:hfyH4K6, libXmu.so.6 >= set:lktel, libboost_python312.so.1.85.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.2.3), libc.so.6(GLIBC_2.27), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.7), libc.so.6(GLIBC_2.8), libcairo.so.2 >= set:miBeiC9UuDqAUQ1bepgkhH08f6m87ljhFbj6, libepoxy.so.0 >= set:plG6OtaOh21hPpoEbYgihHZ0wsB7PrHp7He0, libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgdk-3.so.0 >= set:nkZ5ndiwLew01gu7UA, libgdk-x11-2.0.so.0 >= set:njH9A3kDQ0iQRBflIP1zlE5TpwDZsPmjGbQ, libglib-2.0.so.0 >= set:olyg8bKheHPr7MU1, libgobject-2.0.so.0 >= set:mjQCdZlc930HMK1, libgtk-3.so.0 >= set:qjjZoCF3lFXh6tMGe5LNfHjmYeZBthRtN41TeIZzjgwWOrHiSh2NZBTl9RaGCZcaZtsSDoklAfoY3jZqdwNTjVxluts4fzptNZoObnMXHUBHYRt39LkeFCpeX0XGSNmA8AjwtwC5hgzieP0K2oI8aJb3kDhZ4iVp7IxwWvgRbyDTqaJhAOTD2Fv8g9yPZ6NOuGRIGtqP9FiPwZfRTshMUVUTNtViaQgX5ndOGrJMiFzxXDm6AW3HZBRN91ZxbqL4uj5Pt3embDjf1R8JsH7xQTCBVCxMfYTOJIZFI9ZbiGb6GLX0FyKvWxZH06khJ56lr41PV7VxkpV7CX5AN30dAgkjASU69WAU20ZKQEW5CdLKnYV6PQaWR9Q2d4, libgtk-x11-2.0.so.0 >= set:pijZofB1Sac1HWm6UJI4cT7ZgTZ5cu7LyBFNQFMTkKvPsM6syJWtgE6gCt8VZC2002Yr6O3qpMKORxMYFpGbygZwTFmPjEBmkFK5tZ9puR8V4nvNqcMb9Q8ET5Z5nwuEj7uZbKfI69aHIIc6AKSdSXr1KNVy75UzoI60weGwIZrr62BMCZ1BOfXpj2M6ZjtlXi25ghyZccTXY7GXsFuvoeSJ3yKQFbX9A7iCzUEYa6aZ04fAonLTJJ2yQZ7HcxVrWamaKGUdBx8Y99PalB5dPYDzTFF762xI20, liblinuxcnchal.so.0 >= set:kdPx99okMC0Dz1625MawlIfquO3JZ3ZIUi5Jl7M43uZ4jrJfiRqxZ2hezaWOwqo8jNxXb4PXA5GbMGAP8gNN7e5Z7F9EPZhr3lvZ8aQw6VY2Cu2agoAmBmnw7UQIPmWiMLuqjUJnhudWalGzhjgU7, liblinuxcncini.so.0 >= set:jf3pACnRkFYa1jK9dmLdZcAMQZdkP4S54W3, libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libmodbus.so.5 >= set:kf4sxmJBcjkoYXJ6nZ8w1f3UAmWo529bNQO9HdZ6GfYWQgMVJKZenaurI1UX4, libnml.so.0 >= set:nhHZFI3kBS0Ma7l8Tbc7NDAj0cVe7YpJAecK8HiAlVmUFIacmYZAgNKb7AgZ9o3YcwI77x8lKghWwBp3R3aHXufreVgSJOcHDIMmg3FTiWGgZDSqajrVXGCmzmwK9kEnrrZAXgB, libpango-1.0.so.0 >= set:miqUTrpg55DU675j31iPjU59gVL2, libpangocairo-1.0.so.0 >= set:jiZ1Z0, libposemath.so.0 >= set:mhNqbLmit1h1SKAkf3R8yKzITkH51qlNb2mXMvLIbzYdLSZ1Pn3dvFo360T4Ym3VUZ06J9T65VCYVK5, libpyplugin.so.0 >= set:ifB9gZhMHZs51, libpython3.12.so.1.0 >= set:oipCiruqzTeZzb6nQEDgYmcycRwVJdbZ5iXKYZiJODaguD1Z09heVWM4C62R9XS3UbkznKwtFB0v3EX8wxJskhoMjZnQOps91h0gXMB2zZ0ZiESnuTSI6RauE3xO1AePZyWlNaBQhCb27NyC2QiQiNF0zEU1FA9BQnlAid, libreadline.so.8 >= set:njCJKlFcmgU8mvL3SqZmyq3ZFmIppb, librs274.so.0 >= set:oklu8nstiJF4gERvmYKLZu2B25LRi2g8GwakLmkAhIVMce, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.14), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.20), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtk8.6.so >= set:mh48jtZxaNUhMsSfBJ4AXC6RIwDmyqFM8nd9l1ee9PQ0ud0, libtooldata.so.0 >= set:ieCH2SkPFzG4BeSHWNfZwfGC1oYUwSluc7, libudev.so.1 >= set:kgKhqJ5KQ3IrBeCbBEkBBomRh1RpLFAx211, libudev.so.1(LIBUDEV_183), libusb-1.0.so.0 >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu, lsb-release, procps, python3, python3(OpenGL) < 0, python3(OpenGL.GL) < 0, python3(OpenGL.GLU) < 0, python3(OpenGL.raw.GLX._types) < 0, python3(PyQt5) < 0, python3(PyQt5.QtCore) < 0, python3(PyQt5.QtDesigner) < 0, python3(PyQt5.QtGui) < 0, python3(PyQt5.QtPrintSupport) < 0, python3(PyQt5.QtWidgets) < 0, python3(__future__) < 0, python3(array) < 0, python3(binascii) < 0, python3(cairo) < 0, python3(collections) < 0, python3(configobj) < 0, python3(configparser) < 0, python3(copy) < 0, python3(ctypes) < 0, python3(datetime) < 0, python3(dbus) < 0, python3(decimal) < 0, python3(enum) < 0, python3(fcntl) < 0, python3(fnmatch) < 0, python3(functools) < 0, python3(getopt) < 0, python3(gettext) < 0, python3(gi) < 0, python3(gi.repository) < 0, python3(glob) < 0, python3(hashlib) < 0, python3(importlib) < 0, python3(inspect) < 0, python3(json) < 0, python3(locale) < 0, python3(logging) < 0, python3(math) < 0, python3(mimetypes) < 0, python3(numpy) < 0, python3(numpy.core) < 0, python3(operator) < 0, python3(optparse) < 0, python3(os) < 0, python3(pickle) < 0, python3(random) < 0, python3(re) < 0, python3(readline) < 0, python3(select) < 0, python3(serial) < 0, python3(shutil) < 0, python3(signal) < 0, python3(socket) < 0, python3(string) < 0, python3(struct) < 0, python3(subprocess) < 0, python3(tarfile) < 0, python3(tempfile) < 0, python3(textwrap) < 0, python3(threading) < 0, python3(tkinter) < 0, python3(traceback) < 0, python3(types) < 0, python3(uuid) < 0, python3(validate) < 0, python3(warnings) < 0, python3(webbrowser) < 0, python3(xml.dom.minidom) < 0, python3(xml.etree.ElementPath) < 0, python3(xml.etree.ElementTree) < 0, python3(yapps) < 0, python3.12-ABI, rtld(GNU_HASH), sudo, tcl, tcl(BWidget), tcl(Tk), tcl(Tk)-8 >= 8.0, termutils, tk, typelib(GLib), typelib(GObject), typelib(Gdk), typelib(GdkPixbuf), typelib(GdkX11), typelib(Gio), typelib(Gst), typelib(Gtk), typelib(GtkSource), typelib(Notify), typelib(Pango), typelib(PangoCairo), typelib(Vte), util-linux, xdpyinfo Requires(rpmlib): rpmlib(SetVersions) Obsoletes: linuxcnc-data <= 2.9.2-alt4.20240203 Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.rZ05tg Creating linuxcnc-debuginfo package Processing files: liblinuxcnc-devel-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.miQZ2o find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.XvXG2X find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/modal_state.hh:25:10: fatal error: vector: No such file or directory 25 | #include | ^~~~~~~~ compilation terminated. cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh: cpp failed, trying c++ mode /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh: cpp failed /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh:19:10: fatal error: rpc/rpc.h: No such file or directory 19 | #include /* struct XDR */ | ^~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h:24: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h:20: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h:34: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h:33: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h:40: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h: cpp failed In file included from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/object_fwd.hpp:8, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh:27: /usr/include/boost/python/detail/wrap_python.hpp:57:11: fatal error: pyconfig.h: No such file or directory 57 | # include | ^~~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh: cpp failed ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.2-alt4.20240203, /usr/lib/liblinuxcnchal.so.0, /usr/lib/liblinuxcncini.so.0, /usr/lib/libnml.so.0, /usr/lib/libposemath.so.0, /usr/lib/libpyplugin.so.0, /usr/lib/librs274.so.0, /usr/lib/libtooldata.so.0, boost-devel-headers Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.BJ8Fyv Processing files: liblinuxcnc-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.khZx2P find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0: 119 symbols, 17 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcncini.so.0: 35 symbols, 16 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libnml.so.0: 836 symbols, 20 bpp warning: hash collision: _ZN3NML12format_inputEP6NMLmsg count_characters_in_print_list lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libposemath.so.0: 415 symbols, 19 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libpyplugin.so.0: 23 symbols, 15 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/librs274.so.0: 2001 symbols, 21 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libtooldata.so.0: 21 symbols, 15 bpp Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.PqM6Ad find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: liblinuxcnchal.so.0 = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2, liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0asicGtuLE4gybs3y3xrdiX5sUZF8fYcJwt5n6cHwC9uugXsgXzIEqrO1, libnml.so.0 = set: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, libposemath.so.0 = set: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, libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxifLv4LPqR15xNTYNE5, librs274.so.0 = set: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, libtooldata.so.0 = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Requires: libboost_python312.so.1.85.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNMTMqzp5SpoxPKmKTnJQMFAsJFEsRmPay8ShKyIWTYmDlS1gvFDLHEZsgr00wZHvnfuR7cmY40PURuzx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.9), libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_4.0.0), libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libpython3.12.so.1.0 >= set:oi0GOBAUI3x9Zm2hWASt1vZ3R4nYYfA4VAH3joq8Yna2GUTvbSg3QBmBWdwKz06SOh5x1fxZEHbvodwVQDokPlMCfIgsrE3xO1AuPv374qZiTjyQZcRdeSUEtPaaoPfwkCRbdyfJ0, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.5), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.18), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.26), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtirpc.so.3 >= set:miLQRMTfkMBlyKlAtNseOZekznKvK3HZEZCwnOh, libtirpc.so.3(TIRPC_0.3.0), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.XwSHeZ Creating liblinuxcnc-debuginfo package Processing files: linuxcnc-debuginfo-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.AFqJk1 find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.aq3UAz find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.2-alt4.20240203, /usr/lib/debug/lib/ld-linux.so.2.debug, debug(libX11.so.6), debug(libXinerama.so.1), debug(libXmu.so.6), debug(libboost_python312.so.1.85.0), debug(libc.so.6), debug(libcairo.so.2), debug(libepoxy.so.0), debug(libgcc_s.so.1), debug(libgdk-3.so.0), debug(libgdk-x11-2.0.so.0), debug(libglib-2.0.so.0), debug(libgobject-2.0.so.0), debug(libgtk-3.so.0), debug(libgtk-x11-2.0.so.0), debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libm.so.6), debug(libmodbus.so.5), debug(libnml.so.0), debug(libpango-1.0.so.0), debug(libpangocairo-1.0.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(libpython3.12.so.1.0), debug(libreadline.so.8), debug(librs274.so.0), debug(libstdc++.so.6), debug(libtk8.6.so), debug(libtooldata.so.0), debug(libudev.so.1), debug(libusb-1.0.so.0) Processing files: liblinuxcnc-debuginfo-2.9.2-alt4.20240203 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.hJANYa find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.AJClyy find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libnml.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(librs274.so.0), debug(libtooldata.so.0) Requires: liblinuxcnc = 2.9.2-alt4.20240203, debug(libboost_python312.so.1.85.0), debug(libc.so.6), debug(libgcc_s.so.1), debug(libm.so.6), debug(libpython3.12.so.1.0), debug(libstdc++.so.6), debug(libtirpc.so.3) Adding to liblinuxcnc-devel a strict dependency on linuxcnc Adding to linuxcnc a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on linuxcnc Adding to liblinuxcnc-debuginfo a strict dependency on liblinuxcnc Adding to liblinuxcnc-devel a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on liblinuxcnc-debuginfo Removing from linuxcnc-debuginfo 47 sources provided by liblinuxcnc-debuginfo also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/emc/pythonplugin also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/cms also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/linklist also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/nml also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/os_intf also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/posemath also prunning dir /usr/src/debug/linuxcnc-2.9.2/src/libnml/rcs Removing 7 extra deps from linuxcnc due to dependency on liblinuxcnc Removing 7 extra deps from liblinuxcnc-devel due to dependency on liblinuxcnc Removing 7 extra deps from linuxcnc-debuginfo due to dependency on liblinuxcnc-debuginfo Removing 1 extra deps from liblinuxcnc-devel due to repentancy on linuxcnc Removing 31 extra deps from linuxcnc due to repentancy on liblinuxcnc Removing 6 extra deps from linuxcnc-debuginfo due to repentancy on liblinuxcnc-debuginfo Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-2.9.2-alt4.20240203.i586.rpm (w2T8.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-devel-2.9.2-alt4.20240203.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-2.9.2-alt4.20240203.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm (w2T8.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm (w2T8.xzdio) 416.33user 95.22system 5:54.98elapsed 144%CPU (0avgtext+0avgdata 418264maxresident)k 0inputs+0outputs (0major+23367065minor)pagefaults 0swaps 10.33user 3.21system 7:40.82elapsed 2%CPU (0avgtext+0avgdata 127032maxresident)k 15480inputs+0outputs (0major+382890minor)pagefaults 0swaps --- liblinuxcnc-2.9.2-alt4.20240203.i586.rpm.repo 2024-04-26 18:47:43.000000000 +0000 +++ liblinuxcnc-2.9.2-alt4.20240203.i586.rpm.hasher 2024-05-11 08:10:05.941487749 +0000 @@ -7,3 +7,3 @@ /usr/lib/libtooldata.so.0 100644 root:root -Requires: libboost_python312.so.1.84.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNuojQRqzp5SpoxPKmKTnJQ2USkkKqHp5h4X8nhmZbVJeHI3ENEULfvnhZ91wcZ0CZvtZ8nZ1cmY40zffx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60 +Requires: libboost_python312.so.1.85.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNMTMqzp5SpoxPKmKTnJQMFAsJFEsRmPay8ShKyIWTYmDlS1gvFDLHEZsgr00wZHvnfuR7cmY40PURuzx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60 Requires: rpmlib(SetVersions) @@ -50,16 +50,16 @@ Provides: liblinuxcnchal.so.0 = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2 -Provides: liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0QglXYuh9w4nU6472TqASbUMZzhuUpq1XaKcom1djYYwSVwS7phRSmhfo +Provides: liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0asicGtuLE4gybs3y3xrdiX5sUZF8fYcJwt5n6cHwC9uugXsgXzIEqrO1 Provides: libnml.so.0 = set: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 Provides: libposemath.so.0 = set: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 -Provides: libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxAjT5GzcsH3a2zLVzhb -Provides: librs274.so.0 = set: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 +Provides: libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxifLv4LPqR15xNTYNE5 +Provides: librs274.so.0 = set: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 Provides: libtooldata.so.0 = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Provides: liblinuxcnc = 2.9.2-alt4.20240203:sisyphus+345892.200.2.1 -File: /usr/lib/liblinuxcnchal.so.0 100644 root:root b65b4b12aa98b40f5f626034a39fafad -File: /usr/lib/liblinuxcncini.so.0 100644 root:root 42026267d7baccfabd3db887b091f0d3 -File: /usr/lib/libnml.so.0 100644 root:root 210990e7827548c23a36ad387c977a9d -File: /usr/lib/libposemath.so.0 100644 root:root 86e74ba8813a93e5dc0af8e131d16963 -File: /usr/lib/libpyplugin.so.0 100644 root:root edfec8e51937c8c280c3a5d7d7b87ff7 -File: /usr/lib/librs274.so.0 100644 root:root be4e64fdf93e43d1645141407e5cfae2 -File: /usr/lib/libtooldata.so.0 100644 root:root f595cb135a85ebffb30f936d82a18c54 -RPMIdentity: db41edc784384f063bdebcacb892f27cd665128332f35fc6d1f1af6cf2a187122c51e8f0774f31619558970b471f5d0953151884e760f87bee5d6f4c096a2fa2 +File: /usr/lib/liblinuxcnchal.so.0 100644 root:root 8f74713da20e8171ca51006392a9dabf +File: /usr/lib/liblinuxcncini.so.0 100644 root:root a39d9a8fcf4efb793af61e4b02f92736 +File: /usr/lib/libnml.so.0 100644 root:root f3d9180b9249dc779ec08eee8b748214 +File: /usr/lib/libposemath.so.0 100644 root:root d7ec34a9f0d9af1d5d267ab4c045f3d3 +File: /usr/lib/libpyplugin.so.0 100644 root:root bdb08b783f8e5a715d3a1697b274e7e2 +File: /usr/lib/librs274.so.0 100644 root:root f7385f270558cf2189f9a9e408333e8a +File: /usr/lib/libtooldata.so.0 100644 root:root 65c447bd7c22dbe8ec4e9418a51d78b6 +RPMIdentity: 796c58d7bad45346edbab2c5192b0654120ede1d245bae25361205d5b4218aa38831eeab9fa0c165879521863d1b3d07902149e4d0c595bd0ba4e18678fe67aa --- liblinuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm.repo 2024-04-26 18:47:43.000000000 +0000 +++ liblinuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm.hasher 2024-05-11 08:10:06.099486828 +0000 @@ -1,22 +1,22 @@ -/usr/lib/debug/.build-id/0d 40755 root:root -/usr/lib/debug/.build-id/0d/e172c7c22ce5f2e1c45590eb05e00b45305a4b 120777 root:root ../../../librs274.so.0 -/usr/lib/debug/.build-id/0d/e172c7c22ce5f2e1c45590eb05e00b45305a4b.debug 120777 root:root ../../usr/lib/librs274.so.0.debug -/usr/lib/debug/.build-id/29 40755 root:root -/usr/lib/debug/.build-id/29/62cd1a38c263a19a71ee7bd1bbb70e517f900b 120777 root:root ../../../libtooldata.so.0 -/usr/lib/debug/.build-id/29/62cd1a38c263a19a71ee7bd1bbb70e517f900b.debug 120777 root:root ../../usr/lib/libtooldata.so.0.debug -/usr/lib/debug/.build-id/6b 40755 root:root -/usr/lib/debug/.build-id/6b/2fa072c4abb03885cd176147969580d5807aba 120777 root:root ../../../libnml.so.0 -/usr/lib/debug/.build-id/6b/2fa072c4abb03885cd176147969580d5807aba.debug 120777 root:root ../../usr/lib/libnml.so.0.debug -/usr/lib/debug/.build-id/b3 40755 root:root -/usr/lib/debug/.build-id/b3/9d7d0eefefca4d3b833364124ad28997669fed 120777 root:root ../../../liblinuxcncini.so.0 -/usr/lib/debug/.build-id/b3/9d7d0eefefca4d3b833364124ad28997669fed.debug 120777 root:root ../../usr/lib/liblinuxcncini.so.0.debug -/usr/lib/debug/.build-id/c1 40755 root:root -/usr/lib/debug/.build-id/c1/263377a1b0372d1ccf9b597d07e5bd88344f10 120777 root:root ../../../liblinuxcnchal.so.0 -/usr/lib/debug/.build-id/c1/263377a1b0372d1ccf9b597d07e5bd88344f10.debug 120777 root:root ../../usr/lib/liblinuxcnchal.so.0.debug -/usr/lib/debug/.build-id/f5 40755 root:root -/usr/lib/debug/.build-id/f5/6c89735c3bdb4d7b19ee677a3db66522e300d2 120777 root:root ../../../libposemath.so.0 -/usr/lib/debug/.build-id/f5/6c89735c3bdb4d7b19ee677a3db66522e300d2.debug 120777 root:root ../../usr/lib/libposemath.so.0.debug -/usr/lib/debug/.build-id/fc 40755 root:root -/usr/lib/debug/.build-id/fc/5b0f61ff7448ac727cac567da847aac3c32688 120777 root:root ../../../libpyplugin.so.0 -/usr/lib/debug/.build-id/fc/5b0f61ff7448ac727cac567da847aac3c32688.debug 120777 root:root ../../usr/lib/libpyplugin.so.0.debug +/usr/lib/debug/.build-id/17 40755 root:root +/usr/lib/debug/.build-id/17/0afe68da4953f53d25aed9632ab2d7e69d2597 120777 root:root ../../../libnml.so.0 +/usr/lib/debug/.build-id/17/0afe68da4953f53d25aed9632ab2d7e69d2597.debug 120777 root:root ../../usr/lib/libnml.so.0.debug +/usr/lib/debug/.build-id/23 40755 root:root +/usr/lib/debug/.build-id/23/6fafd149473f79f63434a82d5c73856d6befc4 120777 root:root ../../../libposemath.so.0 +/usr/lib/debug/.build-id/23/6fafd149473f79f63434a82d5c73856d6befc4.debug 120777 root:root ../../usr/lib/libposemath.so.0.debug +/usr/lib/debug/.build-id/2e 40755 root:root +/usr/lib/debug/.build-id/2e/9d218bdcc1b4fbff0832da9ef22ec3e0a0e339 120777 root:root ../../../liblinuxcnchal.so.0 +/usr/lib/debug/.build-id/2e/9d218bdcc1b4fbff0832da9ef22ec3e0a0e339.debug 120777 root:root ../../usr/lib/liblinuxcnchal.so.0.debug +/usr/lib/debug/.build-id/5e 40755 root:root +/usr/lib/debug/.build-id/5e/56d4b23a022fafab30387a4c09e29ad18bbdc0 120777 root:root ../../../liblinuxcncini.so.0 +/usr/lib/debug/.build-id/5e/56d4b23a022fafab30387a4c09e29ad18bbdc0.debug 120777 root:root ../../usr/lib/liblinuxcncini.so.0.debug +/usr/lib/debug/.build-id/77 40755 root:root +/usr/lib/debug/.build-id/77/31773c7ca9bebc42afd00ef50b29cae996c37e 120777 root:root ../../../libpyplugin.so.0 +/usr/lib/debug/.build-id/77/31773c7ca9bebc42afd00ef50b29cae996c37e.debug 120777 root:root ../../usr/lib/libpyplugin.so.0.debug +/usr/lib/debug/.build-id/7b 40755 root:root +/usr/lib/debug/.build-id/7b/b1003c7293a492bc52063f1b075a2a3977dc01 120777 root:root ../../../libtooldata.so.0 +/usr/lib/debug/.build-id/7b/b1003c7293a492bc52063f1b075a2a3977dc01.debug 120777 root:root ../../usr/lib/libtooldata.so.0.debug +/usr/lib/debug/.build-id/98 40755 root:root +/usr/lib/debug/.build-id/98/d611ae0e6be2e96a44130c64d536a43fae7375 120777 root:root ../../../librs274.so.0 +/usr/lib/debug/.build-id/98/d611ae0e6be2e96a44130c64d536a43fae7375.debug 120777 root:root ../../usr/lib/librs274.so.0.debug /usr/lib/debug/usr/lib/liblinuxcnchal.so.0.debug 100644 root:root @@ -197,3 +197,3 @@ /usr/src/debug/linuxcnc-2.9.2/src/rtapi/uspace_ulapi.c 100644 root:root -Requires: debug(libboost_python312.so.1.84.0) +Requires: debug(libboost_python312.so.1.85.0) Requires: debug(libc.so.6) @@ -214,30 +214,30 @@ Provides: liblinuxcnc-debuginfo = 2.9.2-alt4.20240203:sisyphus+345892.200.2.1 -File: /usr/lib/debug/.build-id/0d 40755 root:root -File: /usr/lib/debug/.build-id/0d/e172c7c22ce5f2e1c45590eb05e00b45305a4b 120777 root:root ../../../librs274.so.0 -File: /usr/lib/debug/.build-id/0d/e172c7c22ce5f2e1c45590eb05e00b45305a4b.debug 120777 root:root ../../usr/lib/librs274.so.0.debug -File: /usr/lib/debug/.build-id/29 40755 root:root -File: /usr/lib/debug/.build-id/29/62cd1a38c263a19a71ee7bd1bbb70e517f900b 120777 root:root ../../../libtooldata.so.0 -File: /usr/lib/debug/.build-id/29/62cd1a38c263a19a71ee7bd1bbb70e517f900b.debug 120777 root:root ../../usr/lib/libtooldata.so.0.debug -File: /usr/lib/debug/.build-id/6b 40755 root:root -File: /usr/lib/debug/.build-id/6b/2fa072c4abb03885cd176147969580d5807aba 120777 root:root ../../../libnml.so.0 -File: /usr/lib/debug/.build-id/6b/2fa072c4abb03885cd176147969580d5807aba.debug 120777 root:root ../../usr/lib/libnml.so.0.debug -File: /usr/lib/debug/.build-id/b3 40755 root:root -File: /usr/lib/debug/.build-id/b3/9d7d0eefefca4d3b833364124ad28997669fed 120777 root:root ../../../liblinuxcncini.so.0 -File: /usr/lib/debug/.build-id/b3/9d7d0eefefca4d3b833364124ad28997669fed.debug 120777 root:root ../../usr/lib/liblinuxcncini.so.0.debug -File: /usr/lib/debug/.build-id/c1 40755 root:root -File: /usr/lib/debug/.build-id/c1/263377a1b0372d1ccf9b597d07e5bd88344f10 120777 root:root ../../../liblinuxcnchal.so.0 -File: /usr/lib/debug/.build-id/c1/263377a1b0372d1ccf9b597d07e5bd88344f10.debug 120777 root:root ../../usr/lib/liblinuxcnchal.so.0.debug -File: /usr/lib/debug/.build-id/f5 40755 root:root -File: /usr/lib/debug/.build-id/f5/6c89735c3bdb4d7b19ee677a3db66522e300d2 120777 root:root ../../../libposemath.so.0 -File: /usr/lib/debug/.build-id/f5/6c89735c3bdb4d7b19ee677a3db66522e300d2.debug 120777 root:root ../../usr/lib/libposemath.so.0.debug -File: /usr/lib/debug/.build-id/fc 40755 root:root -File: /usr/lib/debug/.build-id/fc/5b0f61ff7448ac727cac567da847aac3c32688 120777 root:root ../../../libpyplugin.so.0 -File: /usr/lib/debug/.build-id/fc/5b0f61ff7448ac727cac567da847aac3c32688.debug 120777 root:root ../../usr/lib/libpyplugin.so.0.debug -File: /usr/lib/debug/usr/lib/liblinuxcnchal.so.0.debug 100644 root:root b62d7a651d4198ca9c81902e43b20b4c -File: /usr/lib/debug/usr/lib/liblinuxcncini.so.0.debug 100644 root:root 5785a89bdb5dba8e318a1ea694726f71 -File: /usr/lib/debug/usr/lib/libnml.so.0.debug 100644 root:root d8eae0fd81ad2d6655673c288427db6f -File: /usr/lib/debug/usr/lib/libposemath.so.0.debug 100644 root:root ebe0ad10e471d7f9d29a4b1d00ea64dd -File: /usr/lib/debug/usr/lib/libpyplugin.so.0.debug 100644 root:root 985d97fb4e514a3ef254772f91586de2 -File: /usr/lib/debug/usr/lib/librs274.so.0.debug 100644 root:root 1814c73309757f0405a07bb881a9338e -File: /usr/lib/debug/usr/lib/libtooldata.so.0.debug 100644 root:root 6e3b2eb59e012477a2e9ecb16c49a14b +File: /usr/lib/debug/.build-id/17 40755 root:root +File: /usr/lib/debug/.build-id/17/0afe68da4953f53d25aed9632ab2d7e69d2597 120777 root:root ../../../libnml.so.0 +File: /usr/lib/debug/.build-id/17/0afe68da4953f53d25aed9632ab2d7e69d2597.debug 120777 root:root ../../usr/lib/libnml.so.0.debug +File: /usr/lib/debug/.build-id/23 40755 root:root +File: /usr/lib/debug/.build-id/23/6fafd149473f79f63434a82d5c73856d6befc4 120777 root:root ../../../libposemath.so.0 +File: /usr/lib/debug/.build-id/23/6fafd149473f79f63434a82d5c73856d6befc4.debug 120777 root:root ../../usr/lib/libposemath.so.0.debug +File: /usr/lib/debug/.build-id/2e 40755 root:root +File: /usr/lib/debug/.build-id/2e/9d218bdcc1b4fbff0832da9ef22ec3e0a0e339 120777 root:root ../../../liblinuxcnchal.so.0 +File: /usr/lib/debug/.build-id/2e/9d218bdcc1b4fbff0832da9ef22ec3e0a0e339.debug 120777 root:root ../../usr/lib/liblinuxcnchal.so.0.debug +File: /usr/lib/debug/.build-id/5e 40755 root:root +File: /usr/lib/debug/.build-id/5e/56d4b23a022fafab30387a4c09e29ad18bbdc0 120777 root:root ../../../liblinuxcncini.so.0 +File: /usr/lib/debug/.build-id/5e/56d4b23a022fafab30387a4c09e29ad18bbdc0.debug 120777 root:root ../../usr/lib/liblinuxcncini.so.0.debug +File: /usr/lib/debug/.build-id/77 40755 root:root +File: /usr/lib/debug/.build-id/77/31773c7ca9bebc42afd00ef50b29cae996c37e 120777 root:root ../../../libpyplugin.so.0 +File: /usr/lib/debug/.build-id/77/31773c7ca9bebc42afd00ef50b29cae996c37e.debug 120777 root:root ../../usr/lib/libpyplugin.so.0.debug +File: /usr/lib/debug/.build-id/7b 40755 root:root +File: /usr/lib/debug/.build-id/7b/b1003c7293a492bc52063f1b075a2a3977dc01 120777 root:root ../../../libtooldata.so.0 +File: /usr/lib/debug/.build-id/7b/b1003c7293a492bc52063f1b075a2a3977dc01.debug 120777 root:root ../../usr/lib/libtooldata.so.0.debug +File: /usr/lib/debug/.build-id/98 40755 root:root +File: /usr/lib/debug/.build-id/98/d611ae0e6be2e96a44130c64d536a43fae7375 120777 root:root ../../../librs274.so.0 +File: /usr/lib/debug/.build-id/98/d611ae0e6be2e96a44130c64d536a43fae7375.debug 120777 root:root ../../usr/lib/librs274.so.0.debug +File: /usr/lib/debug/usr/lib/liblinuxcnchal.so.0.debug 100644 root:root d8467530c3d4c7dee1d4f54c4e52b735 +File: /usr/lib/debug/usr/lib/liblinuxcncini.so.0.debug 100644 root:root 64fab259312eb0f69a337555f8d3c9ab +File: /usr/lib/debug/usr/lib/libnml.so.0.debug 100644 root:root 940c9965d6b51a4bb9a804732ff85d1a +File: /usr/lib/debug/usr/lib/libposemath.so.0.debug 100644 root:root 1711c7b0c0d5e5b8ab725918f571a4dc +File: /usr/lib/debug/usr/lib/libpyplugin.so.0.debug 100644 root:root 09127808e9162bc7037a184b78780361 +File: /usr/lib/debug/usr/lib/librs274.so.0.debug 100644 root:root 89e7dfc08a84811e200c0ad4263d6e9a +File: /usr/lib/debug/usr/lib/libtooldata.so.0.debug 100644 root:root 496aa3045a9c239a8b5e58b589a2f0a9 File: /usr/src/debug/linuxcnc-2.9.2 40755 root:root @@ -411,2 +411,2 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/rtapi/uspace_ulapi.c 100644 root:root 7a79c737b7bb6481ebed8a50a19d97b6 -RPMIdentity: 8e8da5015a70ea7214ef4e2a0d758adffeda8f50695f68f98d971aa4ae1d22daffcff871b2a63f321dc11d642219b2c35772f2bd58fca2e037e5d9b8a37ed949 +RPMIdentity: be4408e2c99a0956aca74ced9cf765a7c378032bc3584cce7e3bdf9fe066d7fa9d755596eadaa1384c841c8e057ce3360227d26f70d0aa01d9db77301fa25f5c --- linuxcnc-2.9.2-alt4.20240203.i586.rpm.repo 2024-04-26 18:47:43.000000000 +0000 +++ linuxcnc-2.9.2-alt4.20240203.i586.rpm.hasher 2024-05-11 08:10:06.582484014 +0000 @@ -6612,3 +6612,3 @@ Requires: libXmu.so.6 >= set:lktel -Requires: libboost_python312.so.1.84.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0 +Requires: libboost_python312.so.1.85.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0 Requires: libc.so.6(GLIBC_2.2.3) @@ -7066,3 +7066,3 @@ File: /etc/linuxcnc 40755 root:root -File: /etc/linuxcnc/rtapi.conf 100644 root:root bc8a6ed1b1325f7397d6b900f7656a54 +File: /etc/linuxcnc/rtapi.conf 100644 root:root 6438d29e7dc2fc93be0c3c18e0fd81bc File: /lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 @@ -7073,6 +7073,6 @@ File: /usr/bin/axis-remote 100755 root:root 981e9bcc97828e221b97460431572c13 -File: /usr/bin/classicladder 100755 root:root 2e14309af7bfcbe5fd11bac4ad7e6dec +File: /usr/bin/classicladder 100755 root:root 40014fead847931d6d88a2f8f482ca33 File: /usr/bin/debuglevel 100755 root:root 97e6e63a3ada21ce0e0bcc7b967356c6 File: /usr/bin/elbpcom 100755 root:root 615a8db2e0e6a2c2aafed1271f8a4b1e -File: /usr/bin/genserkins 100755 root:root 3210ff3c87651986b9168f3f3e183edf +File: /usr/bin/genserkins 100755 root:root 1139d44f5a6f0a40d364c609e4ed0917 File: /usr/bin/gladevcp 100755 root:root fae29dd38c77636452fb7d1faf476d9e @@ -7081,3 +7081,3 @@ File: /usr/bin/gremlin_view 100755 root:root 28b91ed793df90dee282a917bc5e671f -File: /usr/bin/gs2_vfd 100755 root:root 09b0229d2ef85e4a13bffa918bd7757b +File: /usr/bin/gs2_vfd 100755 root:root 379bc2b320a5c5d9a3f0290c6eb8ca7c File: /usr/bin/gscreen 100755 root:root babb0c3a660a8f364a793cfc1b29b8f4 @@ -7086,23 +7086,23 @@ File: /usr/bin/hal_manualtoolchange 100755 root:root ef55e0303f12800889590798cf589f82 -File: /usr/bin/halcmd 100755 root:root 265e711c0a73d381959f3a0c04c14d5f +File: /usr/bin/halcmd 100755 root:root 601ae52591b4024b5a9bb2d7d802226b File: /usr/bin/halcmd_twopass 100755 root:root f524ed4f8a66facea94e8eebf85b7328 File: /usr/bin/halcompile 100755 root:root fbd19786f0f220820b5228b1cec74381 -File: /usr/bin/halmeter 100755 root:root 7df67532b2e240ff292b913c87e48dd9 +File: /usr/bin/halmeter 100755 root:root 3e88e48195128611002ffa9de0b290a4 File: /usr/bin/halreport 100755 root:root a67ce1beb843a453c514b9051b27a92b -File: /usr/bin/halrmt 100755 root:root beb1ee51427a2faca40d8cfe7b02c5d4 +File: /usr/bin/halrmt 100755 root:root fb59978452b83ec991aa2b9cd66081a3 File: /usr/bin/halrun 100755 root:root ab5099cc3f9f2cbfcf7e12057b924b35 -File: /usr/bin/halsampler 100755 root:root 4aaa7eb2d054a8ef149e574b08d41671 -File: /usr/bin/halscope 100755 root:root 1a167063c02730af2ac10d2cacd3d509 +File: /usr/bin/halsampler 100755 root:root b1c2b8cb03c156ba0ee95db1238645f0 +File: /usr/bin/halscope 100755 root:root 91e4754b31ae1bed7f2a674a383fe7fc File: /usr/bin/halshow 100755 root:root 3382dff126dc6c7bbdc389175f221d43 -File: /usr/bin/halstreamer 100755 root:root e0e8fa0d5be62a56d348533aa5e1d17b +File: /usr/bin/halstreamer 100755 root:root f6f303b529c6b93e05249c9ad9cb16df File: /usr/bin/haltcl 100755 root:root 5bcf2ade8f2f6fbe50ede9940477b762 -File: /usr/bin/halui 100755 root:root 1b0ef4bb950b830592ab22973dc37ccd +File: /usr/bin/halui 100755 root:root 5a4ce605a5aa4e42465d50390053ea90 File: /usr/bin/hbmgui 100755 root:root 19ccf7fd40a560f8ff862c3cf78cfa4c File: /usr/bin/hexagui 100755 root:root 8d54fa5392b6e5ed1b8a20f4e04bab9e -File: /usr/bin/hy_gt_vfd 100755 root:root 6215e0f71ecca098513290e61aa2634e -File: /usr/bin/hy_vfd 100755 root:root 0191be40129342feea097213025573fb +File: /usr/bin/hy_gt_vfd 100755 root:root dd7c039c62b91b47a066e68f8b009635 +File: /usr/bin/hy_vfd 100755 root:root 4d0b1760fcf63f94d281194d8f2afa63 File: /usr/bin/image-to-gcode 100755 root:root 85a0a069de2fda3ec9e586a0b5762f4b -File: /usr/bin/inivar 100755 root:root d78a406f833089b9be96030de2f1b03c -File: /usr/bin/io 100755 root:root 8fbaef32f0552af89809a8e9189448bc -File: /usr/bin/iov2 100755 root:root af69e33f86d3bbe7c95d7da6a20f36d1 +File: /usr/bin/inivar 100755 root:root 4b5d266da54b6e1ca6479087d6752093 +File: /usr/bin/io 100755 root:root 080ebe7938bb0b5ce29463b83ec6986c +File: /usr/bin/iov2 100755 root:root 3af52c1dec6baf530a0a8491b153a15b File: /usr/bin/latency-histogram 100755 root:root bf85ab0ac97576c844c5ebb143ff215b @@ -7113,8 +7113,8 @@ File: /usr/bin/linuxcnc_info 100755 root:root 6678cd1127b4f19957948ad842052ea4 -File: /usr/bin/linuxcnc_module_helper 104711 root:root 5c78c35fea585d06c277cab443ddce15 +File: /usr/bin/linuxcnc_module_helper 104711 root:root 5828a58c054831db4d2ed8e5832aadc7 File: /usr/bin/linuxcnc_var 100755 root:root 5f7192295532c6e8ea6afbca2ec26263 -File: /usr/bin/linuxcnclcd 100755 root:root f65cb16cc04405b4c8b8a4747be42ab6 +File: /usr/bin/linuxcnclcd 100755 root:root e788008182b665050507d0a0faaa81b1 File: /usr/bin/linuxcncmkdesktop 100755 root:root f22bde074d77f2e040f4f2c3b1a3873f -File: /usr/bin/linuxcncrsh 100755 root:root cffef64f022e6acc44176d27b21568eb -File: /usr/bin/linuxcncsvr 100755 root:root 61a91076d9e294609ad4fe8f89370c0e +File: /usr/bin/linuxcncrsh 100755 root:root 45e82a8aa576b496ba0b2d06a9706be6 +File: /usr/bin/linuxcncsvr 100755 root:root c95ab089c1caa2f31b2828757c29b8d1 File: /usr/bin/linuxcnctop 100755 root:root 997b7c0c96c54e6e59e1796dceb01ea0 @@ -7122,6 +7122,6 @@ File: /usr/bin/max5gui 100755 root:root a71ec126a28f692a73a1131ea7f253cd -File: /usr/bin/mb2hal 100755 root:root d2951cc1515fdd2e7dbe5037ebfc0466 +File: /usr/bin/mb2hal 100755 root:root 637018ae874b18770f9af7ba24e3a88a File: /usr/bin/mdi 100755 root:root 9f2a31839938c1d0d05168a52bcae196 File: /usr/bin/melfagui 100755 root:root 2ec974fa317ed4c934d8f1c90d43769e -File: /usr/bin/milltask 100755 root:root 8f1a90c69db582cada192cb1740b5253 +File: /usr/bin/milltask 100755 root:root c03a16d08484c3910fc8a176ea8a9886 File: /usr/bin/millturngui 100755 root:root 4b0278516d64b1f7c55459ab72fd1377 @@ -7130,3 +7130,3 @@ File: /usr/bin/monitor-xhc-hb04 100755 root:root 1394d62cf2f321ea551b4688e9cbd6d5 -File: /usr/bin/motion-logger 100755 root:root 6bc614dcee4008ca9de1b11e95f4bcc1 +File: /usr/bin/motion-logger 100755 root:root d29d6e3aa32b5f58abbbc00d994fa99e File: /usr/bin/moveoff_gui 100755 root:root 9dfeb8adcd430c284330eca35899561c @@ -7134,4 +7134,4 @@ File: /usr/bin/ngcgui 100755 root:root 70d303602767ac5a0796156c7c1b48e8 -File: /usr/bin/panelui 100755 root:root 022094ef6e82f9784ce0f5d22c194334 -File: /usr/bin/pi500_vfd 100755 root:root 896f9476a4759a5bf6c545c796b9a4f8 +File: /usr/bin/panelui 100755 root:root d8eabb49de265f8f022d2f1400e6e971 +File: /usr/bin/pi500_vfd 100755 root:root b850ef6a4f38f46ae8a5cf95df6589a7 File: /usr/bin/pmx485 100755 root:root 7ff1aa4706913892f257e4e4fa5caf12 @@ -7151,10 +7151,10 @@ File: /usr/bin/rotarydelta 100755 root:root ed0d03f3bbc9404b5f0ef2c4847187f2 -File: /usr/bin/rs274 100755 root:root 8f34b18197d7396df1ac0e7885970a6b -File: /usr/bin/rtapi_app 104711 root:root 1d8e5acfc34e1fed119fb30343325066 +File: /usr/bin/rs274 100755 root:root d5422bc6fc844152d0d218d86b586cce +File: /usr/bin/rtapi_app 104711 root:root c032a33e820f3382484bc599887b8b46 File: /usr/bin/scaragui 100755 root:root cc652cfdf31d0e746fdfa4870ed2e3e8 -File: /usr/bin/schedrmt 100755 root:root 11e1775354e46dd999c6df04538645bc +File: /usr/bin/schedrmt 100755 root:root c8c540755923adb7e4ae45a09f04def6 File: /usr/bin/scorbot-er-3 100755 root:root a0e4de89e1dd2c2d2139dfd4357d1a3b -File: /usr/bin/sendkeys 100755 root:root 29c37955bc8d091cac855838b4795d60 +File: /usr/bin/sendkeys 100755 root:root d846783a62f66ff3c09a503bca63c9cc File: /usr/bin/setup_designer 100755 root:root e0446a205ff7dd91b531c6009b64e27b -File: /usr/bin/shuttle 100755 root:root bf1077bfd5b476e64a858f273316160b +File: /usr/bin/shuttle 100755 root:root 78fa4eff9233653cf966c02268e5818e File: /usr/bin/sim-torch 100755 root:root c2e4bdf0eff5b3911ac5cba2787fd648 @@ -7163,7 +7163,7 @@ File: /usr/bin/stepconf 100755 root:root ae1c7366dc6c432fc1aa44528c568e70 -File: /usr/bin/svd-ps_vfd 100755 root:root c92d5aa1932dceb0bc8d99f64c56398e +File: /usr/bin/svd-ps_vfd 100755 root:root 3c64018e33ef7f1971411c2966e23d52 File: /usr/bin/teach-in 100755 root:root 5accd7150c9dadede5afed54adb904df -File: /usr/bin/thermistor 100755 root:root d24546ea64ccfa99ea754920b997939f -File: /usr/bin/tool_mmap_read 100755 root:root c9f8b26d23d8192e0d7c1aecd94e5e2c -File: /usr/bin/tool_watch 100755 root:root f86ff6393310f7c7df3fcd47d51b6bcd +File: /usr/bin/thermistor 100755 root:root ff354b2b1b3aaf2cf12f3595edb74a72 +File: /usr/bin/tool_mmap_read 100755 root:root 21a294db9a3ef184f59d346f18fc1f6a +File: /usr/bin/tool_watch 100755 root:root 059fc3ad6b664edee11ac5fde1f94e36 File: /usr/bin/tooledit 100755 root:root 15169b38b88b7b469516ccaa8f362a23 @@ -7171,8 +7171,8 @@ File: /usr/bin/update_ini 100755 root:root e859365d9e7af0e4c0f6110d047d2088 -File: /usr/bin/vfdb_vfd 100755 root:root 918a6a9ceeacfe007e5b29675aa01d01 -File: /usr/bin/vfs11_vfd 100755 root:root d1da5a6593112410f58dbec49f9f7fbb -File: /usr/bin/wj200_vfd 100755 root:root 4ed57e11df2637815ca9242b880477cf -File: /usr/bin/xhc-hb04 100755 root:root 3479f4028544326016861dd76147d665 +File: /usr/bin/vfdb_vfd 100755 root:root 593b48d8eec5e043d85a23e9f40f6afe +File: /usr/bin/vfs11_vfd 100755 root:root b4b3cb9af096c5afa9fbefda4334e64a +File: /usr/bin/wj200_vfd 100755 root:root bca898a9e2a9a26175f6da20986768d1 +File: /usr/bin/xhc-hb04 100755 root:root 2416fd223ce27feecac71023bf3ede0d File: /usr/bin/xhc-hb04-accels 100755 root:root f86d130da6d0d4e4819af4ae9b553a07 -File: /usr/bin/xhc-whb04b-6 100755 root:root 9838cb817090762403a870a9a55eda99 +File: /usr/bin/xhc-whb04b-6 100755 root:root 0b76e40f454af64b50362034ed929eaa File: /usr/bin/xyzab-tdr-gui 100755 root:root 9d4485b019ac0e51484742cef69b9ce1 @@ -7182,187 +7182,187 @@ File: /usr/lib/linuxcnc 40755 root:root -File: /usr/lib/linuxcnc/canterp.so 100644 root:root 04a1ede13c091f5fc6f2558012862c7f +File: /usr/lib/linuxcnc/canterp.so 100644 root:root 0177a4065d821436a5104e4d16b57059 File: /usr/lib/linuxcnc/modules 40755 root:root -File: /usr/lib/linuxcnc/modules/5axiskins.so 100644 root:root 60b9664db80fe031c7469f4ded46ac1c -File: /usr/lib/linuxcnc/modules/abs.so 100644 root:root 276f671f4edc494e085952a186ddcb42 -File: /usr/lib/linuxcnc/modules/abs_s32.so 100644 root:root f81cc1f0a6ef0af9dd01caac3f3efe5a -File: /usr/lib/linuxcnc/modules/and2.so 100644 root:root 8b6866e9baf38d2fe217c14b7eecadee -File: /usr/lib/linuxcnc/modules/anglejog.so 100644 root:root 3dbbe3786609bd47d564f922f5199c04 -File: /usr/lib/linuxcnc/modules/axistest.so 100644 root:root 11eec953cb441df2601dd3f616323a13 -File: /usr/lib/linuxcnc/modules/bin2gray.so 100644 root:root 0669eb8dd3088febc6e89f123e1a78b3 -File: /usr/lib/linuxcnc/modules/biquad.so 100644 root:root 69b670bb8abf4fd4c0428798ca37227b -File: /usr/lib/linuxcnc/modules/bitslice.so 100644 root:root 6c080ea3d0c9e8c4cc7215bac880f51b -File: /usr/lib/linuxcnc/modules/bitwise.so 100644 root:root 58c97b7ba09cd79038e73196f38294b8 -File: /usr/lib/linuxcnc/modules/bldc.so 100644 root:root b306677676b68d09cf2a2976fc653ecf -File: /usr/lib/linuxcnc/modules/blend.so 100644 root:root 5b3be51141ee01a614e8c5a57c0a457c -File: /usr/lib/linuxcnc/modules/boss_plc.so 100644 root:root 5b70e299241cf460ff7c041d3efe42e2 -File: /usr/lib/linuxcnc/modules/carousel.so 100644 root:root 3da4c79485287ffebb637d63cad17443 -File: /usr/lib/linuxcnc/modules/charge_pump.so 100644 root:root 0c7a56ec0ba948cb311a30143c0ff764 -File: /usr/lib/linuxcnc/modules/clarke2.so 100644 root:root 26c13341ba34af3b8b58f50dd1d022c3 -File: /usr/lib/linuxcnc/modules/clarke3.so 100644 root:root ae4961262b3e9c076bc50d091531386e -File: /usr/lib/linuxcnc/modules/clarkeinv.so 100644 root:root babcf7c5d6ee05c4e86e5f409c32f2cd -File: /usr/lib/linuxcnc/modules/classicladder_rt.so 100644 root:root 94d7abc60373b5a0263c954a358f4a79 -File: /usr/lib/linuxcnc/modules/comp.so 100644 root:root 05b9d4ecbd45171af9686f6deae1296d -File: /usr/lib/linuxcnc/modules/constant.so 100644 root:root 7e93ff280454096264c1021053549347 -File: /usr/lib/linuxcnc/modules/conv_bit_float.so 100644 root:root bc240b455e6f35bcefb1603440d75612 -File: /usr/lib/linuxcnc/modules/conv_bit_s32.so 100644 root:root fc21342d32de822e03f1720f9a32fcd9 -File: /usr/lib/linuxcnc/modules/conv_bit_u32.so 100644 root:root 1a7c49399aee2b8a21e021e5fa8004e4 -File: /usr/lib/linuxcnc/modules/conv_float_s32.so 100644 root:root 41f123df635317030775164c412e0974 -File: /usr/lib/linuxcnc/modules/conv_float_u32.so 100644 root:root 08e38ea9fbd181b20a770ed0252d4264 -File: /usr/lib/linuxcnc/modules/conv_s32_bit.so 100644 root:root c26c63ead6de615cbfe3fcd977e2927d -File: /usr/lib/linuxcnc/modules/conv_s32_float.so 100644 root:root d2d2331cf04b043624de4fd2c9e57148 -File: /usr/lib/linuxcnc/modules/conv_s32_u32.so 100644 root:root f98eff7316e3baa388d2a27020e23fa1 -File: /usr/lib/linuxcnc/modules/conv_u32_bit.so 100644 root:root c3d4ffb152a0a13421ea882830263355 -File: /usr/lib/linuxcnc/modules/conv_u32_float.so 100644 root:root 3b3c44de0aba6c70c72b40162fa5c6c0 -File: /usr/lib/linuxcnc/modules/conv_u32_s32.so 100644 root:root 988497896199a38a1297e3afbb102716 -File: /usr/lib/linuxcnc/modules/corexy_by_hal.so 100644 root:root b6e9672ccc3d63f7780945350ec9ba90 +File: /usr/lib/linuxcnc/modules/5axiskins.so 100644 root:root 72137d35d98610d6c6b11c9fd2fc7572 +File: /usr/lib/linuxcnc/modules/abs.so 100644 root:root b173162a6683cb6d684c397c9c522223 +File: /usr/lib/linuxcnc/modules/abs_s32.so 100644 root:root 68fe538aefbf505fc6ad8c09da4f4f52 +File: /usr/lib/linuxcnc/modules/and2.so 100644 root:root 6024f2b3e8e5b355b0f407968e64ed03 +File: /usr/lib/linuxcnc/modules/anglejog.so 100644 root:root 438945ffab4e90239229fec400578c6d +File: /usr/lib/linuxcnc/modules/axistest.so 100644 root:root 18e3b7dcc6605db9cd29dd0beed29a05 +File: /usr/lib/linuxcnc/modules/bin2gray.so 100644 root:root d91eed3776e1d0c055d4bfabf6834720 +File: /usr/lib/linuxcnc/modules/biquad.so 100644 root:root ca00462c44c8d878f9a09536388e3c7f +File: /usr/lib/linuxcnc/modules/bitslice.so 100644 root:root b8104d0caab1bc6ba8810c81d6dc92b0 +File: /usr/lib/linuxcnc/modules/bitwise.so 100644 root:root 6067ab6c6cc557ac697935a4d7711ae3 +File: /usr/lib/linuxcnc/modules/bldc.so 100644 root:root dce07d56baf0c20cb39a3423681ed7e4 +File: /usr/lib/linuxcnc/modules/blend.so 100644 root:root 24f6c36431cfed9f98455f7c4ae2e2a1 +File: /usr/lib/linuxcnc/modules/boss_plc.so 100644 root:root 4a7d32d6b3c9db5e66713fe07e2ea9a5 +File: /usr/lib/linuxcnc/modules/carousel.so 100644 root:root 7d03f8dcd4ea636008f6e516f426fa2a +File: /usr/lib/linuxcnc/modules/charge_pump.so 100644 root:root 457e8bc5679847545a9c754607ebd845 +File: /usr/lib/linuxcnc/modules/clarke2.so 100644 root:root b19bfc8377cff55d43d72c8c5e4f850b +File: /usr/lib/linuxcnc/modules/clarke3.so 100644 root:root 9e5aeefe81b2818890758c9187d4073a +File: /usr/lib/linuxcnc/modules/clarkeinv.so 100644 root:root 711f03dfa38762d7f7d54f1330659ada +File: /usr/lib/linuxcnc/modules/classicladder_rt.so 100644 root:root 7b348b36d1189c008262bb6eeaa00aef +File: /usr/lib/linuxcnc/modules/comp.so 100644 root:root 65094e9fd139371cf0e423a4dcfbee98 +File: /usr/lib/linuxcnc/modules/constant.so 100644 root:root 73cc3635cecd50ae6811a2889752a47c +File: /usr/lib/linuxcnc/modules/conv_bit_float.so 100644 root:root 3acc38a6597a3bec17be3541dd558bb0 +File: /usr/lib/linuxcnc/modules/conv_bit_s32.so 100644 root:root 87fd2a2453850c6eb33e7473c6cf1105 +File: /usr/lib/linuxcnc/modules/conv_bit_u32.so 100644 root:root c437bcc5bfbd68d6f8c3474bf30e705d +File: /usr/lib/linuxcnc/modules/conv_float_s32.so 100644 root:root 975efbfa829d1ffe109c2b1a905e5b11 +File: /usr/lib/linuxcnc/modules/conv_float_u32.so 100644 root:root 6bf4f764dbd80766101a8c3a9f61c72b +File: /usr/lib/linuxcnc/modules/conv_s32_bit.so 100644 root:root 7631fde466bd229e6a083ec43609e670 +File: /usr/lib/linuxcnc/modules/conv_s32_float.so 100644 root:root d40340841e95d6064cfe24ba01f73c1a +File: /usr/lib/linuxcnc/modules/conv_s32_u32.so 100644 root:root 9bc7285486b75baaaf0f6150628d850a +File: /usr/lib/linuxcnc/modules/conv_u32_bit.so 100644 root:root fc92584b632c10e3fa0833fac86037ea +File: /usr/lib/linuxcnc/modules/conv_u32_float.so 100644 root:root e24ed00fd1e282bc6715a4802ab2ea0d +File: /usr/lib/linuxcnc/modules/conv_u32_s32.so 100644 root:root 5fab65219a7ae00ce634cf297afeb92d +File: /usr/lib/linuxcnc/modules/corexy_by_hal.so 100644 root:root 8af80ba6df216d68f3f0ae43d97806fe File: /usr/lib/linuxcnc/modules/corexykins.so 100644 root:root 55e23c6f56217b99a270c3fb8e60504c File: /usr/lib/linuxcnc/modules/counter.so 100644 root:root f9cb62f103c4a41551777d560f123aca -File: /usr/lib/linuxcnc/modules/dbounce.so 100644 root:root 53fd9627e6de3a56b4f69092489f5626 -File: /usr/lib/linuxcnc/modules/ddt.so 100644 root:root c04d645170d070efda2df6c638afc65b -File: /usr/lib/linuxcnc/modules/deadzone.so 100644 root:root 576c850300d43599ff83634904af7fc6 -File: /usr/lib/linuxcnc/modules/debounce.so 100644 root:root c90ed47eefa69e0f32cb66f062ece5f2 -File: /usr/lib/linuxcnc/modules/demux.so 100644 root:root 7915ff5b95b3ae53a83c945112740563 -File: /usr/lib/linuxcnc/modules/differential.so 100644 root:root f1e732c29ff6e452526ca14d4ba70790 -File: /usr/lib/linuxcnc/modules/div2.so 100644 root:root 544d4d618d1ed4a57cef3e04ee8ae73b -File: /usr/lib/linuxcnc/modules/edge.so 100644 root:root 379a1e1029d0379916a157e075e8cc1d -File: /usr/lib/linuxcnc/modules/encoder.so 100644 root:root 5595020901aff4962b5639402bf776c6 -File: /usr/lib/linuxcnc/modules/encoder_ratio.so 100644 root:root 03a725e39f44bd72b7c2dd30da8eda79 -File: /usr/lib/linuxcnc/modules/enum.so 100644 root:root 5ad1067467066fb7478f110acd5e713f -File: /usr/lib/linuxcnc/modules/eoffset_per_angle.so 100644 root:root c2eda4bd18b90e35801b0000341fb612 -File: /usr/lib/linuxcnc/modules/estop_latch.so 100644 root:root f9d46efda764a7e282859cf2916a2e74 -File: /usr/lib/linuxcnc/modules/feedcomp.so 100644 root:root 0c598a45f4372a05e27dfff9bfc29eeb -File: /usr/lib/linuxcnc/modules/filter_kalman.so 100644 root:root d073bccdedbaf93c06ed987e51c3bdbe -File: /usr/lib/linuxcnc/modules/flipflop.so 100644 root:root 6a4d6fba01be9097ab573cd6417a360c -File: /usr/lib/linuxcnc/modules/gantry.so 100644 root:root 9775a5cc124f0bf70968732b1d3380e0 -File: /usr/lib/linuxcnc/modules/gearchange.so 100644 root:root 9f801be206b50bad1153a75711f1573f -File: /usr/lib/linuxcnc/modules/genhexkins.so 100644 root:root 6b926aabd7b57e8ff16e779167365f63 -File: /usr/lib/linuxcnc/modules/genserkins.so 100644 root:root 2e419a9633c459be793e48b3d8189030 -File: /usr/lib/linuxcnc/modules/gray2bin.so 100644 root:root 82453a872040ff332f49c94e020b715a -File: /usr/lib/linuxcnc/modules/hal_bb_gpio.so 100644 root:root 9810fd2d8c2342d89d6aff3f089dcb94 -File: /usr/lib/linuxcnc/modules/hal_gm.so 100644 root:root 3aa8bee6a747beaec05c057845f16b4f -File: /usr/lib/linuxcnc/modules/hal_lib.so 100644 root:root 79f4f7e4c4128f5858f4031a6e46bcd6 -File: /usr/lib/linuxcnc/modules/hal_parport.so 100644 root:root d9b0297294df5fed39118dae2cd8237c -File: /usr/lib/linuxcnc/modules/hal_pi_gpio.so 100644 root:root 729e3b16c48fe18a9ea7ff1530869fd1 -File: /usr/lib/linuxcnc/modules/hal_ppmc.so 100644 root:root c8e1546214b824e2b5ee245ab884c630 -File: /usr/lib/linuxcnc/modules/hal_speaker.so 100644 root:root dbb8f5ef4e3e8bcc50cb54ea1320a1e7 -File: /usr/lib/linuxcnc/modules/histobins.so 100644 root:root 4b894a464fd625057775119edd45a038 -File: /usr/lib/linuxcnc/modules/hm2_7i43.so 100644 root:root 25bba6daca041769a3ae1b2c0192a7ed -File: /usr/lib/linuxcnc/modules/hm2_7i90.so 100644 root:root 33f68f2b2525c022a0a858d86e7edf22 -File: /usr/lib/linuxcnc/modules/hm2_eth.so 100644 root:root 9338ed3048a23fc6cbb4f3582a181f4e -File: /usr/lib/linuxcnc/modules/hm2_pci.so 100644 root:root 3e3dff462b1d403da5a6d7c0f416a2fe -File: /usr/lib/linuxcnc/modules/hm2_rpspi.so 100644 root:root 4fc7cf45c6a42c9ce6ca0577ccb8d2c4 -File: /usr/lib/linuxcnc/modules/hm2_spi.so 100644 root:root 607e04826f264fd5748eabced8fd045c -File: /usr/lib/linuxcnc/modules/hm2_test.so 100644 root:root 9522d8c53fdaf143c6fa20a238f8fcfd +File: /usr/lib/linuxcnc/modules/dbounce.so 100644 root:root 5fa1c9bc0946094da6abd555dd315aa9 +File: /usr/lib/linuxcnc/modules/ddt.so 100644 root:root 05e98360b39e1644225d93d44a2dafc7 +File: /usr/lib/linuxcnc/modules/deadzone.so 100644 root:root 4a8caea05bc7ad1aec9032fb6b685fca +File: /usr/lib/linuxcnc/modules/debounce.so 100644 root:root 4bc071952a147b10e7b7bb91185e6571 +File: /usr/lib/linuxcnc/modules/demux.so 100644 root:root 6839914548111a35fe90f670fc7df7f2 +File: /usr/lib/linuxcnc/modules/differential.so 100644 root:root 043aa4be70923e3ab58ed8c140e954d1 +File: /usr/lib/linuxcnc/modules/div2.so 100644 root:root dbaaae8f24d3a5ea1c654d29fcd1d32d +File: /usr/lib/linuxcnc/modules/edge.so 100644 root:root 5025201b558b61fc3ec9db49a9036795 +File: /usr/lib/linuxcnc/modules/encoder.so 100644 root:root 9f6cc54fd67c3c33185d0cef3b2a5b8e +File: /usr/lib/linuxcnc/modules/encoder_ratio.so 100644 root:root 6b272786ea838bed6bfc0ae9bcc184ab +File: /usr/lib/linuxcnc/modules/enum.so 100644 root:root c07e97cf2d193a490ff8b0ff3a14a859 +File: /usr/lib/linuxcnc/modules/eoffset_per_angle.so 100644 root:root a9fe66929dd50d308f7143049a720f72 +File: /usr/lib/linuxcnc/modules/estop_latch.so 100644 root:root 98d0c26d2f828f4cd2518237399d438e +File: /usr/lib/linuxcnc/modules/feedcomp.so 100644 root:root c915f208277bd3889ecc1974ea7bc41c +File: /usr/lib/linuxcnc/modules/filter_kalman.so 100644 root:root 6ae6b8c3fd32c7e718460c85e73c84bd +File: /usr/lib/linuxcnc/modules/flipflop.so 100644 root:root 99d3f465e19317da9f5557c36b492fa4 +File: /usr/lib/linuxcnc/modules/gantry.so 100644 root:root 2a0a7eddc67fa1f2bbce5069df96dfee +File: /usr/lib/linuxcnc/modules/gearchange.so 100644 root:root f75804db9130298bcd07350d34f9dd5a +File: /usr/lib/linuxcnc/modules/genhexkins.so 100644 root:root a76535f58d581d19bbd0ba29f3e084d4 +File: /usr/lib/linuxcnc/modules/genserkins.so 100644 root:root 72f9cd13aba240179a280c6efaa1788a +File: /usr/lib/linuxcnc/modules/gray2bin.so 100644 root:root 45c5e5d8274090fe91ecb7e7e4797f23 +File: /usr/lib/linuxcnc/modules/hal_bb_gpio.so 100644 root:root 644afef7938247439419477ef14019f3 +File: /usr/lib/linuxcnc/modules/hal_gm.so 100644 root:root 6919c4a44a8caed859fd72e7fc49ae1a +File: /usr/lib/linuxcnc/modules/hal_lib.so 100644 root:root a2d8f8f3816904c877a845a617e6d884 +File: /usr/lib/linuxcnc/modules/hal_parport.so 100644 root:root 9d0a850be5b268545001ee65c753a3ba +File: /usr/lib/linuxcnc/modules/hal_pi_gpio.so 100644 root:root 26f083a5895138aa92887003eed5f416 +File: /usr/lib/linuxcnc/modules/hal_ppmc.so 100644 root:root 3a0f7886f19e5fd50a3397eb0dcda44b +File: /usr/lib/linuxcnc/modules/hal_speaker.so 100644 root:root 88bb9ee2727de553c151adbba98fc33e +File: /usr/lib/linuxcnc/modules/histobins.so 100644 root:root b579c921d1529c98f404e992bd75f93a +File: /usr/lib/linuxcnc/modules/hm2_7i43.so 100644 root:root c70a04b904906ac19737ce012e9e16d6 +File: /usr/lib/linuxcnc/modules/hm2_7i90.so 100644 root:root fe3a98c07079439ac6f3c8a9af89cc09 +File: /usr/lib/linuxcnc/modules/hm2_eth.so 100644 root:root 3681830677ae1a548533cda6b288bfd1 +File: /usr/lib/linuxcnc/modules/hm2_pci.so 100644 root:root d013ffd8e770da4f286bad44a2e4a9a2 +File: /usr/lib/linuxcnc/modules/hm2_rpspi.so 100644 root:root 7b1003c734563c52b582739662695eba +File: /usr/lib/linuxcnc/modules/hm2_spi.so 100644 root:root 9f3a991fee1e729c4c22d95aa2251c73 +File: /usr/lib/linuxcnc/modules/hm2_test.so 100644 root:root a7058be1f5331dc28fcf01fba447daa2 File: /usr/lib/linuxcnc/modules/homecomp.so 100644 root:root 04c28ac7ec8f3afaa0b1c4f67260d6c0 File: /usr/lib/linuxcnc/modules/homemod.so 100644 root:root 6cf7afde473c1e7a18da0e870846c9fe -File: /usr/lib/linuxcnc/modules/hostmot2.so 100644 root:root 1336edf47f87475458a5e4b56c255512 -File: /usr/lib/linuxcnc/modules/hypot.so 100644 root:root 2c23b3a2c66a37358daccd73c6c79236 -File: /usr/lib/linuxcnc/modules/ilowpass.so 100644 root:root 6fc376d57f53e14d12ae2e08e7e76aa9 -File: /usr/lib/linuxcnc/modules/integ.so 100644 root:root 6a582df6ca778f2c3d2a6281faea16e2 -File: /usr/lib/linuxcnc/modules/invert.so 100644 root:root a8c6e1f3d9384b1742a7af172fa4f12f -File: /usr/lib/linuxcnc/modules/joyhandle.so 100644 root:root 796310a02b1a8a55ee125b4f5d01eec6 -File: /usr/lib/linuxcnc/modules/knob2float.so 100644 root:root afbc58064cbfe3dbf31b83f842574d03 -File: /usr/lib/linuxcnc/modules/latencybins.so 100644 root:root 74164af1a6400c4835c86114ea5e77e3 -File: /usr/lib/linuxcnc/modules/lcd.so 100644 root:root cedccf4275c4a61d93a9c0f7cb7e8984 -File: /usr/lib/linuxcnc/modules/limit1.so 100644 root:root c22f5f99ec5dc3f1f4549884e3551ac2 -File: /usr/lib/linuxcnc/modules/limit2.so 100644 root:root c26664f9195b5307502c65dd890b8d99 -File: /usr/lib/linuxcnc/modules/limit3.so 100644 root:root 63a6e083539787b101df2694b629810a -File: /usr/lib/linuxcnc/modules/limit_axis.so 100644 root:root f845ae587510cd71afbf8e9bbd4d620f -File: /usr/lib/linuxcnc/modules/lincurve.so 100644 root:root 740ae5048ac4c8e4ed1bfa53c5c7f00d +File: /usr/lib/linuxcnc/modules/hostmot2.so 100644 root:root 2cbd139a801a097bd0ca9683c8f62080 +File: /usr/lib/linuxcnc/modules/hypot.so 100644 root:root 70c74182c915dea0c1b5ddd9bf9c54e6 +File: /usr/lib/linuxcnc/modules/ilowpass.so 100644 root:root 5ef894d54518bd7b07e19a363b8660ae +File: /usr/lib/linuxcnc/modules/integ.so 100644 root:root 5a1c9b48437f2313ebafb7ecc23345bb +File: /usr/lib/linuxcnc/modules/invert.so 100644 root:root 3a5a0e0ccdb38642a90743fb02d1045d +File: /usr/lib/linuxcnc/modules/joyhandle.so 100644 root:root 3fbe7eb4a09183c0e35a9e89dd4fa7f8 +File: /usr/lib/linuxcnc/modules/knob2float.so 100644 root:root 009e8146aa962ee18b7d6ca20f169a82 +File: /usr/lib/linuxcnc/modules/latencybins.so 100644 root:root 81e99ca723527dbb2f36b8238afcf65a +File: /usr/lib/linuxcnc/modules/lcd.so 100644 root:root f6bb21a11f54fc168d67eadd5f47268b +File: /usr/lib/linuxcnc/modules/limit1.so 100644 root:root 391d78139c71d53a8a7ab079b123263d +File: /usr/lib/linuxcnc/modules/limit2.so 100644 root:root 61aacd9215dee3c714657abe1e8615de +File: /usr/lib/linuxcnc/modules/limit3.so 100644 root:root aeaecb2d0e2d9a5263b06c64d532a4b7 +File: /usr/lib/linuxcnc/modules/limit_axis.so 100644 root:root 738e0898e7b1fb494174b0ae9b449ddd +File: /usr/lib/linuxcnc/modules/lincurve.so 100644 root:root 7893e938ac619cb365130e892dff1459 File: /usr/lib/linuxcnc/modules/lineardeltakins.so 100644 root:root e1219bdee1acf5d80470c45ef5f2ef79 File: /usr/lib/linuxcnc/modules/linuxcnc 40755 root:root -File: /usr/lib/linuxcnc/modules/logic.so 100644 root:root cf2f93341c19b2e9bbfb0189ac631ca1 -File: /usr/lib/linuxcnc/modules/lowpass.so 100644 root:root 426b4d61b1f6ae65315d01559ded5c8f -File: /usr/lib/linuxcnc/modules/lut5.so 100644 root:root 30d8adcde718da85a38f98846df97003 -File: /usr/lib/linuxcnc/modules/maj3.so 100644 root:root d1b5412ccdd7b24f1db44f5ecfd40932 -File: /usr/lib/linuxcnc/modules/match8.so 100644 root:root 266980bd86ec394148809ae00e80e805 +File: /usr/lib/linuxcnc/modules/logic.so 100644 root:root 7ecd1e44ef306c7eee963e3d94fb517a +File: /usr/lib/linuxcnc/modules/lowpass.so 100644 root:root 11220e07309fd94b261dff5fb170a924 +File: /usr/lib/linuxcnc/modules/lut5.so 100644 root:root a04abf9bf1e2adb4cd9f8a1812fc4c66 +File: /usr/lib/linuxcnc/modules/maj3.so 100644 root:root 26255dd44c4ab311459ced698d41a5a7 +File: /usr/lib/linuxcnc/modules/match8.so 100644 root:root 6c30b83b73a120b92e1ace15fe4973e2 File: /usr/lib/linuxcnc/modules/matrix_kb.so 100644 root:root 084acee4c0c968ccc76bb091f0100074 -File: /usr/lib/linuxcnc/modules/max31855.so 100644 root:root 0891926d813ca1ff5d5748013369b755 +File: /usr/lib/linuxcnc/modules/max31855.so 100644 root:root dd07ec0a80ec90960a5127a2b48720e3 File: /usr/lib/linuxcnc/modules/maxkins.so 100644 root:root 8112820624db3b0a44d9fe92be42756c -File: /usr/lib/linuxcnc/modules/mesa_7i65.so 100644 root:root fc13c25a463ad5edcc64be1b3202aacb -File: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so 100644 root:root 88adb4f7b5805f87d98131c3e659d9f1 -File: /usr/lib/linuxcnc/modules/mesa_uart.so 100644 root:root fa4d1cd1389d18e393efa711b89bfb7d -File: /usr/lib/linuxcnc/modules/message.so 100644 root:root 355bb73aa3f975735a60ce1e2b7aa1bb -File: /usr/lib/linuxcnc/modules/millturn.so 100644 root:root d7443aa1d30b9f4ffcad88a107088d9b -File: /usr/lib/linuxcnc/modules/minmax.so 100644 root:root 150aeaf3f8ad5e6ac7826908e041e650 -File: /usr/lib/linuxcnc/modules/modmath.so 100644 root:root 3afe43be76dcf925dabcca7c83fdab70 -File: /usr/lib/linuxcnc/modules/motmod.so 100644 root:root a1a11f437641fe78d026129a857421e5 -File: /usr/lib/linuxcnc/modules/moveoff.so 100644 root:root 9f7157a0c0e4276b3ca5d4a4283dafc0 -File: /usr/lib/linuxcnc/modules/mult2.so 100644 root:root 844e47fcbdd248dd11722fd74dc4dfef -File: /usr/lib/linuxcnc/modules/multiclick.so 100644 root:root 73c7f9c212e876f2aeb62cca955c5851 -File: /usr/lib/linuxcnc/modules/multiswitch.so 100644 root:root d3615404cdb54a07b53bc9efeff735b0 -File: /usr/lib/linuxcnc/modules/mux16.so 100644 root:root 612d17506243706935bde97a266ee3c4 -File: /usr/lib/linuxcnc/modules/mux2.so 100644 root:root 3c9d61970e58031a67a1beb9654a6e47 -File: /usr/lib/linuxcnc/modules/mux4.so 100644 root:root 2a0c77d26e550df67daa915181a34381 -File: /usr/lib/linuxcnc/modules/mux8.so 100644 root:root 89681cd508b376895d851d17e39c17bb -File: /usr/lib/linuxcnc/modules/mux_generic.so 100644 root:root 554c71542093b1f04d9f3bc063a55ee4 -File: /usr/lib/linuxcnc/modules/near.so 100644 root:root 0cfa713199869960a8e60620402c8b3d -File: /usr/lib/linuxcnc/modules/not.so 100644 root:root ac1bd8b133a26aaf9cefa86caf619404 -File: /usr/lib/linuxcnc/modules/offset.so 100644 root:root a5be744f8dd0dfc8fbfb046da5219540 -File: /usr/lib/linuxcnc/modules/ohmic.so 100644 root:root e065ff307472ef0408d2957155e2abf5 -File: /usr/lib/linuxcnc/modules/oneshot.so 100644 root:root 5bbff21831579d545ca439d2c1f8da9f -File: /usr/lib/linuxcnc/modules/or2.so 100644 root:root 74d642c0379b1670ffb3f7021dce6174 -File: /usr/lib/linuxcnc/modules/orient.so 100644 root:root 327c81ed8fef5f8bd5163ceb2298e45a -File: /usr/lib/linuxcnc/modules/pentakins.so 100644 root:root e88288d3462e2a69bd22eb6a8e1473ea -File: /usr/lib/linuxcnc/modules/pid.so 100644 root:root ea2adde47ffd80197dfbb29e8901602f -File: /usr/lib/linuxcnc/modules/plasmac.so 100644 root:root 189581af82d4ad185efe25e7a27ca6fc -File: /usr/lib/linuxcnc/modules/pumakins.so 100644 root:root 19f41db7ffc28c3f1c9e08b31fe90516 +File: /usr/lib/linuxcnc/modules/mesa_7i65.so 100644 root:root 6371c3ed478665d2f8bec8be7f37d770 +File: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so 100644 root:root a5cb9c000910b2310c7b131024aaf04d +File: /usr/lib/linuxcnc/modules/mesa_uart.so 100644 root:root 60d06bfd3db4f83cf0659d623292c456 +File: /usr/lib/linuxcnc/modules/message.so 100644 root:root f63a9592578ff4d18231b18bd9826f11 +File: /usr/lib/linuxcnc/modules/millturn.so 100644 root:root 4d646cee4961304fdf008fdcbcbaff19 +File: /usr/lib/linuxcnc/modules/minmax.so 100644 root:root a2516b1dfa571ca237c3e042e242d99e +File: /usr/lib/linuxcnc/modules/modmath.so 100644 root:root 0304884476b9b9dcdcb0c6b16f670692 +File: /usr/lib/linuxcnc/modules/motmod.so 100644 root:root 6bb9a1760c8b9939573d235d2fabfdbf +File: /usr/lib/linuxcnc/modules/moveoff.so 100644 root:root 431682ccdfe1f2cfed59d9657f999480 +File: /usr/lib/linuxcnc/modules/mult2.so 100644 root:root 4db9f74106e0c18703136946f3e452f8 +File: /usr/lib/linuxcnc/modules/multiclick.so 100644 root:root 463c3028ec968c116081c855e3d02afd +File: /usr/lib/linuxcnc/modules/multiswitch.so 100644 root:root fc15a938f6b0185e902e33cec0a86b6f +File: /usr/lib/linuxcnc/modules/mux16.so 100644 root:root b200e80c4b393c7a7cff0404c5974505 +File: /usr/lib/linuxcnc/modules/mux2.so 100644 root:root ad885aac27c833a801676a9a130d8de1 +File: /usr/lib/linuxcnc/modules/mux4.so 100644 root:root cd63fe84e69bc41a2e9f29102eb65136 +File: /usr/lib/linuxcnc/modules/mux8.so 100644 root:root 62db1da9fe4da9a2d8cff585d35e5d47 +File: /usr/lib/linuxcnc/modules/mux_generic.so 100644 root:root 766c12dcbfe18d21a0417f66620b64c8 +File: /usr/lib/linuxcnc/modules/near.so 100644 root:root 610e7a766c9b2813208a2e7936152fb8 +File: /usr/lib/linuxcnc/modules/not.so 100644 root:root a5705c985a6e9db0c7b2181c58143ffd +File: /usr/lib/linuxcnc/modules/offset.so 100644 root:root 1bc816c0c951f33bcb01df17c2278fb7 +File: /usr/lib/linuxcnc/modules/ohmic.so 100644 root:root d0f43e12c18082c4fb1f9c1c88fd1fd4 +File: /usr/lib/linuxcnc/modules/oneshot.so 100644 root:root 2f837bb876fa89329046c2e8ff13cd99 +File: /usr/lib/linuxcnc/modules/or2.so 100644 root:root 9645e1f35457ecb636425c982e0baae2 +File: /usr/lib/linuxcnc/modules/orient.so 100644 root:root c3c863f33a724fdcd67a1f3dc0d736f7 +File: /usr/lib/linuxcnc/modules/pentakins.so 100644 root:root b4280db7b259e8f5f988b5c453011c21 +File: /usr/lib/linuxcnc/modules/pid.so 100644 root:root 977706854b23e4c30764759834f1ba26 +File: /usr/lib/linuxcnc/modules/plasmac.so 100644 root:root e0cdb4f9c08d7cbc4f9c6c7e19d30631 +File: /usr/lib/linuxcnc/modules/pumakins.so 100644 root:root e5d640e4f7fbd4cfa5bfa70ce3617239 File: /usr/lib/linuxcnc/modules/pwmgen.so 100644 root:root dcda3bc78cd070184a7e162a83c6263e File: /usr/lib/linuxcnc/modules/rosekins.so 100644 root:root 985fff0b6ebf02c2dd0b247096d50758 -File: /usr/lib/linuxcnc/modules/rotarydeltakins.so 100644 root:root a1a9ad9efc3d7f449855a0f0a6e10e03 +File: /usr/lib/linuxcnc/modules/rotarydeltakins.so 100644 root:root 4b8ba236398066708c09ab5472b2b2c3 File: /usr/lib/linuxcnc/modules/rotatekins.so 100644 root:root 5d1bf1ef4a17873ad60104ca336a24db -File: /usr/lib/linuxcnc/modules/sample_hold.so 100644 root:root 7db4baafdcc087a235f78c4cee2bf108 -File: /usr/lib/linuxcnc/modules/sampler.so 100644 root:root 05d6af58aa829b975e1b774eb00dae56 -File: /usr/lib/linuxcnc/modules/scale.so 100644 root:root f0f8a7f7df394a8d92652ac10928fd20 -File: /usr/lib/linuxcnc/modules/scaled_s32_sums.so 100644 root:root a9fdde63dbb0de7708d46aa4d65b8e76 -File: /usr/lib/linuxcnc/modules/scarakins.so 100644 root:root 6ad22e8a1dffd1107564b64a69885edb -File: /usr/lib/linuxcnc/modules/scope_rt.so 100644 root:root 837aaa11bf5a4b095023ffb074eb9867 +File: /usr/lib/linuxcnc/modules/sample_hold.so 100644 root:root bd03293097e29437226c3671afa10d56 +File: /usr/lib/linuxcnc/modules/sampler.so 100644 root:root 229225e60474ecb5964dd0e183dc6665 +File: /usr/lib/linuxcnc/modules/scale.so 100644 root:root 46e8a193b38943d4b1a2035dc8c45585 +File: /usr/lib/linuxcnc/modules/scaled_s32_sums.so 100644 root:root 3f380de15d46a694dd79b66ab133ae28 +File: /usr/lib/linuxcnc/modules/scarakins.so 100644 root:root 73b63f5cda0a7c0b42e94beda5ad83c8 +File: /usr/lib/linuxcnc/modules/scope_rt.so 100644 root:root f7688c96b67c7138b140e5b4bd16dc60 File: /usr/lib/linuxcnc/modules/scorbot-kins.so 100644 root:root ce4f81fa1454b108d560c2363a76bdb0 -File: /usr/lib/linuxcnc/modules/select8.so 100644 root:root fd2bf7ae785372b1f50a8908b4d1a084 -File: /usr/lib/linuxcnc/modules/serport.so 100644 root:root d15768f35e773badf91418727ba03098 -File: /usr/lib/linuxcnc/modules/setsserial.so 100644 root:root e431c2dbbdf7876dda140b2a1ea27490 -File: /usr/lib/linuxcnc/modules/siggen.so 100644 root:root 645bae36b7a9443f14e09795026b47ec -File: /usr/lib/linuxcnc/modules/sim_axis_hardware.so 100644 root:root d6a865bf023d3dd04fe5c7e6f7e9c764 -File: /usr/lib/linuxcnc/modules/sim_encoder.so 100644 root:root b3f21f3460b040a2c805b29cb8538145 -File: /usr/lib/linuxcnc/modules/sim_home_switch.so 100644 root:root 8e04d7d72dcdebbb421983b87e352ed3 -File: /usr/lib/linuxcnc/modules/sim_matrix_kb.so 100644 root:root 4e5166f11123cbb748a07fa2f8870fab -File: /usr/lib/linuxcnc/modules/sim_parport.so 100644 root:root 299e288d5590d4e9da516e2b2872482d -File: /usr/lib/linuxcnc/modules/sim_spindle.so 100644 root:root b9495de39d492629b37a7eca7dc7b7ce -File: /usr/lib/linuxcnc/modules/simple_tp.so 100644 root:root 4649cfa0a4455d1b5fc00539ace8adfe -File: /usr/lib/linuxcnc/modules/sphereprobe.so 100644 root:root aa11efdb8b5010dc76e50b2edd34c3e8 -File: /usr/lib/linuxcnc/modules/spindle.so 100644 root:root de6fc8754853d2ef5aefca562d4ebf04 -File: /usr/lib/linuxcnc/modules/spindle_monitor.so 100644 root:root cf75cc0c2fa26429916d4c451f2f0618 +File: /usr/lib/linuxcnc/modules/select8.so 100644 root:root bad41cd8de94f1aa9f67d48eb86158d7 +File: /usr/lib/linuxcnc/modules/serport.so 100644 root:root 615a99f41604f4d55a22c0d990e66017 +File: /usr/lib/linuxcnc/modules/setsserial.so 100644 root:root 90e563c3ad08dba4e0ec58ddbefe010e +File: /usr/lib/linuxcnc/modules/siggen.so 100644 root:root af07152d2d747d7c4e1f5a4d797e40ad +File: /usr/lib/linuxcnc/modules/sim_axis_hardware.so 100644 root:root e5ab30fbc586209f133ce00369b6edf3 +File: /usr/lib/linuxcnc/modules/sim_encoder.so 100644 root:root fb26ba6ddd3895df3b3ce34335debe7a +File: /usr/lib/linuxcnc/modules/sim_home_switch.so 100644 root:root 16e5c969b488602c852f7fd65e2e0ce4 +File: /usr/lib/linuxcnc/modules/sim_matrix_kb.so 100644 root:root f718cb4425584cdd28ecbce7fe71f5a6 +File: /usr/lib/linuxcnc/modules/sim_parport.so 100644 root:root 9d40c705f206186980f2ad2a317abec5 +File: /usr/lib/linuxcnc/modules/sim_spindle.so 100644 root:root 607ca3a132e248160a7d1638041b4431 +File: /usr/lib/linuxcnc/modules/simple_tp.so 100644 root:root 63f6dac5be696879c3c1f7ad3d4495b5 +File: /usr/lib/linuxcnc/modules/sphereprobe.so 100644 root:root 595beb8a6fd257088da0103cb51d2815 +File: /usr/lib/linuxcnc/modules/spindle.so 100644 root:root 71fb2139b70bfb2ffdeeacf70220314d +File: /usr/lib/linuxcnc/modules/spindle_monitor.so 100644 root:root 3d11240f0f4638d991771eafba8dc9d4 File: /usr/lib/linuxcnc/modules/stepgen.so 100644 root:root 056e8904e04333754f3177f8beac03a8 -File: /usr/lib/linuxcnc/modules/steptest.so 100644 root:root d4ca88531ce42e611324f3d88aaaf89d -File: /usr/lib/linuxcnc/modules/streamer.so 100644 root:root 7ae55354057a693e97b250a737c4450f -File: /usr/lib/linuxcnc/modules/sum2.so 100644 root:root ea75efd5d428ca69367b858cc55d15b3 -File: /usr/lib/linuxcnc/modules/supply.so 100644 root:root 678d30051ce0492beca4f4f6aa01a22c -File: /usr/lib/linuxcnc/modules/thc.so 100644 root:root f8f9f9a9f71b7f29e3bce8bbd8960dd8 -File: /usr/lib/linuxcnc/modules/thcud.so 100644 root:root 074df780c64ff366bed8c4d635ebbb72 +File: /usr/lib/linuxcnc/modules/steptest.so 100644 root:root 24e39d9d8cad9a393ff5fa3098a62cd9 +File: /usr/lib/linuxcnc/modules/streamer.so 100644 root:root 67114cb02b67c59c7c9aaa555f3ed717 +File: /usr/lib/linuxcnc/modules/sum2.so 100644 root:root dc06f786dec330885fcef587d068a66a +File: /usr/lib/linuxcnc/modules/supply.so 100644 root:root 787da161af4e4920755bd18cba77f80c +File: /usr/lib/linuxcnc/modules/thc.so 100644 root:root 59e3e3b684f5790c77bf6b666e79185e +File: /usr/lib/linuxcnc/modules/thcud.so 100644 root:root 7759b199b1153520f5d362757a67bad3 File: /usr/lib/linuxcnc/modules/threads.so 100644 root:root b89e1adc049ee27b421a968bdc4f762e -File: /usr/lib/linuxcnc/modules/threadtest.so 100644 root:root ef9f3f134a44d79831814e658cd032ce -File: /usr/lib/linuxcnc/modules/time.so 100644 root:root d7a17bd2c984aab9ce3470441423f103 -File: /usr/lib/linuxcnc/modules/timedelay.so 100644 root:root 672471a9346e30c0ec7ea355689f3df7 -File: /usr/lib/linuxcnc/modules/timedelta.so 100644 root:root cad613bbe73abd32125d01b9d937887b -File: /usr/lib/linuxcnc/modules/tof.so 100644 root:root 3282f283b502ddf36bfae1b124b78f7c -File: /usr/lib/linuxcnc/modules/toggle.so 100644 root:root 3fadecb10738bea42260095d9aabb687 -File: /usr/lib/linuxcnc/modules/toggle2nist.so 100644 root:root 117e0decc9ca0f695795faa930a5ad3b -File: /usr/lib/linuxcnc/modules/ton.so 100644 root:root b2513f580941f311be4dd88aed04385d -File: /usr/lib/linuxcnc/modules/tp.so 100644 root:root cfa58f77b6d9b0cacf6d093981ba6c6c -File: /usr/lib/linuxcnc/modules/tpmod.so 100644 root:root f57520fd45f4c06fb51ddea378f09041 +File: /usr/lib/linuxcnc/modules/threadtest.so 100644 root:root cf2a567f72cd029ae4408247ac45015f +File: /usr/lib/linuxcnc/modules/time.so 100644 root:root a5f8d36b681a646d7192045ceb790cee +File: /usr/lib/linuxcnc/modules/timedelay.so 100644 root:root 4634a66adacbac791d2c2c4ded283a9e +File: /usr/lib/linuxcnc/modules/timedelta.so 100644 root:root 9754ab9cb0e7825d37fdaf9f98be4fd8 +File: /usr/lib/linuxcnc/modules/tof.so 100644 root:root f1b7fccab348ea66c636523f9c6b8257 +File: /usr/lib/linuxcnc/modules/toggle.so 100644 root:root 8e7b182f0aa84896edc68bbc40575a23 +File: /usr/lib/linuxcnc/modules/toggle2nist.so 100644 root:root 3f1caac5a4b8507047524343673f2884 +File: /usr/lib/linuxcnc/modules/ton.so 100644 root:root e8b817c26d615d744a6511141a84e124 +File: /usr/lib/linuxcnc/modules/tp.so 100644 root:root 6e30e7b2b75401111e75eba7400f1fdc +File: /usr/lib/linuxcnc/modules/tpmod.so 100644 root:root 81670ea4ffd6472c239f9437e39108c1 File: /usr/lib/linuxcnc/modules/tripodkins.so 100644 root:root 7dfcb3bb520fc5cdf0fa40931f46b1dd -File: /usr/lib/linuxcnc/modules/tristate_bit.so 100644 root:root b34d3b90fb592f8ebb7b689e031143a9 -File: /usr/lib/linuxcnc/modules/tristate_float.so 100644 root:root efc2ec50452468714e0cd2b3c44093c2 -File: /usr/lib/linuxcnc/modules/trivkins.so 100644 root:root 56b9741feb03e37dc38b9051f802421f -File: /usr/lib/linuxcnc/modules/updown.so 100644 root:root e24e42020a1f430e82105c6e52f3977a -File: /usr/lib/linuxcnc/modules/userkins.so 100644 root:root 5edd6c5763ee3c735912b98f80387857 +File: /usr/lib/linuxcnc/modules/tristate_bit.so 100644 root:root b787f2c4deeb11573246c3fb461ff133 +File: /usr/lib/linuxcnc/modules/tristate_float.so 100644 root:root 65c26f259e18b036465ed0eabd13759b +File: /usr/lib/linuxcnc/modules/trivkins.so 100644 root:root 28b4256f7c387c35f210eba2994a3287 +File: /usr/lib/linuxcnc/modules/updown.so 100644 root:root 2fd4ff8dc39b9519e5cfd70c726a89d1 +File: /usr/lib/linuxcnc/modules/userkins.so 100644 root:root d95470a651e521b48d86d707544ac84a File: /usr/lib/linuxcnc/modules/watchdog.so 100644 root:root 5a4b02c936646527ce03730a5dcf5319 -File: /usr/lib/linuxcnc/modules/wcomp.so 100644 root:root f9c0c37b79d4abd6ae91a489509d620b -File: /usr/lib/linuxcnc/modules/weighted_sum.so 100644 root:root 0dc1be4ae13dc6d9a04ff8be7c1aa5e2 -File: /usr/lib/linuxcnc/modules/xhc_hb04_util.so 100644 root:root dafb8e1fbb43efb46190d9c2c0b07b02 -File: /usr/lib/linuxcnc/modules/xor2.so 100644 root:root 5532f31e46fbddf26f22297db39a321c -File: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so 100644 root:root af198ccb19f4582f5cd450827536be4a -File: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so 100644 root:root 5f0401241ff2fbab28482d83ab27f640 -File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root d1cdb2118c02e7dbd5794856ed845ab8 -File: /usr/lib/linuxcnc/realtime 100755 root:root 8bf3265f86f125a6b6f709730da2bd59 +File: /usr/lib/linuxcnc/modules/wcomp.so 100644 root:root 84f177fad1faf24e5c05faf147127fdd +File: /usr/lib/linuxcnc/modules/weighted_sum.so 100644 root:root d1e185731432c727704fd84226eed4a5 +File: /usr/lib/linuxcnc/modules/xhc_hb04_util.so 100644 root:root ca9009f17762e909b1c3ed11d509ef46 +File: /usr/lib/linuxcnc/modules/xor2.so 100644 root:root d21d5ce5581e910c44bbff80ff257c49 +File: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so 100644 root:root b4193a7860e8c25d219d5f2236db9b39 +File: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so 100644 root:root 4ba477950d703b505d41aac9ceae6d7d +File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root 43f345c2ed09f543a9e08debcbac1505 +File: /usr/lib/linuxcnc/realtime 100755 root:root d43fa6454e0ace8a9dee77e958c92805 File: /usr/lib/python3/site-packages/__pycache__ 40755 root:root @@ -7434,7 +7434,7 @@ File: /usr/lib/python3/site-packages/__pycache__/vismach.cpython-312.pyc 100644 root:root 87e37d0df0118a4eddcdcf8383809db4 -File: /usr/lib/python3/site-packages/_hal.so 100644 root:root c5c7672cef54cf5366a5da146761ca02 -File: /usr/lib/python3/site-packages/_togl.so 100644 root:root 80bf665b5f68c4b031e8ece04dbc4c94 +File: /usr/lib/python3/site-packages/_hal.so 100644 root:root ab1545618e643fa88ed82678985dd35b +File: /usr/lib/python3/site-packages/_togl.so 100644 root:root 6950df47c5569cc8d2f6553e47692c79 File: /usr/lib/python3/site-packages/bitfile.py 100644 root:root ba4c87be0324d9f0c6de2b1ef31a1386 File: /usr/lib/python3/site-packages/bwidget.py 100644 root:root 6d79baa8828cf017d09cb36a63d4f56a -File: /usr/lib/python3/site-packages/gcode.so 100644 root:root b15c1ba7cd26bfb783a320ccf1da7488 +File: /usr/lib/python3/site-packages/gcode.so 100644 root:root b56b88f8624f8b3d58580a035c54bd18 File: /usr/lib/python3/site-packages/gladevcp 40755 root:root @@ -7650,5 +7650,5 @@ File: /usr/lib/python3/site-packages/hershey.py 100644 root:root ee809a426465015ba37b8c97a7c5634e -File: /usr/lib/python3/site-packages/lineardeltakins.so 100644 root:root 00bc6ca4d681d97ebe897fb059415b0e +File: /usr/lib/python3/site-packages/lineardeltakins.so 100644 root:root 221d28de4c7c0d8ca37cbb8ba4be9d02 File: /usr/lib/python3/site-packages/linux_event.py 100644 root:root 3493c80b88f05285fe1312e2000b3936 -File: /usr/lib/python3/site-packages/linuxcnc.so 100644 root:root c2fde8f6767ee410c9fc0a9f365a5575 +File: /usr/lib/python3/site-packages/linuxcnc.so 100644 root:root 7be411dfd67305f7eec86261f473eeee File: /usr/lib/python3/site-packages/linuxcnc_util.py 100644 root:root bf59611aa57cf48d5aafca44e80552f8 @@ -8486,3 +8486,3 @@ File: /usr/lib/python3/site-packages/qtvcp/widgets/xembed.py 100644 root:root 8c8ad7b44becafb37824081fcde05c55 -File: /usr/lib/python3/site-packages/rotarydeltakins.so 100644 root:root 02b8e004f5bbb528d0bdcbf6bf11fbe9 +File: /usr/lib/python3/site-packages/rotarydeltakins.so 100644 root:root 7c760b8599c04242087d818c80bb6d4f File: /usr/lib/python3/site-packages/rs274 40755 root:root @@ -8581,5 +8581,5 @@ File: /usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl 100755 root:root 265ab238f1035e042f41fe5d3c74ccd7 -File: /usr/lib/tcl/linuxcnc/hal.so 100644 root:root cddb66010638212c0a531bd18b7e4ce1 +File: /usr/lib/tcl/linuxcnc/hal.so 100644 root:root c85f5dcc61614ace712f8127cdb5a3fa File: /usr/lib/tcl/linuxcnc/halshow_icon.png 100644 root:root 0cfc3902d5129e77b30673cdfa0f1a35 -File: /usr/lib/tcl/linuxcnc/linuxcnc.so 100644 root:root 9a838bc9de754124ad2e92fd0b53fcf3 +File: /usr/lib/tcl/linuxcnc/linuxcnc.so 100644 root:root 01dbaef36b071ff51b7ffcb54dd856ad File: /usr/lib/tcl/linuxcnc/linuxcnc.tcl 100755 root:root fe2680d1a86108e9a8f65b16e190eddd @@ -12366,3 +12366,3 @@ File: /usr/share/man/man1/panelui.1.xz 100644 root:root 61f547f5665fc80d03da476743e17d4d -File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 46855fc76f9b908fe7f359c59186ceff +File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 3110d436b1544af0ee4e899a4d2b69f7 File: /usr/share/man/man1/pmx485-test.1.xz 100644 root:root 20b815b28f4df48358282e8d88b3a0fa @@ -12395,3 +12395,3 @@ File: /usr/share/man/man1/teach-in.1.xz 100644 root:root fc226b9d2b564e3fad4c5ff0b945c813 -File: /usr/share/man/man1/thermistor.1.xz 100644 root:root c249aeedfcceb9edd7647a0e075136b2 +File: /usr/share/man/man1/thermistor.1.xz 100644 root:root b5a3f4e8148ba7e8f0af91bfd89ff408 File: /usr/share/man/man1/tooledit.1.xz 100644 root:root c7d86f1ec43340e80f69de9a88166fd8 @@ -12401,3 +12401,3 @@ File: /usr/share/man/man1/vfs11_vfd.1.xz 100644 root:root 65395473fdddbe5a7f8789b49d8b6b37 -File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root 5d89341e41a353325d5b5e8ef012db31 +File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root 55b0a5767619e6ad5895afba3d7e63b7 File: /usr/share/man/man1/xhc-hb04-accels.1.xz 100644 root:root 0cff8637e027604edb6d81ff9beaa4ff @@ -12522,44 +12522,44 @@ File: /usr/share/man/man3/undocumented.3rtapi.xz 100644 root:root 002b721b89292b438d9dbf89f1ff823b -File: /usr/share/man/man9/abs.9.xz 100644 root:root 759af91fe344a4ba3c720c1906a441f5 -File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root 1bd84cdf92211f3a13c9bde03db4650d -File: /usr/share/man/man9/and2.9.xz 100644 root:root f37ef7d0d0473fa4890f19dc836db900 -File: /usr/share/man/man9/anglejog.9.xz 100644 root:root f8c216b05006f206e24aff6c4324d629 +File: /usr/share/man/man9/abs.9.xz 100644 root:root 7fe77ee910d08eb288d7966cc3e4a66f +File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root e99953d35467a7b6395be8c17d28d599 +File: /usr/share/man/man9/and2.9.xz 100644 root:root 42515beb918ec03a915c111c49f4d1df +File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 58ae7f1da271026c89eda2b1c4e8f5e8 File: /usr/share/man/man9/at_pid.9.xz 100644 root:root d578fa506b91fa3aa94136679b39f656 File: /usr/share/man/man9/axis.9.xz 100644 root:root f688c161a447b4d64af5406eaa4b3c09 -File: /usr/share/man/man9/axistest.9.xz 100644 root:root 72092b758d7b4e299cf5726b2ed9a442 -File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 4b0bed38572e502c17811a3ef25f2b5e -File: /usr/share/man/man9/biquad.9.xz 100644 root:root 42eaf06a482cb7c402209d1570dd2a81 -File: /usr/share/man/man9/bitslice.9.xz 100644 root:root f0a4325837d4927168d922c9019700d7 -File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 519ee07bfa47c66e78127ab859e25b77 -File: /usr/share/man/man9/bldc.9.xz 100644 root:root a49b37f953f5ddb34ed2d3e89a0e14f0 -File: /usr/share/man/man9/blend.9.xz 100644 root:root fa5332f5f5da20239679f960ae5852c2 -File: /usr/share/man/man9/carousel.9.xz 100644 root:root 54c195bd7121215a9a1b7dd964334db6 -File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root f70732c34f809fb170a610bafb9cea19 -File: /usr/share/man/man9/clarke2.9.xz 100644 root:root 3f8f570a9e2ef0d872b28cfe754bc1d0 -File: /usr/share/man/man9/clarke3.9.xz 100644 root:root 0232235633de7ffa36dbc8f0f890e3fd -File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root eb6aa63b529d86e9c73f988197ddf544 +File: /usr/share/man/man9/axistest.9.xz 100644 root:root 93a35e1937fd68e5d587fe51f1e12091 +File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 2194d7dfed8170708dfd5c4f7c2a531f +File: /usr/share/man/man9/biquad.9.xz 100644 root:root 70195b960d422a271d5f5b5da02588be +File: /usr/share/man/man9/bitslice.9.xz 100644 root:root ac9265ace162787f61ed05e69b50b9b2 +File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 181c262233d5691bb187a60213f42a5e +File: /usr/share/man/man9/bldc.9.xz 100644 root:root 622920e2a1b924b250a295f925072085 +File: /usr/share/man/man9/blend.9.xz 100644 root:root c6961b3957728ca6861c1e4774bc44e3 +File: /usr/share/man/man9/carousel.9.xz 100644 root:root aeb71bb6abc28a9e2f9eb00cf8fbce5b +File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root a41c15bccbece07115a6810dd5c0105b +File: /usr/share/man/man9/clarke2.9.xz 100644 root:root ace50442e072a43dd42c3903ed33d271 +File: /usr/share/man/man9/clarke3.9.xz 100644 root:root ab602d1299cb2f1cbcf1423cd35bdcbc +File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 892387ca30d03af16dfa4691949aa83e File: /usr/share/man/man9/classicladder.9.xz 100644 root:root 0a15b834496451ff9a41f7297f36b0f0 -File: /usr/share/man/man9/comp.9.xz 100644 root:root 2f5ecb5e0048df9b0c5e9c34c9d3b819 -File: /usr/share/man/man9/constant.9.xz 100644 root:root 137bb0571d7adfdd568c5277b800c33a -File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 133f7fad8f7bd9cdcc9d94a720218019 -File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root 06bb832d76d9e32f917682f9f835dadc -File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 26b20d4671807896d182886ab0038bbd -File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 56caedfe617da590980a4ff052340204 -File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root 45652eb71aa0458e24d2cfb3c2200517 -File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 8ea6f092e22309efbf41a9000fd0fe9f -File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 4b478ae733d1b0b3c51bec26199997b7 -File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root 3354f594205487d5e0f914d065979756 -File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root f19f03ac0bde911309090a2a1ffbc6cd -File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 3d460a517557e499cc3a2ab57894547e -File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 3d433e5d3bbded844feb49d6ae90226a -File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root d1d7e09d4049f7ac1755dbd3a98c9312 +File: /usr/share/man/man9/comp.9.xz 100644 root:root 9f73ba562a2360a887012d31462c2b2d +File: /usr/share/man/man9/constant.9.xz 100644 root:root 73b8f1f9d574d20b1d1e7192cab63c4d +File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 76a75643d429a422b1207edc4aed8915 +File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root e025f99263f1ceb474985b5e1e10de55 +File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 6c889a773ee3f18e8868b8521abb050d +File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root bdc2b0937143bf2bfb9c1a66bd89ddf2 +File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root b528781ad511c4cda56284a7c4bb75a8 +File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root cfbce6f582f1f8ac3f606db74c3e74b4 +File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 8407ca696e1358aaf08c33dbf7296713 +File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root adea89473c9f7071931dd403dcff98a3 +File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root 2dedcdd11ffaa362434c3189a02f2cd0 +File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root ebd29b34b842314330a8989d6147afb4 +File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root af77856f7fbcb69c91027254bcde1ba3 +File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root 7df4172ba507d2849137f6d5a4e5c839 File: /usr/share/man/man9/counter.9.xz 100644 root:root 83f81a48047a93aac54a70c298a8b8ee -File: /usr/share/man/man9/dbounce.9.xz 100644 root:root a41ce16e0aba57682076567b5f835d4c -File: /usr/share/man/man9/ddt.9.xz 100644 root:root 05fb227dbb977b863a16d8103fe13799 -File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 88c9ddee3a253f42b5d0b0cc83cbe3e4 +File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 0581e255306c85edcfdc0bf0e900bdf9 +File: /usr/share/man/man9/ddt.9.xz 100644 root:root 90c45dc8e0e07fa66a82222b49552182 +File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 6eee22cedb6c0e1c02c2c4a3b1b03012 File: /usr/share/man/man9/debounce.9.xz 100644 root:root bd2406b69a89bf1c3ef92b42bfe93f3d -File: /usr/share/man/man9/demux.9.xz 100644 root:root d6bbb72b10bd104bdc940180842b16e2 -File: /usr/share/man/man9/differential.9.xz 100644 root:root 566c8294c083525e54ed1bd61483bfb7 -File: /usr/share/man/man9/div2.9.xz 100644 root:root afe2c003441f564765f9eb122b218da0 -File: /usr/share/man/man9/edge.9.xz 100644 root:root 4d87c60512e2f589027d654f4d709bfd +File: /usr/share/man/man9/demux.9.xz 100644 root:root f268142b2f7a688a2252537584d2c987 +File: /usr/share/man/man9/differential.9.xz 100644 root:root 0c4816dd4d3c0f42ef58929c805870b7 +File: /usr/share/man/man9/div2.9.xz 100644 root:root a0f31400d5049ba2c19999f97abfadbe +File: /usr/share/man/man9/edge.9.xz 100644 root:root 96f13a65eafe80ada557b6d34c30bf51 File: /usr/share/man/man9/encoder.9.xz 100644 root:root 12631bc793eb57261edeccfb1868447a @@ -12567,10 +12567,10 @@ File: /usr/share/man/man9/enum.9.xz 100644 root:root 62f690eb508746219767ca8b28c87f7d -File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root b749f089a5aac526b03af5490faf2cc4 -File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 21f0ccc2a6d20b3b87e043bfb7bc9a8a -File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 33ee876dfad891f1df0f69464e4bda86 -File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 8e47baca1e1da571864b0fa2f8e229c4 -File: /usr/share/man/man9/flipflop.9.xz 100644 root:root d298b8c1cc6c880411ccef52fc33da22 -File: /usr/share/man/man9/gantry.9.xz 100644 root:root 25a85b3ad17308e320e1d29c5d521f49 +File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 27085331eb71d54b16ce40d3e32fd929 +File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 669003ff4dc6d3ce8e8a905e0a55b403 +File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 59b61fb8f217dce823a3ae18dc46c3d5 +File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 38bf99078020b93a2513b5592163441d +File: /usr/share/man/man9/flipflop.9.xz 100644 root:root 53b24e5349c417c4bcc42e2d7d34038e +File: /usr/share/man/man9/gantry.9.xz 100644 root:root 65e8110a36ce5cb064796093a7ea9d3e File: /usr/share/man/man9/gantrykins.9.xz 100644 root:root a388b2c041c10d2e154213b6a190d69e -File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 8b68b23b8a6976ff1e5f39eb9ac0e73b +File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 860f41487a62f517f9f649214a083d45 File: /usr/share/man/man9/genhexkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12579,6 +12579,6 @@ File: /usr/share/man/man9/gladevcp.9.xz 100644 root:root 26d85cce38cef8e5cee1a6845d897b4d -File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 8803dbf5e69e37bcbc64e6e3ccd861c9 +File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root c475afa0040104292a1f5b3fb538fd6e File: /usr/share/man/man9/hal_bb_gpio.9.xz 100644 root:root b8610c3245eb6a6a34b2071dae79effe File: /usr/share/man/man9/hal_parport.9.xz 100644 root:root 0e9862dfa7a66f23eff384631bc10a25 -File: /usr/share/man/man9/histobins.9.xz 100644 root:root 65d3a31ed8cb03c8ce07de9c9062ed1d +File: /usr/share/man/man9/histobins.9.xz 100644 root:root 17081698f1bdec2b380ae58f415e32f7 File: /usr/share/man/man9/hm2_7i43.9.xz 100644 root:root ec628cb4aadd965825a78075995c1e2e @@ -12589,54 +12589,54 @@ File: /usr/share/man/man9/hm2_spi.9.xz 100644 root:root 382b4ac9c860f7945c061b1e9bd15cdf -File: /usr/share/man/man9/homecomp.9.xz 100644 root:root f66411e52590d60cb34dad094662bb6d +File: /usr/share/man/man9/homecomp.9.xz 100644 root:root b0a6b177878b04248decb3b3ed0aab9c File: /usr/share/man/man9/hostmot2.9.xz 100644 root:root d4a99f7e9fbf5d0510c3b817a2c6756b -File: /usr/share/man/man9/hypot.9.xz 100644 root:root 2a87ac06df2eed866781d0595f5d606d -File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root e82cc7a2a99923ba1b8e43160ef83ab4 -File: /usr/share/man/man9/integ.9.xz 100644 root:root 4fafaf5a325bbfcf3062ef46607bd65c -File: /usr/share/man/man9/invert.9.xz 100644 root:root 4ee5306d15e562b2f9530d5f606a663e -File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root 9f70f9d8c9e94a174e35957d027f4bc9 +File: /usr/share/man/man9/hypot.9.xz 100644 root:root 7ce928b9eabf11cb644c34c82d531d6e +File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 069b2842f5cae490f7eee7f8918d71f1 +File: /usr/share/man/man9/integ.9.xz 100644 root:root 9b96d6a659dd22ab8d3ad6fe539d4773 +File: /usr/share/man/man9/invert.9.xz 100644 root:root 26e88c7b25c3163a2d2079088dde5a17 +File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root d89dcf9a9fad9203cf5b039cca09d259 File: /usr/share/man/man9/kins.9.xz 100644 root:root 7ef613a8265b032556c4e99f80eeee38 -File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 585aeeec5245cf62d1ccba74f1b0a284 -File: /usr/share/man/man9/latencybins.9.xz 100644 root:root cd6fb2924e7383c8fc8341b09b70beba +File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 968833f428416d322e40a55942212598 +File: /usr/share/man/man9/latencybins.9.xz 100644 root:root c2474b3b26e2ea1d34b86707afd02e77 File: /usr/share/man/man9/lcd.9.xz 100644 root:root 620cc2889dca47fa4e7586ff480ba974 -File: /usr/share/man/man9/limit1.9.xz 100644 root:root 922030939eefddbacebb36f120a0ddcd -File: /usr/share/man/man9/limit2.9.xz 100644 root:root ebe437f207abc977dd751ba1fa35c9ac -File: /usr/share/man/man9/limit3.9.xz 100644 root:root d5b1f4adef08a0cfc4acdf3ae6289617 -File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root 707bdbad2bfe93e408fadcb7e6164e4e -File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 514532f47b063e89837ea0ef2bd23d1d +File: /usr/share/man/man9/limit1.9.xz 100644 root:root 03e956dd26c3d724d4a17aaae8b48626 +File: /usr/share/man/man9/limit2.9.xz 100644 root:root 2511dca6eeb10830f81e34da5781e14c +File: /usr/share/man/man9/limit3.9.xz 100644 root:root 52c9db9b469fb0dcc2341f22ae88f660 +File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root bbb39fcb74dc0bfc57e7e4d3a9c1c190 +File: /usr/share/man/man9/lincurve.9.xz 100644 root:root dcbbfa7d3b0c855bff615c85fbf9e4a5 File: /usr/share/man/man9/lineardeltakins.9.xz 100644 root:root ce6ac2a9983a327635ddcd90d0e26def -File: /usr/share/man/man9/logic.9.xz 100644 root:root c5970ec7507aa3fe15c96920ec86d9da -File: /usr/share/man/man9/lowpass.9.xz 100644 root:root a470de390e21eacbbe0fc15be66800bc -File: /usr/share/man/man9/lut5.9.xz 100644 root:root 9ce366b41ebd29ebdc05289c21013b92 -File: /usr/share/man/man9/maj3.9.xz 100644 root:root 2f0f41ba579c18fc97bdb61108c903fa -File: /usr/share/man/man9/match8.9.xz 100644 root:root 4215e86a3982c3169672c113e09d7916 +File: /usr/share/man/man9/logic.9.xz 100644 root:root 587fb44bb27429ee0933c29cb6489382 +File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 8d1f7d573e6b249679b8884a93626861 +File: /usr/share/man/man9/lut5.9.xz 100644 root:root 2d6ca0fce4b194ae8f025de804ac5518 +File: /usr/share/man/man9/maj3.9.xz 100644 root:root dd443634807c5e2d5af6b1301043f1c6 +File: /usr/share/man/man9/match8.9.xz 100644 root:root 236e0de54b6433a981bc2f9c12a1d603 File: /usr/share/man/man9/matrix_kb.9.xz 100644 root:root 339c35c251b89cbdb7a0e83bce7035d9 -File: /usr/share/man/man9/max31855.9.xz 100644 root:root ac2ad93876a15073e8c67f3e845e7ed2 +File: /usr/share/man/man9/max31855.9.xz 100644 root:root f46e884292b3f413b199ebdfdb052b2c File: /usr/share/man/man9/maxkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root a9ea9334062ca20427f510e3eb9819d3 -File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root fe9d682d1681394f69e94143549641f0 -File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root a4e15ca46febe15488eed3190e2fdaae -File: /usr/share/man/man9/message.9.xz 100644 root:root d16f0b79d1cc91a5fd31137520933f5f -File: /usr/share/man/man9/millturn.9.xz 100644 root:root 005313a21ceccac99bab17f46d60ebe7 -File: /usr/share/man/man9/minmax.9.xz 100644 root:root 7969869dff50318cbd17b91be696ad94 +File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root 2013219863e4564330d2bfdc50be6982 +File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root 5d0a94debb4b7008deff4e6c978ff8cc +File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 4742dc1c84dbbd44e72b9fd4cd293c7d +File: /usr/share/man/man9/message.9.xz 100644 root:root 1539aa82bf0a39c9661cb4756ce15970 +File: /usr/share/man/man9/millturn.9.xz 100644 root:root ead87d9292b38afbb63221a7cfa15343 +File: /usr/share/man/man9/minmax.9.xz 100644 root:root 601a066d09ea1aa139e38318023fb44f File: /usr/share/man/man9/motion.9.xz 100644 root:root 764260411c102c5aae03e9a6e6c224cf -File: /usr/share/man/man9/moveoff.9.xz 100644 root:root fb455caf53d74781649265080c35aa39 -File: /usr/share/man/man9/mult2.9.xz 100644 root:root 488263e846a07282f16b563754264873 -File: /usr/share/man/man9/multiclick.9.xz 100644 root:root 4a52d0df0a1a08e95ecc61d205cab473 -File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 2b32294ec3350ebd36917570d834fe7c -File: /usr/share/man/man9/mux16.9.xz 100644 root:root b3009402755da255fa865815f0c59443 -File: /usr/share/man/man9/mux2.9.xz 100644 root:root e31c15f0ea77cafb6e24d34f3c25fae4 -File: /usr/share/man/man9/mux4.9.xz 100644 root:root 88b5e87f274ec820968a29839e93f65f -File: /usr/share/man/man9/mux8.9.xz 100644 root:root 7d5adb696e55a1329534ac0e5f1fa784 +File: /usr/share/man/man9/moveoff.9.xz 100644 root:root 95b6d2632fb40c0aa90bd72fa18189e9 +File: /usr/share/man/man9/mult2.9.xz 100644 root:root ed483378e7d34ec326905f3968cf3abb +File: /usr/share/man/man9/multiclick.9.xz 100644 root:root 7f554a3b84e97acae01fdbcb532aea14 +File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 6d4dd2b4d638b12ac4fce0f1367218c7 +File: /usr/share/man/man9/mux16.9.xz 100644 root:root e45078ebabd32b521a6a634a7c99009b +File: /usr/share/man/man9/mux2.9.xz 100644 root:root 161d4003d0fbc3ebd8bc76432975c96e +File: /usr/share/man/man9/mux4.9.xz 100644 root:root 993a2b78edf4dfbd5785e12f4aadf20b +File: /usr/share/man/man9/mux8.9.xz 100644 root:root 6607a5083f1d5960030a2012a3b2f5a9 File: /usr/share/man/man9/mux_generic.9.xz 100644 root:root 81ed0423e2b5c893c152d9ed4491b0f5 -File: /usr/share/man/man9/near.9.xz 100644 root:root 001471b21b34a64fdada76f9dd8ee3d7 -File: /usr/share/man/man9/not.9.xz 100644 root:root 001adb30f2ff4a3a208ea6785c7aaab9 -File: /usr/share/man/man9/offset.9.xz 100644 root:root 7e37dc0e41b3ab22e18d0e8731358891 -File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 2d298d0a1a6a0a816c9493ea4b670701 -File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 46ad125aca13b2fb5164270d69069f79 +File: /usr/share/man/man9/near.9.xz 100644 root:root 1530284b186418d9f6225ce37bb49128 +File: /usr/share/man/man9/not.9.xz 100644 root:root b4b294951aab927b10b9ecf0d1a1deb5 +File: /usr/share/man/man9/offset.9.xz 100644 root:root 4ca9921aff0b69795d619fa290f08664 +File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 329a92501b3e58a8da3207eb959858d9 +File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 57d6cd3e14c871a70a3b2d81f351fcfb File: /usr/share/man/man9/opto_ac5.9.xz 100644 root:root ed6aa04a42b4697aea2bc5fc7de8500a -File: /usr/share/man/man9/or2.9.xz 100644 root:root a8d161fc69d312a5ca4a818528b87093 -File: /usr/share/man/man9/orient.9.xz 100644 root:root 6aa81906ebc2de2e28af801f7c3767c6 +File: /usr/share/man/man9/or2.9.xz 100644 root:root 1c4b40bbeb67ece098de8437d21c66d2 +File: /usr/share/man/man9/orient.9.xz 100644 root:root 18e99d7f4b434d0e758b737c3b989106 File: /usr/share/man/man9/pentakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 File: /usr/share/man/man9/pid.9.xz 100644 root:root 9106a5d37a8880989de46921cdb78588 -File: /usr/share/man/man9/plasmac.9.xz 100644 root:root 77bd33703e525313d4d302994bd445b2 +File: /usr/share/man/man9/plasmac.9.xz 100644 root:root faad10b5d1aa7d4bf9381741c91673b1 File: /usr/share/man/man9/pumakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12645,52 +12645,52 @@ File: /usr/share/man/man9/rotatekins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 2cf30a070b895696bd9fd2d38aafcf46 +File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 4502567d3215d89367ee5829a46a30a4 File: /usr/share/man/man9/sampler.9.xz 100644 root:root 713192b4e67ac75366e7848681137025 -File: /usr/share/man/man9/scale.9.xz 100644 root:root d25bbcb967352797b1ec44211ecf12c7 -File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root c2d298d3f96552d4615df0ce33b2415c +File: /usr/share/man/man9/scale.9.xz 100644 root:root 4be512c9a1874c2a275e81b4f0d15d62 +File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 06ce0b0a68b398246e457eb13ae6daa3 File: /usr/share/man/man9/scarakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/select8.9.xz 100644 root:root d00d64ca300e50734ed01406163036af -File: /usr/share/man/man9/serport.9.xz 100644 root:root 3074dd343d16e1d625ae51aad2bd657a +File: /usr/share/man/man9/select8.9.xz 100644 root:root 538f193328c676eb00fff000decd5331 +File: /usr/share/man/man9/serport.9.xz 100644 root:root 957c174cd15f698314292801c16241aa File: /usr/share/man/man9/setsserial.9.xz 100644 root:root a0c4c6061b229bf1b0bd7b45aa0a6d1b File: /usr/share/man/man9/siggen.9.xz 100644 root:root bb8a58ed0261c53246a616a6e5859857 -File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 28f5b4daab3f69cf34c64927fc5ca1dd +File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 28c5b4d93a300dd60b4df417f163eab1 File: /usr/share/man/man9/sim_encoder.9.xz 100644 root:root 1061200399dc5f45100c0b9ac0b34ddc -File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root ac876a995b4fa3a85f41cb24dd052627 -File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root ddb39a8b72d6f398f0633f3574289a0c -File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root e98943de5dfab9680e0df814df4000ea -File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 1a220abbfe706d50c5c9aea4253f9aea -File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 518328da8353421377dd7cedc0a606b2 -File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root a382d37b65120522e05dd73b098c37ce -File: /usr/share/man/man9/spindle.9.xz 100644 root:root 69dda9c80cc7736591629e0067248703 -File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 0fae231142e0fee160001fffaf7df9d9 +File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 77177c84c94f1527d0fe4c88803c4409 +File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root 497bfcd2cc009d50dcdc627f991ec34e +File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 92b44fb8a349334ad6a0069ca9868aca +File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root bf25ef56c51b9d82be92663ae8d31b33 +File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 61737495518491bc34b4ed40ce3692c9 +File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 7661831afcbbc31dfdd61ce59f33162c +File: /usr/share/man/man9/spindle.9.xz 100644 root:root 1cbf46997de4f0a1889063a6aca70e64 +File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root cba144a21546a2a4a45c4577ac1f4ca6 File: /usr/share/man/man9/sserial.9.xz 100644 root:root cda27ad79b3b748fe69d3aa6133dbdf9 File: /usr/share/man/man9/stepgen.9.xz 100644 root:root 1151c7075a51ad05e9e82ff643cce6a9 -File: /usr/share/man/man9/steptest.9.xz 100644 root:root 3276753fdba9c42f090c968b00e4c5ed +File: /usr/share/man/man9/steptest.9.xz 100644 root:root 8640f01e1b9ff0f48be8de5996a1fb7c File: /usr/share/man/man9/streamer.9.xz 100644 root:root 49ec8c08805e0a7e32ba8ab4ab834b61 -File: /usr/share/man/man9/sum2.9.xz 100644 root:root 799790df0d5f28829f669b94c2056d30 +File: /usr/share/man/man9/sum2.9.xz 100644 root:root b40540c7de07073bc791076b1ee2d83c File: /usr/share/man/man9/supply.9.xz 100644 root:root 760e3e6615392513db8cc348d9c1147b -File: /usr/share/man/man9/thc.9.xz 100644 root:root 96a2bef9c155b132a134765eb9cb9c34 -File: /usr/share/man/man9/thcud.9.xz 100644 root:root 1aff384e4bd96ac5aaf0afd7d778376e +File: /usr/share/man/man9/thc.9.xz 100644 root:root 718ac75c397998353e67d7c1475495f7 +File: /usr/share/man/man9/thcud.9.xz 100644 root:root 99c9314347a53575a12f677508518d11 File: /usr/share/man/man9/threads.9.xz 100644 root:root 0a89f5af89b5cdf6d132fcfb19ba8726 -File: /usr/share/man/man9/threadtest.9.xz 100644 root:root 7ac250e9c9eb8d34f571f9553a23afa3 -File: /usr/share/man/man9/time.9.xz 100644 root:root 4e991bc8cff30c59cac3a8e3982814bc -File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 2cd066d146575a0105dd132991f25109 -File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 5ad85718bb2cf4aaf42d258a3be97d13 -File: /usr/share/man/man9/tof.9.xz 100644 root:root a381774e4bf36fbb1cda3ed23349d9cc -File: /usr/share/man/man9/toggle.9.xz 100644 root:root 1fd1b290091865907aca3baf4bfe33e3 -File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 2ee1da8c2f78d5f0414a87befa075398 -File: /usr/share/man/man9/ton.9.xz 100644 root:root fe451162800e2ced8aa2fb9f78ceb793 -File: /usr/share/man/man9/tp.9.xz 100644 root:root 249655af481f6ca7013709d88fd847a8 -File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 755caea532f5f388a7d57593c0a39775 +File: /usr/share/man/man9/threadtest.9.xz 100644 root:root adfbb8da300934b5123beb88a4a4c888 +File: /usr/share/man/man9/time.9.xz 100644 root:root c508615ebe43bd968fe350dff23be6b4 +File: /usr/share/man/man9/timedelay.9.xz 100644 root:root ef534e640f362d73f6f2aa4cd22201a9 +File: /usr/share/man/man9/timedelta.9.xz 100644 root:root a1ca1de66c52f5b3560b594a7eee2408 +File: /usr/share/man/man9/tof.9.xz 100644 root:root 053776e7fdff3045427194788c93f015 +File: /usr/share/man/man9/toggle.9.xz 100644 root:root e1168d6852339940a91cb21a43a14b2d +File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 62399b723bf452d8fd7c0c747b1e9598 +File: /usr/share/man/man9/ton.9.xz 100644 root:root 0301caff28cc4b8f85b72f5013f89fa5 +File: /usr/share/man/man9/tp.9.xz 100644 root:root d00a32c6bfa906e9a76f6d90900f6cc6 +File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 207d7cca060afd4f49aef48aca06dac5 File: /usr/share/man/man9/tripodkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 3e01cd25af826c8cb4e69e458770164f -File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root ac7a5be5cd39c33cab8e1841069d586f +File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 57c3b7406d9d6f9cdc06b777c9c0e7f3 +File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root f30417ceb064a96bf57b43c47cf4bf2c File: /usr/share/man/man9/trivkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/updown.9.xz 100644 root:root 47cb1348e86ec96ae279c8c64017dcfa -File: /usr/share/man/man9/userkins.9.xz 100644 root:root e336c96b04ea3d37a1bce99e71d54481 +File: /usr/share/man/man9/updown.9.xz 100644 root:root c7f9d5f2e681a7d43a525c948054766d +File: /usr/share/man/man9/userkins.9.xz 100644 root:root 4d72907497839ff16c178db6bb049148 File: /usr/share/man/man9/watchdog.9.xz 100644 root:root 3ccf8bb1e89f95bd9212dab04d95b193 -File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 4a5c2700bc3f35a5a3944990239bd1b7 +File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 8eb070dc3148b0fa743e4e2139bbe8c9 File: /usr/share/man/man9/weighted_sum.9.xz 100644 root:root eb6db3b792484b220170ad1fd6fce770 -File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 39475b542026880e582a247c93967a51 -File: /usr/share/man/man9/xor2.9.xz 100644 root:root 30ca3f2edc9075de184c1ed4321c9a28 -File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root 36da3190db1790a0226afa1a1dfea556 +File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 9d997eb0729ca199e80d3bb75c179a6c +File: /usr/share/man/man9/xor2.9.xz 100644 root:root 1d3bf7ed62fa53714c8472804a9b1494 +File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root 07eafb2e86e793dc0d8a1c41c6c5f9f7 File: /usr/share/qtvcp 40755 root:root @@ -13648,2 +13648,2 @@ File: /usr/share/qtvcp/widgets_ui/virtual_keyboard.ui 100644 root:root e757c13d9a96b2fb641409c70442ded6 -RPMIdentity: 90006761a5fc080f96fa72beea330ec87d289cd1b5d744d5468c6cb27cd3bd857a411c855cda1791dcaa95b0c04639fe4cdb00af6b016c1fbe8e831d55f1de49 +RPMIdentity: 64d0af4fc72afcc3db0a0c00aaf110b8754dc8ea68b7280d1a66ff714080b53000d4bca5c4f5458a7043c5b15f778c6ed34e243f51c86e53db102d3f0cd471dc --- linuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm.repo 2024-04-26 18:47:43.000000000 +0000 +++ linuxcnc-debuginfo-2.9.2-alt4.20240203.i586.rpm.hasher 2024-05-11 08:10:06.790482801 +0000 @@ -1,80 +1,78 @@ -/usr/lib/debug/.build-id/01 40755 root:root -/usr/lib/debug/.build-id/01/24c07b454b8f747e74de546306280a89f38de9 120777 root:root ../../../linuxcnc/modules/abs.so -/usr/lib/debug/.build-id/01/24c07b454b8f747e74de546306280a89f38de9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs.so.debug /usr/lib/debug/.build-id/02 40755 root:root -/usr/lib/debug/.build-id/02/201e8930722adbe86d2fead2ce95798a591ae8 120777 root:root ../../../linuxcnc/modules/anglejog.so -/usr/lib/debug/.build-id/02/201e8930722adbe86d2fead2ce95798a591ae8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/anglejog.so.debug -/usr/lib/debug/.build-id/02/350c6ff7522264003bc9e4c8cf3d4db9724826 120777 root:root ../../../linuxcnc/modules/thc.so -/usr/lib/debug/.build-id/02/350c6ff7522264003bc9e4c8cf3d4db9724826.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thc.so.debug +/usr/lib/debug/.build-id/02/3bb962b4c9d73a2c09acda0f77f8110b0bf87c 120777 root:root ../../../../bin/milltask +/usr/lib/debug/.build-id/02/3bb962b4c9d73a2c09acda0f77f8110b0bf87c.debug 120777 root:root ../../usr/bin/milltask.debug +/usr/lib/debug/.build-id/05 40755 root:root +/usr/lib/debug/.build-id/05/38d7f474266b2bc9334b270113acab45843c96 120777 root:root ../../../linuxcnc/modules/near.so +/usr/lib/debug/.build-id/05/38d7f474266b2bc9334b270113acab45843c96.debug 120777 root:root ../../usr/lib/linuxcnc/modules/near.so.debug +/usr/lib/debug/.build-id/05/b3be53b6e11cb208b92fb40bcf34d63b107521 120777 root:root ../../../linuxcnc/modules/timedelay.so +/usr/lib/debug/.build-id/05/b3be53b6e11cb208b92fb40bcf34d63b107521.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelay.so.debug /usr/lib/debug/.build-id/06 40755 root:root -/usr/lib/debug/.build-id/06/60962c955c69faea26b008906ed07fe7b59395 120777 root:root ../../../linuxcnc/modules/demux.so -/usr/lib/debug/.build-id/06/60962c955c69faea26b008906ed07fe7b59395.debug 120777 root:root ../../usr/lib/linuxcnc/modules/demux.so.debug -/usr/lib/debug/.build-id/07 40755 root:root -/usr/lib/debug/.build-id/07/6fd86c339319d3dd6f4d504ffc1b5f3f51f56b 120777 root:root ../../../linuxcnc/modules/genserkins.so -/usr/lib/debug/.build-id/07/6fd86c339319d3dd6f4d504ffc1b5f3f51f56b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genserkins.so.debug +/usr/lib/debug/.build-id/06/b1ef5aab106198137c6110398334ba1d8245b7 120777 root:root ../../../linuxcnc/modules/limit2.so +/usr/lib/debug/.build-id/06/b1ef5aab106198137c6110398334ba1d8245b7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit2.so.debug +/usr/lib/debug/.build-id/06/fd37bdaecf7f5d1270c01a02bc4efd432d1e67 120777 root:root ../../../linuxcnc/canterp.so +/usr/lib/debug/.build-id/06/fd37bdaecf7f5d1270c01a02bc4efd432d1e67.debug 120777 root:root ../../usr/lib/linuxcnc/canterp.so.debug /usr/lib/debug/.build-id/08 40755 root:root -/usr/lib/debug/.build-id/08/8dc3db1f0801ee15b9f33e38deed36cf39e6d4 120777 root:root ../../../linuxcnc/modules/carousel.so -/usr/lib/debug/.build-id/08/8dc3db1f0801ee15b9f33e38deed36cf39e6d4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/carousel.so.debug -/usr/lib/debug/.build-id/09 40755 root:root -/usr/lib/debug/.build-id/09/4bed84783af40738d9d4f17a86eef4ced80984 120777 root:root ../../../linuxcnc/modules/toggle.so -/usr/lib/debug/.build-id/09/4bed84783af40738d9d4f17a86eef4ced80984.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle.so.debug -/usr/lib/debug/.build-id/09/b34a2222f4a4e5c4c0b48b247e74bfb26f360f 120777 root:root ../../../linuxcnc/modules/hm2_test.so -/usr/lib/debug/.build-id/09/b34a2222f4a4e5c4c0b48b247e74bfb26f360f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_test.so.debug -/usr/lib/debug/.build-id/09/f69019d11715af38e6e2a45084e71c08f500be 120777 root:root ../../../linuxcnc/modules/limit_axis.so -/usr/lib/debug/.build-id/09/f69019d11715af38e6e2a45084e71c08f500be.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit_axis.so.debug +/usr/lib/debug/.build-id/08/847aa32d79c6debcce33872bd356022aee951a 120777 root:root ../../../linuxcnc/modules/hostmot2.so +/usr/lib/debug/.build-id/08/847aa32d79c6debcce33872bd356022aee951a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hostmot2.so.debug /usr/lib/debug/.build-id/0a 40755 root:root -/usr/lib/debug/.build-id/0a/74b67d4e4b0b008b07139d41f6a53c01f65703 120777 root:root ../../../linuxcnc/modules/tof.so -/usr/lib/debug/.build-id/0a/74b67d4e4b0b008b07139d41f6a53c01f65703.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tof.so.debug -/usr/lib/debug/.build-id/0b 40755 root:root -/usr/lib/debug/.build-id/0b/d3393dd2dd1f829a6eaafa1a37cac77df8c786 120777 root:root ../../../linuxcnc/modules/charge_pump.so -/usr/lib/debug/.build-id/0b/d3393dd2dd1f829a6eaafa1a37cac77df8c786.debug 120777 root:root ../../usr/lib/linuxcnc/modules/charge_pump.so.debug +/usr/lib/debug/.build-id/0a/1262a0f3a9e867ea6db4f2170d4df7ee769f34 120777 root:root ../../../linuxcnc/modules/mux16.so +/usr/lib/debug/.build-id/0a/1262a0f3a9e867ea6db4f2170d4df7ee769f34.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux16.so.debug /usr/lib/debug/.build-id/0c 40755 root:root -/usr/lib/debug/.build-id/0c/57453e89cc189be920308d3e9254d444704a03 120777 root:root ../../../linuxcnc/modules/classicladder_rt.so -/usr/lib/debug/.build-id/0c/57453e89cc189be920308d3e9254d444704a03.debug 120777 root:root ../../usr/lib/linuxcnc/modules/classicladder_rt.so.debug +/usr/lib/debug/.build-id/0c/5f43d2578414e06d106e195ad2e8ed72389e35 120777 root:root ../../../linuxcnc/modules/time.so +/usr/lib/debug/.build-id/0c/5f43d2578414e06d106e195ad2e8ed72389e35.debug 120777 root:root ../../usr/lib/linuxcnc/modules/time.so.debug +/usr/lib/debug/.build-id/0c/bf8c13903874239de673ead837abb266ada3a8 120777 root:root ../../../linuxcnc/modules/moveoff.so +/usr/lib/debug/.build-id/0c/bf8c13903874239de673ead837abb266ada3a8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/moveoff.so.debug /usr/lib/debug/.build-id/0d 40755 root:root -/usr/lib/debug/.build-id/0d/4e055f8ec09517f96d0e85fd952cdd36c73a3b 120777 root:root ../../../../bin/halcmd -/usr/lib/debug/.build-id/0d/4e055f8ec09517f96d0e85fd952cdd36c73a3b.debug 120777 root:root ../../usr/bin/halcmd.debug -/usr/lib/debug/.build-id/0d/ebc03e8d63a9da582d278b6578c0a64317f3af 120777 root:root ../../../../bin/iov2 -/usr/lib/debug/.build-id/0d/ebc03e8d63a9da582d278b6578c0a64317f3af.debug 120777 root:root ../../usr/bin/iov2.debug +/usr/lib/debug/.build-id/0d/e41b547978f27ecd96b6c65ea7be35f84d3d8d 120777 root:root ../../../linuxcnc/modules/mux_generic.so +/usr/lib/debug/.build-id/0d/e41b547978f27ecd96b6c65ea7be35f84d3d8d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux_generic.so.debug /usr/lib/debug/.build-id/0f 40755 root:root -/usr/lib/debug/.build-id/0f/85e871883fb9a2be223394c9d88d2520e814cc 120777 root:root ../../../linuxcnc/modules/gantry.so -/usr/lib/debug/.build-id/0f/85e871883fb9a2be223394c9d88d2520e814cc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gantry.so.debug -/usr/lib/debug/.build-id/0f/fbe0f3adb3fe3b81dcccf74d36640b0ea70f94 120777 root:root ../../../linuxcnc/modules/moveoff.so -/usr/lib/debug/.build-id/0f/fbe0f3adb3fe3b81dcccf74d36640b0ea70f94.debug 120777 root:root ../../usr/lib/linuxcnc/modules/moveoff.so.debug -/usr/lib/debug/.build-id/11 40755 root:root -/usr/lib/debug/.build-id/11/95f6b504c41e6b4233843a1b6a557595479c0f 120777 root:root ../../../linuxcnc/modules/conv_s32_float.so -/usr/lib/debug/.build-id/11/95f6b504c41e6b4233843a1b6a557595479c0f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_float.so.debug -/usr/lib/debug/.build-id/12 40755 root:root -/usr/lib/debug/.build-id/12/5f0b65fb7adaeefc2ed66eeb554f3a7083b7f0 120777 root:root ../../../../bin/halmeter -/usr/lib/debug/.build-id/12/5f0b65fb7adaeefc2ed66eeb554f3a7083b7f0.debug 120777 root:root ../../usr/bin/halmeter.debug +/usr/lib/debug/.build-id/0f/9eb5dd7a356f72e7e9664751c73313d2666e52 120777 root:root ../../../linuxcnc/modules/sim_spindle.so +/usr/lib/debug/.build-id/0f/9eb5dd7a356f72e7e9664751c73313d2666e52.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_spindle.so.debug +/usr/lib/debug/.build-id/10 40755 root:root +/usr/lib/debug/.build-id/10/198c7081821c546d7a217a1aca9222a1e98c0b 120777 root:root ../../../linuxcnc/modules/lut5.so +/usr/lib/debug/.build-id/10/198c7081821c546d7a217a1aca9222a1e98c0b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lut5.so.debug +/usr/lib/debug/.build-id/13 40755 root:root +/usr/lib/debug/.build-id/13/835ed1c9115ee4027bb31677f44fad0959d8db 120777 root:root ../../../linuxcnc/modules/conv_s32_float.so +/usr/lib/debug/.build-id/13/835ed1c9115ee4027bb31677f44fad0959d8db.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_float.so.debug +/usr/lib/debug/.build-id/14 40755 root:root +/usr/lib/debug/.build-id/14/b3300516834077e4b4b9adc5ab813d25c70d6a 120777 root:root ../../../../bin/vfs11_vfd +/usr/lib/debug/.build-id/14/b3300516834077e4b4b9adc5ab813d25c70d6a.debug 120777 root:root ../../usr/bin/vfs11_vfd.debug /usr/lib/debug/.build-id/15 40755 root:root -/usr/lib/debug/.build-id/15/12e9ed45ddfbea3a96943ab39653348f3a8ad4 120777 root:root ../../../linuxcnc/modules/corexy_by_hal.so -/usr/lib/debug/.build-id/15/12e9ed45ddfbea3a96943ab39653348f3a8ad4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/corexy_by_hal.so.debug -/usr/lib/debug/.build-id/15/790a19b897465d946e5b36634930c17e6fa70a 120777 root:root ../../../../bin/svd-ps_vfd -/usr/lib/debug/.build-id/15/790a19b897465d946e5b36634930c17e6fa70a.debug 120777 root:root ../../usr/bin/svd-ps_vfd.debug +/usr/lib/debug/.build-id/15/1f7d767654200a2e8f645e6b27fba0ee4e550e 120777 root:root ../../../linuxcnc/modules/differential.so +/usr/lib/debug/.build-id/15/1f7d767654200a2e8f645e6b27fba0ee4e550e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/differential.so.debug +/usr/lib/debug/.build-id/15/e30a76759a302ff67659139b518d806274be85 120777 root:root ../../../linuxcnc/modules/oneshot.so +/usr/lib/debug/.build-id/15/e30a76759a302ff67659139b518d806274be85.debug 120777 root:root ../../usr/lib/linuxcnc/modules/oneshot.so.debug /usr/lib/debug/.build-id/16 40755 root:root -/usr/lib/debug/.build-id/16/5c16553869780b2bad51cdf5698c00ddbdcc5c 120777 root:root ../../../python3/site-packages/gcode.so -/usr/lib/debug/.build-id/16/5c16553869780b2bad51cdf5698c00ddbdcc5c.debug 120777 root:root ../../usr/lib/python3/site-packages/gcode.so.debug +/usr/lib/debug/.build-id/16/ef9d40157aee720766e86ff56c7364845adcb0 120777 root:root ../../../linuxcnc/modules/genserkins.so +/usr/lib/debug/.build-id/16/ef9d40157aee720766e86ff56c7364845adcb0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genserkins.so.debug /usr/lib/debug/.build-id/17 40755 root:root -/usr/lib/debug/.build-id/17/eca031e71314a08f2a7402a337788e382071b0 120777 root:root ../../../linuxcnc/modules/sim_home_switch.so -/usr/lib/debug/.build-id/17/eca031e71314a08f2a7402a337788e382071b0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_home_switch.so.debug +/usr/lib/debug/.build-id/17/224394a5a1d9d26e57217577d78c6be68febc2 120777 root:root ../../../linuxcnc/modules/boss_plc.so +/usr/lib/debug/.build-id/17/224394a5a1d9d26e57217577d78c6be68febc2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/boss_plc.so.debug +/usr/lib/debug/.build-id/18 40755 root:root +/usr/lib/debug/.build-id/18/4e7359290d76e7d8e34d0c5ad218b76c0c3445 120777 root:root ../../../../bin/motion-logger +/usr/lib/debug/.build-id/18/4e7359290d76e7d8e34d0c5ad218b76c0c3445.debug 120777 root:root ../../usr/bin/motion-logger.debug +/usr/lib/debug/.build-id/18/6710573ddb0cc82e3d1f2d39c2eef600c43584 120777 root:root ../../../../bin/halrmt +/usr/lib/debug/.build-id/18/6710573ddb0cc82e3d1f2d39c2eef600c43584.debug 120777 root:root ../../usr/bin/halrmt.debug /usr/lib/debug/.build-id/19 40755 root:root -/usr/lib/debug/.build-id/19/1363eba1213db464fe0b9e3be95699b7172727 120777 root:root ../../../linuxcnc/modules/deadzone.so -/usr/lib/debug/.build-id/19/1363eba1213db464fe0b9e3be95699b7172727.debug 120777 root:root ../../usr/lib/linuxcnc/modules/deadzone.so.debug -/usr/lib/debug/.build-id/19/6ed04918d5ea8b2c37588cb5e02a713175ad3c 120777 root:root ../../../linuxcnc/modules/conv_s32_u32.so -/usr/lib/debug/.build-id/19/6ed04918d5ea8b2c37588cb5e02a713175ad3c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_u32.so.debug -/usr/lib/debug/.build-id/1a 40755 root:root -/usr/lib/debug/.build-id/1a/785a31b9b8a04549d91ad778161c628b201437 120777 root:root ../../../../bin/classicladder -/usr/lib/debug/.build-id/1a/785a31b9b8a04549d91ad778161c628b201437.debug 120777 root:root ../../usr/bin/classicladder.debug -/usr/lib/debug/.build-id/1a/cf5141aee5832c398ca5626ad461b598056ebc 120777 root:root ../../../linuxcnc/modules/ton.so -/usr/lib/debug/.build-id/1a/cf5141aee5832c398ca5626ad461b598056ebc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ton.so.debug +/usr/lib/debug/.build-id/19/900dcc9bba4c23b8ed41b7790495870858daae 120777 root:root ../../../linuxcnc/modules/clarke3.so +/usr/lib/debug/.build-id/19/900dcc9bba4c23b8ed41b7790495870858daae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke3.so.debug +/usr/lib/debug/.build-id/1b 40755 root:root +/usr/lib/debug/.build-id/1b/3c6d234f1d359e2a58845cabea491d2e594a0d 120777 root:root ../../../linuxcnc/modules/joyhandle.so +/usr/lib/debug/.build-id/1b/3c6d234f1d359e2a58845cabea491d2e594a0d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/joyhandle.so.debug /usr/lib/debug/.build-id/1c 40755 root:root -/usr/lib/debug/.build-id/1c/3464b71c26d782116d8ee5cfd78415ba973035 120777 root:root ../../../linuxcnc/modules/multiclick.so -/usr/lib/debug/.build-id/1c/3464b71c26d782116d8ee5cfd78415ba973035.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiclick.so.debug -/usr/lib/debug/.build-id/20 40755 root:root -/usr/lib/debug/.build-id/20/b90d5e7cbd00df28cf17c50efe6eb1ba4a6d62 120777 root:root ../../../../bin/rs274 -/usr/lib/debug/.build-id/20/b90d5e7cbd00df28cf17c50efe6eb1ba4a6d62.debug 120777 root:root ../../usr/bin/rs274.debug +/usr/lib/debug/.build-id/1c/0d40a409c0f4451d2d80b382f9aef2a0c73599 120777 root:root ../../../../bin/thermistor +/usr/lib/debug/.build-id/1c/0d40a409c0f4451d2d80b382f9aef2a0c73599.debug 120777 root:root ../../usr/bin/thermistor.debug +/usr/lib/debug/.build-id/1c/2006877136bf02d584c9b7c17e50c8b3415a34 120777 root:root ../../../linuxcnc/modules/wcomp.so +/usr/lib/debug/.build-id/1c/2006877136bf02d584c9b7c17e50c8b3415a34.debug 120777 root:root ../../usr/lib/linuxcnc/modules/wcomp.so.debug +/usr/lib/debug/.build-id/21 40755 root:root +/usr/lib/debug/.build-id/21/1d4332fe0099be913d6f6ff44e1ef3dab10c43 120777 root:root ../../../linuxcnc/modules/knob2float.so +/usr/lib/debug/.build-id/21/1d4332fe0099be913d6f6ff44e1ef3dab10c43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/knob2float.so.debug +/usr/lib/debug/.build-id/21/5d4750442282f6e398264bbaa63be5e598ff7c 120777 root:root ../../../linuxcnc/modules/orient.so +/usr/lib/debug/.build-id/21/5d4750442282f6e398264bbaa63be5e598ff7c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/orient.so.debug /usr/lib/debug/.build-id/22 40755 root:root -/usr/lib/debug/.build-id/22/fb31b4685574f72285ca4f9d903dbe0582dd8d 120777 root:root ../../../../bin/pi500_vfd -/usr/lib/debug/.build-id/22/fb31b4685574f72285ca4f9d903dbe0582dd8d.debug 120777 root:root ../../usr/bin/pi500_vfd.debug +/usr/lib/debug/.build-id/22/9f93de3eaf78d98a3b28b150a6d1b800b2b01d 120777 root:root ../../../linuxcnc/modules/sum2.so +/usr/lib/debug/.build-id/22/9f93de3eaf78d98a3b28b150a6d1b800b2b01d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sum2.so.debug +/usr/lib/debug/.build-id/23 40755 root:root +/usr/lib/debug/.build-id/23/d3b169406d56292b431f709c9ab0dc6ed57c40 120777 root:root ../../../../bin/iov2 +/usr/lib/debug/.build-id/23/d3b169406d56292b431f709c9ab0dc6ed57c40.debug 120777 root:root ../../usr/bin/iov2.debug /usr/lib/debug/.build-id/24 40755 root:root @@ -82,9 +80,5 @@ /usr/lib/debug/.build-id/24/acfb369dd516ad869671a227e906fb29362c0c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rosekins.so.debug -/usr/lib/debug/.build-id/25 40755 root:root -/usr/lib/debug/.build-id/25/18a4a8c035f946e29ceca9ed7d51b758083fe6 120777 root:root ../../../../bin/rtapi_app -/usr/lib/debug/.build-id/25/18a4a8c035f946e29ceca9ed7d51b758083fe6.debug 120777 root:root ../../usr/bin/rtapi_app.debug -/usr/lib/debug/.build-id/25/3e1ecbbdc0b50442bda5df3ee59fe2fae038eb 120777 root:root ../../../linuxcnc/modules/siggen.so -/usr/lib/debug/.build-id/25/3e1ecbbdc0b50442bda5df3ee59fe2fae038eb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/siggen.so.debug -/usr/lib/debug/.build-id/25/e376a896ac8710dd42d9b409bf988f4efe81d2 120777 root:root ../../../linuxcnc/modules/tpmod.so -/usr/lib/debug/.build-id/25/e376a896ac8710dd42d9b409bf988f4efe81d2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tpmod.so.debug +/usr/lib/debug/.build-id/26 40755 root:root +/usr/lib/debug/.build-id/26/376870e964c2b2b5937bac64492781f5cf5104 120777 root:root ../../../linuxcnc/modules/mux2.so +/usr/lib/debug/.build-id/26/376870e964c2b2b5937bac64492781f5cf5104.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux2.so.debug /usr/lib/debug/.build-id/28 40755 root:root @@ -92,61 +86,58 @@ /usr/lib/debug/.build-id/28/23123494eb9dec8f4094dda1d3277262d3362c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/homecomp.so.debug +/usr/lib/debug/.build-id/28/83f1bab48a6de62771c045720f7c682a7a2acb 120777 root:root ../../../linuxcnc/modules/hm2_test.so +/usr/lib/debug/.build-id/28/83f1bab48a6de62771c045720f7c682a7a2acb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_test.so.debug +/usr/lib/debug/.build-id/28/8abc8b74ed1248820632204eaecb4464dad067 120777 root:root ../../../linuxcnc/modules/bin2gray.so +/usr/lib/debug/.build-id/28/8abc8b74ed1248820632204eaecb4464dad067.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bin2gray.so.debug +/usr/lib/debug/.build-id/28/bb101859ec335beb6c491f5ccdc432d5845c59 120777 root:root ../../../linuxcnc/modules/hm2_spi.so +/usr/lib/debug/.build-id/28/bb101859ec335beb6c491f5ccdc432d5845c59.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_spi.so.debug +/usr/lib/debug/.build-id/29 40755 root:root +/usr/lib/debug/.build-id/29/3b7d890b33e83b7a455f16704b9533426c5cf8 120777 root:root ../../../../bin/mb2hal +/usr/lib/debug/.build-id/29/3b7d890b33e83b7a455f16704b9533426c5cf8.debug 120777 root:root ../../usr/bin/mb2hal.debug /usr/lib/debug/.build-id/2b 40755 root:root -/usr/lib/debug/.build-id/2b/4d60371877b4c3e8c098344680dfca0a1ef637 120777 root:root ../../../linuxcnc/modules/mux2.so -/usr/lib/debug/.build-id/2b/4d60371877b4c3e8c098344680dfca0a1ef637.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux2.so.debug -/usr/lib/debug/.build-id/2f 40755 root:root -/usr/lib/debug/.build-id/2f/a3af6bede1acba898d27935986ea2671f7f29c 120777 root:root ../../../linuxcnc/modules/abs_s32.so -/usr/lib/debug/.build-id/2f/a3af6bede1acba898d27935986ea2671f7f29c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs_s32.so.debug -/usr/lib/debug/.build-id/30 40755 root:root -/usr/lib/debug/.build-id/30/32c3d677855f39cc94ca0357ac25ac80aec8b7 120777 root:root ../../../linuxcnc/modules/differential.so -/usr/lib/debug/.build-id/30/32c3d677855f39cc94ca0357ac25ac80aec8b7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/differential.so.debug -/usr/lib/debug/.build-id/32 40755 root:root -/usr/lib/debug/.build-id/32/c0090e35fce8850de3c314464d60dac02a86ef 120777 root:root ../../../python3/site-packages/_hal.so -/usr/lib/debug/.build-id/32/c0090e35fce8850de3c314464d60dac02a86ef.debug 120777 root:root ../../usr/lib/python3/site-packages/_hal.so.debug +/usr/lib/debug/.build-id/2b/f5ff0af872b89ca6b50da3f4743df255b67243 120777 root:root ../../../linuxcnc/modules/enum.so +/usr/lib/debug/.build-id/2b/f5ff0af872b89ca6b50da3f4743df255b67243.debug 120777 root:root ../../usr/lib/linuxcnc/modules/enum.so.debug +/usr/lib/debug/.build-id/31 40755 root:root +/usr/lib/debug/.build-id/31/df1814857bb4022bf2dfbb6f11b6c48b137a2f 120777 root:root ../../../linuxcnc/modules/hm2_7i90.so +/usr/lib/debug/.build-id/31/df1814857bb4022bf2dfbb6f11b6c48b137a2f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i90.so.debug /usr/lib/debug/.build-id/33 40755 root:root -/usr/lib/debug/.build-id/33/5e86810310f149ef54ce33b58a723e4f7cfda1 120777 root:root ../../../linuxcnc/modules/spindle.so -/usr/lib/debug/.build-id/33/5e86810310f149ef54ce33b58a723e4f7cfda1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle.so.debug -/usr/lib/debug/.build-id/33/8e336a9baf4e3a5ce522a95cdc12ad56c6783d 120777 root:root ../../../linuxcnc/modules/timedelay.so -/usr/lib/debug/.build-id/33/8e336a9baf4e3a5ce522a95cdc12ad56c6783d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelay.so.debug -/usr/lib/debug/.build-id/33/92b52984c5fa955ca6a864aed9660d582a8a8d 120777 root:root ../../../linuxcnc/modules/sim_axis_hardware.so -/usr/lib/debug/.build-id/33/92b52984c5fa955ca6a864aed9660d582a8a8d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_axis_hardware.so.debug -/usr/lib/debug/.build-id/36 40755 root:root -/usr/lib/debug/.build-id/36/b41b779d410be605d3cd9a15ca6d9e88a4ad28 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so -/usr/lib/debug/.build-id/36/b41b779d410be605d3cd9a15ca6d9e88a4ad28.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug +/usr/lib/debug/.build-id/33/04de053575e9dbe3bf9cccc8e9e3eeead8ffaf 120777 root:root ../../../linuxcnc/modules/hal_parport.so +/usr/lib/debug/.build-id/33/04de053575e9dbe3bf9cccc8e9e3eeead8ffaf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_parport.so.debug +/usr/lib/debug/.build-id/33/89cb66ff161d33db3da55999838d44067d3cb2 120777 root:root ../../../linuxcnc/modules/invert.so +/usr/lib/debug/.build-id/33/89cb66ff161d33db3da55999838d44067d3cb2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/invert.so.debug +/usr/lib/debug/.build-id/34 40755 root:root +/usr/lib/debug/.build-id/34/22a51d5fed56ede7d738de1cd7a0204fd80ca0 120777 root:root ../../../linuxcnc/modules/axistest.so +/usr/lib/debug/.build-id/34/22a51d5fed56ede7d738de1cd7a0204fd80ca0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/axistest.so.debug +/usr/lib/debug/.build-id/34/6f8cb031e6ba07778290344010aea1e903db6e 120777 root:root ../../../linuxcnc/modules/encoder_ratio.so +/usr/lib/debug/.build-id/34/6f8cb031e6ba07778290344010aea1e903db6e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder_ratio.so.debug /usr/lib/debug/.build-id/37 40755 root:root -/usr/lib/debug/.build-id/37/b0358f11f7ad4213944d9f6c897ebf37ca1b2c 120777 root:root ../../../linuxcnc/modules/bldc.so -/usr/lib/debug/.build-id/37/b0358f11f7ad4213944d9f6c897ebf37ca1b2c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bldc.so.debug +/usr/lib/debug/.build-id/37/c693dc55008a2daa46446c1b34192b7579cedb 120777 root:root ../../../../bin/pi500_vfd +/usr/lib/debug/.build-id/37/c693dc55008a2daa46446c1b34192b7579cedb.debug 120777 root:root ../../usr/bin/pi500_vfd.debug /usr/lib/debug/.build-id/38 40755 root:root -/usr/lib/debug/.build-id/38/b9941a3b7f020a102a60a6cce05b1dafbae40e 120777 root:root ../../../linuxcnc/modules/pentakins.so -/usr/lib/debug/.build-id/38/b9941a3b7f020a102a60a6cce05b1dafbae40e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pentakins.so.debug -/usr/lib/debug/.build-id/39 40755 root:root -/usr/lib/debug/.build-id/39/6b0d7c2309ef8020c0965979f9178d86474935 120777 root:root ../../../linuxcnc/modules/mult2.so -/usr/lib/debug/.build-id/39/6b0d7c2309ef8020c0965979f9178d86474935.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mult2.so.debug -/usr/lib/debug/.build-id/3b 40755 root:root -/usr/lib/debug/.build-id/3b/34162d748f6cdebdaf6fcc7cdc8f0e387facf1 120777 root:root ../../../linuxcnc/modules/ilowpass.so -/usr/lib/debug/.build-id/3b/34162d748f6cdebdaf6fcc7cdc8f0e387facf1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ilowpass.so.debug -/usr/lib/debug/.build-id/3b/a8697a2aeb9f9e4b8073402d384b71fa37ad43 120777 root:root ../../../linuxcnc/modules/conv_s32_bit.so -/usr/lib/debug/.build-id/3b/a8697a2aeb9f9e4b8073402d384b71fa37ad43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_bit.so.debug -/usr/lib/debug/.build-id/3c 40755 root:root -/usr/lib/debug/.build-id/3c/d71d9d7c45dc62b61a86fb89a71e3f7758431a 120777 root:root ../../../linuxcnc/modules/blend.so -/usr/lib/debug/.build-id/3c/d71d9d7c45dc62b61a86fb89a71e3f7758431a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/blend.so.debug +/usr/lib/debug/.build-id/38/075e7078dcd854f28adaab5215f8330d9bb1d3 120777 root:root ../../../linuxcnc/modules/scale.so +/usr/lib/debug/.build-id/38/075e7078dcd854f28adaab5215f8330d9bb1d3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scale.so.debug /usr/lib/debug/.build-id/3d 40755 root:root -/usr/lib/debug/.build-id/3d/418dccf088400fd97a118ecd5b20e447dd71f1 120777 root:root ../../../linuxcnc/modules/simple_tp.so -/usr/lib/debug/.build-id/3d/418dccf088400fd97a118ecd5b20e447dd71f1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/simple_tp.so.debug +/usr/lib/debug/.build-id/3d/f81c3b9924587cd2ffb67966ec09bc93e58f4e 120777 root:root ../../../linuxcnc/modules/pentakins.so +/usr/lib/debug/.build-id/3d/f81c3b9924587cd2ffb67966ec09bc93e58f4e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pentakins.so.debug /usr/lib/debug/.build-id/3e 40755 root:root -/usr/lib/debug/.build-id/3e/eb3e3cd1644a5461313a8311ee997df5b01370 120777 root:root ../../../linuxcnc/modules/scarakins.so -/usr/lib/debug/.build-id/3e/eb3e3cd1644a5461313a8311ee997df5b01370.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scarakins.so.debug -/usr/lib/debug/.build-id/3f 40755 root:root -/usr/lib/debug/.build-id/3f/cb07653439084b8850b4e2dd72dd0f3776d2c8 120777 root:root ../../../linuxcnc/modules/scope_rt.so -/usr/lib/debug/.build-id/3f/cb07653439084b8850b4e2dd72dd0f3776d2c8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scope_rt.so.debug +/usr/lib/debug/.build-id/3e/ad7ee5d9090379e6755fa9725c2557e2eaf7e2 120777 root:root ../../../linuxcnc/modules/corexy_by_hal.so +/usr/lib/debug/.build-id/3e/ad7ee5d9090379e6755fa9725c2557e2eaf7e2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/corexy_by_hal.so.debug /usr/lib/debug/.build-id/40 40755 root:root -/usr/lib/debug/.build-id/40/1aec2ff56f73b05125fd4fc64a75b7c26b9033 120777 root:root ../../../linuxcnc/modules/rotarydeltakins.so -/usr/lib/debug/.build-id/40/1aec2ff56f73b05125fd4fc64a75b7c26b9033.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotarydeltakins.so.debug +/usr/lib/debug/.build-id/40/b96e23b0235fe73f3317c91406650eacd645cc 120777 root:root ../../../linuxcnc/modules/conv_u32_s32.so +/usr/lib/debug/.build-id/40/b96e23b0235fe73f3317c91406650eacd645cc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_s32.so.debug /usr/lib/debug/.build-id/41 40755 root:root -/usr/lib/debug/.build-id/41/4b26daef31850705c3d56485b63fa9c75fd9fa 120777 root:root ../../../linuxcnc/modules/lowpass.so -/usr/lib/debug/.build-id/41/4b26daef31850705c3d56485b63fa9c75fd9fa.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lowpass.so.debug +/usr/lib/debug/.build-id/41/4256784dd96550427eb33b7f87ef40897894cc 120777 root:root ../../../linuxcnc/modules/conv_bit_s32.so +/usr/lib/debug/.build-id/41/4256784dd96550427eb33b7f87ef40897894cc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_s32.so.debug +/usr/lib/debug/.build-id/41/adb4fe26f4ad3987ff11283e5ca2c66aaf2065 120777 root:root ../../../linuxcnc/modules/mesa_7i65.so +/usr/lib/debug/.build-id/41/adb4fe26f4ad3987ff11283e5ca2c66aaf2065.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_7i65.so.debug /usr/lib/debug/.build-id/43 40755 root:root -/usr/lib/debug/.build-id/43/01312146cce2dc9d8d3973f35e2b78c9f57683 120777 root:root ../../../linuxcnc/modules/mux8.so -/usr/lib/debug/.build-id/43/01312146cce2dc9d8d3973f35e2b78c9f57683.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux8.so.debug -/usr/lib/debug/.build-id/43/b07f0ae2d3d6f0ca9fbd68ba3e205b269138c0 120777 root:root ../../../linuxcnc/modules/limit1.so -/usr/lib/debug/.build-id/43/b07f0ae2d3d6f0ca9fbd68ba3e205b269138c0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit1.so.debug +/usr/lib/debug/.build-id/43/746cdbd7ff72ab998d749193b7e38a24bf8e31 120777 root:root ../../../linuxcnc/modules/gray2bin.so +/usr/lib/debug/.build-id/43/746cdbd7ff72ab998d749193b7e38a24bf8e31.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gray2bin.so.debug +/usr/lib/debug/.build-id/43/884512fab9fec12a53de6caaf2fdfc95c107d0 120777 root:root ../../../../bin/rtapi_app +/usr/lib/debug/.build-id/43/884512fab9fec12a53de6caaf2fdfc95c107d0.debug 120777 root:root ../../usr/bin/rtapi_app.debug +/usr/lib/debug/.build-id/45 40755 root:root +/usr/lib/debug/.build-id/45/430668f444d0a73feb21be406bde949b038ae3 120777 root:root ../../../linuxcnc/modules/deadzone.so +/usr/lib/debug/.build-id/45/430668f444d0a73feb21be406bde949b038ae3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/deadzone.so.debug +/usr/lib/debug/.build-id/46 40755 root:root +/usr/lib/debug/.build-id/46/8aab21462ad16aaf2272e2e8ea3781f1baf4fd 120777 root:root ../../../linuxcnc/modules/match8.so +/usr/lib/debug/.build-id/46/8aab21462ad16aaf2272e2e8ea3781f1baf4fd.debug 120777 root:root ../../usr/lib/linuxcnc/modules/match8.so.debug /usr/lib/debug/.build-id/48 40755 root:root @@ -154,67 +145,53 @@ /usr/lib/debug/.build-id/48/ef0d6db7725249a8eb1a55b99289218cd0856f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/homemod.so.debug -/usr/lib/debug/.build-id/49 40755 root:root -/usr/lib/debug/.build-id/49/48e439b39624e15a273dedb99e440418e870ca 120777 root:root ../../../../bin/panelui -/usr/lib/debug/.build-id/49/48e439b39624e15a273dedb99e440418e870ca.debug 120777 root:root ../../usr/bin/panelui.debug -/usr/lib/debug/.build-id/49/725f85eebc2a4f0f36af3d947298a890ab8186 120777 root:root ../../../linuxcnc/modules/pumakins.so -/usr/lib/debug/.build-id/49/725f85eebc2a4f0f36af3d947298a890ab8186.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pumakins.so.debug -/usr/lib/debug/.build-id/49/8fa39da22f88b8ad603ebe55979078c09bff94 120777 root:root ../../../linuxcnc/modules/conv_float_s32.so -/usr/lib/debug/.build-id/49/8fa39da22f88b8ad603ebe55979078c09bff94.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_s32.so.debug -/usr/lib/debug/.build-id/49/dba11809658d3a49b121f2bbeb7368e8e1c20d 120777 root:root ../../../linuxcnc/modules/not.so -/usr/lib/debug/.build-id/49/dba11809658d3a49b121f2bbeb7368e8e1c20d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/not.so.debug -/usr/lib/debug/.build-id/4b 40755 root:root -/usr/lib/debug/.build-id/4b/127b47baf6c40009cb20c70a0c8102c54bcd4e 120777 root:root ../../../../bin/vfdb_vfd -/usr/lib/debug/.build-id/4b/127b47baf6c40009cb20c70a0c8102c54bcd4e.debug 120777 root:root ../../usr/bin/vfdb_vfd.debug +/usr/lib/debug/.build-id/4a 40755 root:root +/usr/lib/debug/.build-id/4a/28a346e64ffb8c27de2443fc80971f0464995c 120777 root:root ../../../linuxcnc/modules/limit3.so +/usr/lib/debug/.build-id/4a/28a346e64ffb8c27de2443fc80971f0464995c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit3.so.debug /usr/lib/debug/.build-id/4c 40755 root:root -/usr/lib/debug/.build-id/4c/18ee8556f342e70cf8ca8cabdb36e1378c25e1 120777 root:root ../../../linuxcnc/modules/debounce.so -/usr/lib/debug/.build-id/4c/18ee8556f342e70cf8ca8cabdb36e1378c25e1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/debounce.so.debug +/usr/lib/debug/.build-id/4c/49fc1dcb01215adb77dacd14a0eaf5ddbe69a1 120777 root:root ../../../linuxcnc/modules/edge.so +/usr/lib/debug/.build-id/4c/49fc1dcb01215adb77dacd14a0eaf5ddbe69a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/edge.so.debug +/usr/lib/debug/.build-id/4c/71f98922f6075404d561fd5998d9c5d3ab6fb4 120777 root:root ../../../../bin/classicladder +/usr/lib/debug/.build-id/4c/71f98922f6075404d561fd5998d9c5d3ab6fb4.debug 120777 root:root ../../usr/bin/classicladder.debug +/usr/lib/debug/.build-id/4c/ecd5e7871632f1de384668b4b8f8ab1736d60a 120777 root:root ../../../linuxcnc/modules/hal_pi_gpio.so +/usr/lib/debug/.build-id/4c/ecd5e7871632f1de384668b4b8f8ab1736d60a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_pi_gpio.so.debug +/usr/lib/debug/.build-id/4d 40755 root:root +/usr/lib/debug/.build-id/4d/2a272c1752b004801ee9a46e804ddaf1de3559 120777 root:root ../../../linuxcnc/modules/tristate_bit.so +/usr/lib/debug/.build-id/4d/2a272c1752b004801ee9a46e804ddaf1de3559.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_bit.so.debug /usr/lib/debug/.build-id/4e 40755 root:root -/usr/lib/debug/.build-id/4e/ae15b93fd22d4cd5425d9a1b9b1191b75e6d43 120777 root:root ../../../linuxcnc/modules/gearchange.so -/usr/lib/debug/.build-id/4e/ae15b93fd22d4cd5425d9a1b9b1191b75e6d43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gearchange.so.debug -/usr/lib/debug/.build-id/4f 40755 root:root -/usr/lib/debug/.build-id/4f/a9e44774bba5fff857afa538e1e269f8114795 120777 root:root ../../../../bin/motion-logger -/usr/lib/debug/.build-id/4f/a9e44774bba5fff857afa538e1e269f8114795.debug 120777 root:root ../../usr/bin/motion-logger.debug +/usr/lib/debug/.build-id/4e/4a7439bba6f86daf54402bace96903a6da6a40 120777 root:root ../../../../bin/wj200_vfd +/usr/lib/debug/.build-id/4e/4a7439bba6f86daf54402bace96903a6da6a40.debug 120777 root:root ../../usr/bin/wj200_vfd.debug +/usr/lib/debug/.build-id/50 40755 root:root +/usr/lib/debug/.build-id/50/0c0093b29acc8bbb8cd4eb5cc64b6203e3a6ae 120777 root:root ../../../linuxcnc/modules/mux4.so +/usr/lib/debug/.build-id/50/0c0093b29acc8bbb8cd4eb5cc64b6203e3a6ae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux4.so.debug +/usr/lib/debug/.build-id/50/689d85ba21f523d3d6a12380410fc0f7524ddf 120777 root:root ../../../linuxcnc/modules/max31855.so +/usr/lib/debug/.build-id/50/689d85ba21f523d3d6a12380410fc0f7524ddf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/max31855.so.debug +/usr/lib/debug/.build-id/50/7226cab6c979f4fb27eefc358ee3144046711d 120777 root:root ../../../linuxcnc/modules/xor2.so +/usr/lib/debug/.build-id/50/7226cab6c979f4fb27eefc358ee3144046711d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xor2.so.debug /usr/lib/debug/.build-id/51 40755 root:root -/usr/lib/debug/.build-id/51/722b4461a7959b4e1b379fd81d3b6f21280b6e 120777 root:root ../../../linuxcnc/modules/knob2float.so -/usr/lib/debug/.build-id/51/722b4461a7959b4e1b379fd81d3b6f21280b6e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/knob2float.so.debug -/usr/lib/debug/.build-id/51/a28ac9756f1cc782fe91be65ccfbbb7c8e7cb1 120777 root:root ../../../linuxcnc/modules/encoder_ratio.so -/usr/lib/debug/.build-id/51/a28ac9756f1cc782fe91be65ccfbbb7c8e7cb1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder_ratio.so.debug +/usr/lib/debug/.build-id/51/1bc0e0c570ef5d4d1836e09ac88640d70bec5c 120777 root:root ../../../../bin/halcmd +/usr/lib/debug/.build-id/51/1bc0e0c570ef5d4d1836e09ac88640d70bec5c.debug 120777 root:root ../../usr/bin/halcmd.debug +/usr/lib/debug/.build-id/51/ede65314dd697d5f7572a8d1d7aca956f3d99f 120777 root:root ../../../linuxcnc/modules/gantry.so +/usr/lib/debug/.build-id/51/ede65314dd697d5f7572a8d1d7aca956f3d99f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gantry.so.debug /usr/lib/debug/.build-id/52 40755 root:root -/usr/lib/debug/.build-id/52/12459547175c56b72fcf7c608e57ef375d27fc 120777 root:root ../../../linuxcnc/modules/match8.so -/usr/lib/debug/.build-id/52/12459547175c56b72fcf7c608e57ef375d27fc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/match8.so.debug -/usr/lib/debug/.build-id/52/9e499b1267d6862328e89f901c7f20dfdb2d9c 120777 root:root ../../../linuxcnc/modules/supply.so -/usr/lib/debug/.build-id/52/9e499b1267d6862328e89f901c7f20dfdb2d9c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/supply.so.debug -/usr/lib/debug/.build-id/53 40755 root:root -/usr/lib/debug/.build-id/53/07478d601e336af49036c2953078af137adb08 120777 root:root ../../../linuxcnc/modules/select8.so -/usr/lib/debug/.build-id/53/07478d601e336af49036c2953078af137adb08.debug 120777 root:root ../../usr/lib/linuxcnc/modules/select8.so.debug +/usr/lib/debug/.build-id/52/e38947e32dbf6dbf29668b8d0b7ab419a6e28b 120777 root:root ../../../linuxcnc/modules/xyzbc-trt-kins.so +/usr/lib/debug/.build-id/52/e38947e32dbf6dbf29668b8d0b7ab419a6e28b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzbc-trt-kins.so.debug +/usr/lib/debug/.build-id/54 40755 root:root +/usr/lib/debug/.build-id/54/77dc2dbbd3ccbf9cd81db3e56d7eeceddddd37 120777 root:root ../../../linuxcnc/modules/limit1.so +/usr/lib/debug/.build-id/54/77dc2dbbd3ccbf9cd81db3e56d7eeceddddd37.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit1.so.debug /usr/lib/debug/.build-id/55 40755 root:root -/usr/lib/debug/.build-id/55/c87d366c63ff57519fe79bdec12dfac49adfa6 120777 root:root ../../../../bin/tool_mmap_read -/usr/lib/debug/.build-id/55/c87d366c63ff57519fe79bdec12dfac49adfa6.debug 120777 root:root ../../usr/bin/tool_mmap_read.debug +/usr/lib/debug/.build-id/55/8bd4f903a0538a2ef2b87ebf7c59188ad7986d 120777 root:root ../../../../bin/gs2_vfd +/usr/lib/debug/.build-id/55/8bd4f903a0538a2ef2b87ebf7c59188ad7986d.debug 120777 root:root ../../usr/bin/gs2_vfd.debug +/usr/lib/debug/.build-id/56 40755 root:root +/usr/lib/debug/.build-id/56/99f2e2831fe6f069911258678f357b17d1cd24 120777 root:root ../../../../bin/linuxcncsvr +/usr/lib/debug/.build-id/56/99f2e2831fe6f069911258678f357b17d1cd24.debug 120777 root:root ../../usr/bin/linuxcncsvr.debug /usr/lib/debug/.build-id/57 40755 root:root -/usr/lib/debug/.build-id/57/639edf459b0ea77bc2789adbe04897f88c3f2d 120777 root:root ../../../linuxcnc/modules/near.so -/usr/lib/debug/.build-id/57/639edf459b0ea77bc2789adbe04897f88c3f2d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/near.so.debug -/usr/lib/debug/.build-id/59 40755 root:root -/usr/lib/debug/.build-id/59/382d94b5ca380f6c71bb2de357eb313101e3a3 120777 root:root ../../../linuxcnc/modules/hal_parport.so -/usr/lib/debug/.build-id/59/382d94b5ca380f6c71bb2de357eb313101e3a3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_parport.so.debug -/usr/lib/debug/.build-id/59/3bfe9b28dcb81c7399bb09204adaf6479de035 120777 root:root ../../../../bin/xhc-whb04b-6 -/usr/lib/debug/.build-id/59/3bfe9b28dcb81c7399bb09204adaf6479de035.debug 120777 root:root ../../usr/bin/xhc-whb04b-6.debug -/usr/lib/debug/.build-id/59/956011cfb6c7756647e401a4ca3abe56641d55 120777 root:root ../../../linuxcnc/modules/clarke2.so -/usr/lib/debug/.build-id/59/956011cfb6c7756647e401a4ca3abe56641d55.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke2.so.debug -/usr/lib/debug/.build-id/59/f9476243c2e5cef3cb09f3276f220bdf631e64 120777 root:root ../../../linuxcnc/modules/and2.so -/usr/lib/debug/.build-id/59/f9476243c2e5cef3cb09f3276f220bdf631e64.debug 120777 root:root ../../usr/lib/linuxcnc/modules/and2.so.debug +/usr/lib/debug/.build-id/57/ad5cdbc09fa04913d21ff40dfcfee34ae3f9f4 120777 root:root ../../../linuxcnc/modules/comp.so +/usr/lib/debug/.build-id/57/ad5cdbc09fa04913d21ff40dfcfee34ae3f9f4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/comp.so.debug /usr/lib/debug/.build-id/5b 40755 root:root -/usr/lib/debug/.build-id/5b/bf44ff3a039fa48b141d7031959f1260cc1693 120777 root:root ../../../linuxcnc/modules/threadtest.so -/usr/lib/debug/.build-id/5b/bf44ff3a039fa48b141d7031959f1260cc1693.debug 120777 root:root ../../usr/lib/linuxcnc/modules/threadtest.so.debug -/usr/lib/debug/.build-id/5b/e843efd8f9ca4ccc6187d45472227f5eea751f 120777 root:root ../../../linuxcnc/modules/constant.so -/usr/lib/debug/.build-id/5b/e843efd8f9ca4ccc6187d45472227f5eea751f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/constant.so.debug -/usr/lib/debug/.build-id/5c 40755 root:root -/usr/lib/debug/.build-id/5c/5ba5d70627b33523ac9c0cd304d466999a9400 120777 root:root ../../../linuxcnc/modules/conv_float_u32.so -/usr/lib/debug/.build-id/5c/5ba5d70627b33523ac9c0cd304d466999a9400.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_u32.so.debug +/usr/lib/debug/.build-id/5b/06eb0afb32cbccef8d1e1a536e3088b13912a3 120777 root:root ../../../linuxcnc/modules/ohmic.so +/usr/lib/debug/.build-id/5b/06eb0afb32cbccef8d1e1a536e3088b13912a3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ohmic.so.debug +/usr/lib/debug/.build-id/5b/98241933eff96a8bd066e0ff0d56a2a5132dda 120777 root:root ../../../linuxcnc/modules/integ.so +/usr/lib/debug/.build-id/5b/98241933eff96a8bd066e0ff0d56a2a5132dda.debug 120777 root:root ../../usr/lib/linuxcnc/modules/integ.so.debug /usr/lib/debug/.build-id/5d 40755 root:root -/usr/lib/debug/.build-id/5d/171b0326b19a32098a36a5b2f1dee1cefbee1e 120777 root:root ../../../linuxcnc/modules/sample_hold.so -/usr/lib/debug/.build-id/5d/171b0326b19a32098a36a5b2f1dee1cefbee1e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sample_hold.so.debug -/usr/lib/debug/.build-id/5d/8fed74318b1a07a81c0c3bfa138d322a95d115 120777 root:root ../../../linuxcnc/modules/5axiskins.so -/usr/lib/debug/.build-id/5d/8fed74318b1a07a81c0c3bfa138d322a95d115.debug 120777 root:root ../../usr/lib/linuxcnc/modules/5axiskins.so.debug -/usr/lib/debug/.build-id/5e 40755 root:root -/usr/lib/debug/.build-id/5e/60a89ea0395f4a7c94e523f0ca8033c7689269 120777 root:root ../../../linuxcnc/modules/orient.so -/usr/lib/debug/.build-id/5e/60a89ea0395f4a7c94e523f0ca8033c7689269.debug 120777 root:root ../../usr/lib/linuxcnc/modules/orient.so.debug +/usr/lib/debug/.build-id/5d/ae2f541f0d9a8a2b7970434922ccbc3e5132a1 120777 root:root ../../../linuxcnc/modules/latencybins.so +/usr/lib/debug/.build-id/5d/ae2f541f0d9a8a2b7970434922ccbc3e5132a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/latencybins.so.debug /usr/lib/debug/.build-id/5f 40755 root:root @@ -222,254 +199,247 @@ /usr/lib/debug/.build-id/5f/0fb9db44e1a735031721d8de2284e4e4f3f64d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/counter.so.debug -/usr/lib/debug/.build-id/5f/a4349a686af4110edd99f1b6d2949870c3977c 120777 root:root ../../../linuxcnc/modules/bitwise.so -/usr/lib/debug/.build-id/5f/a4349a686af4110edd99f1b6d2949870c3977c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitwise.so.debug -/usr/lib/debug/.build-id/5f/cefdebb70ac5b3bbe9d91f1908fbfd10b264c3 120777 root:root ../../../linuxcnc/modules/conv_bit_u32.so -/usr/lib/debug/.build-id/5f/cefdebb70ac5b3bbe9d91f1908fbfd10b264c3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_u32.so.debug +/usr/lib/debug/.build-id/5f/a5b6347a376efd31a0152f91949c4482d0d3d0 120777 root:root ../../../linuxcnc/modules/limit_axis.so +/usr/lib/debug/.build-id/5f/a5b6347a376efd31a0152f91949c4482d0d3d0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit_axis.so.debug +/usr/lib/debug/.build-id/5f/aa7e3c3ed980a2feb7dcab7bc8b2da08359618 120777 root:root ../../../linuxcnc/modules/sim_axis_hardware.so +/usr/lib/debug/.build-id/5f/aa7e3c3ed980a2feb7dcab7bc8b2da08359618.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_axis_hardware.so.debug +/usr/lib/debug/.build-id/60 40755 root:root +/usr/lib/debug/.build-id/60/5eda016ddc3514df17901ada6643a045ff1118 120777 root:root ../../../linuxcnc/modules/filter_kalman.so +/usr/lib/debug/.build-id/60/5eda016ddc3514df17901ada6643a045ff1118.debug 120777 root:root ../../usr/lib/linuxcnc/modules/filter_kalman.so.debug /usr/lib/debug/.build-id/61 40755 root:root -/usr/lib/debug/.build-id/61/9008fccc3ef50313442234b491275b6cd41800 120777 root:root ../../../linuxcnc/modules/plasmac.so -/usr/lib/debug/.build-id/61/9008fccc3ef50313442234b491275b6cd41800.debug 120777 root:root ../../usr/lib/linuxcnc/modules/plasmac.so.debug +/usr/lib/debug/.build-id/61/20c371b8de23c0f49bf840ca4908973d2bb90e 120777 root:root ../../../linuxcnc/modules/hm2_rpspi.so +/usr/lib/debug/.build-id/61/20c371b8de23c0f49bf840ca4908973d2bb90e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_rpspi.so.debug +/usr/lib/debug/.build-id/61/e8189ef6313d5fbd470f4549c58e05af749c84 120777 root:root ../../../linuxcnc/modules/millturn.so +/usr/lib/debug/.build-id/61/e8189ef6313d5fbd470f4549c58e05af749c84.debug 120777 root:root ../../usr/lib/linuxcnc/modules/millturn.so.debug +/usr/lib/debug/.build-id/62 40755 root:root +/usr/lib/debug/.build-id/62/9728d7e7f09cef099f9388666c06e3ac8a404a 120777 root:root ../../../linuxcnc/modules/demux.so +/usr/lib/debug/.build-id/62/9728d7e7f09cef099f9388666c06e3ac8a404a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/demux.so.debug +/usr/lib/debug/.build-id/62/af7b68c4c16c20bcc21da9f4f38a9d5862f46d 120777 root:root ../../../linuxcnc/modules/spindle_monitor.so +/usr/lib/debug/.build-id/62/af7b68c4c16c20bcc21da9f4f38a9d5862f46d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle_monitor.so.debug /usr/lib/debug/.build-id/65 40755 root:root -/usr/lib/debug/.build-id/65/bff1395e58163afa05d4a885d5b816245b77d5 120777 root:root ../../../linuxcnc/modules/wcomp.so -/usr/lib/debug/.build-id/65/bff1395e58163afa05d4a885d5b816245b77d5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/wcomp.so.debug -/usr/lib/debug/.build-id/68 40755 root:root -/usr/lib/debug/.build-id/68/5ffc0be403e8a82d3f669da9b3b6542b501556 120777 root:root ../../../linuxcnc/modules/mux4.so -/usr/lib/debug/.build-id/68/5ffc0be403e8a82d3f669da9b3b6542b501556.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux4.so.debug +/usr/lib/debug/.build-id/65/60b6086dd62a2d8ebae965b991cbec5a84cf52 120777 root:root ../../../linuxcnc/modules/serport.so +/usr/lib/debug/.build-id/65/60b6086dd62a2d8ebae965b991cbec5a84cf52.debug 120777 root:root ../../usr/lib/linuxcnc/modules/serport.so.debug /usr/lib/debug/.build-id/69 40755 root:root -/usr/lib/debug/.build-id/69/5e5575772f530d0ad3e2e872fb6dddad7a0f87 120777 root:root ../../../linuxcnc/modules/filter_kalman.so -/usr/lib/debug/.build-id/69/5e5575772f530d0ad3e2e872fb6dddad7a0f87.debug 120777 root:root ../../usr/lib/linuxcnc/modules/filter_kalman.so.debug +/usr/lib/debug/.build-id/69/2bd7e3908161841915c6e57ee8d1ad54c0121b 120777 root:root ../../../linuxcnc/modules/mux8.so +/usr/lib/debug/.build-id/69/2bd7e3908161841915c6e57ee8d1ad54c0121b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux8.so.debug /usr/lib/debug/.build-id/6a 40755 root:root -/usr/lib/debug/.build-id/6a/b7ca8bfb41ee4d6707392c873feadabab68773 120777 root:root ../../../linuxcnc/modules/hal_gm.so -/usr/lib/debug/.build-id/6a/b7ca8bfb41ee4d6707392c873feadabab68773.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_gm.so.debug -/usr/lib/debug/.build-id/6a/e4cd21e0a523d6d9acd07a245b33bdfc522d70 120777 root:root ../../../linuxcnc/modules/biquad.so -/usr/lib/debug/.build-id/6a/e4cd21e0a523d6d9acd07a245b33bdfc522d70.debug 120777 root:root ../../usr/lib/linuxcnc/modules/biquad.so.debug +/usr/lib/debug/.build-id/6a/38036842b01d750da2214f7b625af2189ed172 120777 root:root ../../../python3/site-packages/_hal.so +/usr/lib/debug/.build-id/6a/38036842b01d750da2214f7b625af2189ed172.debug 120777 root:root ../../usr/lib/python3/site-packages/_hal.so.debug +/usr/lib/debug/.build-id/6a/59ac8ed361dbca0f29a92f322131e200c4fc34 120777 root:root ../../../linuxcnc/modules/select8.so +/usr/lib/debug/.build-id/6a/59ac8ed361dbca0f29a92f322131e200c4fc34.debug 120777 root:root ../../usr/lib/linuxcnc/modules/select8.so.debug /usr/lib/debug/.build-id/6b 40755 root:root -/usr/lib/debug/.build-id/6b/525913ec3c8e06e7453e858cd642c8de2a0dbc 120777 root:root ../../../linuxcnc/modules/message.so -/usr/lib/debug/.build-id/6b/525913ec3c8e06e7453e858cd642c8de2a0dbc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/message.so.debug -/usr/lib/debug/.build-id/6b/755a8c89f842a5e17465fe45152342416cafe7 120777 root:root ../../../linuxcnc/modules/mesa_7i65.so -/usr/lib/debug/.build-id/6b/755a8c89f842a5e17465fe45152342416cafe7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_7i65.so.debug -/usr/lib/debug/.build-id/6f 40755 root:root -/usr/lib/debug/.build-id/6f/167976e10d4cd8142a46b0b9ee36f1028d34e5 120777 root:root ../../../linuxcnc/modules/histobins.so -/usr/lib/debug/.build-id/6f/167976e10d4cd8142a46b0b9ee36f1028d34e5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/histobins.so.debug -/usr/lib/debug/.build-id/6f/5a2b7a7924ad97cc79673a3282a3fb26d48ebc 120777 root:root ../../../linuxcnc/modules/encoder.so -/usr/lib/debug/.build-id/6f/5a2b7a7924ad97cc79673a3282a3fb26d48ebc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder.so.debug +/usr/lib/debug/.build-id/6b/d2845eb6a6e340cd0c0499d930750750e2f9ac 120777 root:root ../../../linuxcnc/modules/mesa_pktgyro_test.so +/usr/lib/debug/.build-id/6b/d2845eb6a6e340cd0c0499d930750750e2f9ac.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_pktgyro_test.so.debug +/usr/lib/debug/.build-id/6c 40755 root:root +/usr/lib/debug/.build-id/6c/400c319dc77496f8c27d08a0fa683771aa8543 120777 root:root ../../../linuxcnc/modules/lincurve.so +/usr/lib/debug/.build-id/6c/400c319dc77496f8c27d08a0fa683771aa8543.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lincurve.so.debug +/usr/lib/debug/.build-id/6d 40755 root:root +/usr/lib/debug/.build-id/6d/2cfb9e3c76585e2f8bbf3c12ca8a47f949d4c5 120777 root:root ../../../linuxcnc/modules/steptest.so +/usr/lib/debug/.build-id/6d/2cfb9e3c76585e2f8bbf3c12ca8a47f949d4c5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/steptest.so.debug +/usr/lib/debug/.build-id/6e 40755 root:root +/usr/lib/debug/.build-id/6e/5724018f48eeea399ceef593a1d6c995416b36 120777 root:root ../../../linuxcnc/modules/div2.so +/usr/lib/debug/.build-id/6e/5724018f48eeea399ceef593a1d6c995416b36.debug 120777 root:root ../../usr/lib/linuxcnc/modules/div2.so.debug /usr/lib/debug/.build-id/70 40755 root:root -/usr/lib/debug/.build-id/70/9a8e38077fd4510a5cb1cd243bdf1544667201 120777 root:root ../../../linuxcnc/modules/timedelta.so -/usr/lib/debug/.build-id/70/9a8e38077fd4510a5cb1cd243bdf1544667201.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelta.so.debug +/usr/lib/debug/.build-id/70/2e3ce346206f8b61640db7a5fc3ebc9a2d7e2a 120777 root:root ../../../../bin/shuttle +/usr/lib/debug/.build-id/70/2e3ce346206f8b61640db7a5fc3ebc9a2d7e2a.debug 120777 root:root ../../usr/bin/shuttle.debug +/usr/lib/debug/.build-id/70/b2a655c69789ba435fd60aa05f4caaba7009fe 120777 root:root ../../../linuxcnc/modules/conv_bit_float.so +/usr/lib/debug/.build-id/70/b2a655c69789ba435fd60aa05f4caaba7009fe.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_float.so.debug +/usr/lib/debug/.build-id/71 40755 root:root +/usr/lib/debug/.build-id/71/3e738dc4e95e4c9aef0dfda249113edfca1dd4 120777 root:root ../../../linuxcnc/modules/sim_encoder.so +/usr/lib/debug/.build-id/71/3e738dc4e95e4c9aef0dfda249113edfca1dd4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_encoder.so.debug /usr/lib/debug/.build-id/72 40755 root:root -/usr/lib/debug/.build-id/72/42ab54a345918ea80dbc138b8f913a112179e2 120777 root:root ../../../linuxcnc/modules/joyhandle.so -/usr/lib/debug/.build-id/72/42ab54a345918ea80dbc138b8f913a112179e2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/joyhandle.so.debug -/usr/lib/debug/.build-id/72/cd0931b298e05d551700649439e868b1d34341 120777 root:root ../../../linuxcnc/modules/tp.so -/usr/lib/debug/.build-id/72/cd0931b298e05d551700649439e868b1d34341.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tp.so.debug +/usr/lib/debug/.build-id/72/2dcd43798adb1e981e6b1eda86072633d726f3 120777 root:root ../../../linuxcnc/modules/hal_gm.so +/usr/lib/debug/.build-id/72/2dcd43798adb1e981e6b1eda86072633d726f3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_gm.so.debug /usr/lib/debug/.build-id/74 40755 root:root -/usr/lib/debug/.build-id/74/9b135a95dd78110ae07e19846f4537a013423b 120777 root:root ../../../../bin/linuxcnc_module_helper -/usr/lib/debug/.build-id/74/9b135a95dd78110ae07e19846f4537a013423b.debug 120777 root:root ../../usr/bin/linuxcnc_module_helper.debug -/usr/lib/debug/.build-id/75 40755 root:root -/usr/lib/debug/.build-id/75/8078b59305602b95e5a7c618e46c2023d2abdf 120777 root:root ../../../linuxcnc/modules/limit3.so -/usr/lib/debug/.build-id/75/8078b59305602b95e5a7c618e46c2023d2abdf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit3.so.debug -/usr/lib/debug/.build-id/77 40755 root:root -/usr/lib/debug/.build-id/77/2553b83ddb4ab3141f94cc310345a8c0b0e435 120777 root:root ../../../linuxcnc/modules/ohmic.so -/usr/lib/debug/.build-id/77/2553b83ddb4ab3141f94cc310345a8c0b0e435.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ohmic.so.debug +/usr/lib/debug/.build-id/74/77c075811d5ae4796726554df284e34c7acfff 120777 root:root ../../../linuxcnc/modules/tpmod.so +/usr/lib/debug/.build-id/74/77c075811d5ae4796726554df284e34c7acfff.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tpmod.so.debug +/usr/lib/debug/.build-id/76 40755 root:root +/usr/lib/debug/.build-id/76/1048fa239110ff97702bee5d7f77d4b1d424a9 120777 root:root ../../../../bin/genserkins +/usr/lib/debug/.build-id/76/1048fa239110ff97702bee5d7f77d4b1d424a9.debug 120777 root:root ../../usr/bin/genserkins.debug +/usr/lib/debug/.build-id/76/d4f4841ef8826c349e743a4f427b9e73fc30fa 120777 root:root ../../../linuxcnc/modules/histobins.so +/usr/lib/debug/.build-id/76/d4f4841ef8826c349e743a4f427b9e73fc30fa.debug 120777 root:root ../../usr/lib/linuxcnc/modules/histobins.so.debug /usr/lib/debug/.build-id/78 40755 root:root -/usr/lib/debug/.build-id/78/0424e574a2f4b180582b1a46a0fcb0d4c711fe 120777 root:root ../../../../bin/thermistor -/usr/lib/debug/.build-id/78/0424e574a2f4b180582b1a46a0fcb0d4c711fe.debug 120777 root:root ../../usr/bin/thermistor.debug +/usr/lib/debug/.build-id/78/b6ec12f9bc09470ba099075715b804e1e1f9b5 120777 root:root ../../../linuxcnc/modules/multiswitch.so +/usr/lib/debug/.build-id/78/b6ec12f9bc09470ba099075715b804e1e1f9b5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiswitch.so.debug /usr/lib/debug/.build-id/79 40755 root:root -/usr/lib/debug/.build-id/79/03fa5fd13888513b1d44e50b9dabe66b1caeba 120777 root:root ../../../linuxcnc/modules/tristate_float.so -/usr/lib/debug/.build-id/79/03fa5fd13888513b1d44e50b9dabe66b1caeba.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_float.so.debug +/usr/lib/debug/.build-id/79/ee80128ffd3368441650444dec74fadf477667 120777 root:root ../../../linuxcnc/modules/sim_home_switch.so +/usr/lib/debug/.build-id/79/ee80128ffd3368441650444dec74fadf477667.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_home_switch.so.debug /usr/lib/debug/.build-id/7a 40755 root:root -/usr/lib/debug/.build-id/7a/af8a04775100dd1594c50d41492dd158830c7d 120777 root:root ../../../linuxcnc/modules/steptest.so -/usr/lib/debug/.build-id/7a/af8a04775100dd1594c50d41492dd158830c7d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/steptest.so.debug -/usr/lib/debug/.build-id/7a/c4f109a063ee37d3746598a2f86870880c03b1 120777 root:root ../../../linuxcnc/modules/lut5.so -/usr/lib/debug/.build-id/7a/c4f109a063ee37d3746598a2f86870880c03b1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lut5.so.debug -/usr/lib/debug/.build-id/7c 40755 root:root -/usr/lib/debug/.build-id/7c/366d53c6bd348f0e67271ad0e32561634a805c 120777 root:root ../../../linuxcnc/modules/pid.so -/usr/lib/debug/.build-id/7c/366d53c6bd348f0e67271ad0e32561634a805c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pid.so.debug -/usr/lib/debug/.build-id/7c/64885986d9a0e75c60bdbfe4af80813605d69b 120777 root:root ../../../linuxcnc/modules/hal_ppmc.so -/usr/lib/debug/.build-id/7c/64885986d9a0e75c60bdbfe4af80813605d69b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_ppmc.so.debug +/usr/lib/debug/.build-id/7a/188e4ef685628af2eec40f9484e6df2a904aaf 120777 root:root ../../../linuxcnc/modules/toggle2nist.so +/usr/lib/debug/.build-id/7a/188e4ef685628af2eec40f9484e6df2a904aaf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle2nist.so.debug +/usr/lib/debug/.build-id/7d 40755 root:root +/usr/lib/debug/.build-id/7d/40bb0212f1420114216bb8597969330a12cf14 120777 root:root ../../../linuxcnc/modules/toggle.so +/usr/lib/debug/.build-id/7d/40bb0212f1420114216bb8597969330a12cf14.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle.so.debug +/usr/lib/debug/.build-id/7d/451ad165b3ef58c05e6eae6447376f74e391e6 120777 root:root ../../../linuxcnc/modules/dbounce.so +/usr/lib/debug/.build-id/7d/451ad165b3ef58c05e6eae6447376f74e391e6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/dbounce.so.debug +/usr/lib/debug/.build-id/7e 40755 root:root +/usr/lib/debug/.build-id/7e/0d1967cc45bc4bce9c1b0c515a447de2e72da7 120777 root:root ../../../linuxcnc/modules/estop_latch.so +/usr/lib/debug/.build-id/7e/0d1967cc45bc4bce9c1b0c515a447de2e72da7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/estop_latch.so.debug /usr/lib/debug/.build-id/7f 40755 root:root -/usr/lib/debug/.build-id/7f/fff82e923490a2b82bdc2463dbbadd320a97a4 120777 root:root ../../../../bin/linuxcnclcd -/usr/lib/debug/.build-id/7f/fff82e923490a2b82bdc2463dbbadd320a97a4.debug 120777 root:root ../../usr/bin/linuxcnclcd.debug -/usr/lib/debug/.build-id/80 40755 root:root -/usr/lib/debug/.build-id/80/444e9891efa9065f71d74a8363b2f041c775a1 120777 root:root ../../../linuxcnc/modules/scaled_s32_sums.so -/usr/lib/debug/.build-id/80/444e9891efa9065f71d74a8363b2f041c775a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scaled_s32_sums.so.debug +/usr/lib/debug/.build-id/7f/b33cb54a1088d65a78c88810172621c156848c 120777 root:root ../../../linuxcnc/modules/conv_float_s32.so +/usr/lib/debug/.build-id/7f/b33cb54a1088d65a78c88810172621c156848c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_s32.so.debug +/usr/lib/debug/.build-id/7f/e822537556e0a57524713ba71dc615354bf3da 120777 root:root ../../../linuxcnc/modules/xyzac-trt-kins.so +/usr/lib/debug/.build-id/7f/e822537556e0a57524713ba71dc615354bf3da.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzac-trt-kins.so.debug /usr/lib/debug/.build-id/82 40755 root:root -/usr/lib/debug/.build-id/82/4edafa628f63a1fb0e23ae7c8cd9be3e6bdde6 120777 root:root ../../../../bin/xhc-hb04 -/usr/lib/debug/.build-id/82/4edafa628f63a1fb0e23ae7c8cd9be3e6bdde6.debug 120777 root:root ../../usr/bin/xhc-hb04.debug -/usr/lib/debug/.build-id/82/a7c16cefe5ddd4380d99cf10d39129f75aacd0 120777 root:root ../../../../bin/vfs11_vfd -/usr/lib/debug/.build-id/82/a7c16cefe5ddd4380d99cf10d39129f75aacd0.debug 120777 root:root ../../usr/bin/vfs11_vfd.debug -/usr/lib/debug/.build-id/83 40755 root:root -/usr/lib/debug/.build-id/83/84a94ebc17356d36397348b497b5af7d84da6f 120777 root:root ../../../linuxcnc/modules/hal_lib.so -/usr/lib/debug/.build-id/83/84a94ebc17356d36397348b497b5af7d84da6f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_lib.so.debug +/usr/lib/debug/.build-id/82/b6274795022445561b9ffaa486f8895fbd9328 120777 root:root ../../../linuxcnc/modules/sampler.so +/usr/lib/debug/.build-id/82/b6274795022445561b9ffaa486f8895fbd9328.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sampler.so.debug /usr/lib/debug/.build-id/84 40755 root:root -/usr/lib/debug/.build-id/84/795d854ec7f208bc6edc3356d64eea1f846843 120777 root:root ../../../tcl/linuxcnc/hal.so -/usr/lib/debug/.build-id/84/795d854ec7f208bc6edc3356d64eea1f846843.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/hal.so.debug -/usr/lib/debug/.build-id/84/c4fd95d3f7333477a56a88a51857d091948bc4 120777 root:root ../../../linuxcnc/modules/hal_bb_gpio.so -/usr/lib/debug/.build-id/84/c4fd95d3f7333477a56a88a51857d091948bc4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_bb_gpio.so.debug -/usr/lib/debug/.build-id/84/db2a55674b781b2dc744be61ffe882d210c450 120777 root:root ../../../linuxcnc/modules/eoffset_per_angle.so -/usr/lib/debug/.build-id/84/db2a55674b781b2dc744be61ffe882d210c450.debug 120777 root:root ../../usr/lib/linuxcnc/modules/eoffset_per_angle.so.debug +/usr/lib/debug/.build-id/84/41a615a9ec1043dc14966036e3ec96728b2411 120777 root:root ../../../../bin/sendkeys +/usr/lib/debug/.build-id/84/41a615a9ec1043dc14966036e3ec96728b2411.debug 120777 root:root ../../usr/bin/sendkeys.debug /usr/lib/debug/.build-id/85 40755 root:root -/usr/lib/debug/.build-id/85/7c4bb881ffbcca368453ad1ef6a60dd46807f7 120777 root:root ../../../linuxcnc/modules/motmod.so -/usr/lib/debug/.build-id/85/7c4bb881ffbcca368453ad1ef6a60dd46807f7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/motmod.so.debug -/usr/lib/debug/.build-id/86 40755 root:root -/usr/lib/debug/.build-id/86/4bd15072291ca55f43c8274905f12cf25395da 120777 root:root ../../../linuxcnc/modules/hm2_pci.so -/usr/lib/debug/.build-id/86/4bd15072291ca55f43c8274905f12cf25395da.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_pci.so.debug -/usr/lib/debug/.build-id/86/ff316cc22b30921975ec79a5f5ca6c0c25625d 120777 root:root ../../../linuxcnc/modules/weighted_sum.so -/usr/lib/debug/.build-id/86/ff316cc22b30921975ec79a5f5ca6c0c25625d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/weighted_sum.so.debug -/usr/lib/debug/.build-id/87 40755 root:root -/usr/lib/debug/.build-id/87/deda019af17a6eec2010b695485a22fb6b9a33 120777 root:root ../../../linuxcnc/modules/spindle_monitor.so -/usr/lib/debug/.build-id/87/deda019af17a6eec2010b695485a22fb6b9a33.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle_monitor.so.debug +/usr/lib/debug/.build-id/85/b67ee4dbbcee1c6c6ca6cfffdaa699460d6d86 120777 root:root ../../../linuxcnc/modules/lcd.so +/usr/lib/debug/.build-id/85/b67ee4dbbcee1c6c6ca6cfffdaa699460d6d86.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lcd.so.debug +/usr/lib/debug/.build-id/89 40755 root:root +/usr/lib/debug/.build-id/89/f44ae9b2aae3a493ba0b8a65ff34ea83b10988 120777 root:root ../../../linuxcnc/modules/plasmac.so +/usr/lib/debug/.build-id/89/f44ae9b2aae3a493ba0b8a65ff34ea83b10988.debug 120777 root:root ../../usr/lib/linuxcnc/modules/plasmac.so.debug /usr/lib/debug/.build-id/8a 40755 root:root -/usr/lib/debug/.build-id/8a/7aded44620793864290737405dd47bfa3edeb7 120777 root:root ../../../linuxcnc/modules/offset.so -/usr/lib/debug/.build-id/8a/7aded44620793864290737405dd47bfa3edeb7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/offset.so.debug +/usr/lib/debug/.build-id/8a/1b306e3f5bc982f5b35262a57e372e5cccf726 120777 root:root ../../../linuxcnc/modules/clarkeinv.so +/usr/lib/debug/.build-id/8a/1b306e3f5bc982f5b35262a57e372e5cccf726.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarkeinv.so.debug +/usr/lib/debug/.build-id/8c 40755 root:root +/usr/lib/debug/.build-id/8c/e3865791d0ef333fb8552feb61015cc472345c 120777 root:root ../../../linuxcnc/modules/pid.so +/usr/lib/debug/.build-id/8c/e3865791d0ef333fb8552feb61015cc472345c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pid.so.debug /usr/lib/debug/.build-id/8d 40755 root:root -/usr/lib/debug/.build-id/8d/74bb87702fe1a9991708612bbc5c5cd6039fab 120777 root:root ../../../linuxcnc/modules/bitslice.so -/usr/lib/debug/.build-id/8d/74bb87702fe1a9991708612bbc5c5cd6039fab.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitslice.so.debug +/usr/lib/debug/.build-id/8d/099c86f9990eaa2bf7fe032812dae0ad190f3d 120777 root:root ../../../linuxcnc/modules/pumakins.so +/usr/lib/debug/.build-id/8d/099c86f9990eaa2bf7fe032812dae0ad190f3d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pumakins.so.debug +/usr/lib/debug/.build-id/8d/4d4dadb415d780ad62bbefa43f043f5bbee83a 120777 root:root ../../../python3/site-packages/gcode.so +/usr/lib/debug/.build-id/8d/4d4dadb415d780ad62bbefa43f043f5bbee83a.debug 120777 root:root ../../usr/lib/python3/site-packages/gcode.so.debug /usr/lib/debug/.build-id/8e 40755 root:root -/usr/lib/debug/.build-id/8e/c2cb7a879f8718a30060d70071622c40492fcf 120777 root:root ../../../linuxcnc/modules/streamer.so -/usr/lib/debug/.build-id/8e/c2cb7a879f8718a30060d70071622c40492fcf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/streamer.so.debug +/usr/lib/debug/.build-id/8e/821b0c116eb13afaa4eb8e65483a0d6eb7f100 120777 root:root ../../../../bin/tool_mmap_read +/usr/lib/debug/.build-id/8e/821b0c116eb13afaa4eb8e65483a0d6eb7f100.debug 120777 root:root ../../usr/bin/tool_mmap_read.debug /usr/lib/debug/.build-id/8f 40755 root:root -/usr/lib/debug/.build-id/8f/2b5116e42a4c7b64ccece538b4435ea8356a3b 120777 root:root ../../../linuxcnc/modules/conv_bit_float.so -/usr/lib/debug/.build-id/8f/2b5116e42a4c7b64ccece538b4435ea8356a3b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_float.so.debug -/usr/lib/debug/.build-id/8f/d7b096174d7c05c121454672ff6bd237997040 120777 root:root ../../../linuxcnc/modules/dbounce.so -/usr/lib/debug/.build-id/8f/d7b096174d7c05c121454672ff6bd237997040.debug 120777 root:root ../../usr/lib/linuxcnc/modules/dbounce.so.debug -/usr/lib/debug/.build-id/90 40755 root:root -/usr/lib/debug/.build-id/90/168af1be5890f57ab3e6c1b38f3fd74130dd37 120777 root:root ../../../linuxcnc/modules/mux_generic.so -/usr/lib/debug/.build-id/90/168af1be5890f57ab3e6c1b38f3fd74130dd37.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux_generic.so.debug -/usr/lib/debug/.build-id/91 40755 root:root -/usr/lib/debug/.build-id/91/73893d26e919bdf79a14dd5b80ac5322eed4f6 120777 root:root ../../../linuxcnc/modules/conv_u32_float.so -/usr/lib/debug/.build-id/91/73893d26e919bdf79a14dd5b80ac5322eed4f6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_float.so.debug -/usr/lib/debug/.build-id/93 40755 root:root -/usr/lib/debug/.build-id/93/2f32c2e65cf9a3fd3ab5e37a93406ed4422228 120777 root:root ../../../linuxcnc/modules/div2.so -/usr/lib/debug/.build-id/93/2f32c2e65cf9a3fd3ab5e37a93406ed4422228.debug 120777 root:root ../../usr/lib/linuxcnc/modules/div2.so.debug +/usr/lib/debug/.build-id/8f/7b95eb80aee15e1fa987d1b324dda58152a1f0 120777 root:root ../../../../bin/hy_gt_vfd +/usr/lib/debug/.build-id/8f/7b95eb80aee15e1fa987d1b324dda58152a1f0.debug 120777 root:root ../../usr/bin/hy_gt_vfd.debug +/usr/lib/debug/.build-id/92 40755 root:root +/usr/lib/debug/.build-id/92/005e7334e213e810448a216941dc337a9f54ac 120777 root:root ../../../linuxcnc/modules/anglejog.so +/usr/lib/debug/.build-id/92/005e7334e213e810448a216941dc337a9f54ac.debug 120777 root:root ../../usr/lib/linuxcnc/modules/anglejog.so.debug +/usr/lib/debug/.build-id/92/0ccb0262325de7486c3eb84981652c7bdbdb3d 120777 root:root ../../../../bin/linuxcnclcd +/usr/lib/debug/.build-id/92/0ccb0262325de7486c3eb84981652c7bdbdb3d.debug 120777 root:root ../../usr/bin/linuxcnclcd.debug +/usr/lib/debug/.build-id/92/3108d3d6d910f5e8a8d6643b99f46024ece1a4 120777 root:root ../../../linuxcnc/modules/motmod.so +/usr/lib/debug/.build-id/92/3108d3d6d910f5e8a8d6643b99f46024ece1a4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/motmod.so.debug +/usr/lib/debug/.build-id/92/92bf459b25b706b9de96989afc052749878f87 120777 root:root ../../../linuxcnc/modules/conv_s32_bit.so +/usr/lib/debug/.build-id/92/92bf459b25b706b9de96989afc052749878f87.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_bit.so.debug /usr/lib/debug/.build-id/94 40755 root:root -/usr/lib/debug/.build-id/94/85ced31d30b9b0636bb5017ec56ea84b7d0ba3 120777 root:root ../../../../bin/linuxcncsvr -/usr/lib/debug/.build-id/94/85ced31d30b9b0636bb5017ec56ea84b7d0ba3.debug 120777 root:root ../../usr/bin/linuxcncsvr.debug +/usr/lib/debug/.build-id/94/64a39a78a21eeac22e39d3523aa0d588c71cda 120777 root:root ../../../../bin/tool_watch +/usr/lib/debug/.build-id/94/64a39a78a21eeac22e39d3523aa0d588c71cda.debug 120777 root:root ../../usr/bin/tool_watch.debug +/usr/lib/debug/.build-id/94/8d7c115162318dbb67743009c2964a356e227d 120777 root:root ../../../linuxcnc/modules/classicladder_rt.so +/usr/lib/debug/.build-id/94/8d7c115162318dbb67743009c2964a356e227d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/classicladder_rt.so.debug /usr/lib/debug/.build-id/95 40755 root:root -/usr/lib/debug/.build-id/95/23483bb1fdfa331ea03ea369e41f6adb678fae 120777 root:root ../../../linuxcnc/modules/edge.so -/usr/lib/debug/.build-id/95/23483bb1fdfa331ea03ea369e41f6adb678fae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/edge.so.debug /usr/lib/debug/.build-id/95/5f0ed1254d6b73ff6122504fce513128bafc23 120777 root:root ../../../linuxcnc/modules/tripodkins.so /usr/lib/debug/.build-id/95/5f0ed1254d6b73ff6122504fce513128bafc23.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tripodkins.so.debug +/usr/lib/debug/.build-id/95/ace6e8891728d0350879566cbb1d591c53eb89 120777 root:root ../../../../bin/xhc-hb04 +/usr/lib/debug/.build-id/95/ace6e8891728d0350879566cbb1d591c53eb89.debug 120777 root:root ../../usr/bin/xhc-hb04.debug /usr/lib/debug/.build-id/98 40755 root:root -/usr/lib/debug/.build-id/98/dee91691d580a5a25b429fe78c4ff519253128 120777 root:root ../../../linuxcnc/modules/ddt.so -/usr/lib/debug/.build-id/98/dee91691d580a5a25b429fe78c4ff519253128.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ddt.so.debug +/usr/lib/debug/.build-id/98/556231195458a83f67570955ebf7aedab49525 120777 root:root ../../../linuxcnc/modules/mult2.so +/usr/lib/debug/.build-id/98/556231195458a83f67570955ebf7aedab49525.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mult2.so.debug +/usr/lib/debug/.build-id/98/ee2b7b9941f255c749619bd86103dc9c5939f7 120777 root:root ../../../linuxcnc/modules/rotarydeltakins.so +/usr/lib/debug/.build-id/98/ee2b7b9941f255c749619bd86103dc9c5939f7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotarydeltakins.so.debug +/usr/lib/debug/.build-id/99 40755 root:root +/usr/lib/debug/.build-id/99/0073ce25276d301be1535b82c662b97721afda 120777 root:root ../../../linuxcnc/modules/ton.so +/usr/lib/debug/.build-id/99/0073ce25276d301be1535b82c662b97721afda.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ton.so.debug +/usr/lib/debug/.build-id/9a 40755 root:root +/usr/lib/debug/.build-id/9a/055372f198d5f436df04f11974f30a9e21563f 120777 root:root ../../../linuxcnc/modules/tp.so +/usr/lib/debug/.build-id/9a/055372f198d5f436df04f11974f30a9e21563f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tp.so.debug /usr/lib/debug/.build-id/9b 40755 root:root -/usr/lib/debug/.build-id/9b/04bae22c5e9cfc06886a823e9c4d00db6132f8 120777 root:root ../../../linuxcnc/modules/sim_matrix_kb.so -/usr/lib/debug/.build-id/9b/04bae22c5e9cfc06886a823e9c4d00db6132f8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_matrix_kb.so.debug +/usr/lib/debug/.build-id/9b/3f73762b5ee2b3904d45b52367c537cb82bdd6 120777 root:root ../../../../bin/halscope +/usr/lib/debug/.build-id/9b/3f73762b5ee2b3904d45b52367c537cb82bdd6.debug 120777 root:root ../../usr/bin/halscope.debug +/usr/lib/debug/.build-id/9b/b2bf7576b35a09cbdd1a7e32e31480c485ff8a 120777 root:root ../../../linuxcnc/modules/offset.so +/usr/lib/debug/.build-id/9b/b2bf7576b35a09cbdd1a7e32e31480c485ff8a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/offset.so.debug /usr/lib/debug/.build-id/9c 40755 root:root -/usr/lib/debug/.build-id/9c/2990ae169dbd6b2179cd4870129ec8660fa4fa 120777 root:root ../../../linuxcnc/modules/userkins.so -/usr/lib/debug/.build-id/9c/2990ae169dbd6b2179cd4870129ec8660fa4fa.debug 120777 root:root ../../usr/lib/linuxcnc/modules/userkins.so.debug -/usr/lib/debug/.build-id/9d 40755 root:root -/usr/lib/debug/.build-id/9d/c7238467775720b8839cd228cab0e1523da94a 120777 root:root ../../../../bin/io -/usr/lib/debug/.build-id/9d/c7238467775720b8839cd228cab0e1523da94a.debug 120777 root:root ../../usr/bin/io.debug -/usr/lib/debug/.build-id/9d/ceb1add5e10ef4f972bc76d75fcff1535567de 120777 root:root ../../../linuxcnc/modules/axistest.so -/usr/lib/debug/.build-id/9d/ceb1add5e10ef4f972bc76d75fcff1535567de.debug 120777 root:root ../../usr/lib/linuxcnc/modules/axistest.so.debug -/usr/lib/debug/.build-id/9e 40755 root:root -/usr/lib/debug/.build-id/9e/205a2a9f33db0633c1d0a352d435f54331ff26 120777 root:root ../../../linuxcnc/modules/or2.so -/usr/lib/debug/.build-id/9e/205a2a9f33db0633c1d0a352d435f54331ff26.debug 120777 root:root ../../usr/lib/linuxcnc/modules/or2.so.debug +/usr/lib/debug/.build-id/9c/5251cb065244ad4cec5843b68bb842b9d70dca 120777 root:root ../../../linuxcnc/modules/hal_lib.so +/usr/lib/debug/.build-id/9c/5251cb065244ad4cec5843b68bb842b9d70dca.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_lib.so.debug +/usr/lib/debug/.build-id/9c/7eb2bff9c48ba12c41f32c6fc7b7f1707f3631 120777 root:root ../../../linuxcnc/modules/xhc_hb04_util.so +/usr/lib/debug/.build-id/9c/7eb2bff9c48ba12c41f32c6fc7b7f1707f3631.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xhc_hb04_util.so.debug /usr/lib/debug/.build-id/9f 40755 root:root -/usr/lib/debug/.build-id/9f/e0485acfdc9a1aebb1585a10749812d4e94629 120777 root:root ../../../linuxcnc/modules/hm2_7i90.so -/usr/lib/debug/.build-id/9f/e0485acfdc9a1aebb1585a10749812d4e94629.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i90.so.debug -/usr/lib/debug/.build-id/9f/efb9bd8b69ed1fd5511ddae1fb85d83c4e5a2c 120777 root:root ../../../linuxcnc/modules/minmax.so -/usr/lib/debug/.build-id/9f/efb9bd8b69ed1fd5511ddae1fb85d83c4e5a2c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/minmax.so.debug -/usr/lib/debug/.build-id/a1 40755 root:root -/usr/lib/debug/.build-id/a1/1e0c4d0212f7d080ccb16863323ba1c7498767 120777 root:root ../../../linuxcnc/modules/feedcomp.so -/usr/lib/debug/.build-id/a1/1e0c4d0212f7d080ccb16863323ba1c7498767.debug 120777 root:root ../../usr/lib/linuxcnc/modules/feedcomp.so.debug -/usr/lib/debug/.build-id/a1/5f6237e525484e59a0fca9c99127f5cb491455 120777 root:root ../../../../bin/tool_watch -/usr/lib/debug/.build-id/a1/5f6237e525484e59a0fca9c99127f5cb491455.debug 120777 root:root ../../usr/bin/tool_watch.debug +/usr/lib/debug/.build-id/9f/d9491efd9b6d5fa7eaf45df814fbce9bbda8a9 120777 root:root ../../../../bin/vfdb_vfd +/usr/lib/debug/.build-id/9f/d9491efd9b6d5fa7eaf45df814fbce9bbda8a9.debug 120777 root:root ../../usr/bin/vfdb_vfd.debug /usr/lib/debug/.build-id/a3 40755 root:root -/usr/lib/debug/.build-id/a3/b928cf540b30e5404f77a0edd7fd8416d4aab0 120777 root:root ../../../linuxcnc/modules/mesa_uart.so -/usr/lib/debug/.build-id/a3/b928cf540b30e5404f77a0edd7fd8416d4aab0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_uart.so.debug +/usr/lib/debug/.build-id/a3/2689352db7571117adf46c79321a42f368cd59 120777 root:root ../../../linuxcnc/modules/genhexkins.so +/usr/lib/debug/.build-id/a3/2689352db7571117adf46c79321a42f368cd59.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genhexkins.so.debug +/usr/lib/debug/.build-id/a3/948698d6ee384fcf3ca03023dce59f062834c6 120777 root:root ../../../linuxcnc/modules/conv_s32_u32.so +/usr/lib/debug/.build-id/a3/948698d6ee384fcf3ca03023dce59f062834c6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_u32.so.debug +/usr/lib/debug/.build-id/a3/9488b4dc13ee19b094274533f87629de9103d0 120777 root:root ../../../linuxcnc/modules/setsserial.so +/usr/lib/debug/.build-id/a3/9488b4dc13ee19b094274533f87629de9103d0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/setsserial.so.debug /usr/lib/debug/.build-id/a4 40755 root:root -/usr/lib/debug/.build-id/a4/cc843d551e9a08240552e183c1847a66cdf02f 120777 root:root ../../../linuxcnc/modules/conv_bit_s32.so -/usr/lib/debug/.build-id/a4/cc843d551e9a08240552e183c1847a66cdf02f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_s32.so.debug +/usr/lib/debug/.build-id/a4/6fa7a409560be2ceed3dccdefb0c799b3baf5a 120777 root:root ../../../linuxcnc/modules/bldc.so +/usr/lib/debug/.build-id/a4/6fa7a409560be2ceed3dccdefb0c799b3baf5a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bldc.so.debug +/usr/lib/debug/.build-id/a4/bb35b7b291fac971903718593e712f5a4b426a 120777 root:root ../../../../bin/inivar +/usr/lib/debug/.build-id/a4/bb35b7b291fac971903718593e712f5a4b426a.debug 120777 root:root ../../usr/bin/inivar.debug +/usr/lib/debug/.build-id/a4/dc4e6d468b12792b0e36c4720ac9d12d5fcfcd 120777 root:root ../../../python3/site-packages/_togl.so +/usr/lib/debug/.build-id/a4/dc4e6d468b12792b0e36c4720ac9d12d5fcfcd.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug /usr/lib/debug/.build-id/a5 40755 root:root -/usr/lib/debug/.build-id/a5/da0204f8211c2cc7674c6c5d5fbf37080276dd 120777 root:root ../../../python3/site-packages/linuxcnc.so -/usr/lib/debug/.build-id/a5/da0204f8211c2cc7674c6c5d5fbf37080276dd.debug 120777 root:root ../../usr/lib/python3/site-packages/linuxcnc.so.debug +/usr/lib/debug/.build-id/a5/a95f66c7cadb57cfb10c5fe627729eba606e99 120777 root:root ../../../linuxcnc/modules/sample_hold.so +/usr/lib/debug/.build-id/a5/a95f66c7cadb57cfb10c5fe627729eba606e99.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sample_hold.so.debug /usr/lib/debug/.build-id/a6 40755 root:root -/usr/lib/debug/.build-id/a6/336140f774f725f3caf8327833b9f52977747f 120777 root:root ../../../linuxcnc/modules/clarke3.so -/usr/lib/debug/.build-id/a6/336140f774f725f3caf8327833b9f52977747f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke3.so.debug +/usr/lib/debug/.build-id/a6/37922b249449450da6002800f42ecbaa810e0e 120777 root:root ../../../linuxcnc/modules/thcud.so +/usr/lib/debug/.build-id/a6/37922b249449450da6002800f42ecbaa810e0e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thcud.so.debug +/usr/lib/debug/.build-id/a6/bd13d76d56bbec7e53f5c306a5836d06b2569a 120777 root:root ../../../../bin/panelui +/usr/lib/debug/.build-id/a6/bd13d76d56bbec7e53f5c306a5836d06b2569a.debug 120777 root:root ../../usr/bin/panelui.debug /usr/lib/debug/.build-id/a7 40755 root:root -/usr/lib/debug/.build-id/a7/21cba731799409897833c2061c6a932c03ce7a 120777 root:root ../../../linuxcnc/modules/sim_encoder.so -/usr/lib/debug/.build-id/a7/21cba731799409897833c2061c6a932c03ce7a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_encoder.so.debug +/usr/lib/debug/.build-id/a7/44f19805db4e31784e4460a35197679d93c638 120777 root:root ../../../python3/site-packages/rotarydeltakins.so +/usr/lib/debug/.build-id/a7/44f19805db4e31784e4460a35197679d93c638.debug 120777 root:root ../../usr/lib/python3/site-packages/rotarydeltakins.so.debug +/usr/lib/debug/.build-id/a7/d1af1dda16c2dd15f3b56233837af3dc30bb43 120777 root:root ../../../linuxcnc/modules/timedelta.so +/usr/lib/debug/.build-id/a7/d1af1dda16c2dd15f3b56233837af3dc30bb43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelta.so.debug /usr/lib/debug/.build-id/a8 40755 root:root +/usr/lib/debug/.build-id/a8/0cbbca82c587bc5cec50fd32a7da34889db54a 120777 root:root ../../../linuxcnc/modules/feedcomp.so +/usr/lib/debug/.build-id/a8/0cbbca82c587bc5cec50fd32a7da34889db54a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/feedcomp.so.debug /usr/lib/debug/.build-id/a8/3f794bad5dd6ebd6ffd994b88583cfb8492e9c 120777 root:root ../../../linuxcnc/modules/threads.so /usr/lib/debug/.build-id/a8/3f794bad5dd6ebd6ffd994b88583cfb8492e9c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/threads.so.debug -/usr/lib/debug/.build-id/a8/501fc6952c2692a06a09e50d16286e0f2be69b 120777 root:root ../../../linuxcnc/modules/conv_u32_s32.so -/usr/lib/debug/.build-id/a8/501fc6952c2692a06a09e50d16286e0f2be69b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_s32.so.debug /usr/lib/debug/.build-id/a9 40755 root:root -/usr/lib/debug/.build-id/a9/99350747cd7beb0df928f93a8c0657c6f94058 120777 root:root ../../../linuxcnc/modules/xyzbc-trt-kins.so -/usr/lib/debug/.build-id/a9/99350747cd7beb0df928f93a8c0657c6f94058.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzbc-trt-kins.so.debug +/usr/lib/debug/.build-id/a9/4bcc8bd8b74ba0e351e3809778c150a040cf52 120777 root:root ../../../linuxcnc/modules/hm2_pci.so +/usr/lib/debug/.build-id/a9/4bcc8bd8b74ba0e351e3809778c150a040cf52.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_pci.so.debug /usr/lib/debug/.build-id/aa 40755 root:root -/usr/lib/debug/.build-id/aa/b7cf8669cfbf918bc0568e71b6c2a6c594547a 120777 root:root ../../../linuxcnc/modules/hm2_rpspi.so -/usr/lib/debug/.build-id/aa/b7cf8669cfbf918bc0568e71b6c2a6c594547a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_rpspi.so.debug +/usr/lib/debug/.build-id/aa/e4fe34225f9b939377d50f94d571cbf20226e2 120777 root:root ../../../linuxcnc/modules/logic.so +/usr/lib/debug/.build-id/aa/e4fe34225f9b939377d50f94d571cbf20226e2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/logic.so.debug /usr/lib/debug/.build-id/ab 40755 root:root -/usr/lib/debug/.build-id/ab/0783659d8555eb8363d240155f5e353a10bc7d 120777 root:root ../../../../bin/halscope -/usr/lib/debug/.build-id/ab/0783659d8555eb8363d240155f5e353a10bc7d.debug 120777 root:root ../../usr/bin/halscope.debug +/usr/lib/debug/.build-id/ab/2a7d0fd211d0c44a0ff2ca002ed29c36bcaf99 120777 root:root ../../../../bin/svd-ps_vfd +/usr/lib/debug/.build-id/ab/2a7d0fd211d0c44a0ff2ca002ed29c36bcaf99.debug 120777 root:root ../../usr/bin/svd-ps_vfd.debug +/usr/lib/debug/.build-id/ab/e45009857724248eae7b1381e166a18c311797 120777 root:root ../../../../bin/halstreamer +/usr/lib/debug/.build-id/ab/e45009857724248eae7b1381e166a18c311797.debug 120777 root:root ../../usr/bin/halstreamer.debug /usr/lib/debug/.build-id/ac 40755 root:root -/usr/lib/debug/.build-id/ac/b14898c2d53aa5b236adbdbd22ba60dad133e7 120777 root:root ../../../../bin/halsampler -/usr/lib/debug/.build-id/ac/b14898c2d53aa5b236adbdbd22ba60dad133e7.debug 120777 root:root ../../usr/bin/halsampler.debug -/usr/lib/debug/.build-id/ac/fcbbbd7db93a8b1a018701021770a708eed704 120777 root:root ../../../linuxcnc/modules/conv_u32_bit.so -/usr/lib/debug/.build-id/ac/fcbbbd7db93a8b1a018701021770a708eed704.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_bit.so.debug +/usr/lib/debug/.build-id/ac/1f52e6b26db2f8641edd0390c0936bb04df8f8 120777 root:root ../../../../bin/linuxcncrsh +/usr/lib/debug/.build-id/ac/1f52e6b26db2f8641edd0390c0936bb04df8f8.debug 120777 root:root ../../usr/bin/linuxcncrsh.debug +/usr/lib/debug/.build-id/ad 40755 root:root +/usr/lib/debug/.build-id/ad/9b1f085dafb5b255216d0248cd0f2c42efe0a7 120777 root:root ../../../linuxcnc/modules/ddt.so +/usr/lib/debug/.build-id/ad/9b1f085dafb5b255216d0248cd0f2c42efe0a7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ddt.so.debug /usr/lib/debug/.build-id/ae 40755 root:root -/usr/lib/debug/.build-id/ae/f34117f1a5ab109cbd8c7fe29e3f8cd8da9bb1 120777 root:root ../../../linuxcnc/modules/mux16.so -/usr/lib/debug/.build-id/ae/f34117f1a5ab109cbd8c7fe29e3f8cd8da9bb1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux16.so.debug -/usr/lib/debug/.build-id/af 40755 root:root -/usr/lib/debug/.build-id/af/26c682c64a20619e5b8ed52825cc7e775f92f3 120777 root:root ../../../linuxcnc/modules/oneshot.so -/usr/lib/debug/.build-id/af/26c682c64a20619e5b8ed52825cc7e775f92f3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/oneshot.so.debug -/usr/lib/debug/.build-id/af/e97011dd16c965c288bfb897afa231bba7ec4f 120777 root:root ../../../linuxcnc/modules/modmath.so -/usr/lib/debug/.build-id/af/e97011dd16c965c288bfb897afa231bba7ec4f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/modmath.so.debug +/usr/lib/debug/.build-id/ae/d859e4f4f10c5449ee0e930f201fba999e034a 120777 root:root ../../../linuxcnc/modules/userkins.so +/usr/lib/debug/.build-id/ae/d859e4f4f10c5449ee0e930f201fba999e034a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/userkins.so.debug /usr/lib/debug/.build-id/b0 40755 root:root -/usr/lib/debug/.build-id/b0/5a7a06d60e1679e1c7de628c0eb13e478dbc3a 120777 root:root ../../../../bin/hy_gt_vfd -/usr/lib/debug/.build-id/b0/5a7a06d60e1679e1c7de628c0eb13e478dbc3a.debug 120777 root:root ../../usr/bin/hy_gt_vfd.debug -/usr/lib/debug/.build-id/b0/f9201f1844da3a3b8cbed691f714a5e41a9694 120777 root:root ../../../linuxcnc/modules/setsserial.so -/usr/lib/debug/.build-id/b0/f9201f1844da3a3b8cbed691f714a5e41a9694.debug 120777 root:root ../../usr/lib/linuxcnc/modules/setsserial.so.debug +/usr/lib/debug/.build-id/b0/158d45cfcaf7c58006fb246fb01b0f09934da4 120777 root:root ../../../linuxcnc/modules/hal_bb_gpio.so +/usr/lib/debug/.build-id/b0/158d45cfcaf7c58006fb246fb01b0f09934da4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_bb_gpio.so.debug /usr/lib/debug/.build-id/b1 40755 root:root -/usr/lib/debug/.build-id/b1/b10189b596dde02493c55a8e2637be494677a1 120777 root:root ../../../linuxcnc/modules/integ.so -/usr/lib/debug/.build-id/b1/b10189b596dde02493c55a8e2637be494677a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/integ.so.debug -/usr/lib/debug/.build-id/b1/b86e24ec614c6e2effeb88d44af16700cd89af 120777 root:root ../../../linuxcnc/modules/sphereprobe.so -/usr/lib/debug/.build-id/b1/b86e24ec614c6e2effeb88d44af16700cd89af.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sphereprobe.so.debug -/usr/lib/debug/.build-id/b2 40755 root:root -/usr/lib/debug/.build-id/b2/571b662650a400524881063d93b46f98b26df1 120777 root:root ../../../linuxcnc/modules/hm2_7i43.so -/usr/lib/debug/.build-id/b2/571b662650a400524881063d93b46f98b26df1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i43.so.debug +/usr/lib/debug/.build-id/b1/a904e9f1867791722ab82e834cfca00c1a45de 120777 root:root ../../../linuxcnc/modules/encoder.so +/usr/lib/debug/.build-id/b1/a904e9f1867791722ab82e834cfca00c1a45de.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder.so.debug /usr/lib/debug/.build-id/b4 40755 root:root -/usr/lib/debug/.build-id/b4/dd1b26403f3c6913e2a8c34c1004c3a445f7da 120777 root:root ../../../linuxcnc/modules/latencybins.so -/usr/lib/debug/.build-id/b4/dd1b26403f3c6913e2a8c34c1004c3a445f7da.debug 120777 root:root ../../usr/lib/linuxcnc/modules/latencybins.so.debug -/usr/lib/debug/.build-id/b5 40755 root:root -/usr/lib/debug/.build-id/b5/b111fdef6a77660345ad58f606fced8216e926 120777 root:root ../../../linuxcnc/modules/tristate_bit.so -/usr/lib/debug/.build-id/b5/b111fdef6a77660345ad58f606fced8216e926.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_bit.so.debug +/usr/lib/debug/.build-id/b4/7b0d55a1a27fce2e48c44fc5b14c49b7df22b3 120777 root:root ../../../linuxcnc/modules/tristate_float.so +/usr/lib/debug/.build-id/b4/7b0d55a1a27fce2e48c44fc5b14c49b7df22b3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_float.so.debug +/usr/lib/debug/.build-id/b6 40755 root:root +/usr/lib/debug/.build-id/b6/46efd1ddb2c0c328b27ff0e20fb9262e369a2c 120777 root:root ../../../../bin/halui +/usr/lib/debug/.build-id/b6/46efd1ddb2c0c328b27ff0e20fb9262e369a2c.debug 120777 root:root ../../usr/bin/halui.debug /usr/lib/debug/.build-id/b7 40755 root:root -/usr/lib/debug/.build-id/b7/7ecbc2c9f5faf727e50279a62def432884b3ea 120777 root:root ../../../linuxcnc/modules/multiswitch.so -/usr/lib/debug/.build-id/b7/7ecbc2c9f5faf727e50279a62def432884b3ea.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiswitch.so.debug -/usr/lib/debug/.build-id/b8 40755 root:root -/usr/lib/debug/.build-id/b8/8302481ba043349f916cde309dcba0f7f71326 120777 root:root ../../../linuxcnc/modules/sim_parport.so -/usr/lib/debug/.build-id/b8/8302481ba043349f916cde309dcba0f7f71326.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_parport.so.debug -/usr/lib/debug/.build-id/b8/94c4f8a97acb474d9082e403b74f2eebea1584 120777 root:root ../../../linuxcnc/modules/sum2.so -/usr/lib/debug/.build-id/b8/94c4f8a97acb474d9082e403b74f2eebea1584.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sum2.so.debug -/usr/lib/debug/.build-id/b8/a51b4f1f19480978737a2ee6c14c1ee0740b79 120777 root:root ../../../../bin/halui -/usr/lib/debug/.build-id/b8/a51b4f1f19480978737a2ee6c14c1ee0740b79.debug 120777 root:root ../../usr/bin/halui.debug +/usr/lib/debug/.build-id/b7/553c2678877dd950b17a1e5e1f7cfafe4050b6 120777 root:root ../../../linuxcnc/modules/charge_pump.so +/usr/lib/debug/.build-id/b7/553c2678877dd950b17a1e5e1f7cfafe4050b6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/charge_pump.so.debug /usr/lib/debug/.build-id/b9 40755 root:root -/usr/lib/debug/.build-id/b9/0eb10650d083b4900cc20975db04f138275174 120777 root:root ../../../linuxcnc/modules/toggle2nist.so -/usr/lib/debug/.build-id/b9/0eb10650d083b4900cc20975db04f138275174.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle2nist.so.debug -/usr/lib/debug/.build-id/b9/72dd0b3ade3b977e7d925ef0b7db603a87ee7c 120777 root:root ../../../linuxcnc/modules/sim_spindle.so -/usr/lib/debug/.build-id/b9/72dd0b3ade3b977e7d925ef0b7db603a87ee7c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_spindle.so.debug /usr/lib/debug/.build-id/b9/79bbe1708733d4cfe3c083aa71ea1cc180fa14 120777 root:root ../../../linuxcnc/modules/pwmgen.so /usr/lib/debug/.build-id/b9/79bbe1708733d4cfe3c083aa71ea1cc180fa14.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pwmgen.so.debug -/usr/lib/debug/.build-id/bb 40755 root:root -/usr/lib/debug/.build-id/bb/a0021c3e410a9700337320f104b9bc38857fa0 120777 root:root ../../../../bin/gs2_vfd -/usr/lib/debug/.build-id/bb/a0021c3e410a9700337320f104b9bc38857fa0.debug 120777 root:root ../../usr/bin/gs2_vfd.debug +/usr/lib/debug/.build-id/ba 40755 root:root +/usr/lib/debug/.build-id/ba/86aa7cde6aa0470c0ee44ac46e5c4fcae71ae3 120777 root:root ../../../linuxcnc/modules/hm2_7i43.so +/usr/lib/debug/.build-id/ba/86aa7cde6aa0470c0ee44ac46e5c4fcae71ae3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i43.so.debug +/usr/lib/debug/.build-id/ba/c0847bf4880c7fe97fb87234b933cb6905f1f4 120777 root:root ../../../../bin/xhc-whb04b-6 +/usr/lib/debug/.build-id/ba/c0847bf4880c7fe97fb87234b933cb6905f1f4.debug 120777 root:root ../../usr/bin/xhc-whb04b-6.debug +/usr/lib/debug/.build-id/ba/c1698b66cde8bc075eed6759bec88fe42d6107 120777 root:root ../../../linuxcnc/modules/streamer.so +/usr/lib/debug/.build-id/ba/c1698b66cde8bc075eed6759bec88fe42d6107.debug 120777 root:root ../../usr/lib/linuxcnc/modules/streamer.so.debug /usr/lib/debug/.build-id/bc 40755 root:root -/usr/lib/debug/.build-id/bc/2a1851e033798e37b3b3cae8a2dff121461644 120777 root:root ../../../../bin/shuttle -/usr/lib/debug/.build-id/bc/2a1851e033798e37b3b3cae8a2dff121461644.debug 120777 root:root ../../usr/bin/shuttle.debug -/usr/lib/debug/.build-id/bc/ba17b5c3b5f26d1a6d7328c2b858dbc2aa51a0 120777 root:root ../../../../bin/linuxcncrsh -/usr/lib/debug/.build-id/bc/ba17b5c3b5f26d1a6d7328c2b858dbc2aa51a0.debug 120777 root:root ../../usr/bin/linuxcncrsh.debug -/usr/lib/debug/.build-id/bc/db0ff2daf5a71f2067a15cdea750a46f6d15d1 120777 root:root ../../../python3/site-packages/lineardeltakins.so -/usr/lib/debug/.build-id/bc/db0ff2daf5a71f2067a15cdea750a46f6d15d1.debug 120777 root:root ../../usr/lib/python3/site-packages/lineardeltakins.so.debug +/usr/lib/debug/.build-id/bc/2e25d70c459f20e468af7a062b5592dc445ce6 120777 root:root ../../../linuxcnc/modules/ilowpass.so +/usr/lib/debug/.build-id/bc/2e25d70c459f20e468af7a062b5592dc445ce6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ilowpass.so.debug +/usr/lib/debug/.build-id/bc/5e64cd11f892d5bba7894bbfe1fbd006126832 120777 root:root ../../../../bin/halsampler +/usr/lib/debug/.build-id/bc/5e64cd11f892d5bba7894bbfe1fbd006126832.debug 120777 root:root ../../usr/bin/halsampler.debug /usr/lib/debug/.build-id/bd 40755 root:root -/usr/lib/debug/.build-id/bd/76e8de97a91bdf3bc52b765dcbb17b2e308b01 120777 root:root ../../../linuxcnc/modules/xyzac-trt-kins.so -/usr/lib/debug/.build-id/bd/76e8de97a91bdf3bc52b765dcbb17b2e308b01.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzac-trt-kins.so.debug -/usr/lib/debug/.build-id/bd/8600910e8b7a34a538a72903565e2b2091eeed 120777 root:root ../../../../bin/inivar -/usr/lib/debug/.build-id/bd/8600910e8b7a34a538a72903565e2b2091eeed.debug 120777 root:root ../../usr/bin/inivar.debug +/usr/lib/debug/.build-id/bd/087a6896cc3c83a0fd05b72fd9b7dda0a720c0 120777 root:root ../../../linuxcnc/modules/sim_matrix_kb.so +/usr/lib/debug/.build-id/bd/087a6896cc3c83a0fd05b72fd9b7dda0a720c0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_matrix_kb.so.debug +/usr/lib/debug/.build-id/bd/e291bb2463be9f96676b552ca62335ecd68ccb 120777 root:root ../../../linuxcnc/modules/spindle.so +/usr/lib/debug/.build-id/bd/e291bb2463be9f96676b552ca62335ecd68ccb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle.so.debug /usr/lib/debug/.build-id/be 40755 root:root +/usr/lib/debug/.build-id/be/013648c95e6c027c20d1845499ea0c72cb4f97 120777 root:root ../../../linuxcnc/modules/biquad.so +/usr/lib/debug/.build-id/be/013648c95e6c027c20d1845499ea0c72cb4f97.debug 120777 root:root ../../usr/lib/linuxcnc/modules/biquad.so.debug /usr/lib/debug/.build-id/be/0d3cfe37b86c5d635814293ae86dab8a6eb212 120777 root:root ../../../linuxcnc/modules/matrix_kb.so /usr/lib/debug/.build-id/be/0d3cfe37b86c5d635814293ae86dab8a6eb212.debug 120777 root:root ../../usr/lib/linuxcnc/modules/matrix_kb.so.debug -/usr/lib/debug/.build-id/be/8bd0ca885b4e2437cbbb34c65fde2a796d1278 120777 root:root ../../../linuxcnc/modules/xhc_hb04_util.so -/usr/lib/debug/.build-id/be/8bd0ca885b4e2437cbbb34c65fde2a796d1278.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xhc_hb04_util.so.debug /usr/lib/debug/.build-id/bf 40755 root:root @@ -477,92 +447,105 @@ /usr/lib/debug/.build-id/bf/02301e32e772d386c8a4be816bfc3c4e231df2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lineardeltakins.so.debug -/usr/lib/debug/.build-id/bf/245281b16d873da095b848053c62a9422485a2 120777 root:root ../../../linuxcnc/modules/enum.so -/usr/lib/debug/.build-id/bf/245281b16d873da095b848053c62a9422485a2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/enum.so.debug /usr/lib/debug/.build-id/c0 40755 root:root -/usr/lib/debug/.build-id/c0/bb8b60bf87ef0cc95a4db690bd5c83a3c95727 120777 root:root ../../../../bin/halstreamer -/usr/lib/debug/.build-id/c0/bb8b60bf87ef0cc95a4db690bd5c83a3c95727.debug 120777 root:root ../../usr/bin/halstreamer.debug +/usr/lib/debug/.build-id/c0/7b0fc450ada807f5aa6ac7a4d82440ed456523 120777 root:root ../../../../bin/schedrmt +/usr/lib/debug/.build-id/c0/7b0fc450ada807f5aa6ac7a4d82440ed456523.debug 120777 root:root ../../usr/bin/schedrmt.debug /usr/lib/debug/.build-id/c2 40755 root:root -/usr/lib/debug/.build-id/c2/30afc0e7174971f04c98f0ed8a4c9918e173a7 120777 root:root ../../../linuxcnc/modules/hm2_eth.so -/usr/lib/debug/.build-id/c2/30afc0e7174971f04c98f0ed8a4c9918e173a7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_eth.so.debug -/usr/lib/debug/.build-id/c2/9969b305b2b28c1723a122a05bde67febafe71 120777 root:root ../../../linuxcnc/modules/max31855.so -/usr/lib/debug/.build-id/c2/9969b305b2b28c1723a122a05bde67febafe71.debug 120777 root:root ../../usr/lib/linuxcnc/modules/max31855.so.debug -/usr/lib/debug/.build-id/c5 40755 root:root -/usr/lib/debug/.build-id/c5/c9889457c4d1543a53e0bbd4dd1b17ba43db04 120777 root:root ../../../linuxcnc/modules/invert.so -/usr/lib/debug/.build-id/c5/c9889457c4d1543a53e0bbd4dd1b17ba43db04.debug 120777 root:root ../../usr/lib/linuxcnc/modules/invert.so.debug -/usr/lib/debug/.build-id/c8 40755 root:root -/usr/lib/debug/.build-id/c8/07a0472c77034b771661e4f98dc3ae56db32ae 120777 root:root ../../../linuxcnc/modules/hm2_spi.so -/usr/lib/debug/.build-id/c8/07a0472c77034b771661e4f98dc3ae56db32ae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_spi.so.debug +/usr/lib/debug/.build-id/c2/eab404e0d38ef084df2209b2a28fe49d115c97 120777 root:root ../../../../bin/io +/usr/lib/debug/.build-id/c2/eab404e0d38ef084df2209b2a28fe49d115c97.debug 120777 root:root ../../usr/bin/io.debug +/usr/lib/debug/.build-id/c3 40755 root:root +/usr/lib/debug/.build-id/c3/ad0dd13acd5c4024a4f2d1c86c3662073fdb81 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so +/usr/lib/debug/.build-id/c3/ad0dd13acd5c4024a4f2d1c86c3662073fdb81.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug +/usr/lib/debug/.build-id/c6 40755 root:root +/usr/lib/debug/.build-id/c6/5cb7cd56bfe79f0b923987520bed68c535b886 120777 root:root ../../../linuxcnc/modules/modmath.so +/usr/lib/debug/.build-id/c6/5cb7cd56bfe79f0b923987520bed68c535b886.debug 120777 root:root ../../usr/lib/linuxcnc/modules/modmath.so.debug +/usr/lib/debug/.build-id/c6/b0454d9ff89565bc61625cf6056432046b75ad 120777 root:root ../../../linuxcnc/modules/trivkins.so +/usr/lib/debug/.build-id/c6/b0454d9ff89565bc61625cf6056432046b75ad.debug 120777 root:root ../../usr/lib/linuxcnc/modules/trivkins.so.debug /usr/lib/debug/.build-id/c9 40755 root:root -/usr/lib/debug/.build-id/c9/5ae3a4f72c8fe2acba7f6e17249fafbfec3bb1 120777 root:root ../../../linuxcnc/modules/hostmot2.so -/usr/lib/debug/.build-id/c9/5ae3a4f72c8fe2acba7f6e17249fafbfec3bb1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hostmot2.so.debug -/usr/lib/debug/.build-id/c9/6e019cef1a8f3c2180af1151c9ef7481f7646f 120777 root:root ../../../linuxcnc/modules/xor2.so -/usr/lib/debug/.build-id/c9/6e019cef1a8f3c2180af1151c9ef7481f7646f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xor2.so.debug +/usr/lib/debug/.build-id/c9/3ab303c8debdda13f730266cc82881905e0855 120777 root:root ../../../../bin/rs274 +/usr/lib/debug/.build-id/c9/3ab303c8debdda13f730266cc82881905e0855.debug 120777 root:root ../../usr/bin/rs274.debug +/usr/lib/debug/.build-id/c9/75ee596b015f3b7d47ba7401896989da6967fb 120777 root:root ../../../linuxcnc/modules/conv_u32_bit.so +/usr/lib/debug/.build-id/c9/75ee596b015f3b7d47ba7401896989da6967fb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_bit.so.debug +/usr/lib/debug/.build-id/ca 40755 root:root +/usr/lib/debug/.build-id/ca/b79a39238e619928ddc057ce44ca6a9cbc90bd 120777 root:root ../../../linuxcnc/modules/siggen.so +/usr/lib/debug/.build-id/ca/b79a39238e619928ddc057ce44ca6a9cbc90bd.debug 120777 root:root ../../usr/lib/linuxcnc/modules/siggen.so.debug +/usr/lib/debug/.build-id/ca/dc0173d20aaa1b7d839eb7fd876518fca1b3c5 120777 root:root ../../../linuxcnc/modules/carousel.so +/usr/lib/debug/.build-id/ca/dc0173d20aaa1b7d839eb7fd876518fca1b3c5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/carousel.so.debug /usr/lib/debug/.build-id/cc 40755 root:root -/usr/lib/debug/.build-id/cc/67fa7c566d33ed66f44ac2747fa86ce10508fc 120777 root:root ../../../linuxcnc/modules/maj3.so -/usr/lib/debug/.build-id/cc/67fa7c566d33ed66f44ac2747fa86ce10508fc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/maj3.so.debug -/usr/lib/debug/.build-id/cd 40755 root:root -/usr/lib/debug/.build-id/cd/755b20c101ae585a3c5da19fd21b73da969fbf 120777 root:root ../../../../bin/hy_vfd -/usr/lib/debug/.build-id/cd/755b20c101ae585a3c5da19fd21b73da969fbf.debug 120777 root:root ../../usr/bin/hy_vfd.debug -/usr/lib/debug/.build-id/cd/c6876945799518404ff33430ff0f7037acddc2 120777 root:root ../../../python3/site-packages/_togl.so -/usr/lib/debug/.build-id/cd/c6876945799518404ff33430ff0f7037acddc2.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug +/usr/lib/debug/.build-id/cc/5c96fb11e0cc2dae8b2cd83be16efad7c0f6e8 120777 root:root ../../../linuxcnc/modules/hal_speaker.so +/usr/lib/debug/.build-id/cc/5c96fb11e0cc2dae8b2cd83be16efad7c0f6e8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_speaker.so.debug +/usr/lib/debug/.build-id/cc/b218bb5e012d583d7d8fd2e9c46e8a3a12d3be 120777 root:root ../../../linuxcnc/modules/thc.so +/usr/lib/debug/.build-id/cc/b218bb5e012d583d7d8fd2e9c46e8a3a12d3be.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thc.so.debug /usr/lib/debug/.build-id/ce 40755 root:root -/usr/lib/debug/.build-id/ce/431737d2e322415939cb6bfebb0bc9f98ff9f1 120777 root:root ../../../linuxcnc/modules/hal_pi_gpio.so -/usr/lib/debug/.build-id/ce/431737d2e322415939cb6bfebb0bc9f98ff9f1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_pi_gpio.so.debug -/usr/lib/debug/.build-id/ce/6c10cda6a923a720b9639358edcf9beb98ea8c 120777 root:root ../../../linuxcnc/modules/serport.so -/usr/lib/debug/.build-id/ce/6c10cda6a923a720b9639358edcf9beb98ea8c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/serport.so.debug /usr/lib/debug/.build-id/ce/cc40caa69a73050d943f6db6d388e68e03dd72 120777 root:root ../../../linuxcnc/modules/corexykins.so /usr/lib/debug/.build-id/ce/cc40caa69a73050d943f6db6d388e68e03dd72.debug 120777 root:root ../../usr/lib/linuxcnc/modules/corexykins.so.debug -/usr/lib/debug/.build-id/ce/d25ca1aa16fa58b5e69479594c89f1d06131a4 120777 root:root ../../../linuxcnc/modules/gray2bin.so -/usr/lib/debug/.build-id/ce/d25ca1aa16fa58b5e69479594c89f1d06131a4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gray2bin.so.debug +/usr/lib/debug/.build-id/cf 40755 root:root +/usr/lib/debug/.build-id/cf/2450c605f790efe661a4b686081a004937b397 120777 root:root ../../../linuxcnc/modules/scope_rt.so +/usr/lib/debug/.build-id/cf/2450c605f790efe661a4b686081a004937b397.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scope_rt.so.debug +/usr/lib/debug/.build-id/d0 40755 root:root +/usr/lib/debug/.build-id/d0/0e7455e04558a99d192794de3db85eb592039e 120777 root:root ../../../linuxcnc/modules/bitwise.so +/usr/lib/debug/.build-id/d0/0e7455e04558a99d192794de3db85eb592039e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitwise.so.debug +/usr/lib/debug/.build-id/d1 40755 root:root +/usr/lib/debug/.build-id/d1/0ae9cb113e7585209b25ddc3f0b2cb887f1c19 120777 root:root ../../../linuxcnc/modules/hm2_eth.so +/usr/lib/debug/.build-id/d1/0ae9cb113e7585209b25ddc3f0b2cb887f1c19.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_eth.so.debug /usr/lib/debug/.build-id/d2 40755 root:root -/usr/lib/debug/.build-id/d2/49cb3967e109b70d9f8edfea4b6836492f6836 120777 root:root ../../../python3/site-packages/rotarydeltakins.so -/usr/lib/debug/.build-id/d2/49cb3967e109b70d9f8edfea4b6836492f6836.debug 120777 root:root ../../usr/lib/python3/site-packages/rotarydeltakins.so.debug +/usr/lib/debug/.build-id/d2/20b744035ac544cc347e8300f2bf7354d8f942 120777 root:root ../../../linuxcnc/modules/eoffset_per_angle.so +/usr/lib/debug/.build-id/d2/20b744035ac544cc347e8300f2bf7354d8f942.debug 120777 root:root ../../usr/lib/linuxcnc/modules/eoffset_per_angle.so.debug +/usr/lib/debug/.build-id/d2/6f23b7dc46b99271f77596786795b1860a5b95 120777 root:root ../../../linuxcnc/modules/not.so +/usr/lib/debug/.build-id/d2/6f23b7dc46b99271f77596786795b1860a5b95.debug 120777 root:root ../../usr/lib/linuxcnc/modules/not.so.debug /usr/lib/debug/.build-id/d3 40755 root:root -/usr/lib/debug/.build-id/d3/19ecc46ffbb71c5a873770c05993fa23b88b1d 120777 root:root ../../../linuxcnc/modules/flipflop.so -/usr/lib/debug/.build-id/d3/19ecc46ffbb71c5a873770c05993fa23b88b1d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/flipflop.so.debug -/usr/lib/debug/.build-id/d3/48eeb72a0904b0cb61f2ff6c929631f3953801 120777 root:root ../../../linuxcnc/modules/time.so -/usr/lib/debug/.build-id/d3/48eeb72a0904b0cb61f2ff6c929631f3953801.debug 120777 root:root ../../usr/lib/linuxcnc/modules/time.so.debug -/usr/lib/debug/.build-id/d3/d255232bd16deb52357e8ca03e1b7b773a7b58 120777 root:root ../../../linuxcnc/modules/sampler.so -/usr/lib/debug/.build-id/d3/d255232bd16deb52357e8ca03e1b7b773a7b58.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sampler.so.debug -/usr/lib/debug/.build-id/d6 40755 root:root -/usr/lib/debug/.build-id/d6/abb1fe567d81c0c25da4f7be106a24f19e3f31 120777 root:root ../../../linuxcnc/modules/estop_latch.so -/usr/lib/debug/.build-id/d6/abb1fe567d81c0c25da4f7be106a24f19e3f31.debug 120777 root:root ../../usr/lib/linuxcnc/modules/estop_latch.so.debug +/usr/lib/debug/.build-id/d3/2422269644a1378ab6e68738e51e4e4668b366 120777 root:root ../../../linuxcnc/modules/hypot.so +/usr/lib/debug/.build-id/d3/2422269644a1378ab6e68738e51e4e4668b366.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hypot.so.debug +/usr/lib/debug/.build-id/d3/63e32fde54249c2384ddbb4cd931218767d241 120777 root:root ../../../linuxcnc/modules/clarke2.so +/usr/lib/debug/.build-id/d3/63e32fde54249c2384ddbb4cd931218767d241.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke2.so.debug +/usr/lib/debug/.build-id/d4 40755 root:root +/usr/lib/debug/.build-id/d4/2cb0c070f5ecf7f25473b55c4ecbfc9d103aa2 120777 root:root ../../../python3/site-packages/lineardeltakins.so +/usr/lib/debug/.build-id/d4/2cb0c070f5ecf7f25473b55c4ecbfc9d103aa2.debug 120777 root:root ../../usr/lib/python3/site-packages/lineardeltakins.so.debug +/usr/lib/debug/.build-id/d4/82ecb256bb3b8807675d22a603223334f94ccd 120777 root:root ../../../linuxcnc/modules/minmax.so +/usr/lib/debug/.build-id/d4/82ecb256bb3b8807675d22a603223334f94ccd.debug 120777 root:root ../../usr/lib/linuxcnc/modules/minmax.so.debug +/usr/lib/debug/.build-id/d5 40755 root:root +/usr/lib/debug/.build-id/d5/f9ecbfab7304ce335e97cb30b10c7f1867b8a5 120777 root:root ../../../linuxcnc/modules/5axiskins.so +/usr/lib/debug/.build-id/d5/f9ecbfab7304ce335e97cb30b10c7f1867b8a5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/5axiskins.so.debug /usr/lib/debug/.build-id/d7 40755 root:root -/usr/lib/debug/.build-id/d7/6d043e2ced1fa174a7cfc34e75133e8b0e594d 120777 root:root ../../../linuxcnc/modules/lcd.so -/usr/lib/debug/.build-id/d7/6d043e2ced1fa174a7cfc34e75133e8b0e594d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lcd.so.debug -/usr/lib/debug/.build-id/d8 40755 root:root -/usr/lib/debug/.build-id/d8/838c819482f16b251d631c6dfd8ea6205d7a71 120777 root:root ../../../../bin/mb2hal -/usr/lib/debug/.build-id/d8/838c819482f16b251d631c6dfd8ea6205d7a71.debug 120777 root:root ../../usr/bin/mb2hal.debug +/usr/lib/debug/.build-id/d7/6b3f7745b37fb2c5b0ebf46c209d596e5919e6 120777 root:root ../../../linuxcnc/modules/multiclick.so +/usr/lib/debug/.build-id/d7/6b3f7745b37fb2c5b0ebf46c209d596e5919e6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiclick.so.debug +/usr/lib/debug/.build-id/d7/744f4ab8f3e2412febb7a19c93cfca65fedbe5 120777 root:root ../../../linuxcnc/modules/sphereprobe.so +/usr/lib/debug/.build-id/d7/744f4ab8f3e2412febb7a19c93cfca65fedbe5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sphereprobe.so.debug /usr/lib/debug/.build-id/da 40755 root:root -/usr/lib/debug/.build-id/da/49f75e590d0d92c8aab8ec99578a478e3c78af 120777 root:root ../../../linuxcnc/modules/hypot.so -/usr/lib/debug/.build-id/da/49f75e590d0d92c8aab8ec99578a478e3c78af.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hypot.so.debug +/usr/lib/debug/.build-id/da/9de4a83bce8051d9e3ec0d011d61e34aa71ce0 120777 root:root ../../../linuxcnc/modules/gearchange.so +/usr/lib/debug/.build-id/da/9de4a83bce8051d9e3ec0d011d61e34aa71ce0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gearchange.so.debug +/usr/lib/debug/.build-id/db 40755 root:root +/usr/lib/debug/.build-id/db/999680c5e889d6c94c8d568e8b5ff01d4b7fe2 120777 root:root ../../../linuxcnc/modules/conv_float_u32.so +/usr/lib/debug/.build-id/db/999680c5e889d6c94c8d568e8b5ff01d4b7fe2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_u32.so.debug +/usr/lib/debug/.build-id/dc 40755 root:root +/usr/lib/debug/.build-id/dc/276cc995dba40282f396de39df3a62fda7b99c 120777 root:root ../../../linuxcnc/modules/or2.so +/usr/lib/debug/.build-id/dc/276cc995dba40282f396de39df3a62fda7b99c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/or2.so.debug +/usr/lib/debug/.build-id/df 40755 root:root +/usr/lib/debug/.build-id/df/ec494d0668b1261495f89018664170b325e9d6 120777 root:root ../../../python3/site-packages/linuxcnc.so +/usr/lib/debug/.build-id/df/ec494d0668b1261495f89018664170b325e9d6.debug 120777 root:root ../../usr/lib/python3/site-packages/linuxcnc.so.debug /usr/lib/debug/.build-id/e0 40755 root:root -/usr/lib/debug/.build-id/e0/61e1ca72567856c25c3c0970d4fec72564447e 120777 root:root ../../../linuxcnc/modules/genhexkins.so -/usr/lib/debug/.build-id/e0/61e1ca72567856c25c3c0970d4fec72564447e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genhexkins.so.debug -/usr/lib/debug/.build-id/e1 40755 root:root -/usr/lib/debug/.build-id/e1/4337d418b5a11fd232329d06bd5ba11fb5c370 120777 root:root ../../../linuxcnc/modules/bin2gray.so -/usr/lib/debug/.build-id/e1/4337d418b5a11fd232329d06bd5ba11fb5c370.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bin2gray.so.debug -/usr/lib/debug/.build-id/e1/aebc975eda2ee8b70af49d2352149cbb503285 120777 root:root ../../../linuxcnc/modules/hal_speaker.so -/usr/lib/debug/.build-id/e1/aebc975eda2ee8b70af49d2352149cbb503285.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_speaker.so.debug -/usr/lib/debug/.build-id/e2 40755 root:root -/usr/lib/debug/.build-id/e2/1ff24eeeab2c7bee1e09837d0deefa4b5597c3 120777 root:root ../../../linuxcnc/modules/comp.so -/usr/lib/debug/.build-id/e2/1ff24eeeab2c7bee1e09837d0deefa4b5597c3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/comp.so.debug -/usr/lib/debug/.build-id/e4 40755 root:root -/usr/lib/debug/.build-id/e4/e2f697bab9b311bae6fd1131723c170da8d97f 120777 root:root ../../../linuxcnc/modules/limit2.so -/usr/lib/debug/.build-id/e4/e2f697bab9b311bae6fd1131723c170da8d97f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit2.so.debug -/usr/lib/debug/.build-id/e5 40755 root:root -/usr/lib/debug/.build-id/e5/1d45449faba364e5c9d5c7a00c357108292bc8 120777 root:root ../../../linuxcnc/modules/lincurve.so -/usr/lib/debug/.build-id/e5/1d45449faba364e5c9d5c7a00c357108292bc8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lincurve.so.debug -/usr/lib/debug/.build-id/e5/2bfe457e0b313d3df06aae218e6b5ddf60507d 120777 root:root ../../../linuxcnc/modules/trivkins.so -/usr/lib/debug/.build-id/e5/2bfe457e0b313d3df06aae218e6b5ddf60507d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/trivkins.so.debug +/usr/lib/debug/.build-id/e0/2a07ec55a65ea4a5c6f064c77ecc586ce52c2c 120777 root:root ../../../linuxcnc/modules/conv_u32_float.so +/usr/lib/debug/.build-id/e0/2a07ec55a65ea4a5c6f064c77ecc586ce52c2c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_float.so.debug +/usr/lib/debug/.build-id/e0/cb4c8f5ecce108a2e7f98ef7d6a900be953b42 120777 root:root ../../../linuxcnc/modules/conv_bit_u32.so +/usr/lib/debug/.build-id/e0/cb4c8f5ecce108a2e7f98ef7d6a900be953b42.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_u32.so.debug +/usr/lib/debug/.build-id/e6 40755 root:root +/usr/lib/debug/.build-id/e6/6f40f3e14fb103ea51dfa5900675680ee18fd5 120777 root:root ../../../linuxcnc/modules/updown.so +/usr/lib/debug/.build-id/e6/6f40f3e14fb103ea51dfa5900675680ee18fd5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/updown.so.debug +/usr/lib/debug/.build-id/e6/cddfb0747b40b06334c8abe749961cb9b98a41 120777 root:root ../../../../bin/hy_vfd +/usr/lib/debug/.build-id/e6/cddfb0747b40b06334c8abe749961cb9b98a41.debug 120777 root:root ../../usr/bin/hy_vfd.debug +/usr/lib/debug/.build-id/e6/f01ca81733e73e01a935fee5256ea5305555a9 120777 root:root ../../../linuxcnc/modules/scarakins.so +/usr/lib/debug/.build-id/e6/f01ca81733e73e01a935fee5256ea5305555a9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scarakins.so.debug /usr/lib/debug/.build-id/e7 40755 root:root -/usr/lib/debug/.build-id/e7/9830a00df14fafb100e4abddd58d1da3b4aa75 120777 root:root ../../../linuxcnc/modules/thcud.so -/usr/lib/debug/.build-id/e7/9830a00df14fafb100e4abddd58d1da3b4aa75.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thcud.so.debug -/usr/lib/debug/.build-id/e9 40755 root:root -/usr/lib/debug/.build-id/e9/0a514567837002d3287fe13c3b96defe8227ab 120777 root:root ../../../../bin/wj200_vfd -/usr/lib/debug/.build-id/e9/0a514567837002d3287fe13c3b96defe8227ab.debug 120777 root:root ../../usr/bin/wj200_vfd.debug -/usr/lib/debug/.build-id/e9/4e0e9b6eb86a2bd59d7245e2a683839a7b7ce2 120777 root:root ../../../../bin/schedrmt -/usr/lib/debug/.build-id/e9/4e0e9b6eb86a2bd59d7245e2a683839a7b7ce2.debug 120777 root:root ../../usr/bin/schedrmt.debug +/usr/lib/debug/.build-id/e7/33cf23647b642c2bb644b98c2031d8f202cf3c 120777 root:root ../../../linuxcnc/modules/maj3.so +/usr/lib/debug/.build-id/e7/33cf23647b642c2bb644b98c2031d8f202cf3c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/maj3.so.debug +/usr/lib/debug/.build-id/e7/a5b9d84019d624f4e6e239fe5e1c26dc7d30dc 120777 root:root ../../../../bin/halmeter +/usr/lib/debug/.build-id/e7/a5b9d84019d624f4e6e239fe5e1c26dc7d30dc.debug 120777 root:root ../../usr/bin/halmeter.debug +/usr/lib/debug/.build-id/eb 40755 root:root +/usr/lib/debug/.build-id/eb/1753ca3b2b803a8c5cd846a5ce016f84518db4 120777 root:root ../../../linuxcnc/modules/sim_parport.so +/usr/lib/debug/.build-id/eb/1753ca3b2b803a8c5cd846a5ce016f84518db4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_parport.so.debug +/usr/lib/debug/.build-id/eb/8da6c83fc15dcbff2ca719fd46f2f4508fa8c3 120777 root:root ../../../linuxcnc/modules/abs.so +/usr/lib/debug/.build-id/eb/8da6c83fc15dcbff2ca719fd46f2f4508fa8c3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs.so.debug +/usr/lib/debug/.build-id/eb/d012ed6e3587a030cd8e99f55d3ca3effef279 120777 root:root ../../../linuxcnc/modules/abs_s32.so +/usr/lib/debug/.build-id/eb/d012ed6e3587a030cd8e99f55d3ca3effef279.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs_s32.so.debug /usr/lib/debug/.build-id/ec 40755 root:root -/usr/lib/debug/.build-id/ec/4bdee0efcdc489fe2fb47df6e52b13621e60a3 120777 root:root ../../../linuxcnc/modules/xyzab_tdr_kins.so -/usr/lib/debug/.build-id/ec/4bdee0efcdc489fe2fb47df6e52b13621e60a3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzab_tdr_kins.so.debug +/usr/lib/debug/.build-id/ec/b47eabd561571de3d759fd4476d68ca6ad9ff9 120777 root:root ../../../linuxcnc/modules/constant.so +/usr/lib/debug/.build-id/ec/b47eabd561571de3d759fd4476d68ca6ad9ff9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/constant.so.debug /usr/lib/debug/.build-id/ec/babffffd4c12d13ce62679b92c547d8ca9d08e 120777 root:root ../../../linuxcnc/modules/stepgen.so @@ -570,13 +553,14 @@ /usr/lib/debug/.build-id/ee 40755 root:root -/usr/lib/debug/.build-id/ee/10c738d5098611ced3b3ad956a1ba985998eda 120777 root:root ../../../linuxcnc/modules/boss_plc.so -/usr/lib/debug/.build-id/ee/10c738d5098611ced3b3ad956a1ba985998eda.debug 120777 root:root ../../usr/lib/linuxcnc/modules/boss_plc.so.debug +/usr/lib/debug/.build-id/ee/c9e747f93031124a9b3f8465d8857d3a59fcb6 120777 root:root ../../../tcl/linuxcnc/hal.so +/usr/lib/debug/.build-id/ee/c9e747f93031124a9b3f8465d8857d3a59fcb6.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/hal.so.debug /usr/lib/debug/.build-id/ef 40755 root:root -/usr/lib/debug/.build-id/ef/cb6ab68906c113618ea9cfcee7fb376b7e9416 120777 root:root ../../../../bin/sendkeys -/usr/lib/debug/.build-id/ef/cb6ab68906c113618ea9cfcee7fb376b7e9416.debug 120777 root:root ../../usr/bin/sendkeys.debug -/usr/lib/debug/.build-id/f0 40755 root:root -/usr/lib/debug/.build-id/f0/afb4d920ac9da2617c23032acab5b1d40a1847 120777 root:root ../../../../bin/halrmt -/usr/lib/debug/.build-id/f0/afb4d920ac9da2617c23032acab5b1d40a1847.debug 120777 root:root ../../usr/bin/halrmt.debug +/usr/lib/debug/.build-id/ef/7d275285d2130ed26ff44c9e9fd15b27e57672 120777 root:root ../../../linuxcnc/modules/xyzab_tdr_kins.so +/usr/lib/debug/.build-id/ef/7d275285d2130ed26ff44c9e9fd15b27e57672.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzab_tdr_kins.so.debug +/usr/lib/debug/.build-id/ef/9b7b4326dbc320fe192b73d4703d7e943ff031 120777 root:root ../../../linuxcnc/modules/flipflop.so +/usr/lib/debug/.build-id/ef/9b7b4326dbc320fe192b73d4703d7e943ff031.debug 120777 root:root ../../usr/lib/linuxcnc/modules/flipflop.so.debug /usr/lib/debug/.build-id/f1 40755 root:root -/usr/lib/debug/.build-id/f1/be6c83f39ff2c77422429660fbc6441c683191 120777 root:root ../../../linuxcnc/modules/scale.so -/usr/lib/debug/.build-id/f1/be6c83f39ff2c77422429660fbc6441c683191.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scale.so.debug +/usr/lib/debug/.build-id/f1/165e3da12ba11c7d6eebc8ce94a3a008d56bd9 120777 root:root ../../../linuxcnc/modules/weighted_sum.so +/usr/lib/debug/.build-id/f1/165e3da12ba11c7d6eebc8ce94a3a008d56bd9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/weighted_sum.so.debug +/usr/lib/debug/.build-id/f1/3bcefc0aa8d9e26f9e4ea4ba30c6dd58cd315a 120777 root:root ../../../linuxcnc/modules/supply.so +/usr/lib/debug/.build-id/f1/3bcefc0aa8d9e26f9e4ea4ba30c6dd58cd315a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/supply.so.debug /usr/lib/debug/.build-id/f2 40755 root:root @@ -584,8 +568,15 @@ /usr/lib/debug/.build-id/f2/00ce4a53002af131f473f88f949736756ef887.debug 120777 root:root ../../usr/lib/linuxcnc/modules/watchdog.so.debug +/usr/lib/debug/.build-id/f2/207a5ecf14fad837ab75f48a01586b0ae679a6 120777 root:root ../../../linuxcnc/modules/threadtest.so +/usr/lib/debug/.build-id/f2/207a5ecf14fad837ab75f48a01586b0ae679a6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/threadtest.so.debug +/usr/lib/debug/.build-id/f2/83d0ad7a0a970d0538f9853df3596b2fbf23a6 120777 root:root ../../../linuxcnc/modules/simple_tp.so +/usr/lib/debug/.build-id/f2/83d0ad7a0a970d0538f9853df3596b2fbf23a6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/simple_tp.so.debug /usr/lib/debug/.build-id/f2/e2d2d57608f1868dd4d5052ebe6a1c09d3128a 120777 root:root ../../../linuxcnc/modules/rotatekins.so /usr/lib/debug/.build-id/f2/e2d2d57608f1868dd4d5052ebe6a1c09d3128a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotatekins.so.debug -/usr/lib/debug/.build-id/f3 40755 root:root -/usr/lib/debug/.build-id/f3/ac7b3ebf29a879e503aec749f217574b045004 120777 root:root ../../../linuxcnc/modules/clarkeinv.so -/usr/lib/debug/.build-id/f3/ac7b3ebf29a879e503aec749f217574b045004.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarkeinv.so.debug /usr/lib/debug/.build-id/f4 40755 root:root +/usr/lib/debug/.build-id/f4/21a955bd96ba94f2c8919b0658f3c4b505cf06 120777 root:root ../../../linuxcnc/modules/tof.so +/usr/lib/debug/.build-id/f4/21a955bd96ba94f2c8919b0658f3c4b505cf06.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tof.so.debug +/usr/lib/debug/.build-id/f4/2b7cd34b0f5c019746f294171e0173dfa85109 120777 root:root ../../../linuxcnc/modules/mesa_uart.so +/usr/lib/debug/.build-id/f4/2b7cd34b0f5c019746f294171e0173dfa85109.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_uart.so.debug +/usr/lib/debug/.build-id/f4/3403b99d914a48a12613d77b8b63df86cb7675 120777 root:root ../../../linuxcnc/modules/hal_ppmc.so +/usr/lib/debug/.build-id/f4/3403b99d914a48a12613d77b8b63df86cb7675.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_ppmc.so.debug /usr/lib/debug/.build-id/f4/ac9330017e743e9c3f4c253d90a1c3733b2c8b 120777 root:root ../../../linuxcnc/modules/scorbot-kins.so @@ -593,21 +584,23 @@ /usr/lib/debug/.build-id/f5 40755 root:root -/usr/lib/debug/.build-id/f5/ee168a70a399704eb989e7a4ccdc2c0973ccfb 120777 root:root ../../../linuxcnc/canterp.so -/usr/lib/debug/.build-id/f5/ee168a70a399704eb989e7a4ccdc2c0973ccfb.debug 120777 root:root ../../usr/lib/linuxcnc/canterp.so.debug -/usr/lib/debug/.build-id/f6 40755 root:root -/usr/lib/debug/.build-id/f6/41ea89d6bdd966e914fdb0c43ae7b9afc44b55 120777 root:root ../../../linuxcnc/modules/millturn.so -/usr/lib/debug/.build-id/f6/41ea89d6bdd966e914fdb0c43ae7b9afc44b55.debug 120777 root:root ../../usr/lib/linuxcnc/modules/millturn.so.debug +/usr/lib/debug/.build-id/f5/56c03fee720e87034f9431a6e933c032d42e09 120777 root:root ../../../linuxcnc/modules/lowpass.so +/usr/lib/debug/.build-id/f5/56c03fee720e87034f9431a6e933c032d42e09.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lowpass.so.debug +/usr/lib/debug/.build-id/f5/c4e7b82fbcc6a25e03b5fd56a70ca4bb630748 120777 root:root ../../../../bin/linuxcnc_module_helper +/usr/lib/debug/.build-id/f5/c4e7b82fbcc6a25e03b5fd56a70ca4bb630748.debug 120777 root:root ../../usr/bin/linuxcnc_module_helper.debug +/usr/lib/debug/.build-id/f7 40755 root:root +/usr/lib/debug/.build-id/f7/4e998af1917a20f13e4a03eceea20cf70e24fc 120777 root:root ../../../linuxcnc/modules/debounce.so +/usr/lib/debug/.build-id/f7/4e998af1917a20f13e4a03eceea20cf70e24fc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/debounce.so.debug +/usr/lib/debug/.build-id/f9 40755 root:root +/usr/lib/debug/.build-id/f9/021ca166e7ad031ee4362aa9c496b80ec9b909 120777 root:root ../../../linuxcnc/modules/bitslice.so +/usr/lib/debug/.build-id/f9/021ca166e7ad031ee4362aa9c496b80ec9b909.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitslice.so.debug +/usr/lib/debug/.build-id/f9/798aabab75f9e96a3980acac4b423cd112b3e5 120777 root:root ../../../linuxcnc/modules/message.so +/usr/lib/debug/.build-id/f9/798aabab75f9e96a3980acac4b423cd112b3e5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/message.so.debug /usr/lib/debug/.build-id/fa 40755 root:root -/usr/lib/debug/.build-id/fa/835c1410c5339b9061a10820a88c1a642c2086 120777 root:root ../../../linuxcnc/modules/mesa_pktgyro_test.so -/usr/lib/debug/.build-id/fa/835c1410c5339b9061a10820a88c1a642c2086.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_pktgyro_test.so.debug +/usr/lib/debug/.build-id/fa/abfa4aa6ff053d2b021992a41afd628aca9073 120777 root:root ../../../linuxcnc/modules/and2.so +/usr/lib/debug/.build-id/fa/abfa4aa6ff053d2b021992a41afd628aca9073.debug 120777 root:root ../../usr/lib/linuxcnc/modules/and2.so.debug /usr/lib/debug/.build-id/fb 40755 root:root -/usr/lib/debug/.build-id/fb/aa085666bc9f2b0263b527ed714b645570210c 120777 root:root ../../../linuxcnc/modules/logic.so -/usr/lib/debug/.build-id/fb/aa085666bc9f2b0263b527ed714b645570210c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/logic.so.debug -/usr/lib/debug/.build-id/fb/bce530269895d032c9e7f9d08681817b95112b 120777 root:root ../../../../bin/milltask -/usr/lib/debug/.build-id/fb/bce530269895d032c9e7f9d08681817b95112b.debug 120777 root:root ../../usr/bin/milltask.debug -/usr/lib/debug/.build-id/fc 40755 root:root -/usr/lib/debug/.build-id/fc/e2a82a1a1c34b5c738049d8cec426954852082 120777 root:root ../../../linuxcnc/modules/updown.so -/usr/lib/debug/.build-id/fc/e2a82a1a1c34b5c738049d8cec426954852082.debug 120777 root:root ../../usr/lib/linuxcnc/modules/updown.so.debug +/usr/lib/debug/.build-id/fb/50acf86f88cda9c9994b31bf99d99a22e8215b 120777 root:root ../../../linuxcnc/modules/blend.so +/usr/lib/debug/.build-id/fb/50acf86f88cda9c9994b31bf99d99a22e8215b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/blend.so.debug +/usr/lib/debug/.build-id/fb/c559115a4a8f875ef61b54d26db1226bac0047 120777 root:root ../../../linuxcnc/modules/scaled_s32_sums.so +/usr/lib/debug/.build-id/fb/c559115a4a8f875ef61b54d26db1226bac0047.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scaled_s32_sums.so.debug /usr/lib/debug/.build-id/ff 40755 root:root -/usr/lib/debug/.build-id/ff/4fb6d3000a6d72220e0d683083881391732e07 120777 root:root ../../../../bin/genserkins -/usr/lib/debug/.build-id/ff/4fb6d3000a6d72220e0d683083881391732e07.debug 120777 root:root ../../usr/bin/genserkins.debug /usr/lib/debug/.build-id/ff/51514eabd5b03df863be04c6ed9ba118c074fb 120777 root:root ../../../linuxcnc/modules/maxkins.so @@ -1528,81 +1521,79 @@ Provides: linuxcnc-debuginfo = 2.9.2-alt4.20240203:sisyphus+345892.200.2.1 -File: /usr/lib/debug/.build-id/01 40755 root:root -File: /usr/lib/debug/.build-id/01/24c07b454b8f747e74de546306280a89f38de9 120777 root:root ../../../linuxcnc/modules/abs.so -File: /usr/lib/debug/.build-id/01/24c07b454b8f747e74de546306280a89f38de9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs.so.debug File: /usr/lib/debug/.build-id/02 40755 root:root -File: /usr/lib/debug/.build-id/02/201e8930722adbe86d2fead2ce95798a591ae8 120777 root:root ../../../linuxcnc/modules/anglejog.so -File: /usr/lib/debug/.build-id/02/201e8930722adbe86d2fead2ce95798a591ae8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/anglejog.so.debug -File: /usr/lib/debug/.build-id/02/350c6ff7522264003bc9e4c8cf3d4db9724826 120777 root:root ../../../linuxcnc/modules/thc.so -File: /usr/lib/debug/.build-id/02/350c6ff7522264003bc9e4c8cf3d4db9724826.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thc.so.debug +File: /usr/lib/debug/.build-id/02/3bb962b4c9d73a2c09acda0f77f8110b0bf87c 120777 root:root ../../../../bin/milltask +File: /usr/lib/debug/.build-id/02/3bb962b4c9d73a2c09acda0f77f8110b0bf87c.debug 120777 root:root ../../usr/bin/milltask.debug +File: /usr/lib/debug/.build-id/05 40755 root:root +File: /usr/lib/debug/.build-id/05/38d7f474266b2bc9334b270113acab45843c96 120777 root:root ../../../linuxcnc/modules/near.so +File: /usr/lib/debug/.build-id/05/38d7f474266b2bc9334b270113acab45843c96.debug 120777 root:root ../../usr/lib/linuxcnc/modules/near.so.debug +File: /usr/lib/debug/.build-id/05/b3be53b6e11cb208b92fb40bcf34d63b107521 120777 root:root ../../../linuxcnc/modules/timedelay.so +File: /usr/lib/debug/.build-id/05/b3be53b6e11cb208b92fb40bcf34d63b107521.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelay.so.debug File: /usr/lib/debug/.build-id/06 40755 root:root -File: /usr/lib/debug/.build-id/06/60962c955c69faea26b008906ed07fe7b59395 120777 root:root ../../../linuxcnc/modules/demux.so -File: /usr/lib/debug/.build-id/06/60962c955c69faea26b008906ed07fe7b59395.debug 120777 root:root ../../usr/lib/linuxcnc/modules/demux.so.debug -File: /usr/lib/debug/.build-id/07 40755 root:root -File: /usr/lib/debug/.build-id/07/6fd86c339319d3dd6f4d504ffc1b5f3f51f56b 120777 root:root ../../../linuxcnc/modules/genserkins.so -File: /usr/lib/debug/.build-id/07/6fd86c339319d3dd6f4d504ffc1b5f3f51f56b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genserkins.so.debug +File: /usr/lib/debug/.build-id/06/b1ef5aab106198137c6110398334ba1d8245b7 120777 root:root ../../../linuxcnc/modules/limit2.so +File: /usr/lib/debug/.build-id/06/b1ef5aab106198137c6110398334ba1d8245b7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit2.so.debug +File: /usr/lib/debug/.build-id/06/fd37bdaecf7f5d1270c01a02bc4efd432d1e67 120777 root:root ../../../linuxcnc/canterp.so +File: /usr/lib/debug/.build-id/06/fd37bdaecf7f5d1270c01a02bc4efd432d1e67.debug 120777 root:root ../../usr/lib/linuxcnc/canterp.so.debug File: /usr/lib/debug/.build-id/08 40755 root:root -File: /usr/lib/debug/.build-id/08/8dc3db1f0801ee15b9f33e38deed36cf39e6d4 120777 root:root ../../../linuxcnc/modules/carousel.so -File: /usr/lib/debug/.build-id/08/8dc3db1f0801ee15b9f33e38deed36cf39e6d4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/carousel.so.debug -File: /usr/lib/debug/.build-id/09 40755 root:root -File: /usr/lib/debug/.build-id/09/4bed84783af40738d9d4f17a86eef4ced80984 120777 root:root ../../../linuxcnc/modules/toggle.so -File: /usr/lib/debug/.build-id/09/4bed84783af40738d9d4f17a86eef4ced80984.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle.so.debug -File: /usr/lib/debug/.build-id/09/b34a2222f4a4e5c4c0b48b247e74bfb26f360f 120777 root:root ../../../linuxcnc/modules/hm2_test.so -File: /usr/lib/debug/.build-id/09/b34a2222f4a4e5c4c0b48b247e74bfb26f360f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_test.so.debug -File: /usr/lib/debug/.build-id/09/f69019d11715af38e6e2a45084e71c08f500be 120777 root:root ../../../linuxcnc/modules/limit_axis.so -File: /usr/lib/debug/.build-id/09/f69019d11715af38e6e2a45084e71c08f500be.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit_axis.so.debug +File: /usr/lib/debug/.build-id/08/847aa32d79c6debcce33872bd356022aee951a 120777 root:root ../../../linuxcnc/modules/hostmot2.so +File: /usr/lib/debug/.build-id/08/847aa32d79c6debcce33872bd356022aee951a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hostmot2.so.debug File: /usr/lib/debug/.build-id/0a 40755 root:root -File: /usr/lib/debug/.build-id/0a/74b67d4e4b0b008b07139d41f6a53c01f65703 120777 root:root ../../../linuxcnc/modules/tof.so -File: /usr/lib/debug/.build-id/0a/74b67d4e4b0b008b07139d41f6a53c01f65703.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tof.so.debug -File: /usr/lib/debug/.build-id/0b 40755 root:root -File: /usr/lib/debug/.build-id/0b/d3393dd2dd1f829a6eaafa1a37cac77df8c786 120777 root:root ../../../linuxcnc/modules/charge_pump.so -File: /usr/lib/debug/.build-id/0b/d3393dd2dd1f829a6eaafa1a37cac77df8c786.debug 120777 root:root ../../usr/lib/linuxcnc/modules/charge_pump.so.debug +File: /usr/lib/debug/.build-id/0a/1262a0f3a9e867ea6db4f2170d4df7ee769f34 120777 root:root ../../../linuxcnc/modules/mux16.so +File: /usr/lib/debug/.build-id/0a/1262a0f3a9e867ea6db4f2170d4df7ee769f34.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux16.so.debug File: /usr/lib/debug/.build-id/0c 40755 root:root -File: /usr/lib/debug/.build-id/0c/57453e89cc189be920308d3e9254d444704a03 120777 root:root ../../../linuxcnc/modules/classicladder_rt.so -File: /usr/lib/debug/.build-id/0c/57453e89cc189be920308d3e9254d444704a03.debug 120777 root:root ../../usr/lib/linuxcnc/modules/classicladder_rt.so.debug +File: /usr/lib/debug/.build-id/0c/5f43d2578414e06d106e195ad2e8ed72389e35 120777 root:root ../../../linuxcnc/modules/time.so +File: /usr/lib/debug/.build-id/0c/5f43d2578414e06d106e195ad2e8ed72389e35.debug 120777 root:root ../../usr/lib/linuxcnc/modules/time.so.debug +File: /usr/lib/debug/.build-id/0c/bf8c13903874239de673ead837abb266ada3a8 120777 root:root ../../../linuxcnc/modules/moveoff.so +File: /usr/lib/debug/.build-id/0c/bf8c13903874239de673ead837abb266ada3a8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/moveoff.so.debug File: /usr/lib/debug/.build-id/0d 40755 root:root -File: /usr/lib/debug/.build-id/0d/4e055f8ec09517f96d0e85fd952cdd36c73a3b 120777 root:root ../../../../bin/halcmd -File: /usr/lib/debug/.build-id/0d/4e055f8ec09517f96d0e85fd952cdd36c73a3b.debug 120777 root:root ../../usr/bin/halcmd.debug -File: /usr/lib/debug/.build-id/0d/ebc03e8d63a9da582d278b6578c0a64317f3af 120777 root:root ../../../../bin/iov2 -File: /usr/lib/debug/.build-id/0d/ebc03e8d63a9da582d278b6578c0a64317f3af.debug 120777 root:root ../../usr/bin/iov2.debug +File: /usr/lib/debug/.build-id/0d/e41b547978f27ecd96b6c65ea7be35f84d3d8d 120777 root:root ../../../linuxcnc/modules/mux_generic.so +File: /usr/lib/debug/.build-id/0d/e41b547978f27ecd96b6c65ea7be35f84d3d8d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux_generic.so.debug File: /usr/lib/debug/.build-id/0f 40755 root:root -File: /usr/lib/debug/.build-id/0f/85e871883fb9a2be223394c9d88d2520e814cc 120777 root:root ../../../linuxcnc/modules/gantry.so -File: /usr/lib/debug/.build-id/0f/85e871883fb9a2be223394c9d88d2520e814cc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gantry.so.debug -File: /usr/lib/debug/.build-id/0f/fbe0f3adb3fe3b81dcccf74d36640b0ea70f94 120777 root:root ../../../linuxcnc/modules/moveoff.so -File: /usr/lib/debug/.build-id/0f/fbe0f3adb3fe3b81dcccf74d36640b0ea70f94.debug 120777 root:root ../../usr/lib/linuxcnc/modules/moveoff.so.debug -File: /usr/lib/debug/.build-id/11 40755 root:root -File: /usr/lib/debug/.build-id/11/95f6b504c41e6b4233843a1b6a557595479c0f 120777 root:root ../../../linuxcnc/modules/conv_s32_float.so -File: /usr/lib/debug/.build-id/11/95f6b504c41e6b4233843a1b6a557595479c0f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_float.so.debug -File: /usr/lib/debug/.build-id/12 40755 root:root -File: /usr/lib/debug/.build-id/12/5f0b65fb7adaeefc2ed66eeb554f3a7083b7f0 120777 root:root ../../../../bin/halmeter -File: /usr/lib/debug/.build-id/12/5f0b65fb7adaeefc2ed66eeb554f3a7083b7f0.debug 120777 root:root ../../usr/bin/halmeter.debug +File: /usr/lib/debug/.build-id/0f/9eb5dd7a356f72e7e9664751c73313d2666e52 120777 root:root ../../../linuxcnc/modules/sim_spindle.so +File: /usr/lib/debug/.build-id/0f/9eb5dd7a356f72e7e9664751c73313d2666e52.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_spindle.so.debug +File: /usr/lib/debug/.build-id/10 40755 root:root +File: /usr/lib/debug/.build-id/10/198c7081821c546d7a217a1aca9222a1e98c0b 120777 root:root ../../../linuxcnc/modules/lut5.so +File: /usr/lib/debug/.build-id/10/198c7081821c546d7a217a1aca9222a1e98c0b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lut5.so.debug +File: /usr/lib/debug/.build-id/13 40755 root:root +File: /usr/lib/debug/.build-id/13/835ed1c9115ee4027bb31677f44fad0959d8db 120777 root:root ../../../linuxcnc/modules/conv_s32_float.so +File: /usr/lib/debug/.build-id/13/835ed1c9115ee4027bb31677f44fad0959d8db.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_float.so.debug +File: /usr/lib/debug/.build-id/14 40755 root:root +File: /usr/lib/debug/.build-id/14/b3300516834077e4b4b9adc5ab813d25c70d6a 120777 root:root ../../../../bin/vfs11_vfd +File: /usr/lib/debug/.build-id/14/b3300516834077e4b4b9adc5ab813d25c70d6a.debug 120777 root:root ../../usr/bin/vfs11_vfd.debug File: /usr/lib/debug/.build-id/15 40755 root:root -File: /usr/lib/debug/.build-id/15/12e9ed45ddfbea3a96943ab39653348f3a8ad4 120777 root:root ../../../linuxcnc/modules/corexy_by_hal.so -File: /usr/lib/debug/.build-id/15/12e9ed45ddfbea3a96943ab39653348f3a8ad4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/corexy_by_hal.so.debug -File: /usr/lib/debug/.build-id/15/790a19b897465d946e5b36634930c17e6fa70a 120777 root:root ../../../../bin/svd-ps_vfd -File: /usr/lib/debug/.build-id/15/790a19b897465d946e5b36634930c17e6fa70a.debug 120777 root:root ../../usr/bin/svd-ps_vfd.debug +File: /usr/lib/debug/.build-id/15/1f7d767654200a2e8f645e6b27fba0ee4e550e 120777 root:root ../../../linuxcnc/modules/differential.so +File: /usr/lib/debug/.build-id/15/1f7d767654200a2e8f645e6b27fba0ee4e550e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/differential.so.debug +File: /usr/lib/debug/.build-id/15/e30a76759a302ff67659139b518d806274be85 120777 root:root ../../../linuxcnc/modules/oneshot.so +File: /usr/lib/debug/.build-id/15/e30a76759a302ff67659139b518d806274be85.debug 120777 root:root ../../usr/lib/linuxcnc/modules/oneshot.so.debug File: /usr/lib/debug/.build-id/16 40755 root:root -File: /usr/lib/debug/.build-id/16/5c16553869780b2bad51cdf5698c00ddbdcc5c 120777 root:root ../../../python3/site-packages/gcode.so -File: /usr/lib/debug/.build-id/16/5c16553869780b2bad51cdf5698c00ddbdcc5c.debug 120777 root:root ../../usr/lib/python3/site-packages/gcode.so.debug +File: /usr/lib/debug/.build-id/16/ef9d40157aee720766e86ff56c7364845adcb0 120777 root:root ../../../linuxcnc/modules/genserkins.so +File: /usr/lib/debug/.build-id/16/ef9d40157aee720766e86ff56c7364845adcb0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genserkins.so.debug File: /usr/lib/debug/.build-id/17 40755 root:root -File: /usr/lib/debug/.build-id/17/eca031e71314a08f2a7402a337788e382071b0 120777 root:root ../../../linuxcnc/modules/sim_home_switch.so -File: /usr/lib/debug/.build-id/17/eca031e71314a08f2a7402a337788e382071b0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_home_switch.so.debug +File: /usr/lib/debug/.build-id/17/224394a5a1d9d26e57217577d78c6be68febc2 120777 root:root ../../../linuxcnc/modules/boss_plc.so +File: /usr/lib/debug/.build-id/17/224394a5a1d9d26e57217577d78c6be68febc2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/boss_plc.so.debug +File: /usr/lib/debug/.build-id/18 40755 root:root +File: /usr/lib/debug/.build-id/18/4e7359290d76e7d8e34d0c5ad218b76c0c3445 120777 root:root ../../../../bin/motion-logger +File: /usr/lib/debug/.build-id/18/4e7359290d76e7d8e34d0c5ad218b76c0c3445.debug 120777 root:root ../../usr/bin/motion-logger.debug +File: /usr/lib/debug/.build-id/18/6710573ddb0cc82e3d1f2d39c2eef600c43584 120777 root:root ../../../../bin/halrmt +File: /usr/lib/debug/.build-id/18/6710573ddb0cc82e3d1f2d39c2eef600c43584.debug 120777 root:root ../../usr/bin/halrmt.debug File: /usr/lib/debug/.build-id/19 40755 root:root -File: /usr/lib/debug/.build-id/19/1363eba1213db464fe0b9e3be95699b7172727 120777 root:root ../../../linuxcnc/modules/deadzone.so -File: /usr/lib/debug/.build-id/19/1363eba1213db464fe0b9e3be95699b7172727.debug 120777 root:root ../../usr/lib/linuxcnc/modules/deadzone.so.debug -File: /usr/lib/debug/.build-id/19/6ed04918d5ea8b2c37588cb5e02a713175ad3c 120777 root:root ../../../linuxcnc/modules/conv_s32_u32.so -File: /usr/lib/debug/.build-id/19/6ed04918d5ea8b2c37588cb5e02a713175ad3c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_u32.so.debug -File: /usr/lib/debug/.build-id/1a 40755 root:root -File: /usr/lib/debug/.build-id/1a/785a31b9b8a04549d91ad778161c628b201437 120777 root:root ../../../../bin/classicladder -File: /usr/lib/debug/.build-id/1a/785a31b9b8a04549d91ad778161c628b201437.debug 120777 root:root ../../usr/bin/classicladder.debug -File: /usr/lib/debug/.build-id/1a/cf5141aee5832c398ca5626ad461b598056ebc 120777 root:root ../../../linuxcnc/modules/ton.so -File: /usr/lib/debug/.build-id/1a/cf5141aee5832c398ca5626ad461b598056ebc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ton.so.debug +File: /usr/lib/debug/.build-id/19/900dcc9bba4c23b8ed41b7790495870858daae 120777 root:root ../../../linuxcnc/modules/clarke3.so +File: /usr/lib/debug/.build-id/19/900dcc9bba4c23b8ed41b7790495870858daae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke3.so.debug +File: /usr/lib/debug/.build-id/1b 40755 root:root +File: /usr/lib/debug/.build-id/1b/3c6d234f1d359e2a58845cabea491d2e594a0d 120777 root:root ../../../linuxcnc/modules/joyhandle.so +File: /usr/lib/debug/.build-id/1b/3c6d234f1d359e2a58845cabea491d2e594a0d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/joyhandle.so.debug File: /usr/lib/debug/.build-id/1c 40755 root:root -File: /usr/lib/debug/.build-id/1c/3464b71c26d782116d8ee5cfd78415ba973035 120777 root:root ../../../linuxcnc/modules/multiclick.so -File: /usr/lib/debug/.build-id/1c/3464b71c26d782116d8ee5cfd78415ba973035.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiclick.so.debug -File: /usr/lib/debug/.build-id/20 40755 root:root -File: /usr/lib/debug/.build-id/20/b90d5e7cbd00df28cf17c50efe6eb1ba4a6d62 120777 root:root ../../../../bin/rs274 -File: /usr/lib/debug/.build-id/20/b90d5e7cbd00df28cf17c50efe6eb1ba4a6d62.debug 120777 root:root ../../usr/bin/rs274.debug +File: /usr/lib/debug/.build-id/1c/0d40a409c0f4451d2d80b382f9aef2a0c73599 120777 root:root ../../../../bin/thermistor +File: /usr/lib/debug/.build-id/1c/0d40a409c0f4451d2d80b382f9aef2a0c73599.debug 120777 root:root ../../usr/bin/thermistor.debug +File: /usr/lib/debug/.build-id/1c/2006877136bf02d584c9b7c17e50c8b3415a34 120777 root:root ../../../linuxcnc/modules/wcomp.so +File: /usr/lib/debug/.build-id/1c/2006877136bf02d584c9b7c17e50c8b3415a34.debug 120777 root:root ../../usr/lib/linuxcnc/modules/wcomp.so.debug +File: /usr/lib/debug/.build-id/21 40755 root:root +File: /usr/lib/debug/.build-id/21/1d4332fe0099be913d6f6ff44e1ef3dab10c43 120777 root:root ../../../linuxcnc/modules/knob2float.so +File: /usr/lib/debug/.build-id/21/1d4332fe0099be913d6f6ff44e1ef3dab10c43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/knob2float.so.debug +File: /usr/lib/debug/.build-id/21/5d4750442282f6e398264bbaa63be5e598ff7c 120777 root:root ../../../linuxcnc/modules/orient.so +File: /usr/lib/debug/.build-id/21/5d4750442282f6e398264bbaa63be5e598ff7c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/orient.so.debug File: /usr/lib/debug/.build-id/22 40755 root:root -File: /usr/lib/debug/.build-id/22/fb31b4685574f72285ca4f9d903dbe0582dd8d 120777 root:root ../../../../bin/pi500_vfd -File: /usr/lib/debug/.build-id/22/fb31b4685574f72285ca4f9d903dbe0582dd8d.debug 120777 root:root ../../usr/bin/pi500_vfd.debug +File: /usr/lib/debug/.build-id/22/9f93de3eaf78d98a3b28b150a6d1b800b2b01d 120777 root:root ../../../linuxcnc/modules/sum2.so +File: /usr/lib/debug/.build-id/22/9f93de3eaf78d98a3b28b150a6d1b800b2b01d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sum2.so.debug +File: /usr/lib/debug/.build-id/23 40755 root:root +File: /usr/lib/debug/.build-id/23/d3b169406d56292b431f709c9ab0dc6ed57c40 120777 root:root ../../../../bin/iov2 +File: /usr/lib/debug/.build-id/23/d3b169406d56292b431f709c9ab0dc6ed57c40.debug 120777 root:root ../../usr/bin/iov2.debug File: /usr/lib/debug/.build-id/24 40755 root:root @@ -1610,9 +1601,5 @@ File: /usr/lib/debug/.build-id/24/acfb369dd516ad869671a227e906fb29362c0c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rosekins.so.debug -File: /usr/lib/debug/.build-id/25 40755 root:root -File: /usr/lib/debug/.build-id/25/18a4a8c035f946e29ceca9ed7d51b758083fe6 120777 root:root ../../../../bin/rtapi_app -File: /usr/lib/debug/.build-id/25/18a4a8c035f946e29ceca9ed7d51b758083fe6.debug 120777 root:root ../../usr/bin/rtapi_app.debug -File: /usr/lib/debug/.build-id/25/3e1ecbbdc0b50442bda5df3ee59fe2fae038eb 120777 root:root ../../../linuxcnc/modules/siggen.so -File: /usr/lib/debug/.build-id/25/3e1ecbbdc0b50442bda5df3ee59fe2fae038eb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/siggen.so.debug -File: /usr/lib/debug/.build-id/25/e376a896ac8710dd42d9b409bf988f4efe81d2 120777 root:root ../../../linuxcnc/modules/tpmod.so -File: /usr/lib/debug/.build-id/25/e376a896ac8710dd42d9b409bf988f4efe81d2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tpmod.so.debug +File: /usr/lib/debug/.build-id/26 40755 root:root +File: /usr/lib/debug/.build-id/26/376870e964c2b2b5937bac64492781f5cf5104 120777 root:root ../../../linuxcnc/modules/mux2.so +File: /usr/lib/debug/.build-id/26/376870e964c2b2b5937bac64492781f5cf5104.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux2.so.debug File: /usr/lib/debug/.build-id/28 40755 root:root @@ -1620,61 +1607,58 @@ File: /usr/lib/debug/.build-id/28/23123494eb9dec8f4094dda1d3277262d3362c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/homecomp.so.debug +File: /usr/lib/debug/.build-id/28/83f1bab48a6de62771c045720f7c682a7a2acb 120777 root:root ../../../linuxcnc/modules/hm2_test.so +File: /usr/lib/debug/.build-id/28/83f1bab48a6de62771c045720f7c682a7a2acb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_test.so.debug +File: /usr/lib/debug/.build-id/28/8abc8b74ed1248820632204eaecb4464dad067 120777 root:root ../../../linuxcnc/modules/bin2gray.so +File: /usr/lib/debug/.build-id/28/8abc8b74ed1248820632204eaecb4464dad067.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bin2gray.so.debug +File: /usr/lib/debug/.build-id/28/bb101859ec335beb6c491f5ccdc432d5845c59 120777 root:root ../../../linuxcnc/modules/hm2_spi.so +File: /usr/lib/debug/.build-id/28/bb101859ec335beb6c491f5ccdc432d5845c59.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_spi.so.debug +File: /usr/lib/debug/.build-id/29 40755 root:root +File: /usr/lib/debug/.build-id/29/3b7d890b33e83b7a455f16704b9533426c5cf8 120777 root:root ../../../../bin/mb2hal +File: /usr/lib/debug/.build-id/29/3b7d890b33e83b7a455f16704b9533426c5cf8.debug 120777 root:root ../../usr/bin/mb2hal.debug File: /usr/lib/debug/.build-id/2b 40755 root:root -File: /usr/lib/debug/.build-id/2b/4d60371877b4c3e8c098344680dfca0a1ef637 120777 root:root ../../../linuxcnc/modules/mux2.so -File: /usr/lib/debug/.build-id/2b/4d60371877b4c3e8c098344680dfca0a1ef637.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux2.so.debug -File: /usr/lib/debug/.build-id/2f 40755 root:root -File: /usr/lib/debug/.build-id/2f/a3af6bede1acba898d27935986ea2671f7f29c 120777 root:root ../../../linuxcnc/modules/abs_s32.so -File: /usr/lib/debug/.build-id/2f/a3af6bede1acba898d27935986ea2671f7f29c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs_s32.so.debug -File: /usr/lib/debug/.build-id/30 40755 root:root -File: /usr/lib/debug/.build-id/30/32c3d677855f39cc94ca0357ac25ac80aec8b7 120777 root:root ../../../linuxcnc/modules/differential.so -File: /usr/lib/debug/.build-id/30/32c3d677855f39cc94ca0357ac25ac80aec8b7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/differential.so.debug -File: /usr/lib/debug/.build-id/32 40755 root:root -File: /usr/lib/debug/.build-id/32/c0090e35fce8850de3c314464d60dac02a86ef 120777 root:root ../../../python3/site-packages/_hal.so -File: /usr/lib/debug/.build-id/32/c0090e35fce8850de3c314464d60dac02a86ef.debug 120777 root:root ../../usr/lib/python3/site-packages/_hal.so.debug +File: /usr/lib/debug/.build-id/2b/f5ff0af872b89ca6b50da3f4743df255b67243 120777 root:root ../../../linuxcnc/modules/enum.so +File: /usr/lib/debug/.build-id/2b/f5ff0af872b89ca6b50da3f4743df255b67243.debug 120777 root:root ../../usr/lib/linuxcnc/modules/enum.so.debug +File: /usr/lib/debug/.build-id/31 40755 root:root +File: /usr/lib/debug/.build-id/31/df1814857bb4022bf2dfbb6f11b6c48b137a2f 120777 root:root ../../../linuxcnc/modules/hm2_7i90.so +File: /usr/lib/debug/.build-id/31/df1814857bb4022bf2dfbb6f11b6c48b137a2f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i90.so.debug File: /usr/lib/debug/.build-id/33 40755 root:root -File: /usr/lib/debug/.build-id/33/5e86810310f149ef54ce33b58a723e4f7cfda1 120777 root:root ../../../linuxcnc/modules/spindle.so -File: /usr/lib/debug/.build-id/33/5e86810310f149ef54ce33b58a723e4f7cfda1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle.so.debug -File: /usr/lib/debug/.build-id/33/8e336a9baf4e3a5ce522a95cdc12ad56c6783d 120777 root:root ../../../linuxcnc/modules/timedelay.so -File: /usr/lib/debug/.build-id/33/8e336a9baf4e3a5ce522a95cdc12ad56c6783d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelay.so.debug -File: /usr/lib/debug/.build-id/33/92b52984c5fa955ca6a864aed9660d582a8a8d 120777 root:root ../../../linuxcnc/modules/sim_axis_hardware.so -File: /usr/lib/debug/.build-id/33/92b52984c5fa955ca6a864aed9660d582a8a8d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_axis_hardware.so.debug -File: /usr/lib/debug/.build-id/36 40755 root:root -File: /usr/lib/debug/.build-id/36/b41b779d410be605d3cd9a15ca6d9e88a4ad28 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so -File: /usr/lib/debug/.build-id/36/b41b779d410be605d3cd9a15ca6d9e88a4ad28.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug +File: /usr/lib/debug/.build-id/33/04de053575e9dbe3bf9cccc8e9e3eeead8ffaf 120777 root:root ../../../linuxcnc/modules/hal_parport.so +File: /usr/lib/debug/.build-id/33/04de053575e9dbe3bf9cccc8e9e3eeead8ffaf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_parport.so.debug +File: /usr/lib/debug/.build-id/33/89cb66ff161d33db3da55999838d44067d3cb2 120777 root:root ../../../linuxcnc/modules/invert.so +File: /usr/lib/debug/.build-id/33/89cb66ff161d33db3da55999838d44067d3cb2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/invert.so.debug +File: /usr/lib/debug/.build-id/34 40755 root:root +File: /usr/lib/debug/.build-id/34/22a51d5fed56ede7d738de1cd7a0204fd80ca0 120777 root:root ../../../linuxcnc/modules/axistest.so +File: /usr/lib/debug/.build-id/34/22a51d5fed56ede7d738de1cd7a0204fd80ca0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/axistest.so.debug +File: /usr/lib/debug/.build-id/34/6f8cb031e6ba07778290344010aea1e903db6e 120777 root:root ../../../linuxcnc/modules/encoder_ratio.so +File: /usr/lib/debug/.build-id/34/6f8cb031e6ba07778290344010aea1e903db6e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder_ratio.so.debug File: /usr/lib/debug/.build-id/37 40755 root:root -File: /usr/lib/debug/.build-id/37/b0358f11f7ad4213944d9f6c897ebf37ca1b2c 120777 root:root ../../../linuxcnc/modules/bldc.so -File: /usr/lib/debug/.build-id/37/b0358f11f7ad4213944d9f6c897ebf37ca1b2c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bldc.so.debug +File: /usr/lib/debug/.build-id/37/c693dc55008a2daa46446c1b34192b7579cedb 120777 root:root ../../../../bin/pi500_vfd +File: /usr/lib/debug/.build-id/37/c693dc55008a2daa46446c1b34192b7579cedb.debug 120777 root:root ../../usr/bin/pi500_vfd.debug File: /usr/lib/debug/.build-id/38 40755 root:root -File: /usr/lib/debug/.build-id/38/b9941a3b7f020a102a60a6cce05b1dafbae40e 120777 root:root ../../../linuxcnc/modules/pentakins.so -File: /usr/lib/debug/.build-id/38/b9941a3b7f020a102a60a6cce05b1dafbae40e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pentakins.so.debug -File: /usr/lib/debug/.build-id/39 40755 root:root -File: /usr/lib/debug/.build-id/39/6b0d7c2309ef8020c0965979f9178d86474935 120777 root:root ../../../linuxcnc/modules/mult2.so -File: /usr/lib/debug/.build-id/39/6b0d7c2309ef8020c0965979f9178d86474935.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mult2.so.debug -File: /usr/lib/debug/.build-id/3b 40755 root:root -File: /usr/lib/debug/.build-id/3b/34162d748f6cdebdaf6fcc7cdc8f0e387facf1 120777 root:root ../../../linuxcnc/modules/ilowpass.so -File: /usr/lib/debug/.build-id/3b/34162d748f6cdebdaf6fcc7cdc8f0e387facf1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ilowpass.so.debug -File: /usr/lib/debug/.build-id/3b/a8697a2aeb9f9e4b8073402d384b71fa37ad43 120777 root:root ../../../linuxcnc/modules/conv_s32_bit.so -File: /usr/lib/debug/.build-id/3b/a8697a2aeb9f9e4b8073402d384b71fa37ad43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_bit.so.debug -File: /usr/lib/debug/.build-id/3c 40755 root:root -File: /usr/lib/debug/.build-id/3c/d71d9d7c45dc62b61a86fb89a71e3f7758431a 120777 root:root ../../../linuxcnc/modules/blend.so -File: /usr/lib/debug/.build-id/3c/d71d9d7c45dc62b61a86fb89a71e3f7758431a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/blend.so.debug +File: /usr/lib/debug/.build-id/38/075e7078dcd854f28adaab5215f8330d9bb1d3 120777 root:root ../../../linuxcnc/modules/scale.so +File: /usr/lib/debug/.build-id/38/075e7078dcd854f28adaab5215f8330d9bb1d3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scale.so.debug File: /usr/lib/debug/.build-id/3d 40755 root:root -File: /usr/lib/debug/.build-id/3d/418dccf088400fd97a118ecd5b20e447dd71f1 120777 root:root ../../../linuxcnc/modules/simple_tp.so -File: /usr/lib/debug/.build-id/3d/418dccf088400fd97a118ecd5b20e447dd71f1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/simple_tp.so.debug +File: /usr/lib/debug/.build-id/3d/f81c3b9924587cd2ffb67966ec09bc93e58f4e 120777 root:root ../../../linuxcnc/modules/pentakins.so +File: /usr/lib/debug/.build-id/3d/f81c3b9924587cd2ffb67966ec09bc93e58f4e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pentakins.so.debug File: /usr/lib/debug/.build-id/3e 40755 root:root -File: /usr/lib/debug/.build-id/3e/eb3e3cd1644a5461313a8311ee997df5b01370 120777 root:root ../../../linuxcnc/modules/scarakins.so -File: /usr/lib/debug/.build-id/3e/eb3e3cd1644a5461313a8311ee997df5b01370.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scarakins.so.debug -File: /usr/lib/debug/.build-id/3f 40755 root:root -File: /usr/lib/debug/.build-id/3f/cb07653439084b8850b4e2dd72dd0f3776d2c8 120777 root:root ../../../linuxcnc/modules/scope_rt.so -File: /usr/lib/debug/.build-id/3f/cb07653439084b8850b4e2dd72dd0f3776d2c8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scope_rt.so.debug +File: /usr/lib/debug/.build-id/3e/ad7ee5d9090379e6755fa9725c2557e2eaf7e2 120777 root:root ../../../linuxcnc/modules/corexy_by_hal.so +File: /usr/lib/debug/.build-id/3e/ad7ee5d9090379e6755fa9725c2557e2eaf7e2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/corexy_by_hal.so.debug File: /usr/lib/debug/.build-id/40 40755 root:root -File: /usr/lib/debug/.build-id/40/1aec2ff56f73b05125fd4fc64a75b7c26b9033 120777 root:root ../../../linuxcnc/modules/rotarydeltakins.so -File: /usr/lib/debug/.build-id/40/1aec2ff56f73b05125fd4fc64a75b7c26b9033.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotarydeltakins.so.debug +File: /usr/lib/debug/.build-id/40/b96e23b0235fe73f3317c91406650eacd645cc 120777 root:root ../../../linuxcnc/modules/conv_u32_s32.so +File: /usr/lib/debug/.build-id/40/b96e23b0235fe73f3317c91406650eacd645cc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_s32.so.debug File: /usr/lib/debug/.build-id/41 40755 root:root -File: /usr/lib/debug/.build-id/41/4b26daef31850705c3d56485b63fa9c75fd9fa 120777 root:root ../../../linuxcnc/modules/lowpass.so -File: /usr/lib/debug/.build-id/41/4b26daef31850705c3d56485b63fa9c75fd9fa.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lowpass.so.debug +File: /usr/lib/debug/.build-id/41/4256784dd96550427eb33b7f87ef40897894cc 120777 root:root ../../../linuxcnc/modules/conv_bit_s32.so +File: /usr/lib/debug/.build-id/41/4256784dd96550427eb33b7f87ef40897894cc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_s32.so.debug +File: /usr/lib/debug/.build-id/41/adb4fe26f4ad3987ff11283e5ca2c66aaf2065 120777 root:root ../../../linuxcnc/modules/mesa_7i65.so +File: /usr/lib/debug/.build-id/41/adb4fe26f4ad3987ff11283e5ca2c66aaf2065.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_7i65.so.debug File: /usr/lib/debug/.build-id/43 40755 root:root -File: /usr/lib/debug/.build-id/43/01312146cce2dc9d8d3973f35e2b78c9f57683 120777 root:root ../../../linuxcnc/modules/mux8.so -File: /usr/lib/debug/.build-id/43/01312146cce2dc9d8d3973f35e2b78c9f57683.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux8.so.debug -File: /usr/lib/debug/.build-id/43/b07f0ae2d3d6f0ca9fbd68ba3e205b269138c0 120777 root:root ../../../linuxcnc/modules/limit1.so -File: /usr/lib/debug/.build-id/43/b07f0ae2d3d6f0ca9fbd68ba3e205b269138c0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit1.so.debug +File: /usr/lib/debug/.build-id/43/746cdbd7ff72ab998d749193b7e38a24bf8e31 120777 root:root ../../../linuxcnc/modules/gray2bin.so +File: /usr/lib/debug/.build-id/43/746cdbd7ff72ab998d749193b7e38a24bf8e31.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gray2bin.so.debug +File: /usr/lib/debug/.build-id/43/884512fab9fec12a53de6caaf2fdfc95c107d0 120777 root:root ../../../../bin/rtapi_app +File: /usr/lib/debug/.build-id/43/884512fab9fec12a53de6caaf2fdfc95c107d0.debug 120777 root:root ../../usr/bin/rtapi_app.debug +File: /usr/lib/debug/.build-id/45 40755 root:root +File: /usr/lib/debug/.build-id/45/430668f444d0a73feb21be406bde949b038ae3 120777 root:root ../../../linuxcnc/modules/deadzone.so +File: /usr/lib/debug/.build-id/45/430668f444d0a73feb21be406bde949b038ae3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/deadzone.so.debug +File: /usr/lib/debug/.build-id/46 40755 root:root +File: /usr/lib/debug/.build-id/46/8aab21462ad16aaf2272e2e8ea3781f1baf4fd 120777 root:root ../../../linuxcnc/modules/match8.so +File: /usr/lib/debug/.build-id/46/8aab21462ad16aaf2272e2e8ea3781f1baf4fd.debug 120777 root:root ../../usr/lib/linuxcnc/modules/match8.so.debug File: /usr/lib/debug/.build-id/48 40755 root:root @@ -1682,67 +1666,53 @@ File: /usr/lib/debug/.build-id/48/ef0d6db7725249a8eb1a55b99289218cd0856f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/homemod.so.debug -File: /usr/lib/debug/.build-id/49 40755 root:root -File: /usr/lib/debug/.build-id/49/48e439b39624e15a273dedb99e440418e870ca 120777 root:root ../../../../bin/panelui -File: /usr/lib/debug/.build-id/49/48e439b39624e15a273dedb99e440418e870ca.debug 120777 root:root ../../usr/bin/panelui.debug -File: /usr/lib/debug/.build-id/49/725f85eebc2a4f0f36af3d947298a890ab8186 120777 root:root ../../../linuxcnc/modules/pumakins.so -File: /usr/lib/debug/.build-id/49/725f85eebc2a4f0f36af3d947298a890ab8186.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pumakins.so.debug -File: /usr/lib/debug/.build-id/49/8fa39da22f88b8ad603ebe55979078c09bff94 120777 root:root ../../../linuxcnc/modules/conv_float_s32.so -File: /usr/lib/debug/.build-id/49/8fa39da22f88b8ad603ebe55979078c09bff94.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_s32.so.debug -File: /usr/lib/debug/.build-id/49/dba11809658d3a49b121f2bbeb7368e8e1c20d 120777 root:root ../../../linuxcnc/modules/not.so -File: /usr/lib/debug/.build-id/49/dba11809658d3a49b121f2bbeb7368e8e1c20d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/not.so.debug -File: /usr/lib/debug/.build-id/4b 40755 root:root -File: /usr/lib/debug/.build-id/4b/127b47baf6c40009cb20c70a0c8102c54bcd4e 120777 root:root ../../../../bin/vfdb_vfd -File: /usr/lib/debug/.build-id/4b/127b47baf6c40009cb20c70a0c8102c54bcd4e.debug 120777 root:root ../../usr/bin/vfdb_vfd.debug +File: /usr/lib/debug/.build-id/4a 40755 root:root +File: /usr/lib/debug/.build-id/4a/28a346e64ffb8c27de2443fc80971f0464995c 120777 root:root ../../../linuxcnc/modules/limit3.so +File: /usr/lib/debug/.build-id/4a/28a346e64ffb8c27de2443fc80971f0464995c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit3.so.debug File: /usr/lib/debug/.build-id/4c 40755 root:root -File: /usr/lib/debug/.build-id/4c/18ee8556f342e70cf8ca8cabdb36e1378c25e1 120777 root:root ../../../linuxcnc/modules/debounce.so -File: /usr/lib/debug/.build-id/4c/18ee8556f342e70cf8ca8cabdb36e1378c25e1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/debounce.so.debug +File: /usr/lib/debug/.build-id/4c/49fc1dcb01215adb77dacd14a0eaf5ddbe69a1 120777 root:root ../../../linuxcnc/modules/edge.so +File: /usr/lib/debug/.build-id/4c/49fc1dcb01215adb77dacd14a0eaf5ddbe69a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/edge.so.debug +File: /usr/lib/debug/.build-id/4c/71f98922f6075404d561fd5998d9c5d3ab6fb4 120777 root:root ../../../../bin/classicladder +File: /usr/lib/debug/.build-id/4c/71f98922f6075404d561fd5998d9c5d3ab6fb4.debug 120777 root:root ../../usr/bin/classicladder.debug +File: /usr/lib/debug/.build-id/4c/ecd5e7871632f1de384668b4b8f8ab1736d60a 120777 root:root ../../../linuxcnc/modules/hal_pi_gpio.so +File: /usr/lib/debug/.build-id/4c/ecd5e7871632f1de384668b4b8f8ab1736d60a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_pi_gpio.so.debug +File: /usr/lib/debug/.build-id/4d 40755 root:root +File: /usr/lib/debug/.build-id/4d/2a272c1752b004801ee9a46e804ddaf1de3559 120777 root:root ../../../linuxcnc/modules/tristate_bit.so +File: /usr/lib/debug/.build-id/4d/2a272c1752b004801ee9a46e804ddaf1de3559.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_bit.so.debug File: /usr/lib/debug/.build-id/4e 40755 root:root -File: /usr/lib/debug/.build-id/4e/ae15b93fd22d4cd5425d9a1b9b1191b75e6d43 120777 root:root ../../../linuxcnc/modules/gearchange.so -File: /usr/lib/debug/.build-id/4e/ae15b93fd22d4cd5425d9a1b9b1191b75e6d43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gearchange.so.debug -File: /usr/lib/debug/.build-id/4f 40755 root:root -File: /usr/lib/debug/.build-id/4f/a9e44774bba5fff857afa538e1e269f8114795 120777 root:root ../../../../bin/motion-logger -File: /usr/lib/debug/.build-id/4f/a9e44774bba5fff857afa538e1e269f8114795.debug 120777 root:root ../../usr/bin/motion-logger.debug +File: /usr/lib/debug/.build-id/4e/4a7439bba6f86daf54402bace96903a6da6a40 120777 root:root ../../../../bin/wj200_vfd +File: /usr/lib/debug/.build-id/4e/4a7439bba6f86daf54402bace96903a6da6a40.debug 120777 root:root ../../usr/bin/wj200_vfd.debug +File: /usr/lib/debug/.build-id/50 40755 root:root +File: /usr/lib/debug/.build-id/50/0c0093b29acc8bbb8cd4eb5cc64b6203e3a6ae 120777 root:root ../../../linuxcnc/modules/mux4.so +File: /usr/lib/debug/.build-id/50/0c0093b29acc8bbb8cd4eb5cc64b6203e3a6ae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux4.so.debug +File: /usr/lib/debug/.build-id/50/689d85ba21f523d3d6a12380410fc0f7524ddf 120777 root:root ../../../linuxcnc/modules/max31855.so +File: /usr/lib/debug/.build-id/50/689d85ba21f523d3d6a12380410fc0f7524ddf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/max31855.so.debug +File: /usr/lib/debug/.build-id/50/7226cab6c979f4fb27eefc358ee3144046711d 120777 root:root ../../../linuxcnc/modules/xor2.so +File: /usr/lib/debug/.build-id/50/7226cab6c979f4fb27eefc358ee3144046711d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xor2.so.debug File: /usr/lib/debug/.build-id/51 40755 root:root -File: /usr/lib/debug/.build-id/51/722b4461a7959b4e1b379fd81d3b6f21280b6e 120777 root:root ../../../linuxcnc/modules/knob2float.so -File: /usr/lib/debug/.build-id/51/722b4461a7959b4e1b379fd81d3b6f21280b6e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/knob2float.so.debug -File: /usr/lib/debug/.build-id/51/a28ac9756f1cc782fe91be65ccfbbb7c8e7cb1 120777 root:root ../../../linuxcnc/modules/encoder_ratio.so -File: /usr/lib/debug/.build-id/51/a28ac9756f1cc782fe91be65ccfbbb7c8e7cb1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder_ratio.so.debug +File: /usr/lib/debug/.build-id/51/1bc0e0c570ef5d4d1836e09ac88640d70bec5c 120777 root:root ../../../../bin/halcmd +File: /usr/lib/debug/.build-id/51/1bc0e0c570ef5d4d1836e09ac88640d70bec5c.debug 120777 root:root ../../usr/bin/halcmd.debug +File: /usr/lib/debug/.build-id/51/ede65314dd697d5f7572a8d1d7aca956f3d99f 120777 root:root ../../../linuxcnc/modules/gantry.so +File: /usr/lib/debug/.build-id/51/ede65314dd697d5f7572a8d1d7aca956f3d99f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gantry.so.debug File: /usr/lib/debug/.build-id/52 40755 root:root -File: /usr/lib/debug/.build-id/52/12459547175c56b72fcf7c608e57ef375d27fc 120777 root:root ../../../linuxcnc/modules/match8.so -File: /usr/lib/debug/.build-id/52/12459547175c56b72fcf7c608e57ef375d27fc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/match8.so.debug -File: /usr/lib/debug/.build-id/52/9e499b1267d6862328e89f901c7f20dfdb2d9c 120777 root:root ../../../linuxcnc/modules/supply.so -File: /usr/lib/debug/.build-id/52/9e499b1267d6862328e89f901c7f20dfdb2d9c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/supply.so.debug -File: /usr/lib/debug/.build-id/53 40755 root:root -File: /usr/lib/debug/.build-id/53/07478d601e336af49036c2953078af137adb08 120777 root:root ../../../linuxcnc/modules/select8.so -File: /usr/lib/debug/.build-id/53/07478d601e336af49036c2953078af137adb08.debug 120777 root:root ../../usr/lib/linuxcnc/modules/select8.so.debug +File: /usr/lib/debug/.build-id/52/e38947e32dbf6dbf29668b8d0b7ab419a6e28b 120777 root:root ../../../linuxcnc/modules/xyzbc-trt-kins.so +File: /usr/lib/debug/.build-id/52/e38947e32dbf6dbf29668b8d0b7ab419a6e28b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzbc-trt-kins.so.debug +File: /usr/lib/debug/.build-id/54 40755 root:root +File: /usr/lib/debug/.build-id/54/77dc2dbbd3ccbf9cd81db3e56d7eeceddddd37 120777 root:root ../../../linuxcnc/modules/limit1.so +File: /usr/lib/debug/.build-id/54/77dc2dbbd3ccbf9cd81db3e56d7eeceddddd37.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit1.so.debug File: /usr/lib/debug/.build-id/55 40755 root:root -File: /usr/lib/debug/.build-id/55/c87d366c63ff57519fe79bdec12dfac49adfa6 120777 root:root ../../../../bin/tool_mmap_read -File: /usr/lib/debug/.build-id/55/c87d366c63ff57519fe79bdec12dfac49adfa6.debug 120777 root:root ../../usr/bin/tool_mmap_read.debug +File: /usr/lib/debug/.build-id/55/8bd4f903a0538a2ef2b87ebf7c59188ad7986d 120777 root:root ../../../../bin/gs2_vfd +File: /usr/lib/debug/.build-id/55/8bd4f903a0538a2ef2b87ebf7c59188ad7986d.debug 120777 root:root ../../usr/bin/gs2_vfd.debug +File: /usr/lib/debug/.build-id/56 40755 root:root +File: /usr/lib/debug/.build-id/56/99f2e2831fe6f069911258678f357b17d1cd24 120777 root:root ../../../../bin/linuxcncsvr +File: /usr/lib/debug/.build-id/56/99f2e2831fe6f069911258678f357b17d1cd24.debug 120777 root:root ../../usr/bin/linuxcncsvr.debug File: /usr/lib/debug/.build-id/57 40755 root:root -File: /usr/lib/debug/.build-id/57/639edf459b0ea77bc2789adbe04897f88c3f2d 120777 root:root ../../../linuxcnc/modules/near.so -File: /usr/lib/debug/.build-id/57/639edf459b0ea77bc2789adbe04897f88c3f2d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/near.so.debug -File: /usr/lib/debug/.build-id/59 40755 root:root -File: /usr/lib/debug/.build-id/59/382d94b5ca380f6c71bb2de357eb313101e3a3 120777 root:root ../../../linuxcnc/modules/hal_parport.so -File: /usr/lib/debug/.build-id/59/382d94b5ca380f6c71bb2de357eb313101e3a3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_parport.so.debug -File: /usr/lib/debug/.build-id/59/3bfe9b28dcb81c7399bb09204adaf6479de035 120777 root:root ../../../../bin/xhc-whb04b-6 -File: /usr/lib/debug/.build-id/59/3bfe9b28dcb81c7399bb09204adaf6479de035.debug 120777 root:root ../../usr/bin/xhc-whb04b-6.debug -File: /usr/lib/debug/.build-id/59/956011cfb6c7756647e401a4ca3abe56641d55 120777 root:root ../../../linuxcnc/modules/clarke2.so -File: /usr/lib/debug/.build-id/59/956011cfb6c7756647e401a4ca3abe56641d55.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke2.so.debug -File: /usr/lib/debug/.build-id/59/f9476243c2e5cef3cb09f3276f220bdf631e64 120777 root:root ../../../linuxcnc/modules/and2.so -File: /usr/lib/debug/.build-id/59/f9476243c2e5cef3cb09f3276f220bdf631e64.debug 120777 root:root ../../usr/lib/linuxcnc/modules/and2.so.debug +File: /usr/lib/debug/.build-id/57/ad5cdbc09fa04913d21ff40dfcfee34ae3f9f4 120777 root:root ../../../linuxcnc/modules/comp.so +File: /usr/lib/debug/.build-id/57/ad5cdbc09fa04913d21ff40dfcfee34ae3f9f4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/comp.so.debug File: /usr/lib/debug/.build-id/5b 40755 root:root -File: /usr/lib/debug/.build-id/5b/bf44ff3a039fa48b141d7031959f1260cc1693 120777 root:root ../../../linuxcnc/modules/threadtest.so -File: /usr/lib/debug/.build-id/5b/bf44ff3a039fa48b141d7031959f1260cc1693.debug 120777 root:root ../../usr/lib/linuxcnc/modules/threadtest.so.debug -File: /usr/lib/debug/.build-id/5b/e843efd8f9ca4ccc6187d45472227f5eea751f 120777 root:root ../../../linuxcnc/modules/constant.so -File: /usr/lib/debug/.build-id/5b/e843efd8f9ca4ccc6187d45472227f5eea751f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/constant.so.debug -File: /usr/lib/debug/.build-id/5c 40755 root:root -File: /usr/lib/debug/.build-id/5c/5ba5d70627b33523ac9c0cd304d466999a9400 120777 root:root ../../../linuxcnc/modules/conv_float_u32.so -File: /usr/lib/debug/.build-id/5c/5ba5d70627b33523ac9c0cd304d466999a9400.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_u32.so.debug +File: /usr/lib/debug/.build-id/5b/06eb0afb32cbccef8d1e1a536e3088b13912a3 120777 root:root ../../../linuxcnc/modules/ohmic.so +File: /usr/lib/debug/.build-id/5b/06eb0afb32cbccef8d1e1a536e3088b13912a3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ohmic.so.debug +File: /usr/lib/debug/.build-id/5b/98241933eff96a8bd066e0ff0d56a2a5132dda 120777 root:root ../../../linuxcnc/modules/integ.so +File: /usr/lib/debug/.build-id/5b/98241933eff96a8bd066e0ff0d56a2a5132dda.debug 120777 root:root ../../usr/lib/linuxcnc/modules/integ.so.debug File: /usr/lib/debug/.build-id/5d 40755 root:root -File: /usr/lib/debug/.build-id/5d/171b0326b19a32098a36a5b2f1dee1cefbee1e 120777 root:root ../../../linuxcnc/modules/sample_hold.so -File: /usr/lib/debug/.build-id/5d/171b0326b19a32098a36a5b2f1dee1cefbee1e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sample_hold.so.debug -File: /usr/lib/debug/.build-id/5d/8fed74318b1a07a81c0c3bfa138d322a95d115 120777 root:root ../../../linuxcnc/modules/5axiskins.so -File: /usr/lib/debug/.build-id/5d/8fed74318b1a07a81c0c3bfa138d322a95d115.debug 120777 root:root ../../usr/lib/linuxcnc/modules/5axiskins.so.debug -File: /usr/lib/debug/.build-id/5e 40755 root:root -File: /usr/lib/debug/.build-id/5e/60a89ea0395f4a7c94e523f0ca8033c7689269 120777 root:root ../../../linuxcnc/modules/orient.so -File: /usr/lib/debug/.build-id/5e/60a89ea0395f4a7c94e523f0ca8033c7689269.debug 120777 root:root ../../usr/lib/linuxcnc/modules/orient.so.debug +File: /usr/lib/debug/.build-id/5d/ae2f541f0d9a8a2b7970434922ccbc3e5132a1 120777 root:root ../../../linuxcnc/modules/latencybins.so +File: /usr/lib/debug/.build-id/5d/ae2f541f0d9a8a2b7970434922ccbc3e5132a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/latencybins.so.debug File: /usr/lib/debug/.build-id/5f 40755 root:root @@ -1750,254 +1720,247 @@ File: /usr/lib/debug/.build-id/5f/0fb9db44e1a735031721d8de2284e4e4f3f64d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/counter.so.debug -File: /usr/lib/debug/.build-id/5f/a4349a686af4110edd99f1b6d2949870c3977c 120777 root:root ../../../linuxcnc/modules/bitwise.so -File: /usr/lib/debug/.build-id/5f/a4349a686af4110edd99f1b6d2949870c3977c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitwise.so.debug -File: /usr/lib/debug/.build-id/5f/cefdebb70ac5b3bbe9d91f1908fbfd10b264c3 120777 root:root ../../../linuxcnc/modules/conv_bit_u32.so -File: /usr/lib/debug/.build-id/5f/cefdebb70ac5b3bbe9d91f1908fbfd10b264c3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_u32.so.debug +File: /usr/lib/debug/.build-id/5f/a5b6347a376efd31a0152f91949c4482d0d3d0 120777 root:root ../../../linuxcnc/modules/limit_axis.so +File: /usr/lib/debug/.build-id/5f/a5b6347a376efd31a0152f91949c4482d0d3d0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit_axis.so.debug +File: /usr/lib/debug/.build-id/5f/aa7e3c3ed980a2feb7dcab7bc8b2da08359618 120777 root:root ../../../linuxcnc/modules/sim_axis_hardware.so +File: /usr/lib/debug/.build-id/5f/aa7e3c3ed980a2feb7dcab7bc8b2da08359618.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_axis_hardware.so.debug +File: /usr/lib/debug/.build-id/60 40755 root:root +File: /usr/lib/debug/.build-id/60/5eda016ddc3514df17901ada6643a045ff1118 120777 root:root ../../../linuxcnc/modules/filter_kalman.so +File: /usr/lib/debug/.build-id/60/5eda016ddc3514df17901ada6643a045ff1118.debug 120777 root:root ../../usr/lib/linuxcnc/modules/filter_kalman.so.debug File: /usr/lib/debug/.build-id/61 40755 root:root -File: /usr/lib/debug/.build-id/61/9008fccc3ef50313442234b491275b6cd41800 120777 root:root ../../../linuxcnc/modules/plasmac.so -File: /usr/lib/debug/.build-id/61/9008fccc3ef50313442234b491275b6cd41800.debug 120777 root:root ../../usr/lib/linuxcnc/modules/plasmac.so.debug +File: /usr/lib/debug/.build-id/61/20c371b8de23c0f49bf840ca4908973d2bb90e 120777 root:root ../../../linuxcnc/modules/hm2_rpspi.so +File: /usr/lib/debug/.build-id/61/20c371b8de23c0f49bf840ca4908973d2bb90e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_rpspi.so.debug +File: /usr/lib/debug/.build-id/61/e8189ef6313d5fbd470f4549c58e05af749c84 120777 root:root ../../../linuxcnc/modules/millturn.so +File: /usr/lib/debug/.build-id/61/e8189ef6313d5fbd470f4549c58e05af749c84.debug 120777 root:root ../../usr/lib/linuxcnc/modules/millturn.so.debug +File: /usr/lib/debug/.build-id/62 40755 root:root +File: /usr/lib/debug/.build-id/62/9728d7e7f09cef099f9388666c06e3ac8a404a 120777 root:root ../../../linuxcnc/modules/demux.so +File: /usr/lib/debug/.build-id/62/9728d7e7f09cef099f9388666c06e3ac8a404a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/demux.so.debug +File: /usr/lib/debug/.build-id/62/af7b68c4c16c20bcc21da9f4f38a9d5862f46d 120777 root:root ../../../linuxcnc/modules/spindle_monitor.so +File: /usr/lib/debug/.build-id/62/af7b68c4c16c20bcc21da9f4f38a9d5862f46d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle_monitor.so.debug File: /usr/lib/debug/.build-id/65 40755 root:root -File: /usr/lib/debug/.build-id/65/bff1395e58163afa05d4a885d5b816245b77d5 120777 root:root ../../../linuxcnc/modules/wcomp.so -File: /usr/lib/debug/.build-id/65/bff1395e58163afa05d4a885d5b816245b77d5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/wcomp.so.debug -File: /usr/lib/debug/.build-id/68 40755 root:root -File: /usr/lib/debug/.build-id/68/5ffc0be403e8a82d3f669da9b3b6542b501556 120777 root:root ../../../linuxcnc/modules/mux4.so -File: /usr/lib/debug/.build-id/68/5ffc0be403e8a82d3f669da9b3b6542b501556.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux4.so.debug +File: /usr/lib/debug/.build-id/65/60b6086dd62a2d8ebae965b991cbec5a84cf52 120777 root:root ../../../linuxcnc/modules/serport.so +File: /usr/lib/debug/.build-id/65/60b6086dd62a2d8ebae965b991cbec5a84cf52.debug 120777 root:root ../../usr/lib/linuxcnc/modules/serport.so.debug File: /usr/lib/debug/.build-id/69 40755 root:root -File: /usr/lib/debug/.build-id/69/5e5575772f530d0ad3e2e872fb6dddad7a0f87 120777 root:root ../../../linuxcnc/modules/filter_kalman.so -File: /usr/lib/debug/.build-id/69/5e5575772f530d0ad3e2e872fb6dddad7a0f87.debug 120777 root:root ../../usr/lib/linuxcnc/modules/filter_kalman.so.debug +File: /usr/lib/debug/.build-id/69/2bd7e3908161841915c6e57ee8d1ad54c0121b 120777 root:root ../../../linuxcnc/modules/mux8.so +File: /usr/lib/debug/.build-id/69/2bd7e3908161841915c6e57ee8d1ad54c0121b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux8.so.debug File: /usr/lib/debug/.build-id/6a 40755 root:root -File: /usr/lib/debug/.build-id/6a/b7ca8bfb41ee4d6707392c873feadabab68773 120777 root:root ../../../linuxcnc/modules/hal_gm.so -File: /usr/lib/debug/.build-id/6a/b7ca8bfb41ee4d6707392c873feadabab68773.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_gm.so.debug -File: /usr/lib/debug/.build-id/6a/e4cd21e0a523d6d9acd07a245b33bdfc522d70 120777 root:root ../../../linuxcnc/modules/biquad.so -File: /usr/lib/debug/.build-id/6a/e4cd21e0a523d6d9acd07a245b33bdfc522d70.debug 120777 root:root ../../usr/lib/linuxcnc/modules/biquad.so.debug +File: /usr/lib/debug/.build-id/6a/38036842b01d750da2214f7b625af2189ed172 120777 root:root ../../../python3/site-packages/_hal.so +File: /usr/lib/debug/.build-id/6a/38036842b01d750da2214f7b625af2189ed172.debug 120777 root:root ../../usr/lib/python3/site-packages/_hal.so.debug +File: /usr/lib/debug/.build-id/6a/59ac8ed361dbca0f29a92f322131e200c4fc34 120777 root:root ../../../linuxcnc/modules/select8.so +File: /usr/lib/debug/.build-id/6a/59ac8ed361dbca0f29a92f322131e200c4fc34.debug 120777 root:root ../../usr/lib/linuxcnc/modules/select8.so.debug File: /usr/lib/debug/.build-id/6b 40755 root:root -File: /usr/lib/debug/.build-id/6b/525913ec3c8e06e7453e858cd642c8de2a0dbc 120777 root:root ../../../linuxcnc/modules/message.so -File: /usr/lib/debug/.build-id/6b/525913ec3c8e06e7453e858cd642c8de2a0dbc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/message.so.debug -File: /usr/lib/debug/.build-id/6b/755a8c89f842a5e17465fe45152342416cafe7 120777 root:root ../../../linuxcnc/modules/mesa_7i65.so -File: /usr/lib/debug/.build-id/6b/755a8c89f842a5e17465fe45152342416cafe7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_7i65.so.debug -File: /usr/lib/debug/.build-id/6f 40755 root:root -File: /usr/lib/debug/.build-id/6f/167976e10d4cd8142a46b0b9ee36f1028d34e5 120777 root:root ../../../linuxcnc/modules/histobins.so -File: /usr/lib/debug/.build-id/6f/167976e10d4cd8142a46b0b9ee36f1028d34e5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/histobins.so.debug -File: /usr/lib/debug/.build-id/6f/5a2b7a7924ad97cc79673a3282a3fb26d48ebc 120777 root:root ../../../linuxcnc/modules/encoder.so -File: /usr/lib/debug/.build-id/6f/5a2b7a7924ad97cc79673a3282a3fb26d48ebc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder.so.debug +File: /usr/lib/debug/.build-id/6b/d2845eb6a6e340cd0c0499d930750750e2f9ac 120777 root:root ../../../linuxcnc/modules/mesa_pktgyro_test.so +File: /usr/lib/debug/.build-id/6b/d2845eb6a6e340cd0c0499d930750750e2f9ac.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_pktgyro_test.so.debug +File: /usr/lib/debug/.build-id/6c 40755 root:root +File: /usr/lib/debug/.build-id/6c/400c319dc77496f8c27d08a0fa683771aa8543 120777 root:root ../../../linuxcnc/modules/lincurve.so +File: /usr/lib/debug/.build-id/6c/400c319dc77496f8c27d08a0fa683771aa8543.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lincurve.so.debug +File: /usr/lib/debug/.build-id/6d 40755 root:root +File: /usr/lib/debug/.build-id/6d/2cfb9e3c76585e2f8bbf3c12ca8a47f949d4c5 120777 root:root ../../../linuxcnc/modules/steptest.so +File: /usr/lib/debug/.build-id/6d/2cfb9e3c76585e2f8bbf3c12ca8a47f949d4c5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/steptest.so.debug +File: /usr/lib/debug/.build-id/6e 40755 root:root +File: /usr/lib/debug/.build-id/6e/5724018f48eeea399ceef593a1d6c995416b36 120777 root:root ../../../linuxcnc/modules/div2.so +File: /usr/lib/debug/.build-id/6e/5724018f48eeea399ceef593a1d6c995416b36.debug 120777 root:root ../../usr/lib/linuxcnc/modules/div2.so.debug File: /usr/lib/debug/.build-id/70 40755 root:root -File: /usr/lib/debug/.build-id/70/9a8e38077fd4510a5cb1cd243bdf1544667201 120777 root:root ../../../linuxcnc/modules/timedelta.so -File: /usr/lib/debug/.build-id/70/9a8e38077fd4510a5cb1cd243bdf1544667201.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelta.so.debug +File: /usr/lib/debug/.build-id/70/2e3ce346206f8b61640db7a5fc3ebc9a2d7e2a 120777 root:root ../../../../bin/shuttle +File: /usr/lib/debug/.build-id/70/2e3ce346206f8b61640db7a5fc3ebc9a2d7e2a.debug 120777 root:root ../../usr/bin/shuttle.debug +File: /usr/lib/debug/.build-id/70/b2a655c69789ba435fd60aa05f4caaba7009fe 120777 root:root ../../../linuxcnc/modules/conv_bit_float.so +File: /usr/lib/debug/.build-id/70/b2a655c69789ba435fd60aa05f4caaba7009fe.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_float.so.debug +File: /usr/lib/debug/.build-id/71 40755 root:root +File: /usr/lib/debug/.build-id/71/3e738dc4e95e4c9aef0dfda249113edfca1dd4 120777 root:root ../../../linuxcnc/modules/sim_encoder.so +File: /usr/lib/debug/.build-id/71/3e738dc4e95e4c9aef0dfda249113edfca1dd4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_encoder.so.debug File: /usr/lib/debug/.build-id/72 40755 root:root -File: /usr/lib/debug/.build-id/72/42ab54a345918ea80dbc138b8f913a112179e2 120777 root:root ../../../linuxcnc/modules/joyhandle.so -File: /usr/lib/debug/.build-id/72/42ab54a345918ea80dbc138b8f913a112179e2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/joyhandle.so.debug -File: /usr/lib/debug/.build-id/72/cd0931b298e05d551700649439e868b1d34341 120777 root:root ../../../linuxcnc/modules/tp.so -File: /usr/lib/debug/.build-id/72/cd0931b298e05d551700649439e868b1d34341.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tp.so.debug +File: /usr/lib/debug/.build-id/72/2dcd43798adb1e981e6b1eda86072633d726f3 120777 root:root ../../../linuxcnc/modules/hal_gm.so +File: /usr/lib/debug/.build-id/72/2dcd43798adb1e981e6b1eda86072633d726f3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_gm.so.debug File: /usr/lib/debug/.build-id/74 40755 root:root -File: /usr/lib/debug/.build-id/74/9b135a95dd78110ae07e19846f4537a013423b 120777 root:root ../../../../bin/linuxcnc_module_helper -File: /usr/lib/debug/.build-id/74/9b135a95dd78110ae07e19846f4537a013423b.debug 120777 root:root ../../usr/bin/linuxcnc_module_helper.debug -File: /usr/lib/debug/.build-id/75 40755 root:root -File: /usr/lib/debug/.build-id/75/8078b59305602b95e5a7c618e46c2023d2abdf 120777 root:root ../../../linuxcnc/modules/limit3.so -File: /usr/lib/debug/.build-id/75/8078b59305602b95e5a7c618e46c2023d2abdf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit3.so.debug -File: /usr/lib/debug/.build-id/77 40755 root:root -File: /usr/lib/debug/.build-id/77/2553b83ddb4ab3141f94cc310345a8c0b0e435 120777 root:root ../../../linuxcnc/modules/ohmic.so -File: /usr/lib/debug/.build-id/77/2553b83ddb4ab3141f94cc310345a8c0b0e435.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ohmic.so.debug +File: /usr/lib/debug/.build-id/74/77c075811d5ae4796726554df284e34c7acfff 120777 root:root ../../../linuxcnc/modules/tpmod.so +File: /usr/lib/debug/.build-id/74/77c075811d5ae4796726554df284e34c7acfff.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tpmod.so.debug +File: /usr/lib/debug/.build-id/76 40755 root:root +File: /usr/lib/debug/.build-id/76/1048fa239110ff97702bee5d7f77d4b1d424a9 120777 root:root ../../../../bin/genserkins +File: /usr/lib/debug/.build-id/76/1048fa239110ff97702bee5d7f77d4b1d424a9.debug 120777 root:root ../../usr/bin/genserkins.debug +File: /usr/lib/debug/.build-id/76/d4f4841ef8826c349e743a4f427b9e73fc30fa 120777 root:root ../../../linuxcnc/modules/histobins.so +File: /usr/lib/debug/.build-id/76/d4f4841ef8826c349e743a4f427b9e73fc30fa.debug 120777 root:root ../../usr/lib/linuxcnc/modules/histobins.so.debug File: /usr/lib/debug/.build-id/78 40755 root:root -File: /usr/lib/debug/.build-id/78/0424e574a2f4b180582b1a46a0fcb0d4c711fe 120777 root:root ../../../../bin/thermistor -File: /usr/lib/debug/.build-id/78/0424e574a2f4b180582b1a46a0fcb0d4c711fe.debug 120777 root:root ../../usr/bin/thermistor.debug +File: /usr/lib/debug/.build-id/78/b6ec12f9bc09470ba099075715b804e1e1f9b5 120777 root:root ../../../linuxcnc/modules/multiswitch.so +File: /usr/lib/debug/.build-id/78/b6ec12f9bc09470ba099075715b804e1e1f9b5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiswitch.so.debug File: /usr/lib/debug/.build-id/79 40755 root:root -File: /usr/lib/debug/.build-id/79/03fa5fd13888513b1d44e50b9dabe66b1caeba 120777 root:root ../../../linuxcnc/modules/tristate_float.so -File: /usr/lib/debug/.build-id/79/03fa5fd13888513b1d44e50b9dabe66b1caeba.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_float.so.debug +File: /usr/lib/debug/.build-id/79/ee80128ffd3368441650444dec74fadf477667 120777 root:root ../../../linuxcnc/modules/sim_home_switch.so +File: /usr/lib/debug/.build-id/79/ee80128ffd3368441650444dec74fadf477667.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_home_switch.so.debug File: /usr/lib/debug/.build-id/7a 40755 root:root -File: /usr/lib/debug/.build-id/7a/af8a04775100dd1594c50d41492dd158830c7d 120777 root:root ../../../linuxcnc/modules/steptest.so -File: /usr/lib/debug/.build-id/7a/af8a04775100dd1594c50d41492dd158830c7d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/steptest.so.debug -File: /usr/lib/debug/.build-id/7a/c4f109a063ee37d3746598a2f86870880c03b1 120777 root:root ../../../linuxcnc/modules/lut5.so -File: /usr/lib/debug/.build-id/7a/c4f109a063ee37d3746598a2f86870880c03b1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lut5.so.debug -File: /usr/lib/debug/.build-id/7c 40755 root:root -File: /usr/lib/debug/.build-id/7c/366d53c6bd348f0e67271ad0e32561634a805c 120777 root:root ../../../linuxcnc/modules/pid.so -File: /usr/lib/debug/.build-id/7c/366d53c6bd348f0e67271ad0e32561634a805c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pid.so.debug -File: /usr/lib/debug/.build-id/7c/64885986d9a0e75c60bdbfe4af80813605d69b 120777 root:root ../../../linuxcnc/modules/hal_ppmc.so -File: /usr/lib/debug/.build-id/7c/64885986d9a0e75c60bdbfe4af80813605d69b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_ppmc.so.debug +File: /usr/lib/debug/.build-id/7a/188e4ef685628af2eec40f9484e6df2a904aaf 120777 root:root ../../../linuxcnc/modules/toggle2nist.so +File: /usr/lib/debug/.build-id/7a/188e4ef685628af2eec40f9484e6df2a904aaf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle2nist.so.debug +File: /usr/lib/debug/.build-id/7d 40755 root:root +File: /usr/lib/debug/.build-id/7d/40bb0212f1420114216bb8597969330a12cf14 120777 root:root ../../../linuxcnc/modules/toggle.so +File: /usr/lib/debug/.build-id/7d/40bb0212f1420114216bb8597969330a12cf14.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle.so.debug +File: /usr/lib/debug/.build-id/7d/451ad165b3ef58c05e6eae6447376f74e391e6 120777 root:root ../../../linuxcnc/modules/dbounce.so +File: /usr/lib/debug/.build-id/7d/451ad165b3ef58c05e6eae6447376f74e391e6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/dbounce.so.debug +File: /usr/lib/debug/.build-id/7e 40755 root:root +File: /usr/lib/debug/.build-id/7e/0d1967cc45bc4bce9c1b0c515a447de2e72da7 120777 root:root ../../../linuxcnc/modules/estop_latch.so +File: /usr/lib/debug/.build-id/7e/0d1967cc45bc4bce9c1b0c515a447de2e72da7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/estop_latch.so.debug File: /usr/lib/debug/.build-id/7f 40755 root:root -File: /usr/lib/debug/.build-id/7f/fff82e923490a2b82bdc2463dbbadd320a97a4 120777 root:root ../../../../bin/linuxcnclcd -File: /usr/lib/debug/.build-id/7f/fff82e923490a2b82bdc2463dbbadd320a97a4.debug 120777 root:root ../../usr/bin/linuxcnclcd.debug -File: /usr/lib/debug/.build-id/80 40755 root:root -File: /usr/lib/debug/.build-id/80/444e9891efa9065f71d74a8363b2f041c775a1 120777 root:root ../../../linuxcnc/modules/scaled_s32_sums.so -File: /usr/lib/debug/.build-id/80/444e9891efa9065f71d74a8363b2f041c775a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scaled_s32_sums.so.debug +File: /usr/lib/debug/.build-id/7f/b33cb54a1088d65a78c88810172621c156848c 120777 root:root ../../../linuxcnc/modules/conv_float_s32.so +File: /usr/lib/debug/.build-id/7f/b33cb54a1088d65a78c88810172621c156848c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_s32.so.debug +File: /usr/lib/debug/.build-id/7f/e822537556e0a57524713ba71dc615354bf3da 120777 root:root ../../../linuxcnc/modules/xyzac-trt-kins.so +File: /usr/lib/debug/.build-id/7f/e822537556e0a57524713ba71dc615354bf3da.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzac-trt-kins.so.debug File: /usr/lib/debug/.build-id/82 40755 root:root -File: /usr/lib/debug/.build-id/82/4edafa628f63a1fb0e23ae7c8cd9be3e6bdde6 120777 root:root ../../../../bin/xhc-hb04 -File: /usr/lib/debug/.build-id/82/4edafa628f63a1fb0e23ae7c8cd9be3e6bdde6.debug 120777 root:root ../../usr/bin/xhc-hb04.debug -File: /usr/lib/debug/.build-id/82/a7c16cefe5ddd4380d99cf10d39129f75aacd0 120777 root:root ../../../../bin/vfs11_vfd -File: /usr/lib/debug/.build-id/82/a7c16cefe5ddd4380d99cf10d39129f75aacd0.debug 120777 root:root ../../usr/bin/vfs11_vfd.debug -File: /usr/lib/debug/.build-id/83 40755 root:root -File: /usr/lib/debug/.build-id/83/84a94ebc17356d36397348b497b5af7d84da6f 120777 root:root ../../../linuxcnc/modules/hal_lib.so -File: /usr/lib/debug/.build-id/83/84a94ebc17356d36397348b497b5af7d84da6f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_lib.so.debug +File: /usr/lib/debug/.build-id/82/b6274795022445561b9ffaa486f8895fbd9328 120777 root:root ../../../linuxcnc/modules/sampler.so +File: /usr/lib/debug/.build-id/82/b6274795022445561b9ffaa486f8895fbd9328.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sampler.so.debug File: /usr/lib/debug/.build-id/84 40755 root:root -File: /usr/lib/debug/.build-id/84/795d854ec7f208bc6edc3356d64eea1f846843 120777 root:root ../../../tcl/linuxcnc/hal.so -File: /usr/lib/debug/.build-id/84/795d854ec7f208bc6edc3356d64eea1f846843.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/hal.so.debug -File: /usr/lib/debug/.build-id/84/c4fd95d3f7333477a56a88a51857d091948bc4 120777 root:root ../../../linuxcnc/modules/hal_bb_gpio.so -File: /usr/lib/debug/.build-id/84/c4fd95d3f7333477a56a88a51857d091948bc4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_bb_gpio.so.debug -File: /usr/lib/debug/.build-id/84/db2a55674b781b2dc744be61ffe882d210c450 120777 root:root ../../../linuxcnc/modules/eoffset_per_angle.so -File: /usr/lib/debug/.build-id/84/db2a55674b781b2dc744be61ffe882d210c450.debug 120777 root:root ../../usr/lib/linuxcnc/modules/eoffset_per_angle.so.debug +File: /usr/lib/debug/.build-id/84/41a615a9ec1043dc14966036e3ec96728b2411 120777 root:root ../../../../bin/sendkeys +File: /usr/lib/debug/.build-id/84/41a615a9ec1043dc14966036e3ec96728b2411.debug 120777 root:root ../../usr/bin/sendkeys.debug File: /usr/lib/debug/.build-id/85 40755 root:root -File: /usr/lib/debug/.build-id/85/7c4bb881ffbcca368453ad1ef6a60dd46807f7 120777 root:root ../../../linuxcnc/modules/motmod.so -File: /usr/lib/debug/.build-id/85/7c4bb881ffbcca368453ad1ef6a60dd46807f7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/motmod.so.debug -File: /usr/lib/debug/.build-id/86 40755 root:root -File: /usr/lib/debug/.build-id/86/4bd15072291ca55f43c8274905f12cf25395da 120777 root:root ../../../linuxcnc/modules/hm2_pci.so -File: /usr/lib/debug/.build-id/86/4bd15072291ca55f43c8274905f12cf25395da.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_pci.so.debug -File: /usr/lib/debug/.build-id/86/ff316cc22b30921975ec79a5f5ca6c0c25625d 120777 root:root ../../../linuxcnc/modules/weighted_sum.so -File: /usr/lib/debug/.build-id/86/ff316cc22b30921975ec79a5f5ca6c0c25625d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/weighted_sum.so.debug -File: /usr/lib/debug/.build-id/87 40755 root:root -File: /usr/lib/debug/.build-id/87/deda019af17a6eec2010b695485a22fb6b9a33 120777 root:root ../../../linuxcnc/modules/spindle_monitor.so -File: /usr/lib/debug/.build-id/87/deda019af17a6eec2010b695485a22fb6b9a33.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle_monitor.so.debug +File: /usr/lib/debug/.build-id/85/b67ee4dbbcee1c6c6ca6cfffdaa699460d6d86 120777 root:root ../../../linuxcnc/modules/lcd.so +File: /usr/lib/debug/.build-id/85/b67ee4dbbcee1c6c6ca6cfffdaa699460d6d86.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lcd.so.debug +File: /usr/lib/debug/.build-id/89 40755 root:root +File: /usr/lib/debug/.build-id/89/f44ae9b2aae3a493ba0b8a65ff34ea83b10988 120777 root:root ../../../linuxcnc/modules/plasmac.so +File: /usr/lib/debug/.build-id/89/f44ae9b2aae3a493ba0b8a65ff34ea83b10988.debug 120777 root:root ../../usr/lib/linuxcnc/modules/plasmac.so.debug File: /usr/lib/debug/.build-id/8a 40755 root:root -File: /usr/lib/debug/.build-id/8a/7aded44620793864290737405dd47bfa3edeb7 120777 root:root ../../../linuxcnc/modules/offset.so -File: /usr/lib/debug/.build-id/8a/7aded44620793864290737405dd47bfa3edeb7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/offset.so.debug +File: /usr/lib/debug/.build-id/8a/1b306e3f5bc982f5b35262a57e372e5cccf726 120777 root:root ../../../linuxcnc/modules/clarkeinv.so +File: /usr/lib/debug/.build-id/8a/1b306e3f5bc982f5b35262a57e372e5cccf726.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarkeinv.so.debug +File: /usr/lib/debug/.build-id/8c 40755 root:root +File: /usr/lib/debug/.build-id/8c/e3865791d0ef333fb8552feb61015cc472345c 120777 root:root ../../../linuxcnc/modules/pid.so +File: /usr/lib/debug/.build-id/8c/e3865791d0ef333fb8552feb61015cc472345c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pid.so.debug File: /usr/lib/debug/.build-id/8d 40755 root:root -File: /usr/lib/debug/.build-id/8d/74bb87702fe1a9991708612bbc5c5cd6039fab 120777 root:root ../../../linuxcnc/modules/bitslice.so -File: /usr/lib/debug/.build-id/8d/74bb87702fe1a9991708612bbc5c5cd6039fab.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitslice.so.debug +File: /usr/lib/debug/.build-id/8d/099c86f9990eaa2bf7fe032812dae0ad190f3d 120777 root:root ../../../linuxcnc/modules/pumakins.so +File: /usr/lib/debug/.build-id/8d/099c86f9990eaa2bf7fe032812dae0ad190f3d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pumakins.so.debug +File: /usr/lib/debug/.build-id/8d/4d4dadb415d780ad62bbefa43f043f5bbee83a 120777 root:root ../../../python3/site-packages/gcode.so +File: /usr/lib/debug/.build-id/8d/4d4dadb415d780ad62bbefa43f043f5bbee83a.debug 120777 root:root ../../usr/lib/python3/site-packages/gcode.so.debug File: /usr/lib/debug/.build-id/8e 40755 root:root -File: /usr/lib/debug/.build-id/8e/c2cb7a879f8718a30060d70071622c40492fcf 120777 root:root ../../../linuxcnc/modules/streamer.so -File: /usr/lib/debug/.build-id/8e/c2cb7a879f8718a30060d70071622c40492fcf.debug 120777 root:root ../../usr/lib/linuxcnc/modules/streamer.so.debug +File: /usr/lib/debug/.build-id/8e/821b0c116eb13afaa4eb8e65483a0d6eb7f100 120777 root:root ../../../../bin/tool_mmap_read +File: /usr/lib/debug/.build-id/8e/821b0c116eb13afaa4eb8e65483a0d6eb7f100.debug 120777 root:root ../../usr/bin/tool_mmap_read.debug File: /usr/lib/debug/.build-id/8f 40755 root:root -File: /usr/lib/debug/.build-id/8f/2b5116e42a4c7b64ccece538b4435ea8356a3b 120777 root:root ../../../linuxcnc/modules/conv_bit_float.so -File: /usr/lib/debug/.build-id/8f/2b5116e42a4c7b64ccece538b4435ea8356a3b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_float.so.debug -File: /usr/lib/debug/.build-id/8f/d7b096174d7c05c121454672ff6bd237997040 120777 root:root ../../../linuxcnc/modules/dbounce.so -File: /usr/lib/debug/.build-id/8f/d7b096174d7c05c121454672ff6bd237997040.debug 120777 root:root ../../usr/lib/linuxcnc/modules/dbounce.so.debug -File: /usr/lib/debug/.build-id/90 40755 root:root -File: /usr/lib/debug/.build-id/90/168af1be5890f57ab3e6c1b38f3fd74130dd37 120777 root:root ../../../linuxcnc/modules/mux_generic.so -File: /usr/lib/debug/.build-id/90/168af1be5890f57ab3e6c1b38f3fd74130dd37.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux_generic.so.debug -File: /usr/lib/debug/.build-id/91 40755 root:root -File: /usr/lib/debug/.build-id/91/73893d26e919bdf79a14dd5b80ac5322eed4f6 120777 root:root ../../../linuxcnc/modules/conv_u32_float.so -File: /usr/lib/debug/.build-id/91/73893d26e919bdf79a14dd5b80ac5322eed4f6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_float.so.debug -File: /usr/lib/debug/.build-id/93 40755 root:root -File: /usr/lib/debug/.build-id/93/2f32c2e65cf9a3fd3ab5e37a93406ed4422228 120777 root:root ../../../linuxcnc/modules/div2.so -File: /usr/lib/debug/.build-id/93/2f32c2e65cf9a3fd3ab5e37a93406ed4422228.debug 120777 root:root ../../usr/lib/linuxcnc/modules/div2.so.debug +File: /usr/lib/debug/.build-id/8f/7b95eb80aee15e1fa987d1b324dda58152a1f0 120777 root:root ../../../../bin/hy_gt_vfd +File: /usr/lib/debug/.build-id/8f/7b95eb80aee15e1fa987d1b324dda58152a1f0.debug 120777 root:root ../../usr/bin/hy_gt_vfd.debug +File: /usr/lib/debug/.build-id/92 40755 root:root +File: /usr/lib/debug/.build-id/92/005e7334e213e810448a216941dc337a9f54ac 120777 root:root ../../../linuxcnc/modules/anglejog.so +File: /usr/lib/debug/.build-id/92/005e7334e213e810448a216941dc337a9f54ac.debug 120777 root:root ../../usr/lib/linuxcnc/modules/anglejog.so.debug +File: /usr/lib/debug/.build-id/92/0ccb0262325de7486c3eb84981652c7bdbdb3d 120777 root:root ../../../../bin/linuxcnclcd +File: /usr/lib/debug/.build-id/92/0ccb0262325de7486c3eb84981652c7bdbdb3d.debug 120777 root:root ../../usr/bin/linuxcnclcd.debug +File: /usr/lib/debug/.build-id/92/3108d3d6d910f5e8a8d6643b99f46024ece1a4 120777 root:root ../../../linuxcnc/modules/motmod.so +File: /usr/lib/debug/.build-id/92/3108d3d6d910f5e8a8d6643b99f46024ece1a4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/motmod.so.debug +File: /usr/lib/debug/.build-id/92/92bf459b25b706b9de96989afc052749878f87 120777 root:root ../../../linuxcnc/modules/conv_s32_bit.so +File: /usr/lib/debug/.build-id/92/92bf459b25b706b9de96989afc052749878f87.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_bit.so.debug File: /usr/lib/debug/.build-id/94 40755 root:root -File: /usr/lib/debug/.build-id/94/85ced31d30b9b0636bb5017ec56ea84b7d0ba3 120777 root:root ../../../../bin/linuxcncsvr -File: /usr/lib/debug/.build-id/94/85ced31d30b9b0636bb5017ec56ea84b7d0ba3.debug 120777 root:root ../../usr/bin/linuxcncsvr.debug +File: /usr/lib/debug/.build-id/94/64a39a78a21eeac22e39d3523aa0d588c71cda 120777 root:root ../../../../bin/tool_watch +File: /usr/lib/debug/.build-id/94/64a39a78a21eeac22e39d3523aa0d588c71cda.debug 120777 root:root ../../usr/bin/tool_watch.debug +File: /usr/lib/debug/.build-id/94/8d7c115162318dbb67743009c2964a356e227d 120777 root:root ../../../linuxcnc/modules/classicladder_rt.so +File: /usr/lib/debug/.build-id/94/8d7c115162318dbb67743009c2964a356e227d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/classicladder_rt.so.debug File: /usr/lib/debug/.build-id/95 40755 root:root -File: /usr/lib/debug/.build-id/95/23483bb1fdfa331ea03ea369e41f6adb678fae 120777 root:root ../../../linuxcnc/modules/edge.so -File: /usr/lib/debug/.build-id/95/23483bb1fdfa331ea03ea369e41f6adb678fae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/edge.so.debug File: /usr/lib/debug/.build-id/95/5f0ed1254d6b73ff6122504fce513128bafc23 120777 root:root ../../../linuxcnc/modules/tripodkins.so File: /usr/lib/debug/.build-id/95/5f0ed1254d6b73ff6122504fce513128bafc23.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tripodkins.so.debug +File: /usr/lib/debug/.build-id/95/ace6e8891728d0350879566cbb1d591c53eb89 120777 root:root ../../../../bin/xhc-hb04 +File: /usr/lib/debug/.build-id/95/ace6e8891728d0350879566cbb1d591c53eb89.debug 120777 root:root ../../usr/bin/xhc-hb04.debug File: /usr/lib/debug/.build-id/98 40755 root:root -File: /usr/lib/debug/.build-id/98/dee91691d580a5a25b429fe78c4ff519253128 120777 root:root ../../../linuxcnc/modules/ddt.so -File: /usr/lib/debug/.build-id/98/dee91691d580a5a25b429fe78c4ff519253128.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ddt.so.debug +File: /usr/lib/debug/.build-id/98/556231195458a83f67570955ebf7aedab49525 120777 root:root ../../../linuxcnc/modules/mult2.so +File: /usr/lib/debug/.build-id/98/556231195458a83f67570955ebf7aedab49525.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mult2.so.debug +File: /usr/lib/debug/.build-id/98/ee2b7b9941f255c749619bd86103dc9c5939f7 120777 root:root ../../../linuxcnc/modules/rotarydeltakins.so +File: /usr/lib/debug/.build-id/98/ee2b7b9941f255c749619bd86103dc9c5939f7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotarydeltakins.so.debug +File: /usr/lib/debug/.build-id/99 40755 root:root +File: /usr/lib/debug/.build-id/99/0073ce25276d301be1535b82c662b97721afda 120777 root:root ../../../linuxcnc/modules/ton.so +File: /usr/lib/debug/.build-id/99/0073ce25276d301be1535b82c662b97721afda.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ton.so.debug +File: /usr/lib/debug/.build-id/9a 40755 root:root +File: /usr/lib/debug/.build-id/9a/055372f198d5f436df04f11974f30a9e21563f 120777 root:root ../../../linuxcnc/modules/tp.so +File: /usr/lib/debug/.build-id/9a/055372f198d5f436df04f11974f30a9e21563f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tp.so.debug File: /usr/lib/debug/.build-id/9b 40755 root:root -File: /usr/lib/debug/.build-id/9b/04bae22c5e9cfc06886a823e9c4d00db6132f8 120777 root:root ../../../linuxcnc/modules/sim_matrix_kb.so -File: /usr/lib/debug/.build-id/9b/04bae22c5e9cfc06886a823e9c4d00db6132f8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_matrix_kb.so.debug +File: /usr/lib/debug/.build-id/9b/3f73762b5ee2b3904d45b52367c537cb82bdd6 120777 root:root ../../../../bin/halscope +File: /usr/lib/debug/.build-id/9b/3f73762b5ee2b3904d45b52367c537cb82bdd6.debug 120777 root:root ../../usr/bin/halscope.debug +File: /usr/lib/debug/.build-id/9b/b2bf7576b35a09cbdd1a7e32e31480c485ff8a 120777 root:root ../../../linuxcnc/modules/offset.so +File: /usr/lib/debug/.build-id/9b/b2bf7576b35a09cbdd1a7e32e31480c485ff8a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/offset.so.debug File: /usr/lib/debug/.build-id/9c 40755 root:root -File: /usr/lib/debug/.build-id/9c/2990ae169dbd6b2179cd4870129ec8660fa4fa 120777 root:root ../../../linuxcnc/modules/userkins.so -File: /usr/lib/debug/.build-id/9c/2990ae169dbd6b2179cd4870129ec8660fa4fa.debug 120777 root:root ../../usr/lib/linuxcnc/modules/userkins.so.debug -File: /usr/lib/debug/.build-id/9d 40755 root:root -File: /usr/lib/debug/.build-id/9d/c7238467775720b8839cd228cab0e1523da94a 120777 root:root ../../../../bin/io -File: /usr/lib/debug/.build-id/9d/c7238467775720b8839cd228cab0e1523da94a.debug 120777 root:root ../../usr/bin/io.debug -File: /usr/lib/debug/.build-id/9d/ceb1add5e10ef4f972bc76d75fcff1535567de 120777 root:root ../../../linuxcnc/modules/axistest.so -File: /usr/lib/debug/.build-id/9d/ceb1add5e10ef4f972bc76d75fcff1535567de.debug 120777 root:root ../../usr/lib/linuxcnc/modules/axistest.so.debug -File: /usr/lib/debug/.build-id/9e 40755 root:root -File: /usr/lib/debug/.build-id/9e/205a2a9f33db0633c1d0a352d435f54331ff26 120777 root:root ../../../linuxcnc/modules/or2.so -File: /usr/lib/debug/.build-id/9e/205a2a9f33db0633c1d0a352d435f54331ff26.debug 120777 root:root ../../usr/lib/linuxcnc/modules/or2.so.debug +File: /usr/lib/debug/.build-id/9c/5251cb065244ad4cec5843b68bb842b9d70dca 120777 root:root ../../../linuxcnc/modules/hal_lib.so +File: /usr/lib/debug/.build-id/9c/5251cb065244ad4cec5843b68bb842b9d70dca.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_lib.so.debug +File: /usr/lib/debug/.build-id/9c/7eb2bff9c48ba12c41f32c6fc7b7f1707f3631 120777 root:root ../../../linuxcnc/modules/xhc_hb04_util.so +File: /usr/lib/debug/.build-id/9c/7eb2bff9c48ba12c41f32c6fc7b7f1707f3631.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xhc_hb04_util.so.debug File: /usr/lib/debug/.build-id/9f 40755 root:root -File: /usr/lib/debug/.build-id/9f/e0485acfdc9a1aebb1585a10749812d4e94629 120777 root:root ../../../linuxcnc/modules/hm2_7i90.so -File: /usr/lib/debug/.build-id/9f/e0485acfdc9a1aebb1585a10749812d4e94629.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i90.so.debug -File: /usr/lib/debug/.build-id/9f/efb9bd8b69ed1fd5511ddae1fb85d83c4e5a2c 120777 root:root ../../../linuxcnc/modules/minmax.so -File: /usr/lib/debug/.build-id/9f/efb9bd8b69ed1fd5511ddae1fb85d83c4e5a2c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/minmax.so.debug -File: /usr/lib/debug/.build-id/a1 40755 root:root -File: /usr/lib/debug/.build-id/a1/1e0c4d0212f7d080ccb16863323ba1c7498767 120777 root:root ../../../linuxcnc/modules/feedcomp.so -File: /usr/lib/debug/.build-id/a1/1e0c4d0212f7d080ccb16863323ba1c7498767.debug 120777 root:root ../../usr/lib/linuxcnc/modules/feedcomp.so.debug -File: /usr/lib/debug/.build-id/a1/5f6237e525484e59a0fca9c99127f5cb491455 120777 root:root ../../../../bin/tool_watch -File: /usr/lib/debug/.build-id/a1/5f6237e525484e59a0fca9c99127f5cb491455.debug 120777 root:root ../../usr/bin/tool_watch.debug +File: /usr/lib/debug/.build-id/9f/d9491efd9b6d5fa7eaf45df814fbce9bbda8a9 120777 root:root ../../../../bin/vfdb_vfd +File: /usr/lib/debug/.build-id/9f/d9491efd9b6d5fa7eaf45df814fbce9bbda8a9.debug 120777 root:root ../../usr/bin/vfdb_vfd.debug File: /usr/lib/debug/.build-id/a3 40755 root:root -File: /usr/lib/debug/.build-id/a3/b928cf540b30e5404f77a0edd7fd8416d4aab0 120777 root:root ../../../linuxcnc/modules/mesa_uart.so -File: /usr/lib/debug/.build-id/a3/b928cf540b30e5404f77a0edd7fd8416d4aab0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_uart.so.debug +File: /usr/lib/debug/.build-id/a3/2689352db7571117adf46c79321a42f368cd59 120777 root:root ../../../linuxcnc/modules/genhexkins.so +File: /usr/lib/debug/.build-id/a3/2689352db7571117adf46c79321a42f368cd59.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genhexkins.so.debug +File: /usr/lib/debug/.build-id/a3/948698d6ee384fcf3ca03023dce59f062834c6 120777 root:root ../../../linuxcnc/modules/conv_s32_u32.so +File: /usr/lib/debug/.build-id/a3/948698d6ee384fcf3ca03023dce59f062834c6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_s32_u32.so.debug +File: /usr/lib/debug/.build-id/a3/9488b4dc13ee19b094274533f87629de9103d0 120777 root:root ../../../linuxcnc/modules/setsserial.so +File: /usr/lib/debug/.build-id/a3/9488b4dc13ee19b094274533f87629de9103d0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/setsserial.so.debug File: /usr/lib/debug/.build-id/a4 40755 root:root -File: /usr/lib/debug/.build-id/a4/cc843d551e9a08240552e183c1847a66cdf02f 120777 root:root ../../../linuxcnc/modules/conv_bit_s32.so -File: /usr/lib/debug/.build-id/a4/cc843d551e9a08240552e183c1847a66cdf02f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_s32.so.debug +File: /usr/lib/debug/.build-id/a4/6fa7a409560be2ceed3dccdefb0c799b3baf5a 120777 root:root ../../../linuxcnc/modules/bldc.so +File: /usr/lib/debug/.build-id/a4/6fa7a409560be2ceed3dccdefb0c799b3baf5a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bldc.so.debug +File: /usr/lib/debug/.build-id/a4/bb35b7b291fac971903718593e712f5a4b426a 120777 root:root ../../../../bin/inivar +File: /usr/lib/debug/.build-id/a4/bb35b7b291fac971903718593e712f5a4b426a.debug 120777 root:root ../../usr/bin/inivar.debug +File: /usr/lib/debug/.build-id/a4/dc4e6d468b12792b0e36c4720ac9d12d5fcfcd 120777 root:root ../../../python3/site-packages/_togl.so +File: /usr/lib/debug/.build-id/a4/dc4e6d468b12792b0e36c4720ac9d12d5fcfcd.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug File: /usr/lib/debug/.build-id/a5 40755 root:root -File: /usr/lib/debug/.build-id/a5/da0204f8211c2cc7674c6c5d5fbf37080276dd 120777 root:root ../../../python3/site-packages/linuxcnc.so -File: /usr/lib/debug/.build-id/a5/da0204f8211c2cc7674c6c5d5fbf37080276dd.debug 120777 root:root ../../usr/lib/python3/site-packages/linuxcnc.so.debug +File: /usr/lib/debug/.build-id/a5/a95f66c7cadb57cfb10c5fe627729eba606e99 120777 root:root ../../../linuxcnc/modules/sample_hold.so +File: /usr/lib/debug/.build-id/a5/a95f66c7cadb57cfb10c5fe627729eba606e99.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sample_hold.so.debug File: /usr/lib/debug/.build-id/a6 40755 root:root -File: /usr/lib/debug/.build-id/a6/336140f774f725f3caf8327833b9f52977747f 120777 root:root ../../../linuxcnc/modules/clarke3.so -File: /usr/lib/debug/.build-id/a6/336140f774f725f3caf8327833b9f52977747f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke3.so.debug +File: /usr/lib/debug/.build-id/a6/37922b249449450da6002800f42ecbaa810e0e 120777 root:root ../../../linuxcnc/modules/thcud.so +File: /usr/lib/debug/.build-id/a6/37922b249449450da6002800f42ecbaa810e0e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thcud.so.debug +File: /usr/lib/debug/.build-id/a6/bd13d76d56bbec7e53f5c306a5836d06b2569a 120777 root:root ../../../../bin/panelui +File: /usr/lib/debug/.build-id/a6/bd13d76d56bbec7e53f5c306a5836d06b2569a.debug 120777 root:root ../../usr/bin/panelui.debug File: /usr/lib/debug/.build-id/a7 40755 root:root -File: /usr/lib/debug/.build-id/a7/21cba731799409897833c2061c6a932c03ce7a 120777 root:root ../../../linuxcnc/modules/sim_encoder.so -File: /usr/lib/debug/.build-id/a7/21cba731799409897833c2061c6a932c03ce7a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_encoder.so.debug +File: /usr/lib/debug/.build-id/a7/44f19805db4e31784e4460a35197679d93c638 120777 root:root ../../../python3/site-packages/rotarydeltakins.so +File: /usr/lib/debug/.build-id/a7/44f19805db4e31784e4460a35197679d93c638.debug 120777 root:root ../../usr/lib/python3/site-packages/rotarydeltakins.so.debug +File: /usr/lib/debug/.build-id/a7/d1af1dda16c2dd15f3b56233837af3dc30bb43 120777 root:root ../../../linuxcnc/modules/timedelta.so +File: /usr/lib/debug/.build-id/a7/d1af1dda16c2dd15f3b56233837af3dc30bb43.debug 120777 root:root ../../usr/lib/linuxcnc/modules/timedelta.so.debug File: /usr/lib/debug/.build-id/a8 40755 root:root +File: /usr/lib/debug/.build-id/a8/0cbbca82c587bc5cec50fd32a7da34889db54a 120777 root:root ../../../linuxcnc/modules/feedcomp.so +File: /usr/lib/debug/.build-id/a8/0cbbca82c587bc5cec50fd32a7da34889db54a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/feedcomp.so.debug File: /usr/lib/debug/.build-id/a8/3f794bad5dd6ebd6ffd994b88583cfb8492e9c 120777 root:root ../../../linuxcnc/modules/threads.so File: /usr/lib/debug/.build-id/a8/3f794bad5dd6ebd6ffd994b88583cfb8492e9c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/threads.so.debug -File: /usr/lib/debug/.build-id/a8/501fc6952c2692a06a09e50d16286e0f2be69b 120777 root:root ../../../linuxcnc/modules/conv_u32_s32.so -File: /usr/lib/debug/.build-id/a8/501fc6952c2692a06a09e50d16286e0f2be69b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_s32.so.debug File: /usr/lib/debug/.build-id/a9 40755 root:root -File: /usr/lib/debug/.build-id/a9/99350747cd7beb0df928f93a8c0657c6f94058 120777 root:root ../../../linuxcnc/modules/xyzbc-trt-kins.so -File: /usr/lib/debug/.build-id/a9/99350747cd7beb0df928f93a8c0657c6f94058.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzbc-trt-kins.so.debug +File: /usr/lib/debug/.build-id/a9/4bcc8bd8b74ba0e351e3809778c150a040cf52 120777 root:root ../../../linuxcnc/modules/hm2_pci.so +File: /usr/lib/debug/.build-id/a9/4bcc8bd8b74ba0e351e3809778c150a040cf52.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_pci.so.debug File: /usr/lib/debug/.build-id/aa 40755 root:root -File: /usr/lib/debug/.build-id/aa/b7cf8669cfbf918bc0568e71b6c2a6c594547a 120777 root:root ../../../linuxcnc/modules/hm2_rpspi.so -File: /usr/lib/debug/.build-id/aa/b7cf8669cfbf918bc0568e71b6c2a6c594547a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_rpspi.so.debug +File: /usr/lib/debug/.build-id/aa/e4fe34225f9b939377d50f94d571cbf20226e2 120777 root:root ../../../linuxcnc/modules/logic.so +File: /usr/lib/debug/.build-id/aa/e4fe34225f9b939377d50f94d571cbf20226e2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/logic.so.debug File: /usr/lib/debug/.build-id/ab 40755 root:root -File: /usr/lib/debug/.build-id/ab/0783659d8555eb8363d240155f5e353a10bc7d 120777 root:root ../../../../bin/halscope -File: /usr/lib/debug/.build-id/ab/0783659d8555eb8363d240155f5e353a10bc7d.debug 120777 root:root ../../usr/bin/halscope.debug +File: /usr/lib/debug/.build-id/ab/2a7d0fd211d0c44a0ff2ca002ed29c36bcaf99 120777 root:root ../../../../bin/svd-ps_vfd +File: /usr/lib/debug/.build-id/ab/2a7d0fd211d0c44a0ff2ca002ed29c36bcaf99.debug 120777 root:root ../../usr/bin/svd-ps_vfd.debug +File: /usr/lib/debug/.build-id/ab/e45009857724248eae7b1381e166a18c311797 120777 root:root ../../../../bin/halstreamer +File: /usr/lib/debug/.build-id/ab/e45009857724248eae7b1381e166a18c311797.debug 120777 root:root ../../usr/bin/halstreamer.debug File: /usr/lib/debug/.build-id/ac 40755 root:root -File: /usr/lib/debug/.build-id/ac/b14898c2d53aa5b236adbdbd22ba60dad133e7 120777 root:root ../../../../bin/halsampler -File: /usr/lib/debug/.build-id/ac/b14898c2d53aa5b236adbdbd22ba60dad133e7.debug 120777 root:root ../../usr/bin/halsampler.debug -File: /usr/lib/debug/.build-id/ac/fcbbbd7db93a8b1a018701021770a708eed704 120777 root:root ../../../linuxcnc/modules/conv_u32_bit.so -File: /usr/lib/debug/.build-id/ac/fcbbbd7db93a8b1a018701021770a708eed704.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_bit.so.debug +File: /usr/lib/debug/.build-id/ac/1f52e6b26db2f8641edd0390c0936bb04df8f8 120777 root:root ../../../../bin/linuxcncrsh +File: /usr/lib/debug/.build-id/ac/1f52e6b26db2f8641edd0390c0936bb04df8f8.debug 120777 root:root ../../usr/bin/linuxcncrsh.debug +File: /usr/lib/debug/.build-id/ad 40755 root:root +File: /usr/lib/debug/.build-id/ad/9b1f085dafb5b255216d0248cd0f2c42efe0a7 120777 root:root ../../../linuxcnc/modules/ddt.so +File: /usr/lib/debug/.build-id/ad/9b1f085dafb5b255216d0248cd0f2c42efe0a7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ddt.so.debug File: /usr/lib/debug/.build-id/ae 40755 root:root -File: /usr/lib/debug/.build-id/ae/f34117f1a5ab109cbd8c7fe29e3f8cd8da9bb1 120777 root:root ../../../linuxcnc/modules/mux16.so -File: /usr/lib/debug/.build-id/ae/f34117f1a5ab109cbd8c7fe29e3f8cd8da9bb1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mux16.so.debug -File: /usr/lib/debug/.build-id/af 40755 root:root -File: /usr/lib/debug/.build-id/af/26c682c64a20619e5b8ed52825cc7e775f92f3 120777 root:root ../../../linuxcnc/modules/oneshot.so -File: /usr/lib/debug/.build-id/af/26c682c64a20619e5b8ed52825cc7e775f92f3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/oneshot.so.debug -File: /usr/lib/debug/.build-id/af/e97011dd16c965c288bfb897afa231bba7ec4f 120777 root:root ../../../linuxcnc/modules/modmath.so -File: /usr/lib/debug/.build-id/af/e97011dd16c965c288bfb897afa231bba7ec4f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/modmath.so.debug +File: /usr/lib/debug/.build-id/ae/d859e4f4f10c5449ee0e930f201fba999e034a 120777 root:root ../../../linuxcnc/modules/userkins.so +File: /usr/lib/debug/.build-id/ae/d859e4f4f10c5449ee0e930f201fba999e034a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/userkins.so.debug File: /usr/lib/debug/.build-id/b0 40755 root:root -File: /usr/lib/debug/.build-id/b0/5a7a06d60e1679e1c7de628c0eb13e478dbc3a 120777 root:root ../../../../bin/hy_gt_vfd -File: /usr/lib/debug/.build-id/b0/5a7a06d60e1679e1c7de628c0eb13e478dbc3a.debug 120777 root:root ../../usr/bin/hy_gt_vfd.debug -File: /usr/lib/debug/.build-id/b0/f9201f1844da3a3b8cbed691f714a5e41a9694 120777 root:root ../../../linuxcnc/modules/setsserial.so -File: /usr/lib/debug/.build-id/b0/f9201f1844da3a3b8cbed691f714a5e41a9694.debug 120777 root:root ../../usr/lib/linuxcnc/modules/setsserial.so.debug +File: /usr/lib/debug/.build-id/b0/158d45cfcaf7c58006fb246fb01b0f09934da4 120777 root:root ../../../linuxcnc/modules/hal_bb_gpio.so +File: /usr/lib/debug/.build-id/b0/158d45cfcaf7c58006fb246fb01b0f09934da4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_bb_gpio.so.debug File: /usr/lib/debug/.build-id/b1 40755 root:root -File: /usr/lib/debug/.build-id/b1/b10189b596dde02493c55a8e2637be494677a1 120777 root:root ../../../linuxcnc/modules/integ.so -File: /usr/lib/debug/.build-id/b1/b10189b596dde02493c55a8e2637be494677a1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/integ.so.debug -File: /usr/lib/debug/.build-id/b1/b86e24ec614c6e2effeb88d44af16700cd89af 120777 root:root ../../../linuxcnc/modules/sphereprobe.so -File: /usr/lib/debug/.build-id/b1/b86e24ec614c6e2effeb88d44af16700cd89af.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sphereprobe.so.debug -File: /usr/lib/debug/.build-id/b2 40755 root:root -File: /usr/lib/debug/.build-id/b2/571b662650a400524881063d93b46f98b26df1 120777 root:root ../../../linuxcnc/modules/hm2_7i43.so -File: /usr/lib/debug/.build-id/b2/571b662650a400524881063d93b46f98b26df1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i43.so.debug +File: /usr/lib/debug/.build-id/b1/a904e9f1867791722ab82e834cfca00c1a45de 120777 root:root ../../../linuxcnc/modules/encoder.so +File: /usr/lib/debug/.build-id/b1/a904e9f1867791722ab82e834cfca00c1a45de.debug 120777 root:root ../../usr/lib/linuxcnc/modules/encoder.so.debug File: /usr/lib/debug/.build-id/b4 40755 root:root -File: /usr/lib/debug/.build-id/b4/dd1b26403f3c6913e2a8c34c1004c3a445f7da 120777 root:root ../../../linuxcnc/modules/latencybins.so -File: /usr/lib/debug/.build-id/b4/dd1b26403f3c6913e2a8c34c1004c3a445f7da.debug 120777 root:root ../../usr/lib/linuxcnc/modules/latencybins.so.debug -File: /usr/lib/debug/.build-id/b5 40755 root:root -File: /usr/lib/debug/.build-id/b5/b111fdef6a77660345ad58f606fced8216e926 120777 root:root ../../../linuxcnc/modules/tristate_bit.so -File: /usr/lib/debug/.build-id/b5/b111fdef6a77660345ad58f606fced8216e926.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_bit.so.debug +File: /usr/lib/debug/.build-id/b4/7b0d55a1a27fce2e48c44fc5b14c49b7df22b3 120777 root:root ../../../linuxcnc/modules/tristate_float.so +File: /usr/lib/debug/.build-id/b4/7b0d55a1a27fce2e48c44fc5b14c49b7df22b3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tristate_float.so.debug +File: /usr/lib/debug/.build-id/b6 40755 root:root +File: /usr/lib/debug/.build-id/b6/46efd1ddb2c0c328b27ff0e20fb9262e369a2c 120777 root:root ../../../../bin/halui +File: /usr/lib/debug/.build-id/b6/46efd1ddb2c0c328b27ff0e20fb9262e369a2c.debug 120777 root:root ../../usr/bin/halui.debug File: /usr/lib/debug/.build-id/b7 40755 root:root -File: /usr/lib/debug/.build-id/b7/7ecbc2c9f5faf727e50279a62def432884b3ea 120777 root:root ../../../linuxcnc/modules/multiswitch.so -File: /usr/lib/debug/.build-id/b7/7ecbc2c9f5faf727e50279a62def432884b3ea.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiswitch.so.debug -File: /usr/lib/debug/.build-id/b8 40755 root:root -File: /usr/lib/debug/.build-id/b8/8302481ba043349f916cde309dcba0f7f71326 120777 root:root ../../../linuxcnc/modules/sim_parport.so -File: /usr/lib/debug/.build-id/b8/8302481ba043349f916cde309dcba0f7f71326.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_parport.so.debug -File: /usr/lib/debug/.build-id/b8/94c4f8a97acb474d9082e403b74f2eebea1584 120777 root:root ../../../linuxcnc/modules/sum2.so -File: /usr/lib/debug/.build-id/b8/94c4f8a97acb474d9082e403b74f2eebea1584.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sum2.so.debug -File: /usr/lib/debug/.build-id/b8/a51b4f1f19480978737a2ee6c14c1ee0740b79 120777 root:root ../../../../bin/halui -File: /usr/lib/debug/.build-id/b8/a51b4f1f19480978737a2ee6c14c1ee0740b79.debug 120777 root:root ../../usr/bin/halui.debug +File: /usr/lib/debug/.build-id/b7/553c2678877dd950b17a1e5e1f7cfafe4050b6 120777 root:root ../../../linuxcnc/modules/charge_pump.so +File: /usr/lib/debug/.build-id/b7/553c2678877dd950b17a1e5e1f7cfafe4050b6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/charge_pump.so.debug File: /usr/lib/debug/.build-id/b9 40755 root:root -File: /usr/lib/debug/.build-id/b9/0eb10650d083b4900cc20975db04f138275174 120777 root:root ../../../linuxcnc/modules/toggle2nist.so -File: /usr/lib/debug/.build-id/b9/0eb10650d083b4900cc20975db04f138275174.debug 120777 root:root ../../usr/lib/linuxcnc/modules/toggle2nist.so.debug -File: /usr/lib/debug/.build-id/b9/72dd0b3ade3b977e7d925ef0b7db603a87ee7c 120777 root:root ../../../linuxcnc/modules/sim_spindle.so -File: /usr/lib/debug/.build-id/b9/72dd0b3ade3b977e7d925ef0b7db603a87ee7c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_spindle.so.debug File: /usr/lib/debug/.build-id/b9/79bbe1708733d4cfe3c083aa71ea1cc180fa14 120777 root:root ../../../linuxcnc/modules/pwmgen.so File: /usr/lib/debug/.build-id/b9/79bbe1708733d4cfe3c083aa71ea1cc180fa14.debug 120777 root:root ../../usr/lib/linuxcnc/modules/pwmgen.so.debug -File: /usr/lib/debug/.build-id/bb 40755 root:root -File: /usr/lib/debug/.build-id/bb/a0021c3e410a9700337320f104b9bc38857fa0 120777 root:root ../../../../bin/gs2_vfd -File: /usr/lib/debug/.build-id/bb/a0021c3e410a9700337320f104b9bc38857fa0.debug 120777 root:root ../../usr/bin/gs2_vfd.debug +File: /usr/lib/debug/.build-id/ba 40755 root:root +File: /usr/lib/debug/.build-id/ba/86aa7cde6aa0470c0ee44ac46e5c4fcae71ae3 120777 root:root ../../../linuxcnc/modules/hm2_7i43.so +File: /usr/lib/debug/.build-id/ba/86aa7cde6aa0470c0ee44ac46e5c4fcae71ae3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_7i43.so.debug +File: /usr/lib/debug/.build-id/ba/c0847bf4880c7fe97fb87234b933cb6905f1f4 120777 root:root ../../../../bin/xhc-whb04b-6 +File: /usr/lib/debug/.build-id/ba/c0847bf4880c7fe97fb87234b933cb6905f1f4.debug 120777 root:root ../../usr/bin/xhc-whb04b-6.debug +File: /usr/lib/debug/.build-id/ba/c1698b66cde8bc075eed6759bec88fe42d6107 120777 root:root ../../../linuxcnc/modules/streamer.so +File: /usr/lib/debug/.build-id/ba/c1698b66cde8bc075eed6759bec88fe42d6107.debug 120777 root:root ../../usr/lib/linuxcnc/modules/streamer.so.debug File: /usr/lib/debug/.build-id/bc 40755 root:root -File: /usr/lib/debug/.build-id/bc/2a1851e033798e37b3b3cae8a2dff121461644 120777 root:root ../../../../bin/shuttle -File: /usr/lib/debug/.build-id/bc/2a1851e033798e37b3b3cae8a2dff121461644.debug 120777 root:root ../../usr/bin/shuttle.debug -File: /usr/lib/debug/.build-id/bc/ba17b5c3b5f26d1a6d7328c2b858dbc2aa51a0 120777 root:root ../../../../bin/linuxcncrsh -File: /usr/lib/debug/.build-id/bc/ba17b5c3b5f26d1a6d7328c2b858dbc2aa51a0.debug 120777 root:root ../../usr/bin/linuxcncrsh.debug -File: /usr/lib/debug/.build-id/bc/db0ff2daf5a71f2067a15cdea750a46f6d15d1 120777 root:root ../../../python3/site-packages/lineardeltakins.so -File: /usr/lib/debug/.build-id/bc/db0ff2daf5a71f2067a15cdea750a46f6d15d1.debug 120777 root:root ../../usr/lib/python3/site-packages/lineardeltakins.so.debug +File: /usr/lib/debug/.build-id/bc/2e25d70c459f20e468af7a062b5592dc445ce6 120777 root:root ../../../linuxcnc/modules/ilowpass.so +File: /usr/lib/debug/.build-id/bc/2e25d70c459f20e468af7a062b5592dc445ce6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/ilowpass.so.debug +File: /usr/lib/debug/.build-id/bc/5e64cd11f892d5bba7894bbfe1fbd006126832 120777 root:root ../../../../bin/halsampler +File: /usr/lib/debug/.build-id/bc/5e64cd11f892d5bba7894bbfe1fbd006126832.debug 120777 root:root ../../usr/bin/halsampler.debug File: /usr/lib/debug/.build-id/bd 40755 root:root -File: /usr/lib/debug/.build-id/bd/76e8de97a91bdf3bc52b765dcbb17b2e308b01 120777 root:root ../../../linuxcnc/modules/xyzac-trt-kins.so -File: /usr/lib/debug/.build-id/bd/76e8de97a91bdf3bc52b765dcbb17b2e308b01.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzac-trt-kins.so.debug -File: /usr/lib/debug/.build-id/bd/8600910e8b7a34a538a72903565e2b2091eeed 120777 root:root ../../../../bin/inivar -File: /usr/lib/debug/.build-id/bd/8600910e8b7a34a538a72903565e2b2091eeed.debug 120777 root:root ../../usr/bin/inivar.debug +File: /usr/lib/debug/.build-id/bd/087a6896cc3c83a0fd05b72fd9b7dda0a720c0 120777 root:root ../../../linuxcnc/modules/sim_matrix_kb.so +File: /usr/lib/debug/.build-id/bd/087a6896cc3c83a0fd05b72fd9b7dda0a720c0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_matrix_kb.so.debug +File: /usr/lib/debug/.build-id/bd/e291bb2463be9f96676b552ca62335ecd68ccb 120777 root:root ../../../linuxcnc/modules/spindle.so +File: /usr/lib/debug/.build-id/bd/e291bb2463be9f96676b552ca62335ecd68ccb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/spindle.so.debug File: /usr/lib/debug/.build-id/be 40755 root:root +File: /usr/lib/debug/.build-id/be/013648c95e6c027c20d1845499ea0c72cb4f97 120777 root:root ../../../linuxcnc/modules/biquad.so +File: /usr/lib/debug/.build-id/be/013648c95e6c027c20d1845499ea0c72cb4f97.debug 120777 root:root ../../usr/lib/linuxcnc/modules/biquad.so.debug File: /usr/lib/debug/.build-id/be/0d3cfe37b86c5d635814293ae86dab8a6eb212 120777 root:root ../../../linuxcnc/modules/matrix_kb.so File: /usr/lib/debug/.build-id/be/0d3cfe37b86c5d635814293ae86dab8a6eb212.debug 120777 root:root ../../usr/lib/linuxcnc/modules/matrix_kb.so.debug -File: /usr/lib/debug/.build-id/be/8bd0ca885b4e2437cbbb34c65fde2a796d1278 120777 root:root ../../../linuxcnc/modules/xhc_hb04_util.so -File: /usr/lib/debug/.build-id/be/8bd0ca885b4e2437cbbb34c65fde2a796d1278.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xhc_hb04_util.so.debug File: /usr/lib/debug/.build-id/bf 40755 root:root @@ -2005,92 +1968,105 @@ File: /usr/lib/debug/.build-id/bf/02301e32e772d386c8a4be816bfc3c4e231df2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lineardeltakins.so.debug -File: /usr/lib/debug/.build-id/bf/245281b16d873da095b848053c62a9422485a2 120777 root:root ../../../linuxcnc/modules/enum.so -File: /usr/lib/debug/.build-id/bf/245281b16d873da095b848053c62a9422485a2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/enum.so.debug File: /usr/lib/debug/.build-id/c0 40755 root:root -File: /usr/lib/debug/.build-id/c0/bb8b60bf87ef0cc95a4db690bd5c83a3c95727 120777 root:root ../../../../bin/halstreamer -File: /usr/lib/debug/.build-id/c0/bb8b60bf87ef0cc95a4db690bd5c83a3c95727.debug 120777 root:root ../../usr/bin/halstreamer.debug +File: /usr/lib/debug/.build-id/c0/7b0fc450ada807f5aa6ac7a4d82440ed456523 120777 root:root ../../../../bin/schedrmt +File: /usr/lib/debug/.build-id/c0/7b0fc450ada807f5aa6ac7a4d82440ed456523.debug 120777 root:root ../../usr/bin/schedrmt.debug File: /usr/lib/debug/.build-id/c2 40755 root:root -File: /usr/lib/debug/.build-id/c2/30afc0e7174971f04c98f0ed8a4c9918e173a7 120777 root:root ../../../linuxcnc/modules/hm2_eth.so -File: /usr/lib/debug/.build-id/c2/30afc0e7174971f04c98f0ed8a4c9918e173a7.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_eth.so.debug -File: /usr/lib/debug/.build-id/c2/9969b305b2b28c1723a122a05bde67febafe71 120777 root:root ../../../linuxcnc/modules/max31855.so -File: /usr/lib/debug/.build-id/c2/9969b305b2b28c1723a122a05bde67febafe71.debug 120777 root:root ../../usr/lib/linuxcnc/modules/max31855.so.debug -File: /usr/lib/debug/.build-id/c5 40755 root:root -File: /usr/lib/debug/.build-id/c5/c9889457c4d1543a53e0bbd4dd1b17ba43db04 120777 root:root ../../../linuxcnc/modules/invert.so -File: /usr/lib/debug/.build-id/c5/c9889457c4d1543a53e0bbd4dd1b17ba43db04.debug 120777 root:root ../../usr/lib/linuxcnc/modules/invert.so.debug -File: /usr/lib/debug/.build-id/c8 40755 root:root -File: /usr/lib/debug/.build-id/c8/07a0472c77034b771661e4f98dc3ae56db32ae 120777 root:root ../../../linuxcnc/modules/hm2_spi.so -File: /usr/lib/debug/.build-id/c8/07a0472c77034b771661e4f98dc3ae56db32ae.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_spi.so.debug +File: /usr/lib/debug/.build-id/c2/eab404e0d38ef084df2209b2a28fe49d115c97 120777 root:root ../../../../bin/io +File: /usr/lib/debug/.build-id/c2/eab404e0d38ef084df2209b2a28fe49d115c97.debug 120777 root:root ../../usr/bin/io.debug +File: /usr/lib/debug/.build-id/c3 40755 root:root +File: /usr/lib/debug/.build-id/c3/ad0dd13acd5c4024a4f2d1c86c3662073fdb81 120777 root:root ../../../tcl/linuxcnc/linuxcnc.so +File: /usr/lib/debug/.build-id/c3/ad0dd13acd5c4024a4f2d1c86c3662073fdb81.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/linuxcnc.so.debug +File: /usr/lib/debug/.build-id/c6 40755 root:root +File: /usr/lib/debug/.build-id/c6/5cb7cd56bfe79f0b923987520bed68c535b886 120777 root:root ../../../linuxcnc/modules/modmath.so +File: /usr/lib/debug/.build-id/c6/5cb7cd56bfe79f0b923987520bed68c535b886.debug 120777 root:root ../../usr/lib/linuxcnc/modules/modmath.so.debug +File: /usr/lib/debug/.build-id/c6/b0454d9ff89565bc61625cf6056432046b75ad 120777 root:root ../../../linuxcnc/modules/trivkins.so +File: /usr/lib/debug/.build-id/c6/b0454d9ff89565bc61625cf6056432046b75ad.debug 120777 root:root ../../usr/lib/linuxcnc/modules/trivkins.so.debug File: /usr/lib/debug/.build-id/c9 40755 root:root -File: /usr/lib/debug/.build-id/c9/5ae3a4f72c8fe2acba7f6e17249fafbfec3bb1 120777 root:root ../../../linuxcnc/modules/hostmot2.so -File: /usr/lib/debug/.build-id/c9/5ae3a4f72c8fe2acba7f6e17249fafbfec3bb1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hostmot2.so.debug -File: /usr/lib/debug/.build-id/c9/6e019cef1a8f3c2180af1151c9ef7481f7646f 120777 root:root ../../../linuxcnc/modules/xor2.so -File: /usr/lib/debug/.build-id/c9/6e019cef1a8f3c2180af1151c9ef7481f7646f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xor2.so.debug +File: /usr/lib/debug/.build-id/c9/3ab303c8debdda13f730266cc82881905e0855 120777 root:root ../../../../bin/rs274 +File: /usr/lib/debug/.build-id/c9/3ab303c8debdda13f730266cc82881905e0855.debug 120777 root:root ../../usr/bin/rs274.debug +File: /usr/lib/debug/.build-id/c9/75ee596b015f3b7d47ba7401896989da6967fb 120777 root:root ../../../linuxcnc/modules/conv_u32_bit.so +File: /usr/lib/debug/.build-id/c9/75ee596b015f3b7d47ba7401896989da6967fb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_bit.so.debug +File: /usr/lib/debug/.build-id/ca 40755 root:root +File: /usr/lib/debug/.build-id/ca/b79a39238e619928ddc057ce44ca6a9cbc90bd 120777 root:root ../../../linuxcnc/modules/siggen.so +File: /usr/lib/debug/.build-id/ca/b79a39238e619928ddc057ce44ca6a9cbc90bd.debug 120777 root:root ../../usr/lib/linuxcnc/modules/siggen.so.debug +File: /usr/lib/debug/.build-id/ca/dc0173d20aaa1b7d839eb7fd876518fca1b3c5 120777 root:root ../../../linuxcnc/modules/carousel.so +File: /usr/lib/debug/.build-id/ca/dc0173d20aaa1b7d839eb7fd876518fca1b3c5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/carousel.so.debug File: /usr/lib/debug/.build-id/cc 40755 root:root -File: /usr/lib/debug/.build-id/cc/67fa7c566d33ed66f44ac2747fa86ce10508fc 120777 root:root ../../../linuxcnc/modules/maj3.so -File: /usr/lib/debug/.build-id/cc/67fa7c566d33ed66f44ac2747fa86ce10508fc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/maj3.so.debug -File: /usr/lib/debug/.build-id/cd 40755 root:root -File: /usr/lib/debug/.build-id/cd/755b20c101ae585a3c5da19fd21b73da969fbf 120777 root:root ../../../../bin/hy_vfd -File: /usr/lib/debug/.build-id/cd/755b20c101ae585a3c5da19fd21b73da969fbf.debug 120777 root:root ../../usr/bin/hy_vfd.debug -File: /usr/lib/debug/.build-id/cd/c6876945799518404ff33430ff0f7037acddc2 120777 root:root ../../../python3/site-packages/_togl.so -File: /usr/lib/debug/.build-id/cd/c6876945799518404ff33430ff0f7037acddc2.debug 120777 root:root ../../usr/lib/python3/site-packages/_togl.so.debug +File: /usr/lib/debug/.build-id/cc/5c96fb11e0cc2dae8b2cd83be16efad7c0f6e8 120777 root:root ../../../linuxcnc/modules/hal_speaker.so +File: /usr/lib/debug/.build-id/cc/5c96fb11e0cc2dae8b2cd83be16efad7c0f6e8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_speaker.so.debug +File: /usr/lib/debug/.build-id/cc/b218bb5e012d583d7d8fd2e9c46e8a3a12d3be 120777 root:root ../../../linuxcnc/modules/thc.so +File: /usr/lib/debug/.build-id/cc/b218bb5e012d583d7d8fd2e9c46e8a3a12d3be.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thc.so.debug File: /usr/lib/debug/.build-id/ce 40755 root:root -File: /usr/lib/debug/.build-id/ce/431737d2e322415939cb6bfebb0bc9f98ff9f1 120777 root:root ../../../linuxcnc/modules/hal_pi_gpio.so -File: /usr/lib/debug/.build-id/ce/431737d2e322415939cb6bfebb0bc9f98ff9f1.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_pi_gpio.so.debug -File: /usr/lib/debug/.build-id/ce/6c10cda6a923a720b9639358edcf9beb98ea8c 120777 root:root ../../../linuxcnc/modules/serport.so -File: /usr/lib/debug/.build-id/ce/6c10cda6a923a720b9639358edcf9beb98ea8c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/serport.so.debug File: /usr/lib/debug/.build-id/ce/cc40caa69a73050d943f6db6d388e68e03dd72 120777 root:root ../../../linuxcnc/modules/corexykins.so File: /usr/lib/debug/.build-id/ce/cc40caa69a73050d943f6db6d388e68e03dd72.debug 120777 root:root ../../usr/lib/linuxcnc/modules/corexykins.so.debug -File: /usr/lib/debug/.build-id/ce/d25ca1aa16fa58b5e69479594c89f1d06131a4 120777 root:root ../../../linuxcnc/modules/gray2bin.so -File: /usr/lib/debug/.build-id/ce/d25ca1aa16fa58b5e69479594c89f1d06131a4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gray2bin.so.debug +File: /usr/lib/debug/.build-id/cf 40755 root:root +File: /usr/lib/debug/.build-id/cf/2450c605f790efe661a4b686081a004937b397 120777 root:root ../../../linuxcnc/modules/scope_rt.so +File: /usr/lib/debug/.build-id/cf/2450c605f790efe661a4b686081a004937b397.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scope_rt.so.debug +File: /usr/lib/debug/.build-id/d0 40755 root:root +File: /usr/lib/debug/.build-id/d0/0e7455e04558a99d192794de3db85eb592039e 120777 root:root ../../../linuxcnc/modules/bitwise.so +File: /usr/lib/debug/.build-id/d0/0e7455e04558a99d192794de3db85eb592039e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitwise.so.debug +File: /usr/lib/debug/.build-id/d1 40755 root:root +File: /usr/lib/debug/.build-id/d1/0ae9cb113e7585209b25ddc3f0b2cb887f1c19 120777 root:root ../../../linuxcnc/modules/hm2_eth.so +File: /usr/lib/debug/.build-id/d1/0ae9cb113e7585209b25ddc3f0b2cb887f1c19.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hm2_eth.so.debug File: /usr/lib/debug/.build-id/d2 40755 root:root -File: /usr/lib/debug/.build-id/d2/49cb3967e109b70d9f8edfea4b6836492f6836 120777 root:root ../../../python3/site-packages/rotarydeltakins.so -File: /usr/lib/debug/.build-id/d2/49cb3967e109b70d9f8edfea4b6836492f6836.debug 120777 root:root ../../usr/lib/python3/site-packages/rotarydeltakins.so.debug +File: /usr/lib/debug/.build-id/d2/20b744035ac544cc347e8300f2bf7354d8f942 120777 root:root ../../../linuxcnc/modules/eoffset_per_angle.so +File: /usr/lib/debug/.build-id/d2/20b744035ac544cc347e8300f2bf7354d8f942.debug 120777 root:root ../../usr/lib/linuxcnc/modules/eoffset_per_angle.so.debug +File: /usr/lib/debug/.build-id/d2/6f23b7dc46b99271f77596786795b1860a5b95 120777 root:root ../../../linuxcnc/modules/not.so +File: /usr/lib/debug/.build-id/d2/6f23b7dc46b99271f77596786795b1860a5b95.debug 120777 root:root ../../usr/lib/linuxcnc/modules/not.so.debug File: /usr/lib/debug/.build-id/d3 40755 root:root -File: /usr/lib/debug/.build-id/d3/19ecc46ffbb71c5a873770c05993fa23b88b1d 120777 root:root ../../../linuxcnc/modules/flipflop.so -File: /usr/lib/debug/.build-id/d3/19ecc46ffbb71c5a873770c05993fa23b88b1d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/flipflop.so.debug -File: /usr/lib/debug/.build-id/d3/48eeb72a0904b0cb61f2ff6c929631f3953801 120777 root:root ../../../linuxcnc/modules/time.so -File: /usr/lib/debug/.build-id/d3/48eeb72a0904b0cb61f2ff6c929631f3953801.debug 120777 root:root ../../usr/lib/linuxcnc/modules/time.so.debug -File: /usr/lib/debug/.build-id/d3/d255232bd16deb52357e8ca03e1b7b773a7b58 120777 root:root ../../../linuxcnc/modules/sampler.so -File: /usr/lib/debug/.build-id/d3/d255232bd16deb52357e8ca03e1b7b773a7b58.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sampler.so.debug -File: /usr/lib/debug/.build-id/d6 40755 root:root -File: /usr/lib/debug/.build-id/d6/abb1fe567d81c0c25da4f7be106a24f19e3f31 120777 root:root ../../../linuxcnc/modules/estop_latch.so -File: /usr/lib/debug/.build-id/d6/abb1fe567d81c0c25da4f7be106a24f19e3f31.debug 120777 root:root ../../usr/lib/linuxcnc/modules/estop_latch.so.debug +File: /usr/lib/debug/.build-id/d3/2422269644a1378ab6e68738e51e4e4668b366 120777 root:root ../../../linuxcnc/modules/hypot.so +File: /usr/lib/debug/.build-id/d3/2422269644a1378ab6e68738e51e4e4668b366.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hypot.so.debug +File: /usr/lib/debug/.build-id/d3/63e32fde54249c2384ddbb4cd931218767d241 120777 root:root ../../../linuxcnc/modules/clarke2.so +File: /usr/lib/debug/.build-id/d3/63e32fde54249c2384ddbb4cd931218767d241.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarke2.so.debug +File: /usr/lib/debug/.build-id/d4 40755 root:root +File: /usr/lib/debug/.build-id/d4/2cb0c070f5ecf7f25473b55c4ecbfc9d103aa2 120777 root:root ../../../python3/site-packages/lineardeltakins.so +File: /usr/lib/debug/.build-id/d4/2cb0c070f5ecf7f25473b55c4ecbfc9d103aa2.debug 120777 root:root ../../usr/lib/python3/site-packages/lineardeltakins.so.debug +File: /usr/lib/debug/.build-id/d4/82ecb256bb3b8807675d22a603223334f94ccd 120777 root:root ../../../linuxcnc/modules/minmax.so +File: /usr/lib/debug/.build-id/d4/82ecb256bb3b8807675d22a603223334f94ccd.debug 120777 root:root ../../usr/lib/linuxcnc/modules/minmax.so.debug +File: /usr/lib/debug/.build-id/d5 40755 root:root +File: /usr/lib/debug/.build-id/d5/f9ecbfab7304ce335e97cb30b10c7f1867b8a5 120777 root:root ../../../linuxcnc/modules/5axiskins.so +File: /usr/lib/debug/.build-id/d5/f9ecbfab7304ce335e97cb30b10c7f1867b8a5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/5axiskins.so.debug File: /usr/lib/debug/.build-id/d7 40755 root:root -File: /usr/lib/debug/.build-id/d7/6d043e2ced1fa174a7cfc34e75133e8b0e594d 120777 root:root ../../../linuxcnc/modules/lcd.so -File: /usr/lib/debug/.build-id/d7/6d043e2ced1fa174a7cfc34e75133e8b0e594d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lcd.so.debug -File: /usr/lib/debug/.build-id/d8 40755 root:root -File: /usr/lib/debug/.build-id/d8/838c819482f16b251d631c6dfd8ea6205d7a71 120777 root:root ../../../../bin/mb2hal -File: /usr/lib/debug/.build-id/d8/838c819482f16b251d631c6dfd8ea6205d7a71.debug 120777 root:root ../../usr/bin/mb2hal.debug +File: /usr/lib/debug/.build-id/d7/6b3f7745b37fb2c5b0ebf46c209d596e5919e6 120777 root:root ../../../linuxcnc/modules/multiclick.so +File: /usr/lib/debug/.build-id/d7/6b3f7745b37fb2c5b0ebf46c209d596e5919e6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/multiclick.so.debug +File: /usr/lib/debug/.build-id/d7/744f4ab8f3e2412febb7a19c93cfca65fedbe5 120777 root:root ../../../linuxcnc/modules/sphereprobe.so +File: /usr/lib/debug/.build-id/d7/744f4ab8f3e2412febb7a19c93cfca65fedbe5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sphereprobe.so.debug File: /usr/lib/debug/.build-id/da 40755 root:root -File: /usr/lib/debug/.build-id/da/49f75e590d0d92c8aab8ec99578a478e3c78af 120777 root:root ../../../linuxcnc/modules/hypot.so -File: /usr/lib/debug/.build-id/da/49f75e590d0d92c8aab8ec99578a478e3c78af.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hypot.so.debug +File: /usr/lib/debug/.build-id/da/9de4a83bce8051d9e3ec0d011d61e34aa71ce0 120777 root:root ../../../linuxcnc/modules/gearchange.so +File: /usr/lib/debug/.build-id/da/9de4a83bce8051d9e3ec0d011d61e34aa71ce0.debug 120777 root:root ../../usr/lib/linuxcnc/modules/gearchange.so.debug +File: /usr/lib/debug/.build-id/db 40755 root:root +File: /usr/lib/debug/.build-id/db/999680c5e889d6c94c8d568e8b5ff01d4b7fe2 120777 root:root ../../../linuxcnc/modules/conv_float_u32.so +File: /usr/lib/debug/.build-id/db/999680c5e889d6c94c8d568e8b5ff01d4b7fe2.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_float_u32.so.debug +File: /usr/lib/debug/.build-id/dc 40755 root:root +File: /usr/lib/debug/.build-id/dc/276cc995dba40282f396de39df3a62fda7b99c 120777 root:root ../../../linuxcnc/modules/or2.so +File: /usr/lib/debug/.build-id/dc/276cc995dba40282f396de39df3a62fda7b99c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/or2.so.debug +File: /usr/lib/debug/.build-id/df 40755 root:root +File: /usr/lib/debug/.build-id/df/ec494d0668b1261495f89018664170b325e9d6 120777 root:root ../../../python3/site-packages/linuxcnc.so +File: /usr/lib/debug/.build-id/df/ec494d0668b1261495f89018664170b325e9d6.debug 120777 root:root ../../usr/lib/python3/site-packages/linuxcnc.so.debug File: /usr/lib/debug/.build-id/e0 40755 root:root -File: /usr/lib/debug/.build-id/e0/61e1ca72567856c25c3c0970d4fec72564447e 120777 root:root ../../../linuxcnc/modules/genhexkins.so -File: /usr/lib/debug/.build-id/e0/61e1ca72567856c25c3c0970d4fec72564447e.debug 120777 root:root ../../usr/lib/linuxcnc/modules/genhexkins.so.debug -File: /usr/lib/debug/.build-id/e1 40755 root:root -File: /usr/lib/debug/.build-id/e1/4337d418b5a11fd232329d06bd5ba11fb5c370 120777 root:root ../../../linuxcnc/modules/bin2gray.so -File: /usr/lib/debug/.build-id/e1/4337d418b5a11fd232329d06bd5ba11fb5c370.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bin2gray.so.debug -File: /usr/lib/debug/.build-id/e1/aebc975eda2ee8b70af49d2352149cbb503285 120777 root:root ../../../linuxcnc/modules/hal_speaker.so -File: /usr/lib/debug/.build-id/e1/aebc975eda2ee8b70af49d2352149cbb503285.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_speaker.so.debug -File: /usr/lib/debug/.build-id/e2 40755 root:root -File: /usr/lib/debug/.build-id/e2/1ff24eeeab2c7bee1e09837d0deefa4b5597c3 120777 root:root ../../../linuxcnc/modules/comp.so -File: /usr/lib/debug/.build-id/e2/1ff24eeeab2c7bee1e09837d0deefa4b5597c3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/comp.so.debug -File: /usr/lib/debug/.build-id/e4 40755 root:root -File: /usr/lib/debug/.build-id/e4/e2f697bab9b311bae6fd1131723c170da8d97f 120777 root:root ../../../linuxcnc/modules/limit2.so -File: /usr/lib/debug/.build-id/e4/e2f697bab9b311bae6fd1131723c170da8d97f.debug 120777 root:root ../../usr/lib/linuxcnc/modules/limit2.so.debug -File: /usr/lib/debug/.build-id/e5 40755 root:root -File: /usr/lib/debug/.build-id/e5/1d45449faba364e5c9d5c7a00c357108292bc8 120777 root:root ../../../linuxcnc/modules/lincurve.so -File: /usr/lib/debug/.build-id/e5/1d45449faba364e5c9d5c7a00c357108292bc8.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lincurve.so.debug -File: /usr/lib/debug/.build-id/e5/2bfe457e0b313d3df06aae218e6b5ddf60507d 120777 root:root ../../../linuxcnc/modules/trivkins.so -File: /usr/lib/debug/.build-id/e5/2bfe457e0b313d3df06aae218e6b5ddf60507d.debug 120777 root:root ../../usr/lib/linuxcnc/modules/trivkins.so.debug +File: /usr/lib/debug/.build-id/e0/2a07ec55a65ea4a5c6f064c77ecc586ce52c2c 120777 root:root ../../../linuxcnc/modules/conv_u32_float.so +File: /usr/lib/debug/.build-id/e0/2a07ec55a65ea4a5c6f064c77ecc586ce52c2c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_u32_float.so.debug +File: /usr/lib/debug/.build-id/e0/cb4c8f5ecce108a2e7f98ef7d6a900be953b42 120777 root:root ../../../linuxcnc/modules/conv_bit_u32.so +File: /usr/lib/debug/.build-id/e0/cb4c8f5ecce108a2e7f98ef7d6a900be953b42.debug 120777 root:root ../../usr/lib/linuxcnc/modules/conv_bit_u32.so.debug +File: /usr/lib/debug/.build-id/e6 40755 root:root +File: /usr/lib/debug/.build-id/e6/6f40f3e14fb103ea51dfa5900675680ee18fd5 120777 root:root ../../../linuxcnc/modules/updown.so +File: /usr/lib/debug/.build-id/e6/6f40f3e14fb103ea51dfa5900675680ee18fd5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/updown.so.debug +File: /usr/lib/debug/.build-id/e6/cddfb0747b40b06334c8abe749961cb9b98a41 120777 root:root ../../../../bin/hy_vfd +File: /usr/lib/debug/.build-id/e6/cddfb0747b40b06334c8abe749961cb9b98a41.debug 120777 root:root ../../usr/bin/hy_vfd.debug +File: /usr/lib/debug/.build-id/e6/f01ca81733e73e01a935fee5256ea5305555a9 120777 root:root ../../../linuxcnc/modules/scarakins.so +File: /usr/lib/debug/.build-id/e6/f01ca81733e73e01a935fee5256ea5305555a9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scarakins.so.debug File: /usr/lib/debug/.build-id/e7 40755 root:root -File: /usr/lib/debug/.build-id/e7/9830a00df14fafb100e4abddd58d1da3b4aa75 120777 root:root ../../../linuxcnc/modules/thcud.so -File: /usr/lib/debug/.build-id/e7/9830a00df14fafb100e4abddd58d1da3b4aa75.debug 120777 root:root ../../usr/lib/linuxcnc/modules/thcud.so.debug -File: /usr/lib/debug/.build-id/e9 40755 root:root -File: /usr/lib/debug/.build-id/e9/0a514567837002d3287fe13c3b96defe8227ab 120777 root:root ../../../../bin/wj200_vfd -File: /usr/lib/debug/.build-id/e9/0a514567837002d3287fe13c3b96defe8227ab.debug 120777 root:root ../../usr/bin/wj200_vfd.debug -File: /usr/lib/debug/.build-id/e9/4e0e9b6eb86a2bd59d7245e2a683839a7b7ce2 120777 root:root ../../../../bin/schedrmt -File: /usr/lib/debug/.build-id/e9/4e0e9b6eb86a2bd59d7245e2a683839a7b7ce2.debug 120777 root:root ../../usr/bin/schedrmt.debug +File: /usr/lib/debug/.build-id/e7/33cf23647b642c2bb644b98c2031d8f202cf3c 120777 root:root ../../../linuxcnc/modules/maj3.so +File: /usr/lib/debug/.build-id/e7/33cf23647b642c2bb644b98c2031d8f202cf3c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/maj3.so.debug +File: /usr/lib/debug/.build-id/e7/a5b9d84019d624f4e6e239fe5e1c26dc7d30dc 120777 root:root ../../../../bin/halmeter +File: /usr/lib/debug/.build-id/e7/a5b9d84019d624f4e6e239fe5e1c26dc7d30dc.debug 120777 root:root ../../usr/bin/halmeter.debug +File: /usr/lib/debug/.build-id/eb 40755 root:root +File: /usr/lib/debug/.build-id/eb/1753ca3b2b803a8c5cd846a5ce016f84518db4 120777 root:root ../../../linuxcnc/modules/sim_parport.so +File: /usr/lib/debug/.build-id/eb/1753ca3b2b803a8c5cd846a5ce016f84518db4.debug 120777 root:root ../../usr/lib/linuxcnc/modules/sim_parport.so.debug +File: /usr/lib/debug/.build-id/eb/8da6c83fc15dcbff2ca719fd46f2f4508fa8c3 120777 root:root ../../../linuxcnc/modules/abs.so +File: /usr/lib/debug/.build-id/eb/8da6c83fc15dcbff2ca719fd46f2f4508fa8c3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs.so.debug +File: /usr/lib/debug/.build-id/eb/d012ed6e3587a030cd8e99f55d3ca3effef279 120777 root:root ../../../linuxcnc/modules/abs_s32.so +File: /usr/lib/debug/.build-id/eb/d012ed6e3587a030cd8e99f55d3ca3effef279.debug 120777 root:root ../../usr/lib/linuxcnc/modules/abs_s32.so.debug File: /usr/lib/debug/.build-id/ec 40755 root:root -File: /usr/lib/debug/.build-id/ec/4bdee0efcdc489fe2fb47df6e52b13621e60a3 120777 root:root ../../../linuxcnc/modules/xyzab_tdr_kins.so -File: /usr/lib/debug/.build-id/ec/4bdee0efcdc489fe2fb47df6e52b13621e60a3.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzab_tdr_kins.so.debug +File: /usr/lib/debug/.build-id/ec/b47eabd561571de3d759fd4476d68ca6ad9ff9 120777 root:root ../../../linuxcnc/modules/constant.so +File: /usr/lib/debug/.build-id/ec/b47eabd561571de3d759fd4476d68ca6ad9ff9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/constant.so.debug File: /usr/lib/debug/.build-id/ec/babffffd4c12d13ce62679b92c547d8ca9d08e 120777 root:root ../../../linuxcnc/modules/stepgen.so @@ -2098,13 +2074,14 @@ File: /usr/lib/debug/.build-id/ee 40755 root:root -File: /usr/lib/debug/.build-id/ee/10c738d5098611ced3b3ad956a1ba985998eda 120777 root:root ../../../linuxcnc/modules/boss_plc.so -File: /usr/lib/debug/.build-id/ee/10c738d5098611ced3b3ad956a1ba985998eda.debug 120777 root:root ../../usr/lib/linuxcnc/modules/boss_plc.so.debug +File: /usr/lib/debug/.build-id/ee/c9e747f93031124a9b3f8465d8857d3a59fcb6 120777 root:root ../../../tcl/linuxcnc/hal.so +File: /usr/lib/debug/.build-id/ee/c9e747f93031124a9b3f8465d8857d3a59fcb6.debug 120777 root:root ../../usr/lib/tcl/linuxcnc/hal.so.debug File: /usr/lib/debug/.build-id/ef 40755 root:root -File: /usr/lib/debug/.build-id/ef/cb6ab68906c113618ea9cfcee7fb376b7e9416 120777 root:root ../../../../bin/sendkeys -File: /usr/lib/debug/.build-id/ef/cb6ab68906c113618ea9cfcee7fb376b7e9416.debug 120777 root:root ../../usr/bin/sendkeys.debug -File: /usr/lib/debug/.build-id/f0 40755 root:root -File: /usr/lib/debug/.build-id/f0/afb4d920ac9da2617c23032acab5b1d40a1847 120777 root:root ../../../../bin/halrmt -File: /usr/lib/debug/.build-id/f0/afb4d920ac9da2617c23032acab5b1d40a1847.debug 120777 root:root ../../usr/bin/halrmt.debug +File: /usr/lib/debug/.build-id/ef/7d275285d2130ed26ff44c9e9fd15b27e57672 120777 root:root ../../../linuxcnc/modules/xyzab_tdr_kins.so +File: /usr/lib/debug/.build-id/ef/7d275285d2130ed26ff44c9e9fd15b27e57672.debug 120777 root:root ../../usr/lib/linuxcnc/modules/xyzab_tdr_kins.so.debug +File: /usr/lib/debug/.build-id/ef/9b7b4326dbc320fe192b73d4703d7e943ff031 120777 root:root ../../../linuxcnc/modules/flipflop.so +File: /usr/lib/debug/.build-id/ef/9b7b4326dbc320fe192b73d4703d7e943ff031.debug 120777 root:root ../../usr/lib/linuxcnc/modules/flipflop.so.debug File: /usr/lib/debug/.build-id/f1 40755 root:root -File: /usr/lib/debug/.build-id/f1/be6c83f39ff2c77422429660fbc6441c683191 120777 root:root ../../../linuxcnc/modules/scale.so -File: /usr/lib/debug/.build-id/f1/be6c83f39ff2c77422429660fbc6441c683191.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scale.so.debug +File: /usr/lib/debug/.build-id/f1/165e3da12ba11c7d6eebc8ce94a3a008d56bd9 120777 root:root ../../../linuxcnc/modules/weighted_sum.so +File: /usr/lib/debug/.build-id/f1/165e3da12ba11c7d6eebc8ce94a3a008d56bd9.debug 120777 root:root ../../usr/lib/linuxcnc/modules/weighted_sum.so.debug +File: /usr/lib/debug/.build-id/f1/3bcefc0aa8d9e26f9e4ea4ba30c6dd58cd315a 120777 root:root ../../../linuxcnc/modules/supply.so +File: /usr/lib/debug/.build-id/f1/3bcefc0aa8d9e26f9e4ea4ba30c6dd58cd315a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/supply.so.debug File: /usr/lib/debug/.build-id/f2 40755 root:root @@ -2112,8 +2089,15 @@ File: /usr/lib/debug/.build-id/f2/00ce4a53002af131f473f88f949736756ef887.debug 120777 root:root ../../usr/lib/linuxcnc/modules/watchdog.so.debug +File: /usr/lib/debug/.build-id/f2/207a5ecf14fad837ab75f48a01586b0ae679a6 120777 root:root ../../../linuxcnc/modules/threadtest.so +File: /usr/lib/debug/.build-id/f2/207a5ecf14fad837ab75f48a01586b0ae679a6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/threadtest.so.debug +File: /usr/lib/debug/.build-id/f2/83d0ad7a0a970d0538f9853df3596b2fbf23a6 120777 root:root ../../../linuxcnc/modules/simple_tp.so +File: /usr/lib/debug/.build-id/f2/83d0ad7a0a970d0538f9853df3596b2fbf23a6.debug 120777 root:root ../../usr/lib/linuxcnc/modules/simple_tp.so.debug File: /usr/lib/debug/.build-id/f2/e2d2d57608f1868dd4d5052ebe6a1c09d3128a 120777 root:root ../../../linuxcnc/modules/rotatekins.so File: /usr/lib/debug/.build-id/f2/e2d2d57608f1868dd4d5052ebe6a1c09d3128a.debug 120777 root:root ../../usr/lib/linuxcnc/modules/rotatekins.so.debug -File: /usr/lib/debug/.build-id/f3 40755 root:root -File: /usr/lib/debug/.build-id/f3/ac7b3ebf29a879e503aec749f217574b045004 120777 root:root ../../../linuxcnc/modules/clarkeinv.so -File: /usr/lib/debug/.build-id/f3/ac7b3ebf29a879e503aec749f217574b045004.debug 120777 root:root ../../usr/lib/linuxcnc/modules/clarkeinv.so.debug File: /usr/lib/debug/.build-id/f4 40755 root:root +File: /usr/lib/debug/.build-id/f4/21a955bd96ba94f2c8919b0658f3c4b505cf06 120777 root:root ../../../linuxcnc/modules/tof.so +File: /usr/lib/debug/.build-id/f4/21a955bd96ba94f2c8919b0658f3c4b505cf06.debug 120777 root:root ../../usr/lib/linuxcnc/modules/tof.so.debug +File: /usr/lib/debug/.build-id/f4/2b7cd34b0f5c019746f294171e0173dfa85109 120777 root:root ../../../linuxcnc/modules/mesa_uart.so +File: /usr/lib/debug/.build-id/f4/2b7cd34b0f5c019746f294171e0173dfa85109.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_uart.so.debug +File: /usr/lib/debug/.build-id/f4/3403b99d914a48a12613d77b8b63df86cb7675 120777 root:root ../../../linuxcnc/modules/hal_ppmc.so +File: /usr/lib/debug/.build-id/f4/3403b99d914a48a12613d77b8b63df86cb7675.debug 120777 root:root ../../usr/lib/linuxcnc/modules/hal_ppmc.so.debug File: /usr/lib/debug/.build-id/f4/ac9330017e743e9c3f4c253d90a1c3733b2c8b 120777 root:root ../../../linuxcnc/modules/scorbot-kins.so @@ -2121,257 +2105,259 @@ File: /usr/lib/debug/.build-id/f5 40755 root:root -File: /usr/lib/debug/.build-id/f5/ee168a70a399704eb989e7a4ccdc2c0973ccfb 120777 root:root ../../../linuxcnc/canterp.so -File: /usr/lib/debug/.build-id/f5/ee168a70a399704eb989e7a4ccdc2c0973ccfb.debug 120777 root:root ../../usr/lib/linuxcnc/canterp.so.debug -File: /usr/lib/debug/.build-id/f6 40755 root:root -File: /usr/lib/debug/.build-id/f6/41ea89d6bdd966e914fdb0c43ae7b9afc44b55 120777 root:root ../../../linuxcnc/modules/millturn.so -File: /usr/lib/debug/.build-id/f6/41ea89d6bdd966e914fdb0c43ae7b9afc44b55.debug 120777 root:root ../../usr/lib/linuxcnc/modules/millturn.so.debug +File: /usr/lib/debug/.build-id/f5/56c03fee720e87034f9431a6e933c032d42e09 120777 root:root ../../../linuxcnc/modules/lowpass.so +File: /usr/lib/debug/.build-id/f5/56c03fee720e87034f9431a6e933c032d42e09.debug 120777 root:root ../../usr/lib/linuxcnc/modules/lowpass.so.debug +File: /usr/lib/debug/.build-id/f5/c4e7b82fbcc6a25e03b5fd56a70ca4bb630748 120777 root:root ../../../../bin/linuxcnc_module_helper +File: /usr/lib/debug/.build-id/f5/c4e7b82fbcc6a25e03b5fd56a70ca4bb630748.debug 120777 root:root ../../usr/bin/linuxcnc_module_helper.debug +File: /usr/lib/debug/.build-id/f7 40755 root:root +File: /usr/lib/debug/.build-id/f7/4e998af1917a20f13e4a03eceea20cf70e24fc 120777 root:root ../../../linuxcnc/modules/debounce.so +File: /usr/lib/debug/.build-id/f7/4e998af1917a20f13e4a03eceea20cf70e24fc.debug 120777 root:root ../../usr/lib/linuxcnc/modules/debounce.so.debug +File: /usr/lib/debug/.build-id/f9 40755 root:root +File: /usr/lib/debug/.build-id/f9/021ca166e7ad031ee4362aa9c496b80ec9b909 120777 root:root ../../../linuxcnc/modules/bitslice.so +File: /usr/lib/debug/.build-id/f9/021ca166e7ad031ee4362aa9c496b80ec9b909.debug 120777 root:root ../../usr/lib/linuxcnc/modules/bitslice.so.debug +File: /usr/lib/debug/.build-id/f9/798aabab75f9e96a3980acac4b423cd112b3e5 120777 root:root ../../../linuxcnc/modules/message.so +File: /usr/lib/debug/.build-id/f9/798aabab75f9e96a3980acac4b423cd112b3e5.debug 120777 root:root ../../usr/lib/linuxcnc/modules/message.so.debug File: /usr/lib/debug/.build-id/fa 40755 root:root -File: /usr/lib/debug/.build-id/fa/835c1410c5339b9061a10820a88c1a642c2086 120777 root:root ../../../linuxcnc/modules/mesa_pktgyro_test.so -File: /usr/lib/debug/.build-id/fa/835c1410c5339b9061a10820a88c1a642c2086.debug 120777 root:root ../../usr/lib/linuxcnc/modules/mesa_pktgyro_test.so.debug +File: /usr/lib/debug/.build-id/fa/abfa4aa6ff053d2b021992a41afd628aca9073 120777 root:root ../../../linuxcnc/modules/and2.so +File: /usr/lib/debug/.build-id/fa/abfa4aa6ff053d2b021992a41afd628aca9073.debug 120777 root:root ../../usr/lib/linuxcnc/modules/and2.so.debug File: /usr/lib/debug/.build-id/fb 40755 root:root -File: /usr/lib/debug/.build-id/fb/aa085666bc9f2b0263b527ed714b645570210c 120777 root:root ../../../linuxcnc/modules/logic.so -File: /usr/lib/debug/.build-id/fb/aa085666bc9f2b0263b527ed714b645570210c.debug 120777 root:root ../../usr/lib/linuxcnc/modules/logic.so.debug -File: /usr/lib/debug/.build-id/fb/bce530269895d032c9e7f9d08681817b95112b 120777 root:root ../../../../bin/milltask -File: /usr/lib/debug/.build-id/fb/bce530269895d032c9e7f9d08681817b95112b.debug 120777 root:root ../../usr/bin/milltask.debug -File: /usr/lib/debug/.build-id/fc 40755 root:root -File: /usr/lib/debug/.build-id/fc/e2a82a1a1c34b5c738049d8cec426954852082 120777 root:root ../../../linuxcnc/modules/updown.so -File: /usr/lib/debug/.build-id/fc/e2a82a1a1c34b5c738049d8cec426954852082.debug 120777 root:root ../../usr/lib/linuxcnc/modules/updown.so.debug +File: /usr/lib/debug/.build-id/fb/50acf86f88cda9c9994b31bf99d99a22e8215b 120777 root:root ../../../linuxcnc/modules/blend.so +File: /usr/lib/debug/.build-id/fb/50acf86f88cda9c9994b31bf99d99a22e8215b.debug 120777 root:root ../../usr/lib/linuxcnc/modules/blend.so.debug +File: /usr/lib/debug/.build-id/fb/c559115a4a8f875ef61b54d26db1226bac0047 120777 root:root ../../../linuxcnc/modules/scaled_s32_sums.so +File: /usr/lib/debug/.build-id/fb/c559115a4a8f875ef61b54d26db1226bac0047.debug 120777 root:root ../../usr/lib/linuxcnc/modules/scaled_s32_sums.so.debug File: /usr/lib/debug/.build-id/ff 40755 root:root -File: /usr/lib/debug/.build-id/ff/4fb6d3000a6d72220e0d683083881391732e07 120777 root:root ../../../../bin/genserkins -File: /usr/lib/debug/.build-id/ff/4fb6d3000a6d72220e0d683083881391732e07.debug 120777 root:root ../../usr/bin/genserkins.debug File: /usr/lib/debug/.build-id/ff/51514eabd5b03df863be04c6ed9ba118c074fb 120777 root:root ../../../linuxcnc/modules/maxkins.so File: /usr/lib/debug/.build-id/ff/51514eabd5b03df863be04c6ed9ba118c074fb.debug 120777 root:root ../../usr/lib/linuxcnc/modules/maxkins.so.debug -File: /usr/lib/debug/usr/bin/classicladder.debug 100644 root:root 9c0e8f4cd8355e667a2fc8d4cda8d021 -File: /usr/lib/debug/usr/bin/genserkins.debug 100644 root:root 700c81a4010efdb8621716526e6ff53e -File: /usr/lib/debug/usr/bin/gs2_vfd.debug 100644 root:root a0b0f8dc1765133eec5a2d5134cdf48f -File: /usr/lib/debug/usr/bin/halcmd.debug 100644 root:root 5a197e3a8a1785b18cb7f079cb2e60d5 -File: /usr/lib/debug/usr/bin/halmeter.debug 100644 root:root 986f3da43527f291ec22a30881bcf4a8 -File: /usr/lib/debug/usr/bin/halrmt.debug 100644 root:root a2c51751d825a1a1859b3880ceec5a11 -File: /usr/lib/debug/usr/bin/halsampler.debug 100644 root:root f4a027fe0aa73864942d3cb3fb4678a9 -File: /usr/lib/debug/usr/bin/halscope.debug 100644 root:root 90aa8c59faa69f44641ab4c22bf0af7f -File: /usr/lib/debug/usr/bin/halstreamer.debug 100644 root:root 8c095bb099917dcafca2ba51ac5c2145 -File: /usr/lib/debug/usr/bin/halui.debug 100644 root:root 32e5970a0063ada6c2e55bff0ed66f81 -File: /usr/lib/debug/usr/bin/hy_gt_vfd.debug 100644 root:root 8f573324d848923fd9ed9767c3310689 -File: /usr/lib/debug/usr/bin/hy_vfd.debug 100644 root:root eb5017607a4dc213de644f5b4b7dd9a6 -File: /usr/lib/debug/usr/bin/inivar.debug 100644 root:root cd1919cab54e5caaf037cc6e5d6b1edf -File: /usr/lib/debug/usr/bin/io.debug 100644 root:root 77b642eead1cec7629f01107966df4cf -File: /usr/lib/debug/usr/bin/iov2.debug 100644 root:root 257dbf80dc131343e06d9fe6aec30eda -File: /usr/lib/debug/usr/bin/linuxcnc_module_helper.debug 100644 root:root 0fe226bf1c0d69cfe88fbef22483b611 -File: /usr/lib/debug/usr/bin/linuxcnclcd.debug 100644 root:root 1cfd9ec1546477a8909b0a4ee65199e6 -File: /usr/lib/debug/usr/bin/linuxcncrsh.debug 100644 root:root b230ea55cdcaed8974a18995ea45a850 -File: /usr/lib/debug/usr/bin/linuxcncsvr.debug 100644 root:root 781a2a217bfa37fe3dd5c1ad0d87c54f -File: /usr/lib/debug/usr/bin/mb2hal.debug 100644 root:root 7a98ab315ce48303fd4f3b778e79d89c -File: /usr/lib/debug/usr/bin/milltask.debug 100644 root:root c58385f593b1f5dde898e2530369defe -File: /usr/lib/debug/usr/bin/motion-logger.debug 100644 root:root 72a1e2936d0c9f5acef1cb09350660fa -File: /usr/lib/debug/usr/bin/panelui.debug 100644 root:root 2be8c67766bbec98034996e6e13d770f -File: /usr/lib/debug/usr/bin/pi500_vfd.debug 100644 root:root e797e241975879c34825f859f9da4db3 -File: /usr/lib/debug/usr/bin/rs274.debug 100644 root:root 5be45f6c29b732d7e142b79c46f013af -File: /usr/lib/debug/usr/bin/rtapi_app.debug 100644 root:root 9509bb0aebcd139f7140316f73863634 -File: /usr/lib/debug/usr/bin/schedrmt.debug 100644 root:root ec27ae22966106ffa991eb120609d567 -File: /usr/lib/debug/usr/bin/sendkeys.debug 100644 root:root 2462965d8dc2b5e44d8d056277f5a331 -File: /usr/lib/debug/usr/bin/shuttle.debug 100644 root:root b72334f66ad3aab6affca5e134b12f95 -File: /usr/lib/debug/usr/bin/svd-ps_vfd.debug 100644 root:root 893a2f95947ad40a9c8aa22302281bd8 -File: /usr/lib/debug/usr/bin/thermistor.debug 100644 root:root 839a7fa5bbe04d4b46b02d39cb46019c -File: /usr/lib/debug/usr/bin/tool_mmap_read.debug 100644 root:root 149102bb0428acd157d359678dd427ea -File: /usr/lib/debug/usr/bin/tool_watch.debug 100644 root:root d3f16508930cc8f355c1e805a39fc059 -File: /usr/lib/debug/usr/bin/vfdb_vfd.debug 100644 root:root d7ffd38de99850e0d0953bea908ae505 -File: /usr/lib/debug/usr/bin/vfs11_vfd.debug 100644 root:root ebba303da0593aaeaa722680f000c39e -File: /usr/lib/debug/usr/bin/wj200_vfd.debug 100644 root:root c1b566be389cd92aef5cd12a9a25d02f -File: /usr/lib/debug/usr/bin/xhc-hb04.debug 100644 root:root 3d8fa8d43c99a066bedc03cc19932723 -File: /usr/lib/debug/usr/bin/xhc-whb04b-6.debug 100644 root:root 23853decd667bb84e9f053eb6e91c5f1 +File: /usr/lib/debug/usr/bin/classicladder.debug 100644 root:root 3b39737727a2fe414ee71f2b48e33021 +File: /usr/lib/debug/usr/bin/genserkins.debug 100644 root:root 33b84a747d8a8722bc98414be67b2b78 +File: /usr/lib/debug/usr/bin/gs2_vfd.debug 100644 root:root 08cc7daecf545ca8282141fbc7ef0b3b +File: /usr/lib/debug/usr/bin/halcmd.debug 100644 root:root 49881d3745c16f7d7ce0751c2d996473 +File: /usr/lib/debug/usr/bin/halmeter.debug 100644 root:root 3f87fd6eb347fb766338a1e0895f4066 +File: /usr/lib/debug/usr/bin/halrmt.debug 100644 root:root 684e1dbbec2bf4b0dd15fc86615c8907 +File: /usr/lib/debug/usr/bin/halsampler.debug 100644 root:root 68cb99b438082b2a87ffd39b9a0015f9 +File: /usr/lib/debug/usr/bin/halscope.debug 100644 root:root 24f1c7277efcc8dd90f08c7df8025aa3 +File: /usr/lib/debug/usr/bin/halstreamer.debug 100644 root:root 384b81c48b12418055597e050e9c6300 +File: /usr/lib/debug/usr/bin/halui.debug 100644 root:root 11f2e914be6c8db4c000194023c65eaa +File: /usr/lib/debug/usr/bin/hy_gt_vfd.debug 100644 root:root 36940bd850e92e8add2bd138c82e5fd8 +File: /usr/lib/debug/usr/bin/hy_vfd.debug 100644 root:root 3a339d270ca2589f27893c4d8cad7655 +File: /usr/lib/debug/usr/bin/inivar.debug 100644 root:root eeab82a33cdfa71a67e1cd18112ce3a8 +File: /usr/lib/debug/usr/bin/io.debug 100644 root:root b089d8de8e3736dc32b91aa5a9a67214 +File: /usr/lib/debug/usr/bin/iov2.debug 100644 root:root 7bd4a502128ba5c8d0ce5b8aa7f5a0c5 +File: /usr/lib/debug/usr/bin/linuxcnc_module_helper.debug 100644 root:root 9e18104347b6cb8fef95f5e159171a60 +File: /usr/lib/debug/usr/bin/linuxcnclcd.debug 100644 root:root 187827d0c1142adb41afe0d3252dcc10 +File: /usr/lib/debug/usr/bin/linuxcncrsh.debug 100644 root:root f6f968f3b7335220153a3612e8c27e1c +File: /usr/lib/debug/usr/bin/linuxcncsvr.debug 100644 root:root bc541c4659d40b81f5d8aa8ac84acee7 +File: /usr/lib/debug/usr/bin/mb2hal.debug 100644 root:root 328daafa225fbc170db19502da97f323 +File: /usr/lib/debug/usr/bin/milltask.debug 100644 root:root 6a701a1733eb49b4a63eba42b489ab35 +File: /usr/lib/debug/usr/bin/motion-logger.debug 100644 root:root 0673b5234c3f0affccecf40243a53af2 +File: /usr/lib/debug/usr/bin/panelui.debug 100644 root:root b8fd5af41af4f53f32c930fd7629fa51 +File: /usr/lib/debug/usr/bin/pi500_vfd.debug 100644 root:root 3d0272b341be7b4a811bdccab3381f7f +File: /usr/lib/debug/usr/bin/rs274.debug 100644 root:root a5c891a527622dffa30052ff993a86a3 +File: /usr/lib/debug/usr/bin/rtapi_app.debug 100644 root:root fed20d272ad087aef61e4be716f0ae2f +File: /usr/lib/debug/usr/bin/schedrmt.debug 100644 root:root f459598c4ab0343b39cbc31a0fd79b30 +File: /usr/lib/debug/usr/bin/sendkeys.debug 100644 root:root 8bd602166cbcc771075fa4b69cdaae78 +File: /usr/lib/debug/usr/bin/shuttle.debug 100644 root:root 7e12c34217108ff28cc09be2ee36775d +File: /usr/lib/debug/usr/bin/svd-ps_vfd.debug 100644 root:root 61832ef63582d9a9534e148c66ed55aa +File: /usr/lib/debug/usr/bin/thermistor.debug 100644 root:root 608c0dff3f37130d58b041f4075e4566 +File: /usr/lib/debug/usr/bin/tool_mmap_read.debug 100644 root:root 7438142b4510f512005926e08b568d68 +File: /usr/lib/debug/usr/bin/tool_watch.debug 100644 root:root 87b97dcd92bfc6ee428ab7687f8bc883 +File: /usr/lib/debug/usr/bin/vfdb_vfd.debug 100644 root:root c692d3b0816e621a8d998fb67c844cb0 +File: /usr/lib/debug/usr/bin/vfs11_vfd.debug 100644 root:root 86c6acc4d84c84c3a5abacd1243b70d5 +File: /usr/lib/debug/usr/bin/wj200_vfd.debug 100644 root:root cbb34155d346027070a9d877c231c2ac +File: /usr/lib/debug/usr/bin/xhc-hb04.debug 100644 root:root 3738685b25f3bdb59fb7c8ff94910549 +File: /usr/lib/debug/usr/bin/xhc-whb04b-6.debug 100644 root:root d98d516571db6c171e99507a64df41e4 File: /usr/lib/debug/usr/lib/linuxcnc 40755 root:root -File: /usr/lib/debug/usr/lib/linuxcnc/canterp.so.debug 100644 root:root 0824e32b783bb9f4c0cb025bd3f4b29a +File: /usr/lib/debug/usr/lib/linuxcnc/canterp.so.debug 100644 root:root e5cf57be98008b10fc46dfdf8243bca6 File: /usr/lib/debug/usr/lib/linuxcnc/modules 40755 root:root -File: /usr/lib/debug/usr/lib/linuxcnc/modules/5axiskins.so.debug 100644 root:root c2fd570c8b249ca76037b0e222b88e3e -File: /usr/lib/debug/usr/lib/linuxcnc/modules/abs.so.debug 100644 root:root a420f43938f396b7d9029ac91c66e78a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/abs_s32.so.debug 100644 root:root 20bc7e3b4d646b6fef7278a3de6097ba -File: /usr/lib/debug/usr/lib/linuxcnc/modules/and2.so.debug 100644 root:root fa89aca467f81d4758b78a6aef961581 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/anglejog.so.debug 100644 root:root e5ed45afd57783b8ed031d1e3922bf99 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/axistest.so.debug 100644 root:root 8b2b0596ba2fcdfbe521a2ab580cbecf -File: /usr/lib/debug/usr/lib/linuxcnc/modules/bin2gray.so.debug 100644 root:root 40e7cebf03d416b11f463a345e021b93 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/biquad.so.debug 100644 root:root 46bf8f3f958b76839c52c59eba457b0f -File: /usr/lib/debug/usr/lib/linuxcnc/modules/bitslice.so.debug 100644 root:root 2fd76b039774a2208f968e494971bf7d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/bitwise.so.debug 100644 root:root c570a07fe578d3d151c1f6d4827b945a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/bldc.so.debug 100644 root:root c71ebee9fbdd3e705eaef0bab09bf83f -File: /usr/lib/debug/usr/lib/linuxcnc/modules/blend.so.debug 100644 root:root 37b21a64c5aab520de30332762ab1609 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/boss_plc.so.debug 100644 root:root 53ba8aea343cf3dfb78951532ea02d64 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/carousel.so.debug 100644 root:root 77c6e2b9ad572254ba2d15fcf1919d8a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/charge_pump.so.debug 100644 root:root 2b62f4ccc5cab39c182ae637dcef302b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/clarke2.so.debug 100644 root:root 79402c5f8f8f144f4dddc24c4add9aa8 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/clarke3.so.debug 100644 root:root 3ab686c26d4307485b6c966273c08acd -File: /usr/lib/debug/usr/lib/linuxcnc/modules/clarkeinv.so.debug 100644 root:root 230fd707971cf9d94aef1ce8a4733627 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/classicladder_rt.so.debug 100644 root:root a753ad4c76a9a9647753a0427a5303d8 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/comp.so.debug 100644 root:root a6f889429dcccd41a3d733acdddcc645 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/constant.so.debug 100644 root:root f038b47206f5f7768069afc3a8d13dcf -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_bit_float.so.debug 100644 root:root 7fbe4a432801f48e44df39689cb379fa -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_bit_s32.so.debug 100644 root:root 44b7b2e995382495b5de286151417a5e -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_bit_u32.so.debug 100644 root:root c949d30331ed70f10f2f213f9305c78f -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_float_s32.so.debug 100644 root:root 058118966192c3671e328dba7edb21c2 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_float_u32.so.debug 100644 root:root 6361f168a59665c5d690bb4d191eb30d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_s32_bit.so.debug 100644 root:root 6caa18b6f4188eaddd7f0990e3b1647b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_s32_float.so.debug 100644 root:root 28f678e8944640334a8e7eeea7d39f1a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_s32_u32.so.debug 100644 root:root eae1d061a8701a9b9d682bd5a20e6ede -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_u32_bit.so.debug 100644 root:root 4b230d20e8737d3b00c9d6a65e30c338 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_u32_float.so.debug 100644 root:root 4d536cc25821fef1c350a53f2b07adfb -File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_u32_s32.so.debug 100644 root:root 62dbc83b503481561bbe6b505e004143 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/corexy_by_hal.so.debug 100644 root:root c8e23a1ab18ca7f18c610a5e5a74c5f1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/5axiskins.so.debug 100644 root:root 0e87098cde8eeaea82f6c9e338ec7098 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/abs.so.debug 100644 root:root 3937eb0350eb75490174f3bbf256e416 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/abs_s32.so.debug 100644 root:root 06bbe608213d226603d28af4b52fa9b9 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/and2.so.debug 100644 root:root 29345e9e92c7d7aca085f747a32ea33a +File: /usr/lib/debug/usr/lib/linuxcnc/modules/anglejog.so.debug 100644 root:root a10cb106e7c274e66f28175338eb5c1e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/axistest.so.debug 100644 root:root 9cab2beb2647f29676aefdfe48d11c1f +File: /usr/lib/debug/usr/lib/linuxcnc/modules/bin2gray.so.debug 100644 root:root 52d75f2e76afd5d436b438b985ec4b29 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/biquad.so.debug 100644 root:root 9d9d326fa948426008fb8f4b43346369 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/bitslice.so.debug 100644 root:root 0092650bfd4cc933cd3ecb0002096663 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/bitwise.so.debug 100644 root:root 51f476a56a8d5aa5e6edfd7f812d140f +File: /usr/lib/debug/usr/lib/linuxcnc/modules/bldc.so.debug 100644 root:root 91f3a3402285137b5f5aed1794037eff +File: /usr/lib/debug/usr/lib/linuxcnc/modules/blend.so.debug 100644 root:root 0120f6343c11e7a9a29d94f2475f2259 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/boss_plc.so.debug 100644 root:root 5a41668939eae7a23eb424b92d3122e5 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/carousel.so.debug 100644 root:root 7dd96ea7ac5ca02950532904de083baf +File: /usr/lib/debug/usr/lib/linuxcnc/modules/charge_pump.so.debug 100644 root:root ce7b98dc6a5c470568366322c97ccc62 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/clarke2.so.debug 100644 root:root f8ea085cddc568aab19b7014e9f84a7c +File: /usr/lib/debug/usr/lib/linuxcnc/modules/clarke3.so.debug 100644 root:root 08fcec7fba687a2f1923899438b086b2 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/clarkeinv.so.debug 100644 root:root 1b8257342180e20f45581791b5026e69 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/classicladder_rt.so.debug 100644 root:root 1763544777105940d13973d9a1dace76 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/comp.so.debug 100644 root:root 796fe74573d6d20a38eda0eb62bf6447 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/constant.so.debug 100644 root:root 55257ca65d6a6c6cea5bb4c29374e48f +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_bit_float.so.debug 100644 root:root 4c2a40645fa3092614fcff6a8f16e24e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_bit_s32.so.debug 100644 root:root 7c8adb2db0b86f76ac1787520aeeb5f2 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_bit_u32.so.debug 100644 root:root 9edf8e6a2df253ef92fff81259377e6d +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_float_s32.so.debug 100644 root:root c59cec4568253bc4717f9f8a62320efc +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_float_u32.so.debug 100644 root:root 4681ab129ad01fa38169b92c06f1ba55 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_s32_bit.so.debug 100644 root:root 566f563799356044b8d31e4df71b8adc +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_s32_float.so.debug 100644 root:root e2cd90506dd49f16f080a2c2c582b103 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_s32_u32.so.debug 100644 root:root 4fb27e6e1f8317454c7d0a896ef78431 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_u32_bit.so.debug 100644 root:root c08cb0944d1477f6be0cd48801461155 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_u32_float.so.debug 100644 root:root ebf4fc7f380d7a87ce19e8508787cb8e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/conv_u32_s32.so.debug 100644 root:root 5a957cb7e083b20644887bba46181c11 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/corexy_by_hal.so.debug 100644 root:root fb3d0c648377a1d3a67aefba1fd39c46 File: /usr/lib/debug/usr/lib/linuxcnc/modules/corexykins.so.debug 100644 root:root 77afde8945e75ebd84d676833e1ad83d File: /usr/lib/debug/usr/lib/linuxcnc/modules/counter.so.debug 100644 root:root 00a0c30748315005e9c1cddc4ef70100 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/dbounce.so.debug 100644 root:root 5214f362788ad313fd709531b7859961 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/ddt.so.debug 100644 root:root 617401cfebf1fc64889beedee36f951d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/deadzone.so.debug 100644 root:root 249edaa392323fca64a27c4c6b0dc962 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/debounce.so.debug 100644 root:root 4d3514ba81df7f24a49d698958b09692 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/demux.so.debug 100644 root:root 493c67b3827e4ce6fac3b28ebbe75a10 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/differential.so.debug 100644 root:root 568d90c8efc7d6d495785cdae01bfa87 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/div2.so.debug 100644 root:root 19f8c1afb5883c957ef23075daee7e6e -File: /usr/lib/debug/usr/lib/linuxcnc/modules/edge.so.debug 100644 root:root 298b142cc2e29c0d03c667d9179bcbbf -File: /usr/lib/debug/usr/lib/linuxcnc/modules/encoder.so.debug 100644 root:root 76f97dc60ea1bcda8b5ab011473b251a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/encoder_ratio.so.debug 100644 root:root d501e9286f5ce49f557ad2b281fb231c -File: /usr/lib/debug/usr/lib/linuxcnc/modules/enum.so.debug 100644 root:root 606f38eaa3d45858cacad8246cb96293 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/eoffset_per_angle.so.debug 100644 root:root 319f0bd49a79d87f28a0d1b7b258c4fb -File: /usr/lib/debug/usr/lib/linuxcnc/modules/estop_latch.so.debug 100644 root:root 693cb2f101f00a3d7a72664d7f8ade8e -File: /usr/lib/debug/usr/lib/linuxcnc/modules/feedcomp.so.debug 100644 root:root fda8586ef532a7431ddf5f14085376fb -File: /usr/lib/debug/usr/lib/linuxcnc/modules/filter_kalman.so.debug 100644 root:root fa60f4c5efe3baa3dbb39b76448f45c4 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/flipflop.so.debug 100644 root:root fd24149c62c7ee5a8ae4e32e32a7544d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/gantry.so.debug 100644 root:root fe76a7c9c8480992f2a4ce0c3b86c876 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/gearchange.so.debug 100644 root:root ca714796e39f890b385e340a126ebbaa -File: /usr/lib/debug/usr/lib/linuxcnc/modules/genhexkins.so.debug 100644 root:root 1d02b43cfe48f88846ad12f610c252a6 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/genserkins.so.debug 100644 root:root d8f460fc232b0ae86385d59598020144 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/gray2bin.so.debug 100644 root:root 2be606e160b0588dbadfe2307ced7ae8 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_bb_gpio.so.debug 100644 root:root 81da4a371a83c1420baf4f69fc0aaffc -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_gm.so.debug 100644 root:root 1a66c986fd4a4cb76127a823f7493e4f -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_lib.so.debug 100644 root:root 777b2dfbbbe4bc28c46664525dfef22b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_parport.so.debug 100644 root:root f06d988bb785d90185eb8a87b246b73a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_pi_gpio.so.debug 100644 root:root 8773a8762e10a070de3d951bc1a989d5 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_ppmc.so.debug 100644 root:root b95fdc1e8c7775a5565855ae9893f698 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_speaker.so.debug 100644 root:root 22cc54c6d0415eb72d3447f1559f6b2b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/histobins.so.debug 100644 root:root 097483cd5729d48fd36e24f5b09ec80c -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_7i43.so.debug 100644 root:root a49413a37ba61e02b98fb3dd1ce07b8d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_7i90.so.debug 100644 root:root 35af1dc462cdea112e33447e64fb742e -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_eth.so.debug 100644 root:root 7dcaf8f32e3d183bc8a73849635d7b65 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_pci.so.debug 100644 root:root d070d1dc8580385353e9314dc4874c7b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_rpspi.so.debug 100644 root:root a78e08c7bf2c2976dd2af5151ea70458 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_spi.so.debug 100644 root:root 3cbe6373f1596792a3002c67dd23a78f -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_test.so.debug 100644 root:root a666398db00b9c63949bc82401b6c2a1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/dbounce.so.debug 100644 root:root 8d8904a40ed153abe15ab8a147528d84 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/ddt.so.debug 100644 root:root 1802f510351d823687a7d857b1a03f37 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/deadzone.so.debug 100644 root:root 6280e55d5e5a6cbf1970ae00217b34de +File: /usr/lib/debug/usr/lib/linuxcnc/modules/debounce.so.debug 100644 root:root 65942a03e3e585345954b36c945a3ce0 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/demux.so.debug 100644 root:root b5f909ca0d1535b3077573db29d27c02 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/differential.so.debug 100644 root:root 381d45506d7154b552809417ba9a3332 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/div2.so.debug 100644 root:root df3079ca4880c3480944fdaec3601f8c +File: /usr/lib/debug/usr/lib/linuxcnc/modules/edge.so.debug 100644 root:root d9fd9bfdd1f6782e1363bfa269a28d94 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/encoder.so.debug 100644 root:root 5004c1e0afb573240b569c993617b732 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/encoder_ratio.so.debug 100644 root:root 9709cd98df3e94c0af6ea9b6cab40c95 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/enum.so.debug 100644 root:root 7932f86f0bfb5779af81887381da1cf7 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/eoffset_per_angle.so.debug 100644 root:root f232cc44fd099dbdb4ebc672a2eba0ba +File: /usr/lib/debug/usr/lib/linuxcnc/modules/estop_latch.so.debug 100644 root:root 5793541134dad42a2dc229628d0dd8c8 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/feedcomp.so.debug 100644 root:root 5ebcbb7e638a42b7ace6273b0de1b307 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/filter_kalman.so.debug 100644 root:root 28ccf2c9489613a5ae02c266e0da8eec +File: /usr/lib/debug/usr/lib/linuxcnc/modules/flipflop.so.debug 100644 root:root 8b7e9032db5f0613edfd15e7b99f1f83 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/gantry.so.debug 100644 root:root 357ebae3e0bff9e7c5cd3361f77a5806 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/gearchange.so.debug 100644 root:root e91f41ce209648a85fadbb0db87aae91 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/genhexkins.so.debug 100644 root:root ec2580ae02fb825bdc76bb3b03456c11 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/genserkins.so.debug 100644 root:root 07a82329a3a6aac85efbb6da21082249 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/gray2bin.so.debug 100644 root:root e039842b485b768b4cd502a1cef9ea0a +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_bb_gpio.so.debug 100644 root:root ed6cc42e2e5b59080f2658397acda994 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_gm.so.debug 100644 root:root 8963ea5cc1ea1d2d0a80058c57e74336 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_lib.so.debug 100644 root:root 757a51b3b9006306c48cf61130d11e11 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_parport.so.debug 100644 root:root a41220ebec7cd3660d4dc11292a3994e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_pi_gpio.so.debug 100644 root:root 44a96cdabb1c47cb304dc51f752749fc +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_ppmc.so.debug 100644 root:root f046944f3a17b785dbc43d683ceaa635 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hal_speaker.so.debug 100644 root:root d45e89789428496687f80bc9ffe90bb7 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/histobins.so.debug 100644 root:root 5a602bae99a62324db3e1cf1f4252032 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_7i43.so.debug 100644 root:root 87fdd6951bed5bb4045549ece9f19dc3 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_7i90.so.debug 100644 root:root a59701d40a4794a600e2b5d79581551e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_eth.so.debug 100644 root:root ca1f821d6caa290889d9550158f74ced +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_pci.so.debug 100644 root:root 7a4b8a8c8a57060549ad085b4e67823f +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_rpspi.so.debug 100644 root:root 2b9f5bc279ff04222868154a0ce102f9 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_spi.so.debug 100644 root:root dbcf54822e4ef9a6314a93d85a4c8df4 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hm2_test.so.debug 100644 root:root 6bc47d633dbcc99ded48266425bed615 File: /usr/lib/debug/usr/lib/linuxcnc/modules/homecomp.so.debug 100644 root:root 3ca867421d604c086b4cbadec3ad2418 File: /usr/lib/debug/usr/lib/linuxcnc/modules/homemod.so.debug 100644 root:root 6769fdbe0b2cee146bb06ce0a29f0de9 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hostmot2.so.debug 100644 root:root 6ccc09a929d14e0e40480fc20d6d6bd3 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/hypot.so.debug 100644 root:root 596c835dac5d375ce3abf52a70c7fe24 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/ilowpass.so.debug 100644 root:root 7b468a6c796bd9dcc76dfd630d70fa26 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/integ.so.debug 100644 root:root 616ebbcd4fbc2e3338cbcecd072440b0 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/invert.so.debug 100644 root:root 643018b5ff7a51a1c562f948471d0cb5 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/joyhandle.so.debug 100644 root:root c74c2ae4d3f305381cd6506dd848b585 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/knob2float.so.debug 100644 root:root bc302833a9765ec064ece3aac44c25b6 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/latencybins.so.debug 100644 root:root 43f41901c1a63abcb380d1f9b1227fb2 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/lcd.so.debug 100644 root:root 7b981b5fb4d090b39160a3cc31b204fc -File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit1.so.debug 100644 root:root acdc900cf9417c95f3357c74ffb76035 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit2.so.debug 100644 root:root 97e5afff9cd137a908b3835320e68314 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit3.so.debug 100644 root:root 564aa3929fd6ba5c30e6e6e1332ebbaa -File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit_axis.so.debug 100644 root:root 9414c15b70f2f7fb625b8d56cecbeadb -File: /usr/lib/debug/usr/lib/linuxcnc/modules/lincurve.so.debug 100644 root:root 2179b81275488b11037980a8d83982e1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hostmot2.so.debug 100644 root:root 247eae3f5263a362b748848cb7997e53 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/hypot.so.debug 100644 root:root 29db6650b48cff567433fe6017cd4c49 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/ilowpass.so.debug 100644 root:root b3e639fc6e23e765577bf3035c512734 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/integ.so.debug 100644 root:root 07443a2743493051396ae997236096e0 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/invert.so.debug 100644 root:root 481356b4559ec35b17a448bea64f5407 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/joyhandle.so.debug 100644 root:root 012d5148e730f6c78a6d13a646dda6c5 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/knob2float.so.debug 100644 root:root 5aecfa704d58106783250e36610577fe +File: /usr/lib/debug/usr/lib/linuxcnc/modules/latencybins.so.debug 100644 root:root 2ba8cff7b11a8f3d3d13be25462f0c96 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/lcd.so.debug 100644 root:root 024910cb0d7ee40acf3f2d7cc5c66f12 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit1.so.debug 100644 root:root 6526b7c701919d66aee3a32314a14bfb +File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit2.so.debug 100644 root:root 66d55dd22818a449fda3e1a3893c016c +File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit3.so.debug 100644 root:root 14bb3e4452e1c2d5f9cea6b234474bf1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/limit_axis.so.debug 100644 root:root 401068cebb4daba8ca4b484f93f1ca68 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/lincurve.so.debug 100644 root:root 448a3a50faa70e643e1a6e53f1efc64b File: /usr/lib/debug/usr/lib/linuxcnc/modules/lineardeltakins.so.debug 100644 root:root 0bf8e30e2b1dc3ed7a69d618ddfac4cf -File: /usr/lib/debug/usr/lib/linuxcnc/modules/logic.so.debug 100644 root:root f4f1b6b58fbd2d94827ac865d4b96a36 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/lowpass.so.debug 100644 root:root b8c21d37a64875bb73814a97bcbe2d1f -File: /usr/lib/debug/usr/lib/linuxcnc/modules/lut5.so.debug 100644 root:root 8cd063f0308ebbdd36d5e9b92e3b8888 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/maj3.so.debug 100644 root:root 4963e302c78b2f4940096a4d01c247a5 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/match8.so.debug 100644 root:root f7b4d14ea856a75abb2f44d541e255d6 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/logic.so.debug 100644 root:root 889677b117f51cb660cad46a67fbe288 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/lowpass.so.debug 100644 root:root 5a512af76ed039e121ec24e4de4e2bfd +File: /usr/lib/debug/usr/lib/linuxcnc/modules/lut5.so.debug 100644 root:root fe553b6f430cd1ca1691ea4aad233e63 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/maj3.so.debug 100644 root:root 0a9f5ea50ab765af909d0cfd7fa013c9 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/match8.so.debug 100644 root:root 3e375b6bf02938f932006d38e462e6e4 File: /usr/lib/debug/usr/lib/linuxcnc/modules/matrix_kb.so.debug 100644 root:root 87b8fdb9e133a3f659e603492dcc2b95 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/max31855.so.debug 100644 root:root 15c69b04345a9e2ec68e760976210a8b +File: /usr/lib/debug/usr/lib/linuxcnc/modules/max31855.so.debug 100644 root:root ad9b1f1e3fe42936c6824656033743e7 File: /usr/lib/debug/usr/lib/linuxcnc/modules/maxkins.so.debug 100644 root:root bf21e6f67c24ad040b6b1569131f178d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mesa_7i65.so.debug 100644 root:root 563dff1f19e640e9c02e92a75f838243 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mesa_pktgyro_test.so.debug 100644 root:root 8d6f6e3cbf6dc94cd284e4f1480bb141 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mesa_uart.so.debug 100644 root:root e6932b8c897f7a36dc3e456de3e96e24 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/message.so.debug 100644 root:root 459b17658e2d2a8af0f25b8fde747516 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/millturn.so.debug 100644 root:root 40bd76c4479217e62924c2c560a46e5a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/minmax.so.debug 100644 root:root 59b5adffb52ee21228ad714afd47a96b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/modmath.so.debug 100644 root:root 8e040a750cf91785a5f3fa2b553f32e4 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/motmod.so.debug 100644 root:root b3dbb485548536bcacfd3faeaae35f8b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/moveoff.so.debug 100644 root:root 1ce487dd00e8add16ccda1639f9b3bfa -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mult2.so.debug 100644 root:root 5d44249e371d8c81637747bee9199cab -File: /usr/lib/debug/usr/lib/linuxcnc/modules/multiclick.so.debug 100644 root:root e7fcf9374c027d862028e7cc3bbeb794 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/multiswitch.so.debug 100644 root:root 0b0c533e8bda0a1241a9941f9145c6b7 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux16.so.debug 100644 root:root 77ef7def68cefca0a88dbda35ac40be6 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux2.so.debug 100644 root:root 9548cb7591444c8998e5ca366fb916ac -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux4.so.debug 100644 root:root bc781b316cea0aeffbef4f26d470c79c -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux8.so.debug 100644 root:root d4d2535e61481531fa7f621f79ef6322 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux_generic.so.debug 100644 root:root c2be802e98fe96484c6ddcba4a9027e1 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/near.so.debug 100644 root:root a75e30812f05917ac24a306cad45862b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/not.so.debug 100644 root:root cd4de7647627d912c047af6a5e6545d2 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/offset.so.debug 100644 root:root 5c03c2353093f7e1d518e9b838308605 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/ohmic.so.debug 100644 root:root 7eb757abc48bec1c98523413a1dbab1b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/oneshot.so.debug 100644 root:root 9b4ddeb7a016aeb9cd94bea0dce7aef2 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/or2.so.debug 100644 root:root 9255fbb85d71899c54f001174f0f29fd -File: /usr/lib/debug/usr/lib/linuxcnc/modules/orient.so.debug 100644 root:root 592cd7b7ee0f7c3b800d515e3dfb8e6e -File: /usr/lib/debug/usr/lib/linuxcnc/modules/pentakins.so.debug 100644 root:root 4c5cf440f842c8da9d4432f6cdbd585b -File: /usr/lib/debug/usr/lib/linuxcnc/modules/pid.so.debug 100644 root:root a6219fb361b510846be6b70d206c6d0d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/plasmac.so.debug 100644 root:root 410ebe07e3a2176ca63d027fcdc9caf1 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/pumakins.so.debug 100644 root:root d3d5e76ec355b2f480db6fbcc8faf5a2 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mesa_7i65.so.debug 100644 root:root 327e6ab8ea551e76eee46d5be7cfe813 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mesa_pktgyro_test.so.debug 100644 root:root 9a405e2a74272fe58523ecda1d46cf04 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mesa_uart.so.debug 100644 root:root ebf679b3654fe643d305127a2d0b8448 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/message.so.debug 100644 root:root fb6f68c245514fc333b73da53b1108e5 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/millturn.so.debug 100644 root:root 3097bc0f48b15f2eed333cacf3212ae8 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/minmax.so.debug 100644 root:root 3ed6dd13fe4da832526c0aa9af00e1ae +File: /usr/lib/debug/usr/lib/linuxcnc/modules/modmath.so.debug 100644 root:root 717b8cbc546f6400512ea111d2636ce1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/motmod.so.debug 100644 root:root 1851f2c50a83a7805dafe384ddd2ed15 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/moveoff.so.debug 100644 root:root be3f6b8ec0767ef78f8b91cff35c0c60 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mult2.so.debug 100644 root:root 3e80b803a8c588f2d85fe1025088188f +File: /usr/lib/debug/usr/lib/linuxcnc/modules/multiclick.so.debug 100644 root:root 6944fceaf9f53626258ca6316f8629c0 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/multiswitch.so.debug 100644 root:root e4a453b4e0fec45e87ca161b1b79b350 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux16.so.debug 100644 root:root cc981d52c01c169f594822720f488fae +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux2.so.debug 100644 root:root 5bee758a84320857f60f44b4376183e2 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux4.so.debug 100644 root:root b4c71f6fc59c8f1328832c305a7ca54b +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux8.so.debug 100644 root:root 97fd3ad752cccab7dbafbbae1bd2e6b4 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/mux_generic.so.debug 100644 root:root 8336ec2fdb3be1a31b649541e4f2ff14 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/near.so.debug 100644 root:root bff43ab1e20df38d49152ea09739b96b +File: /usr/lib/debug/usr/lib/linuxcnc/modules/not.so.debug 100644 root:root 7d251563aded3e178066686164ce3475 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/offset.so.debug 100644 root:root 57dad1d208b416faeaec2e908fad6a87 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/ohmic.so.debug 100644 root:root 8be3abe0c829100945ba138e86c31759 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/oneshot.so.debug 100644 root:root 924332837449a99c643f9c2791f8d136 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/or2.so.debug 100644 root:root eb31c9c2386d5c35ca691ce6258e1f2b +File: /usr/lib/debug/usr/lib/linuxcnc/modules/orient.so.debug 100644 root:root 3de09c980f25256e62bc9ef46fc40e22 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/pentakins.so.debug 100644 root:root 71e573999e175675ddb60ff69c557354 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/pid.so.debug 100644 root:root 5123f7113abe352169bf2e0327591297 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/plasmac.so.debug 100644 root:root 02e6ac0728b0d4167d7d83343e9ceead +File: /usr/lib/debug/usr/lib/linuxcnc/modules/pumakins.so.debug 100644 root:root eb665845b01539109de3c68bcf18cb60 File: /usr/lib/debug/usr/lib/linuxcnc/modules/pwmgen.so.debug 100644 root:root 792f97904092c92312eb46189e56c5ad File: /usr/lib/debug/usr/lib/linuxcnc/modules/rosekins.so.debug 100644 root:root c44e7d0889a366f67fcf9ceb02faec48 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/rotarydeltakins.so.debug 100644 root:root 478c793333f3341a817879cd8bb0ee71 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/rotarydeltakins.so.debug 100644 root:root 15aa4945e13522e110a6357e91d4fb7e File: /usr/lib/debug/usr/lib/linuxcnc/modules/rotatekins.so.debug 100644 root:root a3865f68c5716bda457f4429295ac100 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sample_hold.so.debug 100644 root:root 63ecee967997bf7c2166bed4513cb599 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sampler.so.debug 100644 root:root bb656763ca7cc97a22d2d757526b58b1 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/scale.so.debug 100644 root:root 98d35d164a1c8a0ae324bc576eb4ae95 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/scaled_s32_sums.so.debug 100644 root:root 45ba94d700a29a3532d597296d5447a9 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/scarakins.so.debug 100644 root:root d0a13becab861a86e66c0b69f9011eaa -File: /usr/lib/debug/usr/lib/linuxcnc/modules/scope_rt.so.debug 100644 root:root b668ea1361f1134b5eaf3485202a9e38 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sample_hold.so.debug 100644 root:root e5d7a4b4141437a54b0e0cd255a7c66d +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sampler.so.debug 100644 root:root ce68a7f707950258a52625abe6dc7846 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/scale.so.debug 100644 root:root ff764733ac7729bd8bd3142935e3c1d0 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/scaled_s32_sums.so.debug 100644 root:root 5ce00ccf0d6ca9045dd84a9445394a4b +File: /usr/lib/debug/usr/lib/linuxcnc/modules/scarakins.so.debug 100644 root:root 61f07f6bbc32de179923572c8aeb523f +File: /usr/lib/debug/usr/lib/linuxcnc/modules/scope_rt.so.debug 100644 root:root c4a5079105004595a60b8feaaffbeb39 File: /usr/lib/debug/usr/lib/linuxcnc/modules/scorbot-kins.so.debug 100644 root:root 55e85cbb1892b653b0cb4d0bbd3a290c -File: /usr/lib/debug/usr/lib/linuxcnc/modules/select8.so.debug 100644 root:root 234a93cfa425612378c8f0d026106bd8 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/serport.so.debug 100644 root:root 6d58a55ce6e2114a3764d736ebc57324 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/setsserial.so.debug 100644 root:root a87e229154ce898e85fc74bd11413871 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/siggen.so.debug 100644 root:root a097ad596e7f423c11d6a33c47330939 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_axis_hardware.so.debug 100644 root:root 299e1ef995aee9dd6891a8c0e4843e64 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_encoder.so.debug 100644 root:root cabfa3e8f4fa71d4477aeaace28724f6 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_home_switch.so.debug 100644 root:root 679d36eef9e077551678d281cb3200a9 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_matrix_kb.so.debug 100644 root:root 583e77fec792338fdbac5ffcf73bd3b1 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_parport.so.debug 100644 root:root af69164f9b04ce837b78bbaa14167ccb -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_spindle.so.debug 100644 root:root 3b24826616e464aa0a12423c664cd486 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/simple_tp.so.debug 100644 root:root aedb5c98fb73486b709436a873a8e433 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sphereprobe.so.debug 100644 root:root 2be34889ab1e6a039c93d938c069661c -File: /usr/lib/debug/usr/lib/linuxcnc/modules/spindle.so.debug 100644 root:root b0383293af4a2565500769886acb4830 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/spindle_monitor.so.debug 100644 root:root f00fed8a859a8301eb18e5ed64d0d20e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/select8.so.debug 100644 root:root 435679f6ab57bf66a4f1088030888486 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/serport.so.debug 100644 root:root c5bfe6e149d54fe332cc89db55831570 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/setsserial.so.debug 100644 root:root 978fa81d8de535b0b48a3807b74bbc61 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/siggen.so.debug 100644 root:root 0ed77152c7688c7eab1071eba4d3f2d9 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_axis_hardware.so.debug 100644 root:root 826e5980e30de88bef20e92c4a90fd4f +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_encoder.so.debug 100644 root:root 7131fbc3917e8cbbd10f62f429d41832 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_home_switch.so.debug 100644 root:root 785974d80f7e791fc1d34f21e81340cc +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_matrix_kb.so.debug 100644 root:root 756d4b27f0f51d4a6a1ad12f31b61371 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_parport.so.debug 100644 root:root 6f3af0c3b695ae745ac3a3b37e750b2e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sim_spindle.so.debug 100644 root:root 5279c878476445780be1d46e743919d0 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/simple_tp.so.debug 100644 root:root 8f08f08235dbfae00bd07ab163e3afca +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sphereprobe.so.debug 100644 root:root 78c0b2bf4010fcb38e1ac6fb392053e9 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/spindle.so.debug 100644 root:root 3fe8260a288b5b69dcb2be986efcc471 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/spindle_monitor.so.debug 100644 root:root bad5453c453d82212e8d250aefd55bbd File: /usr/lib/debug/usr/lib/linuxcnc/modules/stepgen.so.debug 100644 root:root 17c609be69a241ecb4da9f6301bf16c3 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/steptest.so.debug 100644 root:root 9984e5e5066522dabe6010a3e4444428 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/streamer.so.debug 100644 root:root b4fc8c4386058183ffb5cbb5c537e053 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/sum2.so.debug 100644 root:root 1b178d2738d6b3a915bbd8a1236c047d -File: /usr/lib/debug/usr/lib/linuxcnc/modules/supply.so.debug 100644 root:root 69448a6255b2dc211a40eea569648d19 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/thc.so.debug 100644 root:root 3164d26f3c18d155b2f366277369ea04 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/thcud.so.debug 100644 root:root 798281e38d8e2901fbd87143558671e0 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/steptest.so.debug 100644 root:root e4c584c47543135504f67946b5f8d99c +File: /usr/lib/debug/usr/lib/linuxcnc/modules/streamer.so.debug 100644 root:root 9d5b4e8a62f6b4fd95f501d80c3174f3 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/sum2.so.debug 100644 root:root 0cda15e35d81d9fbef7a0e98d3257ae1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/supply.so.debug 100644 root:root 417a94380110b1cada653ed3812562cc +File: /usr/lib/debug/usr/lib/linuxcnc/modules/thc.so.debug 100644 root:root 156b0e7f8875b85bc35807e3d0576544 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/thcud.so.debug 100644 root:root e0463da413eb0475f22335a27e3f3e45 File: /usr/lib/debug/usr/lib/linuxcnc/modules/threads.so.debug 100644 root:root bc97cadd6415d83172dbfc9b9f0688b0 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/threadtest.so.debug 100644 root:root 38fd47c36ba60337ef36a2ed2ccc867a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/time.so.debug 100644 root:root ec7cfed97986c8eb17a1fa6c8442f078 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/timedelay.so.debug 100644 root:root b744c0803273690de5fe7a5dc4635743 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/timedelta.so.debug 100644 root:root 362eae9f67ed5807a3040b38369807f7 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/tof.so.debug 100644 root:root 8efd551b3b3b0c15fd163881c64fb877 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/toggle.so.debug 100644 root:root 0250fa71a07fb4d9b232a5a216f2645c -File: /usr/lib/debug/usr/lib/linuxcnc/modules/toggle2nist.so.debug 100644 root:root 0acb4bbdb10617959d999fd2e8db0c68 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/ton.so.debug 100644 root:root f83c2f7da86ad87039a73e880e0979c0 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/tp.so.debug 100644 root:root 5c4809dd9b2f1a0cea4d0549268a460a -File: /usr/lib/debug/usr/lib/linuxcnc/modules/tpmod.so.debug 100644 root:root 290923221a07a2944ee15d5adcfac332 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/threadtest.so.debug 100644 root:root 4bf977ba58bd70688f1488eb6af10ba7 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/time.so.debug 100644 root:root 8ae75a4ed3df5a4bf361984a88d467f1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/timedelay.so.debug 100644 root:root e602c2844afcfdf52e2299b6a3731e32 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/timedelta.so.debug 100644 root:root 3fb5b1be77dace47e19281c5a9af47af +File: /usr/lib/debug/usr/lib/linuxcnc/modules/tof.so.debug 100644 root:root a0bd1de343e4d7915b8681917efd11b1 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/toggle.so.debug 100644 root:root 607996521e2c351d1d43e486a71e8b5a +File: /usr/lib/debug/usr/lib/linuxcnc/modules/toggle2nist.so.debug 100644 root:root dfb967b64cef9fbbeb496d3bfd386268 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/ton.so.debug 100644 root:root 527af16b27c2fb9d0604be3959f51dd2 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/tp.so.debug 100644 root:root d56335620bd134139a58a93e9f761853 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/tpmod.so.debug 100644 root:root d33fa8996554326055b6aaf2acc9f896 File: /usr/lib/debug/usr/lib/linuxcnc/modules/tripodkins.so.debug 100644 root:root b96cbabfec8d4e850d692470a890a903 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/tristate_bit.so.debug 100644 root:root ba4dafcc4ad968a40d0a8288ac7f5c81 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/tristate_float.so.debug 100644 root:root fa41b9be338df8299b69b53cbfb4e393 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/trivkins.so.debug 100644 root:root df336410757fb7ccf9484465fced3094 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/updown.so.debug 100644 root:root e5c4cab30ac28f3bbc8219a12edb576c -File: /usr/lib/debug/usr/lib/linuxcnc/modules/userkins.so.debug 100644 root:root 240fc966a25cca7a3145ee0444bc2eef +File: /usr/lib/debug/usr/lib/linuxcnc/modules/tristate_bit.so.debug 100644 root:root 376cf96268c296946f03472bcb09e6b3 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/tristate_float.so.debug 100644 root:root 0669197ea9bf24028586ad7d922c9bc3 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/trivkins.so.debug 100644 root:root abaf080524de0940822a7d86068e2f2d +File: /usr/lib/debug/usr/lib/linuxcnc/modules/updown.so.debug 100644 root:root 42223660e6040ecbe12b51cd3917319e +File: /usr/lib/debug/usr/lib/linuxcnc/modules/userkins.so.debug 100644 root:root 759d6cbb5f8f44f116f95d6d8476da79 File: /usr/lib/debug/usr/lib/linuxcnc/modules/watchdog.so.debug 100644 root:root 8609cd958f0ebc6c33e40d1d340dd8ac -File: /usr/lib/debug/usr/lib/linuxcnc/modules/wcomp.so.debug 100644 root:root cc6762636b3c42d388510466fb8ea685 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/weighted_sum.so.debug 100644 root:root 8eb708b26e5a1a480dff1ad72969b7a5 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/xhc_hb04_util.so.debug 100644 root:root 6edd63871728799e7e10fd5e175b24e2 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/xor2.so.debug 100644 root:root 3e4cf82e6ff773c7f057d9fdff1bb602 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/xyzab_tdr_kins.so.debug 100644 root:root 6ef4115363911910426886a70e1e3e72 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/xyzac-trt-kins.so.debug 100644 root:root 7cb3dfe3cb0340bb9b976d3c3b7f8379 -File: /usr/lib/debug/usr/lib/linuxcnc/modules/xyzbc-trt-kins.so.debug 100644 root:root 1da2a29328efc16b71a489f99e755660 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/wcomp.so.debug 100644 root:root fbccc12a80b2491f6e16368086c81282 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/weighted_sum.so.debug 100644 root:root 58d04fb3d73c93e53ba2c09228416dd8 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/xhc_hb04_util.so.debug 100644 root:root 488f3064017a141c055234dc41fb8701 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/xor2.so.debug 100644 root:root 2d401516f199f8b0a31fac8ddece3e3d +File: /usr/lib/debug/usr/lib/linuxcnc/modules/xyzab_tdr_kins.so.debug 100644 root:root 5b5e24fb4c2634d47b2143370a404de7 +File: /usr/lib/debug/usr/lib/linuxcnc/modules/xyzac-trt-kins.so.debug 100644 root:root 50cebaf96f33692a24c19c300514aecb +File: /usr/lib/debug/usr/lib/linuxcnc/modules/xyzbc-trt-kins.so.debug 100644 root:root 73ad1c1f9794ad5a626dddbbc719d415 File: /usr/lib/debug/usr/lib/python3 40755 root:root File: /usr/lib/debug/usr/lib/python3/site-packages 40755 root:root -File: /usr/lib/debug/usr/lib/python3/site-packages/_hal.so.debug 100644 root:root 602cc85ae062966d0e2a399906f074ac -File: /usr/lib/debug/usr/lib/python3/site-packages/_togl.so.debug 100644 root:root 62b3d25a4e44cbec74094d2ea3991f74 -File: /usr/lib/debug/usr/lib/python3/site-packages/gcode.so.debug 100644 root:root e466f6156ebcce68f8fa4bed99b651e4 -File: /usr/lib/debug/usr/lib/python3/site-packages/lineardeltakins.so.debug 100644 root:root e0a19d99a923db28c4c38323c58b9de8 -File: /usr/lib/debug/usr/lib/python3/site-packages/linuxcnc.so.debug 100644 root:root eb6e807bbcc1e42fc29133217d7f2878 -File: /usr/lib/debug/usr/lib/python3/site-packages/rotarydeltakins.so.debug 100644 root:root 8df93b0abe7b86a9f1b2a2b9589c07d8 +File: /usr/lib/debug/usr/lib/python3/site-packages/_hal.so.debug 100644 root:root fdaa69dfae02e07d317ef6b51d533414 +File: /usr/lib/debug/usr/lib/python3/site-packages/_togl.so.debug 100644 root:root b3a51df0ee3f1896bde9268c2e4d653a +File: /usr/lib/debug/usr/lib/python3/site-packages/gcode.so.debug 100644 root:root 61441c21a84c837593041e927ae4524f +File: /usr/lib/debug/usr/lib/python3/site-packages/lineardeltakins.so.debug 100644 root:root aee7ea084d1d3b2c9f2c9385b3f463f9 +File: /usr/lib/debug/usr/lib/python3/site-packages/linuxcnc.so.debug 100644 root:root c6b76c74d7e94cab7bed35bff9744ae6 +File: /usr/lib/debug/usr/lib/python3/site-packages/rotarydeltakins.so.debug 100644 root:root a90365c97097bd29af512e6ed0fe179e File: /usr/lib/debug/usr/lib/tcl 40755 root:root File: /usr/lib/debug/usr/lib/tcl/linuxcnc 40755 root:root -File: /usr/lib/debug/usr/lib/tcl/linuxcnc/hal.so.debug 100644 root:root 93f309c3bcab34c64ecd403331e7df7f -File: /usr/lib/debug/usr/lib/tcl/linuxcnc/linuxcnc.so.debug 100644 root:root 8a3f6ea6692c9d6e154f600941894615 +File: /usr/lib/debug/usr/lib/tcl/linuxcnc/hal.so.debug 100644 root:root 77e70f7f7dfaf2b1701b1fb172eece04 +File: /usr/lib/debug/usr/lib/tcl/linuxcnc/linuxcnc.so.debug 100644 root:root 60117124cf765012b784acfd6d7da1b2 File: /usr/src/debug/linuxcnc-2.9.2 40755 root:root @@ -2840,3 +2826,3 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root cb3eeeed9d74a160c1abf1aab71bd34f +File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 17692ffc1ee259c3bf9332d61bf340f6 File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/pi500_vfd/pi500_vfd.comp 100644 root:root 36db960cdfb47870d04dc0825e67fbe5 @@ -2851,3 +2837,3 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root dcf0ef4ed5c8c1f87521e318a54711ed +File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root 03b4059d677661aa023d6b3b3cc1b3c0 File: /usr/src/debug/linuxcnc-2.9.2/src/hal/user_comps/wj200_vfd/wj200_vfd.comp 100644 root:root 59df738983b6701d52519fdd79609b2f @@ -2898,127 +2884,127 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs.c 100644 root:root 5cfceb8f8aac7f2d36d5461b74413798 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs_s32.c 100644 root:root f64765ea98efd153d22b066442eb66bc -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/and2.c 100644 root:root fc7465f6de2ceb2569cbada53fa7f598 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/anglejog.c 100644 root:root 354dae5571a8b53b57cd100ebc3f15c1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/axistest.c 100644 root:root 9600b321f84d53c43e0fd619e6f7a6f0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bin2gray.c 100644 root:root 39ac132b661586780f26d86f3c6e71d8 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/biquad.c 100644 root:root ad94ad263478e0a649cea9c2f39e043b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitslice.c 100644 root:root 83562147a1e16a07eae4c50b02cb8d8b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitwise.c 100644 root:root 19ed3bbeb3ce67d6b1dec0e2a8acfd5c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bldc.c 100644 root:root f106e3bf3f72841b392711550410f4e6 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/blend.c 100644 root:root d6d7f52fea5a27211c198bd7c2b455b0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/carousel.c 100644 root:root 4069313ba8e9be8458af1d251f815725 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/charge_pump.c 100644 root:root 7110535d89fe9f15c3265a1ec1188dc4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke2.c 100644 root:root 8082f87efad979e1782f731a54ea855c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke3.c 100644 root:root 61f1d4c16722d9892f68b64042fb809e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarkeinv.c 100644 root:root a82395bbc6265364bbbc563967274a89 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/comp.c 100644 root:root 2d6ffda27a0d1e899a66252ed9091f4d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/constant.c 100644 root:root 1868595abce6f657feba8d8174cea481 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_float.c 100644 root:root fb86774e3e22193f8de507596fc9a8ce -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_s32.c 100644 root:root 46ce4f05a3b7fca76dc1eb01da3d15fe -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_u32.c 100644 root:root 02a57a63a99b16f78d45e7d566777877 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_s32.c 100644 root:root 626a463bb0041e5092708af1717cd94d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_u32.c 100644 root:root d8998acbea5688d4689c988dc91bcfa1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_bit.c 100644 root:root 4294d2921a97d28f22d6e1de5592e2cd -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_float.c 100644 root:root 39156f3d945352e79e77dbb396728bcb -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_u32.c 100644 root:root 9a81233a6c9094bc93dd4fbe2af96a6c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_bit.c 100644 root:root 8c0bf9e8ab1f2deb6145b82bab1c63e4 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_float.c 100644 root:root bfb3e0838fde7e563a81baafebe2462a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_s32.c 100644 root:root 7d5347bec71d6f8467a618e41d3b3fff -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/corexy_by_hal.c 100644 root:root 4e9266e5ce4992b7c7f081ca6adb22b1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/dbounce.c 100644 root:root d045e70d7f03b215f936ee2c2f1ac32f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ddt.c 100644 root:root f1eda8582e8c04b10e6b9afc75a98073 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/deadzone.c 100644 root:root 2d9f8560562b2c3b61e054c9dfa5c1a3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/demux.c 100644 root:root deed16d67cd15468fc1e7524c3de62e9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/differential.c 100644 root:root 72cf8c4b4105fb43d1bafca94cee230c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/div2.c 100644 root:root bbaf86b3079940c6e7ac7a9fa0de1172 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/edge.c 100644 root:root 49ae2941c995362c1cad2121b34d10e0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/eoffset_per_angle.c 100644 root:root 6a826b92a426c57e6453291678096904 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/estop_latch.c 100644 root:root 84e885965962aa08b3ef5cf39c599182 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/feedcomp.c 100644 root:root ff5f4da38e8c2bd8ebcfae6a6c446ee1 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/filter_kalman.c 100644 root:root c49b51ac4c952f2a3870788951eb5d54 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/flipflop.c 100644 root:root 4c442243d7481d5fe4aa34e53354f6a7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gantry.c 100644 root:root 3b99096553bddfed1d9fb286e5a3eac2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gearchange.c 100644 root:root a2d50bf5769c8ee833639a0b90addabc -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gray2bin.c 100644 root:root ef72f7622f47d82765bf57fe87636a6e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/histobins.c 100644 root:root 5f11bb88468ad8ef14c3ae8ec410a23f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/homecomp.c 100644 root:root 67930eaa15074c7a2c86685df961ec8b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/hypot.c 100644 root:root 51f8d03aa43065462cae557845d8e67c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ilowpass.c 100644 root:root a271fe5667ccde446950e3aa6254b7da -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/integ.c 100644 root:root e67e8ddd38dd3a841d14d94d2c0ebd1d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/invert.c 100644 root:root 2fa9297ce9c1667d63d39c5922c511d7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/joyhandle.c 100644 root:root e0eb6c9e00d3a61af08dc8e4db49320d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/knob2float.c 100644 root:root f3f89d6035f7a4d929fb8ab41c47e40b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/latencybins.c 100644 root:root 3f2a872dcec64b20c42793c952c4223b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit1.c 100644 root:root e1c065c9682697d57e0b274eee195176 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit2.c 100644 root:root 19e1b43fadad1607c1aae58550d3718f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit3.c 100644 root:root c135c211d93984ccc4260a42c9e35a5a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit_axis.c 100644 root:root 25db57ccda081933e279e845e6862a47 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lincurve.c 100644 root:root 7eedb72fb233c63cb1b0cc175d5cb552 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/logic.c 100644 root:root 7b607ff9d9c51788a31d64bd2ce90098 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lowpass.c 100644 root:root ceba294286bca3a42fa02ba0a5dc6409 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lut5.c 100644 root:root 3c85539f919ba9cc8ce4962b7077dd32 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/maj3.c 100644 root:root 52943bbeed8cbdd3cce3ec7c3ed6965b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/match8.c 100644 root:root 712276e53530a648ad1abb9d6fe57c2b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/max31855.c 100644 root:root 81e9d59596100cc834bb76c24e629350 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 8bb47306170248dde4286b073c7e5703 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/message.c 100644 root:root f66fa52acc06036c25dbd12f35647bb9 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/millturn.c 100644 root:root cb492eb56701312aa484a6a780844039 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/minmax.c 100644 root:root 74ef272163c21b8c728d6894c978e90b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/moveoff.c 100644 root:root 23c67ff25686dd4b1c2e036ccf54f404 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mult2.c 100644 root:root b56dbc27a01fde247698cb8b7da559de -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiclick.c 100644 root:root b6e79e2ac08ad6d27f56242b308d7968 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiswitch.c 100644 root:root fbe0f42fbe7470541b52c0936cdf3897 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux16.c 100644 root:root a59c3a5182795db03924654848715f84 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux2.c 100644 root:root 465c117015e8e72257205c2e77b7f12c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux4.c 100644 root:root 4650fcbcf30799a4693a293a28cf0b5b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux8.c 100644 root:root b464c7d0fcf456fa18bbe51b0e229485 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/near.c 100644 root:root fb8da642948c79cafb9c68617f5eb0ea -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/not.c 100644 root:root d8475cdb41e5b9a3bfa9ae0008ce9ef7 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/offset.c 100644 root:root ddf1539e26c9fe2bbb5c4204641371f3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ohmic.c 100644 root:root 9b06e283ced995a22e7729fc09aa2a88 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/oneshot.c 100644 root:root ddef6929abfca8ab76317be31324339e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/or2.c 100644 root:root 056c1488ede9e137148ed2c0203a0f44 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/orient.c 100644 root:root c89766d2888b3fc8b000f193754f7e58 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/plasmac.c 100644 root:root f6b2a412436a634317f05dbc2f965d70 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sample_hold.c 100644 root:root 8cffa9a2730dcd5629d6f8510cbeece5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scale.c 100644 root:root 3975feff71de1be3a759190ca30332fe -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scaled_s32_sums.c 100644 root:root a973c17a442ac89c18c47dcfc0b1f23c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/select8.c 100644 root:root eb93d72dd7d734e0ca5ce500f2b1e606 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_axis_hardware.c 100644 root:root e0b1fe01dcbc37611e948d46c581745f -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_home_switch.c 100644 root:root 27dd56cfc8141c28f569081bc50d4519 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_matrix_kb.c 100644 root:root c4231c9943efde47991b23ef555d9151 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_parport.c 100644 root:root 499af9e7bc9dc23fce9e635716fe79a3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_spindle.c 100644 root:root a099f584715bfecd8feedb2a8c47d27c -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/simple_tp.c 100644 root:root 2b3c21488b310cac9cc93337368c280b -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sphereprobe.c 100644 root:root 1276a96b2f16761de44ad3e66cfc3456 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle.c 100644 root:root b15f04626f788fce00041b7372e45acd -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle_monitor.c 100644 root:root db339131eb0c7a7d37e8503760df8501 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/steptest.c 100644 root:root 4e4b5e24fa10acd2a5171439d5f7b9b0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sum2.c 100644 root:root bae13115d30f73463b28ec26c6863a8e -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thc.c 100644 root:root 3dfda570290c2717bed88419664a8b05 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thcud.c 100644 root:root cc657a76e7bd5a4558b9585839219467 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/threadtest.c 100644 root:root 2f43a91e7b84be96db81c85b0560633d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/time.c 100644 root:root b26cb03e921471003c05102356ba36b3 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelay.c 100644 root:root a2d2c887aae176b021d567dd68447a06 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelta.c 100644 root:root 44b705b347fcec779e68fdd1c245ddf2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tof.c 100644 root:root 0019cb05340605c33023bbe9cc9b2a6d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle.c 100644 root:root 2c3efe407da3e90b4a3aa3c1055b30a5 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle2nist.c 100644 root:root 08db114e0dcc83f4877b2f2b7ec54ee0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ton.c 100644 root:root fea235d49306230f9a051ac060e18352 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tp.c 100644 root:root 5329e8b90860f9489a36f2b7b3ff62b2 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_bit.c 100644 root:root a77d040f3fd2f6e9f7cafcac67dc7c72 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_float.c 100644 root:root a5d7f58d21d4b763dfc381680e93a007 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/updown.c 100644 root:root 3fec6c6870cc65645f42f9c53a6cd24a -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/userkins.c 100644 root:root be2d9ee3ffdecd158befa1c6bf79d2c0 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/wcomp.c 100644 root:root 02516134c6fc27ce9e2252348107664d -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xhc_hb04_util.c 100644 root:root de0c19100734e5c49c377d7df3b709da -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xor2.c 100644 root:root ed98103d14f1638bf8c10e875c4b45ce -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 92f8df273380c93944c2fbc16a74e3bb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs.c 100644 root:root a16a6197e1a739ff14355132abee6fb8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/abs_s32.c 100644 root:root fd6845bc564dc6520b7e9a8e78a3a871 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/and2.c 100644 root:root 0c18b3292653ec56e953d6c96d395967 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/anglejog.c 100644 root:root 7b9e5ead98365e1391bc74b4984737d1 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/axistest.c 100644 root:root 233595eaf1b64f8eb857bd48558456a6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bin2gray.c 100644 root:root f3bf0257aa1cd8b9f6d9bb48a628d273 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/biquad.c 100644 root:root 650d659fabf30f9cf3e0e43d233636ea +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitslice.c 100644 root:root afe67427b3c43cbded1a1720f8af9bce +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bitwise.c 100644 root:root f6db83953d736c88cd560fa53c479b74 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/bldc.c 100644 root:root 10ac1e5336c0a4378cdea009fbc2ec65 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/blend.c 100644 root:root 5d8e313bba8b5bfab873572b49deaadb +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/carousel.c 100644 root:root fca3a6f2ff946ec4ca9995bb328683b3 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/charge_pump.c 100644 root:root 7c6ea025552d669fdc9fc6de3593ba55 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke2.c 100644 root:root 1c71b2782b16b20914a3be5496e15cf7 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarke3.c 100644 root:root e79b981fa0cac3ee80df6bd6f6694c36 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/clarkeinv.c 100644 root:root 41c7f8719d8d9200ece1c634cf09b2b0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/comp.c 100644 root:root bc6c5f3bcde83a3be41663652f789be7 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/constant.c 100644 root:root 88ac68c7a7273725bb56e7c9fd3cec7d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_float.c 100644 root:root 03e5df025f59586c30bf1bbf551d592f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_s32.c 100644 root:root c575580ae5da6f23918293de757136e7 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_bit_u32.c 100644 root:root 62b8ecdfab88c309ccd9f4fee76acd4e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_s32.c 100644 root:root b350106c0dc641bded1271492899c0a2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_float_u32.c 100644 root:root cea88b464d430bed9bbba737c4f7f46e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_bit.c 100644 root:root 4a6427a51c4bc3bd119e8c2aee95458b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_float.c 100644 root:root 1b2e0c5652c80ce061fc37490aca4e70 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_s32_u32.c 100644 root:root 0dd0c977877eef2879d0aec7e5da2a8a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_bit.c 100644 root:root df71533d5dd97b0a02693bab69099cf8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_float.c 100644 root:root a8ebb6829cc476f7699eb513297cc6ee +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/conv_u32_s32.c 100644 root:root 6ae4f2353619c432419483b87b0d47f5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/corexy_by_hal.c 100644 root:root 5aaf5ff61483c74d39547490653e3fae +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/dbounce.c 100644 root:root f890b46b3a7f4791a649142c728d9d64 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ddt.c 100644 root:root aa809773972b32e84b3fbe7c203bccca +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/deadzone.c 100644 root:root a85844631761197d8f1a0a49dc18d027 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/demux.c 100644 root:root 8fe5815524034fe5cb74bb68be755a65 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/differential.c 100644 root:root acf1d7d8bd7847d0393599983f469e9a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/div2.c 100644 root:root 284965680d5e7fd450ba89277357386b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/edge.c 100644 root:root 3d2dabd396dbaee9f12b5fc7dc2c1e4d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/eoffset_per_angle.c 100644 root:root a099265a4f6dd9c19501c0ffa18f9b57 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/estop_latch.c 100644 root:root ee71e10247680739c6cf8051bb30a829 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/feedcomp.c 100644 root:root f72bdd445f75af3fa0cb5da81bb8e9c4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/filter_kalman.c 100644 root:root d984eaef15a958727bd896430256e5ad +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/flipflop.c 100644 root:root 657079596334d5670044deaf9ef23b81 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gantry.c 100644 root:root ef3bceedf7c4337274a0092910bc5776 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gearchange.c 100644 root:root 70e20867de891fea19874a11e1c7bb87 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/gray2bin.c 100644 root:root 8a2a2c22f0ec12262dc9345d9dfe02a6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/histobins.c 100644 root:root c811adaff986d612e129ba22bc8a1268 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/homecomp.c 100644 root:root 19060dab0b706e90515bf218da27abe7 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/hypot.c 100644 root:root 27ebdbf3e1a5ce5c57c9022ef1da33b8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ilowpass.c 100644 root:root 61222fc6c0e841064057c675fe98d9f8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/integ.c 100644 root:root 37c08bccc11b035a015e85b17befe999 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/invert.c 100644 root:root 62cfd51b5cb8965d8f3bfcc201cffebc +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/joyhandle.c 100644 root:root 25ac16c35d1de3fc8a2f9917c8d4e687 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/knob2float.c 100644 root:root cfdb6dcabdd5dd155fddc60c2fad0810 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/latencybins.c 100644 root:root 5959b280ca05df77b953ed84bd49c752 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit1.c 100644 root:root 2e285da4b8ac21dc1fee406ae56ae44f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit2.c 100644 root:root a542ff1226e5c74e7f3c250a1d0ed7f0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit3.c 100644 root:root cede5ff75960cd2c20e6074c6e1af3f1 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/limit_axis.c 100644 root:root 5ebd1003bca92e4ee3fa3016bb8dd35d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lincurve.c 100644 root:root 6bd107e814e85bbcc322909ab25defa9 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/logic.c 100644 root:root 347d83400f866e400ad1ded817e7cdfc +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lowpass.c 100644 root:root 383fb4e0a098e6c323e56312d7fb6bf6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/lut5.c 100644 root:root 5e5547d19e6a0b4dad90296e46c7c4fa +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/maj3.c 100644 root:root f36bf4f88cb574218f632ecd0a75523a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/match8.c 100644 root:root 87c6a98226800e2635a458688bd1c0e0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/max31855.c 100644 root:root 0406c9cb22b53680ebe246e778305a7a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 15f7eb4b6d7f9aa90ba74d578a089634 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/message.c 100644 root:root ac2c45dc33708cedf29d58108ac938d1 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/millturn.c 100644 root:root 78a4bf0aa76bd88e1cad467f2bbd5054 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/minmax.c 100644 root:root 97e8ada74cbd0f47fc04f4a656b94321 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/moveoff.c 100644 root:root b5d4860d1792a17565f4b9924dfc3389 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mult2.c 100644 root:root 26c0988add8ed589163bd0ef039d744a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiclick.c 100644 root:root b415531a8f9d524fee6187d8877e4153 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/multiswitch.c 100644 root:root e062385c560b7b768b4c617b8bc8a387 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux16.c 100644 root:root 627f06c66b3496990690d759d7d7af40 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux2.c 100644 root:root 484cebb5d290c44b05d054dba7026d7a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux4.c 100644 root:root eeae69cb19defda9be1d2fa45c2ddd28 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/mux8.c 100644 root:root a020b7faa08af3432b3cdfe82c75c880 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/near.c 100644 root:root 81193065b749160c1fc16a2a26bfbcc6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/not.c 100644 root:root d60350535d4e5efe0823273f035b72c8 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/offset.c 100644 root:root d45d26074d50cf8d6623c704cfa17ed5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ohmic.c 100644 root:root c8986e8e0a149993cf99956f0dd60106 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/oneshot.c 100644 root:root 979f97aff9a449e87c5ff1d8a3f692b0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/or2.c 100644 root:root a2a4b2179b0ceb8f7c9b3069be562f3a +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/orient.c 100644 root:root 492ac8750f3ebd2438fc341f54a6ce08 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/plasmac.c 100644 root:root 435b202a2cf68736d86421b475d9fefa +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sample_hold.c 100644 root:root ebbbf07ddae0aebff4ac6915595a5df0 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scale.c 100644 root:root dbd00370c100ef920817e7d374e77ef6 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/scaled_s32_sums.c 100644 root:root a647f60fe558d452b50036cb50e2352f +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/select8.c 100644 root:root 0e6cffdf6ce65265b1d00b937f4bef01 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_axis_hardware.c 100644 root:root 272729357d6de98f51d3538d91db7a1c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_home_switch.c 100644 root:root 1fc2ecfeeb5818e41fd4680fe99bf616 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 61416b0d48eb4d855d26c6dec6909cff +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_parport.c 100644 root:root 8cae1ca5493ebaa89e46d819aa7cf2e2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sim_spindle.c 100644 root:root a1c747334c3c5f456cf618787dcd7480 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/simple_tp.c 100644 root:root 099a6529417a7b02281422ffc7f4f507 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sphereprobe.c 100644 root:root a4dea885c09cb1f106d617287bec04af +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle.c 100644 root:root 3b8e0c796c01012fe8eda36f2a0e16de +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/spindle_monitor.c 100644 root:root d61431dd69358e42e5a971c06cd4404b +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/steptest.c 100644 root:root 3b1ed6f0b3bbbb57a0d67d5dda3f75ef +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/sum2.c 100644 root:root 371d899acb167bddcdfb0fccc774c12e +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thc.c 100644 root:root 91d1f3135d8bc1d227894e86112b1826 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/thcud.c 100644 root:root 66247433590ec2b08d598ad92f4cd9ea +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/threadtest.c 100644 root:root cacfad4cdc9879c94866a21fd04b5189 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/time.c 100644 root:root 622e051a710024884f4aa35dc95e0146 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelay.c 100644 root:root 4eecbf1396580eb7bbcd15383bd50e41 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/timedelta.c 100644 root:root 68a908ca5131d3259640fc845139c51c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tof.c 100644 root:root bffc552f2f251130942f8a57af07a8a5 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle.c 100644 root:root 132c212e6fa076de938185aa73757bd4 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/toggle2nist.c 100644 root:root 980f01fb754214e72939bce08633a912 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/ton.c 100644 root:root 341a2200f7f5561d4a1a534f5856819d +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tp.c 100644 root:root 484885b3fdfda552cfde710cbe97d399 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_bit.c 100644 root:root c3cab5500e7cf77fcbd6d13c5bd8b40c +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/tristate_float.c 100644 root:root 4268de44b9cec9c67592cb7456849769 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/updown.c 100644 root:root 04487bcaa596b50da631f0407944c250 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/userkins.c 100644 root:root e5353d90af9b941f90628b7a81db60e1 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/wcomp.c 100644 root:root f62a6103f7026a01294f43e0a12b1988 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xhc_hb04_util.c 100644 root:root 5458023cf45814d8b07e34b5e077cb44 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xor2.c 100644 root:root 765b724a159ed3123280f070df2c9c76 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 811c9d78c2914458c73110948547eaf9 File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 144cbba87b4b8f4301d607426bd0dcde -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_uart.c 100644 root:root f3c6c6b3fb98e6c70747f09ad3f9ec74 -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/serport.c 100644 root:root bec67302f7bb791c1a8d4c80652b83ab +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_7i65.c 100644 root:root f8f829f9843346d1b49f051d948451d1 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/mesa_uart.c 100644 root:root 3f46fbd615bfe0e02b0ab84f56269a68 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/drivers/serport.c 100644 root:root db76bd792449f140a4bc261e013af9b1 File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps/thermistor.c 100644 root:root 61b5abe73e033febbaa30a27e79250c2 +File: /usr/src/debug/linuxcnc-2.9.2/src/objects/hal/user_comps/thermistor.c 100644 root:root 3d8ad71697c459a7c8614a8941cd320c File: /usr/src/debug/linuxcnc-2.9.2/src/rtapi 40755 root:root @@ -3033,2 +3019,2 @@ File: /usr/src/debug/linuxcnc-2.9.2/src/rtapi/uspace_rtapi_string.c 100644 root:root e93709d53c7b25f0358ac01589652a43 -RPMIdentity: cdfa4927706736cdfb7e659127d8f6e058bee1c7d5e768c46cf91f64116a69ba574b5428605cceebd9ab8f3dbdb7a8b5331f2994f3370a1740b3ecf470a0874a +RPMIdentity: e588e1e65f052ee9e4c7b54108229c9b6c826885daeefa9b3c8532b385dea93b744309d8bbab07006e080c1dbe260d8b5a53ba8fff5adab301a9d8508d7f256f