<86>Oct 14 07:32:32 userdel[284262]: delete user 'rooter' <86>Oct 14 07:32:32 userdel[284262]: removed group 'rooter' owned by 'rooter' <86>Oct 14 07:32:32 userdel[284262]: removed shadow group 'rooter' owned by 'rooter' <86>Oct 14 07:32:32 groupadd[284327]: group added to /etc/group: name=rooter, GID=1220 <86>Oct 14 07:32:32 groupadd[284327]: group added to /etc/gshadow: name=rooter <86>Oct 14 07:32:32 groupadd[284327]: new group: name=rooter, GID=1220 <86>Oct 14 07:32:32 useradd[284383]: new user: name=rooter, UID=1220, GID=1220, home=/root, shell=/bin/bash, from=none <86>Oct 14 07:32:32 userdel[284466]: delete user 'builder' <86>Oct 14 07:32:32 userdel[284466]: removed group 'builder' owned by 'builder' <86>Oct 14 07:32:32 userdel[284466]: removed shadow group 'builder' owned by 'builder' <86>Oct 14 07:32:32 groupadd[284490]: group added to /etc/group: name=builder, GID=1221 <86>Oct 14 07:32:32 groupadd[284490]: group added to /etc/gshadow: name=builder <86>Oct 14 07:32:32 groupadd[284490]: new group: name=builder, GID=1221 <86>Oct 14 07:32:32 useradd[284501]: new user: name=builder, UID=1221, GID=1221, home=/usr/src, shell=/bin/bash, from=none <13>Oct 14 07:32:44 rpmi: libmpdec3-2.5.1-alt3 sisyphus+314490.500.5.1 1675432033 installed <13>Oct 14 07:32:44 rpmi: libgdbm-1.8.3-alt10 sisyphus+278100.1600.1.1 1626059138 installed <13>Oct 14 07:32:44 rpmi: libexpat-2.5.0-alt1 sisyphus+309227.100.1.1 1667075766 installed <13>Oct 14 07:32:44 rpmi: libb2-0.98.1-alt1_1 sisyphus+291614.100.1.1 1638962878 installed <13>Oct 14 07:32:44 rpmi: libp11-kit-1:0.24.1-alt2 sisyphus+324666.100.1.1 1689083450 installed <13>Oct 14 07:32:44 rpmi: libtasn1-4.19.0-alt3 sisyphus+327816.100.1.1 1692802618 installed <13>Oct 14 07:32:44 rpmi: rpm-macros-alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Oct 14 07:32:44 rpmi: alternatives-0.5.2-alt2 sisyphus+315270.200.2.1 1676457367 installed <13>Oct 14 07:32:44 rpmi: ca-certificates-2023.07.31-alt1 sisyphus+326137.200.1.1 1690809798 installed <13>Oct 14 07:32:44 rpmi: ca-trust-0.1.4-alt1 sisyphus+308690.100.1.1 1666182992 installed <13>Oct 14 07:32:44 rpmi: p11-kit-trust-1:0.24.1-alt2 sisyphus+324666.100.1.1 1689083450 installed <13>Oct 14 07:32:44 rpmi: libcrypto3-3.1.3-alt1 sisyphus+329935.40.3.2 1695159275 installed <13>Oct 14 07:32:44 rpmi: libssl3-3.1.3-alt1 sisyphus+329935.40.3.2 1695159275 installed <13>Oct 14 07:32:44 rpmi: python3-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Oct 14 07:32:45 rpmi: python3-base-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Oct 14 07:32:45 rpmi: python3-module-py3dephell-0.1.0-alt2 sisyphus+328191.600.5.1 1693609196 installed <13>Oct 14 07:32:45 rpmi: tests-for-installed-python3-pkgs-0.1.24-alt2 sisyphus+331059.100.4.1 1696870033 installed <13>Oct 14 07:32:45 rpmi: rpm-build-python3-0.1.24-alt2 sisyphus+331059.100.4.1 1696870033 installed <13>Oct 14 07:32:45 rpmi: rpm-build-tcl-0.6.2-alt1 sisyphus+299320.100.1.1 1651401392 installed <13>Oct 14 07:32:52 rpmi: xorg-proto-devel-2023.2-alt1.1 sisyphus+330960.100.2.1 1696609218 installed <13>Oct 14 07:32:52 rpmi: libjpeg-2:2.1.2-alt1.2 sisyphus+300827.100.2.1 1653916654 installed <13>Oct 14 07:32:52 rpmi: libpng16-1.6.40-alt1 sisyphus+323732.100.1.1 1687771859 installed <13>Oct 14 07:32:52 rpmi: libwayland-client-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Oct 14 07:32:52 rpmi: libatk-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Oct 14 07:32:52 rpmi: libglvnd-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Oct 14 07:32:52 rpmi: libboost_system1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:52 rpmi: xml-utils-1:2.10.4-alt1 sisyphus+311250.4140.175.1 1685629210 installed <13>Oct 14 07:32:52 rpmi: liblcms2-2.15-alt1 sisyphus+316039.100.1.1 1677666336 installed <13>Oct 14 07:32:52 rpmi: perl-HTTP-Date-6.06-alt1 sisyphus+324527.100.1.1 1688834564 installed <13>Oct 14 07:32:52 rpmi: perl-XML-NamespaceSupport-1.12-alt1 1491296348 installed <13>Oct 14 07:32:52 rpmi: python3-module-pkg_resources-1:68.2.2-alt1 sisyphus+329927.100.2.1 1695208272 installed <13>Oct 14 07:32:52 rpmi: zlib-devel-1.2.13-alt1 sisyphus+309409.200.2.1 1667402045 installed <13>Oct 14 07:32:52 rpmi: libtcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Oct 14 07:32:52 rpmi: tcl-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Oct 14 07:32:52 rpmi: libwebp7-1.3.2-alt1 sisyphus+329541.100.1.1 1694676226 installed <13>Oct 14 07:32:52 rpmi: libICE-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Oct 14 07:32:52 rpmi: libfribidi-1.0.13-alt1 sisyphus+320646.100.1.1 1684307083 installed <13>Oct 14 07:32:52 rpmi: libSM-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Oct 14 07:32:52 rpmi: rpm-build-gir-0.7.3-alt3.1 sisyphus+319393.100.1.1 1682538783 installed <13>Oct 14 07:32:52 rpmi: glib2-devel-2.78.0-alt1 sisyphus+329802.100.1.1 1694991244 installed <13>Oct 14 07:32:52 rpmi: libatk-devel-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Oct 14 07:32:52 rpmi: libepoxy-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Oct 14 07:32:52 rpmi: libusb-1.0.26-alt2 sisyphus+305525.100.1.1 1660924428 installed <13>Oct 14 07:32:52 rpmi: libopenblas-0.3.23-alt1.2 sisyphus+325749.100.1.1 1690531820 installed <13>Oct 14 07:32:52 rpmi: libwayland-server-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Oct 14 07:32:52 rpmi: perl-LWP-MediaTypes-6.04-alt1 sisyphus+225468.100.1.1 1553186684 installed <13>Oct 14 07:32:52 rpmi: perl-Compress-Raw-Zlib-2.206-alt1 sisyphus+325780.100.1.1 1690558898 installed <13>Oct 14 07:32:52 rpmi: perl-libnet-1:3.15-alt1 sisyphus+317310.100.1.1 1679580208 installed <13>Oct 14 07:32:52 rpmi: perl-XML-SAX-Base-1.09-alt1 1494364363 installed <13>Oct 14 07:32:52 rpmi: gtk-builder-convert-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Oct 14 07:32:53 rpmi: python3-module-Pygments-2.16.1-alt1 sisyphus+326610.100.1.1 1691406169 installed <13>Oct 14 07:32:53 rpmi: libsqlite3-3.42.0-alt1 sisyphus+321513.100.1.1 1684603061 installed <13>Oct 14 07:32:53 rpmi: libnspr-1:4.35-alt1 sisyphus+308164.100.1.1 1665397042 installed <13>Oct 14 07:32:54 rpmi: libicu73-1:7.3.2-alt1 sisyphus+323036.100.1.1 1686763401 installed <13>Oct 14 07:32:54 rpmi: libkmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Oct 14 07:32:54 rpmi: libquadmath0-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Oct 14 07:32:54 rpmi: libgomp1-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Oct 14 07:32:54 rpmi: libltdl7-2.4.7-alt3 sisyphus+328983.1500.12.1 1695073945 installed <13>Oct 14 07:32:54 rpmi: libopenjpeg2.0-2.5.0-alt1 sisyphus+299926.300.3.1 1652478844 installed <13>Oct 14 07:32:54 rpmi: libverto-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Oct 14 07:32:54 rpmi: libcom_err-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Oct 14 07:32:54 rpmi: libgraphite2-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Oct 14 07:32:54 rpmi: libXau-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Oct 14 07:32:54 rpmi: libXau-devel-1.0.11-alt1 sisyphus+311428.100.1.1 1670577440 installed <13>Oct 14 07:32:54 rpmi: libgraphite2-devel-1.3.14-alt2.1 sisyphus+279571.100.1.2 1626605157 installed <13>Oct 14 07:32:54 rpmi: libcom_err-devel-1.46.4.0.5.4cda-alt1 sisyphus+283826.100.1.1 1629975361 installed <13>Oct 14 07:32:54 rpmi: libverto-devel-0.3.2-alt1_1 sisyphus+321176.2200.10.2 1684806164 installed <13>Oct 14 07:32:54 rpmi: libraw-0.21.1-alt1 sisyphus+314571.100.5.1 1693994530 installed <13>Oct 14 07:32:54 rpmi: libquadmath13-devel-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Oct 14 07:32:54 rpmi: libquadmath-devel-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Oct 14 07:32:54 rpmi: libgfortran5-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Oct 14 07:32:54 rpmi: kmod-31-alt1 sisyphus+330699.100.1.1 1696072426 installed <13>Oct 14 07:32:54 rpmi: icu-utils-1:7.3.2-alt1 sisyphus+323036.100.1.1 1686763401 installed <13>Oct 14 07:32:54 rpmi: libicu-devel-1:7.3.2-alt1 sisyphus+323036.100.1.1 1686763401 installed <13>Oct 14 07:32:54 rpmi: libnss-3.94.0-alt1 sisyphus+330862.100.1.2 1696335687 installed <13>Oct 14 07:32:54 rpmi: python3-module-nss-1.0.1-alt6 sisyphus+311250.15200.175.1 1685633048 installed <13>Oct 14 07:32:54 rpmi: libICE-devel-1.1.1-alt1 sisyphus+311428.500.1.1 1670577559 installed <13>Oct 14 07:32:54 rpmi: libSM-devel-1.2.4-alt1 sisyphus+312057.200.1.1 1671526918 installed <13>Oct 14 07:32:54 rpmi: tcl-devel-8.6.13-alt1 sisyphus+310696.100.1.1 1669548256 installed <13>Oct 14 07:32:54 rpmi: libpng-devel-1.6.40-alt1 sisyphus+323732.100.1.1 1687771859 installed <13>Oct 14 07:32:54 rpmi: perl-File-Listing-6.16-alt1 sisyphus+325783.100.1.1 1690559356 installed <13>Oct 14 07:32:54 rpmi: libboost_atomic1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:54 rpmi: libboost_contract1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:54 rpmi: libboost_chrono1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:54 rpmi: libboost_timer1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:54 rpmi: libboost_thread1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:54 rpmi: libboost_type_erasure1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:54 rpmi: libOpenGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Oct 14 07:32:54 rpmi: libGLES-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Oct 14 07:32:54 rpmi: libwayland-cursor-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Oct 14 07:32:54 rpmi: libwayland-egl-4:18.1.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Oct 14 07:32:54 rpmi: groff-base-1.22.3-alt2 sisyphus+275306.100.2.1 1624538359 installed <13>Oct 14 07:32:54 rpmi: libpipeline-1.5.7-alt1_1 sisyphus+312433.100.1.1 1671879776 installed <13>Oct 14 07:32:54 rpmi: libmodbus-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Oct 14 07:32:54 rpmi: openldap-common-2.6.6-alt1 sisyphus+330946.100.2.1 1696432854 installed <13>Oct 14 07:32:54 rpmi: wayland-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Oct 14 07:32:54 rpmi: libwayland-client-devel-1.22.0-alt1.1 sisyphus+318010.100.1.1 1680606300 installed <13>Oct 14 07:32:54 rpmi: libxkbcommon-1.6.0-alt1 sisyphus+331300.100.1.1 1696855236 installed <13>Oct 14 07:32:54 rpmi: libgudev-1:238-alt1 sisyphus+324364.100.1.1 1688646145 installed <13>Oct 14 07:32:54 rpmi: libboost_python3-1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:54 rpmi: libxblas-1.0.248-alt2 sisyphus+285045.40.2.1 1631388462 installed <13>Oct 14 07:32:55 rpmi: liblapack-1:3.8.0-alt7 sisyphus+293726.100.1.1 1642544503 installed <13>Oct 14 07:32:55 rpmi: python3-module-numpy-1:1.25.2-alt1 sisyphus+326215.100.2.1 1691052232 installed <13>Oct 14 07:32:55 rpmi: libboost_numpy3-1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:32:55 rpmi: libxshmfence-1.3.2-alt1 sisyphus+311428.400.1.1 1670577529 installed <13>Oct 14 07:32:55 rpmi: libpciaccess-1:0.17-alt1 sisyphus+308663.300.1.1 1666168262 installed <13>Oct 14 07:32:55 rpmi: libdrm-1:2.4.116-alt2 sisyphus+328892.100.1.1 1694073854 installed <13>Oct 14 07:32:55 rpmi: less-633-alt1 sisyphus+328181.300.2.1 1693321749 installed <13>Oct 14 07:32:55 rpmi: perl-Try-Tiny-0.31-alt1 sisyphus+290597.100.1.1 1637915507 installed <13>Oct 14 07:32:55 rpmi: perl-IO-Socket-IP-0.42-alt1 sisyphus+325815.100.1.2 1690571193 installed <13>Oct 14 07:32:55 rpmi: perl-Module-Load-0.36-alt1 sisyphus+258992.100.1.1 1601543407 installed <13>Oct 14 07:32:55 rpmi: perl-Compress-Raw-Bzip2-2.206-alt1 sisyphus+325779.100.1.1 1690558767 installed <13>Oct 14 07:32:55 rpmi: perl-IO-Compress-Brotli-2:0.004001-alt3 sisyphus+302124.100.1.1 1655283098 installed <13>Oct 14 07:32:55 rpmi: perl-Clone-0.46-alt1 sisyphus+308850.100.1.3 1666451819 installed <13>Oct 14 07:32:55 rpmi: perl-HTML-Tagset-3.20-alt2 1317725093 installed <13>Oct 14 07:32:55 rpmi: perl-Term-ANSIColor-5.01-alt1 sisyphus+244783.100.1.2 1579747505 installed <13>Oct 14 07:32:55 rpmi: perl-Data-Dump-1.25-alt1 sisyphus+276551.100.1.1 1625126880 installed <13>Oct 14 07:32:55 rpmi: perl-Filter-1.64-alt1 sisyphus+305464.100.1.1 1660815328 installed <13>Oct 14 07:32:55 rpmi: perl-Encode-3.19-alt1 sisyphus+304776.100.1.1 1659623414 installed <13>Oct 14 07:32:55 rpmi: perl-URI-5.21-alt1 sisyphus+327918.100.1.1 1692972838 installed <13>Oct 14 07:32:55 rpmi: perl-IO-Compress-2.206-alt1 sisyphus+325819.100.1.1 1690563199 installed <13>Oct 14 07:32:55 rpmi: perl-Net-HTTP-6.23-alt1 sisyphus+323470.100.1.1 1687422469 installed <13>Oct 14 07:32:55 rpmi: perl-HTML-Parser-3.81-alt1 sisyphus+314462.100.1.1 1675193797 installed <13>Oct 14 07:32:55 rpmi: perl-WWW-RobotRules-6.02-alt1 1329756211 installed <13>Oct 14 07:32:55 rpmi: perl-Encode-Locale-1.05-alt1 1444608613 installed <13>Oct 14 07:32:55 rpmi: perl-IO-HTML-1.004-alt1 sisyphus+258983.100.1.1 1601542619 installed <13>Oct 14 07:32:55 rpmi: perl-HTTP-Message-6.45-alt1 sisyphus+330728.100.1.1 1696162276 installed <13>Oct 14 07:32:55 rpmi: perl-HTTP-Negotiate-6.01-alt1 1329760563 installed <13>Oct 14 07:32:55 rpmi: perl-libwww-6.72-alt1 sisyphus+325791.100.1.2 1690563984 installed <13>Oct 14 07:32:55 rpmi: perl-XML-LibXML-2.0209-alt1 sisyphus+325808.100.1.2 1690570830 installed <13>Oct 14 07:32:55 rpmi: perl-XML-SAX-1.02-alt1 sisyphus+232322.100.1.1 1560758406 installed <13>Oct 14 07:32:55 rpmi: perl-XML-Simple-2.25-alt2 sisyphus+257498.100.1.1 1599324034 installed <13>Oct 14 07:32:55 rpmi: icon-naming-utils-0.8.90-alt1 sisyphus+276851.100.1.1 1625243947 installed <13>Oct 14 07:32:56 rpmi: icon-theme-adwaita-45.0-alt1 sisyphus+325066.500.6.2 1695203960 installed <13>Oct 14 07:32:56 rpmi: perl-XML-Parser-2.46-alt1 sisyphus+279723.1300.1.1 1626649160 installed <13>Oct 14 07:32:56 rpmi: usbids-20230825-alt1 sisyphus+327952.100.1.1 1693025831 installed <13>Oct 14 07:32:56 rpmi: pciids-20230922-alt1 sisyphus+330116.100.1.1 1695424341 installed <13>Oct 14 07:32:56 rpmi: hwdata-0.374-alt1 sisyphus+329322.100.1.1 1694450297 installed <13>Oct 14 07:32:56 rpmi: gtk+3-themes-incompatible-3.20-alt3 1461944560 installed <13>Oct 14 07:32:56 rpmi: python3-module-zipp-3.17.0-alt1 sisyphus+330459.100.2.1 1695891920 installed <13>Oct 14 07:32:56 rpmi: python3-module-importlib-metadata-6.8.0-alt1 sisyphus+325197.100.2.1 1689870041 installed <13>Oct 14 07:32:56 rpmi: python3-module-markdown-3.5-alt1 sisyphus+331229.100.1.1 1696671900 installed <13>Oct 14 07:32:56 rpmi: python3-module-polib-1.1.1-alt1 sisyphus+282657.100.1.1 1628954165 installed <13>Oct 14 07:32:56 rpmi: python3-module-click-8.1.7-alt1 sisyphus+327424.100.2.1 1695395098 installed <13>Oct 14 07:32:56 rpmi: python3-module-zope.interface-6.0-alt1 sisyphus+326348.600.4.1 1691597456 installed <13>Oct 14 07:32:56 rpmi: python3-module-chameleon.core-4.2.0-alt1 sisyphus+330407.100.1.1 1695735099 installed <13>Oct 14 07:32:56 rpmi: python3-module-lingua-4.15.0-alt2 sisyphus+304052.100.1.1 1658352892 installed <13>Oct 14 07:32:57 rpmi: python3-module-babel-1:2.12.1-alt1 sisyphus+317409.100.1.1 1679678193 installed <13>Oct 14 07:32:57 rpmi: python3-module-markupsafe-1:2.1.3-alt1 sisyphus+323659.100.1.1 1687595160 installed <13>Oct 14 07:32:57 rpmi: python3-module-pycparser-2.21-alt1.1 sisyphus+309935.7300.4.1 1668527005 installed <13>Oct 14 07:32:57 rpmi: python3-module-cffi-1.16.0-alt1 sisyphus+330935.100.2.1 1696495706 installed <13>Oct 14 07:32:57 rpmi: python3-module-cryptography-41.0.3-alt1 sisyphus+326306.100.1.1 1690985265 installed <13>Oct 14 07:32:57 rpmi: python3-module-beaker-1.12.1-alt1 sisyphus+319143.100.1.1 1682256768 installed <13>Oct 14 07:32:57 rpmi: python3-module-mako-1.2.4-alt2 sisyphus+319351.100.1.1 1682510722 installed <13>Oct 14 07:32:57 rpmi: libffi-devel-1:3.4.2-alt2 sisyphus+287629.100.2.1 1634659534 installed <13>Oct 14 07:32:57 rpmi: libpython3-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Oct 14 07:32:57 rpmi: libncurses6-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Oct 14 07:32:57 rpmi: libtinfo-devel-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Oct 14 07:32:57 rpmi: libncurses-devel-6.3.20220618-alt4 sisyphus+328055.40.2.1 1693213017 installed <13>Oct 14 07:32:58 rpmi: python3-dev-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Oct 14 07:32:58 rpmi: python3-module-setuptools-1:68.2.2-alt1 sisyphus+329927.100.2.1 1695208272 installed <13>Oct 14 07:32:58 rpmi: gcc-c++-common-1.4.27-alt1 sisyphus+278099.1300.1.1 1626028636 installed <13>Oct 14 07:32:59 rpmi: libstdc++13-devel-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Oct 14 07:33:00 rpmi: gcc13-c++-13.2.1-alt2 sisyphus+327572.100.1.1 1692472364 installed <13>Oct 14 07:33:00 rpmi: libdevmapper-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>Oct 14 07:33:00 rpmi: mount-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <13>Oct 14 07:33:00 rpmi: losetup-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <13>Oct 14 07:33:00 rpmi: lsblk-2.39.2-alt1 sisyphus+329530.100.1.1 1694630203 installed <86>Oct 14 07:33:00 groupadd[329661]: group added to /etc/group: name=tape, GID=999 <86>Oct 14 07:33:00 groupadd[329661]: group added to /etc/gshadow: name=tape <86>Oct 14 07:33:00 groupadd[329661]: new group: name=tape, GID=999 <86>Oct 14 07:33:00 groupadd[329669]: group added to /etc/group: name=dialout, GID=998 <86>Oct 14 07:33:00 groupadd[329669]: group added to /etc/gshadow: name=dialout <86>Oct 14 07:33:00 groupadd[329669]: new group: name=dialout, GID=998 <86>Oct 14 07:33:00 groupadd[329676]: group added to /etc/group: name=input, GID=997 <86>Oct 14 07:33:00 groupadd[329676]: group added to /etc/gshadow: name=input <86>Oct 14 07:33:00 groupadd[329676]: new group: name=input, GID=997 <86>Oct 14 07:33:00 groupadd[329687]: group added to /etc/group: name=video, GID=996 <86>Oct 14 07:33:00 groupadd[329687]: group added to /etc/gshadow: name=video <86>Oct 14 07:33:00 groupadd[329687]: new group: name=video, GID=996 <86>Oct 14 07:33:00 groupadd[329694]: group added to /etc/group: name=render, GID=995 <86>Oct 14 07:33:00 groupadd[329694]: group added to /etc/gshadow: name=render <86>Oct 14 07:33:00 groupadd[329694]: new group: name=render, GID=995 <86>Oct 14 07:33:00 groupadd[329705]: group added to /etc/group: name=sgx, GID=994 <86>Oct 14 07:33:00 groupadd[329705]: group added to /etc/gshadow: name=sgx <86>Oct 14 07:33:00 groupadd[329705]: new group: name=sgx, GID=994 <13>Oct 14 07:33:00 rpmi: udev-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Oct 14 07:33:01 rpmi: dmsetup-1.02.196-alt1 sisyphus+328928.400.3.1 1694103939 installed <13>Oct 14 07:33:01 rpmi: dconf-profile-0.1-alt1 sisyphus+325633.340.3.1 1690415358 installed <13>Oct 14 07:33:01 rpmi: boost-python-headers-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_context1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_fiber1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_stacktrace1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_nowide1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_url1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_test1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_serialization1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_random1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_iostreams1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_json1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_regex1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_graph1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_date_time1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:01 rpmi: libboost_container1.83.0-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:03 rpmi: boost-devel-headers-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696508918 installed <13>Oct 14 07:33:03 rpmi: boost-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:03 rpmi: libgc-8.2.4-alt2 sisyphus+322425.100.2.1 1686551121 installed <13>Oct 14 07:33:03 rpmi: libmaa-1.4.7-alt5 sisyphus+310700.100.1.1 1669563759 installed <13>Oct 14 07:33:03 rpmi: dict-1:1.13.1-alt1 sisyphus+290985.100.1.1 1638223911 installed <13>Oct 14 07:33:03 rpmi: w3m-0.5.3-alt4.git20200502 sisyphus+328124.5000.1.1 1693253320 installed <13>Oct 14 07:33:03 rpmi: sgml-common-0.6.3-alt15 sisyphus+276099.100.1.1 1624817971 installed <13>Oct 14 07:33:03 rpmi: docbook-dtds-4.5-alt1 sisyphus+276837.100.1.1 1625242123 installed <13>Oct 14 07:33:03 rpmi: docbook-style-xsl-1.79.1-alt4 sisyphus+232871.100.1.1 1561238010 installed <13>Oct 14 07:33:03 rpmi: libxslt-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Oct 14 07:33:03 rpmi: xsltproc-1.1.37-alt1 sisyphus+307481.100.1.1 1664360525 installed <13>Oct 14 07:33:03 rpmi: asciidoc-9.1.0-alt2 sisyphus+282906.100.1.1 1629104440 installed <13>Oct 14 07:33:03 rpmi: libImageMagick7-common-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Oct 14 07:33:03 rpmi: libwmflite-0.2.8.4-alt13 sisyphus+275127.100.1.1 1624406848 installed <13>Oct 14 07:33:03 rpmi: liblqr-0.4.2-alt1 sisyphus+276247.100.1.2 1624927462 installed <13>Oct 14 07:33:03 rpmi: libjbig2.1-2.1-alt2 sisyphus+326386.40.6.1 1691148232 installed <13>Oct 14 07:33:03 rpmi: djvu-common-3.5.28-alt2 sisyphus+297715.100.1.1 1648887081 installed <13>Oct 14 07:33:03 rpmi: libdjvu-3.5.28-alt2 sisyphus+297715.100.1.1 1648887083 installed <13>Oct 14 07:33:03 rpmi: libgts-0.7.6-alt2.drc20130205.1 sisyphus+275722.100.1.1 1624749871 installed <13>Oct 14 07:33:03 rpmi: libpaper-1.1.28-alt4 sisyphus+325501.100.1.1 1690226536 installed <13>Oct 14 07:33:03 rpmi: liblmdb-0.9.31-alt1 sisyphus+330946.40.2.1 1696431544 installed <13>Oct 14 07:33:03 rpmi: libkeyutils-1.6.3-alt1 sisyphus+266061.100.1.1 1612919567 installed <86>Oct 14 07:33:03 groupadd[334559]: group added to /etc/group: name=_keytab, GID=993 <86>Oct 14 07:33:03 groupadd[334559]: group added to /etc/gshadow: name=_keytab <86>Oct 14 07:33:03 groupadd[334559]: new group: name=_keytab, GID=993 <13>Oct 14 07:33:03 rpmi: libkrb5-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <86>Oct 14 07:33:03 groupadd[334709]: group added to /etc/group: name=sasl, GID=992 <86>Oct 14 07:33:03 groupadd[334709]: group added to /etc/gshadow: name=sasl <86>Oct 14 07:33:03 groupadd[334709]: new group: name=sasl, GID=992 <13>Oct 14 07:33:04 rpmi: libsasl2-3-2.1.27-alt2.2 sisyphus+324359.6000.12.1 1689392231 installed <13>Oct 14 07:33:04 rpmi: libldap2-2.6.6-alt1 sisyphus+330946.100.2.1 1696432858 installed <13>Oct 14 07:33:04 rpmi: libkrb5-ldap-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <13>Oct 14 07:33:04 rpmi: libkrb5-devel-1.21.2-alt1 sisyphus+327265.100.1.1 1692185512 installed <13>Oct 14 07:33:04 rpmi: libtirpc-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Oct 14 07:33:04 rpmi: liblz4-1:1.9.4-alt1 sisyphus+309416.100.1.1 1667413000 installed <13>Oct 14 07:33:04 rpmi: libsystemd-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Oct 14 07:33:04 rpmi: libdbus-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <13>Oct 14 07:33:04 rpmi: libavahi-0.8-alt2 sisyphus+321176.300.10.2 1684803998 installed <13>Oct 14 07:33:04 rpmi: libcups-2.4.7-alt1 sisyphus+330606.100.1.1 1695998947 installed <13>Oct 14 07:33:04 rpmi: dbus-tools-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <86>Oct 14 07:33:04 groupadd[335019]: group added to /etc/group: name=messagebus, GID=991 <86>Oct 14 07:33:04 groupadd[335019]: group added to /etc/gshadow: name=messagebus <86>Oct 14 07:33:04 groupadd[335019]: new group: name=messagebus, GID=991 <86>Oct 14 07:33:04 useradd[335055]: new user: name=messagebus, UID=999, GID=991, home=/run/dbus, shell=/dev/null, from=none <13>Oct 14 07:33:04 rpmi: dbus-1.14.10-alt1 sisyphus+328676.100.1.1 1693833782 installed <13>Oct 14 07:33:04 rpmi: icon-theme-hicolor-0.17-alt2 sisyphus+248343.100.1.1 1584979043 installed <13>Oct 14 07:33:04 rpmi: libgtk+2-locales-2.24.33-alt1 sisyphus+278555.100.1.2 1626252653 installed <13>Oct 14 07:33:04 rpmi: libnuma-2.0.14-alt2 sisyphus+278485.100.1.1 1626104243 installed <13>Oct 14 07:33:04 rpmi: libx265-199-3.5-alt1.1 sisyphus+277560.100.1.1 1625696944 installed <13>Oct 14 07:33:04 rpmi: librav1e-0.6.6-alt1 sisyphus+320651.100.1.1 1684313157 installed <13>Oct 14 07:33:04 rpmi: libdeflate-1.19-alt1 sisyphus+329822.100.2.2 1695269332 installed <13>Oct 14 07:33:04 rpmi: libtiff5-4.4.0-alt4 sisyphus+322581.100.1.2 1686180093 installed <13>Oct 14 07:33:04 rpmi: libgdk-pixbuf-locales-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Oct 14 07:33:04 rpmi: libde265-1.0.12-alt1 sisyphus+329539.100.1.1 1694672072 installed <13>Oct 14 07:33:04 rpmi: libdav1d-1.2.1-alt1 sisyphus+323931.100.1.1 1688113640 installed <13>Oct 14 07:33:04 rpmi: libaom3-3.5.0-alt1 sisyphus+312085.100.1.1 1671551781 installed <13>Oct 14 07:33:04 rpmi: libdatrie-0.2.13-alt1_7 sisyphus+328221.100.1.1 1693336967 installed <13>Oct 14 07:33:04 rpmi: libthai-0.1.29-alt1_6 sisyphus+328230.100.1.2 1693348044 installed <13>Oct 14 07:33:04 rpmi: desktop-file-utils-0.26-alt4 sisyphus+324226.100.1.1 1688469484 installed <13>Oct 14 07:33:05 rpmi: shared-mime-info-2.3-alt1 sisyphus+331248.100.1.1 1696723964 installed <13>Oct 14 07:33:05 rpmi: gsettings-desktop-schemas-data-45.0-alt1 sisyphus+325066.400.6.2 1695203930 installed <13>Oct 14 07:33:05 rpmi: libgio-2.78.0-alt1 sisyphus+329802.100.1.1 1694991244 installed <13>Oct 14 07:33:05 rpmi: gsettings-desktop-schemas-45.0-alt1 sisyphus+325066.400.6.2 1695203930 installed <13>Oct 14 07:33:05 rpmi: libgdk-pixbuf-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Oct 14 07:33:05 rpmi: gobject-introspection-1.78.1-alt1.2 sisyphus+331544.100.1.1 1697060708 installed <13>Oct 14 07:33:05 rpmi: libgio-devel-2.78.0-alt1 sisyphus+329802.100.1.1 1694991244 installed <13>Oct 14 07:33:05 rpmi: libgdk-pixbuf-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Oct 14 07:33:05 rpmi: gobject-introspection-x11-1.78.1-alt1.2 sisyphus+331544.100.1.1 1697060708 installed <13>Oct 14 07:33:05 rpmi: gobject-introspection-devel-1.78.1-alt1.2 sisyphus+331544.100.1.1 1697060708 installed <13>Oct 14 07:33:05 rpmi: libatk-gir-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Oct 14 07:33:05 rpmi: libgdk-pixbuf-gir-2.42.10-alt1 sisyphus+308991.100.1.1 1666721201 installed <13>Oct 14 07:33:05 rpmi: libheif-1.15.2-alt1.1 sisyphus+328363.100.1.1 1693460606 installed <13>Oct 14 07:33:05 rpmi: gtk4-update-icon-cache-4.12.3-alt1 sisyphus+330542.100.1.1 1695913166 installed <13>Oct 14 07:33:05 rpmi: libgdk-pixbuf-gir-devel-2.42.10-alt1 sisyphus+308991.100.1.1 1666721198 installed <13>Oct 14 07:33:05 rpmi: libatk-gir-devel-2.50.0-alt1 sisyphus+329802.300.1.1 1694991397 installed <13>Oct 14 07:33:05 rpmi: libdconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Oct 14 07:33:05 rpmi: dconf-0.40.0-alt3 sisyphus+325650.100.1.1 1690417204 installed <13>Oct 14 07:33:05 rpmi: libgtk+3-schemas-3.24.38-alt1 sisyphus+321614.100.1.1 1684749819 installed <13>Oct 14 07:33:05 rpmi: libjson-glib-1.8.0-alt1 sisyphus+325066.600.6.2 1695204016 installed <13>Oct 14 07:33:05 rpmi: libgusb-0.4.7-alt1 sisyphus+331336.100.1.1 1696933625 installed <13>Oct 14 07:33:05 rpmi: libcolord-1.4.6-alt1 sisyphus+296000.100.1.1 1646050423 installed <13>Oct 14 07:33:05 rpmi: libpolkit-0.120-alt1.qa2 sisyphus+296007.100.1.1 1646053433 installed <86>Oct 14 07:33:05 groupadd[336297]: group added to /etc/group: name=colord, GID=990 <86>Oct 14 07:33:05 groupadd[336297]: group added to /etc/gshadow: name=colord <86>Oct 14 07:33:05 groupadd[336297]: new group: name=colord, GID=990 <86>Oct 14 07:33:05 useradd[336305]: new user: name=colord, UID=998, GID=990, home=/var/colord, shell=/dev/null, from=none <13>Oct 14 07:33:05 rpmi: colord-1.4.6-alt1 sisyphus+296000.100.1.1 1646050423 installed <13>Oct 14 07:33:05 rpmi: libpixman-3:0.42.2-alt1 sisyphus+309549.100.1.1 1667649379 installed <13>Oct 14 07:33:05 rpmi: libbrotlicommon-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Oct 14 07:33:05 rpmi: libbrotlidec-1.1.0-alt1 sisyphus+328501.100.1.1 1693598420 installed <13>Oct 14 07:33:05 rpmi: libharfbuzz-8.2.1-alt1 sisyphus+329986.40.2.1 1695293822 installed <13>Oct 14 07:33:05 rpmi: libfreetype-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Oct 14 07:33:05 rpmi: libfontconfig1-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Oct 14 07:33:05 rpmi: libharfbuzz-gobject-8.2.1-alt1 sisyphus+329986.40.2.1 1695293822 installed <13>Oct 14 07:33:05 rpmi: libharfbuzz-gir-8.2.1-alt1 sisyphus+329986.40.2.1 1695293822 installed <13>Oct 14 07:33:07 rpmi: libgs-10.01.1-alt1 sisyphus+318450.100.1.1 1681389085 installed <13>Oct 14 07:33:07 rpmi: fontconfig-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed Updating fonts cache: <29>Oct 14 07:33:08 fontconfig: Updating fonts cache: succeeded [ DONE ] <13>Oct 14 07:33:08 rpmi: libraqm-0.7.1-alt1 sisyphus+279320.100.1.2 1626503405 installed <13>Oct 14 07:33:08 rpmi: libharfbuzz-icu-8.2.1-alt1 sisyphus+329986.40.2.1 1695293822 installed <13>Oct 14 07:33:08 rpmi: libX11-locales-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400315 installed <13>Oct 14 07:33:08 rpmi: libXdmcp-1.1.4-alt1 sisyphus+311188.1000.1.1 1670233860 installed <13>Oct 14 07:33:08 rpmi: libxcb-1.16-alt1 sisyphus+327325.200.1.1 1692276267 installed <13>Oct 14 07:33:08 rpmi: libX11-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400319 installed <13>Oct 14 07:33:08 rpmi: libXext-1.3.5-alt1 sisyphus+309285.100.1.1 1667212413 installed <13>Oct 14 07:33:08 rpmi: libXrender-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Oct 14 07:33:08 rpmi: libcairo-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Oct 14 07:33:08 rpmi: libcairo-gobject-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Oct 14 07:33:08 rpmi: libXt-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Oct 14 07:33:08 rpmi: libXfixes-6.0.1-alt1 sisyphus+331490.300.1.1 1697023235 installed <13>Oct 14 07:33:08 rpmi: libXft-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Oct 14 07:33:08 rpmi: libpango-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Oct 14 07:33:08 rpmi: libXi-1.8-alt1 sisyphus+285490.200.1.1 1632124180 installed <13>Oct 14 07:33:08 rpmi: libXinerama-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Oct 14 07:33:08 rpmi: librsvg-1:2.57.0-alt1 sisyphus+329802.400.1.1 1694991606 installed <13>Oct 14 07:33:08 rpmi: libpango-gir-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Oct 14 07:33:08 rpmi: libtk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Oct 14 07:33:09 rpmi: tk-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Oct 14 07:33:09 rpmi: libXcursor-1.2.1-alt1 sisyphus+297765.200.1.1 1649053934 installed <13>Oct 14 07:33:09 rpmi: libXpm-3.5.17-alt1 sisyphus+330921.100.1.1 1696400258 installed <13>Oct 14 07:33:09 rpmi: libXmu-1.1.4-alt1 sisyphus+308663.1000.1.1 1666168416 installed <13>Oct 14 07:33:09 rpmi: libXrandr-1.5.4-alt1 sisyphus+330992.100.1.1 1696485401 installed <13>Oct 14 07:33:09 rpmi: libXcomposite-0.4.6-alt1 sisyphus+311188.200.1.1 1670233684 installed <13>Oct 14 07:33:09 rpmi: libXdamage-1.1.6-alt1 sisyphus+311188.300.1.1 1670233713 installed <13>Oct 14 07:33:09 rpmi: libgtk+2-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Oct 14 07:33:10 rpmi: libxcb-devel-1.16-alt1 sisyphus+327325.200.1.1 1692276267 installed <13>Oct 14 07:33:10 rpmi: libX11-devel-3:1.8.7-alt1 sisyphus+330921.200.1.1 1696400319 installed <13>Oct 14 07:33:10 rpmi: libXrender-devel-0.9.11-alt1 sisyphus+308841.100.1.1 1666436131 installed <13>Oct 14 07:33:10 rpmi: libXt-devel-1.3.0-alt1 sisyphus+331490.500.1.1 1697023316 installed <13>Oct 14 07:33:10 rpmi: libXmu-devel-1.1.4-alt1 sisyphus+308663.1000.1.1 1666168416 installed <13>Oct 14 07:33:10 rpmi: libXext-devel-1.3.5-alt1 sisyphus+309285.100.1.1 1667212413 installed <13>Oct 14 07:33:10 rpmi: libXaw-1.0.15-alt1 sisyphus+331490.200.1.1 1697023203 installed <13>Oct 14 07:33:10 rpmi: libgd3-2.3.3-alt1 sisyphus+286379.100.1.1 1633353310 installed <13>Oct 14 07:33:10 rpmi: tcl-tix-8.4.3-alt4 sisyphus+277292.300.2.1 1625442551 installed <13>Oct 14 07:33:10 rpmi: libat-spi2-core-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Oct 14 07:33:10 rpmi: at-spi2-atk-2.50.0-alt1 sisyphus+329802.300.1.1 1694991429 installed <13>Oct 14 07:33:11 rpmi: libgtk+3-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Oct 14 07:33:11 rpmi: libgtk+3-gir-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Oct 14 07:33:11 rpmi: liblasi-1.1.3-alt3 sisyphus+286812.100.2.1 1633968134 installed <13>Oct 14 07:33:11 rpmi: libgraphviz-8.0.5-alt2 sisyphus+311250.1320.175.1 1685627766 installed <13>Oct 14 07:33:11 rpmi: libharfbuzz-cairo-8.2.1-alt1 sisyphus+329986.40.2.1 1695293822 installed <13>Oct 14 07:33:11 rpmi: fontconfig-devel-2.14.2-alt8 sisyphus+328444.100.1.1 1693553407 installed <13>Oct 14 07:33:12 rpmi: libfreetype-devel-2.13.2-alt1 sisyphus+328677.100.1.1 1693834346 installed <13>Oct 14 07:33:12 rpmi: libcairo-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Oct 14 07:33:12 rpmi: libharfbuzz-devel-8.2.1-alt1 sisyphus+329986.40.2.1 1695293822 installed <13>Oct 14 07:33:12 rpmi: libharfbuzz-gir-devel-8.2.1-alt1 sisyphus+329986.40.2.1 1695293816 installed <13>Oct 14 07:33:12 rpmi: libpango-gir-devel-1.51.1-alt1 sisyphus+329828.40.3.1 1695333192 installed <13>Oct 14 07:33:12 rpmi: libcairo-gobject-devel-1:1.18.0-alt1 sisyphus+330227.100.1.1 1695539082 installed <13>Oct 14 07:33:12 rpmi: libXft-devel-2.3.8-alt1 sisyphus+331490.400.1.1 1697023273 installed <13>Oct 14 07:33:12 rpmi: libpango-devel-1.51.1-alt1 sisyphus+329828.40.3.1 1695333195 installed <13>Oct 14 07:33:12 rpmi: libgtk+3-devel-3.24.38-alt1 sisyphus+321614.100.1.1 1684749848 installed <13>Oct 14 07:33:12 rpmi: libXxf86vm-1.1.5-alt1 sisyphus+308663.1400.1.1 1666168534 installed <13>Oct 14 07:33:12 rpmi: libGLX-mesa-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Oct 14 07:33:12 rpmi: libGLX-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Oct 14 07:33:12 rpmi: libGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Oct 14 07:33:12 rpmi: libGLU-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Oct 14 07:33:12 rpmi: libgbm-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Oct 14 07:33:12 rpmi: libEGL-mesa-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Oct 14 07:33:12 rpmi: libEGL-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Oct 14 07:33:12 rpmi: libglvnd-devel-7:1.7.0-alt1 sisyphus+330949.100.1.1 1696424894 installed <13>Oct 14 07:33:12 rpmi: libiex30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Oct 14 07:33:12 rpmi: libilmthread30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Oct 14 07:33:12 rpmi: libimath29-3.1.6-alt4 sisyphus+327372.100.1.1 1692353383 installed <13>Oct 14 07:33:12 rpmi: libopenexr30-3.1.5-alt2.2 sisyphus+324124.100.1.1 1688379856 installed <13>Oct 14 07:33:12 rpmi: libImageMagick7.10-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Oct 14 07:33:12 rpmi: ImageMagick-tools-7.1.1.15-alt1 sisyphus+314571.140.5.1 1693994916 installed <13>Oct 14 07:33:12 rpmi: libGL-devel-4:23.2.1-alt1 sisyphus+331044.100.1.3 1696517486 installed <13>Oct 14 07:33:12 rpmi: libGLU-devel-4:9.0.1-alt1 sisyphus+278350.100.1.2 1626174378 installed <13>Oct 14 07:33:12 rpmi: libepoxy-devel-1.5.10-alt1 sisyphus+296853.200.2.1 1647631868 installed <13>Oct 14 07:33:12 rpmi: libgtk+3-gir-devel-3.24.38-alt1 sisyphus+321614.100.1.1 1684749819 installed <13>Oct 14 07:33:12 rpmi: libgtk+2-devel-2.24.33-alt1 sisyphus+278555.100.1.2 1626252537 installed <13>Oct 14 07:33:12 rpmi: python3-module-pygobject3-3.46.0-alt1 sisyphus+329802.700.1.1 1694992004 installed <13>Oct 14 07:33:12 rpmi: python3-modules-tkinter-3.11.6-alt1 sisyphus+331220.100.1.1 1696668078 installed <13>Oct 14 07:33:13 rpmi: libXaw-devel-1.0.15-alt1 sisyphus+331490.200.1.1 1697023203 installed <13>Oct 14 07:33:13 rpmi: libXinerama-devel-1.1.5-alt1 sisyphus+309287.100.1.1 1667213209 installed <13>Oct 14 07:33:13 rpmi: tk-devel-8.6.13-alt1 sisyphus+310696.200.1.1 1669548528 installed <13>Oct 14 07:33:13 rpmi: bwidget-1.9.1-alt1 1314273552 installed <13>Oct 14 07:33:13 rpmi: tcl-img-1.4.14-alt1 sisyphus+316986.300.2.1 1679243176 installed <13>Oct 14 07:33:13 rpmi: libtirpc-devel-1.3.4-alt1 sisyphus+331275.100.1.1 1696842482 installed <13>Oct 14 07:33:13 rpmi: asciidoc-a2x-9.1.0-alt2 sisyphus+282906.100.1.1 1629104440 installed <13>Oct 14 07:33:13 rpmi: boost-lockfree-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696508918 installed <13>Oct 14 07:33:13 rpmi: boost-python3-devel-1:1.83.0-alt3 sisyphus+331031.100.1.1 1696509028 installed <13>Oct 14 07:33:13 rpmi: gcc-c++-13-alt1 sisyphus+323337.300.1.1 1687268227 installed <13>Oct 14 07:33:13 rpmi: intltool-0.51.0-alt2 1513698802 installed <13>Oct 14 07:33:13 rpmi: man-db-2.11.2-alt1 sisyphus+324180.200.2.1 1688471224 installed <13>Oct 14 07:33:13 rpmi: libmodbus-devel-3.1.10-alt1 sisyphus+326185.100.1.1 1690851978 installed <13>Oct 14 07:33:13 rpmi: libusb-devel-1.0.26-alt2 sisyphus+305525.100.1.1 1660924428 installed <13>Oct 14 07:33:13 rpmi: tclx-1:8.4.4-alt1 sisyphus+251935.100.1.1 1589842635 installed <13>Oct 14 07:33:13 rpmi: xorg-cf-files-1.0.7-alt3 sisyphus+299066.100.1.1 1650986802 installed <13>Oct 14 07:33:13 rpmi: python3-module-yapps2-2.2.0-alt2 sisyphus+281199.100.1.1 1627462968 installed <13>Oct 14 07:33:13 rpmi: libudev-devel-1:254.5-alt1.2 sisyphus+331053.100.1.1 1696514800 installed <13>Oct 14 07:33:13 rpmi: libreadline-devel-8.2.1-alt1 sisyphus+328858.100.1.1 1694010631 installed <13>Oct 14 07:33:13 rpmi: dos2unix-7.5.1-alt1 sisyphus+328819.100.1.1 1693973916 installed Building target platforms: i586 Building for target i586 Wrote: /usr/src/in/nosrpm/linuxcnc-2.9.1-alt1.20231009.nosrc.rpm (w1.gzdio) Installing linuxcnc-2.9.1-alt1.20231009.src.rpm Building target platforms: i586 Building for target i586 Executing(%prep): /bin/sh -e /usr/src/tmp/rpm-tmp.62152 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf linuxcnc-2.9.1 + echo 'Source #0 (linuxcnc-2.9.1.tar):' Source #0 (linuxcnc-2.9.1.tar): + /bin/tar -xf /usr/src/RPM/SOURCES/linuxcnc-2.9.1.tar + cd linuxcnc-2.9.1 + /bin/chmod -c -Rf u+rwX,go-w . + echo 'Patch #0 (linuxcnc-2.9.1-alt1.20231009.patch):' Patch #0 (linuxcnc-2.9.1-alt1.20231009.patch): + /usr/bin/patch -p1 patching file .gear/rules patching file .gear/tags/list patching file .gear/upstream/remotes patching file lib/python/qtvcp/lib/virtual_keyboard.py patching file linuxcnc-documentation.desktop patching file linuxcnc.spec patching file scripts/linuxcnc_info.in patching file src/Makefile patching file src/Makefile.inc.in patching file src/configure.ac + sed -i 's|lib/tcltk/linuxcnc|lib/tcl/linuxcnc|' lib/python/rs274/options.py + sed -i 's|INCLUDES := .|INCLUDES := . /usr/include/tirpc|' src/Makefile + sed -i 's|LDFLAGS := |LDFLAGS := -ltirpc |' src/Makefile + sed 's/ -o root//g' -i src/Makefile + find . -name '*.py' -exec dos2unix '{}' ';' dos2unix: converting file ./tests/trajectory-planner/circular-arcs/test-reverse.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/run_all_tests.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/machine_setup.py to Unix format... dos2unix: converting file ./tests/trajectory-planner/circular-arcs/linuxcnc_control.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/reload-tool/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/toolchanger/m61/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-with-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/random-no-startup-tool/test-ui.py to Unix format... dos2unix: converting file ./tests/tool-info/non-random/test-ui.py to Unix format... dos2unix: converting file ./tests/tlo/test-ui.py to Unix format... dos2unix: converting file ./tests/statbuffer-g5x-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/startup-state/test-ui.py to Unix format... dos2unix: converting file ./tests/single-step/test-ui.py to Unix format... dos2unix: converting file ./tests/rs274ngc-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/subs.py to Unix format... dos2unix: converting file ./tests/remap/variable-injection/remap.py to Unix format... dos2unix: converting file ./tests/remap/spindle/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/spindle/remap.py to Unix format... dos2unix: converting file ./tests/remap/sequencing/permute.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-reentry/remap.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/toplevel.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/test-ui.py to Unix format... dos2unix: converting file ./tests/remap/remap-io/remap.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/subs.py to Unix format... dos2unix: converting file ./tests/remap/predefined-named-params/namedparams.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/subs.py to Unix format... dos2unix: converting file ./tests/remap/oword-pycall/oword.py to Unix format... dos2unix: converting file ./tests/remap/introspect/subs.py to Unix format... dos2unix: converting file ./tests/remap/introspect/oword.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/prolog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/epilog/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/canon_error/remap.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/subs.py to Unix format... dos2unix: converting file ./tests/remap/fail/body-py/remap.py to Unix format... dos2unix: converting file ./tests/mqtt/display.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-joint/test-ui.py to Unix format... dos2unix: converting file ./tests/motion/jogwheel-axis/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/startup-gcode-abort/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/mountaindew/test-ui.py to Unix format... dos2unix: converting file ./tests/motion-logger/basic/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/toplevel.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/test-ui.py to Unix format... dos2unix: converting file ./tests/mdi-while-queuebuster-waitflag/remap.py to Unix format... dos2unix: converting file ./tests/mdi-queue-length/test-ui.py to Unix format... dos2unix: converting file ./tests/lathe/test-ui.py to Unix format... dos2unix: converting file ./tests/io-startup/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/subs.py to Unix format... dos2unix: converting file ./tests/interp/value-returned/oword.py to Unix format... dos2unix: converting file ./tests/interp/subroutine-return/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/python/error/canon.py to Unix format... dos2unix: converting file ./tests/interp/python-self/subs.py to Unix format... dos2unix: converting file ./tests/interp/python-self/oword.py to Unix format... dos2unix: converting file ./tests/interp/pymove/subs.py to Unix format... dos2unix: converting file ./tests/interp/pymove/oword.py to Unix format... dos2unix: converting file ./tests/interp/oword-mdi-sub-update/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/mdi-oword-m66/test-ui.py to Unix format... dos2unix: converting file ./tests/interp/m98m99/12-M99-endless-main-program/test-ui.py to Unix format... dos2unix: converting file ./tests/hm2-idrom/check-dmesg.py to Unix format... dos2unix: converting file ./tests/hard-limits/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/mdi/test-ui.py to Unix format... dos2unix: converting file ./tests/halui/jogging/test-ui.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_writer.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_test.py to Unix format... dos2unix: converting file ./tests/halmodule.1/stream_reader.py to Unix format... dos2unix: converting file ./tests/halmodule.0/test.py to Unix format... dos2unix: converting file ./tests/hal-link-unlink/hallink.py to Unix format... dos2unix: converting file ./tests/ccomp/early-exit/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/stop-button-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/on_abort_command-crazy-move/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/g64/test-ui.py to Unix format... dos2unix: converting file ./tests/abort/feed-rate/test-ui.py to Unix format... dos2unix: converting file ./src/po/fixpaths.py to Unix format... dos2unix: converting file ./src/modsilent.py to Unix format... dos2unix: converting file ./src/hal/utils/elbpcom.py to Unix format... dos2unix: converting file ./src/hal/user_comps/z_level_compensation.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzbc-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzac-trt-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/xyzab-tdr-gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/scaragui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/rotarydelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/pumagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/puma560gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/millturngui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/melfagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/max5gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/maho600gui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/lineardelta.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hexagui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/hbmgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/vismach/5axisgui.py to Unix format... dos2unix: converting file ./src/hal/user_comps/sim-torch.py to Unix format... dos2unix: converting file ./src/hal/user_comps/scorbot-er-3.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pyvcp.py to Unix format... dos2unix: converting file ./src/hal/user_comps/pmx485.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mqtt-publisher.py to Unix format... dos2unix: converting file ./src/hal/user_comps/mitsub_vfd.py to Unix format... dos2unix: converting file ./src/hal/user_comps/hal_input.py to Unix format... dos2unix: converting file ./src/hal/user_comps/gladevcp.py to Unix format... dos2unix: converting file ./src/hal/drivers/rbf2h.py to Unix format... dos2unix: converting file ./src/hal/drivers/mesa-hostmot2/modbus/modcompile.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/touchy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/listing.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/hal_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/filechooser.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/touchy/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/stepconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/import_mach.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/stepconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtvcp/qtvcp.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac_gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-plasmac2qt.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-materials.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/qtplasmac-cfg2prefs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/qtplasmac/pmx485-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/pyui.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_validate.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/panelui_handler.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/master.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/commands.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pyui/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/tests.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/private_data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pncconf.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/pages.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/data.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_INI.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/pncconf/build_HAL.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/mdro/mdro.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/keybindings.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/gscreen.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gscreen/emc_interface.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/qt5_graphics.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gremlin/gremlin.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/widgets.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/preferences.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/player.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/notification.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/icon_theme_helper.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/gmoccapy.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/getiniinfo.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/dialogs.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/gmoccapy/__init__.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/tracking-test.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/teach-in.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/mdi.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/linuxcnctop.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/lintini.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/image-to-gcode.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/haltest.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/debuglevel.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/scripts/axis-remote.py to Unix format... dos2unix: converting file ./src/emc/usr_intf/axis/makeicon.py to Unix format... dos2unix: converting file ./src/emc/ini/update_ini.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/x1mill/x1mill_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/woodpecker/woodpecker_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qttouchy/qttouchy_handler.py to Unix format... dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py. dos2unix: Skipping symbolic link ./share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py. dos2unix: converting file ./share/qtvcp/screens/qtplasmac/qtplasmac_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtplasmac/languages/qtplasmac.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtlathe/qtlathe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtdragon/qtdragon_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qtaxis/qtaxis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/qt_cnc/qt_cnc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/screens/blender/blender_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_scara/vismach_scara_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/versaprobe/versaprobe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/tool_dialog/tool_dialog_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_probe/test_probe_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_panel/test_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_led/test_led_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_dial/test_dial_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/test_button/test_button_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/spindle_belts/spindle_belts_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/sim_panel/sim_panel_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/copy/copy_handler.py to Unix format... dos2unix: converting file ./share/qtvcp/panels/cam_align/cam_align_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/tester/tester_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/spartan/spartan_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/silverdragon/silverdragon_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/industrial/industrial_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/gaxis/gaxis_handler.py to Unix format... dos2unix: converting file ./share/gscreen/skins/9_axis/9_axis_handler.py to Unix format... dos2unix: converting file ./scripts/torture.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/stdglue.py to Unix format... dos2unix: Skipping symbolic link ./nc_files/remap_lib/python-stdglue/python/stdglue.py. dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/toplevel.py to Unix format... dos2unix: converting file ./nc_files/remap_lib/python-stdglue/python/remap.py to Unix format... dos2unix: converting file ./nc_files/involute.py to Unix format... dos2unix: converting file ./nc_files/holecircle.py to Unix format... dos2unix: converting file ./nc_files/flowsnake.py to Unix format... dos2unix: converting file ./nc_files/filtertest.py to Unix format... dos2unix: converting file ./nc_files/filtertest-gui.py to Unix format... dos2unix: converting file ./lib/python/vismach.py to Unix format... dos2unix: converting file ./lib/python/vcpparse.py to Unix format... dos2unix: converting file ./lib/python/tooldb.py to Unix format... dos2unix: converting file ./lib/python/rs274/options.py to Unix format... dos2unix: converting file ./lib/python/rs274/interpret.py to Unix format... dos2unix: converting file ./lib/python/rs274/glcanon.py to Unix format... dos2unix: converting file ./lib/python/rs274/author.py to Unix format... dos2unix: converting file ./lib/python/rs274/__init__.py to Unix format... dos2unix: converting file ./lib/python/rs274/OpenGLTk.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/widget_baseclass.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/web_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/virtualkeyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/versa_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/touchEntry.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tool_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/tab_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/system_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/stylesheeteditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_stacked.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_slider.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/status_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_led.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/state_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/simple_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/screen_options.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/runFromLine_dialog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_progress.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/round_gauge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/richtext_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/radio_axis_selector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/qtvcp_icons.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_subprog.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/probe_routines.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/overlay_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/origin_offsetview.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/offset_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/nurbs_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_touchy.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/mdi_history.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/led_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/joypad.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/jog_increments.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/image_switcher.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_selectionbox.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/hal_label.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_output.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/general_hal_input.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/geditor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_graphics.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/gcode_editor.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/file_manager.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/fake_status.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/entry_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dro_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialog_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/dialogMixin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/detach_tabs.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/container_widgets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/camview_widget.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/calculator.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/basic_probe.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/axis_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/adjustment_bar.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_tool_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button_round.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/action_button.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/widgets/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qtvcp_handler.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_tstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_pstat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makepins.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_makegui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_istat.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/qt_action.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/widgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/web_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/virtualkeyboard_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/versa_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/toolbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/tab_widget_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_slider_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/state_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/simplewidgets_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/screenoptions_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_progress_bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/round_gauge_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/qtvcp_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/overlay_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/nurbs_editor_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/led_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/joypad_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/jogincrements_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/hal_label_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/graphics_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/dialog_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/detach_tabs_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/container_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/camview_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/basic_probe_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/bar_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/actionbutton_plugin.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/plugins/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/logger.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/virtual_keyboard.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/xembed.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/writer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/wordcount.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/table.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/find.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/datetime.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/ext/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/writer/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/touchoff_subprogram.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/toolbar_actions.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/sys_notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/ripper/gcode_ripper.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/updater.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/tooltips.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/set_offsets.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conversational.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_triangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_star.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_slot.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_settings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_sector.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_polygon.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_line.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_gusset.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_bolt.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/conv_block.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qtplasmac/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/scara.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/qt_vismach.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/primitives.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/millturn.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/mill_xyz.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_vismach/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_pdf/PDFViewer.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/preferences.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/notify.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/message.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/mdi_text.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/machine_log.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/keybindings.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcodes.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/hole_circle.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/facing.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/gcode_utility/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/colored_formatter.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/aux_program_loader.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/auto_height/auto_height.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/audio_player.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/lib/__init__.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/core.py to Unix format... dos2unix: converting file ./lib/python/qtvcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/pyvcp_widgets.py to Unix format... dos2unix: converting file ./lib/python/pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/pyhal.py to Unix format... dos2unix: converting file ./lib/python/propertywindow.py to Unix format... dos2unix: converting file ./lib/python/popupkeyboard.py to Unix format... dos2unix: converting file ./lib/python/plasmac/triangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/star.py to Unix format... dos2unix: converting file ./lib/python/plasmac/slot.py to Unix format... dos2unix: converting file ./lib/python/plasmac/sector.py to Unix format... dos2unix: converting file ./lib/python/plasmac/run_from_line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/rectangle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/polygon.py to Unix format... dos2unix: converting file ./lib/python/plasmac/line.py to Unix format... dos2unix: converting file ./lib/python/plasmac/gusset.py to Unix format... dos2unix: converting file ./lib/python/plasmac/ellipse.py to Unix format... dos2unix: converting file ./lib/python/plasmac/circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/bolt_circle.py to Unix format... dos2unix: converting file ./lib/python/plasmac/block.py to Unix format... dos2unix: converting file ./lib/python/multifilebuilder.py to Unix format... dos2unix: converting file ./lib/python/linuxcnc_util.py to Unix format... dos2unix: converting file ./lib/python/linux_event.py to Unix format... dos2unix: converting file ./lib/python/hershey.py to Unix format... dos2unix: converting file ./lib/python/hal_glib.py to Unix format... dos2unix: converting file ./lib/python/hal.py to Unix format... dos2unix: converting file ./lib/python/gremlin_view.py to Unix format... dos2unix: converting file ./lib/python/glnav.py to Unix format... dos2unix: converting file ./lib/python/gladevcp_makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/xembed.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/tooledit_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/status_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/state_label.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/speedcontrol.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/persistence.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/overridewidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/offsetpage_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/makepins.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/macro_widget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/led.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/jogwheel.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/iconview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_widgets.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_sourceview.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pythonplugin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_pyngcgui.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_meter.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_mdihistory.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_lightbutton.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin_plus.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_gremlin.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_graph.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_filechooser.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_dial.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_bar.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/hal_actions.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gtk_action.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/gladebuilder.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/drowidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/core.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/combi_dro.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/calculatorwidget.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py to Unix format... dos2unix: converting file ./lib/python/gladevcp/__init__.py to Unix format... dos2unix: converting file ./lib/python/bwidget.py to Unix format... dos2unix: converting file ./lib/python/bitfile.py to Unix format... dos2unix: converting file ./docs/src/mkpre.py to Unix format... dos2unix: converting file ./docs/src/links_db_gen.py to Unix format... dos2unix: converting file ./docs/src/links.py to Unix format... dos2unix: converting file ./docs/src/gui/panelui_handler.py to Unix format... dos2unix: converting file ./docs/src/gen_complist.py to Unix format... dos2unix: converting file ./docs/src/checklinks.py to Unix format... dos2unix: converting file ./debian/tests/linuxcnc-test-ui.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/zlevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/woodpecker_/woodpecker_handler.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/numstr.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/compensate.py to Unix format... dos2unix: converting file ./configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/touchy/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/qtplasmac/custom_filter.py to Unix format... dos2unix: converting file ./configs/sim/hitcounter.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gscreen/industrial_lathe_wear/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/stdglue.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/signals.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/plasma_config/plasma.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/lathe_configs/lathehandler.py to Unix format... dos2unix: converting file ./configs/sim/gmoccapy/blockdelete.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/vismach/VMC_toolchange/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/stop-lookahead/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/rack-toolchange/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/util.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/getting-started/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/extend-builtins/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/remap/cycle/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/panelui-demo/panelui_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/plugins.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/pysubs/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/task.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/remap.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/oword.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/embedding.py to Unix format... dos2unix: converting file ./configs/sim/axis/orphans/iocontrol-removed/python/customtask.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/fullscreen.py to Unix format... dos2unix: converting file ./configs/sim/axis/ngcgui/axis_resize.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/toplevel.py to Unix format... dos2unix: converting file ./configs/sim/axis/lathe-fanucy/remap.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/gladevcp/hitcounter.py. dos2unix: converting file ./configs/sim/axis/gladevcp/test_handler.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/probe.py to Unix format... dos2unix: converting file ./configs/sim/axis/gladevcp/meter_scale.py to Unix format... dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_ran.py. dos2unix: Skipping symbolic link ./configs/sim/axis/db_demo/db_nonran.py. dos2unix: converting file ./configs/sim/axis/db_demo/db.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/functionhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler_persistent.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/templates/classhandler.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/simple-callback/simplecallback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/complex/complex.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/colored-label/coloredlabel.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/class-callback/class_callback.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/spinbutton.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/sourceview.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/radio.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox_manual_list.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/by-widget/combobox.py to Unix format... dos2unix: converting file ./configs/apps/gladevcp/animated-backdrop/cairodraw.py to Unix format... + sed -i 's/GROUP="plugdev"/GROUP="uucp"/g' debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules + exit 0 Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.56991 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + cd linuxcnc-2.9.1 + pushd src ~/RPM/BUILD/linuxcnc-2.9.1/src ~/RPM/BUILD/linuxcnc-2.9.1 + ./autogen.sh + CFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CFLAGS + CXXFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export CXXFLAGS + FFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FFLAGS + FCFLAGS='-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' + export FCFLAGS + '[' -n '' ']' ++ printf %s '-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic' ++ sed -r 's/(^|[[:space:]]+)-[^m][^[:space:]]*//g' + ASFLAGS=' -march=i586 -mtune=generic' + export ASFLAGS + export lt_cv_deplibs_check_method=pass_all + lt_cv_deplibs_check_method=pass_all + readlink -e -- ./configure + xargs -ri dirname -- '{}' + xargs -ri find '{}' -type f '(' -name config.sub -or -name config.guess ')' -printf '%h/\n' + sort -u + xargs -rn1 install -pm755 -- /usr/share/gnu-config/config.sub /usr/share/gnu-config/config.guess + configure_runstatedir_flags= + grep -qF runstatedir=DIR ./configure + configure_runstatedir_flags=--runstatedir=/var/run + ./configure --build=i586-alt-linux --host=i586-alt-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var/lib --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --disable-silent-rules --runstatedir=/var/run --without-included-gettext --enable-non-distributable=yes --with-realtime=uspace configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext checking for i586-alt-linux-c++... no checking for i586-alt-linux-clang++... no checking for c++... c++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking for a BSD-compatible install... /bin/install -c checking whether c++ supports C++17 features with -std=gnu++17... yes checking build toplevel... /usr/src/RPM/BUILD/linuxcnc-2.9.1 checking installation prefix... /usr checking for grep... /bin/grep checking for egrep... /usr/bin/egrep checking for pkg-config... /usr/bin/pkg-config checking for i586-alt-linux-gcc... i586-alt-linux-gcc checking whether the compiler supports GNU C... yes checking whether i586-alt-linux-gcc accepts -g... yes checking for i586-alt-linux-gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for rpc/rpc.h... no checking for get_myaddress in -ltirpc... yes checking for rpc/rpc.h... yes checking for rtai-config... none checking for xeno-config... none checking for realtime API(s) to use... uspace checking whether to enable userspace PCI access... yes checking for libudev... yes - version 254 checking for cc version... not specified checking for i586-alt-linux-gcc... (cached) i586-alt-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether i586-alt-linux-gcc accepts -g... (cached) yes checking for i586-alt-linux-gcc option to enable C11 features... (cached) none needed checking how to run the C preprocessor... i586-alt-linux-gcc -E checking for usability of linux/hidraw.h... yes checking for usability of rpc/rpc.h... yes checking for libmodbus3... yes - version 3.1.10 checking for libusb-1.0... yes checking for libgpiod... checking for main in -lgpiod... no configure: WARNING: Could not find libgpiod, not building hal_gpio checking for module installation directory... /usr/lib/linuxcnc/modules checking for glib... yes - 2.78.0 checking for GTK 3.22.4 or above... yes - 3.24.38 checking for GTK 2.4.0 or above... yes - 2.24.33 checking for libgnomeprintui-2.2... no -- printing from classicladder will not be possible checking whether make sets $(MAKE)... yes checking for i586-alt-linux-ranlib... no checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for install... /bin/install -c checking for sed... /bin/sed checking for ps... /bin/ps checking for kill... /bin/kill checking for whoami... /usr/bin/whoami checking for awk... /bin/awk checking for pidof... /bin/pidof checking for ipcs... /usr/bin/ipcs checking for fuser... /usr/bin/fuser checking for yapps... no checking for yapps2... /usr/bin/yapps2 checking for mandb... /usr/bin/mandb checking for intltool-extract... /usr/bin/intltool-extract checking for yapps... (cached) /usr/bin/yapps2 checking build system type... i586-alt-linux-gnu checking host system type... i586-alt-linux-gnu checking for boostlib >= (102000)... yes checking for python build information... checking for python3.11... python3.11 checking for main in -lpython3.11... yes results of the Python check: Binary: python3.11 Library: python3.11 Include Dir: /usr/include/python3.11 checking for python3.11... /usr/bin/python3.11 checking for python... (cached) /usr/bin/python3.11 checking for a version of Python >= '2.1.0'... yes checking for the sysconfig Python package... yes checking for Python include path... -I/usr/include/python3.11 checking for Python library path... -L/usr/lib -lpython3.11 checking for Python site-packages path... /usr/lib/python3/site-packages checking for Python platform specific site-packages path... checking python extra libraries... -ldl -lm checking python extra linking flags... -Xlinker -export-dynamic checking consistency of all components of python development environment... yes checking whether the Boost::Python library is available... yes checking whether boost_python is the correct library... no checking whether boost_python311-mt is the correct library... yes checking whether to build documentation... no checking for sys/io.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for semtimedop... yes checking for optreset... no checking for library containing dlopen... none required checking for library containing clock_nanosleep... none required checking for tcl... find: '/usr/lib/chkpwd': Permission denied /usr/lib/tclConfig.sh found checking for tk... /usr/lib/tkConfig.sh found checking whether to check for runtime dependencies... yes checking for BWidget using /usr/bin/tclsh8.6... found checking for BLT using /usr/bin/tclsh8.6... not found checking for tclX using /usr/bin/tclsh8.6... found checking for python pango module... found checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X11/extensions/Xinerama.h... yes checking for XineramaQueryExtension in -lXinerama... yes checking for readline/readline.h... yes checking for readline/history.h... yes Trying readline without -ltermcap checking for readline in -lreadline... yes Trying readline with -ltermcap checking for readline in -lreadline... no Readline does not require -ltermcap checking whether readline license is compatible with GPL-2... no configure: WARNING: The LinuxCNC binary you are building may not be distributable due to a license incompatibility with LinuxCNC (some portions GPL-2 only) and Readline version 6 and greater (GPL-3 or later). configure: WARNING: User requested to enable non-distributable builds. Continuing. checking for locale.h... yes checking for setlocale... yes checking for libintl.h... yes checking for gettext in -lintl... no checking for xgettext... /usr/bin/xgettext checking for msgfmt... /usr/bin/msgfmt checking python version... OK checking match between tk and Tkinter versions... 8.6 checking for site-package location... /usr/lib/python3/site-packages checking for working GLU quadrics... yes checking for Xmu headers... checking for X11/Xmu/Xmu.h... yes configure: creating ./config.status config.status: creating ../scripts/rtapi.conf config.status: creating ../scripts/linuxcnc config.status: creating ../scripts/linuxcnc_info config.status: creating ../scripts/halrun config.status: creating ../scripts/rip-environment config.status: creating ../scripts/haltcl config.status: creating ../scripts/halcmd_twopass config.status: creating ../scripts/realtime config.status: creating ../scripts/runtests config.status: creating ../scripts/linuxcnc_var config.status: creating ../scripts/linuxcnc-checklink config.status: creating Makefile.inc config.status: creating Makefile.modinc config.status: creating ../tcl/linuxcnc.tcl config.status: creating ../lib/python/nf.py config.status: creating ../scripts/linuxcncmkdesktop config.status: creating ../share/applications/linuxcnc-latency.desktop config.status: creating ../share/applications/linuxcnc-latency-histogram.desktop config.status: creating ../share/applications/linuxcnc-pncconf.desktop config.status: creating ../share/applications/linuxcnc-stepconf.desktop config.status: creating ../share/applications/linuxcnc.desktop config.status: creating ../share/desktop-directories/linuxcnc-cnc.directory config.status: creating ../share/desktop-directories/linuxcnc-ref.directory config.status: creating ../share/desktop-directories/linuxcnc-doc.directory config.status: creating ../share/menus/CNC.menu config.status: creating config.h configure: WARNING: unrecognized options: --disable-dependency-tracking, --disable-silent-rules, --without-included-gettext ###################################################################### # LinuxCNC - Enhanced Machine Controller # ###################################################################### # # # LinuxCNC is a software system for computer control of machine # # tools such as milling machines. LinuxCNC is released under the # # GPL. Check out http://www.linuxcnc.org/ for more details. # # # # # # It seems that ./configure completed successfully. # # This means that RT is properly installed # # If things don't work check config.log for errors & warnings # # # # warning: If you already have an installed linuxcnc, this will # # replace an existing installation. If you have installed # # a linuxcnc package, this will damage the package. # # hint: To test a self-built version of linuxcnc without damaging # # the package version, don't specify a --prefix # # # # Next compile by typing # # make # # then install it by typing # # sudo make install # # # # To run the software type # # linuxcnc # # # ###################################################################### + make -j8 make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/115 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating abs.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating abs_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating and2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating anglejog.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating axistest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bin2gray.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating biquad.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bitslice.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bitwise.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating bldc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating blend.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating carousel.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating charge_pump.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarke2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarke3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating clarkeinv.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating comp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating constant.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' converting conv for conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating corexy_by_hal.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating dbounce.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ddt.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating deadzone.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating demux.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating differential.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating div2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating edge.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating eoffset_per_angle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating estop_latch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating feedcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating filter_kalman.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating flipflop.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gantry.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gearchange.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating gray2bin.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating histobins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating homecomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating hypot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ilowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating integ.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating invert.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating joyhandle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating knob2float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating latencybins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit1.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating limit_axis.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lincurve.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating logic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lowpass.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating lut5.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating maj3.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating match8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating max31855.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_pktgyro_test.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating message.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating millturn.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating minmax.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating moveoff.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mult2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating multiclick.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating multiswitch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux16.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux4.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mux8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating near.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating not.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating offset.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ohmic.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating oneshot.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating or2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating orient.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating plasmac.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sample_hold.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating scale.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating scaled_s32_sums.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating select8.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_axis_hardware.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_home_switch.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_matrix_kb.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_parport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sim_spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating simple_tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sphereprobe.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating spindle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating spindle_monitor.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating steptest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating sum2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating thc.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating thcud.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating threadtest.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating time.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating timedelay.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating timedelta.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tof.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating toggle.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating toggle2nist.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating ton.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tristate_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating updown.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating tristate_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating userkins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating wcomp.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xhc_hb04_util.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xor2.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating xyzab_tdr_kins.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating serport.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_7i65.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating mesa_uart.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_bit_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_float_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_float_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_s32_u32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_bit.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_float.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating conv_u32_s32.mak make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:57: warning: undefined variable 'MAKECMDGOALS' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Reading 0/205 dependency files Done reading dependencies Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' Reading 0/237 realtime dependency files Done reading realtime dependencies make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' sed hal/drivers/mesa_uart.comp -e "1 s/mesa_uart/mesa_uart_test/" > ../tests/halcompile/serial-out-of-tree/mesa_uart_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' sed ../docs/src/hal/rand.comp -e "1 s/rand/rand_test/" > ../tests/halcompile/userspace/rand_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp ../scripts/rtapi.conf ../tests/uspace/spawnv-root/rtapi.conf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying test input hal/components/bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/posemath.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/rcs/rcs_exit.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/rcs/rcs_print.cc libnml/rcs/rcs_print.cc: In function 'int rcs_fputs(const char*)': libnml/rcs/rcs_print.cc:372:26: warning: the address of 'rcs_print_file_name' will never be NULL [-Waddress] 372 | if (NULL == rcs_print_file_name) { | ^ libnml/rcs/rcs_print.cc:48:6: note: 'rcs_print_file_name' declared here 48 | char rcs_print_file_name[80] = "rcs_out.txt"; | ^~~~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_timer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_sem.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/_shm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/sem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/shm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/phantom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/locmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/memsem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/physmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/os_intf/timer.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/sendn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/recvn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/shmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_aup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_pm.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_in.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_dup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_cfg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_up.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_xup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/tcp_opts.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/cmd_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cmsdiag.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/cms_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_oi.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/buffer/tcpmem.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nmldiag.cc libnml/nml/nmldiag.cc: In function 'int nml_print_diag_list()': libnml/nml/nmldiag.cc:134:26: warning: the address of 'CMS::BufferName' will never be NULL [-Waddress] 134 | if (NULL != nml->cms->BufferName) { | ^ In file included from libnml/cms/cmsdiag.hh:18, from libnml/nml/nmldiag.hh:18, from libnml/nml/nmldiag.cc:16: libnml/cms/cms.hh:354:10: note: 'CMS::BufferName' declared here 354 | char BufferName[LINELEN]; | ^~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/cms/tcp_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nmlmsg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/stat_msg.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_srv.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/linklist/linklist.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/inifile/inivar.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_ulapi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_string.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/inifile/inifile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/rtapi_pci.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_parport.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/halstreamer.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/halstreamer.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/halstreamer.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/halstreamer.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/halstreamer.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml" Note: Writing halstreamer.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/halstreamer.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in config.status: creating ../docs/man/man1/linuxcnc.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/emccalib.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/emccalib.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/emccalib.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/emccalib.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/emccalib.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml" Note: Writing emccalib.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/emccalib.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling libnml/nml/nml_mod.cc libnml/nml/nml_mod.cc: In member function 'void NML_MODULE::setCmdChannel(RCS_CMD_CHANNEL*)': libnml/nml/nml_mod.cc:274:16: warning: the address of 'CMS::ProcessName' will never be NULL [-Waddress] 274 | if (NULL != commandIn->cms->ProcessName) | ^ In file included from libnml/nml/nml_oi.hh:20, from libnml/nml/nml_mod.cc:66: libnml/cms/cms.hh:356:10: note: 'CMS::ProcessName' declared here 356 | char ProcessName[LINELEN]; | ^~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/sendkeys.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/sendkeys.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/sendkeys.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/sendkeys.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/sendkeys.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml" Note: Writing sendkeys.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/sendkeys.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/hy_gt_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/hy_gt_vfd.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/hy_gt_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/hy_gt_vfd.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/hy_gt_vfd.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml" Note: Writing hy_gt_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/hy_gt_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/mqtt-publisher.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/mqtt-publisher.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/mqtt-publisher.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/mqtt-publisher.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/mqtt-publisher.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml" Note: Writing mqtt-publisher.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/mqtt-publisher.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/streamer_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/sampler_usr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/svd-ps_vfd.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/svd-ps_vfd.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/svd-ps_vfd.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/svd-ps_vfd.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/svd-ps_vfd.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml" Note: Writing svd-ps_vfd.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/svd-ps_vfd.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/components/panelui.c hal/components/panelui.c: In function 'main': hal/components/panelui.c:211:5: warning: 'Py_SetProgramName' is deprecated [-Wdeprecated-declarations] 211 | Py_SetProgramName(wname); | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.11/Python.h:94, from hal/components/panelui.c:73: /usr/include/python3.11/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_init.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man3/hm2_pktuart.3` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man3/hm2_pktuart.3.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man3', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man3/hm2_pktuart.3.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man3/hm2_pktuart.3.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man3/hm2_pktuart.3.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml" Note: Writing hm2_pktuart.3 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man3/hm2_pktuart.3.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_modbus.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man1/xhc-whb04b-6.1` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man1/xhc-whb04b-6.1.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man1', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man1/xhc-whb04b-6.1.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/xhc-whb04b-6.1.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man1/xhc-whb04b-6.1.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml" Note: Writing xhc-whb04b-6.1 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man1/xhc-whb04b-6.1.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/mb2hal/mb2hal_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/gs2_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/hy_gt_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/enum.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/enum.9.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/enum.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/enum.9.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/enum.9.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml" Note: Writing enum.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/enum.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' a2x -v --doctype manpage \ --format manpage \ --destination-dir `dirname ../docs/man/man9/streamer.9` \ --xsltproc-opts="--nonet" \ -a mansource=LinuxCNC \ -a manmanual='LinuxCNC Documentation' \ ../docs/src/man/man9/streamer.9.adoc a2x: args: ['-v', '--doctype', 'manpage', '--format', 'manpage', '--destination-dir', '../docs/man/man9', '--xsltproc-opts=--nonet', '-a', 'mansource=LinuxCNC', '-a', 'manmanual=LinuxCNC Documentation', '../docs/src/man/man9/streamer.9.adoc'] a2x: resource files: [] a2x: resource directories: ['/etc/asciidoc/images', '/etc/asciidoc/stylesheets'] a2x: executing: "/usr/bin/asciidoc" --backend docbook -a "a2x-format=manpage" --doctype manpage --attribute "mansource=LinuxCNC" --attribute "manmanual=LinuxCNC Documentation" --verbose --out-file "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/streamer.9.adoc" asciidoc: reading: /etc/asciidoc/asciidoc.conf asciidoc: reading: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/src/man/man9/streamer.9.adoc asciidoc: reading: /etc/asciidoc/docbook45.conf asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf asciidoc: reading: /etc/asciidoc/lang-en.conf asciidoc: writing: /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml a2x: executing: "xmllint" --nonet --noout --valid "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9 a2x: executing: "xsltproc" --nonet --stringparam callout.graphics 0 --stringparam navig.graphics 0 --stringparam admon.textlabel 1 --stringparam admon.graphics 0 "/etc/asciidoc/docbook-xsl/manpage.xsl" "/usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml" Note: Writing streamer.9 a2x: chdir /usr/src/RPM/BUILD/linuxcnc-2.9.1/src a2x: deleting /usr/src/RPM/BUILD/linuxcnc-2.9.1/docs/man/man9/streamer.9.xml make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/shuttle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/svd-ps_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/sendkeys.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/vfs11_vfd/vfs11_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling rtapi/uspace_rtapi_app.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/config.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/classicladder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/classicladder_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/config_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/drawing_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/drawing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/emc_mods.c hal/classicladder/emc_mods.c: In function 'ConvVarNameToHalSigName': hal/classicladder/emc_mods.c:137:20: warning: the comparison will always evaluate as 'true' for the address of 'name' will never be NULL [-Waddress] 137 | if(sig->name) { | ^~~ In file included from hal/classicladder/emc_mods.c:25: ./hal/hal_priv.h:332:10: note: 'name' declared here 332 | char name[HAL_NAME_LEN + 1]; /* signal name */ | ^~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files_project.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/files_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/edit_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/protocol_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/protocol_modbus_slave.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/serial_linux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/socket_modbus_master.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/editproperties_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/socket_server.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/vars_names.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_main.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halsh.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/manager_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/spy_vars_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/symbols_gtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_completion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-hb04.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halrmt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/miscgtk.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_trig.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/meter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying Modbus template mesa_modbus.c.tmpl make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script elbpcom Copying python script elbpcom make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script modcompile Copying python script modcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/halcmd_commands.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_vert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_horiz.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/vfdb_vfd/vfdb_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/huanyang-vfd/hy_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/huanyang-vfd/hy_comm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_disp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/utils/scope_files.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/pendant-types.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/xhc-whb04b6.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/usb.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/modal_state.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/hal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcargs.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/canon_position.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emcops.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/pendant.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/shcom.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/emc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/xhc-whb04b-6/main.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/nml_intf/interpl.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inihal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inispindle.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/emcIniFile.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/iniaxis.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/sockets.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/inijoint.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/ini/initraj.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_common.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_mmap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/schedrmt.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/emcmotglb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcrsh.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/tooldata/tooldata_db.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emcsched.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/emclcd.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emccanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/halui.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/backtrace.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emcsvr.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/usrmotintf.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_arc.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emctaskmain.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_array.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_base.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/emctask.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_check.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_queue.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_execute.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_cycles.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_inverse.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_find.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_convert.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_internal.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_write.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_read.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/nurbs_additional_functions.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_g7x.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_python.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_o_word.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_setup.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_namedparams.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_remap.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/task/taskmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/canonmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interp_inspection.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyemctypes.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyblock.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyparamclass.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/ugenserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/canterp/canterp.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/saicanon.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/iotask/ioControl.cc emc/iotask/ioControl.cc: In function 'int main(int, char**)': emc/iotask/ioControl.cc:694:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 694 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:695:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 695 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl.cc:696:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 696 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyarrays.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/iotask/ioControl_v2.cc emc/iotask/ioControl_v2.cc: In function 'int main(int, char**)': emc/iotask/ioControl_v2.cc:791:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 791 | fprintf(stderr," EMC_STAT size=%8ld\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:792:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 792 | fprintf(stderr," EMC_IO_STAT size=%8ld\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d emc/iotask/ioControl_v2.cc:793:56: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 793 | fprintf(stderr," EMC_TOOL_STAT size=%8ld\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | | unsigned int | long int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion-logger/motion-logger.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling module_helper/module_helper.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/rs274ngc_pre.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/cs/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/da/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/de/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/pythonplugin/python_plugin.cc emc/pythonplugin/python_plugin.cc: In constructor 'PythonPlugin::PythonPlugin(_inittab*)': emc/pythonplugin/python_plugin.cc:298:22: warning: 'void Py_SetProgramName(const wchar_t*)' is deprecated [-Wdeprecated-declarations] 298 | Py_SetProgramName(program); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ In file included from /usr/include/python3.11/Python.h:94, from /usr/include/boost/python/detail/wrap_python.hpp:178, from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/ssize_t.hpp:9, from /usr/include/boost/python/object.hpp:8, from emc/pythonplugin/python_plugin.hh:25, from emc/pythonplugin/python_plugin.cc:19: /usr/include/python3.11/pylifecycle.h:37:38: note: declared here 37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *); | ^~~~~~~~~~~~~~~~~ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/es/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/fr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/fi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/hu/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/interpmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/nb/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ja/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/it/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/pl/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/dummyemcstat.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sk/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sr/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ru/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/ro/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/sv/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/vi/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/cs/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/da/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/de/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/es/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/fr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/it/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/hu/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/nb/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/sk/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/pl/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/linuxcnc.h ../include/linuxcnc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/sr/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/emcIniFile.hh ../include/emcIniFile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/vi/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/iniaxis.hh ../include/iniaxis.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inijoint.hh ../include/inijoint.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inispindle.hh ../include/inispindle.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized gmoccapy message catalog ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/initraj.hh ../include/initraj.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/ini/inihal.hh ../include/inihal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/cubic.h ../include/cubic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/kinematics.h ../include/kinematics.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/switchkins.h ../include/switchkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/genhexkins.h ../include/genhexkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/genserkins.h ../include/genserkins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/pyinterp1.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/pentakins.h ../include/pentakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/kinematics/pumakins.h ../include/pumakins.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tc.h ../include/tc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tc_types.h ../include/tc_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tcq.h ../include/tcq.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tp.h ../include/tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/tp_types.h ../include/tp_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/spherical_arc.h ../include/spherical_arc.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/tp/blendmath.h ../include/blendmath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/emcmotcfg.h ../include/emcmotcfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/motion.h ../include/motion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/homing.h ../include/homing.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/simple_tp.h ../include/simple_tp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/state_tag.h ../include/state_tag.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/usrmotintf.h ../include/usrmotintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/motion/axis.h ../include/axis.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/canon.hh ../include/canon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/canon_position.hh ../include/canon_position.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emctool.h ../include/emctool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emc.hh ../include/emc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emc_nml.hh ../include/emc_nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emccfg.h ../include/emccfg.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcglb.h ../include/emcglb.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcpos.h ../include/emcpos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/emcpose.h ../include/emcpose.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/interp_return.hh ../include/interp_return.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/interpl.hh ../include/interpl.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/motion_types.h ../include/motion_types.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/nml_intf/debugflags.h ../include/debugflags.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_internal.hh ../include/interp_internal.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_fwd.hh ../include/interp_fwd.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/interp_base.hh ../include/interp_base.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/modal_state.hh ../include/modal_state.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/rs274ngc/rs274ngc.hh ../include/rs274ngc.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp emc/sai/saicanon.hh ../include/saicanon.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/hal.h ../include/hal.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/hal_parport.h ../include/hal_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp hal/drivers/mesa-hostmot2/hostmot2-serial.h ../include/hostmot2-serial.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/locmem.hh ../include/locmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/memsem.hh ../include/memsem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/phantom.hh ../include/phantom.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/physmem.hh ../include/physmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/recvn.h ../include/recvn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/rem_msg.hh ../include/rem_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/sendn.h ../include/sendn.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/shmem.hh ../include/shmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/buffer/tcpmem.hh ../include/tcpmem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms.hh ../include/cms.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_aup.hh ../include/cms_aup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_cfg.hh ../include/cms_cfg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_dup.hh ../include/cms_dup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_srv.hh ../include/cms_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_up.hh ../include/cms_up.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_user.hh ../include/cms_user.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cms_xup.hh ../include/cms_xup.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/cmsdiag.hh ../include/cmsdiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/tcp_opts.hh ../include/tcp_opts.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/cms/tcp_srv.hh ../include/tcp_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/inifile/inifile.h ../include/inifile.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/inifile/inifile.hh ../include/inifile.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/linklist/linklist.hh ../include/linklist.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/cmd_msg.hh ../include/cmd_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml.hh ../include/nml.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_mod.hh ../include/nml_mod.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_oi.hh ../include/nml_oi.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_srv.hh ../include/nml_srv.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nml_type.hh ../include/nml_type.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nmldiag.hh ../include/nmldiag.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/nmlmsg.hh ../include/nmlmsg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/nml/stat_msg.hh ../include/stat_msg.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_sem.h ../include/_sem.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/sem.hh ../include/sem.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_shm.h ../include/_shm.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/shm.hh ../include/shm.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/_timer.h ../include/_timer.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/os_intf/timer.hh ../include/timer.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/posemath.h ../include/posemath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/gotypes.h ../include/gotypes.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/gomath.h ../include/gomath.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/posemath/sincos.h ../include/sincos.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs.hh ../include/rcs.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs_exit.hh ../include/rcs_exit.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcs_print.hh ../include/rcs_print.hh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp libnml/rcs/rcsversion.h ../include/rcsversion.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi.h ../include/rtapi.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_app.h ../include/rtapi_app.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_atomic.h ../include/rtapi_atomic.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_bitops.h ../include/rtapi_bitops.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_bool.h ../include/rtapi_bool.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_byteorder.h ../include/rtapi_byteorder.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_device.h ../include/rtapi_device.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_firmware.h ../include/rtapi_firmware.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_gfp.h ../include/rtapi_gfp.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_io.h ../include/rtapi_io.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_limits.h ../include/rtapi_limits.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_list.h ../include/rtapi_list.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math.h ../include/rtapi_math.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math_i386.h ../include/rtapi_math_i386.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_math64.h ../include/rtapi_math64.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_mutex.h ../include/rtapi_mutex.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_parport.h ../include/rtapi_parport.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_pci.h ../include/rtapi_pci.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_slab.h ../include/rtapi_slab.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_stdint.h ../include/rtapi_stdint.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_ctype.h ../include/rtapi_ctype.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_errno.h ../include/rtapi_errno.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_string.h ../include/rtapi_string.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' cp rtapi/rtapi_vsnprintf.h ../include/rtapi_vsnprintf.h make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/da.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/fi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/cs.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/es.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/de.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/fr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/hu.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ja.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/nb.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/pl.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/it.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/pt_BR.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ro.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sk.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sr.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/ru.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/sv.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/vi.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_CN.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_HK.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling localized message catalog objects/zh_TW.msg make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pyvcp Copying python script pyvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_input Copying python script hal_input make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gladevcp Copying python script gladevcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script scorbot-er-3 Copying python script scorbot-er-3 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mitsub_vfd Copying python script mitsub_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pmx485 Copying python script pmx485 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script sim-torch Copying python script sim-torch make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script z_level_compensation Copying python script z_level_compensation make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mqtt-publisher Copying python script mqtt-publisher make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pumagui Copying python script pumagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script puma560gui Copying python script puma560gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script lineardelta Copying python script lineardelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script scaragui Copying python script scaragui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hexagui Copying python script hexagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script 5axisgui Copying python script 5axisgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/sai/driver.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script max5gui Copying python script max5gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script maho600gui Copying python script maho600gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hbmgui Copying python script hbmgui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script rotarydelta Copying python script rotarydelta make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script melfagui Copying python script melfagui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script millturngui Copying python script millturngui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzac-trt-gui Copying python script xyzac-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzab-tdr-gui Copying python script xyzab-tdr-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script xyzbc-trt-gui Copying python script xyzbc-trt-gui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script linuxcnctop Copying python script linuxcnctop make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_manualtoolchange Copying python script hal_manualtoolchange make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script axis-remote Copying python script axis-remote make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script axis Copying python script axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script image-to-gcode Copying python script image-to-gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi Copying python script mdi make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script lintini Copying python script lintini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script teach-in Copying python script teach-in make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script debuglevel Copying python script debuglevel make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script tracking-test Copying python script tracking-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script touchy Copying python script touchy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script hal_interface.py Copying python script hal_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script filechooser.py Copying python script filechooser.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file touchy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script listing.py Copying python script listing.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying linuxcnc-wizard.gif make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/axis/extensions/_toglmodule.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script stepconf Copying python script stepconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file spindle.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file halui_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script import_mach.py Copying python script import_mach.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisx.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisz.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisu.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisv.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file axisa.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' building python init __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_INI.py Copying python script build_INI.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pncconf Copying python script pncconf make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pages.py Copying python script pages.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script build_HAL.py Copying python script build_HAL.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script tests.py Copying python script tests.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file main_page.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file help.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file mesa0.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file start.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script private_data.py Copying python script private_data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file mesa1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file external.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file base.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file screen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file vcp.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file ubuttons.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file thcad.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file x_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file x_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file y_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file y_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file z_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file z_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script data.py Copying python script data.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file a_axis.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file a_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file s_motor.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file options.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file realtime.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport1.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file pport2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file dialogs.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file finished.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gremlin Copying python script gremlin make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gremlin.py Copying python script gremlin.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qt5_graphics.py Copying python script qt5_graphics.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gscreen Copying python script gscreen make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gscreen.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdi.py Copying python script mdi.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script emc_interface.py Copying python script emc_interface.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gscreen2.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script keybindings.py Copying python script keybindings.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pyui Copying python script pyui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script __init__.py Copying python script __init__.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying INI script panelui_spec.ini cp emc/usr_intf/pyui/panelui_spec.ini ../lib/python/pyui/panelui_spec.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script master.py Copying python script master.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying INI script _panelui.ini cp emc/usr_intf/pyui/_panelui.ini ../lib/python/pyui/_panelui.ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/halmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script panelui_validate.py Copying python script panelui_validate.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script commands.py Copying python script commands.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtvcp Copying python script qtvcp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script dialogs.py Copying python script dialogs.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script getiniinfo.py Copying python script getiniinfo.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script notification.py Copying python script notification.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Copying glade file gmoccapy.glade make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script player.py Copying python script player.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script gmoccapy Copying python script gmoccapy make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script preferences.py Copying python script preferences.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script widgets.py Copying python script widgets.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script icon_theme_helper.py Copying python script icon_theme_helper.py make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-plasmac2qt Copying python script qtplasmac-plasmac2qt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-cfg2prefs Copying python script qtplasmac-cfg2prefs make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac-materials Copying python script qtplasmac-materials make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script qtplasmac_gcode Copying python script qtplasmac_gcode make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script pmx485-test Copying python script pmx485-test make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script M190 Copying python script M190 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script mdro Copying python script mdro make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script update_ini Copying python script update_ini make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/debounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/boss_plc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/enum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/counter.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/encoder_ratio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/mux_generic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/lcd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/threads.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/siggen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/supply.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/sim_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/weighted_sum.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/usr_intf/axis/extensions/emcmodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/pid.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/rs274ngc/gcodemodule.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/streamer.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/modmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/components/sampler.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_speaker.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_bb_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/cpuinfo.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_pi_gpio.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/bitfile.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/abs_encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/bspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hostmot2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/dpll.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_ppmc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/hal_gm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/encoder.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/inm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/inmux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/led.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/ioport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/raw.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/rcpwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/pktuart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/lineardeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/resolver.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/ssr.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling emc/kinematics/rotarydeltakins.cc make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/outm.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/tram.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/tp_pwmgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/watchdog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/stepgen.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_pci.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i43.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_7i90.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/xy2mod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/module_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_spi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/setsserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/arrays.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/manager.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/calc_sequential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/arithm_eval.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/symbols.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/sserial.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_rpspi.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/vars_access.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/utils/scope_rt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/drivers/mesa-hostmot2/hm2_eth.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/trivkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/classicladder/calc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/maxkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rotatekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/tripodkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/kins_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/corexykins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/lineardeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/sincos.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/scorbot-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rosekins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/rotarydeltakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/userkfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/pentakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genserkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/switchkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/xyzac-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genhexkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/xyzbc-trt-kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/scarakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/genserfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/trtfuncs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/cubic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/5axiskins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/_posemath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/kinematics/pumakins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime hal/hal_lib.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/emcmotutil.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/stashf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/homemod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/dbuf.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tpmod.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/motion.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tcq.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/homing.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/command.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/spherical_arc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/nml_intf/emcpose.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/motion/control.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' config.status: creating ../scripts/setup_designer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Syntax checking python script halcompile Copying python script halcompile make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/blendmath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking liblinuxcnc.a make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library liblinuxcncini.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime libnml/posemath/gomath.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime emc/tp/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnc_module_helper make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' tooldata: depends: objects/emc/tooldata/tooldata_mmap.o objects/emc/tooldata/tooldata_common.o objects/emc/tooldata/tooldata_db.o tooldata: Linking: libtooldata.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing abs.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module _togl.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library liblinuxcnchal.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing abs_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module lineardeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/lineardeltakins.so objects/emc/kinematics/lineardeltakins.o -lboost_python311-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing and2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing anglejog.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing axistest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bin2gray.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module rotarydeltakins.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/rotarydeltakins.so objects/emc/kinematics/rotarydeltakins.o -lboost_python311-mt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing biquad.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing blend.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bitwise.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bitslice.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing bldc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing carousel.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing charge_pump.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarke2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarkeinv.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing comp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing clarke3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing constant.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_bit_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library libposemath.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_float_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_float_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_s32_u32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing corexy_by_hal.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing conv_u32_s32.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing dbounce.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ddt.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing demux.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing deadzone.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing differential.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing div2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing edge.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing eoffset_per_angle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing estop_latch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing feedcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing flipflop.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing filter_kalman.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gantry.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gearchange.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing gray2bin.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing histobins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing homecomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing hypot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing integ.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ilowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing invert.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing joyhandle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing knob2float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing latencybins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit1.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing limit_axis.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lincurve.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing logic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lowpass.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing lut5.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing maj3.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing match8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing max31855.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_pktgyro_test.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing message.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing minmax.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing millturn.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing moveoff.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mult2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing multiclick.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing multiswitch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux16.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux4.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mux8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing near.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing not.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking rtapi_app make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ohmic.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing offset.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing oneshot.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing or2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing orient.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sample_hold.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing scaled_s32_sums.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing scale.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing select8.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing plasmac.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_axis_hardware.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_home_switch.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_matrix_kb.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_parport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sim_spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing simple_tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sphereprobe.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing spindle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing spindle_monitor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing steptest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing sum2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thc.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing threadtest.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thcud.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing time.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing timedelay.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing timedelta.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tof.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing toggle.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing toggle2nist.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing ton.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tristate_bit.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing updown.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing tristate_float.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing userkins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing wcomp.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xhc_hb04_util.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xor2.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing xyzab_tdr_kins.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing serport.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_7i65.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing mesa_uart.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/abs.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/abs_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/and2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bin2gray.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/axistest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bitslice.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bitwise.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/anglejog.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/biquad.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/charge_pump.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/blend.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarke2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarke3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/clarkeinv.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/comp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/constant.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_bit_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_float_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_float_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/carousel.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_s32_u32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/bldc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/conv_u32_s32.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/corexy_by_hal.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/dbounce.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ddt.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/deadzone.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/demux.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/differential.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/edge.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/div2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/estop_latch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/feedcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/flipflop.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/eoffset_per_angle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/filter_kalman.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gearchange.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gray2bin.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/gantry.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/homecomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/integ.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/histobins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ilowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/hypot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/invert.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/knob2float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit1.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/latencybins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/joyhandle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit_axis.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lincurve.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/logic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/limit3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lowpass.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/lut5.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/maj3.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/match8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/message.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/minmax.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mesa_pktgyro_test.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mult2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/max31855.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/millturn.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/multiswitch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/multiclick.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux16.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux4.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/mux8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/not.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/offset.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/moveoff.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/near.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/or2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ohmic.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/oneshot.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sample_hold.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/orient.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/scale.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/scaled_s32_sums.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/select8.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_home_switch.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_matrix_kb.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sphereprobe.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_parport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/simple_tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sum2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/spindle_monitor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/sim_axis_hardware.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/spindle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/steptest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/threadtest.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/thc.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/thcud.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/timedelay.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/time.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/timedelta.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tof.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/toggle.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/toggle2nist.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/ton.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tristate_bit.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/wcomp.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/tristate_float.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/updown.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/userkins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xor2.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/serport.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xhc_hb04_util.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/xyzab_tdr_kins.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/boss_plc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/debounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/mesa_uart.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/drivers/mesa_7i65.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/enum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/counter.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/stepgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lcd.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/encoder_ratio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pwmgen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux_generic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/siggen.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/threads.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pid.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/supply.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_encoder.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/watchdog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/weighted_sum.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/modmath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/streamer.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sampler.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_speaker.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_ppmc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_bb_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_gm.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_pi_gpio.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_pci.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_7i43.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hostmot2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/setsserial.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_eth.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_7i90.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_spi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hm2_rpspi.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/classicladder_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scope_rt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/trivkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hal_lib.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/maxkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rotatekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tripodkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/corexykins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lineardeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pentakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rosekins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/rotarydeltakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scorbot-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/genhexkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/genserkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzac-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzbc-trt-kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/pumakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf liblinuxcncini.so.0 ../lib/liblinuxcncini.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scarakins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libposemath.so.0 ../lib/libposemath.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf liblinuxcnchal.so.0 ../lib/liblinuxcnchal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/5axiskins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/motmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/homemod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling realtime objects/hal/components/plasmac.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tpmod.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage abs.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage abs_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage and2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage anglejog.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage axistest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bin2gray.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage biquad.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bitwise.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bldc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage blend.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage bitslice.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking inivar make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage carousel.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage charge_pump.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarke2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarke3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage clarkeinv.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage comp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage constant.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_bit_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_float_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_float_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_u32_s32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage conv_s32_u32.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage corexy_by_hal.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage dbounce.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ddt.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage deadzone.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage differential.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage demux.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage div2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage edge.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage estop_latch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage eoffset_per_angle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage feedcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage filter_kalman.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage flipflop.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gantry.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gearchange.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage gray2bin.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage histobins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage homecomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage hypot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ilowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage integ.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage invert.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage joyhandle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage knob2float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage latencybins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit1.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage limit_axis.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lincurve.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage logic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lowpass.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage lut5.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage maj3.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage match8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage max31855.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_pktgyro_test.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage message.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage millturn.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage moveoff.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mult2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage minmax.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage multiclick.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage multiswitch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux16.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux4.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mux8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage near.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage not.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage offset.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ohmic.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage oneshot.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage or2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage orient.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sample_hold.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage scale.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage scaled_s32_sums.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage select8.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage plasmac.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_home_switch.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_axis_hardware.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_matrix_kb.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_parport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sim_spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage simple_tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sphereprobe.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage spindle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage spindle_monitor.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage steptest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage sum2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thc.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thcud.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage threadtest.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage time.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage timedelay.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage timedelta.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tof.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage toggle.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage toggle2nist.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage ton.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tristate_bit.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tristate_float.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage updown.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage userkins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage wcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xhc_hb04_util.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xor2.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage xyzab_tdr_kins.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage tpcomp.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage serport.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_7i65.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage mesa_uart.9 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Making halcompile manpage thermistor.1 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halsampler make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halstreamer make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking panelui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking shuttle make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing thermistor.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hy_gt_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking svd-ps_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking gs2_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking sendkeys make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking xhc-hb04 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking vfs11_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking mb2hal make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halmeter make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing wj200_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Preprocessing pi500_vfd.comp make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking vfdb_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hy_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' emc/Submakefile:Linking genserkins make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halcmd hal/utils/../hal_priv.h:135:27: warning: type of 'hal_data' does not match original declaration [-Wlto-type-mismatch] 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:246:16: note: type 'struct hal_data_t' should match type 'struct hal_data_t' 246 | typedef struct hal_data_t { | ^ hal/utils/../hal_priv.h:135:27: note: 'hal_data' was previously declared here 135 | extern struct hal_data_t *hal_data; | ^ hal/utils/../hal_priv.h:135:27: note: code may be misoptimized unless '-fno-strict-aliasing' is used make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libtooldata.so.0 ../lib/libtooldata.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/abs.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/abs_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halscope make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/and2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/anglejog.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/axistest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bin2gray.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/biquad.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bitslice.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bldc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/bitwise.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/blend.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/carousel.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/charge_pump.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarke2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarke3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/clarkeinv.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking classicladder make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/comp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/constant.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module _hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_bit_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_float_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_float_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_s32_u32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking libpyplugin.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,libpyplugin.so.0 -shared -o ../lib/libpyplugin.so.0 objects/emc/pythonplugin/python_plugin.o ../lib/liblinuxcncini.so -lstdc++ -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/conv_u32_s32.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/corexy_by_hal.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/dbounce.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ddt.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/deadzone.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/div2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/differential.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/demux.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/edge.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking xhc-whb04b-6 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/eoffset_per_angle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/estop_latch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/feedcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/filter_kalman.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/flipflop.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gearchange.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gantry.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/gray2bin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/homecomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/histobins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/hypot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ilowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/integ.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/invert.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/joyhandle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/knob2float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/latencybins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit1.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit_axis.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/limit3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lincurve.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/logic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lowpass.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/lut5.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/maj3.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/match8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/max31855.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_pktgyro_test.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/message.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/millturn.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/minmax.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/moveoff.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mult2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/multiclick.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/multiswitch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux16.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux4.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/near.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mux8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/not.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/offset.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ohmic.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/oneshot.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/or2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/orient.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sample_hold.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/plasmac.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scale.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/scaled_s32_sums.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/select8.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_axis_hardware.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_home_switch.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_matrix_kb.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_parport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sim_spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/simple_tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sphereprobe.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/spindle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/spindle_monitor.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/steptest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/sum2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/thc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/thcud.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/threadtest.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/time.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/timedelay.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/timedelta.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tof.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/toggle.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/toggle2nist.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/ton.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tristate_bit.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/tristate_float.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/updown.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/userkins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/wcomp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xhc_hb04_util.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xor2.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/xyzab_tdr_kins.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_7i65.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/serport.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libpyplugin.so.0 ../lib/libpyplugin.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking ../rtlib/mesa_uart.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling objects/hal/user_comps/thermistor.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/wj200_vfd/wj200_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Compiling hal/user_comps/pi500_vfd/pi500_vfd.c make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking thermistor make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking pi500_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking wj200_vfd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Creating shared library libnml.so.0 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf libnml.so.0 ../lib/libnml.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcncsvr make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcncrsh make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking linuxcnclcd make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking motion-logger make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking schedrmt make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking io make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking librs274.so.0 c++ -std=gnu++17 -g -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -Wl,-soname,librs274.so.0 -shared -o ../lib/librs274.so.0 objects/emc/rs274ngc/interp_arc.o objects/emc/rs274ngc/interp_array.o objects/emc/rs274ngc/interp_base.o objects/emc/rs274ngc/interp_check.o objects/emc/rs274ngc/interp_convert.o objects/emc/rs274ngc/interp_queue.o objects/emc/rs274ngc/interp_cycles.o objects/emc/rs274ngc/interp_execute.o objects/emc/rs274ngc/interp_find.o objects/emc/rs274ngc/interp_internal.o objects/emc/rs274ngc/interp_inverse.o objects/emc/rs274ngc/interp_read.o objects/emc/rs274ngc/interp_write.o objects/emc/rs274ngc/interp_o_word.o objects/emc/rs274ngc/interp_g7x.o objects/emc/rs274ngc/modal_state.o objects/emc/rs274ngc/nurbs_additional_functions.o objects/emc/rs274ngc/interp_namedparams.o objects/emc/rs274ngc/interp_python.o objects/emc/rs274ngc/interp_remap.o objects/emc/rs274ngc/interp_setup.o objects/emc/rs274ngc/canonmodule.o objects/emc/rs274ngc/pyparamclass.o objects/emc/rs274ngc/pyemctypes.o objects/emc/rs274ngc/pyinterp1.o objects/emc/rs274ngc/pyblock.o objects/emc/rs274ngc/pyarrays.o objects/emc/rs274ngc/interpmodule.o objects/emc/rs274ngc/rs274ngc_pre.o objects/emc/rs274ngc/interp_inspection.o ../lib/liblinuxcncini.so ../lib/libpyplugin.so ../lib/liblinuxcnchal.so.0 ../lib/libtooldata.so.0 -lstdc++ -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' ln -sf librs274.so.0 ../lib/librs274.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' emc/tooldata/tool_watch.cc: In function 'int main(int, char**)': emc/tooldata/tool_watch.cc:56:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 56 | fprintf(stderr,"%8ld EMC_STAT\n",sizeof(EMC_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:57:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 57 | fprintf(stderr,"%8ld EMC_IO_STAT\n",sizeof(EMC_IO_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:58:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 58 | fprintf(stderr,"%8ld EMC_TOOL_STAT\n",sizeof(EMC_TOOL_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:59:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 59 | fprintf(stderr,"%8ld EMC_COOLANT_STAT\n",sizeof(EMC_COOLANT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:60:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 60 | fprintf(stderr,"%8ld EMC_AUX_STAT\n",sizeof(EMC_AUX_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:61:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 61 | fprintf(stderr,"%8ld EMC_LUBE_STAT\n",sizeof(EMC_LUBE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:62:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 62 | fprintf(stderr,"%8ld EMC_TASK_STAT\n",sizeof(EMC_TASK_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:63:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 63 | fprintf(stderr,"%8ld EMC_MOTION_STAT\n",sizeof(EMC_MOTION_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:64:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 64 | fprintf(stderr,"%8ld EMC_TRAJ_STAT\n",sizeof(EMC_TRAJ_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:65:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 65 | fprintf(stderr,"%8ld EMC_JOINT_STAT\n",sizeof(EMC_JOINT_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:66:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 66 | fprintf(stderr,"%8ld EMC_AXIS_STAT\n",sizeof(EMC_AXIS_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d emc/tooldata/tool_watch.cc:67:24: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'unsigned int' [-Wformat=] 67 | fprintf(stderr,"%8ld EMC_SPINDLE_STAT\n",sizeof(EMC_SPINDLE_STAT)); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~~ | | | | long int unsigned int | %8d make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking iov2 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking canterp.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking halui make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module gcode.so c++ -std=gnu++17 -ltirpc -Wl,-rpath-link,../lib -ltirpc -shared -o ../lib/python/gcode.so objects/emc/rs274ngc/gcodemodule.o ../lib/librs274.so.0 -lstdc++ make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking python module linuxcnc.so make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking rs274 make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Linking milltask c++ -std=gnu++17 -o ../bin/milltask objects/emc/motion/emcmotglb.o objects/emc/task/emctask.o objects/emc/task/emccanon.o objects/emc/task/emctaskmain.o objects/emc/motion/usrmotintf.o objects/emc/motion/emcmotutil.o objects/emc/task/taskintf.o objects/emc/motion/dbuf.o objects/emc/motion/stashf.o objects/emc/task/taskmodule.o objects/emc/task/taskclass.o objects/emc/task/backtrace.o ../lib/librs274.so.0 ../lib/liblinuxcnc.a ../lib/libnml.so.0 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/liblinuxcnchal.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 -ltirpc -Wl,-rpath-link,../lib -ltirpc -Xlinker -export-dynamic -lboost_python311-mt -L/usr/lib -lpython3.11 -ldl -lm make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' + popd ~/RPM/BUILD/linuxcnc-2.9.1 + exit 0 Executing(%install): /bin/sh -e /usr/src/tmp/rpm-tmp.86534 + umask 022 + /bin/mkdir -p /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + /bin/chmod -Rf u+rwX -- /usr/src/tmp/linuxcnc-buildroot + : + /bin/rm -rf -- /usr/src/tmp/linuxcnc-buildroot + PATH=/usr/libexec/rpm-build:/usr/src/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/games + cd linuxcnc-2.9.1 + pushd src ~/RPM/BUILD/linuxcnc-2.9.1/src ~/RPM/BUILD/linuxcnc-2.9.1 + make 'INSTALL=/usr/libexec/rpm-build/install -p' install DESTDIR=/usr/src/tmp/linuxcnc-buildroot make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' Makefile:107: warning: undefined variable 'BASEPWD' hal/components/Submakefile:1: warning: undefined variable 'KERNELRELEASE' emc/usr_intf/Submakefile:14: warning: undefined variable 'USRMOTSRCS' emc/pythonplugin/Submakefile:11: warning: undefined variable 'TESTSRCS' Makefile:255: warning: undefined variable 'DEBUG' Makefile:265: warning: undefined variable 'TOOL_NML_FLAG' Makefile:266: warning: undefined variable 'TOOL_NML_FLAG' Makefile:877: warning: undefined variable 'KERNELRELEASE' Makefile:894: warning: undefined variable 'KERNELRELEASE' Makefile:922: warning: undefined variable 'MATHSTUB' Makefile:924: warning: undefined variable 'MATHSTUB' Makefile:926: warning: undefined variable 'MATHSTUB' Makefile:928: warning: undefined variable 'MATHSTUB' Makefile:930: warning: undefined variable 'MATHSTUB' Makefile:932: warning: undefined variable 'MATHSTUB' Makefile:934: warning: undefined variable 'MATHSTUB' Makefile:936: warning: undefined variable 'MATHSTUB' Makefile:938: warning: undefined variable 'MATHSTUB' Makefile:940: warning: undefined variable 'MATHSTUB' Makefile:942: warning: undefined variable 'MATHSTUB' Makefile:944: warning: undefined variable 'MATHSTUB' Makefile:946: warning: undefined variable 'MATHSTUB' Makefile:948: warning: undefined variable 'MATHSTUB' Makefile:950: warning: undefined variable 'MATHSTUB' Makefile:952: warning: undefined variable 'MATHSTUB' Makefile:954: warning: undefined variable 'MATHSTUB' Makefile:956: warning: undefined variable 'MATHSTUB' Makefile:958: warning: undefined variable 'MATHSTUB' Makefile:960: warning: undefined variable 'MATHSTUB' Makefile:962: warning: undefined variable 'MATHSTUB' Makefile:966: warning: undefined variable 'MATHSTUB' Makefile:969: warning: undefined variable 'MATHSTUB' Makefile:992: warning: undefined variable 'MATHSTUB' Makefile:994: warning: undefined variable 'MATHSTUB' Makefile:999: warning: undefined variable 'MATHSTUB' Makefile:1003: warning: undefined variable 'MATHSTUB' Makefile:1019: warning: undefined variable 'MATHSTUB' Makefile:1047: warning: undefined variable 'MATHSTUB' Makefile:1051: warning: undefined variable 'MATHSTUB' Makefile:1055: warning: undefined variable 'MATHSTUB' Makefile:1059: warning: undefined variable 'MATHSTUB' Makefile:1062: warning: undefined variable 'MATHSTUB' Makefile:1065: warning: undefined variable 'MATHSTUB' Makefile:1068: warning: undefined variable 'MATHSTUB' Makefile:1072: warning: undefined variable 'MATHSTUB' Makefile:1077: warning: undefined variable 'MATHSTUB' Makefile:1091: warning: undefined variable 'MATHSTUB' Makefile:1094: warning: undefined variable 'MATHSTUB' Makefile:1118: warning: undefined variable 'MATHSTUB' Makefile:1123: warning: undefined variable 'MATHSTUB' Makefile:1150: warning: undefined variable 'MATHSTUB' Makefile:1159: warning: undefined variable 'MATHSTUB' Makefile:1181: warning: undefined variable 'MATHSTUB' Makefile:1189: warning: undefined variable 'MATHSTUB' Makefile:1197: warning: undefined variable 'MATHSTUB' Makefile:1227: warning: undefined variable 'MATHSTUB' Makefile:1232: warning: undefined variable 'abs-objs' Makefile:1232: warning: undefined variable 'abs_s32-objs' Makefile:1232: warning: undefined variable 'and2-objs' Makefile:1232: warning: undefined variable 'anglejog-objs' Makefile:1232: warning: undefined variable 'axistest-objs' Makefile:1232: warning: undefined variable 'bin2gray-objs' Makefile:1232: warning: undefined variable 'biquad-objs' Makefile:1232: warning: undefined variable 'bitslice-objs' Makefile:1232: warning: undefined variable 'bitwise-objs' Makefile:1232: warning: undefined variable 'bldc-objs' Makefile:1232: warning: undefined variable 'blend-objs' Makefile:1232: warning: undefined variable 'carousel-objs' Makefile:1232: warning: undefined variable 'charge_pump-objs' Makefile:1232: warning: undefined variable 'clarke2-objs' Makefile:1232: warning: undefined variable 'clarke3-objs' Makefile:1232: warning: undefined variable 'clarkeinv-objs' Makefile:1232: warning: undefined variable 'comp-objs' Makefile:1232: warning: undefined variable 'constant-objs' Makefile:1232: warning: undefined variable 'conv_bit_float-objs' Makefile:1232: warning: undefined variable 'conv_bit_s32-objs' Makefile:1232: warning: undefined variable 'conv_bit_u32-objs' Makefile:1232: warning: undefined variable 'conv_float_s32-objs' Makefile:1232: warning: undefined variable 'conv_float_u32-objs' Makefile:1232: warning: undefined variable 'conv_s32_bit-objs' Makefile:1232: warning: undefined variable 'conv_s32_float-objs' Makefile:1232: warning: undefined variable 'conv_s32_u32-objs' Makefile:1232: warning: undefined variable 'conv_u32_bit-objs' Makefile:1232: warning: undefined variable 'conv_u32_float-objs' Makefile:1232: warning: undefined variable 'conv_u32_s32-objs' Makefile:1232: warning: undefined variable 'corexy_by_hal-objs' Makefile:1232: warning: undefined variable 'dbounce-objs' Makefile:1232: warning: undefined variable 'ddt-objs' Makefile:1232: warning: undefined variable 'deadzone-objs' Makefile:1232: warning: undefined variable 'demux-objs' Makefile:1232: warning: undefined variable 'differential-objs' Makefile:1232: warning: undefined variable 'div2-objs' Makefile:1232: warning: undefined variable 'edge-objs' Makefile:1232: warning: undefined variable 'eoffset_per_angle-objs' Makefile:1232: warning: undefined variable 'estop_latch-objs' Makefile:1232: warning: undefined variable 'feedcomp-objs' Makefile:1232: warning: undefined variable 'filter_kalman-objs' Makefile:1232: warning: undefined variable 'flipflop-objs' Makefile:1232: warning: undefined variable 'gantry-objs' Makefile:1232: warning: undefined variable 'gearchange-objs' Makefile:1232: warning: undefined variable 'gray2bin-objs' Makefile:1232: warning: undefined variable 'histobins-objs' Makefile:1232: warning: undefined variable 'homecomp-objs' Makefile:1232: warning: undefined variable 'hypot-objs' Makefile:1232: warning: undefined variable 'ilowpass-objs' Makefile:1232: warning: undefined variable 'integ-objs' Makefile:1232: warning: undefined variable 'invert-objs' Makefile:1232: warning: undefined variable 'joyhandle-objs' Makefile:1232: warning: undefined variable 'knob2float-objs' Makefile:1232: warning: undefined variable 'latencybins-objs' Makefile:1232: warning: undefined variable 'limit1-objs' Makefile:1232: warning: undefined variable 'limit2-objs' Makefile:1232: warning: undefined variable 'limit3-objs' Makefile:1232: warning: undefined variable 'limit_axis-objs' Makefile:1232: warning: undefined variable 'lincurve-objs' Makefile:1232: warning: undefined variable 'logic-objs' Makefile:1232: warning: undefined variable 'lowpass-objs' Makefile:1232: warning: undefined variable 'lut5-objs' Makefile:1232: warning: undefined variable 'maj3-objs' Makefile:1232: warning: undefined variable 'match8-objs' Makefile:1232: warning: undefined variable 'max31855-objs' Makefile:1232: warning: undefined variable 'mesa_pktgyro_test-objs' Makefile:1232: warning: undefined variable 'message-objs' Makefile:1232: warning: undefined variable 'millturn-objs' Makefile:1232: warning: undefined variable 'minmax-objs' Makefile:1232: warning: undefined variable 'moveoff-objs' Makefile:1232: warning: undefined variable 'mult2-objs' Makefile:1232: warning: undefined variable 'multiclick-objs' Makefile:1232: warning: undefined variable 'multiswitch-objs' Makefile:1232: warning: undefined variable 'mux16-objs' Makefile:1232: warning: undefined variable 'mux2-objs' Makefile:1232: warning: undefined variable 'mux4-objs' Makefile:1232: warning: undefined variable 'mux8-objs' Makefile:1232: warning: undefined variable 'near-objs' Makefile:1232: warning: undefined variable 'not-objs' Makefile:1232: warning: undefined variable 'offset-objs' Makefile:1232: warning: undefined variable 'ohmic-objs' Makefile:1232: warning: undefined variable 'oneshot-objs' Makefile:1232: warning: undefined variable 'or2-objs' Makefile:1232: warning: undefined variable 'orient-objs' Makefile:1232: warning: undefined variable 'plasmac-objs' Makefile:1232: warning: undefined variable 'sample_hold-objs' Makefile:1232: warning: undefined variable 'scale-objs' Makefile:1232: warning: undefined variable 'scaled_s32_sums-objs' Makefile:1232: warning: undefined variable 'select8-objs' Makefile:1232: warning: undefined variable 'sim_axis_hardware-objs' Makefile:1232: warning: undefined variable 'sim_home_switch-objs' Makefile:1232: warning: undefined variable 'sim_matrix_kb-objs' Makefile:1232: warning: undefined variable 'sim_parport-objs' Makefile:1232: warning: undefined variable 'sim_spindle-objs' Makefile:1232: warning: undefined variable 'simple_tp-objs' Makefile:1232: warning: undefined variable 'sphereprobe-objs' Makefile:1232: warning: undefined variable 'spindle-objs' Makefile:1232: warning: undefined variable 'spindle_monitor-objs' Makefile:1232: warning: undefined variable 'steptest-objs' Makefile:1232: warning: undefined variable 'sum2-objs' Makefile:1232: warning: undefined variable 'thc-objs' Makefile:1232: warning: undefined variable 'thcud-objs' Makefile:1232: warning: undefined variable 'threadtest-objs' Makefile:1232: warning: undefined variable 'time-objs' Makefile:1232: warning: undefined variable 'timedelay-objs' Makefile:1232: warning: undefined variable 'timedelta-objs' Makefile:1232: warning: undefined variable 'tof-objs' Makefile:1232: warning: undefined variable 'toggle-objs' Makefile:1232: warning: undefined variable 'toggle2nist-objs' Makefile:1232: warning: undefined variable 'ton-objs' Makefile:1232: warning: undefined variable 'tp-objs' Makefile:1232: warning: undefined variable 'tristate_bit-objs' Makefile:1232: warning: undefined variable 'tristate_float-objs' Makefile:1232: warning: undefined variable 'updown-objs' Makefile:1232: warning: undefined variable 'userkins-objs' Makefile:1232: warning: undefined variable 'wcomp-objs' Makefile:1232: warning: undefined variable 'xhc_hb04_util-objs' Makefile:1232: warning: undefined variable 'xor2-objs' Makefile:1232: warning: undefined variable 'xyzab_tdr_kins-objs' Makefile:1232: warning: undefined variable 'serport-objs' Makefile:1232: warning: undefined variable 'mesa_7i65-objs' Makefile:1232: warning: undefined variable 'mesa_uart-objs' Makefile:1296: warning: undefined variable 't_on-objs' Makefile:1297: warning: undefined variable 't_off-objs' Makefile:1298: warning: undefined variable 't_p-objs' Makefile:1303: warning: undefined variable 'pci_8255-objs' Makefile:1304: warning: undefined variable 'hal_tiro-objs' Makefile:1305: warning: undefined variable 'hal_stg-objs' Makefile:1306: warning: undefined variable 'hal_vti-objs' Makefile:1307: warning: undefined variable 'hal_evoreg-objs' Makefile:1308: warning: undefined variable 'hal_motenc-objs' Makefile:1309: warning: undefined variable 'hal_ax5214h-objs' Makefile:1311: warning: undefined variable 'hal_skeleton-objs' Makefile:1315: warning: undefined variable 'opto_ac5-objs' make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' make: Entering directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/bin \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../rtlib/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules /usr/libexec/rpm-build/install -p -m 4755 ../bin/linuxcnc_module_helper /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 4755 ../bin/rtapi_app /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../scripts/rtapi.conf /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc/modules \ /usr/src/tmp/linuxcnc-buildroot/etc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/src/tmp/linuxcnc-buildroot/usr/lib \ /usr/src/tmp/linuxcnc-buildroot/lib/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc \ /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles \ /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 \ /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 \ /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels \ /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions \ /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help \ /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ja/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pt_BR/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ro/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/ru/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sv/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_HK/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_TW/LC_MESSAGES/linuxcnc.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/cs/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/da/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/de/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/es/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/fr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/hu/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/it/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/nb/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/pl/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sk/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/sr/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/vi/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES /usr/libexec/rpm-build/install -p -m 0644 ../share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/src/tmp/linuxcnc-buildroot/usr/share/locale/zh_CN/LC_MESSAGES/gmoccapy.mo /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/*.py ../lib/python/*.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/rs274/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274 /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/touchy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gscreen/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/*.{py,ui,txt} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/designer/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/widgets/widget_icons/*.{png,gif} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_icons /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/qtvcp/plugins/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins cp -dR ../lib/python/qtvcp/lib/* /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gmoccapy/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/*.{py,png,glade} /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/stepconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pncconf/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/pyui/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/plasmac/*.py /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac /usr/libexec/rpm-build/install -p -m 0755 ../bin/stepconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pncconf /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_input /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mitsub_vfd /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mqtt-publisher /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/z_level_compensation /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pmx485 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/sim-torch /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pyvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gladevcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/axis-remote /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/debuglevel /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/linuxcnctop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/mdi /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/hal_manualtoolchange /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/image-to-gcode /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/touchy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/gscreen /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtvcp /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../lib/python/qtvcp/designer/install_script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/designer/ /usr/libexec/rpm-build/install -p -m 0755 ../bin/gmoccapy /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/teach-in /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/scorbot-er-3 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/pumagui ../bin/puma560gui ../bin/lineardelta ../bin/scaragui ../bin/hexagui ../bin/5axisgui ../bin/max5gui ../bin/maho600gui ../bin/hbmgui ../bin/rotarydelta ../bin/melfagui ../bin/millturngui ../bin/xyzac-trt-gui ../bin/xyzbc-trt-gui ../bin/xyzab-tdr-gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/qtplasmac-materials ../bin/qtplasmac-plasmac2qt ../bin/qtplasmac-cfg2prefs ../bin/qtplasmac_gcode ../bin/pmx485-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/linuxcnc-wizard.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/images/*.{png,gif,xbm,ngc} /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/images /usr/libexec/rpm-build/install -p -m 0644 ../share/axis/tcl/*.tcl /usr/src/tmp/linuxcnc-buildroot/usr/share/axis/tcl /usr/libexec/rpm-build/install -p -m 0644 ../share/gscreen/images/*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/images cp -dR ../share/gscreen/skins/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins cp -dR ../share/qtvcp/images/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/images cp -dR ../share/qtvcp/screens/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens cp -dR ../share/qtvcp/panels/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels cp -dR ../share/qtvcp/widgets_ui/* /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/widgets_ui cp -dR ../share/gmoccapy/icons/* /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy/icons /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man1/*.1 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man1 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/hal_add_funct_to_thread.3hal ../docs/man/man3/hal_bit_t.3hal ../docs/man/man3/hal_bool.3hal ../docs/man/man3/hal_create_thread.3hal ../docs/man/man3/hal_del_funct_from_thread.3hal ../docs/man/man3/hal_exit.3hal ../docs/man/man3/hal_export_funct.3hal ../docs/man/man3/hal_float_t.3hal ../docs/man/man3/hal_get_lock.3hal ../docs/man/man3/hal_init.3hal ../docs/man/man3/hal_link.3hal ../docs/man/man3/hal_malloc.3hal ../docs/man/man3/hal_param_alias.3hal ../docs/man/man3/hal_param_bit_new.3hal ../docs/man/man3/hal_param_bit_newf.3hal ../docs/man/man3/hal_param_float_new.3hal ../docs/man/man3/hal_param_float_newf.3hal ../docs/man/man3/hal_param_new.3hal ../docs/man/man3/hal_param_s32_new.3hal ../docs/man/man3/hal_param_s32_newf.3hal ../docs/man/man3/hal_param_u32_new.3hal ../docs/man/man3/hal_param_u32_newf.3hal ../docs/man/man3/hal_parport.3hal ../docs/man/man3/hal_pin_alias.3hal ../docs/man/man3/hal_pin_bit_new.3hal ../docs/man/man3/hal_pin_bit_newf.3hal ../docs/man/man3/hal_pin_float_new.3hal ../docs/man/man3/hal_pin_float_newf.3hal ../docs/man/man3/hal_pin_new.3hal ../docs/man/man3/hal_pin_port_new.3hal ../docs/man/man3/hal_pin_port_newf.3hal ../docs/man/man3/hal_pin_s32_new.3hal ../docs/man/man3/hal_pin_s32_newf.3hal ../docs/man/man3/hal_pin_u32_new.3hal ../docs/man/man3/hal_pin_u32_newf.3hal ../docs/man/man3/hal_port.3hal ../docs/man/man3/hal_ready.3hal ../docs/man/man3/hal_s32_t.3hal ../docs/man/man3/hal_set_constructor.3hal ../docs/man/man3/hal_set_lock.3hal ../docs/man/man3/hal_signal_delete.3hal ../docs/man/man3/hal_signal_new.3hal ../docs/man/man3/hal_start_threads.3hal ../docs/man/man3/hal_stream.3hal ../docs/man/man3/hal_type_t.3hal ../docs/man/man3/hal_u32_t.3hal ../docs/man/man3/hal_unlink.3hal ../docs/man/man3/intro.3hal ../docs/man/man3/undocumented.3hal /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man3/EXPORT_FUNCTION.3rtapi ../docs/man/man3/MODULE_AUTHOR.3rtapi ../docs/man/man3/MODULE_DESCRIPTION.3rtapi ../docs/man/man3/MODULE_LICENSE.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi ../docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi ../docs/man/man3/RTAPI_MP_INT.3rtapi ../docs/man/man3/RTAPI_MP_LONG.3rtapi ../docs/man/man3/RTAPI_MP_STRING.3rtapi ../docs/man/man3/intro.3rtapi ../docs/man/man3/rtapi_app_exit.3rtapi ../docs/man/man3/rtapi_app_main.3rtapi ../docs/man/man3/rtapi_atomic.3rtapi ../docs/man/man3/rtapi_bool.3rtapi ../docs/man/man3/rtapi_byteorder.3rtapi ../docs/man/man3/rtapi_clock_set_period.3rtapi ../docs/man/man3/rtapi_delay.3rtapi ../docs/man/man3/rtapi_delay_max.3rtapi ../docs/man/man3/rtapi_device.3rtapi ../docs/man/man3/rtapi_div_u64.3rtapi ../docs/man/man3/rtapi_div_u64_rem.3rtapi ../docs/man/man3/rtapi_exit.3rtapi ../docs/man/man3/rtapi_firmware.3rtapi ../docs/man/man3/rtapi_get_clocks.3rtapi ../docs/man/man3/rtapi_get_msg_level.3rtapi ../docs/man/man3/rtapi_get_time.3rtapi ../docs/man/man3/rtapi_gfp.3rtapi ../docs/man/man3/rtapi_inb.3rtapi ../docs/man/man3/rtapi_init.3rtapi ../docs/man/man3/rtapi_io.3rtapi ../docs/man/man3/rtapi_is.3rtapi ../docs/man/man3/rtapi_list.3rtapi ../docs/man/man3/rtapi_module_param.3rtapi ../docs/man/man3/rtapi_mutex.3rtapi ../docs/man/man3/rtapi_open_as_root.3rtapi ../docs/man/man3/rtapi_outb.3rtapi ../docs/man/man3/rtapi_parport.3rtapi ../docs/man/man3/rtapi_pci.3rtapi ../docs/man/man3/rtapi_print.3rtapi ../docs/man/man3/rtapi_prio.3rtapi ../docs/man/man3/rtapi_prio_highest.3rtapi ../docs/man/man3/rtapi_prio_lowest.3rtapi ../docs/man/man3/rtapi_prio_next_higher.3rtapi ../docs/man/man3/rtapi_prio_next_lower.3rtapi ../docs/man/man3/rtapi_region.3rtapi ../docs/man/man3/rtapi_release_region.3rtapi ../docs/man/man3/rtapi_request_region.3rtapi ../docs/man/man3/rtapi_set_msg_level.3rtapi ../docs/man/man3/rtapi_shmem.3rtapi ../docs/man/man3/rtapi_shmem_delete.3rtapi ../docs/man/man3/rtapi_shmem_getptr.3rtapi ../docs/man/man3/rtapi_shmem_new.3rtapi ../docs/man/man3/rtapi_slab.3rtapi ../docs/man/man3/rtapi_snprintf.3rtapi ../docs/man/man3/rtapi_stdint.3rtapi ../docs/man/man3/rtapi_string.3rtapi ../docs/man/man3/rtapi_strlcpy.3rtapi ../docs/man/man3/rtapi_task_delete.3rtapi ../docs/man/man3/rtapi_task_new.3rtapi ../docs/man/man3/rtapi_task_pause.3rtapi ../docs/man/man3/rtapi_task_resume.3rtapi ../docs/man/man3/rtapi_task_self.3rtapi ../docs/man/man3/rtapi_task_start.3rtapi ../docs/man/man3/rtapi_task_wait.3rtapi ../docs/man/man3/undocumented.3rtapi /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3 /usr/libexec/rpm-build/install -p -m 0644 ../docs/man/man9/abs.9 ../docs/man/man9/abs_s32.9 ../docs/man/man9/and2.9 ../docs/man/man9/anglejog.9 ../docs/man/man9/at_pid.9 ../docs/man/man9/axis.9 ../docs/man/man9/axistest.9 ../docs/man/man9/bin2gray.9 ../docs/man/man9/biquad.9 ../docs/man/man9/bitslice.9 ../docs/man/man9/bitwise.9 ../docs/man/man9/bldc.9 ../docs/man/man9/blend.9 ../docs/man/man9/carousel.9 ../docs/man/man9/charge_pump.9 ../docs/man/man9/clarke2.9 ../docs/man/man9/clarke3.9 ../docs/man/man9/clarkeinv.9 ../docs/man/man9/classicladder.9 ../docs/man/man9/comp.9 ../docs/man/man9/constant.9 ../docs/man/man9/conv_bit_float.9 ../docs/man/man9/conv_bit_s32.9 ../docs/man/man9/conv_bit_u32.9 ../docs/man/man9/conv_float_s32.9 ../docs/man/man9/conv_float_u32.9 ../docs/man/man9/conv_s32_bit.9 ../docs/man/man9/conv_s32_float.9 ../docs/man/man9/conv_s32_u32.9 ../docs/man/man9/conv_u32_bit.9 ../docs/man/man9/conv_u32_float.9 ../docs/man/man9/conv_u32_s32.9 ../docs/man/man9/corexy_by_hal.9 ../docs/man/man9/counter.9 ../docs/man/man9/dbounce.9 ../docs/man/man9/ddt.9 ../docs/man/man9/deadzone.9 ../docs/man/man9/debounce.9 ../docs/man/man9/demux.9 ../docs/man/man9/differential.9 ../docs/man/man9/div2.9 ../docs/man/man9/edge.9 ../docs/man/man9/encoder.9 ../docs/man/man9/encoder_ratio.9 ../docs/man/man9/enum.9 ../docs/man/man9/eoffset_per_angle.9 ../docs/man/man9/estop_latch.9 ../docs/man/man9/feedcomp.9 ../docs/man/man9/filter_kalman.9 ../docs/man/man9/flipflop.9 ../docs/man/man9/gantry.9 ../docs/man/man9/gantrykins.9 ../docs/man/man9/gearchange.9 ../docs/man/man9/genhexkins.9 ../docs/man/man9/genserkins.9 ../docs/man/man9/gentrivkins.9 ../docs/man/man9/gladevcp.9 ../docs/man/man9/gray2bin.9 ../docs/man/man9/hal_bb_gpio.9 ../docs/man/man9/hal_parport.9 ../docs/man/man9/histobins.9 ../docs/man/man9/hm2_7i43.9 ../docs/man/man9/hm2_7i90.9 ../docs/man/man9/hm2_eth.9 ../docs/man/man9/hm2_pci.9 ../docs/man/man9/hm2_rpspi.9 ../docs/man/man9/hm2_spi.9 ../docs/man/man9/homecomp.9 ../docs/man/man9/hostmot2.9 ../docs/man/man9/hypot.9 ../docs/man/man9/ilowpass.9 ../docs/man/man9/integ.9 ../docs/man/man9/invert.9 ../docs/man/man9/joyhandle.9 ../docs/man/man9/kins.9 ../docs/man/man9/knob2float.9 ../docs/man/man9/latencybins.9 ../docs/man/man9/lcd.9 ../docs/man/man9/limit1.9 ../docs/man/man9/limit2.9 ../docs/man/man9/limit3.9 ../docs/man/man9/limit_axis.9 ../docs/man/man9/lincurve.9 ../docs/man/man9/lineardeltakins.9 ../docs/man/man9/logic.9 ../docs/man/man9/lowpass.9 ../docs/man/man9/lut5.9 ../docs/man/man9/maj3.9 ../docs/man/man9/match8.9 ../docs/man/man9/matrix_kb.9 ../docs/man/man9/max31855.9 ../docs/man/man9/maxkins.9 ../docs/man/man9/mesa_7i65.9 ../docs/man/man9/mesa_pktgyro_test.9 ../docs/man/man9/mesa_uart.9 ../docs/man/man9/message.9 ../docs/man/man9/millturn.9 ../docs/man/man9/minmax.9 ../docs/man/man9/motion.9 ../docs/man/man9/moveoff.9 ../docs/man/man9/mult2.9 ../docs/man/man9/multiclick.9 ../docs/man/man9/multiswitch.9 ../docs/man/man9/mux16.9 ../docs/man/man9/mux2.9 ../docs/man/man9/mux4.9 ../docs/man/man9/mux8.9 ../docs/man/man9/mux_generic.9 ../docs/man/man9/near.9 ../docs/man/man9/not.9 ../docs/man/man9/offset.9 ../docs/man/man9/ohmic.9 ../docs/man/man9/oneshot.9 ../docs/man/man9/opto_ac5.9 ../docs/man/man9/or2.9 ../docs/man/man9/orient.9 ../docs/man/man9/pentakins.9 ../docs/man/man9/pid.9 ../docs/man/man9/plasmac.9 ../docs/man/man9/pumakins.9 ../docs/man/man9/pwmgen.9 ../docs/man/man9/rosekins.9 ../docs/man/man9/rotatekins.9 ../docs/man/man9/sample_hold.9 ../docs/man/man9/sampler.9 ../docs/man/man9/scale.9 ../docs/man/man9/scaled_s32_sums.9 ../docs/man/man9/scarakins.9 ../docs/man/man9/select8.9 ../docs/man/man9/serport.9 ../docs/man/man9/setsserial.9 ../docs/man/man9/siggen.9 ../docs/man/man9/sim_axis_hardware.9 ../docs/man/man9/sim_encoder.9 ../docs/man/man9/sim_home_switch.9 ../docs/man/man9/sim_matrix_kb.9 ../docs/man/man9/sim_parport.9 ../docs/man/man9/sim_spindle.9 ../docs/man/man9/simple_tp.9 ../docs/man/man9/sphereprobe.9 ../docs/man/man9/spindle.9 ../docs/man/man9/spindle_monitor.9 ../docs/man/man9/sserial.9 ../docs/man/man9/stepgen.9 ../docs/man/man9/steptest.9 ../docs/man/man9/streamer.9 ../docs/man/man9/sum2.9 ../docs/man/man9/supply.9 ../docs/man/man9/thc.9 ../docs/man/man9/thcud.9 ../docs/man/man9/threads.9 ../docs/man/man9/threadtest.9 ../docs/man/man9/time.9 ../docs/man/man9/timedelay.9 ../docs/man/man9/timedelta.9 ../docs/man/man9/tof.9 ../docs/man/man9/toggle.9 ../docs/man/man9/toggle2nist.9 ../docs/man/man9/ton.9 ../docs/man/man9/tp.9 ../docs/man/man9/tpcomp.9 ../docs/man/man9/tripodkins.9 ../docs/man/man9/tristate_bit.9 ../docs/man/man9/tristate_float.9 ../docs/man/man9/trivkins.9 ../docs/man/man9/updown.9 ../docs/man/man9/userkins.9 ../docs/man/man9/watchdog.9 ../docs/man/man9/wcomp.9 ../docs/man/man9/weighted_sum.9 ../docs/man/man9/xhc_hb04_util.9 ../docs/man/man9/xor2.9 ../docs/man/man9/xyzab_tdr_kins.9 /usr/src/tmp/linuxcnc-buildroot/usr/share/man/man9 /usr/libexec/rpm-build/install -p -m 0644 objects/*.msg /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/msgs /usr/libexec/rpm-build/install -p -m 0755 ../scripts/realtime /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halrun /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halcmd_twopass /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/haltcl /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/simulate_probe /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/sim_pin /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../*.png ../*.gif /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../lib/hallib/* /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/hallib /usr/libexec/rpm-build/install -p -m 0644 ../tcl/*.png /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc # install all the sample configs, including subdirs (tar is required on debian systems, and common on others) /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs ((cd ../configs && tar --exclude CVS --exclude .cvsignore --exclude .gitignore -cf - .) | (cd /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/examples/sample-configs && tar -xf -)) /usr/libexec/rpm-build/install -p -m 0755 ../bin/inivar ../bin/halstreamer ../bin/halsampler ../bin/panelui ../bin/mb2hal ../bin/gs2_vfd ../bin/hy_gt_vfd ../bin/svd-ps_vfd ../bin/shuttle ../bin/xhc-hb04 ../bin/sendkeys ../bin/thermistor ../bin/vfs11_vfd ../bin/classicladder ../bin/halcmd ../bin/halrmt ../bin/halmeter ../bin/halscope ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../bin/vfdb_vfd ../bin/wj200_vfd ../bin/pi500_vfd ../bin/hy_vfd ../bin/xhc-whb04b-6 ../bin/linuxcncrsh ../bin/schedrmt ../bin/linuxcnclcd ../bin/halui ../bin/linuxcncsvr ../bin/milltask ../bin/io ../bin/iov2 ../bin/genserkins ../bin/rs274 ../bin/motion-logger ../bin/tool_mmap_read ../bin/tool_watch ../bin/tooledit ../bin/ngcgui ../bin/pyngcgui ../bin/gremlin_view ../bin/halshow /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_info /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/setup_designer /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcnc_var /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/monitor-xhc-hb04 /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-test /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-plot /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/latency-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/moveoff_gui /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/hal-histogram /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/xhc-hb04-accels /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/pyvcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/gladevcp_demo /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/linuxcncmkdesktop /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../bin/update_ini /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0755 ../scripts/halreport /usr/src/tmp/linuxcnc-buildroot/usr/bin /usr/libexec/rpm-build/install -p -m 0644 ../lib/liblinuxcncini.so.0 ../lib/libposemath.so.0 ../lib/libnml.so.0 ../lib/liblinuxcnchal.so.0 ../lib/liblinuxcnc.a ../lib/librs274.so.0 ../lib/libpyplugin.so.0 ../lib/libtooldata.so.0 /usr/src/tmp/linuxcnc-buildroot/usr/lib cp --no-dereference ../lib/liblinuxcnchal.so ../lib/liblinuxcncini.so ../lib/libnml.so ../lib/libposemath.so ../lib/libpyplugin.so ../lib/librs274.so ../lib/libtooldata.so /usr/src/tmp/linuxcnc-buildroot/usr/lib ldconfig /usr/src/tmp/linuxcnc-buildroot/usr/lib /bin/bash: line 1: ldconfig: command not found make: [Makefile:734: install-kernel-indep] Error 127 (ignored) /usr/libexec/rpm-build/install -p -m 0644 ../lib/linuxcnc/canterp.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../include/linuxcnc.h ../include/emcIniFile.hh ../include/iniaxis.hh ../include/inijoint.hh ../include/inispindle.hh ../include/initraj.hh ../include/inihal.hh ../include/cubic.h ../include/kinematics.h ../include/switchkins.h ../include/genhexkins.h ../include/genserkins.h ../include/pentakins.h ../include/pumakins.h ../include/tc.h ../include/tc_types.h ../include/tcq.h ../include/tp.h ../include/tp_types.h ../include/spherical_arc.h ../include/blendmath.h ../include/emcmotcfg.h ../include/motion.h ../include/homing.h ../include/simple_tp.h ../include/state_tag.h ../include/usrmotintf.h ../include/axis.h ../include/canon.hh ../include/canon_position.hh ../include/emctool.h ../include/emc.hh ../include/emc_nml.hh ../include/emccfg.h ../include/emcglb.h ../include/emcpos.h ../include/emcpose.h ../include/interp_return.hh ../include/interpl.hh ../include/motion_types.h ../include/debugflags.h ../include/interp_internal.hh ../include/interp_fwd.hh ../include/interp_base.hh ../include/modal_state.hh ../include/rs274ngc.hh ../include/saicanon.hh ../include/hal.h ../include/hal_parport.h ../include/hostmot2-serial.h ../include/locmem.hh ../include/memsem.hh ../include/phantom.hh ../include/physmem.hh ../include/recvn.h ../include/rem_msg.hh ../include/sendn.h ../include/shmem.hh ../include/tcpmem.hh ../include/cms.hh ../include/cms_aup.hh ../include/cms_cfg.hh ../include/cms_dup.hh ../include/cms_srv.hh ../include/cms_up.hh ../include/cms_user.hh ../include/cms_xup.hh ../include/cmsdiag.hh ../include/tcp_opts.hh ../include/tcp_srv.hh ../include/inifile.h ../include/inifile.hh ../include/linklist.hh ../include/cmd_msg.hh ../include/nml.hh ../include/nml_mod.hh ../include/nml_oi.hh ../include/nml_srv.hh ../include/nml_type.hh ../include/nmldiag.hh ../include/nmlmsg.hh ../include/stat_msg.hh ../include/_sem.h ../include/sem.hh ../include/_shm.h ../include/shm.hh ../include/_timer.h ../include/timer.hh ../include/posemath.h ../include/gotypes.h ../include/gomath.h ../include/sincos.h ../include/rcs.hh ../include/rcs_exit.hh ../include/rcs_print.hh ../include/rcsversion.h ../include/rtapi.h ../include/rtapi_app.h ../include/rtapi_atomic.h ../include/rtapi_bitops.h ../include/rtapi_bool.h ../include/rtapi_byteorder.h ../include/rtapi_device.h ../include/rtapi_firmware.h ../include/rtapi_gfp.h ../include/rtapi_io.h ../include/rtapi_limits.h ../include/rtapi_list.h ../include/rtapi_math.h ../include/rtapi_math_i386.h ../include/rtapi_math64.h ../include/rtapi_mutex.h ../include/rtapi_parport.h ../include/rtapi_pci.h ../include/rtapi_slab.h ../include/rtapi_stdint.h ../include/rtapi_ctype.h ../include/rtapi_errno.h ../include/rtapi_string.h ../include/rtapi_vsnprintf.h /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/ cp -dR ../nc_files/3D_Chips.html ../nc_files/3D_Chips.ngc ../nc_files/3D_Chips.pdf ../nc_files/3dtest.ngc ../nc_files/M101 ../nc_files/M102.c ../nc_files/arcspiral.ngc ../nc_files/b-index.ngc ../nc_files/cds.ngc ../nc_files/comp-g1.ngc ../nc_files/comp.ngc ../nc_files/comp311.ngc ../nc_files/comp311_2.ngc ../nc_files/cone.ngc ../nc_files/daisy.ngc ../nc_files/factorial.ngc ../nc_files/filtertest-gui.py ../nc_files/filtertest.py ../nc_files/flowsnake.ngc ../nc_files/flowsnake.py ../nc_files/g20sub.ngc ../nc_files/g76.ngc ../nc_files/g881.ngc ../nc_files/g881min.ngc ../nc_files/g882.ngc ../nc_files/gcmc_lib ../nc_files/gladevcp_lib ../nc_files/gmoccapy_2_tools_with_cutter_radius_compensation.ngc ../nc_files/gridprobe.ngc ../nc_files/hole-circle.ngc ../nc_files/holecircle.py ../nc_files/increment.ngc ../nc_files/involute.py ../nc_files/lathe-g76.ngc ../nc_files/lathe_g70_71_demo.ngc ../nc_files/lathe_g7x_face_boring.ngc ../nc_files/lathe_g7x_quadrants.ngc ../nc_files/lathe_pawn.ngc ../nc_files/lathecomp.ngc ../nc_files/m250.ngc ../nc_files/m61demo.ngc ../nc_files/m6demo.ngc ../nc_files/m6remap.ngc ../nc_files/m70m72-demo.ngc ../nc_files/m73-demo.ngc ../nc_files/m75.ngc ../nc_files/m76.ngc ../nc_files/macros ../nc_files/mmount.ngc ../nc_files/nestedcall.ngc ../nc_files/ngcgui_lib ../nc_files/offsets.ngc ../nc_files/orphans ../nc_files/plasmac ../nc_files/plasmatest.ngc ../nc_files/polar.ngc ../nc_files/probe ../nc_files/probe-hole.ngc ../nc_files/remap-subroutines ../nc_files/remap_lib ../nc_files/retval.ngc ../nc_files/roparams.ngc ../nc_files/skeleton.ngc ../nc_files/smartprobe.ngc ../nc_files/spiral.ngc ../nc_files/systems.ngc ../nc_files/testm6fail.ngc ../nc_files/threading.ngc ../nc_files/tool-length-probe.ngc ../nc_files/toplevel.ngc ../nc_files/tort.ngc ../nc_files/torus.png ../nc_files/touchoff.ngc ../nc_files/useful-subroutines.ngc ../nc_files/x-trim.ngc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0755 ../nc_files/M101 /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles /usr/libexec/rpm-build/install -p -m 0644 ../tcl/TkLinuxCNC /usr/src/tmp/linuxcnc-buildroot/etc/X11/app-defaults /usr/libexec/rpm-build/install -p -m 0644 Makefile.modinc /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/linuxcnc.tcl ../tcl/ngcgui.tcl ../tcl/ngcgui_app.tcl ../tcl/ngcgui_ttt.tcl ../tcl/pkgIndex.tcl ../tcl/show_errors.tcl ../tcl/tklinuxcnc.tcl ../tcl/tooledit.tcl ../tcl/twopass.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/hal.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/linuxcnc.so /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../tcl/pkgIndex.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc /usr/libexec/rpm-build/install -p -m 0755 ../tcl/bin/cbutton.tcl ../tcl/bin/emccalib.tcl ../tcl/bin/emcdebug.tcl ../tcl/bin/emctesting.tcl ../tcl/bin/emctuning.tcl ../tcl/bin/genedit.tcl ../tcl/bin/halconfig.tcl ../tcl/bin/halshow.tcl ../tcl/bin/pickconfig.tcl ../tcl/bin/tkbackplot.tcl ../tcl/bin/popimage /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin /usr/libexec/rpm-build/install -p -m 0644 ../tcl/scripts/balloon.tcl ../tcl/scripts/emchelp.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0755 ../tcl/scripts/Set_Coordinates.tcl /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/stepconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/stepconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/touchy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gscreen2.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/gmoccapy/gmoccapy.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/gmoccapy /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/pncconf/*.glade /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/gremlin_view.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../share/linuxcnc/popupkeyboard.ui /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../configs/common/linuxcnc_big.nml /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.txt /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../src/emc/usr_intf/pncconf/pncconf-help/*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/pncconf/pncconf-help /usr/libexec/rpm-build/install -p -m 0644 ../lib/python/gladevcp/hal_python.xml /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/catalogs/ /usr/libexec/rpm-build/install -p -m 0644 ../share/glade/pixmaps/hicolor/22x22/actions/widget*.png /usr/src/tmp/linuxcnc-buildroot/usr/share/glade/pixmaps/hicolor/22x22/actions/ /usr/libexec/rpm-build/install -p -m 0644 ../share/gtksourceview-2.0/language-specs/*.lang /usr/src/tmp/linuxcnc-buildroot/usr/share/gtksourceview-2.0/language-specs/ /usr/libexec/rpm-build/install -p -m 0644 ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ for d in ../share/applications/linuxcnc.desktop ../share/applications/linuxcnc-latency.desktop ../share/applications/linuxcnc-latency-histogram.desktop ../share/applications/linuxcnc-pncconf.desktop ../share/applications/linuxcnc-stepconf.desktop ; do \ /usr/libexec/rpm-build/install -p -m 0644 $d /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/ ; \ done /usr/libexec/rpm-build/install -p -d -m 0755 /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/README.adoc ../docs/INSTALL.adoc ../docs/AUTHORS /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 ../docs/help/asciidoc-markup_es.adoc ../docs/help/rtfaults.adoc ../docs/help/rtfaults_es.adoc ../docs/help/tklinuxcnc.adoc /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/etc/axis_light_background /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc /usr/libexec/rpm-build/install -p -m 0644 emc/usr_intf/axis/README /usr/src/tmp/linuxcnc-buildroot/usr/share/doc/linuxcnc/README.axis make: Leaving directory '/usr/src/RPM/BUILD/linuxcnc-2.9.1/src' + popd ~/RPM/BUILD/linuxcnc-2.9.1 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + cp debian/extras/lib/udev/rules.d/99-shuttle.rules debian/extras/lib/udev/rules.d/99-xhc-whb04b-6.rules debian/extras/lib/udev/rules.d/99-xhc.rules /usr/src/tmp/linuxcnc-buildroot/lib/udev/rules.d + sed 's/Name=/Name=LinuxCNC /g' -i /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop + desktop-file-install --dir /usr/src/tmp/linuxcnc-buildroot/usr/share/applications --remove-key=Version --remove-category=X-CNC --remove-category=Utility /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency-histogram.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-latency.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-pncconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc-stepconf.desktop /usr/src/tmp/linuxcnc-buildroot/usr/share/applications/linuxcnc.desktop + cat + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps + convert linuxcncicon.png -resize 16x16 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/16x16/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps + convert linuxcncicon.png -resize 32x32 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/32x32/apps/linuxcncicon.png + for x in 16 32 48 + mkdir -p /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps + convert linuxcncicon.png -resize 48x48 /usr/src/tmp/linuxcnc-buildroot/usr/share/icons/hicolor/48x48/apps/linuxcncicon.png + pushd /usr/src/tmp/linuxcnc-buildroot/usr/share/man ~/tmp/linuxcnc-buildroot/usr/share/man ~/RPM/BUILD/linuxcnc-2.9.1 ++ find -name '*.?' + xz ./man9/xyzab_tdr_kins.9 ./man9/xor2.9 ./man9/xhc_hb04_util.9 ./man9/weighted_sum.9 ./man9/wcomp.9 ./man9/watchdog.9 ./man9/userkins.9 ./man9/updown.9 ./man9/trivkins.9 ./man9/tristate_float.9 ./man9/tristate_bit.9 ./man9/tripodkins.9 ./man9/tpcomp.9 ./man9/tp.9 ./man9/ton.9 ./man9/toggle2nist.9 ./man9/toggle.9 ./man9/tof.9 ./man9/timedelta.9 ./man9/timedelay.9 ./man9/time.9 ./man9/threadtest.9 ./man9/threads.9 ./man9/thcud.9 ./man9/thc.9 ./man9/supply.9 ./man9/sum2.9 ./man9/streamer.9 ./man9/steptest.9 ./man9/stepgen.9 ./man9/sserial.9 ./man9/spindle_monitor.9 ./man9/spindle.9 ./man9/sphereprobe.9 ./man9/simple_tp.9 ./man9/sim_spindle.9 ./man9/sim_parport.9 ./man9/sim_matrix_kb.9 ./man9/sim_home_switch.9 ./man9/sim_encoder.9 ./man9/sim_axis_hardware.9 ./man9/siggen.9 ./man9/setsserial.9 ./man9/serport.9 ./man9/select8.9 ./man9/scarakins.9 ./man9/scaled_s32_sums.9 ./man9/scale.9 ./man9/sampler.9 ./man9/sample_hold.9 ./man9/rotatekins.9 ./man9/rosekins.9 ./man9/pwmgen.9 ./man9/pumakins.9 ./man9/plasmac.9 ./man9/pid.9 ./man9/pentakins.9 ./man9/orient.9 ./man9/or2.9 ./man9/opto_ac5.9 ./man9/oneshot.9 ./man9/ohmic.9 ./man9/offset.9 ./man9/not.9 ./man9/near.9 ./man9/mux_generic.9 ./man9/mux8.9 ./man9/mux4.9 ./man9/mux2.9 ./man9/mux16.9 ./man9/multiswitch.9 ./man9/multiclick.9 ./man9/mult2.9 ./man9/moveoff.9 ./man9/motion.9 ./man9/minmax.9 ./man9/millturn.9 ./man9/message.9 ./man9/mesa_uart.9 ./man9/mesa_pktgyro_test.9 ./man9/mesa_7i65.9 ./man9/maxkins.9 ./man9/max31855.9 ./man9/matrix_kb.9 ./man9/match8.9 ./man9/maj3.9 ./man9/lut5.9 ./man9/lowpass.9 ./man9/logic.9 ./man9/lineardeltakins.9 ./man9/lincurve.9 ./man9/limit_axis.9 ./man9/limit3.9 ./man9/limit2.9 ./man9/limit1.9 ./man9/lcd.9 ./man9/latencybins.9 ./man9/knob2float.9 ./man9/kins.9 ./man9/joyhandle.9 ./man9/invert.9 ./man9/integ.9 ./man9/ilowpass.9 ./man9/hypot.9 ./man9/hostmot2.9 ./man9/homecomp.9 ./man9/hm2_spi.9 ./man9/hm2_rpspi.9 ./man9/hm2_pci.9 ./man9/hm2_eth.9 ./man9/hm2_7i90.9 ./man9/hm2_7i43.9 ./man9/histobins.9 ./man9/hal_parport.9 ./man9/hal_bb_gpio.9 ./man9/gray2bin.9 ./man9/gladevcp.9 ./man9/gentrivkins.9 ./man9/genserkins.9 ./man9/genhexkins.9 ./man9/gearchange.9 ./man9/gantrykins.9 ./man9/gantry.9 ./man9/flipflop.9 ./man9/filter_kalman.9 ./man9/feedcomp.9 ./man9/estop_latch.9 ./man9/eoffset_per_angle.9 ./man9/enum.9 ./man9/encoder_ratio.9 ./man9/encoder.9 ./man9/edge.9 ./man9/div2.9 ./man9/differential.9 ./man9/demux.9 ./man9/debounce.9 ./man9/deadzone.9 ./man9/ddt.9 ./man9/dbounce.9 ./man9/counter.9 ./man9/corexy_by_hal.9 ./man9/conv_u32_s32.9 ./man9/conv_u32_float.9 ./man9/conv_u32_bit.9 ./man9/conv_s32_u32.9 ./man9/conv_s32_float.9 ./man9/conv_s32_bit.9 ./man9/conv_float_u32.9 ./man9/conv_float_s32.9 ./man9/conv_bit_u32.9 ./man9/conv_bit_s32.9 ./man9/conv_bit_float.9 ./man9/constant.9 ./man9/comp.9 ./man9/classicladder.9 ./man9/clarkeinv.9 ./man9/clarke3.9 ./man9/clarke2.9 ./man9/charge_pump.9 ./man9/carousel.9 ./man9/blend.9 ./man9/bldc.9 ./man9/bitwise.9 ./man9/bitslice.9 ./man9/biquad.9 ./man9/bin2gray.9 ./man9/axistest.9 ./man9/axis.9 ./man9/at_pid.9 ./man9/anglejog.9 ./man9/and2.9 ./man9/abs_s32.9 ./man9/abs.9 ./man1/xyzbc-trt-gui.1 ./man1/xyzac-trt-gui.1 ./man1/xhc-whb04b-6.1 ./man1/xhc-hb04.1 ./man1/xhc-hb04-accels.1 ./man1/wj200_vfd.1 ./man1/vfs11_vfd.1 ./man1/vfdb_vfd.1 ./man1/update_ini.1 ./man1/touchy.1 ./man1/tooledit.1 ./man1/thermistor.1 ./man1/teach-in.1 ./man1/svd-ps_vfd.1 ./man1/stepconf.1 ./man1/simulate_probe.1 ./man1/sim_pin.1 ./man1/sim-torch.1 ./man1/shuttle.1 ./man1/sendkeys.1 ./man1/scorbot-er-3.1 ./man1/schedrmt.1 ./man1/scaragui.1 ./man1/rtapi_app.1 ./man1/rs274.1 ./man1/rotarydelta.1 ./man1/qtvcp.1 ./man1/qtplasmac-setup.1 ./man1/qtplasmac-plasmac2qt.1 ./man1/qtplasmac-materials.1 ./man1/qtplasmac-cfg2prefs.1 ./man1/pyvcp_demo.1 ./man1/pyvcp.1 ./man1/pyui.1 ./man1/pyngcgui.1 ./man1/pumagui.1 ./man1/puma560gui.1 ./man1/pncconf.1 ./man1/pmx485.1 ./man1/pmx485-test.1 ./man1/pi500_vfd.1 ./man1/panelui.1 ./man1/ngcgui.1 ./man1/mqtt-publisher.1 ./man1/moveoff_gui.1 ./man1/motion-logger.1 ./man1/monitor-xhc-hb04.1 ./man1/mitsub_vfd.1 ./man1/milltask.1 ./man1/mdro.1 ./man1/mdi.1 ./man1/mb2hal.1 ./man1/max5gui.1 ./man1/maho600gui.1 ./man1/linuxcnctop.1 ./man1/linuxcncsvr.1 ./man1/linuxcncrsh.1 ./man1/linuxcncmkdesktop.1 ./man1/linuxcnclcd.1 ./man1/linuxcnc_var.1 ./man1/linuxcnc_module_helper.1 ./man1/linuxcnc_info.1 ./man1/linuxcnc.1 ./man1/lineardelta.1 ./man1/latency-test.1 ./man1/latency-plot.1 ./man1/latency-histogram.1 ./man1/iov2.1 ./man1/iocontrol.1 ./man1/io.1 ./man1/inivar.1 ./man1/image-to-gcode.1 ./man1/hy_vfd.1 ./man1/hy_gt_vfd.1 ./man1/hexagui.1 ./man1/hbmgui.1 ./man1/halui.1 ./man1/haltcl.1 ./man1/halstreamer.1 ./man1/halshow.1 ./man1/halscope.1 ./man1/halsampler.1 ./man1/halrun.1 ./man1/halrmt.1 ./man1/halreport.1 ./man1/halmeter.1 ./man1/halcompile.1 ./man1/halcmd_twopass.1 ./man1/halcmd.1 ./man1/hal_manualtoolchange.1 ./man1/hal_input.1 ./man1/hal-histogram.1 ./man1/gscreen.1 ./man1/gs2_vfd.1 ./man1/gremlin_view.1 ./man1/gmoccapy.1 ./man1/gladevcp_demo.1 ./man1/gladevcp.1 ./man1/emccalib.1 ./man1/elbpcom.1 ./man1/debuglevel.1 ./man1/axis.1 ./man1/axis-remote.1 ./man1/5axisgui.1 + popd ~/RPM/BUILD/linuxcnc-2.9.1 + rm /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnc.a + /usr/lib/rpm/find-lang linuxcnc gmoccapy --output=linuxcnc.lang + /usr/lib/rpm/brp-alt Cleaning files in /usr/src/tmp/linuxcnc-buildroot (auto) mode of './usr/bin/rtapi_app' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) mode of './usr/bin/linuxcnc_module_helper' changed from 4755 (rwsr-xr-x) to 4711 (rws--x--x) Verifying and fixing files in /usr/src/tmp/linuxcnc-buildroot (binconfig,pkgconfig,libtool,desktop,gnuconfig) Checking contents of files in /usr/src/tmp/linuxcnc-buildroot/ (default) Compressing files in /usr/src/tmp/linuxcnc-buildroot (auto) removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bit_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_bool.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_del_funct_from_thread.3hal.xz' -> 'hal_add_funct_to_thread.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_float_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_get_lock.3hal.xz' -> 'hal_set_lock.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_link.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_bit_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_float_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_s32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_new.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_param_u32_newf.3hal.xz' -> 'hal_param_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_bit_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_float_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_port_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_s32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_new.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_pin_u32_newf.3hal.xz' -> 'hal_pin_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_s32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_signal_delete.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_u32_t.3hal.xz' -> 'hal_type_t.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/hal_unlink.3hal.xz' -> 'hal_signal_new.3hal.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/EXPORT_FUNCTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_AUTHOR.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_DESCRIPTION.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/MODULE_LICENSE.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_INT.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_LONG.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/RTAPI_MP_STRING.3rtapi.xz' -> 'rtapi_module_param.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_delay_max.3rtapi.xz' -> 'rtapi_delay.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_div_u64_rem.3rtapi.xz' -> 'rtapi_div_u64.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_clocks.3rtapi.xz' -> 'rtapi_get_time.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_get_msg_level.3rtapi.xz' -> 'rtapi_set_msg_level.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_inb.3rtapi.xz' -> 'rtapi_outb.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_highest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_lowest.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_higher.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_prio_next_lower.3rtapi.xz' -> 'rtapi_prio.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_release_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_request_region.3rtapi.xz' -> 'rtapi_region.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_delete.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_getptr.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_shmem_new.3rtapi.xz' -> 'rtapi_shmem.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_delete.3rtapi.xz' -> 'rtapi_task_new.3rtapi.xz' removed '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' '/usr/src/tmp/linuxcnc-buildroot/usr/share/man/man3/rtapi_task_resume.3rtapi.xz' -> 'rtapi_task_pause.3rtapi.xz' Adjusting library links in /usr/src/tmp/linuxcnc-buildroot ./lib: (from :0) ./usr/lib: (from :0) liblinuxcncini.so.0 -> liblinuxcncini.so.0 libposemath.so.0 -> libposemath.so.0 libnml.so.0 -> libnml.so.0 liblinuxcnchal.so.0 -> liblinuxcnchal.so.0 librs274.so.0 -> librs274.so.0 libpyplugin.so.0 -> libpyplugin.so.0 libtooldata.so.0 -> libtooldata.so.0 ./usr/lib/python3/site-packages/qtvcp/lib: (from :0) Verifying ELF objects in /usr/src/tmp/linuxcnc-buildroot (arch=normal,fhs=normal,lfs=relaxed,lint=relaxed,rpath=normal,stack=normal,textrel=normal,unresolved=relaxed) verify-elf: WARNING: ./usr/bin/motion-logger: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/rs274: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/milltask: uses non-LFS functions: fopen freopen stat verify-elf: WARNING: ./usr/bin/linuxcnclcd: uses non-LFS functions: fcntl lstat readdir verify-elf: WARNING: ./usr/bin/hy_vfd: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/vfdb_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halscope: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halrmt: uses non-LFS functions: fcntl fopen stat verify-elf: WARNING: ./usr/bin/halcmd: uses non-LFS functions: fcntl fopen readdir verify-elf: WARNING: ./usr/bin/classicladder: uses non-LFS functions: fcntl fopen open readdir verify-elf: WARNING: ./usr/bin/vfs11_vfd: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/sendkeys: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/xhc-hb04: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/shuttle: uses non-LFS functions: glob open verify-elf: WARNING: ./usr/bin/mb2hal: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/bin/halsampler: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/halstreamer: uses non-LFS functions: open verify-elf: WARNING: ./usr/bin/rtapi_app: uses non-LFS functions: __open_2 fopen mmap open setrlimit stat verify-elf: WARNING: ./usr/bin/linuxcnc_module_helper: uses non-LFS functions: readdir verify-elf: WARNING: ./usr/lib/libtooldata.so.0: uses non-LFS functions: fopen lseek mmap open verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_XOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_BOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_UOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_PROBE_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_MOTION_CONTROL_MODEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_SPEEDi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_BLOCK_DELETEb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16GET_BLOCK_DELETEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14IO_PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SPINDLE_RETRACTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_PLANEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10NURBS_FEEDiSt6vectorI13CONTROL_POINTSaIS0_EEj verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21GET_EXTERNAL_TC_FAULTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10UPDATE_TAG8StateTag verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15RELOAD_TOOLDATAv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23CLEAR_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10CLAMP_AXIS10CANON_AXIS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11LOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_PARAMETER_FILE_NAMEPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z4WAITiiid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Av verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_VOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12START_CHANGEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_COFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Yv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_TRAVERSE_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25SET_OPTIONAL_PROGRAM_STOPb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17GET_EXTERNAL_MISTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24SPINDLE_RETRACT_TRAVERSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z3LOGPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_ANALOG_INPUTid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z27GET_EXTERNAL_OFFSET_APPLIEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_FEED_HOLD_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PARAMETER_FILE_NAMEPci verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_OFFSETSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22SET_NAIVECAM_TOLERANCEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11PLUGIN_CALLiPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_EXTERNAL_LENGTH_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9RIGID_TAPidddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31STOP_CUTTER_RADIUS_COMPENSATIONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8LOGCLOSEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_MODEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_FEED_OVERRIDE_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20CLEAR_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_AXIS_MASKv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z13UNLOCK_ROTARYii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G5X_OFFSETiddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z6FINISHv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_FEED_RATEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18GET_EXTERNAL_FLOODv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ON_RESETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_TRAVERSE_RATEd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14SET_G92_OFFSETddddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Zv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z31GET_EXTERNAL_SELECTED_TOOL_SLOTv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z26GET_EXTERNAL_DIGITAL_INPUTii verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16SET_SPINDLE_MODEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z15SET_XY_ROTATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7LOGOPENPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_ANGLE_UNITSv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z46GET_EXTERNAL_MOTION_CONTROL_NAIVECAM_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20GET_EXTERNAL_SPINDLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Wv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z36GET_EXTERNAL_SPINDLE_OVERRIDE_ENABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32START_CUTTER_RADIUS_COMPENSATIONi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Vv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_AUX_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_YOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z30SET_CUTTER_RADIUS_COMPENSATIONd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Cv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_WOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z9LOGAPPENDPc verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z17DISABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: USER_DEFINED_FUNCTION verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _task verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_AUX_OUTPUT_VALUEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_AOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z24GET_EXTERNAL_QUEUE_EMPTYv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_PROBE_TRIPPED_VALUEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20ENABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: builtin_modules verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18CHANGE_TOOL_NUMBERi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_TOOL_TABLEi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21DISABLE_ADAPTIVE_FEEDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22USE_TOOL_LENGTH_OFFSET7EmcPose verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z32GET_EXTERNAL_TOOL_LENGTH_ZOFFSETv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_PROBE_POSITION_Bv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z21SET_MOTION_OUTPUT_BITi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z16ENABLE_FEED_HOLDv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20SET_TOOL_TABLE_ENTRYii7EmcPosedddi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Xv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z37GET_EXTERNAL_MOTION_CONTROL_TOLERANCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z33GET_EXTERNAL_ADAPTIVE_FEED_ENABLEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z25GET_OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23GET_EXTERNAL_POSITION_Uv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z20USE_NO_SPINDLE_FORCEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z11CANON_ERRORPKcz verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z28WAIT_SPINDLE_ORIENT_COMPLETEid verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z22GET_EXTERNAL_TC_REASONv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z29GET_EXTERNAL_LENGTH_UNIT_TYPEv verify-elf: WARNING: ./usr/lib/librs274.so.0: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/liblinuxcnchal.so.0: uses non-LFS functions: fopen stat verify-elf: WARNING: ./usr/lib/libnml.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/liblinuxcncini.so.0: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXDestroyContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryServerString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDeleteLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glDrawBuffer verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXQueryExtension verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXMakeCurrent verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glFlush verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGetString verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXCreateContext verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXUseXFont verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glGenLists verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXChooseVisual verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXGetConfig verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glViewport verify-elf: WARNING: ./usr/lib/python3/site-packages/_togl.so: undefined symbol: glXSwapBuffers verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/linuxcnc.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/tcl/linuxcnc/hal.so: uses non-LFS functions: fcntl fopen verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z5DWELLd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14TURN_PROBE_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8MIST_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14STRAIGHT_PROBEidddddddddh verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11CHANGE_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21DISABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z30START_SPINDLE_COUNTERCLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z18SET_FEED_REFERENCE20CANON_FEED_REFERENCE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20ENABLE_FEED_OVERRIDEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21STOP_SPEED_FEED_SYNCHv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13STRAIGHT_FEEDiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z9FLOOD_OFFv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8FLOOD_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11PROGRAM_ENDv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22DISABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17STRAIGHT_TRAVERSEiddddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14ORIENT_SPINDLEidi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z20STOP_SPINDLE_TURNINGi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MESSAGEPc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21OPTIONAL_PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z10INIT_CANONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z22START_SPEED_FEED_SYNCHidb verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13TURN_PROBE_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z13SET_FEED_RATEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z16USE_LENGTH_UNITS11CANON_UNITS verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z21ENABLE_SPEED_OVERRIDEi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12PROGRAM_STOPv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23START_SPINDLE_CLOCKWISEii verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z17SET_SPINDLE_SPEEDid verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z11SELECT_TOOLi verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7COMMENTPKc verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z7MIST_ONv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z12SELECT_PLANE11CANON_PLANE verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z23SET_MOTION_CONTROL_MODE17CANON_MOTION_MODEd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z8ARC_FEEDiddddiddddddd verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: undefined symbol: _Z14PALLET_SHUTTLEv verify-elf: WARNING: ./usr/lib/linuxcnc/canterp.so: uses non-LFS functions: fopen verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzbc-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzac-trt-kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xyzab_tdr_kins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xor2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/xhc_hb04_util.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/weighted_sum.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/wcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/watchdog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/userkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/updown.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/trivkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tristate_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tripodkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tpmod.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ton.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle2nist.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/toggle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/tof.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelta.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/timedelay.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/time.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threadtest.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/threads.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thcud.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/thc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/supply.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sum2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_destroy verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/streamer.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/steptest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/stepgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle_monitor.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/spindle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sphereprobe.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/simple_tp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_spindle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_home_switch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_encoder.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sim_axis_hardware.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/siggen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: hm2_get_sserial verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/setsserial.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/serport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/select8.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scorbot-kins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_shmem_base verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_del_funct_from_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scope_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scarakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scaled_s32_sums.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/scale.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_type verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_detach verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_writable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_create verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_element_count verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_write verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_maxdepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sampler.so: undefined symbol: hal_stream_depth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/sample_hold.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotatekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rotarydeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/rosekins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pwmgen.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pumakins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/plasmac.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pid.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/pentakins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/orient.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/or2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/oneshot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ohmic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/offset.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/not.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/near.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux_generic.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux4.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mux16.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiswitch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/multiclick.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mult2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/moveoff.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitch verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_stop_threads verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpRunCycle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_joint_homing_params verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_allhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetMotionType verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetCycleTime verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetTermCond verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsForward verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_index_enable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetRunDir verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: write_homing_out_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_sequence verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpActiveDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecId verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotData verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetSpindleSync verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_synchronized verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_cancel_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsInverse verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_create_thread verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: kinematicsSwitchable verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpGetExecTag verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_needs_unlock_first verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_is_active verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetVlimit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddCircle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetDout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpIsDone verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpPause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpCreate verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddRigidTap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpResume verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_handler verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homeMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: set_unhomed verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tcqFull verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_home_is_idle verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetPos verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpMotFunctions verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAbort verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_home_joint verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: read_homing_in_pins verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAout verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpQueueDepth verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpAddLine verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: get_homing_at_index_search_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: homing_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpSetAmax verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: do_homing verify-elf: WARNING: ./usr/lib/linuxcnc/modules/motmod.so: undefined symbol: tpClear verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/modmath.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/minmax.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_set_unready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/millturn.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/message.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hm2_uart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_uart.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_send verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_read verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_get_pktuart verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_pktgyro_test.so: undefined symbol: hm2_pktuart_setup verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_tram_add_bspi_frame verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_allocate_bspi_tram verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_clear_fifo verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_setup_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_write_chan verify-elf: WARNING: ./usr/lib/linuxcnc/modules/mesa_7i65.so: undefined symbol: hm2_bspi_set_read_function verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maxkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/max31855.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/matrix_kb.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/match8.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/maj3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lut5.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/logic.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lineardeltakins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lincurve.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit_axis.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit3.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/limit1.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/lcd.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/latencybins.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/knob2float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/joyhandle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/invert.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/integ.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ilowpass.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hypot.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_release_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: simple_strtol verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_free verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_u32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_alias verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_request_firmware verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: hal_param_float_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hostmot2.so: undefined symbol: rtapi_argv_split verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homemod.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/homecomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_test.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_spi.so: uses non-LFS functions: open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_rpspi.so: uses non-LFS functions: fopen mmap stat verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_pci.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_task_self verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_eth.so: undefined symbol: rtapi_spawn_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i90.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_unregister verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_delay_max verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hm2_7i43.so: undefined symbol: hm2_register verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/histobins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_speaker.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_ppmc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_pi_gpio.so: uses non-LFS functions: fopen mmap open verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_get verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_comp_name verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_parport_release verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_parport.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_next_lower verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_get_clocks verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_vsnprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_pause verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_task_start verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_clock_set_period verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_prio_highest verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_lib.so: undefined symbol: rtapi_wait verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_iounmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_ioremap_bar verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_register_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_enable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_unregister_driver verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_gm.so: undefined symbol: rtapi_pci_disable_device verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_open_as_root verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/hal_bb_gpio.so: uses non-LFS functions: mmap verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gray2bin.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genserkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/genhexkins.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gearchange.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/gantry.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/flipflop.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/filter_kalman.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/feedcomp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/estop_latch.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/eoffset_per_angle.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/enum.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder_ratio.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/encoder.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/edge.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/div2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/differential.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/demux.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/debounce.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/deadzone.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/ddt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/dbounce.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/counter.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexykins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/corexy_by_hal.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_s32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_float.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_u32_bit.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_float.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_s32_bit.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_float_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_u32.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/conv_bit_float.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/constant.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/comp.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_param_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_delete verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_shmem_getptr verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/classicladder_rt.so: undefined symbol: rtapi_get_time verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarkeinv.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke3.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/clarke2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/charge_pump.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/carousel.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_get_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: rtapi_set_msg_level verify-elf: WARNING: ./usr/lib/linuxcnc/modules/boss_plc.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_param_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/blend.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_param_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bldc.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitwise.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bitslice.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/biquad.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/bin2gray.so: undefined symbol: hal_pin_u32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_param_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/axistest.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: rtapi_print verify-elf: WARNING: ./usr/lib/linuxcnc/modules/anglejog.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/and2.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs_s32.so: undefined symbol: hal_pin_s32_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_bit_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_snprintf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_export_funct verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/abs.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_exit verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_malloc verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_s32_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_init verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_ready verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_float_newf verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print_msg verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: hal_pin_bit_new verify-elf: WARNING: ./usr/lib/linuxcnc/modules/5axiskins.so: undefined symbol: rtapi_print Bytecompiling python3 modules in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py Bytecompiling python3 modules with optimization in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -O compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py Bytecompiling python3 modules with optimization-2 in /usr/src/tmp/linuxcnc-buildroot using /usr/bin/python3 -OO compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gscreen/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/run_from_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_settings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/tooltips.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/updater.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/find.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/wordcount.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/mdi_text.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/__init__.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/filechooser.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/listing.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/mdi.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/multifilebuilder.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyhal.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py compile /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py Hardlinking identical .pyc and .opt-?.pyc files './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/bitfile.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/bwidget.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/gladevcp_makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/glnav.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/glnav.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/gremlin_view.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hal.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hal_glib.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/hershey.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/linux_event.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/linuxcnc_util.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/multifilebuilder.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/nf.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/popupkeyboard.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/propertywindow.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyhal.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/pyvcp_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/__pycache__/qt5_graphics.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/tooldb.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vcpparse.cpython-311.pyc' './usr/lib/python3/site-packages/__pycache__/vismach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/__pycache__/vismach.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/calculatorwidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/combi_dro.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/core.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/drowidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gladebuilder.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/gtk_action.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_actions.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_dial.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_filechooser.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_graph.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_gremlin_plus.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_lightbutton.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_mdihistory.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_meter.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pyngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_pythonplugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_sourceview.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/hal_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/iconview.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/jogwheel.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/led.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/macro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetpage_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/offsetwidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/overridewidget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/persistence.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/speedcontrol.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/state_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/status_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/tooledit_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gladevcp/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/dialogs.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/getiniinfo.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/icon_theme_helper.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/notification.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/player.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gmoccapy/__pycache__/widgets.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/emc_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/keybindings.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/mdi.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/gscreen/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/block.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/bolt_circle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/circle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/ellipse.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/gusset.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/line.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/polygon.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/rectangle.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/run_from_line.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/sector.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/slot.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/star.cpython-311.pyc' './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/plasmac/__pycache__/triangle.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/build_INI.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/data.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/pages.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/private_data.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.pyc' './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pncconf/__pycache__/tests.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/commands.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/master.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/panelui_validate.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/pyui/__pycache__/widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/core.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/logger.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_action.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_istat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makegui.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_makepins.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_pstat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qt_tstat.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/__pycache__/qtvcp_handler.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/audio_player.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/aux_program_loader.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/keybindings.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/machine_log.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/mdi_text.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/message.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/notify.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/toolbar_actions.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/touchoff_subprogram.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/virtual_keyboard.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/auto_height/__pycache__/auto_height.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/facing.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_circle.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/__pycache__/hole_enlarge.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/__pycache__/ngcgui.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/__pycache__/PDFViewer.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/primitives.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/qt_vismach.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/__pycache__/scara.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_block.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_bolt.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_circle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_ellipse.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_gusset.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_line.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_polygon.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_rectangle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_sector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_settings.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_slot.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_star.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conv_triangle.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/conversational.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/set_offsets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/tooltips.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/__pycache__/updater.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/datetime.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/find.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/table.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/lib/writer/ext/__pycache__/wordcount.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/actionbutton_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/basic_probe_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/container_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/detach_tabs_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/dialog_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/graphics_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/hal_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/jogincrements_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/joypad_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/led_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/nurbs_editor_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/overlay_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/qtvcp_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_gauge_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/round_progress_bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/screenoptions_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/simplewidgets_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/state_led_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_adjustment_bar_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_label_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/status_slider_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/tab_widget_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/toolbutton_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/versa_probe_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/virtualkeyboard_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/web_widget_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/plugins/__pycache__/widgets_plugin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_button_round.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/action_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/adjustment_bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/axis_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/bar.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/basic_probe.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/calculator.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/container_widgets.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/detach_tabs.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialogMixin.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dialog_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/dro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/entry_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/fake_status.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/file_manager.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_editor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/gcode_graphics.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/geditor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_input.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/general_hal_output.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/hal_selectionbox.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/image_switcher.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/jog_increments.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/joypad.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/led_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/machine_log.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/macro_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_history.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_line.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/mdi_touchy.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/nurbs_editor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/offset_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/origin_offsetview.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/overlay_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_routines.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/probe_subprog.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/qtvcp_icons.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/radio_axis_selector.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/richtext_selector.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_gauge.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/round_progress.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/runFromLine_dialog.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/screen_options.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/simple_widgets.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/state_led.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_label.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_slider.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/status_stacked.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/stylesheeteditor.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/system_tool_button.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tab_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/tool_offsetview.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/touchEntry.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/versa_probe.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/virtualkeyboard.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/web_widget.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_baseclass.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/widget_switcher.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.pyc' './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/qtvcp/widgets/__pycache__/xembed.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/OpenGLTk.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/glcanon.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/interpret.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.pyc' './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/rs274/__pycache__/options.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_HAL.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/build_INI.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/import_mach.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.pyc' './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/stepconf/__pycache__/pages.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/__init__.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/emc_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/filechooser.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/hal_interface.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/listing.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/mdi.cpython-311.opt-1.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-1.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.pyc' './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-2.pyc' => './usr/lib/python3/site-packages/touchy/__pycache__/preferences.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest-gui.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/filtertest.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/flowsnake.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/holecircle.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/__pycache__/involute.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/__pycache__/stdglue.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/remap.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/stdglue.cpython-311.opt-1.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-1.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.pyc' './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-2.pyc' => './usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/__pycache__/toplevel.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.pyc' './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/cam_align/__pycache__/cam_align_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.pyc' './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/copy/__pycache__/copy_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/qtplasmac_sim/__pycache__/qtplasmac_sim_handler.cpython-311.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.pyc' './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/sim_panel/__pycache__/sim_panel_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.pyc' './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/spindle_belts/__pycache__/spindle_belts_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_button/__pycache__/test_button_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_dial/__pycache__/test_dial_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_led/__pycache__/test_led_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_panel/__pycache__/test_panel_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.pyc' './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/test_probe/__pycache__/test_probe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.pyc' './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/tool_dialog/__pycache__/tool_dialog_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.pyc' './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/versaprobe/__pycache__/versaprobe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_5axis_gantry/__pycache__/vismach_5axis_gantry_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_fanuc_200f/__pycache__/vismach_fanuc_200f_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_mill_xyz/__pycache__/vismach_mill_xyz_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_millturn/__pycache__/vismach_millturn_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_router_atc/__pycache__/vismach_router_atc_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.pyc' './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/panels/vismach_scara/__pycache__/vismach_scara_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.pyc' './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/blender/__pycache__/blender_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc/__pycache__/qt_cnc_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_800x600/__pycache__/qt_cnc_800x600_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qt_cnc_9_axis/__pycache__/qt_cnc_9_axis_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtaxis/__pycache__/qtaxis_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon/__pycache__/qtdragon_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtdragon_hd/__pycache__/qtdragon_hd_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtlathe/__pycache__/qtlathe_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/__pycache__/qtplasmac_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac/languages/__pycache__/qtplasmac.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_4x3/__pycache__/qtplasmac_4x3_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qtplasmac_9x16/__pycache__/qtplasmac_9x16_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.pyc' './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/qttouchy/__pycache__/qttouchy_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.pyc' './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/tester/__pycache__/tester_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.pyc' './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/woodpecker/__pycache__/woodpecker_handler.cpython-311.opt-1.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-1.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.pyc' './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-2.pyc' => './usr/share/qtvcp/screens/x1mill/__pycache__/x1mill_handler.cpython-311.opt-1.pyc' Processing files: linuxcnc-2.9.1-alt1.20231009 warning: File listed twice: /usr/lib/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/canterp.so warning: File listed twice: /usr/lib/linuxcnc/modules warning: File listed twice: /usr/lib/linuxcnc/modules/5axiskins.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs.so warning: File listed twice: /usr/lib/linuxcnc/modules/abs_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/and2.so warning: File listed twice: /usr/lib/linuxcnc/modules/anglejog.so warning: File listed twice: /usr/lib/linuxcnc/modules/axistest.so warning: File listed twice: /usr/lib/linuxcnc/modules/bin2gray.so warning: File listed twice: /usr/lib/linuxcnc/modules/biquad.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitslice.so warning: File listed twice: /usr/lib/linuxcnc/modules/bitwise.so warning: File listed twice: /usr/lib/linuxcnc/modules/bldc.so warning: File listed twice: /usr/lib/linuxcnc/modules/blend.so warning: File listed twice: /usr/lib/linuxcnc/modules/boss_plc.so warning: File listed twice: /usr/lib/linuxcnc/modules/carousel.so warning: File listed twice: /usr/lib/linuxcnc/modules/charge_pump.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke2.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarke3.so warning: File listed twice: /usr/lib/linuxcnc/modules/clarkeinv.so warning: File listed twice: /usr/lib/linuxcnc/modules/classicladder_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/comp.so warning: File listed twice: /usr/lib/linuxcnc/modules/constant.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_bit_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_float_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_s32_u32.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/conv_u32_s32.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexy_by_hal.so warning: File listed twice: /usr/lib/linuxcnc/modules/corexykins.so warning: File listed twice: /usr/lib/linuxcnc/modules/counter.so warning: File listed twice: /usr/lib/linuxcnc/modules/dbounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/ddt.so warning: File listed twice: /usr/lib/linuxcnc/modules/deadzone.so warning: File listed twice: /usr/lib/linuxcnc/modules/debounce.so warning: File listed twice: /usr/lib/linuxcnc/modules/demux.so warning: File listed twice: /usr/lib/linuxcnc/modules/differential.so warning: File listed twice: /usr/lib/linuxcnc/modules/div2.so warning: File listed twice: /usr/lib/linuxcnc/modules/edge.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/encoder_ratio.so warning: File listed twice: /usr/lib/linuxcnc/modules/enum.so warning: File listed twice: /usr/lib/linuxcnc/modules/eoffset_per_angle.so warning: File listed twice: /usr/lib/linuxcnc/modules/estop_latch.so warning: File listed twice: /usr/lib/linuxcnc/modules/feedcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/filter_kalman.so warning: File listed twice: /usr/lib/linuxcnc/modules/flipflop.so warning: File listed twice: /usr/lib/linuxcnc/modules/gantry.so warning: File listed twice: /usr/lib/linuxcnc/modules/gearchange.so warning: File listed twice: /usr/lib/linuxcnc/modules/genhexkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/genserkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/gray2bin.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_bb_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_gm.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_lib.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_pi_gpio.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_ppmc.so warning: File listed twice: /usr/lib/linuxcnc/modules/hal_speaker.so warning: File listed twice: /usr/lib/linuxcnc/modules/histobins.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i43.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_7i90.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_eth.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_pci.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_rpspi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_spi.so warning: File listed twice: /usr/lib/linuxcnc/modules/hm2_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/homecomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/homemod.so warning: File listed twice: /usr/lib/linuxcnc/modules/hostmot2.so warning: File listed twice: /usr/lib/linuxcnc/modules/hypot.so warning: File listed twice: /usr/lib/linuxcnc/modules/ilowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/integ.so warning: File listed twice: /usr/lib/linuxcnc/modules/invert.so warning: File listed twice: /usr/lib/linuxcnc/modules/joyhandle.so warning: File listed twice: /usr/lib/linuxcnc/modules/knob2float.so warning: File listed twice: /usr/lib/linuxcnc/modules/latencybins.so warning: File listed twice: /usr/lib/linuxcnc/modules/lcd.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit1.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit2.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit3.so warning: File listed twice: /usr/lib/linuxcnc/modules/limit_axis.so warning: File listed twice: /usr/lib/linuxcnc/modules/lincurve.so warning: File listed twice: /usr/lib/linuxcnc/modules/lineardeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/linuxcnc warning: File listed twice: /usr/lib/linuxcnc/modules/logic.so warning: File listed twice: /usr/lib/linuxcnc/modules/lowpass.so warning: File listed twice: /usr/lib/linuxcnc/modules/lut5.so warning: File listed twice: /usr/lib/linuxcnc/modules/maj3.so warning: File listed twice: /usr/lib/linuxcnc/modules/match8.so warning: File listed twice: /usr/lib/linuxcnc/modules/matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/max31855.so warning: File listed twice: /usr/lib/linuxcnc/modules/maxkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_7i65.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_pktgyro_test.so warning: File listed twice: /usr/lib/linuxcnc/modules/mesa_uart.so warning: File listed twice: /usr/lib/linuxcnc/modules/message.so warning: File listed twice: /usr/lib/linuxcnc/modules/millturn.so warning: File listed twice: /usr/lib/linuxcnc/modules/minmax.so warning: File listed twice: /usr/lib/linuxcnc/modules/modmath.so warning: File listed twice: /usr/lib/linuxcnc/modules/motmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/moveoff.so warning: File listed twice: /usr/lib/linuxcnc/modules/mult2.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiclick.so warning: File listed twice: /usr/lib/linuxcnc/modules/multiswitch.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux16.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux2.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux4.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux8.so warning: File listed twice: /usr/lib/linuxcnc/modules/mux_generic.so warning: File listed twice: /usr/lib/linuxcnc/modules/near.so warning: File listed twice: /usr/lib/linuxcnc/modules/not.so warning: File listed twice: /usr/lib/linuxcnc/modules/offset.so warning: File listed twice: /usr/lib/linuxcnc/modules/ohmic.so warning: File listed twice: /usr/lib/linuxcnc/modules/oneshot.so warning: File listed twice: /usr/lib/linuxcnc/modules/or2.so warning: File listed twice: /usr/lib/linuxcnc/modules/orient.so warning: File listed twice: /usr/lib/linuxcnc/modules/pentakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pid.so warning: File listed twice: /usr/lib/linuxcnc/modules/plasmac.so warning: File listed twice: /usr/lib/linuxcnc/modules/pumakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/pwmgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/rosekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotarydeltakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/rotatekins.so warning: File listed twice: /usr/lib/linuxcnc/modules/sample_hold.so warning: File listed twice: /usr/lib/linuxcnc/modules/sampler.so warning: File listed twice: /usr/lib/linuxcnc/modules/scale.so warning: File listed twice: /usr/lib/linuxcnc/modules/scaled_s32_sums.so warning: File listed twice: /usr/lib/linuxcnc/modules/scarakins.so warning: File listed twice: /usr/lib/linuxcnc/modules/scope_rt.so warning: File listed twice: /usr/lib/linuxcnc/modules/scorbot-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/select8.so warning: File listed twice: /usr/lib/linuxcnc/modules/serport.so warning: File listed twice: /usr/lib/linuxcnc/modules/setsserial.so warning: File listed twice: /usr/lib/linuxcnc/modules/siggen.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_axis_hardware.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_encoder.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_home_switch.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_matrix_kb.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_parport.so warning: File listed twice: /usr/lib/linuxcnc/modules/sim_spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/simple_tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/sphereprobe.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle.so warning: File listed twice: /usr/lib/linuxcnc/modules/spindle_monitor.so warning: File listed twice: /usr/lib/linuxcnc/modules/stepgen.so warning: File listed twice: /usr/lib/linuxcnc/modules/steptest.so warning: File listed twice: /usr/lib/linuxcnc/modules/streamer.so warning: File listed twice: /usr/lib/linuxcnc/modules/sum2.so warning: File listed twice: /usr/lib/linuxcnc/modules/supply.so warning: File listed twice: /usr/lib/linuxcnc/modules/thc.so warning: File listed twice: /usr/lib/linuxcnc/modules/thcud.so warning: File listed twice: /usr/lib/linuxcnc/modules/threads.so warning: File listed twice: /usr/lib/linuxcnc/modules/threadtest.so warning: File listed twice: /usr/lib/linuxcnc/modules/time.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelay.so warning: File listed twice: /usr/lib/linuxcnc/modules/timedelta.so warning: File listed twice: /usr/lib/linuxcnc/modules/tof.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle.so warning: File listed twice: /usr/lib/linuxcnc/modules/toggle2nist.so warning: File listed twice: /usr/lib/linuxcnc/modules/ton.so warning: File listed twice: /usr/lib/linuxcnc/modules/tp.so warning: File listed twice: /usr/lib/linuxcnc/modules/tpmod.so warning: File listed twice: /usr/lib/linuxcnc/modules/tripodkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_bit.so warning: File listed twice: /usr/lib/linuxcnc/modules/tristate_float.so warning: File listed twice: /usr/lib/linuxcnc/modules/trivkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/updown.so warning: File listed twice: /usr/lib/linuxcnc/modules/userkins.so warning: File listed twice: /usr/lib/linuxcnc/modules/watchdog.so warning: File listed twice: /usr/lib/linuxcnc/modules/wcomp.so warning: File listed twice: /usr/lib/linuxcnc/modules/weighted_sum.so warning: File listed twice: /usr/lib/linuxcnc/modules/xhc_hb04_util.so warning: File listed twice: /usr/lib/linuxcnc/modules/xor2.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzab_tdr_kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzac-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so warning: File listed twice: /usr/lib/linuxcnc/realtime Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.0e5DXz find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.prov.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/involute.py provides python3(involute)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py provides python3(holecircle)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/flowsnake.py provides python3(flowsnake)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py provides python3(filtertest)(under non-std path /usr/share/linuxcnc/ncfiles) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py provides python3(screens.x1mill.x1mill_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py provides python3(screens.woodpecker.woodpecker_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py provides python3(screens.tester.tester_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py provides python3(screens.qttouchy.qttouchy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py provides python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py provides python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py provides python3(screens.qtplasmac.qtplasmac_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py provides python3(screens.qtplasmac.languages.qtplasmac)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py provides python3(screens.qtlathe.qtlathe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py provides python3(screens.qtdragon_hd.qtdragon_hd_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py provides python3(screens.qtdragon.qtdragon_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py provides python3(screens.qtaxis.qtaxis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py provides python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py provides python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py provides python3(screens.qt_cnc.qt_cnc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py provides python3(screens.blender.blender_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py provides python3(panels.vismach_scara.vismach_scara_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py provides python3(panels.vismach_router_atc.vismach_router_atc_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py provides python3(panels.vismach_millturn.vismach_millturn_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py provides python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py provides python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py provides python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py provides python3(panels.versaprobe.versaprobe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py provides python3(panels.tool_dialog.tool_dialog_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py provides python3(panels.test_probe.test_probe_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py provides python3(panels.test_panel.test_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py provides python3(panels.test_led.test_led_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py provides python3(panels.test_dial.test_dial_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py provides python3(panels.test_button.test_button_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py provides python3(panels.spindle_belts.spindle_belts_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py provides python3(panels.sim_panel.sim_panel_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py provides python3(panels.qtplasmac_sim.qtplasmac_sim_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py provides python3(panels.copy.copy_handler)(under non-std path /usr/share/qtvcp) /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py provides python3(panels.cam_align.cam_align_handler)(under non-std path /usr/share/qtvcp) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.9R8503 find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gcode.so: underlinked libraries: /usr/lib/libpython3.11.so.1.0 lib.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/linuxcnc.so: underlinked libraries: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0 python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/9_axis/9_axis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis/gaxis_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/industrial/industrial_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/silverdragon/silverdragon_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/spartan/spartan_handler.py: ASCII English text (SKIP) python3.req.files: /usr/src/tmp/linuxcnc-buildroot/usr/share/gscreen/skins/tester/tester_handler.py: ASCII Java program text (SKIP) py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3prov: detected potential module:vismach.py py3prov: detected potential module:vcpparse.py py3prov: detected potential module:touchy py3prov: detected potential module:tooldb.py py3prov: detected potential module:stepconf py3prov: detected potential module:rs274 py3prov: detected potential module:rotarydeltakins.so py3prov: detected potential module:qtvcp py3prov: detected potential module:qt5_graphics.py py3prov: detected potential module:pyvcp_widgets.py py3prov: detected potential module:pyui py3prov: detected potential module:pyngcgui.py py3prov: detected potential module:pyhal.py py3prov: detected potential module:propertywindow.py py3prov: detected potential module:popupkeyboard.py py3prov: detected potential module:pncconf py3prov: detected potential module:plasmac py3prov: detected potential module:nf.py py3prov: detected potential module:multifilebuilder.py py3prov: detected potential module:linuxcnc_util.py py3prov: detected potential module:linuxcnc.so py3prov: detected potential module:linux_event.py py3prov: detected potential module:lineardeltakins.so py3prov: detected potential module:hershey.py py3prov: detected potential module:hal_glib.py py3prov: detected potential module:hal.py py3prov: detected potential module:gscreen py3prov: detected potential module:gremlin_view.py py3prov: detected potential module:gremlin.py py3prov: detected potential module:gmoccapy py3prov: detected potential module:glnav.py py3prov: detected potential module:gladevcp_makepins.py py3prov: detected potential module:gladevcp py3prov: detected potential module:gcode.so py3prov: detected potential module:bwidget.py py3prov: detected potential module:bitfile.py py3prov: detected potential module:_togl.so py3prov: detected potential module:_hal.so py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/5axisgui: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "atexit" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "errno" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: skipping "_thread" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "gcode" lines:[59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.OpenGLTk" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.interpret" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hershey" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "propertywindow" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "rs274.options" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "nf" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "bwidget" lines:[69] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "linuxcnc" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "glnav" lines:[72] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "hal" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "subprocess" lines:[[1113], [[3960]], [4032]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "webbrowser" lines:[[[2086]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis: "vcpparse" lines:[[[3924]], [[[4047]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/axis-remote: skipping "_thread" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "linuxcnc" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: skipping "time" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/debuglevel: "rs274.options" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: skipping "sys" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "hal" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.makepins" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.gladebuilder" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gladevcp: "gladevcp.core" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "hal_glib" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "sys" lines:[40] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "atexit" lines:[42] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "linuxcnc" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: skipping "time" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "qtvcp" lines:[[5723]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.makepins" lines:[[5745]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gladevcp.combi_dro" lines:[[5746]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gmoccapy: "gmoccapy" lines:[[5747, 5748, 5749, 5750, 5751, 5752], [[5754]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gremlin_view: "gremlin_view" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "qtvcp" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal" lines:[92] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "errno" lines:[93] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gladevcp.makepins" lines:[94] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "atexit" lines:[96] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: skipping "time" lines:[97, 98] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "hal_glib" lines:[99] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "linuxcnc" lines:[197] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gscreen" lines:[198, 199, 200, 201] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "gi.repository" lines:[[119], [131], [141]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "distro" lines:[[[165]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "inspect" lines:[[[889]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "collections" lines:[[[890]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/gscreen: "subprocess" lines:[[[3941]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "linux_event" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: "hal" lines:[22, 28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_input: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "nf" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hal_manualtoolchange: "rs274.options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "sys" lines:[22, 402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/halcompile: skipping "time" lines:[402] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hbmgui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: "hal" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/hexagui: skipping "sys" lines:[12] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.author" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "rs274.options" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "PIL" lines:[[29], [[502]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "Image" lines:[[[31]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter" lines:[[499], [[757]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "pickle" lines:[[506]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "nf" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "ImageTk" lines:[[[[504]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/image-to-gcode: "tkinter.filedialog" lines:[[[758]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "vismach" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: "lineardeltakins" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/lineardelta: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "sys" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "linuxcnc" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "rs274.options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "tkinter" lines:[[122]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnctop: "_tkinter" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/maho600gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/max5gui: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mdi: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "vismach" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/melfagui: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/millturngui: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "hal" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "getopt" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mitsub_vfd: "sys" lines:[[348]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/modcompile: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: skipping "time" lines:[31] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "hal" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "linuxcnc" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "paho.mqtt.client" lines:[[[[53]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/mqtt-publisher: "optparse" lines:[[[118]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485: skipping "time" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pmx485-test: "serial.tools.list_ports" lines:[[32]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "errno" lines:[38] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: skipping "time" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "copy" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "multifilebuilder" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "touchy" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "pncconf" lines:[54, 55, 56, 57, 58, 59] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pncconf: "hal" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/puma560gui: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "vismach" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pumagui: "hal" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyngcgui: "pyngcgui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyui: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: skipping "sys" lines:[37] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "vcpparse" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/pyvcp: "hal" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-cfg2prefs: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-materials: "json" lines:[[[[[[336]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "sys" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac-plasmac2qt: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: skipping "time" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "tkinter" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtCore" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtGui" lines:[[39]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtplasmac_gcode: "PyQt5.QtWidgets" lines:[[40]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebEngineWidgets" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "PyQt5.QtWebKitWidgets" lines:[[[[18]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp" lines:[[[117]], [523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "linuxcnc" lines:[[[[152]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.lib" lines:[[[[[329]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/qtvcp: "qtvcp.core" lines:[[[450]], [543]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: "rotarydeltakins" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/rotarydelta: skipping "sys" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "vismach" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scaragui: skipping "sys" lines:[22] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: "hal" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/scorbot-er-3: skipping "time" lines:[36] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/sim-torch: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "hal" lines:[35, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "errno" lines:[39] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: skipping "time" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "multifilebuilder" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "stepconf" lines:[116, 117, 118] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "defusedexpat" lines:[[47]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/stepconf: "xml.parsers" lines:[[[49]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/teach-in: skipping "sys" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "sys" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "atexit" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: skipping "time" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "linuxcnc" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "touchy" lines:[62, 63, 64, 65, 66, 67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/touchy: "subprocess" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "linuxcnc" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/update_ini: "datetime" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "vismach" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: "hal" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzab-tdr-gui: skipping "sys" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzac-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "vismach" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/xyzbc-trt-gui: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "linuxcnc" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/bin/z_level_compensation: "scipy.interpolate" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bitfile.py: "sys" lines:[[112]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/bwidget.py: skipping "sys" lines:[33] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "gladevcp.hal_pythonplugin" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/__init__.py: "importlib" lines:[[4]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "linuxcnc" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py: "hal_glib" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py: "gladevcp.gtk_action" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "linuxcnc" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py: "qtvcp" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "hal" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "gladevcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "sys" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "time" lines:[828] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: skipping "atexit" lines:[829] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "subprocess" lines:[[[601], [617]], [[838]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gtk_action.py: "qtvcp.core" lines:[[915]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.core" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_bar.py: "gladevcp.hal_widgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py: "gladevcp.hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: skipping "atexit" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "gladevcp.hal_actions" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py: "subprocess" lines:[[[37]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "hal_widgets" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_graph.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "linuxcnc" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gremlin" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "rs274.glcanon" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gcode" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_glib" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "hal_actions" lines:[[41]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "gladevcp.hal_actions" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py: "subprocess" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gremlin_view" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py: "gladevcp" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "hal_widgets" lines:[[46]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_lightbutton.py: "gladevcp.hal_widgets" lines:[[48]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_glib" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.core" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "hal_actions" lines:[[28]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_widgets" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py: "gladevcp.hal_actions" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_meter.py: "gladevcp.hal_widgets" lines:[[27]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "pyngcgui" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py: "gladevcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_widgets" lines:[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.status_label" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.state_label" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.led" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.calculatorwidget" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.tooledit_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.drowidget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.iconview" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.combi_dro" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetwidget" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.offsetpage_widget" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_bar" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_meter" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_graph" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_lightbutton" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.overridewidget" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.jogwheel" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.speedcontrol" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_dial" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_actions" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_filechooser" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_sourceview" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_mdihistory" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.macro_widget" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_pyngcgui" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pythonplugin.py: "gladevcp.hal_gremlin_plus" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: skipping "time" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "linuxcnc" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "hal_glib" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_widgets" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_actions" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "gladevcp.hal_filechooser" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "os" lines:[[299]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py: "tempfile" lines:[[299]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_widgets.py: "hal" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py: "qtvcp" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "hal_widgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py: "gladevcp.hal_widgets" lines:[[35]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "hal_widgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/led.py: "gladevcp.hal_widgets" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_actions" lines:[[30]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "hal_widgets" lines:[[31]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_actions" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py: "gladevcp.hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "hal_glib" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.gladebuilder" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.hal_widgets" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py: "gladevcp.led" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py: "hal_glib" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.gladebuilder" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_widgets" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py: "gladevcp.hal_actions" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "hal_widgets" lines:[[34]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py: "gladevcp.hal_widgets" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_glib" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "hal_widgets" lines:[[24]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/state_label.py: "gladevcp.hal_widgets" lines:[[26]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_glib" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "hal_widgets" lines:[[23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/status_label.py: "gladevcp.hal_widgets" lines:[[25]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib" lines:[[16], [73]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.xobject" lines:[[17], [74]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py: "Xlib.protocol" lines:[[72]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp_makepins.py: "gladevcp.makepins" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "itertools" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi" lines:[[9]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "gi.repository" lines:[[12, 13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/glnav.py: "cairo" lines:[[15]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py: "gladevcp" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "linuxcnc" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py: "qtvcp" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "gmoccapy" lines:[[38]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py: "icon_theme_helper" lines:[[[40]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py: "gi.repository" lines:[[36]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "sys" lines:[46] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "glnav" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.glcanon" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "rs274.interpret" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "linuxcnc" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "gcode" lines:[66] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "time" lines:[68] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: skipping "_thread" lines:[74] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py: "Xlib.display" lines:[[56]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "sys" lines:[80] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "gladevcp.hal_actions" lines:[81] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "linuxcnc" lines:[82] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: skipping "time" lines:[83] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py: "getopt" lines:[[507]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py: "_hal" lines:[30, 31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "_hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hershey.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linux_event.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: "linuxcnc" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "sys" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/linuxcnc_util.py: skipping "time" lines:[8] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/nf.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/block.py: skipping "sys" lines:[29] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/bolt_circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/circle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/ellipse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/gusset.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/line.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/polygon.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/rectangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/sector.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/slot.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/star.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/plasmac/triangle.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py: "configparser" lines:[[[1960]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_INI.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: "linuxcnc" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py: skipping "sys" lines:[57] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/propertywindow.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: skipping "sys" lines:[62] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "linuxcnc" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[71] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "hal" lines:[73] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp" lines:[74] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gladevcp.hal_filechooser" lines:[[212]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "gi.repository.GdkPixbuf" lines:[[456]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "popupkeyboard" lines:[[[[2987]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py: "glib" lines:[[[[2988]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/__init__.py: "pyui" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/commands.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "hal" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "pyui" lines:[[[35]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py: "zmq" lines:[[[[[[94]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/panelui_validate.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/widgets.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "sys" lines:[49] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "hal" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "bwidget" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: skipping "time" lines:[55] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "vcpparse" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.dom.minidom" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "xml.parsers.expat" lines:[[[1705]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyvcp_widgets.py: "rs274.options" lines:[[[1745]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: skipping "_thread" lines:[28] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "glnav" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "rs274" lines:[31, 32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "linuxcnc" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "gcode" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "qtvcp.widgets.fake_status" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "PyQt5.QtOpenGL" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py: "OpenGL" lines:[[22, 23]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "linuxcnc" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "_hal" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "hal_glib" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_istat" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_pstat" lines:[286] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_action" lines:[300] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp.qt_tstat" lines:[316] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "qtvcp.core" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi" lines:[[31], [279]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "gi.repository" lines:[[33], [280]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "espeak" lines:[[54]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "queue" lines:[[55]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py: "distro" lines:[[[[98]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "hal" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: skipping "time" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/aux_program_loader.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/colored_formatter.py: "logging" lines:[[116]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: skipping "atexit" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "linuxcnc" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: skipping "atexit" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "linuxcnc" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "sys" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: skipping "atexit" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.qt_makegui" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcodes.py: "qtvcp.lib" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/keybindings.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp.core" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/machine_log.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "hal" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "sys" lines:[[189]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/message.py: "PyQt5.QtCore" lines:[[190]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp.lib" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/notify.py: "qtvcp" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "qtvcp" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py: "gladevcp.hal_filechooser" lines:[[879]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_pdf/PDFViewer.py: "popplerqt5" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/fanuc_200f.py: "hal" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: "hal" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/gantry_5axis.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/mill_xyz.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/millturn.py: skipping "sys" lines:[9] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "hal" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: skipping "itertools" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "gi.repository" lines:[[13, 14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/primitives.py: "cairo" lines:[[16]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py: "qtvcp.lib.qt_vismach.primitives" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_block.py: skipping "plasmac" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_bolt.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_circle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_ellipse.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_gusset.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_line.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_polygon.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_rectangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_sector.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_slot.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_star.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conv_triangle.py: skipping "plasmac" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/conversational.py: "qtvcp.lib.qtplasmac" lines:[29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qtplasmac/set_offsets.py: "cv2" lines:[[[270]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: skipping "sys" lines:[97] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter" lines:[[101]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.filedialog" lines:[[102]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.messagebox" lines:[[103]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "Tkinter" lines:[[105]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFileDialog" lines:[[106]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkMessageBox" lines:[[107]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "psyco" lines:[[114]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkFont" lines:[[[6408]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/ripper/gcode_ripper.py: "tkinter.font" lines:[[[[6411]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "dbus.mainloop.pyqt5" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "sys" lines:[[255]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py: "PyQt5.QtCore" lines:[[256]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.qt_makegui" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp.lib.aux_program_loader" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: skipping "time" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "qtvcp" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/virtual_keyboard.py: "hal_glib" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/datetime.py: skipping "time" lines:[7] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/ext/table.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/writer/writer.py: "qtvcp.lib.writer.ext" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib" lines:[[[26]], [51]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.xobject" lines:[[[27]], [52]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py: "Xlib.protocol" lines:[[50]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "linuxcnc" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py: "qtvcp.lib.colored_formatter" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.action_button_round" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py: "qtvcp.widgets.richtext_selector" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.basic_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.camview_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.container_widgets" lines:[5, 6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.detach_tabs" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.dialog_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.gcode_graphics" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.hal_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.jog_increments" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.joypad" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.led_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.nurbs_editor" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.overlay_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.simplewidgets_plugin" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.led_plugin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.hal_label_plugin" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.detach_tabs_plugin" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_progress_bar_plugin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.joypad_plugin" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.nurbs_editor_plugin" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.web_widget_plugin" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.container_plugin" lines:[37, 38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.graphics_plugin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.widgets_plugin" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_led_plugin" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_label_plugin" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.state_label_plugin" lines:[43] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.actionbutton_plugin" lines:[44] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.dialog_plugin" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.overlay_plugin" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_slider_plugin" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.status_adjustment_bar_plugin" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.screenoptions_plugin" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.jogincrements_plugin" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.camview_plugin" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.toolbutton_plugin" lines:[52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.versa_probe_plugin" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.basic_probe_plugin" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.tab_widget_plugin" lines:[55] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.virtualkeyboard_plugin" lines:[56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.round_gauge_plugin" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py: "qtvcp.plugins.bar_plugin" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.round_gauge" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.round_progress" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.screen_options" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.simple_widgets" lines:[5, 6, 7, 8, 9, 10, 11, 12, 13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_output" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.general_hal_input" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.xembed" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.radio_axis_selector" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.axis_tool_button" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.offset_tool_button" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.file_manager" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.image_switcher" lines:[21, 22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.machine_log" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.state_label" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.state_led" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.adjustment_bar" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.richtext_selector" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.status_label" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.status_slider" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.tab_widget" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.system_tool_button" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.action_tool_button" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.versa_probe" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.virtualkeyboard" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.web_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.dro_widget" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_line" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_history" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.mdi_touchy" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.gcode_editor" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.geditor" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.status_stacked" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.widget_switcher" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.origin_offsetview" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.tool_offsetview" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.macro_widget" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py: "qtvcp.widgets.qtvcp_icons" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "time" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "linuxcnc" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "sys" lines:[1057] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: skipping "atexit" lines:[1058] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "subprocess" lines:[[[650], [666]], [[1067]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_action.py: "qtvcp.core" lines:[[1147]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_istat.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "importlib" lines:[[[[[190]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makegui.py: "resources" lines:[[[[[[191]]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.widgets.screen_options" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: skipping "sys" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "linuxcnc" lines:[1] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qtvcp_handler.py: "qtvcp" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "linuxcnc" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.widgets.simple_widgets" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp.lib.aux_program_loader" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "sys" lines:[[1580]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py: "PyQt5.QtWidgets" lines:[[1581]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "qtvcp.widgets.action_button" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "sys" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py: "PyQt5.QtWidgets" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "sys" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py: "PyQt5.QtWidgets" lines:[[83]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp.lib.aux_program_loader" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "sys" lines:[[390]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py: "PyQt5.QtWidgets" lines:[[391]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "hal" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "sys" lines:[[292]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py: "PyQt5.QtWidgets" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp.widgets.widget_baseclass" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "hal" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "qtvcp" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/bar.py: "PyQt5.QtCore" lines:[[7], [[10]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp.widgets.dialogMixin" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtWidgets" lines:[[459]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtCore" lines:[[460]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py: "PyQt5.QtGui" lines:[[461]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "qtvcp.core" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py: "sys" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: skipping "_thread" lines:[19] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.widgets.widget_baseclass" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "qtvcp.core" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "cv2" lines:[[45]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py: "sys" lines:[[504]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/detach_tabs.py: "sys" lines:[[359]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp.widgets.widget_baseclass" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialogMixin.py: "qtvcp" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.widget_baseclass" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.origin_offsetview" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.tool_offsetview" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.macro_widget" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.versa_probe" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.entry_widget" lines:[34] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.virtualkeyboard" lines:[35] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.calculator" lines:[36] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.machine_log" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.lib.notify" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.dialogMixin" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "qtvcp.widgets.camview_widget" lines:[[[984]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "sys" lines:[[1925]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py: "PyQt5.QtWidgets" lines:[[1926]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "linuxcnc" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "sys" lines:[[326]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py: "PyQt5.QtWidgets" lines:[[327]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "sys" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py: "PyQt5.QtWidgets" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: skipping "sys" lines:[3] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.widgets.widget_baseclass" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py: "sys" lines:[[556]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.widgets.widget_baseclass" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp.core" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "qtvcp" lines:[42] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.Qsci" lines:[[58]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtWidgets" lines:[[1137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtCore" lines:[[1138]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py: "PyQt5.QtGui" lines:[[1139]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "gcode" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "linuxcnc" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qt5_graphics" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.widgets.widget_baseclass" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp.core" lines:[32] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "qtvcp" lines:[33] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "sys" lines:[[511]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py: "PyQt5.QtWidgets" lines:[[512]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.gcode_editor" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.widgets.widget_baseclass" lines:[39] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp.core" lines:[40] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "qtvcp" lines:[41] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtWidgets" lines:[[523]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtCore" lines:[[524]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py: "PyQt5.QtGui" lines:[[525]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.widget_baseclass" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp.widgets.simple_widgets" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "sys" lines:[[216]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py: "PyQt5.QtWidgets" lines:[[217]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp.core" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "qtvcp" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "sys" lines:[[375]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py: "PyQt5.QtWidgets" lines:[[376]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py: "sys" lines:[[195]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "hal" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "qtvcp.widgets.widget_baseclass" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtCore" lines:[[22], [[25]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "sys" lines:[[655]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py: "PyQt5.QtWidgets" lines:[[656]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "sys" lines:[[242]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py: "PyQt5.QtWidgets" lines:[[243]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "sys" lines:[[133]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py: "PyQt5.QtWidgets" lines:[[134]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.entry_widget" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "qtvcp.widgets.touchEntry" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "PyQt5" lines:[[43]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py: "sys" lines:[[664]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.widgets.mdi_line" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtWidgets" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtCore" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "PyQt5.QtGui" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py: "sys" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "linuxcnc" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: skipping "time" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.core" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.widgets.entry_widget" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp.lib.aux_program_loader" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "sys" lines:[[330]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py: "PyQt5.QtWidgets" lines:[[331]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtWidgets" lines:[[393]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtCore" lines:[[394]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "PyQt5.QtGui" lines:[[395]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py: "sys" lines:[[396]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: skipping "sys" lines:[43] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "gcode" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qt5_graphics" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp.core" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py: "qtvcp" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "sys" lines:[[202]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py: "PyQt5.QtWidgets" lines:[[203]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py: "PyQt5.QtWidgets" lines:[[516]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "sys" lines:[[387]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtWidgets" lines:[[388]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py: "PyQt5.QtCore" lines:[[389]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "sys" lines:[5] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: skipping "time" lines:[6] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "linuxcnc" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp.core" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py: "qtvcp" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: skipping "time" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py: "qtvcp.widgets.probe_routines" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.widgets.widget_baseclass" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "qtvcp" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "sys" lines:[[64]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py: "PyQt5.QtWidgets" lines:[[65]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py: skipping "sys" lines:[10] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "qtvcp.widgets.widget_baseclass" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "sys" lines:[[318]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py: "PyQt5.QtWidgets" lines:[[319]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "sys" lines:[[293]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_progress.py: "PyQt5.QtWidgets" lines:[[294]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtWidgets" lines:[[80]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtCore" lines:[[81]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py: "PyQt5.QtGui" lines:[[82]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "linuxcnc" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.xembed" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.message" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.notify" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.audio_player" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.preferences" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.lib.machine_log" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "zmq" lines:[[[61]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "json" lines:[[[67]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.core" lines:[[[[[403]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.dialog_widget" lines:[[[511], [526], [536], [544], [552], [561], [580], [588], [597], [605], [613], [621], [630], [638], [646]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py: "qtvcp.widgets.overlay_widget" lines:[[[569]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.widgets.widget_baseclass" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.lib.aux_program_loader" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp.core" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "hal" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py: "qtvcp" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.simple_widgets" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp.core" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "qtvcp" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py: "sys" lines:[[180]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.widgets.led_widget" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "sys" lines:[[558]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py: "PyQt5.QtGui" lines:[[559]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: skipping "time" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.simple_widgets" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.widgets.widget_baseclass" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "qtvcp.core" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtWidgets" lines:[[785]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtCore" lines:[[786]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "PyQt5.QtGui" lines:[[787]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py: "sys" lines:[[789]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "hal" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.widgets.widget_baseclass" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.widgets.widget_baseclass" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp.core" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.core" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp.qt_makegui" lines:[50] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py: "qtvcp" lines:[51] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.widget_baseclass" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.widgets.dialog_widget" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp.core" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "qtvcp" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "sys" lines:[[123]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py: "PyQt5.QtWidgets" lines:[[124]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.widgets.widget_baseclass" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp.core" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "qtvcp" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py: "PyQt5.QtWidgets" lines:[[587]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtWidgets" lines:[[268]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtCore" lines:[[269]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "PyQt5.QtGui" lines:[[270]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/touchEntry.py: "sys" lines:[[271]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "hal" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.widget_baseclass" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.core" lines:[28] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp.widgets.dialogMixin" lines:[29] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "qtvcp" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtWidgets" lines:[[593]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtCore" lines:[[594]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py: "PyQt5.QtGui" lines:[[595]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp.core" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtWidgets" lines:[[181]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtCore" lines:[[182]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py: "PyQt5.QtGui" lines:[[183]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebEngineWidgets" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/web_widget.py: "PyQt5.QtWebKitWidgets" lines:[[[[17]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "hal" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp.widgets.widget_baseclass" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py: "qtvcp" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: skipping "time" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.widgets.widget_baseclass" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "qtvcp.lib" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py: "PyQt5.QtWidgets" lines:[[137]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "_togl" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "glnav" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: skipping "itertools" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py: "tkinter.dialog" lines:[[[209]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/__init__.py: "rs274.interpret" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/author.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "rs274" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "itertools" lines:[21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "glnav" lines:[23] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "hershey" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "linuxcnc" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: "gcode" lines:[27] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/glcanon.py: skipping "sys" lines:[30] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/interpret.py: "gcode" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: "nf" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py: skipping "sys" lines:[167] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: skipping "time" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py: "configparser" lines:[[[830]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "time" lines:[26] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py: skipping "sys" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: skipping "sys" lines:[34] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py: "stepconf" lines:[[[[221]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/tooldb.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/emc_interface.py: skipping "__main__" lines:[15] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/hal_interface.py: "hal" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/touchy/preferences.py: skipping "sys" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "sys" lines:[23] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "linuxcnc" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "pyvcp_widgets" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: "hal" lines:[26] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vcpparse.py: skipping "time" lines:[27] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: skipping "sys" lines:[18] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "rs274.OpenGLTk" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "hal" lines:[18, 25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/vismach.py: "glnav" lines:[24] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest-gui.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/filtertest.py: skipping "sys" lines:[2] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: skipping "sys" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "tkinter" lines:[[10]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "pickle" lines:[[11]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "nf" lines:[[12]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "rs274.options" lines:[[13]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/holecircle.py: "os" lines:[[14]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/remap.py: "stdglue" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/toplevel.py: "remap" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/cam_align/cam_align_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/copy/copy_handler.py: "qtvcp.widgets.file_manager" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: skipping "sys" lines:[24] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "hal" lines:[25] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.core" lines:[30] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/qtplasmac_sim/qtplasmac_sim_handler.py: "qtvcp.lib.preferences" lines:[31] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/sim_panel/sim_panel_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py: "qtvcp" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.widgets.simple_widgets" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_button/test_button_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.simple_widgets" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_dial/test_dial_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.hal_selectionbox" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.widgets.led_widget" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_led/test_led_handler.py: "qtvcp.lib.aux_program_loader" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_panel/test_panel_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp.core" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/test_probe/test_probe_handler.py: "qtvcp" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.core" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/tool_dialog/tool_dialog_handler.py: "qtvcp.widgets.dialog_widget" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp.core" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/versaprobe/versaprobe_handler.py: "qtvcp" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_5axis_gantry/vismach_5axis_gantry_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_fanuc_200f/vismach_fanuc_200f_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_mill_xyz/vismach_mill_xyz_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_millturn/vismach_millturn_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.core" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_router_atc/vismach_router_atc_handler.py: "qtvcp.lib.qt_vismach.qt_vismach" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.core" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/vismach_scara/vismach_scara_handler.py: "qtvcp.lib.qt_vismach" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.dialog_widget" lines:[11, 12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/blender/blender_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.widgets.nurbs_editor" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.lib.toolbar_actions" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp.core" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc/qt_cnc_handler.py: "qtvcp" lines:[20] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.keybindings" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.aux_program_loader" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.notify" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.dialog_widget" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.lib.preferences" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.widgets.overlay_widget" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: "linuxcnc" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_800x600/qt_cnc_800x600_handler.py: skipping "sys" lines:[17] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.tool_offsetview" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.dialog_widget" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.mdi_line" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.widgets.gcode_editor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.lib.notify" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qt_cnc_9_axis/qt_cnc_9_axis_handler.py: "qtvcp" lines:[21] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.geditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.status_label" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.state_led" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.widgets.bar" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.writer" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.keybindings" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcodes" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[13] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[29]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[279]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[290]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[284]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[441]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[446]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "time" lines:[1] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.gcode_editor" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.mdi_line" lines:[4] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.tool_offsetview" lines:[5] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.origin_offsetview" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.file_manager" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.auto_height.auto_height" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.writer" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcodes" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[14] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.aux_program_loader" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.core" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "PyQt5.QtWebEngineWidgets" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[438]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[443]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[454]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[458]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py: "qtvcp.lib.gcode_utility.hole_enlarge" lines:[[[[463]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "hal" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.mdi_line" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.gcode_editor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.file_manager" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.keybindings" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.toolbar_actions" lines:[16] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.lib.gcodes" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp.core" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtlathe/qtlathe_handler.py: "qtvcp" lines:[22] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.action_button" lines:[5666] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.axis_tool_button" lines:[5667] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.camview_widget" lines:[5668] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.dro_widget" lines:[5669] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.file_manager" lines:[5670] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_editor" lines:[5671] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.gcode_graphics" lines:[5672] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.hal_label" lines:[5673] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.jog_increments" lines:[5674] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.led_widget" lines:[5675] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.machine_log" lines:[5676] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.mdi_history" lines:[5677] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.screen_options" lines:[5678] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.simple_widgets" lines:[5679] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_label" lines:[5680] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.status_slider" lines:[5681] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/languages/qtplasmac.py: "qtvcp.widgets.system_tool_button" lines:[5682] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qttouchy/qttouchy_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.lib.keybindings" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp.core" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/tester/tester_handler.py: "qtvcp" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "linuxcnc" lines:[2] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "hal" lines:[3] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.gcode_editor" lines:[7] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.mdi_line" lines:[8] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.tool_offsetview" lines:[9] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.origin_offsetview" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.file_manager" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.writer" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.keybindings" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcodes" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: skipping "qtvcp.lib.qt_pdf" lines:[16] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.simple_widgets" lines:[17] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.core" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp" lines:[19] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.facing" lines:[[[229]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.gcode_utility.hole_circle" lines:[[[233]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.lib.qt_ngcgui.ngcgui" lines:[[[239]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.versa_probe" lines:[[[[422]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/woodpecker/woodpecker_handler.py: "qtvcp.widgets.basic_probe" lines:[[[[[427]]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: skipping "sys" lines:[4] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "linuxcnc" lines:[6] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.mdi_line" lines:[10] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.gcode_editor" lines:[11] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.keybindings" lines:[12] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.lib.toolbar_actions" lines:[13] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[14] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp.core" lines:[15] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/x1mill/x1mill_handler.py: "qtvcp" lines:[18] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "emccanon" lines:[19, 21] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: skipping "interpreter" lines:[20] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/linuxcnc/ncfiles/remap_lib/python-stdglue/python/stdglue.py: "hal" lines:[[33]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "sys" lines:[25] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "time" lines:[32] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "linuxcnc" lines:[37] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "hal" lines:[38] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp" lines:[45] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.core" lines:[46] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.gcodes" lines:[47] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.keybindings" lines:[48] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.preferences" lines:[49] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[50, 51, 52] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.camview_widget" lines:[53] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.file_manager" lines:[54] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.gcode_editor" lines:[55, 56] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_history" lines:[57] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.mdi_line" lines:[58] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.origin_offsetview" lines:[59, 60] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.screen_options" lines:[61] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.simple_widgets" lines:[62] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.status_label" lines:[63] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.widgets.stylesheeteditor" lines:[64] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.aux_program_loader" lines:[65] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: skipping "plasmac" lines:[66] py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "rs274.glcanon" lines:[67] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qt5_graphics" lines:[68] is possibly a self-providing dependency, skip it py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "qtvcp.lib.qtplasmac" lines:[[108]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial" lines:[[[[5313]]]]: Ignore for REQ:slight py3req:/usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/screens/qtplasmac_9x16/qtplasmac_9x16_handler.py: "serial.tools.list_ports" lines:[[[[5314]]]]: Ignore for REQ:slight shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/calculatorwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/combi_dro.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/drowidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/gladebuilder.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_dial.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_filechooser.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_gremlin_plus.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_mdihistory.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/hal_sourceview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/iconview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/jogwheel.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetpage_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/offsetwidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/overridewidget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/persistence.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/speedcontrol.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/tooledit_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gladevcp/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/dialogs.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/getiniinfo.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/icon_theme_helper.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/notification.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gmoccapy/widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/gremlin_view.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/hal_glib.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/private_data.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pncconf/tests.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/popupkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/pyui/master.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qt5_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/core.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/audio_player.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/auto_height/auto_height.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/facing.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_circle.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/gcode_utility/hole_enlarge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_ngcgui/ngcgui.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/qt_vismach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/qt_vismach/scara.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/sys_notify.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/toolbar_actions.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/touchoff_subprogram.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/lib/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/logger.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/actionbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/basic_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/camview_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/container_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/detach_tabs_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/dialog_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/graphics_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/hal_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/jogincrements_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/joypad_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/nurbs_editor_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/overlay_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/qtvcp_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_gauge_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/round_progress_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/screenoptions_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/simplewidgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/state_led_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_adjustment_bar_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_label_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/status_slider_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/tab_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/toolbutton_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/versa_probe_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/virtualkeyboard_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/web_widget_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/plugins/widgets_plugin.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_makepins.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_pstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/qt_tstat.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_button_round.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/action_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/adjustment_bar.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/axis_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/basic_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/calculator.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/camview_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/container_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dialog_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/dro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/entry_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/fake_status.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/file_manager.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/gcode_graphics.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/geditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_input.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/general_hal_output.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/hal_selectionbox.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/image_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/jog_increments.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/joypad.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/led_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/machine_log.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/macro_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_history.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_line.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/mdi_touchy.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/nurbs_editor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/offset_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/origin_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/overlay_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_routines.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/probe_subprog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/qtvcp_icons.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/radio_axis_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/richtext_selector.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/round_gauge.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/runFromLine_dialog.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/screen_options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/simple_widgets.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/state_led.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_label.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_slider.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/status_stacked.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/stylesheeteditor.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/system_tool_button.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tab_widget.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/tool_offsetview.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/versa_probe.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/virtualkeyboard.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_baseclass.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/widget_switcher.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/qtvcp/widgets/xembed.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/OpenGLTk.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/rs274/options.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_HAL.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/build_INI.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/import_mach.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/lib/python3/site-packages/stepconf/pages.py is not executable shebang.req.files: executable script /usr/src/tmp/linuxcnc-buildroot/usr/share/qtvcp/panels/spindle_belts/spindle_belts_handler.py is not executable /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: line 30: `source [file join $::env(HALLIB_DIR) hal_procs_lib.tcl]' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emccalib.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: line 29: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emcdebug.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: line 27: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctesting.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: line 28: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/emctuning.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl: line 49: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/genedit.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: line 43: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halconfig.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: line 30: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/halshow.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl: line 102: ` } else {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/pickconfig.tcl is wish script! /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: line 31: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage is ${LINUXCNC_EMCSH-wish} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/popimage: invalid command: ${LINUXCNC_EMCSH-wish} /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: line 108: ` }' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/bin/tkbackplot.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: syntax error near unexpected token `}' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: line 32: `}' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl is $LINUXCNC_EMCSH script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/scripts/Set_Coordinates.tcl: invalid command: $LINUXCNC_EMCSH /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: syntax error near unexpected token `(' /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: line 60: `if ([info exists env(LANG)]) {' shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl is ${LINUXCNC_EMCSH-emcsh} script! shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/lib/tcl/linuxcnc/tklinuxcnc.tcl: invalid command: ${LINUXCNC_EMCSH-emcsh} shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: invalid command: -v shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc: /usr/scripts/rip-environment -> /usr/scripts/rip-environment (raw, not installed) shell.req: /usr/src/tmp/linuxcnc-buildroot/usr/bin/linuxcnc_info: invalid command: -v ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' --- find-requires-deps 2023-10-14 07:37:28.953273501 +0000 +++ filter-requires-deps 2023-10-14 07:37:28.955273522 +0000 @@ -24,3 +24,3 @@ /usr/lib/python3/site-packages -/usr/scripts/rip-environment + coreutils @@ -183,3 +183,3 @@ tk -typelib(Cairo) + typelib(GLib) find-requires: FINDPACKAGE-COMMANDS: awk basename cat clear cp cut date dirname gcc git grep head ipcrm ln lsb_release mkdir mktemp ps pylupdate5 python3 readlink rm sleep sudo tclsh touch tty uname uptime wc wish xdpyinfo Provides: python3(_hal), python3(_togl), python3(bitfile), python3(bwidget), python3(filtertest) = set:edp3, python3(flowsnake) = set:edp3, python3(gcode), python3(gladevcp), python3(gladevcp.calculatorwidget), python3(gladevcp.combi_dro), python3(gladevcp.core), python3(gladevcp.drowidget), python3(gladevcp.gladebuilder), python3(gladevcp.gtk_action), python3(gladevcp.hal_actions), python3(gladevcp.hal_bar), python3(gladevcp.hal_dial), python3(gladevcp.hal_filechooser), python3(gladevcp.hal_graph), python3(gladevcp.hal_gremlin), python3(gladevcp.hal_gremlin_plus), python3(gladevcp.hal_lightbutton), python3(gladevcp.hal_mdihistory), python3(gladevcp.hal_meter), python3(gladevcp.hal_pyngcgui), python3(gladevcp.hal_pythonplugin), python3(gladevcp.hal_sourceview), python3(gladevcp.hal_widgets), python3(gladevcp.iconview), python3(gladevcp.jogwheel), python3(gladevcp.led), python3(gladevcp.macro_widget), python3(gladevcp.makepins), python3(gladevcp.offsetpage_widget), python3(gladevcp.offsetwidget), python3(gladevcp.overridewidget), python3(gladevcp.persistence), python3(gladevcp.speedcontrol), python3(gladevcp.state_label), python3(gladevcp.status_label), python3(gladevcp.tooledit_widget), python3(gladevcp.xembed), python3(gladevcp_makepins), python3(glnav), python3(gmoccapy), python3(gmoccapy.dialogs), python3(gmoccapy.getiniinfo), python3(gmoccapy.icon_theme_helper), python3(gmoccapy.notification), python3(gmoccapy.player), python3(gmoccapy.preferences), python3(gmoccapy.widgets), python3(gremlin), python3(gremlin_view), python3(gscreen), python3(gscreen.emc_interface), python3(gscreen.keybindings), python3(gscreen.mdi), python3(gscreen.preferences), python3(hal), python3(hal_glib), python3(hershey), python3(holecircle) = set:edp3, python3(involute) = set:edp3, python3(lineardeltakins), python3(linux_event), python3(linuxcnc), python3(linuxcnc_util), python3(multifilebuilder), python3(nf), python3(panels.cam_align.cam_align_handler) = set:ed3l, python3(panels.copy.copy_handler) = set:ed3l, python3(panels.qtplasmac_sim.qtplasmac_sim_handler) = set:ed3l, python3(panels.sim_panel.sim_panel_handler) = set:ed3l, python3(panels.spindle_belts.spindle_belts_handler) = set:ed3l, python3(panels.test_button.test_button_handler) = set:ed3l, python3(panels.test_dial.test_dial_handler) = set:ed3l, python3(panels.test_led.test_led_handler) = set:ed3l, python3(panels.test_panel.test_panel_handler) = set:ed3l, python3(panels.test_probe.test_probe_handler) = set:ed3l, python3(panels.tool_dialog.tool_dialog_handler) = set:ed3l, python3(panels.versaprobe.versaprobe_handler) = set:ed3l, python3(panels.vismach_5axis_gantry.vismach_5axis_gantry_handler) = set:ed3l, python3(panels.vismach_fanuc_200f.vismach_fanuc_200f_handler) = set:ed3l, python3(panels.vismach_mill_xyz.vismach_mill_xyz_handler) = set:ed3l, python3(panels.vismach_millturn.vismach_millturn_handler) = set:ed3l, python3(panels.vismach_router_atc.vismach_router_atc_handler) = set:ed3l, python3(panels.vismach_scara.vismach_scara_handler) = set:ed3l, python3(plasmac.block), python3(plasmac.bolt_circle), python3(plasmac.circle), python3(plasmac.ellipse), python3(plasmac.gusset), python3(plasmac.line), python3(plasmac.polygon), python3(plasmac.rectangle), python3(plasmac.run_from_line), python3(plasmac.sector), python3(plasmac.slot), python3(plasmac.star), python3(plasmac.triangle), python3(pncconf), python3(pncconf.build_HAL), python3(pncconf.build_INI), python3(pncconf.data), python3(pncconf.pages), python3(pncconf.private_data), python3(pncconf.tests), python3(popupkeyboard), python3(propertywindow), python3(pyhal), python3(pyngcgui), python3(pyui), python3(pyui.commands), python3(pyui.master), python3(pyui.panelui_validate), python3(pyui.widgets), python3(pyvcp_widgets), python3(qt5_graphics), python3(qtvcp), python3(qtvcp.core), python3(qtvcp.lib), python3(qtvcp.lib.audio_player), python3(qtvcp.lib.auto_height.auto_height), python3(qtvcp.lib.aux_program_loader), python3(qtvcp.lib.colored_formatter), python3(qtvcp.lib.gcode_utility), python3(qtvcp.lib.gcode_utility.facing), python3(qtvcp.lib.gcode_utility.hole_circle), python3(qtvcp.lib.gcode_utility.hole_enlarge), python3(qtvcp.lib.gcodes), python3(qtvcp.lib.keybindings), python3(qtvcp.lib.machine_log), python3(qtvcp.lib.mdi_text), python3(qtvcp.lib.message), python3(qtvcp.lib.notify), python3(qtvcp.lib.preferences), python3(qtvcp.lib.qt_ngcgui.ngcgui), python3(qtvcp.lib.qt_pdf.PDFViewer), python3(qtvcp.lib.qt_vismach), python3(qtvcp.lib.qt_vismach.fanuc_200f), python3(qtvcp.lib.qt_vismach.gantry_5axis), python3(qtvcp.lib.qt_vismach.mill_xyz), python3(qtvcp.lib.qt_vismach.millturn), python3(qtvcp.lib.qt_vismach.primitives), python3(qtvcp.lib.qt_vismach.qt_vismach), python3(qtvcp.lib.qt_vismach.scara), python3(qtvcp.lib.qtplasmac), python3(qtvcp.lib.qtplasmac.conv_block), python3(qtvcp.lib.qtplasmac.conv_bolt), python3(qtvcp.lib.qtplasmac.conv_circle), python3(qtvcp.lib.qtplasmac.conv_ellipse), python3(qtvcp.lib.qtplasmac.conv_gusset), python3(qtvcp.lib.qtplasmac.conv_line), python3(qtvcp.lib.qtplasmac.conv_polygon), python3(qtvcp.lib.qtplasmac.conv_rectangle), python3(qtvcp.lib.qtplasmac.conv_sector), python3(qtvcp.lib.qtplasmac.conv_settings), python3(qtvcp.lib.qtplasmac.conv_slot), python3(qtvcp.lib.qtplasmac.conv_star), python3(qtvcp.lib.qtplasmac.conv_triangle), python3(qtvcp.lib.qtplasmac.conversational), python3(qtvcp.lib.qtplasmac.set_offsets), python3(qtvcp.lib.qtplasmac.tooltips), python3(qtvcp.lib.qtplasmac.updater), python3(qtvcp.lib.ripper.gcode_ripper), python3(qtvcp.lib.sys_notify), python3(qtvcp.lib.toolbar_actions), python3(qtvcp.lib.touchoff_subprogram), python3(qtvcp.lib.virtual_keyboard), python3(qtvcp.lib.writer), python3(qtvcp.lib.writer.ext), python3(qtvcp.lib.writer.ext.datetime), python3(qtvcp.lib.writer.ext.find), python3(qtvcp.lib.writer.ext.table), python3(qtvcp.lib.writer.ext.wordcount), python3(qtvcp.lib.writer.writer), python3(qtvcp.lib.xembed), python3(qtvcp.logger), python3(qtvcp.plugins), python3(qtvcp.plugins.actionbutton_plugin), python3(qtvcp.plugins.bar_plugin), python3(qtvcp.plugins.basic_probe_plugin), python3(qtvcp.plugins.camview_plugin), python3(qtvcp.plugins.container_plugin), python3(qtvcp.plugins.detach_tabs_plugin), python3(qtvcp.plugins.dialog_plugin), python3(qtvcp.plugins.graphics_plugin), python3(qtvcp.plugins.hal_label_plugin), python3(qtvcp.plugins.jogincrements_plugin), python3(qtvcp.plugins.joypad_plugin), python3(qtvcp.plugins.led_plugin), python3(qtvcp.plugins.nurbs_editor_plugin), python3(qtvcp.plugins.overlay_plugin), python3(qtvcp.plugins.qtvcp_plugin), python3(qtvcp.plugins.round_gauge_plugin), python3(qtvcp.plugins.round_progress_bar_plugin), python3(qtvcp.plugins.screenoptions_plugin), python3(qtvcp.plugins.simplewidgets_plugin), python3(qtvcp.plugins.state_label_plugin), python3(qtvcp.plugins.state_led_plugin), python3(qtvcp.plugins.status_adjustment_bar_plugin), python3(qtvcp.plugins.status_label_plugin), python3(qtvcp.plugins.status_slider_plugin), python3(qtvcp.plugins.tab_widget_plugin), python3(qtvcp.plugins.toolbutton_plugin), python3(qtvcp.plugins.versa_probe_plugin), python3(qtvcp.plugins.virtualkeyboard_plugin), python3(qtvcp.plugins.web_widget_plugin), python3(qtvcp.plugins.widgets_plugin), python3(qtvcp.qt_action), python3(qtvcp.qt_istat), python3(qtvcp.qt_makegui), python3(qtvcp.qt_makepins), python3(qtvcp.qt_pstat), python3(qtvcp.qt_tstat), python3(qtvcp.qtvcp_handler), python3(qtvcp.widgets), python3(qtvcp.widgets.action_button), python3(qtvcp.widgets.action_button_round), python3(qtvcp.widgets.action_tool_button), python3(qtvcp.widgets.adjustment_bar), python3(qtvcp.widgets.axis_tool_button), python3(qtvcp.widgets.bar), python3(qtvcp.widgets.basic_probe), python3(qtvcp.widgets.calculator), python3(qtvcp.widgets.camview_widget), python3(qtvcp.widgets.container_widgets), python3(qtvcp.widgets.detach_tabs), python3(qtvcp.widgets.dialogMixin), python3(qtvcp.widgets.dialog_widget), python3(qtvcp.widgets.dro_widget), python3(qtvcp.widgets.entry_widget), python3(qtvcp.widgets.fake_status), python3(qtvcp.widgets.file_manager), python3(qtvcp.widgets.gcode_editor), python3(qtvcp.widgets.gcode_graphics), python3(qtvcp.widgets.geditor), python3(qtvcp.widgets.general_hal_input), python3(qtvcp.widgets.general_hal_output), python3(qtvcp.widgets.hal_label), python3(qtvcp.widgets.hal_selectionbox), python3(qtvcp.widgets.image_switcher), python3(qtvcp.widgets.jog_increments), python3(qtvcp.widgets.joypad), python3(qtvcp.widgets.led_widget), python3(qtvcp.widgets.machine_log), python3(qtvcp.widgets.macro_widget), python3(qtvcp.widgets.mdi_history), python3(qtvcp.widgets.mdi_line), python3(qtvcp.widgets.mdi_touchy), python3(qtvcp.widgets.nurbs_editor), python3(qtvcp.widgets.offset_tool_button), python3(qtvcp.widgets.origin_offsetview), python3(qtvcp.widgets.overlay_widget), python3(qtvcp.widgets.probe_routines), python3(qtvcp.widgets.probe_subprog), python3(qtvcp.widgets.qtvcp_icons), python3(qtvcp.widgets.radio_axis_selector), python3(qtvcp.widgets.richtext_selector), python3(qtvcp.widgets.round_gauge), python3(qtvcp.widgets.round_progress), python3(qtvcp.widgets.runFromLine_dialog), python3(qtvcp.widgets.screen_options), python3(qtvcp.widgets.simple_widgets), python3(qtvcp.widgets.state_label), python3(qtvcp.widgets.state_led), python3(qtvcp.widgets.status_label), python3(qtvcp.widgets.status_slider), python3(qtvcp.widgets.status_stacked), python3(qtvcp.widgets.stylesheeteditor), python3(qtvcp.widgets.system_tool_button), python3(qtvcp.widgets.tab_widget), python3(qtvcp.widgets.tool_offsetview), python3(qtvcp.widgets.touchEntry), python3(qtvcp.widgets.versa_probe), python3(qtvcp.widgets.virtualkeyboard), python3(qtvcp.widgets.web_widget), python3(qtvcp.widgets.widget_baseclass), python3(qtvcp.widgets.widget_switcher), python3(qtvcp.widgets.xembed), python3(rotarydeltakins), python3(rs274), python3(rs274.OpenGLTk), python3(rs274.author), python3(rs274.glcanon), python3(rs274.interpret), python3(rs274.options), python3(screens.blender.blender_handler) = set:ed3l, python3(screens.qt_cnc.qt_cnc_handler) = set:ed3l, python3(screens.qt_cnc_800x600.qt_cnc_800x600_handler) = set:ed3l, python3(screens.qt_cnc_9_axis.qt_cnc_9_axis_handler) = set:ed3l, python3(screens.qtaxis.qtaxis_handler) = set:ed3l, python3(screens.qtdragon.qtdragon_handler) = set:ed3l, python3(screens.qtdragon_hd.qtdragon_hd_handler) = set:ed3l, python3(screens.qtlathe.qtlathe_handler) = set:ed3l, python3(screens.qtplasmac.languages.qtplasmac) = set:ed3l, python3(screens.qtplasmac.qtplasmac_handler) = set:ed3l, python3(screens.qtplasmac_4x3.qtplasmac_4x3_handler) = set:ed3l, python3(screens.qtplasmac_9x16.qtplasmac_9x16_handler) = set:ed3l, python3(screens.qttouchy.qttouchy_handler) = set:ed3l, python3(screens.tester.tester_handler) = set:ed3l, python3(screens.woodpecker.woodpecker_handler) = set:ed3l, python3(screens.x1mill.x1mill_handler) = set:ed3l, python3(stepconf), python3(stepconf.build_HAL), python3(stepconf.build_INI), python3(stepconf.import_mach), python3(stepconf.pages), python3(tooldb), python3(touchy), python3(touchy.emc_interface), python3(touchy.filechooser), python3(touchy.hal_interface), python3(touchy.listing), python3(touchy.mdi), python3(touchy.preferences), python3(vcpparse), python3(vismach), tcl(Hal), tcl(Hal)-1 = 1.0, tcl(Linuxcnc), tcl(Linuxcnc)-1 = 1.0, tcl(Ngcgui), tcl(Ngcgui)-1 = 1.0, tcl(Ngcguittt), tcl(Ngcguittt)-1 = 1.0 Requires: liblinuxcnc = 2.9.1-alt1.20231009, python3-module-PyQt5-devel, libgtksourceview3-gir, libX11-devel, tclx, tcl-blt, python3(Xlib) < 0, python3(PyQt5.Qsci) < 0, /bin/bash, /bin/sh, /lib/ld-linux.so.2, /lib/udev/rules.d, /usr/bin/env, /usr/bin/python3, /usr/bin/python3.11, /usr/bin/tclsh, /usr/bin/tclsh8.6, /usr/bin/wish, /usr/bin/wish8.6, /usr/lib/python3/site-packages, coreutils, gawk, gcc-common, git-core, grep, libX11.so.6 >= set:oja5r3qabUpLHlTcdkK7Ymnta6aWUK6qURI2aereyuySbaY9Y9rRf80, libXinerama.so.1 >= set:hfyH4K6, libXmu.so.6 >= set:lktel, libboost_python311.so.1.83.0 >= set:mgHjLOu02TV5bU7yZbfxdpGzpWBQZbH5ZBNBA8RqMbIk1pVeOksff5zPTgR6BlMe3bsaSqvHwTWOl8HKruuyygMXaeZwR1wK7w8Ue3Z3oIUAffMmvh8Yv3pmFg6uLAhAUuYogi8iOnTr5zCidMQ0, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.2.3), libc.so.6(GLIBC_2.27), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.7), libc.so.6(GLIBC_2.8), libcairo.so.2 >= set:miBeiC9UuDqAUQ1bepgkhH08f6m87ljhFbj6, libepoxy.so.0 >= set:plG6OtaOh21hPpoEbYgihHZ0wsB7PrHp7He0, libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgdk-3.so.0 >= set:nkZ5ndiwLew01gu7UA, libgdk-x11-2.0.so.0 >= set:njH9A3kDQ0iQRBflIP1zlE5TpwDZsPmjGbQ, libglib-2.0.so.0 >= set:olyg8bKheHPr7MU1, libgobject-2.0.so.0 >= set:mjQCdZlc930HMK1, libgtk-3.so.0 >= set:qjjZoCF3lFXh6tMGe5LNfHjmYeZBthRtN41TeIZzjgwWOrHiSh2NZBTl9RaGCZcaZtsSDoklAfoY3jZqdwNTjVxluts4fzptNZoObnMXHUBHYRt39LkeFCpeX0XGSNmA8AjwtwC5hgzieP0K2oI8aJb3kDhZ4iVp7IxwWvgRbyDTqaJhAOTD2Fv8g9yPZ6NOuGRIGtqP9FiPwZfRTshMUVUTNtViaQgX5ndOGrJMiFzxXDm6AW3HZBRN91ZxbqL4uj5Pt3embDjf1R8JsH7xQTCBVCxMfYTOJIZFI9ZbiGb6GLX0FyKvWxZH06khJ56lr41PV7VxkpV7CX5AN30dAgkjASU69WAU20ZKQEW5CdLKnYV6PQaWR9Q2d4, libgtk-x11-2.0.so.0 >= set:pijZofB1Sac1HWm6UJI4cT7ZgTZ5cu7LyBFNQFMTkKvPsM6syJWtgE6gCt8VZC2002Yr6O3qpMKORxMYFpGbygZwTFmPjEBmkFK5tZ9puR8V4nvNqcMb9Q8ET5Z5nwuEj7uZbKfI69aHIIc6AKSdSXr1KNVy75UzoI60weGwIZrr62BMCZ1BOfXpj2M6ZjtlXi25ghyZccTXY7GXsFuvoeSJ3yKQFbX9A7iCzUEYa6aZ04fAonLTJJ2yQZ7HcxVrWamaKGUdBx8Y99PalB5dPYDzTFF762xI20, liblinuxcnchal.so.0 >= set:kdPx99okMC0Dz1625MawlIfquO3JZ3ZIUi5Jl7M43uZ4jrJfiRqxZ2hezaWOwqo8jNxXb4PXA5GbMGAP8gNN7e5Z7F9EPZhr3lvZ8aQw6VY2Cu2agoAmBmnw7UQIPmWiMLuqjUJnhudWalGzhjgU7, liblinuxcncini.so.0 >= set:jf3pACnRkFYa1jK9dmLdZcAMQZdkP4S54W3, libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libmodbus.so.5 >= set:kf4sxmJBcjkoYXJ6nZ8w1f3UAmWo529bNQO9HdZ6GfYWQgMVJKZenaurI1UX4, libnml.so.0 >= set:nhHZFI3kBS0Ma7l8Tbc7NDAj0cVe7YpJAecK8HiAlVmUFIacmYZAgNKb7AgZ9o3YcwI77x8lKghWwBp3R3aHXufreVgSJOcHDIMmg3FTiWGgZDSqajrVXGCmzmwK9kEnrrZAXgB, libpango-1.0.so.0 >= set:miqUTrpg55DU675j31iPjU59gVL2, libpangocairo-1.0.so.0 >= set:jiZ1Z0, libposemath.so.0 >= set:mhNqbLmit1h1SKAkf3R8yKzITkH51qlNb2mXMvLIbzYdLSZ1Pn3dvFo360T4Ym3VUZ06J9T65VCYVK5, libpyplugin.so.0 >= set:ifB9gZhMHZs51, libpython3.11.so.1.0 >= set:oipCiruqzTeZzb6nQEDgYmcycRwVJdbZ5iXKYZiJODaguD1Z09heVWM4C62R9XS3UbkznKwtFB0v3EX8wxJskhoMjZnQOps91h0gXMB2zZ0ZiESnuTSI6RauE3xO1AePZyWlNaBQhCb27NyC2QiQiNF0zEU1FA9BQnlAid, libreadline.so.8 >= set:njCJKlFcmgU8mvL3SqZmyq3ZFmIppb, librs274.so.0 >= set:oklu8nstiJF4gERvmYKLZu2B25LRi2g8GwakLmkAhIVMce, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.14), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.20), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtk8.6.so >= set:mh48jtZxaNUhMsSfBJ4AXC6RIwDmyqFM8nd9l1ee9PQ0ud0, libtooldata.so.0 >= set:ieCH2SkPFzG4BeSHWNfZwfGC1oYUwSluc7, libudev.so.1 >= set:kgKhqJ5KQ3IrBeCbBEkBBomRh1RpLFAx211, libudev.so.1(LIBUDEV_183), libusb-1.0.so.0 >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu, lsb-release, procps, python3, python3(OpenGL) < 0, python3(OpenGL.GL) < 0, python3(OpenGL.GLU) < 0, python3(OpenGL.raw.GLX._types) < 0, python3(PyQt5) < 0, python3(PyQt5.QtCore) < 0, python3(PyQt5.QtDesigner) < 0, python3(PyQt5.QtGui) < 0, python3(PyQt5.QtPrintSupport) < 0, python3(PyQt5.QtWidgets) < 0, python3(__future__) < 0, python3(array) < 0, python3(binascii) < 0, python3(cairo) < 0, python3(collections) < 0, python3(configobj) < 0, python3(configparser) < 0, python3(copy) < 0, python3(ctypes) < 0, python3(datetime) < 0, python3(dbus) < 0, python3(decimal) < 0, python3(distutils.spawn) < 0, python3(enum) < 0, python3(fcntl) < 0, python3(fnmatch) < 0, python3(functools) < 0, python3(getopt) < 0, python3(gettext) < 0, python3(gi) < 0, python3(gi.repository) < 0, python3(glib) < 0, python3(glob) < 0, python3(hashlib) < 0, python3(importlib) < 0, python3(inspect) < 0, python3(json) < 0, python3(locale) < 0, python3(logging) < 0, python3(math) < 0, python3(mimetypes) < 0, python3(numpy) < 0, python3(numpy.core) < 0, python3(operator) < 0, python3(optparse) < 0, python3(os) < 0, python3(pickle) < 0, python3(random) < 0, python3(re) < 0, python3(readline) < 0, python3(select) < 0, python3(serial) < 0, python3(shutil) < 0, python3(signal) < 0, python3(socket) < 0, python3(string) < 0, python3(struct) < 0, python3(subprocess) < 0, python3(tarfile) < 0, python3(tempfile) < 0, python3(textwrap) < 0, python3(threading) < 0, python3(tkinter) < 0, python3(traceback) < 0, python3(types) < 0, python3(uuid) < 0, python3(validate) < 0, python3(warnings) < 0, python3(webbrowser) < 0, python3(xml.dom.minidom) < 0, python3(xml.etree.ElementPath) < 0, python3(xml.etree.ElementTree) < 0, python3(yapps) < 0, python3.11-ABI, rtld(GNU_HASH), sudo, tcl, tcl(BWidget), tcl(Tk), tcl(Tk)-8 >= 8.0, termutils, tk, typelib(GLib), typelib(GObject), typelib(Gdk), typelib(GdkPixbuf), typelib(GdkX11), typelib(Gio), typelib(Gst), typelib(Gtk), typelib(GtkSource), typelib(Notify), typelib(Pango), typelib(PangoCairo), typelib(Vte), util-linux, xdpyinfo Requires(rpmlib): rpmlib(SetVersions) Obsoletes: linuxcnc-data <= 2.9.1-alt1.20231009 Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.N8Rd3E Creating linuxcnc-debuginfo package Processing files: liblinuxcnc-devel-2.9.1-alt1.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.xO2Mve find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.Q0bPCW find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed, trying c++ mode In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h:6: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/axis.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/modal_state.hh:25:10: fatal error: vector: No such file or directory 25 | #include | ^~~~~~~~ compilation terminated. cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/emc.hh: cpp failed, trying c++ mode /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh: cpp failed /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh:19:10: fatal error: rpc/rpc.h: No such file or directory 19 | #include /* struct XDR */ | ^~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/cms_xup.hh: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h:24: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genhexkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags 130 | #error HAL needs RTAPI/ULAPI, check makefile and flags | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h:20: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h:34: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_device.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_string.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h:19: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_parport.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h:33: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_firmware.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h:22: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hostmot2-serial.h: cpp failed In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_math.h:19, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h:40: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!" 63 | #error "Please define either RTAPI or ULAPI!" | ^~~~~ cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_vsnprintf.h: cpp failed In file included from /usr/include/boost/python/detail/prefix.hpp:13, from /usr/include/boost/python/object_fwd.hpp:8, from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh:27: /usr/include/boost/python/detail/wrap_python.hpp:57:11: fatal error: pyconfig.h: No such file or directory 57 | # include | ^~~~~~~~~~~~ compilation terminated. cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/interp_internal.hh: cpp failed ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.1-alt1.20231009, /usr/lib/liblinuxcnchal.so.0, /usr/lib/liblinuxcncini.so.0, /usr/lib/libnml.so.0, /usr/lib/libposemath.so.0, /usr/lib/libpyplugin.so.0, /usr/lib/librs274.so.0, /usr/lib/libtooldata.so.0, boost-devel-headers Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.rJ2046 Processing files: liblinuxcnc-2.9.1-alt1.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.fSsdPf find-provides: running scripts (alternatives,debuginfo,gir,lib,pam,perl,pkgconfig,python,python3,shell,tcl,typelib) lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcnchal.so.0: 119 symbols, 17 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/liblinuxcncini.so.0: 35 symbols, 16 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libnml.so.0: 836 symbols, 20 bpp warning: hash collision: _ZN3NML12format_inputEP6NMLmsg count_characters_in_print_list lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libposemath.so.0: 415 symbols, 19 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libpyplugin.so.0: 23 symbols, 15 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/librs274.so.0: 2001 symbols, 21 bpp lib.prov: /usr/src/tmp/linuxcnc-buildroot/usr/lib/libtooldata.so.0: 21 symbols, 15 bpp Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.ts3tDn find-requires: running scripts (cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,tcl,typelib) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: liblinuxcnchal.so.0 = set:kdPx9FV9ytdOTAcj2wZ2JZ1oelSL8Dffacm8WsZoCDWmPG0ZELZCd2Zp9FYdzzhXwhJ7XGIMyaSxhxF1dJRZokJmY3XFhezGOM9yF7E66OksQbPwjzE8K0ehVNZgtO2R5olOpktUG01FtHfsaGII1q2WIvIdkZ5fGg3mpzBV5cZ4g17whzsRrZ7xAmehHHeQMz7E5hNYUIPmWiMLuqjoHn1G8DA4NA9wKIGk7zCMgNKFs2, liblinuxcncini.so.0 = set:jd3p0VwoIC1nklrvwZ0QglXYuh9w4nU6472TqASbUMZzhuUpq1XaKcom1djYYwSVwS7phRSmhfo, libnml.so.0 = set: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, libposemath.so.0 = set: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, libpyplugin.so.0 = set:idBFZwgrre0pwfJqgC8pQet6wQkGgNxAjT5GzcsH3a2zLVzhb, librs274.so.0 = set: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, libtooldata.so.0 = set:idcn3SG02VQhlyUMMkL8VGeZhZwdGO0BiZAtgbZ6l817P1 Requires: libboost_python311.so.1.83.0 >= set:mfmDqBt0yXYy5AuMd0wKAcRNctAQZdRNvzbB8RqM5mGwkKXcGCRDdTPzyNuojQRqzp5SpoxPKmKTnJQ2USkkKqHp5h4X8nhmZbVJeHI3ENEULfvnhZ91wcZ0CZvtZ8nZ1cmY40zffx00SV7xgZcNECROSo2uL0z8NWcqw53ax89vvrKGYx5Bq0C60, libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.15), libc.so.6(GLIBC_2.17), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.28), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3.3), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.32), libc.so.6(GLIBC_2.33), libc.so.6(GLIBC_2.34), libc.so.6(GLIBC_2.38), libc.so.6(GLIBC_2.4), libc.so.6(GLIBC_2.9), libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_4.0.0), libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.29), libm.so.6(GLIBC_2.35), libpython3.11.so.1.0 >= set:oi0GOBAUI3x9Zm2hWASt1vZ3R4nYYfA4VAH3joq8Yna2GUTvbSg3QBmBWdwKz06SOh5x1fxZEHbvodwVQDokPlMCfIgsrE3xO1AuPv374qZiTjyQZcRdeSUEtPaaoPfwkCRbdyfJ0, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3.5), libstdc++.so.6(CXXABI_1.3.9), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.11), libstdc++.so.6(GLIBCXX_3.4.15), libstdc++.so.6(GLIBCXX_3.4.18), libstdc++.so.6(GLIBCXX_3.4.21), libstdc++.so.6(GLIBCXX_3.4.26), libstdc++.so.6(GLIBCXX_3.4.29), libstdc++.so.6(GLIBCXX_3.4.32), libstdc++.so.6(GLIBCXX_3.4.9), libtirpc.so.3 >= set:miLQRMTfkMBlyKlAtNseOZekznKvK3HZEZCwnOh, libtirpc.so.3(TIRPC_0.3.0), rtld(GNU_HASH) Requires(rpmlib): rpmlib(SetVersions) Finding debuginfo files (using /usr/lib/rpm/find-debuginfo-files) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.Zn7ago Creating liblinuxcnc-debuginfo package Processing files: linuxcnc-debuginfo-2.9.1-alt1.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.b1MyfY find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.eB3k0u find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Requires: linuxcnc = 2.9.1-alt1.20231009, /usr/lib/debug/lib/ld-linux.so.2.debug, debug(libX11.so.6), debug(libXinerama.so.1), debug(libXmu.so.6), debug(libboost_python311.so.1.83.0), debug(libc.so.6), debug(libcairo.so.2), debug(libepoxy.so.0), debug(libgcc_s.so.1), debug(libgdk-3.so.0), debug(libgdk-x11-2.0.so.0), debug(libglib-2.0.so.0), debug(libgobject-2.0.so.0), debug(libgtk-3.so.0), debug(libgtk-x11-2.0.so.0), debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libm.so.6), debug(libmodbus.so.5), debug(libnml.so.0), debug(libpango-1.0.so.0), debug(libpangocairo-1.0.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(libpython3.11.so.1.0), debug(libreadline.so.8), debug(librs274.so.0), debug(libstdc++.so.6), debug(libtk8.6.so), debug(libtooldata.so.0), debug(libudev.so.1), debug(libusb-1.0.so.0) Processing files: liblinuxcnc-debuginfo-2.9.1-alt1.20231009 Finding Provides (using /usr/lib/rpm/find-provides) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.NM4cIk find-provides: running scripts (debuginfo) Finding Requires (using /usr/lib/rpm/find-requires) Executing: /bin/sh -e /usr/src/tmp/rpm-tmp.zQsZjX find-requires: running scripts (debuginfo) ++ /bin/sed -e 's/^.*rip-environment//' -e 's/^.*typelib(Cairo)//' Provides: debug(liblinuxcnchal.so.0), debug(liblinuxcncini.so.0), debug(libnml.so.0), debug(libposemath.so.0), debug(libpyplugin.so.0), debug(librs274.so.0), debug(libtooldata.so.0) Requires: liblinuxcnc = 2.9.1-alt1.20231009, debug(libboost_python311.so.1.83.0), debug(libc.so.6), debug(libgcc_s.so.1), debug(libm.so.6), debug(libpython3.11.so.1.0), debug(libstdc++.so.6), debug(libtirpc.so.3) Adding to liblinuxcnc-devel a strict dependency on linuxcnc Adding to linuxcnc a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on linuxcnc Adding to liblinuxcnc-debuginfo a strict dependency on liblinuxcnc Adding to liblinuxcnc-devel a strict dependency on liblinuxcnc Adding to linuxcnc-debuginfo a strict dependency on liblinuxcnc-debuginfo Removing from linuxcnc-debuginfo 47 sources provided by liblinuxcnc-debuginfo also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/emc/pythonplugin also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/cms also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/linklist also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/nml also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/os_intf also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/posemath also prunning dir /usr/src/debug/linuxcnc-2.9.1/src/libnml/rcs Removing 7 extra deps from linuxcnc due to dependency on liblinuxcnc Removing 7 extra deps from liblinuxcnc-devel due to dependency on liblinuxcnc Removing 7 extra deps from linuxcnc-debuginfo due to dependency on liblinuxcnc-debuginfo Removing 1 extra deps from liblinuxcnc-devel due to repentancy on linuxcnc Removing 31 extra deps from linuxcnc due to repentancy on liblinuxcnc Removing 6 extra deps from linuxcnc-debuginfo due to repentancy on liblinuxcnc-debuginfo Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-2.9.1-alt1.20231009.i586.rpm (w2T8.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-devel-2.9.1-alt1.20231009.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-2.9.1-alt1.20231009.i586.rpm (w2.lzdio) Wrote: /usr/src/RPM/RPMS/i586/linuxcnc-debuginfo-2.9.1-alt1.20231009.i586.rpm (w2T8.xzdio) Wrote: /usr/src/RPM/RPMS/i586/liblinuxcnc-debuginfo-2.9.1-alt1.20231009.i586.rpm (w2T8.xzdio) 436.86user 114.49system 4:20.55elapsed 211%CPU (0avgtext+0avgdata 475136maxresident)k 0inputs+0outputs (0major+24582787minor)pagefaults 0swaps 13.12user 4.22system 6:20.86elapsed 4%CPU (0avgtext+0avgdata 123652maxresident)k 6440inputs+0outputs (0major+381941minor)pagefaults 0swaps --- linuxcnc-2.9.1-alt1.20231009.i586.rpm.repo 2023-10-09 09:18:31.000000000 +0000 +++ linuxcnc-2.9.1-alt1.20231009.i586.rpm.hasher 2023-10-14 07:38:48.856584968 +0000 @@ -6603,2 +6603,4 @@ Requires: gawk +Requires: gcc-common +Requires: git-core Requires: grep @@ -6631,2 +6633,4 @@ Requires: libusb-1.0.so.0 >= set:kfCccnDr9jFflJJNyBvyUOXGYMasiIO21Nav1EX3IAfnqJu +Requires: lsb-release +Requires: procps Requires: python3 @@ -6707,2 +6711,3 @@ Requires: sudo +Requires: tcl Requires: tcl(BWidget) @@ -6726,2 +6731,3 @@ Requires: util-linux +Requires: xdpyinfo Requires: liblinuxcnc = 2.9.1-alt1.20231009:sisyphus+331268.100.2.2 @@ -7059,3 +7065,3 @@ File: /etc/linuxcnc 40755 root:root -File: /etc/linuxcnc/rtapi.conf 100644 root:root 090f7d8df2221b5534e2a0929a632379 +File: /etc/linuxcnc/rtapi.conf 100644 root:root c550f19b19f8d7bb838414f827fcb142 File: /lib/udev/rules.d/99-shuttle.rules 100644 root:root 45b3d96aa2c8815f94b48be50365ce52 @@ -7359,3 +7365,3 @@ File: /usr/lib/linuxcnc/modules/xyzbc-trt-kins.so 100644 root:root 4386ca6e56340a069fbc9559cc7e398e -File: /usr/lib/linuxcnc/realtime 100755 root:root dced79b6102c2fe5a03689d95e89929d +File: /usr/lib/linuxcnc/realtime 100755 root:root 5487e954029aa2b4b97bbc7edb4b8fd0 File: /usr/lib/python3/site-packages/__pycache__ 40755 root:root @@ -12359,3 +12365,3 @@ File: /usr/share/man/man1/panelui.1.xz 100644 root:root 61f547f5665fc80d03da476743e17d4d -File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root 9ceae3ba74e0440d8a822bd0b8524ecb +File: /usr/share/man/man1/pi500_vfd.1.xz 100644 root:root eb2f687a82b2070824f5ea95f94690ac File: /usr/share/man/man1/pmx485-test.1.xz 100644 root:root 20b815b28f4df48358282e8d88b3a0fa @@ -12388,3 +12394,3 @@ File: /usr/share/man/man1/teach-in.1.xz 100644 root:root fc226b9d2b564e3fad4c5ff0b945c813 -File: /usr/share/man/man1/thermistor.1.xz 100644 root:root 1ade45dca09ee21f76dccfafa917b980 +File: /usr/share/man/man1/thermistor.1.xz 100644 root:root d609a2aab73858e8ede77bd1671a8741 File: /usr/share/man/man1/tooledit.1.xz 100644 root:root c7d86f1ec43340e80f69de9a88166fd8 @@ -12394,3 +12400,3 @@ File: /usr/share/man/man1/vfs11_vfd.1.xz 100644 root:root 65395473fdddbe5a7f8789b49d8b6b37 -File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root d3eb0fab5976f03bb434f564b17dd380 +File: /usr/share/man/man1/wj200_vfd.1.xz 100644 root:root d139a59e33095b58a5147700389b268d File: /usr/share/man/man1/xhc-hb04-accels.1.xz 100644 root:root 0cff8637e027604edb6d81ff9beaa4ff @@ -12515,44 +12521,44 @@ File: /usr/share/man/man3/undocumented.3rtapi.xz 100644 root:root 002b721b89292b438d9dbf89f1ff823b -File: /usr/share/man/man9/abs.9.xz 100644 root:root 9e90a74faf55dfa38a0d34d57597cc95 -File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root ec3c32fd181a11eb4f92bbb3162e95ac -File: /usr/share/man/man9/and2.9.xz 100644 root:root 3cf6a465f244fcb3dcb440272e5d1793 -File: /usr/share/man/man9/anglejog.9.xz 100644 root:root af67bcb9d1995d2a7a4f12f18d12a71c +File: /usr/share/man/man9/abs.9.xz 100644 root:root 7bbd2b4fa8f9543eb7e11467807d5b24 +File: /usr/share/man/man9/abs_s32.9.xz 100644 root:root 4317911921c246c7a9f8d46a4db01661 +File: /usr/share/man/man9/and2.9.xz 100644 root:root 839fd31ca55acad24a0e0e4faf2c044a +File: /usr/share/man/man9/anglejog.9.xz 100644 root:root 596b1f49cbcce877aa6b240d6948c758 File: /usr/share/man/man9/at_pid.9.xz 100644 root:root d578fa506b91fa3aa94136679b39f656 File: /usr/share/man/man9/axis.9.xz 100644 root:root f688c161a447b4d64af5406eaa4b3c09 -File: /usr/share/man/man9/axistest.9.xz 100644 root:root 7bb55cd27efa529ad0733803f2f3908c -File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root 259e947b932d15808dac2dee3f5d1f8a -File: /usr/share/man/man9/biquad.9.xz 100644 root:root 28259b9284f224f573d7f0c2855dc6a7 -File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 2f943fb8e31b9f525eb7c2d5550a32b0 -File: /usr/share/man/man9/bitwise.9.xz 100644 root:root 7baa68de1936f6534d31f1daa32ceee8 -File: /usr/share/man/man9/bldc.9.xz 100644 root:root f344e9439c8ba9406f156cfe155902f7 -File: /usr/share/man/man9/blend.9.xz 100644 root:root 0c521a42c4f50f56dc73bd0789370efb -File: /usr/share/man/man9/carousel.9.xz 100644 root:root 83856227c68ad4cdb8a2f46c486f83a0 -File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root cd4a27ba2418d94f28f5fd675b45b9ed -File: /usr/share/man/man9/clarke2.9.xz 100644 root:root dd327771cbda8a5ff1fc58d2275e10d2 -File: /usr/share/man/man9/clarke3.9.xz 100644 root:root ad47d94844fb50ccb7a9e541caac04d6 -File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 3bf8a3aadb6a3816cce953e5f9195e17 +File: /usr/share/man/man9/axistest.9.xz 100644 root:root 44be437b1ab48c660f03cc742eac1d40 +File: /usr/share/man/man9/bin2gray.9.xz 100644 root:root d20a84ed104d497a7383be2f242e4af0 +File: /usr/share/man/man9/biquad.9.xz 100644 root:root 9a0f137d9da249f10626fcddff90f4b0 +File: /usr/share/man/man9/bitslice.9.xz 100644 root:root 25e1ca6bb2d1ba2edc91b1e71697bf30 +File: /usr/share/man/man9/bitwise.9.xz 100644 root:root a874eb9f19f6f976bfaf355727576eef +File: /usr/share/man/man9/bldc.9.xz 100644 root:root e4a259accc20c64c5ad735258c3fd662 +File: /usr/share/man/man9/blend.9.xz 100644 root:root e010b3178e7f002e2b09a55a9d50e616 +File: /usr/share/man/man9/carousel.9.xz 100644 root:root 3a5b4c252d4e8d61a6e1c78c5c6ff5fb +File: /usr/share/man/man9/charge_pump.9.xz 100644 root:root d046f8bcabc0e67254948b3def5736f8 +File: /usr/share/man/man9/clarke2.9.xz 100644 root:root d658a46a3c8adc0b560b91db25049a55 +File: /usr/share/man/man9/clarke3.9.xz 100644 root:root 4f6ca878e238dad49ec6104df98128eb +File: /usr/share/man/man9/clarkeinv.9.xz 100644 root:root 96af6f2c44021b18fa8784101740536a File: /usr/share/man/man9/classicladder.9.xz 100644 root:root 0a15b834496451ff9a41f7297f36b0f0 -File: /usr/share/man/man9/comp.9.xz 100644 root:root 3a50c8fa7af6c9c4384db7e497679579 -File: /usr/share/man/man9/constant.9.xz 100644 root:root 03f91e07b9eeb089392310c2087af23a -File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root 3a9578757597e63b3c9824f62ec4aeef -File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root 1bfabafd79639922dee5ceb9a837258a -File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 6413cc87ff72fd2bcf7fe475b1eb1ccb -File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root 37e62c68077a4e201bf6624761d0b3f2 -File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root f31683c4bd32490c70ef94649c8fbd62 -File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 71d799f06ce6ff9d2e6d92cb0eba8d75 -File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root d62b0ab63eab875f8f3b31fdf112805d -File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root ec94ed60a0e4f6d21c5e3f6c8b7df54b -File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root ef7a780018e58289a5c84e8edb688f55 -File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root 94bb2b8b9338da32740b1b4ce8f14072 -File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root a1786a5ff801104e751e50f030e2f691 -File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root a78899a39e59905819156de4f0b943e6 +File: /usr/share/man/man9/comp.9.xz 100644 root:root a632462f42f00702230161e96d32a010 +File: /usr/share/man/man9/constant.9.xz 100644 root:root 8a6d552492c5b2a46cfaa6d82a0f9078 +File: /usr/share/man/man9/conv_bit_float.9.xz 100644 root:root f83a66687f8005170815c8760c9686ab +File: /usr/share/man/man9/conv_bit_s32.9.xz 100644 root:root 2f18ab8b8c44f6f9915fc122bf62cfb4 +File: /usr/share/man/man9/conv_bit_u32.9.xz 100644 root:root 0ba74bbf52bf0e627b2b1f4b6a5a9ea2 +File: /usr/share/man/man9/conv_float_s32.9.xz 100644 root:root d9526c7c1905976842bcaf43a128e2d0 +File: /usr/share/man/man9/conv_float_u32.9.xz 100644 root:root 6ffc78e6522d51eddcea0f33942f9eed +File: /usr/share/man/man9/conv_s32_bit.9.xz 100644 root:root 23b464720780d7395f962e8a9aae91cc +File: /usr/share/man/man9/conv_s32_float.9.xz 100644 root:root 6e6042d5c3e8055b66172df8e5e83197 +File: /usr/share/man/man9/conv_s32_u32.9.xz 100644 root:root cfda274fbf65fd2cd8a3d74c74cd2ecb +File: /usr/share/man/man9/conv_u32_bit.9.xz 100644 root:root 374924fda5ee5d0f31aa75d04182ed0e +File: /usr/share/man/man9/conv_u32_float.9.xz 100644 root:root eb46de8488cd02a5464a12237e53193f +File: /usr/share/man/man9/conv_u32_s32.9.xz 100644 root:root 3209fce6cdaf5e7b11320f88eb615003 +File: /usr/share/man/man9/corexy_by_hal.9.xz 100644 root:root 24f3859a36cab8e2d41d59d915bf5846 File: /usr/share/man/man9/counter.9.xz 100644 root:root 83f81a48047a93aac54a70c298a8b8ee -File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 10ae5bcaeb2e3d3a4dd2fd315a3d0eca -File: /usr/share/man/man9/ddt.9.xz 100644 root:root 6bb2a189efc8b13e0fa8c8930f77b058 -File: /usr/share/man/man9/deadzone.9.xz 100644 root:root fd6de53ca18305e67ea71dd4bb7f5ca5 +File: /usr/share/man/man9/dbounce.9.xz 100644 root:root 33aa160637b3d41ac0d234d5d26512e8 +File: /usr/share/man/man9/ddt.9.xz 100644 root:root 2fa8db94c2f359abaf66e516320ff61e +File: /usr/share/man/man9/deadzone.9.xz 100644 root:root 70f280fa8fcac95a190db33f07962007 File: /usr/share/man/man9/debounce.9.xz 100644 root:root bd2406b69a89bf1c3ef92b42bfe93f3d -File: /usr/share/man/man9/demux.9.xz 100644 root:root 13fedd42d50b9c680e25b84da3667cc2 -File: /usr/share/man/man9/differential.9.xz 100644 root:root cb5655ab46ee3db5b8bbfcd32ce0bee2 -File: /usr/share/man/man9/div2.9.xz 100644 root:root 12e4cb79cd45fb9280c13d0692c61535 -File: /usr/share/man/man9/edge.9.xz 100644 root:root f6936e1df40c4a8c46a63af4863dd852 +File: /usr/share/man/man9/demux.9.xz 100644 root:root bbaca1170ad71fd837b7c2bbe18e1b76 +File: /usr/share/man/man9/differential.9.xz 100644 root:root ae14de5a087c0de7ee60c2f7340b0e9a +File: /usr/share/man/man9/div2.9.xz 100644 root:root 66d80b9204e69d9a6b7dd62ad422692c +File: /usr/share/man/man9/edge.9.xz 100644 root:root 31ef6659c95e4fa06c70ee2545cca5c5 File: /usr/share/man/man9/encoder.9.xz 100644 root:root 12631bc793eb57261edeccfb1868447a @@ -12560,10 +12566,10 @@ File: /usr/share/man/man9/enum.9.xz 100644 root:root d8dba8dc7088553ce526db5d6034074a -File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 49d4e6a344dc263cf31bf656e82a087d -File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 2874782d244a23ac91fa2fc6598a0ffa -File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root 96e92a5e523ce9952e289fb3a9f0fb59 -File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root c55062517f6cc3420e63e04a16c73d08 -File: /usr/share/man/man9/flipflop.9.xz 100644 root:root 5f98dfdc4184ceac4a361a97d2d998b3 -File: /usr/share/man/man9/gantry.9.xz 100644 root:root 4a8b2949d5165c7ec721fcef9237130b +File: /usr/share/man/man9/eoffset_per_angle.9.xz 100644 root:root 6585cb6ca2e162aa7913c98a37751655 +File: /usr/share/man/man9/estop_latch.9.xz 100644 root:root 94eed1707c12a3ca4139b5e0456756f2 +File: /usr/share/man/man9/feedcomp.9.xz 100644 root:root dbdd19c5087f521c10781bf153db8844 +File: /usr/share/man/man9/filter_kalman.9.xz 100644 root:root 0bd338d55131dc75090735799f2765ee +File: /usr/share/man/man9/flipflop.9.xz 100644 root:root 2863ab047d247dba9532623a4388ad16 +File: /usr/share/man/man9/gantry.9.xz 100644 root:root 7898d31fd673c0a0c43db0e1aa96246e File: /usr/share/man/man9/gantrykins.9.xz 100644 root:root a388b2c041c10d2e154213b6a190d69e -File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 8a4faa126a4cc087968f13b7c03b8aa8 +File: /usr/share/man/man9/gearchange.9.xz 100644 root:root 32fcce4458b8a3297216c4375836ea37 File: /usr/share/man/man9/genhexkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12572,6 +12578,6 @@ File: /usr/share/man/man9/gladevcp.9.xz 100644 root:root 26d85cce38cef8e5cee1a6845d897b4d -File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root aaa26bc29c9bb83f4f0ab5bbd6870a9b +File: /usr/share/man/man9/gray2bin.9.xz 100644 root:root 15d317c9ddeabc3227d244d4a031bcf7 File: /usr/share/man/man9/hal_bb_gpio.9.xz 100644 root:root b8610c3245eb6a6a34b2071dae79effe File: /usr/share/man/man9/hal_parport.9.xz 100644 root:root 0e9862dfa7a66f23eff384631bc10a25 -File: /usr/share/man/man9/histobins.9.xz 100644 root:root 0643b4616f3771d1870288f43f6d0aca +File: /usr/share/man/man9/histobins.9.xz 100644 root:root e522b7727724522b682150e6f3f3689c File: /usr/share/man/man9/hm2_7i43.9.xz 100644 root:root ec628cb4aadd965825a78075995c1e2e @@ -12582,54 +12588,54 @@ File: /usr/share/man/man9/hm2_spi.9.xz 100644 root:root 382b4ac9c860f7945c061b1e9bd15cdf -File: /usr/share/man/man9/homecomp.9.xz 100644 root:root b82968ac256a5b23f1815ddeb638977b +File: /usr/share/man/man9/homecomp.9.xz 100644 root:root 0a6a88c25919e3ea2576eca989150cf9 File: /usr/share/man/man9/hostmot2.9.xz 100644 root:root 65c28ac9f89cfc19cb43607dd0b6561b -File: /usr/share/man/man9/hypot.9.xz 100644 root:root c4f03e3b8a8706e641cd3259d34ccbc5 -File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root 6e7eec5a6b4f39bbb7b62db97ca6edf9 -File: /usr/share/man/man9/integ.9.xz 100644 root:root 33401c0f10bfd9564ec0412688e16938 -File: /usr/share/man/man9/invert.9.xz 100644 root:root 0d10768aa4caa3616bb92fc04b82ce89 -File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root ad94e4718cc37b5f7ac510b029943064 +File: /usr/share/man/man9/hypot.9.xz 100644 root:root 0fe9e676b9783ca5b0b7b928d9b824d3 +File: /usr/share/man/man9/ilowpass.9.xz 100644 root:root f1101275394ef6548c2b5cc7a0e1481b +File: /usr/share/man/man9/integ.9.xz 100644 root:root b5553c33d987b55c8e51ea2c06acdfaa +File: /usr/share/man/man9/invert.9.xz 100644 root:root e6b40d164503249963e42ed4a0bf54f2 +File: /usr/share/man/man9/joyhandle.9.xz 100644 root:root aeb8869b186efdd023186b552523f7a0 File: /usr/share/man/man9/kins.9.xz 100644 root:root 7ef613a8265b032556c4e99f80eeee38 -File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 767e64bdaf911401191d11b68fbdedd1 -File: /usr/share/man/man9/latencybins.9.xz 100644 root:root 7e464b4fb9c2e7d0f45c7db04d8dbab8 +File: /usr/share/man/man9/knob2float.9.xz 100644 root:root 0599b8b2b4bfa33ab06d8afd6adb9145 +File: /usr/share/man/man9/latencybins.9.xz 100644 root:root ac89a6b5de25318f1f9104e9fcc28197 File: /usr/share/man/man9/lcd.9.xz 100644 root:root 620cc2889dca47fa4e7586ff480ba974 -File: /usr/share/man/man9/limit1.9.xz 100644 root:root 89d44634975f660d840c54b56620cd3b -File: /usr/share/man/man9/limit2.9.xz 100644 root:root b44a2f68fd297836afec634e5f8ab072 -File: /usr/share/man/man9/limit3.9.xz 100644 root:root 17dabec368f2d6f0e0134378b1095be8 -File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root 11bbc0c237aa96607e6a356252e31dd8 -File: /usr/share/man/man9/lincurve.9.xz 100644 root:root a1aa2a1c427211b4bbb2201be88b60c7 +File: /usr/share/man/man9/limit1.9.xz 100644 root:root 416d4fb935ec6e520c8178a7a91f5231 +File: /usr/share/man/man9/limit2.9.xz 100644 root:root d02bda4e587c205fd3b3314880850128 +File: /usr/share/man/man9/limit3.9.xz 100644 root:root 6047652758ecb470e72b586bab5cd6cc +File: /usr/share/man/man9/limit_axis.9.xz 100644 root:root be5eeb57434efc88dd6698b478b6f6b1 +File: /usr/share/man/man9/lincurve.9.xz 100644 root:root 005e3e0171ec16156df136e559ebeb34 File: /usr/share/man/man9/lineardeltakins.9.xz 100644 root:root ce6ac2a9983a327635ddcd90d0e26def -File: /usr/share/man/man9/logic.9.xz 100644 root:root 0d234875a10c636d7cbdaff0cb3b9cc0 -File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 2fcad71e25654a501317806e452f9a9e -File: /usr/share/man/man9/lut5.9.xz 100644 root:root b997626765b72c4703c4780aceab764c -File: /usr/share/man/man9/maj3.9.xz 100644 root:root 3cc9602826c30374f8933f62828afb0a -File: /usr/share/man/man9/match8.9.xz 100644 root:root 8a2aa09f31ea2d81159b0cf9bf6520db +File: /usr/share/man/man9/logic.9.xz 100644 root:root 144e0a9374f3bcb43862fb08527759c1 +File: /usr/share/man/man9/lowpass.9.xz 100644 root:root 2231e728c3f1848915f0f13a5724f0df +File: /usr/share/man/man9/lut5.9.xz 100644 root:root 5d3a903bdd372b024e170ff78575f9b0 +File: /usr/share/man/man9/maj3.9.xz 100644 root:root 533f67e489eaddc62cff41ea6db62988 +File: /usr/share/man/man9/match8.9.xz 100644 root:root dbb5c7804ec4196ddac5b017287daad1 File: /usr/share/man/man9/matrix_kb.9.xz 100644 root:root 339c35c251b89cbdb7a0e83bce7035d9 -File: /usr/share/man/man9/max31855.9.xz 100644 root:root 06da682795aa5fc0b83b88f87b238767 +File: /usr/share/man/man9/max31855.9.xz 100644 root:root 5427d7af3e744197dfc598c44233eb27 File: /usr/share/man/man9/maxkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root 3b408976ddc9b8db5d0a6415e9d84a6c -File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root 21d8df3412b5dffc1606ed96a79080b0 -File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 3ce1805ee8b6905d0fa77bba3710a536 -File: /usr/share/man/man9/message.9.xz 100644 root:root e65db42bd15258eed6808cf7b43f5495 -File: /usr/share/man/man9/millturn.9.xz 100644 root:root 873564815314f4c0e3f518e99a9077ec -File: /usr/share/man/man9/minmax.9.xz 100644 root:root 94cd0e0224badfcd94d79a2b0efe8cb6 +File: /usr/share/man/man9/mesa_7i65.9.xz 100644 root:root e40623ecbe7228f2dd55a880231817a4 +File: /usr/share/man/man9/mesa_pktgyro_test.9.xz 100644 root:root cb4adda4eb18b2cf56c32b8a65677e30 +File: /usr/share/man/man9/mesa_uart.9.xz 100644 root:root 9e2f6c1a4b12276892d9286d26ac3d5a +File: /usr/share/man/man9/message.9.xz 100644 root:root eb3b1bfe79709c9677573e55e84cc104 +File: /usr/share/man/man9/millturn.9.xz 100644 root:root 1b35d561c1baaeeb40d5254596f4dad7 +File: /usr/share/man/man9/minmax.9.xz 100644 root:root 75d4e55440662dcf9b4d36dcafef32c5 File: /usr/share/man/man9/motion.9.xz 100644 root:root 52de9abe229c718ed49a6e7c1fc183b4 -File: /usr/share/man/man9/moveoff.9.xz 100644 root:root 5aacef2995f214b28a8081d5c5eba6c0 -File: /usr/share/man/man9/mult2.9.xz 100644 root:root b5fb49243cb1488ee14e4a3505c9c704 -File: /usr/share/man/man9/multiclick.9.xz 100644 root:root 0686ee554215256a0c253191374259e7 -File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root 5125db1719f0391bdaec131daeb4ab72 -File: /usr/share/man/man9/mux16.9.xz 100644 root:root 145f8c7e569efe93ffe0e33800c65cb8 -File: /usr/share/man/man9/mux2.9.xz 100644 root:root 1a0387f17e9b680b82356ca83c736c28 -File: /usr/share/man/man9/mux4.9.xz 100644 root:root 11bc101df3e274f5d5eee352e878ab40 -File: /usr/share/man/man9/mux8.9.xz 100644 root:root 433de025b53ff76a6881c36e61e8606a +File: /usr/share/man/man9/moveoff.9.xz 100644 root:root ca47dbbe46b95f56ec05b162e55a79ab +File: /usr/share/man/man9/mult2.9.xz 100644 root:root d6166c6280cb2ddb772adac655c5f952 +File: /usr/share/man/man9/multiclick.9.xz 100644 root:root 904d8cf656663c3b12ac53d5ee38b8a2 +File: /usr/share/man/man9/multiswitch.9.xz 100644 root:root c8aafeb83bed411a94b73714df3f44c9 +File: /usr/share/man/man9/mux16.9.xz 100644 root:root 3b113201d39da009ae6c39492c1b15b3 +File: /usr/share/man/man9/mux2.9.xz 100644 root:root 0f1aaf11040235cfd37b114589c9f850 +File: /usr/share/man/man9/mux4.9.xz 100644 root:root bd8f897fa77e6e8f18f922799142128c +File: /usr/share/man/man9/mux8.9.xz 100644 root:root b2b1e4e02e65ecaac09f84aa54aeb8ac File: /usr/share/man/man9/mux_generic.9.xz 100644 root:root 81ed0423e2b5c893c152d9ed4491b0f5 -File: /usr/share/man/man9/near.9.xz 100644 root:root 8c4f671e8832321d5c0d5feb42a973db -File: /usr/share/man/man9/not.9.xz 100644 root:root f8198459e2a3eed8ae4ee648c4d76ddc -File: /usr/share/man/man9/offset.9.xz 100644 root:root 0b646a35ebfb4e68dd18d7aded6c450d -File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 4a31aab40e87897d647c8ba5ed0542ae -File: /usr/share/man/man9/oneshot.9.xz 100644 root:root 72405a981547fc556b2e671e65d3efae +File: /usr/share/man/man9/near.9.xz 100644 root:root 1b3ac3ba047a97202e8f789d5d40a636 +File: /usr/share/man/man9/not.9.xz 100644 root:root b0a5d9098e3eacf645c0f44bd1a9b9d8 +File: /usr/share/man/man9/offset.9.xz 100644 root:root b4c45db6726fc1895fcc49dd49081a58 +File: /usr/share/man/man9/ohmic.9.xz 100644 root:root 788a4926ea483c83ab125a809a4a2235 +File: /usr/share/man/man9/oneshot.9.xz 100644 root:root ee0c840fa2f92ef62f3e61150ce3e886 File: /usr/share/man/man9/opto_ac5.9.xz 100644 root:root ed6aa04a42b4697aea2bc5fc7de8500a -File: /usr/share/man/man9/or2.9.xz 100644 root:root f28e12da14833b3cb254904f45c942b7 -File: /usr/share/man/man9/orient.9.xz 100644 root:root d25255898834c78c55a9cf49c4354de0 +File: /usr/share/man/man9/or2.9.xz 100644 root:root 0de28dec229462604ca00f1e229a0d0a +File: /usr/share/man/man9/orient.9.xz 100644 root:root 45de6ac175ab0668138cd9dfce28aec4 File: /usr/share/man/man9/pentakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 File: /usr/share/man/man9/pid.9.xz 100644 root:root 9106a5d37a8880989de46921cdb78588 -File: /usr/share/man/man9/plasmac.9.xz 100644 root:root 28b7beaf593e011d541c0f84eb52085b +File: /usr/share/man/man9/plasmac.9.xz 100644 root:root 2db4ff49f85374dc72d7085487191d92 File: /usr/share/man/man9/pumakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 @@ -12638,52 +12644,52 @@ File: /usr/share/man/man9/rotatekins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root 6b1e8789379a82103848eb2b1b31b9f3 +File: /usr/share/man/man9/sample_hold.9.xz 100644 root:root ab5d0b6f596b0f6aa13805063392d645 File: /usr/share/man/man9/sampler.9.xz 100644 root:root 713192b4e67ac75366e7848681137025 -File: /usr/share/man/man9/scale.9.xz 100644 root:root b1e8a164ee14021020ee177edb69c4cc -File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root 7f6585ec5364bf4677324ad5243b848e +File: /usr/share/man/man9/scale.9.xz 100644 root:root 2bd5395286473b83f407dd5340c601da +File: /usr/share/man/man9/scaled_s32_sums.9.xz 100644 root:root ab6201c3caa33e389a2477c3a9565d35 File: /usr/share/man/man9/scarakins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/select8.9.xz 100644 root:root dfc1b5fd6686131123052c1a17efe961 -File: /usr/share/man/man9/serport.9.xz 100644 root:root ae3e38974a02a1f553980a930a9ebd30 +File: /usr/share/man/man9/select8.9.xz 100644 root:root 83f72a17abf917c70c0817d8b144f9b4 +File: /usr/share/man/man9/serport.9.xz 100644 root:root 4ec9ce57db4a1e0c69b12b4c7fcab73b File: /usr/share/man/man9/setsserial.9.xz 100644 root:root a0c4c6061b229bf1b0bd7b45aa0a6d1b File: /usr/share/man/man9/siggen.9.xz 100644 root:root bb8a58ed0261c53246a616a6e5859857 -File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root a9b8ad71a46aeb543323d49b48f0098f +File: /usr/share/man/man9/sim_axis_hardware.9.xz 100644 root:root 841ba1fe032f883bcb72c49aeee71550 File: /usr/share/man/man9/sim_encoder.9.xz 100644 root:root 1061200399dc5f45100c0b9ac0b34ddc -File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 377c4ef799247d32e03ae5b68d1b236f -File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root 0e2bae77118ed74be563c5fa8cc4fa78 -File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 4e409d88ee3b860956bdcabc28348024 -File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 034c8697c6d92f6d6cc4bac364888642 -File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 16eeeeb0fe5256a3495d1d0f3064bf91 -File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 886a68b8d6989aee9289aa2d68cc754a -File: /usr/share/man/man9/spindle.9.xz 100644 root:root fa57f6b7e7e99fe098a397478b5e12e0 -File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root 4b3a75ea780fb616231748deb5b636f0 +File: /usr/share/man/man9/sim_home_switch.9.xz 100644 root:root 4d87d01b0cd7205b0a6db29a55533f50 +File: /usr/share/man/man9/sim_matrix_kb.9.xz 100644 root:root cea556d3b48fafdbc66e857545b94b7f +File: /usr/share/man/man9/sim_parport.9.xz 100644 root:root 3423747fc8069d0267b26ffbe2109186 +File: /usr/share/man/man9/sim_spindle.9.xz 100644 root:root 0a8b73774df577b4ad789c5a9a1d7326 +File: /usr/share/man/man9/simple_tp.9.xz 100644 root:root 352c96cff5a41f17567bb7a790aedd3f +File: /usr/share/man/man9/sphereprobe.9.xz 100644 root:root 4432a75687422d33f5f53f44a5acd441 +File: /usr/share/man/man9/spindle.9.xz 100644 root:root 616f43f0aeb24d61aecb6748641afdb2 +File: /usr/share/man/man9/spindle_monitor.9.xz 100644 root:root f9853c4a00de2ad14573419cef1fb2d2 File: /usr/share/man/man9/sserial.9.xz 100644 root:root cda27ad79b3b748fe69d3aa6133dbdf9 File: /usr/share/man/man9/stepgen.9.xz 100644 root:root 1151c7075a51ad05e9e82ff643cce6a9 -File: /usr/share/man/man9/steptest.9.xz 100644 root:root 3a0bba1f4d2668a51da6919a5c5eed1a +File: /usr/share/man/man9/steptest.9.xz 100644 root:root 096ebf59e024330aa742e150e2039f41 File: /usr/share/man/man9/streamer.9.xz 100644 root:root d9c338fb58adf5bd5a815f0b8cdedc68 -File: /usr/share/man/man9/sum2.9.xz 100644 root:root 995ebe8663bbf9e6043b4f8481afb4fe +File: /usr/share/man/man9/sum2.9.xz 100644 root:root 10a220564e1fdb99f4bd3e68fe2d46a8 File: /usr/share/man/man9/supply.9.xz 100644 root:root 760e3e6615392513db8cc348d9c1147b -File: /usr/share/man/man9/thc.9.xz 100644 root:root 21bf276b79cc1db466760ffed22b1090 -File: /usr/share/man/man9/thcud.9.xz 100644 root:root 79eb65e929338dca7ebafc2ccb72d6cd +File: /usr/share/man/man9/thc.9.xz 100644 root:root 251a093e0fef7fae11e3507a7c8cb60c +File: /usr/share/man/man9/thcud.9.xz 100644 root:root 3dd1c33af84cba395ac9046685ae689b File: /usr/share/man/man9/threads.9.xz 100644 root:root 0a89f5af89b5cdf6d132fcfb19ba8726 -File: /usr/share/man/man9/threadtest.9.xz 100644 root:root f13f983a3133c85e1459fc3490c27008 -File: /usr/share/man/man9/time.9.xz 100644 root:root 9ca700cae12c9755fd60fde0ed016d70 -File: /usr/share/man/man9/timedelay.9.xz 100644 root:root f917edc3e0c0b3bd19b4435628a9d2ba -File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 4e18da747aac4371d2fc93b88216bc8c -File: /usr/share/man/man9/tof.9.xz 100644 root:root 4d469aeaa64ebe9be4849481bdd70552 -File: /usr/share/man/man9/toggle.9.xz 100644 root:root 6c9b10a3a5c71c431932965e304ba572 -File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root 02600d9b66dd8432d86a9491a129b1a8 -File: /usr/share/man/man9/ton.9.xz 100644 root:root 512de6d15f586ace175409587611f4b5 -File: /usr/share/man/man9/tp.9.xz 100644 root:root 77adb751b90bd7170edd1e48ff4741d7 -File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 52c0a25f7df262057edb8ad4d30d7447 +File: /usr/share/man/man9/threadtest.9.xz 100644 root:root 5af8528503b7e4d90bd0a51a9dd952a0 +File: /usr/share/man/man9/time.9.xz 100644 root:root 24e1665fa8a34c3bcc8d933fff7f0252 +File: /usr/share/man/man9/timedelay.9.xz 100644 root:root 085d34f0e4c2e63f9cc39099c23cc486 +File: /usr/share/man/man9/timedelta.9.xz 100644 root:root 3d8e7b20ab89b3b6aea137226c5e550a +File: /usr/share/man/man9/tof.9.xz 100644 root:root d5ad742c0bf2ef6938672430bc27eda4 +File: /usr/share/man/man9/toggle.9.xz 100644 root:root 64ce75f419eeb870c295abe63ece1292 +File: /usr/share/man/man9/toggle2nist.9.xz 100644 root:root b7393fa8d359bc092815a5c86266903d +File: /usr/share/man/man9/ton.9.xz 100644 root:root 157b3464e2b4723dc7927aeff617ee74 +File: /usr/share/man/man9/tp.9.xz 100644 root:root db38c56c641b72a804605d2c71941955 +File: /usr/share/man/man9/tpcomp.9.xz 100644 root:root 6bd122643f788132522190e63513e29e File: /usr/share/man/man9/tripodkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root 6122a8b8cabf9b08a76441dfb5e3654e -File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root e7fe41f07c97f162a628810cbab7a21f +File: /usr/share/man/man9/tristate_bit.9.xz 100644 root:root fcaad31860776cfc2c1abcef6c3d0973 +File: /usr/share/man/man9/tristate_float.9.xz 100644 root:root ad8bd31335a20b1ba07530c6789916d3 File: /usr/share/man/man9/trivkins.9.xz 100644 root:root e8da3e4caad62bd5bfa58feca5629c13 -File: /usr/share/man/man9/updown.9.xz 100644 root:root 0d114f7e54735f7a50705ab8b4f40826 -File: /usr/share/man/man9/userkins.9.xz 100644 root:root 727a3f096a343558008b890f6ff83b3c +File: /usr/share/man/man9/updown.9.xz 100644 root:root a209d83ed9d31a0ae4b44727d2296674 +File: /usr/share/man/man9/userkins.9.xz 100644 root:root 4b814eedbad796d7c05022abf472e845 File: /usr/share/man/man9/watchdog.9.xz 100644 root:root 3ccf8bb1e89f95bd9212dab04d95b193 -File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 6d6048d6de1893889c05707ffbd2d7b1 +File: /usr/share/man/man9/wcomp.9.xz 100644 root:root 682ef16972e374aa90ede36c0346d3eb File: /usr/share/man/man9/weighted_sum.9.xz 100644 root:root eb6db3b792484b220170ad1fd6fce770 -File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root a76e0d186e171c5e0eae311f592e6917 -File: /usr/share/man/man9/xor2.9.xz 100644 root:root ef1780b698bac919694bb10b0c43be0f -File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root ebcb7c8f91be63465fd05a1bbbe1f4e8 +File: /usr/share/man/man9/xhc_hb04_util.9.xz 100644 root:root 01ca0d3f923aec32a02a69ba48c06178 +File: /usr/share/man/man9/xor2.9.xz 100644 root:root a05caff730d3465257a2f08bd67f4dd1 +File: /usr/share/man/man9/xyzab_tdr_kins.9.xz 100644 root:root f01f57a9072cdb89ee551cf022099b7f File: /usr/share/qtvcp 40755 root:root @@ -13639,2 +13645,2 @@ File: /usr/share/qtvcp/widgets_ui/virtual_keyboard.ui 100644 root:root e757c13d9a96b2fb641409c70442ded6 -RPMIdentity: c8ea2dcfb2372598e372ae44255571e9a6e23cbbc0954a4a7e26ea782ce48ed86c3e05d706a528f97188d2bd53cd468edf66fb8cef949c94913b7304c5aa1c2c +RPMIdentity: 61375d4ebc57e90d4d0e01cdf25ea601c4e2301b825f6b5bfcd0cb31023aca1309097114694ee75fde96fc260794dccffd8273e22b410837b710d8afaf2776b4 --- linuxcnc-debuginfo-2.9.1-alt1.20231009.i586.rpm.repo 2023-10-09 09:18:31.000000000 +0000 +++ linuxcnc-debuginfo-2.9.1-alt1.20231009.i586.rpm.hasher 2023-10-14 07:38:49.031586781 +0000 @@ -2836,3 +2836,3 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root 3b1731ce3c34108a59f1b3f223f5b9dc +File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.c 100644 root:root c9336217a2cc45ad9e241e9ff21d708e File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/pi500_vfd/pi500_vfd.comp 100644 root:root 36db960cdfb47870d04dc0825e67fbe5 @@ -2847,3 +2847,3 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root eb25de9bd2dd99b7a00cd923481c7f56 +File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.c 100644 root:root dffb9bed04b2e2a638d600776f4e8a63 File: /usr/src/debug/linuxcnc-2.9.1/src/hal/user_comps/wj200_vfd/wj200_vfd.comp 100644 root:root 59df738983b6701d52519fdd79609b2f @@ -2894,127 +2894,127 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs.c 100644 root:root 5e0b6320946129dc03a0500f3a73d03e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs_s32.c 100644 root:root 62df6418f8957ae08d51e0dd2f558592 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/and2.c 100644 root:root 0caddee739d9c43832356309d1806b4f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/anglejog.c 100644 root:root ae9ee9f4e7632a4d3b474640989e34d8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/axistest.c 100644 root:root 397749c04d0e0d02be531b36cf75c642 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bin2gray.c 100644 root:root a0a759deabb40794033b6907b11a3dd0 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/biquad.c 100644 root:root 01aa527c6badf90c404d07d0f90801c0 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitslice.c 100644 root:root 73bc441195e490cc05206bbd83374fb1 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitwise.c 100644 root:root a0c072c25c67f780ce5c5d14b7d5b536 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bldc.c 100644 root:root e1463c0ed9719c54a126109ff46400a0 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/blend.c 100644 root:root 76608300f586b71534bf5ac8937da6c6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/carousel.c 100644 root:root 7dfe04fc4cf36d514d13b0af29264181 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/charge_pump.c 100644 root:root 2a679f561bcd9b06e0c8c821f9f7d983 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke2.c 100644 root:root 40f4504fe15aff2412ae54afb26d3e7a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke3.c 100644 root:root 2f463a91019c79a4d8cd6d76fa7b0904 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarkeinv.c 100644 root:root e8af60ab48d9e8d8e511235992069271 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/comp.c 100644 root:root a20f75918eae54d67427e8e14063203d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/constant.c 100644 root:root 2eb8d409f579e088318b42cdb7863f17 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_float.c 100644 root:root 67cd758e6e6bd9d7ad86e03d0d785a9b -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_s32.c 100644 root:root c2a8f42993d28bd772390a5344b78690 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_u32.c 100644 root:root be105abc1e549c9b25462029919eff71 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_s32.c 100644 root:root 93e6fa330b7f674d675c66af77723c44 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_u32.c 100644 root:root 80816c3966d2423f5ad18d0259d5e30e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_bit.c 100644 root:root bc32982813a453687ce4c8c30f8da3b8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_float.c 100644 root:root 0f2eb2dd7d395fc31c82e51d29c979bb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_u32.c 100644 root:root 0245dbf4a1c2e3f67d06ce8f3dacbc4a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_bit.c 100644 root:root bd7cb6ad2cb254329251c8e36e23d35e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_float.c 100644 root:root 352725008bd6d703ef1a317538421988 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_s32.c 100644 root:root cd9f3ca5031d6c902c66850f4733404f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/corexy_by_hal.c 100644 root:root ed7ae48a2193e35d3f210b18b28fa78f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/dbounce.c 100644 root:root f5cb498dc976233c277c2a617d1c302c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ddt.c 100644 root:root 81e57e5e9d393f176e43186c42cd9a1c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/deadzone.c 100644 root:root c9a8b13a655a67ad6126a13cff47cde3 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/demux.c 100644 root:root 3493fe08b43d041dede6b9a6b3423df9 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/differential.c 100644 root:root 3d8694c8e4008aeeb5c0f7ad92522c47 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/div2.c 100644 root:root 683a9f40dea067daeab148667329109a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/edge.c 100644 root:root 81f033924e8d54391f807b450bc275e4 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/eoffset_per_angle.c 100644 root:root 62cb6c4ca47449468267ecdd3ebe82cb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/estop_latch.c 100644 root:root 3d6daab4c1aa69e3f2cecd01e8cafb91 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/feedcomp.c 100644 root:root a898c5646a8c65c071a6db9acd81ed31 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/filter_kalman.c 100644 root:root 9c12480f71fe7e18e46e14d5d420ac91 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/flipflop.c 100644 root:root b947d81ece074ac5d1d236ba4b367e22 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gantry.c 100644 root:root 2643824f9a0d7ba0210d3eaf48e2b35c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gearchange.c 100644 root:root b50e7d9e8aa7bab1a1e81991cedf4fa6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gray2bin.c 100644 root:root 4f18dda7ef2254e8f9fc59d5f81e78be -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/histobins.c 100644 root:root 0bc8755ba4cbd19c6117a5934f39863a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/homecomp.c 100644 root:root 288204a91359356ba1ebebbb861543e3 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/hypot.c 100644 root:root 4107fe29740dffb93e27af0de92f2411 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ilowpass.c 100644 root:root 6f03403662030762a7f1bf69587492b8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/integ.c 100644 root:root 34e5489dae526779f11836de3c17e88d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/invert.c 100644 root:root d0c0e532354ffba3aba409fe664947c6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/joyhandle.c 100644 root:root 589b4f98c1de99a59fec305162dbaf9e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/knob2float.c 100644 root:root 4c9c9ced3657e8b3ff5f02ce50affd45 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/latencybins.c 100644 root:root 07b1ae75316bfa5eb45b62f0b03ebe31 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit1.c 100644 root:root 57164c06407471a0b525383e1ddcf5ef -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit2.c 100644 root:root b88521ef5771d70253e84b2174a464ae -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit3.c 100644 root:root 45239d970335dd881ad49fd84b65d5b3 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit_axis.c 100644 root:root 3bbe99c5eb804db762dd34c6495ecf6f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lincurve.c 100644 root:root daaa2235b3397716cd0e4250304cc42c -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/logic.c 100644 root:root e7d1be92603699800480bea7b03c398f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lowpass.c 100644 root:root 8804fce1fb9c7f691e26fae1e3a56db5 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lut5.c 100644 root:root 4900283e9bf9571a02278a5047755455 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/maj3.c 100644 root:root 3b3cab90d205d804e5ecd8a1eb3e38b2 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/match8.c 100644 root:root 30f3bc8568e5e5dcfbffb0fb6ac4b24d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/max31855.c 100644 root:root bc711ae4f7f9d0f68f13f1f66d989755 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root 7eb20a8493beea5d847015bd88d2f7af -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/message.c 100644 root:root 106c53b1d4a24c457c8ef4381a90e1e4 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/millturn.c 100644 root:root a89ace8874eb04473d2b5f0eb81b4626 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/minmax.c 100644 root:root 7be8d502682b4c4478486de379da3610 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/moveoff.c 100644 root:root 2551ff773a007d31ca665107258f6056 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mult2.c 100644 root:root 95d60b5adcdc12d1f79cd005744d1627 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiclick.c 100644 root:root 575c1a833cc7834cf6fe0db8de2d3ef5 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiswitch.c 100644 root:root 5b55dc04a85336cc04321570df339452 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux16.c 100644 root:root a1d96767a4d7862ab2c76ad2197f4dca -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux2.c 100644 root:root 1f5a37d33a2ec564a458f4520fd3c6de -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux4.c 100644 root:root fd35d0e2553f761c6423fa29f03395cb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux8.c 100644 root:root 600f17d3aec16a7ba31c42a2f4f696f8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/near.c 100644 root:root 9e3325089887947ea06c62cb6b900b8a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/not.c 100644 root:root ab05546b73ce36a4506653df91bb8210 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/offset.c 100644 root:root e7caa40ec6a993b549ee13ba722dab75 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ohmic.c 100644 root:root e46f4002120baf17fc16d24990191d98 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/oneshot.c 100644 root:root 133a4632450314721a8a8fe94cec8713 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/or2.c 100644 root:root 2ac2a982c896683a8756218c4d9cf179 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/orient.c 100644 root:root cfc078362de430194c1664255df4da90 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/plasmac.c 100644 root:root 7a9dfa55ee3e9e54c6ef805da5c95126 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sample_hold.c 100644 root:root 2d31e44658e4c2e0026558b60adcd6e6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scale.c 100644 root:root 0e1e41d1b14106698d3d21874b2adc3d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scaled_s32_sums.c 100644 root:root c1c2bf424e06376ef6a3637a2d7b88c8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/select8.c 100644 root:root 8c732f111efde91f4c0171fd44633e00 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_axis_hardware.c 100644 root:root d7b05128e59af4d292a6860b80efda3a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_home_switch.c 100644 root:root 8d3c538c0335bfd9c2c36bf7647d9e7a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 5d2aa7212f108de6d694bbbd973479d3 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_parport.c 100644 root:root ea5f02fd1ee15cc7683a073ff4150ada -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_spindle.c 100644 root:root ef4f1121ca8a2f71c713f5d72d2bafbb -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/simple_tp.c 100644 root:root 7c0609a4916b97e6933dde35ff1f462e -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sphereprobe.c 100644 root:root d66ecc30e75c3b232abb77cccb955fe8 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle.c 100644 root:root a195bf61971039a4c06b7a0c48c335e7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle_monitor.c 100644 root:root 22e62cc1c1b1b5493d5d9dd48cc5c1dd -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/steptest.c 100644 root:root 87a6bd39625e66ac5af5d7015c4782f6 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sum2.c 100644 root:root e197985b46bb8547564fadf395004849 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thc.c 100644 root:root da54c122d914c6999a9811372b349689 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thcud.c 100644 root:root e633b58b960186a31ccad8444b200fec -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/threadtest.c 100644 root:root 974a5387cee41a67319bbaba0e49ad08 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/time.c 100644 root:root 04e58c979fe3522235959bc53f0a9cf0 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelay.c 100644 root:root 70396e18f77eb4f3117b68e648f3d27a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelta.c 100644 root:root 177114ce29faa0f7787b7199cd7feebc -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tof.c 100644 root:root bd9541c0cbf1589b26d20c73427c3fb1 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle.c 100644 root:root 0100166f8e363080d82917c16b09a65a -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle2nist.c 100644 root:root 709cd3e872cca439a6524bd96d4cc5c7 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ton.c 100644 root:root a7f73727f65c042282b95ba856a9ff00 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tp.c 100644 root:root 0fb057874ec5c8d077350fe8b5cde765 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_bit.c 100644 root:root 1d74109489be1be8142456e05804c409 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_float.c 100644 root:root 8fe6ef684728f69a5e36d5f1b74ffa58 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/updown.c 100644 root:root adea431d539a8661ccddcdc3286085d0 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/userkins.c 100644 root:root 12198cbd554601060a0b6c7af2116c6f -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/wcomp.c 100644 root:root aa1a619b34e9d17c7181ee5ba088f394 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xhc_hb04_util.c 100644 root:root a902102d658b58631df986e5532d9f27 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xor2.c 100644 root:root 1b574c389574249cde167d09dc4f6d5d -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 35f11490cd51573636b56f0e364bbf2d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs.c 100644 root:root 726d1b71975c601406b9944ceb9d4fee +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/abs_s32.c 100644 root:root 820b556a9f8f44ba4a0bd0b6148e76cc +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/and2.c 100644 root:root b0cf65c8de905e9e6282e3d1b20c0d83 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/anglejog.c 100644 root:root 27c54809455a2affd32047e262f3181d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/axistest.c 100644 root:root a95cb6a5f1e0241f4fa7b7624814fef2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bin2gray.c 100644 root:root 1e50abb1d5e06e5c795f2f3a5012b379 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/biquad.c 100644 root:root 2995a5ab235eaf0777fce79356f0806b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitslice.c 100644 root:root bb896f50f3937514afcde4d87a127901 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bitwise.c 100644 root:root a6740282cce2072c64c744a5fd3e86ff +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/bldc.c 100644 root:root 7f2baaeb5d9e1bb34717f3c40ad55d6f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/blend.c 100644 root:root 01fd903803d27960563aa201206652c0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/carousel.c 100644 root:root 70d79b103da9057bac4ec1b05dd80c6f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/charge_pump.c 100644 root:root 0d91385f793194700a35f6d66ee52461 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke2.c 100644 root:root b88a73748eaf41c9f66d4a645235f48a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarke3.c 100644 root:root d29fc6b83203d491a72f8ba99a0ab06a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/clarkeinv.c 100644 root:root 31740ad7b140e4ad728221f4da1cb4d3 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/comp.c 100644 root:root 472ddde87ee7d3dfdd7505870d517450 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/constant.c 100644 root:root 96bb8f4989bf2b89dcdd4d8951bf1b9f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_float.c 100644 root:root 51eba74c1b9b82d90180bb69f0d0f181 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_s32.c 100644 root:root 213dc996a0757134cd9a7777b70672da +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_bit_u32.c 100644 root:root a8d5435e60aa7b1de6680ebcf40a40fc +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_s32.c 100644 root:root 948b4e0b12db5329510e72d06efb1dc5 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_float_u32.c 100644 root:root f238764b85ca9742c9bb6994287a4f2d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_bit.c 100644 root:root 3887a1c68a61afc72ac2850da21fbefa +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_float.c 100644 root:root b0ca046450b9da895a9534d45711cca8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_s32_u32.c 100644 root:root abb677635985c80b4a42c4d7362b9793 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_bit.c 100644 root:root 78e7df80229d4e6f49158f2f1b5be66d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_float.c 100644 root:root 281301360c132be6de654aa50823acd8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/conv_u32_s32.c 100644 root:root 55a529171ff718a084f0901cbe97bd2b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/corexy_by_hal.c 100644 root:root d0a61ea0be5fab76d94209d4e3902d6f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/dbounce.c 100644 root:root 1454329cc53aea42fa10a1ac6251ec65 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ddt.c 100644 root:root 1a73d38cf862ff05dfeadf4ac1d297be +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/deadzone.c 100644 root:root a8b1db3510b0bd6445a30fe20e9cf772 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/demux.c 100644 root:root 47bfd67ff5ca1839ead519b1c25e1520 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/differential.c 100644 root:root 73f391968baae22107a2b885692dce72 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/div2.c 100644 root:root 02aab999cb9657a028fda9aa124394e2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/edge.c 100644 root:root 01c52c0a7bba0ad8fd857409157c9eb5 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/eoffset_per_angle.c 100644 root:root fc8dd8d6d44cc1c7f108c3fc518585ba +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/estop_latch.c 100644 root:root c95a88d9857fdd15848b09b498538628 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/feedcomp.c 100644 root:root cc396e5efb940265a7e3ed007e5fa382 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/filter_kalman.c 100644 root:root da692777a7ed8f6082dce950adc9ac3d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/flipflop.c 100644 root:root 4bb2cee9791ddc9af9857a6b71ea3535 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gantry.c 100644 root:root 91165c90a10cdcb753b253c7fff702e4 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gearchange.c 100644 root:root dce373bd2adc47145005c269427ae18e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/gray2bin.c 100644 root:root 35d12e791b9f44f010f7081d175107d0 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/histobins.c 100644 root:root 311aae698e76c38fe5f8a426a8bf343e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/homecomp.c 100644 root:root dbaed225e75831f17947f8c837d49286 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/hypot.c 100644 root:root 8b1f134f59ef21d5226251df441c4051 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ilowpass.c 100644 root:root 253c34607b7db5783bfe8c1a45582b5a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/integ.c 100644 root:root c951ca4a8fcb844cf6cee2752c24ef33 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/invert.c 100644 root:root ddfbea8a472a5aeb88bc3b600d875d4f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/joyhandle.c 100644 root:root 6f5de06a13d08f70695f30fc569d3b2b +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/knob2float.c 100644 root:root f13d24b2a34270fc104dd3e0357cbf05 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/latencybins.c 100644 root:root 19ba429a321d87853576e41c3e5534d5 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit1.c 100644 root:root cec3d47767de45b8c6aa781838592496 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit2.c 100644 root:root 96b00331ecaede874d758b3cd2bae1fa +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit3.c 100644 root:root 1b1b40da536e06e5fc23c4372372e1b9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/limit_axis.c 100644 root:root 0122760d6c728484aecf86623925cd19 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lincurve.c 100644 root:root 0f54576d6aa947283251ea49578b2022 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/logic.c 100644 root:root 1219a74d900d1916c58ad058f8aaf983 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lowpass.c 100644 root:root 2ca8f489b46af3afec8afe9aee24e741 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/lut5.c 100644 root:root b995ea71c5604ac3d57b5c239322e628 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/maj3.c 100644 root:root 559914c2a8b423e1ed2052035ae8937c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/match8.c 100644 root:root d292051d43c01365b292ea599b9bcc38 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/max31855.c 100644 root:root 27137139658d6cde78f729cf2a20a1fe +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mesa_pktgyro_test.c 100644 root:root f684a15e7e3edb49a871637a58850579 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/message.c 100644 root:root 24d53c3a31d6a5e9709770d1fc009ae2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/millturn.c 100644 root:root ad43ed9927f336b6f604e7abefaf9e9a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/minmax.c 100644 root:root 586c8f19243f05e634bf551df55ada74 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/moveoff.c 100644 root:root 8d85baee2c7dd06eef41d91a2417fb18 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mult2.c 100644 root:root 7b1d13d894d75ae4896ca98dfb35874f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiclick.c 100644 root:root 4b28c5807d452abd7af9db0db7741c7d +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/multiswitch.c 100644 root:root f37dcce2c479c7c5e3a5118581741f05 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux16.c 100644 root:root effb8fd7370086977722872a1626abea +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux2.c 100644 root:root a499f788a1a0be8413b51f7a297e4609 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux4.c 100644 root:root 28920f48369f7e80faff626bb738b592 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/mux8.c 100644 root:root 61dc8caaa4a4eeaa3e494f582787a133 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/near.c 100644 root:root de710771d6df0ca3c94c62a31fd0ce76 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/not.c 100644 root:root 21dd6a3df3d88520918d99262ce9b683 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/offset.c 100644 root:root 9ac04224a9aaaabb40f8460923e8817e +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ohmic.c 100644 root:root af00a1acb435fcf08385dac2beb9fde5 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/oneshot.c 100644 root:root 507f068404855418ced53483689f0a52 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/or2.c 100644 root:root 3dd67ea32a890d8079578de4e571fd22 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/orient.c 100644 root:root b8375aab44870063abbef3efaf90f22a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/plasmac.c 100644 root:root 1a25dff428dbcc9c282891b3732569aa +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sample_hold.c 100644 root:root 046096bc17ddc13a0a96914a1922d053 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scale.c 100644 root:root 37157c2238f2fabc6942554337fadf9f +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/scaled_s32_sums.c 100644 root:root 13f4759d94c40cd3243d2181510ab14c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/select8.c 100644 root:root 8f45477c2f4425788b182bfcddf64031 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_axis_hardware.c 100644 root:root 9a5fc1a8e6c9ef81105defed45875617 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_home_switch.c 100644 root:root 8a110d178b93efba2a7051d4a2016efa +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_matrix_kb.c 100644 root:root 4ba473c64bc1a4c194bfe35c59a3c723 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_parport.c 100644 root:root 089c51385bffc5194b901066878eb3c9 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sim_spindle.c 100644 root:root 52d498077786fc357eeb9dbbaa89f5be +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/simple_tp.c 100644 root:root 6063ad03be4b1a998d2796119ffc3ec7 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sphereprobe.c 100644 root:root e1eec40994dd4c98b5b3a48973e3bcd2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle.c 100644 root:root 9bb434f80d9a2caadfba99e86fbfc919 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/spindle_monitor.c 100644 root:root 432c0563f0f919c2ab377373305ca76c +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/steptest.c 100644 root:root 31831fd7a562921f33721ad5c231b613 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/sum2.c 100644 root:root 45eae5d09640674a5cf84f404271b0d8 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thc.c 100644 root:root 26fd5fbce7d896ea73540989e03085ae +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/thcud.c 100644 root:root cacb0bbe91657e4f058568298d269985 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/threadtest.c 100644 root:root 322e0664ab90fc58164030db0a2d900a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/time.c 100644 root:root 544c4010335eec44d66a0107a73628c1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelay.c 100644 root:root 5102a6d69e7a1ec043cdf644b935d4cc +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/timedelta.c 100644 root:root d768c68bd40f3f873dae332ce200718a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tof.c 100644 root:root 9884ca612b87f533d99c0621511ba9c1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle.c 100644 root:root 6a968339c1f3230c2b17633d1ab0c0be +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/toggle2nist.c 100644 root:root 5121d1e1dfe09054b6d559b47e8f8408 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/ton.c 100644 root:root 76fba2d1710422a4cac04b35e353ed95 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tp.c 100644 root:root 6d3b795fc766e94ca74970d7221009f1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_bit.c 100644 root:root 8b7037e35f19b6e12df20bdd6ffc92f1 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/tristate_float.c 100644 root:root 0e3a73790da330363748d4390db74199 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/updown.c 100644 root:root 83370bdd47d728b47f3e594cab7c220a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/userkins.c 100644 root:root 941ec2df413167404d97aca09c12e80a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/wcomp.c 100644 root:root 1a0b089d773a18a1a0bba80576a3e85a +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xhc_hb04_util.c 100644 root:root f833650e230e3088d756aa3475211e84 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xor2.c 100644 root:root 833d880057b289ca1fda87acdca465e7 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/components/xyzab_tdr_kins.c 100644 root:root 44b5a851e80e602c2c01ea6adff395b4 File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 9442c82ba7570f477b7f02a4379f1ca4 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_uart.c 100644 root:root 115c412b799087f5fee80840d0781817 -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/serport.c 100644 root:root 8c102cbdcdc67c7424b3fa144f02a631 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_7i65.c 100644 root:root 2cae75c59bc68a074dce3206d7de7ca2 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/mesa_uart.c 100644 root:root 48b6d53ff1e2738ddc765b0a25e8c964 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/drivers/serport.c 100644 root:root 1afa169a0791c1aec044065df38c6550 File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps 40755 root:root -File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps/thermistor.c 100644 root:root 6ef73e35e60a415e2d53ee3e71465740 +File: /usr/src/debug/linuxcnc-2.9.1/src/objects/hal/user_comps/thermistor.c 100644 root:root ee67cabdca2cf9d82ee367d07fa0d7cc File: /usr/src/debug/linuxcnc-2.9.1/src/rtapi 40755 root:root @@ -3029,2 +3029,2 @@ File: /usr/src/debug/linuxcnc-2.9.1/src/rtapi/uspace_rtapi_string.c 100644 root:root e93709d53c7b25f0358ac01589652a43 -RPMIdentity: cc06a3bbd9976a23e73caf813b26ad56fbed8f1f96ece3dbcdcd9bb56001b2ed979b8c9184b77bb22f8b5cb0877017a9137565b7d38ea57c4ea25a596673510d +RPMIdentity: 2e84b4f99070d035387dc7a41b6f13fc5d34234ade1bc6cee6dfb6474da7e790ff02f3da0fa4ba399cab8d31d09c6b2df95cd9786d6255e3a17a829f3808adbc